;; Copyright 2006-2013, Matthew Welland.
;;
;; This program is made available under the GNU GPL version 2.0 or
;; greater. See the accompanying file COPYING for details.
;;
;; This program is distributed WITHOUT ANY WARRANTY; without even the
;; implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;; PURPOSE.
;;======================================================================
;; launch a task - this runs on the originating host, tests themselves
;;
;;======================================================================
(use regex regex-case base64 sqlite3 srfi-18)
(import (prefix base64 base64:))
(import (prefix sqlite3 sqlite3:))
(declare (unit launch))
(declare (uses common))
(declare (uses configf))
(declare (uses db))
(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
;;======================================================================
;; ezsteps
;;======================================================================
;; ezsteps were going to be coded as
;; stepname[,predstep1,predstep2 ...] [{VAR1=first,second,third}] command to execute
;; BUT
;; now are
;; stepname {VAR=first,second,third ...} command ...
;; where the {VAR=first,second,third ...} is optional.
;; given an exit code and whether or not logpro was used calculate OK/BAD
;; return #t if we are ok, #f otherwise
(define (steprun-good? logpro exitcode)
(or (eq? exitcode 0)
(and logpro (eq? exitcode 2))))
;; if handed a string, process it, else look for MT_CMDINFO
(define (launch:get-cmdinfo-assoc-list #!key (encoded-cmd #f))
(let ((enccmd (if encoded-cmd encoded-cmd (getenv "MT_CMDINFO"))))
(if enccmd
(read (open-input-string (base64:base64-decode enccmd)))
'())))
(define (launch:execute encoded-cmd)
(let* ((cmdinfo (read (open-input-string (base64:base64-decode encoded-cmd)))))
(setenv "MT_CMDINFO" encoded-cmd)
(if (list? cmdinfo) ;; ((testpath /tmp/mrwellan/jazzmind/src/example_run/tests/sqlitespeed)
;; (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
(let* ((testpath (assoc/default 'testpath cmdinfo)) ;; testpath is the test spec area
(top-path (assoc/default 'toppath cmdinfo))
(work-area (assoc/default 'work-area cmdinfo)) ;; work-area is the test run area
(test-name (assoc/default 'test-name cmdinfo))
(runscript (assoc/default 'runscript cmdinfo))
(ezsteps (assoc/default 'ezsteps cmdinfo))
;; (runremote (assoc/default 'runremote cmdinfo))
(transport (assoc/default 'transport cmdinfo))
(serverinf (assoc/default 'serverinf cmdinfo))
(port (assoc/default 'port cmdinfo))
(run-id (assoc/default 'run-id cmdinfo))
(test-id (assoc/default 'test-id cmdinfo))
(target (assoc/default 'target cmdinfo))
(itemdat (assoc/default 'itemdat cmdinfo))
(env-ovrd (assoc/default 'env-ovrd cmdinfo))
(set-vars (assoc/default 'set-vars cmdinfo)) ;; pre-overrides from -setvar
(runname (assoc/default 'runname cmdinfo))
(megatest (assoc/default 'megatest cmdinfo))
(runtlim (assoc/default 'runtlim cmdinfo))
(mt-bindir-path (assoc/default 'mt-bindir-path cmdinfo))
(keys #f)
(keyvals #f)
(fullrunscript (if (not runscript)
#f
(if (substring-index "/" runscript)
runscript ;; use unadultered if contains slashes
(let ((fulln (conc testpath "/" runscript)))
(if (and (file-exists? fulln)
(file-execute-access? fulln))
fulln
runscript))))) ;; assume it is on the path
(rollup-status 0))
(change-directory top-path)
(debug:print 2 "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
;; Setup the *runremote* global var
(if *runremote* (debug:print 2 "ERROR: I'm not expecting *runremote* to be set at this time"))
;; (set! *runremote* runremote)
;; (set! *transport-type* (string->symbol transport))
(set! keys (cdb:remote-run db:get-keys #f))
(set! keyvals (keys:target->keyval keys target))
;; apply pre-overrides before other variables. The pre-override vars must not
;; clobbers things from the official sources such as megatest.config and runconfigs.config
(if (string? set-vars)
(let ((varpairs (string-split set-vars ",")))
(debug:print 4 "varpairs: " varpairs)
(map (lambda (varpair)
(let ((varval (string-split varpair "=")))
(if (eq? (length varval) 2)
(let ((var (car varval))
(val (cadr varval)))
(debug:print 1 "Adding pre-var/val " var " = " val " to the environment")
(setenv var val)))))
varpairs)))
(setenv "MT_TEST_RUN_DIR" work-area)
(setenv "MT_TEST_NAME" test-name)
(setenv "MT_ITEM_INFO" (conc itemdat))
(setenv "MT_RUNNAME" runname)
(setenv "MT_MEGATEST" megatest)
(setenv "MT_TARGET" target)
(setenv "MT_LINKTREE" (configf:lookup *configdat* "setup" "linktree"))
(if mt-bindir-path (setenv "PATH" (conc (getenv "PATH") ":" mt-bindir-path)))
;; (change-directory top-path)
(if (not (setup-for-run))
(begin
(debug:print 0 "Failed to setup, exiting")
;; (sqlite3:finalize! db)
;; (sqlite3:finalize! tdb)
(exit 1)))
;; Can setup as client for server mode now
;; (client:setup)
(change-directory *toppath*)
(set-megatest-env-vars run-id) ;; these may be needed by the launching process
(change-directory work-area)
(set-run-config-vars run-id keyvals target) ;; (db:get-target db run-id))
;; environment overrides are done *before* the remaining critical envars.
(alist->env-vars env-ovrd)
(set-megatest-env-vars run-id)
(set-item-env-vars itemdat)
(save-environment-as-files "megatest")
;; open-run-close not needed for test-set-meta-info
(tests:set-full-meta-info #f test-id run-id 0 work-area)
;; (tests:test-set-status! test-id "REMOTEHOSTSTART" "n/a" (args:get-arg "-m") #f)
(tests:test-force-state-status! test-id "REMOTEHOSTSTART" "n/a")
(thread-sleep! 0.3) ;; NFS slowness has caused grief here
(if (args:get-arg "-xterm")
(set! fullrunscript "xterm")
(if (and fullrunscript (not (file-execute-access? fullrunscript)))
(system (conc "chmod ug+x " fullrunscript))))
;; We are about to actually kick off the test
;; so this is a good place to remove the records for
;; any previous runs
;; (db:test-remove-steps db run-id testname itemdat)
(let* ((m (make-mutex))
(kill-job? #f)
(exit-info (vector #t #t #t))
(job-thread #f)
(keep-going #t)
(runit (lambda ()
;; (let-values
;; (((pid exit-status exit-code)
;; (run-n-wait fullrunscript)))
;; (tests:test-set-status! test-id "RUNNING" "n/a" #f #f)
;; Since we should have a clean slate at this time there is no need to do
;; any of the other stuff that tests:test-set-status! does. Let's just
;; force RUNNING/n/a
(thread-sleep! 0.3)
(tests:test-force-state-status! test-id "RUNNING" "n/a")
(thread-sleep! 0.3) ;; NFS slowness has caused grief here
;; if there is a runscript do it first
(if fullrunscript
(let ((pid (process-run fullrunscript)))
(let loop ((i 0))
(let-values
(((pid-val exit-status exit-code) (process-wait pid #t)))
(mutex-lock! m)
(vector-set! exit-info 0 pid)
(vector-set! exit-info 1 exit-status)
(vector-set! exit-info 2 exit-code)
(set! rollup-status exit-code)
(mutex-unlock! m)
(if (eq? pid-val 0)
(begin
(thread-sleep! 2)
(loop (+ i 1)))
)))))
;; then, if runscript ran ok (or did not get called)
;; do all the ezsteps (if any)
(if ezsteps
(let* ((testconfig (read-config (conc work-area "/testconfig") #f #t environ-patt: "pre-launch-env-vars")) ;; FIXME??? is allow-system ok here?
(ezstepslst (hash-table-ref/default testconfig "ezsteps" '())))
(hash-table-set! *testconfigs* test-name testconfig) ;; cached for lazy reads later ...
(if (not (file-exists? ".ezsteps"))(create-directory ".ezsteps"))
;; if ezsteps was defined then we are sure to have at least one step but check anyway
(if (not (> (length ezstepslst) 0))
(debug:print 0 "ERROR: ezsteps defined but ezstepslst is zero length")
(let loop ((ezstep (car ezstepslst))
(tal (cdr ezstepslst))
(prevstep #f))
;; check exit-info (vector-ref exit-info 1)
(if (vector-ref exit-info 1)
(let* ((stepname (car ezstep)) ;; do stuff to run the step
(stepinfo (cadr ezstep))
(stepparts (string-match (regexp "^(\\{([^\\}]*)\\}\\s*|)(.*)$") stepinfo))
(stepparms (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each
(stepcmd (list-ref stepparts 3))
(script "") ; "#!/bin/bash\n") ;; yep, we depend on bin/bash FIXME!!!
(logpro-used #f))
;; NB// can safely assume we are in test-area directory
(debug:print 4 "ezsteps:\n stepname: " stepname " stepinfo: " stepinfo " stepparts: " stepparts
" stepparms: " stepparms " stepcmd: " stepcmd)
(if (file-exists? (conc stepname ".logpro"))(set! logpro-used #t))
;; ;; first source the previous environment
;; (let ((prev-env (conc ".ezsteps/" prevstep (if (string-search (regexp "csh")
;; (get-environment-variable "SHELL")) ".csh" ".sh"))))
;; (if (and prevstep (file-exists? prev-env))
;; (set! script (conc script "source " prev-env))))
;; call the command using mt_ezstep
(set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "-") " " stepcmd))
(debug:print 4 "script: " script)
;; DO NOT remote
(db:teststep-set-status! #f test-id stepname "start" "-" #f #f work-area: work-area)
;; now launch
(let ((pid (process-run script)))
(let processloop ((i 0))
(let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
(mutex-lock! m)
(vector-set! exit-info 0 pid)
(vector-set! exit-info 1 exit-status)
(vector-set! exit-info 2 exit-code)
(mutex-unlock! m)
(if (eq? pid-val 0)
(begin
(thread-sleep! 2)
(processloop (+ i 1))))
))
(let ((exinfo (vector-ref exit-info 2))
(logfna (if logpro-used (conc stepname ".html") "")))
;; testing if procedures called in a remote call cause problems (ans: no or so I suspect)
(db:teststep-set-status! #f test-id stepname "end" exinfo #f logfna work-area: work-area))
(if logpro-used
(cdb:test-set-log! *runremote* test-id (conc stepname ".html")))
;; set the test final status
(let* ((this-step-status (cond
((and (eq? (vector-ref exit-info 2) 2) logpro-used) 'warn)
((eq? (vector-ref exit-info 2) 0) 'pass)
(else 'fail)))
(overall-status (cond
((eq? rollup-status 2) 'warn)
((eq? rollup-status 0) 'pass)
(else 'fail)))
(next-status (cond
((eq? overall-status 'pass) this-step-status)
((eq? overall-status 'warn)
(if (eq? this-step-status 'fail) 'fail 'warn))
(else 'fail)))
(next-state "RUNNING")
;; (cond
;; ((null? tal) ;; more to run?
;; "COMPLETED")
;; (else "RUNNING"))
)
(debug:print 4 "Exit value received: " (vector-ref exit-info 2) " logpro-used: " logpro-used
" this-step-status: " this-step-status " overall-status: " overall-status
" next-status: " next-status " rollup-status: " rollup-status)
(case next-status
((warn)
(set! rollup-status 2)
;; NB// test-set-status! does rdb calls under the hood
(tests:test-set-status! test-id next-state "WARN"
(if (eq? this-step-status 'warn) "Logpro warning found" #f)
#f))
((pass)
(tests:test-set-status! test-id next-state "PASS" #f #f))
(else ;; 'fail
(set! rollup-status 1) ;; force fail
(tests:test-set-status! test-id next-state "FAIL" (conc "Failed at step " stepname) #f)
))))
(if (and (steprun-good? logpro-used (vector-ref exit-info 2))
(not (null? tal)))
(loop (car tal) (cdr tal) stepname)))
(debug:print 4 "WARNING: a prior step failed, stopping at " ezstep))))))))
(monitorjob (lambda ()
(let* ((start-seconds (current-seconds))
(calc-minutes (lambda ()
(inexact->exact
(round
(-
(current-seconds)
start-seconds)))))
(kill-tries 0))
(tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area)
(let loop ((minutes (calc-minutes)))
(begin
(set! kill-job? (or (test-get-kill-request test-id) ;; run-id test-name itemdat))
(and runtlim (let* ((run-seconds (- (current-seconds) start-seconds))
(time-exceeded (> run-seconds runtlim)))
(if time-exceeded
(begin
(debug:print-info 0 "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" run-seconds " seconds, limit=" runtlim)
#t)
#f)))))
;; open-run-close not needed for test-set-meta-info
(tests:set-partial-meta-info #f test-id run-id minutes work-area)
(if kill-job?
(begin
(mutex-lock! m)
;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
;; section and the runit section? Or add a loop that tries three times with a 1/4 second
;; between tries?
(let* ((pid (vector-ref exit-info 0)))
(if (number? pid)
(process-signal pid signal/kill)
;; (begin
;; (debug:print 0 "WARNING: Request received to kill job (attempt # " kill-tries ")")
;; (let ((processes (cmd-run->list (conc "pgrep -l -P " pid))))
;; (for-each
;; (lambda (p)
;; (let* ((parts (string-split p))
;; (p-id (if (> (length parts) 0)
;; (string->number (car parts))
;; #f)))
;; (if p-id
;; (begin
;; (debug:print 0 "Killing " (cadr parts) "; kill -9 " p-id)
;; (system (conc "kill -9 " p-id))))))
;; (car processes))
;; (system (conc "kill -9 -" pid))))
(begin
(debug:print 0 "WARNING: Request received to kill job but problem with process, attempting to kill manager process")
(tests:test-set-status! test-id "KILLED" "FAIL"
(args:get-arg "-m") #f)
(sqlite3:finalize! tdb)
(exit 1))))
(set! kill-tries (+ 1 kill-tries))
(mutex-unlock! m)))
;; (sqlite3:finalize! db)
(if keep-going
(begin
(thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses
(if keep-going
(loop (calc-minutes)))))))))) ;; NOTE: Checking twice for keep-going is intentional
(th1 (make-thread monitorjob "monitor job"))
(th2 (make-thread runit "run job")))
(set! job-thread th2)
(thread-start! th1)
(thread-start! th2)
(thread-join! th2)
(set! keep-going #f)
(thread-join! th1)
;; (thread-sleep! 1)
;; (thread-terminate! th1) ;; Not sure if this is a good idea
(thread-sleep! 1) ;; give thread th1 a chance to be done TODO: Verify this is needed. At 0.1 I was getting fail to stop, increased to total of 1.1 sec.
(mutex-lock! m)
(let* ((item-path (item-list->path itemdat))
(testinfo (cdb:get-test-info-by-id *runremote* test-id))) ;; )) ;; run-id test-name item-path)))
;; Am I completed?
(if (member (db:test-get-state testinfo) '("REMOTEHOSTSTART" "RUNNING")) ;; NOTE: It should *not* be REMOTEHOSTSTART but for reasons I don't yet understand it sometimes gets stuck in that state ;; (not (equal? (db:test-get-state testinfo) "COMPLETED"))
(let ((new-state (if kill-job? "KILLED" "COMPLETED") ;; (if (eq? (vector-ref exit-info 2) 0) ;; exited with "good" status
;; "COMPLETED"
;; (db:test-get-state testinfo))) ;; else preseve the state as set within the test
)
(new-status (cond
((not (vector-ref exit-info 1)) "FAIL") ;; job failed to run
((eq? rollup-status 0)
;; if the current status is AUTO then defer to the calculated value (i.e. leave this AUTO)
(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO" "PASS"))
((eq? rollup-status 1) "FAIL")
((eq? rollup-status 2)
;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
(else "FAIL")))) ;; (db:test-get-status testinfo)))
(debug:print-info 1 "Test exited in state=" (db:test-get-state testinfo) ", setting state/status based on exit code of " (vector-ref exit-info 1) " and rollup-status of " rollup-status)
(tests:test-set-status! test-id
new-state
new-status
(args:get-arg "-m") #f)
;; need to update the top test record if PASS or FAIL and this is a subtest
;; NO NEED TO CALL roll-up-pass-fail-counts HERE, THIS IS DONE IN roll-up-pass-fail-counts called by tests:test-set-status!
;; (if (not (equal? item-path ""))
;; (begin
;; (thread-sleep! 0.1) ;; give other processes an opportunity to access the db as rollup is lower priority
;; (cdb:roll-up-pass-fail-counts *runremote* run-id test-name item-path new-status)))
))
;; for automated creation of the rollup html file this is a good place...
(if (not (equal? item-path ""))
(tests:summarize-items #f run-id test-id test-name #f))) ;; don't force - just update if no
(mutex-unlock! m)
(debug:print 2 "Output from running " fullrunscript ", pid " (vector-ref exit-info 0) " in work area "
work-area ":\n====\n exit code " (vector-ref exit-info 2) "\n" "====\n")
(if (not (vector-ref exit-info 1))
(exit 4)))))))
;; set up the very basics needed for doing anything here.
(define (setup-for-run)
;; would set values for KEYS in the environment here for better support of env-override but
;; have chicken/egg scenario. need to read megatest.config then read it again. Going to
;; pass on that idea for now
;; special case
(if (not (hash-table? *configdat*)) ;; no need to re-open on every call
(begin
(set! *configinfo* (find-and-read-config
(if (args:get-arg "-config")(args:get-arg "-config") "megatest.config")
environ-patt: "env-override"
given-toppath: (get-environment-variable "MT_RUN_AREA_HOME")
pathenvvar: "MT_RUN_AREA_HOME"))
(set! *configdat* (if (car *configinfo*)(car *configinfo*) #f))
(set! *toppath* (if (car *configinfo*)(cadr *configinfo*) #f))
(if *toppath*
(setenv "MT_RUN_AREA_HOME" *toppath*) ;; to be deprecated
(debug:print 0 "ERROR: failed to find the top path to your Megatest area."))))
*toppath*)
(define (get-best-disk confdat)
(let* ((disks (hash-table-ref/default confdat "disks" #f))
(best #f)
(bestsize 0))
(if disks
(for-each
(lambda (disk-num)
(let* ((dirpath (cadr (assoc disk-num disks)))
(freespc (if (and (directory? dirpath)
(file-write-access? dirpath))
(get-df dirpath)
(begin
(debug:print 0 "WARNING: path " dirpath " in [disks] section not valid or writable")
0))))
(if (> freespc bestsize)
(begin
(set! best dirpath)
(set! bestsize freespc)))))
(map car disks)))
(if best
best
(begin
(debug:print 0 "ERROR: No valid disks found in megatest.config. Please add some to your [disks] section")
(exit 1)))))
;; Desired directory structure:
;;
;; <linkdir> - <target> - <testname> -.
;; |
;; v
;; <rundir> - <target> - <testname> -|- <itempath(s)>
;;
;; dir stored in test is:
;;
;; <linkdir> - <target> - <testname> [ - <itempath> ]
;;
;; All log file links should be stored relative to the top of link path
;;
;; <target> - <testname> [ - <itempath> ]
;;
(define (create-work-area run-id run-info keyvals test-id test-src-path disk-path testname itemdat)
(let* ((item-path (item-list->path itemdat))
(runname (db:get-value-by-header (db:get-row run-info)
(db:get-header run-info)
"runname"))
;; convert back to db: from rdb: - this is always run at server end
(target (string-intersperse (map cadr keyvals) "/"))
(not-iterated (equal? "" item-path))
;; all tests are found at <rundir>/test-base or <linkdir>/test-base
(testtop-base (conc target "/" runname "/" testname))
(test-base (conc testtop-base (if not-iterated "" "/") item-path))
;; nb// if itempath is not "" then it is prefixed with "/"
(toptest-path (conc disk-path "/" testtop-base))
(test-path (conc disk-path "/" test-base))
;; ensure this exists first as links to subtests must be created there
(linktree (let ((rd (config-lookup *configdat* "setup" "linktree")))
(if rd rd (conc *toppath* "/runs"))))
(lnkbase (conc linktree "/" target "/" runname))
(lnkpath (conc lnkbase "/" testname))
(lnkpathf (conc lnkpath (if not-iterated "" "/") item-path)))
;; Update the rundir path in the test record for all
(cdb:test-set-rundir-by-test-id *runremote* test-id lnkpathf)
(debug:print 2 "INFO:\n lnkbase=" lnkbase "\n lnkpath=" lnkpath "\n toptest-path=" toptest-path "\n test-path=" test-path)
(if (not (file-exists? linktree))
(begin
(debug:print 0 "WARNING: linktree did not exist! Creating it now at " linktree)
(create-directory linktree #t))) ;; (system (conc "mkdir -p " linktree))))
;; create the directory for the tests dir links, this is needed no matter what...
(if (and (not (directory-exists? lnkbase))
(not (file-exists? lnkbase)))
(create-directory lnkbase #t))
;; update the toptest record with its location rundir, cache the path
;; This wass highly inefficient, one db write for every subtest, potentially
;; thousands of unnecessary updates, cache the fact it was set and don't set it
;; again.
;; NB - This is not working right - some top tests are not getting the path set!!!
(if (not (hash-table-ref/default *toptest-paths* testname #f))
(let* ((testinfo (cdb:get-test-info-by-id *runremote* test-id)) ;; run-id testname item-path))
(curr-test-path (if testinfo (db:test-get-rundir testinfo) #f)))
(hash-table-set! *toptest-paths* testname curr-test-path)
;; NB// Was this for the test or for the parent in an iterated test?
(cdb:test-set-rundir! *runremote* run-id testname "" lnkpath) ;; toptest-path)
(if (or (not curr-test-path)
(not (directory-exists? toptest-path)))
(begin
(debug:print-info 2 "Creating " toptest-path " and link " lnkpath)
(create-directory toptest-path #t)
(hash-table-set! *toptest-paths* testname toptest-path)))))
;; Now create the link from the test path to the link tree, however
;; if the test is iterated it is necessary to create the parent path
;; to the iteration. use pathname-directory to trim the path by one
;; level
(if (not not-iterated) ;; i.e. iterated
(let ((iterated-parent (pathname-directory (conc lnkpath "/" item-path))))
(debug:print-info 2 "Creating iterated parent " iterated-parent)
(handle-exceptions
exn
(begin
(debug:print 0 "ERROR: Failed to create directory " iterated-parent ((condition-property-accessor 'exn 'message) exn) ", exiting")
(exit 1))
(create-directory iterated-parent #t))))
(if (symbolic-link? lnkpath)
(handle-exceptions
exn
(begin
(debug:print 0 "ERROR: Failed to remove symlink " lnkpath ((condition-property-accessor 'exn 'message) exn) ", exiting")
(exit 1))
(delete-file lnkpath)))
(if (not (or (file-exists? lnkpath)
(symbolic-link? lnkpath)))
(handle-exceptions
exn
(begin
(debug:print 0 "ERROR: Failed to create symlink " lnkpath ((condition-property-accessor 'exn 'message) exn) ", exiting")
(exit 1))
(create-symbolic-link toptest-path lnkpath)))
;; The toptest path has been created, the link to the test in the linktree has
;; been created. Now, if this is an iterated test the real test dir must be created
(if (not not-iterated) ;; this is an iterated test
(let ((lnktarget (conc lnkpath "/" item-path)))
(debug:print 2 "Setting up sub test run area")
(debug:print 2 " - creating run area in " test-path)
(handle-exceptions
exn
(begin
(debug:print 0 "ERROR: Failed to create directory " test-path ((condition-property-accessor 'exn 'message) exn) ", exiting")
(exit 1))
(create-directory test-path #t))
(debug:print 2
" - creating link from: " test-path "\n"
" to: " lnktarget)
;; If there is already a symlink delete it and recreate it.
(handle-exceptions
exn
(begin
(debug:print 0 "ERROR: Failed to re-create link " lnktarget ((condition-property-accessor 'exn 'message) exn) ", exiting")
(exit))
(if (symbolic-link? lnktarget) (delete-file lnktarget))
(if (not (file-exists? lnktarget)) (create-symbolic-link test-path lnktarget)))))
;; I suspect this section was deleting test directories under some
;; wierd sitations? This doesn't make sense - reenabling the rm -f
;; I honestly don't remember *why* this chunk was needed...
;; (let ((testlink (conc lnkpath "/" testname)))
;; (if (and (file-exists? testlink)
;; (or (regular-file? testlink)
;; (symbolic-link? testlink)))
;; (system (conc "rm -f " testlink)))
;; (system (conc "ln -sf " test-path " " testlink)))
(if (directory? test-path)
(begin
(let* ((ovrcmd (let ((cmd (config-lookup *configdat* "setup" "testcopycmd")))
(if cmd
;; substitute the TEST_SRC_PATH and TEST_TARG_PATH
(string-substitute "TEST_TARG_PATH" test-path
(string-substitute "TEST_SRC_PATH" test-src-path cmd #t) #t)
#f)))
(cmd (if ovrcmd
ovrcmd
(conc "rsync -av" (if (debug:debug-mode 1) "" "q") " " test-src-path "/ " test-path "/"
" >> " test-path "/mt_launch.log 2>> " test-path "/mt_launch.log")))
(status (system cmd)))
(if (not (eq? status 0))
(debug:print 2 "ERROR: problem with running \"" cmd "\"")))
(list lnkpathf lnkpath ))
(list #f #f))))
;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area
;; 4. remotely run the test on allocated host
;; - could be ssh to host from hosts table (update regularly with load)
;; - could be netbatch
;; (launch-test db (cadr status) test-conf))
(define (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat params)
(change-directory *toppath*)
(alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
(list ;; (list "MT_TEST_RUN_DIR" work-area)
(list "MT_RUN_AREA_HOME" *toppath*)
(list "MT_TEST_NAME" test-name)
;; (list "MT_ITEM_INFO" (conc itemdat))
(list "MT_RUNNAME" runname)
;; (list "MT_TARGET" mt_target)
))
(let* ((useshell (let ((ush (config-lookup *configdat* "jobtools" "useshell")))
(if ush
(if (equal? ush "no") ;; must use "no" to NOT use shell
#f
ush)
#t))) ;; default is yes
(launcher (config-lookup *configdat* "jobtools" "launcher"))
(runscript (config-lookup test-conf "setup" "runscript"))
(ezsteps (> (length (hash-table-ref/default test-conf "ezsteps" '())) 0)) ;; don't send all the steps, could be big
(diskspace (config-lookup test-conf "requirements" "diskspace"))
(memory (config-lookup test-conf "requirements" "memory"))
(hosts (config-lookup *configdat* "jobtools" "workhosts"))
(remote-megatest (config-lookup *configdat* "setup" "executable"))
(run-time-limit (configf:lookup test-conf "requirements" "runtimelim"))
;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to
;; allow running from dashboard. Extract the path
;; from the called megatest and convert dashboard
;; or dboard to megatest
(local-megatest (let* ((lm (car (argv)))
(dir (pathname-directory lm))
(exe (pathname-strip-directory lm)))
(conc (if dir (conc dir "/") "")
(case (string->symbol exe)
((dboard) "megatest")
((mtest) "megatest")
((dashboard) "megatest")
(else exe)))))
(test-sig (conc test-name ":" (item-list->path itemdat))) ;; test-path is the full path including the item-path
(work-area #f)
(toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all
(diskpath #f)
(cmdparms #f)
(fullcmd #f) ;; (define a (with-output-to-string (lambda ()(write x))))
(mt-bindir-path #f)
(item-path (item-list->path itemdat))
;; (test-id (cdb:remote-run db:get-test-id #f run-id test-name item-path))
(testinfo (cdb:get-test-info-by-id *runremote* test-id))
(mt_target (string-intersperse (map cadr keyvals) "/"))
(debug-param (append (if (args:get-arg "-debug") (list "-debug" (args:get-arg "-debug")) '())
(if (args:get-arg "-logging")(list "-logging") '()))))
(setenv "MT_ITEMPATH" item-path)
(if hosts (set! hosts (string-split hosts)))
;; set the megatest to be called on the remote host
(if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
(set! mt-bindir-path (pathname-directory remote-megatest))
(if launcher (set! launcher (string-split launcher)))
;; set up the run work area for this test
(set! diskpath (get-best-disk *configdat*))
(if diskpath
(let ((dat (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
(set! work-area (car dat))
(set! toptest-work-area (cadr dat))
(debug:print-info 2 "Using work area " work-area))
(begin
(set! work-area (conc test-path "/tmp_run"))
(create-directory work-area #t)
(debug:print 0 "WARNING: No disk work area specified - running in the test directory under tmp_run")))
(set! cmdparms (base64:base64-encode
(with-output-to-string
(lambda () ;; (list 'hosts hosts)
(write (list (list 'testpath test-path)
;; (list 'runremote *runremote*)
(list 'transport (conc *transport-type*))
(list 'serverinf *server-info*)
(list 'toppath *toppath*)
(list 'work-area work-area)
(list 'test-name test-name)
(list 'runscript runscript)
(list 'run-id run-id )
(list 'test-id test-id )
(list 'itemdat itemdat )
(list 'megatest remote-megatest)
(list 'ezsteps ezsteps)
(list 'target mt_target)
(list 'runtlim (if run-time-limit (common:hms-string->seconds run-time-limit) #f))
(list 'env-ovrd (hash-table-ref/default *configdat* "env-override" '()))
(list 'set-vars (if params (hash-table-ref/default params "-setvars" #f)))
(list 'runname runname)
(list 'mt-bindir-path mt-bindir-path)))))))
;; clean out step records from previous run if they exist
;; (debug:print-info 4 "FIXMEEEEE!!!! This can be removed some day, perhaps move all test records to the test db?")
;; (open-run-close db:delete-test-step-records db test-id)
(change-directory work-area) ;; so that log files from the launch process don't clutter the test dir
(tests:test-set-status! test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
(cond
((and launcher hosts) ;; must be using ssh hostname
(set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms) debug-param)))
;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
(launcher
(set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms) debug-param)))
;; (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms))))
(else
(if (not useshell)(debug:print 0 "WARNING: internal launching will not work well without \"useshell yes\" in your [jobtools] section"))
(set! fullcmd (append (list remote-megatest test-sig "-execute" cmdparms) debug-param (list (if useshell "&" ""))))))
;; (set! fullcmd (list remote-megatest test-sig "-execute" cmdparms (if useshell "&" "")))))
(if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm"))))
(debug:print 1 "Launching " work-area)
;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done
(debug:print 4 "fullcmd: " fullcmd)
(let* ((commonprevvals (alist->env-vars
(hash-table-ref/default *configdat* "env-override" '())))
(testprevvals (alist->env-vars
(hash-table-ref/default test-conf "pre-launch-env-overrides" '())))
(miscprevvals (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
(append (list (list "MT_TEST_RUN_DIR" work-area)
(list "MT_TEST_NAME" test-name)
(list "MT_ITEM_INFO" (conc itemdat))
(list "MT_RUNNAME" runname)
(list "MT_TARGET" mt_target)
(list "MT_ITEMPATH" item-path)
)
itemdat)))
;; Launchwait defaults to true, must override it to turn off wait
(launchwait (if (equal? (configf:lookup *configdat* "setup" "launchwait") "no") #f #t))
(launch-results (apply (if launchwait
cmd-run-with-stderr->list
process-run)
(if useshell
(let ((cmdstr (string-intersperse fullcmd " ")))
(if launchwait
cmdstr
(conc cmdstr " >> mt_launch.log 2>&1")))
(car fullcmd))
(if useshell
'()
(cdr fullcmd)))))
(if (not launchwait) ;; give the OS a little time to allow the process to start
(thread-sleep! 0.01))
(with-output-to-file "mt_launch.log"
(lambda ()
(if (list? launch-results)
(apply print launch-results)
(print "NOTE: launched \"" fullcmd "\"\n but did not wait for it to proceed. Add the following to megatest.config \n[setup]\nlaunchwait yes\n if you have problems with this"))
#:append))
(debug:print 2 "Launching completed, updating db")
(debug:print 2 "Launch results: " launch-results)
(if (not launch-results)
(begin
(print "ERROR: Failed to run " (string-intersperse fullcmd " ") ", exiting now")
;; (sqlite3:finalize! db)
;; good ole "exit" seems not to work
;; (_exit 9)
;; but this hack will work! Thanks go to Alan Post of the Chicken email list
;; NB// Is this still needed? Should be safe to go back to "exit" now?
(process-signal (current-process-id) signal/kill)
))
(alist->env-vars miscprevvals)
(alist->env-vars testprevvals)
(alist->env-vars commonprevvals)
launch-results))
(change-directory *toppath*))