;;======================================================================
;; Copyright 2017, Matthew Welland.
;;
;; This file is part of Megatest.
;;
;; Megatest is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation, either version 3 of the License, or
;; (at your option) any later version.
;;
;; Megatest is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with Megatest. If not, see <http://www.gnu.org/licenses/>.
;;======================================================================
(declare (unit tcp-transportmod))
(declare (uses debugprint))
(declare (uses commonmod))
(declare (uses dbfile))
(declare (uses dbmod))
(declare (uses portlogger))
(use address-info)
(module tcp-transportmod
*
(import scheme
(prefix sqlite3 sqlite3:)
chicken
data-structures
address-info
directory-utils
extras
files
hostinfo
matchable
md5
message-digest
ports
posix
regex
regex-case
s11n
srfi-1
srfi-18
srfi-4
srfi-69
stack
typed-records
tcp-server
tcp
debugprint
commonmod
dbfile
dbmod
portlogger
)
;;======================================================================
;; client
;;======================================================================
;; (define keep-age-param (make-parameter 10)) ;; qif file age, if over move to attic
;; Used ONLY for client
;;
(defstruct tt-conn
host
port
host-port
dbfname
server-id
server-start
pid
)
;; Used for BOTH clients and servers
(defstruct tt
;; client related
(conns (make-hash-table)) ;; dbfname -> conn
;; server related
(state 'starting)
(areapath #f)
(host #f)
(port #f)
(conn #f)
(cleanup-proc #f)
(handler #f) ;; receives data and responds
(socket #f)
(thread #f)
(host-port #f)
(cmd-thread #f)
(ro-mode #f)
(ro-mode-checked #f)
(last-access (current-seconds))
(servinf-file #f)
(last-serv-start 0)
)
;; parameters
;;
(define tt-server-timeout-param (make-parameter 600))
;; make ttdat visible
(define *server-info* #f)
(define (tt:make-remote areapath)
(make-tt areapath: areapath))
;; 1 ... or #f
(define (tt:valid-run-id run-id)
(or (number? run-id)
(not run-id)))
;; do all the busy work of finding and setting up conn for
;; connecting to a server
;;
(define (tt:client-connect-to-server ttdat dbfname run-id testsuite)
(assert (tt:valid-run-id run-id) "FATAL: invalid run-id "run-id)
(let* ((conn (hash-table-ref/default (tt-conns ttdat) dbfname #f))
(server-start-proc (lambda ()
(tt:server-process-run
(tt-areapath ttdat)
testsuite ;; (dbfile:testsuite-name)
(common:find-local-megatest)
run-id))))
(if conn
conn ;; we are already connected to the server
(let* ((sdat (tt:get-current-server-info ttdat dbfname)))
(match sdat
((host port start-time server-id pid dbfname2 servinffile)
(assert (equal? dbfname dbfname2) "FATAL: read server info from wrong file.")
(let* ((host-port (conc host":"port))
(conn (make-tt-conn
host: host
port: port
host-port: host-port
dbfname: dbfname
servinf-file: servinffile
server-id: server-id
server-start: start-time
pid: pid)))
(hash-table-set! (tt-conns ttdat) dbfname conn)
;; verify we can talk to this server
(let* ((ping-res (tt:ping host port server-id)))
(case ping-res
((running) conn)
((starting)
(thread-sleep! 0.5)
(tt:client-connect-to-server ttdat dbfname run-id testsuite))
(else
(let* ((curr-secs (current-seconds)))
;; rm the (last server) would go here
(if (> (- curr-secs (tt-last-serv-start ttdat)) 10)
(begin
(tt-last-serv-start-set! ttdat curr-secs)
(server-start-proc))) ;; start server if 30 sec since last attempt
(thread-sleep! 1)
(tt:client-connect-to-server ttdat dbfname run-id testsuite)))))))
(else
(if (> (- (current-seconds) (tt-last-serv-start ttdat)) 5) ;; really do not want to swamp the machine with servers
(begin
(debug:print-info 0 *default-log-port* "No server found. Starting one for run-id "run-id" in dbfile "dbfname)
(server-start-proc)
(tt-last-serv-start-set! ttdat (current-seconds))))
(thread-sleep! 1)
(tt:client-connect-to-server ttdat dbfname run-id testsuite)))))))
(define (tt:ping host port server-id)
(let* ((res (tt:send-receive-direct host port `(ping #f #f #f)))) ;; please send me your server-id
;;
;; need two threads, one a 5 second timer
;;
(match res
((status errmsg result meta)
(if (equal? result server-id)
(let* ((server-state (alist-ref 'sstate meta)))
;; (debug:print 0 *default-log-port* "Ping to "host":"port" successful.")
(or server-state 'unk)) ;; then we are good
(begin
(debug:print 0 *default-log-port* "WARNING: server-id does not match, expected: "server-id", got: "result)
#f)))
(else
;; (debug:print 0 *default-log-port* "res not in form (status errmsg result meta), got: "res)
#f))))
;; client side handler
;;
;;(tt:handler #<tt> get-keys #f () 2 #f "/home/matt/data/megatest/ext-tests" #f "main.db" "ext-tests" "/home/matt/data/megatest/bin/.22.04/../megatest")
;;
(define (tt:handler ttdat cmd run-id params attemptnum area-dat areapath readonly-mode dbfname testsuite mtexe)
;; NOTE: areapath is passed in and in tt struct. We'll use passed in value for now.
(let* ((conn (tt:client-connect-to-server ttdat dbfname run-id testsuite))) ;; (hash-table-ref/default (tt-conns ttdat) dbfname #f)))
(if conn
;; have connection, call the server
(let* ((res (tt:send-receive ttdat conn cmd run-id params)))
;; res is (status errmsg result meta)
(match res
((status errmsg result meta)
(if (list? meta)
(let* ((delay-wait (alist-ref 'delay-wait meta)))
(if (and (number? delay-wait)
(> delay-wait 0))
(begin
(debug:print 0 *default-log-port* "Server is loaded, delaying "delay-wait" seconds")
(thread-sleep! delay-wait)))))
(case status
((busy) ;; result will be how long the server wants you to delay
(debug:print 0 *default-log-port* "WARNING: server for "dbfname" is overloaded, will try again in "result" seconds.")
(thread-sleep! (if (number? result) result 2))
(tt:handler ttdat cmd run-id params (+ attemptnum 1) area-dat areapath readonly-mode dbfname testsuite mtexe))
((loaded)
(debug:print 0 *default-log-port* "WARNING: server for "dbfname" is loaded, will try again in a 1/4 second.")
(thread-sleep! 0.25)
(tt:handler ttdat cmd run-id params (+ attemptnum 1) area-dat areapath readonly-mode dbfname testsuite mtexe))
(else
result)))
(else
(if (not res)
(let* ((host (tt-conn-host conn))
(port (tt-conn-port conn))
;; (dbfname (tt-conn-port conn)) ;; 192.168.0.127:4242-726924:4.db
(pid (tt-conn-pid conn))
(servinf (conc areapath"/.servinfo/"host":"port"-"pid":"dbfname)))
(hash-table-set! (tt-conns ttdat) dbfname #f)
(if (file-exists? servinf)
(begin
(debug:print 0 *default-log-port* "INFO: no ping response from server "host":"port" for "dbfname)
(if (and (file-exists? servinf)
(> (- (current-seconds)(file-modification-time servinf)) 60))
(begin
(debug:print 0 *default-log-port* "INFO: "servinf" file seems old and no ping response, removing it.")
(handle-exceptions
exn
#f
(delete-file* servinf)))))
(debug:print 0 *default-log-port* "INFO: connection to server "host":"port" broken for "dbfname", but do not see servinf file "servinf))
(tt:handler ttdat cmd run-id params (+ attemptnum 1) area-dat areapath readonly-mode dbfname testsuite mtexe))
(assert #f "FATAL: tt:handler received bad data "res)))))
(begin
(thread-sleep! 1) ;; give it a rest and try again
(tt:handler ttdat cmd run-id params attemptnum area-dat areapath readonly-mode dbfname testsuite mtexe)))))
(define (tt:bid-for-servership run-id)
#f)
;; gets server info and appends path to server file
;; sorts by age, oldest first
;;
;; returns list of (host port startseconds server-id servinfofile)
;;
(define (tt:get-server-info-sorted ttdat dbfname)
(let* ((areapath (tt-areapath ttdat))
(sfiles (tt:find-server areapath dbfname))
(sdats (filter car (map tt:server-get-info sfiles))) ;; first element is #f if the file disappeared while being read
(sorted (sort sdats (lambda (a b)
(< (list-ref a 2)(list-ref b 2)))))
(count 0))
(for-each
(lambda (rec)
(if (or (> (length sorted) 1)
(common:low-noise-print 120 "server info sorted"))
(debug:print 0 *default-log-port* "SERVER #"count": "(string-intersperse (map conc sorted) ", ")))
(set! count (+ count 1)))
sorted)
sorted))
(define (tt:get-current-server-info ttdat dbfname)
(assert (tt-areapath ttdat) "FATAL: areapath not set in ttdat.")
;;
;; TODO - replace most of below with tt;get-server-info-sorted
;;
(let* ((areapath (tt-areapath ttdat))
(sfiles (tt:find-server areapath dbfname))
(sdats (filter car (map tt:server-get-info sfiles))) ;; first element is #f if the file disappeared while being read
(sorted (sort sdats (lambda (a b)
(< (list-ref a 2)(list-ref b 2))))))
(if (null? sorted)
#f ;; we'll want to wait until extra servers have exited
(car sorted))))
(define (tt:send-receive ttdat conn cmd run-id params)
(let* ((host-port (tt-conn-host-port conn)) ;; (conc (tt-conn-host conn)":"(tt-conn-port conn)))
(host (tt-conn-host conn))
(port (tt-conn-port conn))
(dat (list cmd run-id params #f))) ;; no meta data yet
(tt:send-receive-direct host port dat)))
(define (tt:send-receive-direct host port dat)
(assert (number? port) "FATAL: tt:send-receive-direct called with port not a number "port)
(handle-exceptions
exn
#f ;; Add condition-case or better handling here
(let-values (((inp oup)(tcp-connect host port)))
(let ((res (if (and inp oup)
(begin
(serialize dat oup)
(close-output-port oup)
(deserialize inp))
)))
(close-input-port inp)
res))))
;;======================================================================
;; server
;;======================================================================
(define (tt:sync-dbs ttdat)
#f)
;; start the listener and start responding to requests
;;
;; NOTE: organise by dbfname, not run-id so we don't need
;; to pull in more modules
;;
;; This is the routine called in megatest.scm to start a server
;;
;; Server viability is checked in keep-running. Blindly start and run here.
;;
(define (tt:start-server areapath run-id dbfname-in handler keys)
(assert areapath "FATAL: areapath not provided for tt:start-server")
;; is there already a server for this dbfile? Then exit.
(let* ((ttdat (make-tt areapath: areapath))
(dbfname (or dbfname-in (dbmod:run-id->dbfname run-id))))
;; (servers (tt:find-server areapath dbfname))) ;; should use tt:get-current-server-info instead
;; (if (null? servers)
(let* ((dbstruct (dbmod:open-dbmoddb areapath run-id dbfname (dbfile:db-init-proc) keys)))
(tt-handler-set! ttdat (handler dbstruct))
(let* ((tcp-thread (make-thread
(lambda ()
(tt:start-tcp-server ttdat)) ;; start the tcp-server which applies handler to incoming data
"tcp-server-thread"))
(run-thread (make-thread
(lambda ()
(tt:keep-running ttdat dbfname dbstruct)))))
(thread-start! tcp-thread)
(thread-start! run-thread)
(thread-join! run-thread) ;; run thread will exit on timeout or other conditions
(exit)))
;;(begin
;; (debug:print 0 *default-log-port* "INFO: found server(s) already running for db "dbfname", "(string-intersperse servers ",")" Exiting.")
;; (exit)))))
))
(define (tt:keep-running ttdat dbfname dbstruct)
;; verfiy conn for ready
;; listener socket has been started by this stage
;; wait for a port before creating the registration file
;;
(let* ((db-locked-in #f)
(areapath (tt-areapath ttdat))
(nosyncdbpath (conc areapath"/.mtdb"))
(cleanup (lambda ()
(if (tt-cleanup-proc ttdat)
((tt-cleanup-proc ttdat)))
(dbfile:with-no-sync-db nosyncdbpath
(lambda (db)
(db:no-sync-del! db dbfname))))))
(set! *server-info* ttdat)
(let loop ((count 0))
(if (> count 240)
(begin
(debug:print 0 *default-log-port* "FATAL: Could not start a tcp server, giving up.")
(exit 1))
(if (not (tt-port ttdat)) ;; no connection yet
(begin
(thread-sleep! 0.25)
(loop (+ count 1))))))
(tt:create-server-registration-file ttdat dbfname)
;; now start watching the last-access, if it hasn't been touched
;; in over ten seconds we exit
(thread-sleep! 0.05) ;; any real need for delay here?
(let loop ()
(let* ((servers (tt:get-server-info-sorted ttdat dbfname))
(ok (cond
((null? servers) #f) ;; not ok
((equal? (list-ref (car servers) 6) ;; compare the servinfofile
(tt-servinf-file ttdat))
(let* ((res (if db-locked-in
#t
(let* ((success (dbfile:with-no-sync-db
nosyncdbpath
(lambda (db)
(db:no-sync-get-lock-with-id db dbfname (tt-servinf-file ttdat))))))
(if success
(begin
(tt-state-set! ttdat 'running)
(debug:print 0 *default-log-port* "Got server lock for "
dbfname)
(set! db-locked-in #t)
#t)
(begin
(debug:print 0 *default-log-port* "Failed to get server lock for "dbfname)
#f))))))
(if (and res
(common:low-noise-print 120 "top server message"))
(debug:print-info 0 *default-log-port* "Keep running, I'm the top server for "
dbfname" on "(tt-host ttdat)":"(tt-port ttdat)))
res))
(else
(debug:print-info 0 *default-log-port* "I'm not the lead server: "servers)
(let* ((leadsrv (car servers)))
(match leadsrv
((host port startseconds server-id pid dbfname servinfofile)
(let* ((res (tt:ping host port server-id)))
(debug:print-info 0 *default-log-port* "Ping to "host":"port", with server-id "server-id
", and file "servinfofile" returned "res)
(if res
#f ;; not the server, but all good, want to exit
(if (and (file-exists? servinfofile)
(> (- (current-seconds)(file-modification-time servinfofile)) 30))
(begin
;; can't ping and file has been on disk 15 seconds, go ahead and try to remove it
(debug:print-info 0 *default-log-port* "Removing apparently dead server info file: "servinfofile)
(delete-file* servinfofile)
#t) ;; not the server but the server is not reachable
(begin
(debug:print 0 *default-log-port* "I'm not the server but could not ping "host":"port", trying again.")
(thread-sleep! 1) ;; just because
#t)))))
(else ;; should never get here
(debug:print 0 *default-log-port* "BAD SERVER RECORD: "leadsrv)
(assert #f "Bad server record "leadsrv))))))))
(if ok
;; (if (> *api-process-request-count* 0) ;; have requests in flight
;; (tt-last-access-set! ttdat (current-seconds)))
(tt-last-access-set! ttdat *db-last-access*) ;; bit silly, just use db-last-access
(begin
(cleanup)
(exit)))
(let* ((last-update (dbr:dbstruct-last-update dbstruct))
(curr-secs (current-seconds)))
(if (and (eq? (tt-state ttdat) 'running)
(> (- curr-secs last-update) 3)) ;; every 3-4 seconds update the db? maybe this should be refresh the inmem?
(begin
(set! (file-modification-time (tt-servinf-file ttdat)) (current-seconds))
((dbr:dbstruct-sync-proc dbstruct) last-update)
(dbr:dbstruct-last-update-set! dbstruct curr-secs))))
(if (< (- (current-seconds) (tt-last-access ttdat)) (tt-server-timeout-param))
(begin
(thread-sleep! 5)
(loop)))))
(cleanup)
(debug:print 0 *default-log-port* "INFO: Server timed out, exiting.")))
;; ;; given an already set up uconn start the cmd-loop
;; ;;
;; (define (tt:cmd-loop ttdat)
;; (let* ((serv-listener (-socket uconn))
;; (listener (lambda ()
;; (let loop ((state 'start))
;; (let-values (((inp oup)(tcp-accept serv-listener)))
;; ;; (mutex-lock! *send-mutex*) ;; DOESN'T SEEM TO HELP
;; (let* ((rdat (deserialize inp)) ;; '(my-host-port qrykey cmd params)
;; (resp (ulex-handler uconn rdat)))
;; (serialize resp oup)
;; (close-input-port inp)
;; (close-output-port oup)
;; ;; (mutex-unlock! *send-mutex*) ;; DOESN'T SEEM TO HELP
;; )
;; (loop state))))))
;; ;; start N of them
;; (let loop ((thnum 0)
;; (threads '()))
;; (if (< thnum 100)
;; (let* ((th (make-thread listener (conc "listener" thnum))))
;; (thread-start! th)
;; (loop (+ thnum 1)
;; (cons th threads)))
;; (map thread-join! threads)))))
;;
;;
;;
;; (define (wait-and-close uconn)
;; (thread-join! (udat-cmd-thread uconn))
;; (tcp-close (udat-socket uconn)))
;;
;;
(define (tt:shutdown-server ttdat)
(let* ((cleanproc (tt-cleanup-proc ttdat))
(port (tt-port ttdat)))
(tt-state-set! ttdat 'shutdown)
(portlogger:open-run-close portlogger:set-port port "released")
(if cleanproc (cleanproc))
(tcp-close (tt-socket ttdat)) ;; close up ports here
))
;; (define (wait-and-close uconn)
;; (thread-join! (tt-cmd-thread uconn))
;; (tcp-close (tt-socket uconn)))
;; return servid
;; side-effects:
;; ttdat-cleanup-proc is populated with function to remove the serverinfo file
(define (tt:create-server-registration-file ttdat dbfname)
(let* ((areapath (tt-areapath ttdat))
(servdir (tt:get-servinfo-dir areapath))
(host (tt-host ttdat))
(port (tt-port ttdat))
(servinf (conc servdir"/"host":"port"-"(current-process-id)":"dbfname))
(serv-id (tt:mk-signature areapath))
(clean-proc (lambda ()
(delete-file* servinf))))
(assert (and host port) "FATAL: tt:create-server-registration-file called with no conn, dbfname="dbfname)
(tt-cleanup-proc-set! ttdat clean-proc)
(tt-servinf-file-set! ttdat servinf)
(with-output-to-file servinf
(lambda ()
(print "SERVER STARTED: "host":"port" AT "(current-seconds)" server-id: "serv-id" pid: "(current-process-id)" dbfname: "dbfname)))
serv-id))
;; find valid server
;; get servers listed, last part of name must match :<dbfname>
;; if more than one, wait one second and look again
;; future: ping oldest, if alive remove other :<dbfname> files
;;
(define (tt:find-server areapath dbfname)
(let* ((servdir (tt:get-servinfo-dir areapath))
(sfiles (glob (conc servdir"/*:"dbfname))))
sfiles))
;; given a path to a server info file return: host port startseconds server-id pid dbfname logf
;; example of what it's looking for in the log file:
;; SERVER STARTED: 10.38.175.67:50216 AT 1616502350.0 server-id: 4907e90fc55c7a09694e3f658c639cf4
;;
(define (tt:server-get-info logf)
(let ((server-rx (regexp "^SERVER STARTED: (\\S+):(\\d+) AT ([\\d\\.]+) server-id: (\\S+) pid: (\\d+) dbfname: (\\S+)")) ;; SERVER STARTED: host:port AT timesecs server id
(dbprep-rx (regexp "^SERVER: dbprep"))
(dbprep-found 0)
(bad-dat (list #f #f #f #f #f #f logf)))
(let ((fdat (handle-exceptions
exn
(begin
;; WARNING: this is potentially dangerous to blanket ignore the errors
(debug:print-info 0 *default-log-port* "Unable to get server info from "logf", exn=" exn)
'()) ;; no idea what went wrong, call it a bad server, return empty list
(with-input-from-file logf read-lines))))
(if (null? fdat) ;; bad data, return bad-dat
bad-dat
(let loop ((inl (car fdat))
(tail (cdr fdat))
(lnum 0))
(let ((mlst (string-match server-rx inl))
(dbprep (string-match dbprep-rx inl)))
(if dbprep (set! dbprep-found 1))
(if (not mlst)
(if (> lnum 500) ;; give up if more than 500 lines of server log read
bad-dat
(if (null? tail)
bad-dat
(loop (car tail)(cdr tail)(+ lnum 1))))
(match mlst ;; have a not null list
((_ host port start server-id pid dbfname)
(list host
(string->number port)
(string->number start)
server-id
(string->number pid)
dbfname
logf))
(else
(debug:print 0 *default-log-port* "ERROR: did not recognise SERVER line info "mlst)
bad-dat)))))))))
;; Given an area path, start a server process ### NOTE ### > file 2>&1
;; if the target-host is set
;; try running on that host
;; incidental: rotate logs in logs/ dir.
;;
(define (tt:server-process-run areapath testsuite mtexe run-id #!key (profile-mode "")) ;; areapath is *toppath* for a given testsuite area
(assert areapath "FATAL: tt:server-process-run called without areapath defined.")
(assert testsuite "FATAL: tt:server-process-run called without testsuite defined.")
(assert mtexe "FATAL: tt:server-process-run called without mtexe defined.")
;; mtest -server - -m testsuite:ext-tests -db 6.db
(let* ((dbfname (dbmod:run-id->dbfname run-id))
(load (get-normalized-cpu-load))
(nrun (number-of-processes-running (conc "mtest.*server.*"testsuite".*"dbfname))))
(cond
((> load 2.0)
(debug:print 0 *default-log-port* "Normalized load "load" is over the limit of 2.0. Not starting a server.")
(thread-sleep! 1))
((> nrun 100)
(debug:print 0 *default-log-port* nrun" servers running on this host, not starting another.")
(thread-sleep! 1))
(else
(if (not (file-exists? (conc areapath"/logs")))
(create-directory (conc areapath"/logs") #t))
(let* ((logfile (conc areapath "/logs/server-"dbfname"-"(current-process-id)".log")) ;; -" curr-pid "-" target-host ".log"))
(cmdln (conc
mtexe
" -server - ";; (or target-host "-")
" -m testsuite:" testsuite
;; " -run-id " (or run-id "main") ;; NO, we do NOT want to have run id as part of this
" -db " dbfname ;; (dbmod:run-id->dbfname run-id)
" " profile-mode
))) ;; (conc " >> " logfile " 2>&1 &")))))
;; we want the remote server to start in *toppath* so push there
;; (push-directory areapath) ;; use cd in the command line instead
(debug:print 0 *default-log-port* "INFO: Trying to start server in tcp mode (" cmdln ") at "(common:human-time)" for "areapath)
;; (debug:print 0 *default-log-port* "INFO: starting server at " (common:human-time))
(setenv "NBFAKE_QUIET" "yes") ;; BUG: change to with-environment-variable ...
(setenv "NBFAKE_LOG" logfile)
(system (conc "cd "areapath" ; nbfake " cmdln))
(unsetenv "NBFAKE_QUIET")
(unsetenv "NBFAKE_LOG")
;;(pop-directory)
)))))
;;======================================================================
;; tcp connection stuff
;;======================================================================
;; find a port and start tcp-server. This only starts the tcp portion of
;; the server, look at (tt:start-server ...) above for the entry point
;; for the entire server system
;;
(define (tt:start-tcp-server ttdat)
(setup-listener-portlogger ttdat)
(let* ((socket (tt-socket ttdat))
(handler (tt-handler ttdat)))
((make-tcp-server socket handler)
#f ;; yes, send error messages to std-err
)))
;; create a tcp listener and return a populated udat struct with
;; my port, address, hostname, pid etc.
;; return #f if fail to find a port to allocate.
;;
;; if udata-in is #f create the record
;; if there is already a serv-listener return the udata
;;
(define (setup-listener uconn #!optional (port 4242))
(assert (tt? uconn) "FATAL: setup-listener called with wrong struct "uconn)
(handle-exceptions
exn
(if (< port 65535)
(begin
(thread-sleep! 0.25)
(setup-listener uconn (+ port 1)))
#f)
(connect-listener uconn port)))
(define (setup-listener-portlogger uconn)
(let ((port (portlogger:open-run-close portlogger:find-port)))
(assert (tt? uconn) "FATAL: setup-listener called with wrong struct "uconn)
(handle-exceptions
exn
(if (< port 65535)
(begin
(portlogger:open-run-close portlogger:set-failed port)
(thread-sleep! 0.25)
(setup-listener-portlogger uconn))
#f)
(connect-listener uconn port))))
(define (connect-listener uconn port)
;; (tcp-listener-socket LISTENER)(socket-name so)
;; sockaddr-address, sockaddr-port, sockaddr->string
(let* ((tlsn (tcp-listen port 1000 #f)) ;; (tcp-listen TCPPORT [BACKLOG [HOST]])
(addr (tt:get-best-guess-address (get-host-name)))) ;; (get-my-best-address))) ;; (hostinfo-addresses (host-information (current-hostname)))
(tt-port-set! uconn port)
(tt-host-set! uconn addr)
(tt-host-port-set! uconn (conc addr":"port))
(tt-socket-set! uconn tlsn)
uconn))
;;======================================================================
;; utils
;;======================================================================
;; Generate a unique signature for this server
(define (tt:mk-signature areapath)
(message-digest-string (md5-primitive)
(with-output-to-string
(lambda ()
(write (list areapath
(current-process-id)
(argv)))))))
(define (tt:get-best-guess-address hostname)
(let ((res #f))
(for-each
(lambda (adr)
(if (not (eq? (u8vector-ref adr 0) 127))
(set! res adr)))
;; NOTE: This can fail when there is no mention of the host in /etc/hosts. FIXME
(vector->list (hostinfo-addresses (hostname->hostinfo hostname))))
(string-intersperse
(map number->string
(u8vector->list
(if res res (hostname->ip hostname)))) ".")))
(define (tt:get-servinfo-dir areapath)
(let* ((spath (conc areapath"/.servinfo")))
(if (not (file-exists? spath))
(create-directory spath #t))
spath))
;;======================================================================
;; network utilities
;;======================================================================
;; NOTE: Look at address-info egg as alternative to some of this
(define (rate-ip ipaddr)
(regex-case ipaddr
( "^127\\..*" _ 0 )
( "^(10\\.0|192\\.168)\\..*" _ 1 )
( else 2 ) ))
;; Change this to bias for addresses with a reasonable broadcast value?
;;
(define (ip-pref-less? a b)
(> (rate-ip a) (rate-ip b)))
(define (get-my-best-address)
(let ((all-my-addresses (get-all-ips)))
(cond
((null? all-my-addresses)
(get-host-name)) ;; no interfaces?
((eq? (length all-my-addresses) 1)
(car all-my-addresses)) ;; only one to choose from, just go with it
(else
(car (sort all-my-addresses ip-pref-less?))))))
(define (get-all-ips-sorted)
(sort (get-all-ips) ip-pref-less?))
(define (get-all-ips)
(map address-info-host
(filter (lambda (x)
(equal? (address-info-type x) "tcp"))
(address-infos (get-host-name)))))
)