;; Copyright 2006-2011, Matthew Welland.
;;
;; This program is made available under the GNU GPL version 2.0 or
;; greater. See the accompanying file COPYING for details.
;;
;; This program is distributed WITHOUT ANY WARRANTY; without even the
;; implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;; PURPOSE.
(include "common.scm")
(include "megatest-version.scm")
(define help (conc "
Megatest, documentation at http://www.kiatoa.com/fossils/megatest
version " megatest-version "
license GPL, Copyright Matt Welland 2006-2011
Usage: megatest [options]
-h : this help
Process and test running
-runall : run all tests that are not state COMPLETED and status PASS,
CHECK or KILLED
-runtests tst1,tst2 ... : run tests
Run status updates (these require that you are in a test directory
and you have sourced the \"megatest.csh\" or
\"megatest.sh\" file.)
-step stepname
-test-status : set the state and status of a test (use :state and :status)
-setlog logfname : set the path/filename to the final log relative to the test
directory. may be used with -test-status
-set-toplog logfname : set the overall log for a suite of sub-tests
-summarize-items : for an itemized test create a summary html
-m comment : insert a comment for this test
Run data
:runname : required, name for this particular test run
:state : required if updating step state; e.g. start, end, completed
:status : required if updating step status; e.g. pass, fail, n/a
Values and record errors and warnings
-set-values : update or set values in the megatest db
:value : value measured
:expected_value : value expected
:tol : |value-expect| <= tol
:units : name of the units for value, expected_value and tol
:first_err : record an error message
:first_warn : record a warning message
Arbitrary test data loading
-load-test-data : read test specific data for storage in the test_data table
from standard in. Each line is comma delimited with four
fields category,variable,value,comment
Queries
-list-runs patt : list runs matching pattern \"patt\", % is the wildcard
-testpatt patt : in list-runs show only these tests, % is the wildcard
-itempatt patt : in list-runs show only tests with items that match patt
-showkeys : show the keys used in this megatest setup
Misc
-force : override some checks
-xterm : start an xterm instead of launching the test
-remove-runs : remove the data for a run, requires all fields be specified
and :runname ,-testpatt and -itempatt
and -testpatt
-keepgoing : continue running until no jobs are \"LAUNCHED\" or
\"NOT_STARTED\"
-rerun FAIL,WARN... : re-run if called on a test that previously ran (nullified
if -keepgoing is also specified)
-rebuild-db : bring the database schema up to date
-rollup : fill run (set by :runname) with latest test(s) from
prior runs with same keys
-rename-run <runb> : rename run (set by :runname) to <runb>, requires keys
-update-meta : update the tests metadata for all tests
-extract-ods : extract an open document spreadsheet from the database
Helpers
-runstep stepname ... : take remaining params as comand and execute as stepname
log will be in stepname.log. Best to put command in quotes
-logpro file : with -exec apply logpro file to stepname.log, creates
stepname.html and sets log to same
If using make use stepname_logpro.log as your target
Called as " (string-intersperse (argv) " ")))
;; -gui : start a gui interface
;; -config fname : override the runconfig file with fname
;; process args
(define remargs (args:get-args
(argv)
(list "-runtests" ;; run a specific test
"-config" ;; override the config file name
"-execute" ;; run the command encoded in the base64 parameter
"-step"
":runname"
":item"
":runname"
":state"
":status"
"-list-runs"
"-testpatt"
"-itempatt"
"-setlog"
"-set-toplog"
"-runstep"
"-logpro"
"-m"
"-rerun"
"-days"
"-rename-run"
"-to"
;; values and messages
":first_err"
":first_warn"
":value"
":expected_value"
":tol"
":units"
;; misc
"-extract-ods"
"-debug" ;; for *verbosity* > 2
)
(list "-h"
"-force"
"-xterm"
"-showkeys"
"-test-status"
"-set-values"
"-load-test-data"
"-summarize-items"
"-gui"
"-runall" ;; run all tests
"-remove-runs"
"-keepgoing"
"-usequeue"
"-rebuild-db"
"-rollup"
"-update-meta"
"-v" ;; verbose 2, more than normal (normal is 1)
"-q" ;; quiet 0, errors/warnings only
)
args:arg-hash
0))
(if (args:get-arg "-h")
(begin
(print help)
(exit)))
(include "keys.scm")
(include "items.scm")
(include "db.scm")
(include "configf.scm")
(include "process.scm")
(include "launch.scm")
(include "runs.scm")
(include "runconfig.scm")
(include "ods.scm")
(define *didsomething* #f)
;;======================================================================
;; Misc setup stuff
;;======================================================================
(set! *verbosity* (cond
((args:get-arg "-debug")(string->number (args:get-arg "-debug")))
((args:get-arg "-v") 2)
((args:get-arg "-q") 0)
(else 1)))
;;======================================================================
;; Remove old run(s)
;;======================================================================
;; since several actions can be specified on the command line the removal
;; is done first
(define (remove-runs)
(cond
((not (args:get-arg ":runname"))
(debug:print 0 "ERROR: Missing required parameter for -remove-runs, you must specify the run name pattern with :runname patt")
(exit 2))
((not (args:get-arg "-testpatt"))
(debug:print 0 "ERROR: Missing required parameter for -remove-runs, you must specify the test pattern with -testpatt")
(exit 3))
((not (args:get-arg "-itempatt"))
(print "ERROR: Missing required parameter for -remove-runs, you must specify the items with -itempatt")
(exit 4))
((let ((db #f))
(if (not (setup-for-run))
(begin
(debug:print 0 print "Failed to setup, exiting")
(exit 1)))
(set! db (open-db))
(if (not (car *configinfo*))
(begin
(debug:print 0 "ERROR: Attempted to remove test(s) but run area config file not found")
(exit 1))
;; put test parameters into convenient variables
(runs:remove-runs db
(args:get-arg ":runname")
(args:get-arg "-testpatt")
(args:get-arg "-itempatt")))
(sqlite3:finalize! db)
(set! *didsomething* #t)))))
(if (args:get-arg "-remove-runs")
(remove-runs))
;;======================================================================
;; Query runs
;;======================================================================
(if (args:get-arg "-list-runs")
(let* ((db (begin
(setup-for-run)
(open-db)))
(runpatt (args:get-arg "-list-runs"))
(testpatt (args:get-arg "-testpatt"))
(itempatt (args:get-arg "-itempatt"))
(runsdat (db-get-runs db runpatt))
(runs (db:get-rows runsdat))
(header (db:get-header runsdat))
(keys (db-get-keys db))
(keynames (map key:get-fieldname keys)))
;; Each run
(for-each
(lambda (run)
(debug:print 2 "Run: "
(string-intersperse (map (lambda (x)
(db:get-value-by-header run header x))
keynames) "/")
"/"
(db:get-value-by-header run header "runname"))
(let ((run-id (db:get-value-by-header run header "id")))
(let ((tests (db-get-tests-for-run db run-id testpatt itempatt)))
;; Each test
(for-each
(lambda (test)
(format #t
" Test: ~25a State: ~15a Status: ~15a Runtime: ~5@as Time: ~22a Host: ~10a\n"
(conc (db:test-get-testname test)
(if (equal? (db:test-get-item-path test) "")
""
(conc "(" (db:test-get-item-path test) ")")))
(db:test-get-state test)
(db:test-get-status test)
(db:test-get-run_duration test)
(db:test-get-event_time test)
(db:test-get-host test))
(if (not (or (equal? (db:test-get-status test) "PASS")
(equal? (db:test-get-status test) "WARN")
(equal? (db:test-get-state test) "NOT_STARTED")))
(begin
(print " cpuload: " (db:test-get-cpuload test)
"\n diskfree: " (db:test-get-diskfree test)
"\n uname: " (db:test-get-uname test)
"\n rundir: " (db:test-get-rundir test)
)
;; Each test
(let ((steps (db-get-test-steps-for-run db (db:test-get-id test))))
(for-each
(lambda (step)
(format #t
" Step: ~20a State: ~10a Status: ~10a Time ~22a\n"
(db:step-get-stepname step)
(db:step-get-state step)
(db:step-get-status step)
(db:step-get-event_time step)))
steps)))))
tests))))
runs)
(set! *didsomething* #t)
))
;;======================================================================
;; full run
;;======================================================================
;; get lock in db for full run for this directory
;; for all tests with deps
;; walk tree of tests to find head tasks
;; add head tasks to task queue
;; add dependant tasks to task queue
;; add remaining tasks to task queue
;; for each task in task queue
;; if have adequate resources
;; launch task
;; else
;; put task in deferred queue
;; if still ok to run tasks
;; process deferred tasks per above steps
;; run all tests are are Not COMPLETED and PASS or CHECK
(if (args:get-arg "-runall")
(general-run-call
"-runall"
"run all tests"
(lambda (db keys keynames keyvallst)
(let* ((test-names (get-all-legal-tests))) ;; "PROD" is ignored for now
(debug:print 1 "INFO: Attempting to start the following tests...")
(debug:print 1 " " (string-intersperse test-names ","))
(run-tests db test-names)))))
;;======================================================================
;; Rollup into a run
;;======================================================================
(if (args:get-arg "-rollup")
(general-run-call
"-rollup"
"rollup tests"
(lambda (db keys keynames keyvallst)
(let ((n (args:get-arg "-rollup")))
(runs:rollup-run db keys)))))
;;======================================================================
;; Extract a spreadsheet from the runs database
;;======================================================================
(if (args:get-arg "-extract-ods")
(general-run-call
"-extract-ods"
"Make ods spreadsheet"
(lambda (db keys keynames keyvallst)
(let ((outputfile (args:get-arg "-extract-ods"))
(runspatt (args:get-arg ":runname"))
(keyvalalist (keys->alist keys "%")))
(db:extract-ods-file db outputfile keyvalalist (if runspatt runspatt "%"))))))
;;======================================================================
;; run one test
;;======================================================================
;; 1. find the config file
;; 2. change to the test directory
;; 3. update the db with "test started" status, set running host
;; 4. process launch the test
;; - monitor the process, update stats in the db every 2^n minutes
;; 5. as the test proceeds internally it calls megatest as each step is
;; started and completed
;; - step started, timestamp
;; - step completed, exit status, timestamp
;; 6. test phone home
;; - if test run time > allowed run time then kill job
;; - if cannot access db > allowed disconnect time then kill job
(if (args:get-arg "-runtests")
(general-run-call
"-runtests"
"run a test"
(lambda (db keys keynames keyvallst)
(let ((test-names (string-split (args:get-arg "-runtests") ",")))
(run-tests db test-names)))))
;;======================================================================
;; execute the test
;; - gets called on remote host
;; - receives info from the -execute param
;; - passes info to steps via MT_CMDINFO env var (future is to use a dot file)
;; - gathers host info and
;;======================================================================
(if (args:get-arg "-execute")
(let* ((cmdinfo (read (open-input-string (base64:base64-decode (args:get-arg "-execute"))))))
(setenv "MT_CMDINFO" (args:get-arg "-execute"))
(if (list? cmdinfo) ;; ((testpath /tmp/mrwellan/jazzmind/src/example_run/tests/sqlitespeed) (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
(let* ((testpath (assoc/default 'testpath cmdinfo))
(work-area (assoc/default 'work-area cmdinfo))
(test-name (assoc/default 'test-name cmdinfo))
(runscript (assoc/default 'runscript cmdinfo))
(db-host (assoc/default 'db-host cmdinfo))
(run-id (assoc/default 'run-id cmdinfo))
(itemdat (assoc/default 'itemdat cmdinfo))
(env-ovrd (assoc/default 'env-ovrd cmdinfo))
(runname (assoc/default 'runname cmdinfo))
(megatest (assoc/default 'megatest cmdinfo))
(mt-bindir-path (assoc/default 'mt-bindir-path cmdinfo))
(fullrunscript (conc testpath "/" runscript))
(db #f))
(debug:print 2 "Exectuing " test-name " on " (get-host-name))
(change-directory testpath)
(setenv "MT_TEST_RUN_DIR" work-area)
(setenv "MT_TEST_NAME" test-name)
(setenv "MT_ITEM_INFO" (conc itemdat))
(setenv "MT_RUNNAME" runname)
(setenv "MT_MEGATEST" megatest)
(setenv "PATH" (conc (getenv "PATH") ":" mt-bindir-path))
(if (not (setup-for-run))
(begin
(debug:print 0 "Failed to setup, exiting")
(exit 1)))
;; now can find our db
(set! db (open-db))
(change-directory work-area)
(set-run-config-vars db run-id)
;; environment overrides are done *before* the remaining critical envars.
(alist->env-vars env-ovrd)
(set-megatest-env-vars db run-id)
(set-item-env-vars itemdat)
(save-environment-as-files "megatest")
(test-set-meta-info db run-id test-name itemdat)
(test-set-status! db run-id test-name "REMOTEHOSTSTART" "n/a" itemdat (args:get-arg "-m") #f)
(if (args:get-arg "-xterm")
(set! fullrunscript "xterm")
(if (not (file-execute-access? fullrunscript))
(system (conc "chmod ug+x " fullrunscript))))
;; We are about to actually kick off the test
;; so this is a good place to remove the records for
;; any previous runs
;; (db:test-remove-steps db run-id testname itemdat)
;; from here on out we will open and close the db
;; on every access to reduce the probablitiy of
;; contention or stuck access on nfs.
(sqlite3:finalize! db)
(let* ((m (make-mutex))
(kill-job? #f)
(exit-info (make-vector 3))
(job-thread #f)
(runit (lambda ()
;; (let-values
;; (((pid exit-status exit-code)
;; (run-n-wait fullrunscript)))
(let ((pid (process-run fullrunscript)))
(let loop ((i 0))
(let-values
(((pid-val exit-status exit-code) (process-wait pid #t)))
(mutex-lock! m)
(vector-set! exit-info 0 pid)
(vector-set! exit-info 1 exit-status)
(vector-set! exit-info 2 exit-code)
(mutex-unlock! m)
(if (eq? pid-val 0)
(begin
(thread-sleep! 2)
(loop (+ i 1)))
))))))
(monitorjob (lambda ()
(let* ((start-seconds (current-seconds))
(calc-minutes (lambda ()
(inexact->exact
(round
(-
(current-seconds)
start-seconds)))))
(kill-tries 0))
(let loop ((minutes (calc-minutes)))
(let ((db (open-db)))
(set! kill-job? (test-get-kill-request db run-id test-name itemdat))
(test-update-meta-info db run-id test-name itemdat minutes)
(if kill-job?
(begin
(mutex-lock! m)
(let* ((pid (vector-ref exit-info 0)))
(if (number? pid)
(begin
(debug:print 0 "WARNING: Request received to kill job (attempt # " kill-tries ")")
;;(cond
;;((> kill-tries 0) ; 2)
(let ((processes (cmd-run->list (conc "pgrep -l -P " pid))))
(for-each
(lambda (p)
(let* ((parts (string-split p))
(p-id (if (> (length parts) 0)
(string->number (car parts))
#f)))
(if p-id
(begin
(debug:print 0 "Killing " (cadr parts) "; kill -9 " p-id)
(system (conc "kill -9 " p-id))))))
(car processes))
(system (conc "kill -9 " pid))))
;;(let* ((ppid (process-group-id pid))
;; (kcmd (conc "pkill -9 -g " ppid)))
;; ;; (process-signal pid signal/term)
;; ;; (process-signal pid signal/kill)
;; (debug:print 0 "Attempting to kill pid " pid " and children in process group " ppid " with command:\n " kcmd)
;; (debug:print 0 "Children:")
;; (system (conc "pgrep -g -l " ppid))
;; (system kcmd)
;; (sleep 1) ;; give it a rest
;; (test-set-status! db run-id test-name "KILLED" "FAIL"
;; itemdat (args:get-arg "-m"))
;; (sqlite3:finalize! db)
;; (exit 1)))))
(begin
(debug:print 0 "WARNING: Request received to kill job but problem with process, attempting to kill manager process")
(test-set-status! db run-id test-name "KILLED" "FAIL"
itemdat (args:get-arg "-m") #f)
(sqlite3:finalize! db)
(exit 1))))
;; (thread-terminate! job-thread)))
(set! kill-tries (+ 1 kill-tries))
(mutex-unlock! m)))
;; (handle-exceptions
;; exn
;; (begin
;; (debug:print 0 "ERROR: Problem killing process " (vector-ref exit-info 0))
;; (abort exn))
;; (let* ((pid (vector-ref exit-info 0))
;; ;; (pgid (process-group-id pid))
;; ;; (cmd (conc "pkill -9 -P " pgid))
;; )
;; ;; (debug:print 0 "Running \"" cmd "\"")
;; ;; (system cmd)
;; (debug:print 0 "Running \"kill -9 " pid "\"")
;; (system (conc "kill -9 " pid))
;; ;; (process-signal (vector-ref exit-info 0) signal/kill)
;; ))))
(sqlite3:finalize! db)
(thread-sleep! (+ 8 (random 4))) ;; add some jitter to the call home time to spread out the db accesses
(loop (calc-minutes)))))))
(th1 (make-thread monitorjob))
(th2 (make-thread runit)))
(set! job-thread th2)
(thread-start! th1)
(thread-start! th2)
(thread-join! th2)
(mutex-lock! m)
(set! db (open-db))
(let* ((item-path (item-list->path itemdat))
(testinfo (db:get-test-info db run-id test-name item-path)))
(if (not (equal? (db:test-get-state testinfo) "COMPLETED"))
(begin
(debug:print 2 "Test NOT logged as COMPLETED, (state=" (db:test-get-state testinfo) "), updating result")
(test-set-status! db run-id test-name
(if kill-job? "KILLED" "COMPLETED")
(if (vector-ref exit-info 1) ;; look at the exit-status
(if (and (not kill-job?)
(eq? (vector-ref exit-info 2) 0))
"PASS"
"FAIL")
"FAIL") itemdat (args:get-arg "-m") #f)))
;; for automated creation of the rollup html file this is a good place...
(if (not (equal? item-path ""))
(tests:summarize-items db run-id test-name #f)) ;; don't force - just update if no
)
(mutex-unlock! m)
;; (exec-results (cmd-run->list fullrunscript)) ;; (list ">" (conc test-name "-run.log"))))
;; (success exec-results)) ;; (eq? (cadr exec-results) 0)))
(debug:print 2 "Output from running " fullrunscript ", pid " (vector-ref exit-info 0) " in work area "
work-area ":\n====\n exit code " (vector-ref exit-info 2) "\n" "====\n")
(sqlite3:finalize! db)
(if (not (vector-ref exit-info 1))
(exit 4)))))
(set! *didsomething* #t)))
(if (args:get-arg "-step")
(if (not (getenv "MT_CMDINFO"))
(begin
(debug:print 0 "ERROR: MT_CMDINFO env var not set, -step must be called *inside* a megatest invoked environment!")
(exit 5))
(let* ((step (args:get-arg "-step"))
(cmdinfo (read (open-input-string (base64:base64-decode (getenv "MT_CMDINFO")))))
(testpath (assoc/default 'testpath cmdinfo))
(test-name (assoc/default 'test-name cmdinfo))
(runscript (assoc/default 'runscript cmdinfo))
(db-host (assoc/default 'db-host cmdinfo))
(run-id (assoc/default 'run-id cmdinfo))
(itemdat (assoc/default 'itemdat cmdinfo))
(db #f)
(state (args:get-arg ":state"))
(status (args:get-arg ":status")))
(change-directory testpath)
(if (not (setup-for-run))
(begin
(debug:print 0 "Failed to setup, exiting")
(exit 1)))
(set! db (open-db))
(if (and state status)
(teststep-set-status! db run-id test-name step state status itemdat (args:get-arg "-m"))
(begin
(debug:print 0 "ERROR: You must specify :state and :status with every call to -step")
(exit 6)))
(sqlite3:finalize! db)
(set! *didsomething* #t))))
(if (or (args:get-arg "-setlog") ;; since setting up is so costly lets piggyback on -test-status
(args:get-arg "-set-toplog")
(args:get-arg "-test-status")
(args:get-arg "-set-values")
(args:get-arg "-load-test-data")
(args:get-arg "-runstep")
(args:get-arg "-summarize-items"))
(if (not (getenv "MT_CMDINFO"))
(begin
(debug:print 0 "ERROR: MT_CMDINFO env var not set, commands -test-status, -runstep and -setlog must be called *inside* a megatest environment!")
(exit 5))
(let* ((startingdir (current-directory))
(cmdinfo (read (open-input-string (base64:base64-decode (getenv "MT_CMDINFO")))))
(testpath (assoc/default 'testpath cmdinfo))
(test-name (assoc/default 'test-name cmdinfo))
(runscript (assoc/default 'runscript cmdinfo))
(db-host (assoc/default 'db-host cmdinfo))
(run-id (assoc/default 'run-id cmdinfo))
(itemdat (assoc/default 'itemdat cmdinfo))
(db #f)
(state (args:get-arg ":state"))
(status (args:get-arg ":status")))
(change-directory testpath)
(if (not (setup-for-run))
(begin
(debug:print 0 "Failed to setup, exiting")
(exit 1)))
(set! db (open-db))
(if (args:get-arg "-load-test-data")
(db:load-test-data db run-id test-name itemdat))
(if (args:get-arg "-setlog")
(test-set-log! db run-id test-name itemdat (args:get-arg "-setlog")))
(if (args:get-arg "-set-toplog")
(test-set-toplog! db run-id test-name (args:get-arg "-set-toplog")))
(if (args:get-arg "-summarize-items")
(tests:summarize-items db run-id test-name #t)) ;; do force here
(if (args:get-arg "-runstep")
(if (null? remargs)
(begin
(debug:print 0 "ERROR: nothing specified to run!")
(sqlite3:finalize! db)
(exit 6))
(let* ((stepname (args:get-arg "-runstep"))
(logprofile (args:get-arg "-logpro"))
(logfile (conc stepname ".log"))
(cmd (if (null? remargs) #f (car remargs)))
(params (if cmd (cdr remargs) '()))
(exitstat #f)
(shell (last (string-split (get-environment-variable "SHELL") "/")))
(redir (case (string->symbol shell)
((tcsh csh ksh) ">&")
((zsh bash sh ash) "2>&1 >")))
(fullcmd (conc "(" (string-intersperse
(cons cmd params) " ")
") " redir " " logfile)))
;; mark the start of the test
(teststep-set-status! db run-id test-name stepname "start" "n/a" itemdat (args:get-arg "-m"))
;; close the db
(sqlite3:finalize! db)
;; run the test step
(debug:print 2 "INFO: Running \"" fullcmd "\"")
(change-directory startingdir)
(set! exitstat (system fullcmd)) ;; cmd params))
(set! *globalexitstatus* exitstat)
(change-directory testpath)
;; re-open the db
(set! db (open-db))
;; run logpro if applicable ;; (process-run "ls" (list "/foo" "2>&1" "blah.log"))
(if logprofile
(let* ((htmllogfile (conc stepname ".html"))
(oldexitstat exitstat)
(cmd (string-intersperse (list "logpro" logprofile htmllogfile "<" logfile ">" (conc stepname "_logpro.log")) " ")))
(debug:print 2 "INFO: running \"" cmd "\"")
(change-directory startingdir)
(set! exitstat (system cmd))
(set! *globalexitstatus* exitstat) ;; no necessary
(change-directory testpath)
(test-set-log! db run-id test-name itemdat htmllogfile)))
(teststep-set-status! db run-id test-name stepname "end" exitstat itemdat (args:get-arg "-m"))
(sqlite3:finalize! db)
(if (not (eq? exitstat 0))
(exit 254)) ;; (exit exitstat) doesn't work?!?
;; open the db
;; mark the end of the test
)))
(if (or (args:get-arg "-test-status")
(args:get-arg "-set-values"))
(let ((newstatus (cond
((number? status) (if (equal? status 0) "PASS" "FAIL"))
((and (string? status)
(string->number status))(if (equal? (string->number status) 0) "PASS" "FAIL"))
(else status)))
;; transfer relevant keys into a hash to be passed to test-set-status!
;; could use an assoc list I guess.
(otherdata (let ((res (make-hash-table)))
(for-each (lambda (key)
(if (args:get-arg key)
(hash-table-set! res key (args:get-arg key))))
(list ":value" ":tol" ":expected_value" ":first_err" ":first_warn" ":units"))
res)))
(if (and (args:get-arg "-test-status")
(or (not state)
(not status)))
(begin
(debug:print 0 "ERROR: You must specify :state and :status with every call to -test-status\n" help)
(sqlite3:finalize! db)
(exit 6)))
(test-set-status! db run-id test-name state newstatus itemdat (args:get-arg "-m") otherdata)))
(sqlite3:finalize! db)
(set! *didsomething* #t))))
(if (args:get-arg "-showkeys")
(let ((db #f)
(keys #f))
(if (not (setup-for-run))
(begin
(debug:print 0 "Failed to setup, exiting")
(exit 1)))
(set! db (open-db))
(set! keys (db-get-keys db))
(debug:print 1 "Keys: " (string-intersperse (map key:get-fieldname keys) ", "))
(sqlite3:finalize! db)
(set! *didsomething* #t)))
(if (args:get-arg "-gui")
(begin
(debug:print 0 "Look at the dashboard for now")
;; (megatest-gui)
(set! *didsomething* #t)))
;;======================================================================
;; Update the database schema on request
;;======================================================================
(if (args:get-arg "-rebuild-db")
(begin
(if (not (setup-for-run))
(begin
(debug:print 0 "Failed to setup, exiting")
(exit 1)))
;; now can find our db
(set! db (open-db))
(patch-db db)
(sqlite3:finalize! db)
(set! *didsomething* #t)))
;;======================================================================
;; Update the tests meta data from the testconfig files
;;
(if (args:get-arg "-update-meta")
(begin
(if (not (setup-for-run))
(begin
(debug:print 0 "Failed to setup, exiting")
(exit 1)))
;; now can find our db
(set! db (open-db))
(runs:update-all-test_meta db)
(sqlite3:finalize! db)
(set! *didsomething* #t)))
(if (not *didsomething*)
(debug:print 0 help))
(if (not (eq? *globalexitstatus* 0))
(if (or (args:get-arg "-runtests")(args:get-arg "-runall"))
(begin
(debug:print 0 "NOTE: Subprocesses with non-zero exit code detected: " *globalexitstatus*)
(exit 0))
(case *globalexitstatus*
((0)(exit 0))
((1)(exit 1))
((2)(exit 2))
(else (exit 3)))))