;; Copyright 2006-2017, Matthew Welland.
;;
;; This file is part of Megatest.
;;
;; Megatest is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation, either version 3 of the License, or
;; (at your option) any later version.
;;
;; Megatest is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with Megatest. If not, see <http://www.gnu.org/licenses/>.
;;======================================================================
;; launch a task - this runs on the originating host, tests themselves
;;
;;======================================================================
(declare (unit launch))
(declare (uses subrun))
(declare (uses common))
(declare (uses debugprint))
(declare (uses commonmod))
(declare (uses processmod))
(declare (uses configfmod))
(declare (uses configf))
(declare (uses db))
(declare (uses rmtmod))
(declare (uses ezsteps))
;; (declare (uses dbmod))
(declare (uses dbfile))
(declare (uses mtargs))
(use regex regex-case base64 sqlite3 srfi-18 directory-utils posix posix-extras z3
call-with-environment-variables csv hostinfo
typed-records pathname-expand matchable)
(import (prefix base64 base64:)
(prefix sqlite3 sqlite3:)
(prefix mtargs args:)
)
(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "megatest-fossil-hash.scm")
(import commonmod
processmod
configfmod
rmtmod
debugprint
;; dbmod
dbfile)
;;======================================================================
;; ezsteps
;;======================================================================
;; ezsteps were going to be coded as
;; stepname[,predstep1,predstep2 ...] [{VAR1=first,second,third}] command to execute
;; BUT
;; now are
;; stepname {VAR=first,second,third ...} command ...
;; where the {VAR=first,second,third ...} is optional.
;; given an exit code and whether or not logpro was used calculate OK/BAD
;; return #t if we are ok, #f otherwise
(define (steprun-good? logpro exitcode stepparms)
(or (eq? exitcode 0)
(and logpro (member exitcode '( 2 4 6)))
(let* ((params (alist-ref 'params stepparms)) ;; get the params section
(keep-going (if params
(alist-ref "keep-going" params equal?)
#f)))
(debug:print 0 *default-log-port* "keep-going=" keep-going)
(and keep-going (equal? (car keep-going) "yes")))))
;; if handed a string, process it, else look for MT_CMDINFO
(define (launch:get-cmdinfo-assoc-list #!key (encoded-cmd #f))
(let ((enccmd (if encoded-cmd encoded-cmd (getenv "MT_CMDINFO"))))
(if enccmd
(common:read-encoded-string enccmd)
'())))
;; 0 1 2 3
(defstruct launch:einf (pid #t)(exit-status #t)(exit-code #t)(rollup-status 0))
;; return (conc status ": " comment) from the final section so that
;; the comment can be set in the step record in launch.scm
;;
(define (launch:load-logpro-dat run-id test-id stepname)
(let ((cname (conc stepname ".dat")))
(if (common:file-exists? cname)
(let* ((dat (read-config cname #f #f))
(csvr (db:logpro-dat->csv dat stepname))
(csvt (let-values (((fmt-cell fmt-record fmt-csv) (make-format ",")))
(fmt-csv (map list->csv-record csvr))))
(status (configf:lookup dat "final" "exit-status"))
(msg (configf:lookup dat "final" "message")))
(if csvt ;; this if blocked stack dump caused by .dat file from logpro being 0-byte. fixed by upgrading logpro
(rmt:csv->test-data run-id test-id csvt)
(debug:print 0 *default-log-port* "ERROR: no csvdat exists for run-id: " run-id " test-id: " test-id " stepname: " stepname ", check that logpro version is 1.15 or newer"))
;; (debug:print-info 13 *default-log-port* "Error: run-id/test-id/stepname="run-id"/"test-id"/"stepname" => bad csvr="csvr)
;; )
(cond
((equal? status "PASS") "PASS") ;; skip the message part if status is pass
(status (conc (configf:lookup dat "final" "exit-status") ": " (if msg msg "no message")))
(else #f)))
#f)))
(define (launch:manage-steps run-id test-id item-path fullrunscript ezsteps subrun test-name tconfigreg exit-info m)
;; (let-values
;; (((pid exit-status exit-code)
;; (run-n-wait fullrunscript)))
;; (tests:test-set-status! test-id "RUNNING" "n/a" #f #f)
;; Since we should have a clean slate at this time there is no need to do
;; any of the other stuff that tests:test-set-status! does. Let's just
;; force RUNNING/n/a
;; (thread-sleep! 0.3)
;; (tests:test-force-state-status! run-id test-id "RUNNING" "n/a")
(rmt:set-state-status-and-roll-up-items run-id test-name item-path "RUNNING" #f #f)
;; (thread-sleep! 0.3) ;; NFS slowness has caused grief here
;; if there is a runscript do it first
(if fullrunscript
(let ((pid (process-run fullrunscript)))
(rmt:test-set-top-process-pid run-id test-id pid)
(let loop ((i 0))
(let-values
(((pid-val exit-status exit-code) (process-wait pid #t)))
(mutex-lock! m)
(launch:einf-pid-set! exit-info pid) ;; (vector-set! exit-info 0 pid)
(launch:einf-exit-status-set! exit-info exit-status) ;; (vector-set! exit-info 1 exit-status)
(launch:einf-exit-code-set! exit-info exit-code) ;; (vector-set! exit-info 2 exit-code)
(launch:einf-rollup-status-set! exit-info exit-code) ;; (vector-set! exit-info 3 exit-code) ;; rollup status
(mutex-unlock! m)
(if (eq? pid-val 0)
(begin
(thread-sleep! 2)
(loop (+ i 1)))
)))))
;; then, if runscript ran ok (or did not get called)
;; do all the ezsteps (if any)
(if (or ezsteps subrun)
(let* ((test-run-dir (tests:get-test-path-from-environment))
(testconfig ;; (read-config (conc work-area "/testconfig") #f #t environ-patt: "pre-launch-env-vars")) ;; FIXME??? is allow-system ok here?
;; NOTE: it is tempting to turn off force-create of testconfig but dynamic
;; ezstep names need a full re-eval here.
(tests:get-testconfig test-name item-path tconfigreg #t force-create: #t)) ;; 'return-procs)))
(ezstepslst (if (hash-table? testconfig)
(hash-table-ref/default testconfig "ezsteps" '())
#f)))
(if testconfig
(hash-table-set! *testconfigs* test-name testconfig) ;; cached for lazy reads later ...
(begin
(launch:setup)
(debug:print 0 *default-log-port* "WARNING: no testconfig found for " test-name " in search path:\n "
(string-intersperse (tests:get-tests-search-path *configdat*) "\n "))))
;; after all that, still no testconfig? Time to abort
(if (not testconfig)
(begin
(debug:print-error 0 *default-log-port* "Failed to resolve megatest.config, runconfigs.config and testconfig issues. Giving up now")
(exit 1)))
;; create a proc for the subrun if requested, save that proc in the ezsteps table as the last entry
;; 1. get section [runarun]
;; 2. unset MT_* vars
;; 3. fix target
;; 4. fix runname
;; 5. fix testpatt or calculate it from contour
;; 6. launch the run
;; 7. roll up the run result and or roll up the logpro processed result
(when (configf:lookup testconfig "subrun" "runwait") ;; we use runwait as the flag that a subrun is requested
(subrun:initialize-toprun-test testconfig test-run-dir)
(let* ((mt-cmd (subrun:launch-cmd test-run-dir (configf:lookup testconfig "subrun" "runwait"))))
(debug:print-info 0 *default-log-port* "Subrun command is \"" mt-cmd "\"")
(set! ezsteps #t) ;; set the needed flag
(set! ezstepslst
(append (or ezstepslst '())
(list (list "subrun" (conc "{subrun=true} " mt-cmd)))))))
;; process the ezsteps
(if ezsteps
(let* ((all-steps-dat (make-hash-table))) ;; keep all the info around as stepname ==> alist; where 'params is the params list (add other stuff as needed)
(if (not (common:file-exists? ".ezsteps"))(create-directory ".ezsteps"))
;; if ezsteps was defined then we are sure to have at least one step but check anyway
(if (not (> (length ezstepslst) 0))
(debug:print-error 0 *default-log-port* "ezsteps defined but ezstepslst is zero length")
(let ((all-step-names (map car ezstepslst))
(status-file (file-open "ezsteps.status" (+ open/append open/wronly open/creat)))
)
(setenv "MT_STEP_NAMES" (string-intersperse all-step-names " "))
(let loop ((ezstep (car ezstepslst))
(tal (cdr ezstepslst))
(prevstep #f))
(debug:print-info 0 *default-log-port* "Processing ezstep \"" (string-intersperse ezstep " ") "\"")
;; check exit-info (vector-ref exit-info 1)
(if (launch:einf-exit-status exit-info) ;; (vector-ref exit-info 1)
(let* ((logpro-used (ezsteps:runstep ezstep run-id test-id exit-info m tal testconfig all-steps-dat))
(stepname (car ezstep))
(stepparms (hash-table-ref all-steps-dat stepname)))
(setenv "MT_STEP_NAME" stepname)
(pp (hash-table->alist all-steps-dat))
;; if logpro-used read in the stepname.dat file
(if (and logpro-used (common:file-exists? (conc stepname ".dat")))
(launch:load-logpro-dat run-id test-id stepname))
(file-write status-file (conc stepname " " (launch:einf-exit-code exit-info) "\n"))
(if (steprun-good? logpro-used (launch:einf-exit-code exit-info) stepparms)
(if (not (null? tal))
(loop (car tal) (cdr tal) stepname))
(debug:print 0 *default-log-port* "WARNING: step " (car ezstep) " failed. Stopping")))
(debug:print 0 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))
(file-close status-file)
)
))))))
(define (launch:monitor-job run-id test-id item-path fullrunscript ezsteps test-name tconfigreg exit-info m work-area runtlim misc-flags)
(let* ((update-period (string->number (or (configf:lookup *configdat* "setup" "test-stats-update-period") "60")))
(start-seconds (current-seconds))
(calc-minutes (lambda ()
(inexact->exact
(round
(-
(current-seconds)
start-seconds)))))
(kill-tries 0))
;; (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area)
;; (tests:set-full-meta-info test-id run-id (calc-minutes) work-area)
(tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area 10)
(let loop ((minutes (calc-minutes))
(cpu-load (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
(disk-free (get-df (current-directory)))
(last-sync (current-seconds)))
(let* ((over-time (> (current-seconds) (+ last-sync update-period)))
(new-cpu-load (let* ((load (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
(delta (abs (- load cpu-load))))
(if (> delta 0.1) ;; don't bother updating with small changes
load
#f)))
(new-disk-free (let* ((df (if over-time ;; only get df every 30 seconds
(get-df (current-directory))
disk-free))
(delta (abs (- df disk-free))))
(if (and (> df 0)
(> (/ delta df) 0.1)) ;; (> delta 200) ;; ignore changes under 200 Meg
df
#f)))
(do-sync (or new-cpu-load new-disk-free over-time))
(test-info (rmt:get-test-state-status-by-id run-id test-id))
(state (car test-info));; (db:test-get-state test-info))
(status (cdr test-info));; (db:test-get-status test-info))
(killreq (equal? state "KILLREQ"))
(kill-reason "no kill reason specified")
(kill-job? #f))
;; (common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
(cond
(killreq
(set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
(set! kill-job? #t))
((and runtlim (> (- (current-seconds) start-seconds) runtlim))
(set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" (- (current-seconds) start-seconds) " seconds, limit=" runtlim))
(set! kill-job? #t))
((equal? status "DEAD")
(tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)
(rmt:set-state-status-and-roll-up-items run-id test-id 'foo "RUNNING" "n/a" "was marked dead; really still running.")
;;(set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests (might indicate really overloaded server or else overzealous setup.deadtime)") ;; MARK RUNNING
(set! kill-job? #f)))
(debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)
(if (common:low-noise-print 600 "run zombie") ;; every five minutes is plenty
(launch:handle-zombie-tests run-id))
(when do-sync
(tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f))
(if kill-job?
(begin
(debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
(mutex-lock! m)
;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
;; section and the runit section? Or add a loop that tries three times with a 1/4 second
;; between tries?
(let* ((pid1 (launch:einf-pid exit-info)) ;; (vector-ref exit-info 0))
(pid2 (rmt:test-get-top-process-pid run-id test-id))
(pids (delete-duplicates (filter number? (list pid1 pid2)))))
(if (not (null? pids))
(begin
(for-each
(lambda (pid)
(handle-exceptions
exn
(begin
(debug:print-info 0 *default-log-port* "Unable to kill process with pid " pid ", possibly already killed.")
(debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn) ", exn=" exn))
(debug:print 0 *default-log-port* "WARNING: Request received to kill job " pid) ;; " (attempt # " kill-tries ")")
(debug:print-info 0 *default-log-port* "Signal mask=" (signal-mask))
;; (if (process:alive? pid)
;; (begin
(map (lambda (pid-num)
(process-signal pid-num signal/term))
(process:get-sub-pids pid))
(thread-sleep! 5)
;; (if (process:process-alive? pid)
(map (lambda (pid-num)
(handle-exceptions
exn
(begin
(debug:print 0 *default-log-port* " .... had trouble sending kill to " pid-num ", exn=" exn)
#f)
(process-signal pid-num signal/kill)))
(process:get-sub-pids pid))))
;; (debug:print-info 0 *default-log-port* "not killing process " pid " as it is not alive"))))
pids)
;; BB: question to Matt -- does the tests:test-state-status! encompass rollup to toplevel? If not, should it?
(tests:test-set-status! run-id test-id "KILLED" "KILLED" (conc (args:get-arg "-m")" "kill-reason) #f)) ;; BB ADDED kill-reason -- confirm OK with Matt
(begin
(debug:print-error 0 *default-log-port* "Nothing to kill, pid1=" pid1 ", pid2=" pid2)
(tests:test-set-status! run-id test-id "KILLED" "FAILED TO KILL" (conc (args:get-arg "-m")" "kill-reason) #f) ;; BB ADDED kill-reason -- confirm OK with Matt
)))
(mutex-unlock! m)
;; no point in sticking around. Exit now. But run end of run before exiting?
(launch:end-of-run-check run-id)
(exit)))
(if (hash-table-ref/default misc-flags 'keep-going #f) ;; keep originals for cpu-load and disk-free unless they change more than the allowed delta
(begin
(thread-sleep! 6) ;; was 3
(loop (calc-minutes)
(or new-cpu-load cpu-load)
(or new-disk-free disk-free)
(if do-sync (current-seconds) last-sync))))))
(tests:update-central-meta-info run-id test-id (commonmod:get-cpu-load) (get-df (current-directory))(calc-minutes) #f #f))) ;; NOTE: Checking twice for keep-going is intentional
;; read testconfig and create .logpro and script files
;; - use #f for tconfigreg to re-read the testconfigs from disk
;;
(define (launch:extract-scripts-logpro test-dir test-name item-path tconfigreg-in)
(let* ((tconfigreg (or tconfigreg-in
(tests:get-all)))
(tconfig-fname (conc test-dir "/.testconfig"))
(tconfig-tmpfile (conc tconfig-fname ".tmp"))
(tconfig (tests:get-testconfig test-name item-path tconfigreg #t force-create: #t)) ;; 'return-procs)))
(scripts (configf:get-section tconfig "scripts"))
(logpros (configf:get-section tconfig "logpro")))
;; create .testconfig file
(configf:write-alist tconfig tconfig-tmpfile)
(file-move tconfig-tmpfile tconfig-fname #t)
(delete-file* ".final-status")
;; extract scripts from testconfig and write them to files in test run dir
(for-each
(lambda (scriptdat)
(match scriptdat
((name content)
(debug:print-info 2 *default-log-port* "Creating script "(current-directory)"/"name)
(with-output-to-file name
(lambda ()
(print content)))
(change-file-mode name (bitwise-ior perm/irwxg perm/irwxu)))
(else
(debug:print-info 0 "Invalid script definiton found in [scripts] section of testconfig. \"" scriptdat "\""))))
scripts)
;; extract logpro from testconfig and write them to files in test run dir
(for-each
(lambda (logprodat)
(match logprodat
((name content)
(debug:print-info 2 *default-log-port* "Creating logpro file "(current-directory)"/"name".logpro")
(with-output-to-file (conc name".logpro")
(lambda ()
(print content)
;; (change-file-mode name (bitwise-ior perm/irwxg perm/irwxu))
)))
(else
(debug:print-info 0 "Invalid logpro definiton found in [logpro] section of testconfig. \"" logprodat "\""))))
logpros)))
(define (launch:execute encoded-cmd)
(let* ((cmdinfo (common:read-encoded-string encoded-cmd))
(tconfigreg #f))
(setenv "MT_CMDINFO" encoded-cmd)
;;(bb-check-path msg: "launch:execute incoming")
(if (list? cmdinfo) ;; ((testpath /tmp/mrwellan/jazzmind/src/example_run/tests/sqlitespeed)
;; (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
(let* ((testpath (assoc/default 'testpath cmdinfo)) ;; testpath is the test spec area
(top-path (assoc/default 'toppath cmdinfo))
(work-area (assoc/default 'work-area cmdinfo)) ;; work-area is the test run area
(test-name (assoc/default 'test-name cmdinfo))
(runscript (assoc/default 'runscript cmdinfo))
(ezsteps (assoc/default 'ezsteps cmdinfo))
(subrun (assoc/default 'subrun cmdinfo))
;; (runremote (assoc/default 'runremote cmdinfo))
;; (transport (assoc/default 'transport cmdinfo)) ;; not used
;; (serverinf (assoc/default 'serverinf cmdinfo))
;; (port (assoc/default 'port cmdinfo))
(serverurl (assoc/default 'serverurl cmdinfo))
(homehost (assoc/default 'homehost cmdinfo))
(run-id (assoc/default 'run-id cmdinfo))
(test-id (assoc/default 'test-id cmdinfo))
(target (assoc/default 'target cmdinfo))
(areaname (assoc/default 'areaname cmdinfo))
(itemdat (assoc/default 'itemdat cmdinfo))
(env-ovrd (assoc/default 'env-ovrd cmdinfo))
(set-vars (assoc/default 'set-vars cmdinfo)) ;; pre-overrides from -setvar
(runname (assoc/default 'runname cmdinfo))
(megatest (assoc/default 'megatest cmdinfo))
(runtlim (assoc/default 'runtlim cmdinfo))
(contour (assoc/default 'contour cmdinfo))
(item-path (item-list->path itemdat))
(mt-bindir-path (assoc/default 'mt-bindir-path cmdinfo))
(keys #f)
(keyvals #f)
(fullrunscript (if (not runscript)
#f
(if (substring-index "/" runscript)
runscript ;; use unadultered if contains slashes
(let ((fulln (conc work-area "/" runscript)))
(if (and (common:file-exists? fulln)
(file-execute-access? fulln))
fulln
runscript))))) ;; assume it is on the path
(check-work-area (lambda ()
;; NFS might not have propagated the directory meta data to the run host - give it time if needed
(let loop ((count 0))
(if (or (common:directory-exists? work-area)
(> count 10))
(change-directory work-area)
(begin
(debug:print 0 *default-log-port* "INFO: Not starting job yet - directory " work-area " not found")
(thread-sleep! 10)
(loop (+ count 1)))))
(if (not (string=? (common:real-path work-area)(common:real-path (current-directory))))
(begin
(debug:print 0 *default-log-port*
"INFO: we are expecting to be in directory " work-area "\n"
" but we are actually in the directory " (current-directory) "\n"
" doing another change dir.")
(change-directory work-area)))
;; spot check that the files in testpath are available. Too often NFS delays cause problems here.
(let ((files (glob (conc testpath "/*")))
(bad-files '()))
(for-each
(lambda (fullname)
(let* ((fname (pathname-strip-directory fullname))
(targn (conc work-area "/" fname)))
(if (not (file-exists? targn))
(set! bad-files (cons fname bad-files)))))
files)
(if (not (null? bad-files))
(begin
(debug:print 0 *default-log-port* "INFO: test data from " testpath " not copied properly or filesystem problems causing data to not be found. Re-running the copy command.")
(debug:print 0 *default-log-port* "INFO: missing files from " work-area ": " (string-intersperse bad-files ", "))
(launch:test-copy testpath work-area))))
;; one more time, change to the work-area directory
(change-directory work-area)))
) ;; let*
(if contour (setenv "MT_CONTOUR" contour))
;; immediated set some key variables from CMDINFO data, yes, these will be set again below ...
;;
(setenv "MT_TESTSUITENAME" areaname)
(setenv "MT_RUN_AREA_HOME" top-path)
(set! *toppath* top-path)
(change-directory *toppath*) ;; temporarily switch to the run area home
(setenv "MT_TEST_RUN_DIR" work-area)
(launch:setup) ;; should be properly in the run area home now
(if contour (setenv "MT_CONTOUR" contour))
;; immediated set some key variables from CMDINFO data, yes, these will be set again below ...
;;
(setenv "MT_TESTSUITENAME" areaname)
(setenv "MT_RUN_AREA_HOME" top-path)
(set! *toppath* top-path)
(change-directory *toppath*) ;; temporarily switch to the run area home
(setenv "MT_TEST_RUN_DIR" work-area)
(launch:setup) ;; should be properly in the run area home now
(set! tconfigreg (tests:get-all)) ;; mapping of testname => test source path
(let ((sighand (lambda (signum)
;; (signal-mask! signum) ;; to mask or not? seems to cause issues in exiting
(if (eq? signum signal/stop)
(debug:print-error 0 *default-log-port* "attempt to STOP process. Exiting."))
(set! *time-to-exit* #t)
(debug:print 0 *default-log-port* "Received signal " signum ", cleaning up before exit (set this test to COMPLETED/ABORT) . Please wait...")
(let ((th1 (make-thread (lambda ()
(debug:print 0 *default-log-port* "set test to COMPLETED/ABORT begin.")
(rmt:test-set-state-status run-id test-id "COMPLETED" "ABORT" "received kill signal")
(debug:print 0 *default-log-port* "set test to COMPLETED/ABORT complete.")
(debug:print 0 *default-log-port* "Killed by signal " signum ". Exiting")
(exit 1))))
(th2 (make-thread (lambda ()
(thread-sleep! 20)
(debug:print 0 *default-log-port* "Done")
(exit 4)))))
(thread-start! th2)
(thread-start! th1)
(thread-join! th2)))))
(set-signal-handler! signal/int sighand)
(set-signal-handler! signal/term sighand)
) ;; (set-signal-handler! signal/stop sighand)
;; Do not run the test if it is REMOVING, RUNNING, KILLREQ or REMOTEHOSTSTART,
;; Mark the test as REMOTEHOSTSTART *IMMEDIATELY*
;;
(let* ((test-info (let loop ((tries 0))
(let ((tinfo (rmt:get-test-info-by-id run-id test-id)))
(if tinfo
tinfo
(if (> tries 5)
#f
(begin
(thread-sleep! (+ 1 (* tries 10)))
(loop (+ tries 1))))))))
(test-host (if test-info
(db:test-get-host test-info)
(begin
(debug:print 0 *default-log-port* "ERROR: failed to find a record for test-id " test-id ", exiting.")
(exit))))
(test-pid (db:test-get-process_id test-info)))
(cond
;; -mrw- I'm removing KILLREQ from this list so that a test in KILLREQ state is treated as a "do not run" flag.
((member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
(debug:print 0 *default-log-port* "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")
(rmt:general-call 'set-test-start-time run-id test-id)
(rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
) ;; prime it for running
((member (db:test-get-state test-info) '("RUNNING" "REMOTEHOSTSTART"))
(if (process:alive-on-host? test-host test-pid)
(debug:print-error 0 *default-log-port* "test state is " (db:test-get-state test-info) " and process " test-pid " is still running on host " test-host ", cannot proceed")
(exit 1)))
((member (db:test-get-state test-info) '("COMPLETED")) ;; we do NOT want to re-run COMPLETED jobs. Mark as NOT_STARTED to run!
(debug:print 0 *default-log-port* "test state is " (db:test-get-state test-info) ", cannot proceed")
(debug:print 0 *default-log-port* "exiting with status 1")
(exit 1))
((not (member (db:test-get-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ")))
;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")
(rmt:general-call 'set-test-start-time run-id test-id)
(rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f))
(else ;; (member (db:test-get-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ"))
(debug:print 0 *default-log-port* "test state is " (db:test-get-state test-info) ", cannot proceed")
(debug:print 0 *default-log-port* "exiting with status 1")
(exit 1))))
;; cleanup prior execution's steps
(rmt:delete-steps-for-test! run-id test-id)
(debug:print 2 *default-log-port* "Executing " test-name " (id: " test-id ") on " (get-host-name))
(set! keys (rmt:get-keys))
;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
;; one of these is defunct/redundant ...
(if (not (launch:setup force-reread: #t))
(begin
(debug:print 0 *default-log-port* "Failed to setup, exiting")
;; (sqlite3:finalize! db)
;; (sqlite3:finalize! tdb)
(exit 1)))
;; validate that the test run area is available
(check-work-area)
;; still need to go back to run area home for next couple steps
(change-directory *toppath*)
;; NOTE: Current order is to process runconfigs *before* setting the MT_ vars. This
;; seems non-ideal but could well break stuff
;; BUG? BUG? BUG?
(let ((rconfig (full-runconfigs-read)) ;; (read-config (conc *toppath* "/runconfigs.config") #f #t sections: (list "default" target))))
(wconfig (read-config "waivers.config" #f #t sections: `( "default" ,target )))) ;; read the waivers config if it exists
;; (setup-env-defaults (conc *toppath* "/runconfigs.config") run-id (make-hash-table) keyvals target)
;; (set-run-config-vars run-id keyvals target) ;; (db:get-target db run-id))
;; Now have runconfigs data loaded, set environment vars
(for-each
(lambda (section)
(for-each
(lambda (varval)
(let ((var (car varval))
(val (cadr varval)))
(if (and (string? var)(string? val))
(begin
(safe-setenv var (configf:eval-string-in-environment val))) ;; val)
(debug:print-error 0 *default-log-port* "bad variable spec, " var "=" val))))
(configf:get-section rconfig section)))
(list "default" target)))
;;(bb-check-path msg: "launch:execute post block 1")
;; NFS might not have propagated the directory meta data to the run host - give it time if needed
(let loop ((count 0))
(if (or (common:file-exists? work-area)
(> count 10))
(change-directory work-area)
(begin
(debug:print 0 *default-log-port* "INFO: Not starting job yet - directory " work-area " not found")
(thread-sleep! 10)
(loop (+ count 1)))))
;; now we can switch to the work-area?
(change-directory work-area)
;;(bb-check-path msg: "launch:execute post block 1.5")
;; (change-directory work-area)
(set! keyvals (keys:target->keyval keys target))
;; apply pre-overrides before other variables. The pre-override vars must not
;; clobbers things from the official sources such as megatest.config and runconfigs.config
(if (string? set-vars)
(let ((varpairs (string-split set-vars ",")))
(debug:print 4 *default-log-port* "varpairs: " varpairs)
(map (lambda (varpair)
(let ((varval (string-split varpair "=")))
(if (eq? (length varval) 2)
(let ((var (car varval))
(val (cadr varval)))
(debug:print 1 *default-log-port* "Adding pre-var/val " var " = " val " to the environment")
(setenv var val)))))
varpairs)))
;;(bb-check-path msg: "launch:execute post block 2")
(for-each
(lambda (varval)
(let ((var (car varval))
(val (cadr varval)))
(if val
(setenv var val)
(begin
(debug:print-error 0 *default-log-port* "required variable " var " does not have a valid value. Exiting")
(exit)))))
(list
(list "MT_TEST_RUN_DIR" work-area)
(list "MT_TEST_NAME" test-name)
(list "MT_ITEM_INFO" (conc itemdat))
(list "MT_ITEMPATH" item-path)
(list "MT_RUNNAME" runname)
(list "MT_MEGATEST" megatest)
(list "MT_TARGET" target)
(list "MT_LINKTREE" (common:get-linktree)) ;; (configf:lookup *configdat* "setup" "linktree"))
(list "MT_TESTSUITENAME" (common:get-testsuite-name))))
;;(bb-check-path msg: "launch:execute post block 3")
(let ((tmppath (getenv "PATH")))
(if (string-search tmppath " ")
(debug:print 0 *default-log-port* "WARNING: spaces in PATH are not supported."))
(if mt-bindir-path (setenv "PATH" (conc tmppath":"mt-bindir-path))))
;;(bb-check-path msg: "launch:execute post block 4")
;; (change-directory top-path)
;; Can setup as client for server mode now
;; (client:setup)
;; environment overrides are done *before* the remaining critical envars.
(alist->env-vars env-ovrd)
;;(bb-check-path msg: "launch:execute post block 41")
(runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals)
;;(bb-check-path msg: "launch:execute post block 42")
(set-item-env-vars itemdat)
;;(bb-check-path msg: "launch:execute post block 43")
(let ((blacklist (configf:lookup *configdat* "setup" "blacklistvars")))
(if blacklist
(let ((vars (string-split blacklist)))
(save-environment-as-files "megatest" ignorevars: vars)
(for-each (lambda (var)
(unsetenv var))
vars))
(save-environment-as-files "megatest")))
;;(bb-check-path msg: "launch:execute post block 44")
;; open-run-close not needed for test-set-meta-info
;; (tests:set-full-meta-info #f test-id run-id 0 work-area)
;; (tests:set-full-meta-info test-id run-id 0 work-area)
(tests:set-full-meta-info #f test-id run-id 0 work-area 10)
;; (thread-sleep! 0.3) ;; NFS slowness has caused grief here
(if (args:get-arg "-xterm")
(set! fullrunscript "xterm")
(if (and fullrunscript
(common:file-exists? fullrunscript)
(not (file-execute-access? fullrunscript)))
(system (conc "chmod ug+x " fullrunscript))))
(launch:extract-scripts-logpro work-area test-name item-path tconfigreg)
;;;;; ;; We are about to actually kick off the test
;;;;; ;; so this is a good place to remove the records for
;;;;; ;; any previous runs
;;;;; ;; (db:test-remove-steps db run-id testname itemdat)
;;;;; ;; now is also a good time to write the .testconfig file
;;;;; (let* ((tconfig-fname (conc work-area "/.testconfig"))
;;;;; (tconfig-tmpfile (conc tconfig-fname ".tmp"))
;;;;; (tconfig (tests:get-testconfig test-name item-path tconfigreg #t force-create: #t)) ;; 'return-procs)))
;;;;; (scripts (configf:get-section tconfig "scripts"))
;;;;; (precmd (configf:lookup tconfig )
;;;;; ;; create .testconfig file
;;;;; (configf:write-alist tconfig tconfig-tmpfile)
;;;;; (file-move tconfig-tmpfile tconfig-fname #t)
;;;;; (delete-file* ".final-status")
;;;;;
;;;;; ;; extract scripts from testconfig and write them to files in test run dir
;;;;; (for-each
;;;;; (lambda (scriptdat)
;;;;; (match scriptdat
;;;;; ((name content)
;;;;; (with-output-to-file name
;;;;; (lambda ()
;;;;; (print content)
;;;;; (change-file-mode name (bitwise-ior perm/irwxg perm/irwxu)))))
;;;;; (else
;;;;; (debug:print-info 0 "Invalid script definiton found in [scripts] section of testconfig. \"" scriptdat "\""))))
;;;;; scripts))
;;
(let* ((m (make-mutex))
(kill-job? #f)
(exit-info (make-launch:einf pid: #t exit-status: #t exit-code: #t rollup-status: 0)) ;; pid exit-status exit-code (i.e. process was successfully run) rollup-status
(job-thread #f)
;; (keep-going #t)
(misc-flags (let ((ht (make-hash-table)))
(hash-table-set! ht 'keep-going #t)
ht))
(runit (lambda ()
(launch:manage-steps run-id test-id item-path fullrunscript ezsteps subrun test-name tconfigreg exit-info m)))
(monitorjob (lambda ()
(launch:monitor-job run-id test-id item-path fullrunscript ezsteps test-name tconfigreg exit-info m work-area runtlim misc-flags)))
(th1 (make-thread monitorjob "monitor job"))
(th2 (make-thread runit "run job"))
(tconfig (tests:get-testconfig test-name item-path tconfigreg #t))
(propagate-exit-code (configf:lookup *configdat* "setup" "propagate-exit-code"))
(propagate-status-list '("FAIL" "KILLED" "ABORT" "DEAD" "CHECK" "SKIP" "WAIVED"))
(test-status "not set")
(precmd (configf:lookup tconfig "setup" "precmd"))
(postcmd (configf:lookup tconfig "setup" "postcmd")))
;; first, if set, run the precmd
(if precmd ;; (file-exists? precmd)(file-execute-access? precmd))
(system precmd)) ;; up to test author to put nbfake if desired.
(set! job-thread th2)
(thread-start! th1)
(thread-start! th2)
(thread-join! th2)
(debug:print-info 0 *default-log-port* "Megatest execute of test " test-name ", item path " item-path " complete. Notifying the db ...")
(debug:print-info 2 *default-log-port* "exit-info = " exit-info)
(hash-table-set! misc-flags 'keep-going #f)
(thread-join! th1)
(thread-sleep! 1) ;; givbe thread th1 a chance to be done TODO: Verify this is needed. At 0.1 I was getting fail to stop, increased to total of 1.1 sec.
(mutex-lock! m)
(let* ((item-path (item-list->path itemdat))
;; only state and status needed - use lazy routine
(testinfo (rmt:get-testinfo-state-status run-id test-id)))
;; Am I completed?
(if (member (db:test-get-state testinfo) '("REMOTEHOSTSTART" "RUNNING"))
(let ((new-state (if kill-job? "KILLED" "COMPLETED"))
(new-status (cond
((not (launch:einf-exit-status exit-info)) "FAIL") ;; job failed to run ... (vector-ref exit-info 1)
((eq? (launch:einf-rollup-status exit-info) 0) ;; (vector-ref exit-info 3)
;; if the current status is AUTO then defer to the calculated value (i.e. leave this AUTO)
(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO" "PASS"))
((eq? (launch:einf-rollup-status exit-info) 1) "FAIL") ;; (vector-ref exit-info 3)
((eq? (launch:einf-rollup-status exit-info) 2) ;; (vector-ref exit-info 3)
;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
((eq? (launch:einf-rollup-status exit-info) 3) "CHECK")
((eq? (launch:einf-rollup-status exit-info) 4) "WAIVED")
((eq? (launch:einf-rollup-status exit-info) 5) "ABORT")
((eq? (launch:einf-rollup-status exit-info) 6) "SKIP")
(else "FAIL")))
) ;; (db:test-get-status testinfo)))
(debug:print-info 0 *default-log-port* "Test exited in state=" (db:test-get-state testinfo) ", setting state/status based on exit code of " (launch:einf-exit-status exit-info) " and rollup-status of " (launch:einf-rollup-status exit-info))
;; Leave a .final-status file for each sub-test
(tests:save-final-status run-id test-id)
(tests:test-set-status! run-id
test-id
new-state
new-status
(args:get-arg "-m") #f)
;; need to update the top test record if PASS or FAIL and this is a subtest
;; NO NEED TO CALL set-state-status-and-roll-up-items HERE, THIS IS DONE IN set-state-status-and-roll-up-items called by tests:test-set-status!
)
)
;; for automated creation of the rollup html file this is a good place...
(if (not (equal? item-path ""))
(tests:summarize-items run-id test-id test-name #f))
;; BUG was this meant to be the antecnt of the if above?
;; BUG was this meant to be the antecnt of the if above?
(tests:summarize-test run-id test-id) ;; don't force - just update if no
;; Leave a .final-status file for the top level test
(tests:save-final-status run-id test-id)
(rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id))) ;; end of let*
(mutex-unlock! m)
(launch:end-of-run-check run-id )
(debug:print 2 *default-log-port* "Output from running " fullrunscript ", pid " (launch:einf-pid exit-info) " in work area "
work-area ":\n====\n exit code " (launch:einf-exit-code exit-info) "\n" "====\n")
(set! test-status (db:test-get-status (rmt:get-testinfo-state-status run-id test-id)))
;; If the propagate-exit-code option has been set in the megatest config, and the test status matches the list, set the exit code to 1.
(if postcmd
(system postcmd))
(if (and propagate-exit-code (string=? propagate-exit-code "yes") (member test-status propagate-status-list))
(begin
(debug:print 1 *default-log-port* "Setting exit status to 1 because of test status of " test-status)
(set! *globalexitstatus* 1)
)
)
(if (not (launch:einf-exit-status exit-info))
(exit 4))))
)))
;; Spec for End of test
;; At end of each test call, after marking self as COMPLETED do run-state-status-rollup
;; At transition to run COMPLETED/X do hooks
;; Definition: test_dead if event_time + duration + 1 minute? < current_time AND
;; we can prove the process is not alive (ssh host pstree -A pid)
;; if dead safe to mark the test as killed in the db
;; State/status table
;; new
;; 100% COMPLETED/ (PASS,FAIL,ABORT etc.) ==> COMPLETED / X where X is same as itemized rollup
;; > 3 RUNNING with not test_dead do nothing (run should already be RUNNING/ na
;; > 0 RUNNING and test_dead then send KILLREQ ==> COMPLETED
;; 0 RUNNING ==> this is actually the first condition, should not get here
(define *last-rollup* 0)
(define (launch:end-of-run-check run-id )
(let* ((not-completed-cnt (rmt:get-not-completed-cnt run-id))
(running-cnt (rmt:get-count-tests-running-for-run-id run-id))
(all-test-launched (rmt:get-var (conc "lunch-complete-" run-id)))
(current-state-status (rmt:get-run-state-status run-id))
(current-state (car current-state-status)) ;; (rmt:get-run-state run-id))
(current-status (cdr current-state-status))) ;; (rmt:get-run-status run-id)))
;;get-vars run-id to query metadata table to check if all completed. if all-test-launched = yes then only not-completed-cnt = 0 means everyting is completed if no entry found in the table do nothing
(debug:print 0 *default-log-port* "Running test cnt :" running-cnt)
;;
;; TODO: add a final rollup when run is done (if there isn't one already)
;;
(if (or (< running-cnt 3) ;; have only few running
(> (- (current-seconds) *last-rollup*) 10)) ;; or haven't rolled up in past ten seconds
(begin
(rmt:set-state-status-and-roll-up-run run-id current-state current-status)
(set! *last-rollup* (current-seconds))))
(runs:update-junit-test-reporter-xml run-id)
(cond
((and all-test-launched (eq? not-completed-cnt 0) (equal? all-test-launched "yes" ))
(if (and (equal? (rmt:get-var (conc "end-of-run-" run-id)) "no") (common:simple-lock (conc "endOfRun" run-id)))
(begin
(debug:print 4 *default-log-port* "look for post hook. currseconds: " (current-seconds) " EOR " (rmt:get-var (conc "end-of-run-" run-id)))
(debug:print 0 *default-log-port* "End of Run Detected.")
(rmt:set-var (conc "end-of-run-" run-id) "yes")
;(thread-sleep! 10)
(runs:run-post-hook run-id)
(debug:print 4 *default-log-port* "currseconds: " (current-seconds)" eor: " (rmt:get-var (conc "end-of-run-" run-id)))
(common:simple-unlock (conc "endOfRun" run-id)))
(debug:print 0 *default-log-port* "End of Run Detected but not running post hook. This should happen when eor is set to yes. This will happen only when 2 tests exit at smae time. eor= " (rmt:get-var (conc "end-of-run-" run-id)))))
((> running-cnt 3)
(debug:print 0 *default-log-port* "There are " running-cnt " tests running." ))
((> running-cnt 0)
(debug:print 0 *default-log-port* "running cnt > 0 but <= 3 kill-running-tests-if-dead" )
(let ((kill-cnt (launch:kill-tests-if-dead run-id)))
(if (and all-test-launched (equal? all-test-launched "yes") (eq? kill-cnt running-cnt))
(launch:end-of-run-check run-id)))) ;;todo
(else (debug:print 0 *default-log-port* "Should it get here?? May be everything is not launched yet. Running test cnt:" running-cnt " Not completed test cnt:" not-completed-cnt)
(let* ((not-completed-tests (rmt:get-tests-for-run run-id "%" `("NOT_STARTED" "RUNNING" "LAUNCHED" "REMOTEHOSTSTART") `() #f #f #f #f #f #f #f #f)))
(if (> (length not-completed-tests) 0)
(let loop ((running-test (car not-completed-tests))
(tal (cdr not-completed-tests)))
(let* ((test-name (vector-ref running-test 2))
(item-path (vector-ref running-test 11)))
(debug:print 0 *default-log-port* "test " test-name "/" item-path " not completed")
(if (not (null? tal))
(loop (car tal) (cdr tal)))))))))))
(define (launch:kill-tests-if-dead run-id)
(let* ((running-tests (rmt:get-tests-for-run run-id "%" `("RUNNING" "LAUNCHED" "REMOTEHOSTSTART") `() #f #f #f #f #f #f #f #f)))
(let loop ((running-test (car running-tests))
(tal (cdr running-tests))
(kill-cnt 0))
(let* ((test-name (vector-ref running-test 2))
(item-path (vector-ref running-test 11))
(test-id (vector-ref running-test 0))
(host (vector-ref running-test 6))
(pid (rmt:test-get-top-process-pid run-id test-id))
(event-time (vector-ref running-test 5))
(duration (vector-ref running-test 12))
(flag 0)
(curr-time (current-seconds)))
(if (and (< (+ event-time duration 600) curr-time) (not (commonmod:is-test-alive host pid))) ;;test has not updated duration in last 10 min then likely its not running but confirm before marking it as killed
(begin
(debug:print 0 *default-log-port* "test " test-name "/" item-path " needs to be killed")
(set! flag 1)
(rmt:set-state-status-and-roll-up-items run-id test-name item-path "KILLREQ" "n/a" #f)))
(if (not (null? tal))
(loop (car tal) (cdr tal) (+ kill-cnt flag))
(+ kill-cnt flag))))))
;; DO NOT USE - caching of configs is handled in launch:setup now.
;;
(define (launch:cache-config)
;; if we have a linktree and -runtests and -target and the directory exists dump the config
;; to megatest-(current-seconds).cfg and symlink it to megatest.cfg
(if (and *configdat*
(or (args:get-arg "-run")
(args:get-arg "-runtests")
(args:get-arg "-execute")))
(let* ((linktree (common:get-linktree)) ;; (get-environment-variable "MT_LINKTREE"))
(target (common:args-get-target exit-if-bad: #t))
(runname (or (args:get-arg "-runname")
(args:get-arg ":runname")
(getenv "MT_RUNNAME")))
(fulldir (conc linktree "/"
target "/"
runname)))
(if (and linktree (common:file-exists? linktree)) ;; can't proceed without linktree
(begin
(debug:print-info 0 *default-log-port* "Have -run with target=" target ", runname=" runname ", fulldir=" fulldir ", testpatt=" (or (args:get-arg "-testpatt") "%"))
(if (not (common:file-exists? fulldir))
(create-directory fulldir #t)) ;; need to protect with exception handler
(if (and target
runname
(common:file-exists? fulldir))
(let ((tmpfile (conc fulldir "/.megatest.cfg." (current-seconds)))
(targfile (conc fulldir "/.megatest.cfg-" megatest-version "-" megatest-fossil-hash))
(rconfig (conc fulldir "/.runconfig." megatest-version "-" megatest-fossil-hash)))
(if (common:file-exists? rconfig) ;; only cache megatest.config AFTER runconfigs has been cached
(begin
(debug:print-info 0 *default-log-port* "Caching megatest.config in " tmpfile)
(if (not (common:in-running-test?))
(configf:write-alist *configdat* tmpfile))
(system (conc "ln -sf " tmpfile " " targfile))))
)))
(debug:print-info 1 *default-log-port* "No linktree yet, no caching configs.")))))
;; gather available information, if legit read configs in this order:
;;
;; if have cache;
;; read it a return it
;; else
;; megatest.config (do not cache)
;; runconfigs.config (cache if all vars avail)
;; megatest.config (cache if all vars avail)
;; returns:
;; *toppath*
;; side effects:
;; sets; *configdat* (megatest.config info)
;; *runconfigdat* (runconfigs.config info)
;; *configstatus* (status of the read data)
;;
(define (launch:setup #!key (force-reread #f) (areapath #f))
(mutex-lock! *launch-setup-mutex*)
;; this stops the train quickly for new processes
(if (and *toppath*
(file-exists? (conc *toppath*"/stop-the-train")))
(begin
(debug:print 0 *default-log-port* "ERROR: found file "*toppath*"/stop-the-train, exiting immediately")
(exit 1)))
(if (and *toppath*
(eq? *configstatus* 'fulldata) (not force-reread)) ;; got it all
(begin
(debug:print 2 *default-log-port* "NOTE: skipping launch:setup-body call since we have fulldata")
(mutex-unlock! *launch-setup-mutex*)
*toppath*)
(let ((res (launch:setup-body force-reread: force-reread areapath: areapath)))
(mutex-unlock! *launch-setup-mutex*)
res)))
;; return paths depending on what info is available.
;;
(define (launch:get-cache-file-paths areapath toppath target mtconfig)
(let* ((use-cache (common:use-cache?))
(runname (common:args-get-runname))
(linktree (common:get-linktree))
(testname (common:get-full-test-name))
(rundir (if (and runname target linktree)
(common:directory-writable? (conc linktree "/" target "/" runname))
#f))
(testdir (if (and rundir testname)
(common:directory-writable? (conc rundir "/" testname))
#f))
(cachedir (or testdir rundir))
(mtcachef (and cachedir (conc cachedir "/" ".megatest.cfg-" megatest-version "-" megatest-fossil-hash)))
(rccachef (and cachedir (conc cachedir "/" ".runconfigs.cfg-" megatest-version "-" megatest-fossil-hash))))
(debug:print-info 6 *default-log-port*
"runname=" runname
"\n linktree=" linktree
"\n testname=" testname
"\n rundir=" rundir
"\n testdir=" testdir
"\n cachedir=" cachedir
"\n mtcachef=" mtcachef
"\n rccachef=" rccachef)
(cons mtcachef rccachef)))
(define (launch:setup-body #!key (force-reread #f) (areapath #f))
(if (and (eq? *configstatus* 'fulldata)
*toppath*
(not force-reread)) ;; no need to reprocess
*toppath* ;; return toppath
(let* ((use-cache (common:use-cache?)) ;; BB- use-cache checks *configdat* for use-cache setting. We do not have *configdat*. Bootstrapping problem here.
(toppath (common:get-toppath areapath))
(target (common:args-get-target))
(sections (if target (list "default" target) #f)) ;; for runconfigs
(mtconfig (or (args:get-arg "-config") "megatest.config")) ;; allow overriding megatest.config
(cachefiles (launch:get-cache-file-paths areapath toppath target mtconfig))
;; checking for null cachefiles should not be necessary, I was seeing error car of '(), might be a chicken bug or a red herring ...
(mtcachef (if (null? cachefiles)
#f
(car cachefiles))) ;; (and cachedir (conc cachedir "/" ".megatest.cfg-" megatest-version "-" megatest-fossil-hash)))
(rccachef (if (null? cachefiles)
#f
(cdr cachefiles)))) ;; (and cachedir (conc cachedir "/" ".runconfigs.cfg-" megatest-version "-" megatest-fossil-hash)))
;; (cancreate (and cachedir (common:file-exists? cachedir)(file-write-access? cachedir) (not (common:in-running-test?)))))
(set! *toppath* toppath) ;; This is needed when we are running as a test using CMDINFO as a datasource
;;(BB> "launch:setup-body -- cachefiles="cachefiles)
(cond
;; if mtcachef exists just read it, however we need to assume toppath is available in $MT_RUN_AREA_HOME
((and (not force-reread)
mtcachef rccachef
use-cache
(get-environment-variable "MT_RUN_AREA_HOME")
(common:file-exists? mtcachef)
(common:file-exists? rccachef))
;;(BB> "launch:setup-body -- cond branch 1 - use-cache")
(set! *configdat* (configf:read-alist mtcachef))
;;(BB> "launch:setup-body -- 1 set! *configdat*="*configdat*)
(set! *runconfigdat* (configf:read-alist rccachef))
(set! *configinfo* (list *configdat* (get-environment-variable "MT_RUN_AREA_HOME")))
(set! *configstatus* 'fulldata)
(set! *toppath* (get-environment-variable "MT_RUN_AREA_HOME"))
*toppath*)
;; there are no existing cached configs, do full reads of the configs and cache them
;; we have all the info needed to fully process runconfigs and megatest.config
((and ;; (not force-reread) ;; force-reread is irrelevant in the AND, could however OR it?
mtcachef
rccachef) ;; BB- why are we doing this without asking if caching is desired?
;;(BB> "launch:setup-body -- cond branch 2")
(let* ((first-pass (find-and-read-config ;; NB// sets MT_RUN_AREA_HOME as side effect
mtconfig
environ-patt: "env-override"
given-toppath: toppath
pathenvvar: "MT_RUN_AREA_HOME"))
(first-rundat (let ((toppath (if toppath
toppath
(car first-pass))))
(read-config ;; (conc toppath "/runconfigs.config") ;; this should be converted to runconfig:read but it is non-trivial, leaving it for now.
(conc (if (string? toppath)
toppath
(get-environment-variable "MT_RUN_AREA_HOME"))
"/runconfigs.config")
*runconfigdat* #t
sections: sections))))
(set! *runconfigdat* first-rundat)
(if first-pass ;;
(begin
;;(BB> "launch:setup-body -- \"first-pass\"=first-pass")
(set! *configdat* (car first-pass))
;;(BB> "launch:setup-body -- 2 set! *configdat*="*configdat*)
(set! *configinfo* first-pass)
(set! *toppath* (or toppath (cadr first-pass))) ;; use the gathered data unless already have it
(set! toppath *toppath*)
(if (not *toppath*)
(begin
(debug:print-error 0 *default-log-port* "you are not in a megatest area!")
(exit 1)))
(setenv "MT_RUN_AREA_HOME" *toppath*)
;; the seed read is done, now read runconfigs, cache it then read megatest.config one more time and cache it
(let* ((keys (common:list-or-null (rmt:get-keys)
message: "Failed to retrieve keys in launch.scm. Please report this to the developers."))
(key-vals (keys:target->keyval keys target))
(linktree (common:get-linktree)) ;; (or (getenv "MT_LINKTREE")(if *configdat* (configf:lookup *configdat* "setup" "linktree") #f)))
; (if *configdat*
; (configf:lookup *configdat* "setup" "linktree")
; (conc *toppath* "/lt"))))
(second-pass (find-and-read-config
mtconfig
environ-patt: "env-override"
given-toppath: toppath
pathenvvar: "MT_RUN_AREA_HOME"))
(runconfigdat (begin ;; this read of the runconfigs will see any adjustments made by re-reading megatest.config
(for-each (lambda (kt)
(setenv (car kt) (cadr kt)))
key-vals)
(read-config (conc toppath "/runconfigs.config") *runconfigdat* #t ;; consider using runconfig:read some day ...
sections: sections)))
(cachefiles (launch:get-cache-file-paths areapath toppath target mtconfig))
(mtcachef (car cachefiles))
(rccachef (cdr cachefiles)))
;; trap exception due to stale NFS handle -- Error: (open-output-file) cannot open file - Stale NFS file handle: "/p/fdk/gwa/lefkowit/mtTesting/qa/primbeqa/links/p1222/11/PDK_r1.1.1/prim/clean/pcell_testgen/.runconfigs.cfg-1.6427-7d1e789cb3f62f9cde719a4865bb51b3c17ea853" - ticket 220546342
;; TODO - consider 1) using simple-lock to bracket cache write
;; 2) cache in hash on server, since need to do rmt: anyway to lock.
(if rccachef
(common:fail-safe
(lambda ()
(configf:write-alist runconfigdat rccachef))
(conc "Could not write cache file - "rccachef)))
(if mtcachef
(common:fail-safe
(lambda ()
(configf:write-alist *configdat* mtcachef))
(conc "Could not write cache file - "mtcachef)))
(set! *runconfigdat* runconfigdat)
(if (and rccachef mtcachef) (set! *configstatus* 'fulldata))))
;; no configs found? should not happen but let's try to recover gracefully, return an empty hash-table
(set! *configdat* (make-hash-table))
)))
;; else read what you can and set the flag accordingly
;; here we don't have either mtconfig or rccachef
(else
;;(BB> "launch:setup-body -- cond branch 3 - else")
(let* ((cfgdat (find-and-read-config
(or (args:get-arg "-config") "megatest.config")
environ-patt: "env-override"
given-toppath: (get-environment-variable "MT_RUN_AREA_HOME")
pathenvvar: "MT_RUN_AREA_HOME")))
(if (and cfgdat (list? cfgdat) (> (length cfgdat) 0) (hash-table? (car cfgdat)))
(let* ((toppath (or (get-environment-variable "MT_RUN_AREA_HOME")(cadr cfgdat)))
(rdat (read-config (conc toppath ;; convert this to use runconfig:read!
"/runconfigs.config") *runconfigdat* #t sections: sections)))
(set! *configinfo* cfgdat)
(set! *configdat* (car cfgdat))
(set! *runconfigdat* rdat)
(set! *toppath* toppath)
(set! *configstatus* 'partial))
(begin
(debug:print-error 0 *default-log-port* "No " mtconfig " file found. Giving up.")
(exit 2))))))
;; COND ends here.
;; additional house keeping
(let* ((linktree (or (common:get-linktree)
(conc *toppath* "/lt"))))
(if linktree
(begin
(if (not (common:file-exists? linktree))
(begin
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* "Something went wrong when trying to create linktree dir at " linktree)
(debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn) ", exn=" exn)
(exit 1))
(create-directory linktree #t))))
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* "Something went wrong when trying to create link to linktree at " *toppath*)
(debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn) ", exn=" exn))
(let ((tlink (conc *toppath* "/lt")))
(if (not (common:file-exists? tlink))
(create-symbolic-link linktree tlink)))))
(begin
(debug:print-error 0 *default-log-port* "linktree not defined in [setup] section of megatest.config")
)))
(if (and *toppath*
(directory-exists? *toppath*))
(begin
(setenv "MT_RUN_AREA_HOME" *toppath*)
(setenv "MT_TESTSUITENAME" (common:get-testsuite-name)))
(begin
(debug:print-error 0 *default-log-port* "failed to find the top path to your Megatest area.")
(set! *toppath* #f) ;; force it to be false so we return #f
#f))
;; needed by various transport and db modules
(dbfile:testsuite-name (common:get-testsuite-name)) ;; (get-testsuite-name *toppath* *configdat*))
;; one more attempt to cache the configs for future reading
(let* ((cachefiles (launch:get-cache-file-paths areapath toppath target mtconfig))
(mtcachef (car cachefiles))
(rccachef (cdr cachefiles)))
;; trap exception due to stale NFS handle -- Error: (open-output-file) cannot open file - Stale NFS file handle: "...somepath.../.runconfigs.cfg-1.6427-7d1e789cb3f62f9cde719a4865bb51b3c17ea853" - ticket 220546342
;; TODO - consider 1) using simple-lock to bracket cache write
;; 2) cache in hash on server, since need to do rmt: anyway to lock.
(if (and rccachef *runconfigdat* (not (common:file-exists? rccachef)))
(common:fail-safe
(lambda ()
(configf:write-alist *runconfigdat* rccachef))
(conc "Could not write cache file - "rccachef))
)
(if (and mtcachef *configdat* (not (common:file-exists? mtcachef)))
(common:fail-safe
(lambda ()
(configf:write-alist *configdat* mtcachef))
(conc "Could not write cache file - "mtcachef))
)
(if (and rccachef mtcachef *runconfigdat* *configdat*)
(set! *configstatus* 'fulldata)))
;; if have -append-config then read and append here
(let ((cfname (args:get-arg "-append-config")))
(if (and cfname
(file-read-access? cfname))
(read-config cfname *configdat* #t))) ;; values are added to the hash, no need to do anything special.
;; have config at this time, this is a good place to set params based on config file settings
(let* ((dbmode (configf:lookup *configdat* "setup" "dbcache-mode"))
(syncmode (configf:lookup *configdat* "setup" "sync-mode"))
(srvdebug (configf:lookup *configdat* "server" "debug-parameter")))
(if dbmode
(begin
(debug:print-info 0 *default-log-port* "Overriding dbmode to "dbmode)
(dbcache-mode (string->symbol dbmode))))
(if syncmode
(begin
(debug:print-info 0 *default-log-port* "Overriding syncmode to "syncmode)
(dbfile:sync-method (string->symbol syncmode))))
(if srvdebug
(begin
(debug:print-info 0 *default-log-port* "Overriding server debug parameter to "srvdebug)
(tt-server-profile-string srvdebug)))
)
*toppath*)))
(define (get-best-disk confdat testconfig)
(let* ((disks (or (and testconfig (hash-table-ref/default testconfig "disks" #f))
(hash-table-ref/default confdat "disks" #f)))
(minspace (let ((m (configf:lookup confdat "setup" "minspace")))
(string->number (or m "10000")))))
(if disks
(let ((res (common:get-disk-with-most-free-space disks minspace)))
(if res
(cdr res)
;; else if no valid disks...
(begin
(debug:print 0 *default-log-port* "WARNING: No valid disks or no disk with enough space found from " disks)
(if (null? disks)
(cons 1 (conc *toppath* "/runs"))
;; else try to create the directories anyway.
(let ((paths (sort disks (lambda (x y) (> (string-length (cadr x)) (string-length (cadr y)))))))
(let loop ((head (car paths)) (tail (cdr paths)))
(let ((result (handle-exceptions exn
(begin
(debug:print 0 *default-log-port* "failed to create dir " (cadr head) ", exn=" exn)
#f)
(create-directory (cadr head) #t))))
(if result
result
(if (null? tail)
(begin
(debug:print 0 *default-log-port* "Using toppath/runs")
(conc *toppath* "/runs")
)
(loop (car tail) (cdr tail))))))
)
) ;; if null? disks
) ;; if not res
)
)
;; no disks definition - use toppath/runs, fall back to currdir/runs
(let* ((toppath (or *toppath*
(common:get-toppath *toppath*)
(begin
(debug:print-error 0 *default-log-port* "Creating runs dir in current directory, this is probably not what you wanted. Please check your setup.")
(current-directory))))
(runsdir (conc toppath "/runs")))
(if (not (file-exists? runsdir))(create-directory runsdir))
runsdir)
))) ;; the code creates the necessary directories if it does not exist and returns the path.
(define (launch:test-copy test-src-path test-path)
(let* ((ovrcmd (let ((cmd (configf:lookup *configdat* "setup" "testcopycmd")))
(if cmd
;; substitute the TEST_SRC_PATH and TEST_TARG_PATH
(string-substitute "TEST_TARG_PATH" test-path
(string-substitute "TEST_SRC_PATH" test-src-path cmd #t) #t)
#f)))
(cmd (if ovrcmd
ovrcmd
(conc "rsync -av" (if (debug:debug-mode 1) "" "q") " " test-src-path "/ " test-path "/"
" >> " test-path "/mt_launch.log 2>> " test-path "/mt_launch.log")))
(status (system cmd)))
(if (not (eq? status 0))
(debug:print 2 *default-log-port* "ERROR: problem with running \"" cmd "\""))))
;; Desired directory structure:
;;
;; <linkdir> - <target> - <testname> -.
;; |
;; v
;; <rundir> - <target> - <testname> -|- <itempath(s)>
;;
;; dir stored in test is:
;;
;; <linkdir> - <target> - <testname> [ - <itempath> ]
;;
;; All log file links should be stored relative to the top of link path
;;
;; <target> - <testname> [ - <itempath> ]
;;
(define (create-work-area run-id run-info keyvals test-id test-src-path disk-path testname itemdat #!key (remtries 2))
(let* ((item-path (if (string? itemdat) itemdat (item-list->path itemdat))) ;; if pass in string - just use it
(runname (if (string? run-info) ;; if we pass in a string as run-info use it as run-name.
run-info
(db:get-value-by-header (db:get-rows run-info)
(db:get-header run-info)
"runname")))
(contour #f) ;; NOT READY FOR THIS (args:get-arg "-contour"))
;; convert back to db: from rdb: - this is always run at server end
(target (string-intersperse (map cadr keyvals) "/"))
(not-iterated (equal? "" item-path))
;; all tests are found at <rundir>/test-base or <linkdir>/test-base
(testtop-base (conc target "/" runname "/" testname))
(test-base (conc testtop-base (if not-iterated "" "/") item-path))
;; nb// if itempath is not "" then it is prefixed with "/"
(toptest-path (conc disk-path (if contour (conc "/" contour) "") "/" testtop-base))
(test-path (conc disk-path (if contour (conc "/" contour) "") "/" test-base))
;; ensure this exists first as links to subtests must be created there
(linktree (common:get-linktree))
;; WAS: (let ((rd (configf:lookup *configdat* "setup" "linktree")))
;; (if rd rd (conc *toppath* "/runs"))))
;; which seems wrong ...
(lnkbase (conc linktree (if contour (conc "/" contour) "") "/" target "/" runname))
(lnkpath (conc lnkbase "/" testname))
(lnkpathf (conc lnkpath (if not-iterated "" "/") item-path))
(lnktarget (conc lnkpath "/" item-path)))
;; Update the rundir path in the test record for all, rundir=physical, shortdir=logical
;; rundir shortdir
(rmt:general-call 'test-set-rundir-shortdir run-id lnkpathf test-path testname item-path run-id)
(debug:print 2 *default-log-port* "INFO:\n lnkbase=" lnkbase "\n lnkpath=" lnkpath "\n toptest-path=" toptest-path "\n test-path=" test-path)
(if (not (common:file-exists? linktree))
(begin
(debug:print 0 *default-log-port* "WARNING: linktree did not exist! Creating it now at " linktree)
(create-directory linktree #t))) ;; (system (conc "mkdir -p " linktree))))
;; create the directory for the tests dir links, this is needed no matter what... try up to three times
(let loop ((done 3))
(let ((success (if (and (not (common:directory-exists? lnkbase))
(not (common:file-exists? lnkbase)))
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* "Problem creating linktree base at " lnkbase ", exn=" exn)
(print-error-message exn (current-error-port))
#t)
(create-directory lnkbase #t)
#f))))
(if (and (not success)(> done 0))
(loop (- done 1)))))
;; update the toptest record with its location rundir, cache the path
;; This wass highly inefficient, one db write for every subtest, potentially
;; thousands of unnecessary updates, cache the fact it was set and don't set it
;; again.
;; Now create the link from the test path to the link tree, however
;; if the test is iterated it is necessary to create the parent path
;; to the iteration. use pathname-directory to trim the path by one
;; level
(if (not not-iterated) ;; i.e. iterated
(let ((iterated-parent (pathname-directory (conc lnkpath "/" item-path))))
(debug:print-info 2 *default-log-port* "Creating iterated parent " iterated-parent)
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* " Failed to create directory " iterated-parent ((condition-property-accessor 'exn 'message) exn)
", continuing but link tree may be corrupted, exn=" exn)
#;(exit 1))
(create-directory iterated-parent #t))))
(if (symbolic-link? lnkpath)
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* " Failed to remove symlink " lnkpath ((condition-property-accessor 'exn 'message) exn)
", continuing but link tree may be corrupted. exn=" exn)
#;(exit 1))
(delete-file lnkpath)))
(if (not (or (common:file-exists? lnkpath)
(symbolic-link? lnkpath)))
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* " Failed to create symlink " lnkpath ((condition-property-accessor 'exn 'message) exn)
", continuing but link tree may be corrupted. exn=" exn)
#;(exit 1))
(create-symbolic-link toptest-path lnkpath)))
;; NB - This was not working right - some top tests are not getting the path set!!!
;;
;; Do the setting of this record after the paths are created so that the shortdir can
;; be set to the real directory location. This is safer for future clean up if the link
;; tree is damaged or lost.
;;
(if (not (hash-table-ref/default *toptest-paths* testname #f))
(let* ((testinfo (rmt:get-test-info-by-id run-id test-id)) ;; run-id testname item-path))
(curr-test-path (if testinfo ;; (filedb:get-path *fdb*
;; (db:get-path dbstruct
;; (rmt:sdb-qry 'getstr
(db:test-get-rundir testinfo) ;; ) ;; )
#f)))
(hash-table-set! *toptest-paths* testname curr-test-path)
;; NB// Was this for the test or for the parent in an iterated test?
(rmt:general-call 'test-set-rundir-shortdir run-id lnkpath
(if (common:file-exists? lnkpath)
;; (resolve-pathname lnkpath)
(common:nice-path lnkpath)
lnkpath)
testname "" run-id)
;; (rmt:general-call 'test-set-rundir run-id lnkpath testname "") ;; toptest-path)
(if (or (not curr-test-path)
(not (directory-exists? toptest-path)))
(begin
(debug:print-info 2 *default-log-port* "Creating " toptest-path " and link " lnkpath)
(handle-exceptions
exn
(if (directory-exists? toptest-path) ;; it was likely created in parallel
#t
(begin
(debug:print-info 0 *default-log-port* "failed to create directory " toptest-path ", exn=" exn)
#f))
(create-directory toptest-path #t))
(hash-table-set! *toptest-paths* testname toptest-path)))))
;; The toptest path has been created, the link to the test in the linktree has
;; been created. Now, if this is an iterated test the real test dir must be created
(if (not not-iterated) ;; this is an iterated test
(begin ;; (let ((lnktarget (conc lnkpath "/" item-path)))
(debug:print 2 *default-log-port* "Setting up sub test run area")
(debug:print 2 *default-log-port* " - creating run area in " test-path)
(handle-exceptions
exn
(if (directory-exists? test-path)
#t
(begin
(debug:print-error 0 *default-log-port* " Failed to create directory " test-path ((condition-property-accessor 'exn 'message) exn)
", exiting, exn=" exn)
(exit 1)))
(create-directory test-path #t))
(debug:print 2 *default-log-port*
" - creating link from: " test-path "\n"
" to: " lnktarget)
;; If there is already a symlink delete it and recreate it.
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* " Failed to re-create link " lnktarget ((condition-property-accessor 'exn 'message) exn) ", exiting, exn=" exn)
(exit))
(if (symbolic-link? lnktarget) (delete-file lnktarget))
(if (not (common:file-exists? lnktarget)) (create-symbolic-link test-path lnktarget)))))
(if (not (directory? test-path))
(create-directory test-path #t)) ;; this is a hack, I don't know why out of the blue this path does not exist sometimes
(if (and test-src-path (directory? test-path))
(begin
(launch:test-copy test-src-path test-path)
(list lnkpathf lnkpath ))
(if (and test-src-path (> remtries 0))
(begin
(debug:print-error 0 *default-log-port* "Failed to create work area at " test-path " with link at " lnktarget ", remaining attempts " remtries)
;;
(create-work-area run-id run-info keyvals test-id test-src-path disk-path testname itemdat remtries: (- remtries 1)))
(list #f #f)))))
(define (launch:handle-zombie-tests run-id)
(let* ((key (conc "zombiescan-runid-"run-id))
(now (current-seconds))
(threshold (- (current-seconds) (* 2 (or (configf:lookup-number *configdat* "setup" "deadtime") 120))))
(val (rmt:get-var key))
(do-scan?
(cond
((not val)
#t)
((< val threshold)
#t)
(else #f))))
(when do-scan?
(debug:print 1 *default-log-port* "INFO: search and mark zombie tests")
(rmt:set-var key (current-seconds))
(rmt:find-and-mark-incomplete run-id #f))))
;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area
;; 4. remotely run the test on allocated host
;; - could be ssh to host from hosts table (update regularly with load)
;; - could be netbatch
;; (launch-test db (cadr status) test-conf))
(define (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat params)
(assert runname "FATAL: launch-test called with no runname")
(mutex-lock! *launch-setup-mutex*) ;; setting variables and processing the testconfig is NOT thread-safe, reuse the launch-setup mutex
(let* ( ;; (lock-key (conc "test-" test-id))
;; (got-lock (let loop ((lock (rmt:no-sync-get-lock lock-key))
;; (expire-time (+ (current-seconds) 15))) ;; give up on getting the lock and steal it after 15 seconds
;; (if (car lock)
;; #t
;; (if (> (current-seconds) expire-time)
;; (begin
;; (debug:print-info 0 *default-log-port* "Timed out waiting for a lock to launch test " keyvals " " runname " " test-name " " test-path)
;; (rmt:no-sync-del! lock-key) ;; destroy the lock
;; (loop (rmt:no-sync-get-lock lock-key) expire-time)) ;;
;; (begin
;; (thread-sleep! 1)
;; (loop (rmt:no-sync-get-lock lock-key) expire-time))))))
(item-path (item-list->path itemdat))
(contour #f)) ;; NOT READY FOR THIS (args:get-arg "-contour")))
(let loop ((delta (- (current-seconds) *last-launch*))
(launch-delay (configf:lookup-number *configdat* "setup" "launch-delay" default: 0)))
(if (> launch-delay delta)
(begin
;; (if (common:low-noise-print 1200 "test launch delay") ;; every two hours or so remind the user about launch delay.
;; (debug:print-info 0 *default-log-port* "NOTE: test launches are delayed by " launch-delay " seconds. See megatest.config launch-delay setting to adjust.")) ;; launch of " test-name " for " (- launch-delay delta) " seconds"))
(thread-sleep! (- launch-delay delta))
(loop (- (current-seconds) *last-launch*) launch-delay))))
(change-directory *toppath*)
(alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute", *maybe* - the longer they are set the longer each launch takes (must be non-overlapping with the vars)
(append
(list
(list "MT_RUN_AREA_HOME" *toppath*)
(list "MT_TEST_NAME" test-name)
(list "MT_RUNNAME" runname)
(list "MT_ITEMPATH" item-path)
(list "MT_CONTOUR" contour)
)
itemdat))
(let* ((tregistry (tests:get-all)) ;; third param (below) is system-allowed
;; for tconfig, why do we allow fallback to test-conf?
(tconfig (or (tests:get-testconfig test-name item-path tregistry #t force-create: #t)
(begin
(debug:print 0 *default-log-port* "WARNING: falling back to pre-calculated testconfig. This is likely not desired.")
test-conf))) ;; force re-read now that all vars are set
(useshell (let ((ush (configf:lookup *configdat* "jobtools" "useshell")))
(if ush
(if (equal? ush "no") ;; must use "no" to NOT use shell
#f
ush)
#t))) ;; default is yes
(runscript (configf:lookup tconfig "setup" "runscript"))
(ezsteps (> (length (hash-table-ref/default tconfig "ezsteps" '())) 0)) ;; don't send all the steps, could be big, just send a flag
(subrun (> (length (hash-table-ref/default tconfig "subrun" '())) 0)) ;; send a flag to process a subrun
;; (diskspace (configf:lookup tconfig "requirements" "diskspace"))
;; (memory (configf:lookup tconfig "requirements" "memory"))
;; (hosts (configf:lookup *configdat* "jobtools" "workhosts")) ;; I'm pretty sure this was never completed
(remote-megatest (configf:lookup *configdat* "setup" "executable"))
(run-time-limit (or (configf:lookup tconfig "requirements" "runtimelim")
(configf:lookup *configdat* "setup" "runtimelim")))
;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to
;; allow running from dashboard. Extract the path
;; from the called megatest and convert dashboard
;; or dboard to megatest
(local-megatest (common:find-local-megatest))
#;(local-megatest (let* ((lm (car (argv)))
(dir (pathname-directory lm))
(exe (pathname-strip-directory lm)))
(conc (if dir (conc dir "/") "")
(case (string->symbol exe)
((dboard) "../megatest")
((mtest) "../megatest")
((dashboard) "megatest")
(else exe)))))
(launcher (common:get-launcher *configdat* test-name item-path)) ;; (configf:lookup *configdat* "jobtools" "launcher"))
(test-sig (conc (common:get-testsuite-name) ":" test-name ":" item-path)) ;; (item-list->path itemdat))) ;; test-path is the full path including the item-path
(work-area #f)
(toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all
(diskpath #f)
(cmdparms #f)
(fullcmd #f) ;; (define a (with-output-to-string (lambda ()(write x))))
(mt-bindir-path #f)
(testinfo (rmt:get-test-info-by-id run-id test-id))
(mt_target (string-intersperse (map cadr keyvals) "/"))
(debug-param (append (if (args:get-arg "-debug") (list "-debug" (args:get-arg "-debug")) '())
(if (args:get-arg "-logging")(list "-logging") '())
(if (configf:lookup *configdat* "misc" "profilesw")
(list (configf:lookup *configdat* "misc" "profilesw"))
'()))))
;; (if hosts (set! hosts (string-split hosts)))
;; set the megatest to be called on the remote host
(if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
(set! mt-bindir-path (pathname-directory remote-megatest))
(if launcher (set! launcher (string-split launcher)))
;; set up the run work area for this test
(if (and (args:get-arg "-preclean") ;; user has requested to preclean for this run
(not (member (db:test-get-rundir testinfo)(list "n/a" "/tmp/badname")))) ;; n/a is a placeholder and thus not a read dir
(begin
(debug:print-info 0 *default-log-port* "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path)
(runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record
;; prevent overlapping actions - set to LAUNCHED as early as possible
;;
;; the following call handles waiver propogation. cannot yet condense into roll-up-pass-fail
(tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
(rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "LAUNCHED" #f)
;; (pp (hash-table->alist tconfig))
(set! diskpath (get-best-disk *configdat* tconfig))
(debug:print 2 *default-log-port* "best disk path = " diskpath)
(if diskpath
(let ((dat (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
(set! work-area (car dat))
(set! toptest-work-area (cadr dat))
(debug:print-info 2 *default-log-port* "Using work area " work-area))
(begin
(set! work-area (conc test-path "/tmp_run"))
(create-directory work-area #t)
(debug:print 0 *default-log-port* "WARNING: No disk work area specified - running in the test directory under tmp_run")))
(set! cmdparms (base64:base64-encode
(z3:encode-buffer
(with-output-to-string
(lambda () ;; (list 'hosts hosts)
(write (list (list 'testpath test-path)
;; (list 'transport (conc *transport-type*))
;; (list 'serverinf *server-info*)
#;(list 'homehost (let* ((hhdat (server:get-homehost)))
(if hhdat
(car hhdat)
#f)))
#;(list 'serverurl (if *runremote* ;; would like to add this back ... WORK NEEDED
(remote-server-url *runremote*)
#f)) ;;
(list 'areaname (common:get-testsuite-name))
(list 'toppath *toppath*)
(list 'work-area work-area)
(list 'test-name test-name)
(list 'runscript runscript)
(list 'run-id run-id )
(list 'test-id test-id )
;; (list 'item-path item-path )
(list 'itemdat itemdat )
(list 'megatest remote-megatest)
(list 'ezsteps ezsteps)
(list 'subrun subrun)
(list 'target mt_target)
(list 'contour contour)
(list 'runtlim (if run-time-limit (common:hms-string->seconds run-time-limit) #f))
(list 'env-ovrd (hash-table-ref/default *configdat* "env-override" '()))
(list 'set-vars (if params (hash-table-ref/default params "-setvars" #f)))
(list 'runname runname)
(list 'mt-bindir-path mt-bindir-path))))))))
(setenv "MT_CMDINFO" cmdparms) ;; setting this for use in nblauncher
;; clean out step records from previous run if they exist
;; (rmt:delete-test-step-records run-id test-id)
;; if the dir does not exist we may have a itempath where individual variables are a path, launch anyway
(if (common:file-exists? work-area)
(change-directory work-area)) ;; so that log files from the launch process don't clutter the test dir
(cond
;; ((and launcher hosts) ;; must be using ssh hostname
;; (set! fullcmd (append launcher (car hosts)(list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
(launcher
(set! fullcmd (append launcher (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
;; (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms))))
(else
(if (not useshell)(debug:print 0 *default-log-port* "WARNING: internal launching will not work well without \"useshell yes\" in your [jobtools] section"))
(set! fullcmd (append (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param (list (if useshell "&" ""))))))
;; (set! fullcmd (list remote-megatest test-sig "-execute" cmdparms (if useshell "&" "")))))
(if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm"))))
(debug:print 1 *default-log-port* "Launching " work-area)
;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done
(debug:print 4 *default-log-port* "fullcmd: " fullcmd)
(set! *last-launch* (current-seconds)) ;; all that junk above takes time, set this as late as possible.
(let* ((commonprevvals (alist->env-vars
(hash-table-ref/default *configdat* "env-override" '())))
(miscprevvals (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
(append (list (list "MT_TEST_RUN_DIR" work-area)
(list "MT_TEST_NAME" test-name)
(list "MT_ITEM_INFO" (conc itemdat))
(list "MT_RUNNAME" runname)
(list "MT_TARGET" mt_target)
(list "MT_ITEMPATH" item-path)
)
itemdat)))
(testprevvals (alist->env-vars
(hash-table-ref/default tconfig "pre-launch-env-overrides" '())))
;; Launchwait defaults to true, must override it to turn off wait
(launchwait (if (equal? (configf:lookup *configdat* "setup" "launchwait") "no") #f #t))
(launch-results-prev (apply (if launchwait ;; BB: TODO: refactor this to examine return code of launcher, if nonzero, set state to launch failed.
process:cmd-run-with-stderr-and-exitcode->list
process-run)
(if useshell
(let ((cmdstr (string-intersperse fullcmd " ")))
(if launchwait
cmdstr
(conc cmdstr " >> mt_launch.log 2>&1 &")))
(car fullcmd))
(if useshell
'()
(cdr fullcmd))))
(success (if launchwait (equal? 0 (cadr launch-results-prev)) #t))
(launch-results (if launchwait (car launch-results-prev) launch-results-prev)))
(if (not success)
(tests:test-set-status! run-id test-id "COMPLETED" "DEAD" "launcher failed; exited non-zero; check mt_launch.log" #f)) ;; (if launch-results launch-results "FAILED"))
(mutex-unlock! *launch-setup-mutex*) ;; yes, really should mutex all the way to here. Need to put this entire process into a fork.
;; (rmt:no-sync-del! lock-key) ;; release the lock for starting this test
(if (not launchwait) ;; give the OS a little time to allow the process to start
(thread-sleep! 0.01))
(with-output-to-file "mt_launch.log"
(lambda ()
(print "LAUNCHCMD: " (string-intersperse fullcmd " "))
(if (list? launch-results)
(apply print launch-results)
(print "NOTE: launched \"" fullcmd "\"\n but did not wait for it to proceed. Add the following to megatest.config \n[setup]\nlaunchwait yes\n if you have problems with this"))
#:append))
(debug:print 2 *default-log-port* "Launching completed, updating db")
(debug:print 2 *default-log-port* "Launch results: " launch-results)
(if (not launch-results)
(begin
(debug:print 0 *default-log-port* "ERROR: Failed to run " (string-intersperse fullcmd " ") ", exiting now")
;; (sqlite3:finalize! db)
;; good ole "exit" seems not to work
;; (_exit 9)
;; but this hack will work! Thanks go to Alan Post of the Chicken email list
;; NB// Is this still needed? Should be safe to go back to "exit" now?
(process-signal (current-process-id) signal/kill)
))
(alist->env-vars miscprevvals)
(alist->env-vars testprevvals)
(alist->env-vars commonprevvals)
launch-results))
(change-directory *toppath*)
(thread-sleep! (configf:lookup-number *configdat* "setup" "inter-test-delay" default: 0.0))))
;; recover a test where the top controlling mtest may have died
;;
(define (launch:recover-test run-id test-id)
;; this function is called on the test run host via ssh
;;
;; 1. look at the process from pid
;; - is it owned by calling user
;; - it it's run directory correct for the test
;; - is there a controlling mtest (maybe stuck)
;; 2. if recovery is needed watch pid
;; - when it exits take the exit code and do the needful
;;
(let* ((pid (rmt:test-get-top-process-pid run-id test-id))
(psres (with-input-from-pipe
(conc "ps -F -u " (current-user-name) " | grep -E '" pid " ' | grep -v 'grep -E " pid "'")
(lambda ()
(read-line))))
(rundir (if (string? psres) ;; real process owned by user
(read-symbolic-link (conc "/proc/" pid "/cwd"))
#f)))
;; now wait on that process if all is correct
;; periodically update the db with runtime
;; when the process exits look at the db, if still RUNNING after 10 seconds set
;; state/status appropriately
(process-wait pid)))