;;======================================================================
;; Copyright 2006-2013, Matthew Welland.
;;
;; This program is made available under the GNU GPL version 2.0 or
;; greater. See the accompanying file COPYING for details.
;;
;; This program is distributed WITHOUT ANY WARRANTY; without even the
;; implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;; PURPOSE.
;;======================================================================
(use json format) ;; RADT => purpose of json format??
(declare (unit rmt))
(declare (uses api))
(declare (uses tdb))
(declare (uses http-transport))
;;(declare (uses nmsg-transport))
;;
;; THESE ARE ALL CALLED ON THE CLIENT SIDE!!!
;;
;; ;; For debugging add the following to ~/.megatestrc
;;
;; (require-library trace)
;; (import trace)
;; (trace
;; rmt:send-receive
;; api:execute-requests
;; )
;; generate entries for ~/.megatestrc with the following
;;
;; grep define ../rmt.scm | grep rmt: |perl -pi -e 's/\(define\s+\((\S+)\W.*$/\1/'|sort -u
;;======================================================================
;; S U P P O R T F U N C T I O N S
;;======================================================================
;;
(define (rmt:write-frequency-over-limit? cmd run-id)
(and (not (member cmd api:read-only-queries))
(let* ((tmprec (hash-table-ref/default *write-frequency* run-id #f))
(record (if tmprec tmprec
(let ((v (vector (current-seconds) 0)))
(hash-table-set! *write-frequency* run-id v)
v)))
(count (+ 1 (vector-ref record 1)))
(start (vector-ref record 0))
(queries-per-second (/ (* count 1.0)
(max (- (current-seconds) start) 1))))
(vector-set! record 1 count)
(if (and (> count 10)
(> queries-per-second 10))
(begin
(debug:print-info 1 *default-log-port* "db write rate too high, starting a server, count=" count " start=" start " run-id=" run-id " queries-per-second=" queries-per-second)
#t)
#f))))
;; if a server is either running or in the process of starting call client:setup
;; else return #f to let the calling proc know that there is no server available
;;
(define (rmt:get-connection-info run-id)
(let ((cinfo (hash-table-ref/default *runremote* run-id #f)))
(if cinfo
cinfo
;; NB// can cache the answer for server running for 10 seconds ...
;; ;; (and (not (rmt:write-frequency-over-limit? cmd run-id))
(if (tasks:server-running-or-starting? (db:delay-if-busy (tasks:open-db)) run-id)
(client:setup run-id)
#f))))
(define *send-receive-mutex* (make-mutex)) ;; should have separate mutex per run-id
;; RA => e.g. usage (rmt:send-receive 'get-var #f (list varname))
;;
(define (rmt:send-receive cmd rid params #!key (attemptnum 1)) ;; start attemptnum at 1 so the modulo below works as expected
;; clean out old connections
;; (mutex-lock! *db-multi-sync-mutex*)
(let ((expire-time (- (current-seconds) (server:get-timeout) 10))) ;; don't forget the 10 second margin
(for-each
(lambda (run-id)
(let ((connection (hash-table-ref/default *runremote* run-id #f)))
(if (and (vector? connection)
(< (http-transport:server-dat-get-last-access connection) expire-time))
(begin
(debug:print-info 0 *default-log-port* "Discarding connection to server for run-id " run-id ", too long between accesses")
;; bb- disabling nanomsg
;; SHOULD CLOSE THE CONNECTION HERE
;; (case *transport-type*
;; ((nmsg)(nn-close (http-transport:server-dat-get-socket
;; (hash-table-ref *runremote* run-id)))))
(hash-table-delete! *runremote* run-id)))))
(hash-table-keys *runremote*)))
;; (mutex-unlock! *db-multi-sync-mutex*)
;; (mutex-lock! *send-receive-mutex*)
(let* ((run-id (if rid rid 0))
(connection-info (rmt:get-connection-info run-id)))
;; the nmsg method does the encoding under the hood (the http method should be changed to do this also)
(if connection-info
;; use the server if have connection info
(let* ((dat (case *transport-type*
((http)(condition-case
(http-transport:client-api-send-receive run-id connection-info cmd params)
((commfail)(vector #f "communications fail"))
((exn)(vector #f "other fail"))))
;; ((nmsg)(condition-case
;; (nmsg-transport:client-api-send-receive run-id connection-info cmd params)
;; ((timeout)(vector #f "timeout talking to server"))))
(else (exit))))
(success (if (vector? dat) (vector-ref dat 0) #f))
(res (if (vector? dat) (vector-ref dat 1) #f)))
(if (vector? connection-info)(http-transport:server-dat-update-last-access connection-info))
(if success
(begin
;; (mutex-unlock! *send-receive-mutex*)
(case *transport-type*
((http) res) ;; (db:string->obj res))
;; ((nmsg) res)
)) ;; (vector-ref res 1)))
(begin ;; let ((new-connection-info (client:setup run-id)))
(debug:print 0 *default-log-port* "WARNING: Communication failed, trying call to rmt:send-receive again.")
;; (case *transport-type*
;; ((nmsg)(nn-close (http-transport:server-dat-get-socket connection-info))))
(hash-table-delete! *runremote* run-id) ;; don't keep using the same connection
;; NOTE: killing server causes this process to block forever. No idea why. Dec 2.
;; (if (eq? (modulo attemptnum 5) 0)
;; (tasks:kill-server-run-id run-id tag: "api-send-receive-failed"))
;; (mutex-unlock! *send-receive-mutex*) ;; close the mutex here to allow other threads access to communications
(tasks:start-and-wait-for-server (tasks:open-db) run-id 15)
;; (nmsg-transport:client-api-send-receive run-id connection-info cmd param remtries: (- remtries 1))))))
;; no longer killing the server in http-transport:client-api-send-receive
;; may kill it here but what are the criteria?
;; start with three calls then kill server
;; (if (eq? attemptnum 3)(tasks:kill-server-run-id run-id))
;; (thread-sleep! 2)
(rmt:send-receive cmd run-id params attemptnum: (+ attemptnum 1)))))
;; no connection info? try to start a server, or access locally if no
;; server and the query is read-only
;;
;; Note: The tasks db was checked for a server in starting mode in the rmt:get-connection-info call
;;
(if (and (< attemptnum 15)
(member cmd api:write-queries))
(let ((faststart (configf:lookup *configdat* "server" "faststart")))
(hash-table-delete! *runremote* run-id)
;; (mutex-unlock! *send-receive-mutex*)
(if (and faststart (equal? faststart "no"))
(begin
(tasks:start-and-wait-for-server (db:delay-if-busy (tasks:open-db)) run-id 10)
(thread-sleep! (random 5)) ;; give some time to settle and minimize collison?
(rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))
(let ((start-time (current-milliseconds))
(max-query (string->number (or (configf:lookup *configdat* "server" "server-query-threshold")
"300")))
(newres (rmt:open-qry-close-locally cmd run-id params)))
(let ((delta (- (current-milliseconds) start-time)))
(if (> delta max-query)
(begin
(debug:print-info 0 *default-log-port* "Starting server as query time " delta " is over the limit of " max-query)
(server:kind-run run-id)))
;; return the result!
newres)
)))
(begin
;; (debug:print-error 0 *default-log-port* "Communication failed!")
;; (mutex-unlock! *send-receive-mutex*)
;; (exit)
(rmt:open-qry-close-locally cmd run-id params)
)))))
(define (rmt:update-db-stats run-id rawcmd params duration)
(mutex-lock! *db-stats-mutex*)
(handle-exceptions
exn
(begin
(debug:print 0 *default-log-port* "WARNING: stats collection failed in update-db-stats")
(debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
(print "exn=" (condition->list exn))
#f) ;; if this fails we don't care, it is just stats
(let* ((cmd (conc "run-id=" run-id " " (if (eq? rawcmd 'general-call) (car params) rawcmd)))
(stat-vec (hash-table-ref/default *db-stats* cmd #f)))
(if (not (vector? stat-vec))
(let ((newvec (vector 0 0)))
(hash-table-set! *db-stats* cmd newvec)
(set! stat-vec newvec)))
(vector-set! stat-vec 0 (+ (vector-ref stat-vec 0) 1))
(vector-set! stat-vec 1 (+ (vector-ref stat-vec 1) duration))))
(mutex-unlock! *db-stats-mutex*))
(define (rmt:print-db-stats)
(let ((fmtstr "~40a~7-d~9-d~20,2-f")) ;; "~20,2-f"
(debug:print 18 *default-log-port* "DB Stats\n========")
(debug:print 18 *default-log-port* (format #f "~40a~8a~10a~10a" "Cmd" "Count" "TotTime" "Avg"))
(for-each (lambda (cmd)
(let ((cmd-dat (hash-table-ref *db-stats* cmd)))
(debug:print 18 *default-log-port* (format #f fmtstr cmd (vector-ref cmd-dat 0) (vector-ref cmd-dat 1) (/ (vector-ref cmd-dat 1)(vector-ref cmd-dat 0))))))
(sort (hash-table-keys *db-stats*)
(lambda (a b)
(> (vector-ref (hash-table-ref *db-stats* a) 0)
(vector-ref (hash-table-ref *db-stats* b) 0)))))))
(define (rmt:get-max-query-average run-id)
(mutex-lock! *db-stats-mutex*)
(let* ((runkey (conc "run-id=" run-id " "))
(cmds (filter (lambda (x)
(substring-index runkey x))
(hash-table-keys *db-stats*)))
(res (if (null? cmds)
(cons 'none 0)
(let loop ((cmd (car cmds))
(tal (cdr cmds))
(max-cmd (car cmds))
(res 0))
(let* ((cmd-dat (hash-table-ref *db-stats* cmd))
(tot (vector-ref cmd-dat 0))
(curravg (/ (vector-ref cmd-dat 1) (vector-ref cmd-dat 0))) ;; count is never zero by construction
(currmax (max res curravg))
(newmax-cmd (if (> curravg res) cmd max-cmd)))
(if (null? tal)
(if (> tot 10)
(cons newmax-cmd currmax)
(cons 'none 0))
(loop (car tal)(cdr tal) newmax-cmd currmax)))))))
(mutex-unlock! *db-stats-mutex*)
res))
(define (rmt:open-qry-close-locally cmd run-id params #!key (remretries 5))
(let* ((dbstruct-local (if *dbstruct-db*
*dbstruct-db*
(let* ((dbdir (db:dbfile-path #f)) ;; (conc (configf:lookup *configdat* "setup" "linktree") "/.db"))
(db (make-dbr:dbstruct path: dbdir local: #t)))
(set! *dbstruct-db* db)
db)))
(db-file-path (db:dbfile-path 0))
;; (read-only (not (file-read-access? db-file-path)))
(start (current-milliseconds))
(resdat (api:execute-requests dbstruct-local (vector (symbol->string cmd) params)))
(success (vector-ref resdat 0))
(res (vector-ref resdat 1))
(duration (- (current-milliseconds) start)))
(if (not success)
(if (> remretries 0)
(begin
(debug:print-error 0 *default-log-port* "local query failed. Trying again.")
(thread-sleep! (/ (random 5000) 1000)) ;; some random delay
(rmt:open-qry-close-locally cmd run-id params remretries: (- remretries 1)))
(begin
(debug:print-error 0 *default-log-port* "too many retries in rmt:open-qry-close-locally, giving up")
#f))
(begin
;; (rmt:update-db-stats run-id cmd params duration)
;; mark this run as dirty if this was a write
(if (not (member cmd api:read-only-queries))
(let ((start-time (current-seconds)))
(mutex-lock! *db-multi-sync-mutex*)
;; (if (not (hash-table-ref/default *db-local-sync* run-id #f))
;; just set it every time. Is a write more expensive than a read and does it matter?
(hash-table-set! *db-local-sync* (or run-id 0) start-time) ;; the oldest "write"
(mutex-unlock! *db-multi-sync-mutex*)))
res))))
(define (rmt:send-receive-no-auto-client-setup connection-info cmd run-id params)
(let* ((run-id (if run-id run-id 0))
;; (jparams (db:obj->string params)) ;; (rmt:dat->json-str params))
(res (handle-exceptions
exn
#f
(http-transport:client-api-send-receive run-id connection-info cmd params))))
;; ((commfail) (vector #f "communications fail")))))
(if (and res (vector-ref res 0))
(vector-ref res 1) ;;; YES!! THIS IS CORRECT!! CHANGE IT HERE, THEN CHANGE rmt:send-receive ALSO!!!
#f)))
;; (db:string->obj (vector-ref dat 1))
;; (begin
;; (debug:print-error 0 *default-log-port* "rmt:send-receive-no-auto-client-setup failed, attempting to continue. Got " dat)
;; dat))))
;; Wrap json library for strings (why the ports crap in the first place?)
(define (rmt:dat->json-str dat)
(with-output-to-string
(lambda ()
(json-write dat))))
(define (rmt:json-str->dat json-str)
(with-input-from-string json-str
(lambda ()
(json-read))))
;;======================================================================
;;
;; A C T U A L A P I C A L L S
;;
;;======================================================================
;;======================================================================
;; S E R V E R
;;======================================================================
(define (rmt:kill-server run-id)
(rmt:send-receive 'kill-server run-id (list run-id)))
(define (rmt:start-server run-id)
(rmt:send-receive 'start-server 0 (list run-id)))
;;======================================================================
;; M I S C
;;======================================================================
(define (rmt:login run-id)
(rmt:send-receive 'login run-id (list *toppath* megatest-version run-id *my-client-signature*)))
;; This login does no retries under the hood - it acts a bit like a ping.
;; Deprecated for nmsg-transport.
;;
(define (rmt:login-no-auto-client-setup connection-info run-id)
(case *transport-type*
((http)(rmt:send-receive-no-auto-client-setup connection-info 'login run-id (list *toppath* megatest-version run-id *my-client-signature*)))
;;((nmsg)(nmsg-transport:client-api-send-receive run-id connection-info 'login (list *toppath* megatest-version run-id *my-client-signature*)))
))
;; hand off a call to one of the db:queries statements
;; added run-id to make looking up the correct db possible
;;
(define (rmt:general-call stmtname run-id . params)
(rmt:send-receive 'general-call run-id (append (list stmtname run-id) params)))
;; (define (rmt:sync-inmem->db run-id)
;; (rmt:send-receive 'sync-inmem->db run-id '()))
(define (rmt:sdb-qry qry val run-id)
;; add caching if qry is 'getid or 'getstr
(rmt:send-receive 'sdb-qry run-id (list qry val)))
;; NOT COMPLETED
(define (rmt:runtests user run-id testpatt params)
(rmt:send-receive 'runtests run-id testpatt))
;;======================================================================
;; K E Y S
;;======================================================================
;; These require run-id because the values come from the run!
;;
(define (rmt:get-key-val-pairs run-id)
(rmt:send-receive 'get-key-val-pairs run-id (list run-id)))
(define (rmt:get-keys)
(rmt:send-receive 'get-keys #f '()))
(define (rmt:get-key-vals run-id)
(rmt:send-receive 'get-key-vals #f (list run-id)))
(define (rmt:get-targets)
(rmt:send-receive 'get-targets #f '()))
(define (rmt:get-target run-id)
(rmt:send-receive 'get-target run-id (list run-id)))
;;======================================================================
;; T E S T S
;;======================================================================
;; Just some syntatic sugar
(define (rmt:register-test run-id test-name item-path)
(rmt:general-call 'register-test run-id run-id test-name item-path))
(define (rmt:get-test-id run-id testname item-path)
(rmt:send-receive 'get-test-id run-id (list run-id testname item-path)))
(define (rmt:get-test-info-by-id run-id test-id)
(if (and (number? run-id)(number? test-id))
(rmt:send-receive 'get-test-info-by-id run-id (list run-id test-id))
(begin
(debug:print 0 *default-log-port* "WARNING: Bad data handed to rmt:get-test-info-by-id run-id=" run-id ", test-id=" test-id)
(print-call-chain (current-error-port))
#f)))
(define (rmt:test-get-rundir-from-test-id run-id test-id)
(rmt:send-receive 'test-get-rundir-from-test-id run-id (list run-id test-id)))
(define (rmt:open-test-db-by-test-id run-id test-id #!key (work-area #f))
(let* ((test-path (if (string? work-area)
work-area
(rmt:test-get-rundir-from-test-id run-id test-id))))
(debug:print 3 *default-log-port* "TEST PATH: " test-path)
(open-test-db test-path)))
;; WARNING: This currently bypasses the transaction wrapped writes system
(define (rmt:test-set-state-status-by-id run-id test-id newstate newstatus newcomment)
(rmt:send-receive 'test-set-state-status-by-id run-id (list run-id test-id newstate newstatus newcomment)))
(define (rmt:set-tests-state-status run-id testnames currstate currstatus newstate newstatus)
(rmt:send-receive 'set-tests-state-status run-id (list run-id testnames currstate currstatus newstate newstatus)))
(define (rmt:get-tests-for-run run-id testpatt states statuses offset limit not-in sort-by sort-order qryvals last-update mode)
(if (number? run-id)
(rmt:send-receive 'get-tests-for-run run-id (list run-id testpatt states statuses offset limit not-in sort-by sort-order qryvals last-update mode))
(begin
(debug:print-error 0 *default-log-port* "rmt:get-tests-for-run called with bad run-id=" run-id)
(print-call-chain (current-error-port))
'())))
;; get stuff via synchash
(define (rmt:synchash-get run-id proc synckey keynum params)
(rmt:send-receive 'synchash-get run-id (list run-id proc synckey keynum params)))
;; IDEA: Threadify these - they spend a lot of time waiting ...
;;
(define (rmt:get-tests-for-runs-mindata run-ids testpatt states status not-in)
(let ((multi-run-mutex (make-mutex))
(run-id-list (if run-ids
run-ids
(rmt:get-all-run-ids)))
(result '()))
(if (null? run-id-list)
'()
(let loop ((hed (car run-id-list))
(tal (cdr run-id-list))
(threads '()))
(if (> (length threads) 5)
(loop hed tal (filter (lambda (th)(not (member (thread-state th) '(terminated dead)))) threads))
(let* ((newthread (make-thread
(lambda ()
(let ((res (rmt:send-receive 'get-tests-for-run-mindata hed (list hed testpatt states status not-in))))
(if (list? res)
(begin
(mutex-lock! multi-run-mutex)
(set! result (append result res))
(mutex-unlock! multi-run-mutex))
(debug:print-error 0 *default-log-port* "get-tests-for-run-mindata failed for run-id " hed ", testpatt " testpatt ", states " states ", status " status ", not-in " not-in))))
(conc "multi-run-thread for run-id " hed)))
(newthreads (cons newthread threads)))
(thread-start! newthread)
(thread-sleep! 0.05) ;; give that thread some time to start
(if (null? tal)
newthreads
(loop (car tal)(cdr tal) newthreads))))))
result))
;; ;; IDEA: Threadify these - they spend a lot of time waiting ...
;; ;;
;; (define (rmt:get-tests-for-runs-mindata run-ids testpatt states status not-in)
;; (let ((run-id-list (if run-ids
;; run-ids
;; (rmt:get-all-run-ids))))
;; (apply append (map (lambda (run-id)
;; (rmt:send-receive 'get-tests-for-run-mindata run-id (list run-ids testpatt states status not-in)))
;; run-id-list))))
(define (rmt:delete-test-records run-id test-id)
(rmt:send-receive 'delete-test-records run-id (list run-id test-id)))
;; This is not needed as test steps are deleted on test delete call
;;
;; (define (rmt:delete-test-step-records run-id test-id)
;; (rmt:send-receive 'delete-test-step-records run-id (list run-id test-id)))
(define (rmt:test-set-status-state run-id test-id status state msg)
(rmt:send-receive 'test-set-status-state run-id (list run-id test-id status state msg)))
(define (rmt:test-toplevel-num-items run-id test-name)
(rmt:send-receive 'test-toplevel-num-items run-id (list run-id test-name)))
;; (define (rmt:get-previous-test-run-record run-id test-name item-path)
;; (rmt:send-receive 'get-previous-test-run-record run-id (list run-id test-name item-path)))
(define (rmt:get-matching-previous-test-run-records run-id test-name item-path)
(rmt:send-receive 'get-matching-previous-test-run-records run-id (list run-id test-name item-path)))
(define (rmt:test-get-logfile-info run-id test-name)
(rmt:send-receive 'test-get-logfile-info run-id (list run-id test-name)))
(define (rmt:test-get-records-for-index-file run-id test-name)
(rmt:send-receive 'test-get-records-for-index-file run-id (list run-id test-name)))
(define (rmt:get-testinfo-state-status run-id test-id)
(rmt:send-receive 'get-testinfo-state-status run-id (list run-id test-id)))
(define (rmt:test-set-log! run-id test-id logf)
(if (string? logf)(rmt:general-call 'test-set-log run-id logf test-id)))
(define (rmt:test-set-top-process-pid run-id test-id pid)
(rmt:send-receive 'test-set-top-process-pid run-id (list run-id test-id pid)))
(define (rmt:test-get-top-process-pid run-id test-id)
(rmt:send-receive 'test-get-top-process-pid run-id (list run-id test-id)))
(define (rmt:get-run-ids-matching-target keynames target res runname testpatt statepatt statuspatt)
(rmt:send-receive 'get-run-ids-matching-target #f (list keynames target res runname testpatt statepatt statuspatt)))
;; NOTE: This will open and access ALL run databases.
;;
(define (rmt:test-get-paths-matching-keynames-target-new keynames target res testpatt statepatt statuspatt runname)
(let ((run-ids (rmt:get-run-ids-matching-target keynames target res runname testpatt statepatt statuspatt)))
(apply append
(map (lambda (run-id)
(rmt:send-receive 'test-get-paths-matching-keynames-target-new run-id (list run-id keynames target res testpatt statepatt statuspatt runname)))
run-ids))))
;; (define (rmt:get-run-ids-matching keynames target res)
;; (rmt:send-receive #f 'get-run-ids-matching (list keynames target res)))
(define (rmt:get-prereqs-not-met run-id waitons ref-test-name ref-item-path #!key (mode '(normal))(itemmaps #f))
(rmt:send-receive 'get-prereqs-not-met run-id (list run-id waitons ref-test-name ref-item-path mode itemmaps)))
(define (rmt:get-count-tests-running-for-run-id run-id)
(rmt:send-receive 'get-count-tests-running-for-run-id run-id (list run-id)))
;; Statistical queries
(define (rmt:get-count-tests-running run-id)
(rmt:send-receive 'get-count-tests-running run-id (list run-id)))
(define (rmt:get-count-tests-running-for-testname run-id testname)
(rmt:send-receive 'get-count-tests-running-for-testname run-id (list run-id testname)))
(define (rmt:get-count-tests-running-in-jobgroup run-id jobgroup)
(rmt:send-receive 'get-count-tests-running-in-jobgroup run-id (list run-id jobgroup)))
;; state and status are extra hints not usually used in the calculation
;;
(define (rmt:roll-up-pass-fail-counts run-id test-name item-path state status)
(rmt:send-receive 'roll-up-pass-fail-counts run-id (list run-id test-name item-path state status)))
(define (rmt:update-pass-fail-counts run-id test-name)
(rmt:general-call 'update-pass-fail-counts run-id test-name test-name test-name))
(define (rmt:top-test-set-per-pf-counts run-id test-name)
(rmt:send-receive 'top-test-set-per-pf-counts run-id (list run-id test-name)))
(define (rmt:get-raw-run-stats run-id)
(rmt:send-receive 'get-raw-run-stats run-id (list run-id)))
;;======================================================================
;; R U N S
;;======================================================================
(define (rmt:get-run-info run-id)
(rmt:send-receive 'get-run-info run-id (list run-id)))
(define (rmt:get-num-runs runpatt)
(rmt:send-receive 'get-num-runs #f (list runpatt)))
;; Use the special run-id == #f scenario here since there is no run yet
(define (rmt:register-run keyvals runname state status user)
(rmt:send-receive 'register-run #f (list keyvals runname state status user)))
(define (rmt:get-run-name-from-id run-id)
(rmt:send-receive 'get-run-name-from-id run-id (list run-id)))
(define (rmt:delete-run run-id)
(rmt:send-receive 'delete-run run-id (list run-id)))
(define (rmt:update-run-stats run-id stats)
(rmt:send-receive 'update-run-stats #f (list run-id stats)))
(define (rmt:delete-old-deleted-test-records)
(rmt:send-receive 'delete-old-deleted-test-records #f '()))
(define (rmt:get-runs runpatt count offset keypatts)
(rmt:send-receive 'get-runs #f (list runpatt count offset keypatts)))
(define (rmt:get-all-run-ids)
(rmt:send-receive 'get-all-run-ids #f '()))
(define (rmt:get-prev-run-ids run-id)
(rmt:send-receive 'get-prev-run-ids #f (list run-id)))
(define (rmt:lock/unlock-run run-id lock unlock user)
(rmt:send-receive 'lock/unlock-run #f (list run-id lock unlock user)))
;; set/get status
(define (rmt:get-run-status run-id)
(rmt:send-receive 'get-run-status #f (list run-id)))
(define (rmt:set-run-status run-id run-status #!key (msg #f))
(rmt:send-receive 'set-run-status #f (list run-id run-status msg)))
(define (rmt:update-run-event_time run-id)
(rmt:send-receive 'update-run-event_time #f (list run-id)))
(define (rmt:get-runs-by-patt keys runnamepatt targpatt offset limit fields last-runs-update) ;; fields of #f uses default
(rmt:send-receive 'get-runs-by-patt #f (list keys runnamepatt targpatt offset limit fields last-runs-update)))
(define (rmt:find-and-mark-incomplete run-id ovr-deadtime)
(if (rmt:send-receive 'have-incompletes? run-id (list run-id ovr-deadtime))
(rmt:send-receive 'mark-incomplete run-id (list run-id ovr-deadtime))))
(define (rmt:get-main-run-stats run-id)
(rmt:send-receive 'get-main-run-stats #f (list run-id)))
(define (rmt:get-var varname)
(rmt:send-receive 'get-var #f (list varname)))
(define (rmt:set-var varname value)
(rmt:send-receive 'set-var #f (list varname value)))
;;======================================================================
;; M U L T I R U N Q U E R I E S
;;======================================================================
;; Need to move this to multi-run section and make associated changes
(define (rmt:find-and-mark-incomplete-all-runs #!key (ovr-deadtime #f))
(let ((run-ids (rmt:get-all-run-ids)))
(for-each (lambda (run-id)
(rmt:find-and-mark-incomplete run-id ovr-deadtime))
run-ids)))
;; get the previous record for when this test was run where all keys match but runname
;; returns #f if no such test found, returns a single test record if found
;;
;; Run this at the client end since we have to connect to multiple run-id dbs
;;
(define (rmt:get-previous-test-run-record run-id test-name item-path)
(let* ((keyvals (rmt:get-key-val-pairs run-id))
(keys (rmt:get-keys))
(selstr (string-intersperse keys ","))
(qrystr (string-intersperse (map (lambda (x)(conc x "=?")) keys) " AND ")))
(if (not keyvals)
#f
(let ((prev-run-ids (rmt:get-prev-run-ids run-id)))
;; for each run starting with the most recent look to see if there is a matching test
;; if found then return that matching test record
(debug:print 4 *default-log-port* "selstr: " selstr ", qrystr: " qrystr ", keyvals: " keyvals ", previous run ids found: " prev-run-ids)
(if (null? prev-run-ids) #f
(let loop ((hed (car prev-run-ids))
(tal (cdr prev-run-ids)))
(let ((results (rmt:get-tests-for-run hed (conc test-name "/" item-path) '() '() ;; run-id testpatt states statuses
#f #f #f ;; offset limit not-in hide/not-hide
#f #f #f #f 'normal))) ;; sort-by sort-order qryvals last-update mode
(debug:print 4 *default-log-port* "Got tests for run-id " run-id ", test-name " test-name ", item-path " item-path ": " results)
(if (and (null? results)
(not (null? tal)))
(loop (car tal)(cdr tal))
(if (null? results) #f
(car results))))))))))
(define (rmt:get-run-stats)
(rmt:send-receive 'get-run-stats #f '()))
;;======================================================================
;; S T E P S
;;======================================================================
;; Getting steps is more complicated.
;;
;; If given work area
;; 1. Find the testdat.db file
;; 2. Open the testdat.db file and do the query
;; If not given the work area
;; 1. Do a remote call to get the test path
;; 2. Continue as above
;;
;;(define (rmt:get-steps-for-test run-id test-id)
;; (rmt:send-receive 'get-steps-data run-id (list test-id)))
(define (rmt:teststep-set-status! run-id test-id teststep-name state-in status-in comment logfile)
(let* ((state (items:check-valid-items "state" state-in))
(status (items:check-valid-items "status" status-in)))
(if (or (not state)(not status))
(debug:print 3 *default-log-port* "WARNING: Invalid " (if status "status" "state")
" value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
(rmt:send-receive 'teststep-set-status! run-id (list run-id test-id teststep-name state-in status-in comment logfile))))
(define (rmt:get-steps-for-test run-id test-id)
(rmt:send-receive 'get-steps-for-test run-id (list run-id test-id)))
;;======================================================================
;; T E S T D A T A
;;======================================================================
(define (rmt:read-test-data run-id test-id categorypatt #!key (work-area #f))
(rmt:send-receive 'read-test-data run-id (list run-id test-id categorypatt)))
;; (let ((tdb (rmt:open-test-db-by-test-id run-id test-id work-area: work-area)))
;; (if tdb
;; (tdb:read-test-data tdb test-id categorypatt)
;; '())))
(define (rmt:testmeta-add-record testname)
(rmt:send-receive 'testmeta-add-record #f (list testname)))
(define (rmt:testmeta-get-record testname)
(rmt:send-receive 'testmeta-get-record #f (list testname)))
(define (rmt:testmeta-update-field test-name fld val)
(rmt:send-receive 'testmeta-update-field #f (list test-name fld val)))
(define (rmt:test-data-rollup run-id test-id status)
(rmt:send-receive 'test-data-rollup run-id (list run-id test-id status)))
(define (rmt:csv->test-data run-id test-id csvdata)
(rmt:send-receive 'csv->test-data run-id (list run-id test-id csvdata)))
;;======================================================================
;; T A S K S
;;======================================================================
(define (rmt:tasks-find-task-queue-records target run-name test-patt state-patt action-patt)
(rmt:send-receive 'find-task-queue-records #f (list target run-name test-patt state-patt action-patt)))
(define (rmt:tasks-add action owner target runname testpatt params)
(rmt:send-receive 'tasks-add #f (list action owner target runname testpatt params)))
(define (rmt:tasks-set-state-given-param-key param-key new-state)
(rmt:send-receive 'tasks-set-state-given-param-key #f (list param-key new-state)))
(define (rmt:tasks-get-last target runname)
(rmt:send-receive 'tasks-get-last #f (list target runname)))
;;======================================================================
;; A R C H I V E S
;;======================================================================
(define (rmt:archive-get-allocations testname itempath dneeded)
(rmt:send-receive 'archive-get-allocations #f (list testname itempath dneeded)))
(define (rmt:archive-register-block-name bdisk-id archive-path)
(rmt:send-receive 'archive-register-block-name #f (list bdisk-id archive-path)))
(define (rmt:archive-allocate-testsuite/area-to-block block-id testsuite-name areakey)
(rmt:send-receive 'archive-allocate-test-to-block #f (list block-id testsuite-name areakey)))
(define (rmt:archive-register-disk bdisk-name bdisk-path df)
(rmt:send-receive 'archive-register-disk #f (list bdisk-name bdisk-path df)))
(define (rmt:test-set-archive-block-id run-id test-id archive-block-id)
(rmt:send-receive 'test-set-archive-block-id run-id (list run-id test-id archive-block-id)))
(define (rmt:test-get-archive-block-info archive-block-id)
(rmt:send-receive 'test-get-archive-block-info #f (list archive-block-id)))