;; Copyright 2006-2011, Matthew Welland.
;;
;; This program is made available under the GNU GPL version 2.0 or
;; greater. See the accompanying file COPYING for details.
;;
;; This program is distributed WITHOUT ANY WARRANTY; without even the
;; implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;; PURPOSE.
;;======================================================================
;; launch a task - this runs on the originating host, tests themselves
;;
;;======================================================================
(define (setup-for-run)
(set! *configinfo* (find-and-read-config (if (args:get-arg "-config")(args:get-arg "-config") "megatest.config")))
(set! *configdat* (if (car *configinfo*)(car *configinfo*) #f))
(set! *toppath* (if (car *configinfo*)(cadr *configinfo*) #f))
(if *toppath*
(setenv "MT_RUN_AREA_HOME" *toppath*) ;; to be deprecated
(print "ERROR: failed to find the top path to your run setup."))
*toppath*)
(define (setup-env-defaults db fname run-id . already-seen)
(let* ((keys (get-keys db))
(keyvals (get-key-vals db run-id))
(thekey (string-intersperse (map (lambda (x)(if x x "-na-")) keyvals) "/"))
(confdat (read-config fname))
(whatfound (make-hash-table))
(sections (list "default" thekey)))
;; (print "Using key=\"" thekey "\"")
(for-each
(lambda (section)
(let ((section-dat (hash-table-ref/default confdat section #f)))
(if section-dat
(for-each
(lambda (envvar)
(hash-table-set! whatfound section (+ (hash-table-ref/default whatfound section 0) 1))
(setenv envvar (cadr (assoc envvar section-dat))))
(map car section-dat)))))
sections)
(if (and (not (null? already-seen))
(not (car already-seen)))
(begin
(print "Key settings found in runconfig.config:")
(for-each (lambda (fullkey)
(format #t "~20a ~a\n" fullkey (hash-table-ref/default whatfound fullkey 0)))
sections)
(print "---")
(set! *already-seen-runconfig-info* #t)))))
(define (get-best-disk confdat)
(let* ((disks (hash-table-ref/default confdat "disks" #f))
(best #f)
(bestsize 0))
(if disks
(for-each
(lambda (disk-num)
(let* ((dirpath (cadr (assoc disk-num disks)))
(freespc (if (directory? dirpath)
(get-df dirpath)
(begin
(print "WARNING: path " dirpath " in [disks] section not valid")
0))))
(if (> freespc bestsize)
(begin
(set! best dirpath)
(set! bestsize freespc)))))
(map car disks)))
best))
(define (create-work-area db run-id test-path disk-path testname itemdat)
(let* ((run-info (db-get-run-info db run-id))
(item-path (let ((ip (item-list->path itemdat)))
(if (equal? ip "") "" (conc "/" ip))))
(runname (db-get-value-by-header (db:get-row run-info)
(db:get-header run-info)
"runname"))
(key-vals (get-key-vals db run-id))
(key-str (string-intersperse key-vals "/"))
(dfullp (conc disk-path "/" key-str "/" runname "/" testname
item-path))
(toptest-path (conc disk-path "/" key-str "/" runname "/" testname))
(runsdir (config-lookup *configdat* "setup" "runsdir"))
(lnkpath (conc (if runsdir runsdir (conc *toppath* "/runs"))
"/" key-str "/" runname item-path)))
;; since this is an iterated test this is as good a place as any to
;; update the toptest record with its location rundir
(if (not (equal? item-path ""))
(db:test-set-rundir! db run-id testname "" toptest-path))
(print "Setting up test run area")
(print " - creating run area in " dfullp)
(system (conc "mkdir -p " dfullp))
(print " - creating link from " dfullp "/" testname " to " lnkpath)
(system (conc "mkdir -p " lnkpath))
(if (file-exists? (conc lnkpath "/" testname))
(system (conc "rm -f " lnkpath "/" testname)))
(system (conc "ln -sf " dfullp " " lnkpath "/" testname))
(if (directory? dfullp)
(begin
(system (conc "rsync -av " test-path "/ " dfullp "/"))
(list dfullp toptest-path))
(list #f #f))))
;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area
;; 4. remotely run the test on allocated host
;; - could be ssh to host from hosts table (update regularly with load)
;; - could be netbatch
;; (launch-test db (cadr status) test-conf))
(define (launch-test db run-id test-conf keyvallst test-name test-path itemdat)
(let ((launcher (config-lookup *configdat* "jobtools" "launcher"))
(runscript (config-lookup test-conf "setup" "runscript"))
(diskspace (config-lookup test-conf "requirements" "diskspace"))
(memory (config-lookup test-conf "requirements" "memory"))
(hosts (config-lookup *configdat* "jobtools" "workhosts"))
(remote-megatest (config-lookup *configdat* "setup" "executable"))
(local-megatest (car (argv)))
;; (item-path (item-list->path itemdat)) test-path is the full path including the item-path
(work-area #f)
(toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all
(diskpath #f)
(cmdparms #f)
(fullcmd #f) ;; (define a (with-output-to-string (lambda ()(write x))))
(mt-bindir-path #f))
(if hosts (set! hosts (string-split hosts)))
(if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
(set! mt-bindir-path (pathname-directory remote-megatest))
(if launcher (set! launcher (string-split launcher)))
;; set up the run work area for this test
(set! diskpath (get-best-disk *configdat*))
(if diskpath
(let ((dat (create-work-area db run-id test-path diskpath test-name itemdat)))
(set! work-area (car dat))
(set! toptest-work-area (cadr dat)))
(begin
(set! work-area test-path)
(print "WARNING: No disk work area specified - running in the test directory")))
(set! cmdparms (base64:base64-encode (with-output-to-string
(lambda () ;; (list 'hosts hosts)
(write (list (list 'testpath test-path)
(list 'work-area work-area)
(list 'test-name test-name)
(list 'runscript runscript)
(list 'run-id run-id )
(list 'itemdat itemdat )
(list 'megatest remote-megatest)
(list 'runname (args:get-arg ":runname"))
(list 'mt-bindir-path mt-bindir-path))))))) ;; (string-intersperse keyvallst " "))))
(change-directory work-area) ;; so that log files from the launch process don't clutter the test dir
(cond
((and launcher hosts) ;; must be using ssh hostname
(set! fullcmd (append launcher (car hosts)(list remote-megatest "-execute" cmdparms))))
(launcher
(set! fullcmd (append launcher (list remote-megatest "-execute" cmdparms))))
(else
(set! fullcmd (list remote-megatest "-execute" cmdparms))))
(if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm"))))
(print "Launching megatest for test " test-name " in " work-area" ...")
(test-set-status! db run-id test-name "LAUNCHED" "n/a" itemdat) ;; (if launch-results launch-results "FAILED"))
;; set
;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done
(let* ((commonprevvals (alist->env-vars
(hash-table-ref/default *configdat* "env-override" '())))
(testprevvals (alist->env-vars
(hash-table-ref/default test-conf "pre-launch-env-overrides" '())))
(miscprevvals (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
(append (list (list "MT_TEST_NAME" test-name)
(list "MT_ITEM_INFO" (conc itemdat))
(list "MT_RUNNAME" (args:get-arg ":runname")))
itemdat)))
(launch-results (apply cmd-run-proc-each-line
(car fullcmd)
print
(cdr fullcmd)))) ;; launcher fullcmd)));; (apply cmd-run-proc-each-line launcher print fullcmd))) ;; (cmd-run->list fullcmd))
(print "Launching completed, updating db")
(alist->env-vars miscprevvals)
(alist->env-vars testprevvals)
(alist->env-vars commonprevvals))))