Megatest

	  (hash-table-set! *target* run-id thekey)
	  thekey))))

;;======================================================================
;;  T E S T S
;;======================================================================
















;; states and statuses are lists, turn them into ("PASS","FAIL"...) and use NOT IN
;; i.e. these lists define what to NOT show.
;; states and statuses are required to be lists, empty is ok
;; not-in #t = above behaviour, #f = must match
(define (db:get-tests-for-run db run-id testpatt states statuses 
			      #!key (not-in #t)
			      (sort-by #f) ;; 'rundir 'event_time

(define (cdb:pass-fail-counts serverdat test-id fail-count pass-count)
  (cdb:client-call serverdat 'pass-fail-counts #t *default-numtries* fail-count pass-count test-id))

(define (cdb:tests-register-test serverdat run-id test-name item-path)
  (let ((item-paths (if (equal? item-path "")
			(list item-path)
			(list item-path ""))))
    (for-each (lambda (pth)
		(cdb:client-call serverdat 'register-test #t *default-numtries* run-id test-name pth))
	      item-paths)))

(define (cdb:flush-queue serverdat)
  (cdb:client-call serverdat 'flush #f *default-numtries*))

(define (cdb:kill-server serverdat)
  (cdb:client-call serverdat 'killserver #t *default-numtries*))

       (if (directory? path)
	   (debug:print 2 "Found path: " path)
	   (debug:print 2 "No such path: " path)))
     db
     "SELECT rundir,final_logf FROM tests WHERE run_id=? AND testname=? AND item_path='';"
     run-id test-name)
    res))

;;======================================================================
;; A G R E G A T E D   T R A N S A C T I O N   D B   W R I T E S 
;;======================================================================

(define db:queries 
  (list '(register-test          "INSERT OR IGNORE INTO tests (run_id,testname,event_time,item_path,state,status) VALUES (?,?,strftime('%s','now'),?,'NOT_STARTED','n/a');")
	'(state-status           "UPDATE tests SET state=?,status=? WHERE id=?;")
	'(state-status-msg       "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;")
	'(pass-fail-counts       "UPDATE tests SET fail_count=?,pass_count=? WHERE id=?;")
	;; test_data-pf-rollup is used to set a tests PASS/FAIL based on the pass/fail info from the steps

(define *db* #f) ;; this is only for the repl, do not use in general!!!!

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "megatest-fossil-hash.scm")

(use trace dot-locking)
(trace
 cdb:tests-register-test
 cdb:client-call
)
;;  cdb:remote-run
;;  cdb:test-set-status-state
;;  change-directory
;;  db:process-queue-item
;;  db:test-get-logfile-info
;;  db:teststep-set-status!
;;  nice-path

;; test-records is a hash table testname:item_path => vector < testname testconfig waitons priority items-info ... >
(define (runs:run-tests-queue run-id runname test-records keyvallst flags test-patts)
    ;; At this point the list of parent tests is expanded 
    ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", keyvallst: " keyvallst " flags: " (hash-table->alist flags))
  (let ((sorted-test-names (tests:sort-by-priority-and-waiton test-records))
	(test-registery    (make-hash-table))
	(registery-mutex   (make-mutex))
	(num-retries        0)
	(max-retries       (config-lookup *configdat* "setup" "maxretries")))
    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))
    (if (not (null? sorted-test-names))
	(let loop ((hed         (car sorted-test-names))
		   (tal         (cdr sorted-test-names))
		   (reruns      '()))

		 ((not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path)) ;; This test/itempath is not to be run
		  ;; else the run is stuck, temporarily or permanently
		  ;; but should check if it is due to lack of resources vs. prerequisites
		  (debug:print-info 1 "Skipping " (tests:testqueue-get-testname test-record) " " item-path " as it doesn't match " test-patts)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (car tal)(cdr tal) reruns)))
		 ;; Registery has been started for this test but has not yet completed
		 ;; this should be rare, the case where there are only a couple of tests and the db is slow
		 ;; delay a short while and continue
		 ((eq? (hash-table-ref/default test-registery (runs:make-full-test-name test-name item-path) #f) 'start)
		  (thread-sleep! 0.01)
		  (loop (car newtal)(cdr newtal) reruns))
		 ((not (hash-table-ref/default test-registery (runs:make-full-test-name test-name item-path) #f))

		  (debug:print-info 4 "Pre-registering test " test-name "/" item-path " to create placeholder" )
		  ;; NEED TO THREADIFY THIS
		  ;; (let ((th (make-thread (lambda ()
		  ;;       		   (print "Got here! AA")
		  ;;       		   (mutex-lock! registery-mutex)
		  ;;       		   (hash-table-set! test-registery (runs:make-full-test-name test-name item-path) 'start)
		  ;;       		   (mutex-unlock! registery-mutex)
		         		   (cdb:tests-register-test #f run-id test-name item-path)
		  ;;       		   (print "Got here! AB")
		  ;;       		   (mutex-lock! registery-mutex)
		         		   (hash-table-set! test-registery (runs:make-full-test-name test-name item-path) 'done)
		  ;;       		   (mutex-unlock! registery-mutex))
		  ;;       		 (conc test-name "/" item-path))))
		  ;;   (thread-start! th))
		  ;; (thread-sleep! *global-delta*)
(runs:shrink-can-run-more-tests-delay)
		  (loop (car newtal)(cdr newtal) reruns))
		 ((not have-resources) ;; simply try again after waiting a second
		  (debug:print-info 1 "no resources to run new tests, waiting ...")
		  ;; (thread-sleep! (+ 2 *global-delta*))
		  ;; could have done hed tal here but doing car/cdr of newtal to rotate tests

	    ;;
	    ;; NB// for the above line. I want the test to be registered long before this routine gets called!
	    ;;
	    (set! test-id (open-run-close db:get-test-id db run-id test-name item-path))
	    (if (not test-id)
		(begin
		  (debug:print 2 "WARN: Test not pre-created? test-name=" test-name ", item-path=" item-path ", run-id=" run-id)
		  (cdb:tests-register-test #f run-id test-name item-path)
		  (set! test-id (open-run-close db:get-test-id db run-id test-name item-path))))
	    (debug:print-info 4 "test-id=" test-id ", run-id=" run-id ", test-name=" test-name ", item-path=\"" item-path "\"")
	    (set! testdat (cdb:get-test-info-by-id *runremote* test-id))))
      (set! test-id (db:test-get-id testdat))
      (change-directory test-path)
      (case (if force ;; (args:get-arg "-force")
		'NOT_STARTED

#!/bin/sh
if [ $NUMBER -lt 200 ];then 
   sleep $NUMBER
else
   sleep 200
fi

exit 0

# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh

# Test requirements are specified here
[requirements]
# waiton setup
priority 0

# Iteration for your tests are controlled by the items section
[items]
NUMBER #{scheme (string-intersperse (map number->string (sort (let loop ((a 0)(res '()))(if (< a 300)(loop (+ a 1)(cons a res)) res)) >)) " ")}

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo

# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh

# Test requirements are specified here
[requirements]
waiton bigrun
priority 0
mode itemmatch


# Iteration for your tests are controlled by the items section
[items]
NUMBER #{scheme (string-intersperse (map number->string (sort (let loop ((a 0)(res '()))(if (< a 300)(loop (+ a 1)(cons a res)) res)) >)) " ")}

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo