Megatest

# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

TODO
====

WW38
. Add test_rundat to no-sync ==> correction, put in <testdir>/.meta/test-run.dat
. Add STATE/STATUS transitions to .meta/test-run.dat or similar
. Swizzle update-test-rundat to operate on no-sync
. Swizzle update-run-duration, -uname-host and cpuload-diskfree to no-sync
. On state/status change update tests table with duration

WW15
. fill newview matrix with data, filter pipeline gui elements
. improve [script], especially indent handling

WW16
. split db into megatest.db (runs etc.) db/<something>.db
. release basic newview implementation

;;          logs directory you wish to log-rotate.
;;
(define (common:rotate-logs)
  (let* ((all-files (make-hash-table))
	 (stats     (make-hash-table))
	 (inc-stat  (lambda (key)
		      (hash-table-set! stats key (+ (hash-table-ref/default stats key 0) 1))))
	(max-allowed (string->number (or (configf:lookup *configdat* "setup" "max-logfiles") "600")))) ;; name -> age
    (if (not (directory-exists? "logs"))(create-directory "logs"))
    (directory-fold 
     (lambda (file rem)
       (handle-exceptions
	exn
	(begin
	  (debug:print-info 2 *default-log-port* "unable to rotate log " file ", probably handled by another process, this is safe to ignore. exn=" exn)

;;
(define (dboard:common-set-tabdat! commondat tabnum tabdat)
  (hash-table-set!
   (dboard:commondat-tabdats commondat)
   tabnum
   tabdat))

(define *updater-running* #f) ;; move this into one of the stucts

;; gets and calls updater list based on curr-tab-num
;;
(define (dboard:common-run-curr-updaters commondat #!key (tab-num #f))
  (if (dboard:common-get-tabdat commondat tab-num: tab-num) ;; only update if there is a tabdat
      (let* ((tnum     (or tab-num (dboard:commondat-curr-tab-num commondat)))
	     (updaters (hash-table-ref/default (dboard:commondat-updaters commondat)
					       tnum

	 (curr-updaters (hash-table-ref/default (dboard:commondat-updaters commondat) tnum '())))
    (hash-table-set! (dboard:commondat-updaters commondat)
		     tnum
		     (cons updater curr-updaters))))

;; data for each specific tab goes here
;;
(defstruct dboard:tabdat
  ;; flags
  ((already-running #f)                  : boolean)     ;; the updater is already running. skip
  ;; runs
  ((allruns         '())                 : list)        ;; list of dboard:rundat records
  ((allruns-by-id    (make-hash-table))  : hash-table)  ;; hash of run-id -> dboard:rundat records
  ((done-runs       '())                 : list)        ;; list of runs already drawn
  ((not-done-runs   '())                 : list)        ;; list of runs not yet drawn
  (header            #f)                                ;; header for decoding the run records
  (keys              #f)                                ;; keys for this run (i.e. target components)

;;
;;    NOTE: Yes, this is used
;;
(define (dboard:get-tests-for-run-duplicate tabdat run-id run testnamepatt key-vals)
  (let* ((start-time   (current-seconds))
	 (access-mode  (dboard:tabdat-access-mode tabdat))
         (num-to-get   (string->number (or (configf:lookup *configdat* "setup" "num-tests-to-get")
                                           "50"))) ;; was 200, which is fine in a normal run area.
	 (states       (hash-table-keys (dboard:tabdat-state-ignore-hash tabdat)))
	 (statuses     (hash-table-keys (dboard:tabdat-status-ignore-hash tabdat)))
         (do-not-use-db-file-timestamps #t) ;; (configf:lookup *configdat* "setup" "do-not-use-db-file-timestamps")) ;; this still hosts runs-summary-tab
         (do-not-use-query-timestamps   #t) ;; (configf:lookup *configdat* "setup" "do-not-use-query-timestamps")) ;; this no longer troubles runs-summary-tab
	 (sort-info    (get-curr-sort))
	 (sort-by      (vector-ref sort-info 1))
	 (sort-order   (vector-ref sort-info 2))

		   (elapsed-time (- (current-seconds) start-time)))
	      (if (null? all-test-ids)
		  (hash-table-delete! (dboard:tabdat-allruns-by-id tabdat) run-id)
		  (hash-table-set!    (dboard:tabdat-allruns-by-id tabdat) run-id run-struct))
	      (if (or (null? tal)
		      (> elapsed-time 2)) ;; stop loading data after 5 seconds, on the next call more data *should* be loaded since get-tests-for-run uses last update
		  (begin
		    #;(when (> elapsed-time 2)   
                      (debug:print 0 *default-log-port* "NOTE: updates are taking a long time, " elapsed-time "s elapsed.")
                      (let* ((old-val (iup:attribute *tim* "TIME"))
                             (new-val (number->string (inexact->exact (floor (* 2  (string->number old-val)))))))
                        (if (< (string->number new-val) 5000)
                            (begin
			      (debug:print 0 *default-log-port* "NOTE: increasing poll interval from "old-val" to "new-val)
			      (iup:attribute-set! *tim* "TIME" new-val)))))



		    (dboard:tabdat-allruns-set! tabdat new-res)
		    maxtests)
		  (if (> (dboard:rundat-run-data-offset run-struct) 0)
		      (loop run tal new-res newmaxtests) ;; not done getting data for this run
		      (loop (car tal)(cdr tal) new-res newmaxtests)))))))
    (dboard:tabdat-filters-changed-set! tabdat #f)
    (dboard:update-tree tabdat runs-hash header tb)
    (dboard:tabdat-already-running-set! tabdat #f)))

(define *collapsed* (make-hash-table))

(define (toggle-hide lnum uidat) ; fulltestname)
  (let* ((btn (vector-ref (dboard:uidat-get-lftcol uidat) lnum))
	 (fulltestname (iup:attribute btn "TITLE"))
	 (parts        (string-split fulltestname "("))

            sort-lb))) 
	)

        ;; insert extra widget here
        (if extra-widget
            extra-widget
            (iup:hbox)) ;; empty widget




        )))

     (let* ((status-toggles (map (lambda (status)
				   (iup:toggle (conc status)
					       #:fontsize 8 ;; btn-fontsz ;; "10"
					       ;; #:expand "HORIZONTAL"
					       #:action   (lambda (obj val)

   tabdat
   (hash-table-ref/default (dboard:tabdat-searchpatts tabdat) "runname" "%")
   (dboard:tabdat-numruns tabdat)
   (hash-table-ref/default (dboard:tabdat-searchpatts tabdat) "test-name" "%/%")
   ;; generate key patterns from the target stored in tabdat
   (let* ((dbkeys (dboard:tabdat-dbkeys tabdat)))
     (let ((fres   (if (dboard:tabdat-target tabdat)
		       (let ((ptparts (append (dboard:tabdat-target tabdat)(make-list (length dbkeys) "%"))))
			 (map (lambda (k v)(list k v)) dbkeys ptparts))
		       (let ((res '()))
			 (for-each (lambda (key)
				     (if (not (equal? key "runname"))
					 (let ((val (hash-table-ref/default (dboard:tabdat-searchpatts tabdat) key #f)))
					   (if val (set! res (cons (list key val) res))))))
				   dbkeys)
			 res))))
       fres)))
  #;(set! *updater-running* #f))

(define (dashboard:runs-tab-updater commondat tab-num)
  (debug:catch-and-dump 
   (lambda ()
     (let* ((tabdat (dboard:common-get-tabdat commondat tab-num: tab-num))
	    (dbkeys (dboard:tabdat-dbkeys tabdat)))
       (dashboard:do-update-rundat tabdat)

	 commondat 
	 (lambda ()
	   (dashboard:runs-tab-updater commondat 1))
	 tab-num: 2)
	(iup:callback-set! *tim*
			   "ACTION_CB"
			   (lambda (time-obj)
			     (if (not *updater-running*)
				 (begin
				   ;; (mutex-lock! (dboard:commondat-update-mutex commondat))
				   ;; (set! update-is-running (dboard:commondat-updating commondat))
				   ;;(if (not update-is-running)
				   ;;	   (dboard:commondat-updating-set! commondat #t))
				   ;;(mutex-unlock! (dboard:commondat-update-mutex commondat))
				   ;;(if (not update-is-running) ;; we know that the update was not running and we now have a lock on doing an update
				   ;;	   (begin
				   (set! *updater-running* #t)
				   (dboard:common-run-curr-updaters commondat) ;; (dashboard:run-update commondat)
				   (set! *updater-running* #f)
				   ;; (mutex-lock! (dboard:commondat-update-mutex commondat))
				   ;;  (dboard:commondat-updating-set! commondat #f)
				   ;;   (mutex-unlock! (dboard:commondat-update-mutex commondat)))
				   ))
			     1))))
      
      (let ((th1 (make-thread (lambda ()
				(thread-sleep! 1)
				(dboard:common-run-curr-updaters commondat 0) ;; force update of summary tab 
				) "update buttons once"))

	  (debug:print 0 *default-log-port* "ERROR: cannot read " infile)
          (debug:print 0 *default-log-port* "ERROR: run-dir is " run-dir)
          #f
          )
        (with-input-from-file infile read-lines)
	)))

;; check duration against test-run.dat file if it exists and update the value in
;; the db if necessary
;;
(define (db:adjust-run-duration dbstruct test-id run-dir event-time run-duration)
  (let* ((datf             (conc run-dir ".mt_data/test-run.dat"))
	 (modt             (if (and (file-exists? datf)
				    (file-read-access? datf))
			       (file-modification-time datf)
			       #f)) ;; (+ event-time run-duration))))
	 (alt-run-duration (if modt
			       (- modt event-time)
			       #f)))
    (if (and alt-run-duration
	     (> alt-run-duration run-duration))
	(begin
	  (debug:print 0 *default-log-port* "Test " test-id " run duration mismatch. Setting to " alt-run-duration)
	  (db:with-db
	   dbstruct #f #f
	   (lambda (db)
	     (sqlite3:execute db "UPDATE tests SET run_duration=? WHERE id=?;" alt-run-duration test-id)
	     #t)))
	#f))) ;; #f = we did NOT adjust the time
	      
(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
          ;; The default running-deadtime is 720 seconds = 12 minutes.
          ;; "(running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))" = 200 + (2 * (200 + 30 + 30))
         (deadtime-trim (or ovr-deadtime (configf:lookup-number *configdat* "setup" "deadtime")))

	 ;; HOWEVER: this code in run:test seems to work fine
	 ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
	 ;;                     (db:test-get-run_duration testdat)))
	 ;;                    600) 
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)
	    (if (not (db:adjust-run-duration dbstruct test-id run-dir event-time run-duration))
		(if (and (equal? uname "n/a")
			 (equal? item-path "")) ;; this is a toplevel test
		    ;; what to do with toplevel? call rollup?
		    (begin
		      (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		      (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		    (begin
		      (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))
		      (debug:print-info 0 *default-log-port* "Found old test in RUNNING state, test-id="
					test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)
					" event-time="event-time" run-duration="run-duration)))))
	  stmth1
	  run-id running-deadtime) ;; default time 720 seconds
	    
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)
	    (if (not (db:adjust-run-duration dbstruct test-id run-dir event-time run-duration))
		(if (and (equal? uname "n/a")
			 (equal? item-path "")) ;; this is a toplevel test
		    ;; what to do with toplevel? call rollup?
		    (begin
		      (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		      (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		    (begin
		      (debug:print-info 0 *default-log-port* "Found old test in REMOTEHOSTSTART state, test-id=" test-id
					" exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time
					" run-duration="run-duration)
		      (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))))
	  stmth2
	  run-id remotehoststart-deadtime) ;; default time 230 seconds
	 
	 ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
	 ;;
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row

  (let* ((run-ids (db:get-all-run-ids mtdb)))
    (for-each 
     (lambda (run-id)
       (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id)))
	 (db:prep-megatest.db-adj-test-ids (db:dbdat-get-db mtdb) run-id testrecs)))
     run-ids)))

;; Get test data using test_id, run-id is not used - but it will be!
;; 
(define (db:get-test-info-by-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   #f ;; run-id
   #f
   (lambda (db)

			   (round 
			    (- 
			     (current-seconds) 
			     start-seconds)))))
	 (kill-tries 0))
    ;; (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area)
    ;; (tests:set-full-meta-info test-id run-id (calc-minutes) work-area)
    (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area 10 update-db: #t)

    (let loop ((minutes   (calc-minutes))
	       (cpu-load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
	       (disk-free (get-df (current-directory)))
               (last-sync (current-seconds)))
      ;; (common:telemetry-log "zombie" (conc "launch:monitor-job -
      ;; top of loop encountered at "(current-seconds)" with
      ;; last-sync="last-sync))
      (let* ((over-time     (> (current-seconds) (+ last-sync update-period)))
             (new-cpu-load  (let* ((load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
                                   (delta (abs (- load cpu-load))))
                              (if (> delta 0.1) ;; don't bother updating with small changes
                                  load
                                  #f)))
             (new-disk-free (let* ((df    (if over-time ;; only get df every 30 seconds

             (do-sync       (or new-cpu-load new-disk-free over-time))

             (test-info   (rmt:get-test-info-by-id run-id test-id))
             (state       (db:test-get-state test-info))
             (status      (db:test-get-status test-info))
             (kill-reason  "no kill reason specified")
             (kill-job?    #f))
        #;(common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        (cond
         ((test-get-kill-request run-id test-id)
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))
          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" (- (current-seconds) start-seconds) " seconds, limit=" runtlim))
          (set! kill-job? #t))
         ((equal? status "DEAD")
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f update-db: #t)
          (rmt:set-state-status-and-roll-up-items run-id test-id 'foo "RUNNING" "n/a" "was marked dead; really still running.")
          ;;(set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests (might indicate really overloaded server or else overzealous setup.deadtime)") ;; MARK RUNNING
          (set! kill-job? #f)))

        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)
        (launch:handle-zombie-tests run-id)
        (if do-sync ;; save meta data about the running of this test



	    (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f))


	(if kill-job? 
	    (begin
              (debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second
	      ;;       between tries?

	    (begin
	      (thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses
	      (if (hash-table-ref/default misc-flags 'keep-going #f)  ;; keep originals for cpu-load and disk-free unless they change more than the allowed delta
		  (loop (calc-minutes)
                        (or new-cpu-load cpu-load)
                        (or new-disk-free disk-free)
                        (if do-sync (current-seconds) last-sync)))))))
    (tests:update-central-meta-info run-id test-id (get-cpu-load) (get-df (current-directory))(calc-minutes) #f #f update-db: #t))) ;; NOTE: Checking twice for keep-going is intentional


(define (launch:execute encoded-cmd)
  (let* ((cmdinfo    (common:read-encoded-string encoded-cmd))
	 (tconfigreg #f))
    (setenv "MT_CMDINFO" encoded-cmd)
    ;;(bb-check-path msg: "launch:execute incoming")

				(db:test-get-host        test-info)
				(begin
				  (debug:print 0 *default-log-port* "ERROR: failed to find a record for test-id " test-id ", exiting.")
				  (exit))))
		 (test-pid  (db:test-get-process_id  test-info)))
	    (cond
             ;; -mrw- I'm removing KILLREQ from this list so that a test in KILLREQ state is treated as a "do not run" flag.
	     ;; ((or (member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	     ;;  (and (equal? (db:test-get-state test-info) "COMPLETED")                           ;; completed/abort => rerun if asked
	     ;;	       (member (db:test-get-status test-info) '("ABORT"))))
	     ((member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	      (debug:print 0 *default-log-port* "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")

              (rmt:general-call 'set-test-start-time #f test-id)
              (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      ) ;; prime it for running

                 (item-path (vector-ref running-test 11)))
			       	(debug:print 0 *default-log-port* "test " test-name "/" item-path " not completed")
              (if (not (null? tal))
				  (loop (car tal) (cdr tal)))))))))))        
 
(define (launch:is-test-alive host pid)
  (if (and host pid (not (equal? host "n/a")))
      (let* ((is-local (equal? host (get-host-name)))
	     (ssh-cmd   (if is-local " " (conc "ssh " host " ")))
	     (cmd (conc ssh-cmd "pstree -A " pid))
	     (output (with-input-from-pipe cmd read-lines)))
	(debug:print 2 *default-log-port* "Running " cmd " received " output)
	(if (eq? (length output) 0)
	   #f
	   #t))
      #t))
 

(use format typed-records) ;; RADT => purpose of json format??

(declare (unit rmt))
(declare (uses api))
(declare (uses http-transport))
(include "common_records.scm")
(include "db_records.scm")

;; (declare (uses rmtmod))

;; (import rmtmod)

;;
;; THESE ARE ALL CALLED ON THE CLIENT SIDE!!!
;;

;; Just some syntatic sugar
(define (rmt:register-test run-id test-name item-path)
  (rmt:general-call 'register-test run-id run-id test-name item-path))

(define (rmt:get-test-id run-id testname item-path)
  (rmt:send-receive 'get-test-id run-id (list run-id testname item-path)))

;; run-id is NOT used - but it will be! 
;;
(define (rmt:get-test-info-by-id run-id test-id)
  (if (number? test-id)
      (let* ((testdat  (rmt:send-receive 'get-test-info-by-id run-id (list run-id test-id)))
	     (trundatf (conc (db:test-get-rundir testdat) "/.mt_data/test-run.dat")))
	;; now we can update a couple fields from the filesystem
	(if (and (db:test-get-rundir testdat)
		 (file-exists? trundatf))
	    (let* ((duration   (db:test-get-run_duration testdat))
		   (event-time (db:test-get-event_time   testdat))
		   (last-touch (file-modification-time trundatf)))
	      (db:test-set-run_duration! testdat (max duration (- last-touch event-time)))))
	testdat)
      (begin
	(debug:print 0 *default-log-port* "WARNING: Bad data handed to rmt:get-test-info-by-id run-id=" run-id ", test-id=" test-id)
	(print-call-chain (current-error-port))
	#f)))

(define (rmt:test-get-rundir-from-test-id run-id test-id)
  (rmt:send-receive 'test-get-rundir-from-test-id run-id (list run-id test-id)))

          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-4")
	  (let ((can-run-more    #f)) ;; (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs)))
	    (if (not can-run-more) #;(and (list? can-run-more)
		(car can-run-more))
		(let ((loop-list (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmaps))) ;; itemized test expanded here
		  (if loop-list
		      (apply loop loop-list)
                      (debug:print-info 4 *default-log-port* " -- Can't expand hed="hed)))


		;; if can't run more just loop with next possible test
		(loop (car newtal)(cdr newtal) reg reruns))))
         
	 ;; this case should not happen, added to help catch any bugs
	 ((and (list? items) itemdat)
          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-5")
	  (debug:print-error 0 *default-log-port* "Should not have a list of items in a test and the itemspath set - please report this")

		       (equal? server-key res))))
	      #t ;; (system (conc "touch " start-flag)) ;; lazy but safe
	      (begin
		(debug:print-info 0 *default-log-port* "Gating server start, last start: "
				  fmodtime ", delta: " delta ", reftime: " reftime ", all-go=" all-go)
		(thread-sleep! reftime)
		(server:wait-for-server-start-last-flag areapath)))))))

;; wait for server=start-last to be three seconds old - this might be what was causing the obfusc-skel fails
;;
#;(define (server:wait-for-server-start-last-flag areapath)
  (let* ((start-flag (conc areapath "/logs/server-start-last")))
    (if (file-exists? start-flag)
	(let* ((fmodtime (file-modification-time start-flag))
	       (reftime  (+ 2 (random 3)))
	       (delta    (- (current-seconds) fmodtime))
	       (all-go   (> delta reftime)))
	  (if all-go
	      #t ;; (system (conc "touch " start-flag)) ;; lazy but safe
	      (begin
		(debug:print-info 0 *default-log-port* "Gating server start, last start: "
				  fmodtime ", delta: " delta ", reftime: " reftime ", all-go=" all-go)
		(thread-sleep! 5)
		(server:wait-for-server-start-last-flag areapath))))
	#;(system (conc "touch " start-flag)))))

;; kind start up of servers, wait 40 seconds before allowing another server for a given
;; run-id to be launched
;;
(define (server:kind-run areapath)
  ;; look for $MT_RUN_AREA_HOME/logs/server-start-last
  ;; and wait for it to be at least 3 seconds old

	 (lambda (count)
	   (set! res count))
	 tdb
	 "SELECT count(id) FROM test_rundat;")
	res))
  0)

;; 
(define (tests:update-central-meta-info run-id test-id cpuload diskfree minutes uname hostname #!key (update-db #f)(tmpfree #f))
  (if (get-environment-variable "MT_TEST_RUN_DIR")
      (let* ((dest-dir (conc (get-environment-variable "MT_TEST_RUN_DIR") "/.mt_data"))
	     (or-dash  (lambda (instr)
			 (cond
			  ((not instr) "") ;; #f -> blank, indicates value unchanged since last measurement taken
			  ((string? instr)(if (string-search " " instr) (conc "\"" instr "\"") instr))
			  (else instr))))
	     (file-new (not (directory-exists? dest-dir))))
	(if file-new (create-directory dest-dir #t))
	(let* ((outp (open-output-file (conc dest-dir "/test-run.dat") #:append)))
	  (with-output-to-port outp
	    (lambda ()
	      (if file-new
		  (print "epoch_time,run_id,test_id,cpuload,diskfree,tmpfree,run_minutes,hostname,uname"))
	      (print (current-seconds) "," (or-dash run-id)   "," (or-dash test-id)  ","
		     (or-dash cpuload) "," (or-dash diskfree) "," (or-dash tmpfree)  ","
		     (or-dash minutes) "," (or-dash hostname) ","
		     (or-dash uname)))) ;; put uname last as it has spaces in it
	  (close-output-port outp)))
      (begin
	(rmt:general-call 'update-test-rundat run-id test-id (current-seconds) (or cpuload -1)(or diskfree -1) -1 (or minutes -1))))
  (if update-db
      (begin
	(if (and cpuload diskfree)
	    (rmt:general-call 'update-cpuload-diskfree run-id cpuload diskfree test-id))
	(if minutes 
	    (rmt:general-call 'update-run-duration run-id minutes test-id))
	(if (and uname hostname)
	    (rmt:general-call 'update-uname-host run-id uname hostname test-id)))))
  
;; This one is for running with no db access (i.e. via rmt: internally)
(define (tests:set-full-meta-info db test-id run-id minutes work-area remtries #!key (update-db #f))
;; (define (tests:set-full-meta-info test-id run-id minutes work-area)
;;  (let ((remtries 10))
  (let* ((cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory)))
	 (tmpfree  (get-df "/tmp"))
	 (uname    (get-uname "-srvpio"))
	 (hostname (get-host-name)))
    (tests:update-central-meta-info run-id test-id cpuload diskfree minutes uname hostname update-db: update-db tmpfree: tmpfree)))
    
;; (define (tests:set-partial-meta-info test-id run-id minutes work-area)
#;(define (tests:set-partial-meta-info test-id run-id minutes work-area remtries)
  (let* ((cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory)))
	 (remtries 10))
    (handle-exceptions

	 (let ((err-status ((condition-property-accessor 'sqlite3 'status #f) exn)))
	   (debug:print-error 0 *default-log-port* "tried for over a minute to update meta info and failed. Giving up")
	   (debug:print 0 *default-log-port* "EXCEPTION: database probably overloaded or unreadable.")
	   (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
	   (debug:print 5 *default-log-port* "exn=" (condition->list exn))
	   (debug:print 0 *default-log-port* " status:  " ((condition-property-accessor 'sqlite3 'status) exn))
	   (print-call-chain (current-error-port))))
     (tests:update-testdat-meta-info db test-id work-area cpuload diskfree minutes))))

	 
;;======================================================================
;; A R C H I V I N G
;;======================================================================

(define (test:archive db test-id)
  #f)

(define (test:archive-tests db keynames target)
  #f)