Megatest

(declare (uses launch))
(declare (uses server))
(declare (uses client))
(declare (uses tests))
(declare (uses genexample))
(declare (uses daemon))
(declare (uses db))
;; (declare (uses dcommon))

(declare (uses tdb))
(declare (uses mt))
(declare (uses api))
(declare (uses tasks)) ;; only used for debugging.
(declare (uses env))

(define *db* #f) ;; this is only for the repl, do not use in general!!!!

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")

  -runall                 : run all tests or as specified by -testpatt
  -remove-runs            : remove the data for a run, requires -runname and -testpatt
                            Optionally use :state and :status
  -set-state-status X,Y   : set state to X and status to Y, requires controls per -remove-runs
  -rerun FAIL,WARN...     : force re-run for tests with specificed status(s)
  -rerun-clean            : set all tests not COMPLETED+PASS,WARN,WAIVED to NOT_STARTED,n/a
                            and then run the specified testpatt with -preclean
  -rerun-all              : set all tests to NOT_STARTED,n/a and run with -preclean
  -lock                   : lock run specified by target and runname
  -unlock                 : unlock run specified by target and runname
  -set-run-status status  : sets status for run to status, requires -target and -runname
  -get-run-status         : gets status for run specified by target and runname
  -run-wait               : wait on run specified by target and runname
  -preclean               : remove the existing test directory before running the test
  -clean-cache            : remove the cached megatest.config and runconfig.config files

Selectors (e.g. use for -runtests, -remove-runs, -set-state-status, -list-runs etc.)
  -target key1/key2/...   : run for key1, key2, etc.
  -reqtarg key1/key2/...  : run for key1, key2, etc. but key1/key2 must be in runconfig
  -testpatt patt1/patt2,patt3/...  : % is wildcard
  -runname                : required, name for this particular test run
  -state                  : Applies to runs, tests or steps depending on context

  -load file.scm          : load and run file.scm
  -mark-incompletes       : find and mark incomplete tests
  -ping run-id|host:port  : ping server, exit with 0 if found
  -debug N|N,M,O...       : enable debug 0-N or N and M and O ...

Utilities
  -env2file fname         : write the environment to fname.csh and fname.sh
  -envcap fname=context   : save current variables labeled as context in file fname
  -refdb2dat refdb        : convert refdb to sexp or to format specified by -dumpmode
                            formats: perl, ruby, sqlite3, csv (for csv the -o param
                            will substitute %s for the sheet name in generating 
                            multiple sheets)
  -o                      : output file for refdb2dat (defaults to stdout)
  -archive cmd            : archive runs specified by selectors to one of disks specified
                            in the [archive-disks] section.

			"-stop-server"
			"-transport"
			"-kill-server"
			"-port"
			"-extract-ods"
			"-pathmod"
			"-env2file"
			"-envcap"
			"-envdelta"
			"-setvars"
			"-set-state-status"
			"-set-run-status"
			"-debug" ;; for *verbosity* > 2
			"-gen-megatest-test"
			"-override-timeout"
			"-test-files"  ;; -test-paths is for listing all

			"-set-values"
			"-load-test-data"
			"-summarize-items"
		        "-gui"
			"-daemonize"
			"-preclean"
			"-rerun-clean"
			"-rerun-all"
			"-clean-cache"

			;; misc
			"-repl"
			"-lock"
			"-unlock"
			"-list-servers"
                        "-run-wait"      ;; wait on a run to complete (i.e. no RUNNING)

			"-logging"
			"-v" ;; verbose 2, more than normal (normal is 1)
			"-q" ;; quiet 0, errors/warnings only
		       )
		 args:arg-hash
		 0))

;; Add args that use remargs here
;;
(if (and (not (null? remargs))
	 (not (or
	       (args:get-arg "-runstep"))
	      ;; add more args that use remargs here
	       (args:get-arg "-runstep")
	       (args:get-arg "-envcap")
	       (args:get-arg "-envdelta")
	       )
	      ))
    (debug:print 0 "ERROR: Unrecognised arguments: " (string-intersperse (if (list? remargs) remargs (argv))  " ")))
    (debug:print-error 0 *default-log-port* "Unrecognised arguments: " (string-intersperse (if (list? remargs) remargs (argv))  " ")))

;; immediately set MT_TARGET if -reqtarg or -target are available
;;
(let ((targ (or (args:get-arg "-reqtarg")(args:get-arg "-target"))))
  (if targ (setenv "MT_TARGET" targ)))

;; The watchdog is to keep an eye on things like db sync etc.

		  (mutex-lock! *db-multi-sync-mutex*)
		  (if (and legacy-sync 
			   (hash-table-ref/default *db-local-sync* run-id #f))
		      ;; (if (> (- start-time last-write) 5) ;; every five seconds
		      (begin ;; let ((sync-time (- (current-seconds) start-time)))
			(db:multi-db-sync (list run-id) 'new2old)
			(let ((sync-time (- (current-seconds) start-time)))
			  (debug:print-info 3 "Sync of newdb to olddb for run-id " run-id " completed in " sync-time " seconds")
			  (debug:print-info 3 *default-log-port* "Sync of newdb to olddb for run-id " run-id " completed in " sync-time " seconds")
			  (if (common:low-noise-print 30 "sync new to old")
			      (debug:print-info 0 "Sync of newdb to olddb for run-id " run-id " completed in " sync-time " seconds")))
			      (debug:print-info 0 *default-log-port* "Sync of newdb to olddb for run-id " run-id " completed in " sync-time " seconds")))
			;; (if (> sync-time 10) ;; took more than ten seconds, start a server for this run
			;;     (begin
			;;       (debug:print-info 0 "Sync is taking a long time, start up a server to assist for run " run-id)
			;;       (debug:print-info 0 *default-log-port* "Sync is taking a long time, start up a server to assist for run " run-id)
			;;       (server:kind-run run-id)))))
			(hash-table-delete! *db-local-sync* run-id)))
		  (mutex-unlock! *db-multi-sync-mutex*))
		(hash-table-keys *db-local-sync*))
	       (if (and debug-mode
			(> (- start-time last-time) 60))
		   (begin
		     (set! last-time start-time)
		     (debug:print-info 4 "timestamp -> " (seconds->time-string (current-seconds)) ", time since start -> " (seconds->hr-min-sec (- (current-seconds) *time-zero*))))))
		     (debug:print-info 4 *default-log-port* "timestamp -> " (seconds->time-string (current-seconds)) ", time since start -> " (seconds->hr-min-sec (- (current-seconds) *time-zero*))))))
	     
	     ;; keep going unless time to exit
	     ;;
	     (if (not *time-to-exit*)
		 (let delay-loop ((count 0))
		   (if (and (not *time-to-exit*)
			    (< count 11)) ;; aprox 5-6 seconds
		       (begin
			 (thread-sleep! 1)
			 (delay-loop (+ count 1))))
		   (loop)))
	     (if (common:low-noise-print 30)
		 (debug:print-info 0 "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*)))))
		 (debug:print-info 0 *default-log-port* "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*)))))
     "Watchdog thread")))

(thread-start! *watchdog*)


(if (args:get-arg "-log")
    (let ((oup (open-output-file (args:get-arg "-log"))))
      (debug:print-info 0 "Sending log output to " (args:get-arg "-log"))
      (current-error-port oup)
      (debug:print-info 0 *default-log-port* "Sending log output to " (args:get-arg "-log"))
      (set! *default-log-port* oup)))
      (current-output-port oup)))

(if (or (args:get-arg "-h")
	(args:get-arg "-help")
	(args:get-arg "--help"))
    (begin
      (print help)
      (exit)))

(if (args:get-arg "-start-dir")
    (if (file-exists? (args:get-arg "-start-dir"))
	(change-directory (args:get-arg "-start-dir"))
	(begin
	  (debug:print 0 "ERROR: non-existant start dir " (args:get-arg "-start-dir") " specified, exiting.")
	  (debug:print-error 0 *default-log-port* "non-existant start dir " (args:get-arg "-start-dir") " specified, exiting.")
	  (exit 1))))

(if (args:get-arg "-version")
    (begin
      (print megatest-version)
      (print (common:version-signature)) ;; (print megatest-version)
      (exit)))

(define *didsomething* #f)

;; Overall exit handling setup immediately
;;
(if (or (args:get-arg "-process-reap"))

(if (args:get-arg "-logging")(set! *logging* #t))

(if (debug:debug-mode 3) ;; we are obviously debugging
    (set! open-run-close open-run-close-no-exception-handling))

(if (args:get-arg "-itempatt")
    (let ((newval (conc (args:get-arg "-testpatt") "/" (args:get-arg "-itempatt"))))
      (debug:print 0 "WARNING: -itempatt has been deprecated, please use -testpatt testpatt/itempatt method, new testpatt is "newval)
      (debug:print 0 *default-log-port* "WARNING: -itempatt has been deprecated, please use -testpatt testpatt/itempatt method, new testpatt is "newval)
      (hash-table-set! args:arg-hash "-testpatt" newval)
      (hash-table-delete! args:arg-hash "-itempatt")))


(if (args:get-arg "-runtests")
    (debug:print 0 *default-log-port* "WARNING: \"-runtests\" is deprecated. Use \"-run\" with \"-testpatt\" instead"))

(on-exit std-exit-procedure)

;;======================================================================
;; Misc general calls
;;======================================================================

;; handle a clean-cache request as early as possible
;;
(if (args:get-arg "-clean-cache")
    (begin
      (set! *didsomething* #t) ;; suppress the help output.
      (if (getenv "MT_TARGET") ;; no point in trying if no target
	  (if (args:get-arg "-runname")
	      (let* ((toppath  (launch:setup))
		     (linktree (if toppath (configf:lookup *configdat* "setup" "linktree")))
		     (runtop   (conc linktree "/" (getenv "MT_TARGET") "/" (args:get-arg "-runname")))
		     (files    (if (file-exists? runtop)
				   (append (glob (conc runtop "/.megatest*"))
					   (glob (conc runtop "/.runconfig*")))
				   '())))
		(if (null? files)
		    (debug:print-info 0 *default-log-port* "No cached megatest or runconfigs files found. None removed.")
		    (begin
		      (debug:print-info 0 *default-log-port* "Removing cached files:\n    " (string-intersperse files "\n    "))
		      (for-each 
		       (lambda (f)
			 (handle-exceptions
			     exn
			     (debug:print 0 *default-log-port* "WARNING: Failed to remove file " f)
			   (delete-file f)))
		       files))))
	      (debug:print-error 0 *default-log-port* "-clean-cache requires -runname."))
	  (debug:print-error 0 *default-log-port* "-clean-cache requires -target or -reqtarg"))))
	    
	  
(if (args:get-arg "-env2file")
    (begin
      (save-environment-as-files (args:get-arg "-env2file"))
      (set! *didsomething* #t)))

(if (args:get-arg "-list-disks")
    (let ((toppath (launch:setup-for-run)))
    (let ((toppath (launch:setup)))
      (print 
       (string-intersperse 
	(map (lambda (x)
	       (string-intersperse 
		x
		" => "))
	     (common:get-disks *configdat*))
	"\n"))
      (set! *didsomething* #t)))

(define (make-sparse-array)
  (let ((a (make-sparse-vector)))
    (sparse-vector-set! a 0 (make-sparse-vector))
    a))

(define (sparse-array? a)
  (and (sparse-vector? a)
       (sparse-vector? (sparse-vector-ref a 0))))

(define (sparse-array-ref a x y)
  (let ((row (sparse-vector-ref a x)))
    (if row
	(sparse-vector-ref row y)
	#f)))

(define (sparse-array-set! a x y val)
  (let ((row (sparse-vector-ref a x)))
    (if row
	(sparse-vector-set! row y val)
	(let ((new-row (make-sparse-vector)))
	  (sparse-vector-set! a x new-row)
	  (sparse-vector-set! new-row y val)))))

(defstruct refdb:csv svec rows cols maxrow maxcol)

;; csv processing record
(define (actual-make-refdb:csv)
  (make-refdb:csv 
   (make-sparse-array)
   (make-hash-table)

			      (not (member out-fmt '("sqlite3" "csv"))))
			 (open-output-file out-file)
			 (current-output-port)))
	   (res-data (configf:read-refdb input-db))
	   (data     (car res-data))
	   (msg      (cadr res-data)))
      (if (not data)
	  (debug:print 0 "Bad input? data=" data) ;; some error occurred
	  (debug:print 0 *default-log-port* "Bad input? data=" data) ;; some error occurred
	  (with-output-to-port out-port
	    (lambda ()
	      (case (string->symbol out-fmt)
		((scheme)(pp data))
		((perl)
		 ;; (print "%hash = (")
		 ;;        key1 => 'value1',

      ))

(if (args:get-arg "-ping")
    (let* ((run-id        (string->number (args:get-arg "-run-id")))
	   (host:port     (args:get-arg "-ping")))
      (server:ping run-id host:port)))

;;======================================================================
;; Capture, save and manipulate environments
;;======================================================================
;;       (set! *did-something* #t)
;; 	      (begin
;; 		(print ((rpc:procedure 'testing (car host-port)(cadr host-port))))
;; 		(case (server:get-transport)

;; NOTE: Keep these above the section where the server or client code is setup

(let ((envcap (args:get-arg "-envcap")))
  (if envcap
      (let* ((db      (env:open-db (if (null? remargs) "envdat.db" (car remargs)))))
	(env:save-env-vars db envcap)
	(env:close-database db)
	(set! *didsomething* #t))))

;; delta "language" will eventually be res=a+b-c but for now it is just res=a-b 
;;
(let ((envdelta (args:get-arg "-envdelta")))
  (if envdelta
      (let ((match (string-split envdelta "-")));; (string-match "([a-z0-9_]+)=([a-z0-9_\\-,]+)" envdelta)))
	(if (not (null? match))
	    (let* ((db        (env:open-db (if (null? remargs) "envdat.db" (car remargs))))
		   ;; (resctx    (cadr match))
		   ;; (equn      (caddr match))
		   (parts     match) ;; (string-split equn "-"))
		   (minuend   (car parts))
		   (subtraend (cadr parts))
		   (added     (env:get-added   db minuend subtraend))
		   (removed   (env:get-removed db minuend subtraend))
		   (changed   (env:get-changed db minuend subtraend)))
	      ;; (pp (hash-table->alist added))
	      ;; (pp (hash-table->alist removed))
	      ;; (pp (hash-table->alist changed))
	      (if (args:get-arg "-o")
		  (with-output-to-file
		      (args:get-arg "-o")
;; 		  ((http)(http:ping run-id host-port))
;; 		  ((rpc) (rpc:procedure 'server:login (car host-port)(cadr host-port));;  *toppath*)) ;; (rpc-transport:ping  run-id (car host-port)(cadr host-port)))
;; 		  (else  (debug:print 0 "ERROR: No transport set")(exit)))))
		    (lambda ()
		      (env:print added removed changed)))
		  (env:print added removed changed))
	      (env:close-database db)
	      (set! *didsomething* #t))
	    (debug:print-error 0 *default-log-port* "Parameter to -envdelta should be new=star-end")))))

;;======================================================================
;; Start the server - can be done in conjunction with -runall or -runtests (one day...)
;;   we start the server if not running else start the client thread
;;======================================================================

(if (args:get-arg "-server")

    ;; Server? Start up here.
    ;;
    (let ((tl        (launch:setup-for-run))
    (let ((tl        (launch:setup))
	  (run-id    (and (args:get-arg "-run-id")
			  (string->number (args:get-arg "-run-id")))))
      (if run-id
	  (begin
	    (server:launch run-id)
	    (set! *didsomething* #t))
	  (debug:print 0 "ERROR: server requires run-id be specified with -run-id")))
	  (debug:print-error 0 *default-log-port* "server requires run-id be specified with -run-id")))

    ;; Not a server? This section will decide how to communicate
    ;;
    ;;  Setup client for all expect listed here
    (if (null? (lset-intersection 
		     equal?
		     (hash-table-keys args:arg-hash)
		     '("-list-servers"
		       "-stop-server"
		       "-show-cmdinfo"
		       "-list-runs"
		       "-ping")))
	(if (launch:setup-for-run)
		equal?
		(hash-table-keys args:arg-hash)
		'("-list-servers"
		  "-stop-server"
		  "-show-cmdinfo"
		  "-list-runs"
		  "-ping")))
	(if (launch:setup)
	    (let ((run-id    (and (args:get-arg "-run-id")
				  (string->number (args:get-arg "-run-id")))))
	      ;; (set! *fdb*   (filedb:open-db (conc *toppath* "/db/paths.db")))
	      ;; if not list or kill then start a client (if appropriate)
	      (if (or (args-defined? "-h" "-version" "-gen-megatest-area" "-gen-megatest-test")
		      (eq? (length (hash-table-keys args:arg-hash)) 0))
		  (debug:print-info 1 "Server connection not needed")
		  (debug:print-info 1 *default-log-port* "Server connection not needed")
		  (begin
		    ;; (if run-id 
		    ;;     (client:launch run-id) 
		    ;;     (client:launch 0)      ;; without run-id we'll start a server for "0"
		    #t
		    ))))))

;; MAY STILL NEED THIS
;;		       (set! *megatest-db* (make-dbr:dbstruct path: *toppath* local: #t))))))))))

(if (or (args:get-arg "-list-servers")
	(args:get-arg "-stop-server"))
    (let ((tl (launch:setup-for-run)))
    (let ((tl (launch:setup)))
      (if tl 
	  (let* ((tdbdat  (tasks:open-db))
		 (servers (tasks:get-all-servers (db:delay-if-busy tdbdat)))
		 (fmtstr  "~5a~12a~8a~20a~24a~10a~10a~10a~10a\n")
		 (servers-to-kill '())
		 (killinfo   (args:get-arg "-stop-server"))
		 (khost-port (if killinfo (if (substring-index ":" killinfo)(string-split ":") #f) #f))

		     (if (> last-update 20)        ;; Mark as dead if not updated in last 20 seconds
			 (tasks:server-deregister (db:delay-if-busy tdbdat) hostname pullport: pullport pid: pid)))
		 (format #t fmtstr id mt-ver pid hostname (conc interface ":" pullport) pubport last-update
			 (if status "alive" "dead") transport)
		 (if (or (equal? id sid)
			 (equal? sid 0)) ;; kill all/any
		     (begin
		       (debug:print-info 0 "Attempting to stop server with pid " pid)
		       (debug:print-info 0 *default-log-port* "Attempting to stop server with pid " pid)
		       (tasks:kill-server status hostname pullport pid transport)))))
	     servers)
	    (debug:print-info 1 "Done with listservers")
	    (debug:print-info 1 *default-log-port* "Done with listservers")
	    (set! *didsomething* #t)
	    (exit)) ;; must do, would have to add checks to many/all calls below
	  (exit))))

;;======================================================================
;; Weird special calls that need to run *after* the server has started?
;;======================================================================

(if (args:get-arg "-list-targets")
    (let ((targets (common:get-runconfig-targets)))
      (debug:print 1 "Found "(length targets) " targets")
      (debug:print 1 *default-log-port* "Found "(length targets) " targets")
      (case (string->symbol (or (args:get-arg "-dumpmode") "alist"))
	((alist)
	 (for-each (lambda (x)
		     ;; (print "[" x "]"))
		     (print x))
		   targets))
	((json)
	 (json-write targets))
	(else
	 (debug:print 0 "ERROR: dump output format " (args:get-arg "-dumpmode") " not supported for -list-targets")))
	 (debug:print-error 0 *default-log-port* "dump output format " (args:get-arg "-dumpmode") " not supported for -list-targets")))
      (set! *didsomething* #t)))

;; cache the runconfigs in $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME/.runconfig
;;
(define (full-runconfigs-read)
;; in the envprocessing branch the below code replaces the further below code
;;  (if (eq? *configstatus* 'fulldata)
;;      *runconfigdat*
;;      (begin
;;	(launch:setup)
;;	*runconfigdat*)))

  (let* ((rundir (if (and (getenv "MT_LINKTREE")(getenv "MT_TARGET")(getenv "MT_RUNNAME"))
		     (conc (getenv "MT_LINKTREE") "/" (getenv "MT_TARGET") "/" (getenv "MT_RUNNAME"))
		     #f))
	 (cfgf   (if rundir (conc rundir "/.runconfig." megatest-version "-" megatest-fossil-hash) #f)))
    (if (and cfgf
	     (file-exists? cfgf)
	     (file-write-access? cfgf))
	(configf:read-alist cfgf)
  (let* ((keys   (rmt:get-keys))
	 (target (common:args-get-target))
	 (key-vals (if target (keys:target->keyval keys target) #f))
	 (sections (if target (list "default" target) #f))
	 (data     (begin
		     (setenv "MT_RUN_AREA_HOME" *toppath*)
		     (if key-vals
			 (for-each (lambda (kt)
				     (setenv (car kt) (cadr kt)))
				   key-vals))
		     (read-config (conc *toppath* "/runconfigs.config") #f #t sections: sections))))
    data))
	(let* ((keys   (rmt:get-keys))
	       (target (common:args-get-target))
	       (key-vals (if target (keys:target->keyval keys target) #f))
	       (sections (if target (list "default" target) #f))
	       (data     (begin
			   (setenv "MT_RUN_AREA_HOME" *toppath*)
			   (if key-vals
			       (for-each (lambda (kt)
					   (setenv (car kt) (cadr kt)))
					 key-vals))
			   (read-config (conc *toppath* "/runconfigs.config") #f #t sections: sections))))
	  (if (and rundir ;; have all needed variabless
		   (directory-exists? rundir)
		   (file-write-access? rundir))
	      (begin
		(configf:write-alist data cfgf)
		;; force re-read of megatest.config - this resolves circular references between megatest.config
		(launch:setup force: #t)
		(launch:cache-config))) ;; we can safely cache megatest.config since we have a valid runconfig
	  data))))


(if (args:get-arg "-show-runconfig")
    (let ((tl (launch:setup-for-run)))
    (let ((tl (launch:setup)))
      (push-directory *toppath*)
      (let ((data (full-runconfigs-read)))
	;; keep this one local
	(cond
	 ((and (args:get-arg "-section")
	       (args:get-arg "-var"))
	  (let ((val (or (configf:lookup data (args:get-arg "-section")(args:get-arg "-var"))
			 (configf:lookup data "default" (args:get-arg "-var")))))
	    (if val (print val))))
	 ((not (args:get-arg "-dumpmode"))
	  (pp (hash-table->alist data)))
	 ((string=? (args:get-arg "-dumpmode") "json")
	  (json-write data))
	 ((string=? (args:get-arg "-dumpmode") "ini")
	  (configf:config->ini data))
	 (else
	  (debug:print 0 "ERROR: -dumpmode of " (args:get-arg "-dumpmode") " not recognised")))
	  (debug:print-error 0 *default-log-port* "-dumpmode of " (args:get-arg "-dumpmode") " not recognised")))
	(set! *didsomething* #t))
      (pop-directory)))

(if (args:get-arg "-show-config")
    (let ((tl   (launch:setup-for-run))
    (let ((tl   (launch:setup))
	  (data *configdat*)) ;; (read-config "megatest.config" #f #t)))
      (push-directory *toppath*)
      ;; keep this one local
      (cond 
       ((and (args:get-arg "-section")
	     (args:get-arg "-var"))
	(let ((val (configf:lookup data (args:get-arg "-section")(args:get-arg "-var"))))
	  (if val (print val))))

       ;; print just a section if only -section

       ((not (args:get-arg "-dumpmode"))
	(pp (hash-table->alist data)))
       ((string=? (args:get-arg "-dumpmode") "json")
	(json-write data))
       ((string=? (args:get-arg "-dumpmode") "ini")
	(configf:config->ini data))
       (else
	(debug:print 0 "ERROR: -dumpmode of " (args:get-arg "-dumpmode") " not recognised")))
	(debug:print-error 0 *default-log-port* "-dumpmode of " (args:get-arg "-dumpmode") " not recognised")))
      (set! *didsomething* #t)
      (pop-directory)))

(if (args:get-arg "-show-cmdinfo")
    (if (or (args:get-arg ":value")(getenv "MT_CMDINFO"))
	(let ((data (common:read-encoded-string (or (args:get-arg ":value")(getenv "MT_CMDINFO")))))
	  (if (equal? (args:get-arg "-dumpmode") "json")
	      (json-write data)
	      (pp data))
	  (set! *didsomething* #t))
	(debug:print-info 0 "environment variable MT_CMDINFO is not set")))
	(debug:print-info 0 *default-log-port* "environment variable MT_CMDINFO is not set")))

;;======================================================================
;; Remove old run(s)
;;======================================================================

;; since several actions can be specified on the command line the removal
;; is done first
(define (operate-on action)
  (let* ((runrec (runs:runrec-make-record))
	 (target (common:args-get-target)))
    (cond
     ((not target)
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify -target or -reqtarg")
      (debug:print-error 0 *default-log-port* "Missing required parameter for " action ", you must specify -target or -reqtarg")
      (exit 1))
     ((not (or (args:get-arg ":runname")
	       (args:get-arg "-runname")))
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify the run name pattern with -runname patt")
      (debug:print-error 0 *default-log-port* "Missing required parameter for " action ", you must specify the run name pattern with -runname patt")
      (exit 2))
     ((not (args:get-arg "-testpatt"))
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify the test pattern with -testpatt")
      (debug:print-error 0 *default-log-port* "Missing required parameter for " action ", you must specify the test pattern with -testpatt")
      (exit 3))
     (else
      (if (not (car *configinfo*))
	  (begin
	    (debug:print 0 "ERROR: Attempted " action "on test(s) but run area config file not found")
	    (debug:print-error 0 *default-log-port* "Attempted " action "on test(s) but run area config file not found")
	    (exit 1))
	  ;; put test parameters into convenient variables
	  (begin
	    ;; check for correct version, exit with message if not correct
	    (common:exit-on-version-changed)
	  (runs:operate-on  action
			    target
			    (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
			    (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
			    state: (common:args-get-state)
			    status: (common:args-get-status)
			    new-state-status: (args:get-arg "-set-state-status")))
	    (runs:operate-on  action
			      target
			      (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
			      (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
			      state: (common:args-get-state)
			      status: (common:args-get-status)
			      new-state-status: (args:get-arg "-set-state-status"))))
      (set! *didsomething* #t)))))
	  

(if (args:get-arg "-remove-runs")
    (general-run-call 
     "-remove-runs"
     "remove runs"
     (lambda (target runname keys keyvals)
       (operate-on 'remove-runs))))

       (let* ((runsdat  (rmt:get-runs-by-patt keys runname 
					(common:args-get-target)
					#f #f #f))
	      (header   (vector-ref runsdat 0))
	      (rows     (vector-ref runsdat 1)))
	 (if (null? rows)
	     (begin
	       (debug:print-info 0 "No matching run found.")
	       (debug:print-info 0 *default-log-port* "No matching run found.")
	       (exit 1))
	     (let* ((row      (car (vector-ref runsdat 1)))
		    (run-id   (db:get-value-by-header row header "id")))
	       (if (args:get-arg "-set-run-status")
		   (rmt:set-run-status run-id (args:get-arg "-set-run-status") msg: (args:get-arg "-m"))
		   (print (rmt:get-run-status run-id))
		   )))))))

;; NOTE: list-runs and list-db-targets operate on local db!!!
;;
;; IDEA: megatest list -runname blah% ...
;;
(if (or (args:get-arg "-list-runs")
	(args:get-arg "-list-db-targets"))
    (if (launch:setup-for-run)
    (if (launch:setup)
	(let* (;; (dbstruct    (make-dbr:dbstruct-wrapper path: *toppath* local: (args:get-arg "-local")))
	       (runpatt     (args:get-arg "-list-runs"))
	       (testpatt    (common:args-get-testpatt #f))
	       ;; (if (args:get-arg "-testpatt") 
	       ;;  	        (args:get-arg "-testpatt") 
	       ;;  	        "%"))
	       (keys        (rmt:get-keys)) ;; (db:get-keys dbstruct))

		    ;; generate the lookup map test-field-name => index-number
		    (let loop ((hed (car adj-tests-spec))
			       (tal (cdr adj-tests-spec))
			       (idx 0))
		      (hash-table-set! test-field-index hed idx)
		      (if (not (null? tal))(loop (car tal)(cdr tal)(+ idx 1))))
		    (begin
		      (debug:print 0 "ERROR: Invalid test fields specified: " (string-intersperse invalid-tests-spec ", "))
		      (debug:print-error 0 *default-log-port* "Invalid test fields specified: " (string-intersperse invalid-tests-spec ", "))
		      (exit)))))

	  ;; Each run
	  (for-each 
	   (lambda (run)
	     (let ((targetstr (string-intersperse (map (lambda (x)
							 (db:get-value-by-header run header x))

			  (statuses (string-split (or (args:get-arg "-status") "") ","))
			  (tests   (if tests-spec
				       (rmt:get-tests-for-run run-id testpatt states statuses #f #f #f 'testname 'asc ;; (db:get-tests-for-run dbstruct run-id testpatt '() '() #f #f #f 'testname 'asc 
							     ;; use qryvals if test-spec provided
							     (if tests-spec
								 (string-intersperse adj-tests-spec ",")
								 ;; db:test-record-fields
								 #f))
								 #f)
							     #f
							     'normal)
				       '())))
		     (case dmode
		       ((json ods)
			(if runs-spec
			    (for-each 
			     (lambda (field-name)
			       (mutils:hierhash-set! data (conc (db:get-value-by-header run header field-name)) targetstr runname "meta" field-name))

			      (newline)))))
		       
		     (for-each 
		      (lambda (test)
		      	(handle-exceptions
			 exn
			 (begin
			   (debug:print 0 "ERROR: Bad data in test record? " test)
			   (debug:print-error 0 *default-log-port* "Bad data in test record? " test)
			   (print "exn=" (condition->list exn))
			   (debug:print 0 " message: " ((condition-property-accessor 'exn 'message) exn))
			   (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
			   (print-call-chain (current-error-port)))
			 (let* ((test-id      (if (member "id"           tests-spec)(get-value-by-fieldname test test-field-index "id"          ) #f)) ;; (db:test-get-id         test))
				(testname     (if (member "testname"     tests-spec)(get-value-by-fieldname test test-field-index "testname"    ) #f)) ;; (db:test-get-testname   test))
				(itempath     (if (member "item_path"    tests-spec)(get-value-by-fieldname test test-field-index "item_path"   ) #f)) ;; (db:test-get-item-path  test))
				(comment      (if (member "comment"      tests-spec)(get-value-by-fieldname test test-field-index "comment"     ) #f)) ;; (db:test-get-comment    test))
				(tstate       (if (member "state"        tests-spec)(get-value-by-fieldname test test-field-index "state"       ) #f)) ;; (db:test-get-state      test))
				(tstatus      (if (member "status"       tests-spec)(get-value-by-fieldname test test-field-index "status"      ) #f)) ;; (db:test-get-status     test))

					    ;; (print "runname: " runname "\n\nrundat: " )(pp rundat)(print "\n\nmetadat: ")(pp metadat)
					    (if metadat
						(map (lambda (field)
						       (let ((tmp (assoc field metadat)))
							 (if tmp (cdr tmp) "")))
						     metadat-fields)
						(begin
						  (debug:print 0 "WARNING: meta data for run " runname " not found")
						  (debug:print 0 *default-log-port* "WARNING: meta data for run " runname " not found")
						  '()))))
					allrundat)))
		 ;; '( ( "target" ( "runname" ( "data" ( "runid" ( "id . "37" ) ( ... ))))
		 (run-pages      (map (lambda (targdat)
					(let* ((target  (car targdat))
					       (runsdat (cdr targdat)))
					  (if runsdat

							     ;; (print "Target: " target "/" runname " tests:")
							     ;; (pp tests)
							     (cons (conc target "/" runname)
								   (cons (list (conc target "/" runname))
									 (cons '()
									       (cons run-fields tests)))))
							   (begin
							     (debug:print 0 "WARNING: run " target "/" runname " appears to have no data")
							     (debug:print 0 *default-log-port* "WARNING: run " target "/" runname " appears to have no data")
							     ;; (pp rundat)
							     '()))))
						   runsdat)
					      '())))
				      newdat)) ;; we use newdat to get target
		 (sheets         (filter (lambda (x)
					   (not (null? x)))
					 (cons runs (map car run-pages)))))
	    ;; (print "allrundat:")
	    ;; (pp allrundat)
	    ;; (print "runs:")
	    ;; (pp runs)
	    ;(print "sheets: ")
	    ;; (pp sheets)
	    (if (eq? dmode 'ods)
		(let* ((tempdir    (conc "/tmp/" (current-user-name) "/" (random 10000) "_" (current-process-id)))
		       (outputfile (or (args:get-arg "-o") "out.ods"))
		       (ouf        (if (string-match (regexp "^[/~]+.*") outputfile) ;; full path?
				       outputfile
				       (begin
					 (debug:print 0 "WARNING: path given, " outputfile " is relative, prefixing with current directory")
					 (debug:print 0 *default-log-port* "WARNING: path given, " outputfile " is relative, prefixing with current directory")
					 (conc (current-directory) "/" outputfile)))))
		  (create-directory tempdir #t)
		  (ods:list->ods tempdir ouf sheets))))
	  ;; (system (conc "rm -rf " tempdir))
	  (set! *didsomething* #t))))

;; Don't think I need this. Incorporated into -list-runs instead
;;
;; (if (and (args:get-arg "-since")
;; 	 (launch:setup-for-run))
;; 	 (launch:setup))
;;     (let* ((since-time (string->number (args:get-arg "-since")))
;; 	   (run-ids    (db:get-changed-run-ids since-time)))
;;       ;; (rmt:get-tests-for-runs-mindata run-ids testpatt states status not-in)
;;       (print (sort run-ids <))
;;       (set! *didsomething* #t)))
      
      

;; if still ok to run tasks
;;   process deferred tasks per above steps

;; run all tests are are Not COMPLETED and PASS or CHECK
(if (or (args:get-arg "-runall")
	(args:get-arg "-run")
	(args:get-arg "-rerun-clean")
	(args:get-arg "-rerun-all")
	(args:get-arg "-runtests"))
    (general-run-call 
     "-runall"
     "run all tests"
     (lambda (target runname keys keyvals)
       (if (args:get-arg "-rerun-clean") ;; first set states/statuses correct
	   (let ((states   (or (configf:lookup *configdat* "validvalues" "cleanrerun-states")

			      new-state-status: "NOT_STARTED,n/a")
	     (runs:operate-on 'set-state-status
			      target
			      (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
			      "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
			      ;; state:  states
			      status: statuses
			      new-state-status: "NOT_STARTED,n/a")))
       ;; RERUN ALL
       (if (args:get-arg "-rerun-all") ;; first set states/statuses correct
	   (begin
	     (hash-table-set! args:arg-hash "-preclean" #t)
	     (runs:operate-on 'set-state-status
			      target
			      (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
			      "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
			      state:  #f
			      ;; status: statuses
			      new-state-status: "NOT_STARTED,n/a")
	     (runs:operate-on 'set-state-status
			      target
			      (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
			      "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
			      ;; state:  states
			      status: #f
			      new-state-status: "NOT_STARTED,n/a")))
       (runs:run-tests target
		       runname
		       #f ;; (common:args-get-testpatt #f)
		       ;; (or (args:get-arg "-testpatt")
		       ;;     "%")
		       user

	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status"))
	       (target    (args:get-arg "-target"))
	       (toppath   (assoc/default 'toppath   cmdinfo)))
	  (change-directory toppath)
	  (if (not target)
	      (begin
		(debug:print 0 "ERROR: -target is required.")
		(debug:print-error 0 *default-log-port* "-target is required.")
		(exit 1)))
	  (if (not (launch:setup-for-run))
	  (if (not (launch:setup))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -test-paths or -test-files, exiting")
		(debug:print 0 *default-log-port* "Failed to setup, giving up on -test-paths or -test-files, exiting")
		(exit 1)))
	  (let* ((keys     (rmt:get-keys))
		 ;; db:test-get-paths must not be run remote
		 (paths    (tests:test-get-paths-matching keys target (args:get-arg "-test-files"))))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(print path))

     "Make ods spreadsheet"
     (lambda (target runname keys keyvals)
       (let ((dbstruct   (make-dbr:dbstruct-wrapper path: *toppath* local: #t))
	     (outputfile (args:get-arg "-extract-ods"))
	     (runspatt   (or (args:get-arg "-runname")(args:get-arg ":runname")))
	     (pathmod    (args:get-arg "-pathmod")))
	     ;; (keyvalalist (keys->alist keys "%")))
	 (debug:print 2 "Extract ods, outputfile: " outputfile " runspatt: " runspatt " keyvals: " keyvals)
	 (debug:print 2 *default-log-port* "Extract ods, outputfile: " outputfile " runspatt: " runspatt " keyvals: " keyvals)
	 (db:extract-ods-file dbstruct outputfile keyvals (if runspatt runspatt "%") pathmod)
	 (db:close-all dbstruct)
	 (set! *didsomething* #t)))))

;;======================================================================
;; execute the test
;;    - gets called on remote host

	  (let ((run-id (string->number (car params)))
		(test-id (string->number (cadr params))))
	    (if (and run-id test-id)
		(begin
		  (launch:recover-test run-id test-id)
		  (set! *didsomething* #t))
		(begin
		  (debug:print 0 "ERROR: bad run-id or test-id, must be integers")
		  (debug:print-error 0 *default-log-port* "bad run-id or test-id, must be integers")
		  (exit 1)))))))

;;======================================================================
;; Test commands (i.e. for use inside tests)
;;======================================================================

(define (megatest:step step state status logfile msg)
  (if (not (getenv "MT_CMDINFO"))
      (begin
	(debug:print 0 "ERROR: MT_CMDINFO env var not set, -step must be called *inside* a megatest invoked environment!")
	(debug:print-error 0 *default-log-port* "MT_CMDINFO env var not set, -step must be called *inside* a megatest invoked environment!")
	(exit 5))
      (let* ((cmdinfo   (common:read-encoded-string (getenv "MT_CMDINFO")))
	     (transport (assoc/default 'transport cmdinfo))
	     (testpath  (assoc/default 'testpath  cmdinfo))
	     (test-name (assoc/default 'test-name cmdinfo))
	     (runscript (assoc/default 'runscript cmdinfo))
	     (db-host   (assoc/default 'db-host   cmdinfo))
	     (run-id    (assoc/default 'run-id    cmdinfo))
	     (test-id   (assoc/default 'test-id   cmdinfo))
	     (itemdat   (assoc/default 'itemdat   cmdinfo))
	     (work-area (assoc/default 'work-area cmdinfo))
	     (db        #f))
	(change-directory testpath)
	(if (not (launch:setup-for-run))
	(if (not (launch:setup))
	    (begin
	      (debug:print 0 "Failed to setup, exiting")
	      (debug:print 0 *default-log-port* "Failed to setup, exiting")
	      (exit 1)))
	(if (and state status)
	    (let ((comment (launch:load-logpro-dat run-id test-id step)))
	      ;; (rmt:test-set-log! run-id test-id (conc stepname ".html"))))
	    (rmt:teststep-set-status! run-id test-id step state status msg logfile)
	      (rmt:teststep-set-status! run-id test-id step state status (or comment msg) logfile))
	    (begin
	      (debug:print 0 "ERROR: You must specify :state and :status with every call to -step")
	      (debug:print-error 0 *default-log-port* "You must specify :state and :status with every call to -step")
	      (exit 6))))))

(if (args:get-arg "-step")
    (begin
      (megatest:step 
       (args:get-arg "-step")
       (or (args:get-arg "-state")(args:get-arg ":state"))

	(args:get-arg "-test-status")
	(args:get-arg "-set-values")
	(args:get-arg "-load-test-data")
	(args:get-arg "-runstep")
	(args:get-arg "-summarize-items"))
    (if (not (getenv "MT_CMDINFO"))
	(begin
	  (debug:print 0 "ERROR: MT_CMDINFO env var not set, commands -test-status, -runstep and -setlog must be called *inside* a megatest environment!")
	  (debug:print-error 0 *default-log-port* "MT_CMDINFO env var not set, commands -test-status, -runstep and -setlog must be called *inside* a megatest environment!")
	  (exit 5))
	(let* ((startingdir (current-directory))
	       (cmdinfo   (common:read-encoded-string (getenv "MT_CMDINFO")))
	       (transport (assoc/default 'transport cmdinfo))
	       (testpath  (assoc/default 'testpath  cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))
	       (db        #f) ;; (open-db))
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status")))
	  (if (not (launch:setup-for-run))
	       (status    (args:get-arg ":status"))
	       (stepname  (args:get-arg "-step")))
	  (if (not (launch:setup))
	      (begin
		(debug:print 0 "Failed to setup, exiting")
		(debug:print 0 *default-log-port* "Failed to setup, exiting")
		(exit 1)))

	  (if (args:get-arg "-runstep")(debug:print-info 1 "Running -runstep, first change to directory " work-area))
	  (if (args:get-arg "-runstep")(debug:print-info 1 *default-log-port* "Running -runstep, first change to directory " work-area))
	  (change-directory work-area)
	  ;; can setup as client for server mode now
	  ;; (client:setup)

	  (if (args:get-arg "-load-test-data")
	      ;; has sub commands that are rdb:
	      ;; DO NOT put this one into either rmt: or open-run-close
	      (tdb:load-test-data run-id test-id))
	  (if (args:get-arg "-setlog")
	      (let ((logfname (args:get-arg "-setlog")))
		(rmt:test-set-log! run-id test-id logfname)))
	  (if (args:get-arg "-set-toplog")
	      ;; DO NOT run remote
	      (tests:test-set-toplog! run-id test-name (args:get-arg "-set-toplog")))
	  (if (args:get-arg "-summarize-items")
	      ;; DO NOT run remote
	      (tests:summarize-items run-id test-id test-name #t)) ;; do force here
	  (if (args:get-arg "-runstep")
	      (if (null? remargs)
		  (begin
		    (debug:print 0 "ERROR: nothing specified to run!")
		    (debug:print-error 0 *default-log-port* "nothing specified to run!")
		    (if db (sqlite3:finalize! db))
		    (exit 6))
		  (let* ((stepname   (args:get-arg "-runstep"))
			 (logprofile (args:get-arg "-logpro"))
			 (logfile    (conc stepname ".log"))
			 (cmd        (if (null? remargs) #f (car remargs)))
			 (params     (if cmd (cdr remargs) '()))

				       (else ">&")))
			 (fullcmd    (conc "(" (string-intersperse 
						(cons cmd params) " ")
					   ") " redir " " logfile)))
		    ;; mark the start of the test
		    (rmt:teststep-set-status! run-id test-id stepname "start" "n/a" (args:get-arg "-m") logfile)
		    ;; run the test step
		    (debug:print-info 2 "Running \"" fullcmd "\" in directory \"" startingdir)
		    (debug:print-info 2 *default-log-port* "Running \"" fullcmd "\" in directory \"" startingdir)
		    (change-directory startingdir)
		    (set! exitstat (system fullcmd))
		    (set! *globalexitstatus* exitstat)
		    ;; (change-directory testpath)
		    ;; run logpro if applicable ;; (process-run "ls" (list "/foo" "2>&1" "blah.log"))
		    (if logprofile
			(let* ((htmllogfile (conc stepname ".html"))
			       (oldexitstat exitstat)
			       (cmd         (string-intersperse (list "logpro" logprofile htmllogfile "<" logfile ">" (conc stepname "_logpro.log")) " ")))
			  (debug:print-info 2 "running \"" cmd "\"")
			  (debug:print-info 2 *default-log-port* "running \"" cmd "\"")
			  (change-directory startingdir)
			  (set! exitstat (system cmd))
			  (set! *globalexitstatus* exitstat) ;; no necessary
			  (change-directory testpath)
			  (rmt:test-set-log! run-id test-id htmllogfile)))
		    (let ((msg (args:get-arg "-m")))
		      (rmt:teststep-set-status! run-id test-id stepname "end" exitstat msg logfile))

						 (hash-table-set! res key (args:get-arg key))))
					   (list ":value" ":tol" ":expected" ":first_err" ":first_warn" ":units" ":category" ":variable"))
				 res)))
		(if (and (args:get-arg "-test-status")
			 (or (not state)
			     (not status)))
		    (begin
		      (debug:print 0 "ERROR: You must specify :state and :status with every call to -test-status\n" help)
		      (debug:print-error 0 *default-log-port* "You must specify :state and :status with every call to -test-status\n" help)
		      (if (sqlite3:database? db)(sqlite3:finalize! db))
		      (exit 6)))
		(let* ((msg    (args:get-arg "-m"))
		       (numoth (length (hash-table-keys otherdata))))
		  ;; Convert to rpc inside the tests:test-set-status! call, not here
		  (tests:test-set-status! run-id test-id state newstatus msg otherdata work-area: work-area))))
	  (if (sqlite3:database? db)(sqlite3:finalize! db))
	  (set! *didsomething* #t))))

;;======================================================================
;; Various helper commands can go below here
;;======================================================================

(if (or (args:get-arg "-showkeys")
        (args:get-arg "-show-keys"))
    (let ((db #f)
	  (keys #f))
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting")
	    (debug:print 0 *default-log-port* "Failed to setup, exiting")
	    (exit 1)))
      (set! keys (rmt:get-keys)) ;;  db))
      (debug:print 1 "Keys: " (string-intersperse keys ", "))
      (debug:print 1 *default-log-port* "Keys: " (string-intersperse keys ", "))
      (if (sqlite3:database? db)(sqlite3:finalize! db))
      (set! *didsomething* #t)))

(if (args:get-arg "-gui")
    (begin
      (debug:print 0 "Look at the dashboard for now")
      (debug:print 0 *default-log-port* "Look at the dashboard for now")
      ;; (megatest-gui)
      (set! *didsomething* #t)))

(if (args:get-arg "-gen-megatest-area")
    (begin
      (genexample:mk-megatest.config)
      (set! *didsomething* #t)))

(if (args:get-arg "-gen-megatest-test")
    (let ((testname (args:get-arg "-gen-megatest-test")))
      (genexample:mk-megatest-test testname)
      (set! *didsomething* #t)))

;;======================================================================
;; Update the database schema, clean up the db
;;======================================================================

(if (args:get-arg "-rebuild-db")
    (begin
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (debug:print 0 *default-log-port* "Failed to setup, exiting") 
	    (exit 1)))
      ;; keep this one local
      (open-run-close patch-db #f)
      (set! *didsomething* #t)))

(if (args:get-arg "-cleanup-db")
    (begin
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (debug:print 0 *default-log-port* "Failed to setup, exiting") 
	    (exit 1)))
      ;; keep this one local
      ;; (open-run-close db:clean-up #f)
      (common:cleanup-db)
      (db:multi-db-sync 
       #f ;; do all run-ids
       ;; 'new2old
       'killservers
       'dejunk
       ;; 'adj-testids
       ;; 'old2new
       'new2old
       )
      (set! *didsomething* #t)))

(if (args:get-arg "-mark-incompletes")
    (begin
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") b
	    (debug:print 0 *default-log-port* "Failed to setup, exiting")
	    (exit 1)))
      (open-run-close db:find-and-mark-incomplete #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Update the tests meta data from the testconfig files
;;======================================================================

(if (args:get-arg "-update-meta")
    (begin
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (debug:print 0 *default-log-port* "Failed to setup, exiting") 
	    (exit 1)))
      ;; now can find our db
      ;; keep this one local
      (open-run-close runs:update-all-test_meta #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Start a repl
;;======================================================================

;; fakeout readline

(if (or (getenv "MT_RUNSCRIPT")
(if (or (args:get-arg "-repl")
	(args:get-arg "-repl")
	(args:get-arg "-load"))
    (let* ((toppath (launch:setup-for-run))
    (let* ((toppath (launch:setup))
	   (dbstruct (if toppath (make-dbr:dbstruct-wrapper path: toppath local: (args:get-arg "-local")) #f)))
      (if dbstruct
	  (cond
	   ((getenv "MT_RUNSCRIPT")
	    ;; How to run megatest scripts
	    ;;
	    ;; #!/bin/bash
	    ;;
	    ;; export MT_RUNSCRIPT=yes
	    ;; megatest << EOF
	    ;; (print "Hello world")
	    ;; (exit)
	    ;; EOF

	    (repl))
	   (else
	  (begin
	    (set! *db* dbstruct)
	    (set! *client-non-blocking-mode* #t)
	    (import extras) ;; might not be needed
	    ;; (import csi)
	    (import readline)
	    (import apropos)
	    ;; (import (prefix sqlite3 sqlite3:)) ;; doesn't work ...
	    (include "readline-fix.scm")
	    (gnu-history-install-file-manager
	     (string-append
	      (or (get-environment-variable "HOME") ".") "/.megatest_history"))
	    (current-input-port (make-gnu-readline-port "megatest> "))
	    (if (args:get-arg "-repl")
		(repl)
		(load (args:get-arg "-load")))
	    (db:close-all dbstruct))
	  (exit))
      (set! *didsomething* #t)))
	    (begin
	      (set! *db* dbstruct)
	      (set! *client-non-blocking-mode* #t)
	      (import extras) ;; might not be needed
	      ;; (import csi)
	      (import readline)
	      (import apropos)
	      ;; (import (prefix sqlite3 sqlite3:)) ;; doesn't work ...
	      (include "readline-fix.scm")
	      (if *use-new-readline*
		  (begin
		    (install-history-file (get-environment-variable "HOME") ".megatest_history") ;;  [homedir] [filename] [nlines])
		    (current-input-port (make-readline-port "megatest> ")))
		  (begin
		    (gnu-history-install-file-manager
		     (string-append
		      (or (get-environment-variable "HOME") ".") "/.megatest_history"))
		    (current-input-port (make-gnu-readline-port "megatest> "))))
	      (if (args:get-arg "-repl")
		  (repl)
		  (load (args:get-arg "-load")))
	      (db:close-all dbstruct))
	    (exit)))
	  (set! *didsomething* #t))))

;;======================================================================
;; Wait on a run to complete
;;======================================================================

(if (and (args:get-arg "-run-wait")
	 (not (or (args:get-arg "-run")
		  (args:get-arg "-runtests")))) ;; run-wait is built into runtests now
    (begin
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (debug:print 0 *default-log-port* "Failed to setup, exiting") 
	    (exit 1)))
      (operate-on 'run-wait)
      (set! *didsomething* #t)))

;; ;; ;; redo me ;; Not converted to use dbstruct yet
;; ;; ;; redo me ;;
;; ;; ;; redo me (if (args:get-arg "-convert-to-norm")
;; ;; ;; redo me     (let* ((toppath (setup-for-run))
;; ;; ;; redo me 	   (dbstruct (if toppath (make-dbr:dbstruct path: toppath local: #t))))
;; ;; ;; redo me       (for-each 
;; ;; ;; redo me        (lambda (field)
;; ;; ;; redo me 	 (let ((dat '()))
;; ;; ;; redo me 	   (debug:print-info 0 "Getting data for field " field)
;; ;; ;; redo me 	   (debug:print-info 0 *default-log-port* "Getting data for field " field)
;; ;; ;; redo me 	   (sqlite3:for-each-row
;; ;; ;; redo me 	    (lambda (id val)
;; ;; ;; redo me 	      (set! dat (cons (list id val) dat)))
;; ;; ;; redo me 	    (db:get-db db run-id)
;; ;; ;; redo me 	    (conc "SELECT id," field " FROM tests;"))
;; ;; ;; redo me 	   (debug:print-info 0 "found " (length dat) " items for field " field)
;; ;; ;; redo me 	   (debug:print-info 0 *default-log-port* "found " (length dat) " items for field " field)
;; ;; ;; redo me 	   (let ((qry (sqlite3:prepare db (conc "UPDATE tests SET " field "=? WHERE id=?;"))))
;; ;; ;; redo me 	     (for-each
;; ;; ;; redo me 	      (lambda (item)
;; ;; ;; redo me 		(let ((newval ;; (sdb:qry 'getid 
;; ;; ;; redo me 		       (cadr item))) ;; )
;; ;; ;; redo me 		  (if (not (equal? newval (cadr item)))
;; ;; ;; redo me 		      (debug:print-info 0 "Converting " (cadr item) " to " newval " for test #" (car item)))
;; ;; ;; redo me 		      (debug:print-info 0 *default-log-port* "Converting " (cadr item) " to " newval " for test #" (car item)))
;; ;; ;; redo me 		  (sqlite3:execute qry newval (car item))))
;; ;; ;; redo me 	      dat)
;; ;; ;; redo me 	     (sqlite3:finalize! qry))))
;; ;; ;; redo me        (db:close-all dbstruct)
;; ;; ;; redo me        (list "uname" "rundir" "final_logf" "comment"))
;; ;; ;; redo me       (set! *didsomething* #t)))

;;======================================================================
;; Exit and clean up
;;======================================================================

(if *runremote* (close-all-connections!))

(if (not *didsomething*)
    (debug:print 0 help))
    (debug:print 0 *default-log-port* help))

(set! *time-to-exit* #t)
(thread-join! *watchdog*)

(if (not (eq? *globalexitstatus* 0))
    (if (or (args:get-arg "-run")(args:get-arg "-runtests")(args:get-arg "-runall"))
        (begin
           (debug:print 0 "NOTE: Subprocesses with non-zero exit code detected: " *globalexitstatus*)
           (debug:print 0 *default-log-port* "NOTE: Subprocesses with non-zero exit code detected: " *globalexitstatus*)
           (exit 0))
        (case *globalexitstatus*
         ((0)(exit 0))
         ((1)(exit 1))
         ((2)(exit 2))
         (else (exit 3)))))