Megatest

;;======================================================================
;; Database access
;;======================================================================

;; dbstruct vector containing all the relevant dbs like main.db, megatest.db, run.db etc

(use (srfi 18) extras tcp stack)
(use sqlite3 srfi-1 posix regex regex-case srfi-69 csv-xml s11n md5 message-digest base64 format dot-locking z3 typed-records matchable)
(import (prefix sqlite3 sqlite3:))
(import (prefix base64 base64:))
(use (srfi 18)
     extras
     tcp
     stack
     (prefix sqlite3 sqlite3:)
     srfi-1
     posix
     regex
     regex-case
     srfi-69
     csv-xml
     s11n
     md5
     message-digest
     (prefix base64 base64:)
     format
     dot-locking
     z3
     typed-records
     matchable)

(declare (unit db))
(declare (uses common))
(declare (uses dbmod))
;; (declare (uses debugprint))
(declare (uses dbfile))
(declare (uses keys))
(declare (uses ods))
(declare (uses client))
(declare (uses mt))

(include "common_records.scm")
(include "db_records.scm")
(include "key_records.scm")
(include "run_records.scm")

(define *number-of-writes* 0)
(define *number-non-write-queries* 0)

;;======================================================================
;;  R E C O R D S
;;======================================================================

(import dbmod)
;; each db entry is a pair ( db . dbfilepath )
;; I propose this record evolves into the area record
;;
(defstruct dbr:dbstruct 
  (tmpdb       #f)
  (dbstack     #f) ;; stack for tmp db handles, do not initialize with a stack
  (mtdb        #f)
  (refndb      #f)
  (homehost    #f) ;; not used yet
  (on-homehost #f) ;; not used yet
  (read-only   #f)
  (stmt-cache  (make-hash-table))
  )                ;; goal is to converge on one struct for an area but for now it is too confusing
  
(import dbfile)

;; record for keeping state,status and count for doing roll-ups in
;; iterated tests
;;
(defstruct dbr:counts
  (state #f)
  (status #f)
  (count  0)) 

;;======================================================================
;; alist-of-alists
;;======================================================================
;; 
;; (define (db:aa-set! dat key1 key2 val)
;;   (let loop ((

;;======================================================================
;; hash of hashs
;;======================================================================


(define (db:hoh-set! dat key1 key2 val)
  (let* ((subhash (hash-table-ref/default dat key1 #f)))
    (if subhash
	(hash-table-set! subhash key2 val)
	(begin
	  (hash-table-set! dat key1 (make-hash-table))
	  (db:hoh-set! dat key1 key2 val)))))

(define (db:hoh-get dat key1 key2)
  (let* ((subhash (hash-table-ref/default dat key1 #f)))
    (and subhash
	 (hash-table-ref/default subhash key2 #f))))

(define (db:get-cache-stmth dbstruct db stmt)
  (let* ((stmt-cache        (dbr:dbstruct-stmt-cache dbstruct))
	 (stmth             (db:hoh-get stmt-cache db stmt)))
(define (db:get-cache-stmth dbdat run-id db stmt)
  (let* (;; (dbdat       (dbfile:get-dbdat dbstruct run-id))
	 (stmt-cache  (dbr:dbdat-stmt-cache dbdat))
	 (stmth       (db:hoh-get stmt-cache db stmt)))
    (or stmth
	(let* ((newstmth (sqlite3:prepare db stmt)))
	  (db:hoh-set! stmt-cache db stmt newstmth)
	  newstmth))))

;;======================================================================
;; SQLITE3 HELPERS

     (if (eq? err-status 'done)
	 default
	 (begin
	   (debug:print-error 0 *default-log-port* " query " stmt " failed, params: " params ", error: " ((condition-property-accessor 'exn 'message) exn) ", exn=" exn)
	   (print-call-chain (current-error-port))
	   default)))
   (apply sqlite3:first-result db stmt params)))

(define (db:generic-error-printout exn . message)
  (print-call-chain (current-error-port))
  (apply debug:print-error 0 *default-log-port* message)
  (debug:print-error 0 *default-log-port* ;; "   params: " params
		     ", error: "     ((condition-property-accessor 'exn 'message)   exn)
		     ", arguments: " ((condition-property-accessor 'exn 'arguments) exn)
		     ", location: "  ((condition-property-accessor 'exn 'location)  exn)
		     ))

(define (db:setup do-sync)
  (assert *toppath* "FATAL: db:setup called before launch:setup has been run.")
  (let* ((tmpdir (common:get-db-tmp-area)))
    (dbfile:setup do-sync *toppath* tmpdir)))

;; looks up subdb and returns it, if not found then set up
;; and then return it.
;;
#;(define (db:get-db dbstruct run-id)
  (let* ((res (dbfile:get-subdb dbstruct run-id)))
    (if res
	res
	(let* ((newsubdb (make-dbr:subdb)))
	  (dbfile:set-subdb dbstruct run-id newsubdb)
	  (db:open-db dbstruct run-id areapath: (dbr:dbstruct-areapath dbstruct) do-sync: #t)
	  newsubdb))))

;; Get/open a database
;;    if run-id => get run specific db
;;    if #f     => get main db
;;    if run-id is a string treat it as a filename
;;    if db already open - return inmem
;;    if db not open, open inmem, rundb and sync then return inmem
;;    inuse gets set automatically for rundb's
;;
;; (define db:get-db db:get-subdb)

(define (db:get-db dbstruct) ;;  run-id) 
  (if (stack? (dbr:dbstruct-dbstack dbstruct))
      (if (stack-empty? (dbr:dbstruct-dbstack dbstruct))
          (let ((newdb (db:open-megatest-db path: (db:dbfile-path))))
            ;; (stack-push! (dbr:dbstruct-dbstack dbstruct) newdb)
            newdb)
          (stack-pop! (dbr:dbstruct-dbstack dbstruct)))
      (db:open-db dbstruct)))
;; (define (db:get-db subdb #;dbstruct run-id) ;; RENAME TO db:get-dbh
;;   ;; (let* ((subdb (dbfile:get-subdb dbstruct run-id)))
;;     (if (stack? (dbr:subdb-dbstack subdb))
;; 	(if (stack-empty? (dbr:subdb-dbstack subdb))
;; 	    (let* ((dbname (db:run-id->dbname run-id))
;; 		   (newdb  (db:open-megatest-db path: (db:dbfile-path)
;; 						name: dbname)))
;; 	      ;; NOTE: pushing on the stack only happens AFTER the handle has been used
;; 	      ;; (stack-push! (dbr:dbstruct-dbstack dbstruct) newdb)
;; 	      newdb)
;;           (stack-pop! (dbr:subdb-dbstack subdb)))
;; 	(db:open-db subdb run-id))) ;; )

;; ;; legacy handling of structure for managing db's. Refactor this into dbr:?
(define (db:dbdat-get-db dbdat)
  (if (pair? dbdat)
      (car dbdat)
      dbdat))


(define (db:get-db dbstruct run-id) 
   (let* ((subdb (dbfile:get-subdb dbstruct run-id))
        (dbdat (dbfile:get-dbdat dbstruct run-id)))
        (if (dbr:dbdat? dbdat)
          dbdat
          (dbfile:open-db *dbstruct-dbs* #f db:initialize-main-db)
        )
(define (db:dbdat-get-path dbdat)
  (if (pair? dbdat)
      (cdr dbdat)
      #f))
   )
)

(define-inline (db:generic-error-printout exn . message)
  (print-call-chain (current-error-port))
  (apply debug:print-error 0 *default-log-port* message)
  (debug:print-error 0 *default-log-port* "   params: " params
		     ", error: "     ((condition-property-accessor 'exn 'message)   exn)
		     ", arguments: " ((condition-property-accessor 'exn 'arguments) exn)
		     ", location: "  ((condition-property-accessor 'exn 'location)  exn)
		     ))

(define (db:open-db dbstruct run-id)
  (let* ((dbdat (dbfile:open-db dbstruct run-id db:initialize-main-db)))
    (set! *db-write-access* (not (dbr:dbdat-read-only dbdat)))
    dbdat))

;; (db:with-db dbstruct run-id sqlite3:exec "select blah fgrom blaz;")
;; r/w is a flag to indicate if the db is modified by this query #t = yes, #f = no
;;
(define (db:with-db dbstruct run-id r/w proc . params)
  (let* ((have-struct (dbr:dbstruct? dbstruct))
         (dbdat     (if have-struct 
			(db:get-db dbstruct)
         (dbdat     (if have-struct                ;; this stuff just allows us to call with a db handle directly
			(db:open-db dbstruct run-id) ;; (dbfile:get-subdb dbstruct run-id)
			#f))
	 (db        (if have-struct
			(db:dbdat-get-db dbdat)
	 (db        (if have-struct                ;; this stuff just allows us to call with a db handle directly
			(dbr:dbdat-dbh dbdat)
			dbstruct))
	 (fname     (db:dbdat-get-path dbdat))
	 (fname     (if dbdat
			(dbr:dbdat-dbfile dbdat)
			"nofilenameavailable"))
	 (subdb     (if have-struct
			(dbfile:get-subdb dbstruct run-id)
			#f))
	 (use-mutex (> *api-process-request-count* 25))) ;; was 25
    (if (and use-mutex
	     (common:low-noise-print 120 "over-50-parallel-api-requests"))
	(debug:print-info 0 *default-log-port* *api-process-request-count* " parallel api requests being processed in process " (current-process-id) ", throttling access"))
    (if (common:low-noise-print 600 (conc "parallel-api-requests" *max-api-process-requests*))
	(debug:print-info 2 *default-log-port* "Parallel api request count: " *api-process-request-count* " max parallel requests: " *max-api-process-requests*))
    (condition-case
     (begin
       (if use-mutex (mutex-lock! *db-with-db-mutex*))
       (let ((res (apply proc db params)))
	 (if use-mutex (mutex-unlock! *db-with-db-mutex*))
	 ;; (if (vector? dbstruct)(db:done-with dbstruct run-id r/w))
	 (if dbdat (stack-push! (dbr:dbstruct-dbstack dbstruct) dbdat))
	 res))
     (exn (io-error)
	  (db:generic-error-printout exn "ERROR: i/o error with " fname ". Check permissions, disk space etc. and try again."))
     (exn (corrupt)
	  (db:generic-error-printout exn "ERROR: database " fname " is corrupt. Repair it to proceed."))
     (exn (busy)
	  (db:generic-error-printout exn "ERROR: database " fname
				     " is locked. Try copying to another location, remove original and copy back."))
     (exn (permission)(db:generic-error-printout exn "ERROR: database " fname " has some permissions problem."))
     (exn ()
	  (db:generic-error-printout exn "ERROR: Unknown error with database " fname " message: "
		       ((condition-property-accessor 'exn 'message) exn))))))
	(begin
	  (if use-mutex (mutex-lock! *db-with-db-mutex*))
	  (let ((res (apply proc dbdat db params)))
	    (if use-mutex (mutex-unlock! *db-with-db-mutex*))
	    ;; (if (vector? dbstruct)(db:done-with dbstruct run-id r/w))
	    (if dbdat (stack-push! (dbr:subdb-dbstack subdb) dbdat))
	    res))
      (exn (io-error)
	   (db:generic-error-printout exn "ERROR: i/o error with " fname ". Check permissions, disk space etc. and try again."))
      (exn (corrupt)
	   (db:generic-error-printout exn "ERROR: database " fname " is corrupt. Repair it to proceed."))
      (exn (busy)
	   (db:generic-error-printout exn "ERROR: database " fname
				      " is locked. Try copying to another location, remove original and copy back."))
      (exn (permission)(db:generic-error-printout exn "ERROR: database " fname " has some permissions problem."))
      (exn ()
	   (db:generic-error-printout exn "ERROR: Unknown error with database " fname " message: "
				      ((condition-property-accessor 'exn 'message) exn))))))
      
;;======================================================================
;; K E E P   F I L E D B   I N   dbstruct
;;======================================================================

;; (define (db:get-filedb dbstruct run-id)
;;   (let ((db (vector-ref dbstruct 2)))
;;     (if db
;; 	db
;; 	(let ((fdb (filedb:open-db (conc *toplevel* "/db/files.db"))))
;; 	  (vector-set! dbstruct 2 fdb)
;; 	  fdb))))
;; 
;; ;; Can also be used to save arbitrary strings
;; ;;
;; (define (db:save-path dbstruct path)
;;   (let ((fdb (db:get-filedb dbstruct)))b
;;     (filedb:register-path fdb path)))
;; 
;; ;; Use to get a path. To get an arbitrary string see next define
;; ;;
;; (define (db:get-path dbstruct id)
;;   (let ((fdb (db:get-filedb dbstruct)))
;;     (filedb:get-path db id)))

;; NB// #f => return dbdir only
;;      (was planned to be;  zeroth db with name=main.db)
;; 
;; If run-id is #f return to create and retrieve the path where the db will live.
;;
(define db:dbfile-path common:get-db-tmp-area)

(define (db:set-sync db)
  (let ((syncprag (configf:lookup *configdat* "setup" "sychronous")))
    (sqlite3:execute db (conc "PRAGMA synchronous = " (or syncprag 0) ";")))) 

;; open an sql database inside a file lock
;; returns: db existed-prior-to-opening
;; RA => Returns a db handler; sets the lock if opened in writable mode
;;
;; (define *db-open-mutex* (make-mutex))

(define (db:lock-create-open fname initproc)
;;
#;(define (db:lock-create-open fname initproc)
  (let* ((parent-dir   (or (pathname-directory fname)(current-directory))) ;; no parent? go local
         (raw-fname    (pathname-file fname))
	 (dir-writable (file-write-access? parent-dir))
	 (file-exists  (common:file-exists? fname))
	 (file-write   (if file-exists
			   (file-write-access? fname)
			   dir-writable )))

         (exn (io-error)  (debug:print 0 *default-log-port* "ERROR: i/o error with " fname ". Check permissions, disk space etc. and try again."))
         (exn (corrupt)   (debug:print 0 *default-log-port* "ERROR: database " fname " is corrupt. Repair it to proceed."))
         (exn (busy)      (debug:print 0 *default-log-port* "ERROR: database " fname " is locked. Try copying to another location, remove original and copy back."))
         (exn (permission)(debug:print 0 *default-log-port* "ERROR: database " fname " has some permissions problem."))
         (exn () (debug:print 0 *default-log-port* "ERROR: Unknown error with database " fname " message: " ((condition-property-accessor 'exn 'message) exn))))
	)))


;; This routine creates the db if not already present. It is only called if the db is not already opened
;;
(define (db:open-db dbstruct #!key (areapath #f)(do-sync #t)) ;; TODO: actually use areapath
  (let ((tmpdb-stack (dbr:dbstruct-dbstack dbstruct))) ;; RA => Returns the first reference in dbstruct
#;(define (db:open-db dbstruct run-id #!key (areapath #f)(do-sync #t))
  (let* ((subdb       (dbfile:get-subdb dbstruct run-id))
	 (tmpdb-stack (dbr:subdb-dbstack subdb))) 
    (if (stack? tmpdb-stack)
	(db:get-db tmpdb-stack) ;; get previously opened db (will create new db handle if all in the stack are already used
	(db:get-subdb tmpdb-stack run-id) ;; get previously opened db (will create new db handle if all in the stack are already used
        (let* ((max-stale-tmp (configf:lookup-number *configdat* "server" "filling-db-max-stale-seconds" default: 10))
               (dbpath       (db:dbfile-path ))      ;; path to tmp db area
               (dbpath       (db:dbfile-path))      ;; path to tmp db area
	       (dbname       (db:run-id->dbname run-id))
               (dbexists     (common:file-exists? dbpath))
	       (tmpdbfname   (conc dbpath "/megatest.db"))
	       (mtdbfname    (conc *toppath* "/"dbname))
	       (dbfexists    (common:file-exists? tmpdbfname))  ;; (conc dbpath "/megatest.db")))
               (mtdbexists   (common:file-exists? (conc *toppath* "/megatest.db")))
               (mtdbexists   (common:file-exists? mtdbfname))
							 
               (mtdbmodtime  (if mtdbexists (common:lazy-sqlite-db-modification-time (conc *toppath* "/megatest.db"))   #f))
               (mtdbmodtime  (if mtdbexists (common:lazy-sqlite-db-modification-time mtdbfname)  #f))
	        		 (tmpdbmodtime (if dbfexists  (common:lazy-sqlite-db-modification-time tmpdbfname) #f)) 
               (mtdb         (db:open-megatest-db))
               (mtdbpath     (db:dbdat-get-path mtdb))
               (tmpdb        (db:open-megatest-db path: dbpath)) ;; lock-create-open dbpath db:initialize-main-db))
               (refndb       (db:open-megatest-db path: dbpath name: "megatest_ref.db"))
               (write-access (file-write-access? mtdbpath))
	       ;(mtdbmodtime  (if mtdbexists (common:lazy-sqlite-db-modification-time mtdbpath)   #f)) ; moving this before db:open-megatest-db is called. if wal mode is on -WAL and -shm file get created with causing the  tmpdbmodtime timestamp always greater than mtdbmodtime
	       ;(tmpdbmodtime (if dbfexists  (common:lazy-sqlite-db-modification-time tmpdbfname) #f)) 
					;if wal mode is on -WAL and -shm file get created when db:open-megatest-db is called. modtimedelta will always be < 10 so db in tmp not get synced
          ;(tmpdbmodtime (if dbfexists (db:get-last-update-time (car tmpdb)) #f))    
          ;(fmt (file-modification-time tmpdbfname))
               (mtdb         (db:open-megatest-db mtdbfname))
	       ;; the reference db for syncing
	       (refdbfname   (conc dbpath "/"dbname"_ref"))
               (refndb       (db:open-megatest-db refdbfname))
               ;; (mtdbpath     (dbr:dbdat-dbfile mtdb))
	       ;; the tmpdb
	       (tmpdbfname   (conc dbpath"/"dbname)) ;; /tmp/<stuff>/.db/[main|1,2...].db 
               (tmpdb        (db:open-megatest-db tmpdbfname)) ;; lock-create-open dbpath db:initialize-main-db))
	       (dbfexists    (common:file-exists? tmpdbfname))  ;; (conc dbpath "/megatest.db")))
	       (tmpdbmodtime (if dbfexists  (common:lazy-sqlite-db-modification-time tmpdbfname) #f))

               (write-access (file-write-access? mtdbfname))
	       
	       ;; (mtdbmodtime (if mtdbexists
	       ;; (common:lazy-sqlite-db-modification-time mtdbpath)
	       ;; #f)) ; moving this before db:open-megatest-db is
	       ;; called. if wal mode is on -WAL and -shm file get
	       ;; created with causing the tmpdbmodtime timestamp
	       ;; always greater than mtdbmodtime (tmpdbmodtime (if
	       ;; dbfexists (common:lazy-sqlite-db-modification-time
	       ;; tmpdbfname) #f)) if wal mode is on -WAL and -shm
	       ;; file get created when db:open-megatest-db is
	       ;; called. modtimedelta will always be < 10 so db in
	       ;; tmp not get synced (tmpdbmodtime (if dbfexists
	       ;; (db:get-last-update-time (car tmpdb)) #f)) (fmt
	       ;; (file-modification-time tmpdbfname))
	       
	       (modtimedelta (and mtdbmodtime tmpdbmodtime (- mtdbmodtime tmpdbmodtime))))

          (when write-access
            (sqlite3:execute (car mtdb) "drop trigger if exists update_tests_trigger")
            (sqlite3:execute (car mtdb) "drop trigger if exists update_runs_trigger"))
            (sqlite3:execute (dbr:dbdat-dbh mtdb) "drop trigger if exists update_tests_trigger")
            (sqlite3:execute (dbr:dbdat-dbh mtdb) "drop trigger if exists update_runs_trigger"))
          
         ;(print "mtdbmodtime " mtdbmodtime " tmpdbmodtime " tmpdbmodtime " mtdbpath " mtdbpath " " (conc *toppath* "/megatest.db"))
	        ;;(debug:print-info 13 *default-log-port* "db:open-db>> mtdbpath="mtdbpath" mtdbexists="mtdbexists" and write-access="write-access)
	  ;; (print "mtdbmodtime " mtdbmodtime " tmpdbmodtime " tmpdbmodtime " mtdbpath " mtdbpath " " (conc *toppath* "/megatest.db"))
	  ;; (debug:print-info 13 *default-log-port* "db:open-db>> mtdbpath="mtdbpath" mtdbexists="mtdbexists" and write-access="write-access)
          (if (and dbexists (not write-access))
              (begin
                (set! *db-write-access* #f)
                (dbr:dbstruct-read-only-set! dbstruct #t)))
          (dbr:dbstruct-mtdb-set!   dbstruct mtdb)
          (dbr:dbstruct-tmpdb-set!  dbstruct tmpdb)
          (dbr:dbstruct-dbstack-set! dbstruct (make-stack)) ;; BB: why a stack?  Why would the number of db's be indeterminate?  Is this a legacy of 1.db 2.db .. ?
          (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb) ;; olddb is already a (cons db path)
          (dbr:dbstruct-refndb-set! dbstruct refndb)
                (dbr:subdb-read-only-set! subdb #t)))
          (dbr:subdb-mtdb-set!   subdb mtdb)
          (dbr:subdb-tmpdb-set!  subdb tmpdb)
          (dbr:subdb-dbstack-set! subdb (make-stack)) ;; BB: why a stack?  Why would the number of db's be indeterminate?  Is this a legacy of 1.db 2.db .. ?
          (stack-push! (dbr:subdb-dbstack subdb) tmpdb) ;; olddb is already a (cons db path)
          (dbr:subdb-refndb-set! subdb refndb)
          (if (and  (or (not dbfexists)
			(and modtimedelta
			     (> modtimedelta max-stale-tmp))) ;; if db in tmp is over ten seconds older than the file in MTRA then do a sync back
		    do-sync)
	      (begin
		(debug:print 1 *default-log-port* "filling db " (db:dbdat-get-path tmpdb) " with data \n    from " (db:dbdat-get-path mtdb) " mod time delta: " modtimedelta)
		(db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb refndb tmpdb)
    ;touch tmp db to avoid wal mode wierdness  
     (set! (file-modification-time tmpdbfname) (current-seconds))  
		(debug:print 1 *default-log-port* "filling db " (dbr:dbdat-dbfile tmpdb) " with data \n    from " (dbr:dbdat-dbfile mtdb) " mod time delta: " modtimedelta)
		(db:sync-tables (db:sync-all-tables-list subdb) #f mtdb refndb tmpdb)
		;; touch tmp db to avoid wal mode wierdness  
		(set! (file-modification-time tmpdbfname) (current-seconds))  
                (debug:print-info 13 *default-log-port* "db:sync-all-tables-list done.")
                )
	      (debug:print 4 *default-log-port* " db, " (db:dbdat-get-path tmpdb) " already exists or fresh enough, not propogating data from\n     " (db:dbdat-get-path mtdb) " mod time delta: " modtimedelta) )
	  ;; (db:multi-db-sync dbstruct 'old2new))  ;; migrate data from megatest.db automatically
	      (debug:print 4 *default-log-port* " db, " (dbr:dbdat-dbfile tmpdb) " already exists or fresh enough, not propogating data from\n     " (dbr:dbdat-dbfile mtdb) " mod time delta: " modtimedelta) )
	  ;; (db:multi-db-sync subdb 'old2new))  ;; migrate data from megatest.db automatically
          tmpdb))))


(define (db:get-last-update-time db)
;	(db:with-db
;   dbstruct #f #f 
;    (lambda (db)
			(let ((last-update-time #f))
      	(sqlite3:for-each-row 
          (lambda (lup) 
             (set! last-update-time lup))     
          db    
					"select max(lup) from ( select max(last_update) as lup  from tests union select max(last_update) as lup from runs);")
        last-update-time))
  (let ((last-update-time #f))
    (sqlite3:for-each-row 
     (lambda (lup) 
       (set! last-update-time lup))     
     db    
     "select max(lup) from ( select max(last_update) as lup  from tests union select max(last_update) as lup from runs);")
    last-update-time))
;))

;; Make the dbstruct, setup up auxillary db's and call for main db at least once
;;
;; called in http-transport and replicated in rmt.scm for *local* access. 
;;
(define (db:setup do-sync #!key (areapath #f))
  ;;
  (cond
   (*dbstruct-db* *dbstruct-db*);; TODO: when multiple areas are supported, this optimization will be a hazard
   (else ;;(common:on-homehost?)
    (debug:print-info 13 *default-log-port* "db:setup entered (first time, not cached.)")
    (let* ((dbstruct (make-dbr:dbstruct)))
      (when (not *toppath*)
        (debug:print-info 13 *default-log-port* "in db:setup, *toppath* not set; calling launch:setup")
        (launch:setup areapath: areapath))
      (debug:print-info 13 *default-log-port* "Begin db:open-db")
      (db:open-db dbstruct areapath: areapath do-sync: do-sync)
      (debug:print-info 13 *default-log-port* "Done db:open-db")
      (set! *dbstruct-db* dbstruct)
      ;;(debug:print-info 13 *default-log-port* "new dbstruct = "(dbr:dbstruct->alist dbstruct))
      dbstruct))))
   ;; (else
   ;;  (debug:print 0 *default-log-port* "ERROR: attempt to open database when not on homehost. Exiting. Homehost: " (common:get-homehost))
   ;;  (exit 1))))

;; Open the classic megatest.db file (defaults to open in toppath)
;;
;;   NOTE: returns a dbdat not a dbstruct!
;;

;;(define (db:reopen-megatest-db

(define (db:open-megatest-db #!key (path #f)(name #f))
(define (db:open-megatest-db dbpath)
  (let* ((dbdir        (or path *toppath*))
         (dbpath       (conc  dbdir "/" (or name "megatest.db")))
	 (dbexists     (common:file-exists? dbpath))
  (let* ((dbexists     (file-exists? dbpath))
	 (db           (db:lock-create-open dbpath
					    (lambda (db)
                                              (db:initialize-main-db db)
                                              (db:initialize-main-db db))))
					      ;;(db:initialize-run-id-db db)
					      )))
	 (write-access (file-write-access? dbpath)))
    (debug:print-info 13 *default-log-port* "db:open-megatest-db "dbpath)
    (if (and dbexists (not write-access))
	(set! *db-write-access* #f))
    (cons db dbpath)))
    ;; (cons db dbpath)))
    (make-dbr:dbdat dbfile: dbpath dbh: db read-only: (not write-access))))

;; sync run to disk if touched
;;
(define (db:sync-touched dbstruct run-id #!key (force-sync #f))
  (let* ((subdb   (dbfile:get-subdb dbstruct run-id))
  (let ((tmpdb   (db:get-db dbstruct))
	(mtdb    (dbr:dbstruct-mtdb   dbstruct))
        (refndb  (dbr:dbstruct-refndb dbstruct))
	(start-t (current-seconds)))
	 (tmpsubdb   (dbfile:get-subdb dbstruct run-id))
         (tmpdbfile (dbr:subdb-tmpdbfile tmpsubdb))
	 (mtdb    (dbr:subdb-mtdbdat subdb))
         (tmpdb (dbfile:open-sqlite3-db tmpdbfile #f))

	 ;; (refndb  (dbr:subdb-refndb subdb))
	 (start-t (current-seconds)))
    (debug:print-info 4 *default-log-port* "Syncing for run-id: " run-id)
    (mutex-lock! *db-multi-sync-mutex*)
    (let ((update_info (cons (if force-sync 0 *db-last-sync*) "last_update")))
    (let ((update_info (cons "last_update" (if force-sync 0 *db-last-sync*) )))
      (mutex-unlock! *db-multi-sync-mutex*)
      (db:sync-tables (db:sync-all-tables-list dbstruct) update_info tmpdb refndb mtdb))
      (db:sync-tables (db:sync-all-tables-list dbstruct) update_info tmpdb mtdb))
    (mutex-lock! *db-multi-sync-mutex*)
    (set! *db-last-sync* start-t)
    (set! *db-last-access* start-t)
    (mutex-unlock! *db-multi-sync-mutex*)
    (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb)))
    (stack-push! (dbr:subdb-dbstack subdb) tmpdb))

(define (db:safely-close-sqlite3-db db stmt-cache #!key (try-num 3))
  (if (<= try-num 0)
      #f
      (handle-exceptions
	  exn
	(begin
	  (print "Attempt to safely close sqlite3 db failed. Trying again. exn=" exn)
	  (thread-sleep! 3)
	  (sqlite3:interrupt! db)
	  (db:safely-close-sqlite3-db db stmt-cache try-num: (- try-num 1)))
	(if (sqlite3:database? db)
	    (let* ((stmts (and stmt-cache (hash-table-ref/default stmt-cache db #f))))
	      (if stmts (map sqlite3:finalize! (hash-table-values stmts)))
	      (sqlite3:finalize! db)
	      #t)
  #t
	    #f))))

;; close all opened run-id dbs
(define (db:close-all dbstruct)
)


  (if (dbr:dbstruct? dbstruct)
      (handle-exceptions
	  exn
	  (begin
	    (debug:print 0 *default-log-port* "WARNING: Finalizing failed, "  ((condition-property-accessor 'exn 'message) exn) ", note - exn=" exn)
	    (print-call-chain *default-log-port*))
	;; (db:sync-touched dbstruct 0 force-sync: #t) ;; NO. Do not do this here. Instead we rely on a server to be started when there are writes, even if the server itself is not going to be used as a server.
        (let ((tdbs       (map db:dbdat-get-db 
			       (stack->list (dbr:dbstruct-dbstack dbstruct))))
              (mdb        (db:dbdat-get-db (dbr:dbstruct-mtdb   dbstruct)))
              (rdb        (db:dbdat-get-db (dbr:dbstruct-refndb dbstruct)))
	      (stmt-cache (dbr:dbstruct-stmt-cache dbstruct)))
          (map (lambda (db)
		 (db:safely-close-sqlite3-db db stmt-cache))
;; db:safely-close-sqlite3-db and db:close-all were here, moved to dbfile
	       tdbs)
          (db:safely-close-sqlite3-db mdb stmt-cache)     ;; (if (sqlite3:database? mdb) (sqlite3:finalize! mdb))
          (db:safely-close-sqlite3-db rdb stmt-cache))))) ;; (if (sqlite3:database? rdb) (sqlite3:finalize! rdb))))))

;;   (let ((locdbs (dbr:dbstruct-locdbs dbstruct)))
;;     (if (hash-table? locdbs)
;; 	(for-each (lambda (run-id)
;; 		    (db:close-run-db dbstruct run-id))
;; 		  (hash-table-keys locdbs)))))

(define (db:sync-all-tables-list dbstruct)
  (append (db:sync-main-list dbstruct)
	  db:sync-tests-only))

;; use bunch of Unix commands to try to break the lock and recreate the db
;;
(define (db:move-and-recreate-db dbdat)
  (let* ((dbpath   (db:dbdat-get-path        dbdat))
  (let* ((dbpath   (dbr:dbdat-dbfile        dbdat))
	 (dbdir    (pathname-directory       dbpath))
	 (fname    (pathname-strip-directory dbpath))
	 (fnamejnl (conc fname "-journal"))
	 (tmpname  (conc fname "." (current-process-id)))
	 (tmpjnl   (conc fnamejnl "." (current-process-id))))
    (debug:print-error 0 *default-log-port* "" fname " appears corrupted. Making backup \"old/" fname "\"")
    (system (conc "cd " dbdir ";mkdir -p old;cat " fname " > old/" tmpname))
    (system (conc "rm -f " dbpath))
    (if (common:file-exists? fnamejnl)
	(begin
	  (debug:print-error 0 *default-log-port* "" fnamejnl " found, moving it to old dir as " tmpjnl)
	  (system (conc "cd " dbdir ";mkdir -p old;cat " fnamejnl " > old/" tmpjnl))
	  (system (conc "rm -f " dbdir "/" fnamejnl))))
    ;; attempt to recreate database
    (system (conc "cd " dbdir ";sqlite3 old/" tmpname " .dump | sqlite3 " fname))))
    
;; return #f to indicate the dbdat should be closed/reopened
;; else return dbdat
;;
(define (db:repair-db dbdat #!key (numtries 1))
  (let* ((dbpath   (db:dbdat-get-path        dbdat))
  (let* ((dbpath   (dbr:dbdat-dbfile        dbdat))
	 (dbdir    (pathname-directory       dbpath))
	 (fname    (pathname-strip-directory dbpath)))
    (debug:print-info 0 *default-log-port* "Checking db " dbpath " for errors.")
    (cond
     ((not (file-write-access? dbdir))
      (debug:print 0 *default-log-port* "WARNING: can't write to " dbdir ", can't fix " fname)
      #f)

   exn
   (begin
     (debug:print 0 *default-log-port* "EXCEPTION: database probably overloaded or unreadable in db:sync-tables.")
     (print-call-chain (current-error-port))
     (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
     (debug:print 5 *default-log-port* "exn=" (condition->list exn))
     (debug:print 0 *default-log-port* " status:  " ((condition-property-accessor 'sqlite3 'status) exn))
     (debug:print 0 *default-log-port* " src db:  " (db:dbdat-get-path fromdb))
     (debug:print 0 *default-log-port* " src db:  " (dbr:dbdat-dbfile fromdb))
     (for-each (lambda (dbdat)
		 (let ((dbpath (db:dbdat-get-path dbdat)))
		 (let ((dbpath (dbr:dbdat-dbfile dbdat)))
		   (debug:print 0 *default-log-port* " dbpath:  " dbpath)
		   (if (not (db:repair-db dbdat))
		       (begin
			 (debug:print-error 0 *default-log-port* "Failed to rebuild " dbpath ", exiting now.")
			 (exit)))))
	       (cons todb slave-dbs))
     
     0)

   ;; this is the work to be done
   ;; this is the work to be done")
   (cond
    ((not fromdb) (debug:print 3 *default-log-port* "WARNING: db:sync-tables called with fromdb missing")
     -1)
    ((not todb)   (debug:print 3 *default-log-port* "WARNING: db:sync-tables called with todb missing")
     -2)
    ((not (sqlite3:database? (db:dbdat-get-db fromdb)))
    ((not (sqlite3:database? (dbr:dbdat-dbh fromdb)))
     (debug:print-error 0 *default-log-port* "db:sync-tables called with fromdb not a database " fromdb)
     -3)
    ((not (sqlite3:database? (db:dbdat-get-db todb)))
   -3)
    ((not (sqlite3:database? (dbr:dbdat-dbh todb)))
     (debug:print-error 0 *default-log-port* "db:sync-tables called with todb not a database " todb)
     -4)
   -4)

    ((not (file-write-access? (db:dbdat-get-path todb)))
    ((not (file-write-access? (dbr:dbdat-dbfile todb)))
     (debug:print-error 0 *default-log-port* "db:sync-tables called with todb not a read-only database " todb)
     -5)
    ((not (null? (let ((readonly-slave-dbs
                        (filter
                         (lambda (dbdat)
                           (not (file-write-access? (db:dbdat-get-path todb))))
                           (not (file-write-access? (dbr:dbdat-dbfile todb))))
                         slave-dbs)))
                   (for-each
                    (lambda (bad-dbdat)
                      (debug:print-error
                       0 *default-log-port* "db:sync-tables called with todb not a read-only database " bad-dbdat))
                    readonly-slave-dbs)
                   readonly-slave-dbs))) -6)
    (else
     (debug:print 3 *default-log-port* "db:sync-tables: args are good")

     (let ((stmts       (make-hash-table)) ;; table-field => stmt
	   (all-stmts   '())              ;; ( ( stmt1 value1 ) ( stml2 value2 ))
	   (numrecs     (make-hash-table))
	   (start-time  (current-milliseconds))
	   (tot-count   0))
       (for-each ;; table
	(lambda (tabledat)
	  (let* ((tablename        (car tabledat))
		 (fields           (cdr tabledat))
		 (has-last-update  (member "last_update" fields))
		 (use-last-update  (cond
				    ((and has-last-update
					  (member "last_update" fields))
				     #t) ;; if given a number, just use it for all fields
				    ((number? last-update) #f) ;; if not matched first entry then ignore last-update for this table
				    ((and (pair? last-update)
					  (member (car last-update)    ;; last-update field name
						  (map car fields)))
                                        #t)
				    (last-update
				    ((and last-update (not (pair? last-update)) (not (number? last-update)))
				     (debug:print 0 *default-log-port* "ERROR: parameter last-update for db:sync-tables must be a pair or a number, received: " last-update);; found in fields
				     #f)
				    (else
				     #f)))
		 (last-update-value (if use-last-update ;; no need to check for has-last-update - it is already accounted for
					(if (number? last-update)
					    last-update

	    ;; set up the field->num table
	    (for-each
	     (lambda (field)
	       (hash-table-set! field->num field count)
	       (set! count (+ count 1)))
	     fields)

            (debug:print 3 *default-log-port* "fromdat: " fromdat)

	    ;; read the source table
            ;; store a list of all rows in the table in fromdat, up to batch-len.
            ;; Then add fromdat to the fromdats list, clear fromdat and repeat.
	    (sqlite3:for-each-row
	     (lambda (a . b)
	       (set! fromdat (cons (apply vector a b) fromdat))
	       (if (> (length fromdat) batch-len)
		   (begin
		     (set! fromdats (cons fromdat fromdats))
		     (set! fromdat  '())
		     (set! totrecords (+ totrecords 1)))))
	     (db:dbdat-get-db fromdb)
		     (set! totrecords (+ totrecords 1)))
               )
             )
	     (dbr:dbdat-dbh fromdb)
	     full-sel)
	    

             ;; Count less than batch-len as a record
             (if (> (length fromdat) 0)
                 (set! totrecords (+ totrecords 1)))

	    ;; tack on remaining records in fromdat
	    (if (not (null? fromdat))
		(set! fromdats (cons fromdat fromdats)))

	    (if (common:low-noise-print 120 "sync-records")
		(debug:print-info 4 *default-log-port* "found " totrecords " records to sync"))
		(debug:print 4 *default-log-port* "found " totrecords " records to sync"))

	    ;; read the target table; BBHERE
	    (sqlite3:for-each-row
	     (lambda (a . b)
	       (hash-table-set! todat a (apply vector a b)))
	     (db:dbdat-get-db todb)
	     (dbr:dbdat-dbh todb)
	     full-sel)

            (when (and delay-handicap (> delay-handicap 0))
              (debug:print-info 0 *default-log-port* "imposing synthetic sync delay of "delay-handicap" seconds since sync/delay-handicap is configured")
              (thread-sleep! delay-handicap)
              (debug:print-info 0 *default-log-port* "synthetic sync delay of "delay-handicap" seconds completed")
              )
            
	    ;; first pass implementation, just insert all changed rows

	    (for-each 
	     (lambda (targdb)
	       (let* ((db                 (db:dbdat-get-db targdb))
	       (let* ((db                 (dbr:dbdat-dbh targdb))
                      (drp-trigger        (if (member "last_update" field-names)
					      (db:drop-trigger db tablename) 
					      #f))
                      (is-trigger-dropped (if (member "last_update" field-names)
                                              (db:is-trigger-dropped db tablename)
					      #f)) 
		      (stmth  (sqlite3:prepare db full-ins)))
		      (stmth  (sqlite3:prepare db full-ins))
                      (changed-rows 0))
		 ;; (db:delay-if-busy targdb) ;; NO WAITING
                 (if (member "last_update" field-names)
                     (debug:print-info 3 *default-log-port* "is-trigger-dropped: " is-trigger-dropped)) 

		 (for-each
		  (lambda (fromdat-lst)
		    (sqlite3:with-transaction
		     db
		     (lambda ()
		       (for-each ;; 
			(lambda (fromrow)
			  (let* ((a    (vector-ref fromrow 0))
				 (curr (hash-table-ref/default todat a #f))
				 (same #t))
			    (let loop ((i 0))
			      (if (or (not curr)
				      (not (equal? (vector-ref fromrow i)(vector-ref curr i))))
				  (set! same #f))
			      (if (and same
				       (< i (- num-fields 1)))
				  (loop (+ i 1))))
			    (if (not same)
				(begin
				  (apply sqlite3:execute stmth (vector->list fromrow))
				  (hash-table-set! numrecs tablename (+ 1 (hash-table-ref/default numrecs tablename 0)))))))
				  (hash-table-set! numrecs tablename (+ 1 (hash-table-ref/default numrecs tablename 0)))
                                  (set! changed-rows (+ changed-rows 1))
                                )
                            )
                            ))
			fromdat-lst))))
		  fromdats)


	         (debug:print 3 *default-log-port* "changed rows: " changed-rows)


		 (sqlite3:finalize! stmth)
                 (if (member "last_update" field-names)
                    (db:create-trigger db tablename))))
	     (append (list todb) slave-dbs))))
	     (append (list todb) slave-dbs)
           )
          )
        )
	tbls)
       (let* ((runtime      (- (current-milliseconds) start-time))
	      (should-print (or (debug:debug-mode 12)
				(common:low-noise-print 120 "db sync" (> runtime 500))))) ;; low and high sync times treated as separate.
	 (if should-print (debug:print 3 *default-log-port* "INFO: db sync, total run time " runtime " ms"))
	 (for-each 
	  (lambda (dat)

;; 	       (cache-db (db:cache-for-read-only
;; 			  megatest-db
;; 			  (conc cache-dir "/" fname)
;; 			  use-last-update: #t)))
;; 	  (thread-start! th1)
;; 	  (apply proc cache-db params)
;; 	  ))))




;; Get a lock from the no-sync-db for the from-db, then delta sync the from-db to the to-db, otherwise return #f

(define (db:lock-and-delta-sync no-sync-db from-db-file to-db-file)
  (assert (not *db-sync-in-progress*) "FATAL: db:lock-and-sync called while a sync is in progress.")
  (let* ((lockdat  (db:no-sync-get-lock no-sync-db from-db))
	 (gotlock  (car lockdat))
	 (locktime (cdr lockdat)))
    (if gotlock
	(begin
          (debug:print 0 *default-log-port* "db:lock-and-sync copying db")
	  ;; (file-copy from-db to-db #t)
	  (db:no-sync-del! no-sync-db from-db)
	  #t)
        (begin
          (debug:print 0 *default-log-port* "could not get lock for " from-db " from no-sync-db")
	  #f
        ))))





;; options:
;;
;;  'killservers  - kills all servers
;;  'dejunk       - removes junk records
;;  'adj-testids  - move test-ids into correct ranges
;;  'old2new      - sync megatest.db to /tmp/.../megatest.db and /tmp/.../megatest_ref.db
;;  'new2old      - sync /tmp/.../megatest.db to megatest.db and /tmp/.../megatest_ref.db (and update data_synced)
;;  'closeall     - close all opened dbs
;;  'schema       - attempt to apply schema changes
;;  run-ids: '(1 2 3 ...) or #f (for all)
;;
(define (db:multi-db-sync dbstruct . options)
  (db:open-db dbstruct #f)
  ;; (if (not (launch:setup))
  ;;    (debug:print 0 *default-log-port* "ERROR: not able to setup up for megatest.")
  (let* ((mtdb     (dbr:dbstruct-mtdb dbstruct))
	 (tmpdb    (db:get-db dbstruct))
	 (refndb   (dbr:dbstruct-refndb dbstruct))
	 (allow-cleanup #t) ;; (if run-ids #f #t))
	 (servers (server:get-list *toppath*)) ;; (tasks:get-all-servers (db:delay-if-busy tdbdat)))

  (let* ((data-synced 0) ;; count of changed records
    (tmp-area       (common:get-db-tmp-area))
    (dbfiles        (glob (conc tmp-area"/.db/*.db")))
    (sync-durations (make-hash-table))
    )

    (for-each
     (lambda (file)
       (debug:print-info 0 *default-log-port* "file: " file)
       (let* ((fname (conc (pathname-file file) ".db"))
	      (fulln (conc *toppath*"/.db/"fname))
	      (time1 (if (file-exists? file)
			 (file-modification-time file)
			 (begin
			   (debug:print-info 0 *default-log-port* "Sync - I do not see file "file)
			   1)))
	      (time2 (if (file-exists? fulln)
			 (file-modification-time fulln)
			 (begin
			   (debug:print-info 0 *default-log-port* "Sync - I do not see file "fulln)
			   0)))
	      (changed (> time1 time2))
	      (do-cp (cond
		      ((not (file-exists? fulln)) ;; shouldn't happen, but this might recover
		       (debug:print-info 0 *default-log-port* "File "fulln" not found! Copying "fname" to "fulln)
		       #t)
		      (changed ;; (and changed
		       ;; (> (- (current-seconds) time1) 3)) ;; if file is changed and three seconds have passed.
		       #t)
		      ((and changed *time-to-exit*) ;; last sync
		       #t)
		      (else
		       #f))))
	 (if do-cp
	     (let* ((start-time (current-milliseconds)))
	       (debug:print-info 0 *default-log-port* "delta sync delta file: " fname", delta: " (- time1 time2) " seconds")
	       (db:lock-and-delta-sync *no-sync-db* file fulln)
	       (hash-table-set! sync-durations (conc fname".db") (- (current-milliseconds) start-time)))
	     (debug:print-info 0 *default-log-port* "skipping delta sync. " file " is up to date")
         )
       )
     )
     dbfiles
    )


    (hash-table->alist sync-durations)



    (debug:print 0 *default-log-port* "db:multi-db-sync subdbs: " (hash-table-values (dbr:dbstruct-subdbs dbstruct)))
    (for-each
     (lambda (subdb)
       (let* ((mtdb     (dbr:subdb-mtdbdat subdb))
	      (tmpdbfile    (dbr:subdb-tmpdbfile subdb))
              (main-tmpdb (dbfile:open-db dbstruct #f db:initialize-main-db))
	      (allow-cleanup #t) ;; (if run-ids #f #t))
	      (servers  (server:get-list *toppath*)) ;; (tasks:get-all-servers (db:delay-if-busy tdbdat)))
	 (data-synced 0)) ;; count of changed records (I hope)
    
    (for-each
     (lambda (option)
       
       (case option
	 ;; kill servers
	 ((killservers)
	  (for-each
	   (lambda (server)
             (handle-exceptions
             exn
             (begin 
               (debug:print-info 0 *default-log-port*  "Unable to get host and/or port from " server ", exn=" exn)     
               #f)
	     (match-let (((mod-time host port start-time server-id pid) server))
	       (if (and host pid)
		   (tasks:kill-server host pid)))))
	   servers)

          ;; /tmp/bjbarcla/megatest_localdb/fullrun/.nfs.pdx.disks.icf_env_disk001.bjbarcla.gwa.issues.mtdev.matt-bisect.megatest.ext-tests.runs.all.v1.65.1.6524.dev.bb-24-justrollup-f8.rollup.fullrun/megatest.db.lock
          (delete-file* (common:get-sync-lock-filepath))
	      )    
         (debug:print 0 *default-log-port* "db:multi-db-sync mtdb: " mtdb " tmpdbfile:" tmpdbfile )
	 (for-each
	  (lambda (option)
	    
	    (case option
	      ;; kill servers
	      ((killservers)
	       (for-each
		(lambda (server)
		  (handle-exceptions
		      exn
		      (begin 
			(debug:print-info 0 *default-log-port*  "Unable to get host and/or port from " server ", exn=" exn)     
			#f)
		    (match-let (((mod-time host port start-time server-id pid) server))
		      (if (and host pid)
			  (tasks:kill-server host pid)))))
		servers)
	       
	       ;; /tmp/bjbarcla/megatest_localdb/fullrun/.nfs.pdx.disks.icf_env_disk001.bjbarcla.gwa.issues.mtdev.matt-bisect.megatest.ext-tests.runs.all.v1.65.1.6524.dev.bb-24-justrollup-f8.rollup.fullrun/megatest.db.lock
	       (delete-file* (common:get-sync-lock-filepath)))
          )
	 
	 ;; clear out junk records
	 ;;
	 ((dejunk)
	  ;; (db:delay-if-busy mtdb) ;; ok to delay on mtdb
	  (when (file-write-access? (db:dbdat-get-path mtdb)) (db:clean-up mtdb))
	  (db:clean-up tmpdb)
	      
	      ;; clear out junk records
	      ;;
	      ((dejunk)
	       ;; (db:delay-if-busy mtdb) ;; ok to delay on mtdb
	       (when (file-write-access? (dbr:dbdat-dbfile mtdb)) (db:clean-up mtdb))
	       (db:clean-up main-tmpdb)
	  (db:clean-up refndb))

	 ;; sync runs, test_meta etc.
	 ;;
	 ((old2new)
	  (set! data-synced
	    (+ (db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb tmpdb refndb)
	       data-synced)))
	 
	 ;; now ensure all newdb data are synced to megatest.db
              )
	      ;; sync from main dbs to /tmp ones.
	      ;;
	      ((old2new)
	       (set! data-synced
		 (+ (db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb main-tmpdb)
		    data-synced)))
	      
	      ;; sync from /tmp dbs to main ones.
	 ;; do not use the run-ids list passed in to the function
	 ;;
	 ((new2old)
	  (set! data-synced
	    (+ (db:sync-tables (db:sync-all-tables-list dbstruct) #f tmpdb refndb mtdb)
	       data-synced)))
	      ;;
	      ((new2old)
	       (set! data-synced
		 (+ (db:sync-tables (db:sync-all-tables-list dbstruct) #f main-tmpdb mtdb)
		    data-synced)))

	 ((adj-target)
	  (db:adj-target (db:dbdat-get-db mtdb))
	  (db:adj-target (db:dbdat-get-db tmpdb))
	      ((adj-target)
	       (db:adj-target (dbr:dbdat-dbh mtdb))
	       (db:adj-target (dbr:dbdat-dbh main-tmpdb))
	  (db:adj-target (db:dbdat-get-db refndb)))
	 
	 ((schema)
	  (db:patch-schema-maindb (db:dbdat-get-db mtdb))
	  (db:patch-schema-maindb (db:dbdat-get-db tmpdb))
              )
	      
	      ((schema)
	       (db:patch-schema-maindb (dbr:dbdat-dbh mtdb))
	       (db:patch-schema-maindb (dbr:dbdat-dbh main-tmpdb))
	  (db:patch-schema-maindb (db:dbdat-get-db refndb))
	  (db:patch-schema-rundb  (db:dbdat-get-db mtdb))
	  (db:patch-schema-rundb  (db:dbdat-get-db tmpdb))
	       (db:patch-schema-rundb  (dbr:dbdat-dbh mtdb))
	       (db:patch-schema-rundb  (dbr:dbdat-dbh main-tmpdb))
	  (db:patch-schema-rundb  (db:dbdat-get-db refndb))))
       
       (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb))
     options)
    data-synced))

(define (db:tmp->megatest.db-sync dbstruct last-update)
  (let* ((mtdb        (dbr:dbstruct-mtdb dbstruct))
	 (tmpdb       (db:get-db dbstruct))
	 (refndb      (dbr:dbstruct-refndb dbstruct))
	 (res         (db:sync-tables (db:sync-all-tables-list dbstruct) last-update tmpdb refndb mtdb)))
    (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb)
               )
              )
	    (stack-push! (dbr:subdb-dbstack subdb) main-tmpdb))
	  options)))
     (hash-table-values (dbr:dbstruct-subdbs dbstruct)))
    data-synced)
)

;; Sync all changed db's
;;
(define (db:tmp->megatest.db-sync dbstruct run-id last-update)
  (let* ((subdbs (hash-table-values (dbr:dbstruct-subdbs dbstruct)))
	 (res    '()))
    (for-each
     (lambda (subdb)
       (let* ((dbname (db:run-id->dbname run-id))
	      (mtdb   (dbr:subdb-mtdb subdb))
	      (tmpdb  (db:get-subdb dbstruct run-id))
	      (refndb (dbr:subdb-refndb subdb))
	      (newres (db:sync-tables (db:sync-all-tables-list dbstruct) last-update tmpdb refndb mtdb)))
	 (stack-push! (dbr:subdb-dbstack subdb) tmpdb)
	 (set! res (cons newres res))))
     subdbs)
    res))

;;;; run-ids
;;    if #f use *db-local-sync* : or 'local-sync-flags
;;    if #t use timestamps      : or 'timestamps
;;
;;  NB// no-sync-db is the db handle, not a flag!

#;(define (open-run-close-no-exception-handling  proc idb . params)
  (debug:print-info 11 *default-log-port* "open-run-close-no-exception-handling START given a db=" (if idb "yes " "no ") ", params=" params)
  (print "I don't work anymore. open-run-close-no-exception-handling needs fixing or removing...")
  (exit)
  (if (or *db-write-access*
	  (not #t)) ;; was: (member proc * db:all-write-procs *)))
      (let* ((db (cond
		  ((pair? idb)                 (db:dbdat-get-db idb))
		  ((pair? idb)                 (dbr:dbdat-dbh idb))
		  ((sqlite3:database? idb)     idb)
		  ((not idb)                   (debug:print-error 0 *default-log-port* "cannot open-run-close with #f anymore"))
		  ((procedure? idb)            (idb))
		  (else   	               (debug:print-error 0 *default-log-port* "cannot open-run-close with #f anymore"))))
	     (res #f))
	(set! res (apply proc db params))
	(if (not idb)(sqlite3:finalize! dbstruct))

                               END;" )
	   (list "update_test_data_trigger"  "CREATE TRIGGER  IF NOT EXISTS update_test_data_trigger AFTER UPDATE ON test_data
                             FOR EACH ROW
                               BEGIN 
                                 UPDATE test_data SET last_update=(strftime('%s','now'))
                                   WHERE id=old.id;
                               END;" )))

;;
;; ADD run-id SUPPORT
;;
(define (db:create-all-triggers dbstruct)
(db:with-db
   dbstruct #f #f
   (lambda (db)
   (lambda (dbdat db)
(db:create-triggers db))))

(define (db:create-triggers db)
    (for-each (lambda (key)
              (sqlite3:execute db (cadr key)))
          db:trigger-list))

(define (db:drop-all-triggers dbstruct)
  (db:with-db
   dbstruct #f #f
   (lambda (db)
   (lambda (dbdat db)
     (db:drop-triggers db))))

(define (db:is-trigger-dropped db tbl-name)
  (let* ((trigger-name (if (equal? tbl-name "test_steps")
			   "update_teststeps_trigger" 
                           (conc "update_" tbl-name "_trigger")))
	 (res          #f))

                              (conc "update_" tbl-name "_trigger"))))
       (for-each (lambda (key) 
             (if (equal? (car key) trigger-name)
             (sqlite3:execute db (cadr key))))
      db:trigger-list))) 


(define (db:initialize-main-db dbdat)
(define (db:initialize-main-db db)
  (when (not *configinfo*)
           (launch:setup)) ;; added because Elena was getting stack dump because *configinfo* below was #f.
  (let* ((configdat (car *configinfo*))  ;; tut tut, global warning...
	 (keys     (keys:config-get-fields configdat))
	 (havekeys (> (length keys) 0))
	 (keystr   (keys->keystr keys))
	 (fieldstr (keys:make-key/field-string configdat))
	 (db       (db:dbdat-get-db dbdat)))
	 #;(db       (dbr:dbdat-dbh dbdat)))
    (for-each (lambda (key)
		(let ((keyn key))
		  (if (member (string-downcase keyn)
			      (list "runname" "state" "status" "owner" "event_time" "comment" "fail_count"
				    "pass_count" "contour"))
		      (begin
			(print "ERROR: your key cannot be named " keyn " as this conflicts with the same named field in the runs table, you must remove your megatest.db and <linktree>/.db before trying again.")

                              id           INTEGER PRIMARY KEY,
                              test_id      INTEGER,
                              state        TEXT DEFAULT 'new',
                              status       TEXT DEFAULT 'n/a',
                              archive_type TEXT DEFAULT 'bup',
                              du           INTEGER,
                              archive_path TEXT);")))
         (print "creating triggers from init") 
        (db:create-triggers db)    
     db)) ;; )

;;======================================================================
;; A R C H I V E S
;;======================================================================

;; dneeded is minimum space needed, scan for existing archives that 
;; are on disks with adequate space and already have this test/itempath
;; archived
;;
(define (db:archive-get-allocations dbstruct testname itempath dneeded)
  (let* ((dbdat        (db:get-db dbstruct)) ;; archive tables are in main.db
	 (db           (db:dbdat-get-db dbdat))
  (let* ((dbdat        (db:get-subdb dbstruct #f)) ;; archive tables are in main.db
	 (db           (dbr:dbdat-dbh dbdat))
	 (res          '())
	 (blocks       '())) ;; a block is an archive chunck that can be added too if there is space
    (sqlite3:for-each-row
     (lambda (id archive-disk-id disk-path last-du last-du-time)
       (set! res (cons (vector id archive-disk-id disk-path last-du last-du-time) res)))
     db
     "SELECT b.id,b.archive_disk_id,b.disk_path,b.last_du,b.last_du_time FROM archive_blocks AS b

    (stack-push! (dbr:dbstruct-dbstack dbstruct) dbdat)
    blocks))
    
;; returns id of the record, register a disk allocated to archiving and record it's last known
;; available space
;;
(define (db:archive-register-disk dbstruct bdisk-name bdisk-path df)
  (let* ((dbdat        (db:get-db dbstruct)) ;; archive tables are in main.db
	 (db           (db:dbdat-get-db dbdat))
  (let* ((dbdat        (db:get-subdb dbstruct #f)) ;; archive tables are in main.db
	 (db           (dbr:dbdat-dbh dbdat))
	 (res          #f))
    (sqlite3:for-each-row
     (lambda (id)
       (set! res id))
     db
     "SELECT id FROM archive_disks WHERE archive_area_name=? AND disk_path=?;"
     bdisk-name bdisk-path)

	  (db:archive-register-disk dbstruct bdisk-name bdisk-path df)))))

;; record an archive path created on a given archive disk (identified by it's bdisk-id)
;; if path starts with / then it is full, otherwise it is relative to the archive disk
;; preference is to store the relative path.
;;
(define (db:archive-register-block-name dbstruct bdisk-id archive-path #!key (du #f))
  (let* ((dbdat        (db:get-db dbstruct)) ;; archive tables are in main.db
	 (db           (db:dbdat-get-db dbdat))
  (let* ((dbdat        (db:get-subdb dbstruct #f)) ;; archive tables are in main.db
	 (db           (dbr:dbdat-dbh dbdat))
	 (res          #f))
    ;; first look to see if this path is already registered
    (sqlite3:for-each-row
     (lambda (id)
       (set! res id))
     db
     "SELECT id FROM archive_blocks WHERE archive_disk_id=? AND disk_path=?;"

;; The "archived" field in tests is overloaded; 0 = not archived, > 0 archived in block with given id
;;
(define (db:test-set-archive-block-id dbstruct run-id test-id archive-block-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE tests SET archived=? WHERE id=?;"
		      archive-block-id test-id))))
 
;; Look up the archive block info given a block-id
;;
(define (db:test-get-archive-block-info dbstruct archive-block-id)
  (db:with-db
   dbstruct
   #f
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let ((res #f))
       (sqlite3:for-each-row 
	;;        0         1           2        3          4           5
	(lambda (id archive-disk-id disk-path last-du last-du-time creation-time)
	  (set! res (vector id archive-disk-id disk-path last-du last-du-time creation-time)))
	db
	"SELECT id,archive_disk_id,disk_path,last_du,last_du_time,creation_time FROM archive_blocks WHERE id=?;"
	archive-block-id)
       res))))

;; (define (db:archive-allocate-testsuite/area-to-block block-id testsuite-name areakey)
;;   (let* ((dbdat        (db:get-db dbstruct #f)) ;; archive tables are in main.db
;; 	 (db           (db:dbdat-get-db dbdat))
;;   (let* ((dbdat        (db:get-subdb dbstruct #f)) ;; archive tables are in main.db
;; 	 (db           (dbr:dbdat-dbh dbdat))
;; 	 (res          '())
;; 	 (blocks       '())) ;; a block is an archive chunck that can be added too if there is space
;;     (sqlite3:for-each-row  #f)

;;======================================================================
;; L O G G I N G    D B 
;;======================================================================

	 (toplevels   '())
	 (deadtime-str (configf:lookup *configdat* "setup" "deadtime"))
	 (deadtime     (if (and deadtime-str
				(string->number deadtime-str))
			   (string->number deadtime-str)
			   72000))) ;; twenty hours
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     dbstruct run-id #f
     (lambda (dbdat db)
       (if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
       
       ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
       ;;
       ;; HOWEVER: this code in run:test seems to work fine
       ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
       ;;                     (db:test-get-run_duration testdat)))

         (running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))
         (running-deadtime (or deadtime-trim running-deadtime-default)) ;; two minutes (30 seconds between updates, this leaves 3x grace period)
         )
    (debug:print-info 4  *default-log-port* "running-deadtime = " running-deadtime)
    (debug:print-info 4  *default-log-port* "deadtime-trim = " deadtime-trim)

    (db:with-db 
     dbstruct #f #f
     (lambda (db)
     dbstruct run-id #f
     (lambda (dbdat db)
       (let* ((stmth1 (db:get-cache-stmth
		       dbstruct db
		       dbdat run-id db
		       "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests 
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?)
                                          AND state IN ('RUNNING');"))
	      (stmth2 (db:get-cache-stmth
		       dbstruct db
		       dbdat run-id db
		       "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests 
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?)
                                          AND state IN ('REMOTEHOSTSTART');"))
	      (stmth3 (db:get-cache-stmth
		       dbstruct db
		       dbdat run-id db
		       "SELECT id,rundir,uname,testname,item_path FROM tests
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400
                                          AND state IN ('LAUNCHED');")))
	 ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
	 ;;
	 ;; HOWEVER: this code in run:test seems to work fine
	 ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)

		 ;;call end of eud of run detection for posthook
		 (launch:end-of-run-check run-id)
		 )))))))

;; BUG: Probably broken - does not explicitly use run-id in the query
;;
(define (db:top-test-set-per-pf-counts dbstruct run-id test-name)
  (db:general-call dbstruct 'top-test-set-per-pf-counts (list test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name)))
  (db:general-call dbstruct run-id 'top-test-set-per-pf-counts (list test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name)))

;; Clean out old junk and vacuum the database
;;
;; Ultimately do something like this:
;;
;; 1. Look at test records either deleted or part of deleted run:
;;    a. If test dir exists, set the the test to state='UNKNOWN', Set the run to 'unknown'
;;    b. If test dir gone, delete the test record
;; 2. Look at run records
;;    a. If have tests that are not deleted, set state='unknown'
;;    b. ....
;;
(define (db:clean-up dbdat)
  ;; (debug:print 0 *default-log-port* "WARNING: db clean up not fully ported to v1.60, cleanup action will be on megatest.db")
  (let* ((keep-record-age ( - (current-seconds) (common:hms-string->seconds (or (configf:lookup *configdat* "setup" "delete-record-age") "30d"))))
	 (db         (db:dbdat-get-db dbdat))
	 (db         (dbr:dbdat-dbh dbdat))
	 (count-stmt (sqlite3:prepare db "SELECT (SELECT count(id) FROM tests)+(SELECT count(id) FROM runs);"))
	(statements
	 (map (lambda (stmt)
		(sqlite3:prepare db stmt))
	      (list
	       ;; delete all tests that belong to runs that are 'deleted'
	       (conc "DELETE FROM tests WHERE run_id in (SELECT id FROM runs WHERE state='deleted') and last_update < " keep-record-age ";")

;;    b. If test dir gone, delete the test record
;; 2. Look at run records
;;    a. If have tests that are not deleted, set state='unknown'
;;    b. ....
;;
(define (db:clean-up-rundb dbdat)
  ;; (debug:print 0 *default-log-port* "WARNING: db clean up not fully ported to v1.60, cleanup action will be on megatest.db")
  (let* ((db         (db:dbdat-get-db dbdat))
  (let* ((db         (dbr:dbdat-dbh dbdat))
	 (count-stmt (sqlite3:prepare db "SELECT (SELECT count(id) FROM tests);"))
	(statements
	 (map (lambda (stmt)
		(sqlite3:prepare db stmt))
	      (list
	       ;; delete all tests that belong to runs that are 'deleted'
	       ;; (conc "DELETE FROM tests WHERE run_id NOT IN (" (string-intersperse (map conc valid-runs) ",") ");")

;;    b. If test dir gone, delete the test record
;; 2. Look at run records
;;    a. If have tests that are not deleted, set state='unknown'
;;    b. ....
;;
(define (db:clean-up-maindb dbdat)
  ;; (debug:print 0 *default-log-port* "WARNING: db clean up not fully ported to v1.60, cleanup action will be on megatest.db")
  (let* ((db         (db:dbdat-get-db dbdat))
  (let* ((db         (dbr:dbdat-dbh dbdat))
	 (count-stmt (sqlite3:prepare db "SELECT (SELECT count(id) FROM runs);"))
	 (statements
	  (map (lambda (stmt)
		 (sqlite3:prepare db stmt))
	       (list
		;; delete all tests that belong to runs that are 'deleted'
		;; (conc "DELETE FROM tests WHERE run_id NOT IN (" (string-intersperse (map conc valid-runs) ",") ");")

;; returns number if string->number is successful, string otherwise
;; also updates *global-delta*
;;
(define (db:get-var dbstruct var)
  (let* ((res      #f))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     dbstruct #f #f  ;; for the moment vars are only stored in main.db
     (lambda (dbdat db)
       (sqlite3:for-each-row
        (lambda (val)
          (set! res val))
        db
        "SELECT val FROM metadat WHERE var=?;" var)
       ;; convert to number if can
       (if (string? res)
           (let ((valnum (string->number res)))
             (if valnum (set! res valnum))))
       res))))

(define (db:inc-var dbstruct var)
  (db:with-db dbstruct #f #t 
	      (lambda (db)
	      (lambda (dbdat db)
		(sqlite3:execute db "UPDATE metadat SET val=val+1 WHERE var=?;" var))))

(define (db:dec-var dbstruct var)
  (db:with-db dbstruct #f #t 
	      (lambda (db)
	      (lambda (dbdat db)
		(sqlite3:execute db "UPDATE metadat SET val=val-1 WHERE var=?;" var))))

;; This was part of db:get-var. It was used to estimate the load on
;; the database files.
;;
;; scale by 10, average with current value.
;;     (set! *global-delta* (/ (+ *global-delta* (* (- (current-milliseconds) start-ms)
;; 						 (if throttle throttle 0.01)))
;; 			    2))
;;     (if (> (abs (- *last-global-delta-printed* *global-delta*)) 0.08) ;; don't print all the time, only if it changes a bit
;; 	(begin
;; 	  (debug:print-info 4 *default-log-port* "launch throttle factor=" *global-delta*)
;; 	  (set! *last-global-delta-printed* *global-delta*)))

(define (db:set-var dbstruct var val)
  (db:with-db dbstruct #f #t 
	      (lambda (db)
	      (lambda (dbdat db)
		(sqlite3:execute db "INSERT OR REPLACE INTO metadat (var,val) VALUES (?,?);" var val))))

(define (db:add-var dbstruct var val)
  (db:with-db dbstruct #f #t 
	      (lambda (db)
	      (lambda (dbdat db)
		(sqlite3:execute db "UPDATE metadat SET val=val+? WHERE var=?;" val var))))

(define (db:del-var dbstruct var)
  (db:with-db dbstruct #f #t 
	      (lambda (db)
	      (lambda (dbdat db)
		(sqlite3:execute db "DELETE FROM metadat WHERE var=?;" var))))

;;======================================================================
;; no-sync.db - small bits of data to be shared between servers
;;======================================================================

(define (db:open-no-sync-db)
(define (db:no-sync-db db-in)
  (let* ((dbpath (db:dbfile-path))
	 (dbname (conc dbpath "/no-sync.db"))
	 (db-exists (common:file-exists? dbname))
	 (db     (sqlite3:open-database dbname)))
    (sqlite3:set-busy-handler! db (sqlite3:make-busy-timeout 136000))
    (if (not db-exists)
  (if db-in
	(begin
	  (sqlite3:execute db "PRAGMA synchronous = 0;")
	  (sqlite3:execute db "CREATE TABLE IF NOT EXISTS no_sync_metadat (var TEXT,val TEXT, CONSTRAINT no_sync_metadat_constraint UNIQUE (var));")
	  (sqlite3:execute db "PRAGMA journal_mode=WAL;")))
    db))

      db-in
      (if *no-sync-db*
;; if we are not a server create a db handle. this is not finalized
;; so watch for problems. I'm still not clear if it is needed to manually
;; finalize sqlite3 dbs with the sqlite3 egg.
;;
(define (db:no-sync-db db-in)
  (mutex-lock! *db-access-mutex*)
  (let ((res (if db-in
	  *no-sync-db*
	  (begin
	    (mutex-lock! *db-access-mutex*)
	    (let ((dbpath (common:get-db-tmp-area))
                 db-in
                 (let ((db (db:open-no-sync-db)))
                   (set! *no-sync-db* db)
		  (db     (dbfile:open-no-sync-db dbpath)))
	      (set! *no-sync-db* db)
                   db))))
    (mutex-unlock! *db-access-mutex*)
    res))
	      (mutex-unlock! *db-access-mutex*)
	      db)))))

(define (db:no-sync-set db var val)
  (sqlite3:execute (db:no-sync-db db) "INSERT OR REPLACE INTO no_sync_metadat (var,val) VALUES (?,?);" var val))

(define (with-no-sync-db proc)
  (let* ((db  (db:no-sync-db *no-sync-db*)))
    (proc db)))
(define (db:no-sync-del! db var)
  (sqlite3:execute (db:no-sync-db db) "DELETE FROM no_sync_metadat WHERE var=?;" var))

(define (db:no-sync-get/default db var default)
(define (db:open-no-sync-db)
  (let ((res default))
    (sqlite3:for-each-row
     (lambda (val)
       (set! res val))
     (db:no-sync-db db)
  (dbfile:open-no-sync-db (db:dbfile-path)))
     "SELECT val FROM no_sync_metadat WHERE var=?;"
     var)
    (if res
        (let ((newres (if (string? res)
			  (string->number res)
			  #f)))
          (if newres
              newres
              res))
        res)))

(define (db:no-sync-close-db db stmt-cache)
  (db:safely-close-sqlite3-db db stmt-cache))

;; transaction protected lock aquisition
;; either:
;;    fails    returns  (#f . lock-creation-time)
;;    succeeds (returns (#t . lock-creation-time)
;; use (db:no-sync-del! db keyname) to release the lock
;;
(define (db:no-sync-get-lock db-in keyname)
  (let ((db (db:no-sync-db db-in)))
    (sqlite3:with-transaction
     db
     (lambda ()
       (handle-exceptions
	   exn
	 (let ((lock-time (current-seconds)))
	   (debug:print-info 2 *default-log-port* "db:no-sync-get-lock keyname=" keyname ", lock-time=" lock-time ", exn=" exn)
	   (sqlite3:execute db "INSERT INTO no_sync_metadat (var,val) VALUES(?,?);" keyname lock-time)
	   `(#t . ,lock-time))
	 `(#f . ,(sqlite3:first-result db "SELECT val FROM no_sync_metadat WHERE var=?;" keyname)))))))



;; use a global for some primitive caching, it is just silly to
;; re-read the db over and over again for the keys since they never
;; change

;; why get the keys from the db? why not get from the *configdat*
;; using keys:config-get-fields?

(define (db:get-keys dbstruct)
  (keys:config-get-fields *configdat*)
)
  (if *db-keys* *db-keys* 
      (let ((res '()))
	(db:with-db dbstruct #f #f
		    (lambda (db)
		      (sqlite3:for-each-row 
		       (lambda (key)
			 (set! res (cons key res)))
		       db
		       "SELECT fieldname FROM keys ORDER BY id DESC;")))
	(set! *db-keys* res)
	res)))
;;  (if *db-keys* *db-keys* 
;;      (let ((res '()))
;;	(db:with-db dbstruct #f #f
;;		    (lambda (dbdat db)
;;		      (sqlite3:for-each-row 
;;		       (lambda (key)
;;			 (set! res (cons key res)))
;;		       db
;;		       "SELECT fieldname FROM keys ORDER BY id DESC;")))
;;	(set! *db-keys* res)
;;	res)))

;; extract index number given a header/data structure
(define (db:get-index-by-header header field)
  (list-index (lambda (x)(equal? x field)) header))

;; look up values in a header/data structure
(define (db:get-value-by-header row header field)

(let ((res `())
           (qry 	(conc "select runname, (max(end_time)-min(event_time))/60 as runtime, target from (select runname, run_id,tests.event_time,tests.event_time+run_duration AS end_time, " (string-join (db:get-keys dbstruct) " || '/' || ") " as target from tests inner join runs on tests.run_id = runs.id where runs.runname like ? and target like ?) group by run_id ;")))
;(print qry)
(db:with-db 
   dbstruct
   #f ;; this is for the main runs db
   #f ;; does not modify db
   (lambda (db)
   (lambda (dbdat db)
            (sqlite3:for-each-row
	(lambda (runname runtime target )
	  (set! res (cons (vector runname runtime target) res)))
	db
        qry 
	run-patt target-patt)
       
       res))))



(define (db:get-run-name-from-id dbstruct run-id)
  (db:with-db 
   dbstruct
   #f ;; this is for the main runs db
   #f ;; does not modify db
   (lambda (db)
   (lambda (dbdat db)
     (let ((res #f))
       (sqlite3:for-each-row
	(lambda (runname)
	  (set! res runname))
	db
	"SELECT runname FROM runs WHERE id=?;"
	run-id)
       res))))

(define (db:get-run-key-val dbstruct run-id key)
  (db:with-db
   dbstruct
   #f
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let ((res #f))
       (sqlite3:for-each-row
	(lambda (val)
	  (set! res val))
	db
	(conc "SELECT " key " FROM runs WHERE id=?;")
	run-id)

	 (qryvals   (append (list runname) (map cadr keyvals)))
	 (key=?str  (string-intersperse (map (lambda (k)(conc k "=?")) keys) " AND ")))
    (debug:print 3 *default-log-port* "keys: " keys " allvals: " allvals " keyvals: " keyvals " key=?str is " key=?str)
    (debug:print 2 *default-log-port* "NOTE: using target " (string-intersperse (map cadr keyvals) "/") " for this run")
    (if (and runname (null? (filter (lambda (x)(not x)) keyvals))) ;; there must be a better way to "apply and"
	(db:with-db
	 dbstruct #f #f
	 (lambda (db)
	 (lambda (dbdat db)
	   (let ((res #f))
	     (apply sqlite3:execute db (conc "INSERT OR IGNORE INTO runs (runname,state,status,owner,event_time,contour" comma keystr ") VALUES (?,?,?,?,strftime('%s','now'),?" comma valslots ");")
		    allvals)
	     (apply sqlite3:for-each-row 
		    (lambda (id)
		      (set! res id))
		    db

			       (conc " LIMIT " count)
			       "")
			   (if (number? offset)
			       (conc " OFFSET " offset)
			       ""))))
    (debug:print-info 11 *default-log-port* "db:get-runs START qrystr: " qrystr " keypatts: " keypatts " offset: " offset " limit: " count)
    (db:with-db dbstruct #f #f
		(lambda (db)		
		(lambda (dbdat db)		
		  (sqlite3:for-each-row
		   (lambda (a . x)
		     (set! res (cons (apply vector a x) res)))
		   db
		   qrystr
		   )))
    (debug:print-info 11 *default-log-port* "db:get-runs END qrystr: " qrystr " keypatts: " keypatts " offset: " offset " limit: " count)

				 "")
			     (if (number? offset)
				 (conc " OFFSET " offset)
				 "")))
	   )
    (debug:print-info 11 *default-log-port* "db:get-runs START qrystr: " qrystr " target: " target " offset: " offset " limit: " count)
    (db:with-db dbstruct #f #f
		(lambda (db)		
		(lambda (dbdat db)		
		  (sqlite3:for-each-row
		   (lambda (target id runname state status owner event_time)
		     (set! res (cons (make-simple-run target id runname state status owner event_time) res)))
		   db
		   qrystr
		   )))
    (debug:print-info 11 *default-log-port* "db:get-runs END qrystr: " qrystr " target: " target " offset: " offset " limit: " count)

	 (keystr     (keys->keystr keys))
	 (qrystr     (conc "SELECT " keystr " FROM runs WHERE state != 'deleted';"))
	 (seen       (make-hash-table)))
    (db:with-db
     dbstruct
     #f
     #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (a . x)
	  (let ((targ (cons a x)))
	    (if (not (hash-table-ref/default seen targ #f))
		(begin
		  (hash-table-set! seen targ #t)
		  (set! res (cons (apply vector targ) res))))))
	db
	qrystr)
       (debug:print-info 11 *default-log-port* "db:get-targets END qrystr: " qrystr )
       (vector header res)))))

;; just get count of runs
(define (db:get-num-runs dbstruct runpatt)
  (db:with-db
   dbstruct
   #f
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let ((numruns 0))
       (debug:print-info 11 *default-log-port* "db:get-num-runs START " runpatt)
       (sqlite3:for-each-row 
	(lambda (count)
	  (set! numruns count))
	db
	"SELECT COUNT(id) FROM runs WHERE runname LIKE ? AND state != 'deleted';" runpatt)
       (debug:print-info 11 *default-log-port* "db:get-num-runs END " runpatt)
       numruns))))

;; just get count of runs
(define (db:get-runs-cnt-by-patt dbstruct runpatt targetpatt keys)
  (db:with-db
   dbstruct
   #f
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let ((numruns 0)
           (qry-str #f)
           (key-patt "")
	     	   (keyvals  (if targetpatt (keys:target->keyval keys targetpatt) '())))
     
    (for-each (lambda (keyval)
		(let* ((key    (car keyval))

;; (sqlite3#fold-row proc3670 init3671 db-or-stmt3672 . params3673)>
;; 
(define (db:get-raw-run-stats dbstruct run-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:fold-row
	(lambda (res state status count)
	  (cons (list state status count) res))
	'()
	db
	"SELECT state,status,count(id) AS count FROM tests WHERE run_id=? AND NOT(uname='n/a' AND item_path='') GROUP BY state,status;"
	run-id))))

;; Update run_stats for given run_id
;; input data is a list (state status count)
;;
(define (db:update-run-stats dbstruct run-id stats)
  ;; (mutex-lock! *db-transaction-mutex*)
  (db:with-db
   dbstruct
   #f
   #f

   (lambda (db)
   (lambda (dbdat db)
     ;; remove previous data
     
     (let* ((stmt1 (sqlite3:prepare db "DELETE FROM run_stats WHERE run_id=? AND state=? AND status=?;"))
	    (stmt2 (sqlite3:prepare db "INSERT INTO run_stats (run_id,state,status,count) VALUES (?,?,?,?);"))
	    (res
	     (sqlite3:with-transaction
	      db

       res))))

(define (db:get-main-run-stats dbstruct run-id)
  (db:with-db
   dbstruct
   #f ;; this data comes from main
   #f
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:fold-row
	(lambda (res state status count)
	  (cons (list state status count) res))
	'()
	db
	"SELECT state,status,count FROM run_stats WHERE run_id=? AND run_id IN (SELECT id FROM runs WHERE state NOT IN ('DELETED','deleted'));"
	run-id))))

    (debug:print-info 0 *default-log-port* "TOTAL: " total " api calls since start.")))

(define (db:get-all-run-ids dbstruct)
  (db:with-db
   dbstruct
   #f
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let ((run-ids '()))
       (sqlite3:for-each-row
	(lambda (run-id)
	  (set! run-ids (cons run-id run-ids)))
	db
	"SELECT id FROM runs WHERE state != 'deleted' ORDER BY event_time DESC;")
    (reverse run-ids)))))

  (let* ((totals       (make-hash-table))
	 (curr         (make-hash-table))
	 (res          '())
	 (runs-info    '()))
    ;; First get all the runname/run-ids
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (run-id runname)
	  (set! runs-info (cons (list run-id runname) runs-info)))
	db
	"SELECT id,runname FROM runs WHERE state != 'deleted' ORDER BY event_time DESC;"))) ;; If you change this to the more logical ASC please adjust calls to db:get-run-stats
    ;; for each run get stats data
    (for-each
     (lambda (run-info)
       ;; get the net state/status counts for this run
       (let* ((run-id   (car  run-info))
	      (run-name (cadr run-info)))
	 (db:with-db
	  dbstruct
	  run-id
	  #f
	  (lambda (db)
	  (lambda (dbdat db)
	    (sqlite3:for-each-row
	     (lambda (state status count)
	       (let ((netstate (if (equal? state "COMPLETED") status state)))
		 (if (string? netstate)
		     (begin
		       (hash-table-set! totals netstate (+ (hash-table-ref/default totals netstate 0) count))
		       (hash-table-set! curr   netstate (+ (hash-table-ref/default curr   netstate 0) count))))))

			";"))
    (debug:print-info 4 *default-log-port* "runs:get-runs-by-patt qry=" qry-str " " runnamepatt)
    ;(print "runs:get-runs-by-patt qry=" qry-str " " runnamepatt)

    (vector header 
            (reverse
             (db:with-db dbstruct #f #f ;; reads db, does not write to it.
                         (lambda (db)
                         (lambda (dbdat db)
                           (sqlite3:fold-row
                            (lambda (res . r)
                              (cons (list->vector r) res))
                            '()
                            db
                            qry-str
                            runnamepatt)))))))

	 (header    (append keys remfields))
	 (keystr    (conc (keys->keystr keys) ","
			  (string-intersperse remfields ","))))
    (debug:print-info 11 *default-log-port* "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
    
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (a . x)
	  (set! res (apply vector a x)))
	db 
	(conc "SELECT " keystr " FROM runs WHERE id=?;")
	run-id)))
    (debug:print-info 11 *default-log-port* "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
    (let ((finalres (vector header res)))
      ;; (hash-table-set! *run-info-cache* run-id finalres)
      finalres)))

(define (db:set-comment-for-run dbstruct run-id comment)
  (db:with-db
   dbstruct #f #f
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE runs SET comment=? WHERE id=?;" comment ;; (sdb:qry 'getid comment)
		      run-id))))

;; does not (obviously!) removed dependent data. But why not!!?
(define (db:delete-run dbstruct run-id)
  (db:with-db
   dbstruct #f #f
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:with-transaction
      db
      (lambda ()
        (sqlite3:execute db "DELETE FROM test_steps WHERE test_id IN (SELECT id FROM tests WHERE run_id=?);" run-id)
        (sqlite3:execute db "DELETE FROM test_data WHERE test_id IN (SELECT id FROM tests WHERE run_id=?);"  run-id)
        (sqlite3:execute db "UPDATE tests SET state='DELETED',comment='' WHERE run_id=?;" run-id)
        ;; (db:delay-if-busy dbdat)
        (sqlite3:execute db "UPDATE runs SET state='deleted',comment='' WHERE id=?;" run-id))))))

(define (db:update-run-event_time dbstruct run-id)
  (db:with-db
   dbstruct #f #t
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE runs SET event_time=strftime('%s','now') WHERE id=?;" run-id))))

(define (db:lock/unlock-run dbstruct run-id lock unlock user)
  (db:with-db
   dbstruct #f #t
   (lambda (db)
   (lambda (dbdat db)
     (let ((newlockval (if lock "locked"
			   (if unlock
			       "unlocked"
			       "locked")))) ;; semi-failsafe
       (sqlite3:execute db "UPDATE runs SET state=? WHERE id=?;" newlockval run-id)
       (sqlite3:execute db "INSERT INTO access_log (user,accessed,args) VALUES(?,strftime('%s','now'),?);"
			user (conc newlockval " " run-id))
       (debug:print-info 1 *default-log-port* "" newlockval " run number " run-id)))))

(define (db:set-run-status dbstruct run-id status msg)
  (db:with-db
   dbstruct #f #f
   (lambda (db)
   (lambda (dbdat db)
       (if msg
         (sqlite3:execute db "UPDATE runs SET status=?,comment=? WHERE id=?;" status msg run-id)
         (sqlite3:execute db "UPDATE runs SET status=? WHERE id=?;" status run-id)))))

(define (db:set-run-state-status dbstruct run-id state status )
  (db:with-db
   dbstruct #f #f
   (lambda (db)
   (lambda (dbdat db)
          (sqlite3:execute db "UPDATE runs SET status=?,state=? WHERE id=?;" status state run-id))))



(define (db:get-run-status dbstruct run-id)
  (let ((res "n/a"))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (status)
	  (set! res status))
	db
	"SELECT status FROM runs WHERE id=?;" 
	run-id)
       res))))

(define (db:get-run-state dbstruct run-id)
  (let ((res "n/a"))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (status)
	  (set! res status))
	db
	"SELECT state FROM runs WHERE id=?;" 
	run-id)
       res))))


;;======================================================================
;; K E Y S
;;======================================================================

;; get key val pairs for a given run-id
;; ( (FIELDNAME1 keyval1) (FIELDNAME2 keyval2) ... )
(define (db:get-key-val-pairs dbstruct run-id)
  (let* ((keys (db:get-keys dbstruct))
	 (res  '()))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     (lambda (dbdat db)
       (for-each 
	(lambda (key)
	  (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	    (sqlite3:for-each-row 
	     (lambda (key-val)
	       (set! res (cons (list key (if (string? key-val) key-val "")) res))) ;; replace non-string bad values with empty string to prevent crashes. This scenario can happen when Megatest is killed on updating the db
	     db qry run-id)))
	keys)))
       (reverse res)))

;; get key vals for a given run-id
(define (db:get-key-vals dbstruct run-id)
  (let* ((keys (db:get-keys dbstruct))
	 (res  '()))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     (lambda (dbdat db)
       (for-each 
	(lambda (key)
	  (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	    ;; (db:delay-if-busy dbdat)
	    (sqlite3:for-each-row 
	     (lambda (key-val)
	       (set! res (cons (if (string? key-val) key-val "") res))) ;; check that the key-val is a string for cases where a crash injected bad data in the megatest.db

	 (keys    (db:get-keys dbstruct))
	 (qrystr  (string-intersperse (map (lambda (x)(conc x "=?")) keys) " AND ")))
    (let ((prev-run-ids '()))
      (if (null? keyvals)
          '()
          (begin
            (db:with-db dbstruct #f #f ;; #f means work with the zeroth db - i.e. the runs db
                        (lambda (db)
                        (lambda (dbdat db)
                          (apply sqlite3:for-each-row
                                 (lambda (id)
                                   (set! prev-run-ids (cons id prev-run-ids)))
                                 db
                                 (conc "SELECT id FROM runs WHERE " qrystr " AND state != 'deleted' AND id != ?;")
                                 (append kvalues (list run-id)))))
            prev-run-ids)))))

				(if sort-order sort-order " ")
				(if limit  (conc " LIMIT " limit)   " ")
				(if offset (conc " OFFSET " offset) " ")
				";"
				)))
    (debug:print-info 8 *default-log-port* "db:get-tests-for-run run-id=" run-id ", qry=" qry)
    (let* ((res (db:with-db dbstruct run-id #f
			    (lambda (db)
			    (lambda (dbdat db)
			      ;; (let* ((stmth (db:get-cache-stmth dbstruct db qry))) ;; due to use of last-update we can't efficiently cache this query
				(reverse
				 (sqlite3:fold-row
				  (lambda (res . row)
				    ;; id run-id testname state status event-time host cpuload
				    ;;     diskfree uname rundir item-path run-duration final-logf comment)
				    (cons (list->vector row) res))

;; 1. cache tests-match-qry
;; 2. compile qry and store in hash
;; 3. convert for-each-row to fold
;;
;; (define (db:get-tests-for-run-state-status dbstruct run-id testpatt)
;;   (db:with-db
;;    dbstruct run-id #f
;;    (lambda (db)
;;    (lambda (dbdat db)
;;      (let* ((res            '())
;; 	    (stmt-cache      (dbr:dbstruct-stmt-cache dbstruct))
;; 	    (stmth           (let* ((sh (db:hoh-get stmt-cache db testpatt)))
;; 			       (or sh
;; 				   (let* ((tests-match-qry (tests:match->sqlqry testpatt))
;; 					  (qry             (conc "SELECT id,testname,item_path,state,status FROM tests WHERE run_id=? " 
;; 								 (if tests-match-qry (conc " AND (" tests-match-qry ") ") "")))

	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT id,testname,item_path,state,status,event_time,run_duration FROM tests WHERE run_id=? " 
				" AND last_update > ? "
				(if tests-match-qry (conc " AND (" tests-match-qry ") ") "")
				)))
    (debug:print-info 8 *default-log-port* "db:get-tests-for-run qry=" qry)
    (db:with-db dbstruct run-id #f
		(lambda (db)
		(lambda (dbdat db)
		  (sqlite3:fold-row
		   (lambda (res id testname item-path state status event-time run-duration)
		     ;;            id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
		     (cons (vector id run-id testname state status event-time  ""     -1      -1       ""    "-"  item-path run-duration  "-"         "-") res))
		   '()
		   db 
		   qry
		   run-id
		   (or last-update 0))))))

(define (db:get-testinfo-state-status dbstruct run-id test-id)
  (let ((res            #f))
    (db:with-db dbstruct run-id #f
		(lambda (db)
		(lambda (dbdat db)
		  (sqlite3:for-each-row
		   (lambda (run-id testname item-path state status)
		     ;; id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
		     (set! res (vector test-id run-id testname state status -1 "" -1 -1 "" "-" item-path -1 "-" "-")))
		   db 
		   "SELECT run_id,testname,item_path,state,status FROM tests WHERE id=?;" 
		   test-id)))

	 (db:get-all-run-ids dbstruct)))
    res))

;; Convert calling routines to get list of run-ids and loop, do not use the get-tests-for-runs
;;

(define (db:delete-test-records dbstruct run-id test-id)
  (db:general-call dbstruct 'delete-test-step-records (list test-id))
  (db:general-call dbstruct 'delete-test-data-records (list test-id))
  (db:general-call dbstruct run-id 'delete-test-step-records (list test-id))
  (db:general-call dbstruct run-id 'delete-test-data-records (list test-id))
  (db:with-db
   dbstruct #f #f
   (lambda (db)
   dbstruct run-id #f
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE tests SET state='DELETED',status='n/a',comment='' WHERE id=?;" test-id))))

;; 
(define (db:delete-old-deleted-test-records dbstruct)
  (let ((targtime (- (current-seconds)
		     (or (configf:lookup-number *configdat* "setup" "keep-deleted-records")
			 (* 30 24 60 60))))) ;; one month in the past
    (db:with-db
     dbstruct
     0
     #t
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:with-transaction
	db
	(lambda ()
	  (sqlite3:execute db "DELETE FROM test_steps WHERE test_id IN (SELECT id FROM tests WHERE state='DELETED' AND event_time<?);" targtime)
	  (sqlite3:execute db "DELETE FROM test_data WHERE test_id IN (SELECT id FROM tests WHERE state='DELETED' AND event_time<?);" targtime)
	  (sqlite3:execute db "DELETE FROM tests WHERE state='DELETED' AND event_time<?;" targtime)))))))

			(if currstatus (conc "status='" currstatus "' AND ") "")
			" run_id=? AND testname LIKE ?;"))
	     (test-id (db:get-test-id dbstruct run-id testname "")))
	 (db:with-db
	  dbstruct
	  run-id
	  #t
	  (lambda (db)
	  (lambda (dbdat db)
	    (sqlite3:execute db qry
			     (or newstate  currstate "NOT_STARTED")
			     (or newstatus currstate "UNKNOWN")
			     run-id testname)))
	 (if test-id
	     (begin
	       (set! test-ids (cons test-id test-ids))
	       (mt:process-triggers dbstruct run-id test-id newstate newstatus)))))
     testnames)
    test-ids))

;; ;; speed up for common cases with a little logic
;; ;; NB// Ultimately this will be deprecated in deference to mt:test-set-state-status-by-id
;;
;;      NOTE: run-id is not used
;; ;;
(define (db:test-set-state-status dbstruct run-id test-id newstate newstatus newcomment)
  (db:with-db
   dbstruct
   ;; run-id
   run-id
   #f
   #t
   (lambda (db)
   (lambda (dbdat db)
     (cond
      ((and newstate newstatus newcomment)
       (sqlite3:execute db "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;" newstate newstatus newcomment ;; (sdb:qry 'getid newcomment)
			test-id))
      ((and newstate newstatus)
       (sqlite3:execute db "UPDATE tests SET state=?,status=? WHERE id=?;" newstate newstatus test-id))
      (else

  (let* ((qry ;; (if fastmode
		;;   "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '') LIMIT 1;"
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '');")) ;; )
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
     (let* ((stmth (db:get-cache-stmth dbstruct  db qry)))
   (lambda (dbdat db)
     (let* ((stmth (db:get-cache-stmth dbdat run-id db qry)))
       (sqlite3:first-result stmth))))))

;; NEW BEHAVIOR: Count tests running in only one run!
;;
(define (db:get-count-tests-actually-running dbstruct run-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:first-result
      db
      ;; WARNING BUG EDIT ME - merged from v1.55 - not sure what is right here ...
      ;; "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id NOT IN (SELECT id FROM runs WHERE state='deleted') AND NOT (uname = 'n/a' AND item_path = '');")
      "SELECT count(id) FROM tests WHERE state in ('RUNNING','REMOTEHOSTSTART','LAUNCHED') AND run_id=?;" 
      run-id)))) ;; NOT IN (SELECT id FROM runs WHERE state='deleted');")

;; NEW BEHAVIOR: Look only at single run with run-id
;; 
;; (define (db:get-running-stats dbstruct run-id)
(define (db:get-count-tests-running-for-run-id dbstruct run-id) ;; fastmode)
  (let* ((qry ;; (if fastmode
		 ;;  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? LIMIT 1;"
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=?;")) ;; )
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (db)
       (let* ((stmth (db:get-cache-stmth dbstruct db qry)))
     (lambda (dbdat db)
       (let* ((stmth (db:get-cache-stmth dbdat run-id db qry)))
	 (sqlite3:first-result stmth run-id))))))

;; For a given testname how many items are running? Used to determine
;; probability for regenerating html
;;
(define (db:get-count-tests-running-for-testname dbstruct run-id testname)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let* ((stmt "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? AND NOT (uname = 'n/a' AND item_path = '') AND testname=?;")
	    (stmth (db:get-cache-stmth dbstruct db stmt)))
	    (stmth (db:get-cache-stmth dbdat run-id db stmt)))
       (sqlite3:first-result
	stmth run-id testname)))))

(define (db:get-not-completed-cnt dbstruct run-id)
(db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
      ;(print "SELECT count(id) FROM tests WHERE state not in ('COMPLETED', 'DELETED') AND run_id=" run-id)  
     (sqlite3:first-result
      db
      "SELECT count(id) FROM tests WHERE state not in ('COMPLETED', 'DELETED') AND run_id=?;" run-id))))

(define (db:get-count-tests-running-in-jobgroup dbstruct run-id jobgroup)
  (if (not jobgroup)
      0 ;; 
      (let ((testnames '()))
	;; get the testnames
	(db:with-db
	 dbstruct #f #f
	 (lambda (db)
	 (lambda (dbdat db)
	   (sqlite3:for-each-row
	    (lambda (testname)
	      (set! testnames (cons testname testnames)))
	    db
	    "SELECT testname FROM test_meta WHERE jobgroup=?"
	    jobgroup)))
	;; get the jobcount NB// EXTEND THIS TO OPPERATE OVER ALL RUNS?
	(if (not (null? testnames))
	    (db:with-db
	     dbstruct
	     run-id
	     #f
	     (lambda (db)
	     (lambda (dbdat db)
	       (sqlite3:first-result
		db
		(conc "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND testname in ('"
		      (string-intersperse testnames "','")
		      "') AND NOT (uname = 'n/a' AND item_path='');")) ;; should this include the (uname = 'n/a' ...) ???
	       ))
	    0))))

;; tags: '("tag%" "tag2" "%ag6")
;;

;; done with run when:
;;   0 tests in LAUNCHED, NOT_STARTED, REMOTEHOSTSTART, RUNNING
(define (db:estimated-tests-remaining dbstruct run-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:first-result
      db
      "SELECT count(id) FROM tests WHERE state in ('LAUNCHED','NOT_STARTED','REMOTEHOSTSTART','RUNNING','KILLREQ') AND run_id=?;")
     run-id)))

;; map run-id, testname item-path to test-id
(define (db:get-test-id dbstruct run-id testname item-path)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (db:first-result-default
      db
      "SELECT id FROM tests WHERE testname=? AND item_path=? AND run_id=?;"
      #f ;; the default
      testname item-path run-id))))

;; overload the unused attemptnum field for the process id of the runscript or 
;; ezsteps step script in progress
;;
(define (db:test-set-top-process-pid dbstruct run-id test-id pid)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE tests SET attemptnum=? WHERE id=?;"
		      pid test-id))))

(define (db:test-get-top-process-pid dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (db:first-result-default 
      db
      "SELECT attemptnum FROM tests WHERE id=?;"
      #f
      test-id))))

(define db:test-record-fields '("id"           "run_id"        "testname"  "state"      "status"      "event_time"

		(loop (car tal)(cdr tal)(+ indx 1)))))))

(define db:test-record-qry-selector (string-intersperse db:test-record-fields ","))

(define (db:update-tesdata-on-repilcate-db dbstruct old-lt new-lt)
  (db:with-db
   dbstruct   #f   #f
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE tests SET rundir= replace(rundir,?,?), shortdir=replace(shortdir,?,?);"
		      old-lt new-lt  old-lt new-lt))))

;; NOTE: Use db:test-get* to access records
;; NOTE: This needs rundir decoding? Decide, decode here or where used? For the moment decode where used.
(define (db:get-all-tests-info-by-run-id dbstruct run-id)
  (let* ((res '()))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment shortdir attemptnum archived)
	  ;;                 0    1       2      3      4        5       6      7        8     9     10      11          12          13       14     15        16
	  (set! res (cons (vector id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment shortdir attemptnum archived)
			  res)))
	db
	(conc "SELECT " db:test-record-qry-selector " FROM tests WHERE state != 'DELETED' AND run_id=?;")
	run-id)))
    res))

(define (db:replace-test-records dbstruct run-id testrecs)
  (db:with-db dbstruct run-id #t 
	      (lambda (db)
	      (lambda (dbdat db)
		(let* ((qmarks (string-intersperse (make-list (length db:test-record-fields) "?") ","))
		       (qrystr (conc "INSERT OR REPLACE INTO tests (" db:test-record-qry-selector ") VALUES (" qmarks ") WHERE run_id=?;"))
		       (qry    (sqlite3:prepare db qrystr)))
		  (debug:print 0 *default-log-port* "INFO: migrating test records for run with id " run-id)
		  (sqlite3:with-transaction
		   db
		   (lambda ()

  (if (>= test-id min-test-id)
      test-id
      (let loop ((new-id min-test-id))
	(let ((test-id-found #f))
	  (sqlite3:for-each-row 
	   (lambda (id)
	     (set! test-id-found id))
	   (db:dbdat-get-db mtdb)
	   (dbr:dbdat-dbh mtdb)
	   "SELECT id FROM tests WHERE id=?;"
	   new-id)
	  ;; if test-id-found then need to try again
	  (if test-id-found
	      (loop (+ new-id 1))
	      (begin
		(debug:print-info 0 *default-log-port* "New test id " new-id " selected for test with id " test-id)
		(sqlite3:execute mtdb "UPDATE tests SET id=? WHERE id=?;" new-id test-id)))))))

;; move test ids into the 30k * run_id range
;;
(define (db:prep-megatest.db-adj-test-ids mtdb run-id testrecs)
  (debug:print-info 0 *default-log-port* "Adjusting test ids in megatest.db for run " run-id)
  (let ((min-test-id (* run-id 30000)))
    (for-each 
     (lambda (testrec)
       (let* ((test-id (vector-ref testrec (db:field->number "id" db:test-record-fields))))
	 (db:adj-test-id (db:dbdat-get-db mtdb) min-test-id test-id)))
	 (db:adj-test-id (dbr:dbdat-dbh mtdb) min-test-id test-id)))
     testrecs)))
	
;; 1. move test ids into the 30k * run_id range
;; 2. move step ids into the 30k * run_id range
;;
(define (db:prep-megatest.db-for-migration mtdb)
  (let* ((run-ids (db:get-all-run-ids mtdb)))
    (for-each 
     (lambda (run-id)
       (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id)))
	 (db:prep-megatest.db-adj-test-ids (db:dbdat-get-db mtdb) run-id testrecs)))
	 (db:prep-megatest.db-adj-test-ids (dbr:dbdat-dbh mtdb) run-id testrecs)))
     run-ids)))

;; Get test data using test_id, run-id is not used
;; 
(define (db:get-test-info-by-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   #f ;; run-id
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let ((res #f))
       (sqlite3:for-each-row ;; attemptnum added to hold pid of top process (not Megatest) controlling a test
	(lambda (id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived last-update)
	  ;;                0    1       2      3      4        5       6      7        8     9     10      11          12          13           14         15          16
	  (set! res (vector id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived last-update)))
	db
	(conc "SELECT " db:test-record-qry-selector " FROM tests WHERE id=?;")
	test-id)
       res))))

;; Use db:test-get* to access
;; Get test data using test_ids. NB// Only works within a single run!!
;;
(define (db:get-test-info-by-ids dbstruct run-id test-ids)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let ((res '()))
       (sqlite3:for-each-row
	(lambda (a . b)
	  ;;                 0    1       2      3      4        5       6      7        8     9     10      11          12          13       14
	  (set! res (cons (apply vector a b) res)))
	db
	(conc "SELECT " db:test-record-qry-selector " FROM tests WHERE id in ("
	      (string-intersperse (map conc test-ids) ",") ");"))
       res))))

(define (db:get-test-info dbstruct run-id test-name item-path)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let ((res #f))
       (sqlite3:for-each-row
	(lambda (a . b)
	  (set! res (apply vector a b)))
	db
	(conc "SELECT " db:test-record-qry-selector " FROM tests WHERE testname=? AND item_path=? AND run_id=?;")
	test-name item-path run-id)
       res))))

(define (db:test-get-rundir-from-test-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (db:first-result-default
      db
      "SELECT rundir FROM tests WHERE id=?;"
      #f ;; default result
      test-id))))

(define (db:get-test-times dbstruct run-name target)
  (let ((res `())
        (qry 	(conc "select testname, item_path, run_duration, "
		      (string-join (db:get-keys dbstruct) " || '/' || ")
		      " as target from tests inner join runs on tests.run_id = runs.id where runs.runname = ? and target = ?  ;")))
  (db:with-db 
    dbstruct
    #f ;; this is for the main runs db
    #f ;; does not modify db
    (lambda (db)
    (lambda (dbdat db)
            (sqlite3:for-each-row
	(lambda (test-name item-path test-time target )
	  (set! res (cons (vector test-name item-path test-time) res)))
	db
        qry 
	run-name target)
       res))))

;;======================================================================
;; S T E P S
;;======================================================================

(define (db:teststep-set-status! dbstruct run-id test-id teststep-name state-in status-in comment logfile)
  (db:with-db
   dbstruct
   run-id
   #t
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:execute 
      db
      "INSERT OR REPLACE into test_steps (test_id,stepname,state,status,event_time,comment,logfile) VALUES(?,?,?,?,?,?,?);"
      test-id teststep-name state-in status-in (current-seconds)
      (if comment comment "")
      (if logfile logfile "")))))



(define (db:delete-steps-for-test! dbstruct run-id test-id)
  ;; TODO: figure out why status is the key field rather than state (note:  CONSTRAINT test_steps_constraint UNIQUE (test_id,stepname,state) )
  (db:with-db
   dbstruct
   run-id
   #t
   (lambda (db)
   (lambda (dbdat db)
     (sqlite3:execute 
      db
      "UPDATE test_steps set status='DELETED' where test_id=?" ;;  and run_id=? !! - run_id not in table (bummer) TODO: get run_id into schema for test_steps
      test-id))))


;; db-get-test-steps-for-run
(define (db:get-steps-for-test dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let* ((res '()))
       (sqlite3:for-each-row 
	(lambda (id test-id stepname state status event-time logfile comment)
	  (set! res (cons (vector id test-id stepname state status event-time (if (string? logfile) logfile "") comment) res)))
	db
	"SELECT id,test_id,stepname,state,status,event_time,logfile,comment FROM test_steps WHERE status != 'DELETED' AND test_id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
	test-id)
       (reverse res)))))

 (define (db:get-steps-info-by-id dbstruct  test-step-id)
   (db:with-db
    dbstruct
    #f 
    #f
    (lambda (db)
    (lambda (dbdat db)
      (let* ((res (vector #f #f #f #f #f #f #f #f #f)))
        (sqlite3:for-each-row 
       (lambda (id test-id stepname state status event-time logfile comment last-update)
         (set! res (vector id test-id stepname state status event-time (if (string? logfile) logfile "") comment last-update)))
       db
       "SELECT id,test_id,stepname,state,status,event_time,logfile,comment,last_update FROM test_steps WHERE id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
       test-step-id)
        res))))

(define (db:get-steps-data dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let ((res '()))
       (sqlite3:for-each-row 
	(lambda (id test-id stepname state status event-time logfile)
	  (set! res (cons (vector id test-id stepname state status event-time (if (string? logfile) logfile "")) res)))
	db
	"SELECT id,test_id,stepname,state,status,event_time,logfile FROM test_steps WHERE status != 'DELETED' AND test_id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
	test-id)
       (reverse res)))))

;;======================================================================
;; T E S T  D A T A 
;;======================================================================

(define (db:get-data-info-by-id dbstruct  test-data-id)
  (let* ((stmt        "SELECT id,test_id, category, variable, value, expected, tol, units, comment, status, type, last_update FROM test_data WHERE id=? ORDER BY id ASC;")) ;; event_time DESC,id ASC;
    (db:with-db
     dbstruct
     #f 
     #f
     (lambda (db)
       (let* ((stmth (db:get-cache-stmth dbstruct db stmt))
     (lambda (dbdat db)
       (let* ((stmth (db:get-cache-stmth dbdat #f db stmt))
	      (res   (sqlite3:fold-row
		      (lambda (res id test-id  category variable value expected tol units comment status type last-update)
			(vector id test-id  category variable value expected tol units comment status type last-update))
		      (vector #f #f #f #f #f #f #f #f #f #f #f #f)
		      stmth
		      test-data-id)))
        res)))))

;; WARNING: Do NOT call this for the parent test on an iterated test
;; Roll up test_data pass/fail results
;; look at the test_data status field, 
;;    if all are pass (any case) and the test status is PASS or NULL or '' then set test status to PASS.
;;    if one or more are fail (any case) then set test status to PASS, non "pass" or "fail" are ignored
(define (db:test-data-rollup dbstruct run-id test-id status)
  (let* ((fail-count 0)
	 (pass-count 0))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     dbstruct run-id #f
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (fcount pcount)
	  (set! fail-count fcount)
	  (set! pass-count pcount))
	db 
	"SELECT (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'fail') AS fail_count,
             (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'pass') AS pass_count;"
	test-id test-id)
       ;; Now rollup the counts to the central megatest.db
       (db:general-call dbstruct 'pass-fail-counts (list pass-count fail-count test-id))
       (db:general-call dbstruct run-id 'pass-fail-counts (list pass-count fail-count test-id))
       ;; if the test is not FAIL then set status based on the fail and pass counts.
       (db:general-call dbstruct 'test_data-pf-rollup (list test-id test-id test-id test-id))))))
       (db:general-call dbstruct run-id 'test_data-pf-rollup (list test-id test-id test-id test-id))))))

;; each section is a rule except "final" which is the final result
;;
;; [rule-5]
;; operator in
;; section LogFileBody
;; desc Output voltage

;; faz,bar,    10,  8mA,     ,     ,"this is a comment"
;; EOF

(define (db:csv->test-data dbstruct run-id test-id csvdata)
  (debug:print 4 *default-log-port* "test-id " test-id ", csvdata: " csvdata)
  (db:with-db
   dbstruct #f #f
   (lambda (db)
   (lambda (dbdat db)
     (let* ((csvlist (csv->list (make-csv-reader
				 (open-input-string csvdata)
				 '((strip-leading-whitespace? #t)
				   (strip-trailing-whitespace? #t)))))) ;; (csv->list csvdata)))
       (for-each
	(lambda (csvrow)
	  (let* ((padded-row  (take (append csvrow (list #f #f #f #f #f #f #f #f #f)) 9))

;; This routine moved from tdb.scm, tdb:read-test-data
;;
(define (db:read-test-data dbstruct run-id test-id categorypatt)
  (let* ((res '()))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (id test_id category variable value expected tol units comment status type)
	  (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	db
	"SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
       (reverse res)))))

;; This routine moved from tdb.scm, :read-test-data
;;
(define (db:read-test-data-varpatt dbstruct run-id test-id categorypatt varpatt)
  (let* ((res '()))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (id test_id category variable value expected tol units comment status type)
	  (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	db
	"SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? AND variable LIKE ? ORDER BY category,variable;" test-id categorypatt varpatt)
       (reverse res)))))


;;======================================================================
;; Misc. test related queries
;;======================================================================

(define (db:get-run-ids-matching-target dbstruct keynames target res runname testpatt statepatt statuspatt)
  (db:with-db
   dbstruct #f #f
   (lambda (db)
   (lambda (dbdat db)
     (let* ((row-ids '())
	    (keystr (string-intersperse 
		     (map (lambda (key val)
			    (conc key " like '" val "'"))
			  keynames 
			  (string-split target "/"))
		     " AND "))

(define (db:test-get-paths-matching-keynames-target-new dbstruct run-id keynames target res testpatt statepatt statuspatt runname)
  (let* ((testqry (tests:match->sqlqry testpatt))
	 (tstsqry (conc "SELECT rundir FROM tests WHERE run_id=? AND " testqry " AND state LIKE '" statepatt "' AND status LIKE '" statuspatt "' ORDER BY event_time ASC;")))
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (p)
	  (set! res (cons p res)))
	db
	tstsqry
	run-id)
       res))))

(define (db:test-toplevel-num-items dbstruct run-id testname)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let ((res 0))
       (sqlite3:for-each-row
	(lambda (num-items)
	  (set! res num-items))
	db
	"SELECT count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND state NOT IN ('DELETED');"
	run-id

	   msg))) ;; crude reply for when things go awry
    ((zmq nmsg)(with-input-from-string msg (lambda ()(deserialize))))
    (else msg))) ;; rpc

;; ; This is to be the big daddy call NOPE: Replaced by db:set-state-status-and-roll-up-items
;; ;
;; define (db:test-set-state-status dbstruct run-id test-id state status msg)
;;  (let ((dbdat  (db:get-db dbstruct run-id)))
;;  (let ((dbdat  (db:get-subdb dbstruct run-id)))
;;    (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
;; 	(db:general-call dbdat 'set-test-start-time (list test-id)))
;;    ;; (if msg
;;    ;; 	(db:general-call dbdat 'state-status-msg (list state status msg test-id))
;;    ;; 	(db:general-call dbdat 'state-status     (list state status test-id)))
;;    (db:set-state-status-and-roll-up-items dbstruct run-id test-id #f state status msg)
;;    ;; process the test_data table
;;    (if (and test-id state status (equal? status "AUTO")) 
;; 	(db:test-data-rollup dbstruct run-id test-id status))
;;    (mt:process-triggers dbstruct run-id test-id state status)))

;; state is the priority rollup of all states
;; status is the priority rollup of all completed statesfu
;;
;; if test-name is an integer work off that instead of test-name test-path
;; if test-name is an integer work off that as test-id instead of test-name test-path
;;
(define (db:set-state-status-and-roll-up-items dbstruct run-id test-name item-path state status comment)
  ;; establish info on incoming test followed by info on top level test
  ;; BBnote - for mode itemwait, linkage between upstream test & matching item status is propagated to run queue in db:prereqs-not-met
  (let* ((testdat      (if (number? test-name)
			   (db:get-test-info-by-id dbstruct run-id test-name) ;; test-name is actually a test-id
			   (db:get-test-info       dbstruct run-id test-name item-path)))
	 (test-id      (db:test-get-id testdat))
	 (test-name    (if (number? test-name)
			   (db:test-get-testname testdat)
			   test-name))
	 (item-path    (db:test-get-item-path testdat))
         (tl-testdat   (db:get-test-info dbstruct run-id test-name ""))
         (tl-test-id   (if tl-testdat
			   (db:test-get-id tl-testdat)
			   #f)))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART")) 
	(db:general-call dbstruct 'set-test-start-time (list test-id)))
	(db:general-call dbstruct run-id 'set-test-start-time (list test-id)))
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     dbstruct run-id #f
     (lambda (dbdat db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                 ;; NB// Pass the db so it is part fo the transaction
                 (db:test-set-state-status db run-id test-id state status comment) ;; this call sets the item state/status
                 (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
                     (let* ((state-status-counts  (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path state status)) ;; item-path is used to exclude current state/status of THIS test
			      						  (state-stauses (db:roll-up-rules state-status-counts state status))
                          (newstate (car state-stauses))
                          (newstatus (cadr state-stauses)))
                     (let* ((state-status-counts  (db:get-all-state-status-counts-for-test db run-id test-name item-path state status)) ;; item-path is used to exclude current state/status of THIS test
			    (state-statuses        (db:roll-up-rules state-status-counts state status))
                          (newstate (car state-statuses))
                          (newstatus (cadr state-statuses)))
                       (debug:print 4 *default-log-port* "BB> tl-test-id="tl-test-id" ; "test-name":"item-path" newstate="newstate" newstatus="newstatus" len(sscs)="(length state-status-counts)  " state-status-counts: "
							(apply conc
                  (map (lambda (x)
                     (conc
                     		(with-output-to-string (lambda () (pp (dbr:counts->alist x)))) " | "))
                              state-status-counts))); end debug:print
   
                       (if tl-test-id
			   (db:test-set-state-status db run-id tl-test-id newstate newstatus #f)) ;; we are still in the transaction - must access the db and not the dbstruct
		       ))))))
         (mutex-unlock! *db-transaction-mutex*)
         (if (and test-id state status (equal? status "AUTO")) 
             (db:test-data-rollup dbstruct run-id test-id status))
         tr-res)))))

(define (db:roll-up-rules state-status-counts state status)
		(let* ((running     (length (filter (lambda (x)
                          (member (dbr:counts-state x) *common:running-states*))
                                 state-status-counts)))
           (bad-not-started      (length (filter (lambda (x)
                                      (and (equal? (dbr:counts-state x) "NOT_STARTED") 
                                        (not (member (dbr:counts-status x)  *common:not-started-ok-statuses*))))
																	state-status-counts)))
           (all-curr-states      (common:special-sort  ;; worst -> best (sort of)
                                    (delete-duplicates
                                      (if (and state (not (member state *common:dont-roll-up-states*)))
                                          (cons state (map dbr:counts-state state-status-counts))
                                          (map dbr:counts-state state-status-counts)))
                                                  *common:std-states* >))
           (all-curr-statuses    (common:special-sort  ;; worst -> best
                                    (delete-duplicates
                                      (if (and state status (not (member state *common:dont-roll-up-states*)))
                                          (cons status (map dbr:counts-status state-status-counts))
                                          (map dbr:counts-status state-status-counts)))
                                                   *common:std-statuses* >))
           (non-completes        (filter (lambda (x)
							 										 (not (member x (cons "COMPLETED" *common:dont-roll-up-states*))))
						       									all-curr-states))
			     (preq-fails        (filter (lambda (x)
							 								(equal? x "PREQ_FAIL"))
						       							all-curr-statuses))
           (num-non-completes (length non-completes))
 					 (newstate          (cond
															((> running 0)           "RUNNING")            ;; anything running, call the situation running
                              ((> (length preq-fails) 0) "NOT_STARTED")
															((> bad-not-started 0)   "COMPLETED")          ;; we have an ugly situation, it is completed in the sense we cannot do more.
															((> num-non-completes 0) (car non-completes))  ;;  (remove (lambda (x)(equal? "COMPLETED" x)) all-curr-states))) ;; only rollup DELETED if all DELETED
															(else                    (car all-curr-states))))
           (newstatus         (cond
                              ((> (length preq-fails) 0)  "PREQ_FAIL")
                              ((or (> bad-not-started 0)
                                   (and (equal? newstate "NOT_STARTED")
                                      (> num-non-completes 0)))
                                            "STARTED")
                              (else (car all-curr-statuses)))))
 					(debug:print-info 2 *default-log-port*
                                         "\n--> probe db:set-state-status-and-roll-up-items: "
                                         "\n--> state-status-counts: "(map dbr:counts->alist state-status-counts)
                                         "\n--> running:             "running
                                         "\n--> bad-not-started:     "bad-not-started
                                         "\n--> non-non-completes:   "num-non-completes
                                         "\n--> non-completes:       "non-completes
                                         "\n--> all-curr-states:     "all-curr-states
                                         "\n--> all-curr-statuses:     "all-curr-statuses
                                         "\n--> newstate              "newstate
                                         "\n--> newstatus            "newstatus
                                         "\n\n")

                        ;; NB// Pass the db so it is part of the transaction
         (list newstate newstatus)))
  (let* ((running     (length (filter (lambda (x)
					(member (dbr:counts-state x) *common:running-states*))
				      state-status-counts)))
	 (bad-not-started      (length (filter (lambda (x)
						 (and (equal? (dbr:counts-state x) "NOT_STARTED") 
						      (not (member (dbr:counts-status x)  *common:not-started-ok-statuses*))))
					       state-status-counts)))
	 (all-curr-states      (common:special-sort  ;; worst -> best (sort of)
				(delete-duplicates
				 (if (and state (not (member state *common:dont-roll-up-states*)))
				     (cons state (map dbr:counts-state state-status-counts))
				     (map dbr:counts-state state-status-counts)))
				*common:std-states* >))
	 (all-curr-statuses    (common:special-sort  ;; worst -> best
				(delete-duplicates
				 (if (and state status (not (member state *common:dont-roll-up-states*)))
				     (cons status (map dbr:counts-status state-status-counts))
				     (map dbr:counts-status state-status-counts)))
				*common:std-statuses* >))
	 (non-completes        (filter (lambda (x)
					 (not (member x (cons "COMPLETED" *common:dont-roll-up-states*))))
				       all-curr-states))
	 (preq-fails        (filter (lambda (x)
				      (equal? x "PREQ_FAIL"))
				    all-curr-statuses))
	 (num-non-completes (length non-completes))
	 (newstate          (cond
			     ((> running 0)           "RUNNING")            ;; anything running, call the situation running
			     ((> (length preq-fails) 0) "NOT_STARTED")
			     ((> bad-not-started 0)   "COMPLETED")          ;; we have an ugly situation, it is completed in the sense we cannot do more.
			     ((> num-non-completes 0) (car non-completes))  ;;  (remove (lambda (x)(equal? "COMPLETED" x)) all-curr-states))) ;; only rollup DELETED if all DELETED
			     (else                    (car all-curr-states))))
	 (newstatus         (cond
			     ((> (length preq-fails) 0)  "PREQ_FAIL")
			     ((or (> bad-not-started 0)
				  (and (equal? newstate "NOT_STARTED")
				       (> num-non-completes 0)))
			      "STARTED")
			     (else (car all-curr-statuses)))))
    (debug:print-info 2 *default-log-port*
		      "\n--> probe db:set-state-status-and-roll-up-items: "
		      "\n--> state-status-counts: "(map dbr:counts->alist state-status-counts)
		      "\n--> running:             "running
		      "\n--> bad-not-started:     "bad-not-started
		      "\n--> non-non-completes:   "num-non-completes
		      "\n--> non-completes:       "non-completes
		      "\n--> all-curr-states:     "all-curr-states
		      "\n--> all-curr-statuses:     "all-curr-statuses
		      "\n--> newstate              "newstate
		      "\n--> newstatus            "newstatus
		      "\n\n")
    
    ;; NB// Pass the db so it is part of the transaction
    (list newstate newstatus)))

(define (db:set-state-status-and-roll-up-run dbstruct run-id curr-state curr-status)
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     dbstruct run-id #f
     (lambda (dbdat db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                   (let* ((state-status-counts  (db:get-all-state-status-counts-for-run dbstruct run-id))
													(state-stauses (db:roll-up-rules state-status-counts #f #f ))
                          (newstate (car state-stauses))
                          (newstatus (cadr state-stauses))) 
                    (if (or (not (eq? newstate curr-state)) (not (eq?  newstatus curr-status)))
                   (db:set-run-state-status dbstruct run-id newstate newstatus )))))))
                   (let* ((state-status-counts (db:get-all-state-status-counts-for-run db run-id))
			  (state-statuses      (db:roll-up-rules state-status-counts #f #f ))
                          (newstate            (car state-statuses))
                          (newstatus           (cadr state-statuses))) 
		     (if (or (not (eq? newstate curr-state)) (not (eq?  newstatus curr-status)))
			 (db:set-run-state-status db run-id newstate newstatus )))))))
         (mutex-unlock! *db-transaction-mutex*)
         tr-res))))


(define (db:get-all-state-status-counts-for-run dbstruct run-id)
 (let* ((test-count-recs (db:with-db
                                  dbstruct #f #f
                                  (lambda (db)
                                  (lambda (dbdat db)
                                    (sqlite3:map-row
                                     (lambda (state status count)
                                        (make-dbr:counts state: state status: status count: count))
                                     db
                                     "SELECT state,status,count(id) FROM tests WHERE run_id=?  GROUP BY state,status;"
                                     run-id )))))
   test-count-recs))


;; BBnote: db:get-all-state-status-counts-for-test returns dbr:counts object aggregating state and status of items of a given test, *not including rollup state/status*
;;
;; NOTE: This is called within a transaction
;;
(define (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path item-state-in item-status-in)
  (let* ((test-info   (db:get-test-info dbstruct run-id test-name item-path))
         (item-state  (or item-state-in (db:test-get-state test-info))) 
         (item-status (or item-status-in (db:test-get-status test-info)))
         (other-items-count-recs (db:with-db
                                  dbstruct #f #f
                                  (lambda (db)
                                  dbstruct run-id #f
                                  (lambda (dbdat db)
                                    (sqlite3:map-row
                                     (lambda (state status count)
                                       (make-dbr:counts state: state status: status count: count))
                                     db
                                     ;; ignore current item because we have changed its value in the current transation so this select will see the old value.
                                     "SELECT state,status,count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND item_path !=? GROUP BY state,status;"
                                     run-id test-name item-path))))

;;    run-id test-name))

(define (db:test-get-logfile-info dbstruct run-id test-name)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
   (lambda (dbdat db)
     (let ((res #f))
       (sqlite3:for-each-row 
	(lambda (path final_logf)
	  ;; (let ((path       (sdb:qry 'getstr path-id))
	  ;;       (final_logf (sdb:qry 'getstr final_logf-id)))
	  (set! logf final_logf)
	  (set! res (list path final_logf))

   ((not (equal? megatest-version calling-version))
    (list #t (conc "Login warning due to mismatch megatest version: " calling-version ", " megatest-version)))
   
    (else
    (hash-table-set! *logged-in-clients* client-signature (current-seconds))
    '(#t "successful login"))))

(define (db:general-call dbstruct stmtname params)
(define (db:general-call dbstruct run-id stmtname params)
  ;; Why is db:lookup-query above not used here to get the query?
  (let ((query (let ((q (alist-ref (if (string? stmtname)
				       (string->symbol stmtname)
				       stmtname)
				   db:queries)))
 		 (if q (car q) #f))))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     dbstruct run-id #f
     (lambda (dbdat db)
       (apply sqlite3:execute db query params)
       #t))))

;; get a summary of state and status counts to calculate a rollup
;;
(define (db:get-state-status-summary dbstruct run-id testname)
  (let ((res   '()))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     dbstruct run-id #f
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (state status count)
	  (set! res (cons (vector state status count) res)))
	db
	"SELECT state,status,count(state) FROM tests WHERE run_id=? AND testname=? AND item_path='' GROUP BY state,status;"
	run-id testname)
       res))))

(define (db:get-latest-host-load dbstruct raw-hostname)
  (let* ((hostname (string-substitute "\\..*$" "" raw-hostname))
         (res  (cons -1 0)))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row
        (lambda (cpuload update-time)  (set! res (cons cpuload update-time)))
        db
        "SELECT tr.cpuload, tr.update_time FROM test_rundat tr, tests t WHERE t.host=? AND tr.cpuload != -1  AND tr.test_id=t.id ORDER BY tr.update_time DESC LIMIT 1;"
        hostname))) res ))

(define (db:set-top-level-from-items dbstruct run-id testname)

	 (selstr  (string-intersperse keys ","))
	 (qrystr  (string-intersperse (map (lambda (x)(conc x "=?")) keys) " AND "))
	 (keyvals #f)
	 (tests-hash (make-hash-table)))
    ;; first look up the key values from the run selected by run-id
    (db:with-db
     dbstruct #f #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (a . b)
	  (set! keyvals (cons a b)))
	db
	(conc "SELECT " selstr " FROM runs WHERE id=? ORDER BY event_time DESC;") run-id)))
    (if (not keyvals)
	'()
	(let ((prev-run-ids '()))
	  (db:with-db
	   dbstruct #f #f
	   (lambda (db)
	   (lambda (dbdat db)
	     (apply sqlite3:for-each-row
		    (lambda (id)
		      (set! prev-run-ids (cons id prev-run-ids)))
		    db
		    (conc "SELECT id FROM runs WHERE " qrystr " AND id != ?;") (append keyvals (list run-id)))))
	  ;; collect all matching tests for the runs then
	  ;; extract the most recent test and return that.

		      (loop (car tal)(cdr tal))))))))))

;; Function recursively checks if <db>.journal exists; if yes means db busy; call itself after delayed interval
;; return the sqlite3 db handle if possible
;; 
(define (db:delay-if-busy dbdat #!key (count 6))
  (if (not (configf:lookup *configdat* "server" "delay-on-busy")) 
      (and dbdat (db:dbdat-get-db dbdat))
      (and dbdat (dbr:dbdat-dbh dbdat))
      (if dbdat
	  (let* ((dbpath (db:dbdat-get-path dbdat))
		 (db     (db:dbdat-get-db   dbdat)) ;; we'll return this so (db:delay--if-busy can be called inline
	  (let* ((dbpath (dbr:dbdat-dbfile dbdat))
		 (db     (dbr:dbdat-dbh   dbdat)) ;; we'll return this so (db:delay--if-busy can be called inline
		 (dbfj   (conc dbpath "-journal")))
	    (if (handle-exceptions
		 exn
		 (begin
		   (debug:print-info 0 *default-log-port* "WARNING: failed to test for existance of " dbfj ", exn=" exn)
		   (thread-sleep! 1)
		   (db:delay-if-busy count (- count 1))) 

(define (db:test-get-records-for-index-file dbstruct run-id test-name)
  (let ((res '()))
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (id itempath state status run_duration logf comment)
	  (set! res (cons (vector id itempath state status run_duration logf comment) res)))
	db
	"SELECT id,item_path,state,status,run_duration,final_logf,comment FROM tests WHERE testname=? AND item_path != '' AND run_id=?;" ;; BUG! WHY NO run_id?
	test-name
	run-id)
       res))))

;;======================================================================
;; Tests meta data
;;======================================================================

;; returns a hash table of tags to tests
;;
(define (db:get-tests-tags dbstruct)
  (db:with-db
   dbstruct #f #f
   (lambda (db)
   (lambda (dbdat db)
     (let* ((res     (make-hash-table)))
       (sqlite3:for-each-row
	(lambda (testname tags-in)
	  (let ((tags (string-split tags-in ",")))
	    (for-each
	     (lambda (tag)
	       (hash-table-set! res tag

;; read the record given a testname
(define (db:testmeta-get-record dbstruct testname)
  (let ((res   #f))
    (db:with-db
     dbstruct
     #f
     #f
     (lambda (db)
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (id testname author owner description reviewed iterated avg_runtime avg_disk tags jobgroup)
	  (set! res (vector id testname author owner description reviewed iterated avg_runtime avg_disk tags jobgroup)))
	db
	"SELECT id,testname,author,owner,description,reviewed,iterated,avg_runtime,avg_disk,tags,jobgroup FROM test_meta WHERE testname=?;"
	testname)
       res))))

;; create a new record for a given testname
(define (db:testmeta-add-record dbstruct testname)
  (db:with-db dbstruct #f #f 
	      (lambda (db)
	      (lambda (dbdat db)
		(sqlite3:execute 
		 db
		 "INSERT OR IGNORE INTO test_meta (testname,author,owner,description,reviewed,iterated,avg_runtime,avg_disk,tags) VALUES (?,'','','','','','','','');" testname))))

;; update one of the testmeta fields
(define (db:testmeta-update-field dbstruct testname field value)
  (db:with-db dbstruct #f #f 
	      (lambda (db)
	      (lambda (dbdat db)
		(sqlite3:execute 
		 db
		 (conc "UPDATE test_meta SET " field "=? WHERE testname=?;") value testname))))

(define (db:testmeta-get-all dbstruct)
  (db:with-db dbstruct #f #f 
	      (lambda (db)
	      (lambda (dbdat db)
		(let ((res '()))
		  (sqlite3:for-each-row
		   (lambda (a . b)
		     (set! res (cons (apply vector a b) res)))
		   db
		   "SELECT id,testname,author,owner,description,reviewed,iterated,avg_runtime,avg_disk,tags,jobgroup FROM test_meta;")
		  res))))

;;======================================================================
;; To sync individual run
;;======================================================================
(define (db:get-run-record-ids dbstruct target run keynames test-patt)
(let ((backcons (lambda (lst item)(cons item lst))))
    (db:with-db
     dbstruct #f #f 
     (lambda (db)
     (lambda (dbdat db)
        (let* ((keystr (string-intersperse 
		     (map (lambda (key val)
			    (conc key " like '" val "'"))
			  keynames 
			  (string-split target "/"))
		     " AND "))
         (run-qry (conc "SELECT id FROM runs  WHERE " keystr  " and runname='" run"'"))

;;   '((runs . (1 2 3 ...))(steps . (5 6 7 ...) ...))
;;
(define (db:get-changed-record-ids dbstruct since-time)
  ;; no transaction, allow the db to be accessed between the big queries
  (let ((backcons (lambda (lst item)(cons item lst))))
    (db:with-db
     dbstruct #f #f 
     (lambda (db)
     (lambda (dbdat db)
       `((runs       . ,(sqlite3:fold-row backcons '() db "SELECT id FROM runs  WHERE last_update>=?" since-time))
	 (tests      . ,(sqlite3:fold-row backcons '() db "SELECT id FROM tests WHERE last_update>=?" since-time))
	 (test_steps . ,(sqlite3:fold-row backcons '() db "SELECT id FROM test_steps WHERE last_update>=?" since-time))
	 (test_data  . ,(sqlite3:fold-row backcons '() db "SELECT id FROM test_data  WHERE last_update>=?" since-time))
	 ;; (test_meta  . ,(fold-row backcons '() db "SELECT id FROM test_meta  WHERE last_update>?" since-time))
	 (run_stats  . ,(sqlite3:fold-row backcons '() db "SELECT id FROM run_stats  WHERE last_update>=?" since-time))
	 )))))

;;======================================================================
;; Extract ods file from the db
;;======================================================================

;; NOT REWRITTEN YET!!!!!

;; runspatt is a comma delimited list of run patterns
;; keypatt-alist must contain *all* keys with an associated pattern: '( ("KEY1" "%") .. )
(define (db:extract-ods-file dbstruct outputfile keypatt-alist runspatt pathmod)
  (assert #f "FATAL: call to db:extract-ods-file which is not ported yet.")
  (let* ((keysstr  (string-intersperse (map car keypatt-alist) ","))
	 (keyqry   (string-intersperse (map (lambda (p)(conc (car p) " LIKE ? ")) keypatt-alist) " AND "))
	 (numkeys  (length keypatt-alist))
	 (test-ids '())
	 (dbdat    (db:get-db dbstruct))
	 (db       (db:dbdat-get-db dbdat))
	 (dbdat    (db:get-subdb dbstruct))
	 (db       (dbr:dbdat-dbh dbdat))
	 (windows  (and pathmod (substring-index "\\" pathmod)))
	 (tempdir  (conc "/tmp/" (current-user-name) "/" runspatt "_" (random 10000) "_" (current-process-id)))
	 (runsheader (append (list "Run Id" "Runname") ; 0 1
			     (map car keypatt-alist)   ; + N = length keypatt-alist
			     (list "Testname"          ; 2
				   "Item Path"         ; 3 
				   "Description"       ; 4 

     results)
    ;; brutal clean up
    (stack-push! (dbr:dbstruct-dbstack dbstruct) dbdat)
    (system "rm -rf tempdir")))

;; (db:extract-ods-file db "outputfile.ods" '(("sysname" "%")("fsname" "%")("datapath" "%")) "%")

;;======================================================================
;; moving watch dogs here due to dependencies
;;======================================================================

;;======================================================================
;; currently the primary job of the watchdog is to run the sync back to megatest.db from the db in /tmp
;; if we are on the homehost and we are a server (by definition we are on the homehost if we are a server)
;;
(define (common:readonly-watchdog dbstruct)
  (thread-sleep! 0.05) ;; delay for startup
  (debug:print-info 13 *default-log-port* "common:readonly-watchdog entered.")
  ;; sync megatest.db to /tmp/.../megatst.db
  (let* ((sync-cool-off-duration   3)
        (golden-mtdb     (dbr:dbstruct-mtdb dbstruct))
        (golden-mtpath   (db:dbdat-get-path golden-mtdb))
        (tmp-mtdb        (dbr:dbstruct-tmpdb dbstruct))
        (tmp-mtpath      (db:dbdat-get-path tmp-mtdb)))
    (debug:print-info 0 *default-log-port* "Read-only periodic sync thread started.")
    (let loop ((last-sync-time 0))
      (debug:print-info 13 *default-log-port* "loop top tmp-mtpath="tmp-mtpath" golden-mtpath="golden-mtpath)
      (let* ((duration-since-last-sync (- (current-seconds) last-sync-time)))
        (debug:print-info 13 *default-log-port* "duration-since-last-sync="duration-since-last-sync)
        (if (and (not *time-to-exit*)
                 (< duration-since-last-sync sync-cool-off-duration))
            (thread-sleep! (- sync-cool-off-duration duration-since-last-sync)))
        (if (not *time-to-exit*)
            (let ((golden-mtdb-mtime (file-modification-time golden-mtpath))
                  (tmp-mtdb-mtime    (file-modification-time tmp-mtpath)))
	      (if (> golden-mtdb-mtime tmp-mtdb-mtime)
		  (if (< golden-mtdb-mtime (- (current-seconds) 3)) ;; file has NOT been touched in past three seconds, this way multiple servers won't fight to sync back
		      (let ((res (db:multi-db-sync dbstruct 'old2new)))
			(debug:print-info 13 *default-log-port* "rosync called, " res " records transferred."))))
              (loop (current-seconds)))
            #t)))
    (debug:print-info 0 *default-log-port* "Exiting readonly-watchdog timer, *time-to-exit* = " *time-to-exit*" pid="(current-process-id)" mtpath="golden-mtpath)))

;;======================================================================
;; TODO: for multiple areas, we will have multiple watchdogs; and multiple threads to manage
(define (common:watchdog)
  (debug:print-info 13 *default-log-port* "common:watchdog entered.")
  (if (launch:setup)
      (if (common:on-homehost?)
	  (let ((dbstruct (db:setup #t))) ;; (db:setup-db *dbstruct-dbs* *toppath* #f))) ;;  #t)))
	    (debug:print-info 13 *default-log-port* "after db:setup with dbstruct=" dbstruct)
	    (cond
	     ((dbr:dbstruct-read-only dbstruct)
	      (debug:print-info 13 *default-log-port* "loading read-only watchdog")
	      (common:readonly-watchdog dbstruct))
	     (else
	      (debug:print-info 13 *default-log-port* "loading writable-watchdog.")
              (let* ((syncer (or (configf:lookup *configdat* "server" "sync-method") "delta-sync"))) ;; "delta-sync"))) ;; "brute-force-sync")))
                (cond
                 ((equal? syncer "brute-force-sync")
                  (server:writable-watchdog-bruteforce dbstruct))
                 ((equal? syncer "delta-sync")
                  (server:writable-watchdog-deltasync dbstruct))
                 ((equal? syncer "copy-sync")
                  (server:writable-watchdog-copysync dbstruct))
                 (else
                  (debug:print-error 0 *default-log-port* "Unknown server/sync-method specified ("syncer") - valid values are copy-sync, brute-force-sync and delta-sync.")
                  (exit 1)))
                ;;(debug:print 1 *default-log-port* "INFO: ["(common:human-time)"] Syncer started (method="syncer")")
                )))
	    (debug:print-info 13 *default-log-port* "watchdog done."))
	  (debug:print-info 13 *default-log-port* "no need for watchdog on non-homehost"))))


(define (db:do-sync)
  (let* ((syncer (or (configf:lookup *configdat* "server" "sync-method") "delta-sync"))
    (dbstruct (db:setup #t)))

    (debug:print 0 *default-log-port* "db:do-sync: sync-method: " syncer)
    (cond
      ((equal? syncer "brute-force-sync")
       (db:run-lock-and-sync *no-sync-db*))
      ((equal? syncer "delta-sync")
       (debug:print 0 *default-log-port* "db:do-sync: db:multi-db-sync" )
       (let* (
	   (tmpdbpth (dbr:dbstruct-tmppath dbstruct))
	   (lockfile (conc tmpdbpth ".lock"))
	   (locked   (common:simple-file-lock lockfile)) 
	   (res      (if locked
			 (db:multi-db-sync 
			  dbstruct
			  'new2old)
			 #f)))
           (if res
	     (begin
	       (common:simple-file-release-lock lockfile)
	       (print "db:do-sync: Synced " res " records to megatest.db")
             )
	     (print "db:do-sync: Skipping sync, there is a sync in progress.")
           )
       )
      )
      ((equal? syncer "copy-sync")
       (db:run-lock-and-sync *no-sync-db*))
      (else
        (debug:print-error 0 *default-log-port* "Unknown server/sync-method specified ("syncer") - valid values are copy-sync, brute-force-sync and delta-sync.")
        (exit 1)
      )
    )
  )
)




(define (server:writable-watchdog-bruteforce dbstruct)
  (thread-sleep! 1) ;; delay for startup
  #;(let* ((do-a-sync  (server:get-bruteforce-syncer dbstruct))
         (final-sync (server:get-bruteforce-syncer dbstruct fork-to-background: #t persist-until-sync: #t)))
    (when (and (not (args:get-arg "-sync-to-megatest.db")) ;; conditions under which we do not run the sync
	       (args:get-arg "-server"))
      
      (let loop ()
	(do-a-sync)
        (if (not *time-to-exit*) (loop))) ;; keep going unless time to exit

      ;; time to exit, close the no-sync db here
      (final-sync)

      (if (common:low-noise-print 30)
	  (debug:print-info 0 *default-log-port* "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*" pid="(current-process-id)
			    ))))
 )


;; Get a lock from the no-sync-db for the from-db, then copy the from-db to the to-db, otherwise return #f

(define (db:lock-and-sync no-sync-db from-db to-db)
  (assert (not *db-sync-in-progress*) "FATAL: db:lock-and-sync called while a sync is in progress.")
  (let* ((lockdat  (db:no-sync-get-lock no-sync-db from-db))
	 (gotlock  (car lockdat))
	 (locktime (cdr lockdat)))
    (if gotlock
	(begin
	  (file-copy from-db to-db #t)
	  (db:no-sync-del! no-sync-db from-db)
	  #t)
        (begin
          (debug:print 0 *default-log-port* "could not get lock for " from-db " from no-sync-db")
	  #f
        ))))

;; sync for filesystem local db writes
;;
(define (db:run-lock-and-sync no-sync-db)
  (let* ((tmp-area       (common:get-db-tmp-area))
	 (dbfiles        (glob (conc tmp-area"/.db/*.db")))
	 (sync-durations (make-hash-table)))
    ;; (debug:print-info 0 *default-log-port* "lock-and-sync, dbfiles: "dbfiles)
    (for-each
     (lambda (file)
       (let* ((fname (conc (pathname-file file) ".db"))
	      (fulln (conc *toppath*"/.db/"fname))
	      (time1 (if (file-exists? file)
			 (file-modification-time file)
			 (begin
			   (debug:print-info 0 *default-log-port* "Sync - I do not see file "file)
			   1)))
	      (time2 (if (file-exists? fulln)
			 (file-modification-time fulln)
			 (begin
			   (debug:print-info 0 *default-log-port* "Sync - I do not see file "fulln)
			   0)))
	      (changed (> time1 time2))
	      (do-cp (cond
		      ((not (file-exists? fulln)) ;; shouldn't happen, but this might recover
		       (debug:print-info 0 *default-log-port* "File "fulln" not found! Copying "fname" to "fulln)
		       #t)
		      (changed ;; (and changed
		       ;; (> (- (current-seconds) time1) 3)) ;; if file is changed and three seconds have passed.
		       #t)
		      ((and changed *time-to-exit*) ;; last copy
		       #t)
		      (else
		       #f))))
	 (if do-cp
	     (let* ((start-time (current-milliseconds)))
	       (debug:print-info 0 *default-log-port* "sync copy file: " fname", delta: " (- time1 time2) " seconds")
	       (db:lock-and-sync no-sync-db file fulln)
	       (hash-table-set! sync-durations (conc fname".db") (- (current-milliseconds) start-time)))
	     #;(debug:print-info 0 *default-log-port* "skipping sync..."))))
     dbfiles)
    (hash-table->alist sync-durations)))

;; straight forward copy based sync
;;  1. for each .db fil
;;  2. next if file changed since last sync cycle
;;  2. next if time delta /tmp file to MTRA less than 3 seconds
;;  3. get a lock for the file in nosyncdb
;;  4. copy the file
;;  5. when copy is done release the lock
;;
;;  DONE
(define (server:writable-watchdog-copysync dbstruct)
  (thread-sleep! 0.05) ;; delay for startup
  (let ((legacy-sync        (common:run-sync?))
	(sync-stale-seconds (configf:lookup-number *configdat* "server" "sync-stale-seconds" default: 300))
 	(debug-mode         (debug:debug-mode 1))
 	(last-time          (current-seconds))     ;; last time through the sync loop
 	(no-sync-db         (db:open-no-sync-db))
 	(sync-duration      0)  ;; run time of the sync in milliseconds
	(tmp-area           (common:get-db-tmp-area)))
    ;; Sync moved to http-transport keep-running loop
    (set! *no-sync-db* no-sync-db) ;; make the no sync db available to api calls
    (debug:print-info 2 *default-log-port* "Periodic copy-based sync thread started. syncer is copy-sync, tmp-area is " tmp-area)
    (debug:print-info 3 *default-log-port* "watchdog starting. syncer is copy-sync pid="(current-process-id));;  " this-wd-num="this-wd-num)
    
    (if (and legacy-sync (not *time-to-exit*))
 	(begin
 	  (debug:print-info 0 *default-log-port* "Server running, periodic copy-based sync started.")
	  (let loop ()

	    ;; run the sync and print out durations
	    (debug:print-info 0 *default-log-port* "Sync durations: "(db:run-lock-and-sync no-sync-db))
	    ;; keep going unless time to exit
	    ;;
	    (if (not *time-to-exit*)
		(let delay-loop ((count 0))
		  ;;(debug:print-info 13 *default-log-port* "delay-loop top; count="count" pid="(current-process-id)" this-wd-num="this-wd-num" *time-to-exit*="*time-to-exit*)
		  
		  (if (and (not *time-to-exit*)
			   (< count 6)) ;; was 11, changing to 4. 
		      (begin
			(thread-sleep! 1)
			(delay-loop (+ count 1))))
		  (if (not *time-to-exit*) (loop))))
	    
	    ;; ==> 	       ;; time to exit, close the no-sync db here
	    ;; ==> 	       (db:no-sync-close-db no-sync-db stmt-cache)
	    (if (common:low-noise-print 30)
		(debug:print-info 0 *default-log-port* "Exiting watchdog timer, *time-to-exit* = "
				  *time-to-exit*" pid="(current-process-id) )))))))

(define (server:writable-watchdog-deltasync dbstruct)
  ;; This is awful complex and convoluted. Plan to redo?
  ;; for now ... skip it.
 
  (thread-sleep! 0.05) ;; delay for startup
  (let ((legacy-sync  (common:run-sync?)))
       (sync-stale-seconds (configf:lookup-number *configdat* "server" "sync-stale-seconds" default: 300))
 	(debug-mode   (debug:debug-mode 1))
 	(last-time    (current-seconds))
 	(no-sync-db   (db:open-no-sync-db))
 	(stmt-cache   #f) ;; (dbr:dbstruct-stmt-cache dbstruct))
 	(sync-duration 0) ;; run time of the sync in milliseconds
       (subdbs       (hash-table-values (dbr:dbstruct-subdbs dbstruct))))
   (set! *no-sync-db* no-sync-db) ;; make the no sync db available to api calls
   (debug:print-info 2 *default-log-port* "Periodic sync thread started.")
   (debug:print-info 3 *default-log-port* "watchdog starting. legacy-sync is " legacy-sync" pid="(current-process-id)  );;  " this-wd-num="this-wd-num)
   
   (if (and legacy-sync (not *time-to-exit*))
 	(begin
 	  (debug:print-info 0 *default-log-port* "Server running, periodic sync started.")
	  (let loop ()
 	    ;; sync for filesystem local db writes
 	    ;;
 	    (mutex-lock! *db-multi-sync-mutex*)
 	       (let* ((start-file (conc tmp-area "/.start-sync"))
 		      (end-file   (conc tmp-area "/.end-sync"))
 			      
 		      (need-sync        (>= *db-last-access* *db-last-sync*)) ;; no sync since last write
 		      (sync-in-progress *db-sync-in-progress*)
 		      (min-intersync-delay (configf:lookup-number *configdat* "server" "minimum-intersync-delay" default: 5))
 		      (should-sync      (and (not *time-to-exit*)
 					     (> (- (current-seconds) *db-last-sync*) min-intersync-delay))) ;; sync every five seconds minimum, deprecated logic, can probably be removed
 		      (start-time       (current-seconds))
 		      (cpu-load-adj     (alist-ref 'adj-proc-load (common:get-normalized-cpu-load #f)))
 		      (mt-mod-time      (file-modification-time mtpath))
 		      (last-sync-start  (if (common:file-exists? start-file)
 					    (file-modification-time start-file)
 					    0))
 		      (last-sync-end    (if (common:file-exists? end-file)
 					    (file-modification-time end-file)
 					    10))
 		      (sync-period      (+ 3 (* cpu-load-adj 30))) ;; as adjusted load increases increase the sync period
 		      (recently-synced  (and (< (- start-time mt-mod-time) sync-period) ;; not useful if sync didn't modify megatest.db!
 					     (< mt-mod-time last-sync-start)))
 		      (sync-done        (<= last-sync-start last-sync-end))
 		      (sync-stale       (> start-time (+ last-sync-start sync-stale-seconds)))
 		      (will-sync        (and (not *time-to-exit*)       ;; do not start a sync if we are in the process of exiting
 					     (or need-sync should-sync)
 					     (or sync-done sync-stale)
 					     (not sync-in-progress)
 					     (not recently-synced))))
 		 (debug:print-info 13 *default-log-port* "WD writable-watchdog top of loop.  need-sync="need-sync" sync-in-progress=" sync-in-progress
 				   " should-sync="should-sync" start-time="start-time" mt-mod-time="mt-mod-time" recently-synced="recently-synced" will-sync="will-sync
 				   " sync-done=" sync-done " sync-period=" sync-period)
 		 (if (and (> sync-period 5)
 			  (common:low-noise-print 30 "sync-period"))
 		     (debug:print-info 0 *default-log-port* "Increased sync period due to long sync times, sync took: " sync-period " seconds."))
 		 ;; (if recently-synced (debug:print-info 0 *default-log-port* "Skipping sync due to recently-synced flag=" recently-synced))
 		 ;; (debug:print-info 0 *default-log-port* "need-sync: " need-sync " sync-in-progress: " sync-in-progress " should-sync: " should-sync " will-sync: " will-sync)
 		 (if will-sync (set! *db-sync-in-progress* #t))
 		 (mutex-unlock! *db-multi-sync-mutex*)
 		 (if will-sync
 		     (let (;; (max-sync-duration  (configf:lookup-number *configdat* "server" "max-sync-duration")) ;; KEEPING THIS AVAILABLE BUT SHOULD NOT USE, I'M PRETTY SURE IT DOES NOT WORK!
 			   (sync-start         (current-milliseconds)))
 		       (with-output-to-file start-file (lambda ()(print (current-process-id))))
 		       
 		       ;; put lock here
 		       
 		       ;; (if (or (not max-sync-duration)
 		       ;;        (< sync-duration max-sync-duration)) ;; NOTE: db:sync-to-megatest.db keeps track of time of last sync and syncs incrementally
 
 		      ;;
 		     
 		       (for-each
 			(lambda (subdb)
 			  (let* (;;(dbstruct (db:setup))
 				 (mtdb       (dbr:subdb-mtdb subdb))
 				 (mtpath     (db:dbdat-get-path mtdb))
 				 (tmp-area   (common:get-db-tmp-area))
 				 (res        (db:sync-to-megatest.db dbstruct no-sync-db: no-sync-db))) ;; did we sync any data? If so need to set the db touched flag to keep the server alive
 			    (set! sync-duration (- (current-milliseconds) sync-start))
 			    (if (> res 0) ;; some records were transferred, keep the db alive
 				(begin
 				  (mutex-lock! *heartbeat-mutex*)
 				  (set! *db-last-access* (current-seconds))
 				  (mutex-unlock! *heartbeat-mutex*)
 				  (debug:print-info 0 *default-log-port* "sync called, " res " records transferred."))
 				(debug:print-info 2 *default-log-port* "sync called but zero records transferred")))
 			  )
 			subdbs)))
 		 
 		 (if will-sync
 		     (begin
 		       (mutex-lock! *db-multi-sync-mutex*)
 		       (set! *db-sync-in-progress* #f)
 		       (set! *db-last-sync* start-time)
 		       (with-output-to-file end-file (lambda ()(print (current-process-id))))
 		       
 		       ;; release lock here
 		       
 		       (mutex-unlock! *db-multi-sync-mutex*)))
 		 (if (and debug-mode
 			  (> (- start-time last-time) 60))
 		     (begin
 		       (set! last-time start-time)
 		       (debug:print-info 4 *default-log-port* "timestamp -> " (seconds->time-string (current-seconds)) ", time since start -> " (seconds->hr-min-sec (- (current-seconds) *time-zero*))))))
 	       
	       ;; keep going unless time to exit
	       ;;
	       (if (not *time-to-exit*)
		   (let delay-loop ((count 0))
		     ;;(debug:print-info 13 *default-log-port* "delay-loop top; count="count" pid="(current-process-id)" this-wd-num="this-wd-num" *time-to-exit*="*time-to-exit*)
		     
		     (if (and (not *time-to-exit*)
			      (< count 6)) ;; was 11, changing to 4. 
			 (begin
			   (thread-sleep! 1)
			   (delay-loop (+ count 1))))
		     (if (not *time-to-exit*) (loop))))
	       
;; 	       ;; time to exit, close the no-sync db here
;; 	       (db:no-sync-close-db no-sync-db stmt-cache)
	       (if (common:low-noise-print 30)
		   (debug:print-info 0 *default-log-port* "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*" pid="(current-process-id) )))) 
))


(define (std-exit-procedure)
  ;;(common:telemetry-log-close)
  (on-exit (lambda () 0))
  ;;(debug:print-info 13 *default-log-port* "std-exit-procedure called; *time-to-exit*="*time-to-exit*)
  (let ((no-hurry  (if *time-to-exit* ;; hurry up
		       #f
		       (begin
			 (set! *time-to-exit* #t)
			 #t))))
    (debug:print-info 4 *default-log-port* "starting exit process, finalizing databases.")
    (if (and no-hurry (debug:debug-mode 18))
	(rmt:print-db-stats))
    (let ((th1 (make-thread (lambda () ;; thread for cleaning up, give it five seconds
                              (if *dbstruct-dbs* (db:close-all *dbstruct-dbs*)) ;; one second allocated
			      (if *task-db*    
				  (let ((db (cdr *task-db*)))
				    (if (sqlite3:database? db)
					(begin
					  (sqlite3:interrupt! db)
					  (sqlite3:finalize! db #t)
					  ;; (vector-set! *task-db* 0 #f)
					  (set! *task-db* #f)))))
                              (http-client#close-all-connections!)
                              ;; (if (and *runremote*
                              ;;          (remote-conndat *runremote*))
                              ;;     (begin
                              ;;       (http-client#close-all-connections!))) ;; for http-client
                              (if (not (eq? *default-log-port* (current-error-port)))
                                  (close-output-port *default-log-port*))
			      (set! *default-log-port* (current-error-port))) "Cleanup db exit thread"))
	  (th2 (make-thread (lambda ()
			      (debug:print 4 *default-log-port* "Attempting clean exit. Please be patient and wait a few seconds...")
			      (if no-hurry
                                  (begin
                                    (thread-sleep! 5)) ;; give the clean up few seconds to do it's stuff
                                  (begin
      				  (thread-sleep! 2)))
      			      (debug:print 4 *default-log-port* " ... done")
      			      )
			    "clean exit")))
      (thread-start! th1)
      (thread-start! th2)
      (thread-join! th1)
      )
    )

  0)