Megatest

;;  R E C O R D S
;;======================================================================

;; each db entry is a pair ( db . dbfilepath )
;; I propose this record evolves into the area record
;;
(defstruct dbr:dbstruct 
  ;; (tmpdb       #f)
  (tmpdb       #f)
  (dbstack     #f) ;; stack for tmp db handles, do not initialize with a stack
  (mtdb        #f)
  (refndb      #f)
  (homehost    #f) ;; not used yet
  (on-homehost #f) ;; not used yet
  (read-only   #f)
  )                ;; goal is to converge on one struct for an area but for now it is too confusing
  

;; record for keeping state,status and count for doing roll-ups in
;; iterated tests
;;
(defstruct dbr:counts

;;     (filedb:get-path db id)))

;; NB// #f => return dbdir only
;;      (was planned to be;  zeroth db with name=main.db)
;; 
;; If run-id is #f return to create and retrieve the path where the db will live.
;;
(define (db:dbfile-path . junk) ;;  run-id)
  (let* ((dbdir           (common:get-db-tmp-area)))
(define db:dbfile-path common:get-db-tmp-area)
    (handle-exceptions
     exn
     (begin
       (debug:print-error 0 *default-log-port* "Couldn't create path to " dbdir)
       (exit 1))
     (if (not (directory? dbdir))(create-directory dbdir #t)))
    dbdir))

(define (db:set-sync db)
  (let ((syncprag (configf:lookup *configdat* "setup" "sychronous")))
    (sqlite3:execute db (conc "PRAGMA synchronous = " (or syncprag 0) ";")))) 

;; open an sql database inside a file lock
;; returns: db existed-prior-to-opening
;; RA => Returns a db handler; sets the lock if opened in writable mode
;;
;;(define *db-open-mutex* (make-mutex))

(define (db:lock-create-open fname initproc)
  (let* ((parent-dir   (or (pathname-directory fname)(current-directory))) ;; no parent? go local
         (raw-fname    (pathname-file fname))
	 (dir-writable (file-write-access? parent-dir))
	 (file-exists  (file-exists? fname))
	 (file-exists  (common:file-exists? fname))
	 (file-write   (if file-exists
			   (file-write-access? fname)
			   dir-writable )))
    ;;(mutex-lock! *db-open-mutex*) ;; tried this mutex, not clear it helped.
    (if file-write ;; dir-writable
	(condition-case
	(let (;; (lock    (obtain-dot-lock fname 1 5 10))
	      (db      (sqlite3:open-database fname)))
	  (sqlite3:set-busy-handler! db (make-busy-timeout 136000))
         (let* ((lockfname   (conc fname ".lock"))
                (readyfname  (conc parent-dir "/.ready-" raw-fname))
                (readyexists (common:file-exists? readyfname)))
           (if (not readyexists)
               (common:simple-file-lock-and-wait lockfname))
           (let ((db      (sqlite3:open-database fname)))
             (sqlite3:set-busy-handler! db (make-busy-timeout 136000))
	  ;; (db:set-sync db)
	  (sqlite3:execute db "PRAGMA synchronous = 0;")
	  (if (not file-exists)
	      (begin
		(if (string-match "^/tmp/.*" fname) ;; this is a file in /tmp
		    (sqlite3:execute db "PRAGMA journal_mode=WAL;")
		    (print "Creating " fname " in NON-WAL mode."))
		(initproc db)))
	  ;; (release-dot-lock fname)
	  db)
	(begin
	  (debug:print 2 *default-log-port* "WARNING: opening db in non-writable dir " fname)
	  (sqlite3:open-database fname))))) ;; )
             (sqlite3:execute db "PRAGMA synchronous = 0;")
             (if (not file-exists)
                 (begin
                   
                   (if (and (configf:lookup *configdat* "setup" "use-wal")
                            (string-match "^/tmp/.*" fname)) ;; this is a file in /tmp
                       (sqlite3:execute db "PRAGMA journal_mode=WAL;")
                       (debug:print 2 *default-log-port* "Creating " fname " in NON-WAL mode."))
                   (initproc db)))
             (if (not readyexists)
                 (begin
                   (common:simple-file-release-lock lockfname)
                   (with-output-to-file
                       readyfname
                     (lambda ()
                       (print "Ready at " 
                              (seconds->year-work-week/day-time 
                               (current-seconds)))))))
             db))
         (exn (io-error)  (debug:print 0 *default-log-port* "ERROR: i/o error with " fname ". Check permissions, disk space etc. and try again."))
         (exn (corrupt)   (debug:print 0 *default-log-port* "ERROR: database " fname " is corrupt. Repair it to proceed."))
         (exn (busy)      (debug:print 0 *default-log-port* "ERROR: database " fname " is locked. Try copying to another location, remove original and copy back."))
         (exn (permission)(debug:print 0 *default-log-port* "ERROR: database " fname " has some permissions problem."))
         (exn () (debug:print 0 *default-log-port* "ERROR: Unknown error with database " fname " message: " ((condition-property-accessor 'exn 'message) exn))))
        
	(condition-case
         (begin
           (debug:print 2 *default-log-port* "WARNING: opening db in non-writable dir " fname)
           (let ((db (sqlite3:open-database fname)))
             ;;(mutex-unlock! *db-open-mutex*)
             db))
         (exn (io-error)  (debug:print 0 *default-log-port* "ERROR: i/o error with " fname ". Check permissions, disk space etc. and try again."))
         (exn (corrupt)   (debug:print 0 *default-log-port* "ERROR: database " fname " is corrupt. Repair it to proceed."))
         (exn (busy)      (debug:print 0 *default-log-port* "ERROR: database " fname " is locked. Try copying to another location, remove original and copy back."))
         (exn (permission)(debug:print 0 *default-log-port* "ERROR: database " fname " has some permissions problem."))
         (exn () (debug:print 0 *default-log-port* "ERROR: Unknown error with database " fname " message: " ((condition-property-accessor 'exn 'message) exn))))
	)))






;; ;; This routine creates the db. It is only called if the db is not already opened
;; ;; 
;; (define (db:open-rundb dbstruct run-id #!key (attemptnum 0)(do-not-open #f)) ;;  (conc *toppath* "/megatest.db") (car *configinfo*)))
;;   (let* ((dbfile       (db:dbfile-path run-id)) ;; (conc toppath "/db/" run-id ".db"))
;;          (dbexists     (file-exists? dbfile))
;;          (dbexists     (common:file-exists? dbfile))
;;          (db           (db:lock-create-open dbfile (lambda (db)
;;                                                      (handle-exceptions
;;                                                       exn
;;                                                       (begin
;;                                                         ;; (release-dot-lock dbpath)
;;                                                         (if (> attemptnum 2)
;;                                                             (debug:print-error 0 *default-log-port* "tried twice, cannot create/initialize db for run-id " run-id ", at path " dbpath)

;;     (dbr:dbstruct-olddb-set!  dbstruct olddb)
;;     ;;; (mutex-unlock! *rundb-mutex*) ;;; why did we need a mutex on opening db's?
;;     (db:sync-tables db:sync-tests-only *megatest-db* db)
;;     db))

;; This routine creates the db if not already present. It is only called if the db is not already opened
;;
(define (db:open-db dbstruct #!key (areapath #f))
(define (db:open-db dbstruct #!key (areapath #f)(do-sync #t)) ;; TODO: actually use areapath
  (let ((tmpdb-stack (dbr:dbstruct-dbstack dbstruct))) ;; RA => Returns the first reference in dbstruct
    (if (stack? tmpdb-stack)
	(db:get-db tmpdb-stack) ;; get previously opened db (will create new db handle if all in the stack are already used
        (let* ((dbpath       (db:dbfile-path)) ;;  0))
               (dbexists     (file-exists? dbpath))
	       (dbfexists    (file-exists? (conc dbpath "/megatest.db")))
               (tmpdb        (db:open-megatest-db path: dbpath)) ;; lock-create-open dbpath db:initialize-main-db))
        (let* ((dbpath       (db:dbfile-path ))      ;; path to tmp db area
               (dbexists     (common:file-exists? dbpath))
	       (tmpdbfname   (conc dbpath "/megatest.db"))
	       (dbfexists    (common:file-exists? tmpdbfname))  ;; (conc dbpath "/megatest.db")))
               (mtdbexists   (common:file-exists? (conc *toppath* "/megatest.db")))
               
               (mtdb         (db:open-megatest-db))
               (mtdbpath     (db:dbdat-get-path mtdb))
               (tmpdb        (db:open-megatest-db path: dbpath)) ;; lock-create-open dbpath db:initialize-main-db))
               (refndb       (db:open-megatest-db path: dbpath name: "megatest_ref.db"))
               (write-access (file-write-access? dbpath)))
               (write-access (file-write-access? mtdbpath))
	       (mtdbmodtime  (if mtdbexists (common:lazy-sqlite-db-modification-time mtdbpath)   #f))
	       (tmpdbmodtime (if dbfexists  (common:lazy-sqlite-db-modification-time tmpdbfname) #f))
	       (modtimedelta (and mtdbmodtime tmpdbmodtime (- mtdbmodtime tmpdbmodtime))))
	  
          ;;(debug:print-info 13 *default-log-port* "db:open-db>> mtdbpath="mtdbpath" mtdbexists="mtdbexists" and write-access="write-access)
          (if (and dbexists (not write-access))
              (begin
              (set! *db-write-access* #f))
                (set! *db-write-access* #f)
                (dbr:dbstruct-read-only-set! dbstruct #t)))
          (dbr:dbstruct-mtdb-set!   dbstruct mtdb)
          (dbr:dbstruct-tmpdb-set!  dbstruct tmpdb)
          (dbr:dbstruct-dbstack-set! dbstruct (make-stack))
          (dbr:dbstruct-dbstack-set! dbstruct (make-stack)) ;; BB: why a stack?  Why would the number of db's be indeterminate?  Is this a legacy of 1.db 2.db .. ?
          (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb) ;; olddb is already a (cons db path)
          (dbr:dbstruct-refndb-set! dbstruct refndb)
          ;;	    (mutex-unlock! *rundb-mutex*)
          (if (and (not dbfexists)
                   write-access) ;; *db-write-access*) ;; did not have a prior db and do have write access
          (if (and  (or (not dbfexists)
			(and modtimedelta
			     (> modtimedelta 10))) ;; if db in tmp is over ten seconds older than the file in MTRA then do a sync back
		    do-sync)
	      (begin
		(debug:print 0 *default-log-port* "filling db " (db:dbdat-get-path tmpdb) " with data from " (db:dbdat-get-path mtdb))
		(db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb refndb tmpdb))
	      (debug:print 4 *default-log-port* " db, " (db:dbdat-get-path tmpdb) " already exists, not propogating data from " (db:dbdat-get-path mtdb)))
		(debug:print 1 *default-log-port* "filling db " (db:dbdat-get-path tmpdb) " with data \n    from " (db:dbdat-get-path mtdb) " mod time delta: " modtimedelta)
		(db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb refndb tmpdb)
                (debug:print-info 13 *default-log-port* "db:sync-all-tables-list done.")
                )
	      (debug:print 4 *default-log-port* " db, " (db:dbdat-get-path tmpdb) " already exists or fresh enough, not propogating data from\n     " (db:dbdat-get-path mtdb) " mod time delta: " modtimedelta) )
	  ;; (db:multi-db-sync dbstruct 'old2new))  ;; migrate data from megatest.db automatically
          tmpdb))))

;; Make the dbstruct, setup up auxillary db's and call for main db at least once
;;
;; called in http-transport and replicated in rmt.scm for *local* access. 
;;
(define (db:setup #!key (areapath #f))
  (or *dbstruct-db*
      (if (common:on-homehost?)
	  (let* ((dbstruct (make-dbr:dbstruct)))
	    (db:open-db dbstruct areapath: areapath)
	    (set! *dbstruct-db* dbstruct)
	    dbstruct)
	  (begin
	    (debug:print 0 *default-log-port* "ERROR: attempt to open database when not on homehost. Exiting. Homehost: " (common:get-homehost))
	    (exit 1)))))
(define (db:setup do-sync #!key (areapath #f))
  ;;
  (cond
   (*dbstruct-db* *dbstruct-db*);; TODO: when multiple areas are supported, this optimization will be a hazard
   (else ;;(common:on-homehost?)
    (debug:print-info 13 *default-log-port* "db:setup entered (first time, not cached.)")
    (let* ((dbstruct (make-dbr:dbstruct)))
      (when (not *toppath*)
        (debug:print-info 13 *default-log-port* "in db:setup, *toppath* not set; calling launch:setup")
        (launch:setup areapath: areapath))
      (debug:print-info 13 *default-log-port* "Begin db:open-db")
      (db:open-db dbstruct areapath: areapath do-sync: do-sync)
      (debug:print-info 13 *default-log-port* "Done db:open-db")
      (set! *dbstruct-db* dbstruct)
      ;;(debug:print-info 13 *default-log-port* "new dbstruct = "(dbr:dbstruct->alist dbstruct))
      dbstruct))))
   ;; (else
   ;;  (debug:print 0 *default-log-port* "ERROR: attempt to open database when not on homehost. Exiting. Homehost: " (common:get-homehost))
   ;;  (exit 1))))

;; Open the classic megatest.db file (defaults to open in toppath)
;;
;;   NOTE: returns a dbdat not a dbstruct!
;;
(define (db:open-megatest-db #!key (path #f)(name #f))
  (let* ((dbdir        (or path *toppath*))
  (let* ((dbpath       (conc (or path *toppath*) "/" (or name "megatest.db")))
	 (dbexists     (file-exists? dbpath))
         (dbpath       (conc  dbdir "/" (or name "megatest.db")))
	 (dbexists     (common:file-exists? dbpath))
	 (db           (db:lock-create-open dbpath
					    (lambda (db)
					      (db:initialize-main-db db)
					      (db:initialize-run-id-db db))))
                                              (db:initialize-main-db db)
					      ;;(db:initialize-run-id-db db)
					      )))
	 (write-access (file-write-access? dbpath)))
    (debug:print-info 13 *default-log-port* "db:open-megatest-db "dbpath)
    (if (and dbexists (not write-access))
	(set! *db-write-access* #f))
    (cons db dbpath)))

;; sync run to disk if touched
;;
(define (db:sync-touched dbstruct run-id #!key (force-sync #f))

      (mutex-unlock! *db-multi-sync-mutex*)
      (db:sync-tables (db:sync-all-tables-list dbstruct) update_info tmpdb refndb mtdb))
    (mutex-lock! *db-multi-sync-mutex*)
    (set! *db-last-sync* start-t)
    (set! *db-last-access* start-t)
    (mutex-unlock! *db-multi-sync-mutex*)
    (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb)))

(define (db:safely-close-sqlite3-db db #!key (try-num 3))
  (if (<= try-num 0)
      #f
      (handle-exceptions
	  exn
	  (begin
	    (thread-sleep! 3)
	    (sqlite3:interrupt! db)
	    (db:safely-close-sqlite3-db db try-num: (- try-num 1)))
	(if (sqlite3:database? db)
	    (begin
	      (sqlite3:finalize! db)
	      #t)
	    #f))))

;; close all opened run-id dbs
(define (db:close-all dbstruct)
  (if (dbr:dbstruct? dbstruct)
      (handle-exceptions
	  exn
      (begin
        ;; (db:sync-touched dbstruct 0 force-sync: #t) ;; NO. Do not do this here. Instead we rely on a server to be started when there are writes, even if the server itself is not going to be used as a server.
	  (begin
	    (debug:print 0 *default-log-port* "WARNING: Finalizing failed, "  ((condition-property-accessor 'exn 'message) exn))
	    (print-call-chain *default-log-port*))
	;; (db:sync-touched dbstruct 0 force-sync: #t) ;; NO. Do not do this here. Instead we rely on a server to be started when there are writes, even if the server itself is not going to be used as a server.
        (let ((tdbs (map db:dbdat-get-db 
                         (stack->list (dbr:dbstruct-dbstack dbstruct))))
              (mdb (db:dbdat-get-db (dbr:dbstruct-mtdb   dbstruct)))
              (rdb (db:dbdat-get-db (dbr:dbstruct-refndb dbstruct))))
          (map (lambda (db)
		 (db:safely-close-sqlite3-db db))
;; 		 (if (sqlite3:database? db)
          (map sqlite3:finalize! tdbs)
          (if mdb (sqlite3:finalize! mdb))
          (if rdb (sqlite3:finalize! rdb))))))
  
;; 		     (sqlite3:finalize! db)))
	       tdbs)
          (db:safely-close-sqlite3-db mdb)     ;; (if (sqlite3:database? mdb) (sqlite3:finalize! mdb))
          (db:safely-close-sqlite3-db rdb))))) ;; (if (sqlite3:database? rdb) (sqlite3:finalize! rdb))))))

;;   (let ((locdbs (dbr:dbstruct-locdbs dbstruct)))
;;     (if (hash-table? locdbs)
;; 	(for-each (lambda (run-id)
;; 		    (db:close-run-db dbstruct run-id))
;; 		  (hash-table-keys locdbs)))))

;; (define (db:open-inmem-db)

	 '("final_logf"     #f)
	 '("logdat"         #f)
	 '("run_duration"   #f)
	 '("comment"        #f)
	 '("event_time"     #f)
	 '("fail_count"     #f)
	 '("pass_count"     #f)
	 '("archived"       #f))
	 '("archived"       #f)
         '("last_update"    #f))
  (list "test_steps"
	 '("id"             #f)
	 '("test_id"        #f)
	 '("stepname"       #f)
	 '("state"          #f)
	 '("status"         #f)
	 '("event_time"     #f)
	 '("comment"        #f)
	 '("logfile"        #f))
	 '("logfile"        #f)
         '("last_update"    #f))
   (list "test_data"
	 '("id"             #f)
	 '("test_id"        #f)
	 '("category"       #f)
	 '("variable"       #f)
	 '("value"          #f)
	 '("expected"       #f)
	 '("tol"            #f)
	 '("units"          #f)
	 '("comment"        #f)
	 '("status"         #f)
	 '("type"           #f))))
	 '("type"           #f)
         '("last_update"    #f))))

;; needs db to get keys, this is for syncing all tables
;;
(define (db:sync-main-list dbstruct)
  (let ((keys  (db:get-keys dbstruct)))
    (list
     (list "keys"
	   '("id"        #f)
	   '("fieldname" #f)
	   '("fieldtype" #f))
     (list "metadat" '("var" #f) '("val" #f))
     (append (list "runs" 
		   '("id"  #f))
	     (map (lambda (k)(list k #f))
		  (append keys
			  (list "runname" "state" "status" "owner" "event_time" "comment" "fail_count" "pass_count" "contour"))))
			  (list "runname" "state" "status" "owner" "event_time" "comment" "fail_count" "pass_count" "contour" "last_update"))))
     (list "test_meta"
	   '("id"             #f)
	   '("testname"       #f)
	   '("owner"          #f)
	   '("description"    #f)
	   '("reviewed"       #f)
	   '("iterated"       #f)

	 (fname    (pathname-strip-directory dbpath))
	 (fnamejnl (conc fname "-journal"))
	 (tmpname  (conc fname "." (current-process-id)))
	 (tmpjnl   (conc fnamejnl "." (current-process-id))))
    (debug:print-error 0 *default-log-port* "" fname " appears corrupted. Making backup \"old/" fname "\"")
    (system (conc "cd " dbdir ";mkdir -p old;cat " fname " > old/" tmpname))
    (system (conc "rm -f " dbpath))
    (if (file-exists? fnamejnl)
    (if (common:file-exists? fnamejnl)
	(begin
	  (debug:print-error 0 *default-log-port* "" fnamejnl " found, moving it to old dir as " tmpjnl)
	  (system (conc "cd " dbdir ";mkdir -p old;cat " fnamejnl " > old/" tmpjnl))
	  (system (conc "rm -f " dbdir "/" fnamejnl))))
    ;; attempt to recreate database
    (system (conc "cd " dbdir ";sqlite3 old/" tmpname " .dump | sqlite3 " fname))))
    

(define (db:sync-tables tbls last-update fromdb todb . slave-dbs)
  (handle-exceptions
   exn
   (begin
     (debug:print 0 *default-log-port* "EXCEPTION: database probably overloaded or unreadable in db:sync-tables.")
     (print-call-chain (current-error-port))
     (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
     (print "exn=" (condition->list exn))
     (debug:print 5 *default-log-port* "exn=" (condition->list exn))
     (debug:print 0 *default-log-port* " status:  " ((condition-property-accessor 'sqlite3 'status) exn))
     (debug:print 0 *default-log-port* " src db:  " (db:dbdat-get-path fromdb))
     (for-each (lambda (dbdat)
		 (let ((dbpath (db:dbdat-get-path dbdat)))
		   (debug:print 0 *default-log-port* " dbpath:  " dbpath)
		   (if (not (db:repair-db dbdat))
		       (begin
			 (debug:print-error 0 *default-log-port* "Failed to rebuild " dbpath ", exiting now.")
			 (exit)))))
	       (cons todb slave-dbs))
     
     0)
   ;; this is the work to be done
   (cond
    ((not fromdb) (debug:print 3 *default-log-port* "WARNING: db:sync-tables called with fromdb missing") -1)
    ((not todb)   (debug:print 3 *default-log-port* "WARNING: db:sync-tables called with todb missing") -2)
    ((not fromdb) (debug:print 3 *default-log-port* "WARNING: db:sync-tables called with fromdb missing")
     -1)
    ((not todb)   (debug:print 3 *default-log-port* "WARNING: db:sync-tables called with todb missing")
     -2)
    ((not (sqlite3:database? (db:dbdat-get-db fromdb)))
     (debug:print-error 0 *default-log-port* "db:sync-tables called with fromdb not a database " fromdb) -3)
     (debug:print-error 0 *default-log-port* "db:sync-tables called with fromdb not a database " fromdb)
     -3)
    ((not (sqlite3:database? (db:dbdat-get-db todb)))
     (debug:print-error 0 *default-log-port* "db:sync-tables called with todb not a database " todb) -4)
     (debug:print-error 0 *default-log-port* "db:sync-tables called with todb not a database " todb)
     -4)

    ((not (file-write-access? (db:dbdat-get-path todb)))
     (debug:print-error 0 *default-log-port* "db:sync-tables called with todb not a read-only database " todb)
     -5)
    ((not (null? (let ((readonly-slave-dbs
                        (filter
                         (lambda (dbdat)
                           (not (file-write-access? (db:dbdat-get-path todb))))
                         slave-dbs)))
                   (for-each
                    (lambda (bad-dbdat)
                      (debug:print-error
                       0 *default-log-port* "db:sync-tables called with todb not a read-only database " bad-dbdat))
                    readonly-slave-dbs)
                   readonly-slave-dbs))) -6)
    (else
     (let ((stmts       (make-hash-table)) ;; table-field => stmt
	   (all-stmts   '())              ;; ( ( stmt1 value1 ) ( stml2 value2 ))
	   (numrecs     (make-hash-table))
	   (start-time  (current-milliseconds))
	   (tot-count   0))
       (for-each ;; table
	(lambda (tabledat)
	  (let* ((tablename  (car tabledat))
		 (fields     (cdr tabledat))
		 (use-last-update  (if last-update
				       (if (pair? last-update)
					   (member (car last-update)    ;; last-update field name
						   (map car fields))
					   (begin
					     (debug:print 0 *default-log-port* "ERROR: parameter last-update for db:sync-tables must be a pair, received: " last-update) ;; found in fields
					     #f))
				       #f))
	  (let* ((tablename        (car tabledat))
		 (fields           (cdr tabledat))
		 (has-last-update  (member "last_update" fields))
		 (use-last-update  (cond
				    ((and has-last-update
					  (member "last_update" fields))
				     #t) ;; if given a number, just use it for all fields
				    ((number? last-update) #f) ;; if not matched first entry then ignore last-update for this table
				    ((and (pair? last-update)
					  (member (car last-update)    ;; last-update field name
						  (map car fields))) #t)
				    (last-update
				     (debug:print 0 *default-log-port* "ERROR: parameter last-update for db:sync-tables must be a pair or a number, received: " last-update) ;; found in fields
				     #f)
				    (else
				     #f)))
		 (last-update-value (if use-last-update ;; no need to check for has-last-update - it is already accounted for
					(if (number? last-update)
					    last-update
					    (cdr last-update))
					#f))
		 (last-update-field (if use-last-update
					(if (number? last-update)
					    "last_update"
					    (car last-update))
					#f))
		 (num-fields (length fields))
		 (field->num (make-hash-table))
		 (num->field (apply vector (map car fields)))
		 (full-sel   (conc "SELECT " (string-intersperse (map car fields) ",") 
				   " FROM " tablename (if use-last-update ;; apply last-update criteria
							  (conc " " (car last-update) ">=" (cdr last-update))
							  (conc " WHERE " last-update-field " >= " last-update-value)
							  "")
				   ";"))
		 (full-ins   (conc "INSERT OR REPLACE INTO " tablename " ( " (string-intersperse (map car fields) ",") " ) "
				   " VALUES ( " (string-intersperse (make-list num-fields "?") ",") " );"))
		 (fromdat    '())
		 (fromdats   '())
		 (totrecords 0)
		 (batch-len  (string->number (or (configf:lookup *configdat* "sync" "batchsize") "10")))
		 (batch-len  (string->number (or (configf:lookup *configdat* "sync" "batchsize") "100")))
		 (todat      (make-hash-table))
		 (count      0))

	    ;; set up the field->num table
	    (for-each
	     (lambda (field)
	       (hash-table-set! field->num field count)

                              count  INTEGER,
                              last_update INTEGER DEFAULT (strftime('%s','now')))")
  (sqlite3:execute maindb "CREATE TRIGGER  IF NOT EXISTS update_run_stats_trigger AFTER UPDATE ON run_stats
                             FOR EACH ROW
                               BEGIN 
                                 UPDATE run_stats SET last_update=(strftime('%s','now'))
                                   WHERE id=old.id;
                               END;"))
                               END;")
  (sqlite3:execute maindb "CREATE TABLE IF NOT EXISTS test_rundat (
                              id           INTEGER PRIMARY KEY,
                              test_id      INTEGER,
                              update_time  TIMESTAMP,
                              cpuload      INTEGER DEFAULT -1,
                              diskfree     INTEGER DEFAULT -1,
                              diskusage    INTGER DEFAULT -1,
                              run_duration INTEGER DEFAULT 0);"))

(define (db:adj-target db)
  (let ((fields    (configf:get-section *configdat* "fields"))
	(field-num 0))
    ;; because we will be refreshing the keys table it is best to clear it here
    (sqlite3:execute db "DELETE FROM keys;")
    (for-each
     (lambda (field)
       (let ((column (car field))
	     (spec   (cadr field)))
	 (handle-exceptions
	  exn
	  (if (string-match ".*duplicate.*" ((condition-property-accessor 'exn 'message) exn))
	      (debug:print 0 *default-log-port* "Target field " column " already exists in the runs table")
	      (db:general-sqlite-error-dump exn "alter table runs ..." #f "none"))
	  ;; Add the column if needed
	  (sqlite3:execute
	   db
	   (conc "ALTER TABLE runs ADD COLUMN " column " " spec)))
	 ;; correct the entry in the keys column
	 (sqlite3:execute
	  db
	  "INSERT INTO keys (id,fieldname,fieldtype) VALUES (?,?,?);"
	  field-num column spec)
	 ;; fill in blanks (not allowed as it would be part of the path
	 (sqlite3:execute
	  db
	  (conc "UPDATE runs SET " column "='x' WHERE " column "='';"))
	 (set! field-num (+ field-num 1))))
     fields)))
  
(define *global-db-store* (make-hash-table))

(define (db:get-access-mode)
  (if (args:get-arg "-use-db-cache") 'cached 'rmt))

;; Add db direct
;;

;; return the target db handle so it can be used
;;
(define (db:cache-for-read-only source target #!key (use-last-update #f))
  (if (and (hash-table-ref/default *global-db-store* target #f)
	   (>= (file-modification-time target)(file-modification-time source)))
      (hash-table-ref *global-db-store* target)
      (let* ((toppath   (launch:setup))
	     (targ-db-last-mod (if (file-exists? target)
	     (targ-db-last-mod (if (common:file-exists? target)
				   (file-modification-time target)
				   0))
	     (cache-db  (or (hash-table-ref/default *global-db-store* target #f)
			    (db:open-megatest-db path: target)))
	     (source-db (db:open-megatest-db path: source))
	     (curr-time (current-seconds))
	     (res      '())
	     (last-update (if use-last-update (cons "last_update" targ-db-last-mod) #f)))
	(db:sync-tables (db:sync-main-list source-db) last-update source-db cache-db)
	(db:sync-tables db:sync-tests-only last-update source-db cache-db)
	(hash-table-set! *global-db-store* target cache-db)
	cache-db)))

;; call a proc with a cached db
;;
(define (db:call-with-cached-db proc . params)
  ;; first cache the db in /tmp
  (let* ((cname-part (conc "megatest_cache/" (common:get-testsuite-name)))
	 (fname      (conc  (common:get-area-path-signature) ".db"))
	 (cache-dir  (common:get-create-writeable-dir
		      (list (conc "/tmp/" (current-user-name) "/" cname-part)
			    (conc "/tmp/" (current-user-name) "-" cname-part)
			     (conc "/tmp/" (current-user-name) "_" cname-part))))
	 (megatest-db (conc *toppath* "/megatest.db")))
    ;; (debug:print-info 0 *default-log-port* "Using cache dir " cache-dir)
    (if (not cache-dir)
	(begin
	  (debug:print 0 *default-log-port* "ERROR: Failed to find an area to write the cache db")
	  (exit 1))
	(let* ((th1      (make-thread
			  (lambda ()
			    (if (and (file-exists? megatest-db)
				     (file-write-access? megatest-db))
				(begin
				  (common:sync-to-megatest.db 'timestamps) ;; internally mutexes on *db-local-sync*
				  (debug:print-info 2 *default-log-port* "Done syncing to megatest.db"))))
			  "call-with-cached-db sync-to-megatest.db"))
	       (cache-db (db:cache-for-read-only
			  megatest-db
			  (conc cache-dir "/" fname)
			  use-last-update: #t)))
	  (thread-start! th1)
	  (apply proc cache-db params)
	  ))))
;; ;; call a proc with a cached db
;; ;;
;; (define (db:call-with-cached-db proc . params)
;;   ;; first cache the db in /tmp
;;   (let* ((cname-part (conc "megatest_cache/" (common:get-testsuite-name)))
;; 	 (fname      (conc  (common:get-area-path-signature) ".db"))
;; 	 (cache-dir  (common:get-create-writeable-dir
;; 		      (list (conc "/tmp/" (current-user-name) "/" cname-part)
;; 			    (conc "/tmp/" (current-user-name) "-" cname-part)
;; 			     (conc "/tmp/" (current-user-name) "_" cname-part))))
;; 	 (megatest-db (conc *toppath* "/megatest.db")))
;;     ;; (debug:print-info 0 *default-log-port* "Using cache dir " cache-dir)
;;     (if (not cache-dir)
;; 	(begin
;; 	  (debug:print 0 *default-log-port* "ERROR: Failed to find an area to write the cache db")
;; 	  (exit 1))
;; 	(let* ((th1      (make-thread
;; 			  (lambda ()
;; 			    (if (and (common:file-exists? megatest-db)
;; 				     (file-write-access? megatest-db))
;; 				(begin
;; 				  (db:sync-to-megatest.db dbstruct 'timestamps) ;; internally mutexes on *db-local-sync*
;; 				  (debug:print-info 2 *default-log-port* "Done syncing to megatest.db"))))
;; 			  "call-with-cached-db sync-to-megatest.db"))
;; 	       (cache-db (db:cache-for-read-only
;; 			  megatest-db
;; 			  (conc cache-dir "/" fname)
;; 			  use-last-update: #t)))
;; 	  (thread-start! th1)
;; 	  (apply proc cache-db params)
;; 	  ))))

;; options:
;;
;;  'killservers  - kills all servers
;;  'dejunk       - removes junk records
;;  'adj-testids  - move test-ids into correct ranges
;;  'old2new      - sync megatest.db records to .db/{main,1,2 ...}.db
;;  'new2old      - sync .db/{main,1,2,3 ...}.db to megatest.db
;;  'old2new      - sync megatest.db to /tmp/.../megatest.db and /tmp/.../megatest_ref.db
;;  'new2old      - sync /tmp/.../megatest.db to megatest.db and /tmp/.../megatest_ref.db (and update data_synced)
;;  'closeall     - close all opened dbs
;;  'schema       - attempt to apply schema changes
;;
;;  run-ids: '(1 2 3 ...) or #f (for all)
;;
(define (db:multi-db-sync dbstruct . options)
  (if (not (launch:setup))
      (debug:print 0 *default-log-port* "ERROR: not able to setup up for megatest.")
      (let* ((mtdb     (dbr:dbstruct-mtdb dbstruct))
	     (tmpdb    (db:get-db dbstruct))
             (refndb   (dbr:dbstruct-refndb dbstruct))
	     (allow-cleanup #t) ;; (if run-ids #f #t))
  ;; (if (not (launch:setup))
  ;;    (debug:print 0 *default-log-port* "ERROR: not able to setup up for megatest.")
  (let* ((mtdb     (dbr:dbstruct-mtdb dbstruct))
	 (tmpdb    (db:get-db dbstruct))
	 (refndb   (dbr:dbstruct-refndb dbstruct))
	 (allow-cleanup #t) ;; (if run-ids #f #t))
	     ;; (tdbdat  (tasks:open-db))
	     (servers (server:get-list *toppath*)) ;; (tasks:get-all-servers (db:delay-if-busy tdbdat)))
	     (data-synced 0)) ;; count of changed records (I hope)
	 (servers (server:get-list *toppath*)) ;; (tasks:get-all-servers (db:delay-if-busy tdbdat)))
	 (data-synced 0)) ;; count of changed records (I hope)
    
    (for-each
     (lambda (option)
       
       (case option
	;; kill servers
	(if (member 'killservers options)
	    (for-each
	     (lambda (server)
	       (match-let (((mod-time host port start-time pid) server))
		 (if (and host pid)
		     (tasks:kill-server host pid))))
	     servers))

	;; clear out junk records
	;;
	(if (member 'dejunk options)
	 ;; kill servers
	 ((killservers)
	  (for-each
	   (lambda (server)
	     (match-let (((mod-time host port start-time pid) server))
	       (if (and host pid)
		   (tasks:kill-server host pid))))
	   servers))
	 
	 ;; clear out junk records
	 ;;
	 ((dejunk)
	    (begin
	      (db:delay-if-busy mtdb) ;; ok to delay on mtdb
	      (db:clean-up mtdb)
	      (db:clean-up tmpdb)
              (db:clean-up refndb)))
	  (db:delay-if-busy mtdb) ;; ok to delay on mtdb
	  (db:clean-up mtdb)
	  (db:clean-up tmpdb)
	  (db:clean-up refndb))

	;; adjust test-ids to fit into proper range
	;;
	;; (if (member 'adj-testids options)
	;;     (begin
	;;       (db:delay-if-busy mtdb)
	;;       (db:prep-megatest.db-for-migration mtdb)))

	;; sync runs, test_meta etc.
	;;
	(if (member 'old2new options)
	 ;; sync runs, test_meta etc.
	 ;;
	 ((old2new)
	    ;; (begin
	    (db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb tmpdb refndb))
	  (set! data-synced
	    (+ (db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb tmpdb refndb)
			      ;; (db:sync-main-list mtdb) mtdb (db:get-db dbstruct #f))
;; 	      (for-each 
;; 	       (lambda (run-id)
;; 		 (db:delay-if-busy mtdb)
;; 		 (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id)))
;; ;;		       (dbstruct (if toppath (make-dbr:dbstruct path: toppath local: #t) #f)))
;; 		   (debug:print 0 *default-log-port* "INFO: Propagating " (length testrecs) " records for run-id=" run-id " to run specific db")
;; 		   (db:replace-test-records dbstruct run-id testrecs)
;; 		   (sqlite3:finalize! (db:dbdat-get-db (dbr:dbstruct-rundb dbstruct)))))
;; 	       run-ids)))

	;; now ensure all newdb data are synced to megatest.db
	;; do not use the run-ids list passed in to the function
	;;
	(if (member 'new2old options)
	    (set! data-synced
		  (+ (db:sync-tables (db:sync-all-tables-list dbstruct) #f tmpdb refndb mtdb)
		      data-synced)))
	       data-synced)))
	 
	 ;; now ensure all newdb data are synced to megatest.db
	 ;; do not use the run-ids list passed in to the function
	 ;;
	 ((new2old)
	  (set! data-synced
	    (+ (db:sync-tables (db:sync-all-tables-list dbstruct) #f tmpdb refndb mtdb)
	       data-synced)))

	 ((adj-target)
	  (db:adj-target (db:dbdat-get-db mtdb))
	  (db:adj-target (db:dbdat-get-db tmpdb))
	  (db:adj-target (db:dbdat-get-db refndb)))

        (if (member 'schema options)
	 
	 ((schema)
            (begin
              (db:patch-schema-maindb (db:dbdat-get-db mtdb))
              (db:patch-schema-maindb (db:dbdat-get-db tmpdb))
              (db:patch-schema-maindb (db:dbdat-get-db refndb))
              (db:patch-schema-rundb  (db:dbdat-get-db mtdb))
              (db:patch-schema-rundb  (db:dbdat-get-db tmpdb))
              (db:patch-schema-rundb  (db:dbdat-get-db refndb))))
              
	;; (let* ((maindb      (make-dbr:dbstruct path: toppath local: #t))
	  (db:patch-schema-maindb (db:dbdat-get-db mtdb))
	  (db:patch-schema-maindb (db:dbdat-get-db tmpdb))
	  (db:patch-schema-maindb (db:dbdat-get-db refndb))
	  (db:patch-schema-rundb  (db:dbdat-get-db mtdb))
	  (db:patch-schema-rundb  (db:dbdat-get-db tmpdb))
	  (db:patch-schema-rundb  (db:dbdat-get-db refndb))))
       
       (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb))
	;; 	   (src-run-ids (if run-ids run-ids (db:get-all-run-ids (db:dbdat-get-db (db:get-db maindb 0)))))
	;; 	   (all-run-ids (sort (delete-duplicates (cons 0 src-run-ids)) <))
	;; 	   (count       1)
	;; 	   (total       (length all-run-ids))
	;; 	   (dead-runs  '()))
     options)
	;;   ;; first fix schema if needed
	;;   (map
	;;    (lambda (th)
	;; 	 (thread-join! th))
	;;    (map
    data-synced))

(define (db:tmp->megatest.db-sync dbstruct last-update)
  (let* ((mtdb        (dbr:dbstruct-mtdb dbstruct))
	;; 	(lambda (run-id)
	;; 	  (thread-start! 
	;; 	   (make-thread
	;; 	    (lambda ()
	 (tmpdb       (db:get-db dbstruct))
	;; 	      (let* ((fromdb (if toppath (make-dbr:dbstruct path: toppath local: #t) #f))
;;                    (if (member 'schema options)
	;; 		(if (eq? run-id 0)
	;; 		    (let ((maindb  (db:dbdat-get-db (db:get-db fromdb #f))))
	;; 		      (db:patch-schema-maindb run-id maindb))
	;; 		    (db:patch-schema-rundb run-id frundb)))
	;; 	      (set! count (+ count 1))
	 (refndb      (dbr:dbstruct-refndb dbstruct))
	 (res         (db:sync-tables (db:sync-all-tables-list dbstruct) last-update tmpdb refndb mtdb)))
    (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb)
    res))

	;; 	      (debug:print 0 *default-log-port* "Finished patching schema for " (if (eq? run-id 0) " main.db " (conc run-id ".db")) ", " count " of " total)))))
	;; 	all-run-ids))
	;;   ;; Then sync and fix db's
	;;   (set! count 0)
	;;   (process-fork
	;;    (lambda ()
	;; 	 (map
;;;; run-ids
;;    if #f use *db-local-sync* : or 'local-sync-flags
;;    if #t use timestamps      : or 'timestamps
;;
;;  NB// no-sync-db is the db handle, not a flag!
;;
	;; 	  (lambda (th)
	;; 	    (thread-join! th))
(define (db:sync-to-megatest.db dbstruct #!key (no-sync-db #f)) 
  (let* ((start-time         (current-seconds))
	;; 	  (map
	;; 	   (lambda (run-id)
	 (last-full-update   (if no-sync-db
				 (db:no-sync-get/default no-sync-db "LAST_FULL_UPDATE" 0)
				 0))
	 (full-sync-needed   (> (- start-time last-full-update) 3600)) ;; every hour do a full sync
	;; 	     (thread-start! 
	;; 	      (make-thread
	;; 	       (lambda ()
	;; 		 (let* ((fromdb (if toppath (make-dbr:dbstruct path: toppath local: #t) #f))
	;; 			(frundb (db:dbdat-get-db (db:get-db fromdb run-id))))
	;; 		   (if (eq? run-id 0)
	;; 		       (let ((maindb  (db:dbdat-get-db (db:get-db fromdb #f))))
;;                             (db:sync-tables (db:sync-main-list dbstruct) #f (db:get-db fromdb #f) mtdb)
	;; 			 (set! dead-runs (db:clean-up-maindb (db:get-db fromdb #f))))
	;; 		       (begin
	;; 			 ;; NB// must sync first to ensure deleted tests get marked as such in megatest.db
;;                             (db:sync-tables db:sync-tests-only #f (db:get-db fromdb run-id) mtdb)
	;; 			 (db:clean-up-rundb (db:get-db fromdb run-id)))))
	;; 		 (set! count (+ count 1))
	;; 		 (debug:print 0 *default-log-port* "Finished clean up of "
	;; 			      (if (eq? run-id 0)
	 (last-update        (if full-sync-needed
	;; 				  " main.db " (conc run-id ".db")) ", " count " of " total)))))
	;; 	   all-run-ids))))

				 0
	;; removed deleted runs
;; (let ((dbdir (tasks:get-task-db-path)))
;;   (for-each (lambda (run-id)
;; 	      (let ((fullname (conc dbdir "/" run-id ".db")))
;; 		(if (file-exists? fullname)
;; 		    (begin
				 (if no-sync-db
				     (db:no-sync-get/default no-sync-db "LAST_UPDATE" 0)
				     0))) ;; (or (db:get-var dbstruct "LAST_UPDATE") 0))
	 (sync-needed        (> (- start-time last-update) 6))
	 (res                (if (or sync-needed ;; don't sync if a sync already occurred in the past 6 seconds
				     full-sync-needed)
				 (begin
				   (if no-sync-db
				       (begin
;; 		      (debug:print 0 *default-log-port* "Removing database file for deleted run " fullname)
;; 		      (delete-file fullname)))))
					 (if full-sync-needed (db:no-sync-set no-sync-db "LAST_FULL_UPDATE" start-time))
					 (db:no-sync-set no-sync-db "LAST_UPDATE" start-time)))
;; 	    dead-runs))))
;; 
	;; (db:close-all dbstruct)
				   (db:tmp->megatest.db-sync dbstruct last-update))
	;; (sqlite3:finalize! mdb)
        (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb)
	data-synced)))
				 0))
	 (sync-time           (- (current-seconds) start-time)))
      (debug:print-info 3 *default-log-port* "Sync of newdb to olddb completed in " sync-time " seconds pid="(current-process-id))
      (if (common:low-noise-print 30 "sync new to old")
          (if sync-needed
              (debug:print-info 0 *default-log-port* "Sync of " res " records from newdb to olddb completed in " sync-time " seconds pid="(current-process-id))
              (debug:print-info 0 *default-log-port* "No sync needed, last updated " (- start-time last-update) " seconds ago")))
      res))

;; keeping it around for debugging purposes only
(define (open-run-close-no-exception-handling  proc idb . params)
  (debug:print-info 11 *default-log-port* "open-run-close-no-exception-handling START given a db=" (if idb "yes " "no ") ", params=" params)
  (print "I don't work anymore. open-run-close-no-exception-handling needs fixing or removing...")
  (exit)
  (if (or *db-write-access*

	 (err-status ((condition-property-accessor 'sqlite3 'status #f) exn)))
     (case err-status
       ((busy)
	(thread-sleep! sleep-time))
       (else
	(debug:print 0 *default-log-port* "EXCEPTION: database probably overloaded or unreadable.")
	(debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
	(print "exn=" (condition->list exn))
	(debug:print 5 *default-log-port* "exn=" (condition->list exn))
	(debug:print 0 *default-log-port* " status:  " ((condition-property-accessor 'sqlite3 'status) exn))
	(print-call-chain (current-error-port))
	(thread-sleep! sleep-time)
	(debug:print-info 0 *default-log-port* "trying db call one more time....this may never recover, if necessary kill process " (current-process-id) " on host " (get-host-name) " to clean up")))
     (apply open-run-close-exception-handling proc idb params))
   (apply open-run-close-no-exception-handling proc idb params)))

;; (define open-run-close 
(define open-run-close open-run-close-exception-handling)
		;;	   open-run-close-no-exception-handling
;;			   open-run-close-exception-handling)
;;)

(define (db:initialize-main-db dbdat)
  (when (not *configinfo*)
           (launch:setup)) ;; added because Elena was getting stack dump because *configinfo* below was #f.
  (let* ((configdat (car *configinfo*))  ;; tut tut, global warning...
	 (keys     (keys:config-get-fields configdat))
	 (havekeys (> (length keys) 0))
	 (keystr   (keys->keystr keys))
	 (fieldstr (keys->key/field keys))
	 (fieldstr (keys:make-key/field-string configdat))
	 (db       (db:dbdat-get-db dbdat)))
    (for-each (lambda (key)
		(let ((keyn key))
		  (if (member (string-downcase keyn)
			      (list "runname" "state" "status" "owner" "event_time" "comment" "fail_count"
				    "pass_count"))
				    "pass_count" "contour"))
		      (begin
			(print "ERROR: your key cannot be named " keyn " as this conflicts with the same named field in the runs table, you must remove your megatest.db and <linktree>/.db before trying again.")
			(exit 1)))))
	      keys)
    (sqlite3:with-transaction
     db
     (lambda ()

       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS extradat (id INTEGER PRIMARY KEY, run_id INTEGER, key TEXT, val TEXT);")
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS metadat (id INTEGER PRIMARY KEY, var TEXT, val TEXT,
                                  CONSTRAINT metadat_constraint UNIQUE (var));")
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS access_log (id INTEGER PRIMARY KEY, user TEXT, accessed TIMESTAMP, args TEXT);")
       ;; Must do this *after* running patch db !! No more. 
       ;; cannot use db:set-var since it will deadlock, hardwire the code here
       (sqlite3:execute db "INSERT OR REPLACE INTO metadat (var,val) VALUES (?,?);" "MEGATEST_VERSION" (common:version-signature))
       (debug:print-info 11 *default-log-port* "db:initialize END")))))
       (debug:print-info 11 *default-log-port* "db:initialize END") ;; ))))

;;======================================================================
;; R U N   S P E C I F I C   D B 
;;======================================================================

(define (db:initialize-run-id-db db)
  (sqlite3:with-transaction 
   db
   (lambda ()
     (sqlite3:execute db "CREATE TABLE IF NOT EXISTS tests 
       ;;======================================================================
       ;; R U N   S P E C I F I C   D B 
       ;;======================================================================
       
       ;; (define (db:initialize-run-id-db db)
       ;;   (sqlite3:with-transaction 
       ;;    db
       ;;    (lambda ()
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS tests 
                    (id INTEGER PRIMARY KEY,
                     run_id       INTEGER   DEFAULT -1,
                     testname     TEXT      DEFAULT 'noname',
                     host         TEXT      DEFAULT 'n/a',
                     cpuload      REAL      DEFAULT -1,
                     diskfree     INTEGER   DEFAULT -1,
                     uname        TEXT      DEFAULT 'n/a', 

                     comment      TEXT      DEFAULT '',
                     event_time   TIMESTAMP DEFAULT (strftime('%s','now')),
                     fail_count   INTEGER   DEFAULT 0,
                     pass_count   INTEGER   DEFAULT 0,
                     archived     INTEGER   DEFAULT 0, -- 0=no, > 1=archive block id where test data can be found
                     last_update  INTEGER DEFAULT (strftime('%s','now')),
                        CONSTRAINT testsconstraint UNIQUE (run_id, testname, item_path));")
     (sqlite3:execute db "CREATE INDEX IF NOT EXISTS tests_index ON tests (run_id, testname, item_path, uname);")
     (sqlite3:execute db "CREATE TRIGGER  IF NOT EXISTS update_tests_trigger AFTER UPDATE ON tests
       (sqlite3:execute db "CREATE INDEX IF NOT EXISTS tests_index ON tests (run_id, testname, item_path, uname);")
       (sqlite3:execute db "CREATE TRIGGER  IF NOT EXISTS update_tests_trigger AFTER UPDATE ON tests
                             FOR EACH ROW
                               BEGIN 
                                 UPDATE tests SET last_update=(strftime('%s','now'))
                                   WHERE id=old.id;
                               END;")
     (sqlite3:execute db "CREATE TABLE IF NOT EXISTS test_steps 
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS test_steps 
                              (id INTEGER PRIMARY KEY,
                               test_id INTEGER, 
                               stepname TEXT, 
                               state TEXT DEFAULT 'NOT_STARTED', 
                               status TEXT DEFAULT 'n/a',
                               event_time TIMESTAMP,
                               comment TEXT DEFAULT '',
                               logfile TEXT DEFAULT '',
                               last_update  INTEGER DEFAULT (strftime('%s','now')),
                               CONSTRAINT test_steps_constraint UNIQUE (test_id,stepname,state));")
     (sqlite3:execute db "CREATE INDEX IF NOT EXISTS teststeps_index ON tests (run_id, testname, item_path);")
     (sqlite3:execute db "CREATE TRIGGER  IF NOT EXISTS update_teststeps_trigger AFTER UPDATE ON test_steps
       (sqlite3:execute db "CREATE INDEX IF NOT EXISTS teststeps_index ON tests (run_id, testname, item_path);")
       (sqlite3:execute db "CREATE TRIGGER  IF NOT EXISTS update_teststeps_trigger AFTER UPDATE ON test_steps
                             FOR EACH ROW
                               BEGIN 
                                 UPDATE test_steps SET last_update=(strftime('%s','now'))
                                   WHERE id=old.id;
                               END;")
     (sqlite3:execute db "CREATE TABLE IF NOT EXISTS test_data (id INTEGER PRIMARY KEY,
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS test_data (id INTEGER PRIMARY KEY,
                                test_id INTEGER,
                                category TEXT DEFAULT '',
                                variable TEXT,
	                        value REAL,
	                        expected REAL,
	                        tol REAL,
                                units TEXT,
                                comment TEXT DEFAULT '',
                                status TEXT DEFAULT 'n/a',
                                type TEXT DEFAULT '',
                                last_update  INTEGER DEFAULT (strftime('%s','now')),
                              CONSTRAINT test_data_constraint UNIQUE (test_id,category,variable));")
     (sqlite3:execute db "CREATE INDEX IF NOT EXISTS test_data_index ON test_data (test_id);")
     (sqlite3:execute db "CREATE TRIGGER  IF NOT EXISTS update_test_data_trigger AFTER UPDATE ON test_data
       (sqlite3:execute db "CREATE INDEX IF NOT EXISTS test_data_index ON test_data (test_id);")
       (sqlite3:execute db "CREATE TRIGGER  IF NOT EXISTS update_test_data_trigger AFTER UPDATE ON test_data
                             FOR EACH ROW
                               BEGIN 
                                 UPDATE test_data SET last_update=(strftime('%s','now'))
                                   WHERE id=old.id;
                               END;")
     (sqlite3:execute db "CREATE TABLE IF NOT EXISTS test_rundat (
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS test_rundat (
                              id           INTEGER PRIMARY KEY,
                              test_id      INTEGER,
                              update_time  TIMESTAMP,
                              cpuload      INTEGER DEFAULT -1,
                              diskfree     INTEGER DEFAULT -1,
                              diskusage    INTGER DEFAULT -1,
                              run_duration INTEGER DEFAULT 0);")
     (sqlite3:execute db "CREATE TABLE IF NOT EXISTS archives (
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS archives (
                              id           INTEGER PRIMARY KEY,
                              test_id      INTEGER,
                              state        TEXT DEFAULT 'new',
                              status       TEXT DEFAULT 'n/a',
                              archive_type TEXT DEFAULT 'bup',
                              du           INTEGER,
                              archive_path TEXT);")))
  db)
    db))

;;======================================================================
;; A R C H I V E S
;;======================================================================

;; dneeded is minimum space needed, scan for existing archives that 
;; are on disks with adequate space and already have this test/itempath

	 db 
	 (conc
	  "SELECT d.id,d.archive_area_name,disk_path,last_df,last_df_time FROM archive_disks AS d
             INNER JOIN archive_blocks AS b ON d.id=b.archive_disk_id
             WHERE b.id IN (" (string-intersperse (map conc res) ",") ") AND
         last_df > ?;")
	 dneeded))
    (stack-push! (dbr:dbstruct-dbstack dbstruct) dbdat)
    blocks))
    
;; returns id of the record, register a disk allocated to archiving and record it's last known
;; available space
;;
(define (db:archive-register-disk dbstruct bdisk-name bdisk-path df)
  (let* ((dbdat        (db:get-db dbstruct)) ;; archive tables are in main.db

                                          WHERE archive_disk_id=? AND disk_path=?;"
				   bdisk-id archive-path du))
	  res)
	(begin
	  (sqlite3:execute db "INSERT OR REPLACE INTO archive_blocks (archive_disk_id,disk_path,last_du)
                                                        VALUES (?,?,?);"
			   bdisk-id archive-path (or du 0))
	  (db:archive-register-block-name dbstruct bdisk-id archive-path du: du)))))
	  (db:archive-register-block-name dbstruct bdisk-id archive-path du: du)))
    (stack-push! (dbr:dbstruct-dbstack dbstruct) dbdat)
    res))


;; The "archived" field in tests is overloaded; 0 = not archived, > 0 archived in block with given id
;;
(define (db:test-set-archive-block-id dbstruct run-id test-id archive-block-id)
  (db:with-db
   dbstruct

;;======================================================================
;; L O G G I N G    D B 
;;======================================================================

(define (open-logging-db)
  (let* ((dbpath    (conc (if *toppath* (conc *toppath* "/") "") "logging.db")) ;; fname)
	 (dbexists  (file-exists? dbpath))
	 (dbexists  (common:file-exists? dbpath))
	 (db        (sqlite3:open-database dbpath))
	 (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					   (string->number (args:get-arg "-override-timeout"))
					   136000)))) ;; 136000)))
    (sqlite3:set-busy-handler! db handler)
    (if (not dbexists)
	(begin

  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
	 (deadtime-str (configf:lookup *configdat* "setup" "deadtime"))
	 (deadtime     (if (and deadtime-str
				(string->number deadtime-str))
			   (string->number deadtime-str)
			   7200))) ;; two hours
			   72000))) ;; twenty hours
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
       
       ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
       ;;

;;
;; (define (db:launch-delay-left dbstruct run-id launch-delay)
  

;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCED'));
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));

(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
	 (deadtime-str (configf:lookup *configdat* "setup" "deadtime"))
	 (deadtime-str (configf:lookup *configdat* "setup" "deadtime")) ; FIXME suspect test run time & deadtime are not well matched; resulting in COMPLETED/DEAD status of an a-ok running test
	 (deadtime     (if (and deadtime-str
				(string->number deadtime-str))
			   (string->number deadtime-str)
			   7200))) ;; two hours
    (db:with-db 
     dbstruct #f #f
     (lambda (db)

       ;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
       ;;
       ;; (db:delay-if-busy dbdat)
       (let* (;; (min-incompleted (filter (lambda (x)
              ;;      		      (let* ((testpath (cadr x))
              ;;      			     (tdatpath (conc testpath "/testdat.db"))
              ;;      			     (dbexists (file-exists? tdatpath)))
              ;;      			     (dbexists (common:file-exists? tdatpath)))
              ;;      			(or (not dbexists) ;; if no file then something wrong - mark as incomplete
              ;;      			    (> (- (current-seconds)(file-modification-time tdatpath)) 600)))) ;; no change in 10 minutes to testdat.db - she's dead Jim
              ;;      		    incompleted))
              (min-incompleted-ids (map car incompleted)) ;; do 'em all
              (all-ids             (append min-incompleted-ids (map car oldlaunched))))
         (if (> (length all-ids) 0)
             (begin
               (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as INCOMPLETE")
               (for-each
                (lambda (test-id)
                  (db:test-set-state-status dbstruct run-id test-id "COMPLETE" "DEAD" "Test failed to complete"))
                  (db:test-set-state-status dbstruct run-id test-id "COMPLETED" "DEAD" "Test failed to complete")) ;; fix for one aspect of Randy's ticket 1405717332 ;; TODO - fix problem where test goes to COMPLETED/DEAD while in progress, only later to go to COMPLETED/PASS.  ref ticket 220546828
                all-ids))))))))

;; ALL REPLACED BY THE BLOCK ABOVE
;;
;; 	    (sqlite3:execute 
;; 	     db
;; 	     (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN (" 

	       "DELETE FROM tests WHERE state='DELETED';"
	       ;; delete all tests that have no run
	       "DELETE FROM tests WHERE run_id NOT IN (SELECT DISTINCT id FROM runs);"
	       ;; delete all runs that are state='deleted'
	       "DELETE FROM runs WHERE state='deleted';"
	       ;; delete empty runs
	       "DELETE FROM runs WHERE id NOT IN (SELECT DISTINCT r.id FROM runs AS r INNER JOIN tests AS t ON t.run_id=r.id);"
	       ;; remove orphaned test_rundat entries
	       "DELETE FROM test_rundat where test_id NOT IN (SELECT id FROM tests);"
	       ;; 
	       "DELETE FROM test_steps WHERE test_id NOT IN (SELECT id FROM tests);"
	       ))))
    ;; (db:delay-if-busy dbdat)
    (sqlite3:with-transaction 
     db
     (lambda ()
       (sqlite3:for-each-row (lambda (tot)
			       (debug:print-info 0 *default-log-port* "Records count before clean: " tot))

	      (lambda (db)
		(sqlite3:execute db "INSERT OR REPLACE INTO metadat (var,val) VALUES (?,?);" var val))))

(define (db:del-var dbstruct var)
  (db:with-db dbstruct #f #t 
	      (lambda (db)
		(sqlite3:execute db "DELETE FROM metadat WHERE var=?;" var))))

;;======================================================================
;; no-sync.db - small bits of data to be shared between servers
;;======================================================================

(define (db:open-no-sync-db)
  (let* ((dbpath (db:dbfile-path))
	 (dbname (conc dbpath "/no-sync.db"))
	 (db-exists (common:file-exists? dbname))
	 (db     (sqlite3:open-database dbname)))
    (sqlite3:set-busy-handler! db (make-busy-timeout 136000))
    (if (not db-exists)
	(begin
	  (sqlite3:execute db "PRAGMA synchronous = 0;")
	  (sqlite3:execute db "CREATE TABLE IF NOT EXISTS no_sync_metadat (var TEXT,val TEXT, CONSTRAINT no_sync_metadat_constraint UNIQUE (var));")
	  (sqlite3:execute db "PRAGMA journal_mode=WAL;")))
    db))

;; if we are not a server create a db handle. this is not finalized
;; so watch for problems. I'm still not clear if it is needed to manually
;; finalize sqlite3 dbs with the sqlite3 egg.
;;
(define (db:no-sync-db db-in)
  (mutex-lock! *db-access-mutex*)
  (let ((res (if db-in
                 db-in
                 (let ((db (db:open-no-sync-db)))
                   (set! *no-sync-db* db)
                   db))))
    (mutex-unlock! *db-access-mutex*)
    res))

(define (db:no-sync-set db var val)
  (sqlite3:execute (db:no-sync-db db) "INSERT OR REPLACE INTO no_sync_metadat (var,val) VALUES (?,?);" var val))

(define (db:no-sync-del! db var)
  (sqlite3:execute (db:no-sync-db db) "DELETE FROM no_sync_metadat WHERE var=?;" var))

(define (db:no-sync-get/default db var default)
  (let ((res default))
    (sqlite3:for-each-row
     (lambda (val)
       (set! res val))
     (db:no-sync-db db)
     "SELECT val FROM no_sync_metadat WHERE var=?;"
     var)
    (if res
        (let ((newres (if (string? res)
			  (string->number res)
			  #f)))
          (if newres
              newres
              res))
        res)))

(define (db:no-sync-close-db db)
  (db:safely-close-sqlite3-db db))

;; transaction protected lock aquisition
;; either:
;;    fails    returns  (#f . lock-creation-time)
;;    succeeds (returns (#t . lock-creation-time)
;; use (db:no-sync-del! db keyname) to release the lock
;;
(define (db:no-sync-get-lock db-in keyname)
  (let ((db (db:no-sync-db db-in)))
    (sqlite3:with-transaction
     db
     (lambda ()
       (handle-exceptions
	   exn
	   (let ((lock-time (current-seconds)))
	     (sqlite3:execute db "INSERT INTO no_sync_metadat (var,val) VALUES(?,?);" keyname lock-time)
	     `(#t . ,lock-time))
	 `(#f . ,(sqlite3:first-result db "SELECT val FROM no_sync_metadat WHERE var=?;" keyname)))))))



;; use a global for some primitive caching, it is just silly to
;; re-read the db over and over again for the keys since they never
;; change

;; why get the keys from the db? why not get from the *configdat*
;; using keys:config-get-fields?

	res)))

;; look up values in a header/data structure
(define (db:get-value-by-header row header field)
  (if (or (null? header) (not row))
      #f
      (let loop ((hed (car header))
		 (tal (cdr header))
		 (n   0))
	(if (equal? hed field)
	    (vector-ref row n)
                 (tal (cdr header))
                 (n   0))
        (if (equal? hed field)
            (handle-exceptions
             exn
             (begin
               (debug:print 0 *default-log-port* "WARNING: attempt to read non-existant field, row=" row " header=" header " field=" field)
               #f)
             (vector-ref row n))
	    (if (null? tal) #f (loop (car tal)(cdr tal)(+ n 1)))))))

;; Accessors for the header/data structure
;; get rows and header from 
(define (db:get-header vec)(vector-ref vec 0))
(define (db:get-rows   vec)(vector-ref vec 1))

;;======================================================================
;;  R U N S
;;======================================================================





(define (db:get-run-times dbstruct run-patt target-patt)
(let ((res `())
           (qry 	(conc "select runname, (max(end_time)-min(event_time))/60 as runtime, target from (select runname, run_id,tests.event_time,tests.event_time+run_duration AS end_time, " (string-join (db:get-keys dbstruct) " || '/' || ") " as target from tests inner join runs on tests.run_id = runs.id where runs.runname like ? and target like ?) group by run_id ;")))
;(print qry)
(db:with-db 
   dbstruct
   #f ;; this is for the main runs db
   #f ;; does not modify db
   (lambda (db)
            (sqlite3:for-each-row
	(lambda (runname runtime target )
	  (set! res (cons (vector runname runtime target) res)))
	db
        qry 
	run-patt target-patt)
       
       res))))



(define (db:get-run-name-from-id dbstruct run-id)
  (db:with-db 
   dbstruct
   #f ;; this is for the main runs db
   #f ;; does not modify db
   (lambda (db)

(define (db:print-current-query-stats)
  ;; generate stats from *db-api-call-time*
  (let ((ordered-keys (sort (hash-table-keys *db-api-call-time*)
			    (lambda (a b)
			      (let ((sum-a (common:sum (hash-table-ref *db-api-call-time* a)))
				    (sum-b (common:sum (hash-table-ref *db-api-call-time* b))))
				(> sum-a sum-b))))))
				(> sum-a sum-b)))))
	(total        0))
    (for-each
     (lambda (cmd-key)
       (let* ((dat  (hash-table-ref *db-api-call-time* cmd-key))
	      (num  (length dat))
	      (avg  (if (> (length dat) 0)
	      (avg  (if (> num 0)
			(/ (common:sum dat)(length dat)))))
	 (set! total (+ total num))
	 (debug:print-info 0 *default-log-port* cmd-key "\tavg: " avg " max: " (common:max dat) " min: " (common:min-max < dat) " num: " (length dat))))
     ordered-keys)))
     ordered-keys)
    (debug:print-info 0 *default-log-port* "TOTAL: " total " api calls since start.")))

(define (db:get-all-run-ids dbstruct)
  (db:with-db
   dbstruct
   #f
   #f
   (lambda (db)

                              (cons (list->vector r) res))
                            '()
                            db
                            qry-str
                            runnamepatt)))))))

;; use (get-value-by-header (db:get-header runinfo)(db:get-rows runinfo))
;; NOTE: Does NOT return a list of rows (or one row) for the first slot of the vector
;;       this is inconsistent with get-runs but it makes some sense.
;;
(define (db:get-run-info dbstruct run-id)
  ;;(if (hash-table-ref/default *run-info-cache* run-id #f)
  ;;    (hash-table-ref *run-info-cache* run-id)
  (let* ((res       (vector #f #f #f #f))
	 (keys      (db:get-keys dbstruct))
	 (remfields (list "id" "runname" "state" "status" "owner" "event_time"))
	 (remfields (list "id" "runname" "state" "status" "owner" "event_time" "comment" "fail_count" "pass_count" "contour")) ;;  "area_id"))
	 (header    (append keys remfields))
	 (keystr    (conc (keys->keystr keys) ","
			  (string-intersperse remfields ","))))
    (debug:print-info 11 *default-log-port* "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
    (db:with-db
     dbstruct #f #f
     (lambda (db)

;; i.e. these lists define what to NOT show.
;; states and statuses are required to be lists, empty is ok
;; not-in #t = above behaviour, #f = must match
;; mode:
;;  'dashboard - use state = 'COMPLETED' AND status in ( statuses ) OR state in ( states )
;;
(define (db:get-tests-for-run dbstruct run-id testpatt states statuses offset limit not-in sort-by sort-order qryvals last-update mode)
  (if (not (number? run-id))
      (begin ;; no need to treat this as an error by default
	(debug:print 4 *default-log-port* "WARNING: call to db:get-tests-for-run with bad run-id=" run-id)
	;; (print-call-chain (current-error-port))
	'())
      (let* ((qryvalstr       (case qryvals
				((shortlist) "id,run_id,testname,item_path,state,status")
				((#f)        db:test-record-qry-selector) ;; "id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment")
				(else        qryvals)))
	     (res            '())
	     ;; if states or statuses are null then assume match all when not-in is false
	     (states-qry      (if (null? states) 
				  #f
				  (conc " state "  
					(if (eq? mode 'dashboard)
					    " IN ('"
					    (if not-in
						" NOT IN ('"
						" IN ('")) 
					(string-intersperse states   "','")
					"')")))
	     (statuses-qry    (if (null? statuses)
				  #f
				  (conc " status "
					(if (eq? mode 'dashboard)
					    " IN ('"
					    (if not-in 
						" NOT IN ('"
						" IN ('") )
					(string-intersperse statuses "','")
					"')")))
	     (interim-qry       (conc " AND " (if not-in "NOT " "") "( state='COMPLETED' " (if statuses-qry (conc " AND " statuses-qry " ) ") " ) ")
				      (if states-qry
					  (conc (if not-in " AND " " OR ") states-qry ) ;; " ) ")
					  "")))
	     (states-statuses-qry 
	      (cond 
	       ((and states-qry statuses-qry)
		(case mode
		  ((dashboard) 
		   (if not-in
		       (conc " AND (state='COMPLETED' AND status NOT IN ('" (string-intersperse statuses "','") "')) "
			     " OR (state != 'COMPLETED' AND state NOT IN ('" (string-intersperse states "','") "')) ")
		       (conc " AND (state='COMPLETED' AND status IN ('" (string-intersperse statuses "','") "')) "
			     " OR (state NOT IN ('COMPLETED','DELETED') AND state IN ('" (string-intersperse states "','") "')) ")))
		  (else       (conc " AND ( " states-qry " AND " statuses-qry " ) "))))
	       (states-qry  
		(case mode
		  ((dashboard) (conc " AND " (if not-in "NOT " "") " state IN ('" (string-intersperse states    "','") "') ")) ;; interim-qry)
		  (else        (conc " AND " states-qry))))
	       (statuses-qry 
		(case mode
		  ((dashboard) (conc " AND " (if not-in "NOT " "") " status IN ('" (string-intersperse statuses "','") "') ")) ;; interim-qry)
		  (else        (conc " AND " statuses-qry))))
	       (else "")))
	     (tests-match-qry (tests:match->sqlqry testpatt))
	     (qry             (conc "SELECT " qryvalstr
  (let* ((qryvalstr       (case qryvals
			    ((shortlist) "id,run_id,testname,item_path,state,status")
			    ((#f)        db:test-record-qry-selector) ;; "id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment")
			    (else        qryvals)))
	 (res            '())
	 ;; if states or statuses are null then assume match all when not-in is false
	 (states-qry      (if (null? states) 
			      #f
			      (conc " state "  
				    (if (eq? mode 'dashboard)
					" IN ('"
					(if not-in
					    " NOT IN ('"
					    " IN ('")) 
				    (string-intersperse states   "','")
				    "')")))
	 (statuses-qry    (if (null? statuses)
			      #f
			      (conc " status "
				    (if (eq? mode 'dashboard)
					" IN ('"
					(if not-in 
					    " NOT IN ('"
					    " IN ('") )
				    (string-intersperse statuses "','")
				    "')")))
	 (interim-qry       (conc " AND " (if not-in "NOT " "") "( state='COMPLETED' " (if statuses-qry (conc " AND " statuses-qry " ) ") " ) ")
				  (if states-qry
				      (conc (if not-in " AND " " OR ") states-qry ) ;; " ) ")
				      "")))
	 (states-statuses-qry 
	  (cond 
	   ((and states-qry statuses-qry)
	    (case mode
	      ((dashboard) 
	       (if not-in
		   (conc " AND (state='COMPLETED' AND status NOT IN ('" (string-intersperse statuses "','") "')) "
			 " OR (state != 'COMPLETED' AND state NOT IN ('" (string-intersperse states "','") "')) ")
		   (conc " AND (state='COMPLETED' AND status IN ('" (string-intersperse statuses "','") "')) "
			 " OR (state NOT IN ('COMPLETED','DELETED') AND state IN ('" (string-intersperse states "','") "')) ")))
	      (else       (conc " AND ( " states-qry " AND " statuses-qry " ) "))))
	   (states-qry  
	    (case mode
	      ((dashboard) (conc " AND " (if not-in "NOT " "") " state IN ('" (string-intersperse states    "','") "') ")) ;; interim-qry)
	      (else        (conc " AND " states-qry))))
	   (statuses-qry 
	    (case mode
	      ((dashboard) (conc " AND " (if not-in "NOT " "") " status IN ('" (string-intersperse statuses "','") "') ")) ;; interim-qry)
	      (else        (conc " AND " statuses-qry))))
	   (else "")))
	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT " qryvalstr
				(if run-id
				    " FROM tests WHERE run_id=? "
				    " FROM tests WHERE ? > 0 ") ;; should work?
				    (if last-update " " " AND state != 'DELETED' ") ;; if using last-update we want deleted tests?
				    states-statuses-qry
				    (if tests-match-qry (conc " AND (" tests-match-qry ") ") "")
				    (if last-update (conc " AND last_update >= " last-update " ") "")
				    (case sort-by
				      ((rundir)      " ORDER BY length(rundir) ")
				      ((testname)    (conc " ORDER BY testname " (if sort-order (conc sort-order ",") "") " item_path "))
				      ((statestatus) (conc " ORDER BY state " (if  sort-order (conc sort-order ",") "") " status "))
				      ((event_time)  " ORDER BY event_time ")
				      (else          (if (string? sort-by)
							 (conc " ORDER BY " sort-by " ")
							 " ")))
				    (if sort-order sort-order " ")
				    (if limit  (conc " LIMIT " limit)   " ")
				    (if offset (conc " OFFSET " offset) " ")
				    ";"
				    )))
	(debug:print-info 8 *default-log-port* "db:get-tests-for-run run-id=" run-id ", qry=" qry)
	(db:with-db dbstruct run-id #f
		    (lambda (db)
		      (sqlite3:for-each-row 
		       (lambda (a . b) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment)
			 (set! res (cons (apply vector a b) res))) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment) res)))
		       db
		       qry
		       run-id
		       )))
	(case qryvals
	  ((shortlist)(map db:test-short-record->norm res))
	  ((#f)       res)
	  (else       res)))))
				(if last-update " " " AND state != 'DELETED' ") ;; if using last-update we want deleted tests?
				states-statuses-qry
				(if tests-match-qry (conc " AND (" tests-match-qry ") ") "")
				(if last-update (conc " AND last_update >= " last-update " ") "")
				(case sort-by
				  ((rundir)      " ORDER BY length(rundir) ")
				  ((testname)    (conc " ORDER BY testname " (if sort-order (conc sort-order ",") "") " item_path "))
				  ((statestatus) (conc " ORDER BY state " (if  sort-order (conc sort-order ",") "") " status "))
				  ((event_time)  " ORDER BY event_time ")
				  (else          (if (string? sort-by)
						     (conc " ORDER BY " sort-by " ")
						     " ")))
				(if sort-order sort-order " ")
				(if limit  (conc " LIMIT " limit)   " ")
				(if offset (conc " OFFSET " offset) " ")
				";"
				)))
    (debug:print-info 8 *default-log-port* "db:get-tests-for-run run-id=" run-id ", qry=" qry)
    (db:with-db dbstruct run-id #f
		(lambda (db)
		  (sqlite3:for-each-row 
		   (lambda (a . b) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment)
		     (set! res (cons (apply vector a b) res))) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment) res)))
		   db
		   qry
		   (or run-id 1) ;; 1 > 0 , for the case where we are seeking tests matching criteral for all runs
		   )))
    (case qryvals
      ((shortlist)(map db:test-short-record->norm res))
      ((#f)       res)
      (else       res))))

(define (db:test-short-record->norm inrec)
  ;;  "id,run_id,testname,item_path,state,status"
  ;;  "id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
  (vector (vector-ref inrec 0) ;; id
	  (vector-ref inrec 1) ;; run_id
	  (vector-ref inrec 2) ;; testname

;;  AND NOT (item_path='' AND testname in (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")))
;;  (debug:print 0 *default-log-port* "QRY: " qry)
;;  (db:delay-if-busy)
;;
;; NB// This call only operates on toplevel tests. Consider replacing it with more general call
;;
(define (db:set-tests-state-status dbstruct run-id testnames currstate currstatus newstate newstatus)
  (let ((test-ids '()))
    (for-each
  (for-each (lambda (testname)
	      (let ((qry (conc "UPDATE tests SET state=?,status=? WHERE "
			       (if currstate  (conc "state='" currstate "' AND ") "")
			       (if currstatus (conc "status='" currstatus "' AND ") "")
			       " run_id=? AND testname LIKE ?;"))
		    (test-id (db:get-test-id dbstruct run-id testname "")))
		(db:with-db
		 dbstruct
		 run-id
		 #t
		 (lambda (db)
		   (sqlite3:execute db qry newstate newstatus run-id testname)))
		(if test-id (mt:process-triggers dbstruct run-id test-id newstate newstatus))))
	    testnames))
     (lambda (testname)
       (let ((qry (conc "UPDATE tests SET state=?,status=? WHERE "
			(if currstate  (conc "state='" currstate "' AND ") "")
			(if currstatus (conc "status='" currstatus "' AND ") "")
			" run_id=? AND testname LIKE ?;"))
	     (test-id (db:get-test-id dbstruct run-id testname "")))
	 (db:with-db
	  dbstruct
	  run-id
	  #t
	  (lambda (db)
	    (sqlite3:execute db qry
			     (or newstate  currstate "NOT_STARTED")
			     (or newstatus currstate "UNKNOWN")
			     run-id testname)))
	 (if test-id
	     (begin
	       (set! test-ids (cons test-id test-ids))
	       (mt:process-triggers dbstruct run-id test-id newstate newstatus)))))
     testnames)
    test-ids))

;; ;; speed up for common cases with a little logic
;; ;; NB// Ultimately this will be deprecated in deference to mt:test-set-state-status-by-id
;;
;;      NOTE: run-id is not used
;; ;;
(define (db:test-set-state-status dbstruct run-id test-id newstate newstatus newcomment)

   dbstruct
   #f ;; run-id
   #f
   (lambda (db)
     (let ((res #f))
       (sqlite3:for-each-row ;; attemptnum added to hold pid of top process (not Megatest) controlling a test
	(lambda (id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived)
	  ;;             0    1       2      3      4        5       6      7        8     9     10      11          12          13           14         15          16
	  ;;                0    1       2      3      4        5       6      7        8     9     10      11          12          13           14         15          16
	  (set! res (vector id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived)))
	db
	(conc "SELECT " db:test-record-qry-selector " FROM tests WHERE id=?;")
	test-id)
       res))))

;; Use db:test-get* to access

   #f
   (lambda (db)
     (db:first-result-default
      db
      "SELECT rundir FROM tests WHERE id=?;"
      #f ;; default result
      test-id))))

(define (db:get-test-times dbstruct run-name target)
  (let ((res `())
        (qry 	(conc "select testname, item_path, run_duration, " (string-join (db:get-keys dbstruct) " || '/' || ") " as target from tests inner join runs on tests.run_id = runs.id where runs.runname = ? and target = ?  ;")))
   
  (db:with-db 
    dbstruct
    #f ;; this is for the main runs db
    #f ;; does not modify db
    (lambda (db)
            (sqlite3:for-each-row
	(lambda (test-name item-path test-time target )
	  (set! res (cons (vector test-name item-path test-time) res)))
	db
        qry 
	run-name target)
       res))))

;;======================================================================
;; S T E P S
;;======================================================================

(define (db:teststep-set-status! dbstruct run-id test-id teststep-name state-in status-in comment logfile)
  (db:with-db

			     0                                              ;; 2 ;; Tolerance
			     "n/a"					    ;; 3 ;; Units
			     (configf:lookup dat entry-name "message")      ;; 4 ;; Comment
			     (configf:lookup dat entry-name "exit-status")  ;; 5 ;; Status
			     "logpro"                                       ;; 6 ;; Type
			     ))))
	   (let* ((value     (or (configf:lookup dat entry-name "measured")  "n/a"))
		  (expected  (or (configf:lookup dat entry-name "expected")  "n/a"))
		  (tolerance (or (configf:lookup dat entry-name "tolerance") "n/a"))
		  (expected  (or (configf:lookup dat entry-name "expected")  0.0))
		  (tolerance (or (configf:lookup dat entry-name "tolerance") 0.0))
		  (comment   (or (configf:lookup dat entry-name "comment")
				 (configf:lookup dat entry-name "desc")      "n/a"))
		  (status    (or (configf:lookup dat entry-name "status")    "n/a"))
		  (type      (or (configf:lookup dat entry-name "expected")  "n/a")))
	     (set! res (append
			res  
			(list (list stepname

     (lambda (db)
       (sqlite3:for-each-row 
	(lambda (id test_id category variable value expected tol units comment status type)
	  (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	db
	"SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
       (reverse res)))))

;; This routine moved from tdb.scm, tdb:read-test-data
;;
(define (db:read-test-data* dbstruct run-id test-id categorypatt varpatt)
  (let* ((res '()))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (sqlite3:for-each-row 
	(lambda (id test_id category variable value expected tol units comment status type)
	  (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	db
	"SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? AND variable LIKE ? ORDER BY category,variable;" test-id categorypatt varpatt)
       (reverse res)))))


;;======================================================================
;; Misc. test related queries
;;======================================================================

(define (db:get-run-ids-matching-target dbstruct keynames target res runname testpatt statepatt statuspatt)
  (db:with-db

;; state is the priority rollup of all states
;; status is the priority rollup of all completed statesfu
;;
;; if test-name is an integer work off that instead of test-name test-path
;;
(define (db:set-state-status-and-roll-up-items dbstruct run-id test-name item-path state status comment)
  ;; establish info on incoming test followed by info on top level test
  ;; BBnote - for mode itemwait, linkage between upstream test & matching item status is propagated to run queue in db:prereqs-not-met
  
  (let* ((testdat      (if (number? test-name)
			   (db:get-test-info-by-id dbstruct run-id test-name) ;; test-name is actually a test-id
			   (db:get-test-info       dbstruct run-id test-name item-path)))
	 (test-id      (db:test-get-id testdat))
	 (test-name    (if (number? test-name)
			   (db:test-get-testname testdat)
			   test-name))
	 (item-path    (db:test-get-item-path testdat))
         (tl-testdat   (db:get-test-info dbstruct run-id test-name ""))
         (tl-test-id   (if tl-testdat
         (tl-test-id   (db:test-get-id tl-testdat)))
			   (db:test-get-id tl-testdat)
			   #f)))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
	(db:general-call dbstruct 'set-test-start-time (list test-id)))
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                 ;; NB// Pass the db so it is part fo the transaction
                 (db:test-set-state-status db run-id test-id state status comment)
                 (db:test-set-state-status db run-id test-id state status comment) ;; this call sets the item state/status
                 (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
                     (let* ((state-status-counts  (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path)) ;; item-path is used to exclude current state/status of THIS test
                     (let* ((state-status-counts  (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path state status)) ;; item-path is used to exclude current state/status of THIS test
                            (running              (length (filter (lambda (x)
                                                                    (member (dbr:counts-state x) *common:running-states*))
                                                                  state-status-counts)))
                            (bad-not-started      (length (filter (lambda (x)
                                                                    (and (equal? (dbr:counts-state x) "NOT_STARTED")
                                                                         (not (member (dbr:counts-status x)
                                                                                      *common:not-started-ok-statuses*))))
								  state-status-counts)))
                            ;; (non-completes        (filter (lambda (x)
                            ;;                                 (not (equal? (dbr:counts-state x) "COMPLETED")))
                            ;;                               state-status-counts))
                            (all-curr-states   (common:special-sort  ;; worst -> best (sort of)
                                                (delete-duplicates
                                                 (cons state (map dbr:counts-state state-status-counts)))
                                                *common:std-states* >))
                            (all-curr-statuses (common:special-sort  ;; worst -> best
                                                (delete-duplicates
                                                 (cons status (map dbr:counts-status state-status-counts)))
                                                *common:std-statuses* >))
                            (newstate          (if (> running 0)
                                                   "RUNNING"
                                                   (if (> bad-not-started 0)
                                                       "COMPLETED"
                                                       (car all-curr-states))))
                            (newstatus         (if (> bad-not-started 0)
                                                   "CHECK"
                                                   (car all-curr-statuses))))
                            (all-curr-states      (common:special-sort  ;; worst -> best (sort of)
                                                       (delete-duplicates
                                                        (if (not (equal? state "DELETED"))
                                                            (cons state (map dbr:counts-state state-status-counts))
                                                            (map dbr:counts-state state-status-counts)))
                                                       *common:std-states* >))
                            (all-curr-statuses    (common:special-sort  ;; worst -> best
                                                   (delete-duplicates
                                                    (if (not (equal? state "DELETED"))
                                                        (cons status (map dbr:counts-status state-status-counts))
                                                        (map dbr:counts-status state-status-counts)))
                                                   *common:std-statuses* >))
			    (non-completes     (filter (lambda (x)
							 (not (member x '("DELETED" "COMPLETED"))))
						       all-curr-states))
			    (num-non-completes (length non-completes))
                            
                            (newstate          (cond
						((> running 0)
						 "RUNNING") ;; anything running, call the situation running
						((> bad-not-started 0)  ;; we have an ugly situation, it is completed in the sense we cannot do more.
						 "COMPLETED") 
						((> num-non-completes 0) ;;
						 (car non-completes))  ;;  (remove (lambda (x)(equal? "COMPLETED" x)) all-curr-states)))
                                                ;; only rollup DELETED if all DELETED
						(else
						 (car all-curr-states))))
			                       ;; (if (> running 0)
                                               ;;     "RUNNING"
                                               ;;     (if (> bad-not-started 0)
                                               ;;         "COMPLETED"
                                               ;;         (car all-curr-states))))
                            (newstatus            (if (or (> bad-not-started 0)
							  (and (equal? newstate "NOT_STARTED")
							       (> num-non-completes 0)))
						      "STARTED"
                                                      (car all-curr-statuses))))
                       (debug:print-info 2 *default-log-port*
                                         "\n--> probe db:set-state-status-and-roll-up-items: "
                                         "\n--> state-status-counts: "(map dbr:counts->alist state-status-counts)
                                         "\n--> running:             "running
                                         "\n--> bad-not-started:     "bad-not-started
                                         "\n--> non-non-completes:   "num-non-completes
                                         "\n--> non-completes:       "non-completes
                                         "\n--> all-curr-states:     "all-curr-states
                                         "\n--> all-curr-statuses:     "all-curr-statuses
                                         "\n--> newstate              "newstate
                                         "\n--> newstatus            "newstatus
                                         "\n\n")

                       ;; (print "bad-not-supported: " bad-not-support " all-curr-states: " all-curr-states " all-curr-statuses: " all-curr-states)
                       ;;      " newstate: " newstate " newstatus: " newstatus)
                       ;; NB// Pass the db so it is part of the transaction
                       (if tl-test-id
                       (db:test-set-state-status db run-id tl-test-id newstate newstatus #f)))))))
			   (db:test-set-state-status db run-id tl-test-id newstate newstatus #f))))))))
                           
         (mutex-unlock! *db-transaction-mutex*)
         (if (and test-id state status (equal? status "AUTO")) 
             (db:test-data-rollup dbstruct run-id test-id status))
         tr-res)))))
;; BBnote: db:get-all-state-status-counts-for-test returns dbr:counts object aggregating state and status of items of a given test, *not including rollup state/status*
(define (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path item-state-in item-status-in)


(define (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path)
  (db:with-db
   dbstruct #f #f
   (lambda (db)
     (sqlite3:map-row
      (lambda (state status count)
	(make-dbr:counts state: state status: status count: count))
      db
      "SELECT state,status,count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND item_path !=? GROUP BY state,status;"
      run-id test-name item-path))))
  (let* ((test-info   (db:get-test-info dbstruct run-id test-name item-path))
         (item-state  (or item-state-in (db:test-get-state test-info))) 
         (item-status (or item-status-in (db:test-get-status test-info)))
         (other-items-count-recs (db:with-db
                                  dbstruct #f #f
                                  (lambda (db)
                                    (sqlite3:map-row
                                     (lambda (state status count)
                                       (make-dbr:counts state: state status: status count: count))
                                     db
                                     ;; ignore current item because we have changed its value in the current transation so this select will see the old value.
                                     "SELECT state,status,count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND item_path !=? GROUP BY state,status;"
                                     run-id test-name item-path))))

         ;; add current item to tally outside of sql query
         (match-countrec-lambda (lambda (countrec) 
                                  (and (equal? (dbr:counts-state  countrec) item-state)
                                       (equal? (dbr:counts-status countrec) item-status))))

         (already-have-count-rec-list
          (filter match-countrec-lambda other-items-count-recs)) ;; will have either 0 or 1 count recs depending if another item shares this item's state/status
         
         (updated-count-rec    (if (null? already-have-count-rec-list)
                                   (make-dbr:counts state: item-state status: item-status count: 1)
                                   (let* ((our-count-rec (car already-have-count-rec-list))
                                          (new-count (add1 (dbr:counts-count our-count-rec))))
                                     (make-dbr:counts state: item-state status: item-status count: new-count))))

         (nonmatch-countrec-lambda (lambda (countrec) (not (match-countrec-lambda countrec))))
         
         (unrelated-rec-list   
          (filter nonmatch-countrec-lambda other-items-count-recs)))
    
    (cons updated-count-rec unrelated-rec-list)))

;; (define (db:get-all-item-states db run-id test-name)
;;   (sqlite3:map-row 
;;    (lambda (a) a)
;;    db
;;    "SELECT DISTINCT state FROM tests WHERE item_path != '' AND state != 'DELETED' AND run_id=? AND testname=?"
;;    run-id test-name))

		 (dbfj   (conc dbpath "-journal")))
	    (if (handle-exceptions
		 exn
		 (begin
		   (debug:print-info 0 *default-log-port* "WARNING: failed to test for existance of " dbfj)
		   (thread-sleep! 1)
		   (db:delay-if-busy count (- count 1))) 
		 (file-exists? dbfj))
		 (common:file-exists? dbfj))
		(case count
		  ((6)
		   (thread-sleep! 0.2)
		   (db:delay-if-busy count: 5))
		  ((5)
		   (thread-sleep! 0.4)
		   (db:delay-if-busy count: 4))

;; all prereqs must be met
;;    if prereq test with itempath='' is COMPLETED and PASS, WARN, CHECK, or WAIVED then prereq is met
;;    if prereq test with itempath=ref-item-path and COMPLETED with PASS, WARN, CHECK, or WAIVED then prereq is met
;;
;; Note: mode 'normal means that tests must be COMPLETED and ok (i.e. PASS, WARN, CHECK, SKIP or WAIVED)
;;       mode 'toplevel means that tests must be COMPLETED only
;;       mode 'itemmatch or 'itemwait means that tests items must be COMPLETED and (PASS|WARN|WAIVED|CHECK) [[ NB// NOT IMPLEMENTED YET ]]
;;       mode 'exclusive means this test/item cannot run if the same test/item is LAUNCHED,REMOTEHOSTSTART or RUNNING
;; 
;; (define (db:get-prereqs-not-met dbstruct run-id waitons ref-item-path mode)
(define (db:get-prereqs-not-met dbstruct run-id waitons ref-test-name ref-item-path mode itemmaps) ;; #!key (mode '(normal))(itemmap #f))
  ;; BBnote - rollup of an itemized test's overall state/status done in db:set-state-status-and-roll-up-items
  (append
  (if (or (not waitons)
	  (null? waitons))
      '()
      (let* ((unmet-pre-reqs '())
   (if (member 'exclusive mode)
       (let ((running-tests (db:get-tests-for-run dbstruct
						  #f  ;; run-id of #f means for all runs. 
						  (if (string=? ref-item-path "")   ;; testpatt
						      ref-test-name
						      (conc ref-test-name "/" ref-item-path))
						  '("LAUNCHED" "REMOTEHOSTSTART" "RUNNING") ;; states
						  '()          ;; statuses
						  #f           ;; offset
						  #f           ;; limit
						  #f           ;; not-in
						  #f           ;; sort by
						  #f           ;; sort order
						  'shortlist   ;; query type
						  0            ;; last update, beginning of time ....
						  #f           ;; mode
						  )))
	;;(map (lambda (testdat)
	;;	(if (equal? (db:test-get-item-path testdat) "")
	;;	    (db:test-get-testname testdat)
	;;	    (conc (db:test-get-testname testdat)
	;;		  "/"
	;;		  (db:test-get-item-path testdat))))
	 running-tests) ;; calling functions want the entire data
       '())

	     (result         '()))
	(for-each 
	 (lambda (waitontest-name)
   ;; collection of: for each waiton -
   ;;   if this ref-test-name is an item in an itemized test and mode is itemwait/itemmatch:
   ;;     if waiton is not itemized - if waiton is not both completed and in ok status, add as unmet prerequisite
   ;;     if waiton is itemized:
	   ;; by getting the tests with matching name we are looking only at the matching test 
	   ;; and related sub items
	   ;; next should be using mt:get-tests-for-run?
   ;;           and waiton's items are not expanded, add as unmet prerequisite
   ;;           else if matching waiton item is not both completed and in an ok status, add as unmet prerequisite
   ;;   else
   ;;    if waiton toplevel is not in both completed and ok status, add as unmet prerequisite

	   (let ((tests             (db:get-tests-for-run-state-status dbstruct run-id waitontest-name))
		 (ever-seen         #f)
		 (parent-waiton-met #f)
		 (item-waiton-met   #f))
	     (for-each 
	      (lambda (test)
		;; (if (equal? waitontest-name (db:test-get-testname test)) ;; by defintion this had better be true ...
		(let* ((state             (db:test-get-state test))
		       (status            (db:test-get-status test))
		       (item-path         (db:test-get-item-path test))
		       (is-completed      (equal? state "COMPLETED"))
		       (is-running        (equal? state "RUNNING"))
		       (is-killed         (equal? state "KILLED"))
		       (is-ok             (member status '("PASS" "WARN" "CHECK" "WAIVED" "SKIP")))
		       ;;                                       testname-b    path-a    path-b
		       (same-itempath     (db:compare-itempaths ref-test-name item-path ref-item-path itemmaps))) ;; (equal? ref-item-path item-path)))
		  (set! ever-seen #t)
		  (cond
		   ;; case 1, non-item (parent test) is 
		   ((and (equal? item-path "") ;; this is the parent test of the waiton being examined
			 is-completed
			 (or is-ok (not (null? (lset-intersection eq? mode '(toplevel)))))) ;;  itemmatch itemwait))))))
		    (set! parent-waiton-met #t))
		   ;; Special case for toplevel and KILLED
		   ((and (equal? item-path "") ;; this is the parent test
			 is-killed
			 (member 'toplevel mode))
		    (set! parent-waiton-met #t))
		   ;; For itemwait mode IFF the previous matching item is good the set parent-waiton-met
   (if (or (not waitons)
	   (null? waitons))
       '()
       (let* ((ref-test-itemized-mode (not (null? (lset-intersection eq? mode '(itemmatch itemwait)))))
              (ref-test-toplevel-mode (not (null? (lset-intersection eq? mode '(toplevel)))))
              (ref-test-is-toplevel   (equal? ref-item-path ""))
              (ref-test-is-item       (not ref-test-is-toplevel))
              (unmet-pre-reqs '())
	      (result         '())
              (unmet-prereq-items '())
              )
	 (for-each  ; waitons
	  (lambda (waitontest-name)
	    ;; by getting the tests with matching name we are looking only at the matching test 
	    ;; and related sub items
	    ;; next should be using mt:get-tests-for-run?

            (let (;(waiton-is-itemized ...)
                  ;(waiton-items-are-expanded ...)
                  (waiton-tests             (db:get-tests-for-run-state-status dbstruct run-id waitontest-name))
		  (ever-seen         #f)
		  (parent-waiton-met #f)
		  (item-waiton-met   #f)

                  )
	      (for-each ; test expanded from waiton
	       (lambda (waiton-test) 
		 (let* ((waiton-state             (db:test-get-state waiton-test))
			(waiton-status            (db:test-get-status waiton-test))
			(waiton-item-path         (db:test-get-item-path waiton-test)) ;; BB- this is the upstream itempath
                        (waiton-is-toplevel       (equal? waiton-item-path ""))
                        (waiton-is-item           (not waiton-is-toplevel))
			(waiton-is-completed      (member waiton-state  *common:ended-states*))
			(waiton-is-running        (member waiton-state  *common:running-states*))
			(waiton-is-killed         (member waiton-state  *common:badly-ended-states*))
			(waiton-is-ok             (member waiton-status *common:well-ended-states*))
			;;                                       testname-b    path-a    path-b
			(same-itempath     (db:compare-itempaths ref-test-name waiton-item-path ref-item-path itemmaps))) ;; (equal? ref-item-path waiton-item-path)))
		   (set! ever-seen #t)
                   ;;(BB> "***consider waiton "waiton-test"/"waiton-item-path"***")
                   (cond
                    ;; case 0 - toplevel of an itemized test, at least one item in prereq has completed
                    ((and waiton-is-item ref-test-is-toplevel ref-test-itemized-mode waiton-is-completed)
                     (set! parent-waiton-met #t))

                    ;; case 1, non-item (parent test) is 
		    ((and waiton-is-toplevel ;; this is the parent test of the waiton being examined
			  waiton-is-completed
                          ;;(BB> "cond1")
			  (or waiton-is-ok ref-test-toplevel-mode)) ;;  itemmatch itemwait))))))
		     (set! parent-waiton-met #t))
		    ;; Special case for toplevel and KILLED
		    ((and waiton-is-toplevel ;; this is the parent test
			  waiton-is-killed
			  (member 'toplevel mode))
                     ;;(BB> "cond2")
		     (set! parent-waiton-met #t))
		    ;; For itemwait mode IFF the previous matching item is good the set parent-waiton-met
		   ((and (not (null? (lset-intersection eq? mode '(itemmatch itemwait)))) ;; how is that different from (member mode '(itemmatch itemwait)) ?????
			 ;; (not (equal? item-path "")) ;; this applies to both top level (to allow launching of next batch) and items
			 same-itempath)
		    (if (and is-completed is-ok)
			(set! item-waiton-met #t))
		    (if (and (equal? item-path "")
			     (or is-completed is-running));; this is the parent, set it to run if completed or running
			(set! parent-waiton-met #t)))
                    ((and ref-test-itemized-mode ref-test-is-item same-itempath)
                     ;;(BB> "cond3")
		     (if (and waiton-is-completed (or waiton-is-ok ref-test-toplevel-mode)) 
                         (set! item-waiton-met #t)
                         (set! unmet-prereq-items (cons waiton-test unmet-prereq-items)))
                     (if (and waiton-is-toplevel ;; if upstream rollup test is completed, parent-waiton-met is set
			      (or waiton-is-completed waiton-is-running))
			 (set! parent-waiton-met #t)))
		    ;; normal checking of parent items, any parent or parent item not ok blocks running
		    ((and waiton-is-completed
			  (or waiton-is-ok 
			      (member 'toplevel mode))              ;; toplevel does not block on FAIL
			  (and waiton-is-ok (member 'itemmatch mode) ;; itemmatch blocks on not ok
                               ))
                     ;;(BB> "cond4")
		     (set! item-waiton-met #t))

                    ((and waiton-is-completed waiton-is-ok same-itempath)
                     ;;(BB> "cond5")
                     (set! item-waiton-met #t))
                    (else
                     #t
                     ;;(BB> "condelse")
                     ))))
               waiton-tests)
	      ;; both requirements, parent and item-waiton must be met to NOT add item to
	      ;; prereq's not met list
               ;; (BB>
               ;;  "\n* waiton-tests           "waiton-tests
               ;;  "\n* parent-waiton-met      "parent-waiton-met
		   ;; normal checking of parent items, any parent or parent item not ok blocks running
		   ((and is-completed
			 (or is-ok 
			     (member 'toplevel mode))              ;; toplevel does not block on FAIL
			 (and is-ok (member 'itemmatch mode))) ;; itemmatch blocks on not ok
		    (set! item-waiton-met #t)))))
		tests)
	     ;; both requirements, parent and item-waiton must be met to NOT add item to
	     ;; prereq's not met list
	     (if (not (or parent-waiton-met item-waiton-met))
		 (set! result (append (if (null? tests) (list waitontest-name) tests) result)))
	     ;; if the test is not found then clearly the waiton is not met...
	     ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
	     (if (not ever-seen)
		 (set! result (append (if (null? tests)(list waitontest-name) tests) result)))))
	 waitons)
	(delete-duplicates result))))
               ;;  "\n* item-waiton-met        "item-waiton-met
               ;;  "\n* ever-seen              "ever-seen
               ;;  "\n* ref-test-itemized-mode "ref-test-itemized-mode
               ;;  "\n* unmet-prereq-items     "unmet-prereq-items
               ;;  "\n* result (pre)           "result
               ;;  "\n* ever-seen              "ever-seen
               ;;  "\n")

              (cond
               ((and ref-test-itemized-mode ref-test-is-item (not (null? unmet-prereq-items)))
                (set! result (append unmet-prereq-items result)))
               ((not (or parent-waiton-met item-waiton-met))
                (set! result (append (if (null? waiton-tests) (list waitontest-name) waiton-tests) result))) ;; appends the string if the full record is not available
	      ;; if the test is not found then clearly the waiton is not met...
	      ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
               ((not ever-seen)
                (set! result (append (if (null? waiton-tests)(list waitontest-name) waiton-tests) result))))))
	  waitons)
	 (delete-duplicates result)))))

;;======================================================================
;; Just for sync, procedures to make sync easy
;;======================================================================

;; get an alist of record ids changed since time since-time
;;   '((runs . (1 2 3 ...))(steps . (5 6 7 ...) ...))
;;
(define (db:get-changed-record-ids dbstruct since-time)
  ;; no transaction, allow the db to be accessed between the big queries
  (let ((backcons (lambda (lst item)(cons item lst))))
    (db:with-db
     dbstruct #f #f 
     (lambda (db)
       `((runs       . ,(fold-row backcons '() db "SELECT id FROM runs  WHERE last_update>?" since-time))
	 (tests      . ,(fold-row backcons '() db "SELECT id FROM tests WHERE last_update>?" since-time))
	 (test_steps . ,(fold-row backcons '() db "SELECT id FROM test_steps WHERE last_update>?" since-time))
	 (test_data  . ,(fold-row backcons '() db "SELECT id FROM test_data  WHERE last_update>?" since-time))
	 ;; (test_meta  . ,(fold-row backcons '() db "SELECT id FROM test_meta  WHERE last_update>?" since-time))
	 (run_stats  . ,(fold-row backcons '() db "SELECT id FROM run_stats  WHERE last_update>?" since-time))
	 )))))

;;======================================================================
;; Extract ods file from the db
;;======================================================================

;; NOT REWRITTEN YET!!!!!

								      (append res (list (vector-ref vb (+ i 2))))))))
					       (runname   (vector-ref vb 1))
					       (testname  (vector-ref vb (+  2 numkeys)))
					       (item-path (vector-ref vb (+  3 numkeys)))
					       (final-log (vector-ref vb (+  7 numkeys)))
					       (run-dir   (vector-ref vb (+ 18 numkeys)))
					       (log-fpath (conc run-dir "/"  final-log))) ;; (string-intersperse keyvals "/") "/" testname "/" item-path "/"
					  (debug:print 4 *default-log-port* "log: " log-fpath " exists: " (file-exists? log-fpath))
					  (vector-set! vb (+ 7 numkeys) (if (file-exists? log-fpath)
					  (debug:print 4 *default-log-port* "log: " log-fpath " exists: " (common:file-exists? log-fpath))
					  (vector-set! vb (+ 7 numkeys) (if (common:file-exists? log-fpath)
									    (let ((newpath (conc pathmod "/"
												 (string-intersperse keyvals "/")
												 "/" runname "/" testname "/"
												 (if (string=? item-path "") "" (conc "/" item-path))
												 final-log)))
									      ;; for now throw away newpath and use the log-fpath conc'd with pathmod
									      (set! newpath (conc pathmod log-fpath))

     (if (string-match (regexp "^[/~]+.*") outputfile) ;; full path?
	 outputfile
	 (begin
	   (debug:print 0 *default-log-port* "WARNING: path given, " outputfile " is relative, prefixing with current directory")
	   (conc (current-directory) "/" outputfile)))
     results)
    ;; brutal clean up
    (stack-push! (dbr:dbstruct-dbstack dbstruct) dbdat)
    (system "rm -rf tempdir")))

;; (db:extract-ods-file db "outputfile.ods" '(("sysname" "%")("fsname" "%")("datapath" "%")) "%")