Megatest

;;
;;  grep define ../rmt.scm | grep rmt: |perl -pi -e 's/\(define\s+\((\S+)\W.*$/\1/'|sort -u

;;======================================================================
;;  S U P P O R T   F U N C T I O N S
;;======================================================================

;; if a server is either running or in the process of starting call client:setup
;; else return #f to let the calling proc know that there is no server available
;;
(define (rmt:get-connection-info areapath #!key (area-dat #f)) ;; TODO: push areapath down.
  (let* ((runremote (or area-dat *runremote*))
	 (cinfo     (if (remote? runremote)
			(remote-conndat runremote)
			#f)))
	  (if cinfo
	      cinfo
	      (if (server:check-if-running areapath)
		  (client:setup areapath)
		  #f))))

(define *send-receive-mutex* (make-mutex)) ;; should have separate mutex per run-id



;; this entry point can decide based on cmd whether to dispatch to old api calls via remote or via ulex
;;
(define (rmt:send-receive cmd rid params #!key (attemptnum 1)(area-dat #f))
  (let* ((areapath      *toppath*);; TODO - resolve from dbstruct to be compatible with multiple areas
	 (runremote     (or area-dat
			    *runremote*)))
    ;; ensure we have a record for our connection for given area
    (if (not runremote)                   ;; can remove this one. should never get here.         
	(begin
	  (set! *runremote* (make-remote))
	  (set! runremote   *runremote*)
	  (remote-server-timeout-set! runremote (server:expiration-timeout))
	  (remote-hh-dat-set!         runremote (common:get-homehost ))
	  )) ;; new runremote will come from this on next iteration
    
    (if (member cmd '(blah))
      (begin
	(mutex-lock! *send-receive-mutex*)
	(if (not *runremote*)(set! *runremote* (make-remote)))
	(let ((ulex:conn (remote-ulex:conn *runremote*)))
	  (if (not ulex:conn)(remote-ulex:conn-set! *runremote* (rmtmod:setup-ulex areapath)))
	  (rmtmod:send-receive-ulex ulex:conn cmd rid params attemptnum area-dat)))
      (rmt:send-receive-orig *default-log-port* runremote *rmt-mutex* areapath *db-multi-sync-mutex* cmd rid params attemptnum: attemptnum area-dat: area-dat ro-queries: api:read-only-queries))))

;; RA => e.g. usage (rmt:send-receive 'get-var #f (list varname))
;;
;;  add multi-sync-mutex 
;;
(define (rmt:send-receive-orig log-port runremote rmt-mutex toppath multi-sync-mutex cmd rid params #!key (attemptnum 1)(area-dat #f)) ;; start attemptnum at 1 so the modulo below works as expected

  #;(common:telemetry-log (conc "rmt:"(->string cmd))
                        payload: `((rid . ,rid)
                                   (params . ,params)))
                          
  
  ;; do all the prep locked under the rmt-mutex
  ;;(mutex-lock! rmt-mutex)
  
  ;; 1. check if server is started IFF cmd is a write OR if we are not on the homehost, store in runremote
  ;; 2. check the age of the connections. refresh the connection if it is older than timeout-20 seconds.
  ;; 3. do the query, if on homehost use local access
  ;;
  (let* ((start-time    (current-seconds)) ;; snapshot time so all use cases get same value

	 (readonly-mode (rmtmod:calc-ro-mode runremote toppath)))

    ;; ensure we have a homehost record

    (if (not (pair? (remote-hh-dat runremote)))  ;; not on homehost
	(remote-hh-dat-set! runremote (common:get-homehost)))
    
    ;;(print "BB> readonly-mode is "readonly-mode" dbfile is "dbfile)
    (cond
     ;; give up if more than 15 attempts
     ((> attemptnum 15)
      (debug:print 0 log-port "ERROR: 15 tries to start/connect to server. Giving up.")
      (exit 1))

     ;; readonly mode, read request-  handle it - case 2
     ((and readonly-mode
           (member cmd api:read-only-queries)) 
      ;; (mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case 2")
      (rmt:open-qry-close-locally log-port multi-sync-mutex cmd 0 params ro-queries: api:read-only-queries)
      )

     ;; readonly mode, write request.  Do nothing, return #f
     (readonly-mode (extras-readonly-mode rmt-mutex log-port cmd params))

     ;; This block was for pre-emptively resetting the connection if there had been no communication for some time.
     ;; I don't think it adds any value. If the server is not there, just fail and start a new connection.
     ;; also, the expire-time calculation might not be correct. We want, time-since-last-server-access > (server:get-timeout)
     ;;
     ;; reset the connection if it has been unused too long
     ((and runremote
           (remote-conndat runremote)
	   (> (current-seconds) ;; if it has been more than server-timeout seconds since last contact, close this connection and start a new on
	      (+ (http-transport:server-dat-get-last-access (remote-conndat runremote))
		 (remote-server-timeout runremote))))
      (debug:print-info 0 log-port "Connection to " (remote-server-url runremote) " expired due to no accesses, forcing new connection.")
      (http-transport:close-connections area-dat: runremote)
      (remote-conndat-set! runremote #f) ;; invalidate the connection, thus forcing a new connection.
      ;; (mutex-unlock! rmt-mutex)
      (rmt:send-receive-orig log-port runremote rmt-mutex toppath multi-sync-mutex cmd rid params attemptnum: attemptnum))
     

     ;; on homehost and this is a read
     ((and (not (remote-force-server runremote)) ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))       ;; on homehost
           (member cmd api:read-only-queries))   ;; this is a read
      ;; (mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case  5")
      (rmt:open-qry-close-locally log-port multi-sync-mutex cmd 0 params ro-queries: api:read-only-queries))

     ;; on homehost and this is a write, we already have a server, but server has died
     ((and (cdr (remote-hh-dat runremote))           ;; on homehost
           (not (member cmd api:read-only-queries))  ;; this is a write
           (remote-server-url runremote)             ;; have a server
           (not (server:ping (remote-server-url runremote))))  ;; server has died. NOTE: this is not a cheap call! Need better approach.
      (set! *runremote* (make-remote))
      (remote-force-server-set! runremote (common:force-server?))
      ;; (mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case  6")
      (rmt:send-receive-orig log-port runremote rmt-mutex toppath  multi-sync-mutex cmd rid params attemptnum: attemptnum))

     ;; on homehost and this is a write, we already have a server
     ((and (not (remote-force-server runremote))     ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))           ;; on homehost
           (not (member cmd api:read-only-queries))  ;; this is a write
           (remote-server-url runremote))            ;; have a server
      ;;(mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case  4.1")
      (rmt:open-qry-close-locally  log-port multi-sync-mutex cmd 0 params ro-queries: api:read-only-queries))

     ;;  on homehost, no server contact made and this is a write, passively start a server 
     ((and (not (remote-force-server runremote))     ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))           ;; have homehost
           (not (remote-server-url runremote))       ;; no connection yet
	   (not (member cmd api:read-only-queries))) ;; not a read-only query
      (debug:print-info 12 log-port "rmt:send-receive, case  8")
      (let ((server-url  (server:check-if-running toppath))) ;; (server:read-dotserver->url toppath))) ;; (server:check-if-running toppath))) ;; Do NOT want to run server:check-if-running - very expensive to do for every write call
	(if server-url
	    (remote-server-url-set! runremote server-url) ;; the string can be consumed by the client setup if needed
	    (if (common:force-server?)
		(server:start-and-wait toppath)
		(server:kind-run toppath))))
      (remote-force-server-set! runremote (common:force-server?))
      ;; (mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case  8.1")
      (rmt:open-qry-close-locally  log-port multi-sync-mutex cmd 0 params ro-queries: api:read-only-queries))

     ((or (and (remote-force-server runremote)              ;; we are forcing a server and don't yet have a connection to one
	       (not (remote-conndat runremote)))
	  (and (not (cdr (remote-hh-dat runremote)))        ;; not on a homehost 
	       (not (remote-conndat runremote))))           ;; and no connection
      (debug:print-info 12 log-port "rmt:send-receive, case 9, hh-dat: " (remote-hh-dat runremote) " conndat: " (remote-conndat runremote))
      ;;(mutex-unlock! rmt-mutex)
      (if (not (server:check-if-running toppath)) ;; who knows, maybe one has started up?
	  (server:start-and-wait toppath))
      (remote-conndat-set! runremote (rmt:get-connection-info toppath)) ;; calls client:setup which calls client:setup-http
      (rmt:send-receive-orig log-port runremote rmt-mutex toppath multi-sync-mutex cmd rid params attemptnum: attemptnum)) ;; TODO: add back-off timeout as

     ;; all set up if get this far, dispatch the query
     ((and (not (remote-force-server runremote))
	   (cdr (remote-hh-dat runremote))) ;; we are on homehost
      ;;(mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case 10")
      (rmt:open-qry-close-locally  log-port multi-sync-mutex cmd (if rid rid 0) params ro-queries: api:read-only-queries))

     ;; not on homehost, do server query
     (else (extras-case-11 log-port runremote cmd params attemptnum rid)))))

;; bunch of small functions factored out of send-receive to make debug easier
;;

(define (extras-case-11 *default-log-port* runremote cmd params attemptnum rid)
  ;; (mutex-unlock! *rmt-mutex*)
  (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9")
  ;; (mutex-lock! *rmt-mutex*)
  (let* ((conninfo (remote-conndat runremote))
	 (dat      (case (remote-transport runremote)
		     ((http) (condition-case ;; handling here has
					     ;; caused a lot of
					     ;; problems. However it
					     ;; is needed to deal with
					     ;; attemtped
					     ;; communication to
					     ;; servers that have gone
					     ;; away
			      (http-transport:client-api-send-receive 0 conninfo cmd params)
			      ((commfail)(vector #f "communications fail"))
			      ((exn)(vector #f "other fail" (print-call-chain)))))
		     (else
		      (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport runremote) " not supported")
		      (exit))))
	 (success  (if (vector? dat) (vector-ref dat 0) #f))
	 (res      (if (vector? dat) (vector-ref dat 1) #f)))
    (if (and (vector? conninfo) (< 5 (vector-length conninfo)))
	(http-transport:server-dat-update-last-access conninfo) ;; refresh access time
	(begin
	  (debug:print 0 *default-log-port* "INFO: Should not get here! conninfo=" conninfo)
	  (set! conninfo #f)
	  (remote-conndat-set! *runremote* #f) ;; NOTE: *runremote* is global copy of runremote. Purpose: factor out global.
	  (http-transport:close-connections  area-dat: runremote)))
    (debug:print-info 13 *default-log-port* "rmt:send-receive, case  9. conninfo=" conninfo " dat=" dat " runremote = " runremote)
    (mutex-unlock! *rmt-mutex*)
    (if success ;; success only tells us that the transport was
	;; successful, have to examine the data to see if
	;; there was a detected issue at the other end
	(extras-transport-succeded *default-log-port* *rmt-mutex* attemptnum runremote res params rid cmd)
	(extras-transport-failed *default-log-port* *rmt-mutex* attemptnum runremote cmd rid params)
	)))

;; (define (rmt:update-db-stats run-id rawcmd params duration)
;;   (mutex-lock! *db-stats-mutex*)
;;   (handle-exceptions
;;    exn
;;    (begin
;;      (debug:print 0 *default-log-port* "WARNING: stats collection failed in update-db-stats")
;;      (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))

(define (rmt:test-set-archive-block-id run-id test-id archive-block-id)
  (rmt:send-receive 'test-set-archive-block-id run-id (list run-id test-id archive-block-id)))

(define (rmt:test-get-archive-block-info archive-block-id)
  (rmt:send-receive 'test-get-archive-block-info #f (list archive-block-id)))

(set-functions rmt:send-receive                       remote-server-url-set!
	       http-transport:close-connections	      remote-conndat-set!


	       debug:print                            debug:print-info
	       debug:print-error 
	       remote-ro-mode                         remote-ro-mode-set!
	       remote-ro-mode-checked-set!            remote-ro-mode-checked

	       #f                                     #f
	       api:execute-requests                   api:read-only-queries)