| ︙ | | | ︙ | |
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
|
;;======================================================================
;; Database access
;;======================================================================
;; dbstruct vector containing all the relevant dbs like main.db, megatest.db, run.db etc
(use (srfi 18) extras tcp) ;; RADT => use of require-extension?
(use sqlite3 srfi-1 posix regex regex-case srfi-69 csv-xml s11n md5 message-digest base64 format dot-locking z3 typed-records)
(import (prefix sqlite3 sqlite3:))
(import (prefix base64 base64:)) ;; RADT => prefix??
(declare (unit db))
(declare (uses common))
(declare (uses keys))
|
|
|
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
|
;;======================================================================
;; Database access
;;======================================================================
;; dbstruct vector containing all the relevant dbs like main.db, megatest.db, run.db etc
(use (srfi 18) extras tcp stack) ;; RADT => use of require-extension?
(use sqlite3 srfi-1 posix regex regex-case srfi-69 csv-xml s11n md5 message-digest base64 format dot-locking z3 typed-records)
(import (prefix sqlite3 sqlite3:))
(import (prefix base64 base64:)) ;; RADT => prefix??
(declare (unit db))
(declare (uses common))
(declare (uses keys))
|
| ︙ | | | ︙ | |
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
|
;; R E C O R D S
;;======================================================================
;; each db entry is a pair ( db . dbfilepath )
;; I propose this record evolves into the area record
;;
(defstruct dbr:dbstruct
(tmpdb #f)
(mtdb #f)
(refndb #f)
(homehost #f) ;; not used yet
(on-homehost #f) ;; not used yet
) ;; goal is to converge on one struct for an area but for now it is too confusing
|
|
>
|
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
|
;; R E C O R D S
;;======================================================================
;; each db entry is a pair ( db . dbfilepath )
;; I propose this record evolves into the area record
;;
(defstruct dbr:dbstruct
;; (tmpdb #f)
(dbstack #f) ;; stack for tmp db handles, do not initialize with a stack
(mtdb #f)
(refndb #f)
(homehost #f) ;; not used yet
(on-homehost #f) ;; not used yet
) ;; goal is to converge on one struct for an area but for now it is too confusing
|
| ︙ | | | ︙ | |
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
|
;; Get/open a database
;; if run-id => get run specific db
;; if #f => get main db
;; if db already open - return inmem
;; if db not open, open inmem, rundb and sync then return inmem
;; inuse gets set automatically for rundb's
;;
(define (db:get-db dbstruct . blah) ;; run-id)
(or (dbr:dbstruct-tmpdb dbstruct)
(db:open-db dbstruct)))
;; ;; legacy handling of structure for managing db's. Refactor this into dbr:?
(define (db:dbdat-get-db dbdat)
(if (pair? dbdat)
(car dbdat)
dbdat))
|
|
|
>
>
>
>
>
|
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
|
;; Get/open a database
;; if run-id => get run specific db
;; if #f => get main db
;; if db already open - return inmem
;; if db not open, open inmem, rundb and sync then return inmem
;; inuse gets set automatically for rundb's
;;
(define (db:get-db dbstruct) ;; run-id)
(if (stack? (dbr:dbstruct-dbstack dbstruct))
(if (stack-empty? (dbr:dbstruct-dbstack dbstruct))
(let ((newdb (db:open-megatest-db path: (db:dbfile-path))))
(stack-push! (dbr:dbstruct-dbstack dbstruct) newdb)
newdb)
(stack-pop! (dbr:dbstruct-dbstack dbstruct)))
(db:open-db dbstruct)))
;; ;; legacy handling of structure for managing db's. Refactor this into dbr:?
(define (db:dbdat-get-db dbdat)
(if (pair? dbdat)
(car dbdat)
dbdat))
|
| ︙ | | | ︙ | |
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
|
;; (dbr:dbstruct-inuse-set! dbstruct #f)
;; (mutex-unlock! *rundb-mutex*))))
;; (db:with-db dbstruct run-id sqlite3:exec "select blah fgrom blaz;")
;; r/w is a flag to indicate if the db is modified by this query #t = yes, #f = no
;;
(define (db:with-db dbstruct run-id r/w proc . params)
(let* ((dbdat (if (dbr:dbstruct? dbstruct)
(db:get-db dbstruct run-id)
(begin
(print-call-chain)
(print "db:with-db called with dbdat instead of dbstruct, FIXME!!")
dbstruct))) ;; cheat, allow for passing in a dbdat
)
(if use-mutex (mutex-lock! *db-with-db-mutex*))
(let ((res (apply proc db params)))
(if use-mutex (mutex-unlock! *db-with-db-mutex*))
;; (if (vector? dbstruct)(db:done-with dbstruct run-id r/w))
res))))
;;======================================================================
;; K E E P F I L E D B I N dbstruct
;;======================================================================
;; (define (db:get-filedb dbstruct run-id)
|
<
|
<
<
<
<
>
|
>
|
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
|
;; (dbr:dbstruct-inuse-set! dbstruct #f)
;; (mutex-unlock! *rundb-mutex*))))
;; (db:with-db dbstruct run-id sqlite3:exec "select blah fgrom blaz;")
;; r/w is a flag to indicate if the db is modified by this query #t = yes, #f = no
;;
(define (db:with-db dbstruct run-id r/w proc . params)
(let* ((dbdat (db:get-db dbstruct))
(db (db:dbdat-get-db dbdat))
(use-mutex (> *api-process-request-count* 25)))
(if (and use-mutex
(common:low-noise-print 120 "over-50-parallel-api-requests"))
(debug:print-info 0 *default-log-port* *api-process-request-count* " parallel api requests being processed in process " (current-process-id) ", throttling access"))
(if (common:low-noise-print 120 (conc "parallel-api-requests" *max-api-process-requests*))
(debug:print-info 0 *default-log-port* "Parallel api request count: " *api-process-request-count* " max parallel requests: " *max-api-process-requests*))
(handle-exceptions
exn
(begin
(print-call-chain (current-error-port))
(debug:print-error 0 *default-log-port* "sqlite3 issue in db:with-db, dbstruct=" dbstruct ", run-id=" run-id ", proc=" proc ", params=" params " error: " ((condition-property-accessor 'exn 'message) exn))
;; there is no recovering at this time. exit
(exit 50))
(if use-mutex (mutex-lock! *db-with-db-mutex*))
(let ((res (apply proc db params)))
(if use-mutex (mutex-unlock! *db-with-db-mutex*))
;; (if (vector? dbstruct)(db:done-with dbstruct run-id r/w))
(stack-push! (dbr:dbstruct-dbstack dbstruct) dbdat)
res))))
;;======================================================================
;; K E E P F I L E D B I N dbstruct
;;======================================================================
;; (define (db:get-filedb dbstruct run-id)
|
| ︙ | | | ︙ | |
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
|
;; NB// #f => return dbdir only
;; (was planned to be; zeroth db with name=main.db)
;;
;; If run-id is #f return to create and retrieve the path where the db will live.
;;
(define (db:dbfile-path . junk) ;; run-id)
(let* ((dbdir (common:get-db-tmp-area))) ;; (db:get-dbdir))
;; (fname (if run-id
;; (if (eq? run-id 0) "main.db" (conc run-id ".db"))
;; #f)))
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* "Couldn't create path to " dbdir)
(exit 1))
(if (not (directory? dbdir))(create-directory dbdir #t)))
dbdir)) ;; (if fname
;; (conc dbdir "/" fname)
;; dbdir)))
;; Returns the database location as specified in config file
;;
;; (define db:get-dbdir common:get-db-tmp-area)
;; (or (configf:lookup *configdat* "setup" "dbdir")
;; (conc (configf:lookup *configdat* "setup" "linktree") "/.db")))
|
|
<
<
<
|
<
<
<
<
<
<
<
<
|
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
|
;; NB// #f => return dbdir only
;; (was planned to be; zeroth db with name=main.db)
;;
;; If run-id is #f return to create and retrieve the path where the db will live.
;;
(define (db:dbfile-path . junk) ;; run-id)
(let* ((dbdir (common:get-db-tmp-area)))
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* "Couldn't create path to " dbdir)
(exit 1))
(if (not (directory? dbdir))(create-directory dbdir #t)))
dbdir))
(define (db:set-sync db)
(let ((syncprag (configf:lookup *configdat* "setup" "sychronous")))
(sqlite3:execute db (conc "PRAGMA synchronous = " (or syncprag 0) ";"))))
;; open an sql database inside a file lock
;; returns: db existed-prior-to-opening
;; RA => Returns a db handler; sets the lock if opened in writable mode
|
| ︙ | | | ︙ | |
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
|
;; ;;; (mutex-unlock! *rundb-mutex*) ;;; why did we need a mutex on opening db's?
;; (db:sync-tables db:sync-tests-only *megatest-db* db)
;; db))
;; This routine creates the db if not already present. It is only called if the db is not already opened
;;
(define (db:open-db dbstruct #!key (areapath #f))
(let ((tmpdb (dbr:dbstruct-tmpdb dbstruct))) ;; RA => Returns the first reference in dbstruct
(if tmpdb
tmpdb
;; (mutex-lock! *rundb-mutex*)
(let* ((dbpath (db:dbfile-path)) ;; 0))
(dbexists (file-exists? dbpath))
(dbfexists (file-exists? (conc dbpath "/megatest.db")))
(tmpdb (db:open-megatest-db path: dbpath)) ;; lock-create-open dbpath db:initialize-main-db))
(mtdb (db:open-megatest-db))
(refndb (db:open-megatest-db path: dbpath name: "megatest_ref.db"))
(write-access (file-write-access? dbpath)))
(if (and dbexists (not write-access))
(set! *db-write-access* #f))
(dbr:dbstruct-mtdb-set! dbstruct mtdb)
(dbr:dbstruct-tmpdb-set! dbstruct tmpdb) ;; olddb is already a (cons db path)
(dbr:dbstruct-refndb-set! dbstruct refndb)
;; (mutex-unlock! *rundb-mutex*)
(if (and (not dbfexists)
write-access) ;; *db-write-access*) ;; did not have a prior db and do have write access
(begin
(debug:print 0 *default-log-port* "filling db " (db:dbdat-get-path tmpdb) " with data from " (db:dbdat-get-path mtdb))
(db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb refndb tmpdb))
|
|
<
|
<
>
>
|
|
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
|
;; ;;; (mutex-unlock! *rundb-mutex*) ;;; why did we need a mutex on opening db's?
;; (db:sync-tables db:sync-tests-only *megatest-db* db)
;; db))
;; This routine creates the db if not already present. It is only called if the db is not already opened
;;
(define (db:open-db dbstruct #!key (areapath #f))
(let ((tmpdb-stack (dbr:dbstruct-dbstack dbstruct))) ;; RA => Returns the first reference in dbstruct
(if (stack? tmpdb-stack)
(db:get-db tmpdb-stack) ;; get previously opened db (will create new db handle if all in the stack are already used
(let* ((dbpath (db:dbfile-path)) ;; 0))
(dbexists (file-exists? dbpath))
(dbfexists (file-exists? (conc dbpath "/megatest.db")))
(tmpdb (db:open-megatest-db path: dbpath)) ;; lock-create-open dbpath db:initialize-main-db))
(mtdb (db:open-megatest-db))
(refndb (db:open-megatest-db path: dbpath name: "megatest_ref.db"))
(write-access (file-write-access? dbpath)))
(if (and dbexists (not write-access))
(set! *db-write-access* #f))
(dbr:dbstruct-mtdb-set! dbstruct mtdb)
(dbr:dbstruct-dbstack-set! dbstruct (make-stack))
(stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb) ;; olddb is already a (cons db path)
(dbr:dbstruct-refndb-set! dbstruct refndb)
;; (mutex-unlock! *rundb-mutex*)
(if (and (not dbfexists)
write-access) ;; *db-write-access*) ;; did not have a prior db and do have write access
(begin
(debug:print 0 *default-log-port* "filling db " (db:dbdat-get-path tmpdb) " with data from " (db:dbdat-get-path mtdb))
(db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb refndb tmpdb))
|
| ︙ | | | ︙ | |
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
|
(if (and dbexists (not write-access))
(set! *db-write-access* #f))
(cons db dbpath)))
;; sync run to disk if touched
;;
(define (db:sync-touched dbstruct run-id #!key (force-sync #f))
(let ((tmpdb (dbr:dbstruct-tmpdb dbstruct))
(mtdb (dbr:dbstruct-mtdb dbstruct))
(refndb (dbr:dbstruct-refndb dbstruct))
(start-t (current-seconds)))
(debug:print-info 4 *default-log-port* "Syncing for run-id: " run-id)
(mutex-lock! *db-multi-sync-mutex*)
(let ((update_info (cons (if force-sync 0 *db-last-sync*) "last_update")))
(mutex-unlock! *db-multi-sync-mutex*)
(db:sync-tables (db:sync-all-tables-list dbstruct) update_info tmpdb refndb mtdb))
(mutex-lock! *db-multi-sync-mutex*)
(set! *db-last-sync* start-t)
(set! *db-last-access* start-t)
(mutex-unlock! *db-multi-sync-mutex*)))
;; close all opened run-id dbs
(define (db:close-all dbstruct)
(if (dbr:dbstruct? dbstruct)
(begin
;; (db:sync-touched dbstruct 0 force-sync: #t) ;; NO. Do not do this here. Instead we rely on a server to be started when there are writes, even if the server itself is not going to be used as a server.
(let ((tdb (db:dbdat-get-db (dbr:dbstruct-tmpdb dbstruct)))
(mdb (db:dbdat-get-db (dbr:dbstruct-mtdb dbstruct)))
(rdb (db:dbdat-get-db (dbr:dbstruct-refndb dbstruct))))
(if tdb (sqlite3:finalize! tdb))
(if mdb (sqlite3:finalize! mdb))
(if rdb (sqlite3:finalize! rdb))))))
;; (let ((locdbs (dbr:dbstruct-locdbs dbstruct)))
;; (if (hash-table? locdbs)
;; (for-each (lambda (run-id)
;; (db:close-run-db dbstruct run-id))
|
|
|
>
|
>
|
|
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
|
(if (and dbexists (not write-access))
(set! *db-write-access* #f))
(cons db dbpath)))
;; sync run to disk if touched
;;
(define (db:sync-touched dbstruct run-id #!key (force-sync #f))
(let ((tmpdb (db:get-db dbstruct))
(mtdb (dbr:dbstruct-mtdb dbstruct))
(refndb (dbr:dbstruct-refndb dbstruct))
(start-t (current-seconds)))
(debug:print-info 4 *default-log-port* "Syncing for run-id: " run-id)
(mutex-lock! *db-multi-sync-mutex*)
(let ((update_info (cons (if force-sync 0 *db-last-sync*) "last_update")))
(mutex-unlock! *db-multi-sync-mutex*)
(db:sync-tables (db:sync-all-tables-list dbstruct) update_info tmpdb refndb mtdb))
(mutex-lock! *db-multi-sync-mutex*)
(set! *db-last-sync* start-t)
(set! *db-last-access* start-t)
(mutex-unlock! *db-multi-sync-mutex*)
(stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb)))
;; close all opened run-id dbs
(define (db:close-all dbstruct)
(if (dbr:dbstruct? dbstruct)
(begin
;; (db:sync-touched dbstruct 0 force-sync: #t) ;; NO. Do not do this here. Instead we rely on a server to be started when there are writes, even if the server itself is not going to be used as a server.
(let ((tdbs (map db:dbdat-get-db
(stack->list (dbr:dbstruct-dbstack dbstruct))))
(mdb (db:dbdat-get-db (dbr:dbstruct-mtdb dbstruct)))
(rdb (db:dbdat-get-db (dbr:dbstruct-refndb dbstruct))))
(map sqlite3:finalize! tdbs)
(if mdb (sqlite3:finalize! mdb))
(if rdb (sqlite3:finalize! rdb))))))
;; (let ((locdbs (dbr:dbstruct-locdbs dbstruct)))
;; (if (hash-table? locdbs)
;; (for-each (lambda (run-id)
;; (db:close-run-db dbstruct run-id))
|
| ︙ | | | ︙ | |
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
|
;;
;; run-ids: '(1 2 3 ...) or #f (for all)
;;
(define (db:multi-db-sync dbstruct . options)
(if (not (launch:setup))
(debug:print 0 *default-log-port* "ERROR: not able to setup up for megatest.")
(let* ((mtdb (dbr:dbstruct-mtdb dbstruct))
(tmpdb (dbr:dbstruct-tmpdb dbstruct))
(refndb (dbr:dbstruct-refndb dbstruct))
(allow-cleanup #t) ;; (if run-ids #f #t))
(tdbdat (tasks:open-db))
(servers (tasks:get-all-servers (db:delay-if-busy tdbdat)))
(data-synced 0)) ;; count of changed records (I hope)
;; kill servers
|
|
|
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
|
;;
;; run-ids: '(1 2 3 ...) or #f (for all)
;;
(define (db:multi-db-sync dbstruct . options)
(if (not (launch:setup))
(debug:print 0 *default-log-port* "ERROR: not able to setup up for megatest.")
(let* ((mtdb (dbr:dbstruct-mtdb dbstruct))
(tmpdb (db:get-db dbstruct))
(refndb (dbr:dbstruct-refndb dbstruct))
(allow-cleanup #t) ;; (if run-ids #f #t))
(tdbdat (tasks:open-db))
(servers (tasks:get-all-servers (db:delay-if-busy tdbdat)))
(data-synced 0)) ;; count of changed records (I hope)
;; kill servers
|
| ︙ | | | ︙ | |
950
951
952
953
954
955
956
957
958
959
960
961
962
963
|
;; (begin
;; (debug:print 0 *default-log-port* "Removing database file for deleted run " fullname)
;; (delete-file fullname)))))
;; dead-runs))))
;;
;; (db:close-all dbstruct)
;; (sqlite3:finalize! mdb)
data-synced)))
;; keeping it around for debugging purposes only
(define (open-run-close-no-exception-handling proc idb . params)
(debug:print-info 11 *default-log-port* "open-run-close-no-exception-handling START given a db=" (if idb "yes " "no ") ", params=" params)
(print "I don't work anymore. open-run-close-no-exception-handling needs fixing or removing...")
(exit)
|
>
|
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
|
;; (begin
;; (debug:print 0 *default-log-port* "Removing database file for deleted run " fullname)
;; (delete-file fullname)))))
;; dead-runs))))
;;
;; (db:close-all dbstruct)
;; (sqlite3:finalize! mdb)
(stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb)
data-synced)))
;; keeping it around for debugging purposes only
(define (open-run-close-no-exception-handling proc idb . params)
(debug:print-info 11 *default-log-port* "open-run-close-no-exception-handling START given a db=" (if idb "yes " "no ") ", params=" params)
(print "I don't work anymore. open-run-close-no-exception-handling needs fixing or removing...")
(exit)
|
| ︙ | | | ︙ | |
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
|
;;======================================================================
;; dneeded is minimum space needed, scan for existing archives that
;; are on disks with adequate space and already have this test/itempath
;; archived
;;
(define (db:archive-get-allocations dbstruct testname itempath dneeded)
(let* ((dbdat (db:get-db dbstruct #f)) ;; archive tables are in main.db
(db (db:dbdat-get-db dbdat))
(res '())
(blocks '())) ;; a block is an archive chunck that can be added too if there is space
(sqlite3:for-each-row
(lambda (id archive-disk-id disk-path last-du last-du-time)
(set! res (cons (vector id archive-disk-id disk-path last-du last-du-time) res)))
db
|
|
|
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
|
;;======================================================================
;; dneeded is minimum space needed, scan for existing archives that
;; are on disks with adequate space and already have this test/itempath
;; archived
;;
(define (db:archive-get-allocations dbstruct testname itempath dneeded)
(let* ((dbdat (db:get-db dbstruct)) ;; archive tables are in main.db
(db (db:dbdat-get-db dbdat))
(res '())
(blocks '())) ;; a block is an archive chunck that can be added too if there is space
(sqlite3:for-each-row
(lambda (id archive-disk-id disk-path last-du last-du-time)
(set! res (cons (vector id archive-disk-id disk-path last-du last-du-time) res)))
db
|
| ︙ | | | ︙ | |
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
|
dneeded))
blocks))
;; returns id of the record, register a disk allocated to archiving and record it's last known
;; available space
;;
(define (db:archive-register-disk dbstruct bdisk-name bdisk-path df)
(let* ((dbdat (db:get-db dbstruct #f)) ;; archive tables are in main.db
(db (db:dbdat-get-db dbdat))
(res #f))
(sqlite3:for-each-row
(lambda (id)
(set! res id))
db
"SELECT id FROM archive_disks WHERE archive_area_name=? AND disk_path=?;"
bdisk-name bdisk-path)
(if res ;; record exists, update df and return id
(begin
(sqlite3:execute db "UPDATE archive_disks SET last_df=?,last_df_time=(strftime('%s','now'))
WHERE archive_area_name=? AND disk_path=?;"
df bdisk-name bdisk-path)
res)
(begin
(sqlite3:execute
db
"INSERT OR REPLACE INTO archive_disks (archive_area_name,disk_path,last_df)
VALUES (?,?,?);"
bdisk-name bdisk-path df)
(db:archive-register-disk dbstruct bdisk-name bdisk-path df)))))
;; record an archive path created on a given archive disk (identified by it's bdisk-id)
;; if path starts with / then it is full, otherwise it is relative to the archive disk
;; preference is to store the relative path.
;;
(define (db:archive-register-block-name dbstruct bdisk-id archive-path #!key (du #f))
(let* ((dbdat (db:get-db dbstruct #f)) ;; archive tables are in main.db
(db (db:dbdat-get-db dbdat))
(res #f))
;; first look to see if this path is already registered
(sqlite3:for-each-row
(lambda (id)
(set! res id))
db
|
|
>
>
|
|
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
|
dneeded))
blocks))
;; returns id of the record, register a disk allocated to archiving and record it's last known
;; available space
;;
(define (db:archive-register-disk dbstruct bdisk-name bdisk-path df)
(let* ((dbdat (db:get-db dbstruct)) ;; archive tables are in main.db
(db (db:dbdat-get-db dbdat))
(res #f))
(sqlite3:for-each-row
(lambda (id)
(set! res id))
db
"SELECT id FROM archive_disks WHERE archive_area_name=? AND disk_path=?;"
bdisk-name bdisk-path)
(if res ;; record exists, update df and return id
(begin
(sqlite3:execute db "UPDATE archive_disks SET last_df=?,last_df_time=(strftime('%s','now'))
WHERE archive_area_name=? AND disk_path=?;"
df bdisk-name bdisk-path)
(stack-push! (dbr:dbstruct-dbstack dbstruct) dbdat)
res)
(begin
(sqlite3:execute
db
"INSERT OR REPLACE INTO archive_disks (archive_area_name,disk_path,last_df)
VALUES (?,?,?);"
bdisk-name bdisk-path df)
(stack-push! (dbr:dbstruct-dbstack dbstruct) dbdat)
(db:archive-register-disk dbstruct bdisk-name bdisk-path df)))))
;; record an archive path created on a given archive disk (identified by it's bdisk-id)
;; if path starts with / then it is full, otherwise it is relative to the archive disk
;; preference is to store the relative path.
;;
(define (db:archive-register-block-name dbstruct bdisk-id archive-path #!key (du #f))
(let* ((dbdat (db:get-db dbstruct)) ;; archive tables are in main.db
(db (db:dbdat-get-db dbdat))
(res #f))
;; first look to see if this path is already registered
(sqlite3:for-each-row
(lambda (id)
(set! res id))
db
|
| ︙ | | | ︙ | |
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
|
;;======================================================================
;;======================================================================
;; M A I N T E N A N C E
;;======================================================================
(define (db:have-incompletes? dbstruct run-id ovr-deadtime)
(let* ((dbdat (db:get-db dbstruct run-id))
(db (db:dbdat-get-db dbdat))
(incompleted '())
(if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
;;
;; HOWEVER: this code in run:test seems to work fine
;; (> (- (current-seconds)(+ (db:test-get-event_time testdat)
;; (db:test-get-run_duration testdat)))
;; 600)
;; (db:delay-if-busy dbdat)
(sqlite3:for-each-row
(lambda (test-id run-dir uname testname item-path)
(if (and (equal? uname "n/a")
(equal? item-path "")) ;; this is a toplevel test
;; what to do with toplevel? call rollup?
(begin
(set! toplevels (cons (list test-id run-dir uname testname item-path run-id) toplevels))
(debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
(set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))
db
"SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING','REMOTEHOSTSTART');"
run-id deadtime)
;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
;;
;; (db:delay-if-busy dbdat)
(sqlite3:for-each-row
(lambda (test-id run-dir uname testname item-path)
(if (and (equal? uname "n/a")
(equal? item-path "")) ;; this is a toplevel test
;; what to do with toplevel? call rollup?
(set! toplevels (cons (list test-id run-dir uname testname item-path run-id) toplevels))
(set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched))))
db
"SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400 AND state IN ('LAUNCHED');"
run-id)
(debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")
(if (and (null? incompleted)
(null? oldlaunched)
(null? toplevels))
#f
#t)))
;; given a launch delay (minimum time from last launch) return amount of time to wait
;;
;; (define (db:launch-delay-left dbstruct run-id launch-delay)
;; select end_time-now from
;; (select testname,item_path,event_time+run_duration as
;; end_time,strftime('%s','now') as now from tests where state in
;; ('RUNNING','REMOTEHOSTSTART','LAUNCED'));
(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
(let* ((dbdat (db:get-db dbstruct run-id))
(db (db:dbdat-get-db dbdat))
(incompleted '())
(if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
;;
;; HOWEVER: this code in run:test seems to work fine
;; (> (- (current-seconds)(+ (db:test-get-event_time testdat)
;; (db:test-get-run_duration testdat)))
;; 600)
;; (db:delay-if-busy dbdat)
(sqlite3:for-each-row
(lambda (test-id run-dir uname testname item-path)
(if (and (equal? uname "n/a")
(equal? item-path "")) ;; this is a toplevel test
;; what to do with toplevel? call rollup?
(begin
(set! toplevels (cons (list test-id run-dir uname testname item-path run-id) toplevels))
(debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
(set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))
db
"SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING','REMOTEHOSTSTART');"
run-id deadtime)
;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
;;
;; (db:delay-if-busy dbdat)
(sqlite3:for-each-row
(lambda (test-id run-dir uname testname item-path)
(if (and (equal? uname "n/a")
(equal? item-path "")) ;; this is a toplevel test
;; what to do with toplevel? call rollup?
(set! toplevels (cons (list test-id run-dir uname testname item-path run-id) toplevels))
(set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched))))
db
"SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400 AND state IN ('LAUNCHED');"
run-id)
(debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")
;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
;;
;; (db:delay-if-busy dbdat)
(let* (;; (min-incompleted (filter (lambda (x)
;; (let* ((testpath (cadr x))
;; (tdatpath (conc testpath "/testdat.db"))
;; (dbexists (file-exists? tdatpath)))
;; (or (not dbexists) ;; if no file then something wrong - mark as incomplete
;; (> (- (current-seconds)(file-modification-time tdatpath)) 600)))) ;; no change in 10 minutes to testdat.db - she's dead Jim
;; incompleted))
(min-incompleted-ids (map car incompleted)) ;; do 'em all
(all-ids (append min-incompleted-ids (map car oldlaunched))))
(if (> (length all-ids) 0)
(begin
(debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as INCOMPLETE")
(for-each
(lambda (test-id)
(db:test-set-state-status dbstruct run-id test-id "COMPLETE" "DEAD" "Test failed to complete"))
all-ids))))))
;; ALL REPLACED BY THE BLOCK ABOVE
;;
;; (sqlite3:execute
;; db
;; (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN ("
;; (string-intersperse (map conc all-ids) ",")
|
<
<
|
>
>
>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<
<
|
>
>
>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
|
;;======================================================================
;;======================================================================
;; M A I N T E N A N C E
;;======================================================================
(define (db:have-incompletes? dbstruct run-id ovr-deadtime)
(let* ((incompleted '())
(oldlaunched '())
(toplevels '())
(deadtime-str (configf:lookup *configdat* "setup" "deadtime"))
(deadtime (if (and deadtime-str
(string->number deadtime-str))
(string->number deadtime-str)
7200))) ;; two hours
(db:with-db
dbstruct #f #f
(lambda (db)
(if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
;;
;; HOWEVER: this code in run:test seems to work fine
;; (> (- (current-seconds)(+ (db:test-get-event_time testdat)
;; (db:test-get-run_duration testdat)))
;; 600)
;; (db:delay-if-busy dbdat)
(sqlite3:for-each-row
(lambda (test-id run-dir uname testname item-path)
(if (and (equal? uname "n/a")
(equal? item-path "")) ;; this is a toplevel test
;; what to do with toplevel? call rollup?
(begin
(set! toplevels (cons (list test-id run-dir uname testname item-path run-id) toplevels))
(debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
(set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))
db
"SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING','REMOTEHOSTSTART');"
run-id deadtime)
;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
;;
;; (db:delay-if-busy dbdat)
(sqlite3:for-each-row
(lambda (test-id run-dir uname testname item-path)
(if (and (equal? uname "n/a")
(equal? item-path "")) ;; this is a toplevel test
;; what to do with toplevel? call rollup?
(set! toplevels (cons (list test-id run-dir uname testname item-path run-id) toplevels))
(set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched))))
db
"SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400 AND state IN ('LAUNCHED');"
run-id)
(debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")
(if (and (null? incompleted)
(null? oldlaunched)
(null? toplevels))
#f
#t)))))
;; given a launch delay (minimum time from last launch) return amount of time to wait
;;
;; (define (db:launch-delay-left dbstruct run-id launch-delay)
;; select end_time-now from
;; (select testname,item_path,event_time+run_duration as
;; end_time,strftime('%s','now') as now from tests where state in
;; ('RUNNING','REMOTEHOSTSTART','LAUNCED'));
(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
(let* ((incompleted '())
(oldlaunched '())
(toplevels '())
(deadtime-str (configf:lookup *configdat* "setup" "deadtime"))
(deadtime (if (and deadtime-str
(string->number deadtime-str))
(string->number deadtime-str)
7200))) ;; two hours
(db:with-db
dbstruct #f #f
(lambda (db)
(if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
;;
;; HOWEVER: this code in run:test seems to work fine
;; (> (- (current-seconds)(+ (db:test-get-event_time testdat)
;; (db:test-get-run_duration testdat)))
;; 600)
;; (db:delay-if-busy dbdat)
(sqlite3:for-each-row
(lambda (test-id run-dir uname testname item-path)
(if (and (equal? uname "n/a")
(equal? item-path "")) ;; this is a toplevel test
;; what to do with toplevel? call rollup?
(begin
(set! toplevels (cons (list test-id run-dir uname testname item-path run-id) toplevels))
(debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
(set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))
db
"SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING','REMOTEHOSTSTART');"
run-id deadtime)
;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
;;
;; (db:delay-if-busy dbdat)
(sqlite3:for-each-row
(lambda (test-id run-dir uname testname item-path)
(if (and (equal? uname "n/a")
(equal? item-path "")) ;; this is a toplevel test
;; what to do with toplevel? call rollup?
(set! toplevels (cons (list test-id run-dir uname testname item-path run-id) toplevels))
(set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched))))
db
"SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400 AND state IN ('LAUNCHED');"
run-id)
(debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")
;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
;;
;; (db:delay-if-busy dbdat)
(let* (;; (min-incompleted (filter (lambda (x)
;; (let* ((testpath (cadr x))
;; (tdatpath (conc testpath "/testdat.db"))
;; (dbexists (file-exists? tdatpath)))
;; (or (not dbexists) ;; if no file then something wrong - mark as incomplete
;; (> (- (current-seconds)(file-modification-time tdatpath)) 600)))) ;; no change in 10 minutes to testdat.db - she's dead Jim
;; incompleted))
(min-incompleted-ids (map car incompleted)) ;; do 'em all
(all-ids (append min-incompleted-ids (map car oldlaunched))))
(if (> (length all-ids) 0)
(begin
(debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as INCOMPLETE")
(for-each
(lambda (test-id)
(db:test-set-state-status dbstruct run-id test-id "COMPLETE" "DEAD" "Test failed to complete"))
all-ids))))))))
;; ALL REPLACED BY THE BLOCK ABOVE
;;
;; (sqlite3:execute
;; db
;; (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN ("
;; (string-intersperse (map conc all-ids) ",")
|
| ︙ | | | ︙ | |
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
|
;; M E T A G E T A N D S E T V A R S
;;======================================================================
;; returns number if string->number is successful, string otherwise
;; also updates *global-delta*
;;
(define (db:get-var dbstruct var)
(let* ((res #f)
(dbdat (db:get-db dbstruct #f))
(db (db:dbdat-get-db dbdat)))
(sqlite3:for-each-row
(lambda (val)
(set! res val))
db
"SELECT val FROM metadat WHERE var=?;" var)
;; convert to number if can
(if (string? res)
(let ((valnum (string->number res)))
(if valnum (set! res valnum))))
res))
|
|
>
|
|
|
|
|
|
|
|
|
|
|
|
|
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
|
;; M E T A G E T A N D S E T V A R S
;;======================================================================
;; returns number if string->number is successful, string otherwise
;; also updates *global-delta*
;;
(define (db:get-var dbstruct var)
(let* ((res #f))
(db:with-db
dbstruct #f #f
(lambda (db)
(sqlite3:for-each-row
(lambda (val)
(set! res val))
db
"SELECT val FROM metadat WHERE var=?;" var)
;; convert to number if can
(if (string? res)
(let ((valnum (string->number res)))
(if valnum (set! res valnum))))
res))))
;; This was part of db:get-var. It was used to estimate the load on
;; the database files.
;;
;; scale by 10, average with current value.
;; (set! *global-delta* (/ (+ *global-delta* (* (- (current-milliseconds) start-ms)
;; (if throttle throttle 0.01)))
|
| ︙ | | | ︙ | |
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
|
comparator)))
;; register a test run with the db, this accesses the main.db and does NOT
;; use server api
;;
(define (db:register-run dbstruct keyvals runname state status user)
(let* ((dbdat (db:get-db dbstruct #f))
(db (db:dbdat-get-db dbdat))
(keys (map car keyvals))
;; (db:delay-if-busy dbdat)
;; (db:delay-if-busy dbdat)
;(debug:print 4 *default-log-port* "qry: " qry)
|
<
<
|
<
<
<
|
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
|
comparator)))
;; register a test run with the db, this accesses the main.db and does NOT
;; use server api
;;
(define (db:register-run dbstruct keyvals runname state status user)
(let* ((keys (map car keyvals))
(keystr (keys->keystr keys))
(comma (if (> (length keys) 0) "," ""))
(andstr (if (> (length keys) 0) " AND " ""))
(valslots (keys->valslots keys)) ;; ?,?,? ...
(allvals (append (list runname state status user) (map cadr keyvals)))
(qryvals (append (list runname) (map cadr keyvals)))
(key=?str (string-intersperse (map (lambda (k)(conc k "=?")) keys) " AND ")))
(debug:print 3 *default-log-port* "keys: " keys " allvals: " allvals " keyvals: " keyvals " key=?str is " key=?str)
(debug:print 2 *default-log-port* "NOTE: using target " (string-intersperse (map cadr keyvals) "/") " for this run")
(if (and runname (null? (filter (lambda (x)(not x)) keyvals))) ;; there must be a better way to "apply and"
(db:with-db
dbstruct #f #f
(lambda (db)
(let ((res #f))
(apply sqlite3:execute db (conc "INSERT OR IGNORE INTO runs (runname,state,status,owner,event_time" comma keystr ") VALUES (?,?,?,?,strftime('%s','now')" comma valslots ");")
allvals)
(apply sqlite3:for-each-row
(lambda (id)
(set! res id))
db
(let ((qry (conc "SELECT id FROM runs WHERE (runname=? " andstr key=?str ");")))
qry)
qryvals)
(sqlite3:execute db "UPDATE runs SET state=?,status=?,event_time=strftime('%s','now') WHERE id=? AND state='deleted';" state status res)
res)))
(begin
(debug:print-error 0 *default-log-port* "Called without all necessary keys")
#f))))
|
| ︙ | | | ︙ | |
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
|
(debug:print-info 11 *default-log-port* "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
(let ((finalres (vector header res)))
;; (hash-table-set! *run-info-cache* run-id finalres)
finalres)))
(define (db:set-comment-for-run dbstruct run-id comment)
(db:with-db
dbstruct
#f
#f
(lambda (db)
(sqlite3:execute db "UPDATE runs SET comment=? WHERE id=?;" comment ;; (sdb:qry 'getid comment)
run-id))))
;; does not (obviously!) removed dependent data. But why not!!?
(define (db:delete-run dbstruct run-id)
;; First set any related tests to DELETED
(let* ((rdbdat (db:get-db dbstruct run-id))
(rdb (db:dbdat-get-db rdbdat))
(dbdat (db:get-db dbstruct #f))
(db (db:dbdat-get-db dbdat)))
;; (db:delay-if-busy rdbdat)
(sqlite3:with-transaction
db
(lambda ()
(sqlite3:execute rdb "DELETE FROM test_steps WHERE test_id IN (SELECT id FROM tests WHERE run_id=?);" run-id)
(sqlite3:execute rdb "DELETE FROM test_data WHERE test_id IN (SELECT id FROM tests WHERE run_id=?);" run-id)
(sqlite3:execute rdb "UPDATE tests SET state='DELETED',comment='' WHERE run_id=?;" run-id)
;; (db:delay-if-busy dbdat)
(sqlite3:execute db "UPDATE runs SET state='deleted',comment='' WHERE id=?;" run-id)))))
dbstruct
#f
#t
(lambda (db)
(sqlite3:execute db "UPDATE runs SET event_time=strftime('%s','now') WHERE id=?;" run-id))))
(define (db:lock/unlock-run dbstruct run-id lock unlock user)
(db:with-db
dbstruct
#f
#t
(lambda (db)
(let ((newlockval (if lock "locked"
(if unlock
"unlocked"
"locked")))) ;; semi-failsafe
(sqlite3:execute db "UPDATE runs SET state=? WHERE id=?;" newlockval run-id)
(sqlite3:execute db "INSERT INTO access_log (user,accessed,args) VALUES(?,strftime('%s','now'),?);"
user (conc newlockval " " run-id))
(debug:print-info 1 *default-log-port* "" newlockval " run number " run-id)))))
(define (db:set-run-status dbstruct run-id status msg)
(let* ((dbdat (db:get-db dbstruct #f))
(db (db:dbdat-get-db dbdat)))
;; (db:delay-if-busy dbdat)
(if msg
(sqlite3:execute db "UPDATE runs SET status=?,comment=? WHERE id=?;" status msg run-id)
(sqlite3:execute db "UPDATE runs SET status=? WHERE id=?;" status run-id))))
(define (db:get-run-status dbstruct run-id)
(let ((res "n/a"))
(db:with-db
dbstruct
#f
#f
(lambda (db)
(sqlite3:for-each-row
(lambda (status)
(set! res status))
db
"SELECT status FROM runs WHERE id=?;"
run-id)
|
|
<
<
<
<
|
|
<
|
|
|
|
|
|
|
|
|
|
<
<
|
<
<
>
|
<
|
|
|
|
|
<
<
|
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
|
(debug:print-info 11 *default-log-port* "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
(let ((finalres (vector header res)))
;; (hash-table-set! *run-info-cache* run-id finalres)
finalres)))
(define (db:set-comment-for-run dbstruct run-id comment)
(db:with-db
dbstruct #f #f
(lambda (db)
(sqlite3:execute db "UPDATE runs SET comment=? WHERE id=?;" comment ;; (sdb:qry 'getid comment)
run-id))))
;; does not (obviously!) removed dependent data. But why not!!?
(define (db:delete-run dbstruct run-id)
(db:with-db
dbstruct #f #f
(lambda (db)
(sqlite3:with-transaction
db
(lambda ()
(sqlite3:execute db "DELETE FROM test_steps WHERE test_id IN (SELECT id FROM tests WHERE run_id=?);" run-id)
(sqlite3:execute db "DELETE FROM test_data WHERE test_id IN (SELECT id FROM tests WHERE run_id=?);" run-id)
(sqlite3:execute db "UPDATE tests SET state='DELETED',comment='' WHERE run_id=?;" run-id)
;; (db:delay-if-busy dbdat)
(sqlite3:execute db "UPDATE runs SET state='deleted',comment='' WHERE id=?;" run-id))))))
(define (db:update-run-event_time dbstruct run-id)
(db:with-db
dbstruct #f #t
(lambda (db)
(sqlite3:execute db "UPDATE runs SET event_time=strftime('%s','now') WHERE id=?;" run-id))))
(define (db:lock/unlock-run dbstruct run-id lock unlock user)
(db:with-db
dbstruct #f #t
(lambda (db)
(let ((newlockval (if lock "locked"
(if unlock
"unlocked"
"locked")))) ;; semi-failsafe
(sqlite3:execute db "UPDATE runs SET state=? WHERE id=?;" newlockval run-id)
(sqlite3:execute db "INSERT INTO access_log (user,accessed,args) VALUES(?,strftime('%s','now'),?);"
user (conc newlockval " " run-id))
(debug:print-info 1 *default-log-port* "" newlockval " run number " run-id)))))
(define (db:set-run-status dbstruct run-id status msg)
(db:with-db
dbstruct #f #f
(lambda (db)
(if msg
(sqlite3:execute db "UPDATE runs SET status=?,comment=? WHERE id=?;" status msg run-id)
(sqlite3:execute db "UPDATE runs SET status=? WHERE id=?;" status run-id)))))
(define (db:get-run-status dbstruct run-id)
(let ((res "n/a"))
(db:with-db
dbstruct #f #f
(lambda (db)
(sqlite3:for-each-row
(lambda (status)
(set! res status))
db
"SELECT status FROM runs WHERE id=?;"
run-id)
|
| ︙ | | | ︙ | |
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
|
;; WARNING: Do NOT call this for the parent test on an iterated test
;; Roll up test_data pass/fail results
;; look at the test_data status field,
;; if all are pass (any case) and the test status is PASS or NULL or '' then set test status to PASS.
;; if one or more are fail (any case) then set test status to PASS, non "pass" or "fail" are ignored
(define (db:test-data-rollup dbstruct run-id test-id status)
(let* ((dbdat (db:get-db dbstruct run-id))
(db (db:dbdat-get-db dbdat))
(fail-count 0)
|
<
<
|
|
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
|
;; WARNING: Do NOT call this for the parent test on an iterated test
;; Roll up test_data pass/fail results
;; look at the test_data status field,
;; if all are pass (any case) and the test status is PASS or NULL or '' then set test status to PASS.
;; if one or more are fail (any case) then set test status to PASS, non "pass" or "fail" are ignored
(define (db:test-data-rollup dbstruct run-id test-id status)
(let* ((fail-count 0)
(pass-count 0))
(db:with-db
dbstruct #f #f
(lambda (db)
(sqlite3:for-each-row
(lambda (fcount pcount)
(set! fail-count fcount)
|
| ︙ | | | ︙ | |
3198
3199
3200
3201
3202
3203
3204
3205
3206
3207
3208
3209
3210
3211
3212
3213
3214
3215
3216
3217
3218
3219
3220
3221
3222
3223
3224
3225
3226
3227
3228
3229
3230
3231
3232
3233
3234
3235
3236
3237
3238
3239
3240
3241
3242
3243
3244
3245
3246
3247
3248
3249
3250
3251
3252
3253
3254
|
(db:get-test-info dbstruct run-id test-name item-path)))
(test-id (db:test-get-id testdat))
(test-name (if (number? test-name)
(db:test-get-testname testdat)
test-name))
(item-path (db:test-get-item-path testdat))
(tl-testdat (db:get-test-info dbstruct run-id test-name ""))
(tl-test-id (db:test-get-id tl-testdat))
(db (db:dbdat-get-db (db:get-db dbstruct #f))))
(if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
(db:general-call dbstruct 'set-test-start-time (list test-id)))
(mutex-lock! *db-transaction-mutex*)
(let ((tr-res
(sqlite3:with-transaction
db
(lambda ()
;; (db:test-set-state-status-by-id dbstruct run-id test-id state status comment)
(db:test-set-state-status dbstruct run-id test-id state status comment)
(if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
(let* ((state-status-counts (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path)) ;; item-path is used to exclude current state/status of THIS test
(running (length (filter (lambda (x)
(member (dbr:counts-state x) *common:running-states*))
state-status-counts)))
(bad-not-started (length (filter (lambda (x)
(and (equal? (dbr:counts-state x) "NOT_STARTED")
(not (member (dbr:counts-status x)
*common:not-started-ok-statuses*))))
state-status-counts)))
(all-curr-states (common:special-sort ;; worst -> best (sort of)
(delete-duplicates
(cons state (map dbr:counts-state state-status-counts)))
*common:std-states* >))
(all-curr-statuses (common:special-sort ;; worst -> best
(delete-duplicates
(cons status (map dbr:counts-status state-status-counts)))
*common:std-statuses* >))
(newstate (if (> running 0)
"RUNNING"
(if (> bad-not-started 0)
"COMPLETED"
(car all-curr-states))))
(newstatus (if (> bad-not-started 0)
"CHECK"
(car all-curr-statuses))))
;; (print "Setting toplevel to: " newstate "/" newstatus)
(db:test-set-state-status dbstruct run-id tl-test-id newstate newstatus #f)))))))
(mutex-unlock! *db-transaction-mutex*)
(if (and test-id state status (equal? status "AUTO"))
(db:test-data-rollup dbstruct run-id test-id status))
tr-res)))
|
|
<
|
>
>
>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3180
3181
3182
3183
3184
3185
3186
3187
3188
3189
3190
3191
3192
3193
3194
3195
3196
3197
3198
3199
3200
3201
3202
3203
3204
3205
3206
3207
3208
3209
3210
3211
3212
3213
3214
3215
3216
3217
3218
3219
3220
3221
3222
3223
3224
3225
3226
3227
3228
3229
3230
3231
3232
3233
3234
3235
3236
3237
3238
|
(db:get-test-info dbstruct run-id test-name item-path)))
(test-id (db:test-get-id testdat))
(test-name (if (number? test-name)
(db:test-get-testname testdat)
test-name))
(item-path (db:test-get-item-path testdat))
(tl-testdat (db:get-test-info dbstruct run-id test-name ""))
(tl-test-id (db:test-get-id tl-testdat)))
(if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
(db:general-call dbstruct 'set-test-start-time (list test-id)))
;; (mutex-lock! *db-transaction-mutex*)
(db:with-db
dbstruct #f #f
(lambda (db)
(let ((tr-res
(sqlite3:with-transaction
db
(lambda ()
;; (db:test-set-state-status-by-id dbstruct run-id test-id state status comment)
(db:test-set-state-status dbstruct run-id test-id state status comment)
(if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
(let* ((state-status-counts (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path)) ;; item-path is used to exclude current state/status of THIS test
(running (length (filter (lambda (x)
(member (dbr:counts-state x) *common:running-states*))
state-status-counts)))
(bad-not-started (length (filter (lambda (x)
(and (equal? (dbr:counts-state x) "NOT_STARTED")
(not (member (dbr:counts-status x)
*common:not-started-ok-statuses*))))
state-status-counts)))
(all-curr-states (common:special-sort ;; worst -> best (sort of)
(delete-duplicates
(cons state (map dbr:counts-state state-status-counts)))
*common:std-states* >))
(all-curr-statuses (common:special-sort ;; worst -> best
(delete-duplicates
(cons status (map dbr:counts-status state-status-counts)))
*common:std-statuses* >))
(newstate (if (> running 0)
"RUNNING"
(if (> bad-not-started 0)
"COMPLETED"
(car all-curr-states))))
(newstatus (if (> bad-not-started 0)
"CHECK"
(car all-curr-statuses))))
;; (print "Setting toplevel to: " newstate "/" newstatus)
(db:test-set-state-status dbstruct run-id tl-test-id newstate newstatus #f)))))))
;; (mutex-unlock! *db-transaction-mutex*)
(if (and test-id state status (equal? status "AUTO"))
(db:test-data-rollup dbstruct run-id test-id status))
tr-res)))))
(define (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path)
(db:with-db
dbstruct #f #f
(lambda (db)
(sqlite3:map-row
(lambda (state status count)
|
| ︙ | | | ︙ | |
3482
3483
3484
3485
3486
3487
3488
3489
3490
3491
3492
3493
3494
3495
3496
3497
3498
3499
3500
3501
3502
3503
3504
3505
3506
3507
3508
3509
3510
3511
3512
|
(lambda (state status count)
(set! res (cons (vector state status count) res)))
db
"SELECT state,status,count(state) FROM tests WHERE run_id=? AND testname=? AND item_path='' GROUP BY state,status;"
run-id testname)
res)))
(res (cons -1 0))
(mydb (db:dbdat-get-db (db:get-db dbstruct 0)))
)
(db:with-db
dbstruct
0
#f
(lambda (db)
(sqlite3:for-each-row
(lambda (cpuload update-time) (set! res (cons cpuload update-time)))
db
"SELECT tr.cpuload, tr.update_time FROM test_rundat tr, tests t WHERE t.host=? AND tr.cpuload != -1 AND tr.test_id=t.id ORDER BY tr.update_time DESC LIMIT 1;"
hostname))) res ))
|
<
|
<
<
|
<
<
<
|
3466
3467
3468
3469
3470
3471
3472
3473
3474
3475
3476
3477
3478
3479
3480
3481
3482
3483
3484
3485
3486
3487
3488
3489
3490
|
(lambda (state status count)
(set! res (cons (vector state status count) res)))
db
"SELECT state,status,count(state) FROM tests WHERE run_id=? AND testname=? AND item_path='' GROUP BY state,status;"
run-id testname)
res)))
(define (db:get-latest-host-load dbstruct raw-hostname)
(let* ((hostname (string-substitute "\\..*$" "" raw-hostname))
(res (cons -1 0)))
(db:with-db
dbstruct #f #f
(lambda (db)
(sqlite3:for-each-row
(lambda (cpuload update-time) (set! res (cons cpuload update-time)))
db
"SELECT tr.cpuload, tr.update_time FROM test_rundat tr, tests t WHERE t.host=? AND tr.cpuload != -1 AND tr.test_id=t.id ORDER BY tr.update_time DESC LIMIT 1;"
hostname))) res ))
(define (db:set-top-level-from-items dbstruct run-id testname)
(let* ((summ (db:get-state-status-summary dbstruct run-id testname))
(find (lambda (state status)
(if (null? summ)
#f
(let loop ((hed (car summ))
|
| ︙ | | | ︙ | |
3847
3848
3849
3850
3851
3852
3853
3854
3855
3856
3857
3858
3859
3860
3861
|
;; runspatt is a comma delimited list of run patterns
;; keypatt-alist must contain *all* keys with an associated pattern: '( ("KEY1" "%") .. )
(define (db:extract-ods-file dbstruct outputfile keypatt-alist runspatt pathmod)
(let* ((keysstr (string-intersperse (map car keypatt-alist) ","))
(keyqry (string-intersperse (map (lambda (p)(conc (car p) " LIKE ? ")) keypatt-alist) " AND "))
(numkeys (length keypatt-alist))
(test-ids '())
(dbdat (db:get-db dbstruct #f))
(db (db:dbdat-get-db dbdat))
(windows (and pathmod (substring-index "\\" pathmod)))
(tempdir (conc "/tmp/" (current-user-name) "/" runspatt "_" (random 10000) "_" (current-process-id)))
(runsheader (append (list "Run Id" "Runname") ; 0 1
(map car keypatt-alist) ; + N = length keypatt-alist
(list "Testname" ; 2
"Item Path" ; 3
|
|
|
3825
3826
3827
3828
3829
3830
3831
3832
3833
3834
3835
3836
3837
3838
3839
|
;; runspatt is a comma delimited list of run patterns
;; keypatt-alist must contain *all* keys with an associated pattern: '( ("KEY1" "%") .. )
(define (db:extract-ods-file dbstruct outputfile keypatt-alist runspatt pathmod)
(let* ((keysstr (string-intersperse (map car keypatt-alist) ","))
(keyqry (string-intersperse (map (lambda (p)(conc (car p) " LIKE ? ")) keypatt-alist) " AND "))
(numkeys (length keypatt-alist))
(test-ids '())
(dbdat (db:get-db dbstruct))
(db (db:dbdat-get-db dbdat))
(windows (and pathmod (substring-index "\\" pathmod)))
(tempdir (conc "/tmp/" (current-user-name) "/" runspatt "_" (random 10000) "_" (current-process-id)))
(runsheader (append (list "Run Id" "Runname") ; 0 1
(map car keypatt-alist) ; + N = length keypatt-alist
(list "Testname" ; 2
"Item Path" ; 3
|
| ︙ | | | ︙ | |