Megatest

(declare (uses db))

(define *db* #f) ;; this is only for the repl, do not use in general!!!!

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")
(include "megatest-fossil-hash.scm")

(let ((debugcontrolf (conc (get-environment-variable "HOME") "/.megatestrc")))
  (if (file-exists? debugcontrolf)
      (load debugcontrolf)))

                            Optionally use :state and :status
  -set-state-status X,Y   : set state to X and status to Y, requires controls per -remove-runs
  -rerun FAIL,WARN...     : force re-run for tests with specificed status(s)
  -rollup                 : (currently disabled) fill run (set by :runname)  with latest test(s)
                            from prior runs with same keys
  -lock                   : lock run specified by target and runname
  -unlock                 : unlock run specified by target and runname
  -run-wait               : wait on run specified by target and runname

Selectors (e.g. use for -runtests, -remove-runs, -set-state-status, -list-runs etc.)
  -target key1/key2/...   : run for key1, key2, etc.
  -reqtarg key1/key2/...  : run for key1, key2, etc. but key1/key2 must be in runconfig
  -testpatt patt1/patt2,patt3/...  : % is wildcard
  :runname                : required, name for this particular test run
  :state                  : Applies to runs, tests or steps depending on context

  :units                  : name of the units for value, expected_value etc. (optional)
  -load-test-data         : read test specific data for storage in the test_data table
                            from standard in. Each line is comma delimited with four
                            fields category,variable,value,comment

Queries
  -list-runs patt         : list runs matching pattern \"patt\", % is the wildcard
  -show-keys              : show the keys used in this megatest setup
  -test-files targpatt    : get the most recent test path/file matching targpatt e.g. %/%... 
                            returns list sorted by age ascending, see examples below
  -test-paths             : get the test paths matching target, runname, item and test
                            patterns.
  -list-disks             : list the disks available for storing runs
  -list-targets           : list the targets in runconfigs.config
  -list-db-targets        : list the target combinations used in the db
  -show-config            : dump the internal representation of the megatest.config file

  -setvars VAR1=val1,VAR2=val2 : Add environment variables to a run NB// these are
                                 overwritten by values set in config files.
  -server -|hostname      : start the server (reduces contention on megatest.db), use
                            - to automatically figure out hostname
  -transport http|fs      : use http or direct access for transport (default is http) 
  -daemonize              : fork into background and disconnect from stdin/out
  -list-servers           : list the servers 
  -stop-server id         : stop server specified by id (see output of -list-servers), use
                            0 to kill all
  -repl                   : start a repl (useful for extending megatest)
  -load file.scm          : load and run file.scm

Spreadsheet generation
  -extract-ods fname.ods  : extract an open document spreadsheet from the database
  -pathmod path           : insert path, i.e. path/runame/itempath/logfile.html
                            will clear the field if no rundir/testname/itempath/logfile

			"-dumpmode"
			) 
		 (list  "-h"
			"-version"
		        "-force"
		        "-xterm"
		        "-showkeys"
		        "-show-keys"
		        "-test-status"
			"-set-values"
			"-load-test-data"
			"-summarize-items"
		        "-gui"
			"-daemonize"
			;; misc
			"-archive"
			"-repl"
			"-lock"
			"-unlock"
			"-list-servers"
                        "-run-wait"      ;; wait on a run to complete (i.e. no RUNNING)

			;; misc queries
			"-list-disks"
			"-list-targets"
			"-list-db-targets"
			"-show-runconfig"
			"-show-config"
			"-show-cmdinfo"
			;; queries

		  )))))

(if (or (args:get-arg "-list-servers")
	(args:get-arg "-stop-server"))
    (let ((tl (setup-for-run)))
      (if tl 
	  (let* ((servers (open-run-close tasks:get-all-servers tasks:open-db))
		 (fmtstr  "~5a~12a~8a~20a~24a~10a~10a~10a~10a\n")
		 (servers-to-kill '())
		 (killinfo   (args:get-arg "-stop-server"))
		 (khost-port (if killinfo (if (substring-index ":" killinfo)(string-split ":") #f) #f))
		 (sid        (if killinfo (if (substring-index ":" killinfo) #f (string->number killinfo)) #f)))
	    (format #t fmtstr "Id" "MTver" "Pid" "Host" "Interface:OutPort" "InPort" "LastBeat" "State" "Transport")
	    (format #t fmtstr "==" "=====" "===" "====" "=================" "======" "========" "=====" "=========")
	    (for-each 
	     (lambda (server)
	       (let* ((id         (vector-ref server 0))
		      (pid        (vector-ref server 1))
		      (hostname   (vector-ref server 2))
		      (interface  (vector-ref server 3)) 
		      (pullport   (vector-ref server 4))
		      (pubport    (vector-ref server 5))
		      (start-time (vector-ref server 6))
		      (priority   (vector-ref server 7))
		      (state      (vector-ref server 8))
		      (mt-ver     (vector-ref server 9))
		      (last-update (vector-ref server 10)) ;;   (open-run-close tasks:server-alive? tasks:open-db #f hostname: hostname port: port))
		      (transport  (vector-ref server 11))
		      (killed     #f)
		      (status     (< last-update 20)))
		 ;;   (zmq-sockets (if status (server:client-connect hostname port) #f)))
		 ;; no need to login as status of #t indicates we are connecting to correct 
		 ;; server
		 (if (equal? state "dead")
		     (if (> last-update (* 25 60 60)) ;; keep records around for slighly over a day.
			 (open-run-close tasks:server-deregister tasks:open-db hostname pullport: pullport pid: pid action: 'delete))
		     (if (> last-update 20)        ;; Mark as dead if not updated in last 20 seconds
			 (open-run-close tasks:server-deregister tasks:open-db hostname pullport: pullport pid: pid)))
		 (format #t fmtstr id mt-ver pid hostname (conc interface ":" pullport) pubport last-update
			 (if status "alive" "dead") transport)
		 (if (or (equal? id sid)
			 (equal? sid 0)) ;; kill all/any
		     (begin
		       (debug:print-info 0 "Attempting to stop server with pid " pid)
		       (tasks:kill-server status hostname pullport pid transport)))))
	     servers)
	    (debug:print-info 1 "Done with listservers")
	    (set! *didsomething* #t)
	    (exit)) ;; must do, would have to add checks to many/all calls below

      (for-each (lambda (x)
		  ;; (print "[" x "]"))
		  (print x))
		targets)
      (set! *didsomething* #t)))

(define (full-runconfigs-read)
  (let* ((keys   (cdb:remote-run db:get-keys #f))
	 (target (if (args:get-arg "-reqtarg")
		     (args:get-arg "-reqtarg")
		     (if (args:get-arg "-target")
			 (args:get-arg "-target")
			 #f)))
	 (key-vals (if target (keys:target->keyval keys target) #f))
	 (sections (if target (list "default" target) #f))

;;======================================================================
;; Remove old run(s)
;;======================================================================

;; since several actions can be specified on the command line the removal
;; is done first
(define (operate-on action)
  (let* ((runrec (runs:runrec-make-record))
	 (target (or (args:get-arg "-reqtarg")
		     (args:get-arg "-target"))))
    (cond
     ((not target)
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify -target or -reqtarg")
      (exit 1))
     ((not (args:get-arg ":runname"))
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify the run name pattern with :runname patt")
      (exit 2))
     ((not (args:get-arg "-testpatt"))
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify the test pattern with -testpatt")
      (exit 3))
     (else
      (if (not (car *configinfo*))
	  (begin
	    (debug:print 0 "ERROR: Attempted " action "on test(s) but run area config file not found")
	    (exit 1))
	  ;; put test parameters into convenient variables
	  (runs:operate-on  action
			    target
			    (args:get-arg ":runname")
			    (args:get-arg "-testpatt")
			    state: (args:get-arg ":state") 
			    status: (args:get-arg ":status")
			    new-state-status: (args:get-arg "-set-state-status")))
      (set! *didsomething* #t)))))
	  
(if (args:get-arg "-remove-runs")
    (general-run-call 
     "-remove-runs"
     "remove runs"
     (lambda (target runname keys keyvals)
       (operate-on 'remove-runs))))

(if (args:get-arg "-set-state-status")
    (general-run-call 
     "-set-state-status"
     "set state and status"
     (lambda (target runname keys keyvals)
       (operate-on 'set-state-status))))

;;======================================================================
;; Query runs
;;======================================================================

(if (or (args:get-arg "-list-runs")
	(args:get-arg "-list-db-targets"))
    (if (setup-for-run)
	(let* ((db       #f)
	       (runpatt  (args:get-arg "-list-runs"))
	       (testpatt (if (args:get-arg "-testpatt") 
			     (args:get-arg "-testpatt") 
			     "%"))
	       (runsdat  (cdb:remote-run db:get-runs #f runpatt #f #f '()))
	       (runs     (db:get-rows runsdat))
	       (header   (db:get-header runsdat))
	       (keys     (cdb:remote-run db:get-keys #f))

	       (db-targets (args:get-arg "-list-db-targets"))
	       (seen     (make-hash-table)))
	  ;; Each run
	  (for-each 
	   (lambda (run)
	     (let ((targetstr (string-intersperse (map (lambda (x)
							 (db:get-value-by-header run header x))
						       keys) "/")))
	       (if db-targets
		   (if (not (hash-table-ref/default seen targetstr #f))
		       (begin
			 (hash-table-set! seen targetstr #t)
			 ;; (print "[" targetstr "]"))))
			 (print targetstr))))
	       (if (not db-targets)
		   (let* ((run-id (db:get-value-by-header run header "id"))
			  (tests  (mt:get-tests-for-run run-id testpatt '() '())))
		     (print "Run: " targetstr "/" (db:get-value-by-header run header "runname") 
			    " status: " (db:get-value-by-header run header "state")
			    " run-id: " run-id ", number tests: " (length tests))
		     (for-each 
		      (lambda (test)
			(format #t
				"  Test: ~25a State: ~15a Status: ~15a Runtime: ~5@as Time: ~22a Host: ~10a\n"

;;   process deferred tasks per above steps

;; run all tests are are Not COMPLETED and PASS or CHECK
(if (args:get-arg "-runall")
    (general-run-call 
     "-runall"
     "run all tests"
     (lambda (target runname keys keyvals)
       (runs:run-tests target
		       runname

		       (args:get-arg "-testpatt")
		       user
		       args:arg-hash))))

;;======================================================================
;; run one test
;;======================================================================

;;    - if test run time > allowed run time then kill job
;;    - if cannot access db > allowed disconnect time then kill job

(if (args:get-arg "-runtests")
  (general-run-call 
   "-runtests" 
   "run a test" 
   (lambda (target runname keys keyvals)
     (runs:run-tests target
		     runname

		     (args:get-arg "-runtests")
		     user
		     args:arg-hash))))

;;======================================================================
;; Rollup into a run
;;======================================================================

(if (args:get-arg "-rollup")



    (general-run-call 
     "-rollup" 
     "rollup tests" 
     (lambda (target runname keys keyvals)
       (runs:rollup-run keys
			keyvals
			(args:get-arg ":runname") 
			user))))

;;======================================================================
;; Lock or unlock a run
;;======================================================================

(if (or (args:get-arg "-lock")(args:get-arg "-unlock"))
    (general-run-call 
     (if (args:get-arg "-lock") "-lock" "-unlock")
     "lock/unlock tests" 
     (lambda (target runname keys keyvals)
       (runs:handle-locking 
		  target
		  keys
		  (args:get-arg ":runname") 
		  (args:get-arg "-lock")
		  (args:get-arg "-unlock")
		  user))))

		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -test-paths or -test-files, exiting")
		(exit 1)))
	  (let* ((keys     (cdb:remote-run db:get-keys db))

		 ;; db:test-get-paths must not be run remote
		 (paths    (db:test-get-paths-matching db keys target (args:get-arg "-test-files"))))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(print path))
		      paths)))
	;; else do a general-run-call
	(general-run-call 
	 "-test-files"
	 "Get paths to test"
	 (lambda (target runname keys keyvals)
	   (let* ((db       #f)
		  ;; DO NOT run remote
		  (paths    (db:test-get-paths-matching db keys target (args:get-arg "-test-files"))))
	     (for-each (lambda (path)
			 (print path))
		       paths))))))

;;======================================================================
;; Archive tests
;;======================================================================

		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -archive, exiting")
		(exit 1)))
	  (let* ((keys     (cdb:remote-run db:get-keys db))

		 ;; DO NOT run remote
		 (paths    (db:test-get-paths-matching db keys target)))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(print path))
		      paths)))
	;; else do a general-run-call
	(general-run-call 
	 "-test-paths"
	 "Get paths to tests"
	 (lambda (target runname keys keyvals)
	   (let* ((db       #f)
		  ;; DO NOT run remote
		  (paths    (db:test-get-paths-matching db keys target)))
	     (for-each (lambda (path)
			 (print path))
		       paths))))))

;;======================================================================
;; Extract a spreadsheet from the runs database
;;======================================================================

(if (args:get-arg "-extract-ods")
    (general-run-call
     "-extract-ods"
     "Make ods spreadsheet"
     (lambda (target runname keys keyvals)
       (let ((db         #f)
	     (outputfile (args:get-arg "-extract-ods"))
	     (runspatt   (args:get-arg ":runname"))
	     (pathmod    (args:get-arg "-pathmod")))
	     ;; (keyvalalist (keys->alist keys "%")))
	 (debug:print 2 "Extract ods, outputfile: " outputfile " runspatt: " runspatt " keyvalalist: " keyvals)
	 (cdb:remote-run db:extract-ods-file db outputfile keyvalalist (if runspatt runspatt "%") pathmod)))))

;;======================================================================
;; execute the test
;;    - gets called on remote host
;;    - receives info from the -execute param
;;    - passes info to steps via MT_CMDINFO env var (future is to use a dot file)

	  (if db (sqlite3:finalize! db))
	  (set! *didsomething* #t))))

;;======================================================================
;; Various helper commands can go below here
;;======================================================================

(if (or (args:get-arg "-showkeys")
        (args:get-arg "-show-keys"))
    (let ((db #f)
	  (keys #f))
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "Failed to setup, exiting")
	    (exit 1)))
      (set! keys (cdb:remote-run db:get-keys db))
      (debug:print 1 "Keys: " (string-intersperse keys ", "))
      (if db (sqlite3:finalize! db))
      (set! *didsomething* #t)))

(if (args:get-arg "-gui")
    (begin
      (debug:print 0 "Look at the dashboard for now")
      ;; (megatest-gui)

      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; keep this one local
      (open-run-close patch-db #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Wait on a run to complete
;;======================================================================

(if (args:get-arg "-run-wait")
    (begin
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      (operate-on 'run-wait)
      (set! *didsomething* #t)))

;;======================================================================
;; Update the tests meta data from the testconfig files
;;======================================================================

(if (args:get-arg "-update-meta")
    (begin