29
30
31
32
33
34
35
36
37
38
39
40
41
42
|
;; (declare (uses sdb))
;; (declare (uses filedb))
(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")
(define (ezsteps:run-from testdat start-step-name run-one)
(let* ((test-run-dir ;; (filedb:get-path *fdb*
(db:test-get-rundir testdat)) ;; )
(testconfig (read-config (conc test-run-dir "/testconfig") #f #t environ-patt: "pre-launch-env-vars"))
(ezstepslst (hash-table-ref/default testconfig "ezsteps" '()))
(run-mutex (make-mutex))
|
>
>
>
>
>
|
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
|
;; (declare (uses sdb))
;; (declare (uses filedb))
(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")
;;(rmt:get-test-info-by-id run-id test-id) -> testdat
(define (ezsteps:run-from testdat start-step-name run-one)
(let* ((test-run-dir ;; (filedb:get-path *fdb*
(db:test-get-rundir testdat)) ;; )
(testconfig (read-config (conc test-run-dir "/testconfig") #f #t environ-patt: "pre-launch-env-vars"))
(ezstepslst (hash-table-ref/default testconfig "ezsteps" '()))
(run-mutex (make-mutex))
|
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
|
(begin
(debug:print 0 *default-log-port* "WARNING: ezsteps attempting to run but test run directory " test-run-dir " is not there. Waiting and trying again " count " more times")
(sleep 3)
(loop (- count 1))))))
(debug:print-info 0 *default-log-port* "Running in directory " test-run-dir)
(if (not (common:file-exists? ".ezsteps"))(create-directory ".ezsteps"))
;; if ezsteps was defined then we are sure to have at least one step but check anyway
(if (not (> (length ezstepslst) 0))
(message-window "ERROR: You can only re-run steps defined via ezsteps")
(begin
(let loop ((ezstep (car ezstepslst))
(tal (cdr ezstepslst))
(prevstep #f)
(runflag #f)) ;; flag used to skip steps when not starting at the beginning
(if (vector-ref exit-info 1)
|
>
|
|
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
|
(begin
(debug:print 0 *default-log-port* "WARNING: ezsteps attempting to run but test run directory " test-run-dir " is not there. Waiting and trying again " count " more times")
(sleep 3)
(loop (- count 1))))))
(debug:print-info 0 *default-log-port* "Running in directory " test-run-dir)
(if (not (common:file-exists? ".ezsteps"))(create-directory ".ezsteps"))
;; if ezsteps was defined then we are sure to have at least one step but check anyway
(if (not (> (length ezstepslst) 0))
(message-window "ERROR: You can only re-run steps defined via ezsteps")
(begin
(let loop ((ezstep (car ezstepslst))
(tal (cdr ezstepslst))
(prevstep #f)
(runflag #f)) ;; flag used to skip steps when not starting at the beginning
(if (vector-ref exit-info 1)
|
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
|
(thread-sleep! 1)
(processloop (+ i 1))))
))
(let ((exinfo (vector-ref exit-info 2))
(logfna (if logpro-used (conc stepname ".html") "")))
(rmt:teststep-set-status! run-id test-id stepname "end" exinfo #f logfna))
(if logpro-used
(rmt:test-set-log! test-id (conc stepname ".html")))
;; set the test final status
(let* ((this-step-status (cond
((and (eq? (vector-ref exit-info 2) 2) logpro-used) 'warn)
((eq? (vector-ref exit-info 2) 0) 'pass)
(else 'fail)))
(overall-status (cond
((eq? rollup-status 2) 'warn)
|
|
|
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
|
(thread-sleep! 1)
(processloop (+ i 1))))
))
(let ((exinfo (vector-ref exit-info 2))
(logfna (if logpro-used (conc stepname ".html") "")))
(rmt:teststep-set-status! run-id test-id stepname "end" exinfo #f logfna))
(if logpro-used
(rmt:test-set-log! run-id test-id (conc stepname ".html")))
;; set the test final status
(let* ((this-step-status (cond
((and (eq? (vector-ref exit-info 2) 2) logpro-used) 'warn)
((eq? (vector-ref exit-info 2) 0) 'pass)
(else 'fail)))
(overall-status (cond
((eq? rollup-status 2) 'warn)
|
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
|
(debug:print 4 *default-log-port* "Exit value received: " (vector-ref exit-info 2) " logpro-used: " logpro-used
" this-step-status: " this-step-status " overall-status: " overall-status
" next-status: " next-status " rollup-status: " rollup-status)
(case next-status
((warn)
(set! rollup-status 2)
;; NB// test-set-status! does rdb calls under the hood
(tests:test-set-status! test-id "RUNNING" "WARN"
(if (eq? this-step-status 'warn) "Logpro warning found" #f)
#f))
((pass)
(tests:test-set-status! test-id "RUNNING" "PASS" #f #f))
(else ;; 'fail
(set! rollup-status 1) ;; force fail
(tests:test-set-status! test-id "RUNNING" "FAIL" (conc "Failed at step " stepname) #f)
))))
(if (and (steprun-good? logpro-used (vector-ref exit-info 2))
(not (null? tal)))
(if (not run-one) ;; if we got here we completed the step, if run-one is true, stop
(loop (car tal) (cdr tal) stepname runflag))))
(debug:print 4 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))
;; Once done with step/steps update the test record
;;
(let* ((item-path (db:test-get-item-path testdat)) ;; (item-list->path itemdat))
(testinfo (rmt:get-testinfo-by-id run-id test-id))) ;; refresh the testdat, call it iteminfo in case need prev/curr
;; Am I completed?
(if (equal? (db:test-get-state testinfo) "RUNNING") ;; (not (equal? (db:test-get-state testinfo) "COMPLETED"))
(let ((new-state (if kill-job "KILLED" "COMPLETED") ;; (if (eq? (vector-ref exit-info 2) 0) ;; exited with "good" status
;; "COMPLETED"
;; (db:test-get-state testinfo))) ;; else preseve the state as set within the test
)
(new-status (cond
((not (vector-ref exit-info 1)) "FAIL") ;; job failed to run
((eq? rollup-status 0)
;; if the current status is AUTO the defer to the calculated value (i.e. leave this AUTO)
(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO" "PASS"))
((eq? rollup-status 1) "FAIL")
((eq? rollup-status 2)
;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
(else "FAIL")))) ;; (db:test-get-status testinfo)))
(debug:print-info 2 *default-log-port* "Test NOT logged as COMPLETED, (state=" (db:test-get-state testinfo) "), updating result, rollup-status is " rollup-status)
(tests:test-set-status! test-id
new-state
new-status
(args:get-arg "-m") #f)
;; need to update the top test record if PASS or FAIL and this is a subtest
(if (not (equal? item-path ""))
(cdb:set-state-status-and-roll-up-items *runremote* run-id test-name item-path new-status))))
(tests:summarize-items #f run-id test-id test-name #f)) ;; don't force - just update if no
)))
(pop-directory)
rollup-status))
|
|
|
|
|
|
|
|
>
>
>
>
>
>
>
>
>
|
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
|
(debug:print 4 *default-log-port* "Exit value received: " (vector-ref exit-info 2) " logpro-used: " logpro-used
" this-step-status: " this-step-status " overall-status: " overall-status
" next-status: " next-status " rollup-status: " rollup-status)
(case next-status
((warn)
(set! rollup-status 2)
;; NB// test-set-status! does rdb calls under the hood
(tests:test-set-status! run-id test-id "RUNNING" "WARN"
(if (eq? this-step-status 'warn) "Logpro warning found" #f)
#f))
((pass)
(tests:test-set-status! run-id test-id "RUNNING" "PASS" #f #f))
(else ;; 'fail
(set! rollup-status 1) ;; force fail
(tests:test-set-status! run-id test-id "RUNNING" "FAIL" (conc "Failed at step " stepname) #f)
))))
(if (and (steprun-good? logpro-used (vector-ref exit-info 2))
(not (null? tal)))
(if (not run-one) ;; if we got here we completed the step, if run-one is true, stop
(loop (car tal) (cdr tal) stepname runflag))))
(debug:print 4 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))
;; Once done with step/steps update the test record
;;
(let* ((item-path (db:test-get-item-path testdat)) ;; (item-list->path itemdat))
(testinfo (rmt:get-testinfo-state-status run-id test-id))) ;; refresh the testdat, call it iteminfo in case need prev/curr
;; Am I completed?
(if (equal? (db:test-get-state testinfo) "RUNNING") ;; (not (equal? (db:test-get-state testinfo) "COMPLETED"))
(let ((new-state (if kill-job "KILLED" "COMPLETED") ;; (if (eq? (vector-ref exit-info 2) 0) ;; exited with "good" status
;; "COMPLETED"
;; (db:test-get-state testinfo))) ;; else preseve the state as set within the test
)
(new-status (cond
((not (vector-ref exit-info 1)) "FAIL") ;; job failed to run
((eq? rollup-status 0)
;; if the current status is AUTO the defer to the calculated value (i.e. leave this AUTO)
(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO" "PASS"))
((eq? rollup-status 1) "FAIL")
((eq? rollup-status 2)
;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
(else "FAIL")))) ;; (db:test-get-status testinfo)))
(debug:print-info 2 *default-log-port* "Test NOT logged as COMPLETED, (state=" (db:test-get-state testinfo) "), updating result, rollup-status is " rollup-status)
(tests:test-set-status! run-id test-id
new-state
new-status
(args:get-arg "-m") #f)
;; need to update the top test record if PASS or FAIL and this is a subtest
(if (not (equal? item-path ""))
(rmt:set-state-status-and-roll-up-items run-id test-name item-path new-state new-status #f))))
;; for automated creation of the rollup html file this is a good place...
(if (not (equal? item-path ""))
(tests:summarize-items run-id test-id test-name #f)) ;; don't force - just update if no
)))
(pop-directory)
rollup-status))
(define (ezsteps:spawn-run-from testdat start-step-name run-one)
(thread-start!
(make-thread
(lambda ()
(ezsteps:run-from testdat start-step-name run-one))
(conc "ezstep run single step " start-step-name " run-one="run-one)))
)
|