Megatest

Diff
Login

Differences From Artifact [8caa3939b3]:

To Artifact [ae4611e832]:


128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
      (rmt:open-qry-close-locally cmd 0 params)
      )

     ;;DOT CASE3 [label="write in\nread-only mode"];
     ;;DOT MUTEXLOCK -> CASE3 [label="readonly\nmode?"]; {rank=same "case 3" CASE3}
     ;;DOT CASE3 -> "#f";
     ;; readonly mode, write request.  Do nothing, return #f
     (readonly-mode
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case 3")
      (debug:print 0 *default-log-port* "WARNING: write transaction requested on a readonly area.  cmd="cmd" params="params)
      #f)

     ;; This block was for pre-emptively resetting the connection if there had been no communication for some time.
     ;; I don't think it adds any value. If the server is not there, just fail and start a new connection.
     ;; also, the expire-time calculation might not be correct. We want, time-since-last-server-access > (server:get-timeout)
     ;;
     ;;DOT CASE4 [label="reset\nconnection"];
     ;;DOT MUTEXLOCK -> CASE4 [label="have connection,\nlast_access > expire_time"]; {rank=same "case 4" CASE4}







|
<
<
<
<







128
129
130
131
132
133
134
135




136
137
138
139
140
141
142
      (rmt:open-qry-close-locally cmd 0 params)
      )

     ;;DOT CASE3 [label="write in\nread-only mode"];
     ;;DOT MUTEXLOCK -> CASE3 [label="readonly\nmode?"]; {rank=same "case 3" CASE3}
     ;;DOT CASE3 -> "#f";
     ;; readonly mode, write request.  Do nothing, return #f
     (readonly-mode (extras-readonly-mode *rmt-mutex* *default-log-port* cmd params))





     ;; This block was for pre-emptively resetting the connection if there had been no communication for some time.
     ;; I don't think it adds any value. If the server is not there, just fail and start a new connection.
     ;; also, the expire-time calculation might not be correct. We want, time-since-last-server-access > (server:get-timeout)
     ;;
     ;;DOT CASE4 [label="reset\nconnection"];
     ;;DOT MUTEXLOCK -> CASE4 [label="have connection,\nlast_access > expire_time"]; {rank=same "case 4" CASE4}
240
241
242
243
244
245
246


247




248
249
250
251
252
253







254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272























273
274
275








276





277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
      (rmt:open-qry-close-locally cmd (if rid rid 0) params))

     ;;DOT CASE11 [label="send_receive"];
     ;;DOT MUTEXLOCK -> CASE11 [label="else"]; {rank=same "case 11" CASE11};
     ;;DOT CASE11 -> "rmt:send-receive" [label="call failed"];
     ;;DOT CASE11 -> "RESULT" [label="call succeeded"];
     ;; not on homehost, do server query


     (else




      ;; (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9")
      ;; (mutex-lock! *rmt-mutex*)
      (let* ((conninfo (remote-conndat runremote))
	     (dat      (case (remote-transport runremote)
			 ((http) (condition-case ;; handling here has caused a lot of problems. However it is needed to deal with attemtped communication to servers that have gone away







                                  (http-transport:client-api-send-receive 0 conninfo cmd params)
                                  ((commfail)(vector #f "communications fail"))
                                  ((exn)(vector #f "other fail" (print-call-chain)))))
			 (else
			  (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport runremote) " not supported")
			  (exit))))
	     (success  (if (vector? dat) (vector-ref dat 0) #f))
	     (res      (if (vector? dat) (vector-ref dat 1) #f)))
	(if (and (vector? conninfo) (< 5 (vector-length conninfo)))
            (http-transport:server-dat-update-last-access conninfo) ;; refresh access time
	    (begin
              (debug:print 0 *default-log-port* "INFO: Should not get here! conninfo=" conninfo)
              (set! conninfo #f)
              (remote-conndat-set! *runremote* #f)
              (http-transport:close-connections  area-dat: runremote)))
	;; (mutex-unlock! *rmt-mutex*)
        (debug:print-info 13 *default-log-port* "rmt:send-receive, case  9. conninfo=" conninfo " dat=" dat " runremote = " runremote)
	(mutex-unlock! *rmt-mutex*)
	(if success ;; success only tells us that the transport was successful, have to examine the data to see if there was a detected issue at the other end























	    (if (and (vector? res)
		     (eq? (vector-length res) 2)
		     (eq? (vector-ref res 1) 'overloaded)) ;; since we are looking at the data to carry the error we'll use a fairly obtuse combo to minimise the chances of some sort of collision.








                ;; this is the case where the returned data is bad or the server is overloaded and we want





                ;; to ease off the queries
		(let ((wait-delay (+ attemptnum (* attemptnum 10))))
		  (debug:print 0 *default-log-port* "WARNING: server is overloaded. Delaying " wait-delay " seconds and trying call again.")
		  (mutex-lock! *rmt-mutex*)
		  (http-transport:close-connections area-dat: runremote)
		  (set! *runremote* #f) ;; force starting over
		  (mutex-unlock! *rmt-mutex*)
		  (thread-sleep! wait-delay)
		  (rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))
		res) ;; All good, return res
	    (begin
	      (debug:print 0 *default-log-port* "WARNING: communication failed. Trying again, try num: " attemptnum)
	      (mutex-lock! *rmt-mutex*)
              (remote-conndat-set!    runremote #f)
	      (http-transport:close-connections area-dat: runremote)
	      (remote-server-url-set! runremote #f)
	      (mutex-unlock! *rmt-mutex*)
              (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9.1")
	      ;; (if (not (server:check-if-running *toppath*))
	      ;; 	  (server:start-and-wait *toppath*))
	      (rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))))))))

    ;;DOT }
    
;; (define (rmt:update-db-stats run-id rawcmd params duration)
;;   (mutex-lock! *db-stats-mutex*)
;;   (handle-exceptions
;;    exn
;;    (begin
;;      (debug:print 0 *default-log-port* "WARNING: stats collection failed in update-db-stats")
;;      (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))







>
>
|
>
>
>
>
|
|
|
|
|
|
>
>
>
>
>
>
>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<
|
|
|
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
|
|
|
>
>
>
>
>
>
>
>
|
>
>
>
>
>
|
|
|
|
|
|
|
|
|
|
<
<
<
<
<
<
<
<
<
<
<

<
<







236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277

278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330











331


332
333
334
335
336
337
338
      (rmt:open-qry-close-locally cmd (if rid rid 0) params))

     ;;DOT CASE11 [label="send_receive"];
     ;;DOT MUTEXLOCK -> CASE11 [label="else"]; {rank=same "case 11" CASE11};
     ;;DOT CASE11 -> "rmt:send-receive" [label="call failed"];
     ;;DOT CASE11 -> "RESULT" [label="call succeeded"];
     ;; not on homehost, do server query
     (else (extras-case-11 *default-log-port* runremote cmd params attemptnum)))))
    ;;DOT }

;; bunch of small functions factored out of send-receive to make debug easier
;;

(define (extras-case-11 *default-log-port* runremote cmd params attemptnum)
  ;; (mutex-unlock! *rmt-mutex*)
  (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9")
  ;; (mutex-lock! *rmt-mutex*)
  (let* ((conninfo (remote-conndat runremote))
	 (dat      (case (remote-transport runremote)
		     ((http) (condition-case ;; handling here has
					     ;; caused a lot of
					     ;; problems. However it
					     ;; is needed to deal with
					     ;; attemtped
					     ;; communication to
					     ;; servers that have gone
					     ;; away
			      (http-transport:client-api-send-receive 0 conninfo cmd params)
			      ((commfail)(vector #f "communications fail"))
			      ((exn)(vector #f "other fail" (print-call-chain)))))
		     (else
		      (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport runremote) " not supported")
		      (exit))))
	 (success  (if (vector? dat) (vector-ref dat 0) #f))
	 (res      (if (vector? dat) (vector-ref dat 1) #f)))
    (if (and (vector? conninfo) (< 5 (vector-length conninfo)))
	(http-transport:server-dat-update-last-access conninfo) ;; refresh access time
	(begin
	  (debug:print 0 *default-log-port* "INFO: Should not get here! conninfo=" conninfo)
	  (set! conninfo #f)
	  (remote-conndat-set! *runremote* #f) ;; NOTE: *runremote* is global copy of runremote. Purpose: factor out global.
	  (http-transport:close-connections  area-dat: runremote)))

    (debug:print-info 13 *default-log-port* "rmt:send-receive, case  9. conninfo=" conninfo " dat=" dat " runremote = " runremote)
    (mutex-unlock! *rmt-mutex*)
    (if success ;; success only tells us that the transport was
	;; successful, have to examine the data to see if
	;; there was a detected issue at the other end
	(extras-transport-succeded *default-log-port* *rmt-mutex* attemptnum runremote res)
	(extras-transport-failed *default-log-port* *rmt-mutex* attemptnum runremote cmd rid params)
	)))

(define (extras-readonly-mode rmt-mutex log-port cmd params)
  (mutex-unlock! rmt-mutex)
  (debug:print-info 12 log-port "rmt:send-receive, case 3")
  (debug:print 0 log-port "WARNING: write transaction requested on a readonly area.  cmd="cmd" params="params)
  #f)

(define (extras-transport-failed *default-log-port* *rmt-mutex* attemptnum runremote cmd rid params)
  (debug:print 0 *default-log-port* "WARNING: communication failed. Trying again, try num: " attemptnum)
  (mutex-lock! *rmt-mutex*)
  (remote-conndat-set!    runremote #f)
  (http-transport:close-connections area-dat: runremote)
  (remote-server-url-set! runremote #f)
  (mutex-unlock! *rmt-mutex*)
  (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9.1")
  (rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))
  
(define (extras-transport-succeded *default-log-port* *rmt-mutex* attemptnum runremote res)
  (if (and (vector? res)
	   (eq? (vector-length res) 2)
	   (eq? (vector-ref res 1) 'overloaded)) ;; since we are
						 ;; looking at the
						 ;; data to carry the
						 ;; error we'll use a
						 ;; fairly obtuse
						 ;; combo to minimise
						 ;; the chances of
						 ;; some sort of
						 ;; collision.  this
						 ;; is the case where
						 ;; the returned data
						 ;; is bad or the
						 ;; server is
						 ;; overloaded and we
						 ;; want to ease off
						 ;; the queries
      (let ((wait-delay (+ attemptnum (* attemptnum 10))))
	(debug:print 0 *default-log-port* "WARNING: server is overloaded. Delaying " wait-delay " seconds and trying call again.")
	(mutex-lock! *rmt-mutex*)
	(http-transport:close-connections area-dat: runremote)
	(set! *runremote* #f) ;; force starting over
	(mutex-unlock! *rmt-mutex*)
	(thread-sleep! wait-delay)
	(rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))
      res)) ;; All good, return res














;; (define (rmt:update-db-stats run-id rawcmd params duration)
;;   (mutex-lock! *db-stats-mutex*)
;;   (handle-exceptions
;;    exn
;;    (begin
;;      (debug:print 0 *default-log-port* "WARNING: stats collection failed in update-db-stats")
;;      (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))