Megatest

;;======================================================================
;;  S U P P O R T   F U N C T I O N S
;;======================================================================

;; if a server is either running or in the process of starting call client:setup
;; else return #f to let the calling proc know that there is no server available
;;
(define (rmt:get-connection-info areapath #!key (area-dat #f)) ;; TODO: push areapath down.
  (let* ((runremote (or area-dat *runremote*))
	 (cinfo     (if (remote? runremote)

			(remote-conndat runremote)
			#f)))
	  (if cinfo
	      cinfo
	      (if (server:check-if-running areapath)
		  (client:setup areapath)
		  #f))))

(define (rmt:on-homehost? runremote)
  (let* ((hh-dat (remote-hh-dat runremote)))
    (if (pair? hh-dat)
	(cdr hh-dat)
	(begin
	  (debug:print-info 0 *default-log-port* "hh-dat="hh-dat)

			(remote-server-id-set! *runremote* (server:record->id server-info)))))  
	  (set! runremote   *runremote*))) ;; new runremote will come from this on next iteration
    
    ;; DOT SET_HOMEHOST; // leaving off - doesn't really add to the clarity
    ;; DOT MUTEXLOCK -> SET_HOMEHOST [label="no homehost?"];
    ;; DOT SET_HOMEHOST -> MUTEXLOCK;
    ;; ensure we have a homehost record
    (if (not (pair? (remote-hh-dat runremote)))  ;; not on homehost

	(thread-sleep! 0.1) ;; since we shouldn't get here, delay a little
	(let ((hh-data (server:choose-server areapath 'homehost)))
	  (remote-hh-dat-set! runremote (or hh-data (cons #f #f)))))
    
    ;;(print "BB> readonly-mode is "readonly-mode" dbfile is "dbfile)
    (cond
     #;((> (- (current-seconds)(remote-connect-time runremote)) 180) ;; reconnect to server every 180 seconds

     ;; also, the expire-time calculation might not be correct. We want, time-since-last-server-access > (server:get-timeout)
     ;;
     ;;DOT CASE4 [label="reset\nconnection"];
     ;;DOT MUTEXLOCK -> CASE4 [label="have connection,\nlast_access > expire_time"]; {rank=same "case 4" CASE4}
     ;;DOT CASE4 -> "rmt:send-receive";
     ;; reset the connection if it has been unused too long
     ((and runremote
           (remote-conndat runremote)
	   (> (current-seconds) ;; if it has been more than server-timeout seconds since last contact, close this connection and start a new on
	      (+ (http-transport:server-dat-get-last-access (remote-conndat runremote))
		 (remote-server-timeout runremote))))
      (debug:print-info 0 *default-log-port* "Connection to " (remote-server-url runremote) " expired due to no accesses, forcing new connection.")


      (remote-conndat-set! runremote #f) ;; invalidate the connection, thus forcing a new connection.
      (http-transport:close-connections area-dat: runremote)
      (mutex-unlock! *rmt-mutex*)
      (rmt:send-receive cmd rid params attemptnum: attemptnum))
     
     ;;DOT CASE5 [label="local\nread"];
     ;;DOT MUTEXLOCK -> CASE5 [label="server not required,\non homehost,\nread-only query"]; {rank=same "case 5" CASE5};
     ;;DOT CASE5 -> "rmt:open-qry-close-locally";

     ;;DOT CASE6 [label="init\nremote"];
     ;;DOT MUTEXLOCK -> CASE6 [label="on homehost,\nwrite query,\nhave server,\ncan't reach it"]; {rank=same "case 6" CASE6};
     ;;DOT CASE6 -> "rmt:send-receive";
     ;; on homehost and this is a write, we already have a server, but server has died

     ;; reinstate this keep-alive section but inject a time condition into the (add ...
     
     #;((and (cdr (remote-hh-dat runremote))           ;; on homehost
           (not (member cmd api:read-only-queries))  ;; this is a write
           (remote-server-url runremote)             ;; have a server
           (not (server:ping (remote-server-url runremote) (remote-server-id runremote))))  ;; server has died. NOTE: this is not a cheap call! Need better approach.
      (debug:print 0 *default-log-port* "WARNING: server appears to have died, trying to reconnect, case 6")
      (http-transport:close-connections area-dat: runremote) ;; make sure to clean up
      (set! *runremote* (make-remote))
      (let* ((server-info (remote-server-info *runremote*))) 
            (if server-info
		(begin
		  (remote-server-url-set! *runremote* (server:record->url server-info))
                  (remote-server-id-set! *runremote* (server:record->id server-info)))))
      (remote-force-server-set! runremote (common:force-server?))
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  6")
      (rmt:send-receive cmd rid params attemptnum: attemptnum))

     ;;DOT CASE7 [label="homehost\nwrite"];
     ;;DOT MUTEXLOCK -> CASE7 [label="server not required,\non homehost,\na write,\nhave a server"]; {rank=same "case 7" CASE7};
     ;;DOT CASE7 -> "rmt:open-qry-close-locally";
     ;; on homehost and this is a write, we already have a server
     ((and (not (remote-force-server runremote))     ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))           ;; on homehost

      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  8.1")
      (rmt:open-qry-close-locally cmd 0 params)))

     ;;DOT CASE9 [label="force server\nnot on homehost"];
     ;;DOT MUTEXLOCK -> CASE9 [label="no connection\nand either require server\nor not on homehost"]; {rank=same "case 9" CASE9};
     ;;DOT CASE9 -> "start\nserver" -> "rmt:send-receive";
     ((or (and (remote-force-server runremote)              ;; we are forcing a server and don't yet have a connection to one
	       (not (remote-conndat runremote)))
	  (and (not (cdr (remote-hh-dat runremote)))        ;; not on a homehost 
	       (not (remote-conndat runremote))))           ;; and no connection
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case 9, hh-dat: " (remote-hh-dat runremote) " conndat: " (remote-conndat runremote))
      (mutex-unlock! *rmt-mutex*)
      (if (not (server:check-if-running *toppath*)) ;; who knows, maybe one has started up?
	  (server:start-and-wait *toppath*))
      (remote-conndat-set! runremote (rmt:get-connection-info *toppath*)) ;; calls client:setup which calls client:setup-http

      (rmt:send-receive cmd rid params attemptnum: attemptnum)) ;; TODO: add back-off timeout as

     ;;DOT CASE10 [label="on homehost"];
     ;;DOT MUTEXLOCK -> CASE10 [label="server not required,\non homehost"]; {rank=same "case 10" CASE10};
     ;;DOT CASE10 -> "rmt:open-qry-close-locally";
     ;; all set up if get this far, dispatch the query
     ((and (not (remote-force-server runremote))
	   (cdr (remote-hh-dat runremote))) ;; we are on homehost
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case 10")
      (rmt:open-qry-close-locally cmd (if rid rid 0) params))

     ;;DOT CASE11 [label="send_receive"];
     ;;DOT MUTEXLOCK -> CASE11 [label="else"]; {rank=same "case 11" CASE11};
     ;;DOT CASE11 -> "rmt:send-receive" [label="call failed"];
     ;;DOT CASE11 -> "RESULT" [label="call succeeded"];
     ;; not on homehost, do server query
     (else (extras-case-11 *default-log-port* runremote cmd params attemptnum rid)))))
    ;;DOT }

;; No Title 
;; Error: (vector-ref) out of range
;; #(#<condition: (exn type)> (#("db.scm:3740: regex#regexp" #f #f) #("db.scm:3739: regex#string-substitute" #f #f) #("db.scm:3738: base64#base64-decode" #f #f) #("db.scm:3737: z3#z3:decode-buffer" #f #f) #("db.scm:3736: with-input-from-string" #f #f) #("db.scm:3741: s11n#deserialize" #f #f) #("api.scm:374: api:execute-requests" #f #f) #("api.scm:139: call-with-current-continuation" #f #f) #("api.scm:139: with-exception-handler" #f #f) #("api.scm:139: ##sys#call-with-values" #f #f) #("api.scm:158: string->symbol" #f #f) #("api.scm:160: current-milliseconds" #f #f) #("api.scm:161: dbr:dbstruct-read-only" #f #f) #("api.scm:139: k15" #f #f) #("api.scm:139: g19" #f #f) #("api.scm:142: get-call-chain" #f #f)) #("get-test-info-by-id" (1102 507299)))
;; 6
;; 
;; 	Call history:
;; 
;; 	http-transport.scm:306: thread-terminate!	  
;; 	http-transport.scm:307: debug:print-info	  
;; 	common_records.scm:235: debug:debug-mode	  
;; 	rmt.scm:259: k587	  
;; 	rmt.scm:259: g591	  
;; 	rmt.scm:276: http-transport:server-dat-update-last-access	  
;; 	http-transport.scm:364: current-seconds	  
;; 	rmt.scm:282: debug:print-info	  
;; 	common_records.scm:235: debug:debug-mode	  
;; 	rmt.scm:283: mutex-unlock!	  
;; 	rmt.scm:287: extras-transport-succeded	  	<--
;; +-----------------------------------------------------------------------------+
;; | Exit Status    : 70  
;;  

;; bunch of small functions factored out of send-receive to make debug easier
;;

(define (extras-case-11 *default-log-port* runremote cmd params attemptnum rid)
  ;; (mutex-unlock! *rmt-mutex*)
  (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9")
  ;; (mutex-lock! *rmt-mutex*)
  (let* ((conninfo (remote-conndat runremote))
	 (dat-in      (case (remote-transport runremote)
		     ((http) (condition-case ;; handling here has
					     ;; caused a lot of
					     ;; problems. However it
					     ;; is needed to deal with
					     ;; attemtped
					     ;; communication to
					     ;; servers that have gone
					     ;; away
			      (http-transport:client-api-send-receive 0 conninfo cmd params)

                              ((servermismatch)  (vector #f "Server id mismatch" ))
			      ((commfail)(vector #f "communications fail"))
			      ((exn)(vector #f "other fail" (print-call-chain)))))
		     (else
		      (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport runremote) " not supported")
		      (exit))))
	 (dat      (if (and (vector? dat-in) ;; ... check it is a correct size
			    (> (vector-length dat-in) 1))
		       dat-in
		       (vector #f (conc "communications fail (type 2), dat-in=" dat-in))))
	 (success  (if (vector? dat) (vector-ref dat 0) #f))
	 (res      (if (vector? dat) (vector-ref dat 1) #f)))

    (if (and (vector? conninfo) (< 5 (vector-length conninfo)))
	(http-transport:server-dat-update-last-access conninfo) ;; refresh access time
	(begin
	  (debug:print 0 *default-log-port* "INFO: Should not get here! conninfo=" conninfo)
	  (set! conninfo #f)
	  (remote-conndat-set! *runremote* #f) ;; NOTE: *runremote* is global copy of runremote. Purpose: factor out global.
	  (http-transport:close-connections  area-dat: runremote)))
    (debug:print-info 13 *default-log-port* "rmt:send-receive, case  9. conninfo=" conninfo " dat=" dat " runremote = " runremote)
    (mutex-unlock! *rmt-mutex*)
    (if success ;; success only tells us that the transport was
	;; successful, have to examine the data to see if
	;; there was a detected issue at the other end
	(extras-transport-succeded *default-log-port* *rmt-mutex* attemptnum runremote res params rid cmd)
	(begin
           (debug:print-error 0 *default-log-port* " dat=" dat) 

	  (if qry-is-write
	      (let ((start-time (current-seconds)))
		(mutex-lock! *db-multi-sync-mutex*)
/		(set! *db-last-access* start-time)  ;; THIS IS PROBABLY USELESS? (we are on a client)
                (mutex-unlock! *db-multi-sync-mutex*)))))
    res))

(define (rmt:send-receive-no-auto-client-setup connection-info cmd run-id params)
  (let* ((run-id   (if run-id run-id 0))
	 (res  	   ;; (handle-exceptions
		   ;;     exn
		   ;;   (begin
		   ;;     (print "transport failed. exn=" exn)
		   ;;     #f)
		     (http-transport:client-api-send-receive run-id connection-info cmd params))) ;; )
    (if (and res (vector-ref res 0))
	(vector-ref res 1) ;;; YES!! THIS IS CORRECT!! CHANGE IT HERE, THEN CHANGE rmt:send-receive ALSO!!!
	#f)))

;;======================================================================
;;
;; A C T U A L   A P I   C A L L S  

(define (rmt:login run-id)
  (rmt:send-receive 'login run-id (list *toppath* megatest-version (client:get-signature))))

;; This login does no retries under the hood - it acts a bit like a ping.
;; Deprecated for nmsg-transport.
;;
(define (rmt:login-no-auto-client-setup connection-info)
  (case *transport-type* ;; run-id of 0 is just a placeholder
    ((http)(rmt:send-receive-no-auto-client-setup connection-info 'login 0 (list *toppath* megatest-version (client:get-signature))))
    ;;((nmsg)(nmsg-transport:client-api-send-receive run-id connection-info 'login (list *toppath* megatest-version run-id *my-client-signature*)))
    ))

;; hand off a call to one of the db:queries statements
;; added run-id to make looking up the correct db possible 
;;
(define (rmt:general-call stmtname run-id . params)
  (rmt:send-receive 'general-call run-id (append (list stmtname run-id) params)))

  (debug:print-info 12 log-port "rmt:send-receive, case 3")
  (debug:print 0 log-port "WARNING: write transaction requested on a readonly area.  cmd="cmd" params="params)
  #f)

(define (extras-transport-failed *default-log-port* *rmt-mutex* attemptnum runremote cmd rid params)
  (debug:print 0 *default-log-port* "WARNING: communication failed. Trying again, try num: " attemptnum)
  (mutex-lock! *rmt-mutex*)
  (remote-conndat-set!    runremote #f)
  (http-transport:close-connections area-dat: runremote)
  (remote-server-url-set! runremote #f)
  (mutex-unlock! *rmt-mutex*)
  (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9.1")
  (rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))
  
(define (extras-transport-succeded *default-log-port* *rmt-mutex* attemptnum runremote res params rid cmd)
  (if (and (vector? res)

						 ;; server is
						 ;; overloaded and we
						 ;; want to ease off
						 ;; the queries
      (let ((wait-delay (+ attemptnum (* attemptnum 10))))
	(debug:print 0 *default-log-port* "WARNING: server is overloaded. Delaying " wait-delay " seconds and trying call again.")
	(mutex-lock! *rmt-mutex*)
	(http-transport:close-connections area-dat: runremote)
	(set! *runremote* #f) ;; force starting over
	(mutex-unlock! *rmt-mutex*)
	(thread-sleep! wait-delay)
	(rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))
      res)) ;; All good, return res

#;(set-functions rmt:send-receive                       remote-server-url-set!
	       http-transport:close-connections	      remote-conndat-set!
	       debug:print                            debug:print-info
	       remote-ro-mode                         remote-ro-mode-set!
	       remote-ro-mode-checked-set!            remote-ro-mode-checked)