Megatest

		   (if (runs:lownoise "waiting on tasks" 60)(debug:print-info 2 *default-log-port* "waiting for tasks to complete, sleeping briefly ..."))
                   (configf:lookup-number *configdat* "setup" "inter-test-delay" default: 0.1) ;; was 2
		   );; obviously haven't had any work to do for a while
        	  (else 0)))
  
  (let* ((num-running             (rmt:get-count-tests-running run-id))
	 (num-running-in-jobgroup (rmt:get-count-tests-running-in-jobgroup run-id jobgroup))
	 (job-group-limit         (let ((jobg-count (configf:lookup *configdat* "jobgroups" jobgroup)))
				    (if (string? jobg-count)
					(string->number jobg-count)
					jobg-count))))
    (if (> (+ num-running num-running-in-jobgroup) 0)
	(runs:inc-can-run-more-tests-count runsdat)) ;; (set! *runs:can-run-more-tests-count* (+ *runs:can-run-more-tests-count* 1)))
    (if (not (eq? *last-num-running-tests* num-running))
	(begin

	 (test-names         #f)  ;; Generated by a call to (tests:filter-test-names all-test-names test-patts))
	 (required-tests     #f)  ;; Put fully qualified test/testpath names in this list to be done
         (waitors-upon       (make-hash-table)) ;; given a test, return list of tests waiting upon this test.
	 (task-key           (conc (hash-table->alist flags) " " (get-host-name) " " (current-process-id)))
	 ;; (tdbdat             (tasks:open-db))
	 (config-reruns      (let ((x (configf:lookup *configdat* "setup" "reruns")))
			       (if x (string->number x) #f)))
	 (allowed-tests      #f)
	 (runconf            #f))

    ;; check if readonly
    (when readonly-mode
      (debug:print-error 0 *default-log-port* "megatest.db is readonly.  Cannot proceed.")
      (exit 1))

    ;; per user request. If less than 100Meg space on dbdir partition, bail out with error

	  (change-directory *toppath*) ;; PLEASE OPTIMIZE ME!!! I think this should be a no-op but there are several places where change-directories could be happening.
	  (setenv "MT_TEST_NAME" hed) ;; 
	  (let*-values (((waitons waitors config) (tests:get-waitons hed all-tests-registry))

			;; NOTE: Have the config - can extract [waitons] section
			
                        ((hed-mode)
                         (let ((m (configf:lookup config "requirements" "mode")))
                           (if m (map string->symbol (string-split m)) '(normal))))
                        ((hed-itemized-waiton) ;; are items in hed waiting on items of waiton?
                         (not (null? (lset-intersection eq? hed-mode '(itemmatch itemwait)))))
                        )
	    (debug:print-info 8 *default-log-port* "waitons: " waitons)
	    ;; check for hed in waitons => this would be circular, remove it and issue an
	    ;; error
	    (if (or (member hed waitons)
		    (member hed waitors))
		(begin
		  (debug:print-error 0 *default-log-port* "test " hed " has listed itself as a waiton or waitor, please correct this!")
		  (set! waitons (filter (lambda (x)(not (equal? x hed))) waitons))
		  (set! waitors (filter (lambda (x)(not (equal? x hed))) waitors))))
	    
	    ;; (items   (items:get-items-from-config config)))
	    (if (not (hash-table-ref/default test-records hed #f)) ;; waiton-tconfig below will be #f until that test is visted here at least once
		(hash-table-set! test-records ;; BB: we are doing a manual make-tests:testqueue
				 hed (vector hed     ;; 0 ;; testname
					     config  ;; 1 
					     waitons ;; 2 
					     (configf:lookup config "requirements" "priority")     ;; priority 3
					     (tests:get-items config) ;; 4 ;; expand the [items] and or [itemstable] into explict items
					     #f      ;; itemsdat 5
					     #f      ;; spare - used for item-path
					     waitors ;; 
					     )))
            ;; update waitors-upon here
            (for-each

	(debug:print-info 1 *default-log-port* "Adding \"" (string-intersperse required-tests " ") "\" to the run queue"))
    ;; NOTE: these are all parent tests, items are not expanded yet.
    (debug:print-info 4 *default-log-port* "test-records=" (hash-table->alist test-records))
    (let ((reglen (configf:lookup *configdat* "setup" "runqueue")))
      (if (> (length (hash-table-keys test-records)) 0)
	  (let* ((keep-going        #t)
		 (run-queue-retries 5)
		 #;(th1        (make-thread (lambda ()
					    (handle-exceptions
						exn
						(begin
						  (print-call-chain)
						  (print " message: " ((condition-property-accessor 'exn 'message) exn)))
					      (runs:run-tests-queue run-id runname test-records keyvals flags test-patts required-tests
								    (any->number reglen) all-tests-registry)))
					  "runs:run-tests-queue"))
		 (th2        (make-thread (lambda ()			 ;; BBQ: why are we visiting ALL runs here?	    
					    ;; (rmt:find-and-mark-incomplete-all-runs))))) CAN'T INTERRUPT IT ...
					    (let ((run-ids (rmt:get-all-run-ids)))
					      (for-each (lambda (run-id)
							  (if keep-going
							      (handle-exceptions
							       exn
							       (debug:print 0 *default-log-port* "error in calling find-and-mark-incomplete for run-id " run-id)
							       (rmt:find-and-mark-incomplete run-id #f)))) ;; ovr-deadtime))) ;; could be root of https://hsdes.intel.com/appstore/article/#/220546828/main -- Title: Megatest jobs show DEAD even though they are still running (1.64/27)
							run-ids)))
					  "runs: mark-incompletes")))
	    ;; (thread-start! th1)
	    (thread-start! th2)
	    ;; (thread-join! th1)
	    ;; just do the main stuff in the main thread
	    (runs:run-tests-queue run-id runname test-records keyvals flags test-patts required-tests
								    (any->number reglen) all-tests-registry)
	    (set! keep-going #f)
	    (thread-join! th2)
	    ;; if run-count > 0 call, set -preclean and -rerun STUCK/DEAD
	    (if (> run-count 0) ;; handle reruns
		(begin
		  (if (not (hash-table-ref/default flags "-preclean" #f))
		      (hash-table-set! flags "-preclean" #t))

  (let* ((run-info              (rmt:get-run-info run-id))
         (tests-info            (mt:get-tests-for-run run-id #f '() '())) ;;  qryvals: "id,testname,item_path"))
         (sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
         (test-registry         (make-hash-table))
         (registry-mutex        (make-mutex))
         (num-retries           0)
         (max-retries           (configf:lookup *configdat* "setup" "maxretries"))
         (max-concurrent-jobs   (configf:lookup-number *configdat* "setup" "max_concurrent_jobs" default: 50))
         (reglen                (if (number? reglen-in) reglen-in 1))
         (last-time-incomplete  (- (current-seconds) 900)) ;; force at least one clean up cycle
         (last-time-some-running (current-seconds))
         ;; (tdbdat                (tasks:open-db))
         (runsdat (make-runs:dat
                   ;; hed: hed

            ;; (rmt:find-and-mark-incomplete-all-runs)
	    ))

      ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
      (let* ((test-record (hash-table-ref test-records hed))
	     (test-name   (tests:testqueue-get-testname test-record))
	     (tconfig     (tests:testqueue-get-testconfig test-record))
	     (jobgroup    (configf:lookup tconfig "test_meta" "jobgroup"))
	     (testmode    (let ((m (configf:lookup tconfig "requirements" "mode")))
			    (if m (map string->symbol (string-split m)) '(normal))))
	     (itemmaps    (tests:get-itemmaps tconfig)) ;;  (configf:lookup tconfig "requirements" "itemmap"))
	     (priority    (tests:testqueue-get-priority   test-record))
	     (itemdat     (tests:testqueue-get-itemdat    test-record)) ;; itemdat can be a string, list or #f
	     (items       (tests:testqueue-get-items      test-record))
	     (item-path   (item-list->path itemdat))
	     (tfullname   (db:test-make-full-name test-name item-path))

          (let* ((items-in-testpatt
                  (filter
                   (lambda (my-itemdat)
                     (tests:match test-patts hed (item-list->path my-itemdat) ))
                   ;; was: (tests:match test-patts hed (item-list->path my-itemdat) required: required-tests))
                   items) ))
            (if (null? items-in-testpatt)

                (debug:print-error 0 *default-log-port* "Test " (tests:testqueue-get-testname test-record) " is itemized but has no items matching the test pattern")


                
                (for-each (lambda (my-itemdat)
                            (let* ((new-test-record (let ((newrec (make-tests:testqueue)))
                                                      (vector-copy! test-record newrec)
                                                      newrec))
                                   (my-item-path (item-list->path my-itemdat))

          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-8")
	  (debug:print-info 0 *default-log-port* "Have leftovers!")
	  (loop (car reg)(cdr reg) '() reruns))
	 (else
          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-9")
	  (debug:print-info 4 *default-log-port* "Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	 ))) ;; end loop on sorted test names
    ;; this is the point where everything is launched and now you can mark the run in metadata table as all launched 
    (rmt:set-var (conc "lunch-complete-" run-id) "yes")
  
    ;; now *if* -run-wait we wait for all tests to be done
    ;; Now wait for any RUNNING tests to complete (if in run-wait mode)
    (thread-sleep! 10) ;; I think there is a race condition here. Let states/statuses settle
    (let wait-loop ((num-running      (rmt:get-count-tests-running-for-run-id run-id))
		    (prev-num-running 0))

		  ;; currently running
		  ((and skip-check
			(configf:lookup test-conf "skip" "prevrunning"))
		   ;; run-ids = #f means *all* runs
		   (let ((running-tests (rmt:get-tests-for-runs-mindata #f full-test-name '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED") '() #f)))
		     (if (not (null? running-tests)) ;; have to skip 
			 (set! skip-test "Skipping due to previous tests running"))))

		  ((and skip-check
			(configf:lookup test-conf "skip" "fileexists"))
		   (if (common:file-exists? (configf:lookup test-conf "skip" "fileexists"))
		       (set! skip-test (conc "Skipping due to existance of file " (configf:lookup test-conf "skip" "fileexists")))))

		  ((and skip-check
			(configf:lookup test-conf "skip" "filenotexists"))
		   (if (not (common:file-exists? (configf:lookup test-conf "skip" "filenotexists")))
		       (set! skip-test (conc "Skipping due to non existance of file " (configf:lookup test-conf "skip" "filenotexists")))))
		 
                  ((and skip-check
			(configf:lookup test-conf "skip" "script"))
		   (if (= (system (configf:lookup test-conf "skip" "script")) 0)
                        (set! skip-test (conc "Skipping due to zero return value of script " (configf:lookup test-conf "skip" "script")))))
      
                  ((and skip-check
			(configf:lookup test-conf "skip" "rundelay"))
		   ;; run-ids = #f means *all* runs
		   (let* ((numseconds      (common:hms-string->seconds (configf:lookup test-conf "skip" "rundelay")))
			  (running-tests   (rmt:get-tests-for-runs-mindata #f full-test-name '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED") '() #f))
			  (completed-tests (rmt:get-tests-for-runs-mindata #f full-test-name '("COMPLETED" "INCOMPLETE") '("PASS" "FAIL" "ABORT") #f)) ;; ironically INCOMPLETE is same as COMPLETED in this contex
			  (last-run-times  (map db:mintest-get-event_time completed-tests))
			  (time-since-last (- (current-seconds) (if (null? last-run-times) 0 (common:max last-run-times)))))

	(begin
	  (set! currrecord (make-vector 11 #f))
	  (rmt:testmeta-add-record test-name)))
    (for-each 
     (lambda (key)
       (let* ((idx (cadr key))
	      (fld (car  key))
	      (val (configf:lookup test-conf "test_meta" fld)))
	 ;; (debug:print 5 *default-log-port* "idx: " idx " fld: " fld " val: " val)
	 (if (and val (not (equal? (vector-ref currrecord idx) val)))
	     (begin
	       (print "Updating " test-name " " fld " to " val)
	       (rmt:testmeta-update-field test-name fld val)))))
     '(("author" 2)("owner" 3)("description" 4)("reviewed" 5)("tags" 9)("jobgroup" 10)))))

       (let* ((test-conf    (mt:lazy-read-test-config test-name)))
	 (if test-conf (runs:update-test_meta test-name test-conf))))
     (hash-table-keys test-names))))

;; This could probably be refactored into one complex query ...
;; NOT PORTED - DO NOT USE YET
;;
#;(define (runs:rollup-run keys runname user keyvals)
  (debug:print 4 *default-log-port* "runs:rollup-run, keys: " keys " -runname " runname " user: " user)
  (let* ((db              #f)
	 ;; register run operates on the main db
	 (new-run-id      (rmt:register-run keyvals runname "new" "n/a" user (args:get-arg "-contour")))
	 (prev-tests      (rmt:get-matching-previous-test-run-records new-run-id "%" "%"))
	 (curr-tests      (mt:get-tests-for-run new-run-id "%/%" '() '()))
	 (curr-tests-hash (make-hash-table)))