Megatest

;;
(define (dboard:common-set-tabdat! commondat tabnum tabdat)
  (hash-table-set!
   (dboard:commondat-tabdats commondat)
   tabnum
   tabdat))

(define *updater-running* #f) ;; move this into one of the stucts

;; gets and calls updater list based on curr-tab-num
;;
(define (dboard:common-run-curr-updaters commondat #!key (tab-num #f))
  (if (dboard:common-get-tabdat commondat tab-num: tab-num) ;; only update if there is a tabdat
      (let* ((tnum     (or tab-num (dboard:commondat-curr-tab-num commondat)))
	     (updaters (hash-table-ref/default (dboard:commondat-updaters commondat)
					       tnum

	 (curr-updaters (hash-table-ref/default (dboard:commondat-updaters commondat) tnum '())))
    (hash-table-set! (dboard:commondat-updaters commondat)
		     tnum
		     (cons updater curr-updaters))))

;; data for each specific tab goes here
;;
(defstruct dboard:tabdat
  ;; flags
  ((already-running #f)                  : boolean)     ;; the updater is already running. skip
  ;; runs
  ((allruns         '())                 : list)        ;; list of dboard:rundat records
  ((allruns-by-id    (make-hash-table))  : hash-table)  ;; hash of run-id -> dboard:rundat records
  ((done-runs       '())                 : list)        ;; list of runs already drawn
  ((not-done-runs   '())                 : list)        ;; list of runs not yet drawn
  (header            #f)                                ;; header for decoding the run records
  (keys              #f)                                ;; keys for this run (i.e. target components)

;;
;;    NOTE: Yes, this is used
;;
(define (dboard:get-tests-for-run-duplicate tabdat run-id run testnamepatt key-vals)
  (let* ((start-time   (current-seconds))
	 (access-mode  (dboard:tabdat-access-mode tabdat))
         (num-to-get   (string->number (or (configf:lookup *configdat* "setup" "num-tests-to-get")
                                           "100"))) ;; was 200, which is fine in a normal run area.
	 (states       (hash-table-keys (dboard:tabdat-state-ignore-hash tabdat)))
	 (statuses     (hash-table-keys (dboard:tabdat-status-ignore-hash tabdat)))
         (do-not-use-db-file-timestamps #t) ;; (configf:lookup *configdat* "setup" "do-not-use-db-file-timestamps")) ;; this still hosts runs-summary-tab
         (do-not-use-query-timestamps   #t) ;; (configf:lookup *configdat* "setup" "do-not-use-query-timestamps")) ;; this no longer troubles runs-summary-tab
	 (sort-info    (get-curr-sort))
	 (sort-by      (vector-ref sort-info 1))
	 (sort-order   (vector-ref sort-info 2))

    ;;
    ;; (debug:print 0 *default-log-port* "got-all: " got-all " multi-get: " multi-get " num-to-get: " num-to-get " (length tmptests): " (length tmptests) " db-modified: " db-modified " db-mod-time: " db-mod-time " db-path: " db-path)
    (if got-all
	(begin
	  (dboard:rundat-last-update-set!     run-dat (- start-time 2))
	  (dboard:rundat-run-data-offset-set! run-dat 0))
	(begin
	  ;;; (thread-sleep! 0.25) ;; give the rest of the gui some time to update. <-- this did NOT help
	  (dboard:rundat-run-data-offset-set! run-dat
					      (+ num-to-get (dboard:rundat-run-data-offset run-dat)))))

    (for-each 
     (lambda (tdat)
       (let ((test-id (db:test-get-id tdat))
	     (state   (db:test-get-state tdat)))

;; this calls dboard:get-tests-for-run-duplicate for each run
;;
;; create a virtual table of all the tests
;; keypatts: ( (KEY1 "abc%def")(KEY2 "%") )
;;
(define (dboard:update-rundat tabdat runnamepatt numruns testnamepatt keypatts)
  (dboard:tabdat-already-running-set! tabdat #t)
  (let* (;; (already-running  (dboard:tabdat-already-running tabdat))
	 (access-mode      (dboard:tabdat-access-mode tabdat))
         (keys             (dboard:tabdat-keys tabdat)) ;; (db:dispatch-query access-mode rmt:get-keys db:get-keys)))
	 (last-runs-update (- (dboard:tabdat-last-runs-update tabdat) 2))
         (allruns          (rmt:get-runs runnamepatt numruns (dboard:tabdat-start-run-offset tabdat) keypatts))
         ;;(allruns-tree (rmt:get-runs-by-patt (dboard:tabdat-keys tabdat) "%" #f #f #f #f))
         (allruns-tree    (rmt:get-runs-by-patt keys "%" #f #f #f #f 0)) ;; last-runs-update));;'("id" "runname")
	 (header      (db:get-header allruns))
	 (runs        (db:get-rows   allruns)) ;; RA => Filtered as per runpatt selected

		   (elapsed-time (- (current-seconds) start-time)))
	      (if (null? all-test-ids)
		  (hash-table-delete! (dboard:tabdat-allruns-by-id tabdat) run-id)
		  (hash-table-set!    (dboard:tabdat-allruns-by-id tabdat) run-id run-struct))
	      (if (or (null? tal)
		      (> elapsed-time 2)) ;; stop loading data after 5 seconds, on the next call more data *should* be loaded since get-tests-for-run uses last update
		  (begin
		    #;(when (> elapsed-time 2)   
                      (debug:print 0 *default-log-port* "NOTE: updates are taking a long time, " elapsed-time "s elapsed.")
                      (let* ((old-val (iup:attribute *tim* "TIME"))
                             (new-val (number->string (inexact->exact (floor (* 2  (string->number old-val)))))))
                        (if (< (string->number new-val) 5000)
                            (begin
			      (debug:print 0 *default-log-port* "NOTE: increasing poll interval from "old-val" to "new-val)
			      (iup:attribute-set! *tim* "TIME" new-val)))))



		    (dboard:tabdat-allruns-set! tabdat new-res)
		    maxtests)
		  (if (> (dboard:rundat-run-data-offset run-struct) 0)
		      (loop run tal new-res newmaxtests) ;; not done getting data for this run
		      (loop (car tal)(cdr tal) new-res newmaxtests)))))))
    (dboard:tabdat-filters-changed-set! tabdat #f)
    (dboard:update-tree tabdat runs-hash header tb)
    (dboard:tabdat-already-running-set! tabdat #f)))

(define *collapsed* (make-hash-table))

(define (toggle-hide lnum uidat) ; fulltestname)
  (let* ((btn (vector-ref (dboard:uidat-get-lftcol uidat) lnum))
	 (fulltestname (iup:attribute btn "TITLE"))
	 (parts        (string-split fulltestname "("))

            sort-lb))) 
	)

        ;; insert extra widget here
        (if extra-widget
            extra-widget
            (iup:hbox)) ;; empty widget




        )))

     (let* ((status-toggles (map (lambda (status)
				   (iup:toggle (conc status)
					       #:fontsize 8 ;; btn-fontsz ;; "10"
					       ;; #:expand "HORIZONTAL"
					       #:action   (lambda (obj val)

;;  removing the tabdat-values proc 
;;
;; (define (tabdat-values tabdat)

;; runs update-rundat using the various filters from the gui
;;
(define (dashboard:do-update-rundat tabdat)
  ;; this seems like a good place to check for already running and skip if so
  ;;
  ;; (set! *updater-running* #t)
;;(if (dboard:tabdat-already-running tabdat)
;;    (begin
;;	(debug:print-info 0 *default-log-port* "Dashboard overloaded - updates will be slow, skipping update.")
;;	(dboard:tabdat-target tabdat))
  (dboard:update-rundat
   tabdat
   (hash-table-ref/default (dboard:tabdat-searchpatts tabdat) "runname" "%")
   (dboard:tabdat-numruns tabdat)
   (hash-table-ref/default (dboard:tabdat-searchpatts tabdat) "test-name" "%/%")
   ;; generate key patterns from the target stored in tabdat
   (let* ((dbkeys (dboard:tabdat-dbkeys tabdat)))
     (let ((fres   (if (dboard:tabdat-target tabdat)
		       (let ((ptparts (append (dboard:tabdat-target tabdat)(make-list (length dbkeys) "%"))))
			 (map (lambda (k v)(list k v)) dbkeys ptparts))
		       (let ((res '()))
			 (for-each (lambda (key)
				     (if (not (equal? key "runname"))
					 (let ((val (hash-table-ref/default (dboard:tabdat-searchpatts tabdat) key #f)))
					   (if val (set! res (cons (list key val) res))))))
				   dbkeys)
			 res))))
       fres)))
  #;(set! *updater-running* #f))

(define (dashboard:runs-tab-updater commondat tab-num)
  (debug:catch-and-dump 
   (lambda ()
     (let* ((tabdat (dboard:common-get-tabdat commondat tab-num: tab-num))
	    (dbkeys (dboard:tabdat-dbkeys tabdat)))
       (dashboard:do-update-rundat tabdat)

	 commondat 
	 (lambda ()
	   (dashboard:runs-tab-updater commondat 1))
	 tab-num: 2)
	(iup:callback-set! *tim*
			   "ACTION_CB"
			   (lambda (time-obj)
			     (if (not *updater-running*)
				 (begin
				   ;; (mutex-lock! (dboard:commondat-update-mutex commondat))
				   ;; (set! update-is-running (dboard:commondat-updating commondat))
				   ;;(if (not update-is-running)
				   ;;	   (dboard:commondat-updating-set! commondat #t))
				   ;;(mutex-unlock! (dboard:commondat-update-mutex commondat))
				   ;;(if (not update-is-running) ;; we know that the update was not running and we now have a lock on doing an update
				   ;;	   (begin
				   (set! *updater-running* #t)
				   (dboard:common-run-curr-updaters commondat) ;; (dashboard:run-update commondat)
				   (set! *updater-running* #f)
				   ;; (mutex-lock! (dboard:commondat-update-mutex commondat))
				   ;;  (dboard:commondat-updating-set! commondat #f)
				   ;;   (mutex-unlock! (dboard:commondat-update-mutex commondat)))
				   ))
			     1))))
      
      (let ((th1 (make-thread (lambda ()
				(thread-sleep! 1)
				(dboard:common-run-curr-updaters commondat 0) ;; force update of summary tab 
				) "update buttons once"))