Megatest

					#t
					(loop (car tal)(cdr tal)))
				    #f))))))
	    (pop-directory)
	    result)))))

;; Do not rpc this one, do the underlying calls!!!
(define (tests:test-set-status! area-dat run-id test-id state status comment dat #!key (work-area #f))
  (let* ((real-status status)
	 (otherdat    (if dat dat (make-hash-table)))
	 (testdat     (rmt:get-test-info-by-id area-dat run-id test-id))
	 (test-name   (db:test-get-testname  testdat))
	 (item-path   (db:test-get-item-path testdat))
	 ;; before proceeding we must find out if the previous test (where all keys matched except runname)
	 ;; was WAIVED if this test is FAIL

	 ;; NOTES:
	 ;;  1. Is the call to test:get-previous-run-record remotified?
	 ;;  2. Add test for testconfig waiver propagation control here
	 ;;
	 (prev-test   (if (equal? status "FAIL")
			  (rmt:get-previous-test-run-record area-dat run-id test-name item-path)
			  #f))
	 (waived   (if prev-test
		       (if prev-test ;; true if we found a previous test in this run series
			   (let ((prev-status  (db:test-get-status  prev-test))
				 (prev-state   (db:test-get-state   prev-test))
				 (prev-comment (db:test-get-comment prev-test)))
			     (debug:print 4 *default-log-port* "prev-status " prev-status ", prev-state " prev-state ", prev-comment " prev-comment)

	(set! real-status "WAIVED"))

    (debug:print 4 *default-log-port* "real-status " real-status ", waived " waived ", status " status)

    ;; update the primary record IF state AND status are defined
    (if (and state status)
	(begin
	  (rmt:set-state-status-and-roll-up-items area-dat run-id test-id item-path state real-status (if waived waived comment))
	  ;; (mt:process-triggers run-id test-id state real-status) ;; triggers are called in test-set-state-status
	  ))
    
    ;; if status is "AUTO" then call rollup (note, this one modifies data in test
    ;; run area, it does remote calls under the hood.
    ;; (if (and test-id state status (equal? status "AUTO")) 
    ;; 	(rmt:test-data-rollup area-dat run-id test-id status))

    ;; add metadata (need to do this way to avoid SQL injection issues)

    ;; :first_err
    ;; (let ((val (hash-table-ref/default otherdat ":first_err" #f)))
    ;;   (if val
    ;;       (sqlite3:execute db "UPDATE tests SET first_err=? WHERE run_id=? AND testname=? AND item_path=?;" val run-id test-name item-path)))

			   value    ","
			   expected ","
			   tol      ","
			   units    ","
			   dcomment ",," ;; extra comma for status
			   type     )))
	    ;; This was run remote, don't think that makes sense. Perhaps not, but that is the easiest path for the moment.
	    (rmt:csv->test-data area-dat run-id test-id
				dat))))
      
    ;; need to update the top test record if PASS or FAIL and this is a subtest
    ;;;;;; (if (not (equal? item-path ""))
    ;;;;;;     (rmt:set-state-status-and-roll-up-items area-dat run-id test-name item-path state status #f) ;;;;;)

    (if (or (and (string? comment)
		 (string-match (regexp "\\S+") comment))
	    waived)
	(let ((cmt  (if waived waived comment)))
	  (rmt:general-call area-dat 'set-test-comment run-id cmt test-id)))))

(define (tests:test-set-toplog! area-dat run-id test-name logf) 
  (rmt:general-call area-dat 'tests:test-set-toplog run-id logf run-id test-name))

(define (tests:summarize-items area-dat run-id test-id test-name force)
  ;; if not force then only update the record if one of these is true:
  ;;   1. logf is "log/final.log
  ;;   2. logf is same as outputfilename
  (let* ((outputfilename (conc "megatest-rollup-" test-name ".html"))
	 (orig-dir       (current-directory))
	 (logf-info      (rmt:test-get-logfile-info area-dat run-id test-name))
	 (logf           (if logf-info (cadr logf-info) #f))
	 (path           (if logf-info (car  logf-info) #f)))
    ;; This query finds the path and changes the directory to it for the test
    (if (and (string? path)
	     (directory? path)) ;; can get #f here under some wierd conditions. why, unknown ...
	(begin
	  (debug:print 4 *default-log-port* "Found path: " path)
	  (change-directory path))
	;; (set! outputfilename (conc path "/" outputfilename)))
	(debug:print-error 0 *default-log-port* "summarize-items for run-id=" run-id ", test-name=" test-name ", no such path: " path))
    (debug:print 4 *default-log-port* "summarize-items with logf " logf ", outputfilename " outputfilename " and force " force)
    (if (or (equal? logf "logs/final.log")
	    (equal? logf outputfilename)
	    force)
	(let ((my-start-time (current-seconds))
	      (lockf         (conc outputfilename ".lock")))
	  (let loop ((have-lock  (common:simple-file-lock lockf)))
	    (if have-lock
		(let ((script (configf:lookup *configdat* "testrollup" test-name)))
		  (print "Obtained lock for " outputfilename)
		  (rmt:set-state-status-and-roll-up-items area-dat run-id test-name "" #f #f #f)
		  (if script
		      (system (conc script " > " outputfilename " & "))
		      (tests:generate-html-summary-for-iterated-test area-dat run-id test-id test-name outputfilename))
		  (common:simple-file-release-lock lockf)
		  (change-directory orig-dir)
		  ;; NB// tests:test-set-toplog! is remote internal...
		  (tests:test-set-toplog! area-dat run-id test-name outputfilename))
		;; didn't get the lock, check to see if current update started later than this 
		;; update, if so we can exit without doing any work
		(if (> my-start-time (file-modification-time lockf))
		    ;; we started since current re-gen in flight, delay a little and try again
		    (begin
		      (debug:print-info 1 *default-log-port* "Waiting to update " outputfilename ", another test currently updating it")
		      (thread-sleep! (+ 5 (random 5))) ;; delay between 5 and 10 seconds
		      (loop (common:simple-file-lock lockf))))))))))

(define (tests:generate-html-summary-for-iterated-test area-dat run-id test-id test-name outputfilename)
  (let ((counts              (make-hash-table))
	(statecounts         (make-hash-table))
	(outtxt              "")
	(tot                 0)
	(testdat             (rmt:test-get-records-for-index-file area-dat run-id test-name)))
    (with-output-to-file outputfilename
      (lambda ()
	(set! outtxt (conc outtxt "<html><title>Summary: " test-name 
			   "</title><body><h2>Summary for " test-name "</h2>"))
	(for-each
	 (lambda (testrecord)
	   (let ((id             (vector-ref testrecord 0))

	(print "<tr><td>Total</td><td>" tot "</td></tr></table>")
	(print "</td></td></tr></table>")
	
	(print "<table cellspacing=\"0\" border=\"1\">" 
	       "<tr><td>Item</td><td>State</td><td>Status</td><td>Comment</td>"
	       outtxt "</table></body></html>")
	;; (release-dot-lock outputfilename)
	;;(rmt:update-run-stats area-dat 
	;; run-id
	;; (hash-table-map
	;;  state-status-counts
	;;  (lambda (key val)
	;;	(append key (list val)))))
	))))

)

(define (tests:run-record->test-path run numkeys)
   (append (take (vector->list run) numkeys)
	   (list (vector-ref run (+ 1 numkeys)))))


(define (tests:get-rest-data area-dat runs header numkeys)
   (let ((resh (make-hash-table)))
   (for-each
     (lambda (run)
        (let* ((run-id (db:get-value-by-header run header "id"))
               (run-dir      (tests:run-record->test-path run numkeys))
	       (test-data    (rmt:get-tests-for-run area-dat
				   run-id
                                   "%"       ;; testnamepatt
				   '()        ;; states
				   '()        ;; statuses
				   #f         ;; offset
				   #f         ;; num-to-get
				   #f         ;; hide/not-hide

               (hash-table-set!  (hash-table-ref/default (hash-table-ref/default resh test-name  #f) test-item #f) run-id (list test-status test-html-path)))) 
        test-data)))
      runs)
   resh))

;; (tests:create-html-tree "test-index.html")
;;
(define (tests:create-html-tree area-dat outf)
   (let* ((lockfile  (conc outf ".lock"))
	 (runs-to-process '())
         (linktree  (common:get-linktree))
          (area-name (common:get-testsuite-name))
	  (keys      (rmt:get-keys area-dat))
	  (numkeys   (length keys))
         (total-runs  (rmt:get-num-runs area-dat "%"))
         (pg-size 10)   )
    (if (common:simple-file-lock lockfile)
        (begin
         (print total-runs)    
        (let loop ((page 0))
	(let* ((oup       (open-output-file (or outf (conc linktree "/page" page ".html"))))
               (start (* page pg-size)) 
	       (runsdat   (rmt:get-runs area-dat "%" pg-size start (map (lambda (x)(list x "%")) keys)))
	       (header    (vector-ref runsdat 0))
	       (runs      (vector-ref runsdat 1))
               (ctr 0)
               (test-runs-hash (tests:get-rest-data area-dat runs header numkeys))
               (test-list (hash-table-keys test-runs-hash))
               (get-prev-links (lambda (page linktree )   
                            (let* ((link  (if (not (eq? page 0))
                                            (s:a "<<prev" 'href (conc  linktree "/page" (- page 1) ".html"))
                                            (s:a "" 'href (conc  linktree "/page"  page ".html")))))
                               link)))
                (get-next-links (lambda (page linktree total-runs)   

	#f)))






(define (tests:create-html-tree-old area-dat outf)
   (let* ((lockfile  (conc outf ".lock"))
	 (runs-to-process '()))
    (if (common:simple-file-lock lockfile)
	(let* ((linktree  (common:get-linktree))
	       (oup       (open-output-file (or outf (conc linktree "/runs-index.html"))))
	       (area-name (common:get-testsuite-name))
	       (keys      (rmt:get-keys area-dat))
	       (numkeys   (length keys))
	       (runsdat   (rmt:get-runs area-dat "%" #f #f (map (lambda (x)(list x "%")) keys)))
	       (header    (vector-ref runsdat 0))
	       (runs      (vector-ref runsdat 1))
	       (runtreedat (map (lambda (x)
				  (tests:run-record->test-path x numkeys))
				runs))
	       (runs-htree (common:list->htree runtreedat)))
	  (set! runs-to-process runs)

	  (common:simple-file-release-lock lockfile)
               
	  (for-each
	   (lambda (run)
	     (let* ((test-subpath (tests:run-record->test-path run numkeys))
		    (run-id       (db:get-value-by-header run header "id"))
                    (run-dir      (tests:run-record->test-path run numkeys))
		    (test-dats    (rmt:get-tests-for-run area-dat
				   run-id
                                   "%/"       ;; testnamepatt
				   '()        ;; states
				   '()        ;; statuses
				   #f         ;; offset
				   #f         ;; num-to-get
				   #f         ;; hide/not-hide

                                                                          (html-file (if (file-exists? alt-file)
                                                                                         alt-file
                                                                                         std-file))
                                                                          (run-name  (car (reverse p))))
                                                                     (if (and (not (file-exists? full-targ))
                                                                              (directory? full-targ)
                                                                              (file-write-access? full-targ))
                                                                         (tests:summarize-test area-dat
                                                                          run-id 
                                                                          (rmt:get-test-id area-dat run-id test-name item-path)))
                                                                     (if (file-exists? full-targ)
                                                                         (s:a run-name 'href html-file)
                                                                         (begin
                                                                           (debug:print 0 *default-log-port* "ERROR: can't access " full-targ)
                                                                           (conc "No summary for " run-name)))))
                                                                 ))))))
                     (close-output-port oup)))))

		      ((eq? (tdb:step-get-event_time a)(tdb:step-get-event_time b)) 
		       (<   (tdb:step-get-id a)        (tdb:step-get-id b)))
		      (else #f)))))
      res))

;; 
;;
(define (tests:get-compressed-steps area-dat run-id test-id)
  (let* ((steps-data  (rmt:get-steps-for-test area-dat run-id test-id))
	 (comprsteps  (tests:process-steps-table steps-data))) ;; (open-run-close db:get-steps-table #f test-id work-area: work-area)))
    (map (lambda (x)
	   ;; take advantage of the \n on time->string
	   (vector
	    (vector-ref x 0)
	    (let ((s (vector-ref x 1)))
	      (if (number? s)(seconds->time-string s) s))

					 (conc (vector-ref b 2)))
			       #f))
		       (string<? (conc time-a)(conc time-b)))))))))


;; summarize test in to a file test-summary.html in the test directory
;;
(define (tests:summarize-test area-dat run-id test-id)
  (let* ((test-dat  (rmt:get-test-info-by-id area-dat run-id test-id))
	 (steps-dat (rmt:get-steps-for-test area-dat run-id test-id))
	 (test-name (db:test-get-testname test-dat))
	 (item-path (db:test-get-item-path test-dat))
	 (full-name (db:test-make-full-name test-name item-path))
	 (oup       (open-output-file (conc (db:test-get-rundir test-dat) "/test-summary.html")))
	 (status    (db:test-get-status   test-dat))
	 (color     (common:get-color-from-status status))
	 (logf      (db:test-get-final_logf test-dat))
	 (steps-dat (tests:get-compressed-steps area-dat run-id test-id)))
    ;; (dcommon:get-compressed-steps #f 1 30045)
    ;; (#("wasting_time" "23:36:13" "23:36:21" "0" "8.0s" "wasting_time.log"))

    (s:output-new
     oup
     (s:html
      (s:title "Summary for " full-name)

	     steps-dat))
	)))
    (close-output-port oup)))
	  
	  
;; MUST BE CALLED local!
;;
(define (tests:test-get-paths-matching area-dat keynames target fnamepatt #!key (res '()))
  ;; BUG: Move the values derived from args to parameters and push to megatest.scm
  (let* ((testpatt   (or (args:get-arg "-testpatt")(args:get-arg "-testpatt") "%"))
	 (statepatt  (or (args:get-arg "-state")   (args:get-arg ":state")    "%"))
	 (statuspatt (or (args:get-arg "-status")  (args:get-arg ":status")   "%"))
	 (runname    (or (args:get-arg "-runname") (args:get-arg ":runname")  "%"))
	 (paths-from-db (rmt:test-get-paths-matching-keynames-target-new area-dat keynames target res
					testpatt
					statepatt
					statuspatt
					runname)))
    (if fnamepatt
	(apply append 
	       (map (lambda (p)

	  (with-input-from-file fname
	    (lambda ()
	      (read-lines)))))))
	  

;; for each test:
;;   
(define (tests:filter-non-runnable area-dat run-id testkeynames testrecordshash)
  (let ((runnables '()))
    (for-each
     (lambda (testkeyname)
       (let* ((test-record (hash-table-ref testrecordshash testkeyname))
	      (test-name   (tests:testqueue-get-testname  test-record))
	      (itemdat     (tests:testqueue-get-itemdat   test-record))
	      (item-path   (tests:testqueue-get-item_path test-record))
	      (waitons     (tests:testqueue-get-waitons   test-record))
	      (keep-test   #t)
	      (test-id     (rmt:get-test-id area-dat run-id test-name item-path))
	      (tdat        (rmt:get-testinfo-state-status area-dat run-id test-id))) ;; (cdb:get-test-info-by-id *runremote* test-id)))
	 (if tdat
	     (begin
	       ;; Look at the test state and status
	       (if (or (and (member (db:test-get-status tdat) 
				    '("PASS" "WARN" "WAIVED" "CHECK" "SKIP"))
			    (equal? (db:test-get-state tdat) "COMPLETED"))
		       (member (db:test-get-state tdat)
				    '("INCOMPLETE" "KILLED")))
		   (set! keep-test #f))

	       ;; examine waitons for any fails. If it is FAIL or INCOMPLETE then eliminate this test
	       ;; from the runnable list
	       (if keep-test
		   (for-each (lambda (waiton)
			       ;; for now we are waiting only on the parent test
			       (let* ((parent-test-id (rmt:get-test-id area-dat run-id waiton ""))
				      (wtdat          (rmt:get-testinfo-state-status area-dat run-id test-id))) ;; (cdb:get-test-info-by-id *runremote* test-id)))
				 (if (or (and (equal? (db:test-get-state wtdat) "COMPLETED")
					      (member (db:test-get-status wtdat) '("FAIL" "ABORT")))
					 (member (db:test-get-status wtdat)  '("KILLED"))
					 (member (db:test-get-state wtdat)   '("INCOMPETE")))
				 ;; (if (or (member (db:test-get-status wtdat)
				 ;;        	 '("FAIL" "KILLED"))
				 ;;         (member (db:test-get-state wtdat)

;;======================================================================
;; test steps
;;======================================================================

;; teststep-set-status! used to be here

(define (test-get-kill-request area-dat run-id test-id) ;; run-id test-name itemdat)
  (let* ((testdat   (rmt:get-test-info-by-id area-dat run-id test-id)))
    (and testdat
	 (equal? (test:get-state testdat) "KILLREQ"))))

(define (test:tdb-get-rundat-count tdb)
  (if tdb
      (let ((res 0))
	(sqlite3:for-each-row
	 (lambda (count)
	   (set! res count))
	 tdb
	 "SELECT count(id) FROM test_rundat;")
	res))
  0)

(define (tests:update-central-meta-info area-dat run-id test-id cpuload diskfree minutes uname hostname)
  (rmt:general-call area-dat 'update-test-rundat run-id test-id (current-seconds) (or cpuload -1)(or diskfree -1) -1 (or minutes -1))
  (if (and cpuload diskfree)
      (rmt:general-call area-dat 'update-cpuload-diskfree run-id cpuload diskfree test-id))
  (if minutes 
      (rmt:general-call area-dat 'update-run-duration run-id minutes test-id))
  (if (and uname hostname)
      (rmt:general-call area-dat 'update-uname-host run-id uname hostname test-id)))
  
;; This one is for running with no db access (i.e. via rmt: internally)
(define (tests:set-full-meta-info db area-dat test-id run-id minutes work-area remtries)
;; (define (tests:set-full-meta-info test-id run-id minutes work-area)
;;  (let ((remtries 10))
  (let* ((cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory)))
	 (uname    (get-uname "-srvpio"))
	 (hostname (get-host-name)))
    (tests:update-central-meta-info area-dat run-id test-id cpuload diskfree minutes uname hostname)))
    
;; (define (tests:set-partial-meta-info test-id run-id minutes work-area)
(define (tests:set-partial-meta-info test-id run-id minutes work-area remtries)
  (let* ((cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory)))
	 (remtries 10))
    (handle-exceptions
     exn
     (if (> remtries 0)
	 (begin
	   (print-call-chain (current-error-port))
	   (debug:print-info 0 *default-log-port* "WARNING: failed to set meta info. Will try " remtries " more times")
	   (set! remtries (- remtries 1))
	   (thread-sleep! 10)
	   (tests:set-full-meta-info db area-dat test-id run-id minutes work-area (- remtries 1)))
	 (let ((err-status ((condition-property-accessor 'sqlite3 'status #f) exn)))
	   (debug:print-error 0 *default-log-port* "tried for over a minute to update meta info and failed. Giving up")
	   (debug:print 0 *default-log-port* "EXCEPTION: database probably overloaded or unreadable.")
	   (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
	   (print "exn=" (condition->list exn))
	   (debug:print 0 *default-log-port* " status:  " ((condition-property-accessor 'sqlite3 'status) exn))
	   (print-call-chain (current-error-port))))