Megatest

;; This routine creates the db if not already present. It is only called if the db is not already opened
;;
(define (db:open-db dbstruct #!key (areapath #f)(do-sync #t)) ;; TODO: actually use areapath
  (let ((tmpdb-stack (dbr:dbstruct-dbstack dbstruct))) ;; RA => Returns the first reference in dbstruct
    (if (stack? tmpdb-stack)
	(db:get-db tmpdb-stack) ;; get previously opened db (will create new db handle if all in the stack are already used
        (let* ((max-stale-tmp (configf:lookup-number *configdat* "server" "filling-db-max-stale-seconds" default: 10))
               (dbpath       (db:dbfile-path ))      ;; path to tmp db area
               (dbexists     (common:file-exists? dbpath))
	       (tmpdbfname   (conc dbpath "/megatest.db"))
	       (dbfexists    (common:file-exists? tmpdbfname))  ;; (conc dbpath "/megatest.db")))
               (mtdbexists   (common:file-exists? (conc *toppath* "/megatest.db")))
							 
               (mtdbmodtime  (if mtdbexists (common:lazy-sqlite-db-modification-time (conc *toppath* "/megatest.db"))   #f))
	        		 (tmpdbmodtime (if dbfexists  (common:lazy-sqlite-db-modification-time tmpdbfname) #f)) 

          (dbr:dbstruct-tmpdb-set!  dbstruct tmpdb)
          (dbr:dbstruct-dbstack-set! dbstruct (make-stack)) ;; BB: why a stack?  Why would the number of db's be indeterminate?  Is this a legacy of 1.db 2.db .. ?
          (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb) ;; olddb is already a (cons db path)
          (dbr:dbstruct-refndb-set! dbstruct refndb)
          ;;	    (mutex-unlock! *rundb-mutex*)
          (if (and  (or (not dbfexists)
			(and modtimedelta
			     (> modtimedelta max-stale-tmp))) ;; if db in tmp is over ten seconds older than the file in MTRA then do a sync back
		    do-sync)
	      (begin
		(debug:print 1 *default-log-port* "filling db " (db:dbdat-get-path tmpdb) " with data \n    from " (db:dbdat-get-path mtdb) " mod time delta: " modtimedelta)
		(db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb refndb tmpdb)
    ;touch tmp db to avoid wal mode wierdness  
     (set! (file-modification-time tmpdbfname) (current-seconds))  
                (debug:print-info 13 *default-log-port* "db:sync-all-tables-list done.")

	 ;; kill servers
	 ((killservers)
	  (for-each
	   (lambda (server)
	     (match-let (((mod-time host port start-time pid) server))
	       (if (and host pid)
		   (tasks:kill-server host pid))))
	   servers)

          ;; /tmp/bjbarcla/megatest_localdb/fullrun/.nfs.pdx.disks.icf_env_disk001.bjbarcla.gwa.issues.mtdev.matt-bisect.megatest.ext-tests.runs.all.v1.65.1.6524.dev.bb-24-justrollup-f8.rollup.fullrun/megatest.db.lock
          (delete-file* (common:get-sync-lock-filepath))
          )
	 
	 ;; clear out junk records
	 ;;
	 ((dejunk)
	  (db:delay-if-busy mtdb) ;; ok to delay on mtdb
	  (db:clean-up mtdb)
	  (db:clean-up tmpdb)

			user (conc newlockval " " run-id))
       (debug:print-info 1 *default-log-port* "" newlockval " run number " run-id)))))

(define (db:set-run-status dbstruct run-id status msg)
  (db:with-db
   dbstruct #f #f
   (lambda (db)
       (if msg
         (sqlite3:execute db "UPDATE runs SET status=?,comment=? WHERE id=?;" status msg run-id)
         (sqlite3:execute db "UPDATE runs SET status=? WHERE id=?;" status run-id)))))

(define (db:set-run-state-status dbstruct run-id state status )
  (db:with-db
   dbstruct #f #f
   (lambda (db)
          (sqlite3:execute db "UPDATE runs SET status=?,state=? WHERE id=?;" status state run-id))))



(define (db:get-run-status dbstruct run-id)
  (let ((res "n/a"))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (sqlite3:for-each-row 
	(lambda (status)
	  (set! res status))
	db
	"SELECT status FROM runs WHERE id=?;" 
	run-id)
       res))))

(define (db:get-run-state dbstruct run-id)
  (let ((res "n/a"))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (sqlite3:for-each-row 
	(lambda (status)
	  (set! res status))
	db
	"SELECT state FROM runs WHERE id=?;" 
	run-id)
       res))))


;;======================================================================
;; K E Y S
;;======================================================================

;; get key val pairs for a given run-id
;; ( (FIELDNAME1 keyval1) (FIELDNAME2 keyval2) ... )

   run-id
   #f
   (lambda (db)
     (sqlite3:first-result
      db
      "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? AND NOT (uname = 'n/a' AND item_path = '') AND testname=?;" run-id testname))))


(define (db:get-not-completed-cnt dbstruct run-id)
(db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
      ;(print "SELECT count(id) FROM tests WHERE state not in ('COMPLETED', 'DELETED') AND run_id=" run-id)  
     (sqlite3:first-result
      db
      "SELECT count(id) FROM tests WHERE state not in ('COMPLETED', 'DELETED') AND run_id=?;" run-id))))

(define (db:get-count-tests-running-in-jobgroup dbstruct run-id jobgroup)
  (if (not jobgroup)
      0 ;; 
      (let ((testnames '()))
	;; get the testnames
	(db:with-db
	 dbstruct #f #f

;; status is the priority rollup of all completed statesfu
;;
;; if test-name is an integer work off that instead of test-name test-path
;;
(define (db:set-state-status-and-roll-up-items dbstruct run-id test-name item-path state status comment)
  ;; establish info on incoming test followed by info on top level test
  ;; BBnote - for mode itemwait, linkage between upstream test & matching item status is propagated to run queue in db:prereqs-not-met

  (let* ((testdat      (if (number? test-name)
			   (db:get-test-info-by-id dbstruct run-id test-name) ;; test-name is actually a test-id
			   (db:get-test-info       dbstruct run-id test-name item-path)))
	 (test-id      (db:test-get-id testdat))
	 (test-name    (if (number? test-name)
			   (db:test-get-testname testdat)
			   test-name))

              (sqlite3:with-transaction
               db
               (lambda ()
                 ;; NB// Pass the db so it is part fo the transaction
                 (db:test-set-state-status db run-id test-id state status comment) ;; this call sets the item state/status
                 (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
                     (let* ((state-status-counts  (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path state status)) ;; item-path is used to exclude current state/status of THIS test
			      						  (state-stauses (db:roll-up-rules state-status-counts state status))
                          (newstate (car state-stauses))
                          (newstatus (cadr state-stauses)))
                       (debug:print 4 *default-log-port* "BB> tl-test-id="tl-test-id" ; "test-name":"item-path" newstate="newstate" newstatus="newstatus" len(sscs)="(length state-status-counts)  " state-status-counts: "
							(apply conc
                  (map (lambda (x)
                     (conc
                     		(with-output-to-string (lambda () (pp (dbr:counts->alist x)))) " | "))
                              state-status-counts))); end debug:print
   
                       (if tl-test-id
			   (db:test-set-state-status db run-id tl-test-id newstate newstatus #f)) ;; we are still in the transaction - must access the db and not the dbstruct
		       ))))))
         (mutex-unlock! *db-transaction-mutex*)
         (if (and test-id state status (equal? status "AUTO")) 
             (db:test-data-rollup dbstruct run-id test-id status))
         tr-res)))))

(define (db:roll-up-rules state-status-counts state status)
		(let* ((running     (length (filter (lambda (x)
                          (member (dbr:counts-state x) *common:running-states*))
                                 state-status-counts)))
           (bad-not-started      (length (filter (lambda (x)
                                      (and (equal? (dbr:counts-state x) "NOT_STARTED") 
                                        (not (member (dbr:counts-status x)  *common:not-started-ok-statuses*))))

																	state-status-counts)))



           (all-curr-states      (common:special-sort  ;; worst -> best (sort of)
                                    (delete-duplicates
                                      (if (and state (not (member state *common:dont-roll-up-states*)))
                                          (cons state (map dbr:counts-state state-status-counts))
                                          (map dbr:counts-state state-status-counts)))
                                                  *common:std-states* >))
           (all-curr-statuses    (common:special-sort  ;; worst -> best
                                    (delete-duplicates
                                      (if (and state status (not (member state *common:dont-roll-up-states*)))
                                          (cons status (map dbr:counts-status state-status-counts))
                                          (map dbr:counts-status state-status-counts)))
                                                   *common:std-statuses* >))
           (non-completes        (filter (lambda (x)
							 										 (not (member x (cons "COMPLETED" *common:dont-roll-up-states*))))
						       									all-curr-states))
			     (preq-fails        (filter (lambda (x)
							 								(equal? x "PREQ_FAIL"))
						       							all-curr-statuses))
           (num-non-completes (length non-completes))
 					 (newstate          (cond
															((> running 0)           "RUNNING")            ;; anything running, call the situation running
                              ((> (length preq-fails) 0) "NOT_STARTED")

															((> bad-not-started 0)   "COMPLETED")          ;; we have an ugly situation, it is completed in the sense we cannot do more.
															((> num-non-completes 0) (car non-completes))  ;;  (remove (lambda (x)(equal? "COMPLETED" x)) all-curr-states))) ;; only rollup DELETED if all DELETED
															(else                    (car all-curr-states))))





           (newstatus         (cond
                              ((> (length preq-fails) 0)  "PREQ_FAIL")

                              ((or (> bad-not-started 0)
                                   (and (equal? newstate "NOT_STARTED")
                                      (> num-non-completes 0)))
                                            "STARTED")

                              (else (car all-curr-statuses)))))

 					(debug:print-info 2 *default-log-port*
                                         "\n--> probe db:set-state-status-and-roll-up-items: "
                                         "\n--> state-status-counts: "(map dbr:counts->alist state-status-counts)
                                         "\n--> running:             "running
                                         "\n--> bad-not-started:     "bad-not-started
                                         "\n--> non-non-completes:   "num-non-completes
                                         "\n--> non-completes:       "non-completes
                                         "\n--> all-curr-states:     "all-curr-states
                                         "\n--> all-curr-statuses:     "all-curr-statuses
                                         "\n--> newstate              "newstate
                                         "\n--> newstatus            "newstatus
                                         "\n\n")



                        ;; NB// Pass the db so it is part of the transaction
         (list newstate newstatus)))

(define (db:set-state-status-and-roll-up-run dbstruct run-id curr-state curr-status)
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                   (let* ((state-status-counts  (db:get-all-state-status-counts-for-run dbstruct run-id))
													(state-stauses (db:roll-up-rules state-status-counts #f #f ))


                          (newstate (car state-stauses))
                          (newstatus (cadr state-stauses))) 
                    (if (or (not (eq? newstate curr-state)) (not (eq?  newstatus curr-status)))
                   (db:set-run-state-status dbstruct run-id newstate newstatus )))))))
         (mutex-unlock! *db-transaction-mutex*)


         tr-res))))


(define (db:get-all-state-status-counts-for-run dbstruct run-id)
 (let* ((test-count-recs (db:with-db
                                  dbstruct #f #f
                                  (lambda (db)
                                    (sqlite3:map-row
                                     (lambda (state status count)
                                        (make-dbr:counts state: state status: status count: count))
                                     db
                                     "SELECT state,status,count(id) FROM tests WHERE run_id=?  GROUP BY state,status;"
                                     run-id )))))
   test-count-recs))


;; BBnote: db:get-all-state-status-counts-for-test returns dbr:counts object aggregating state and status of items of a given test, *not including rollup state/status*
(define (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path item-state-in item-status-in)
  (let* ((test-info   (db:get-test-info dbstruct run-id test-name item-path))
         (item-state  (or item-state-in (db:test-get-state test-info))) 
         (item-status (or item-status-in (db:test-get-status test-info)))
         (other-items-count-recs (db:with-db
                                  dbstruct #f #f
                                  (lambda (db)
                                    (sqlite3:map-row

  (list '(update-run-duration     "UPDATE tests SET run_duration=? WHERE id=?;")

	;; TESTS
	'(register-test          "INSERT OR IGNORE INTO tests (run_id,testname,event_time,item_path,state,status) VALUES (?,?,strftime('%s','now'),?,'NOT_STARTED','n/a');")
	;; Test state and status
	'(set-test-state         "UPDATE tests SET state=?   WHERE id=?;")
	'(set-test-status        "UPDATE tests SET state=?   WHERE id=?;")
	'(state-status           "UPDATE tests SET state=?,status=? WHERE id=?;") ;; D/ONE
	'(state-status-msg       "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;") ;; DONE
	;; Test comment
	'(set-test-comment       "UPDATE tests SET comment=? WHERE id=?;")
	'(set-test-start-time    "UPDATE tests SET event_time=strftime('%s','now') WHERE id=?;") ;; DONE
	'(pass-fail-counts       "UPDATE tests SET pass_count=?,fail_count=? WHERE id=?;")
	;; test_data-pf-rollup is used to set a tests PASS/FAIL based on the pass/fail info from the steps
	'(test_data-pf-rollup    "UPDATE tests