# Copyright 2013-2015 Matthew Welland.
#
# This file is part of Megatest.
#
# Megatest is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# Megatest is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Megatest. If not, see <http://www.gnu.org/licenses/>.
help :
@echo You may need to do the following setup first:
@echo
@echo sudo apt-get install libreadline-dev
@echo sudo apt-get install libwebkitgtk-dev libfreetype6-dev libx11-dev libxpm-dev libxmu-dev \
libxft-dev libgtk2.0-dev libgl1-mesa-dev libglu1-mesa-dev libpangox-1.0-dev bison \
libwebkitgtk-3.0-dev
@echo -- nb// adding monodevelop gets more packages of which some might be needed...
@echo sudo apt-get install libmotif3
@echo
@echo Set up your PATH, setting it in the Makefile does not work as expected
@echo export PATH=$(PREFIX)/bin:\$$PATH
@echo
@echo For IUP set IUPBRANCH, currently $(IUPBRANCH)
@echo set IUPCONFIG, currently $(IUPCONFIG) - look in https://www.kiatoa.com/fossils/iuplib for .inc files
@echo You are using PREFIX=$(PREFIX)
@echo You are using PRODCHICKEN=$(PRODCHICKEN)
@echo You are using PROXY="$(PROXY)"
@echo If needed set PROXY to host.dom:port
@echo http_proxy=$(http_proxy)
@echo
@echo To make all do: make all
@echo make minimal: make nogui
@echo
@echo Note: If compiling on amd64 do CSC_OPTIONS=\'-C "-fPIC"\' make all IUPCONFIG=
FPIC=-C "-fPIC"
# Put the installation here
ifeq ($(PREFIX),)
PREFIX=$(PWD)/target
endif
ifeq ($(PRODCHICKEN),)
PRODCHICKEN=$(PREFIX)/prod-chicken/
endif
# Set this on the command line of your make call if needed: make PROXY=host.com:1234
PROXY=
# http://code.call-cc.org/dev-snapshots/2015/06/07/chicken-4.10.0rc1.tar.gz
# http://code.call-cc.org/releases/4.10.0/chicken-4.10.0.tar.gz
# Select version of chicken, sqlite3 etc
CHICKEN_VERSION=4.12.0rc2
SQLITE3_VERSION=3090200
# http://www.sqlite.org/2014/sqlite-autoconf-3080500.tar.gz
# http://www.sqlite.org/2015/sqlite-autoconf-3081101.tar.gz
# Override IUPBRANCH to use other than trunk
IUPBRANCH=trunk
IUPCONFIG=ubuntu-15.04.inc
# iup-3.15
# Eggs to install (straightforward ones)
EGGS=matchable readline apropos base64 regex-literals format regex-case test coops trace csv \
dot-locking posix-utils posix-extras directory-utils hostinfo tcp-server rpc csv-xml fmt \
json md5 awful http-client spiffy uri-common intarweb spiffy-request-vars \
spiffy-directory-listing ssax sxml-serializer sxml-modifications sql-de-lite \
srfi-19 refdb ini-file sparse-vectors z3 call-with-environment-variables hahn linenoise \
crypt parley
#
# Derived variables
#
ifeq ($(PROXY),)
PROX:=
else
http_proxy:=http://$(PROXY)
PROX:=-proxy $(PROXY)
endif
BUILDHOME=$(PWD)
PATH:=$(PREFIX)/bin:$(PATH)
LIBPATH=$(PREFIX)/lib$(ADDITIONAL_LIBPATH)
LD_LIBRARY_PATH=$(LIBPATH)
CHICKEN_INSTALL=$(PREFIX)/bin/chicken-install
CHICKEN_EGG_DIR=$(PREFIX)/lib/chicken/7
VPATH=$(CHICKEN_EGG_DIR):$(PWD)/eggflags
vpath %.so $(CHICKEN_EGG_DIR)
vpath %.flag eggflags
EGGSOFILES=$(addprefix $(CHICKEN_EGG_DIR)/,$(addsuffix .so,$(EGGS)))
EGGFLAGS=$(addprefix eggflags/,$(addsuffix .flag,$(EGGS)))
# Stuff needed for IUP
ISARCHX86_64=$(shell uname -a | grep x86_64)
ifeq ($(ISARCHX86_64),)
ARCHSIZE=
else
ARCHSIZE=64_
endif
CSCLIBS=$(shell echo $(LD_LIBRARY_PATH) | sed 's/:/ -L/g')
CSC_OPTIONS="-I$(PREFIX)/include -L$(CSCLIBS) -C \"-fPIC\""
# CSC_OPTIONS=-I $(PREFIX)/include -L $(CSCLIBS)
nogui : base mutils
#all : nogui libiup $(PREFIX)/lib/sqlite3.so
all : nogui libiup
base : chkn eggs
# stuff needed for Kiatoa and Megatest from matts miscellaneous stash
# NOTE TO SELF: eggifying these would be great...
mutils : base logprobin $(PREFIX)/bin/hs \
$(PREFIX)/lib/chicken/7/mutils.so \
$(PREFIX)/lib/chicken/7/dbi.so \
$(PREFIX)/lib/chicken/7/stml.so \
$(PREFIX)/lib/chicken/7/margs.so
chkn : $(CHICKEN_INSTALL)
eggs : $(EGGSOFILES)
# libiup : $(PREFIX)/lib/libavcall.a
libiup : $(CHICKEN_EGG_DIR)/iup.so $(CHICKEN_EGG_DIR)/canvas-draw.so
logprobin : $(PREFIX)/bin/logpro
$(PREFIX)/bin/logpro : $(CHICKEN_EGG_DIR)/regex-literals.so
$(CHICKEN_INSTALL) logpro
# Silly rule to make installing eggs more makeish, I don't understand why I need the basename
$(CHICKEN_EGG_DIR)/%.so : eggflags/%.flag
$(CHICKEN_INSTALL) $(PROX) -keep-installed $(shell basename $*)
$(EGGFLAGS) : # $(CHICKEN_INSTALL)
mkdir -p eggflags
touch $(EGGFLAGS)
# some setup stuff
#
$(PREFIX)/setup-chicken4x.sh : $(EGGFLAGS)
mkdir -p $(PREFIX)
(echo 'export PATH=$(PREFIX)/bin:$$PATH' > $(PREFIX)/setup-chicken4x.sh)
(echo "export LD_LIBRARY_PATH=$(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.sh)
$(PREFIX)/setup-chicken4x.csh : $(EGGFLAGS)
mkdir -p $(PREFIX)
(echo "setenv PATH $(PREFIX):'$$'PATH" > $(PREFIX)/setup-chicken4x.csh)
(echo "setenv LD_LIBRARY_PATH $(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.csh)
chicken-core/chicken.scm : chicken-$(CHICKEN_VERSION).tar.gz
#tar xf chicken-$(CHICKEN_VERSION).tar.gz
#ln -sf chicken-$(CHICKEN_VERSION) chicken-core
echo "Hello from chicken"
chicken-4.9.0rc1.tar.gz :
wget http://code.call-cc.org/dev-snapshots/2014/04/17/chicken-4.9.0rc1.tar.gz
chicken-4.9.0.1.tar.gz :
wget http://code.call-cc.org/releases/4.9.0/chicken-4.9.0.1.tar.gz
chicken-4.10.0rc1.tar.gz :
wget http://code.call-cc.org/dev-snapshots/2015/06/07/chicken-4.10.0rc1.tar.gz
chicken-4.10.0.tar.gz :
wget http://code.call-cc.org/releases/4.10.0/chicken-4.10.0.tar.gz
chicken-4.10.1.tar.gz :
fossil clone https://www.kiatoa.com/fossils/chicken-core chicken-scheme.fossil
mkdir -p chicken-core
cd chicken-core; pwd
cd chicken-core; fossil open ../chicken-scheme.fossil
cd chicken-core; fossil up 337f5be
# wget http://code.call-cc.org/dev-snapshots/2015/08/29/chicken-4.10.1.tar.gz
chicken-4.12.0rc2.tar.gz :
wget https://code.call-cc.org/dev-snapshots/2017/02/06/chicken-4.12.0rc2.tar.gz
# git clone git://code.call-cc.org/chicken-core
# git clone http://code.call-cc.org/git/chicken-core.git
$(PRODCHICKEN)/bin/chicken :
wget http://code.call-cc.org/dev-snapshots/2015/08/29/chicken-4.10.1.tar.gz
tar -xzvf chicken-4.10.1.tar.gz
cd chicken-4.10.1/; make PLATFORM=linux PREFIX=$(PRODCHICKEN)
cd chicken-4.10.1/; make PLATFORM=linux PREFIX=$(PRODCHICKEN) install
rm -rfv chicken-4.10.1/
$(CHICKEN_INSTALL) : chicken-core/chicken.scm $(PREFIX)/setup-chicken4x.sh $(PREFIX)/setup-chicken4x.csh $(PRODCHICKEN)/bin/chicken
cd chicken-core; LD_LIBRARY_PATH=$(PRODCHICKEN) make PLATFORM=linux CHICKEN=$(PRODCHICKEN)/bin/chicken PREFIX=$(PREFIX)
cd chicken-core; LD_LIBRARY_PATH=$(PRODCHICKEN) make PLATFORM=linux CHICKEN=$(PRODCHICKEN)/bin/chicken PREFIX=$(PREFIX) install
#======================================================================
# S Q L I T E 3
#======================================================================
# https://www.sqlite.org/2015/sqlite-autoconf-3090200.tar.gz
sqlite-autoconf-$(SQLITE3_VERSION).tar.gz :
wget http://www.sqlite.org/2015/sqlite-autoconf-$(SQLITE3_VERSION).tar.gz
sqlite-autoconf-$(SQLITE3_VERSION)/config.log : sqlite-autoconf-$(SQLITE3_VERSION).tar.gz
tar xf sqlite-autoconf-$(SQLITE3_VERSION).tar.gz
$(PREFIX)/bin/sqlite3 : sqlite-autoconf-$(SQLITE3_VERSION)/config.log
cd sqlite-autoconf-$(SQLITE3_VERSION);./configure --prefix=$(PREFIX);make;make install
$(CHICKEN_EGG_DIR)/sqlite3.so : $(PREFIX)/bin/sqlite3
CSC_OPTIONS="-I$(PREFIX)/include -L$(PREFIX)/lib" $(CHICKEN_INSTALL) $(PROX) sqlite3
#======================================================================
# N A N O M S G
#======================================================================
# https://github.com/nanomsg/nanomsg/releases/download/0.6-beta/nanomsg-0.6-beta.tar.gz
# https://github.com/nanomsg/nanomsg/releases/download/0.8-beta/nanomsg-0.8-beta.tar.gz
# nanomsg-0.6-beta.tar.gz :
# wget http://download.nanomsg.org/nanomsg-0.6-beta.tar.gz
# nanomsg-0.6-beta/COPYING : nanomsg-0.6-beta.tar.gz
# tar xf nanomsg-0.6-beta.tar.gz
# $(PREFIX)/bin/nanocat : nanomsg-0.6-beta/COPYING
# cd nanomsg-0.6-beta;./configure --prefix=$(PREFIX);make;make install
# $(PREFIX)/lib/nanomsg.so : $(PREFIX)/bin/nanocat
# CSC_OPTIONS="-I$(PREFIX)/include -L$(PREFIX)/lib" $(CHICKEN_INSTALL) $(PROX) nanomsg
# # LD_LIBRARY_PATH=/mfs/pkgs/chicken/4.10.0-amd64/lib CSC_OPTIONS="-I/mfs/pkgs/chicken/4.10.0-amd64/include -L/mfs/pkgs/chicken/4.10.0-amd64/lib -C \"-fPIC\"" /mfs/pkgs/chicken/4.10.0-amd64/bin/chicken-install -D no-library-checks nanomsg
#======================================================================
# M A T T S U T I L S
#======================================================================
# opensrc
opensrc.fossil :
fossil clone http://www.kiatoa.com/fossils/opensrc opensrc.fossil
opensrc/histstore/histstore.scm : opensrc.fossil
mkdir -p opensrc
cd opensrc;if [ -e .fslckout ];then fossil update; else fossil open ../opensrc.fossil; fi
$(PREFIX)/lib/chicken/7/mutils.so : opensrc/histstore/histstore.scm
cd opensrc/mutils;chicken-install
$(PREFIX)/lib/chicken/7/dbi.so : opensrc/dbi/dbi.scm
cd opensrc/dbi; sed -i -e 's/.*postgres.*/;;commented out/g' dbi.scm; chicken-install
$(PREFIX)/lib/chicken/7/margs.so : opensrc/margs/margs.scm
cd opensrc/margs;chicken-install
opensrc/histstore/hs : opensrc/histstore/histstore.scm chkn eggs $(CHICKEN_EGG_DIR)/sqlite3.so
cd opensrc/histstore;$(PREFIX)/bin/csc histstore.scm -o hs
$(PREFIX)/bin/hs : opensrc/histstore/hs
cp -f opensrc/histstore/hs $(PREFIX)/bin/hs
# stml
stml.fossil :
fossil clone http://www.kiatoa.com/fossils/stml stml.fossil
# open touches the .fossil :(
stml/requirements.scm.template : stml.fossil
mkdir -p stml
cd stml;if [ -e .fslckout ];then fossil update; else fossil open ../stml.fossil;fi
stml/requirements.scm : stml/requirements.scm.template
cp stml/install.cfg.template stml/install.cfg
cp stml/requirements.scm.template stml/requirements.scm
$(PREFIX)/lib/chicken/7/stml.so : stml/requirements.scm
cd stml; sed -i -e "s#.*TARGDIR.*#TARGDIR=$(PREFIX)/bin#g" install.cfg
cd stml;CSC_OPTIONS='-C "-fPIC"' make
#======================================================================
# F F C A L L (Used by IUP)
#======================================================================
ffcall.fossil :
fossil clone http://www.kiatoa.com/fossils/ffcall ffcall.fossil
ffcall/README : ffcall.fossil
mkdir -p ffcall
cd ffcall && if [ -e README ];then fossil update; else fossil open ../ffcall.fossil; fi
# NOTE: This worked fine *without* the enable-shared
#
$(PREFIX)/lib/libavcall.a : ffcall/README
cd ffcall;./configure --prefix=$(PREFIX) --enable-shared && make CC="gcc -fPIC" && make install
#======================================================================
# I U P
#======================================================================
iuplib.fossil :
#fossil clone http://www.kiatoa.com/fossils/iuplib iuplib.fossil
touch iuplib.fossil
iup/installall.sh : iuplib.fossil $(PREFIX)/lib/libiup.so
mkdir -p iup
pwd
wget -c --no-check-certificate http://sourceforge.net/projects/canvasdraw/files/5.9/Linux%20Libraries/cd-5.9_Linux26g4_64_lib.tar.gz/download
wget -c --no-check-certificate http://sourceforge.net/projects/iup/files/3.17/Linux%20Libraries/iup-3.17_Linux26g4_64_lib.tar.gz/download
wget -c --no-check-certificate http://sourceforge.net/projects/imtoolkit/files/3.10/Linux%20Libraries/im-3.10_Linux26g4_64_lib.tar.gz/download
#wget -c http://sourceforge.net/projects/luabinaries/files/5.3.2/Linux%20Libraries/lua-5.3.2_Linux26g4_64_lib.tar.gz/download
tar -xzvf cd-5.9_Linux26g4_64_lib.tar.gz -C iup/
tar -xzvf im-3.10_Linux26g4_64_lib.tar.gz -C iup/
tar -xzvf iup-3.17_Linux26g4_64_lib.tar.gz -C iup/
mkdir -p $(PREFIX)/include/ $(PREFIX)/lib/
cp iup/include/* $(PREFIX)/include/
cp iup/*.so $(PREFIX)/lib/
cp iup/*.a $(PREFIX)/lib/
# cd iup && if [ -e makeall.sh ];then fossil update $(IUPBRANCH); else fossil open ../iuplib.fossil;fossil update $(IUPBRANCH); fi
#iup/alldone : iup/makeall.sh $(PREFIX)/include/iup.h $(PREFIX)/lib/libiup.so
# cd iup && ./makeall.sh $(IUPCONFIG)
$(PREFIX)/lib/libiup.so $(PREFIX)/include/iup.h : iup/installall.sh
# cd iup && ./makeall.sh $(IUPCONFIG)
# $(PREFIX)/lib/libiup.so : iup/iup/alldone
# touch -c $(PREFIX)/lib/libiup.so
$(CHICKEN_EGG_DIR)/iup.so : $(PREFIX)/lib/libiup.so $(PREFIX)/lib/libavcall.a
LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks -feature disable-iup-web iup
# -feature disable-iup-web
$(CHICKEN_EGG_DIR)/canvas-draw.so : $(PREFIX)/lib/libiup.so $(PREFIX)/lib/libavcall.a
CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks canvas-draw
clean :
rm -rf chicken-4.8.0 eggflags ffcall sqlite-autoconf-$(SQLITE3_VERSION)