;;======================================================================
;; Copyright 2017, Matthew Welland.
;;
;; This file is part of Megatest.
;;
;; Megatest is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation, either version 3 of the License, or
;; (at your option) any later version.
;;
;; Megatest is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with Megatest. If not, see <http://www.gnu.org/licenses/>.
;;======================================================================
(declare (unit rmtmod))
(declare (uses debugprint))
(declare (uses commonmod))
(declare (uses dbfile)) ;; needed for records
;; (declare (uses apimod))
;; (declare (uses apimod.import))
;; (declare (uses ulex))
;; (include "ulex/ulex.scm")
(module rmtmod
*
(import scheme chicken data-structures extras matchable srfi-69)
(import (prefix sqlite3 sqlite3:) posix typed-records srfi-18)
(import commonmod dbfile debugprint) ;; (prefix commonmod cmod:))
;; (import apimod)
;; (import (prefix ulex ulex:))
(include "db_records.scm")
(defstruct alldat
(areapath #f)
(ulexdat #f)
)
;; hold the send-receive proc in this parameter
(define rmtmod:send-receive #f) ;; (make-parameter #f))
;;======================================================================
;; M I S C
;;======================================================================
;; hand off a call to one of the db:queries statements
;; added run-id to make looking up the correct db possible
;;
(define (rmt:general-call stmtname run-id . params)
(rmtmod:send-receive 'general-call run-id (append (list stmtname run-id) params)))
;;======================================================================
;; import an sexpr file into the db
;;======================================================================
(define (rmt:import-sexpr sexpr-file)
(if (file-exists? sexpr-file)
(let* ((data (with-input-from-file sexpr-file read)))
(for-each
(lambda (targ-dat)
(rmt:import-target targ-dat)) ;; ("target" ("run1" ("data" (1 ("field" . "value") ...
data))
(let* ((msg (conc "ERROR: file "sexpr-file" not found")))
(debug:print 0 *default-log-port* msg)
(cons #f msg))))
(define (rmt:import-target targ-dat)
(let* ((target (car targ-dat))
(data (cdr targ-dat)))
(for-each
(lambda (run-dat)
(rmt:import-run target run-dat)) ;; ("runname" ("data" ("testid" ("field" . "value") ...
data)))
(define (rmt:import-run target run-dat)
(let* ((runname (car run-dat))
(all-dat (cdr run-dat))
(tests-data (alist-ref "data" all-dat equal?))
(run-meta (alist-ref "meta" all-dat equal?))
(run-id (string->number (alist-ref "id" run-meta equal?))))
(rmt:insert-run run-id target runname run-meta)
(for-each
(lambda (test-dat)
(let* ((test-id (car test-dat))
(test-rec (cdr test-dat)))
(rmt:insert-test run-id test-rec)))
tests-data)))
;; insert run if not there, return id either way
(define (rmt:insert-run run-id target runname run-meta)
;; look for id, return if found
(debug:print 0 *default-log-port* "Insert run: "target"/"runname)
(let* ((runs (rmtmod:send-receive 'simple-get-runs #f
;; runpatt count offset target last-update)
(list runname #f #f target #f))))
(if (null? runs)
(begin
(debug:print 0 *default-log-port* "inserting run for runname " runname " target " target)
(rmtmod:send-receive 'insert-run #f (list run-id target runname run-meta))
)
(begin
(debug:print 0 *default-log-port* "Found run-id " (simple-run-id (car runs)) " for runname " runname " target " target)
(simple-run-id (car runs)
)
))))
(define (rmt:insert-test run-id test-rec)
(let* ((testname (alist-ref "testname" test-rec equal?))
(item-path (alist-ref "item_path" test-rec equal?)))
(rmtmod:send-receive 'insert-test run-id test-rec)))
;;======================================================================
;; T E S T S
;;======================================================================
;; Just some syntatic sugar
(define (rmt:register-test run-id test-name item-path)
(assert (number? run-id) "FATAL: Run id required.")
(rmt:general-call 'register-test run-id run-id test-name item-path))
(define (rmt:get-test-id run-id testname item-path)
(assert (number? run-id) "FATAL: Run id required.")
(rmtmod:send-receive 'get-test-id run-id (list run-id testname item-path)))
(define (rmt:get-test-info-by-id run-id test-id)
(if (number? test-id)
(rmtmod:send-receive 'get-test-info-by-id run-id (list run-id test-id))
(begin
(debug:print 0 *default-log-port* "WARNING: Bad data handed to rmt:get-test-info-by-id run-id=" run-id ", test-id=" test-id)
(print-call-chain (current-error-port))
#f)))
(define (rmt:get-test-state-status-by-id run-id test-id)
(rmtmod:send-receive 'get-test-state-status-by-id run-id (list run-id test-id)))
(define (rmt:test-get-rundir-from-test-id run-id test-id)
(rmtmod:send-receive 'test-get-rundir-from-test-id run-id (list run-id test-id)))
;; (define (rmt:open-test-db-by-test-id run-id test-id #!key (work-area #f))
;; (assert (number? run-id) "FATAL: Run id required.")
;; (let* ((test-path (if (string? work-area)
;; work-area
;; (rmt:test-get-rundir-from-test-id run-id test-id))))
;; (debug:print 3 *default-log-port* "TEST PATH: " test-path)
;; (open-test-db test-path)))
;; WARNING: This currently bypasses the transaction wrapped writes system
(define (rmt:test-set-state-status-by-id run-id test-id newstate newstatus newcomment)
(assert (number? run-id) "FATAL: Run id required.")
(rmtmod:send-receive 'test-set-state-status-by-id run-id (list run-id test-id newstate newstatus newcomment)))
(define (rmt:set-tests-state-status run-id testnames currstate currstatus newstate newstatus)
(assert (number? run-id) "FATAL: Run id required.")
(rmtmod:send-receive 'set-tests-state-status run-id (list run-id testnames currstate currstatus newstate newstatus)))
(define (rmt:get-tests-for-run run-id testpatt states statuses offset limit not-in sort-by sort-order qryvals last-update mode)
(assert (number? run-id) "FATAL: Run id required.")
;; (if (number? run-id)
(rmtmod:send-receive 'get-tests-for-run run-id (list run-id testpatt states statuses offset limit not-in sort-by sort-order qryvals last-update mode)))
;; (begin
;; (debug:print-error 0 *default-log-port* "rmt:get-tests-for-run called with bad run-id=" run-id)
;; (print-call-chain (current-error-port))
;; '())))
(define (rmt:get-tests-for-run-state-status run-id testpatt last-update)
(assert (number? run-id) "FATAL: Run id required.")
(rmtmod:send-receive 'get-tests-for-run-state-status run-id (list run-id testpatt last-update)))
;; get stuff via synchash
(define (rmt:synchash-get run-id proc synckey keynum params)
(assert (number? run-id) "FATAL: Run id required.")
(rmtmod:send-receive 'synchash-get run-id (list run-id proc synckey keynum params)))
(define (rmt:get-tests-for-run-mindata run-id testpatt states status not-in)
(assert (number? run-id) "FATAL: Run id required.")
(rmtmod:send-receive 'get-tests-for-run-mindata run-id (list run-id testpatt states status not-in)))
;; state and status are extra hints not usually used in the calculation
;;
(define (rmt:set-state-status-and-roll-up-items run-id test-name item-path state status comment)
(assert (number? run-id) "FATAL: Run id required.")
(rmtmod:send-receive 'set-state-status-and-roll-up-items run-id (list run-id test-name item-path state status comment)))
;;======================================================================
;; Maintenance
;;======================================================================
(define (rmt:get-toplevels-and-incompletes run-id running-deadtime remotehoststart-deadtime)
(rmtmod:send-receive 'get-toplevels-and-incompletes run-id (list run-id running-deadtime remotehoststart-deadtime)))
(define (rmt:get-status-from-final-status-file run-dir)
(let ((infile (conc run-dir "/.final-status")))
;; first verify we are able to write the output file
(if (not (file-read-access? infile))
(begin
(debug:print 2 *default-log-port* "ERROR: cannot read " infile)
(debug:print 2 *default-log-port* "ERROR: run-dir is " run-dir)
#f
)
(with-input-from-file infile read-lines)
)))
;; select end_time-now from
;; (select testname,item_path,event_time+run_duration as
;; end_time,strftime('%s','now') as now from tests where state in
;; ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));
;;
;; NOT EASY TO MIGRATE TO db{file,mod}
;;
(define (rmt:find-and-mark-incomplete-engine run-id ovr-deadtime cfg-deadtime test-stats-update-period)
(let* ((incompleted '())
(oldlaunched '())
(toplevels '())
;; The default running-deadtime is 720 seconds = 12 minutes.
;; "(running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))" = 200 + (2 * (200 + 30 + 30))
(deadtime-trim (or ovr-deadtime cfg-deadtime))
(server-start-allowance 200)
(server-overloaded-budget 200)
(launch-monitor-off-time (or test-stats-update-period 30))
(launch-monitor-on-time-budget 30)
(launch-monitor-period (+ launch-monitor-off-time launch-monitor-on-time-budget server-overloaded-budget))
(remotehoststart-deadtime-default (+ server-start-allowance server-overloaded-budget 30))
(remotehoststart-deadtime (or deadtime-trim remotehoststart-deadtime-default))
(running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))
(running-deadtime (or deadtime-trim running-deadtime-default))) ;; two minutes (30 seconds between updates, this leaves 3x grace period)
(debug:print-info 4 *default-log-port* "running-deadtime = " running-deadtime)
(debug:print-info 4 *default-log-port* "deadtime-trim = " deadtime-trim)
(let* ((dat (rmt:get-toplevels-and-incompletes run-id running-deadtime remotehoststart-deadtime)))
(set! oldlaunched (list-ref dat 1))
(set! toplevels (list-ref dat 2))
(set! incompleted (list-ref dat 0)))
(debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, "
(length toplevels) " old LAUNCHED toplevel tests and "
(length incompleted) " tests marked RUNNING but apparently dead.")
;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
;;
;; (db:delay-if-busy dbdat)
(let* ((min-incompleted-ids (map car incompleted)) ;; do 'em all
(all-ids (append min-incompleted-ids (map car oldlaunched))))
(if (> (length all-ids) 0)
(begin
;; (launch:is-test-alive "localhost" 435)
(debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ")
" as DEAD")
(for-each
(lambda (test-id)
(let* ((tinfo (rmt:get-test-info-by-id run-id test-id))
(run-dir (db:test-get-rundir tinfo))
(host (db:test-get-host tinfo))
(pid (db:test-get-process_id tinfo))
(result (rmt:get-status-from-final-status-file run-dir)))
(if (and (list? result) (> (length result) 1) (equal? "PASS" (cadr result)) (equal? "COMPLETED" (car result)))
(begin
(debug:print 0 *default-log-port* "INFO: test " test-id " actually passed, so marking PASS not DEAD")
(rmt:set-state-status-and-roll-up-items
run-id test-id 'foo "COMPLETED" "PASS"
"Test stopped responding but it has PASSED; marking it PASS in the DB."))
(let ((is-alive (and (not (eq? pid 0)) ;; 0 is default in re-used field "attemptnum" where pid stored.
(commonmod:is-test-alive host pid))))
(if is-alive
(debug:print 0 *default-log-port* "INFO: test " test-id " on host " host
" has a process on pid " pid ", NOT setting to DEAD.")
(begin
(debug:print 0 *default-log-port* "INFO: test " test-id
" final state/status is not COMPLETED/PASS. It is " result)
(rmt:set-state-status-and-roll-up-items
run-id test-id 'foo "COMPLETED" "DEAD"
"Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")))))))
;; call end of eud of run detection for posthook - from merge, is it needed?
;; (launch:end-of-run-check run-id)
all-ids)
)))))
)