Megatest

	(debug:print-error 0 *default-log-port* "command \"/bin/readlink -f " path "\" failed. exn=" exn)
	path) ;; just give up
    (with-input-from-pipe
	(conc "/bin/readlink -f " path)
      (lambda ()
	(read-line)))))

;; returns *effective load* (not normalized)
;;
(define (common:get-intercept onemin fivemin)
  (if (< onemin fivemin) ;; load is decreasing, just use the onemin load
      onemin
      (let* ((load-change (- onemin fivemin))
	     (tchange     (- 300 60)))
	(max (+ onemin (* 60 (/ load-change tchange))) 0))))

;; calculate a delay number based on a droop curve
;;    inputs are:
;;      - load-in, load as from uptime, NOT normalized
;;      - numcpus, number of cpus, ideally use the real cpus, not threads
;;
(define (common:get-delay load-in numcpus)
  (max (/ (expt 5 (* 4 (/ load-in numcpus))) 10) 0))



(define (get-cpu-load #!key (remote-host #f))
  (car (common:get-cpu-load remote-host)))
;;   (let* ((load-res (process:cmd-run->list "uptime"))
;; 	 (load-rx  (regexp "load average:\\s+(\\d+)"))
;; 	 (cpu-load #f))

	      (if new-best
		  (begin ;; found a host, return it
		    (debug:print 0 *default-log-port* "INFO: Found host: " new-best " load: " load " last-used: " delta " seconds ago, with job-rate: " job-rate)
		    (host-last-used-set! rec curr-time)
		    new-best)
		  (if (null? tal) #f (loop (car tal)(cdr tal) best-host)))))))))

(define (common:wait-for-homehost-load maxnormload msg)
  (let* ((hh-dat (if (common:on-homehost?) ;; if we are on the homehost then pass in #f so the calls are local.
                     #f
                     (common:get-homehost)))
         (hh     (if hh-dat (car hh-dat) #f)))
    (common:wait-for-normalized-load maxnormload msg hh)))

(define (common:get-num-cpus remote-host)
  (let* ((actual-host (or remote-host (get-host-name))))
    (or (common:get-cached-info actual-host "num-cpus" age: (+ 2592000 (random 3600))) ;; hosts had better not be changing the number of cpus too often!
	(let* ((proc   (lambda ()
			 (let loop ((numcpu 0)
				    (inl    (read-line)))

	  (if (and (number? result)
		   (> result 0))
	      (common:write-cached-info actual-host "num-cpus" result))
	  result))))

;; wait for normalized cpu load to drop below maxload
;;
(define (common:wait-for-normalized-load maxnormload msg remote-host #!optional (rem-tries 5))
  (let ((num-cpus (common:get-num-cpus remote-host)))
    (if num-cpus
	(common:wait-for-cpuload maxnormload num-cpus 15 msg: msg remote-host: remote-host)
	(begin
	  (thread-sleep! (random 60)) ;; we failed to get num cpus. wait a bit and try again
	  (if (> rem-tries 0)
	      (common:wait-for-normalized-load maxnormload msg remote-host (- rem-tries 1))
	      #f)))))

;; DO NOT CALL THIS DIRECTLY. It is called from common:wait-for-normalized-load
;;   count     - count down to zero, at some point we'd give up if the load never drops
;;   num-tries - count down to zero number tries to get numcpus
;;
(define (common:wait-for-cpuload maxnormload numcpus-in
				 #!key (count 1000)
				 (msg #f)(remote-host #f)(num-tries 5))
  (let* ((loadavg     (common:get-cpu-load remote-host))
	  ;; not possible to have zero.  If we get 1, it's possible that we got the previous default, and we should check again
	 (numcpus     (if (<= 1 numcpus-in)
			  (common:get-num-cpus remote-host)
			  numcpus-in))





	 (first       (car loadavg))
	 (next        (cadr loadavg))
	 (adjmaxload  (* maxnormload (max 1 numcpus))) ;; possible bug
						   ;; where numcpus
						   ;; (or could be
						   ;; maxload) is
						   ;; zero, crude
						   ;; fallback is to
						   ;; at least use 1



	 ;; effective load accounts for load jumps, this should elminate all the first-next-avg, adjwait, load-jump-limit




	 ;; etc.
	 (effective-load    (common:get-intercept first next))



	 (recommended-delay (common:get-delay effective-load numcpus))
	 (effective-host    (or remote-host "localhost"))
	 (normalized-effective-load (/ effective-load numcpus))
	 (will-wait                 (> normalized-effective-load maxnormload)))
    (if (> recommended-delay 0)
	(let* ((actual-delay (min recommended-delay 30)))
	  (debug:print-info 0 *default-log-port* "Load is high, delaying " actual-delay " seconds.")
	  (thread-sleep! actual-delay)))
    
    (cond
     ;; bad data, try again to get the data
     ((not will-wait)
      (if (common:low-noise-print 30 (conc (round normalized-effective-load) "-load-acceptable-" effective-host))
	  (debug:print 0 *default-log-port* "Effective load on " effective-host " is acceptable at " effective-load " continuing.")))
     ((and (< first 0) ;; this indicates the loadavg data is bad - machine may not be reachable
	   (> num-tries 0))
      (debug:print 0 *default-log-port* "WARNING: received bad data from get-cpu-load "
		   first ", we'll sleep 10s and try " num-tries " more times.")
      (thread-sleep! 10)
      (common:wait-for-cpuload maxnormload numcpus-in
			       count: count remote-host: remote-host num-tries: (- num-tries 1)))
     ;; need to wait for load to drop
     ((and will-wait ;; (> first adjmaxload)
	   (> count 0))
      (debug:print-info 0 *default-log-port*
			"Delaying 15" ;; adjwait
			" seconds due to normalized effective load " normalized-effective-load ;; first
			" exceeding max of " adjmaxload
			" on server " (or remote-host (get-host-name))
			" (normalized load-limit: " maxnormload ") " (if msg msg ""))
      (thread-sleep! 15) ;; adjwait)
      (common:wait-for-cpuload maxnormload numcpus count: (- count 1) msg: msg remote-host: remote-host)
      ;; put the message here to indicate came out of waiting
      (debug:print-info 1 *default-log-port*
			"On host: " effective-host
			", effective load: " effective-load

			", numcpus: " numcpus

			", normalized effective load: " normalized-effective-load
			))
     ;; overloaded and count expired (i.e. went to zero)




     (else
      (if (> num-tries 0) ;; should be "num-tries-left". 
	  (if (common:low-noise-print 30 (conc (round effective-load) "-load-acceptable-" effective-host))
	      (debug:print 0 *default-log-port* "Load on " effective-host " is acceptable at effective normalized load of "
			   effective-normalized-load "  continuing."))
	  (debug:print 0 *default-log-port* "Load on " effective-host ", "
		       first" could not be retrieved. Giving up and continuing."))))))

;; DO NOT CALL THIS DIRECTLY. It is called from common:wait-for-normalized-load
;;
;; (define (common:wait-for-cpuload maxload-in numcpus-in waitdelay #!key (count 1000) (msg #f)(remote-host #f)(force-maxload #f)(num-tries 5))
;;   (let* ((loadavg (common:get-cpu-load remote-host))
;; 	 (numcpus (if (<= 1 numcpus-in) ;; not possible to have zero.  If we get 1, it's possible that we got the previous default, and we should check again
;; 		      (common:get-num-cpus remote-host)
;; 		      numcpus-in))
;; 	 (maxload (if force-maxload
;; 		      maxload-in
;; 		      (if (number? maxload-in)
;; 			  (max maxload-in 0.5)
;; 			  0.5))) ;; so maxload must be greater than 0.5 for now BUG - FIXME?
;; 	 (first   (car loadavg))
;; 	 (next    (cadr loadavg))
;; 	 (adjmaxload (* maxload (max 1 numcpus))) ;; possible bug where
;; 					       ;; numcpus (or could be
;; 					       ;; maxload) is zero,
;; 					       ;; crude fallback is to
;; 					       ;; at least use 1
;; 	 (loadjmp (- first (if (> next (* numcpus 0.7)) ;; could do something with average of first and next?
;; 			       0
;; 			       next))) ;; we will force a conservative calculation any time next is large.
;; 	 (first-next-avg    (/ (+ first next) 2))
;; 	 ;; add some randomness to the time to break any alignment
;; 	 ;; where netbatch dumps many jobs to machines simultaneously
;;          (adjwait           (min (+ 300 (random 10)) (abs (* (+ (random 10)
;; 								(/ (- 1000 count) 10)
;; 								waitdelay)
;; 							     (- first adjmaxload) ))))
;; 	 (load-jump-limit   (configf:lookup-number *configdat* "setup" "load-jump-limit"))
;; 	 ;; effective load accounts for load jumps, this should elminate all the first-next-avg, adjwait, load-jump-limit
;; 	 ;; etc.
;; 	 (effective-load    (common:get-intercept first next))
;; 	 (effective-host    (or remote-host "localhost"))
;; 	 (normalized-effective-load (/ effective-load numcpus))
;; 	 (will-wait                 (> normalized-effective-load maxload)))
;; 	 
;;     ;; let's let the user know once in a long while that load checking
;;     ;; is happening but not constantly report it
;;     #;(if (common:low-noise-print 30 (conc "cpuload" (or remote-host "localhost"))) ;; (> (random 100) 75) ;; about 25% of the time
;; 	(debug:print-info 1 *default-log-port* "Checking cpuload on " (or remote-host "localhost") ", maxload: " maxload
;;     ", load: " first ", adjmaxload: " adjmaxload ", loadjmp: " loadjmp))
;; 
;;     (debug:print-info 1 *default-log-port*
;; 		      "On host: " effective-host
;; 		      ", effective load: " effective-load
;; 		      ", numcpus: " numcpus
;; 		      ", normalized effective load: " normalized-effective-load
;; 		      )
;;     
;;     (cond
;;      ;; bad data, try again to get the data
;;      ((and (< first 0) ;; this indicates the loadavg data is bad - machine may not be reachable
;; 	   (> num-tries 0))
;;       (debug:print 0 *default-log-port* "WARNING: received bad data from get-cpu-load " first ", we'll sleep 10s and try " num-tries " more times.")
;;       (thread-sleep! 10)
;;       (common:wait-for-cpuload maxload-in numcpus-in waitdelay
;; 			       count: count remote-host: remote-host force-maxload: force-maxload num-tries: (- num-tries 1)))
;;      ;; need to wait for load to drop
;;      ((and will-wait ;; (> first adjmaxload)
;; 	   (> count 0))
;;       (debug:print-info 0 *default-log-port*
;; 			"Delaying " 15 ;; adjwait
;; 			" seconds due to normalized effective load " normalized-effective-load ;; first
;; 			" exceeding max of " adjmaxload
;; 			" on server " (or remote-host (get-host-name))
;; 			" (normalized load-limit: " maxload ") " (if msg msg ""))
;;       (thread-sleep! 15) ;; adjwait)
;;       (common:wait-for-cpuload maxload numcpus waitdelay count: (- count 1) msg: msg remote-host: remote-host))
;;      ((and (> loadjmp (cond
;; 		       (load-jump-limit load-jump-limit)
;; 		       ((> numcpus 8)(/ numcpus 2))
;; 		       ((> numcpus 4)(/ numcpus 1.2))
;; 		       (else 0.5)))
;; 	   (> count 0))
;;       (debug:print-info 0 *default-log-port* "waiting " adjwait " seconds due to possible load jump " loadjmp ". "
;; 			(if msg msg ""))
;;       (thread-sleep! adjwait)
;;       (common:wait-for-cpuload maxload numcpus waitdelay count: (- count 1) msg: msg remote-host: remote-host))
;;      (else
;;       (if (> num-tries 0)
;; 	  (if (common:low-noise-print 30 (conc (round first) "-load-acceptable-" (or remote-host "localhost")))
;; 	      (debug:print 0 *default-log-port* "Load on " (or remote-host "localhost") " is acceptable at " first " continuing."))
;; 	  (debug:print 0 *default-log-port* "Load on " (or remote-host "localhost") ", "first" could not be retrieved. Giving up and continuing."))))))
;; 
(define (get-uname . params)
  (let* ((uname-res (process:cmd-run->list (conc "uname " (if (null? params) "-a" (car params)))))
	 (uname #f))
    (if (null? (car uname-res))
	"unknown"
	(caar uname-res))))

      ;; jobtools maxload is useful for where the full Megatest run is done on one machine
      (if maxload ;; only gate if maxload is specified, NOTE: maxload is normalized, i.e. load=1 means all cpus fully utilized
          (common:wait-for-normalized-load maxload "Waiting for load to drop before starting more tests" #f))

      ;; jobtools maxhomehostload is intended to prevent overloading on the homehost which can cause database corruption issues
      (if maxhomehostload
          (common:wait-for-homehost-load maxhomehostload
					 (conc "Waiting for homehost load to drop below normalized value of " maxhomehostload)))
      
      (run:test run-id run-info keyvals runname test-record flags #f test-registry all-tests-registry)
      (runs:incremental-print-results run-id)
      (hash-table-set! test-registry (db:test-make-full-name test-name item-path) 'running)
      (runs:shrink-can-run-more-tests-count runsdat)  ;; DELAY TWEAKER (still needed?)
      ;; (thread-sleep! *global-delta*)
      (if (or (not (null? tal))(not (null? reg)))

	 ((not items)
          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-2")
	  (debug:print-info 4 *default-log-port* "OUTER COND: (not items)")
	  (if (and (not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path required: required-tests))
		   (not (null? tal)))
	      (loop (car tal)(cdr tal) reg reruns))
	  (runs:testdat-prereqs-not-met-set! testdat (rmt:get-prereqs-not-met run-id waitons hed item-path mode: testmode itemmaps: itemmaps))

	  ;; This would be a good place to block on homehost load



	  
	  (runs:dat-can-run-more-tests-set! runsdat (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
	  (let ((loop-list (runs:process-expanded-tests runsdat testdat)))
            (if loop-list (apply loop loop-list))))

	 ;; items processed into a list but not came in as a list been processed
	 ;;
	 ((and (list? items)     ;; thus we know our items are already calculated

		      " -server " (or target-host "-") (if (equal? (configf:lookup *configdat* "server" "daemonize") "yes")
							   " -daemonize "
							   "")
		      ;; " -log " logfile
		      " -m testsuite:" testsuite
		      " " profile-mode
		      )) ;; (conc " >> " logfile " 2>&1 &")))))
	 (log-rotate  (make-thread common:rotate-logs  "server run, rotate logs thread")) ;; why are we rotating logs here? This is a sensitive location with a lot going on!?
         (load-limit  (configf:lookup-number *configdat* "jobtools" "max-server-start-load" default: 3.0)))
    ;; we want the remote server to start in *toppath* so push there
    (push-directory areapath)
    (debug:print 0 *default-log-port* "INFO: Trying to start server (" cmdln ") ...")
    (thread-start! log-rotate)
    
    ;; host.domain.tld match host?
    (if (and target-host 
	     ;; look at target host, is it host.domain.tld or ip address and does it 
	     ;; match current ip or hostname
	     (not (string-match (conc "("curr-host "|" curr-host"\\..*)") target-host))
	     (not (equal? curr-ip target-host)))
	(begin
	  (debug:print-info 0 *default-log-port* "Starting server on " target-host ", logfile is " logfile)
	  (setenv "TARGETHOST" target-host)))
      
    (setenv "TARGETHOST_LOGF" logfile)
    (thread-sleep! (/ (random 5000) 1000)) ;; add about a random (up to 5 seconds) initial delay. It seems pretty common that many running tests request a server at the same time
    ;; (common:wait-for-normalized-load load-limit " delaying server start due to load" target-host) ;; do not try starting servers on an already overloaded machine, just wait forever
    #;(common:wait-for-homehost-load load-limit (conc " delaying server start due to load on homehost. limit is " load-limit))
    (system (conc "nbfake " cmdln))
    (unsetenv "TARGETHOST_LOGF")
    (if (get-environment-variable "TARGETHOST")(unsetenv "TARGETHOST"))
    (thread-join! log-rotate)
    (pop-directory)))

;; given a path to a server log return: host port startseconds

	#f)))

(define (server:get-client-signature) ;; BB> why is this proc named "get-"?  it returns nothing -- set! has not return value.
  (if *my-client-signature* *my-client-signature*
      (let ((sig (server:mk-signature)))
        (set! *my-client-signature* sig)
        *my-client-signature*)))

;; wait for server=start-last to be three seconds old
;;
(define (server:wait-for-server-start-last-flag areapath)
  (let* ((start-flag (conc areapath "/logs/server-start-last")))
    (if (file-exists? start-flag)
	(let* ((fmodtime (file-modification-time start-flag)))
	  (if (> (- (current-seconds) fmodtime) 3) ;; good enough
	      (system (conc "touch " start-flag)) ;; lazy but safe
	      (begin
		(thread-sleep! 5)
		(server:wait-for-server-start-last-flag areapath))))
	(system (conc "touch " start-flag)))))
	      

;; kind start up of servers, wait 40 seconds before allowing another server for a given
;; run-id to be launched
;;
(define (server:kind-run areapath)
  ;; look for $MT_RUN_AREA_HOME/logs/server-start-last
  ;; and wait for it to be at least 3 seconds old
  (server:wait-for-server-start-last-flag areapath)
  (if (not (server:check-if-running areapath)) ;; why try if there is already a server running?
      (let* ((last-run-dat (hash-table-ref/default *server-kind-run* areapath '(0 0))) ;; callnum, whenrun
	     (call-num     (car last-run-dat))
	     (when-run     (cadr last-run-dat))
	     (run-delay    (+ (case call-num
				((0)    0)
				((1)   20)
				((2)  300)
				(else 600))
			      (random 5)))   ;; add a small random number just in case a lot of jobs hit the work hosts simultaneously
	     (lock-file    (conc areapath "/logs/server-start.lock")))
	(if	(> (- (current-seconds) when-run) run-delay)
		(begin
		  (common:simple-file-lock-and-wait lock-file expire-time: 15)
		  (server:run areapath)
		  (thread-sleep! 2) ;; don't release the lock for at least a few seconds
		  (common:simple-file-release-lock lock-file)))
	(hash-table-set! *server-kind-run* areapath (list (+ call-num 1)(current-seconds))))))

;; this one seems to be the general entry point
;;
(define (server:start-and-wait areapath #!key (timeout 60))
  (let ((give-up-time (+ (current-seconds) timeout)))
    (let loop ((server-url (server:check-if-running areapath))
	       (try-num    0))
      (if (or server-url
	      (> (current-seconds) give-up-time)) ;; server-url will be #f if no server available.
	  server-url