Megatest

  (let ((res (assoc key lst)))
    (if res (cadr res)(if (null? default) #f (car default)))))

;;======================================================================
;; Misc utils
;;======================================================================

;; Convert strings like "5s 2h 3m" => 60x60x2 + 3x60 + 5
(define (common:hms-string->seconds tstr)
  (let ((parts     (string-split tstr))
	(time-secs 0)
	;; s=seconds, m=minutes, h=hours, d=days
	(trx       (regexp "(\\d+)([smhd])")))
    (for-each (lambda (part)
		(let ((match  (string-match trx part)))
		  (if match
		      (let ((val (string->number (cadr match)))
			    (unt (caddr match)))
			(if val 
			    (set! time-secs (+ time-secs (* val
							    (case (string->symbol unt)
							      ((s) 1)
							      ((m) 60)
							      ((h) (* 60 60))
							      ((d) (* 24 60 60))
							      (else 0))))))))))
	      parts)
    time-secs))
		       
(define (common:version-signature)
  (conc megatest-version "-" (substring megatest-fossil-hash 0 4)))

;; one-of args defined
(define (args-defined? . param)
  (let ((res #f))
    (for-each 
     (lambda (arg)
       (if (args:get-arg arg)(set! res #t)))
     param)

		(if (null? tala) ;; we are done
		    talb
		    (loop (car tala)
			  (cdr tala)
			  (car talb)
			  (cdr talb)))
		#f)))))

;; Needed for long lists to be sorted where (apply max ... ) dies
;;
(define (common:max inlst)
  (let loop ((max-val (car inlst))
	     (hed     (car inlst))
	     (tal     (cdr inlst)))
    (if (not (null? tal))
	(loop (max hed max-val)
	      (car tal)
	      (cdr tal))
	(max hed max-val))))


;;======================================================================
;; Munge data into nice forms
;;======================================================================

;; Generate an index for a sparse list of key values
;;   ( (rowname1 colname1 val1)(rowname2 colname2 val2) )

(define (configf:section-vars cfgdat section)
  (let ((sectdat (hash-table-ref/default cfgdat section '())))
    (if (null? sectdat)
	'()
	(map car sectdat))))

(define (configf:get-section cfgdat section)
  (hash-table-ref/default cfgdat section '()))

(define (setup)
  (let* ((configf (find-config))
	 (config  (if configf (read-config configf #f #t) #f)))
    (if config
	(setenv "RUN_AREA_HOME" (pathname-directory configf)))

;; S U M M A R Y 
;;======================================================================
;;
;; General info about the run(s) and megatest area
(define (dashboard:summary)
  (let ((rawconfig        (read-config (conc *toppath* "/megatest.config") #f 'return-string)))
    (iup:vbox
     (iup:split
      ;; #:value 500
      (iup:frame 
       #:title "General Info"
       (iup:hbox 
	(dcommon:keys-matrix rawconfig)
	(dcommon:general-info)
	))
      (iup:frame
       #:title "Server"
       (dcommon:servers-table)))
     (iup:frame 
      #:title "Megatest config settings"
      (iup:hbox
       (dcommon:section-matrix rawconfig "setup" "Varname" "Value")
       (iup:vbox
	(dcommon:section-matrix rawconfig "server" "Varname" "Value")
	;; (iup:frame

;; (define (tests window-id)
(define (dashboard:one-run)
  (let* ((tb      (iup:treebox
		   #:value 0
		   #:name "Runs"
		   #:expand "YES"
		   #:addexpanded "NO"
		   #:selection-cb
		   (lambda (obj id state)
		     ;; (print "obj: " obj ", id: " id ", state: " state)
		     (let* ((run-path (tree:node->path obj id))
			    (run-id   (tree-path->run-id (cdr run-path))))
		       (if run-id
			   (begin
			     (dboard:data-set-curr-run-id! *data* run-id)
			     (dashboard:update-run-summary-tab)))
		       ;; (print "path: " (tree:node->path obj id) " run-id: " run-id)
		       ))))
	 (run-matrix (iup:matrix
		      #:expand "YES"))
	 (updater  (lambda ()
		     (let* ((runs-dat     (mt:get-runs-by-patt *keys* "%" #f))
			    (runs-header  (vector-ref runs-dat 0)) ;; 0 is header, 1 is list of records
			    (run-id       (dboard:data-get-curr-run-id *data*))
			    (tests-dat    (let ((tdat (mt:get-tests-for-run run-id "%" '() '()
									    qryvals: "id,testname,item_path,state,status"))) ;; get 'em all
					    (sort tdat (lambda (a b)
							 (let* ((aval (vector-ref a 2))
								(bval (vector-ref b 2))
								(anum (string->number aval))
								(bnum (string->number bval)))
							   (if (and anum bnum)
							       (< anum bnum)
							       (string<= aval bval)))))))
			    (tests-mindat (dcommon:minimize-test-data tests-dat))
			    (indices      (common:sparse-list-generate-index tests-mindat)) ;;  proc: set-cell))
			    (row-indices  (cadr indices))
			    (col-indices  (car indices))
			    (max-row      (if (null? row-indices) 1 (common:max (map cadr row-indices))))
			    (max-col      (if (null? col-indices) 1 (common:max (map cadr col-indices))))
			    (max-visible  (max (- *num-tests* 15) 3)) ;; *num-tests* is proportional to the size of the window
			    (numrows      1)
			    (numcols      1)
			    (changed      #f)
			    (runs-hash    (let ((ht (make-hash-table)))
					    (for-each (lambda (run)
							(hash-table-set! ht (db:get-value-by-header run runs-header "id") run))

  (set! *last-db-update-time* (file-modification-time (conc *toppath* "/megatest.db"))))

(define (dashboard:recalc modtime please-update-buttons last-db-update-time)
  (or please-update-buttons
      (and (> modtime last-db-update-time)
	   (> (current-seconds)(+ last-db-update-time 1)))))

(define *monitor-db-path* (conc *toppath* "/monitor.db"))
(define *last-monitor-update-time* 0)

(define (dashboard:run-update x)
  (let* ((modtime         (file-modification-time *db-file-path*))
	 (monitor-modtime (file-modification-time *monitor-db-path*))
	 (run-update-time (current-seconds))
	 (recalc          (dashboard:recalc modtime *please-update-buttons* *last-db-update-time*)))
    (if (and (eq? *current-tab-number* 0)
	     (> monitor-modtime *last-monitor-update-time*))
	(begin
	  (set! *last-monitor-update-time* monitor-modtime)
	  (if dashboard:update-servers-table (dashboard:update-servers-table))))
    (if recalc
	(begin	
	  (case *current-tab-number* 
	    ((0) 

	     (if dashboard:update-summary-tab (dashboard:update-summary-tab)))
	    ((1) ;; The runs table is active
	     (update-rundat (hash-table-ref/default *searchpatts* "runname" "%") *num-runs*
			    (hash-table-ref/default *searchpatts* "test-name" "%/%")
			    ;; (hash-table-ref/default *searchpatts* "item-name" "%")
			    (let ((res '()))
			      (for-each (lambda (key)
					  (if (not (equal? key "runname"))

     run-id
     )
    (debug:print-info 11 "db:get-tests-for-run START run-id=" run-id ", testpatt=" testpatt ", states=" states ", statuses=" statuses ", not-in=" not-in ", sort-by=" sort-by)
    res))

;; get a useful subset of the tests data (used in dashboard
;; use db:mintests-get-{id ,run_id,testname ...}
(define (db:get-tests-for-runs-mindata db run-ids testpatt states status not-in)
  (db:get-tests-for-runs db run-ids testpatt states status not-in: not-in qryvals: "id,run_id,testname,state,status,event_time,item_path"))

;; NB // This is get tests for "runs" (note the plural!!)
;;
;; states and statuses are lists, turn them into ("PASS","FAIL"...) and use NOT IN
;; i.e. these lists define what to NOT show.
;; states and statuses are required to be lists, empty is ok
;; not-in #t = above behaviour, #f = must match
;; run-ids is a list of run-ids or a single number or #f for all runs
(define (db:get-tests-for-runs db run-ids testpatt states statuses 
			      #!key (not-in #t)
			      (sort-by #f)
			      (qryvals "id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment")) ;; 'rundir 'event_time
  (debug:print-info 11 "db:get-tests-for-run START run-ids=" run-ids ", testpatt=" testpatt ", states=" states ", statuses=" statuses ", not-in=" not-in ", sort-by=" sort-by)
  (let* ((res '())
	 ;; if states or statuses are null then assume match all when not-in is false

			      (conc " status "
				    (if not-in "NOT" "") 
				    " IN ('" 
				    (string-intersperse statuses "','")
				    "')")))
	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT " qryvals 
				" FROM tests WHERE state != 'DELETED' "
				(if run-ids
				    (if (list? run-ids)
					(conc "AND run_id IN (" (string-intersperse (map conc run-ids) ",") ") ")
					(conc "AND run_id=" run-ids " "))
				    " ") ;; #f => run-ids don't filter on run-ids
				(if states-qry   (conc " AND " states-qry)   "")
				(if statuses-qry (conc " AND " statuses-qry) "")
				(if tests-match-qry (conc " AND (" tests-match-qry ") ") "")
				(case sort-by
				  ((rundir)     " ORDER BY length(rundir) DESC;")
				  ((event_time) " ORDER BY event_time ASC;")

(define (cdb:tests-update-uname-host serverdat test-id uname hostname)
  (cdb:client-call serverdat 'update-uname-host #t *default-numtries* test-id uname hostname))

;; speed up for common cases with a little logic
(define (db:test-set-state-status-by-id db test-id newstate newstatus newcomment)
  (cond
   ((and newstate newstatus newcomment)
    (sqlite3:execute db "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;" newstate newstatus newcomment test-id))
   ((and newstate newstatus)
    (sqlite3:execute db "UPDATE tests SET state=?,status=? WHERE id=?;" newstate newstatus test-id))
   (else
    (if newstate   (sqlite3:execute db "UPDATE tests SET state=?   WHERE id=?;" newstate   test-id))
    (if newstatus  (sqlite3:execute db "UPDATE tests SET status=?  WHERE id=?;" newstatus  test-id))
    (if newcomment (sqlite3:execute db "UPDATE tests SET comment=? WHERE id=?;" newcomment test-id)))))

	     (for-each 
	      (lambda (test)
		;; (if (equal? waitontest-name (db:test-get-testname test)) ;; by defintion this had better be true ...
		(let* ((state             (db:test-get-state test))
		       (status            (db:test-get-status test))
		       (item-path         (db:test-get-item-path test))
		       (is-completed      (equal? state "COMPLETED"))
		       (is-killed         (equal? state "KILLED"))
		       (is-ok             (member status '("PASS" "WARN" "CHECK" "WAIVED" "SKIP")))
		       (same-itempath     (equal? ref-item-path item-path)))
		  (set! ever-seen #t)
		  (cond
		   ;; case 1, non-item (parent test) is 
		   ((and (equal? item-path "") ;; this is the parent test
			 is-completed
			 (or is-ok (member mode '(toplevel itemmatch))))
		    (set! parent-waiton-met #t))
		   ;; Special case for toplevel and KILLED
		   ((and (equal? item-path "") ;; this is the parent test
			 is-killed
			 (eq? mode 'toplevel))
		    (set! parent-waiton-met #t))
		   ((or (and (not same-itempath)
			     (eq? mode 'itemmatch))  ;; in itemmatch mode we look only at the same itempath
			(and same-itempath
			     is-completed
			     (or is-ok 
				 (eq? mode 'toplevel)              ;; toplevel does not block on FAIL

(include "common_records.scm")
(include "db_records.scm")
(include "key_records.scm")

;; yes, this is non-ideal 
(define dashboard:update-summary-tab #f)
(define dashboard:update-servers-table #f)

;;======================================================================
;; C O M M O N   D A T A   S T R U C T U R E
;;======================================================================
;; 
;; A single data structure for all the data used in a dashboard.
;; Share this structure between newdashboard and dashboard with the 

				   (synchash:client-get 'db:get-test-info-by-ids get-details-sig 0  data test-ids)
				   '()))

	 ;; Now can calculate the run-ids
	 (run-hash    (hash-table-ref/default data get-runs-sig #f))
	 (run-ids     (if run-hash (filter number? (hash-table-keys run-hash)) '()))

	 (test-changes (synchash:client-get 'db:get-tests-for-runs-mindata get-tests-sig 0 data run-ids testpatt states statuses #f))
	 (runs-hash    (hash-table-ref/default data get-runs-sig #f))
	 (header       (hash-table-ref/default runs-hash "header" #f))
	 (run-ids      (sort (filter number? (hash-table-keys runs-hash))
			     (lambda (a b)
			       (let* ((record-a (hash-table-ref runs-hash a))
				      (record-b (hash-table-ref runs-hash b))
				      (time-a   (db:get-value-by-header record-a header "event_time"))

			;; #:scrollbar "YES"
			#:numcol 1
			#:numlin (length key-vals)
			#:numcol-visible 1
			#:numlin-visible (length key-vals)
			#:click-cb (lambda (obj lin col status)
				     (print "obj: " obj " lin: " lin " col: " col " status: " status)))))
    ;; (iup:attribute-set! keys-matrix "0:0" "Run Keys")
    (iup:attribute-set! keys-matrix "WIDTH0" 0)
    (iup:attribute-set! keys-matrix "0:1" "Key Name")
    ;; (iup:attribute-set! keys-matrix "WIDTH1" "100")
    ;; fill in keys
    (for-each 
     (lambda (var)
       ;; (iup:attribute-set! keys-matrix "ADDLIN" (conc curr-row-num))
       (iup:attribute-set! keys-matrix (conc curr-row-num ":0") curr-row-num)
       (iup:attribute-set! keys-matrix (conc curr-row-num ":1") var)
       (set! curr-row-num (+ 1 curr-row-num))) ;; (config-lookup *configdat* "fields" var)))
     key-vals)
    (iup:attribute-set! keys-matrix "WIDTHDEF" "40")
    keys-matrix))

;; Section to table
(define (dcommon:section-matrix rawconfig sectionname varcolname valcolname #!key (title #f))
  (let* ((curr-row-num    1)
	 (key-vals        (configf:section-vars rawconfig sectionname))
	 (section-matrix  (iup:matrix

			 #:numlin-visible 3)))
    (iup:attribute-set! general-matrix "WIDTH1" "200")
    (iup:attribute-set! general-matrix "0:1" "About this Megatest area") 
    ;; User (this is not always obvious - it is common to run as a different user
    (iup:attribute-set! general-matrix "1:0" "User")
    (iup:attribute-set! general-matrix "1:1" (current-user-name))
    ;; Megatest area
    (iup:attribute-set! general-matrix "2:0" "Area")
    (iup:attribute-set! general-matrix "2:1" *toppath*)
    ;; Megatest version
    (iup:attribute-set! general-matrix "3:0" "Version")
    (iup:attribute-set! general-matrix "3:1" megatest-version)

    general-matrix))

(define (dcommon:run-stats)
  (let* ((stats-matrix (iup:matrix expand: "YES"))
	 (changed      #f)
	 (updater      (lambda ()
			 (let* ((run-stats    (mt:get-run-stats))

    (updater)
    (set! dashboard:update-summary-tab updater)
    (iup:attribute-set! stats-matrix "WIDTHDEF" "40")
    (iup:vbox
     (iup:label "Run statistics"  #:expand "HORIZONTAL")
     stats-matrix)))

(define (dcommon:servers-table)
  (let* ((colnum         0)
	 (rownum         0)
	 (servers-matrix (iup:matrix #:expand "YES"
				     #:numcol 7
				     #:numcol-visible 7
				     #:numlin-visible 3
				     ))
	 (colnames       (list "Id" "MTver" "Pid" "Host" "Interface:OutPort" "InPort" "State" "Transport"))
	 (updater        (lambda ()
			   (let ((servers (open-run-close tasks:get-all-servers tasks:open-db)))
			     (iup:attribute-set! servers-matrix "NUMLIN" (length servers))
			     ;; (set! colnum 0)
			     ;; (for-each (lambda (colname)
			     ;;    	 ;; (print "colnum: " colnum " colname: " colname)
			     ;;    	 (iup:attribute-set! servers-matrix (conc "0:" colnum) colname)
			     ;;    	 (set! colnum (+ 1 colnum)))
			     ;;           colnames)
			     (set! rownum 1)
			     (for-each 
			      (lambda (server)
				(set! colnum 0)
				(let* ((vals (list (vector-ref server 0) ;; Id
						   (vector-ref server 9) ;; MT-Ver
						   (vector-ref server 1) ;; Pid
						   (vector-ref server 2) ;; Hostname
						   (conc (vector-ref server 3) ":" (vector-ref server 4)) ;; IP:Port
						   (vector-ref server 5) ;; Pubport
						   ;; (vector-ref server 10) ;; Last beat
						   ;; (vector-ref server 6) ;; Start time
						   ;; (vector-ref server 7) ;; Priority
						   ;; (vector-ref server 8) ;; State
						   (if (< (vector-ref server 10) 20) ;; Status (Please redo this properly!)
						       "alive"
						       "dead")
						   (vector-ref server 11)  ;; Transport
						   )))
				  (for-each (lambda (val)
					      ;; (print "rownum: " rownum " colnum: " colnum " val: " val)
					      (iup:attribute-set! servers-matrix (conc rownum ":" colnum) val)
					      (iup:attribute-set! servers-matrix "FITTOTEXT" (conc "C" colnum))
					      (set! colnum (+ 1 colnum)))
					    vals)
				  (set! rownum (+ rownum 1)))
				 (iup:attribute-set! servers-matrix "REDRAW" "ALL"))
			      servers)))))
    (set! colnum 0)
    (for-each (lambda (colname)
		(iup:attribute-set! servers-matrix (conc "0:" colnum) colname)
		(iup:attribute-set! servers-matrix "FITTOTEXT" (conc "C" colnum))
		(set! colnum (+ colnum 1)))
	      colnames)
    (set! dashboard:update-servers-table updater) 
    ;; (iup:attribute-set! servers-matrix "WIDTHDEF" "40")
    (iup:hbox
     (iup:vbox
      (iup:button "Start"
		  ;; #:size "50x"
		  #:expand "YES"
		  #:action (lambda (obj)
			     (let ((cmd (conc ;; "xterm -geometry 180x20 -e \""
					      "megatest -server - &")))
					      ;; ";echo Press any key to continue;bash -c 'read -n 1 -s'\" &")))
			       (system cmd))))
      (iup:button "Stop"
		  #:expand "YES"
		  ;; #:size "50x"
		  #:action (lambda (obj)
			     (let ((cmd (conc ;; "xterm -geometry 180x20 -e \""
					      "megatest -stop-server 0 &")))
					      ;; ";echo Press any key to continue;bash -c 'read -n 1 -s'\" &")))
			       (system cmd))))
      (iup:button "Restart"
		  #:expand "YES"
		  ;; #:size "50x"
		  #:action (lambda (obj)
			     (let ((cmd (conc ;; "xterm -geometry 180x20 -e \""
					      "megatest -stop-server 0;megatest -server - &")))
					      ;; ";echo Press any key to continue;bash -c 'read -n 1 -s'\" &")))
			       (system cmd)))))
      servers-matrix
     )))
  
;; The main menu
(define (dcommon:main-menu)
  (iup:menu ;; a menu is a special attribute to a dialog (think Gnome putting the menu at screen top)
   (iup:menu-item "Files" (iup:menu   ;; Note that you can use either #:action or action: for options
		       (iup:menu-item "Open"  action: (lambda (obj)
							(iup:show (iup:file-dialog))
							(print "File->open " obj)))

	 (delta (map (lambda (a b)(abs (- a b))) c1 c2)))
    (null? (filter (lambda (x)(> x 3)) delta))))

(define (gutils:get-color-for-state-status state status);; #!key (get-label #f))
  ;; ((if get-label cadr car)
   (case (string->symbol state)
     ((COMPLETED)
      (case (string->symbol status)
	((PASS)        (list "70  249 73" status))
	((WARN WAIVED) (list "255 172 13" status))
	((SKIP)        (list "230 230 0" status))
	(else (list "223 33 49" status))))
     ;;      (if (equal? status "PASS")
     ;;	  '("70 249 73" "PASS")
     ;;	  (if (or (equal? status "WARN")
     ;;		  (equal? status "WAIVED"))
     ;;	      (list "255 172 13" status)
     ;;	      (list "223 33 49"  status)))) ;; greenish orangeish redish
     ((LAUNCHED)         (list "101 123 142"  state))
     ((CHECK)            (list "255 100 50"   state))
     ((REMOTEHOSTSTART)  (list "50 130 195"   state))
     ((RUNNING)          (list "9 131 232"    state))
     ((KILLREQ)          (list "39 82 206"    state))
     ((KILLED)           (list "234 101 17"   state))
     ((NOT_STARTED)      (list "240 240 240"  state))

	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (target    (assoc/default 'target    cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (env-ovrd  (assoc/default 'env-ovrd  cmdinfo))
	       (set-vars  (assoc/default 'set-vars  cmdinfo)) ;; pre-overrides from -setvar
	       (runname   (assoc/default 'runname   cmdinfo))
	       (megatest  (assoc/default 'megatest  cmdinfo))
	       (runtlim   (assoc/default 'runtlim   cmdinfo))
	       (mt-bindir-path (assoc/default 'mt-bindir-path cmdinfo))
	       (keys      #f)
	       (keyvals   #f)
	       (fullrunscript (if (not runscript)
                                  #f
                                  (if (substring-index "/" runscript)
                                      runscript ;; use unadultered if contains slashes

							  (round 
							   (- 
							    (current-seconds) 
							    start-seconds)))))
					(kill-tries 0))
				   (let loop ((minutes   (calc-minutes)))
				     (begin
				       (set! kill-job? (or (test-get-kill-request test-id) ;; run-id test-name itemdat))
							   (and runtlim (let* ((run-seconds   (- (current-seconds) start-seconds))
									       (time-exceeded (> run-seconds runtlim)))
									  (if time-exceeded
									      (begin
										(debug:print-info 0 "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" run-seconds " seconds, limit=" runtlim)
										#t)
									      #f)))))
				       ;; open-run-close not needed for test-set-meta-info
				       (tests:set-meta-info #f test-id run-id test-name itemdat minutes work-area)
				       (if kill-job? 
					   (begin
					     (mutex-lock! m)
					     (let* ((pid (vector-ref exit-info 0)))
					       (if (number? pid)
						   (process-signal pid signal/kill)
						   ;; (begin
						   ;;   (debug:print 0 "WARNING: Request received to kill job (attempt # " kill-tries ")")
						   ;;   (let ((processes (cmd-run->list (conc "pgrep -l -P " pid))))
						   ;;     (for-each 
						   ;;      (lambda (p)
						   ;;        (let* ((parts  (string-split p))
						   ;;      	 (p-id   (if (> (length parts) 0)
						   ;;      		     (string->number (car parts))
						   ;;      		     #f)))
						   ;;          (if p-id
						   ;;      	(begin
						   ;;      	  (debug:print 0 "Killing " (cadr parts) "; kill -9  " p-id)
						   ;;      	  (system (conc "kill -9 " p-id))))))
						   ;;      (car processes))
						   ;;     (system (conc "kill -9 -" pid))))
						   (begin
						     (debug:print 0 "WARNING: Request received to kill job but problem with process, attempting to kill manager process")
						     (tests:test-set-status! test-id "KILLED"  "FAIL"
								     (args:get-arg "-m") #f)
						     (sqlite3:finalize! tdb)
						     (exit 1))))
					     (set! kill-tries (+ 1 kill-tries))

   (list ;; (list "MT_TEST_RUN_DIR" work-area)
    (list "MT_RUN_AREA_HOME" *toppath*)
    (list "MT_TEST_NAME" test-name)
    ;; (list "MT_ITEM_INFO" (conc itemdat)) 
    (list "MT_RUNNAME"   runname)
    ;; (list "MT_TARGET"    mt_target)
    ))
  (let* ((useshell        (config-lookup *configdat* "jobtools"     "useshell"))
	 (launcher        (config-lookup *configdat* "jobtools"     "launcher"))
	 (runscript       (config-lookup test-conf   "setup"        "runscript"))
	 (ezsteps         (> (length (hash-table-ref/default test-conf "ezsteps" '())) 0)) ;; don't send all the steps, could be big
	 (diskspace       (config-lookup test-conf   "requirements" "diskspace"))
	 (memory          (config-lookup test-conf   "requirements" "memory"))
	 (hosts           (config-lookup *configdat* "jobtools"     "workhosts"))
	 (remote-megatest (config-lookup *configdat* "setup" "executable"))
	 (run-time-limit  (configf:lookup  test-conf   "requirements" "runtimelim"))
	 ;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to 
	 ;;                allow running from dashboard. Extract the path
	 ;;                from the called megatest and convert dashboard
	 ;;             	  or dboard to megatest
	 (local-megatest  (let* ((lm  (car (argv)))
				 (dir (pathname-directory lm))
				 (exe (pathname-strip-directory lm)))

				     (list 'runscript runscript) 
				     (list 'run-id    run-id   )
				     (list 'test-id   test-id  )
				     (list 'itemdat   itemdat  )
				     (list 'megatest  remote-megatest)
				     (list 'ezsteps   ezsteps) 
				     (list 'target    mt_target)
				     (list 'runtlim   (if run-time-limit (common:hms-string->seconds run-time-limit) #f))
				     (list 'env-ovrd  (hash-table-ref/default *configdat* "env-override" '())) 
				     (list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
				     (list 'runname   runname)
				     (list 'mt-bindir-path mt-bindir-path)))))))
    ;; clean out step records from previous run if they exist
    ;; (debug:print-info 4 "FIXMEEEEE!!!! This can be removed some day, perhaps move all test records to the test db?")
    ;; (open-run-close db:delete-test-step-records db test-id)

;; Always use two digit decimal
;; 1.01, 1.02...1.10,1.11 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.5508)

		  )))))

(if (or (args:get-arg "-list-servers")
	(args:get-arg "-stop-server"))
    (let ((tl (setup-for-run)))
      (if tl 
	  (let* ((servers (open-run-close tasks:get-all-servers tasks:open-db))
		 (fmtstr  "~5a~12a~8a~20a~24a~10a~10a~10a~10a\n")
		 (servers-to-kill '())
		 (killinfo   (args:get-arg "-stop-server"))
		 (khost-port (if killinfo (if (substring-index ":" killinfo)(string-split ":") #f) #f))
		 (sid        (if killinfo (if (substring-index ":" killinfo) #f (string->number killinfo)) #f)))
	    (format #t fmtstr "Id" "MTver" "Pid" "Host" "Interface:OutPort" "InPort" "LastBeat" "State" "Transport")
	    (format #t fmtstr "==" "=====" "===" "====" "=================" "======" "========" "=====" "=========")
	    (for-each 
	     (lambda (server)
	       (let* ((id         (vector-ref server 0))
		      (pid        (vector-ref server 1))
		      (hostname   (vector-ref server 2))
		      (interface  (vector-ref server 3)) 
		      (pullport   (vector-ref server 4))
		      (pubport    (vector-ref server 5))
		      (start-time (vector-ref server 6))
		      (priority   (vector-ref server 7))
		      (state      (vector-ref server 8))
		      (mt-ver     (vector-ref server 9))
		      (last-update (vector-ref server 10)) ;;   (open-run-close tasks:server-alive? tasks:open-db #f hostname: hostname port: port))
		      (transport  (vector-ref server 11))
		      (killed     #f)
		      (status     (< last-update 20)))
		 ;;   (zmq-sockets (if status (server:client-connect hostname port) #f)))
		 ;; no need to login as status of #t indicates we are connecting to correct 
		 ;; server
		 (if (equal? state "dead")
		     (if (> last-update (* 25 60 60)) ;; keep records around for slighly over a day.
			 (open-run-close tasks:server-deregister tasks:open-db hostname pullport: pullport pid: pid action: 'delete))
		     (if (> last-update 20)        ;; Mark as dead if not updated in last 20 seconds
			 (open-run-close tasks:server-deregister tasks:open-db hostname pullport: pullport pid: pid)))
		 (format #t fmtstr id mt-ver pid hostname (conc interface ":" pullport) pubport last-update
			 (if status "alive" "dead") transport)
		 (if (or (equal? id sid)
			 (equal? sid 0)) ;; kill all/any
		     (begin
		       (debug:print-info 0 "Attempting to stop server with pid " pid)
		       (tasks:kill-server status hostname pullport pid transport)))))
	     servers)

	   keyvals)))
    ;; from the cached data set the vars
    (hash-table-for-each
     vals
     (lambda (key val)
       (debug:print 2 "setenv " key " " val)
       (setenv key val)))
    (if (not (get-environment-variable "MT_TARGET"))(setenv "MT_TARGET" target))
    (alist->env-vars (hash-table-ref/default *configdat* "env-override" '()))
    ;; Lets use this as an opportunity to put MT_RUNNAME in the environment
    (setenv "MT_RUNNAME" (if inrunname inrunname (cdb:remote-run db:get-run-name-from-id #f run-id)))
    (setenv "MT_RUN_AREA_HOME" *toppath*)))

(define (set-item-env-vars itemdat)
  (for-each (lambda (item)

	 (keyvals     (keys:target->keyval keys target))
	 (run-id      (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))  ;;  test-name)))
	 (deferred    '()) ;; delay running these since they have a waiton clause
	 (runconfigf   (conc  *toppath* "/runconfigs.config"))
	 (required-tests '())
	 (test-records (make-hash-table))
	 (all-test-names (tests:get-valid-tests *toppath* "%"))) ;; we need a list of all valid tests to check waiton names

    (set-megatest-env-vars run-id inkeys: keys) ;; these may be needed by the launching process

    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals "pre-launch-env-vars")
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))
    
    ;; look up all tests matching the comma separated list of globs in
    ;; test-patts (using % as wildcard)

    ;; now add non-directly referenced dependencies (i.e. waiton)
    ;;======================================================================
    ;; refactoring this block into tests:get-full-data
    ;;======================================================================
    (if (not (null? test-names))
	(let loop ((hed (car test-names))
		   (tal (cdr test-names)))         ;; 'return-procs tells the config reader to prep running system but return a proc
	  (change-directory *toppath*) ;; PLEASE OPTIMIZE ME!!! I think this should be a no-op but there are several places where change-directories could be happening.
	  (let* ((config  (tests:get-testconfig hed 'return-procs))
		 (waitons (let ((instr (if config 
					   (config-lookup config "requirements" "waiton")
					   (begin ;; No config means this is a non-existant test
					     (debug:print 0 "ERROR: non-existent required test \"" hed "\"")
					     (exit 1)))))
			    (debug:print-info 8 "waitons string is " instr)

	       (if (not parent-test)
		   (debug:print 1 "NOTE: Not starting test " full-test-name " as it is state \"" (test:get-state testdat) 
				"\" and status \"" (test:get-status testdat) "\", use -rerun \"" (test:get-status testdat)
                                "\" or -force to override"))
	       ;; NOTE: No longer be checking prerequisites here! Will never get here unless prereqs are
	       ;;       already met.
	       ;; This would be a great place to do the process-fork
	       ;; 
	       (let ((skip-test   #f)
		     (skip-check  (configf:get-section test-conf "skip")))
		 (cond 
		  ;; Have to check for skip conditions. This one skips if there are same-named tests
		  ;; currently running
		  ((and skip-check
			(configf:lookup test-conf "skip" "prevrunning"))
		   (let ((running-tests (cdb:remote-run db:get-tests-for-runs-mindata #f #f full-test-name '("RUNNING") '() #f)))
		     (if (not (null? running-tests)) ;; have to skip 
			 (set! skip-test "Skipping due to previous tests running"))))
		  ((and skip-check
			(configf:lookup test-conf "skip" "fileexists"))
		   (if (file-exists? (configf:lookup test-conf "skip" "fileexists"))
		       (set! skip-test (conc "Skipping due to existance of file " (configf:lookup test-conf "skip" "fileexists"))))))
		 (if skip-test
		     (begin
		       (cdb:remote-run db:test-set-state-status-by-id #f test-id "COMPLETED" "SKIP" skip-test)
		       (debug:print-info 1 "SKIPPING Test " full-test-name " due to " skip-test))
		     (if (not (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat flags))
			 (begin
			   (print "ERROR: Failed to launch the test. Exiting as soon as possible")
			   (set! *globalexitstatus* 1) ;; 
			   (process-signal (current-process-id) signal/kill))))))))
	((KILLED) 
	 (debug:print 1 "NOTE: " full-test-name " is already running or was explictly killed, use -force to launch it."))
	((LAUNCHED REMOTEHOSTSTART RUNNING)  
	 (if (> (- (current-seconds)(+ (db:test-get-event_time testdat)
				       (db:test-get-run_duration testdat)))
		600) ;; i.e. no update for more than 600 seconds
	     (begin

;; state: 'live, 'shutting-down, 'dead
(define (tasks:server-register mdb pid interface port priority state transport #!key (pubport -1))
  (debug:print-info 11 "tasks:server-register " pid " " interface " " port " " priority " " state)
  (sqlite3:execute 
   mdb 
   "INSERT OR REPLACE INTO servers (pid,hostname,port,pubport,start_time,priority,state,mt_version,heartbeat,interface,transport)
                             VALUES(?,  ?,       ?,   ?,  strftime('%s','now'), ?, ?, ?, strftime('%s','now'),?,?);"
   pid (get-host-name) port pubport priority (conc state) 
   (common:version-signature)
   interface 
   (conc transport))
  (vector 
   (tasks:server-get-server-id mdb (get-host-name) interface port pid)
   interface
   port
   pubport
   transport
   ))

       (set! res (cons (vector id interface port pubport transport pid hostname) res))
       ;;(debug:print-info 2 "Found existing server " hostname ":" port " registered in db"))
       )
     mdb
     
     "SELECT id,interface,port,pubport,transport,pid,hostname FROM servers
          WHERE strftime('%s','now')-heartbeat < 10 
          AND mt_version=? ORDER BY start_time DESC LIMIT 1;" (common:version-signature))
    ;; for now we are keeping only one server registered in the db, return #f or first server found
    (if (null? res) #f (car res))))

;; BUG: This logic is probably needed unless methodology changes completely...
;;
;;     (if (null? res) #f
;; 	(let loop ((hed (car res))

	cd ..;make;make install
	cd fullrun;../../bin/megatest -server - -debug 22 &

stopserver :
	cd ..;make && make install
	cd fullrun;$(MEGATEST) -stop-server 0

repl :
	cd ..;make && make install
	cd fullrun;$(MEGATEST) -repl

test0 : cleanprep
	cd simplerun ; $(MEGATEST) -server - -debug $(DEBUG)

test1 : cleanprep
	rm -f simplerun/megatest.db
	rm -rf simplelinks/ simpleruns/
	mkdir -p simplelinks simpleruns

	cd fullrun;time $(MEGATEST) -debug $(DEBUG) -runtests % -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b -m "This is a comment specific to a run" -v $(LOGGING)

# NOTE: Only one instance can be a server
test5 : cleanprep
	@echo "WARNING: No longer running fullprep, test converage may be lessened"
	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_aa -debug $(DEBUG) $(LOGGING) > aa.log 2> aa.log &
	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ab -debug $(DEBUG) $(LOGGING) > ab.log 2> ab.log &
	cd fullrun;sleep 5;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ac -debug $(DEBUG) $(LOGGING) > ac.log 2> ac.log &
	cd fullrun;sleep 8;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ad -debug $(DEBUG) $(LOGGING) > ad.log 2> ad.log &	
#	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ae -debug $(DEBUG) $(LOGGING) > ae.log 2> ae.log &	
#	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_af -debug $(DEBUG) $(LOGGING) > af.log 2> af.log &	a

# MUST ADD THIS BACK IN ASAP!!!!
	# cd fullrun;sleep 10;$(MEGATEST) -run-wait  -target $(TARGET) :runname % -testpatt % :state RUNNING,LAUNCHED,NOT_STARTED,REMOTEHOSTSTART;echo ALL DONE

test6: fullprep

[setup]
runscript main.sh

[requirements]
priority 2
# runtimelim 1d 1h 1m 10s
runtimelim 10s

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single

[setup]
runscript main.sh

[requirements]
priority 5

[skip]
prevrunning #t

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt