Megatest

  (let ((res (assoc key lst)))
    (if res (cadr res)(if (null? default) #f (car default)))))

;;======================================================================
;; Misc utils
;;======================================================================

(define (common:version-signature)
  (conc megatest-version "-" (substring megatest-fossil-hash 0 4)))

;; one-of args defined
(define (args-defined? . param)
  (let ((res #f))
    (for-each 
     (lambda (arg)
       (if (args:get-arg arg)(set! res #t)))
     param)

		  )))))

(if (or (args:get-arg "-list-servers")
	(args:get-arg "-stop-server"))
    (let ((tl (setup-for-run)))
      (if tl 
	  (let* ((servers (open-run-close tasks:get-all-servers tasks:open-db))
		 (fmtstr  "~5a~12a~8a~20a~24a~10a~10a~10a~10a\n")
		 (servers-to-kill '())
		 (killinfo   (args:get-arg "-stop-server"))
		 (khost-port (if killinfo (if (substring-index ":" killinfo)(string-split ":") #f) #f))
		 (sid        (if killinfo (if (substring-index ":" killinfo) #f (string->number killinfo)) #f)))
	    (format #t fmtstr "Id" "MTver" "Pid" "Host" "Interface:OutPort" "InPort" "LastBeat" "State" "Transport")
	    (format #t fmtstr "==" "=====" "===" "====" "=================" "======" "========" "=====" "=========")
	    (for-each 
	     (lambda (server)
	       (let* ((id         (vector-ref server 0))
		      (pid        (vector-ref server 1))
		      (hostname   (vector-ref server 2))
		      (interface  (vector-ref server 3)) 
		      (pullport   (vector-ref server 4))
		      (pubport    (vector-ref server 5))
		      (start-time (vector-ref server 6))
		      (priority   (vector-ref server 7))
		      (state      (vector-ref server 8))
		      (mt-ver     (vector-ref server 9))
		      (last-update (vector-ref server 10)) ;;   (open-run-close tasks:server-alive? tasks:open-db #f hostname: hostname port: port))
		      (transport  (vector-ref server 11))
		      (killed     #f)
		      (status     (< last-update 20)))
		 ;;   (zmq-sockets (if status (server:client-connect hostname port) #f)))
		 ;; no need to login as status of #t indicates we are connecting to correct 
		 ;; server
		 (if (equal? state "dead")
		     (if (> last-update (* 25 60 60)) ;; keep records around for slighly over a day.
			 (open-run-close tasks:server-deregister tasks:open-db hostname pullport: pullport pid: pid action: 'delete))
		     (if (> last-update 20)        ;; Mark as dead if not updated in last 20 seconds
			 (open-run-close tasks:server-deregister tasks:open-db hostname pullport: pullport pid: pid)))
		 (format #t fmtstr id mt-ver pid hostname (conc interface ":" pullport) pubport last-update
			 (if status "alive" "dead") transport)
		 (if (or (equal? id sid)
			 (equal? sid 0)) ;; kill all/any
		     (begin
		       (debug:print-info 0 "Attempting to stop server with pid " pid)
		       (tasks:kill-server status hostname pullport pid transport)))))
	     servers)

	   keyvals)))
    ;; from the cached data set the vars
    (hash-table-for-each
     vals
     (lambda (key val)
       (debug:print 2 "setenv " key " " val)
       (setenv key val)))
    (if (not (get-environment-variable "MT_TARGET"))(setenv "MT_TARGET" target))
    (alist->env-vars (hash-table-ref/default *configdat* "env-override" '()))
    ;; Lets use this as an opportunity to put MT_RUNNAME in the environment
    (setenv "MT_RUNNAME" (if inrunname inrunname (cdb:remote-run db:get-run-name-from-id #f run-id)))
    (setenv "MT_RUN_AREA_HOME" *toppath*)))

(define (set-item-env-vars itemdat)
  (for-each (lambda (item)

	 (keyvals     (keys:target->keyval keys target))
	 (run-id      (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))  ;;  test-name)))
	 (deferred    '()) ;; delay running these since they have a waiton clause
	 (runconfigf   (conc  *toppath* "/runconfigs.config"))
	 (required-tests '())
	 (test-records (make-hash-table))
	 (all-test-names (tests:get-valid-tests *toppath* "%"))) ;; we need a list of all valid tests to check waiton names

    (set-megatest-env-vars run-id inkeys: keys) ;; these may be needed by the launching process

    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals "pre-launch-env-vars")
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))
    
    ;; look up all tests matching the comma separated list of globs in
    ;; test-patts (using % as wildcard)

    ;; now add non-directly referenced dependencies (i.e. waiton)
    ;;======================================================================
    ;; refactoring this block into tests:get-full-data
    ;;======================================================================
    (if (not (null? test-names))
	(let loop ((hed (car test-names))
		   (tal (cdr test-names)))         ;; 'return-procs tells the config reader to prep running system but return a proc
	  (change-directory *toppath*) ;; PLEASE OPTIMIZE ME!!! I think this should be a no-op but there are several places where change-directories could be happening.
	  (let* ((config  (tests:get-testconfig hed 'return-procs))
		 (waitons (let ((instr (if config 
					   (config-lookup config "requirements" "waiton")
					   (begin ;; No config means this is a non-existant test
					     (debug:print 0 "ERROR: non-existent required test \"" hed "\"")
					     (exit 1)))))
			    (debug:print-info 8 "waitons string is " instr)

;; state: 'live, 'shutting-down, 'dead
(define (tasks:server-register mdb pid interface port priority state transport #!key (pubport -1))
  (debug:print-info 11 "tasks:server-register " pid " " interface " " port " " priority " " state)
  (sqlite3:execute 
   mdb 
   "INSERT OR REPLACE INTO servers (pid,hostname,port,pubport,start_time,priority,state,mt_version,heartbeat,interface,transport)
                             VALUES(?,  ?,       ?,   ?,  strftime('%s','now'), ?, ?, ?, strftime('%s','now'),?,?);"
   pid (get-host-name) port pubport priority (conc state) 
   (common:version-signature)
   interface 
   (conc transport))
  (vector 
   (tasks:server-get-server-id mdb (get-host-name) interface port pid)
   interface
   port
   pubport
   transport
   ))

       (set! res (cons (vector id interface port pubport transport pid hostname) res))
       ;;(debug:print-info 2 "Found existing server " hostname ":" port " registered in db"))
       )
     mdb
     
     "SELECT id,interface,port,pubport,transport,pid,hostname FROM servers
          WHERE strftime('%s','now')-heartbeat < 10 
          AND mt_version=? ORDER BY start_time DESC LIMIT 1;" (common:version-signature))
    ;; for now we are keeping only one server registered in the db, return #f or first server found
    (if (null? res) #f (car res))))

;; BUG: This logic is probably needed unless methodology changes completely...
;;
;;     (if (null? res) #f
;; 	(let loop ((hed (car res))

# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh

# Test requirements are specified here
[requirements]
# waiton setup
priority 0

# Iteration for your tests are controlled by the items section
[items]
NUMBER #{scheme (string-intersperse (map number->string (sort (let loop ((a 0)(res '()))(if (<= a (or (any->number (get-environment-variable "NUMTESTS")) 2500))(loop (+ a 1)(cons a res)) res)) <)) " ")}
# NUMBER #{shell xterm}

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo