Megatest

;; archive - run bup
;;
;; 1. create the bup dir if not exists
;; 2. start the du of each directory
;; 3. gen index
;; 4. save
;;
(define (archive:run-bup archive-command run-id run-name tests)
  ;; move the getting of archive space down into the below block so that a single run can 
  ;; allocate as needed should a disk fill up
  ;;
  (let* ((min-space    (string->number (or (configf:lookup *configdat* "archive" "minspace") "1000")))

	 (archive-info (archive:allocate-new-archive-block *toppath* (common:get-testsuite-name) min-space))

	 (archive-dir  (if archive-info (cdr archive-info) #f))
	 (archive-id   (if archive-info (car archive-info) -1))
	 (disk-groups  (make-hash-table))
	 (test-groups  (make-hash-table)) ;; these two (disk and test groups) could be combined nicely
	 (bup-exe      (or (configf:lookup *configdat* "archive" "bup") "bup"))
	 (compress     (or (configf:lookup *configdat* "archive" "compress") "9"))
	 (linktree     (configf:lookup *configdat* "setup" "linktree")))

    (if (not archive-dir) ;; no archive disk found, this is fatal
	(begin
	  (debug:print 0 "FATAL: No archive disks found. Please add disks with at least " min-space " MB space to the [archive-disks] section of megatest.config")
	  (debug:print 0 "       use [archive] minspace to specify minimum available space")
	  (debug:print 0 "   disks: " (string-intersperse (map cadr (archive:get-archive-disks)) "\n         "))
	  (exit 1))

	 (run-n-wait bup-exe params: bup-index-params print-cmd: print-prefix)
	 (debug:print-info 0 "Archiving data with bup")
	 (run-n-wait bup-exe params: bup-save-params print-cmd: print-prefix)
	 (for-each
	  (lambda (test-dat)
	    (let ((test-id           (db:test-get-id        test-dat))
		  (run-id            (db:test-get-run_id    test-dat)))
	      (rmt:test-set-archive-block-id run-id test-id archive-id)
	      (if (member archive-command '("save-remove"))
		  (runs:remove-test-directory test-dat 'archive-remove))))
	  (hash-table-ref test-groups disk-group))))
     (hash-table-keys disk-groups))
    #t))

  '((0 "COMPLETED")
    (1 "NOT_STARTED")
    (2 "RUNNING")
    (3 "REMOTEHOSTSTART")
    (4 "LAUNCHED")
    (5 "KILLED")
    (6 "KILLREQ")
    (7 "STUCK")
    (8 "ARCHIVED")))

(define *common:std-statuses*
  '((0 "PASS")
    (1 "WARN")
    (2 "FAIL")
    (3 "CHECK")
    (4 "n/a")
    (5 "WAIVED")
    (6 "SKIP")
    (7 "DELETED")
    (8 "STUCK/DEAD")
    (9 "ABORT")))

;; These are stopping conditions that prevent a test from being run
(define *common:cant-run-states-sym* 
  '(COMPLETED KILLED WAIVED UNKNOWN INCOMPLETE ABORT ARCHIVED))

;;======================================================================
;; D E B U G G I N G   S T U F F 
;;======================================================================

(define *verbosity*         1)
(define *logging*           #f)

			   (itempath   (db:test-get-item-path test))
			   (testfullname (test:test-get-fullname test))
			   (teststatus (db:test-get-status   test))
			   (teststate  (db:test-get-state    test))
			   ;;(teststart  (db:test-get-event_time test))
			   ;;(runtime    (db:test-get-run_duration test))
			   (buttontxt  (cond
					((member teststate '("COMPLETED" "ARCHIVED")) teststatus)
					((and (equal? teststate "NOT_STARTED")
					      (member teststatus '("ZERO_ITEMS" "BLOCKED" "PREQ_FAIL" "PREQ_DISCARDED" "TIMED_OUT" "KEEP_TRYING" "TEN_STRIKES")))
					 teststatus)
					(else
					 teststate)))
			   (button     (vector-ref columndat rown))
			   (color      (car (gutils:get-color-for-state-status teststate teststatus)))

				      (iup:attribute-set! (dboard:data-get-runs-matrix *data*)
							  (conc rownum ":" 0) dispname)
				      ))
				;; set the cell text and color
				;; (debug:print 2 "rownum:colnum=" rownum ":" colnum ", state=" status)
				(iup:attribute-set! (dboard:data-get-runs-matrix *data*)
						    (conc rownum ":" colnum)
						    (if (member state '("ARCHIVED" "COMPLETED"))
							status
							state))
				(iup:attribute-set! (dboard:data-get-runs-matrix *data*)
						    (conc "BGCOLOR" rownum ":" colnum)
						    (car (gutils:get-color-for-state-status state status)))
				))
			    tests)))

	 (c2 (map string->number (string-split color2)))
	 (delta (map (lambda (a b)(abs (- a b))) c1 c2)))
    (null? (filter (lambda (x)(> x 3)) delta))))

(define (gutils:get-color-for-state-status state status);; #!key (get-label #f))
  ;; ((if get-label cadr car)
   (case (string->symbol state)
     ((COMPLETED ARCHIVED)
      (case (string->symbol status)
	((PASS)        (list "70  249 73" status))
	((WARN WAIVED) (list "255 172 13" status))
	((SKIP)        (list "230 230 0" status))
	(else (list "223 33 49" status))))
     ;;      (if (equal? status "PASS")
     ;;	  '("70 249 73" "PASS")

    (set! mt-bindir-path (pathname-directory remote-megatest))
    (if launcher (set! launcher (string-split launcher)))
    ;; set up the run work area for this test
    (if (and (args:get-arg "-preclean") ;; user has requested to preclean for this run
	     (not (member (db:test-get-rundir testinfo)(list "n/a" "/tmp/badname")))) ;; n/a is a placeholder and thus not a read dir
	(begin
	  (debug:print-info 0 "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path)
	  (runs:remove-test-directory #f testinfo 'remove-data-only))) ;; remove data only, do not perturb the record

    ;; prevent overlapping actions - set to LAUNCHED as early as possible
    ;;
    (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
    (rmt:roll-up-pass-fail-counts run-id test-name item-path "LAUNCHED")
    (set! diskpath (get-best-disk *configdat*))
    (if diskpath

;; Always use two or four digit decimal
;; 1.01, 1.02...1.10,1.11,1,1101 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.6007)

  -load file.scm          : load and run file.scm
  -mark-incompletes       : find and mark incomplete tests
  -ping run-id|host:port  : ping server, exit with 0 if found

Utilities
  -env2file fname         : write the environment to fname.csh and fname.sh
  -refdb2dat refdb        : convert refdb to sexp or to format specified by -dumpmode
                            formats: perl, ruby, sqlite3, csv (for csv the -o param
                            will substitute %s for the sheet name in generating 
                            multiple sheets)
  -o                      : output file for refdb2dat (defaults to stdout)
  -archive cmd            : archive runs specified by selectors to one of disks specified
                            in the [archive-disks] section.
                            cmd: keep-html, restore, save, save-remove

Spreadsheet generation
  -extract-ods fname.ods  : extract an open document spreadsheet from the database
  -pathmod path           : insert path, i.e. path/runame/itempath/logfile.html
                            will clear the field if no rundir/testname/itempath/logfile
                            if it contains forward slashes the path will be converted
                            to windows style

			"-port"
			"-extract-ods"
			"-pathmod"
			"-env2file"
			"-setvars"
			"-set-state-status"
			"-set-run-status"

			"-debug" ;; for *verbosity* > 2
			"-gen-megatest-test"
			"-override-timeout"
			"-test-files"  ;; -test-paths is for listing all
			"-load"        ;; load and exectute a scheme file
			"-section"
			"-var"
			"-dumpmode"
			"-run-id"
			"-ping"
			"-refdb2dat"
			"-o"
			"-log"
			"-archive"
			) 
		 (list  "-h" "-help" "--help"
			"-version"
		        "-force"
		        "-xterm"
		        "-showkeys"
		        "-show-keys"

;; fields are passing in through 
;; action:
;;    'remove-runs
;;    'set-state-status
;;
;; NB// should pass in keys?
;;
(define (runs:operate-on action target runnamepatt testpatt #!key (state #f)(status #f)(new-state-status #f)(mode 'remove-all)(options '()))
  (common:clear-caches) ;; clear all caches
  (let* ((db           #f)
	 (tdbdat       (tasks:open-db))
	 (keys         (rmt:get-keys))
	 (rundat       (mt:get-runs-by-patt keys runnamepatt target))
	 (header       (vector-ref rundat 0))
	 (runs         (vector-ref rundat 1))

					    (mt:test-set-state-status-by-id run-id (db:test-get-id test) "KILLREQ" "n/a" #f)
						  (thread-sleep! 1)))
					    ;; NOTE: This is suboptimal as the testdata will be used later and the state/status may have changed ...
					    (if (null? tal)
						(loop new-test-dat tal)
						(loop (car tal)(append tal (list new-test-dat)))))
					  (begin
					    (runs:remove-test-directory new-test-dat mode) ;; 'remove-all)
					    (if (not (null? tal))
						(loop (car tal)(cdr tal))))))))
			       ((set-state-status)
				(debug:print-info 2 "new state " (car state-status) ", new status " (cadr state-status))
				(mt:test-set-state-status-by-id run-id (db:test-get-id test) (car state-status)(cadr state-status) #f)
				(if (not (null? tal))
				    (loop (car tal)(cdr tal))))

		       )))))
	 ))
     runs)
    ;; (sqlite3:finalize! (db:delay-if-busy tdbdat))
    )
  #t)

(define (runs:remove-test-directory test mode) ;; remove-data-only)
  (let* ((run-dir       (db:test-get-rundir test))    ;; run dir is from the link tree
	 (real-dir      (if (file-exists? run-dir)
			    (resolve-pathname run-dir)
			    #f)))
    (case mode
      ((remove-data-only)(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "CLEANING" "LOCKED" #f))
      ((remove-all)      (mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "REMOVING" "LOCKED" #f))
      ((archive-remove)  (mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "ARCHIVE_REMOVING" #f #f)))
    (debug:print-info 1 "Attempting to remove " (if real-dir (conc " dir " real-dir " and ") "") " link " run-dir)
    (if (and real-dir 
	     (> (string-length real-dir) 5)
	     (file-exists? real-dir)) ;; bad heuristic but should prevent /tmp /home etc.
	(begin ;; let* ((realpath (resolve-pathname run-dir)))
	  (debug:print-info 1 "Recursively removing " real-dir)
	  (if (file-exists? real-dir)

		 (delete-directory run-dir)))
	    (if (and run-dir
		     (not (member run-dir (list "n/a" "/tmp/badname"))))
		(debug:print 0 "WARNING: not removing " run-dir " as it either doesn't exist or is not a symlink")
		(debug:print 0 "NOTE: the run dir for this test is undefined. Test may have already been deleted."))
	    ))
    ;; Only delete the records *after* removing the directory. If things fail we have a record 
    (case mode
      ((remove-data-only)(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "NOT_STARTED" "n/a" #f))
      ((archive-remove)  (mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "ARCHIVED" #f #f))
      (else (rmt:delete-test-records (db:test-get-run_id test) (db:test-get-id test))))))

;;======================================================================
;; Routines for manipulating runs
;;======================================================================

;; Since many calls to a run require pretty much the same setup 
;; this wrapper is used to reduce the replication of code