Megatest

				   cmd-in
				   (string->symbol cmd-in)))
            (params            (vector-ref dat 1))
            (start-t           (current-milliseconds))
            (readonly-mode     (dbr:dbstruct-read-only dbstruct))
            (readonly-command  (member cmd api:read-only-queries))
            (writecmd-in-readonly-mode (and readonly-mode (not readonly-command)))
            (foo               (begin
                                 (common:telemetry-log (conc "api-in:"(->string cmd))
                                                       payload: `((params . ,params)))
                                 
                                 #t))
            (res    
             (if writecmd-in-readonly-mode
                 (conc "attempt to run write command "cmd" on a read-only database")
                 (case cmd
                   ;;===============================================
                   ;; READ/WRITE QUERIES
                   ;;===============================================

                   ((testmeta-get-record)       (apply db:testmeta-get-record dbstruct params))

                   ;; TASKS 
                   ((find-task-queue-records)   (apply tasks:find-task-queue-records dbstruct params))
		   (else
		    (debug:print 0 *default-log-port* "ERROR: bad api call " cmd)
		    (conc "ERROR: BAD api call " cmd))))))

       
       ;; save all stats
       (let ((delta-t (- (current-milliseconds)
			 start-t)))
	 (hash-table-set! *db-api-call-time* cmd
			  (cons delta-t (hash-table-ref/default *db-api-call-time* cmd '()))))
       (if writecmd-in-readonly-mode
           (begin
             (common:telemetry-log (conc "api-out:"(->string cmd))
                                   payload: `((params . ,params)
                                              (ok-res . #t)))
	   (vector #f res)
           (vector #t res)))))))
	     (vector #f res))
           (begin
             (common:telemetry-log (conc "api-out:"(->string cmd))
                                   payload: `((params . ,params)
                                              (ok-res . #f)))
             (vector #t res))))))))

;; http-server  send-response
;;                 api:process-request
;;                    db:*
;;
;; NB// Runs on the server as part of the server loop
;;

;; 
;;     You should have received a copy of the GNU General Public License
;;     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

;;======================================================================

(use srfi-1 data-structures posix regex-case (prefix base64 base64:)
     format dot-locking csv-xml z3 ;; sql-de-lite
     format dot-locking csv-xml z3 udp ;; sql-de-lite
     hostinfo md5 message-digest typed-records directory-utils stack
     matchable regex posix (srfi 18) extras ;; tcp 
     (prefix nanomsg nmsg:)
     (prefix sqlite3 sqlite3:)
     pkts (prefix dbi dbi:)
     )

(define (get-file-descriptor-count #!key  (pid (current-process-id )))
  (list
    (length (glob (conc "/proc/" pid "/fd/*")))
    (length  (filter identity (map socket? (glob (conc "/proc/" pid "/fd/*")))))
  )
)

  

;; GLOBALS

;; CONTEXTS
(defstruct cxt
  (taskdb #f)
  (cmutex (make-mutex)))

	      (debug:print-info 13 *default-log-port* "loading writable-watchdog.")
	      (server:writable-watchdog dbstruct)))
	    (debug:print-info 13 *default-log-port* "watchdog done."))
	  (debug:print-info 13 *default-log-port* "no need for watchdog on non-homehost"))))


(define (std-exit-procedure)
  ;;(common:telemetry-log-close)
  (on-exit (lambda () 0))
  ;;(debug:print-info 13 *default-log-port* "std-exit-procedure called; *time-to-exit*="*time-to-exit*)
  (let ((no-hurry  (if *time-to-exit* ;; hurry up
		       #f
		       (begin
			 (set! *time-to-exit* #t)
			 #t))))

       (if thread
           (handle-exceptions
           exn
           #t ;; just ignore it, it might have died in the meantime so joining it will throw an exception
           (thread-join! thread))
           )))
   (hash-table-keys *common:thread-punchlist*)))

(define *common:telemetry-log-state* 'startup)
(define *common:telemetry-log-socket* #f)

(define (common:telemetry-log-open)
  (if (eq? *common:telemetry-log-state* 'startup)
      (let* ((serverhost (configf:lookup *configdat* "telemetry" "host"))
             (serverport (configf:lookup-number *configdat* "telemetry" "port"))
             (user (or (get-environment-variable "USER") "unknown"))
             (host (or (get-environment-variable "HOST") "unknown")))
        (set! *common:telemetry-log-state*
              (handle-exceptions
               exn
               (begin
                 (debug:print-info 0 *default-log-port* "common-telemetry-log open udp port failure")
                 'broken)
               (if (and serverhost serverport user host)
                   (let* ((s (udp-open-socket)))
                     ;;(udp-bind! s #f 0)
                     (udp-connect! s serverhost serverport)
                     (set! *common:telemetry-log-socket* s)
                     'open)
                   'not-needed))))))
  
(define (common:telemetry-log event #!key (payload '()))
  (if (eq? *common:telemetry-log-state* 'startup)
      (common:telemetry-log-open))

  (if (eq? 'open *common:telemetry-log-state*)
      (handle-exceptions
       exn
       (begin
         (debug:print-info 0 *default-log-port* "common-telemetry-log comms failure ; disabled (no server?)")
         ;;(define *common:telemetry-log-state* 'broken-or-no-server-preclose)
         ;;(common:telemetry-log-close)
         (define *common:telemetry-log-state* 'broken-or-no-server)
         (set! *common:telemetry-log-socket* #f)
         )
       (if (and *common:telemetry-log-socket* event) ;; TODO - filter on event against telemetry.want-events
           (let* ((user (or (get-environment-variable "USER") "unknown"))
                  (host (or (get-environment-variable "HOST") "unknown"))
                  (start (conc "[megatest "event"]"))
                  (toppath (or *toppath* "/dev/null"))
                  (payload-serialized
                   (base64:base64-encode
                    (z3:encode-buffer
                     (with-output-to-string (lambda () (pp payload))))))
                  (msg     (conc user":"host":"start":"(current-process-id)":"(car (argv))":"
                                 toppath":"payload-serialized)))
             (udp-send *common:telemetry-log-socket* msg))))))
  
(define (common:telemetry-log-close)
  (when (or (member *common:telemetry-log-state* '(broken-or-no-server-preclose open)) *common:telemetry-log-socket*)
    (handle-exceptions
     exn
     (begin
       (define *common:telemetry-log-state* 'closed-fail)
       (debug:print-info 0 *default-log-port* "common-telemetry-log closure failure")
       )
     (begin
       (define *common:telemetry-log-state* 'closed)
       (udp-close-socket *common:telemetry-log-socket*)
       (set! *common:telemetry-log-socket* #f)))))

       (hash-table-set! ht (car section)(cdr section)))
     adat)
    ht))

;; if 
(define (configf:read-alist fname)
  (handle-exceptions
      exn
      #f
    (configf:alist->config
     (with-input-from-file fname read))))
   exn
   #f
   (configf:alist->config
    (with-input-from-file fname read))))

(define (configf:write-alist cdat fname)
  (if (not (common:faux-lock fname))
      (debug:print 0 *default-log-port* "INFO: Could not get lock on " fname))
  (let* ((dat  (configf:config->alist cdat))
         (res
          (begin

   ;;  (debug:print 0 *default-log-port* "ERROR: attempt to open database when not on homehost. Exiting. Homehost: " (common:get-homehost))
   ;;  (exit 1))))

;; Open the classic megatest.db file (defaults to open in toppath)
;;
;;   NOTE: returns a dbdat not a dbstruct!
;;

;;(define (db:reopen-megatest-db

(define (db:open-megatest-db #!key (path #f)(name #f))
  (let* ((dbdir        (or path *toppath*))
         (dbpath       (conc  dbdir "/" (or name "megatest.db")))
	 (dbexists     (common:file-exists? dbpath))
	 (db           (db:lock-create-open dbpath
					    (lambda (db)
                                              (db:initialize-main-db db)

;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));

(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
	 (deadtime-str (configf:lookup *configdat* "setup" "deadtime")) ;; FIXME suspect test run time & deadtime are not well matched; resulting in COMPLETED/DEAD status of an a-ok running test
	 (deadtime     (if (and deadtime-str
				(string->number deadtime-str))
			   (string->number deadtime-str)
			   7200))) ;; two hours
         (deadtime-trim (or ovr-deadtime (configf:lookup-number *configdat* "setup" "deadtime")))
         (server-start-allowance 200)
         (server-overloaded-budget 200)
         (launch-monitor-off-time (or (configf:lookup-number *configdat* "setup" "test-stats-update-period") 30))
         (launch-monitor-on-time-budget 30)
         (launch-monitor-period (+ launch-monitor-off-time launch-monitor-on-time-budget server-overloaded-budget))
         (remotehoststart-deadtime-default (+ server-start-allowance server-overloaded-budget 30))
         (remotehoststart-deadtime (or deadtime-trim remotehoststart-deadtime-default))
         (running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))
         (running-deadtime (or deadtime-trim running-deadtime-default)) ;; two minutes (30 seconds between updates, this leaves 3x grace period)
         )
    (db:with-db 
     dbstruct #f #f
     (lambda (db)
       (if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
       
       ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
       ;;
       ;; HOWEVER: this code in run:test seems to work fine
       ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
       ;;                     (db:test-get-run_duration testdat)))
       ;;                    600) 
       ;; (db:delay-if-busy dbdat)
       (sqlite3:for-each-row 
        (lambda (test-id run-dir uname testname item-path)
        (lambda (test-id run-dir uname testname item-path event-time run-duration)
          (if (and (equal? uname "n/a")
                   (equal? item-path "")) ;; this is a toplevel test
              ;; what to do with toplevel? call rollup?
              (begin
                (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
                (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
              (begin
                (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))
                (debug:print-info 0 *default-log-port* "Found old test in RUNNING state, test-id=" test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time" run-duration="run-duration))))
        db
        "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING');"
        run-id running-deadtime)

       
       (sqlite3:for-each-row 
        (lambda (test-id run-dir uname testname item-path event-time run-duration)
          (if (and (equal? uname "n/a")
                   (equal? item-path "")) ;; this is a toplevel test
              ;; what to do with toplevel? call rollup?
              (begin
                (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
                (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
              (begin
                (debug:print-info 0 *default-log-port* "Found old test in REMOTEHOSTSTART state, test-id=" test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time" run-duration="run-duration)
              (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))
                (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted)))))
        db
        "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING','REMOTEHOSTSTART');"
        run-id deadtime)
        "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('REMOTEHOSTSTART');"
        run-id remotehoststart-deadtime)

       ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
       ;;
       ;; (db:delay-if-busy dbdat)
       (sqlite3:for-each-row
        (lambda (test-id run-dir uname testname item-path)
          (if (and (equal? uname "n/a")
                   (equal? item-path "")) ;; this is a toplevel test
              ;; what to do with toplevel? call rollup?
              (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
              (begin
                (debug:print-info 0 *default-log-port* "Found old test in LAUNCHED state, test-id=" test-id" 1 day since event_time marked")
              (set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched))))
                (set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched)))))
        db
        "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400 AND state IN ('LAUNCHED');"
        run-id)
       
       (debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")

       ;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
       ;;
       ;; (db:delay-if-busy dbdat)
       (let* (;; (min-incompleted (filter (lambda (x)
              ;;      		      (let* ((testpath (cadr x))
              ;;      			     (tdatpath (conc testpath "/testdat.db"))
              ;;      			     (dbexists (common:file-exists? tdatpath)))
              ;;      			(or (not dbexists) ;; if no file then something wrong - mark as incomplete
              ;;      			    (> (- (current-seconds)(file-modification-time tdatpath)) 600)))) ;; no change in 10 minutes to testdat.db - she's dead Jim
              ;;      		    incompleted))
              (min-incompleted-ids (map car incompleted)) ;; do 'em all
              (all-ids             (append min-incompleted-ids (map car oldlaunched))))
         (if (> (length all-ids) 0)
             (begin
               (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as INCOMPLETE")
               (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as DEAD")
               (for-each
                (lambda (test-id)
                  (db:test-set-state-status dbstruct run-id test-id "COMPLETED" "DEAD" "Test failed to complete")) ;; fix for one aspect of Randy's ticket 1405717332 ;; TODO - fix problem where test goes to COMPLETED/DEAD while in progress, only later to go to COMPLETED/PASS.  ref ticket 220546828

                  (db:set-state-status-and-roll-up-items dbstruct run-id test-id 'foo "COMPLETED" "DEAD" "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead."))
                  ;;(db:test-set-state-status dbstruct run-id test-id "COMPLETED" "DEAD" "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")) ;; fix for one aspect of Randy's ticket 1405717332 ;; TODO - fix problem where test goes to COMPLETED/DEAD while in progress, only later to go to COMPLETED/PASS.  ref ticket 220546828
                all-ids))))))))

;; ALL REPLACED BY THE BLOCK ABOVE
;;
;; 	    (sqlite3:execute 
;; 	     db
;; 	     (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN (" 

			   (db:test-get-testname testdat)
			   test-name))
	 (item-path    (db:test-get-item-path testdat))
         (tl-testdat   (db:get-test-info dbstruct run-id test-name ""))
         (tl-test-id   (if tl-testdat
			   (db:test-get-id tl-testdat)
			   #f)))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART")) 
	(db:general-call dbstruct 'set-test-start-time (list test-id)))
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (let ((tr-res
              (sqlite3:with-transaction

Developer Notes
---------------

Collected here are some topics that may interest the megatest developer.

telemetry
~~~~~~~~~

A new feature introduced in v1.6525 allows a centralized debug messaging system.  Debugging client-server issues
is greatly aided by a centralized, time coherent log of events across test execution, server, and runner.  This
is provided by the telemetry feature


source code call example


[source,ini]
 [telemetry]
 host <IP where telemetry daemon will run>
 port <UDP port to listen -- we recommend 5929>
 want-events <comma separated list of telemetry-log keywords

[source,ini]
 [telemetry]
 host 10.38.32.91
 port 5929
 want-events ALL

[source,scheme]
(common:telemetry-log <keyword string>


Usage:
1. Add telemetry section to megatest.config
2. Start telemetry daemon telemetry-daemon -a start -l /tmp/my-telemetry.log
3. Run megatest
4. examine / parse telemetry log

which can launch jobs on local and remote Linux hosts. Currently
megatest uses the network filesystem to call home to your master
sqlite3 database. Megatest has been used with the Intel Netbatch and
lsf (also known as openlava) batch systems and it should be
straightforward to use it with other similar systems.</p></div>
</div>
</div>
</div>
<div class="sect1">
<h2 id="_overview">Overview</h2>
<div class="sectionbody">
<div class="sect2">
<h3 id="_stand_alone_megatest_area">Stand-alone Megatest Area</h3>
<div class="paragraph"><p>A single, stand-alone, Megatest based testsuite or "area" is
sufficient for most validation, automation and build problems.</p></div>
<div class="imageblock">
<div class="content">
<img src="megatest-stand-alone-area.png" alt="Static">
</div>
</div>
<div class="paragraph"><p>Megatest is designed as a distributed or decoupled system. This means
you can run the areas stand-alone with no additional
infrastructure. I.e. there are no databases, web servers or other
centralized resources needed. However as your needs grow you can
integrate multiple areas into a bigger system.</p></div>
<div class="sect3">
<h4 id="_component_descriptions">Component Descriptions</h4>
<div class="olist arabic"><ol class="arabic">
<li>
<p>
Multi-area dashboard and xterm. A gui (the dashboard) is usually the
  best option for controlling and launching runs but all operations
  can also be done from the commandline. Note: The not yet released
  multi-area dashboard replaces the old dashboard for browsing and
  controlling runs but for managing a single area the old dashboard
  works very well.
</p>
</li>
<li>
<p>
Area/testsuite. This is your testsuite or automation definition and
  consists of the information in megatest.config, runconfigs.config
  and your testconfigs along with any custom scripting that can&#8217;t be
  done with the native Megatest features.
</p>
</li>
<li>
<p>
If your testsuite or build automation is too large to run on a
  single instance you can distribute your jobs into a compute server
  pool. The only current requirements are password-less ssh access and
  a network filesystem.
</p>
</li>
</ol></div>
</div>
</div>
<div class="sect2">
<h3 id="_full_system_architecture">Full System Architecture</h3>
<div class="imageblock">
<div class="content">
<img src="megatest-system-architecture.png" alt="Static">
</div>
</div>
</div>
</div>
</div>
<div class="sect1">
<h2 id="_installation">Installation</h2>
<div class="sectionbody">
<div class="sect2">
<h3 id="_dependencies">Dependencies</h3>
<div class="paragraph"><p>Chicken scheme and a number of "eggs" are required for building

</div>
</div>
</div>
<div id="footnotes"><hr></div>
<div id="footer">
<div id="footer-text">
Version 1.0<br>
Last updated 2018-11-29 09:32:52 PST
Last updated 2019-02-19 11:13:54 PST
</div>
</div>
</body>
</html>

			    (- 
			     (current-seconds) 
			     start-seconds)))))
	 (kill-tries 0))
    ;; (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area)
    ;; (tests:set-full-meta-info test-id run-id (calc-minutes) work-area)
    (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area 10)

    (let loop ((minutes   (calc-minutes))
	       (cpu-load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
	       (disk-free (get-df (current-directory)))
               (last-sync (current-seconds)))
      (common:telemetry-log "zombie" (conc "launch:monitor-job - top of loop encountered at "(current-seconds)" with last-sync="last-sync))
      (let* ((over-time     (> (current-seconds) (+ last-sync update-period)))
             (new-cpu-load  (let* ((load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
                                   (delta (abs (- load cpu-load))))
                              (if (> delta 0.1) ;; don't bother updating with small changes
                                  load
                                  #f)))
             (new-disk-free (let* ((df    (if over-time ;; only get df every 30 seconds
                                              (get-df (current-directory))
                                              disk-free))
                                   (delta (abs (- df disk-free))))
                              (if (and (> df 0)
                                       (> (/ delta df) 0.1)) ;; (> delta 200) ;; ignore changes under 200 Meg
                                  df
                                  #f)))
             (do-sync       (or new-cpu-load new-disk-free over-time)))
        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)
	(set! kill-job? (or (test-get-kill-request run-id test-id) ;; run-id test-name itemdat))
			    (and runtlim (let* ((run-seconds   (- (current-seconds) start-seconds))
             (do-sync       (or new-cpu-load new-disk-free over-time))

             (test-info   (rmt:get-test-info-by-id run-id test-id))
             (state       (db:test-get-state test-info))
             (status      (db:test-get-status test-info))
             (kill-reason  "no kill reason specified")
             (kill-job?    #f))
        (common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        (cond
         ((test-get-kill-request run-id test-id)
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))
						(time-exceeded (> run-seconds runtlim)))
					   (if time-exceeded
					       (begin
						 (debug:print-info 0 *default-log-port* "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" run-seconds " seconds, limit=" runtlim)
						 #t)
					       #f)))))
        (if do-sync
            (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f))
          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" run-seconds " seconds, limit=" runtlim))
          (set! kill-job? #t))
         ((equal? status "DEAD")
          (set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests (might indicate really overloaded server or else overzealous setup.deadtime)")
          (set! kill-job? #t)))

        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)
        (launch:handle-zombie-tests run-id)
        (when do-sync
          ;;(with-output-to-file (conc (getenv "MT_TEST_RUN_DIR") "/last-loadinfo.log" #:append)
          ;;  (lambda () (pp (list (current-seconds) new-cpu-load new-disk-free (calc-minutes)))))
          (common:telemetry-log "zombie" (conc  "launch:monitor-job - dosync started at "(current-seconds)))
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)
          (common:telemetry-log "zombie" (conc "launch:monitor-job - dosync finished at "(current-seconds)))
        
	(if kill-job? 
	    (begin
              (debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second
	      ;;       between tries?
	      (let* ((pid1 (launch:einf-pid exit-info)) ;; (vector-ref exit-info 0))
		     (pid2 (rmt:test-get-top-process-pid run-id test-id))
		     (pids (delete-duplicates (filter number? (list pid1 pid2)))))

				 (handle-exceptions
				  exn
				  #f
				  (process-signal pid-num signal/kill)))
			       (process:get-sub-pids pid))))
		       ;;    (debug:print-info 0 *default-log-port* "not killing process " pid " as it is not alive"))))
		       pids)
                      ;; BB: question to Matt -- does the tests:test-state-status! encompass rollup to toplevel?  If not, should it?
		      (tests:test-set-status! run-id test-id "KILLED"  "KILLED" (args:get-arg "-m") #f))
		      (tests:test-set-status! run-id test-id "KILLED"  "KILLED" (conc (args:get-arg "-m")" "kill-reason) #f)) ;; BB ADDED kill-reason -- confirm OK with Matt
		    (begin
		      (debug:print-error 0 *default-log-port* "Nothing to kill, pid1=" pid1 ", pid2=" pid2)
		      (tests:test-set-status! run-id test-id "KILLED"  "FAILED TO KILL" (args:get-arg "-m") #f)
		      (tests:test-set-status! run-id test-id "KILLED"  "FAILED TO KILL" (conc (args:get-arg "-m")" "kill-reason) #f) ;; BB ADDED kill-reason -- confirm OK with Matt
		      )))
	      (mutex-unlock! m)
	      ;; no point in sticking around. Exit now.
	      (exit)))
	(if (hash-table-ref/default misc-flags 'keep-going #f)
	    (begin
	      (thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses

          
	  (set! tconfigreg (tests:get-all)) ;; mapping of testname => test source path
	  (let ((sighand (lambda (signum)
			   ;; (signal-mask! signum) ;; to mask or not? seems to cause issues in exiting
			   (if (eq? signum signal/stop)
			       (debug:print-error 0 *default-log-port* "attempt to STOP process. Exiting."))
			   (set! *time-to-exit* #t)
			   (print "Received signal " signum ", cleaning up before exit. Please wait...")
			   (print "Received signal " signum ", cleaning up before exit (set this test to COMPLETED/ABORT) . Please wait...")
			   (let ((th1 (make-thread (lambda ()
                                                     (print "set test to COMPLETED/ABORT begin.")
						     (rmt:test-set-state-status run-id test-id "INCOMPLETE" "KILLED" #f)
						     (rmt:test-set-state-status run-id test-id "COMPLETED" "ABORT" "received kill signal")
                                                     (print "set test to COMPLETED/ABORT complete.")
						     (print "Killed by signal " signum ". Exiting")
						     (thread-sleep! 1)
						     (exit 1))))
				 (th2 (make-thread (lambda ()
						     (thread-sleep! 2)
						     (thread-sleep! 20)
						     (debug:print 0 *default-log-port* "Done")
						     (exit 4)))))
			     (thread-start! th2)
			     (thread-start! th1)
			     (thread-join! th2)))))
	    (set-signal-handler! signal/int sighand)
	    (set-signal-handler! signal/term sighand)

				  (exit))))
		 (test-pid  (db:test-get-process_id  test-info)))
	    (cond
             ;; -mrw- I'm removing KILLREQ from this list so that a test in KILLREQ state is treated as a "do not run" flag.
	     ((member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	      (debug:print 0 *default-log-port* "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")

              (rmt:general-call 'set-test-start-time #f test-id)
	      (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
              (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      ) ;; prime it for running
	     ((member (db:test-get-state test-info) '("RUNNING" "REMOTEHOSTSTART"))
	      (if (process:alive-on-host? test-host test-pid)
		  (debug:print-error 0 *default-log-port* "test state is "  (db:test-get-state test-info) " and process " test-pid " is still running on host " test-host ", cannot proceed")
		  (exit)))
	     ((not (member (db:test-get-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ")))
	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")
              (rmt:general-call 'set-test-start-time #f test-id)
	      (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      )
	     (else ;; (member (db:test-get-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ"))
	      (debug:print-error 0 *default-log-port* "test state is " (db:test-get-state test-info) ", cannot proceed")
	      (exit))))
	  
	  (debug:print 2 *default-log-port* "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  (debug:print 2 *default-log-port* "Executing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
	  ;; one of these is defunct/redundant ...
	  (if (not (launch:setup force-reread: #t))
	      (begin
		(debug:print 0 *default-log-port* "Failed to setup, exiting") 
		;; (sqlite3:finalize! db)

	  (list lnkpathf lnkpath ))
	(if (and test-src-path (> remtries 0))
	    (begin
	      (debug:print-error 0 *default-log-port* "Failed to create work area at " test-path " with link at " lnktarget ", remaining attempts " remtries)
	      ;; 
	      (create-work-area run-id run-info keyvals test-id test-src-path disk-path testname itemdat remtries: (- remtries 1)))
	    (list #f #f)))))


(define (launch:handle-zombie-tests run-id)
  (let* ((key (conc "zombiescan-runid-"run-id))
         (now (current-seconds))
         (threshold (- (current-seconds)  (* 2 (or (configf:lookup-number *configdat* "setup" "deadtime") 120))))
         (val (rmt:get-var key))
         (do-scan?
          (cond
           ((not val)
            #t)
           ((< val threshold)
            #t)
           (else #f))))
    (when do-scan?
      (debug:print 1 *default-log-port* "INFO: search and mark zombie tests")
      (rmt:set-var key (current-seconds))
      (rmt:find-and-mark-incomplete run-id #f))))





;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch

(define *send-receive-mutex* (make-mutex)) ;; should have separate mutex per run-id

;; RA => e.g. usage (rmt:send-receive 'get-var #f (list varname))
;;
(define (rmt:send-receive cmd rid params #!key (attemptnum 1)(area-dat #f)) ;; start attemptnum at 1 so the modulo below works as expected

  (common:telemetry-log (conc "rmt:"(->string cmd))
                        payload: `((rid . ,rid)
                                   (params . ,params)))
                          
  
  ;;DOT digraph megatest_state_status {
  ;;DOT   ranksep=0;
  ;;DOT   // rankdir=LR;
  ;;DOT   node [shape="box"];
  ;;DOT "rmt:send-receive" -> MUTEXLOCK;
  ;;DOT { edge [style=invis];"case 1" -> "case 2" -> "case 3" -> "case 4" -> "case 5" -> "case 6" -> "case 7" -> "case 8" -> "case 9" -> "case 10" -> "case 11"; }
  ;; do all the prep locked under the rmt-mutex

	  	  (debug:print-info 0 *default-log-port* "filtering initial test list with tagexpr: " (args:get-arg "-tagexpr") " => " allowed-tests)
		  ));; tests will be ANDed with this list

    ;; register this run in monitor.db
    (rmt:tasks-add "run-tests" user target runname test-patts task-key) ;; params)
    (rmt:tasks-set-state-given-param-key task-key "running")

    (common:telemetry-log "run-tests"
                          payload:
                          `( (target . ,target)
                             (run-name . ,runname)
                             (test-patts . ,test-patts) ) )

    
    ;; Now generate all the tests lists
    (set! all-tests-registry (tests:get-all))   ;; hash of testname => path-to-test
    (set! all-test-names     (hash-table-keys all-tests-registry))
    ;; filter first for allowed-tests (from -tagexpr) then for test-patts.
    (set! test-names         (tests:filter-test-names
			      (if allowed-tests
				  (tests:filter-test-names all-test-names allowed-tests)

     (begin  
      (debug:print-info 0 *default-log-port* "Calling Post Hook")  
      (debug:print-info 2 *default-log-port* " run-count " run-count)
      (runs:run-post-hook run-id))
      (debug:print-info 2 *default-log-port* "Not calling post hook runcount = " run-count ))   
    (rmt:tasks-set-state-given-param-key task-key "done")
    ;; (sqlite3:finalize! tasks-db)
    ))
    )))


;; loop logic. These are used in runs:run-tests-queue to make it a bit more readable.
;;
;; If reg not full and have items in tal then loop with (car tal)(cdr tal) reg reruns
;; If reg is full (i.e. length >= n
;;   loop with (car reg) tal (cdr reg) reruns

				    (loop (car tal)(cdr tal)))
                                  )
                                 ((member test-state (list "RUNNING" "LAUNCHED" "REMOTEHOSTSTART" "KILLREQ"))
                                  (debug:print 1 *default-log-port* "INFO: issuing killreq to test "test-fulln)
                                  (mt:test-set-state-status-by-id run-id (db:test-get-id test) "KILLREQ" "n/a" #f)
                                  (if (not (null? tal))
				      (loop (car tal)(cdr tal))))
;                                 ((and (member test-state (list "COMPLETED" "NOT_STARTED")) (member test-status "PREQ_FAIL" "PREQ_DISCARDED" "BLOCKED" "ZERO_ITEMS" "KEEP_TRYING" "TEN_STRIKES" "TIMED_OUT"))
;                                  (mt:test-set-state-status-by-id run-id (db:test-get-id test) "NOT_STARTED" "n/a" #f))
                                 (else
                                  (if (not (null? tal))
				      (loop (car tal)(cdr tal)))
                                  )))
			       ((set-state-status)
                                (let* ((new-state (car state-status))
                                       (new-status (cadr state-status))

                    (common:snapshot-file mtdbfile subdir: ".db-snapshot"))
		(delete-file* staging-file)
		(let* ((start-time (current-milliseconds))
                       (res (system sync-cmd)))
                  (cond
                   ((eq? 0 res)
		    (delete-file* (conc mtdbfile ".backup"))
                    (if (eq? 0 (file-size sync-log))
                        (delete-file sync-log))
		    (system (conc "/bin/mv " staging-file " " mtdbfile))
                    (debug:print 1 *default-log-port* "INFO: ["(common:human-time)"] pid="(current-process-id)" SYNC took "(/ (- (current-milliseconds) start-time) 1000)" sec")
                    #t)
                   (else
                    (system (conc "/bin/cp "sync-log" "sync-log".fail"))
                    (debug:print 0 *default-log-port* "ERROR: ["(common:human-time)"] Sync failed. See log at "sync-log".fail")
                    (if (file-exists? (conc mtdbfile ".backup"))

#!/usr/bin/env python
# -*- Mode: Python; -*- 
## Tiny Syslog Server in Python.
##
## This is a tiny syslog server that is able to receive UDP based syslog
## entries on a specified port and save them to a file.
## That's it... it does nothing else...

 
import os
import sys, os, time, atexit
from signal import SIGTERM
import logging
import logging.handlers
import SocketServer
import datetime
from subprocess import call
import argparse
import os
import socket

## code to determine this host's IP on non-loopback interface
if os.name != "nt":
    import fcntl
    import struct

    def get_interface_ip(ifname):
        s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
        return socket.inet_ntoa(fcntl.ioctl(s.fileno(), 0x8915, struct.pack('256s',
                                ifname[:15]))[20:24])

def get_lan_ip():
    ip = socket.gethostbyname(socket.gethostname())
    if ip.startswith("127.") and os.name != "nt":
        interfaces = [
            "eth0",
            "eth1",
            "eth2",
            "wlan0",
            "wlan1",
            "wifi0",
            "ath0",
            "ath1",
            "ppp0",
            ]
        for ifname in interfaces:
            try:
                ip = get_interface_ip(ifname)
                break
            except IOError:
                pass
    return ip

class Daemon(object):
        """
        A generic daemon class.
       
        Usage: subclass the Daemon class and override the run() method
        """
        def __init__(self, pidfile, stdin='/dev/null', stdout='/dev/null', stderr='/dev/null'):
                self.stdin = stdin
                self.stdout = stdout
                self.stderr = stderr
                self.pidfile = pidfile
       
        def daemonize(self):
                """
                do the UNIX double-fork magic, see Stevens' "Advanced
                Programming in the UNIX Environment" for details (ISBN 0201563177)
                http://www.erlenstar.demon.co.uk/unix/faq_2.html#SEC16
                """
                try:
                        pid = os.fork()
                        if pid > 0:
                                # exit first parent
                                sys.exit(0)
                except OSError, e:
                        sys.stderr.write("fork #1 failed: %d (%s)\n" % (e.errno, e.strerror))
                        sys.exit(1)
       
                # decouple from parent environment
                os.chdir("/")
                os.setsid()
                os.umask(0)
       
                # do second fork
                try:
                        pid = os.fork()
                        if pid > 0:
                                # exit from second parent
                                sys.exit(0)
                except OSError, e:
                        sys.stderr.write("fork #2 failed: %d (%s)\n" % (e.errno, e.strerror))
                        sys.exit(1)
       
                # redirect standard file descriptors
                sys.stdout.flush()
                sys.stderr.flush()
                si = file(self.stdin, 'r')
                so = file(self.stdout, 'a+')
                se = file(self.stderr, 'a+', 0)
                os.dup2(si.fileno(), sys.stdin.fileno())
                os.dup2(so.fileno(), sys.stdout.fileno())
                os.dup2(se.fileno(), sys.stderr.fileno())
       
                # write pidfile
                atexit.register(self.delpid)
                pid = str(os.getpid())
                file(self.pidfile,'w+').write("%s\n" % pid)
       
        def delpid(self):
                os.remove(self.pidfile)
 
        def start(self):
                """
                Start the daemon
                """
                # Check for a pidfile to see if the daemon already runs
                try:
                        pf = file(self.pidfile,'r')
                        pid = int(pf.read().strip())
                        pf.close()
                except IOError:
                        pid = None
       
                if pid:
                        message = "pidfile %s already exist. Daemon already running?\n"
                        sys.stderr.write(message % self.pidfile)
                        sys.exit(1)
               
                # Start the daemon
                self.daemonize()
                self.run()
 
        def stop(self):
                """
                Stop the daemon
                """
                # Get the pid from the pidfile
                try:
                        pf = file(self.pidfile,'r')
                        pid = int(pf.read().strip())
                        pf.close()
                except IOError:
                        pid = None
       
                if not pid:
                        message = "pidfile %s does not exist. Daemon not running?\n"
                        sys.stderr.write(message % self.pidfile)
                        return # not an error in a restart
 
                # Try killing the daemon process       
                try:
                        while 1:
                                os.kill(pid, SIGTERM)
                                time.sleep(0.1)
                except OSError, err:
                        err = str(err)
                        if err.find("No such process") > 0:
                                if os.path.exists(self.pidfile):
                                        os.remove(self.pidfile)
                        else:
                                print str(err)
                                sys.exit(1)
 
        def restart(self):
                """
                Restart the daemon
                """
                self.stop()
                self.start()
 
        def run(self):
                """
                You should override this method when you subclass Daemon. It will be called after the process has been
                daemonized by start() or restart().
                """

# setup logging module so that the log can be moved aside and will reopen for append
def log_setup(logfile):
    log_handler = logging.handlers.WatchedFileHandler(logfile)
    formatter = logging.Formatter(
        '%(message)s','')
    log_handler.setFormatter(formatter)
    logger = logging.getLogger()
    logger.addHandler(log_handler)
    logger.setLevel(logging.INFO)


class SyslogUDPHandler(SocketServer.BaseRequestHandler):
	def handle(self):
		data = bytes.decode(self.request[0].strip())
		socket = self.request[1]
		print( "%s : " % self.client_address[0], str(data))
		timestamp = datetime.datetime.now().isoformat()
		logline = timestamp + ":"+self.client_address[0] + ":" + str(data)
		logging.info(str(logline))



class TelemetryLogDaemon(Daemon):
  def __init__(self, pidfile, logfile, server_ip, server_port):
    self.logfile = logfile
    self.server_ip = server_ip
    self.server_port = server_port
    super(TelemetryLogDaemon, self).__init__(pidfile)
    
  def run(self):
    log_setup(self.logfile)
    server = SocketServer.UDPServer((self.server_ip,int(self.server_port)), SyslogUDPHandler)
    server.serve_forever(poll_interval=0.5)


def main():
  default_log_file = os.environ['PWD'] + "/telemetry.log"

  parser = argparse.ArgumentParser(description = 'telemetry-daemon')
  actions="start,restart,stop,nodaemon".split(",")
  
  parser.add_argument("-a", "--action", required=True, choices=actions, help="manage daemon: start stop or restart")
  parser.add_argument("-p", "--server-port", default="5929", help="specify alternate udp port number, default is 5929")
  parser.add_argument("-i", "--server-ip", default=get_lan_ip(), help="specify IP if heuristics to get local host lan ip fails")
  parser.add_argument("-l", "--log-file", default=default_log_file, help="specify log file to write")
  parser.add_argument("-z", "--pid-file", default=default_log_file + ".pidfile", help="specify pidfile")
  opts = parser.parse_args()

  tld = TelemetryLogDaemon(opts.pid_file, opts.log_file, opts.server_ip, opts.server_port)

  if opts.action == "start":
    print "Info: Starting server"
    print """Example addition to megatest.config to enable telemetry:

[telemetry]
host %s
port %s
want-events ALL

    """ % (opts.server_ip, opts.server_port)
    tld.start()
    
  elif opts.action == "stop":
    tld.stop()
  elif opts.action == "restart":

    print "Info: Restarting server"
    print """Example addition to megatest.config to enable telemetry:

[telemetry]
host %s
port %s
want-events ALL

    """ % (opts.server_ip, opts.server_port)
    tld.restart()
  elif opts.action == "nodaemon":
    log_setup(opts.log_file)
    server = SocketServer.UDPServer((opts.server_ip,int(opts.server_port)), SyslogUDPHandler)
    server.serve_forever(poll_interval=0.5)
  
if __name__ == '__main__':
  main()

      #f))

;; if .testconfig exists in test directory read and return it
;; else if have cached copy in *testconfigs* return it IFF there is a section "have fulldata"
;; else read the testconfig file
;;   if have path to test directory save the config as .testconfig and return it
;;
(define (tests:get-testconfig test-name item-path test-registry system-allowed #!key (force-create #f)(allow-write-cache #t))
(define (tests:get-testconfig test-name item-path test-registry system-allowed #!key (force-create #f)(allow-write-cache #t)(wait-a-minute #f))
  (let* ((use-cache    (common:use-cache?))
	 (cache-path   (tests:get-test-path-from-environment))
	 (cache-file   (and cache-path (conc cache-path "/.testconfig")))
	 (cache-exists (and cache-file
			    (not force-create)  ;; if force-create then pretend there is no cache to read
			    (common:file-exists? cache-file)))
	 (cached-dat   (if (and (not force-create)

	  (if (and  dat ;; have a locally cached version
		    (hash-table-ref/default dat "have fulldata" #f)) ;; marked as good data?
	      dat
	      ;; no cached data available
	      (let* ((treg         (or test-registry
				       (tests:get-all)))
		     (test-path    (or (hash-table-ref/default treg test-name #f)
                                       (let* ((local-tcdir (conc (getenv "MT_LINKTREE") "/"
                                                                 (getenv "MT_TARGET") "/"
                                                                 (getenv "MT_RUNNAME") "/"
                                                                 test-name "/" item-path))
                                              (local-tcfg (conc local-tcdir "/testconfig")))
                                         (if (common:file-exists? local-tcfg)
                                             local-tcdir
                                             #f))
				       (conc *toppath* "/tests/" test-name)))
		     (test-configf (conc test-path "/testconfig"))
		     (testexists   (let loopa ((tries-left 30))
                                     (cond
                                      (
		     (testexists   (and (common:file-exists? test-configf)(file-read-access? test-configf)))
                                       (and (common:file-exists? test-configf)(file-read-access? test-configf))
                                       #t)
                                      (
                                       (common:file-exists? test-configf)
                                       (debug:print 0 *default-log-port* "WARNING: Cannot read testconfig file: "test-configf)
                                       #f)
                                      (
                                       (and wait-a-minute (> tries-left 0))
                                       (thread-sleep! 10)
                                       (debug:print 0 *default-log-port* "WARNING: testconfig file does not exist: "test-configf" will retry in 10 seconds.  Tries left: "tries-left) ;; BB: this fires
                                       (loopa (sub1 tries-left)))
                                      (else
                                       (debug:print 0 *default-log-port* "WARNING: testconfig file does not exist: "test-configf) ;; BB: this fires
                                       #f))))
		     (tcfg         (if testexists
				       (read-config test-configf #f system-allowed
						    environ-patt: (if system-allowed
								      "pre-launch-env-vars"
								      #f))
				       #f)))
		(if (and tcfg cache-file) (hash-table-set! tcfg "have fulldata" #t)) ;; mark this as fully read data
		(if tcfg (hash-table-set! *testconfigs* test-full-name tcfg))
		(if (and testexists
			 cache-file
			 (file-write-access? cache-path)
			 allow-write-cache)
		    (let ((tpath (conc cache-path "/.testconfig")))
		      (debug:print-info 1 *default-log-port* "Caching testconfig for " test-name " in " tpath)
                      (if (not (common:in-running-test?))
                      (if (and tcfg (not (common:in-running-test?)))
                          (configf:write-alist tcfg tpath))))
		tcfg))))))
  
;; sort tests by priority and waiton
;; Move test specific stuff to a test unit FIXME one of these days
(define (tests:sort-by-priority-and-waiton test-records)
  (if (eq? (hash-table-size test-records) 0)