Megatest

;;======================================================================
;; Copyright 2006-2013, Matthew Welland.
;; 
;; This file is part of Megatest.
;; 
;;     Megatest is free software: you can redistribute it and/or modify
;;     it under the terms of the GNU General Public License as published by

				   cmd-in
				   (string->symbol cmd-in)))
            (params            (vector-ref dat 1))
            (start-t           (current-milliseconds))
            (readonly-mode     (dbr:dbstruct-read-only dbstruct))
            (readonly-command  (member cmd api:read-only-queries))
            (writecmd-in-readonly-mode (and readonly-mode (not readonly-command)))
            #;(foo               (begin
                                 (common:telemetry-log (conc "api-in:"(->string cmd))
                                                       payload: `((params . ,params)))
                                 
                                 #t))
            (res    
             (if writecmd-in-readonly-mode
                 (conc "attempt to run write command "cmd" on a read-only database")

       ;; save all stats
       (let ((delta-t (- (current-milliseconds)
			 start-t)))
	 (hash-table-set! *db-api-call-time* cmd
			  (cons delta-t (hash-table-ref/default *db-api-call-time* cmd '()))))
       (if writecmd-in-readonly-mode
           (begin
             #;(common:telemetry-log (conc "api-out:"(->string cmd))
                                   payload: `((params . ,params)
                                              (ok-res . #t)))
	     (vector #f res))
           (begin
             #;(common:telemetry-log (conc "api-out:"(->string cmd))
                                   payload: `((params . ,params)
                                              (ok-res . #f)))
             (vector #t res))))))))

;; http-server  send-response
;;                 api:process-request
;;                    db:*
;;
;; NB// Runs on the server as part of the server loop
;;
(define (api:process-request dbstruct $) ;; the $ is the request vars proc
  (set! *api-process-request-count* (+ *api-process-request-count* 1))
  (debug:print 4 *default-log-port* "server-id:"  *server-id*)
  (let* ((cmd     ($ 'cmd))
	 (paramsj ($ 'params))
         (key     ($ 'key))   
	 (params  (db:string->obj paramsj transport: 'http))) ;; incoming data from the POST (or is it a GET?)
    (debug:print 4 *default-log-port* "cmd:" cmd " with params " params "key " key)
    (if (equal? key *server-id*)
	(let* ((resdat  (api:execute-requests dbstruct (vector cmd params))) ;; process the request, resdat = #( flag result )
	       (success (vector-ref resdat 0))
	       (res     (vector-ref resdat 1))) ;; (vector flag payload), get the payload, ignore the flag (why?)
	  (debug:print 4 *default-log-port* "res:" res)
	  (if (not success)
	      (debug:print 0 *default-log-port* "ERROR: success flag is #f for " cmd " with params " params))
	  (if (> *api-process-request-count* *max-api-process-requests*)
	      (set! *max-api-process-requests* *api-process-request-count*))
	  (set! *api-process-request-count* (- *api-process-request-count* 1))
	  ;; This can be here but needs controls to ensure it doesn't run more than every 4 seconds
	  ;; (rmt:dat->json-str
	  ;;  (if (or (string? res)
	  ;;          (list?   res)
	  ;;          (number? res)
	  ;;          (boolean? res))
	  ;;      res 
	  ;;      (list "ERROR, not string, list, number or boolean" 1 cmd params res)))))
	  (db:obj->string res transport: 'http))
	(begin
	  (debug:print 0 *default-log-port*   "Server refused to process request. Sever id mismatch. recived " key " expected:  " *server-id* ".\nOther arguments recived: cmd=" cmd " params = " params) 
	  (db:obj->string (conc "Server refused to process request server-id mismatch: " key ", " *server-id*) transport: 'http)))))

              (debug:print-info 1 *default-log-port* "creating triggers after updating linktree")   
       (rmt:create-all-triggers)
))  

(define (archive:ls->list  bup-exe archive-dir internal-path)
  (let ((cmd (conc bup-exe " -d " archive-dir  " ls -l " internal-path "| awk '{print $6}' | sort"))
        (res '()))
    (debug:print-info 0 *default-log-port* cmd)
    (handle-exceptions
     exn
     #f ;; anything goes wrong - assume the process in NOT running.
     (with-input-from-pipe 
      cmd
      (lambda ()
	(let* ((inl (read-lines)))

(define (seconds->std-time-str sec)
  (time->string 
   (seconds->local-time sec)
   "%Y-%m-%d-%H%M%S"))
 

(define (archive:get-timestamp-dir bup-exe archive-dir testsuite-name run-id test-partial-path test-last-update)
    (debug:print-info 0 *default-log-port* "Test last update time:" (seconds->std-time-str test-last-update)) 
    (let* ((internal-path (conc testsuite-name "-" run-id))
           (archive-update-delay (string->number (or (configf:lookup *configdat* "archive" "test-update-delay") "900" )))  
           (ts-list (archive:ls->list  bup-exe archive-dir internal-path))
           (ds-flag (vector-ref (seconds->local-time) 8)))
           (let loop ((hed (car ts-list))
                       (tail (cdr ts-list)))
                   (if (and (null? tail) (equal? hed "latest"))
                        #f
                    (if (and (not (null? tail)) (equal? hed "latest"))
                        (loop (car tail) (cdr tail))
                  (let* ((archive-seconds (time-string->seconds hed ds-flag)))
                    (if (< (abs (- archive-seconds test-last-update)) archive-update-delay)
                    (let* ((test-list (archive:ls->list  bup-exe archive-dir (conc internal-path "/" hed "/" test-partial-path))))
                           (if (> (length test-list) 0)
                               hed
                               (if (not (null? tail)) 
                                 (loop (car tail) (cdr tail))
                                 #f)))
                       (if (null? tail)

	      (include-paths           (args:get-arg "-include"))
	      (exclude-pattern         (args:get-arg "-exclude-rx"))
	      (exclude-file            (args:get-arg "-exclude-rx-from")))
	 (if (not archive-timestamp-dir)
               (debug:print-error 0 *default-log-port* "Archive not found for testsuite" (common:get-testsuite-name) " run/test/itempath" test-partial-path)
         (begin    
	 ;; some sanity checks, move an existing path out of the way - iif it is not a toplevel with children
         (debug:print-info 0 *default-log-port* "Archive time: " archive-timestamp-dir)
	 (if (and (not toplevel/children)  ;; special handling needed for toplevel with children
		  prev-test-physical-path
		  (common:file-exists? prev-test-physical-path)) ;; what to do? abort or clean up or link it in?
	     (let* ((base (pathname-directory prev-test-physical-path))
		    (dirn (pathname-file      prev-test-physical-path))
		    (newn (conc base "/." dirn)))
	       (debug:print-error 0 *default-log-port* "the old directory " prev-test-physical-path ", still exists! Moving it to " newn)

      ;; through them searching for a good one.
      ;;
      (let* ((server-dat (server:get-rand-best areapath)) ;; (server:get-first-best areapath))
	     (runremote  (or area-dat *runremote*)))
	(if (not server-dat) ;; no server found
	    (client:setup-http areapath remaining-tries: (- remaining-tries 1))
	    (let ((host  (cadr  server-dat))
		  (port  (caddr server-dat))
                  (server-id (caddr (cddr server-dat))))
	      (debug:print-info 4 *default-log-port* "client:setup server-dat=" server-dat ", remaining-tries=" remaining-tries)
	      (if (and (not area-dat)
		       (not *runremote*))
                  (begin       
		    (set! *runremote* (make-remote))
                    (let* ((server-info (remote-server-info *runremote*))) 
                      (if server-info
                        (begin
                          (remote-server-url-set! *runremote* (server:record->url server-info))
                          (remote-server-id-set! *runremote* (server:record->id server-info)))))))
	      (if (and host port server-id)
		  (let* ((start-res (case *transport-type*
				      ((http)(http-transport:client-connect host port server-id))))
			 (ping-res  (case *transport-type* 
				      ((http)(rmt:login-no-auto-client-setup start-res)))))
		    (if (and start-res
			     ping-res)
			(let ((runremote (or area-dat *runremote*))) ;; it might have been generated only a few statements ago
			  (remote-conndat-set! runremote start-res) ;; (hash-table-set! runremote run-id start-res)
			  (debug:print-info 2 *default-log-port* "connected to " (http-transport:server-dat-make-url start-res))

    (else "FAIL")))

(define (common:logpro-exit-code->test-status exit-code)
  (status-sym->string (common:logpro-exit-code->status-sym exit-code)))

(defstruct remote
  (hh-dat            (common:get-homehost)) ;; homehost record ( addr . hhflag )
  (server-url        #f) ;; (server:check-if-running *toppath*) #f))
  (server-id         #f)
  (server-info       (if *toppath* (server:check-if-running *toppath*)))
  (last-server-check 0)  ;; last time we checked to see if the server was alive
  (conndat           #f)
  (transport         *transport-type*)
  (server-timeout    (server:expiration-timeout))
  (force-server      #f)
  (ro-mode           #f)  
  (ro-mode-checked   #f)) ;; flag that indicates we have checked for ro-mode

				   (lambda (a b)
				     (< (hash-table-ref all-files a)(hash-table-ref all-files b))))
			     (- num-logs max-allowed))))
	    (for-each
	     (lambda (file)
	       (let* ((fullname (conc "logs/" file)))
		 (if (directory? fullname)
		     (debug:print-info 0 *default-log-port* fullname " in logs directory is a directory! Cannot rotate it, it is best to not put subdirectories in the logs dir.")
		     (handle-exceptions
		      exn
		      (debug:print-error 0 *default-log-port* "failed to remove " fullname ", exn=" exn)
		      (delete-file* fullname)))))
	     files)
	    (debug:print-info 0 *default-log-port* "Deleted " (length files) " files from logs, keeping " max-allowed " files."))))))
  

	     (begin
	       (debug:print 0 *default-log-port* "joining threads failed. exn=" exn)
               #t) ;; just ignore it, it might have died in the meantime so joining it will throw an exception
             (thread-join! thread))
           )))
   (hash-table-keys *common:thread-punchlist*)))

#;(define *common:telemetry-log-state* 'startup)
#;(define *common:telemetry-log-socket* #f)

#;(define (common:telemetry-log-open)
  (if (eq? *common:telemetry-log-state* 'startup)
      (let* ((serverhost (configf:lookup *configdat* "telemetry" "host"))
             (serverport (configf:lookup-number *configdat* "telemetry" "port"))
             (user (or (get-environment-variable "USER") "unknown"))
             (host (or (get-environment-variable "HOST") "unknown")))
        (set! *common:telemetry-log-state*
              (handle-exceptions
               exn
               (begin
                 (debug:print-info 0 *default-log-port* "common-telemetry-log open udp port failure")
                 'broken)
               (if (and serverhost serverport user host)
                   (let* ((s (udp-open-socket)))
                     ;;(udp-bind! s #f 0)
                     (udp-connect! s serverhost serverport)
                     (set! *common:telemetry-log-socket* s)
                     'open)
                   'not-needed))))))
  
#;(define (common:telemetry-log event #!key (payload '()))
  (if (eq? *common:telemetry-log-state* 'startup)
      (common:telemetry-log-open))

  (if (eq? 'open *common:telemetry-log-state*)
      (handle-exceptions
       exn
       (begin

                   (base64:base64-encode
                    (z3:encode-buffer
                     (with-output-to-string (lambda () (pp payload))))))
                  (msg     (conc user":"host":"start":"(current-process-id)":"(car (argv))":"
                                 toppath":"payload-serialized)))
             (udp-send *common:telemetry-log-socket* msg))))))
  
#;(define (common:telemetry-log-close)
  (when (or (member *common:telemetry-log-state* '(broken-or-no-server-preclose open)) *common:telemetry-log-socket*)
    (handle-exceptions
     exn
     (begin
       (define *common:telemetry-log-state* 'closed-fail)
       (debug:print-info 0 *default-log-port* "common-telemetry-log closure failure")
       )
     (begin
       (define *common:telemetry-log-state* 'closed)
       (udp-close-socket *common:telemetry-log-socket*)
       (set! *common:telemetry-log-socket* #f)))))

                              id           INTEGER PRIMARY KEY,
                              test_id      INTEGER,
                              state        TEXT DEFAULT 'new',
                              status       TEXT DEFAULT 'n/a',
                              archive_type TEXT DEFAULT 'bup',
                              du           INTEGER,
                              archive_path TEXT);")))
         ;; (print "creating trigges from init") 
        (db:create-triggers db)    
     db)) ;; )

;;======================================================================
;; A R C H I V E S
;;======================================================================

;;    ;; 	(db:general-call dbdat 'state-status-msg (list state status msg test-id))
;;    ;; 	(db:general-call dbdat 'state-status     (list state status test-id)))
;;    (db:set-state-status-and-roll-up-items dbstruct run-id test-id #f state status msg)
;;    ;; process the test_data table
;;    (if (and test-id state status (equal? status "AUTO")) 
;; 	(db:test-data-rollup dbstruct run-id test-id status))
;;    (mt:process-triggers dbstruct run-id test-id state status)))

;; NOT FINISHED 
(define (db:calc-state-status-toplevel state status tl-state tl-status)
  `(,state ,status))

;;   (match state
;;     (("COMPLETED")
;;      (match `(,tl-state ,tl-status)
;;        (("COMPLETED" "PASS") `(,state ,status))
;;        (("COMPLETED" thestatus)
;; 	(case (string->symbol thestatus)
;; 	  ((ABORT CHECK DEAD)
;; 	   (if `("COMPLETED" ,thestatus))
;; 	(match `(,thestatus ,status)
;; 	  (("FAIL" "ABORT") '("COMPLETED" "ABORT"))
;; 	  (("FAIL" "CHECK") '("COMPLETED" "CHECK"))
;; 	  (("FAIL" "DEAD")  '("COMPLETED" "DEAD"))
;; 	  (("WARN" "FAIL")  '("COMPLETED" "FAIL"))
;; 	  (("WARN" "CHECK") '("COMPLETED" "CHECK"))
;; 	  (("WARN" "DEAD")
       
(define (db:set-state-status-and-roll-up-items dbstruct run-id test-name item-path state status comment)
  ;; establish info on incoming test followed by info on top level test
  ;; BBnote - for mode itemwait, linkage between upstream test & matching item status is propagated to run queue in db:prereqs-not-met
  ;; (mutex-lock! *db-transaction-mutex*) ;; why do we need a mutex?
  (let* ((testdat      (if (number? test-name)
			   (db:get-test-info-by-id dbstruct run-id test-name) ;; test-name is actually a test-id
			   (db:get-test-info       dbstruct run-id test-name item-path)))
	 (test-id      (db:test-get-id testdat))
	 (test-name    (if (number? test-name)
			   (db:test-get-testname testdat)
			   test-name))
	 (no-sync-db   (db:no-sync-db #f))
	 (rollup-flag  #f)
	 (wait-flag    #f)
	 (rollup-lock-key  (conc run-id "-rollup-" test-name))
	 (waiting-lock-key (conc run-id "-waiting-" test-name)))
    (db:test-set-state-status dbstruct run-id test-id state status #f)
    (if (and test-id state status (equal? status "AUTO")) 
	(db:test-data-rollup dbstruct run-id test-id status))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
	(db:general-call dbstruct 'set-test-start-time (list test-id)))

    (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
	(begin
	  ;; is there a rollup lock? If not, take it
	  (sqlite3:with-transaction
	   no-sync-db
	   (lambda ()
	     (handle-exceptions
	      exn
	      (debug:print 0 *default-log-port* "EXCEPTION: exn="exn)
	      (let* ((rollup-lock-time (db:no-sync-get/default no-sync-db rollup-lock-key #f))
		     (waiting-lock-time (db:no-sync-get/default no-sync-db waiting-lock-key #f)))
		(if rollup-lock-time ;; someone is doing a rollup
		    (if (not waiting-lock-time) ;; no one is waiting
			(begin
			  (set! wait-flag #t)
			  (set! rollup-flag #t)
			  (db:no-sync-set no-sync-db waiting-lock-key (current-seconds)))) ;; we are going to wait
		    (begin
		      (set! rollup-flag #t)
		      (db:no-sync-set no-sync-db rollup-lock-key (current-seconds)))))))
	   (if wait-flag
	       (let loop ((count 100))
		 (thread-sleep! 2)
		 (if (and (not (db:no-sync-get/default no-sync-db waiting-lock-key #f))
			  (> count 0))
		     (loop (+ count 1))
		     (sqlite3:with-transaction
		      no-sync-db
		      (lambda ()
			(db:no-sync-set no-sync-db rollup-lock-key (current-seconds))
			(db:no-sync-del! no-sync-db waiting-lock-key)))))))
	  ;; now the rollup
	  (if rollup-flag ;; put this into a thread
	      (thread-start! (make-thread
			      (lambda ()
				(db:roll-up-test-state-status dbstruct run-id test-name state status)
				(db:no-sync-del! no-sync-db rollup-flag))
			      (conc "thread for run-id: " run-id " test-name: " test-name))))))))

;; I'd like to remove the need for item-path - it is logically not needed here
;; for now we pass in state and status - NOTE: There is a possible race if a test
;; is rapidly re-run while an earlier run is waiting to rollup.
;;
(define (db:roll-up-test-state-status dbstruct run-id test-name state status)
  (let* ((testdat      (if (number? test-name)
			   (db:get-test-info-by-id dbstruct run-id test-name) ;; test-name is actually a test-id
			   (db:get-test-info       dbstruct run-id test-name "")))
	 (test-id      (db:test-get-id testdat))
	 (test-name    (if (number? test-name)
			   (db:test-get-testname testdat)
			   test-name))
	 (tl-testdat   (db:get-test-info dbstruct run-id test-name ""))
	 (tl-test-id   (db:test-get-id tl-testdat)))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       ;; NB// Pass the db so it is part fo the transaction
       ;; item-path is used in get-all-state-status counts to exclude current state/status of THIS test
       ;; but with the state/status being set earlier this is not needed any longer
       (let* ((state-status-counts  (db:get-all-state-status-counts-for-testname dbstruct run-id test-name))
	      (state-statuses       (db:roll-up-rules state-status-counts state status))
	      (newstate             (if (null? state-statuses)
					state
					(car state-statuses)))
	      (newstatus            (if (null? state-statuses)
					status
					(cadr state-statuses))))
	 (if tl-test-id
	     (db:test-set-state-status db run-id tl-test-id newstate newstatus #f))
	 )))
    #t))

;; state is the priority rollup of all states
;; status is the priority rollup of all completed statesfu
;;
;; if test-name is an integer work off that instead of test-name test-path
;;
(define (db:set-state-status-and-roll-up-items-orig dbstruct run-id test-name item-path state status comment)
  ;; establish info on incoming test followed by info on top level test
  ;; BBnote - for mode itemwait, linkage between upstream test & matching item status is propagated to run queue in db:prereqs-not-met
  (let* ((testdat      (if (number? test-name)
			   (db:get-test-info-by-id dbstruct run-id test-name) ;; test-name is actually a test-id
			   (db:get-test-info       dbstruct run-id test-name item-path)))
	 (test-id      (db:test-get-id testdat))
	 (test-name    (if (number? test-name)

    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                 ;; NB// Pass the db so it is part of the transaction
                 (db:test-set-state-status db run-id test-id state status comment) ;; this call sets the item state/status
                 (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
                     (let* ((state-status-counts  (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path state status)) ;; item-path is used to exclude current state/status of THIS test
			    (state-statuses        (db:roll-up-rules state-status-counts state status))
                          (newstate  (car state-statuses))
                          (newstatus (cadr state-statuses)))
                       (debug:print 4 *default-log-port* "BB> tl-test-id="tl-test-id" ; "test-name":"item-path" newstate="newstate" newstatus="newstatus" len(sscs)="(length state-status-counts)  " state-status-counts: "
							(apply conc
                  (map (lambda (x)
                     (conc
                     		(with-output-to-string (lambda () (pp (dbr:counts->alist x)))) " | "))
                              state-status-counts))); end debug:print
   
                       (if tl-test-id
			   (db:test-set-state-status db run-id tl-test-id newstate newstatus #f)) ;; we are still in the transaction - must access the db and not the dbstruct
		       ))))))
         (mutex-unlock! *db-transaction-mutex*)
         (if (and test-id state status (equal? status "AUTO")) 
             (db:test-data-rollup dbstruct run-id test-id status))
         tr-res)))))

(define (db:roll-up-rules state-status-counts state status)
  (let* ((running              (length (filter (lambda (x)
						 (member (dbr:counts-state x) *common:running-states*))
					       state-status-counts)))
	 (bad-not-started      (length (filter (lambda (x)
						 (and (equal? (dbr:counts-state x) "NOT_STARTED") 
						      (not (member (dbr:counts-status x)  *common:not-started-ok-statuses*))))
					       state-status-counts)))
	 (all-curr-states      (common:special-sort  ;; worst -> best (sort of)
				(delete-duplicates
				 (if (and state (not (member state *common:dont-roll-up-states*)))
				     (cons state (map dbr:counts-state state-status-counts))
				     (map dbr:counts-state state-status-counts)))
				*common:std-states* >))
	 (all-curr-statuses    (common:special-sort  ;; worst -> best
				(delete-duplicates
				 (if (and state status (not (member state *common:dont-roll-up-states*)))
				     (cons status (map dbr:counts-status state-status-counts))
				     (map dbr:counts-status state-status-counts)))
				*common:std-statuses* >))
	 (non-completes        (filter (lambda (x)
					 (not (member x (cons "COMPLETED" *common:dont-roll-up-states*))))
				       all-curr-states))
	 (preq-fails        (filter (lambda (x)
				      (equal? x "PREQ_FAIL"))
				    all-curr-statuses))
	 (num-non-completes (length non-completes))
	 (newstate          (cond
			     ((> running 0)             "RUNNING")            ;; anything running, call the situation running
			     ((> (length preq-fails) 0) "NOT_STARTED")
			     ((> bad-not-started 0)     "COMPLETED")          ;; we have an ugly situation, it is completed in the sense we cannot do more.
			     ((> num-non-completes 0)   (car non-completes))  ;;  (remove (lambda (x)(equal? "COMPLETED" x)) all-curr-states))) ;; only rollup DELETED if all DELETED
			     (else                      (car all-curr-states))))
	 (newstatus         (cond
			     ((> (length preq-fails) 0)  "PREQ_FAIL")
			     ((or (> bad-not-started 0)
				  (and (equal? newstate "NOT_STARTED")
				       (> num-non-completes 0)))
			      "STARTED")
			     (else (car all-curr-statuses)))))
    (debug:print-info 2 *default-log-port*
		      "\n--> probe db:set-state-status-and-roll-up-items: "
		      "\n--> state-status-counts: "(map dbr:counts->alist state-status-counts)
		      "\n--> running:             "running
		      "\n--> bad-not-started:     "bad-not-started
		      "\n--> non-non-completes:   "num-non-completes
		      "\n--> non-completes:       "non-completes
		      "\n--> all-curr-states:     "all-curr-states
                                         "\n--> all-curr-statuses:     "all-curr-statuses
                                         "\n--> newstate              "newstate
                                         "\n--> newstatus            "newstatus
                                         "\n\n")

    ;; NB// Pass the db so it is part of the transaction
    (list newstate newstatus)))

(define (db:set-state-status-and-roll-up-run dbstruct run-id curr-state curr-status)
    ;; (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                   (let* ((state-status-counts  (db:get-all-state-status-counts-for-run dbstruct run-id))
			  (state-statuses        (db:roll-up-rules state-status-counts #f #f ))
                          (newstate             (if (null? state-statuses)
						    curr-state
						    (car state-statuses)))
			  (newstatus            (if (null? state-status)
						    curr-status
						    (cadr state-statuses))))
                    (if (or (not (eq? newstate curr-state)) (not (eq?  newstatus curr-status)))
                   (db:set-run-state-status dbstruct run-id newstate newstatus )))))))
         ;; (mutex-unlock! *db-transaction-mutex*)
         tr-res))))


(define (db:get-all-state-status-counts-for-run dbstruct run-id)
 (let* ((test-count-recs (db:with-db
                                  dbstruct #f #f
                                  (lambda (db)

         (nonmatch-countrec-lambda (lambda (countrec) (not (match-countrec-lambda countrec))))
         
         (unrelated-rec-list   
          (filter nonmatch-countrec-lambda other-items-count-recs)))
    
    (cons updated-count-rec unrelated-rec-list)))

;; full count not including toplevel
;;
(define (db:get-all-state-status-counts-for-testname dbstruct run-id test-name)
  (let* ((test-count-recs (db:with-db
			   dbstruct #f #f
			   (lambda (db)
			     (sqlite3:map-row
			      (lambda (state status count)
				(make-dbr:counts state: state status: status count: count))
			      db
			      "SELECT state,status,count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' GROUP BY state,status;"
                                     run-id test-name)))))
    test-count-recs))


;; (define (db:get-all-item-states db run-id test-name)
;;   (sqlite3:map-row 
;;    (lambda (a) a)
;;    db
;;    "SELECT DISTINCT state FROM tests WHERE item_path != '' AND state != 'DELETED' AND run_id=? AND testname=?"
;;    run-id test-name))

			       flush
			       sync
			       set-verbosity
			       killserver
			       ))

(define (db:login dbstruct calling-path calling-version client-signature)
   (cond 
   ((not (equal? calling-path *toppath*))
    (list #f "Login failed due to mismatch paths: " calling-path ", " *toppath*))
   ;; ((not (equal? *run-id* run-id))
   ;;  (list #f "Login failed due to mismatch run-id: " run-id ", " *run-id*))
   ((not (equal? megatest-version calling-version))
    (list #t (conc "Login warning due to mismatch megatest version: " calling-version ", " megatest-version)))
   
    (else
    (hash-table-set! *logged-in-clients* client-signature (current-seconds))
    '(#t "successful login"))))

(define (db:general-call dbstruct stmtname params)
  (let ((query (let ((q (alist-ref (if (string? stmtname)
				       (string->symbol stmtname)
				       stmtname)

				 ;;    	 (iup:attribute-set! servers-matrix (conc "0:" colnum) colname)
				 ;;    	 (set! colnum (+ 1 colnum)))
				 ;;           colnames)
				 (set! rownum 1)
				 (for-each 
				  (lambda (server)
				    (set! colnum 0)
				    (match-let (((mod-time host port start-time server-id pid)
						 server))
				      (let* ((uptime  (- (current-seconds) mod-time))
					     (runtime (if start-time
							  (- mod-time start-time)
							  0))
					     (vals (list "-"  ;; (vector-ref server 0) ;; Id
							 "-"  ;; (vector-ref server 9) ;; MT-Ver

<div class="imageblock">
<div class="content">
<img src="megatest-system-architecture.png" alt="Static">
</div>
</div>
</div>
</div>
</div>
<div class="sect1">
<h2 id="_road_map">Road Map</h2>
<div class="sectionbody">
</div>
</div>
<div class="sect1">
<h2 id="_todo_road_map">TODO / Road Map</h2>
<div class="sectionbody">
<div class="paragraph"><p>Note: This road-map is a wish list and not a formal plan. Items are in
rough priority but are subject to change. Development is driven by
user requests, developer "itch" and bug reports. Please contact

</div>
<div class="sect1">
<h2 id="_installation">Installation</h2>
<div class="sectionbody">
<div class="sect2">
<h3 id="_dependencies">Dependencies</h3>
<div class="paragraph"><p>Chicken scheme and a number of "eggs" are required for building
Megatest. See the script installall.sh in the utils directory of the
source distribution for an automated way to install everything
needed for building Megatest on Linux.</p></div>
<div class="paragraph"><p>Megatest. In the v1.66 and beyond assistance to create the build
system is built into the Makefile.</p></div>
<div class="listingblock">
<div class="title">Installation steps (overview)</div>
<div class="content monospaced">
<pre>./configure
make chicken
setup.sh make -j install</pre>

<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced"></p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">( key1 key2 &#8230; )</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced"></p></td>
</tr>
</tbody>
</table>
</div>
</div>
<div class="sect1">
<h2 id="_test_plan">Test Plan</h2>
<div class="sectionbody">
<div class="sect2">
<h3 id="_tests">Tests</h3>
<div class="paragraph"><p>itemwait|33</p></div>
<div class="paragraph"><p>rerun-downstream-item|20</p></div>
<div class="paragraph"><p>rerunclean|20</p></div>
<div class="paragraph"><p>fullrun|18</p></div>
<div class="paragraph"><p>goodtests|18</p></div>
<div class="paragraph"><p>kill-rerun|17</p></div>
<div class="paragraph"><p>items-runconfigvars|16</p></div>
<div class="paragraph"><p>ro_test|16</p></div>
<div class="paragraph"><p>runconfig-tests|16</p></div>
<div class="paragraph"><p>env-pollution|13</p></div>
<div class="paragraph"><p>itemmap|11</p></div>
<div class="paragraph"><p>testpatt_envvar|10</p></div>
<div class="paragraph"><p>toprun|10</p></div>
<div class="paragraph"><p>chained-waiton|8</p></div>
<div class="paragraph"><p>skip-on-fileexists|8</p></div>
<div class="paragraph"><p>killrun_preqfail|7</p></div>
<div class="paragraph"><p>subrun|6</p></div>
<div class="paragraph"><p>dependencies|5</p></div>
<div class="paragraph"><p>itemwait-simple|4</p></div>
<div class="paragraph"><p>rollup|4</p></div>
<div class="paragraph"><p>end-of-run|3</p></div>
<div class="paragraph"><p>killrun|3</p></div>
<div class="paragraph"><p>listener|3</p></div>
<div class="paragraph"><p>test2|3</p></div>
<div class="paragraph"><p>testpatt|3</p></div>
<div class="paragraph"><p>env-pollution-usecacheno|2</p></div>
<div class="paragraph"><p>set-values|2
envvars|1
listruns-tests|1
subrun-usecases|1</p></div>
</div>
</div>
</div>
<div class="sect1">
<h2 id="_megatest_internals">Megatest Internals</h2>
<div class="sectionbody">
<div class="imageblock graphviz">
<div class="content">
<img src="server.png" alt="server.png">

</div>
</div>
</div>
<div id="footnotes"><hr></div>
<div id="footer">
<div id="footer-text">
Version 1.5<br>
Last updated 2020-09-08 08:39:29 PDT
</div>
</div>
</body>
</html>

// :leveloffset: 0

include::writing_tests.txt[]

include::howto.txt[]

include::reference.txt[]

include::testplan.txt[]

Megatest Internals
------------------

["graphviz", "server.png"]
----------------------------------------------------------------------
include::server.dot[]

// This file is part of Megatest.
// 
//     Megatest is free software: you can redistribute it and/or modify
//     it under the terms of the GNU General Public License as published by
//     the Free Software Foundation, either version 3 of the License, or
//     (at your option) any later version.
// 
//     Megatest is distributed in the hope that it will be useful,
//     but WITHOUT ANY WARRANTY; without even the implied warranty of
//     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
//     GNU General Public License for more details.
// 
//     You should have received a copy of the GNU General Public License
//     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

// Copyright 2006-2020, Matthew Welland.

Test Plan
---------

Tests
~~~~~

itemwait|33

rerun-downstream-item|20

rerunclean|20

fullrun|18

goodtests|18

kill-rerun|17

items-runconfigvars|16

ro_test|16

runconfig-tests|16

env-pollution|13

itemmap|11

testpatt_envvar|10

toprun|10

chained-waiton|8

skip-on-fileexists|8

killrun_preqfail|7

subrun|6

dependencies|5

itemwait-simple|4

rollup|4

end-of-run|3

killrun|3

listener|3

test2|3

testpatt|3

env-pollution-usecacheno|2

set-values|2
envvars|1
listruns-tests|1
subrun-usecases|1

			 (http-transport:server-dat-get-api-req serverdat)
			 (begin
			   (debug:print 0 *default-log-port* "FATAL ERROR: http-transport:client-api-send-receive called with no server info")
			   (exit 1))))
	 (res        (vector #f "uninitialized"))
	 (success    #t)
	 (sparams    (db:obj->string params transport: 'http))
	 (runremote  (or area-dat *runremote*))
         (server-id   (if (vector? serverdat) 
                           (http-transport:server-dat-get-server-id serverdat)
                           (begin
			     (debug:print 0 *default-log-port* "FATAL ERROR: http-transport:client-api-send-receive called with no server info")
			     (exit 1)))))
       (debug:print-info 11 *default-log-port* "cmd=" cmd " fullurl=" fullurl " server-id=" server-id " current time:" (current-seconds)) 

       ;; set up the http-client here
       (max-retry-attempts 1)
       ;; consider all requests indempotent
       (retry-request? (lambda (request)
			 #f))
       ;; send the data and get the response
       ;; extract the needed info from the http data and 

						    (msg        ((condition-property-accessor 'exn 'message) exn)))
						(set! success #f)
                                                (if (debug:debug-mode 1)
                                                    (debug:print-info 0 *default-log-port* "couldn't talk to server, trying again ...")
                                                    (begin
                                                      (debug:print 0 *default-log-port* "WARNING: failure in with-input-from-request to " fullurl ".")
                                                      (debug:print 0 *default-log-port* " message: " msg ", exn=" exn)
                                                      (debug:print 0 *default-log-port* " cmd: " cmd " params: " params " key:" (or server-id "thekey"))
                                                      (debug:print 0 *default-log-port* " call-chain: " call-chain)))
                                                (if runremote
						    (remote-conndat-set! runremote #f))
						;; Killing associated server to allow clean retry.")
						;; (tasks:kill-server-run-id run-id)  ;; better to kill the server in the logic that called this routine?
						(mutex-unlock! *http-mutex*)
					     ;;; (signal (make-composite-condition
					     ;;;          (make-property-condition 'commfail 'message "failed to connect to server")))
					     ;;; "communications failed"
						(db:obj->string #f))
					    (with-input-from-request ;; was dat
					     fullurl 
					     (list (cons 'key (or server-id "thekey"))
						   (cons 'cmd cmd)
						   (cons 'params sparams))
					     read-string))
					  transport: 'http)
                                         0)) ;; added this speculatively
			      ;; Shouldn't this be a call to the managed call-all-connections stuff above?
			      (close-all-connections!)
			      (mutex-unlock! *http-mutex*)
			      ))
	      (time-out     (lambda ()
			      (thread-sleep! 45)
			      (debug:print 0 *default-log-port* "WARNING: send-receive took more than 45 seconds!!")
			      #f))
	      (th1 (make-thread send-recieve "with-input-from-request"))
	      (th2 (make-thread time-out     "time out")))
	 (thread-start! th1)
	 (thread-start! th2)
	 (thread-join! th1)
          (vector-set! res 0 success)
	 (thread-terminate! th2)

	 (if (vector? res)
	     (if (vector-ref res 0) ;; this is the first flag or the second flag?
		 res ;; this is the *inner* vector? seriously? why?
                 (if (debug:debug-mode 11)
                     (let ((call-chain (get-call-chain))) ;; note: this code also called in nmsg-transport - consider consolidating it
                       (print-call-chain (current-error-port))
                       (debug:print-error 11 *default-log-port* "error above occured at server, res=" res) ;; " message: " ((condition-property-accessor 'exn 'message) exn))

(define (make-http-transport:server-dat)(make-vector 6))
(define (http-transport:server-dat-get-iface         vec)    (vector-ref  vec 0))
(define (http-transport:server-dat-get-port          vec)    (vector-ref  vec 1))
(define (http-transport:server-dat-get-api-uri       vec)    (vector-ref  vec 2))
(define (http-transport:server-dat-get-api-url       vec)    (vector-ref  vec 3))
(define (http-transport:server-dat-get-api-req       vec)    (vector-ref  vec 4))
(define (http-transport:server-dat-get-last-access   vec)    (vector-ref  vec 5))
;(define (http-transport:server-dat-get-socket        vec)    (vector-ref  vec 6))
(define (http-transport:server-dat-get-server-id     vec)    (vector-ref  vec 6))

(define (http-transport:server-dat-make-url vec)
  (if (and (http-transport:server-dat-get-iface vec)
	   (http-transport:server-dat-get-port  vec))
      (conc "http://" 
	    (http-transport:server-dat-get-iface vec)
	    ":"
	    (http-transport:server-dat-get-port  vec))
      #f))

(define (http-transport:server-dat-update-last-access vec)
  (if (vector? vec)
      (vector-set! vec 5 (current-seconds))
      (begin
	(print-call-chain (current-error-port))
	(debug:print-error 0 *default-log-port* "call to http-transport:server-dat-update-last-access with non-vector!!"))))

;;
;; connect
;;
(define (http-transport:client-connect iface port server-id) 
  (let* ((api-url      (conc "http://" iface ":" port "/api"))
	 (api-uri      (uri-reference (conc "http://" iface ":" port "/api")))
	 (api-req      (make-request method: 'POST uri: api-uri))
	 (server-dat   (vector iface port api-uri api-url api-req (current-seconds) server-id)))
    server-dat))

;; run http-transport:keep-running in a parallel thread to monitor that the db is being 
;; used and to shutdown after sometime if it is not.
;;
(define (http-transport:keep-running) 
  ;; if none running or if > 20 seconds since 

      
      (if (not (equal? sdat (list iface port)))
	  (let ((new-iface (car sdat))
		(new-port  (cadr sdat)))
	    (debug:print-info 0 *default-log-port* "WARNING: interface changed, refreshing iface and port info")
	    (set! iface new-iface)
	    (set! port  new-port)
             (if (not *server-id*)
              (set! *server-id* (server:mk-signature)))
            (debug:print 0 *default-log-port* (current-seconds) (current-directory) (current-process-id) (argv))
	    (debug:print 0 *default-log-port* "SERVER STARTED: " iface ":" port " AT " (current-seconds) " server-id: " *server-id*)
	    (flush-output *default-log-port*)))
      
      ;; Transfer *db-last-access* to last-access to use in checking that we are still alive
      (mutex-lock! *heartbeat-mutex*)
      (set! last-access *db-last-access*)
      (mutex-unlock! *heartbeat-mutex*)
      
      (if (common:low-noise-print 120 (conc "server running on " iface ":" port))
	  (begin
             (if (not *server-id*)
              (set! *server-id* (server:mk-signature)))
            (debug:print 0 *default-log-port* (current-seconds) (current-directory) (current-process-id) (argv))   
	    (debug:print 0 *default-log-port* "SERVER STARTED: " iface ":" port " AT " (current-seconds) " server-id: " *server-id*)
	    (flush-output *default-log-port*)))
      (if (common:low-noise-print 60 "dbstats")
	  (begin
	    (debug:print 0 *default-log-port* "Server stats:")
	    (db:print-current-query-stats)))
      (let* ((hrs-since-start  (/ (- (current-seconds) server-start-time) 3600)))
	(cond

    ;; (tests:set-full-meta-info test-id run-id (calc-minutes) work-area)
    (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area 10)

    (let loop ((minutes   (calc-minutes))
	       (cpu-load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
	       (disk-free (get-df (current-directory)))
               (last-sync (current-seconds)))
      ;; (common:telemetry-log "zombie" (conc "launch:monitor-job - top of loop encountered at "(current-seconds)" with last-sync="last-sync))
      (let* ((over-time     (> (current-seconds) (+ last-sync update-period)))
             (new-cpu-load  (let* ((load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
                                   (delta (abs (- load cpu-load))))
                              (if (> delta 0.1) ;; don't bother updating with small changes
                                  load
                                  #f)))
             (new-disk-free (let* ((df    (if over-time ;; only get df every 30 seconds

             (do-sync       (or new-cpu-load new-disk-free over-time))

             (test-info   (rmt:get-test-info-by-id run-id test-id))
             (state       (db:test-get-state test-info))
             (status      (db:test-get-status test-info))
             (kill-reason  "no kill reason specified")
             (kill-job?    #f))
        ;; (common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        (cond
         ((test-get-kill-request run-id test-id)
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))
          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" (- (current-seconds) start-seconds) " seconds, limit=" runtlim))
          (set! kill-job? #t))
         ((equal? status "DEAD")
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)
          (rmt:set-state-status-and-roll-up-items run-id test-id 'foo "RUNNING" "n/a" "was marked dead; really still running.")
          ;;(set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests (might indicate really overloaded server or else overzealous setup.deadtime)") ;; MARK RUNNING
          (set! kill-job? #f)))

        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)
        (launch:handle-zombie-tests run-id)
        (when do-sync
          ;;(with-output-to-file (conc (getenv "MT_TEST_RUN_DIR") "/last-loadinfo.log" #:append)
          ;;  (lambda () (pp (list (current-seconds) new-cpu-load new-disk-free (calc-minutes)))))
          ;; (common:telemetry-log "zombie" (conc  "launch:monitor-job - dosync started at "(current-seconds)))
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)
          #;(common:telemetry-log "zombie" (conc "launch:monitor-job - dosync finished at "(current-seconds))))
        
	(if kill-job? 
	    (begin
              (debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second

;;     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

;; Always use two or four digit decimal
;; 1.01, 1.02...1.10,1.11,1.1101 ... 1.99,2.00..

;; (declare (unit megatest-version))

(define megatest-version 1.6581)

      (if out-file (close-output-port out-port))
      (exit) ;; yes, bending the rules here - need to exit since this is a utility
      ))

(if (args:get-arg "-ping")
    (let* ((server-id     (string->number (args:get-arg "-ping"))) ;; extract run-id (i.e. no ":"
	   (host:port     (args:get-arg "-ping")))
      (server:ping (or server-id host:port) #f do-exit: #t)))

;;======================================================================
;; Capture, save and manipulate environments
;;======================================================================

;; NOTE: Keep these above the section where the server or client code is setup

		   (if last-time
		       (< (current-seconds)(+ last-time 5))
		       #f))))
    (if useres
	(let ((result (vector-ref res 1)))
	  (debug:print 4 *default-log-port* "Using lazy value res: " result)
	  result)
	(let ((newres (rmt:get-prereqs-not-met run-id waitons ref-item-path mode itemmaps)))
	  (hash-table-set! *pre-reqs-met-cache* key (vector (current-seconds) newres))
	  newres))))

(define (mt:get-run-stats dbstruct run-id)
;;  Get run stats from local access, move this ... but where?
  (db:get-run-stats dbstruct run-id))

    ;; DOT INIT_RUNREMOTE; // leaving off - doesn't really add to the clarity
    ;; DOT MUTEXLOCK -> INIT_RUNREMOTE [label="no remote?"];
    ;; DOT INIT_RUNREMOTE -> MUTEXLOCK;
    ;; ensure we have a record for our connection for given area
    (if (not runremote)                   ;; can remove this one. should never get here.         
	(begin
	  (set! *runremote* (make-remote))
          (let* ((server-info (remote-server-info *runremote*))) 
            (if server-info
		(begin
			(remote-server-url-set! *runremote* (server:record->url server-info))
			(remote-server-id-set! *runremote* (server:record->id server-info)))))  
	  (set! runremote   *runremote*))) ;; new runremote will come from this on next iteration
    
    ;; DOT SET_HOMEHOST; // leaving off - doesn't really add to the clarity
    ;; DOT MUTEXLOCK -> SET_HOMEHOST [label="no homehost?"];
    ;; DOT SET_HOMEHOST -> MUTEXLOCK;
    ;; ensure we have a homehost record
    (if (not (pair? (remote-hh-dat runremote)))  ;; not on homehost

     ;;DOT CASE6 [label="init\nremote"];
     ;;DOT MUTEXLOCK -> CASE6 [label="on homehost,\nwrite query,\nhave server,\ncan't reach it"]; {rank=same "case 6" CASE6};
     ;;DOT CASE6 -> "rmt:send-receive";
     ;; on homehost and this is a write, we already have a server, but server has died
     ((and (cdr (remote-hh-dat runremote))           ;; on homehost
           (not (member cmd api:read-only-queries))  ;; this is a write
           (remote-server-url runremote)             ;; have a server
           (not (server:ping (remote-server-url runremote) (remote-server-id runremote))))  ;; server has died. NOTE: this is not a cheap call! Need better approach.
      (set! *runremote* (make-remote))
      (let* ((server-info (remote-server-info *runremote*))) 
            (if server-info
		(begin
		  (remote-server-url-set! *runremote* (server:record->url server-info))
                  (remote-server-id-set! *runremote* (server:record->id server-info)))))
      (remote-force-server-set! runremote (common:force-server?))
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  6")
      (rmt:send-receive cmd rid params attemptnum: attemptnum))

     ;;DOT CASE7 [label="homehost\nwrite"];
     ;;DOT MUTEXLOCK -> CASE7 [label="server not required,\non homehost,\na write,\nhave a server"]; {rank=same "case 7" CASE7};

     ;;DOT CASE8 -> "rmt:open-qry-close-locally";
     ;;  on homehost, no server contact made and this is a write, passively start a server 
     ((and (not (remote-force-server runremote))     ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))           ;; have homehost
           (not (remote-server-url runremote))       ;; no connection yet
	   (not (member cmd api:read-only-queries))) ;; not a read-only query
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  8")
      (let ((server-info  (server:check-if-running *toppath*))) ;; (server:read-dotserver->url *toppath*))) ;; (server:check-if-running *toppath*))) ;; Do NOT want to run server:check-if-running - very expensive to do for every write call
	(if server-info
	    (begin
              (remote-server-url-set! runremote (server:record->url server-info)) ;; the string can be consumed by the client setup if needed
              (remote-server-id-set! runremote (server:record->id server-info)))  
	    (if (common:force-server?)
		(server:start-and-wait *toppath*)
		(server:kind-run *toppath*)))
      (remote-force-server-set! runremote (common:force-server?))
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  8.1")
      (rmt:open-qry-close-locally cmd 0 params)))

     ;;DOT CASE9 [label="force server\nnot on homehost"];
     ;;DOT MUTEXLOCK -> CASE9 [label="no connection\nand either require server\nor not on homehost"]; {rank=same "case 9" CASE9};
     ;;DOT CASE9 -> "start\nserver" -> "rmt:send-receive";
     ((or (and (remote-force-server runremote)              ;; we are forcing a server and don't yet have a connection to one
	       (not (remote-conndat runremote)))
	  (and (not (cdr (remote-hh-dat runremote)))        ;; not on a homehost 

(define (rmt:test-get-paths-matching-keynames-target-new keynames target res testpatt statepatt statuspatt runname)
  (let ((run-ids (rmt:get-run-ids-matching-target keynames target res runname testpatt statepatt statuspatt)))
    (apply append 
	   (map (lambda (run-id)
		  (rmt:send-receive 'test-get-paths-matching-keynames-target-new run-id (list run-id keynames target res testpatt statepatt statuspatt runname)))
	   run-ids))))

;; NOTE: rmt functions can NEVER have key params as they might be called as local
(define (rmt:get-prereqs-not-met run-id waitons ref-test-name ref-item-path mode itemmaps) ;; #!key (mode '(normal))(itemmaps #f))
  (rmt:send-receive 'get-prereqs-not-met run-id (list run-id waitons ref-test-name ref-item-path mode itemmaps)))

(define (rmt:get-count-tests-running-for-run-id run-id fastmode)
  (rmt:send-receive 'get-count-tests-running-for-run-id run-id (list run-id fastmode)))

(define (rmt:get-not-completed-cnt run-id)
  (rmt:send-receive 'get-not-completed-cnt run-id (list run-id)))

;;    => review of a previously seen test is higher priority of never visited test
;; reg - list of previously visited tests
;; tal - list of never visited tests
;;   prefer next hed to be from reg than tal.

(define runs:nothing-left-in-queue-count 0)

(define (runs:lazy-get-prereqs-not-met  testdat run-id waitons hed item-path #!key (mode '(normal))(itemmaps #f)) ;; mode: testmode itemmaps: itemmaps)
  (if (and (runs:testdat-prereqs-not-met testdat)
	   (< (- (current-seconds) (runs:testdat-last-update testdat)) 10)) ;; only refresh for this test if it has been at least 10 seconds
      (runs:testdat-prereqs-not-met testdat)
      (let* ((res (let ((res (rmt:get-prereqs-not-met run-id waitons hed item-path mode itemmaps)))
		    (if (list? res)
			res
			(begin
			  (debug:print 0 *default-log-port*
				       "ERROR: rmt:get-prereqs-not-met returned non-list!\n"
				       "  res=" res " run-id=" run-id " waitons=" waitons " hed=" hed " item-path=" item-path " testmode=" mode " itemmaps=" itemmaps)
			  '())))))

;;	         (tal         (cdr sorted-test-names))
;;	         (reg         '()) ;; registered, put these at the head of tal 
;;	         (reruns      '()))
(define (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record
			   can-run-more items runname tconfig reglen test-registry test-records itemmaps testdat)
  (let* ((loop-list       (list hed tal reg reruns))
	 (prereqs-not-met (runs:lazy-get-prereqs-not-met testdat run-id waitons hed item-path mode: testmode itemmaps: itemmaps))








	 (have-itemized   (not (null? (lset-intersection eq? testmode '(itemmatch itemwait)))))

	 (fails           (runs:calc-fails prereqs-not-met))
	 (prereq-fails    (runs:calc-prereq-fail prereqs-not-met))
	 (non-completed   (runs:calc-not-completed prereqs-not-met))
	 (runnables       (runs:calc-runnable prereqs-not-met))
         (unexpanded-prereqs
          (filter (lambda (testname)
                    (let* ((test-rec (hash-table-ref test-records testname))

	 (run-limits-info        (runs:dat-can-run-more-tests runsdat))
	 ;; (runs:can-run-more-tests run-id jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
	 (have-resources         (car run-limits-info))
	 (num-running            (list-ref run-limits-info 1))
	 (num-running-in-jobgroup(list-ref run-limits-info 2)) 
	 (max-concurrent-jobs    (list-ref run-limits-info 3))
	 (job-group-limit        (list-ref run-limits-info 4))


	 (fails                  (if (list? prereqs-not-met) ;; TODO: rename fails to failed-prereqs
				      (runs:calc-fails prereqs-not-met)
				      (begin
					(debug:print-error 0 *default-log-port* "prereqs-not-met is not a list! " prereqs-not-met)
					'())))
	 (non-completed           (filter (lambda (x)             ;; remove hed from not completed list, duh, of course it is not completed!
					    (not (equal? x hed)))

                   registry-mutex: registry-mutex
                   flags: flags
                   keyvals: keyvals
                   run-info: run-info
                   ;; newtal: newtal
                   all-tests-registry: all-tests-registry
                   ;; itemmaps: itemmaps

                   ;; can-run-more-tests: (runs:can-run-more-tests run-id jobgroup max-concurrent-jobs) ;; look at the test jobgroup and tot jobs running
                   )))

    ;; Initialize the test-registery hash with tests that already have a record
    ;; convert state to symbol and use that as the hash value
    (for-each (lambda (trec)
		(let ((id (db:test-get-id        trec))

	    
;; Generate a unique signature for this server
(define (server:mk-signature)
  (message-digest-string (md5-primitive) 
			 (with-output-to-string
			   (lambda ()
			     (write (list (current-directory)
                                          (current-process-id)
					  (argv)))))))

;; When using zmq this would send the message back (two step process)
;; with spiffy or rpc this simply returns the return data to be returned
;; 
(define (server:reply return-addr query-sig success/fail result)
  (debug:print-info 11 *default-log-port* "server:reply return-addr=" return-addr ", result=" result)

    (system (conc "nbfake " cmdln))
    (unsetenv "TARGETHOST_LOGF")
    (if (get-environment-variable "TARGETHOST")(unsetenv "TARGETHOST"))
    (thread-join! log-rotate)
    (pop-directory)))

;; given a path to a server log return: host port startseconds
;; any changes to number of elements returned by this fuction will dirctly affect server:record->url,server:record->id,server:kill,server:get-num-alive which uses match let 

(define (server:logf-get-start-info logf)
  (let ((rx (regexp "^SERVER STARTED: (\\S+):(\\d+) AT ([\\d\\.]+) server-id: (\\S+)"))) ;; SERVER STARTED: host:port AT timesecs server id
    (handle-exceptions
	exn
      (begin
	(print "failed to get server info from " logf ", exn=" exn)
	(list #f #f #f #f)) ;; no idea what went wrong, call it a bad server
      (with-input-from-file
	  logf
	(lambda ()
	  (let loop ((inl  (read-line))
		     (lnum 0))
	    (if (not (eof-object? inl))
		(let ((mlst (string-match rx inl)))
		  (if (not mlst)
		      (if (< lnum 500) ;; give up if more than 500 lines of server log read
			  (loop (read-line)(+ lnum 1))
			  (list #f #f #f #f))
		      (let ((dat  (cdr mlst)))
			(list (car dat) ;; host
			      (string->number (cadr dat)) ;; port
			      (string->number (caddr dat))
                              (cadr (cddr dat))))))
		(list #f #f #f #f))))))))

;; get a list of servers with all relevant data
;; ( mod-time host port start-time pid )
;;
(define (server:get-list areapath #!key (limit #f))
  (let ((fname-rx    (regexp "^(|.*/)server-(\\d+)-(\\S+).log$"))
	(day-seconds (* 24 60 60)))

	      '()
	      (let loop ((hed  (car server-logs))
			 (tal  (cdr server-logs))
			 (res '()))
		(let* ((mod-time  (handle-exceptions
				   exn
				   (begin
				     (debug:print 0 *default-log-port* "failed to get modification time on " hed ", exn=" exn)
				     (current-seconds)) ;; 0
				   (file-modification-time hed))) ;; default to *very* old so log gets ignored if deleted
		       (down-time (- (current-seconds) mod-time))
		       (serv-dat  (if (or (< num-serv-logs 10)
				  	  (< down-time 900)) ;; day-seconds))
				      (server:logf-get-start-info hed)
				      '())) ;; don't waste time processing server files not touched in the 15 minutes if there are more than ten servers to look at
		       (serv-rec (cons mod-time serv-dat))
		       (fmatch   (string-match fname-rx hed))
		       (pid      (if fmatch (string->number (list-ref fmatch 2)) #f))
		       (new-res  (if (null? serv-dat)
				     res
				     (cons (append serv-rec (list pid)) res)))) ;; any changes to number of elements in new-res will dirctly affect server:record->url,server:record->id,server:kill,server:get-num-alive which uses match let 
		  (if (null? tal)
		      (if (and limit
			       (> (length new-res) limit))
			  new-res ;; (take new-res limit)  <= need intelligent sorting before this will work
			  new-res)
		      (loop (car tal)(cdr tal) new-res)))))))))

(define (server:get-num-alive srvlst)
  (let ((num-alive 0))
    (for-each
     (lambda (server)
       (match-let (((mod-time host port start-time server-id pid)
		    server))
	 (let* ((uptime  (- (current-seconds) mod-time))
		(runtime (if start-time
			     (- mod-time start-time)
			     0)))
	   (if (< uptime 5)(set! num-alive (+ num-alive 1))))))
     srvlst)

    (if (and (list? srvrs)
	     (not (null? srvrs)))
	(let* ((len (length srvrs))
	       (idx (random len)))
	  (list-ref srvrs idx))
	#f)))

(define (server:record->id servr)
  (match-let (((mod-time host port start-time server-id pid)
	       servr))
    (if server-id
	server-id
	#f)))

(define (server:record->url servr)
  (match-let (((mod-time host port start-time server-id pid)
	       servr))
    (if (and host port)
	(conc host ":" port)
	#f)))

(define (server:get-client-signature) ;; BB> why is this proc named "get-"?  it returns nothing -- set! has not return value.
  (if *my-client-signature* *my-client-signature*

		  (common:simple-file-release-lock lock-file)))
	(hash-table-set! *server-kind-run* areapath (list (+ call-num 1)(current-seconds))))))

;; this one seems to be the general entry point
;;
(define (server:start-and-wait areapath #!key (timeout 60))
  (let ((give-up-time (+ (current-seconds) timeout)))
    (let loop ((server-info (server:check-if-running areapath))
	       (try-num    0))
      (if (or server-info
	      (> (current-seconds) give-up-time)) ;; server-url will be #f if no server available.
	  (server:record->url server-info)
	  (let ((num-ok (length (server:get-best (server:get-list areapath)))))
	    (if (and (> try-num 0)  ;; first time through simply wait a little while then try again
		     (< num-ok 1))  ;; if there are no decent candidates for servers then try starting a new one
		(server:kind-run areapath))
	    (thread-sleep! 5)
	    (loop (server:check-if-running areapath)
		  (+ try-num 1)))))))

(define server:try-running server:run) ;; there is no more per-run servers ;; REMOVE ME. BUG.

(define (server:get-num-servers #!key (numservers 2))
  (let ((ns (string->number
	     (or (configf:lookup *configdat* "server" "numservers") "notanumber"))))
    (or ns numservers)))

;; no longer care if multiple servers are started by accident. older servers will drop off in time.
;;
(define (server:check-if-running areapath) ;;  #!key (numservers "2"))
  (let* ((ns            (server:get-num-servers))
	 (servers       (server:get-best (server:get-list areapath))))

    (if (or (and servers
		 (null? servers))
	    (not servers)
	    (and (list? servers)
		 (< (length servers) (random ns)))) ;; somewhere between 0 and numservers
        #f
        (let loop ((hed (car servers))
                   (tal (cdr servers)))
          (let ((res (server:check-server hed)))
            (if res
                hed
                (if (null? tal)
                    #f
                    (loop (car tal)(cdr tal)))))))))

;; ping the given server
;;
(define (server:check-server server-record)
  (let* ((server-url (server:record->url server-record))
         (server-id (server:record->id server-record)) 
         (res        (case *transport-type*
                       ((http)(server:ping server-url server-id))
                       ;; ((nmsg)(nmsg-transport:ping (tasks:hostinfo-get-interface server)
                       )))
    (if res
        server-url
	#f)))

(define (server:kill servr)
  (match-let (((mod-time hostname port start-time pid)
	       servr))
    (tasks:kill-server hostname pid)))

;; called in megatest.scm, host-port is string hostname:port
;;
;; NOTE: This is NOT called directly from clients as not all transports support a client running
;;       in the same process as the server.
;;
(define (server:ping host-port-in server-id #!key (do-exit #f))
  (let ((host:port (if (not host-port-in) ;; use read-dotserver to find
		       #f ;; (server:check-if-running *toppath*)
		;; (if (number? host-port-in) ;; we were handed a server-id
		;; 	   (let ((srec (tasks:get-server-by-id (db:delay-if-busy (tasks:open-db)) host-port-in)))
		;; 	     ;; (print "srec: " srec " host-port-in: " host-port-in)
		;; 	     (if srec
		;; 		 (conc (vector-ref srec 3) ":" (vector-ref srec 4))

	  (begin
	    (if host-port-in
		(debug:print 0 *default-log-port*  "ERROR: bad host:port"))
	    (if do-exit (exit 1))
	    #f)
	  (let* ((iface      (car host-port))
		 (port       (cadr host-port))
		 (server-dat (http-transport:client-connect iface port server-id))
		 (login-res  (rmt:login-no-auto-client-setup server-dat)))
	    (if (and (list? login-res)
		     (car login-res))
		(begin
		  ;; (print "LOGIN_OK")
		  (if do-exit (exit 0))
		  #t)

                                 (debug:print 0 *default-log-port* "INFO: syncer thread NOT sleeping ; maybe time-to-exit...")))

                               (if (not (configf:lookup *configdat* "server" "disable-db-snapshot"))
                                   (common:snapshot-file mtdbfile subdir: ".db-snapshot"))
		               (delete-file* staging-file)
		               (let* ((start-time (current-milliseconds))
                                      (res (system sync-cmd))
                                      (dbbackupfile (conc mtdbfile ".backup"))
                                      (res2 
                                       (cond
                                        ((eq? 0 res )
                                         (handle-exceptions
                                            exn
                                            #f
                                         (if (file-exists? dbbackupfile)
		                           (delete-file* dbbackupfile)
                                         )
                                         (if (eq? 0 (file-size sync-log))
                                             (delete-file* sync-log))
		                         (system (conc "/bin/mv " staging-file " " mtdbfile))
                                         
                                         (set! last-sync-seconds (/ (- (current-milliseconds) start-time) 1000))
                                         (set! off-time (calculate-off-time
                                                         last-sync-seconds
                                                         (cond
                                                          ((and (number? duty-cycle) (> duty-cycle 0) (< duty-cycle 1))
                                                           duty-cycle)
                                                          (else
                                                           (debug:print 0 *default-log-port* "WARNING: ["(common:human-time)"] server.sync-duty-cycle is invalid.  Should be a number between 0 and 1, but "duty-cycle" was specified.  Using default value: "default-duty-cycle)
                                                           default-duty-cycle))))
                                         
                                         (debug:print 1 *default-log-port* "INFO: ["(common:human-time)"] pid="(current-process-id)" SYNC took "last-sync-seconds" sec")
                                         (debug:print 1 *default-log-port* "INFO: ["(common:human-time)"] pid="(current-process-id)" SYNC took "last-sync-seconds" sec ; with duty-cycle of "duty-cycle" off time is now "off-time)
                                         'sync-completed))
                                        (else
                                         (system (conc "/bin/cp "sync-log" "sync-log".fail"))
                                         (debug:print 0 *default-log-port* "ERROR: ["(common:human-time)"] Sync failed. See log at "sync-log".fail")
                                         (if (file-exists? (conc mtdbfile ".backup"))
                                             (system (conc "/bin/cp "mtdbfile ".backup " mtdbfile)))
                                         #f))))
                                 (common:simple-file-release-lock lockfile)

           (let* ((parent-dir target-path)
                  (last-dir-name (if  (pathname-extension target-path)  
                                      (conc(pathname-file target-path) "." (pathname-extension target-path))
                                      (pathname-file target-path)))
                  (curr-dir (current-directory))   
                  (start-dir (conc (current-directory) "/" last-dir-name))
                  (execlude (make-exclude-pattern (string-split restrictions ",")))
                   (tmpfile (conc "/tmp/my-pipe-" (current-process-id))))
                    (if  (file-exists? start-dir)
                    (begin
                         (sauth:print-error (conclast-dir-name " already exist in your work dir."))
                         (sauth:print-error  "Nothing has been retrieved!!  "))
                     (begin
                   ;    (sretrieve:do-as-calling-user
                   ; (lambda ()
                  ; (print tmpfile) 
                  ;(if (not (file-exists?  (conc "/tmp/" (current-user-name)))) 
		  ;    (create-directory (conc "/tmp/" (current-user-name)) #t))
                          (change-directory parent-dir)
                            (create-fifo  tmpfile)
                                  (process-fork 
    				   (lambda()
                                       (sleep 1) 
       					(with-output-to-file tmpfile
         				(lambda ()

	       (state      (db:get-value-by-header row header "state"))
	       (status     (db:get-value-by-header row header "status"))
	       (owner      (db:get-value-by-header row header "owner"))
	       (event-time (db:get-value-by-header row header "event_time"))
	       (comment    (db:get-value-by-header row header "comment"))
	       (fail-count (db:get-value-by-header row header "fail_count"))
	       (pass-count (db:get-value-by-header row header "pass_count"))
               (db-contour (db:get-value-by-header row header "contour"))
	       (contour    (if (args:get-arg "-prepend-contour") 
                                 (if (and db-contour (not (equal? db-contour ""))  (string? db-contour )) 
                                           (begin 
                                            (debug:print-info 10 *default-log-port*  "db-contour" db-contour) 
 						db-contour)
					    (args:get-arg "-contour"))))
               (run-tag (if (args:get-arg "-run-tag")
                            (args:get-arg "-run-tag")
									""))
               (last-update (db:get-value-by-header row header "last_update"))
	       (keytarg    (if (or (args:get-arg "-prepend-contour") (args:get-arg "-prefix-target"))
	       			(conc "MT_CONTOUR/MT_AREA/" (string-intersperse (rmt:get-keys) "/")) (string-intersperse (rmt:get-keys) "/"))) ;; e.g. version/iteration/platform
               (base-target      (rmt:get-target run-id))
	       (target     (if (or (args:get-arg "-prepend-contour") (args:get-arg "-prefix-target")) 
	       			(conc (or (args:get-arg "-prefix-target") (conc contour "/" (common:get-area-name) "/")) base-target) base-target))                 ;; e.g. v1.63/a3e1/ubuntu
	       (spec-id    (pgdb:get-ttype dbh keytarg))
	       (publish-time (if (args:get-arg "-cp-eventtime-to-publishtime")
                            event-time
                           (current-seconds))) 
	       (new-run-id (if (and run-name base-target) (pgdb:get-run-id dbh spec-id target run-name area-id) #f)))
         (if new-run-id
	         (begin ;; let ((run-record (pgdb:get-run-info dbh new-run-id))
		        (hash-table-set! runs-ht run-id new-run-id)
		;; ensure key fields are up to date
     ;; if last_update == pgdb_last_update do not update smallest-last-update-time  
    (let* ((pgdb-last-update (pgdb:get-run-last-update dbh new-run-id))
           (smallest-time (hash-table-ref/default smallest-last-update-time "smallest-time" #f)))
     (if (and  (> last-update pgdb-last-update) (or (not smallest-time) (< last-update smallest-time)))
        (hash-table-set! smallest-last-update-time "smallest-time" last-update)))
		(pgdb:refresh-run-info
		 dbh
		 new-run-id
		 state status owner event-time comment fail-count pass-count area-id last-update publish-time)
     (debug:print-info 4 *default-log-port* "Working on run-id " run-id " pgdb-id "  new-run-id )
     (if (not (equal? run-tag ""))
      (task:add-run-tag dbh new-run-id run-tag))
		new-run-id) 
      
	      (if (or (not state) (equal? state "deleted"))
          (begin 
          (debug:print-info 1 *default-log-port*  "Warning: Run with id " run-id " was created after previous sync and deleted before the sync") #f)
          (if (handle-exceptions
		        exn
		        (begin (print-call-chain)
              (print ((condition-property-accessor 'exn 'message) exn))     
			      #f)

                          #f)))
    (if step-id
      (begin  
        (if pgdb-test-id
           (begin 
                (if  pgdb-step-id
                   (begin
                    (debug:print-info 4 *default-log-port*  "Updating existing test-step with test-id: " test-id " and step-id " step-id " pgdb test id: " pgdb-test-id " pgdb step id " pgdb-step-id )
										(let* ((pgdb-last-update (pgdb:get-test-step-last-update dbh pgdb-step-id)))
         (if (and  (> last-update pgdb-last-update) (or (not smallest-time) (< last-update smallest-time)))
        (hash-table-set! smallest-last-update-time "smallest-time" last-update))) 
                    (pgdb:update-test-step dbh pgdb-step-id pgdb-test-id stepname state status event_time comment logfile last-update))
                    (begin
 		      (debug:print-info 4 *default-log-port*  "Inserting test-step with test-id: " test-id " and step-id " step-id  " pgdb test id: " pgdb-test-id)
                     (if (or (not smallest-time) (< last-update smallest-time))
        				      (hash-table-set! smallest-last-update-time "smallest-time" last-update))
                      (pgdb:insert-test-step dbh pgdb-test-id stepname state status event_time comment logfile last-update )
                      (set! pgdb-step-id  (pgdb:get-test-step-id dbh pgdb-test-id stepname state))))
                (hash-table-set! step-ht step-id pgdb-step-id ))
           (debug:print-info 1 *default-log-port*  "Error: Test not cashed")))
      (debug:print-info 1 *default-log-port*  "Error: Could not get test step info for step id " test-step-id ))))	;; this is a wierd senario need to debug      	

                                  #f)))
    (if data-id
      (begin
        (if pgdb-test-id
           (begin 
                (if  pgdb-data-id
                   (begin
                    (debug:print-info 4 *default-log-port*  "Updating existing test-data with test-id: " test-id " and  data-id " data-id " pgdb test id: " pgdb-test-id " pgdb data id " pgdb-data-id)
                    (let* ((pgdb-last-update (pgdb:get-test-data-last-update dbh pgdb-data-id)))
         (if (and  (>  last-update pgdb-last-update) (or (not smallest-time) (< last-update smallest-time)))
        (hash-table-set! smallest-last-update-time "smallest-time" last-update))) 
                    (pgdb:update-test-data dbh pgdb-data-id pgdb-test-id  category variable value expected tol units comment status type last-update))
                    (begin
 		      (debug:print-info 4 *default-log-port*  "Inserting test-data with test-id: " test-id " and data-id " data-id " pgdb test id: " pgdb-test-id)
                       (if (handle-exceptions
		      exn
		      (begin (print-call-chain)
                              (print ((condition-property-accessor 'exn 'message) exn))     
			#f)
                     
                    (pgdb:insert-test-data dbh pgdb-test-id category variable value expected tol units comment status type last-update))

				(begin
                                  ;(print pgdb-run-id)    
                                 (pgdb:get-test-id dbh pgdb-run-id test-name item-path))
                                 #f)))
	 ;; "id"           "run_id"        "testname"  "state"      "status"      "event_time"
	 ;; "host"         "cpuload"       "diskfree"  "uname"      "rundir"      "item_path"
	 ;; "run_duration" "final_logf"    "comment"   "shortdir"   "attemptnum"  "archived"
         (if (or (not item-path) (string-null? item-path))
             (debug:print-info 0 *default-log-port* "Working on Run id : " run-id "and test name : " test-name)) 
         (if pgdb-run-id
           (begin
	   (if pgdb-test-id ;; have a record
	     (begin ;; let ((key-name (conc run-id "/" test-name "/" item-path)))
	       (debug:print-info 4 *default-log-port*  "Updating existing test with run-id: " run-id " and test-id: " test-id " pgdb run id: " pgdb-run-id "  pgdb-test-id "  pgdb-test-id)
         (let* ((pgdb-last-update (pgdb:get-test-last-update dbh pgdb-test-id)))
         (if (and  (>  last-update pgdb-last-update) (or (not smallest-time) (< last-update smallest-time))) ;;if last-update is same as pgdb-last-update then it is safe to assume the records are identical and we can use a larger last update time.
        (hash-table-set! smallest-last-update-time "smallest-time" last-update))) 
	       (pgdb:update-test dbh pgdb-test-id pgdb-run-id test-name item-path state status host cpuload diskfree uname run-dir log-file run-duration comment event-time archived last-update pid))
	     (begin 
           (debug:print-info 4 *default-log-port*  "Inserting test with run-id: " run-id " and test-id: " test-id  " pgdb run id: " pgdb-run-id)
           (pgdb:insert-test dbh pgdb-run-id test-name item-path state status host cpuload diskfree uname run-dir log-file run-duration comment event-time archived last-update pid)
            (if (or (not smallest-time) (< last-update smallest-time))
        				(hash-table-set! smallest-last-update-time "smallest-time" last-update))
           (set! pgdb-test-id (pgdb:get-test-id dbh pgdb-run-id test-name item-path))))
           (hash-table-set! test-ht test-id pgdb-test-id))
           (debug:print-info 1 *default-log-port*  "WARNING: Skipping run with run-id:" run-id ". This run was created after privious sync and removed before this sync."))))
     test-ids)))

	   #f)
           (if (not (pgdb:is-area-taged-with-a-tag dbh (vector-ref tag-info 0)  (vector-ref area-info 0)))  
	   (pgdb:insert-area-tag  dbh   (vector-ref tag-info 0)  (vector-ref area-info 0))))))

(define (tasks:sync-run-data dbh cached-info run-ids area-info smallest-last-update-time) 
  (for-each
     (lambda (run-id)
      (debug:print-info 4 *default-log-port*   "Check if run with " run-id " needs to be synced" )
       (tasks:run-id->mtpg-run-id dbh cached-info run-id area-info smallest-last-update-time))
run-ids))


;; get runs changed since last sync
;; (define (tasks:sync-test-data dbh cached-info area-info)
;;   (let* ((

;;======================================================================

;;======================================================================
;; Tests
;;======================================================================

(declare (unit tests))
;;(declare (uses lock-queue))
(declare (uses db))
(declare (uses tdb))
(declare (uses common))
;; (declare (uses dcommon)) ;; needed for the steps processing
(declare (uses items))
(declare (uses runconfig))
;; (declare (uses sdb))