Megatest

    start-server
    kill-server

    ;; TESTS
    test-set-state-status-by-id
    delete-test-records
    delete-old-deleted-test-records
    test-set-status-state
    test-set-state-status
    test-set-top-process-pid
    roll-up-pass-fail-counts
    set-state-status-and-roll-up-items
    update-pass-fail-counts
    top-test-set-per-pf-counts ;; (db:top-test-set-per-pf-counts (db:get-db *db* 5) 5 "runfirst")

    ;; RUNS
    register-run
    set-tests-state-status
    delete-run

	    ((start-server)                    (apply server:kind-run params))
	    ((kill-server)                     (set! *server-run* #f))

	    ;; TESTS
	    ((test-set-state-status-by-id)     (apply db:test-set-state-status-by-id dbstruct params))
	    ((delete-test-records)             (apply db:delete-test-records dbstruct params))
	    ((delete-old-deleted-test-records) (apply db:delete-old-deleted-test-records dbstruct params))
	    ((test-set-status-state)           (apply db:test-set-status-state dbstruct params))
	    ((test-set-state-status)           (apply db:test-set-state-status dbstruct params))
	    ((test-set-top-process-pid)        (apply db:test-set-top-process-pid dbstruct params))
	    ((roll-up-pass-fail-counts)        (apply db:roll-up-pass-fail-counts dbstruct params))
	    ((set-state-status-and-roll-up-items) (apply db:set-state-status-and-roll-up-items dbstruct params))
	    ;; ((update-pass-fail-counts)         (apply db:general-call dbstruct 'update-pass-fail-counts params))
	    ((top-test-set-per-pf-counts)      (apply db:top-test-set-per-pf-counts dbstruct params))
	    ((test-set-archive-block-id)       (apply db:test-set-archive-block-id dbstruct params))

	    ;; RUNS
	    ((register-run)                 (apply db:register-run dbstruct params))
	    ((set-tests-state-status)       (apply db:set-tests-state-status dbstruct params))
	    ((delete-run)                   (apply db:delete-run dbstruct params))

	    ;; MISC
            ((get-latest-host-load)         (apply db:get-latest-host-load dbstruct params))
	    ((have-incompletes?)            (apply db:have-incompletes? dbstruct params))
	    ((login)                        (apply db:login dbstruct params))
	    ((general-call)                 (let ((stmtname   (car params))
						  (run-id     (cadr params))
						  (realparams (cddr params)))
					      (db:with-db dbstruct run-id #t ;; these are all for modifying the db
							  (lambda (db)
							    (db:general-call db stmtname realparams)))))
					      (db:general-call dbstruct stmtname realparams)))
	    ((sdb-qry)                      (apply sdb:qry params))
	    ((ping)                         (current-process-id))

	    ;; TESTMETA
	    ((testmeta-get-record)       (apply db:testmeta-get-record dbstruct params))

	    ;; TASKS 
	    ((find-task-queue-records)   (apply tasks:find-task-queue-records dbstruct params))))))))


;; http-server  send-response
;;                 api:process-request
;;                    db:*
;;
;; NB// Runs on the server as part of the server loop
;;
(define (api:process-request dbstruct $) ;; the $ is the request vars proc
  (set! *api-process-request-count* (+ *api-process-request-count* 1))
  (let* ((cmd     ($ 'cmd))
	 (paramsj ($ 'params))
	 (params  (db:string->obj paramsj transport: 'http)) ;; (rmt:json-str->dat paramsj))
	 (resdat  (api:execute-requests dbstruct (vector cmd params))) ;; #( flag result )
	 (res     (vector-ref resdat 1)))

    (if (> *api-process-request-count* *max-api-process-requests*)
	(set! *max-api-process-requests* *api-process-request-count*))
    (set! *api-process-request-count* (- *api-process-request-count* 1))
    ;; This can be here but needs controls to ensure it doesn't run more than every 4 seconds
    ;; (rmt:dat->json-str
    ;;  (if (or (string? res)
    ;;          (list?   res)
    ;;          (number? res)
    ;;          (boolean? res))
    ;;      res 
    ;;      (list "ERROR, not string, list, number or boolean" 1 cmd params res)))))
    (db:obj->string res transport: 'http)))

(define *db-last-sync*        0)                 ;; last time the sync to megatest.db happened
(define *db-sync-in-progress* #f)                ;; if there is a sync in progress do not try to start another
(define *db-multi-sync-mutex* (make-mutex))      ;; protect access to *db-sync-in-progress*, *db-last-sync*
;; task db
(define *task-db*             #f) ;; (vector db path-to-db)
(define *db-access-allowed*   #t) ;; flag to allow access
(define *db-access-mutex*     (make-mutex))
(define *db-transaction-mutex* (make-mutex))
(define *db-cache-path*       #f)
(define *db-with-db-mutex*    (make-mutex))

;; SERVER
(define *my-client-signature* #f)
(define *transport-type*    'http)             ;; override with [server] transport http|rpc|nmsg
(define *runremote*         #f)                ;; if set up for server communication this will hold <host port>
(define *max-cache-size*    0)
(define *logged-in-clients* (make-hash-table))
(define *server-id*         #f)
(define *server-info*       #f)
(define *time-to-exit*      #f)
(define *server-run*        #t)
(define *run-id*            #f)
(define *server-kind-run*   (make-hash-table))
(define *home-host*         #f)
(define *total-non-write-delay* 0)
(define *heartbeat-mutex*   (make-mutex))
(define *api-process-request-count* 0)
(define *max-api-process-requests* 0)

;; client
(define *rmt-mutex*         (make-mutex))     ;; remote access calls mutex 

;; RPC transport
(define *rpc:listener*      #f)

	(newstate   #f)
	(wtxtbox    #f))
    (iup:frame
     #:title "Set fields"
     (iup:vbox
      (iup:hbox (iup:label "Comment:")
		(let ((txtbox (iup:textbox #:action (lambda (val a b)
						      (rmt:test-set-state-status-by-id run-id test-id #f #f b)
						      ;; (rmt:test-set-state-status-by-id run-id test-id #f #f b)
						      (rmt:test-set-state-status run-id test-id #f #f b)
						      ;; IDEA: Just set a variable with the proc to call?
						      (rmt:test-set-state-status-by-id run-id test-id #f #f b)
						      ;; (rmt:test-set-state-status-by-id run-id test-id #f #f b)
						      (set! newcomment b))
					   #:value (db:test-get-comment testdat)
					   #:expand "HORIZONTAL")))
		  (set! wtxtbox txtbox)
		  txtbox))
		  
      (apply iup:hbox
	     (iup:label "STATE:" #:size "30x")
	     (let* ((btns  (map (lambda (state)
				  (let ((btn (iup:button state
							 #:expand "HORIZONTAL" #:size "50x" #:font "Courier New, -10"
							 #:action (lambda (x)
								    ;; (rmt:test-set-state-status-by-id run-id test-id state #f #f)
								    (rmt:roll-up-pass-fail-counts run-id test-id #f state #f #f) ;; test-name passed in as test-id is respected
								    (rmt:set-state-status-and-roll-up-items run-id test-id #f state #f #f) ;; test-name passed in as test-id is respected
								    (db:test-set-state! testdat state)))))
				    btn))
				(map cadr *common:std-states*)))) ;; (list "COMPLETED" "NOT_STARTED" "RUNNING" "REMOTEHOSTSTART" "LAUNCHED" "KILLED" "KILLREQ"))))
	       (vector-set! *state-status* 0
			    (lambda (state color)
			      (for-each 
			       (lambda (btn)

														  (begin
														    (iup:attribute-set! wtxtbox "VALUE" c)
														    (if (not *dashboard-comment-share-slot*)
															(set! *dashboard-comment-share-slot* wtxtbox)))
														  ))))
									  (begin
									    ;; (rmt:test-set-state-status-by-id run-id test-id #f status #f)
									    (rmt:roll-up-pass-fail-counts run-id test-id #f #f status #f) ;; test-name passed in as test-id is respected
									    (rmt:set-state-status-and-roll-up-items run-id test-id #f #f status #f) ;; test-name passed in as test-id is respected
									    (db:test-set-status! testdat status))))))))
				    btn))
				(map cadr *common:std-statuses*)))) ;; (list  "PASS" "WARN" "FAIL" "CHECK" "n/a" "WAIVED" "SKIP"))))
	       (vector-set! *state-status* 1
			    (lambda (status color)
			      (for-each 
			       (lambda (btn)

			      #:expand "HORIZONTAL"
			      #:action (lambda (obj)
					 (let ((comment (iup:attribute comnt "VALUE"))
					       (test-id (db:test-get-id testdat)))
					   (if (or (not wpatt)
						   (string-match wregx comment))
					       (begin
						 (rmt:test-set-state-status-by-id run-id test-id #f "WAIVED" comment)
						 ;; (rmt:test-set-state-status-by-id run-id test-id #f "WAIVED" comment)
						 (rmt:test-set-state-status-by run-id test-id #f "WAIVED" comment)
						 (db:test-set-status! testdat "WAIVED")
						 (cmtcmd comment)
						 (iup:destroy! dlog))))))
		  (iup:button "Cancel"
			      #:expand "HORIZONTAL" 
			      #:action (lambda (obj)
					 (iup:destroy! dlog)))))))

;;======================================================================
;; Database access
;;======================================================================

;; dbstruct vector containing all the relevant dbs like main.db, megatest.db, run.db etc

(require-extension (srfi 18) extras tcp) ;; RADT => use of require-extension?
(use (srfi 18) extras tcp) ;; RADT => use of require-extension?
(use sqlite3 srfi-1 posix regex regex-case srfi-69 csv-xml s11n md5 message-digest base64 format dot-locking z3 typed-records)
(import (prefix sqlite3 sqlite3:))
(import (prefix base64 base64:)) ;; RADT => prefix??

(declare (unit db))
(declare (uses common))
(declare (uses keys))

(define (db:with-db dbstruct run-id r/w proc . params)
  (let* ((dbdat (if (dbr:dbstruct? dbstruct)
		    (db:get-db dbstruct run-id)
		    (begin
		      (print-call-chain)
		      (print "db:with-db called with dbdat instead of dbstruct, FIXME!!")
		      dbstruct))) ;; cheat, allow for passing in a dbdat
	 (db    (db:dbdat-get-db dbdat))) 
	 (db    (db:dbdat-get-db dbdat))
	 (use-mutex (> *api-process-request-count* 50)))
    (if (and use-mutex
	     (common:low-noise-print 120 "over-50-parallel-api-requests"))
	(debug:print-info 0 *default-log-port* *api-process-request-count* " parallel api requests being processed in process " (current-process-id) ", throttling access"))
    (if (common:low-noise-print 120 "parallel-api-requests")
	(debug:print-info 0 *default-log-port* "Parallel api request count: " *api-process-request-count* " max parallel requests: " *max-api-process-requests*))
    (handle-exceptions
     exn
     (begin
       (print-call-chain (current-error-port))
       (debug:print-error 0 *default-log-port* "sqlite3 issue in db:with-db, dbstruct=" dbstruct ", run-id=" run-id ", proc=" proc ", params=" params " error: " ((condition-property-accessor 'exn 'message) exn))
       (print-call-chain (current-error-port)))
       )
     (if use-mutex (mutex-lock! *db-with-db-mutex*))
     (let ((res (apply proc db params)))
       (if use-mutex (mutex-unlock! *db-with-db-mutex*))
       ;; (if (vector? dbstruct)(db:done-with dbstruct run-id r/w))
       res))))

;;======================================================================
;; K E E P   F I L E D B   I N   dbstruct
;;======================================================================

	     full-sel)

	    ;; first pass implementation, just insert all changed rows
	    (for-each 
	     (lambda (targdb)
	       (let* ((db     (db:dbdat-get-db targdb))
		      (stmth  (sqlite3:prepare db full-ins)))
		 ;; (db:delay-if-busy targdb) ;; NO WAITING
		 (db:delay-if-busy targdb) ;; NO WAITING
		 (for-each
		  (lambda (fromdat-lst)
		    (sqlite3:with-transaction
		     db
		     (lambda ()
		       (for-each ;; 
			(lambda (fromrow)

	   (min-incompleted-ids (map car incompleted)) ;; do 'em all
	   (all-ids             (append min-incompleted-ids (map car oldlaunched))))
      (if (> (length all-ids) 0)
	  (begin
	    (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as INCOMPLETE")
            (for-each
             (lambda (test-id)
               (db:test-set-status-state dbstruct run-id test-id "COMPLETE" "DEAD" "Test failed to complete"))
               (db:test-set-state-status dbstruct run-id test-id "COMPLETE" "DEAD" "Test failed to complete"))
             all-ids))))))

;; ALL REPLACED BY THE BLOCK ABOVE
;;
;; 	    (sqlite3:execute 
;; 	     db
;; 	     (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN (" 

;; ;;	     (run-id    (list-ref toptest 5)))
;; 	 (db:top-test-set-per-pf-counts dbstruct run-id test-name)))
;;      toplevels)))

;; BUG: Probably broken - does not explicitly use run-id in the query
;;
(define (db:top-test-set-per-pf-counts dbstruct run-id test-name)
  (db:general-call (db:get-db dbstruct run-id) 'top-test-set-per-pf-counts (list test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name))) 
 
  (db:general-call dbstruct 'top-test-set-per-pf-counts (list test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name)))

		     
;; Clean out old junk and vacuum the database
;;
;; Ultimately do something like this:
;;
;; 1. Look at test records either deleted or part of deleted run:
;;    a. If test dir exists, set the the test to state='UNKNOWN', Set the run to 'unknown'
;;    b. If test dir gone, delete the test record

;; 			    2))
;;     (if (> (abs (- *last-global-delta-printed* *global-delta*)) 0.08) ;; don't print all the time, only if it changes a bit
;; 	(begin
;; 	  (debug:print-info 4 *default-log-port* "launch throttle factor=" *global-delta*)
;; 	  (set! *last-global-delta-printed* *global-delta*)))

(define (db:set-var dbstruct var val)
  (let* ((dbdat (db:get-db dbstruct #f))
	 (db    (db:dbdat-get-db dbdat)))
    (sqlite3:execute db "INSERT OR REPLACE INTO metadat (var,val) VALUES (?,?);" var val)))
  (db:with-db dbstruct #f #t 
	      (lambda (db)
		(sqlite3:execute db "INSERT OR REPLACE INTO metadat (var,val) VALUES (?,?);" var val))))

(define (db:del-var dbstruct var)
  ;; (db:delay-if-busy)
  (db:with-db dbstruct #f #t 
	      (lambda (db)
		(sqlite3:execute db "DELETE FROM metadat WHERE var=?;" var))))

;; use a global for some primitive caching, it is just silly to
;; re-read the db over and over again for the keys since they never
;; change

	 (valslots  (keys->valslots keys)) ;; ?,?,? ...
	 (allvals   (append (list runname state status user) (map cadr keyvals)))
	 (qryvals   (append (list runname) (map cadr keyvals)))
	 (key=?str  (string-intersperse (map (lambda (k)(conc k "=?")) keys) " AND ")))
    (debug:print 3 *default-log-port* "keys: " keys " allvals: " allvals " keyvals: " keyvals " key=?str is " key=?str)
    (debug:print 2 *default-log-port* "NOTE: using target " (string-intersperse (map cadr keyvals) "/") " for this run")
    (if (and runname (null? (filter (lambda (x)(not x)) keyvals))) ;; there must be a better way to "apply and"
	(db:with-db
	 dbstruct #f #f
	 (lambda (db)
	(let ((res #f))
	  ;; (db:delay-if-busy dbdat)
	  (apply sqlite3:execute db (conc "INSERT OR IGNORE INTO runs (runname,state,status,owner,event_time" comma keystr ") VALUES (?,?,?,?,strftime('%s','now')" comma valslots ");")
		 allvals)
	  ;; (db:delay-if-busy dbdat)
	  (apply sqlite3:for-each-row 
		 (lambda (id)
		   (set! res id))
		 db
		 (let ((qry (conc "SELECT id FROM runs WHERE (runname=? " andstr key=?str ");")))
	   (let ((res #f))
	     ;; (db:delay-if-busy dbdat)
	     (apply sqlite3:execute db (conc "INSERT OR IGNORE INTO runs (runname,state,status,owner,event_time" comma keystr ") VALUES (?,?,?,?,strftime('%s','now')" comma valslots ");")
		    allvals)
	     ;; (db:delay-if-busy dbdat)
	     (apply sqlite3:for-each-row 
		    (lambda (id)
		      (set! res id))
		    db
		    (let ((qry (conc "SELECT id FROM runs WHERE (runname=? " andstr key=?str ");")))
					;(debug:print 4 *default-log-port* "qry: " qry) 
		   qry)
		 qryvals)
		      qry)
		    qryvals)
	  ;; (db:delay-if-busy dbdat)
	  (sqlite3:execute db "UPDATE runs SET state=?,status=?,event_time=strftime('%s','now') WHERE id=? AND state='deleted';" state status res)
	  res) 
	     (sqlite3:execute db "UPDATE runs SET state=?,status=?,event_time=strftime('%s','now') WHERE id=? AND state='deleted';" state status res)
	     res))) 
	(begin
	  (debug:print-error 0 *default-log-port* "Called without all necessary keys")
	  #f))))

;; replace header and keystr with a call to runs:get-std-run-fields
;;
;; keypatts: ( (KEY1 "abc%def")(KEY2 "%") )

	"SELECT state,status,count(id) AS count FROM tests WHERE run_id=? AND NOT(uname='n/a' AND item_path='') GROUP BY state,status;;"
	run-id))))

;; Update run_stats for given run_id
;; input data is a list (state status count)
;;
(define (db:update-run-stats dbstruct run-id stats)
  ;; (mutex-lock! *db-transaction-mutex*)
  (db:with-db
   dbstruct
   #f
   #f

   (lambda (db)
     ;; remove previous data
     
     (let* ((stmt1 (sqlite3:prepare db "DELETE FROM run_stats WHERE run_id=? AND state=? AND status=?;"))
	    (stmt2 (sqlite3:prepare db "INSERT INTO run_stats (run_id,state,status,count) VALUES (?,?,?,?);"))
	    (res
	     (sqlite3:with-transaction
	      db
	      (lambda ()
		(for-each
		 (lambda (dat)
		   (sqlite3:execute stmt1 run-id (car dat)(cadr dat))
		   (apply sqlite3:execute stmt2 run-id dat))
		 stats)))))
       (sqlite3:finalize! stmt1)
       (sqlite3:finalize! stmt2)
       ;; (mutex-unlock! *db-transaction-mutex*)
       res))))

(define (db:get-main-run-stats dbstruct run-id)
  (db:with-db
   dbstruct
   #f ;; this data comes from main
   #f

    (reverse run-ids)))))

;; get some basic run stats
;;
;; ( (runname (( state  count ) ... ))
;;   (   ...  
(define (db:get-run-stats dbstruct)
  (let* ((dbdat        (db:get-db dbstruct #f))
	 (db           (db:dbdat-get-db dbdat))
	 (totals       (make-hash-table))
  (let* ((totals       (make-hash-table))
	 (curr         (make-hash-table))
	 (res          '())
	 (runs-info    '()))
    ;; First get all the runname/run-ids
    ;; (db:delay-if-busy dbdat)
    (sqlite3:for-each-row
     (lambda (run-id runname)
       (set! runs-info (cons (list run-id runname) runs-info)))
     db
     "SELECT id,runname FROM runs WHERE state != 'deleted' ORDER BY event_time DESC;") ;; If you change this to the more logical ASC please adjust calls to db:get-run-stats
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (sqlite3:for-each-row
	(lambda (run-id runname)
	  (set! runs-info (cons (list run-id runname) runs-info)))
	db
	"SELECT id,runname FROM runs WHERE state != 'deleted' ORDER BY event_time DESC;"))) ;; If you change this to the more logical ASC please adjust calls to db:get-run-stats
    ;; for each run get stats data
    (for-each
     (lambda (run-info)
       ;; get the net state/status counts for this run
       (let* ((run-id   (car  run-info))
	      (run-name (cadr run-info)))
	 (db:with-db

                            qry-str
                            runnamepatt)))))))

;; use (get-value-by-header (db:get-header runinfo)(db:get-rows runinfo))
(define (db:get-run-info dbstruct run-id)
  ;;(if (hash-table-ref/default *run-info-cache* run-id #f)
  ;;    (hash-table-ref *run-info-cache* run-id)
  (let* ((dbdat     (db:get-db dbstruct #f))
	 (db        (db:dbdat-get-db dbdat))
	 (res       (vector #f #f #f #f))
  (let* ((res       (vector #f #f #f #f))
	 (keys      (db:get-keys dbstruct))
	 (remfields (list "id" "runname" "state" "status" "owner" "event_time"))
	 (header    (append keys remfields))
	 (keystr    (conc (keys->keystr keys) ","
			  (string-intersperse remfields ","))))
    (debug:print-info 11 *default-log-port* "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
    ;; (db:delay-if-busy dbdat)
    (sqlite3:for-each-row
     (lambda (a . x)
       (set! res (apply vector a x)))
     db 
     (conc "SELECT " keystr " FROM runs WHERE id=? AND state != 'deleted';")
     run-id)
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (sqlite3:for-each-row
	(lambda (a . x)
	  (set! res (apply vector a x)))
	db 
	(conc "SELECT " keystr " FROM runs WHERE id=? AND state != 'deleted';")
	run-id)))
    (debug:print-info 11 *default-log-port* "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
    (let ((finalres (vector header res)))
      ;; (hash-table-set! *run-info-cache* run-id finalres)
      finalres)))

(define (db:set-comment-for-run dbstruct run-id comment)
  (db:with-db

;; K E Y S
;;======================================================================

;; get key val pairs for a given run-id
;; ( (FIELDNAME1 keyval1) (FIELDNAME2 keyval2) ... )
(define (db:get-key-val-pairs dbstruct run-id)
  (let* ((keys (db:get-keys dbstruct))
	 (res  '())
	 (dbdat  (db:get-db dbstruct #f))
	 (db     (db:dbdat-get-db dbdat)))
    (for-each 
     (lambda (key)
       (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	 (res  '()))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (for-each 
	(lambda (key)
	  (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row 
	  (lambda (key-val)
	    (set! res (cons (list key key-val) res)))
	  db qry run-id)))
     keys)
    (reverse res)))
	    (sqlite3:for-each-row 
	     (lambda (key-val)
	       (set! res (cons (list key key-val) res)))
	     db qry run-id)))
	keys)))
       (reverse res)))

;; get key vals for a given run-id
(define (db:get-key-vals dbstruct run-id)
  (let* ((keys (db:get-keys dbstruct))
	 (res  '())
	 (dbdat  (db:get-db dbstruct #f))
	 (db     (db:dbdat-get-db dbdat)))
    (for-each 
     (lambda (key)
       (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row 
	  (lambda (key-val)
	    (set! res (cons key-val res)))
	  db qry run-id)))
     keys)
	 (res  '()))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (for-each 
	(lambda (key)
	  (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	    ;; (db:delay-if-busy dbdat)
	    (sqlite3:for-each-row 
	     (lambda (key-val)
	       (set! res (cons key-val res)))
	     db qry run-id)))
	keys)))
    (let ((final-res (reverse res)))
      (hash-table-set! *keyvals* run-id final-res)
      final-res)))

;; The target is keyval1/keyval2..., cached in *target* as it is used often
(define (db:get-target dbstruct run-id)
  (let* ((keyvals (db:get-key-vals dbstruct run-id))

	 (db:get-all-run-ids dbstruct)))
    res))

;; Convert calling routines to get list of run-ids and loop, do not use the get-tests-for-runs
;;

(define (db:delete-test-records dbstruct run-id test-id)
  (let* ((dbdat (db:get-db dbstruct run-id))
	 (db    (db:dbdat-get-db dbdat)))
    (db:general-call dbdat 'delete-test-step-records (list test-id))
  (db:general-call dbstruct 'delete-test-step-records (list test-id))
    ;; (db:delay-if-busy)
    (db:general-call dbdat 'delete-test-data-records (list test-id))
    (sqlite3:execute db "UPDATE tests SET state='DELETED',status='n/a',comment='' WHERE id=?;" test-id)))
  (db:general-call dbstruct 'delete-test-data-records (list test-id))
  (db:with-db
   dbstruct #f #f
   (sqlite3:execute db "UPDATE tests SET state='DELETED',status='n/a',comment='' WHERE id=?;" test-id)))

;; 
(define (db:delete-old-deleted-test-records dbstruct)
  (let (;; (run-ids  (db:get-all-run-ids dbstruct))
	(targtime (- (current-seconds)(* 30 24 60 60)))) ;; one month in the past
    (db:with-db
     dbstruct

;; NB// This call only operates on toplevel tests. Consider replacing it with more general call
;;
(define (db:set-tests-state-status dbstruct run-id testnames currstate currstatus newstate newstatus)
  (for-each (lambda (testname)
	      (let ((qry (conc "UPDATE tests SET state=?,status=? WHERE "
			       (if currstate  (conc "state='" currstate "' AND ") "")
			       (if currstatus (conc "status='" currstatus "' AND ") "")
			       " run_id=? AND testname LIKE ?;")))
			       " run_id=? AND testname LIKE ?;"))
		    (test-id (db:get-test-id dbstruct run-id testname "")))
		(db:with-db
		 dbstruct
		 run-id
		 #t
		 (lambda (db)
		   (let ((test-id (db:get-test-id dbstruct run-id testname "")))
		     (sqlite3:execute db qry newstate newstatus run-id testname)
		     (if test-id (mt:process-triggers run-id test-id newstate newstatus)))
		   (sqlite3:execute db qry newstate newstatus run-id testname)))
		(if test-id (mt:process-triggers dbstruct run-id test-id newstate newstatus))))
		   ))))
	    testnames))

;; speed up for common cases with a little logic
;; NB// Ultimately this will be deprecated in deference to mt:test-set-state-status-by-id
;;
(define (db:test-set-state-status-by-id dbstruct run-id test-id newstate newstatus newcomment)
;; ;; speed up for common cases with a little logic
;; ;; NB// Ultimately this will be deprecated in deference to mt:test-set-state-status-by-id
;; ;;
(define (db:test-set-state-status dbstruct run-id test-id newstate newstatus newcomment)
  (db:with-db
   dbstruct
   run-id
   #t
   (lambda (db)
     (cond
      ((and newstate newstatus newcomment)
       (sqlite3:execute db "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;" newstate newstatus newcomment ;; (sdb:qry 'getid newcomment)
			test-id))
      ((and newstate newstatus)
       (sqlite3:execute db "UPDATE tests SET state=?,status=? WHERE id=?;" newstate newstatus test-id))
      (else
       (if newstate   (sqlite3:execute db "UPDATE tests SET state=?   WHERE id=?;" newstate   test-id))
       (if newstatus  (sqlite3:execute db "UPDATE tests SET status=?  WHERE id=?;" newstatus  test-id))
       (if newcomment (sqlite3:execute db "UPDATE tests SET comment=? WHERE id=?;" newcomment ;; (sdb:qry 'getid newcomment)
				       test-id))))
     (mt:process-triggers run-id test-id newstate newstatus))))
				       test-id))))))
  (mt:process-triggers dbstruct run-id test-id newstate newstatus))

;; NEW BEHAVIOR: Count tests running in all runs!
;;
(define (db:get-count-tests-running dbstruct run-id)
  (db:with-db
   dbstruct
   run-id

   #f
   (lambda (db)
     (sqlite3:first-result
      db
      "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? AND NOT (uname = 'n/a' AND item_path = '') AND testname=?;" run-id testname))))

(define (db:get-count-tests-running-in-jobgroup dbstruct run-id jobgroup)
  (let* ((dbdat (db:get-db dbstruct #f))
	 (db    (db:dbdat-get-db dbdat)))
  (if (not jobgroup)
      0 ;; 
      (let ((testnames '()))
	;; get the testnames
	;; (db:delay-if-busy dbdat)
	(sqlite3:for-each-row
	 (lambda (testname)
	   (set! testnames (cons testname testnames)))
	 db
	 "SELECT testname FROM test_meta WHERE jobgroup=?"
	 jobgroup)
	(db:with-db
	 dbstruct #f #f
	 (lambda (db)
	   (sqlite3:for-each-row
	    (lambda (testname)
	      (set! testnames (cons testname testnames)))
	    db
	    "SELECT testname FROM test_meta WHERE jobgroup=?"
	    jobgroup)))
	;; get the jobcount NB// EXTEND THIS TO OPPERATE OVER ALL RUNS?
	(if (not (null? testnames))
	    (db:with-db
	     dbstruct
	     run-id
	     #f
	     (lambda (db)
	       (sqlite3:first-result
		db
		(conc "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND testname in ('"
		      (string-intersperse testnames "','")
		      "') AND NOT (uname = 'n/a' AND item_path='');")) ;; should this include the (uname = 'n/a' ...) ???
	       ))
	    0)))))
	    0))))
             ;; DEBUG FIXME - need to merge this v.155 query correctly   
             ;; AND testname in (SELECT testname FROM test_meta WHERE jobgroup=?)
             ;; AND NOT (uname = 'n/a' AND item_path = '');"

;; tags: '("tag%" "tag2" "%ag6")
;;

;; done with run when:
;;   0 tests in LAUNCHED, NOT_STARTED, REMOTEHOSTSTART, RUNNING
(define (db:estimated-tests-remaining dbstruct run-id)

(define db:test-record-qry-selector (string-intersperse db:test-record-fields ","))


;; NOTE: Use db:test-get* to access records
;; NOTE: This needs rundir decoding? Decide, decode here or where used? For the moment decode where used.
(define (db:get-all-tests-info-by-run-id dbstruct run-id)
  (let* ((dbdat (if (vector? dbstruct)
		    (db:get-db dbstruct run-id)
		    dbstruct)) ;; still settling on when to use dbstruct or dbdat
  (let* ((res '()))
    (db:with-db
     dbstruct #f #f
	 (db    (db:dbdat-get-db dbdat))
	 (res '()))
    ;; (db:delay-if-busy dbdat)
    (sqlite3:for-each-row
     (lambda (id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment shortdir attemptnum archived)
       ;;                 0    1       2      3      4        5       6      7        8     9     10      11          12          13       14     15        16
       (set! res (cons (vector id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment shortdir attemptnum archived)
		       res)))
     db
     (conc "SELECT " db:test-record-qry-selector " FROM tests WHERE state != 'DELETED' AND run_id=?;")
     run-id)
     (lambda (db)
       (sqlite3:for-each-row
	(lambda (id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment shortdir attemptnum archived)
	  ;;                 0    1       2      3      4        5       6      7        8     9     10      11          12          13       14     15        16
	  (set! res (cons (vector id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment shortdir attemptnum archived)
			  res)))
	db
	(conc "SELECT " db:test-record-qry-selector " FROM tests WHERE state != 'DELETED' AND run_id=?;")
	run-id)))
    res))

(define (db:replace-test-records dbstruct run-id testrecs)
  (db:with-db dbstruct run-id #t 
	      (lambda (db)
		(let* ((qmarks (string-intersperse (make-list (length db:test-record-fields) "?") ","))
		       (qrystr (conc "INSERT OR REPLACE INTO tests (" db:test-record-qry-selector ") VALUES (" qmarks ");"))

;;    if all are pass (any case) and the test status is PASS or NULL or '' then set test status to PASS.
;;    if one or more are fail (any case) then set test status to PASS, non "pass" or "fail" are ignored
(define (db:test-data-rollup dbstruct run-id test-id status)
  (let* ((dbdat      (db:get-db dbstruct run-id))
	 (db         (db:dbdat-get-db dbdat))
	 (fail-count 0)
	 (pass-count 0))
    ;; (db:delay-if-busy dbdat)
    (sqlite3:for-each-row
     (lambda (fcount pcount)
       (set! fail-count fcount)
       (set! pass-count pcount))
     db 
     "SELECT (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'fail') AS fail_count,
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (sqlite3:for-each-row
	(lambda (fcount pcount)
	  (set! fail-count fcount)
	  (set! pass-count pcount))
	db 
	"SELECT (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'fail') AS fail_count,
             (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'pass') AS pass_count;"
     test-id test-id)
    ;; Now rollup the counts to the central megatest.db
    (db:general-call dbdat 'pass-fail-counts (list pass-count fail-count test-id))
    ;; if the test is not FAIL then set status based on the fail and pass counts.
    (db:general-call dbdat 'test_data-pf-rollup (list test-id test-id test-id test-id))))
	test-id test-id)
       ;; Now rollup the counts to the central megatest.db
       (db:general-call dbstruct 'pass-fail-counts (list pass-count fail-count test-id))
       ;; if the test is not FAIL then set status based on the fail and pass counts.
       (db:general-call dbstruct 'test_data-pf-rollup (list test-id test-id test-id test-id))))))

;; each section is a rule except "final" which is the final result
;;
;; [rule-5]
;; operator in
;; section LogFileBody
;; desc Output voltage

;; foo,abl,   1.2,  1.3, 0.1
;; foo,bra,   1.2, pass, silly stuff
;; faz,bar,    10,  8mA,     ,     ,"this is a comment"
;; EOF

(define (db:csv->test-data dbstruct run-id test-id csvdata)
  (debug:print 4 *default-log-port* "test-id " test-id ", csvdata: " csvdata)
  (db:with-db
  (let* ((dbdat   (db:get-db dbstruct run-id))
	 (db      (db:dbdat-get-db dbdat))
	 (csvlist (csv->list (make-csv-reader
			      (open-input-string csvdata)
			      '((strip-leading-whitespace? #t)
				(strip-trailing-whitespace? #t)))))) ;; (csv->list csvdata)))
    (for-each
     (lambda (csvrow)
       (let* ((padded-row  (take (append csvrow (list #f #f #f #f #f #f #f #f #f)) 9))
	      (category    (list-ref padded-row 0))
	      (variable    (list-ref padded-row 1))
	      (value       (any->number-if-possible (list-ref padded-row 2)))
	      (expected    (any->number-if-possible (list-ref padded-row 3)))
	      (tol         (any->number-if-possible (list-ref padded-row 4))) ;; >, <, >=, <=, or a number
	      (units       (list-ref padded-row 5))
	      (comment     (list-ref padded-row 6))
	      (status      (let ((s (list-ref padded-row 7)))
			     (if (and (string? s)(or (string-match (regexp "^\\s*$") s)
						     (string-match (regexp "^n/a$") s)))
				 #f
				 s))) ;; if specified on the input then use, else calculate
	      (type        (list-ref padded-row 8)))
	 ;; look up expected,tol,units from previous best fit test if they are all either #f or ''
	 (debug:print 4 *default-log-port* "BEFORE: category: " category " variable: " variable " value: " value 
		      ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment " type: " type)
	 
	 (if (and (or (not expected)(equal? expected ""))
		  (or (not tol)     (equal? expected ""))
		  (or (not units)   (equal? expected "")))
	     (let-values (((new-expected new-tol new-units)(tdb:get-prev-tol-for-test #f test-id category variable)))
			 (set! expected new-expected)
			 (set! tol      new-tol)
			 (set! units    new-units)))
	 
	 (debug:print 4 *default-log-port* "AFTER:  category: " category " variable: " variable " value: " value 
		      ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment)
	 ;; calculate status if NOT specified
	 (if (and (not status)(number? expected)(number? value)) ;; need expected and value to be numbers
	     (if (number? tol) ;; if tol is a number then we do the standard comparison
		 (let* ((max-val (+ expected tol))
			(min-val (- expected tol))
			(result  (and (>=  value min-val)(<= value max-val))))
		   (debug:print 4 *default-log-port* "max-val: " max-val " min-val: " min-val " result: " result)
		   (set! status (if result "pass" "fail")))
		 (set! status ;; NB// need to assess each one (i.e. not return operator since need to act if not valid op.
		       (case (string->symbol tol) ;; tol should be >, <, >=, <=
			 ((>)  (if (>  value expected) "pass" "fail"))
			 ((<)  (if (<  value expected) "pass" "fail"))
			 ((>=) (if (>= value expected) "pass" "fail"))
			 ((<=) (if (<= value expected) "pass" "fail"))
			 (else (conc "ERROR: bad tol comparator " tol))))))
	 (debug:print 4 *default-log-port* "AFTER2: category: " category " variable: " variable " value: " value 
		      ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment)
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:execute db "INSERT OR REPLACE INTO test_data (test_id,category,variable,value,expected,tol,units,comment,status,type) VALUES (?,?,?,?,?,?,?,?,?,?);"
			  test-id category variable value expected tol units (if comment comment "") status type)))
     csvlist)))
   dbstruct #f #f
   (lambda (db)
     (let* ((csvlist (csv->list (make-csv-reader
				 (open-input-string csvdata)
				 '((strip-leading-whitespace? #t)
				   (strip-trailing-whitespace? #t)))))) ;; (csv->list csvdata)))
       (for-each
	(lambda (csvrow)
	  (let* ((padded-row  (take (append csvrow (list #f #f #f #f #f #f #f #f #f)) 9))
		 (category    (list-ref padded-row 0))
		 (variable    (list-ref padded-row 1))
		 (value       (any->number-if-possible (list-ref padded-row 2)))
		 (expected    (any->number-if-possible (list-ref padded-row 3)))
		 (tol         (any->number-if-possible (list-ref padded-row 4))) ;; >, <, >=, <=, or a number
		 (units       (list-ref padded-row 5))
		 (comment     (list-ref padded-row 6))
		 (status      (let ((s (list-ref padded-row 7)))
				(if (and (string? s)(or (string-match (regexp "^\\s*$") s)
							(string-match (regexp "^n/a$") s)))
				    #f
				    s))) ;; if specified on the input then use, else calculate
		 (type        (list-ref padded-row 8)))
	    ;; look up expected,tol,units from previous best fit test if they are all either #f or ''
	    (debug:print 4 *default-log-port* "BEFORE: category: " category " variable: " variable " value: " value 
			 ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment " type: " type)
	    
	    (if (and (or (not expected)(equal? expected ""))
		     (or (not tol)     (equal? expected ""))
		     (or (not units)   (equal? expected "")))
		(let-values (((new-expected new-tol new-units)(tdb:get-prev-tol-for-test #f test-id category variable)))
		  (set! expected new-expected)
		  (set! tol      new-tol)
		  (set! units    new-units)))
	    
	    (debug:print 4 *default-log-port* "AFTER:  category: " category " variable: " variable " value: " value 
			 ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment)
	    ;; calculate status if NOT specified
	    (if (and (not status)(number? expected)(number? value)) ;; need expected and value to be numbers
		(if (number? tol) ;; if tol is a number then we do the standard comparison
		    (let* ((max-val (+ expected tol))
			   (min-val (- expected tol))
			   (result  (and (>=  value min-val)(<= value max-val))))
		      (debug:print 4 *default-log-port* "max-val: " max-val " min-val: " min-val " result: " result)
		      (set! status (if result "pass" "fail")))
		    (set! status ;; NB// need to assess each one (i.e. not return operator since need to act if not valid op.
		      (case (string->symbol tol) ;; tol should be >, <, >=, <=
			((>)  (if (>  value expected) "pass" "fail"))
			((<)  (if (<  value expected) "pass" "fail"))
			((>=) (if (>= value expected) "pass" "fail"))
			((<=) (if (<= value expected) "pass" "fail"))
			(else (conc "ERROR: bad tol comparator " tol))))))
	    (debug:print 4 *default-log-port* "AFTER2: category: " category " variable: " variable " value: " value 
			 ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment)
	    ;; (db:delay-if-busy dbdat)
	    (sqlite3:execute db "INSERT OR REPLACE INTO test_data (test_id,category,variable,value,expected,tol,units,comment,status,type) VALUES (?,?,?,?,?,?,?,?,?,?);"
			     test-id category variable value expected tol units (if comment comment "") status type)))
	csvlist)))))

;; This routine moved from tdb.scm, tdb:read-test-data
;;
(define (db:read-test-data dbstruct run-id test-id categorypatt)
  (let* ((dbdat      (db:get-db dbstruct run-id))
	 (db         (db:dbdat-get-db dbdat))
	 (res '()))
    ;; (db:delay-if-busy dbdat)
    (sqlite3:for-each-row 
     (lambda (id test_id category variable value expected tol units comment status type)
       (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
     db
     "SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
    (reverse res)))
  (let* ((res '()))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (sqlite3:for-each-row 
	(lambda (id test_id category variable value expected tol units comment status type)
	  (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	db
	"SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
       (reverse res)))))

;;======================================================================
;; Misc. test related queries
;;======================================================================

(define (db:get-run-ids-matching-target dbstruct keynames target res runname testpatt statepatt statuspatt)
  (db:with-db
  (let* ((dbdat    (db:get-db dbstruct #f))
	 (db       (db:dbdat-get-db dbdat))
	 (row-ids '())
	 (keystr (string-intersperse 
		  (map (lambda (key val)
			 (conc key " like '" val "'"))
		       keynames 
		       (string-split target "/"))
		  " AND "))
	 ;; (testqry (tests:match->sqlqry testpatt))
	 (runsqry (sqlite3:prepare db (conc "SELECT id FROM runs WHERE " keystr " AND runname LIKE '" runname "';"))))
    ;; (debug:print 8 *default-log-port* "db:test-get-paths-matching-keynames-target-new\n  runsqry=" runsqry "\n  tstsqry=" testqry)
    (sqlite3:for-each-row
     (lambda (rid)
       (set! row-ids (cons rid row-ids)))
     runsqry)
    (sqlite3:finalize! runsqry)
    row-ids))
   dbstruct #f #f
   (lambda (db)
     (let* ((row-ids '())
	    (keystr (string-intersperse 
		     (map (lambda (key val)
			    (conc key " like '" val "'"))
			  keynames 
			  (string-split target "/"))
		     " AND "))
	    ;; (testqry (tests:match->sqlqry testpatt))
	    (runsqry (sqlite3:prepare db (conc "SELECT id FROM runs WHERE " keystr " AND runname LIKE '" runname "';"))))
       ;; (debug:print 8 *default-log-port* "db:test-get-paths-matching-keynames-target-new\n  runsqry=" runsqry "\n  tstsqry=" testqry)
       (sqlite3:for-each-row
	(lambda (rid)
	  (set! row-ids (cons rid row-ids)))
	runsqry)
       (sqlite3:finalize! runsqry)
       row-ids))))

;; finds latest matching all patts for given run-id
;;
(define (db:test-get-paths-matching-keynames-target-new dbstruct run-id keynames target res testpatt statepatt statuspatt runname)
  (let* ((testqry (tests:match->sqlqry testpatt))
	 (tstsqry (conc "SELECT rundir FROM tests WHERE run_id=? AND " testqry " AND state LIKE '" statepatt "' AND status LIKE '" statuspatt "' ORDER BY event_time ASC;")))
    (db:with-db

	 (begin
	   (debug:print-error 0 *default-log-port* "reception failed. Received \"" msg "\" but cannot translate it.")
           (print-call-chain (current-error-port))
	   msg))) ;; crude reply for when things go awry
    ((zmq nmsg)(with-input-from-string msg (lambda ()(deserialize))))
    (else msg))) ;; rpc

;; This is to be the big daddy call

(define (db:test-set-status-state dbstruct run-id test-id status state msg)
  (let ((dbdat  (db:get-db dbstruct run-id)))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
	(db:general-call dbdat 'set-test-start-time (list test-id)))
    ;; (if msg
    ;; 	(db:general-call dbdat 'state-status-msg (list state status msg test-id))
    ;; 	(db:general-call dbdat 'state-status     (list state status test-id)))
    (db:set-state-status-and-roll-up-items dbstruct run-id test-id #f state status msg)
    ;; process the test_data table
    (if (and test-id state status (equal? status "AUTO")) 
	(db:test-data-rollup dbstruct run-id test-id status))
    (mt:process-triggers run-id test-id state status)))
;; ; This is to be the big daddy call NOPE: Replaced by db:set-state-status-and-roll-up-items
;; ;
;; define (db:test-set-state-status dbstruct run-id test-id state status msg)
;;  (let ((dbdat  (db:get-db dbstruct run-id)))
;;    (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
;; 	(db:general-call dbdat 'set-test-start-time (list test-id)))
;;    ;; (if msg
;;    ;; 	(db:general-call dbdat 'state-status-msg (list state status msg test-id))
;;    ;; 	(db:general-call dbdat 'state-status     (list state status test-id)))
;;    (db:set-state-status-and-roll-up-items dbstruct run-id test-id #f state status msg)
;;    ;; process the test_data table
;;    (if (and test-id state status (equal? status "AUTO")) 
;; 	(db:test-data-rollup dbstruct run-id test-id status))
;;    (mt:process-triggers dbstruct run-id test-id state status)))

;; state is the priority rollup of all states
;; status is the priority rollup of all completed statesfu
;;
;; if test-name is an integer work off that instead of test-name test-path
;;
(define (db:set-state-status-and-roll-up-items dbstruct run-id test-name item-path state status comment)
  ;; establish info on incoming test followed by info on top level test
  (let* ((db           (db:dbdat-get-db (dbr:dbstruct-tmpdb dbstruct)))
	 (testdat      (if (number? test-name)
  (let* ((testdat      (if (number? test-name)
			   (db:get-test-info-by-id dbstruct run-id test-name) ;; test-name is actually a test-id
			   (db:get-test-info       dbstruct run-id test-name item-path)))
	 (test-id      (db:test-get-id testdat))
	 (test-name    (if (number? test-name)
			   (db:test-get-testname testdat)
			   test-name))
	 (item-path    (db:test-get-item-path testdat))
         (tl-testdat   (db:get-test-info dbstruct run-id test-name ""))
         (tl-test-id   (db:test-get-id tl-testdat)))
    (sqlite3:with-transaction
     db
     (lambda ()
       (db:test-set-state-status-by-id dbstruct run-id test-id state status comment)
       (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
	   (let* ((state-status-counts  (db:get-all-state-status-counts-for-test db run-id test-name item-path)) ;; item-path is used to exclude current state/status of THIS test
		  (running              (length (filter (lambda (x)
							  (member (dbr:counts-state x) *common:running-states*))
							state-status-counts)))
		  (bad-not-started      (length (filter (lambda (x)
							  (and (equal? (dbr:counts-state x) "NOT_STARTED")
							       (not (member (dbr:counts-status x)
									    *common:not-started-ok-statuses*))))
							state-status-counts)))
		  (all-curr-states   (common:special-sort  ;; worst -> best (sort of)
                                      (delete-duplicates
                                       (cons state (map dbr:counts-state state-status-counts)))
                                      *common:std-states* >))
                  (all-curr-statuses (common:special-sort  ;; worst -> best
                                      (delete-duplicates
				       (cons status (map dbr:counts-status state-status-counts)))
				      *common:std-statuses* >))
		  (newstate          (if (> running 0)
					 "RUNNING"
					 (if (> bad-not-started 0)
					     "COMPLETED"
					     (car all-curr-states))))
		  (newstatus         (if (> bad-not-started 0)
					 "CHECK"
					 (car all-curr-statuses))))
	     ;; (print "Setting toplevel to: " newstate "/" newstatus)
	     (db:test-set-state-status-by-id dbstruct run-id tl-test-id newstate newstatus #f)))))))

         (tl-test-id   (db:test-get-id tl-testdat))
	 (db           (db:dbdat-get-db  (db:get-db dbstruct #f))))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
	(db:general-call dbstruct 'set-test-start-time (list test-id)))
    (mutex-lock! *db-transaction-mutex*)
    (let ((tr-res
	   (sqlite3:with-transaction
	    db
	    (lambda ()
	      ;; (db:test-set-state-status-by-id dbstruct run-id test-id state status comment)
	      (db:test-set-state-status dbstruct run-id test-id state status comment)
	      (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
		  (let* ((state-status-counts  (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path)) ;; item-path is used to exclude current state/status of THIS test
			 (running              (length (filter (lambda (x)
								 (member (dbr:counts-state x) *common:running-states*))
							       state-status-counts)))
			 (bad-not-started      (length (filter (lambda (x)
								 (and (equal? (dbr:counts-state x) "NOT_STARTED")
								      (not (member (dbr:counts-status x)
										   *common:not-started-ok-statuses*))))
								  state-status-counts)))
			 (all-curr-states   (common:special-sort  ;; worst -> best (sort of)
					     (delete-duplicates
					      (cons state (map dbr:counts-state state-status-counts)))
					     *common:std-states* >))
			 (all-curr-statuses (common:special-sort  ;; worst -> best
					     (delete-duplicates
					      (cons status (map dbr:counts-status state-status-counts)))
					     *common:std-statuses* >))
			 (newstate          (if (> running 0)
						"RUNNING"
						(if (> bad-not-started 0)
						    "COMPLETED"
						    (car all-curr-states))))
			 (newstatus         (if (> bad-not-started 0)
						"CHECK"
						(car all-curr-statuses))))
		    ;; (print "Setting toplevel to: " newstate "/" newstatus)
		    (db:test-set-state-status dbstruct run-id tl-test-id newstate newstatus #f)))))))
      (mutex-unlock! *db-transaction-mutex*)
(define db:roll-up-pass-fail-counts db:set-state-status-and-roll-up-items)

      (if (and test-id state status (equal? status "AUTO")) 
;; call with state = #f to roll up with out accounting for state/status of this item
;;
;;    (define (db:roll-up-pass-fail-counts dbstruct run-id test-name item-path state status)
;;      (if (not (equal? item-path "")) ;; if asked to do this for a specific item then do an incremental update
;;          (let* ((dbdat         (db:get-db dbstruct run-id))
;;                 (toptestdat    (db:get-test-info dbstruct run-id test-name item-path))
;;                 (currtopstate  (db:test-get-state toptestdat))
;;                 (currtopstatus (db:test-get-status toptestdat))
;;                 (nextss        (common:apply-state-status currtopstate currtopstatus state status))
;;                 (newtopstate   (car nextss))  ;; #f or a symbol
;;                 (newtopstatus  (cdr nextss))) ;; #f or a symbol
;;            (if (not newtopstate) ;; need to calculate it
;;                
;;            ;; We rely on the toplevel to track status as state varies. I.e. preserve an ABORT
;;            
;;                 
;;    	;;	(db    (db:dbdat-get-db dbdat)))
;;    	(db:general-call dbdat 'update-pass-fail-counts (list test-name test-name test-name))
;;    	(db:top-test-set-per-pf-counts dbstruct run-id test-name))))
	  (db:test-data-rollup dbstruct run-id test-id status))
;;      
;;    ;;     (case (string->symbol status)
;;    ;;       ((RUNNING)  (db:general-call dbdat 'top-test-set-running (list test-name)))
;;    ;;       ((LAUNCHED) (db:general-call dbdat 'top-test-set (list "LAUNCHED" test-name)))
;;    ;;       ((ABORT INCOMPLETE) (db:general-call dbdat 'top-test-set (list status test-name))))
;;        
;;    ;;     (if (or (not state)
;;    ;; 	    (not (equal? item-path "")))
;;    ;; 	;; just do a rollup
;;    ;; 	(begin
;;    ;; 	  (db:top-test-set-per-pf-counts dbdat run-id test-name)
;;    ;; 	  #f)
;;    ;; 	(begin
;;    ;; 	  ;; NOTE: No else clause needed for this case
;;    ;; 	  (case (string->symbol status)
;;    ;; 	    ((RUNNING)  (db:general-call dbdat 'top-test-set-running (list test-name)))
;;    ;; 	    ((LAUNCHED) (db:general-call dbdat 'top-test-set (list "LAUNCHED" test-name)))
;;    ;; 	    ((ABORT INCOMPLETE) (db:general-call dbdat 'top-test-set (list status test-name))))
;;    ;; 	  #f)
;;    ;; 	)))
      tr-res)))

(define (db:get-all-state-status-counts-for-test db run-id test-name item-path)
  (sqlite3:map-row
   (lambda (state status count)
     (make-dbr:counts state: state status: status count: count))
   db
   "SELECT state,status,count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND item_path !=? GROUP BY state,status;"
   run-id test-name item-path))
(define (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path)
  (db:with-db
   dbstruct #f #f
   (lambda (db)
     (sqlite3:map-row
      (lambda (state status count)
	(make-dbr:counts state: state status: status count: count))
      db
      "SELECT state,status,count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND item_path !=? GROUP BY state,status;"
      run-id test-name item-path))))


(define (db:get-all-item-states db run-id test-name)
  (sqlite3:map-row 
   (lambda (a) a)
   db
   "SELECT DISTINCT state FROM tests WHERE item_path != '' AND state != 'DELETED' AND run_id=? AND testname=?"
   run-id test-name))

(define (db:get-all-item-statuses db run-id test-name)
  (sqlite3:map-row 
   (lambda (a) a)
   db
   "SELECT DISTINCT status FROM tests WHERE item_path != '' AND state != 'DELETED' AND state='COMPLETED' AND run_id=? AND testname=?"
   run-id test-name))
;; (define (db:get-all-item-states db run-id test-name)
;;   (sqlite3:map-row 
;;    (lambda (a) a)
;;    db
;;    "SELECT DISTINCT state FROM tests WHERE item_path != '' AND state != 'DELETED' AND run_id=? AND testname=?"
;;    run-id test-name))
;; 
;; (define (db:get-all-item-statuses db run-id test-name)
;;   (sqlite3:map-row 
;;    (lambda (a) a)
;;    db
;;    "SELECT DISTINCT status FROM tests WHERE item_path != '' AND state != 'DELETED' AND state='COMPLETED' AND run_id=? AND testname=?"
;;    run-id test-name))

(define (db:test-get-logfile-info dbstruct run-id test-name)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)

	  "UPDATE tests SET state='DELETED' WHERE state=?")
	'(tests:test-set-toplog   "UPDATE tests SET final_logf=? WHERE run_id=? AND testname=? AND item_path='';")
	'(update-cpuload-diskfree "UPDATE tests SET cpuload=?,diskfree=? WHERE id=?;") ;; DONE
	'(update-uname-host       "UPDATE tests SET uname=?,host=? WHERE id=?;")       ;; DONE
        '(update-test-rundat      "INSERT INTO test_rundat (test_id,update_time,cpuload,diskfree,diskusage,run_duration) VALUES (?,?,?,?,?,?);")
	'(update-test-state       "UPDATE tests SET state=? WHERE state=? AND run_id=? AND testname=? AND NOT (item_path='' AND testname IN (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")
	'(update-test-status      "UPDATE tests SET status=? WHERE status like ? AND run_id=? AND testname=? AND NOT (item_path='' AND testname IN (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")
	;; stuff for roll-up-pass-fail-counts
	;; stuff for set-state-status-and-roll-up-items
	'(update-pass-fail-counts "UPDATE tests 
             SET fail_count=(SELECT count(id) FROM tests WHERE testname=? AND item_path != '' AND status IN ('FAIL','CHECK','INCOMPLETE','ABORT')),
                 pass_count=(SELECT count(id) FROM tests WHERE testname=? AND item_path != '' AND status IN ('PASS','WARN','WAIVED'))
             WHERE testname=? AND item_path='' AND run_id=?;") ;; DONE  ;; BROKEN!!! NEEDS run-id
	'(top-test-set-running  "UPDATE tests SET state='RUNNING' WHERE testname=? AND item_path='' AND run_id=?;") ;; DONE   ;; BROKEN!!! NEEDS run-id

(define (db:lookup-query qry-name)
  (let ((q (alist-ref qry-name db:queries)))
    (if q (car q) #f)))

;; do not run these as part of the transaction
(define db:special-queries   '(rollup-tests-pass-fail
			       ;; db:roll-up-pass-fail-counts  ;; WHY NOT!?
			       ;; db:set-state-status-and-roll-up-items  ;; WHY NOT!?
			       login
			       immediate
			       flush
			       sync
			       set-verbosity
			       killserver
			       ))

(define (db:login dbstruct calling-path calling-version client-signature)
  (cond 
   ((not (equal? calling-path *toppath*))
    (list #f "Login failed due to mismatch paths: " calling-path ", " *toppath*))
   ;; ((not (equal? *run-id* run-id))
   ;;  (list #f "Login failed due to mismatch run-id: " run-id ", " *run-id*))
   ((not (equal? megatest-version calling-version))
    (list #f "Login failed due to mismatch megatest version: " calling-version ", " megatest-version))
   (else
    (hash-table-set! *logged-in-clients* client-signature (current-seconds))
    '(#t "successful login"))))

(define (db:general-call dbdat stmtname params)
(define (db:general-call dbstruct stmtname params)
  (let ((query (let ((q (alist-ref (if (string? stmtname)
				       (string->symbol stmtname)
				       stmtname)
				   db:queries)))
 		 (if q (car q) #f))))
    ;; (db:delay-if-busy dbdat)
    (apply sqlite3:execute (db:dbdat-get-db dbdat) query params)
    #t))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (apply sqlite3:execute db query params)
       #t))))

;; get a summary of state and status counts to calculate a rollup
;;
;; NOTE: takes a db, not a dbstruct
;;
(define (db:get-state-status-summary db run-id testname)
(define (db:get-state-status-summary dbstruct run-id testname)
  (let ((res   '()))
    (db:with-db
     dbstruct #f #f
    (sqlite3:for-each-row
     (lambda (state status count)
       (set! res (cons (vector state status count) res)))
     db
     "SELECT state,status,count(state) FROM tests WHERE run_id=? AND testname=? AND item_path='' GROUP BY state,status;"
     run-id testname)
    res))
     (sqlite3:for-each-row
      (lambda (state status count)
	(set! res (cons (vector state status count) res)))
      db
      "SELECT state,status,count(state) FROM tests WHERE run_id=? AND testname=? AND item_path='' GROUP BY state,status;"
      run-id testname)
     res)))


(define (db:get-latest-host-load dbstruct raw-hostname)
  (let* ((hostname (string-substitute "\\..*$" "" raw-hostname))
        (res  (cons -1 0))
        (mydb (db:dbdat-get-db (db:get-db dbstruct 0)))
        )
    (db:with-db
     dbstruct
     0
     #f
     (lambda (db)
       (sqlite3:for-each-row
        (lambda (cpuload update-time)  (set! res (cons cpuload update-time)))
        db
        "SELECT tr.cpuload, tr.update_time FROM test_rundat tr, tests t WHERE t.host=? AND tr.cpuload != -1  AND tr.test_id=t.id ORDER BY tr.update_time DESC LIMIT 1;"
        hostname))) res ))


(define (db:set-top-level-from-items dbstruct run-id testname)
  (let* ((dbdat (db:get-db dbstruct run-id))
	 (db    (db:dbdat-get-db dbdat))
	 (summ  (db:get-state-status-summary db run-id testname))
  (let* ((summ  (db:get-state-status-summary dbstruct run-id testname))
	 (find  (lambda (state status)
		  (if (null? summ) 
		      #f
		      (let loop ((hed (car summ))
				 (tal (cdr summ)))
			(if (and (string-match state  (vector-ref hed 0))
				 (string-match status (vector-ref hed 1)))

;; get the previous records for when these tests were run where all keys match but runname
;; NB// Merge this with test:get-previous-test-run-records? This one looks for all matching tests
;; can use wildcards. Also can likely be factored in with get test paths?
;;
;; Run this remotely!!
;;
(define (db:get-matching-previous-test-run-records dbstruct run-id test-name item-path)
  (let* ((dbdat   (db:get-db dbstruct #f))
	 (db      (db:dbdat-get-db dbdat))
	 (keys    (db:get-keys dbstruct))
  (let* ((keys    (db:get-keys dbstruct))
	 (selstr  (string-intersperse keys ","))
	 (qrystr  (string-intersperse (map (lambda (x)(conc x "=?")) keys) " AND "))
	 (keyvals #f)
	 (tests-hash (make-hash-table)))
    ;; first look up the key values from the run selected by run-id
    ;; (db:delay-if-busy dbdat)
    (sqlite3:for-each-row 
     (lambda (a . b)
       (set! keyvals (cons a b)))
     db
     (conc "SELECT " selstr " FROM runs WHERE id=? ORDER BY event_time DESC;") run-id)
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (sqlite3:for-each-row 
	(lambda (a . b)
	  (set! keyvals (cons a b)))
	db
	(conc "SELECT " selstr " FROM runs WHERE id=? ORDER BY event_time DESC;") run-id)))
    (if (not keyvals)
	'()
	(let ((prev-run-ids '()))
	  (db:with-db
	   dbstruct #f #f
	   (lambda (db)
	  (apply sqlite3:for-each-row
		 (lambda (id)
		   (set! prev-run-ids (cons id prev-run-ids)))
		 db
		 (conc "SELECT id FROM runs WHERE " qrystr " AND id != ?;") (append keyvals (list run-id)))
	     (apply sqlite3:for-each-row
		    (lambda (id)
		      (set! prev-run-ids (cons id prev-run-ids)))
		    db
		    (conc "SELECT id FROM runs WHERE " qrystr " AND id != ?;") (append keyvals (list run-id)))))
	  ;; collect all matching tests for the runs then
	  ;; extract the most recent test and return that.
	  (debug:print 4 *default-log-port* "selstr: " selstr ", qrystr: " qrystr ", keyvals: " keyvals 
		       ", previous run ids found: " prev-run-ids)
	  (if (null? prev-run-ids) '()  ;; no previous runs? return null
	      (let loop ((hed (car prev-run-ids))
			 (tal (cdr prev-run-ids)))

;;======================================================================
;; Tests meta data
;;======================================================================

;; returns a hash table of tags to tests
;;
(define (db:get-tests-tags dbstruct)
  (db:with-db
  (let* ((dbdat   (db:get-db dbstruct #f))
	 (db      (db:dbdat-get-db dbdat))
         (res     (make-hash-table)))
    (sqlite3:for-each-row
     (lambda (testname tags-in)
       (let ((tags (string-split tags-in ",")))
         (for-each
          (lambda (tag)
            (hash-table-set! res tag
                             (delete-duplicates
                              (cons testname (hash-table-ref/default res tag '())))))
          tags)))
     db
     "SELECT testname,tags FROM test_meta")
    res))
   dbstruct #f #f
   (lambda (db)
     (let* ((res     (make-hash-table)))
       (sqlite3:for-each-row
	(lambda (testname tags-in)
	  (let ((tags (string-split tags-in ",")))
	    (for-each
	     (lambda (tag)
	       (hash-table-set! res tag
				(delete-duplicates
				 (cons testname (hash-table-ref/default res tag '())))))
	     tags)))
	db
	"SELECT testname,tags FROM test_meta")
       res))))

;; read the record given a testname
(define (db:testmeta-get-record dbstruct testname)
  (let ((res   #f))
    (db:with-db
     dbstruct
     #f

		  (debug:print-info 2 *default-log-port* "Test NOT logged as COMPLETED, (state=" (db:test-get-state testinfo) "), updating result, rollup-status is " rollup-status)
		  (tests:test-set-status! test-id 
					  new-state
					  new-status
					  (args:get-arg "-m") #f)
		  ;; need to update the top test record if PASS or FAIL and this is a subtest
		  (if (not (equal? item-path ""))
		      (cdb:roll-up-pass-fail-counts *runremote* run-id test-name item-path new-status))))
		      (cdb:set-state-status-and-roll-up-items *runremote* run-id test-name item-path new-status))))
	    ;; for automated creation of the rollup html file this is a good place...
	    (if (not (equal? item-path ""))
		(tests:summarize-items #f run-id test-id test-name #f)) ;; don't force - just update if no
	    )))
    (pop-directory)
    rollup-status))

;;   the comment can be set in the step record in launch.scm
;;
(define (launch:load-logpro-dat run-id test-id stepname)
  (let ((cname (conc stepname ".dat")))
    (if (file-exists? cname)
	(let* ((dat  (read-config cname #f #f))
	       (csvr (db:logpro-dat->csv dat stepname))
	       (csvt (let-values (( (fmt-cell fmt-record fmt-csv) (make-format ",")))
				 (fmt-csv (map list->csv-record csvr))))
	       (csvt (let-values (((fmt-cell fmt-record fmt-csv) (make-format ",")))
		       (fmt-csv (map list->csv-record csvr))))
	       (status (configf:lookup dat "final" "exit-status"))
	       (msg     (configf:lookup dat "final" "message")))
          ;;(if csvt  ;; this if blocked stack dump caused by .dat file from logpro being 0-byte.  fixed by upgrading logpro
          (if csvt  ;; this if blocked stack dump caused by .dat file from logpro being 0-byte.  fixed by upgrading logpro
              (rmt:csv->test-data run-id test-id csvt)
	      (debug:print 0 *default-log-port* "ERROR: no csvdat exists for run-id: " run-id " test-id: " test-id " stepname: " stepname ", check that logpro version is 1.15 or newer"))
            ;;  (BB> "Error: run-id/test-id/stepname="run-id"/"test-id"/"stepname" => bad csvr="csvr)
            ;;  )
	  ;;  (BB> "Error: run-id/test-id/stepname="run-id"/"test-id"/"stepname" => bad csvr="csvr)
	  ;;  )
	  (cond
	   ((equal? status "PASS") "PASS") ;; skip the message part if status is pass
	   (status (conc (configf:lookup dat "final" "exit-status") ": " (if msg msg "no message")))
	   (else #f)))
	#f)))

(define (launch:runstep ezstep run-id test-id exit-info m tal testconfig)

  ;; (tests:test-set-status! test-id "RUNNING" "n/a" #f #f)
  ;; Since we should have a clean slate at this time there is no need to do 
  ;; any of the other stuff that tests:test-set-status! does. Let's just 
  ;; force RUNNING/n/a

  ;; (thread-sleep! 0.3)
  ;; (tests:test-force-state-status! run-id test-id "RUNNING" "n/a")
  (rmt:roll-up-pass-fail-counts run-id test-name item-path #f "RUNNING" #f) 
  (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "RUNNING" #f) 
  ;; (thread-sleep! 0.3) ;; NFS slowness has caused grief here

  ;; if there is a runscript do it first
  (if fullrunscript
      (let ((pid (process-run fullrunscript)))
	(rmt:test-set-top-process-pid run-id test-id pid)
	(let loop ((i 0))

	  (let ((sighand (lambda (signum)
			   ;; (signal-mask! signum) ;; to mask or not? seems to cause issues in exiting
			   (if (eq? signum signal/stop)
			       (debug:print-error 0 *default-log-port* "attempt to STOP process. Exiting."))
			   (set! *time-to-exit* #t)
			   (print "Received signal " signum ", cleaning up before exit. Please wait...")
			   (let ((th1 (make-thread (lambda ()
						     (tests:test-force-state-status! run-id test-id "INCOMPLETE" "KILLED")
						     (rmt:test-set-state-status run-id test-id "INCOMPLETE" "KILLED" #f)
						     (print "Killed by signal " signum ". Exiting")
						     (thread-sleep! 1)
						     (exit 1))))
				 (th2 (make-thread (lambda ()
						     (thread-sleep! 2)
						     (debug:print 0 *default-log-port* "Done")
						     (exit 4)))))

	  ;;
	  (let* ((test-info (rmt:get-test-info-by-id run-id test-id))
		 (test-host (db:test-get-host        test-info))
		 (test-pid  (db:test-get-process_id  test-info)))
	    (cond
	     ((member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "KILLREQ" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	      (debug:print 0 *default-log-port* "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
	      (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")) ;; prime it for running
	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")
	      (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      ) ;; prime it for running
	     ((member (db:test-get-state test-info) '("RUNNING" "REMOTEHOSTSTART"))
	      (if (process:alive-on-host? test-host test-pid)
		  (debug:print-error 0 *default-log-port* "test state is "  (db:test-get-state test-info) " and process " test-pid " is still running on host " test-host ", cannot proceed")
		  (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")))
		  ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")
		  (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
		  ))
	     ((not (member (db:test-get-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ")))
	      (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a"))
	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")
	      (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      )
	     (else ;; (member (db:test-get-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ"))
	      (debug:print-error 0 *default-log-port* "test state is " (db:test-get-state test-info) ", cannot proceed")
	      (exit))))
	  
	  (debug:print 2 *default-log-port* "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process

		    (debug:print-info 1 *default-log-port* "Test exited in state=" (db:test-get-state testinfo) ", setting state/status based on exit code of " (launch:einf-exit-status exit-info) " and rollup-status of " (launch:einf-rollup-status exit-info))
		    (tests:test-set-status! run-id 
					    test-id 
					    new-state
					    new-status
					    (args:get-arg "-m") #f)
		    ;; need to update the top test record if PASS or FAIL and this is a subtest
		    ;; NO NEED TO CALL roll-up-pass-fail-counts HERE, THIS IS DONE IN roll-up-pass-fail-counts called by tests:test-set-status!
		    ;; NO NEED TO CALL set-state-status-and-roll-up-items HERE, THIS IS DONE IN set-state-status-and-roll-up-items called by tests:test-set-status!
		    ))
	      ;; for automated creation of the rollup html file this is a good place...
	      (if (not (equal? item-path ""))
		  (tests:summarize-items run-id test-id test-name #f))
	      (tests:summarize-test run-id test-id)  ;; don't force - just update if no
	      (rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id)))
	    (mutex-unlock! m)

			      (conc (if dir (conc dir "/") "")
				    (case (string->symbol exe)
				      ((dboard)    "../megatest")
				      ((mtest)     "../megatest")
				      ((dashboard) "megatest")
				      (else exe)))))
	   (launcher        (common:get-launcher *configdat* test-name item-path)) ;; (config-lookup *configdat* "jobtools"     "launcher"))
	   (test-sig   (conc (common:get-testsuite-name) ":" test-name ":" item-path)) ;; (item-list->path itemdat))) ;; test-path is the full path including the item-path
	   (work-area  #f)
	   (test-sig        (conc (common:get-testsuite-name) ":" test-name ":" item-path)) ;; (item-list->path itemdat))) ;; test-path is the full path including the item-path
	   (work-area       #f)
	   (toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all
	   (diskpath   #f)
	   (cmdparms   #f)
	   (fullcmd    #f) ;; (define a (with-output-to-string (lambda ()(write x))))
	   (mt-bindir-path #f)
	   (testinfo   (rmt:get-test-info-by-id run-id test-id))
	   (mt_target  (string-intersperse (map cadr keyvals) "/"))

	    (debug:print-info 0 *default-log-port* "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path)
	    (runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record
      
      ;; prevent overlapping actions - set to LAUNCHED as early as possible
      ;;
      ;; the following call handles waiver propogation. cannot yet condense into roll-up-pass-fail
      (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
      (rmt:roll-up-pass-fail-counts run-id test-name item-path #f "LAUNCHED" #f)
      (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "LAUNCHED" #f)
      ;; (pp (hash-table->alist tconfig))
      (set! diskpath (get-best-disk *configdat* tconfig))
      (if diskpath
	  (let ((dat  (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
	    (set! work-area (car dat))
	    (set! toptest-work-area (cadr dat))
	    (debug:print-info 2 *default-log-port* "Using work area " work-area))

	     (launch-results (apply (if launchwait
					process:cmd-run-with-stderr->list
					process-run)
				    (if useshell
					(let ((cmdstr (string-intersperse fullcmd " ")))
					  (if launchwait
					      cmdstr
					      (conc cmdstr " >> mt_launch.log 2>&1")))
					      (conc cmdstr " >> mt_launch.log 2>&1 &")))
					(car fullcmd))
				    (if useshell
					'()
					(cdr fullcmd)))))
        (mutex-unlock! *launch-setup-mutex*) ;; yes, really should mutex all the way to here. Need to put this entire process into a fork.
	(if (not launchwait) ;; give the OS a little time to allow the process to start
	    (thread-sleep! 0.01))

			    res)
			  (cons testn res)))))))))

;;======================================================================
;;  T R I G G E R S
;;======================================================================

(define (mt:process-triggers run-id test-id newstate newstatus)
  (let* ((test-dat      (rmt:get-test-info-by-id run-id test-id)))
(define (mt:process-triggers dbstruct run-id test-id newstate newstatus)
  (let* ((test-dat      (db:get-test-info-by-id dbstruct run-id test-id)))
    (if test-dat
	(let* ((test-rundir   ;; (rmt:sdb-qry 'getstr ;; (filedb:get-path *fdb*
		(db:test-get-rundir test-dat)) ;; ) ;; )
	       (test-name     (db:test-get-testname test-dat))
	       (tconfig       #f)
	       (state         (if newstate  newstate  (db:test-get-state  test-dat)))
	       (status        (if newstatus newstatus (db:test-get-status test-dat))))

	;;  (rmt:general-call 'state-status-msg run-id newstate newstatus newcomment test-id))
	;; ((and newstate newstatus)
	;;  (rmt:general-call 'state-status run-id newstate newstatus test-id))
	;; (else
	;;  (if newstate   (rmt:general-call 'set-test-state   run-id newstate   test-id))
	;;  (if newstatus  (rmt:general-call 'set-test-status  run-id newstatus  test-id))
	;;  (if newcomment (rmt:general-call 'set-test-comment run-id newcomment test-id))))
	(rmt:roll-up-pass-fail-counts run-id test-id #f newstate newstatus newcomment)
	(mt:process-triggers run-id test-id newstate newstatus)
	(rmt:set-state-status-and-roll-up-items run-id test-id #f newstate newstatus newcomment)
	;; (mt:process-triggers run-id test-id newstate newstatus)
	#t)))

(define (mt:test-set-state-status-by-testname run-id test-name item-path new-state new-status new-comment)
  (let ((test-id (rmt:get-test-id run-id test-name item-path)))
    (rmt:roll-up-pass-fail-counts run-id test-name item-path new-state new-status new-comment)
    (mt:process-triggers run-id test-id new-state new-status)
    (rmt:set-state-status-and-roll-up-items run-id test-name item-path new-state new-status new-comment)
    ;; (mt:process-triggers run-id test-id new-state new-status)
    #t))
	;;(mt:test-set-state-status-by-id run-id test-id new-state new-status new-comment)))

(define (mt:lazy-read-test-config test-name)
  (let ((tconf (hash-table-ref/default *testconfigs* test-name #f)))
    (if tconf
	tconf

     ;; ensure we have a record for our connection for given area
     ((not *runremote*)                     
      (set! *runremote* (make-remote))
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  1")
      (rmt:send-receive cmd rid params attemptnum: attemptnum))
     ;; ensure we have a homehost record
     ((not (pair? (remote-hh-dat *runremote*)))  ;; have a homehost record?
     ((not (pair? (remote-hh-dat *runremote*)))  ;; not on homehost
      (thread-sleep! 0.1) ;; since we shouldn't get here, delay a little
      (remote-hh-dat-set! *runremote* (common:get-homehost))
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  2")
      (rmt:send-receive cmd rid params attemptnum: attemptnum))
     ;; on homehost and this is a read
     ((and (cdr (remote-hh-dat *runremote*))   ;; on homehost

	    ;; (debug:print-info 12 *default-log-port* "rmt:send-receive, case  5.2")
	    ;; (tasks:start-and-wait-for-server (tasks:open-db) 0 15)
            ;; (rmt:send-receive cmd rid params attemptnum: attemptnum))   ;)  ;)
;;;;
     
     ;; if not on homehost ensure we have a connection to a live server
     ;; NOTE: we *have* a homehost record by now

     ((and (not (cdr (remote-hh-dat *runremote*)))        ;; not on a homehost 
           (not (remote-conndat *runremote*))             ;; and no connection
           (server:read-dotserver *toppath*))             ;; .server file exists
      ;; something caused the server entry in tdb to disappear, but the server is still running
      (server:remove-dotserver-file *toppath* ".*")
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  20")
      (rmt:send-receive cmd rid params attemptnum: (add1 attemptnum)))
     ;; ((and (not (cdr (remote-hh-dat *runremote*)))        ;; not on a homehost 
     ;;       (not (remote-conndat *runremote*))             ;; and no connection
     ;;       (server:read-dotserver *toppath*))             ;; .server file exists
     ;;  ;; something caused the server entry in tdb to disappear, but the server is still running
     ;;  (server:remove-dotserver-file *toppath* ".*")
     ;;  (mutex-unlock! *rmt-mutex*)
     ;;  (debug:print-info 12 *default-log-port* "rmt:send-receive, case  20")
     ;;  (rmt:send-receive cmd rid params attemptnum: (add1 attemptnum)))

     ((and (not (cdr (remote-hh-dat *runremote*)))        ;; not on a homehost 
           (not (remote-conndat *runremote*)))            ;; and no connection
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  6  hh-dat: " (remote-hh-dat *runremote*) " conndat: " (remote-conndat *runremote*))
      (mutex-unlock! *rmt-mutex*)
      (tasks:start-and-wait-for-server (tasks:open-db) 0 15)
      (remote-conndat-set! *runremote* (rmt:get-connection-info *toppath*)) ;; calls client:setup which calls client:setup-http
      (rmt:send-receive cmd rid params attemptnum: attemptnum)) ;; TODO: add back-off timeout as
     ;; all set up if get this far, dispatch the query
     ((cdr (remote-hh-dat *runremote*)) ;; we are on homehost
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  7")
      (rmt:open-qry-close-locally cmd (if rid rid 0) params))

     ;; not on homehost, do server query
     (else
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9")
      (mutex-lock! *rmt-mutex*)
      (let* ((conninfo (remote-conndat *runremote*))
	     (dat      (case (remote-transport *runremote*)
			 ((http) (condition-case ;; handling here has caused a lot of problems. However it is needed to deal with attemtped communication to servers that have gone away
                                  (http-transport:client-api-send-receive 0 conninfo cmd params)
                                  ((commfail)(vector #f "communications fail"))
                                  ((exn)(vector #f "other fail" (print-call-chain)))))
			 (else
			  (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport *runremote*) " not supported")
			  (exit))))
	     (success  (if (vector? dat) (vector-ref dat 0) #f))
	     (res      (if (vector? dat) (vector-ref dat 1) #f)))
	(if (vector? conninfo)(http-transport:server-dat-update-last-access conninfo)) ;; refresh access time
	;; (mutex-unlock! *rmt-mutex*)
        (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9. conninfo=" conninfo " dat=" dat)
        (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9. conninfo=" conninfo " dat=" dat " *runremote* = "*runremote*)
	(if success
	    (case (remote-transport *runremote*)
	      ((http) res)
	      ((http)
	       (mutex-unlock! *rmt-mutex*)
	       res)
	      (else
	       (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport *runremote*) " is unknown")
	       (mutex-unlock! *rmt-mutex*)
	       (exit 1)))
	    (begin
	      (debug:print 0 *default-log-port* "WARNING: communication failed. Trying again, try num: " attemptnum)
	      (remote-conndat-set!    *runremote* #f)
	      (remote-server-url-set! *runremote* #f)
              (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9.1")
	      (mutex-unlock! *rmt-mutex*)
	      (tasks:start-and-wait-for-server (tasks:open-db) 0 15)
	      (rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))))))))

(define (rmt:update-db-stats run-id rawcmd params duration)
  (mutex-lock! *db-stats-mutex*)
  (handle-exceptions
   exn

  (rmt:send-receive 'delete-test-records run-id (list run-id test-id)))

;; This is not needed as test steps are deleted on test delete call
;;
;; (define (rmt:delete-test-step-records run-id test-id)
;;   (rmt:send-receive 'delete-test-step-records run-id (list run-id test-id)))

(define (rmt:test-set-status-state run-id test-id status state msg)
  (rmt:send-receive 'test-set-status-state run-id (list run-id test-id status state msg)))
(define (rmt:test-set-state-status run-id test-id state status msg)
  (rmt:send-receive 'test-set-state-status run-id (list run-id test-id state status msg)))

(define (rmt:test-toplevel-num-items run-id test-name)
  (rmt:send-receive 'test-toplevel-num-items run-id (list run-id test-name)))

;; (define (rmt:get-previous-test-run-record run-id test-name item-path)
;;   (rmt:send-receive 'get-previous-test-run-record run-id (list run-id test-name item-path)))

  (rmt:send-receive 'get-count-tests-running-for-testname run-id (list run-id testname)))

(define (rmt:get-count-tests-running-in-jobgroup run-id jobgroup)
  (rmt:send-receive 'get-count-tests-running-in-jobgroup run-id (list run-id jobgroup)))

;; state and status are extra hints not usually used in the calculation
;;
(define (rmt:roll-up-pass-fail-counts run-id test-name item-path state status comment)
  (rmt:send-receive 'roll-up-pass-fail-counts run-id (list run-id test-name item-path state status comment)))
(define (rmt:set-state-status-and-roll-up-items run-id test-name item-path state status comment)
  (rmt:send-receive 'set-state-status-and-roll-up-items run-id (list run-id test-name item-path state status comment)))

(define (rmt:update-pass-fail-counts run-id test-name)
  (rmt:general-call 'update-pass-fail-counts run-id test-name test-name test-name))

(define (rmt:top-test-set-per-pf-counts run-id test-name)
  (rmt:send-receive 'top-test-set-per-pf-counts run-id (list run-id test-name)))

		     (else
		      (if (runs:lownoise (conc "FAILED prerequitests and we tried" hed) 60)
			  (debug:print 0 *default-log-port* "WARNING: test " hed " has FAILED prerequitests and we've tried at least 10 times to run it. Giving up now."))
		      ;; (debug:print 0 *default-log-port* "         prereqs: " prereqs-not-met)
		      (hash-table-set! test-registry hed 'removed)
		      (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "TEN_STRIKES" #f)
		      ;; I'm unclear on if this roll up is needed - it may be the root cause of the "all set to FAIL" bug.
		      (rmt:roll-up-pass-fail-counts run-id test-name item-path #f "FAIL" #f) ;; treat as FAIL
		      (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "FAIL" #f) ;; treat as FAIL
		      (list (if (null? tal)(car newtal)(car tal))
			    tal
			    reg
			    reruns)))))
	      ;; can't drop this - maybe running? Just keep trying
	      (let ((runable-tests (runs:runable-tests prereqs-not-met)))
		(if (null? runable-tests)

	       (begin
		 (case action
		   ((remove-runs)
		    ;; (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))
		    ;; seek and kill in flight -runtests with % as testpatt here
		    ;; (if (equal? testpatt "%")
		    (tasks:kill-runner target run-name testpatt)
		    
		    ;; (debug:print 0 *default-log-port* "not attempting to kill any run launcher processes as testpatt is " testpatt))
		    (debug:print 1 *default-log-port* "Removing tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((set-state-status)
		    (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))
		    (debug:print 1 *default-log-port* "Modifying state and staus for tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((print-run)
		    (debug:print 1 *default-log-port* "Printing info for run " runkey ", run=" run ", tests=" tests ", header=" header)

      (exit)
      ))
  
  (case transport-type
    ((http)(http-transport:launch run-id))
    ;;((nmsg)(nmsg-transport:launch run-id))
    ((rpc)  (rpc-transport:launch run-id))
    (else (debug:print-error 0 *default-log-port* "unknown server type " transport-type))))
    (else (debug:print-error 0 *default-log-port* "unknown server type " transport-type)))

  ;; is this a good place to print server exit stats?
  (debug:print 0 "SERVER: max parallel api requests: " *max-api-process-requests*)
  
  )
;;       (else   (debug:print-error 0 *default-log-port* "No known transport set, transport=" transport ", using rpc")
;; 	      (rpc-transport:launch run-id)))))

;;======================================================================
;; S E R V E R   U T I L I T I E S 
;;======================================================================

        FROM servers WHERE run_id=? AND state NOT LIKE 'defunct%' ORDER BY start_time DESC;"
     run-id)
    (reverse res)))

;; no elegance here ...
;;
(define (tasks:kill-server hostname pid #!key (kill-switch ""))
  (server:remove-dotserver-file *toppath* ".*")
  (debug:print-info 0 *default-log-port* "Attempting to kill server process " pid " on host " hostname)
  (setenv "TARGETHOST" hostname)
  (setenv "TARGETHOST_LOGF" "server-kills.log")
  (system (conc "nbfake kill "kill-switch" "pid))

  (unsetenv "TARGETHOST_LOGF")
  (unsetenv "TARGETHOST"))
 
;; look up a server by run-id and send it a kill, also delete the record for that server
;;
(define (tasks:kill-server-run-id run-id #!key (tag "default"))
  (let* ((tdbdat  (tasks:open-db))
	 (sdat    (tasks:get-server (db:delay-if-busy tdbdat) run-id)))
    (if sdat
	(let ((hostname (vector-ref sdat 6))
	      (pid      (vector-ref sdat 5))
	      (server-id (vector-ref sdat 0)))
	  (tasks:server-set-state! (db:delay-if-busy tdbdat) server-id "killed")
	  (debug:print-info 0 *default-log-port* "Killing server " server-id " for run-id " run-id " on host " hostname " with pid " pid)
          (server:remove-dotserver-file *toppath* ".*")
	  (tasks:kill-server hostname pid)
	  (tasks:server-delete-record (db:delay-if-busy tdbdat) server-id tag) )
	(debug:print-info 0 *default-log-port* "No server found for run-id " run-id ", nothing to kill"))
    ;; (sqlite3:finalize! tdb)
    ))
    
;;======================================================================

				    (if (null? tal)
					#t
					(loop (car tal)(cdr tal)))
				    #f))))))
	    (pop-directory)
	    result)))))

(define (tests:test-force-state-status! run-id test-id state status)
  (rmt:test-set-status-state run-id test-id status state #f)
  ;; (rmt:roll-up-pass-fail-counts run-id test-name item
  (mt:process-triggers run-id test-id state status))

;; Do not rpc this one, do the underlying calls!!!
(define (tests:test-set-status! run-id test-id state status comment dat #!key (work-area #f))
  (let* ((real-status status)
	 (otherdat    (if dat dat (make-hash-table)))
	 (testdat     (rmt:get-test-info-by-id run-id test-id))
	 (test-name   (db:test-get-testname  testdat))
	 (item-path   (db:test-get-item-path testdat))

	(set! real-status "WAIVED"))

    (debug:print 4 *default-log-port* "real-status " real-status ", waived " waived ", status " status)

    ;; update the primary record IF state AND status are defined
    (if (and state status)
	(begin
	  (rmt:test-set-status-state run-id test-id real-status state (if waived waived comment))
	  ;; (mt:process-triggers run-id test-id state real-status) ;; triggers are called in test-set-status-state
	  (rmt:test-set-state-status run-id test-id state real-status (if waived waived comment))
	  ;; (mt:process-triggers run-id test-id state real-status) ;; triggers are called in test-set-state-status
	  ))
    
    ;; if status is "AUTO" then call rollup (note, this one modifies data in test
    ;; run area, it does remote calls under the hood.
    ;; (if (and test-id state status (equal? status "AUTO")) 
    ;; 	(rmt:test-data-rollup run-id test-id status))

			   type     )))
	    ;; This was run remote, don't think that makes sense. Perhaps not, but that is the easiest path for the moment.
	    (rmt:csv->test-data run-id test-id
				dat))))
      
    ;; need to update the top test record if PASS or FAIL and this is a subtest
    (if (not (equal? item-path ""))
	(rmt:roll-up-pass-fail-counts run-id test-name item-path state status #f))
	(rmt:set-state-status-and-roll-up-items run-id test-name item-path state status #f))

    (if (or (and (string? comment)
		 (string-match (regexp "\\S+") comment))
	    waived)
	(let ((cmt  (if waived waived comment)))
	  (rmt:general-call 'set-test-comment run-id cmt test-id)))))

	    force)
	(let ((my-start-time (current-seconds))
	      (lockf         (conc outputfilename ".lock")))
	  (let loop ((have-lock  (common:simple-file-lock lockf)))
	    (if have-lock
		(let ((script (configf:lookup *configdat* "testrollup" test-name)))
		  (print "Obtained lock for " outputfilename)
		  (rmt:roll-up-pass-fail-counts run-id test-name "" #f #f #f)
		  (rmt:set-state-status-and-roll-up-items run-id test-name "" #f #f #f)
		  ;; (rmt:test-set-status-state run-id test-name #f #f #f) ;; (rmt:top-test-set-per-pf-counts run-id test-name)
		  (if script
		      (system (conc script " > " outputfilename " & "))
		      (tests:generate-html-summary-for-iterated-test run-id test-id test-name outputfilename))
		  (common:simple-file-release-lock lockf)
		  (change-directory orig-dir)
		  ;; NB// tests:test-set-toplog! is remote internal...
		  (tests:test-set-toplog! run-id test-name outputfilename))

BINDIR    = $(PWD)/../../../bin
PATH     := $(BINDIR):$(PATH)
MEGATEST  = $(BINDIR)/megatest
DASHBOARD = $(BINDIR)/dashboard
NEWDASHBOARD = $(BINDIR)/newdashboard
RUNNAME   = a
NUMTESTS  = 20

all :
	$(MEGATEST) -remove-runs -target a/b :runname c -testpatt %/%
	$(MEGATEST) -runtests % -target a/b :runname c
	$(MEGATEST) -remove-runs -target a/b -runname c -testpatt %/%
	$(MEGATEST) -run -testpatt % -target a/b -runname c

bigbig :
	for tn in a b c d;do \
	   ($(MEGATEST) -runtests % -target a/b :runname $tn & ) ; \
	   ($(MEGATEST) -run -testpatt % -target a/b -runname $tn & ) ; \
	done

waitonpatt :
	megatest -remove-runs -runname waitonpatt -target a/b -testpatt %
	NUMTESTS=15 megatest -run -target a/b -runname waitonpatt -testpatt bigrun3/%8

waitonall :
	megatest -remove-runs -runname waitonall -target a/b -testpatt %
	NUMTESTS=20 megatest -run -target a/b -runname waitonall -testpatt alltop

bigrun :
	NUMTESTS=$(NUMTESTS) $(MEGATEST) -runtests bigrun -target a/bigrun :runname a$(shell date +%V)
	NUMTESTS=$(NUMTESTS) $(MEGATEST) -run -testpatt bigrun -target a/bigrun -runname a$(shell date +%V)

bigrun2 :
	NUMTESTS=$(NUMTESTS) $(MEGATEST) -runtests bigrun2 -target a/bigrun2 :runname a$(shell date +%V)
	NUMTESTS=$(NUMTESTS) $(MEGATEST) -run -testpatt bigrun2 -target a/bigrun2 -runname a$(shell date +%V)

bigrun3 :
	NUMTESTS=$(NUMTESTS) $(MEGATEST) -runtests bigrun3 -target a/bigrun3 :runname $(RUNNAME)
	NUMTESTS=$(NUMTESTS) $(MEGATEST) -run -testpatt bigrun3 -target a/bigrun3 -runname $(RUNNAME)

dashboard : 
	mkdir -p ../simpleruns
	$(DASHBOARD) -rows 20 &

newdashboard :
	$(NEWDASHBOARD) &

compile :
	(cd ../../..;make -j && make install)

clean :
	rm -rf ../simple*/*/* megatest.db db/* ../simple*/.db/* logs/* monitor.db
	rm -rf ../simple*/*/* megatest.db db/* ../simple*/.db/* logs/* monitor.db /tmp/$(USER)/megatest_localdb/testqa .server

[host-types]
general #MTLOWESTLOAD xena zeus

[jobtools]
launcher nbfake
maxload 1.5
flexi-launcher yes
# useshell no

[setup]
launch-delay 1
launchwait no

[launchers]
% general

[setup]
testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log
# launchwait no
launch-delay 0

# All these are overridden in ../fdk.config
# [jobtools]
# launcher nbfake
# launcher bsub -q priority -o $MT_TEST_RUN_DIR/openlava.log 

[include ../fdk.config]

[include local.config]

__EOF

if [[ -z "$MY_NBFAKE_HOST" ]]; then
  # Run locally
  sh -c "cd $CURRWD;export DISPLAY=$DISPLAY; export PATH=$PATH; nohup $* >> $MY_NBFAKE_LOG 2>&1 &"
else
  # run remotely
  ssh -n -f $MY_NBFAKE_HOST "sh -c \"cd $CURRWD;export DISPLAY=$DISPLAY; export PATH=$PATH; nohup $* >> $MY_NBFAKE_LOG 2>&1 &\""
  ssh -X -n -f $MY_NBFAKE_HOST "sh -c \"cd $CURRWD;export DISPLAY=$DISPLAY; export PATH=$PATH; nohup $* >> $MY_NBFAKE_LOG 2>&1 &\""
fi

#!/mfs/pkgs/chicken/4.8.0.5/bin/csi -nbq

;; Coming soon (right?) Usage: plot-code file1.scm,file2.scm "fun1,fun2,x*" *.scm > plot.dot
;; Usage: plot-code file1.scm,file2.scm *.scm > plot.dot
;;        dot -Tpdf plot.dot > plot.pdf
;; first param is comma separated list of files to include in the map, use - to do all
;; second param is list of regexs for functions to include in the map
;; third param is list of files to scan

(use regex srfi-69 srfi-13)

(define targs #f) 
(define files (cddddr (argv)))
(define files (cdr (cddddr (argv))))

(let ((targdat (cadddr (argv))))
  (if (equal? targdat "-")
      (set! targs files)
      (set! targs (string-split targdat ","))))

(define function-patt (car (cdr (cdddr (argv)))))
(define function-rx   (regexp function-patt))
(define filedat-defns (make-hash-table))
(define filedat-usages (make-hash-table))

(define defn-rx (regexp "^\\s*\\(define\\s+\\(([^\\s\\)]+).*"))
(define all-regexs (make-hash-table))

(define all-fns '())

;; for the se

(define (print-err . data)
  (with-output-to-port (current-error-port)
    (lambda ()
      (apply print data))))

(print-err "Making graph for files: " (string-intersperse targs ", "))
(print-err "Looking at files: " (string-intersperse files ", "))
(print-err "Function regex: " function-patt)

;; Gather the functions
;;
(for-each 
 (lambda (fname)
   (print-err "Processing file " fname)
   (with-input-from-file fname
     (lambda ()
       (let loop ((inl (read-line)))
	 (if (not (eof-object? inl))
	     (let ((match (string-match defn-rx inl)))
	       (if match 
		   (let ((fnname (cadr match)))
		     ;; (print "   " fnname)
		     (if (string-match function-rx fnname)
			 (begin
		     (set! all-fns (cons fnname all-fns))
		     (hash-table-set! 
		      filedat-defns 
		      fname
		      (cons fnname (hash-table-ref/default filedat-defns fname '())))
		     ))
			   (set! all-fns (cons fnname all-fns)))
			 (hash-table-set! 
			  filedat-defns 
			  fname
			  (cons fnname (hash-table-ref/default filedat-defns fname '())))
			 )))
	       (loop (read-line))))))))
 files)

;; fill up the regex hash
(print-err "Make the huge regex hash")
(for-each
 (lambda (fnname)