Megatest

	  (exit 1))
	(debug:print-info 0 "Using path " archive-dir " for archiving"))

    ;; from the test info bin the path to the test by stem
    ;;
    (for-each
     (lambda (test-dat)
       (let* ((item-path         (db:test-item-path test-dat))
	      (test-name         (db:test-testname  test-dat))
	      (test-id           (db:test-id        test-dat))
	      (run-id            (db:test-run_id    test-dat))
	      (target            (string-intersperse (map cadr (rmt:get-key-val-pairs run-id)) "/"))
	      
	      (toplevel/children (and (db:test-is-toplevel test-dat)
				      (> (rmt:test-toplevel-num-items run-id test-name) 0)))
	      (test-partial-path (conc target "/" run-name "/" (db:test-make-full-name test-name item-path)))
	      ;; note the trailing slash to get the dir inspite of it being a link
	      (test-path         (conc linktree "/" test-partial-path))
	      (mutex-lock! rp-mutex)
	      (test-physical-path (if (file-exists? test-path) 
				      (common:real-path test-path)

	 ;; (mutex-lock! bup-mutex)
	 (run-n-wait bup-exe params: bup-index-params print-cmd: print-prefix)
	 (debug:print-info 0 "Archiving data with bup")
	 (run-n-wait bup-exe params: bup-save-params print-cmd: print-prefix)
	 ;; (mutex-unlock! bup-mutex)
	 (for-each
	  (lambda (test-dat)
	    (let ((test-id           (db:test-id        test-dat))
		  (run-id            (db:test-run_id    test-dat)))
	      (rmt:test-set-archive-block-id run-id test-id archive-id)
	      (if (member archive-command '("save-remove"))
		  (runs:remove-test-directory test-dat 'archive-remove))))
	  (hash-table-ref test-groups disk-group))))
     (hash-table-keys disk-groups))
    #t))

(define (archive:bup-restore archive-command run-id run-name tests rp-mutex bup-mutex)  ;; move the getting of archive space down into the below block so that a single run can 
  ;; allocate as needed should a disk fill up
  ;;
  (let* ((bup-exe      (or (configf:lookup *configdat* "archive" "bup") "bup"))
	 (linktree     (configf:lookup *configdat* "setup" "linktree")))

    ;; from the test info bin the path to the test by stem
    ;;
    (for-each
     (lambda (test-dat)
       ;; When restoring test-dat will initially contain an old and invalid path to the test
       (let* ((best-disk         (get-best-disk *configdat* #f)) ;; BUG: get the testconfig and use it here. Otherwise data pulled out of archive could end up on the wrong kind of disk.
	      (item-path         (db:test-item-path test-dat))
	      (test-name         (db:test-testname  test-dat))
	      (test-id           (db:test-id        test-dat))
	      (run-id            (db:test-run_id    test-dat))
	      (keyvals           (rmt:get-key-val-pairs run-id))
	      (target            (string-intersperse (map cadr keyvals) "/"))
	      
	      (toplevel/children (and (db:test-is-toplevel test-dat)
				      (> (rmt:test-toplevel-num-items run-id test-name) 0)))
	      (test-partial-path (conc target "/" run-name "/" (db:test-make-full-name test-name item-path)))
	      ;; note the trailing slash to get the dir inspite of it being a link
	      (test-path         (conc linktree "/" test-partial-path))
	      ;; if the old path was not deleted then prev-test-physical-path will end up pointing to a real directory
	      (mutex-lock! rp-mutex)
	      (prev-test-physical-path (if (file-exists? test-path)
					   ;; (read-symbolic-link test-path #t)
					   (common:real-path test-path)
					   #f))
	      (mutex-unlock! rp-mutex)
	      (new-test-physical-path  (conc best-disk "/" test-partial-path))
	      (archive-block-id        (db:test-archived test-dat))
	      (archive-block-info      (rmt:test-get-archive-block-info archive-block-id))
	      (archive-path            (if (vector? archive-block-info)
					   (vector-ref archive-block-info 2) ;; look in db.scm for test-get-archive-block-info for the vector record info
					   #f)) ;; no archive found?
	      (archive-internal-path   (conc (common:get-testsuite-name) "-" run-id "/latest/" test-partial-path)))
	 
	 ;; some sanity checks, move an existing path out of the way - iif it is not a toplevel with children

	       ;; 3. Construct the paths etc. for the following command:
	       ;; 
	       ;; bup -d /tmp/matt/adisk1/2015_q1/fullrun_e1a40/ restore -C /tmp/seeme fullrun-30/latest/ubuntu/nfs/none/w02.1.20.54_b/

	       ;; DO BUP RESTORE
	       (let* ((new-test-dat        (rmt:get-test-info-by-id run-id test-id))
		      (new-test-path       (if (vector? new-test-dat )
					       (db:test-rundir new-test-dat)
					       (begin
						 (debug:print 0 "ERROR: unable to get data for run-id=" run-id ", test-id=" test-id)
						 (exit 1))))
		      ;; new-test-path won't work - must use best-disk instead? Nope, new-test-path but tack on /..
		      (bup-restore-params  (list "-d" archive-path "restore" "-C" (conc new-test-path "/..") archive-internal-path)))
		 (debug:print-info 0 "Restoring archived data to " new-test-physical-path " from archive in " archive-path " ... " archive-internal-path)
		 ;; (mutex-lock! bup-mutex)
		 (run-n-wait bup-exe params: bup-restore-params print-cmd: #f)
		 ;; (mutex-unlock! bup-mutex)
		 (mt:test-set-state-status-by-id run-id test-id "COMPLETED" #f #f)))
	     (debug:print 0 "ERROR: No archive path in the record for run-id=" run-id " test-id=" test-id))))
     (filter vector? tests))))
	 

			      "Test comment: "
			      "Test id: "
			      "Test date: "))
		   (list (iup:label "" #:expand "VERTICAL"))))
    (apply iup:vbox  ; #:expand "YES"
	   (list 
	    (store-label "testname"
			 (iup:label (db:test-testname  testdat) #:expand "HORIZONTAL")
			 (lambda (testdat)(db:test-testname testdat)))
	    (store-label "item-path"
			 (iup:label (db:test-item-path testdat) #:expand "HORIZONTAL")
			 (lambda (testdat)(db:test-item-path testdat)))
	    (store-label "teststate" 
			 (iup:label (db:test-state testdat) #:expand "HORIZONTAL")
			 (lambda (testdat)
			   (db:test-state testdat)))
	    (let ((lbl   (iup:label (db:test-status testdat) #:expand "HORIZONTAL")))
	      (hash-table-set! widgets "teststatus"
			       (lambda (testdat)
				 (let ((newstatus (db:test-status testdat))
				       (oldstatus (iup:attribute lbl "TITLE")))
				   (if (not (equal? oldstatus newstatus))
				       (begin
					 (iup:attribute-set! lbl "FGCOLOR" (car (gutils:get-color-for-state-status (db:test-state testdat)
														   (db:test-status testdat))))
					 (iup:attribute-set! lbl "TITLE" (db:test-status testdat)))))))
	      lbl)
	    (store-label "testcomment"
			 (iup:label "TestComment                             "
				    #:expand "HORIZONTAL")
			 (lambda (testdat)
			   (let ((newcomment (db:test-comment testdat)))
			     (if *dashboard-comment-share-slot*
				 (if (not (equal? (iup:attribute *dashboard-comment-share-slot* "VALUE")
						  newcomment))
				     (iup:attribute-set! *dashboard-comment-share-slot*
							 "VALUE"
							 newcomment)))
			     newcomment)))
	    (store-label "testid"
			 (iup:label "TestId                             "
				    #:expand "HORIZONTAL")
			 (lambda (testdat)
			   (db:test-id testdat)))
	    (store-label "testdate" 
			 (iup:label "TestDate                           "
				    #:expand "HORIZONTAL")
			 (lambda (testdat)
			   (seconds->work-week/day-time (db:test-event_time testdat))))
	    )))))

;;======================================================================
;; Test meta panel
;;======================================================================

(define (test-meta-panel-get-description testmeta)

	    )))))


;;======================================================================
;; Run info panel
;;======================================================================
(define (run-info-panel db keydat testdat runname)
  (let* ((run-id     (db:test-run_id testdat))
	 (rundat     (db:get-run-info db run-id))
	 (header     (db:get-header rundat))
	 (event_time (db:get-value-by-header (db:get-rows rundat)
					     (db:get-header rundat)
					     "event_time")))
    (iup:frame 
     #:title "Megatest Run Info" ; #:expand "YES"

			      "Uname -a: "))
		   (iup:label "" #:expand "VERTICAL")))
    (apply iup:vbox ; #:expand "YES"
	   (list
	    ;; NOTE: Yes, the host can change!
	    (store-label "HostName"
			 (iup:label ;; (sdb:qry 'getstr 
			  (db:test-host testdat) ;; )
			  #:expand "HORIZONTAL")
			 (lambda (testdat)(db:test-host testdat)))
	    (store-label "DiskFree"
			 (iup:label (conc (db:test-diskfree testdat)) #:expand "HORIZONTAL")
			 (lambda (testdat)(conc (db:test-diskfree testdat))))
	    (store-label "CPULoad"
			 (iup:label (conc (db:test-cpuload testdat)) #:expand "HORIZONTAL")
			 (lambda (testdat)(conc (db:test-cpuload testdat))))
	    (store-label "RunDuration"
			 (iup:label (conc (seconds->hr-min-sec (db:test-run_duration testdat))) #:expand "HORIZONTAL")
			 (lambda (testdat)(conc (seconds->hr-min-sec (db:test-run_duration testdat)))))
	    (store-label "LogFile"
			 (iup:label (conc (db:test-final_logf testdat)) #:expand "HORIZONTAL")
			 (lambda (testdat)(conc (db:test-final_logf testdat))))
	    (store-label "ProcessId"
			 (iup:label (conc (db:test-process_id testdat)) #:expand "HORIZONTAL")
			 (lambda (testdat)(conc (db:test-process_id testdat))))
	    (store-label "Uname"
			 (iup:label "                                                   " #:expand "HORIZONTAL") ;;  #:wordwrap "YES")
			 (lambda (testdat) ;; (sdb:qry 'getstr 
			   (db:test-uname testdat))) ;; )
	    )))))

;; if there is a submegatest create a button to launch dashboard in that area
;;
(define (submegatest-panel dbstruct keydat testdat runname testconfig)
  (let* ((subarea (configf:lookup testconfig "setup" "submegatest"))
	 (area-exists (and subarea (file-exists? subarea))))

		     (system (conc "cd " subarea ";env -i PATH=$PATH DISPLAY=$DISPLAY HOME=$HOME USER=$USER dashboard &")))))
	(iup:vbox))))

;; use a global for setting the buttons colors
;;                           state status teststeps
(define *state-status* (vector #f #f #f))
(define (update-state-status-buttons testdat)
  (let* ((state  (db:test-state  testdat))
	 (status (db:test-status testdat))
	 (color  (car (gutils:get-color-for-state-status state status))))
    ((vector-ref *state-status* 0) state color)
    ((vector-ref *state-status* 1) status color)))

(define *dashboard-test-db* #t)
(define *dashboard-comment-share-slot* #f)

     (iup:vbox
      (iup:hbox (iup:label "Comment:")
		(let ((txtbox (iup:textbox #:action (lambda (val a b)
						      (rmt:test-set-state-status-by-id run-id test-id #f #f b)
						      ;; IDEA: Just set a variable with the proc to call?
						      (rmt:test-set-state-status-by-id run-id test-id #f #f b)
						      (set! newcomment b))
					   #:value (db:test-comment testdat)
					   #:expand "HORIZONTAL")))
		  (set! wtxtbox txtbox)
		  txtbox))
		  
      (apply iup:hbox
	     (iup:label "STATE:" #:size "30x")
	     (let* ((btns  (map (lambda (state)
				  (let ((btn (iup:button state
							 #:expand "HORIZONTAL" #:size "50x" #:font "Courier New, -10"
							 #:action (lambda (x)
								    (rmt:test-set-state-status-by-id run-id test-id state #f #f)
								    (db:test-state-set! testdat state)))))
				    btn))
				(map cadr *common:std-states*)))) ;; (list "COMPLETED" "NOT_STARTED" "RUNNING" "REMOTEHOSTSTART" "LAUNCHED" "KILLED" "KILLREQ"))))
	       (vector-set! *state-status* 0
			    (lambda (state color)
			      (for-each 
			       (lambda (btn)
				 (let* ((name     (iup:attribute btn "TITLE"))

														  (begin
														    (iup:attribute-set! wtxtbox "VALUE" c)
														    (if (not *dashboard-comment-share-slot*)
															(set! *dashboard-comment-share-slot* wtxtbox)))
														  ))))
									  (begin
									    (rmt:test-set-state-status-by-id run-id test-id #f status #f)
									    (db:test-status-set! testdat status))))))))
				    btn))
				(map cadr *common:std-statuses*)))) ;; (list  "PASS" "WARN" "FAIL" "CHECK" "n/a" "WAIVED" "SKIP"))))
	       (vector-set! *state-status* 1
			    (lambda (status color)
			      (for-each 
			       (lambda (btn)
				 (let* ((name     (iup:attribute btn "TITLE"))

	 (wmesg (iup:label (if wpatt (conc "Comment must match pattern " wpatt) "")))
	 (comnt (iup:textbox #:action (lambda (val a b)
					(if wpatt
					    (if (string-match wregx b)
						(iup:attribute-set! wmesg "TITLE" (conc "Comment matches " wpatt))
						(iup:attribute-set! wmesg "TITLE" (conc "Comment does not match " wpatt))
						)))
			     #:value (if ovrdval ovrdval (db:test-comment testdat))
			     #:expand "HORIZONTAL"))
	 (dlog  #f))
    (set! dlog (iup:dialog ;; #:close_cb (lambda (a)(exit)) ; #:expand "YES"
		#:title "SET WAIVER"
		(iup:vbox ; #:expand "YES"
		 (iup:label (conc "Enter justification for waiving test "
				  (db:test-testname testdat)
				  (if (equal? (db:test-item-path testdat) "") 
				      ""
				      (conc "/" (db:test-item-path testdat)))))
		 wmesg ;; the informational msg on whether it matches
		 comnt
		 (iup:hbox
		  (iup:button "Apply and Close "
			      #:expand "HORIZONTAL"
			      #:action (lambda (obj)
					 (let ((comment (iup:attribute comnt "VALUE"))
					       (test-id (db:test-id testdat)))
					   (if (or (not wpatt)
						   (string-match wregx comment))
					       (begin
						 (rmt:test-set-state-status-by-id run-id test-id #f "WAIVED" comment)
						 (db:test-status-set! testdat "WAIVED")
						 (cmtcmd comment)
						 (iup:destroy! dlog))))))
		  (iup:button "Cancel"
			      #:expand "HORIZONTAL" 
			      #:action (lambda (obj)
					 (iup:destroy! dlog)))))))
    dlog))

	 (db-mod-time   0) ;; (file-modification-time db-path))
	 (last-update   0) ;; (current-seconds))
	 (request-update #t))
    (if (not testdat)
	(begin
	  (debug:print 2 "ERROR: No test data found for test " test-id ", exiting")
	  (exit 1))
	(let* (;; (run-id        (if testdat (db:test-run_id testdat) #f))
	       (test-registry (tests:get-all))
	       (keydat        (if testdat (rmt:get-key-val-pairs run-id) #f))
	       (rundat        (if testdat (rmt:get-run-info run-id) #f))
	       (runname       (if testdat (db:get-value-by-header (db:get-rows rundat)
								  (db:get-header rundat)
								  "runname") #f))
	       ;; (tdb           (tdb:open-test-db-by-test-id-local dbstruct run-id test-id))
	       ;; These next two are intentional bad values to ensure errors if they should not
	       ;; get filled in properly.
	       (logfile       "/this/dir/better/not/exist")
	       (rundir        (if testdat 
				  (db:test-rundir testdat)
				  logfile))
	       ;; (testdat-path  (conc rundir "/testdat.db")) ;; this gets recalculated until found 
	       (teststeps     (if testdat (tests:get-compressed-steps #f run-id test-id) '()))
	       (testfullname  (if testdat (db:test-fullname testdat) "Gathering data ..."))
	       (testname      (if testdat (db:test-testname testdat) "n/a"))
	       ;; (tests:get-testconfig testdat testname 'return-procs))
	       (testmeta      (if testdat 
				  (let ((tm (rmt:testmeta-get-record testname)))
				    (if tm tm (make-db:testmeta)))
				  (make-db:testmeta)))

	       (keystring  (string-intersperse 
			    (map (lambda (keyval)
				   ;; (conc ":" (car keyval) " " (cadr keyval)))
				   (cadr keyval))
				 keydat)
			    "/"))
	       (item-path  (db:test-item-path testdat))
	       ;; this next block was added to fix a bug where variables were
               ;; needed. Revisit this.
	       (runconfig  (let ((runconfigf (conc  *toppath* "/runconfigs.config")))
	 		     (if (file-exists? runconfigf)
	 			 (handle-exceptions
                                   exn
                                   #f  ;; do nothing, just keep on trucking ....
                                   (setup-env-defaults runconfigf run-id (make-hash-table) keydat environ-patt: keystring))
	 			 (make-hash-table))))
	       (testconfig    (begin
				;; (runs:set-megatest-env-vars run-id inrunname: runname testname: test-name itempath: item-path)
				(runs:set-megatest-env-vars run-id inkeyvals: keydat inrunname: runname intarget: keystring testname: testname itempath: item-path) ;; these may be needed by the launching process
				(handle-exceptions
				 exn
				 (tests:get-testconfig (db:test-testname testdat) test-registry #f)
				 (tests:get-testconfig (db:test-testname testdat) test-registry #t))))
	       (viewlog    (lambda (x)
			     (if (file-exists? logfile)
					;(system (conc "firefox " logfile "&"))
				 (dashboard-tests:run-html-viewer logfile)
				 (message-window (conc "File " logfile " not found")))))
	       (view-a-log (lambda (lfile) 
			     (let ((lfilename (conc rundir "/" lfile)))

						     (debug:print-info 0 "test db access issue in examine test for run-id " run-id ", test-id " test-id ": " ((condition-property-accessor 'exn 'message) exn))
						     (rmt:get-test-info-by-id run-id test-id )))))
			       ;; (debug:print-info 0 "need-update= " need-update " curr-mod-time = " curr-mod-time)
			       (cond
				((and need-update newtestdat)
				 (set! testdat newtestdat)
				 (set! teststeps    (tests:get-compressed-steps #f run-id test-id))
				 (set! logfile      (conc (db:test-rundir testdat) "/" (db:test-final_logf testdat)))
				 (set! rundir       ;; (filedb:get-path *fdb* 
				       (db:test-rundir testdat)) ;; )
				 (set! testfullname (db:test-fullname testdat))
				 ;; (debug:print 0 "INFO: teststeps=" (intersperse teststeps "\n    "))
				 
				 ;; I don't see why this was implemented this way. Please comment it ...
				 ;; (if (eq? curr-mod-time db-mod-time) ;; do only once if same
				 ;;     (set! db-mod-time (+ curr-mod-time 1))
				 ;;     (set! db-mod-time curr-mod-time))

				 (if (not (eq? curr-mod-time db-mod-time))
				     (set! db-mod-time curr-mod-time))
				 (set! last-update (current-milliseconds))
				 (set! request-update #f) ;; met the need ...
				 )
				(need-update ;; if this was true and yet there is no data ....
				 (db:test-testname-set! testdat "DEAD OR DELETED TEST")))
			       (if need-update
				   (begin
				     ;; update the gui elements here
				     (for-each 
				      (lambda (key)
					;; (print "Updating " key)
					((hash-table-ref widgets key) testdat))

(define (colors-similar? color1 color2)
  (let* ((c1    (map string->number (string-split color1)))
	 (c2    (map string->number (string-split color2)))
	 (delta (map (lambda (a b)(abs (- a b))) c1 c2)))
    (null? (filter (lambda (x)(> x 3)) delta))))

(define (compare-tests test1 test2)
  (let* ((test-name1  (db:test-testname  test1))
	 (item-path1  (db:test-item-path test1))
	 (eventtime1  (db:test-event_time test1))
	 (test-name2  (db:test-testname  test2))
	 (item-path2  (db:test-item-path test2))
	 (eventtime2  (db:test-event_time test2))
	 (same-name   (equal? test-name1 test-name2))
	 (test1-top   (equal? item-path1 ""))
	 (test2-top   (equal? item-path2 ""))
	 (test1-older (> eventtime1 eventtime2))
	 (same-time   (equal? eventtime1 eventtime2)))			 
    (if same-name
	(if same-time

	(if (< i maxn)
	    (loop (+ i 1)))))))

;; 
(define (get-itemized-tests test-dats)
  (let ((tnames '()))
    (for-each (lambda (tdat)
		(let ((tname (vector-ref tdat 0))  ;; (db:test-testname tdat))
		      (ipath (vector-ref tdat 1))) ;; (db:test-item-path tdat)))
		  (if (not (equal? ipath ""))
		      (if (and (list? tnames)
			       (string? tname)
			       (not (member tname tnames)))
			  (set! tnames (append tnames (list tname)))))))
	      test-dats)
    tnames))

;; Bubble up the top tests to above the items, collect the items underneath
;; all while preserving the sort order from the SQL query as best as possible.
;;
(define (bubble-up test-dats #!key (priority 'itempath))
  (if (null? test-dats)
      test-dats
      (begin
	(let* ((tnames   '())                ;; list of names used to reserve order
	       (tests    (make-hash-table))  ;; hash of lists, used to build as we go
	       (itemized (get-itemized-tests test-dats)))
	  (for-each 
	   (lambda (testdat)
	     (let* ((tname (vector-ref testdat 0))  ;; db:test-testname testdat))
		    (ipath (vector-ref testdat 1))) ;; db:test-item-path testdat)))
	       ;;   (seen  (hash-table-ref/default tests tname #f)))
	       (if (not (member tname tnames))
		   (if (or (and (eq? priority 'itempath)
				(not (equal? ipath "")))
			   (and (eq? priority 'testname)
				(equal? ipath ""))
			   (not (member tname itemized)))

		(if buttondat
		    (let* ((test       (let ((matching (filter 
							(lambda (x)(equal? (test:test-get-fullname x) testname))
							testsdat)))
					 (if (null? matching)
					     (vector -1 -1 "" "" "" 0 "" "" 0 "" "" "" 0 "" "")
					     (car matching))))
			   (testname   (db:test-testname  test))
			   (itempath   (db:test-item-path test))
			   (testfullname (test:test-get-fullname test))
			   (teststatus (db:test-status   test))
			   (teststate  (db:test-state    test))
			   ;;(teststart  (db:test-event_time test))
			   ;;(runtime    (db:test-run_duration test))
			   (buttontxt  (cond
					((member teststate '("COMPLETED" "ARCHIVED")) teststatus)
					((and (equal? teststate "NOT_STARTED")
					      (member teststatus '("ZERO_ITEMS" "BLOCKED" "PREQ_FAIL" "PREQ_DISCARDED" "TIMED_OUT" "KEEP_TRYING" "TEN_STRIKES")))
					 teststatus)
					(else
					 teststate)))

	       (butn       (iup:button "" ;; button-key 
				       #:size "60x15" 
				       #:expand "HORIZONTAL"
				       #:fontsize "10" 
				       #:action (lambda (x)
						  (let* ((toolpath (car (argv)))
							 (buttndat (hash-table-ref *buttondat* button-key))
							 (test-id  (db:test-id (vector-ref buttndat 3)))
							 (run-id   (db:test-run_id (vector-ref buttndat 3)))
							 (cmd  (conc toolpath " -test " run-id "," test-id "&")))
					;(print "Launching " cmd)
						    (system cmd))))))
	  (hash-table-set! *buttondat* button-key (vector 0 "100 100 100" button-key #f #f)) 
	  (vector-set! testvec testnum butn)
	  (loop runnum (+ testnum 1) testvec (cons butn res))))))
    ;; now assemble the hdrlst and bdylst and kick off the dialog

perl -pi -e 's/db:test-set-testname!/db:test-testname-set!/g' *.scm
perl -pi -e 's/db:test-set-status!/db:test-status-set!/g' *.scm
perl -pi -e 's/db:test-set-state!/db:test-state-set!/g' *.scm
perl -pi -e 's/db:test-set-run_duration!/db:test-run_duration-set!/g' *.scm
perl -pi -e 's/db:test-set-final_logf!/db:test-final_logf-set!/g' *.scm
perl -pi -e 's/db:test-set-diskfree!/db:test-diskfree-set!/g' *.scm
perl -pi -e 's/db:test-set-cpuload!/db:test-cpuload-set!/g' *.scm

# fix few special cases
perl -pi -e 's/db:test-get-rundir-from-test-id/dbx:test-get-rundir-from-test-id/g' *scm
perl -pi -e 's/db:test-get-is-toplevel/dbx:test-is-toplevel/g' *.scm

perl -pi -e 's/db:test-get-uname/db:test-uname/g' *.scm
perl -pi -e 's/db:test-get-testname/db:test-testname/g' *.scm
perl -pi -e 's/db:test-get-status/db:test-status/g' *.scm
perl -pi -e 's/db:test-get-state/db:test-state/g' *.scm
perl -pi -e 's/db:test-get-rundir/db:test-rundir/g' *.scm
perl -pi -e 's/db:test-get-run_id/db:test-run_id/g' *.scm
perl -pi -e 's/db:test-get-run_duration/db:test-run_duration/g' *.scm
perl -pi -e 's/db:test-get-process_id/db:test-process_id/g' *.scm
perl -pi -e 's/db:test-get-pass_count/db:test-pass_count/g' *.scm
perl -pi -e 's/db:test-get-item-path/db:test-item-path/g' *.scm
perl -pi -e 's/db:test-get-id/db:test-id/g' *.scm
perl -pi -e 's/db:test-get-host/db:test-host/g' *.scm
perl -pi -e 's/db:test-get-fullname/db:test-fullname/g' *.scm
perl -pi -e 's/db:test-get-first_warn/db:test-first_warn/g' *.scm
perl -pi -e 's/db:test-get-first_err/db:test-first_err/g' *.scm
perl -pi -e 's/db:test-get-final_logf/db:test-final_logf/g' *.scm
perl -pi -e 's/db:test-get-fail_count/db:test-fail_count/g' *.scm
perl -pi -e 's/db:test-get-event_time/db:test-event_time/g' *.scm
perl -pi -e 's/db:test-get-diskfree/db:test-diskfree/g' *.scm
perl -pi -e 's/db:test-get-cpuload/db:test-cpuload/g' *.scm
perl -pi -e 's/db:test-get-comment/db:test-comment/g' *.scm
perl -pi -e 's/db:test-get-archived/db:test-archived/g' *.scm

perl -pi -e 's/dbx:test-get-rundir-from-test-id/db:test-get-rundir-from-test-id/g' *scm
perl -pi -e 's/dbx:test-is-toplevel/db:test-is-toplevel/g' *.scm

;;     'read  read data
;;
(define (db:done-with dbstruct run-id mod-read)
  (if (not (sqlite3:database? dbstruct))
      (begin
	(mutex-lock! *rundb-mutex*)
	(if (eq? mod-read 'mod)
	    (dbr:dbstruct-mtime-set! dbstruct (current-milliseconds))
	    (dbr:dbstruct-rtime-set! dbstruct (current-milliseconds)))
	(dbr:dbstruct-inuse-set! dbstruct #f)
	(mutex-unlock! *rundb-mutex*))))

;; (db:with-db dbstruct run-id sqlite3:exec "select blah from blaz;")
;; r/w is a flag to indicate if the db is modified by this query #t = yes, #f = no
;;
(define (db:with-db dbstruct run-id r/w proc . params)
  (let* ((dbdat (if (vector? dbstruct)

	(begin
	  (debug:print 2 "WARNING: opening db in non-writable dir " fname)
	  (sqlite3:open-database fname))))) ;; )

;; This routine creates the db. It is only called if the db is not already opened
;; 
(define (db:open-rundb dbstruct run-id #!key (attemptnum 0)(do-not-open #f)) ;;  (conc *toppath* "/megatest.db") (car *configinfo*)))
  (let* ((local  (dbr:dbstruct-local dbstruct))
	 (rdb    (if local
		     (dbr:dbstruct-localdb dbstruct run-id)
		     (dbr:dbstruct-inmem dbstruct)))) ;; (dbr:dbstruct-runrec dbstruct run-id 'inmem)))
    (if (or rdb
	    do-not-open)
	rdb
	(begin
	  (mutex-lock! *rundb-mutex*)
	  (let* ((dbpath       (db:dbfile-path run-id)) ;; (conc toppath "/db/" run-id ".db"))
		 (dbexists     (file-exists? dbpath))

				     (set! *megatest-db* db)
				     db)))
		 (write-access (file-write-access? dbpath))
		 ;; (handler      (make-busy-timeout 136000))
		 )
	    (if (and dbexists (not write-access))
		(set! *db-write-access* #f)) ;; only unset so other db's also can use this control
	    (dbr:dbstruct-rundb-set!  dbstruct (cons db dbpath))
	    (dbr:dbstruct-inuse-set!  dbstruct #t)
	    (dbr:dbstruct-olddb-set!  dbstruct olddb)
	    ;; (dbr:dbstruct-run-id-set! dbstruct run-id)
	    (mutex-unlock! *rundb-mutex*)
	    (if local
		(begin
		  (dbr:dbstruct-localdb-set! dbstruct run-id db) ;; (dbr:dbstruct-inmem-set! dbstruct db) ;; direct access ...
		  db)
		(begin
		  (dbr:dbstruct-inmem-set!  dbstruct inmem)
		  ;; dec 14, 2014 - keep deleted records available. hunch is that they are needed for id placeholders
		  ;; (sqlite3:execute db "DELETE FROM tests WHERE state='DELETED';") ;; they just slow us down in this context
		  (db:sync-tables db:sync-tests-only db inmem)
		  (db:delay-if-busy refdb) ;; dbpath: (db:dbdat-get-path refdb)) ;; What does delaying here achieve? 
		  (dbr:dbstruct-refdb-set!  dbstruct refdb)
		  (db:sync-tables db:sync-tests-only inmem refdb) ;; use inmem as the reference, don't read again from db
		  ;; sync once more to deal with delays?
		  ;; (db:sync-tables db:sync-tests-only db inmem)
		  ;; (db:sync-tables db:sync-tests-only inmem refdb)
		  inmem)))))))

;; This routine creates the db. It is only called if the db is not already ls opened
;;
(define (db:open-main dbstruct) ;;  (conc *toppath* "/megatest.db") (car *configinfo*)))
  (let ((mdb (dbr:dbstruct-main dbstruct)))
    (if mdb
	mdb
	(begin
	  (mutex-lock! *rundb-mutex*)
	  (let* ((dbpath       (db:dbfile-path 0))
		 (dbexists     (file-exists? dbpath))
		 (db           (db:lock-create-open dbpath db:initialize-main-db))
		 (olddb        (db:open-megatest-db))
		 (write-access (file-write-access? dbpath))
		 (dbdat        (cons db dbpath)))
	    (if (and dbexists (not write-access))
		(set! *db-write-access* #f))
	    (dbr:dbstruct-main-set!   dbstruct dbdat)
	    (dbr:dbstruct-olddb-set!  dbstruct olddb) ;; olddb is already a (cons db path)
	    (mutex-unlock! *rundb-mutex*)
	    (if (and (not dbexists)
		     *db-write-access*) ;; did not have a prior db and do have write access
		(db:multi-db-sync #f 'old2new))  ;; migrate data from megatest.db automatically
	    dbdat)))))

;; Make the dbstruct, setup up auxillary db's and call for main db at least once

    (if (and dbexists (not write-access))
	(set! *db-write-access* #f))
    (cons db dbpath)))

;; sync run to disk if touched
;;
(define (db:sync-touched dbstruct run-id #!key (force-sync #f))
  (let ((mtime  (dbr:dbstruct-mtime dbstruct))
	(stime  (dbr:dbstruct-stime dbstruct))
	(rundb  (dbr:dbstruct-rundb dbstruct))
	(inmem  (dbr:dbstruct-inmem dbstruct))
	(maindb (dbr:dbstruct-main  dbstruct))
	(refdb  (dbr:dbstruct-refdb dbstruct))
	(olddb  (dbr:dbstruct-olddb dbstruct))
	;; (runid  (dbr:dbstruct-run-id dbstruct))
	)
    (debug:print-info 4 "Syncing for run-id: " run-id)
    ;; (mutex-lock! *http-mutex*)
    (if (eq? run-id 0)
	;; runid equal to 0 is main.db
	(if maindb
	    (if (or (not (number? mtime))
		    (not (number? stime))
		    (> mtime stime)
		    force-sync)
		(begin
		  (db:delay-if-busy maindb)
		  (db:delay-if-busy olddb)
		  (let ((num-synced (db:sync-tables (db:sync-main-list maindb) maindb olddb)))
		    (dbr:dbstruct-stime-set! dbstruct (current-milliseconds))
		    num-synced)
		  0))
	    (begin
	      ;; this can occur when using local access (i.e. not in a server)
	      ;; need a flag to turn it off.
	      ;;
	      (debug:print 3 "WARNING: call to sync main.db to megatest.db but main not initialized")
	      0))
	;; any other runid is a run
	(if (or (not (number? mtime))
		(not (number? stime))
		(> mtime stime)
		force-sync)
	    (begin
	      (db:delay-if-busy rundb)
	      (db:delay-if-busy olddb)
	      (dbr:dbstruct-stime-set! dbstruct (current-milliseconds))
	      (let ((num-synced (db:sync-tables db:sync-tests-only inmem refdb rundb olddb)))
		;; (mutex-unlock! *http-mutex*)
		num-synced)
	      (begin
		;; (mutex-unlock! *http-mutex*)
		0))))))

(define (db:close-main dbstruct)
  (let ((maindb (dbr:dbstruct-main dbstruct)))
    (if maindb
	(begin
	  (sqlite3:finalize! (db:dbdat-get-db maindb))
	  (dbr:dbstruct-main-set! dbstruct #f)))))

(define (db:close-run-db dbstruct run-id)
  (let ((rdb (db:open-rundb dbstruct run-id do-not-open: #t)))
    (if (and rdb
	     (sqlite3:database? rdb))
	(begin
	  (sqlite3:finalize! rdb)
	  (dbr:dbstruct-localdb-set! dbstruct run-id #f)
	  (dbr:dbstruct-inmem-set! dbstruct #f)))))

;; close all opened run-id dbs
(define (db:close-all dbstruct)
  ;; finalize main.db
  (db:sync-touched dbstruct 0 force-sync: #t)
  ;;(common:db-block-further-queries)
  ;; (mutex-lock! *db-sync-mutex*) ;; with this perhaps it isn't necessary to use the block-further-queries mechanism?

  (db:close-main dbstruct)
  
  (let ((locdbs (dbr:dbstruct-locdbs dbstruct)))
    (if (hash-table? locdbs)
	(for-each (lambda (run-id)
		    (db:close-run-db dbstruct run-id))
		  (hash-table-keys locdbs))))

  ;; (let* ((local (dbr:dbstruct-local dbstruct))
  ;;        (rundb (db:dbdat-get-db (dbr:dbstruct-rundb dbstruct))))
  ;;   (if local
  ;;       (for-each
  ;;        (lambda (dbdat)
  ;;          (let ((db (db:dbdat-get-db dbdat)))
  ;;            (if (sqlite3:database? db)
  ;;       	 (begin
  ;;       	   (sqlite3:interrupt! db)
  ;;       	   (sqlite3:finalize! db #t)))))
  ;;        ;; TODO: Come back to this and rework to delete from hashtable when finalized
  ;;        (hash-table-values (dbr:dbstruct-locdbs dbstruct))))
  ;;   (thread-sleep! 3)
  ;;   (if (and rundb
  ;;            (sqlite3:database? rundb))
  ;;       (handle-exceptions
  ;;        exn
  ;;        (begin 
  ;;          (debug:print 0 "WARNING: database files may not have been closed correctly. Consider running -cleanup-db")

	  (for-each 
	   (lambda (run-id)
	     (db:delay-if-busy mtdb)
	     (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id))
		   (dbstruct (if toppath (make-dbr:dbstruct path: toppath local: #t) #f)))
	       (debug:print 0 "INFO: Propagating " (length testrecs) " records for run-id=" run-id " to run specific db")
	       (db:replace-test-records dbstruct run-id testrecs)
	       (sqlite3:finalize! (db:dbdat-get-db (dbr:dbstruct-rundb dbstruct)))))
	   run-ids)))

    ;; now ensure all newdb data are synced to megatest.db
    ;; do not use the run-ids list passed in to the function
    ;;
    (if (member 'new2old options)
	(let* ((maindb      (make-dbr:dbstruct path: toppath local: #t))

			   (string->number deadtime-str)
			   7200))) ;; two hours
    (if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
    
    ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
    ;;
    ;; HOWEVER: this code in run:test seems to work fine
    ;;              (> (- (current-seconds)(+ (db:test-event_time testdat)
    ;;                     (db:test-run_duration testdat)))
    ;;                    600) 
    (db:delay-if-busy dbdat)
    (sqlite3:for-each-row 
     (lambda (test-id run-dir uname testname item-path)
       (if (and (equal? uname "n/a")
		(equal? item-path "")) ;; this is a toplevel test
	   ;; what to do with toplevel? call rollup?

			   (string->number deadtime-str)
			   7200))) ;; two hours
    (if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
    
    ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
    ;;
    ;; HOWEVER: this code in run:test seems to work fine
    ;;              (> (- (current-seconds)(+ (db:test-event_time testdat)
    ;;                     (db:test-run_duration testdat)))
    ;;                    600) 
    (db:delay-if-busy dbdat)
    (sqlite3:for-each-row 
     (lambda (test-id run-dir uname testname item-path)
       (if (and (equal? uname "n/a")
		(equal? item-path "")) ;; this is a toplevel test
	   ;; what to do with toplevel? call rollup?

			 (tal (cdr prev-run-ids)))
		(let ((results (db:get-tests-for-run dbstruct hed (conc test-name "/" item-path) '() '() #f #f #f #f #f #f)))
		  (debug:print 4 "Got tests for run-id " run-id ", test-name " test-name 
			       ", item-path " item-path " results: " (intersperse results "\n"))
		  ;; Keep only the youngest of any test/item combination
		  (for-each 
		   (lambda (testdat)
		     (let* ((full-testname (conc (db:test-testname testdat) "/" (db:test-item-path testdat)))
			    (stored-test   (hash-table-ref/default tests-hash full-testname #f)))
		       (if (or (not stored-test)
			       (and stored-test
				    (> (db:test-event_time testdat)(db:test-event_time stored-test))))
			   ;; this test is younger, store it in the hash
			   (hash-table-set! tests-hash full-testname testdat))))
		   results)
		  (if (null? tal)
		      (map cdr (hash-table->alist tests-hash)) ;; return a list of the most recent tests
		      (loop (car tal)(cdr tal))))))))))

	   ;; next should be using mt:get-tests-for-run?
	   (let ((tests             (db:get-tests-for-run-state-status dbstruct run-id waitontest-name))
		 (ever-seen         #f)
		 (parent-waiton-met #f)
		 (item-waiton-met   #f))
	     (for-each 
	      (lambda (test)
		;; (if (equal? waitontest-name (db:test-testname test)) ;; by defintion this had better be true ...
		(let* ((state             (db:test-state test))
		       (status            (db:test-status test))
		       (item-path         (db:test-item-path test))
		       (is-completed      (equal? state "COMPLETED"))
		       (is-running        (equal? state "RUNNING"))
		       (is-killed         (equal? state "KILLED"))
		       (is-ok             (member status '("PASS" "WARN" "CHECK" "WAIVED" "SKIP")))
		       ;;                                       testname-b    path-a    path-b
		       (same-itempath     (db:compare-itempaths ref-test-name item-path ref-item-path itemmaps))) ;; (equal? ref-item-path item-path)))
		  (set! ever-seen #t)

;;            |-1.db
;;            |-<N>.db
;;
;;
;; Accessors for a dbstruct
;;

(define-inline (dbr:dbstruct-main    vec)    (vector-ref  vec 0)) ;; ( db path )
(define-inline (dbr:dbstruct-strdb   vec)    (vector-ref  vec 1)) ;; ( db path )
(define-inline (dbr:dbstruct-path    vec)    (vector-ref  vec 2)) 
(define-inline (dbr:dbstruct-local   vec)    (vector-ref  vec 3))
(define-inline (dbr:dbstruct-rundb   vec)    (vector-ref  vec 4)) ;; ( db path )
(define-inline (dbr:dbstruct-inmem   vec)    (vector-ref  vec 5)) ;; ( db #f )
(define-inline (dbr:dbstruct-mtime   vec)    (vector-ref  vec 6))
(define-inline (dbr:dbstruct-rtime   vec)    (vector-ref  vec 7))
(define-inline (dbr:dbstruct-stime   vec)    (vector-ref  vec 8))
(define-inline (dbr:dbstruct-inuse   vec)    (vector-ref  vec 9))
(define-inline (dbr:dbstruct-refdb   vec)    (vector-ref  vec 10)) ;; ( db path )
(define-inline (dbr:dbstruct-locdbs  vec)    (vector-ref  vec 11))
(define-inline (dbr:dbstruct-olddb   vec)    (vector-ref  vec 12)) ;; ( db path )
;; (define-inline (dbr:dbstruct-main-path vec)  (vector-ref  vec 13))
;; (define-inline (dbr:dbstruct-rundb-path vec) (vector-ref  vec 14))
;; (define-inline (dbr:dbstruct-run-id  vec)    (vector-ref  vec 13))

(define-inline (dbr:dbstruct-main-set!   vec val)(vector-set! vec 0 val))
(define-inline (dbr:dbstruct-strdb-set!  vec val)(vector-set! vec 1 val))
(define-inline (dbr:dbstruct-path-set!   vec val)(vector-set! vec 2 val))
(define-inline (dbr:dbstruct-local-set!  vec val)(vector-set! vec 3 val))
(define-inline (dbr:dbstruct-rundb-set!  vec val)(vector-set! vec 4 val))
(define-inline (dbr:dbstruct-inmem-set!  vec val)(vector-set! vec 5 val))
(define-inline (dbr:dbstruct-mtime-set!  vec val)(vector-set! vec 6 val))
(define-inline (dbr:dbstruct-rtime-set!  vec val)(vector-set! vec 7 val))
(define-inline (dbr:dbstruct-stime-set!  vec val)(vector-set! vec 8 val))
(define-inline (dbr:dbstruct-inuse-set!  vec val)(vector-set! vec 9 val))
(define-inline (dbr:dbstruct-refdb-set!  vec val)(vector-set! vec 10 val))
(define-inline (dbr:dbstruct-locdbs-set! vec val)(vector-set! vec 11 val))
(define-inline (dbr:dbstruct-olddb-set!  vec val)(vector-set! vec 12 val))
(define-inline (dbr:dbstruct-main-path-set! vec val)(vector-set! vec 13 val))
(define-inline (dbr:dbstruct-set-rupath-set! vec val)(vector-set! vec 14 val))

; (define-inline (dbr:dbstruct-run-id-set! vec val)(vector-set! vec 13 val))

;; constructor for dbstruct
;;
(define (make-dbr:dbstruct #!key (path #f)(local #f))
  (let ((v (make-vector 15 #f)))
    (dbr:dbstruct-path-set! v path)
    (dbr:dbstruct-local-set! v local)
    (dbr:dbstruct-locdbs-set! v (make-hash-table))
    v))

(define (dbr:dbstruct-localdb v run-id)
  (hash-table-ref/default (dbr:dbstruct-locdbs v) run-id #f))

(define (dbr:dbstruct-localdb-set! v run-id db)
  (hash-table-set! (dbr:dbstruct-locdbs v) run-id db))


(define (make-db:test)(make-vector 20))
(define-inline (db:test-id           vec) (vector-ref vec 0))
(define-inline (db:test-run_id       vec) (vector-ref vec 1))
(define-inline (db:test-testname     vec) (vector-ref vec 2))
(define-inline (db:test-state        vec) (vector-ref vec 3))
(define-inline (db:test-status       vec) (vector-ref vec 4))
(define-inline (db:test-event_time   vec) (vector-ref vec 5))
(define-inline (db:test-host         vec) (vector-ref vec 6))
(define-inline (db:test-cpuload      vec) (vector-ref vec 7))
(define-inline (db:test-diskfree     vec) (vector-ref vec 8))
(define-inline (db:test-uname        vec) (vector-ref vec 9))
;; (define-inline (db:test-rundir       vec) (sdb:qry 'getstr (vector-ref vec 10)))
(define-inline (db:test-rundir       vec) (vector-ref vec 10))
(define-inline (db:test-item-path    vec) (vector-ref vec 11))
(define-inline (db:test-run_duration vec) (vector-ref vec 12))
(define-inline (db:test-final_logf   vec) (vector-ref vec 13))
(define-inline (db:test-comment      vec) (vector-ref vec 14))
(define-inline (db:test-process_id   vec) (vector-ref vec 16))
(define-inline (db:test-archived     vec) (vector-ref vec 17))

;; (define-inline (db:test-pass_count   vec) (vector-ref vec 15))
;; (define-inline (db:test-fail_count   vec) (vector-ref vec 16))
(define-inline (db:test-fullname     vec)
  (conc (db:test-testname vec) "/" (db:test-item-path vec)))

;; replace runs:make-full-test-name with this routine
(define (db:test-make-full-name testname itempath)
  (if (equal? itempath "") testname (conc testname "/" itempath)))

(define-inline (db:test-first_err    vec) (printable (vector-ref vec 15)))
(define-inline (db:test-first_warn   vec) (printable (vector-ref vec 16)))

(define-inline (db:test-cpuload-set!  vec val)(vector-set! vec 7 val))
(define-inline (db:test-diskfree-set! vec val)(vector-set! vec 8 val))
(define-inline (db:test-testname-set! vec val)(vector-set! vec 2 val))
(define-inline (db:test-state-set!    vec val)(vector-set! vec 3 val))
(define-inline (db:test-status-set!   vec val)(vector-set! vec 4 val))
(define-inline (db:test-run_duration-set! vec val)(vector-set! vec 12 val))
(define-inline (db:test-final_logf-set! vec val)(vector-set! vec 13 val))

;; Test record utility functions

;; Is a test a toplevel?
;;
(define (db:test-is-toplevel vec)
  (and (equal? (db:test-item-path vec) "")      ;; test is not an item
       (equal? (db:test-uname vec)     "n/a"))) ;; test has never been run

;; make-vector-record "" db mintest id run_id testname state status event_time item_path
;;
(define (make-db:mintest)(make-vector 7))
(define-inline (db:mintest-get-id           vec)    (vector-ref  vec 0))
(define-inline (db:mintest-get-run_id       vec)    (vector-ref  vec 1))
(define-inline (db:mintest-get-testname     vec)    (vector-ref  vec 2))

perl -pi -e 's/dbr:dbstruct-set-strdb/dbr:dbstruct-strdb-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-stime/dbr:dbstruct-stime-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-rundb-path/dbr:dbstruct-set-rupath-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-rundb/dbr:dbstruct-rundb-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-run-id/dbr:dbstruct-run-id-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-rtime/dbr:dbstruct-rtime-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-refdb/dbr:dbstruct-refdb-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-path/dbr:dbstruct-path-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-olddb/dbr:dbstruct-olddb-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-mtime/dbr:dbstruct-mtime-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-main-path/dbr:dbstruct-main-path-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-main/dbr:dbstruct-main-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-locdbs/dbr:dbstruct-locdbs-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-localdb/dbr:dbstruct-localdb-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-local/dbr:dbstruct-local-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-inuse/dbr:dbstruct-inuse-set/g' *.scm
perl -pi -e 's/dbr:dbstruct-set-inmem/dbr:dbstruct-inmem-set/g' *.scm

perl -pi -e 's/dbr:dbstruct-get-strdb/dbr:dbstruct-strdb/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-stime/dbr:dbstruct-stime/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-runrec/dbr:dbstruct-runrec/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-rundb-path/dbr:dbstruct-rundb-path/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-rundb/dbr:dbstruct-rundb/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-run-id/dbr:dbstruct-run-id/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-rtime/dbr:dbstruct-rtime/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-refdb/dbr:dbstruct-refdb/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-path/dbr:dbstruct-path/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-olddb/dbr:dbstruct-olddb/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-mtime/dbr:dbstruct-mtime/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-main-path/dbr:dbstruct-main-path/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-main/dbr:dbstruct-main/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-locdbs/dbr:dbstruct-locdbs/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-localdb/dbr:dbstruct-localdb/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-local/dbr:dbstruct-local/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-inuse/dbr:dbstruct-inuse/g' *.scm
perl -pi -e 's/dbr:dbstruct-get-inmem/dbr:dbstruct-inmem/g' *.scm

	 (runid-to-col    (hash-table-ref *cachedata* "runid-to-col"))
	 (testname-to-row (hash-table-ref *cachedata* "testname-to-row")) 
	 (colnum       1)
	 (rownum       0)) ;; rownum = 0 is the header
;; (debug:print 0 "test-ids " test-ids ", tests-detail-changes " tests-detail-changes)
    
	 ;; tests related stuff
	 ;; (all-testnames (delete-duplicates (map db:test-testname test-changes))))

    ;; Given a run-id and testname/item_path calculate a cell R:C

    ;; NOTE: Also build the test tree browser and look up table
    ;;
    ;; Each run is unique on its keys and runname or run-id, store in hash on colnum
    (for-each (lambda (run-id)

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")

(define (ezsteps:run-from testdat start-step-name run-one)
  (let* ((test-run-dir  ;; (filedb:get-path *fdb* 
	  (db:test-rundir testdat)) ;; )
	 (testconfig    (read-config (conc test-run-dir "/testconfig") #f #t environ-patt: "pre-launch-env-vars"))
	 (ezstepslst    (hash-table-ref/default testconfig "ezsteps" '()))
	 (run-mutex     (make-mutex))
	 (rollup-status 0)
	 (exit-info     (vector #t #t #t))
	 (test-id       (db:test-id testdat))
	 (run-id        (db:test-run_id testdat))
	 (test-name     (db:test-testname testdat))
	 (kill-job      #f)) ;; for future use (on re-factoring with launch.scm code
    (let loop ((count 5))
      (if (file-exists? test-run-dir)
	  (push-directory test-run-dir)
	  (if (> count 0)
	      (begin
		(debug:print 0 "WARNING: ezsteps attempting to run but test run directory " test-run-dir " is not there. Waiting and trying again " count " more times")

			   (not (null? tal)))
		      (if (not run-one) ;; if we got here we completed the step, if run-one is true, stop
			  (loop (car tal) (cdr tal) stepname runflag))))
		(debug:print 4 "WARNING: a prior step failed, stopping at " ezstep)))
	  
	  ;; Once done with step/steps update the test record
	  ;;
	  (let* ((item-path (db:test-item-path testdat)) ;; (item-list->path itemdat))
		 (testinfo  (rmt:get-testinfo-by-id run-id test-id))) ;; refresh the testdat, call it iteminfo in case need prev/curr
	    ;; Am I completed?
	    (if (equal? (db:test-state testinfo) "RUNNING") ;; (not (equal? (db:test-state testinfo) "COMPLETED"))
		(let ((new-state  (if kill-job "KILLED" "COMPLETED") ;; (if (eq? (vector-ref exit-info 2) 0) ;; exited with "good" status
				  ;; "COMPLETED"
				  ;; (db:test-state testinfo)))   ;; else preseve the state as set within the test
				  )
		      (new-status (cond
				   ((not (vector-ref exit-info 1)) "FAIL") ;; job failed to run
				   ((eq? rollup-status 0)
				    ;; if the current status is AUTO the defer to the calculated value (i.e. leave this AUTO)
				    (if (equal? (db:test-status testinfo) "AUTO") "AUTO" "PASS"))
				   ((eq? rollup-status 1) "FAIL")
				   ((eq? rollup-status 2)
				    ;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
				    (if (equal? (db:test-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
				   (else "FAIL")))) ;; (db:test-status testinfo)))
		  (debug:print-info 2 "Test NOT logged as COMPLETED, (state=" (db:test-state testinfo) "), updating result, rollup-status is " rollup-status)
		  (tests:test-set-status! test-id 
					  new-state
					  new-status
					  (args:get-arg "-m") #f)
		  ;; need to update the top test record if PASS or FAIL and this is a subtest
		  (if (not (equal? item-path ""))
		      (cdb:roll-up-pass-fail-counts *runremote* run-id test-name item-path new-status))))
	    ;; for automated creation of the rollup html file this is a good place...
	    (if (not (equal? item-path ""))
		(tests:summarize-items #f run-id test-id test-name #f)) ;; don't force - just update if no
	    )))
    (pop-directory)
    rollup-status))

	  ;; (set-signal-handler! signal/int (lambda ()
					    
	  ;; Do not run the test if it is REMOVING, RUNNING, KILLREQ or REMOTEHOSTSTART,
	  ;; Mark the test as REMOTEHOSTSTART *IMMEDIATELY*
	  ;;
	  (let ((test-info (rmt:get-testinfo-state-status run-id test-id)))
	    (cond
	     ((member (db:test-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "KILLREQ" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	      (debug:print 0 "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
	      (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")) ;; prime it for running
	     ((not (member (db:test-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ")))
	      (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a"))
	     (else ;; (member (db:test-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ"))
	      (debug:print 0 "ERROR: test state is " (db:test-state test-info) ", cannot proceed")
	      (exit))))
	  
	  (debug:print 2 "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
	  ;; one of these is defunct/redundant ...
	  (if (not (launch:setup-for-run force: #t))

	    (thread-join! th1)
	    (thread-sleep! 1)       ;; givbe thread th1 a chance to be done TODO: Verify this is needed. At 0.1 I was getting fail to stop, increased to total of 1.1 sec.
	    (mutex-lock! m)
	    (let* ((item-path (item-list->path itemdat))
		   ;; only state and status needed - use lazy routine
		   (testinfo  (rmt:get-testinfo-state-status run-id test-id)))
	      ;; Am I completed?
	      (if (member (db:test-state testinfo) '("REMOTEHOSTSTART" "RUNNING")) ;; NOTE: It should *not* be REMOTEHOSTSTART but for reasons I don't yet understand it sometimes gets stuck in that state ;; (not (equal? (db:test-state testinfo) "COMPLETED"))
		  (let ((new-state  (if kill-job? "KILLED" "COMPLETED") ;; (if (eq? (vector-ref exit-info 2) 0) ;; exited with "good" status
				                                        ;; "COMPLETED"
							                ;; (db:test-state testinfo)))   ;; else preseve the state as set within the test
				    )
			(new-status (cond
				     ((not (launch:einf-exit-status exit-info)) "FAIL") ;; job failed to run ... (vector-ref exit-info 1)
				     ((eq? (launch:einf-rollup-status exit-info) 0)     ;; (vector-ref exit-info 3)
				      ;; if the current status is AUTO then defer to the calculated value (i.e. leave this AUTO)
				      (if (equal? (db:test-status testinfo) "AUTO") "AUTO" "PASS"))
				     ((eq? (launch:einf-rollup-status exit-info) 1) "FAIL")  ;; (vector-ref exit-info 3)
				     ((eq? (launch:einf-rollup-status exit-info) 2)	     ;;	(vector-ref exit-info 3)
				      ;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
				      (if (equal? (db:test-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
				     (else "FAIL")))) ;; (db:test-status testinfo)))
		    (debug:print-info 1 "Test exited in state=" (db:test-state testinfo) ", setting state/status based on exit code of " (launch:einf-exit-status exit-info) " and rollup-status of " (launch:einf-rollup-status exit-info))
		    (tests:test-set-status! run-id 
					    test-id 
					    new-state
					    new-status
					    (args:get-arg "-m") #f)
		    ;; need to update the top test record if PASS or FAIL and this is a subtest
		    ;; NO NEED TO CALL roll-up-pass-fail-counts HERE, THIS IS DONE IN roll-up-pass-fail-counts called by tests:test-set-status!

    ;; tree is damaged or lost.
    ;; 
    (if (not (hash-table-ref/default *toptest-paths* testname #f))
	(let* ((testinfo       (rmt:get-test-info-by-id run-id test-id)) ;;  run-id testname item-path))
	       (curr-test-path (if testinfo ;; (filedb:get-path *fdb*
							     ;; (db:get-path dbstruct
				   ;; (rmt:sdb-qry 'getstr 
				   (db:test-rundir testinfo) ;; ) ;; )
				   #f)))
	  (hash-table-set! *toptest-paths* testname curr-test-path)
	  ;; NB// Was this for the test or for the parent in an iterated test?
	  (rmt:general-call 'test-set-rundir-shortdir run-id lnkpath 
			    (if (file-exists? lnkpath)
				(resolve-pathname lnkpath)
				lnkpath)

    (if hosts (set! hosts (string-split hosts)))
    ;; set the megatest to be called on the remote host
    (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
    (set! mt-bindir-path (pathname-directory remote-megatest))
    (if launcher (set! launcher (string-split launcher)))
    ;; set up the run work area for this test
    (if (and (args:get-arg "-preclean") ;; user has requested to preclean for this run
	     (not (member (db:test-rundir testinfo)(list "n/a" "/tmp/badname")))) ;; n/a is a placeholder and thus not a read dir
	(begin
	  (debug:print-info 0 "attempting to preclean directory " (db:test-rundir testinfo) " for test " test-name "/" item-path)
	  (runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record

    ;; prevent overlapping actions - set to LAUNCHED as early as possible
    ;;
    (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
    (rmt:roll-up-pass-fail-counts run-id test-name item-path #f "LAUNCHED")
    (set! diskpath (get-best-disk *configdat* tconfig))

		      	(handle-exceptions
			 exn
			 (begin
			   (debug:print 0 "ERROR: Bad data in test record? " test)
			   (print "exn=" (condition->list exn))
			   (debug:print 0 " message: " ((condition-property-accessor 'exn 'message) exn))
			   (print-call-chain (current-error-port)))
			 (let* ((test-id      (if (member "id"           tests-spec)(get-value-by-fieldname test test-field-index "id"          ) #f)) ;; (db:test-id         test))
				(testname     (if (member "testname"     tests-spec)(get-value-by-fieldname test test-field-index "testname"    ) #f)) ;; (db:test-testname   test))
				(itempath     (if (member "item_path"    tests-spec)(get-value-by-fieldname test test-field-index "item_path"   ) #f)) ;; (db:test-item-path  test))
				(comment      (if (member "comment"      tests-spec)(get-value-by-fieldname test test-field-index "comment"     ) #f)) ;; (db:test-comment    test))
				(tstate       (if (member "state"        tests-spec)(get-value-by-fieldname test test-field-index "state"       ) #f)) ;; (db:test-state      test))
				(tstatus      (if (member "status"       tests-spec)(get-value-by-fieldname test test-field-index "status"      ) #f)) ;; (db:test-status     test))
				(event-time   (if (member "event_time"   tests-spec)(get-value-by-fieldname test test-field-index "event_time"  ) #f)) ;; (db:test-event_time test))
				(rundir       (if (member "rundir"       tests-spec)(get-value-by-fieldname test test-field-index "rundir"      ) #f)) ;; (db:test-rundir     test))
				(final_logf   (if (member "final_logf"   tests-spec)(get-value-by-fieldname test test-field-index "final_logf"  ) #f)) ;; (db:test-final_logf test))
				(run_duration (if (member "run_duration" tests-spec)(get-value-by-fieldname test test-field-index "run_duration") #f)) ;; (db:test-run_duration test))
				(fullname     (conc testname
						    (if (equal? itempath "")
							"" 
							(conc "(" itempath ")")))))
			   (case dmode
			     ((json ods)
			      (if tests-spec

			     (else
			      (if (and tstate tstatus event-time)
				  (format #t
					  "  Test: ~25a State: ~15a Status: ~15a Runtime: ~5@as Time: ~22a Host: ~10a\n"
					  (if fullname fullname "")
					  (if tstate   tstate   "")
					  (if tstatus  tstatus  "")
					  (get-value-by-fieldname test test-field-index "run_duration");;(if test     (db:test-run_duration test) "")
					  (if event-time event-time "")
					  (get-value-by-fieldname test test-field-index "host")) ;;(if test (db:test-host test)) "")
				  (print "  Test: " fullname
					 (if tstate  (conc " State: "  tstate)  "")
					 (if tstatus (conc " Status: " tstatus) "")
					 (if (get-value-by-fieldname test test-field-index "run_duration")
					     (conc " Runtime: " (get-value-by-fieldname test test-field-index "run_duration"))
					     "")
					 (if event-time (conc " Time: " event-time) "")
					 (if (get-value-by-fieldname test test-field-index "host")
					     (conc " Host: " (get-value-by-fieldname test test-field-index "host"))
					     "")))
			      (if (not (or (equal? (get-value-by-fieldname test test-field-index "status") "PASS")
					   (equal? (get-value-by-fieldname test test-field-index "status") "WARN")
					   (equal? (get-value-by-fieldname test test-field-index "state")  "NOT_STARTED")))
				  (begin
				    (print   (if (get-value-by-fieldname test test-field-index "cpuload")
						 (conc "         cpuload:  "   (get-value-by-fieldname test test-field-index "cpuload"))
						 "") ;; (db:test-cpuload test)
					     (if (get-value-by-fieldname test test-field-index "diskfree")
						 (conc "\n         diskfree: " (get-value-by-fieldname test test-field-index "diskfree")) ;; (db:test-diskfree test)
						 "")
					     (if (get-value-by-fieldname test test-field-index "uname")
						 (conc "\n         uname:    " (get-value-by-fieldname test test-field-index "uname")) ;; (db:test-uname test)
						 "")
					     (if (get-value-by-fieldname test test-field-index "rundir")
						 (conc "\n         rundir:   " (get-value-by-fieldname test test-field-index "rundir")) ;; (db:test-rundir test)
						 "")
;;					     "\n         rundir:   " (get-value-by-fieldname test test-field-index "") ;; (sdb:qry 'getstr ;; (filedb:get-path *fdb* 
;; 					     (db:test-rundir test) ;; )
					     )
				    ;; Each test
				    ;; DO NOT remote run
				    (let ((steps (rmt:get-steps-for-test run-id (db:test-id test)))) ;; (db:get-steps-for-test dbstruct run-id (db:test-id test))))
				      (for-each 
				       (lambda (step)
					 (format #t 
						 "    Step: ~20a State: ~10a Status: ~10a Time ~22a\n"
						 (tdb:step-get-stepname step)
						 (tdb:step-get-state step)
						 (tdb:step-get-status step)

;;  T R I G G E R S
;;======================================================================

(define (mt:process-triggers run-id test-id newstate newstatus)
  (let* ((test-dat      (rmt:get-test-info-by-id run-id test-id)))
    (if test-dat
	(let* ((test-rundir   ;; (rmt:sdb-qry 'getstr ;; (filedb:get-path *fdb*
		(db:test-rundir test-dat)) ;; ) ;; )
	       (test-name     (db:test-testname test-dat))
	       (tconfig       #f)
	       (state         (if newstate  newstate  (db:test-state  test-dat)))
	       (status        (if newstatus newstatus (db:test-status test-dat))))
	  (if (and test-rundir   ;; #f means no dir set yet
		   (file-exists? test-rundir)
		   (directory? test-rundir))
	      (call-with-environment-variables
	       (list (cons "MT_TEST_NAME" test-name)
		     (cons "MT_TEST_RUN_DIR" test-rundir)
		     (cons "MT_ITEMPATH"     (db:test-item-path test-dat)))
	       (lambda ()
		 (push-directory test-rundir)
		 (set! tconfig (mt:lazy-read-test-config test-name))
		 (for-each (lambda (trigger)
			     (let ((cmd  (configf:lookup tconfig "triggers" trigger))
				   (logf (conc  test-rundir "/last-trigger.log")))
			       (if cmd

;; The function to update the fields in the test view panel
(define (test-update window-id testdat run-info-matrix test-info-matrix test-run-matrix meta-dat-matrix steps-matrix data-matrix)
  ;; get test-id
  ;; then get test record
  (if testdat
      (let* ((test-id      (hash-table-ref/default (dboard:data-get-curr-test-ids *data*) window-id #f))
	     (test-data    (hash-table-ref/default testdat test-id #f))
	     (run-id       (db:test-run_id test-data))
	     (targ/runname (hash-table-ref/default (dboard:data-get-run-keys *data*) 
						   run-id
						   '()))
	     (target       (if (null? targ/runname) "" (string-intersperse (reverse (cdr (reverse targ/runname))) "/")))
	     (runname      (if (null? targ/runname) "" (car (cdr targ/runname))))
	     (steps-dat    (tests:get-compressed-steps *dbstruct-local* run-id test-id)))
				

			      (iup:attribute-set! mat cell (conc key))
			      (iup:attribute-set! mat "REDRAW" cell)))
			(set! rownum (+ rownum 1))))
		    vals)))
	       (list 
		(list run-info-matrix
		      (if test-id
			  (list (db:test-run_id test-data)
				target
				runname
				"n/a")
			  (make-list 4 "")))
		(list test-info-matrix
		      (if test-id
			  (list test-id
				(db:test-testname test-data)
				(db:test-item-path test-data)
				(db:test-state    test-data)
				(db:test-status   test-data)
				(seconds->string (db:test-event_time test-data))
				(db:test-comment  test-data))
			  (make-list 7 "")))
		(list test-run-matrix
		      (if test-id
			  (list (db:test-host     test-data)
				(db:test-uname    test-data)
				(db:test-diskfree test-data)
				(db:test-cpuload  test-data)
				(seconds->hr-min-sec (db:test-run_duration test-data)))
			  (make-list 5 "")))
		))
	      (dcommon:populate-steps steps-dat steps-matrix))))))
		;;(list meta-dat-matrix
		;;      (if test-id
		;;	  (list (

  
;; db:test-id           
;; db:test-run_id       
;; db:test-testname     
;; db:test-state        
;; db:test-status       
;; db:test-event_time   
;; db:test-host         
;; db:test-cpuload      
;; db:test-diskfree     
;; db:test-uname        
;; db:test-rundir       
;; db:test-item-path    
;; db:test-run_duration 
;; db:test-final_logf   
;; db:test-comment      
;; db:test-fullname     	  


;;======================================================================
;; R U N   C O N T R O L
;;======================================================================

;; Overall runs browser

(define-inline (test:get-run_id vec)   (vector-ref vec 1))
(define-inline (test:get-test-name vec)(vector-ref vec 2))
(define-inline (test:get-state vec)    (vector-ref vec 3))
(define-inline (test:get-status vec)   (vector-ref vec 4))
(define-inline (test:get-item-path vec)(vector-ref vec 5))

(define-inline (test:test-get-fullname test)
   (conc (db:test-testname test)
	 (if (equal? (db:test-item-path test) "")
	     ""
	     (conc "(" (db:test-item-path test) ")"))))

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")
(include "test_records.scm")

(define (runs:test-get-full-path test)
  (let* ((testname (db:test-testname   test))
	 (itempath (db:test-item-path test)))
    (conc testname (if (equal? itempath "") "" (conc "(" itempath ")")))))

;; This is the *new* methodology. One record to inform them and in the chaos, organise them.
;;
;; NOT YET UTILIZED
;;
(define (runs:create-run-record)

	      (begin
		(debug:print 0 "ERROR: The proc from reading the items table did not yield a list - please report this")
		(exit 1))))))

     ((and (null? fails)
	   (null? prereq-fails)
	   (not (null? non-completed)))
      (let* ((allinqueue (map (lambda (x)(if (string? x) x (db:test-testname x)))
        		      (append newtal reruns)))
	     ;; prereqstrs is a list of test names as strings that are prereqs for hed
             (prereqstrs (delete-duplicates (map (lambda (x)(if (string? x) x (db:test-testname x)))
						 prereqs-not-met)))
	     ;; a prereq that is not found in allinqueue will be put in the notinqueue list
	     ;; 
             ;; (notinqueue (filter (lambda (x)
             ;;    		   (not (member x allinqueue)))
             ;;    		 prereqstrs))
	     (give-up    #f))

		  reruns))))

     ((and 
       (or (not (null? fails))
	   (not (null? prereq-fails)))
       (member 'normal testmode))
      (debug:print-info 1 "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
			(string-intersperse (map (lambda (t)(conc (db:test-testname t) ":" (db:test-state t)"/"(db:test-status t))) fails) ", ")
			", removing it from to-do list")
      (let ((test-id (rmt:get-test-id run-id hed "")))
	(if test-id
	    (if (not (null? prereq-fails))
		(mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_DISCARDED" "Failed to run due to prior failed prerequisites")
		(mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_FAIL"      "Failed to run due to failed prerequisites"))))
      (if (or (not (null? reg))(not (null? tal)))

(define (runs:mixed-list-testname-and-testrec->list-of-strings inlst)
  (if (null? inlst)
      '()
      (map (lambda (t)
	     (cond
	      ((vector? t)
	       (let ((test-name (db:test-testname t))
		     (item-path (db:test-item-path t))
		     (test-state (db:test-state t))
		     (test-status (db:test-status t)))
		 (conc test-name (if (equal? item-path "") "" "/") item-path ":" test-state "/" test-status)))
	      ((string? t)
	       t)
	      (else 
	       (conc t))))
	   inlst)))

	 (numcpus                 (common:get-num-cpus))
	 (maxload                 (string->number (or (configf:lookup *configdat* "jobtools" "maxload") "3")))
	 (waitdelay               (string->number (or (configf:lookup *configdat* "jobtools" "waitdelay") "60"))))
    (debug:print-info 4 "have-resources: " have-resources " prereqs-not-met: (" 
		      (string-intersperse 
		       (map (lambda (t)
			      (if (vector? t)
				  (conc (db:test-state t) "/" (db:test-status t))
				  (conc " WARNING: t is not a vector=" t )))
			    prereqs-not-met)
		       ", ") ") fails: " fails
		       "\nregistered? " (hash-table-ref/default test-registry (db:test-make-full-name test-name item-path) #f))
			    

    

		    (list (runs:queue-next-hed tal reg reglen regfull)
			  (runs:queue-next-tal tal reg reglen regfull)
			  (runs:queue-next-reg tal reg reglen regfull)
			  reruns ;; WAS: (cons hed reruns) ;; but that makes no sense?
			  ))
		  (let ((nth-try (hash-table-ref/default test-registry hed 0)))
		    (cond
		     ((member "RUNNING" (map db:test-state prereqs-not-met))
		      (if (runs:lownoise (conc "possible RUNNING prerequistes " hed) 60)
			  (debug:print 0 "WARNING: test " hed " has possible RUNNING prerequisites, don't give up on it yet."))
		      (thread-sleep! 4)
		      (list (runs:queue-next-hed newtal reg reglen regfull)
			    (runs:queue-next-tal newtal reg reglen regfull)
			    (runs:queue-next-reg newtal reg reglen regfull)
			    reruns))

			    reruns)))))))))

;; scan a list of tests looking to see if any are potentially runnable
(define (runs:runable-tests tests)
  (filter (lambda (t)
	    (if (not (vector? t))
		t
		(let ((state  (db:test-state t))
		      (status (db:test-status t)))
		  (case (string->symbol state)
		    ((COMPLETED INCOMPLETE) #f)
		    ((NOT_STARTED)
		     (if (member status '("TEN_STRIKES" "BLOCKED" "PREQ_FAIL" "ZERO_ITEMS" "PREQ_DISCARDED" "TIMED_OUT" ))
			 #f
			 t))
		    ((DELETED) #f)

	(last-time-incomplete  (- (current-seconds) 900)) ;; force at least one clean up cycle
	(last-time-some-running (current-seconds))
	(tdbdat                (tasks:open-db)))

    ;; Initialize the test-registery hash with tests that already have a record
    ;; convert state to symbol and use that as the hash value
    (for-each (lambda (trec)
		(let ((id (db:test-id        trec))
		      (tn (db:test-testname  trec))
		      (ip (db:test-item-path trec))
		      (st (db:test-state     trec)))
		  (if (not (equal? st "DELETED"))
		      (hash-table-set! test-registry (db:test-make-full-name tn ip) (string->symbol st)))))
	      tests-info)
    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))

    (let loop ((hed         (car sorted-test-names))
	       (tal         (cdr sorted-test-names))

    ;; LET* ((test-record
    ;; we get here on "drop through". All done!
    (debug:print-info 1 "All tests launched")))

(define (runs:calc-fails prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (member (db:test-state test) '("INCOMPLETE" "COMPLETED"))
		 (not (member (db:test-status test)
			      '("PASS" "WARN" "CHECK" "WAIVED" "SKIP")))))
	  prereqs-not-met))

(define (runs:calc-prereq-fail prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (equal? (db:test-state test) "NOT_STARTED")
		 (not (member (db:test-status test)
			      '("n/a" "KEEP_TRYING")))))
	  prereqs-not-met))

(define (runs:calc-not-completed prereqs-not-met)
  (filter
   (lambda (t)
     (or (not (vector? t))
	 (not (member (db:test-state t) '("INCOMPLETE" "COMPLETED")))))
   prereqs-not-met))

;; (define (runs:calc-not-completed prereqs-not-met)
;;   (filter
;;    (lambda (t)
;;      (or (not (vector? t))
;; 	 (not (equal? "COMPLETED" (db:test-state t)))))
;;    prereqs-not-met))

(define (runs:calc-runnable prereqs-not-met)
  (filter 
   (lambda (t)
     (or (not (vector? t))
	 (and (equal? "NOT_STARTED" (db:test-state t))
	      (member (db:test-status t)
			      '("n/a" "KEEP_TRYING")))))
   prereqs-not-met))

(define (runs:pretty-string lst)
  (map (lambda (t)
	 (if (not (vector? t))
	     (conc t)
	     (conc (db:test-testname t) ":" (db:test-state t) "/" (db:test-status t))))
       lst))

;; parent-test is there as a placeholder for when parent-tests can be run as a setup step
(define (run:test run-id run-info keyvals runname test-record flags parent-test test-registry all-tests-registry)
  ;; All these vars might be referenced by the testconfig file reader
  (let* ((test-name    (tests:testqueue-get-testname   test-record))
	 (test-waitons (tests:testqueue-get-waitons    test-record))

	    (if (not testdat)
		(begin
		  (debug:print-info 0 "WARNING: server is overloaded, trying again in one second")
		  (thread-sleep! 1)
		  (loop)))))
      (if (not testdat) ;; should NOT happen
	  (debug:print 0 "ERROR: failed to get test record for test-id " test-id))
      (set! test-id (db:test-id testdat))
      (if (file-exists? test-path)
	  (change-directory test-path)
	  (begin
	    (debug:print "ERROR: test run path not created before attempting to run the test. Perhaps you are running -remove-runs at the same time?")
	    (change-directory *toppath*)))
      (case (if force ;; (args:get-arg "-force")
		'NOT_STARTED

			   (set! *globalexitstatus* 1) ;; 
			   (process-signal (current-process-id) signal/kill))))))))
	((KILLED) 
	 (debug:print 1 "NOTE: " full-test-name " is already running or was explictly killed, use -force to launch it.")
	 (hash-table-set! test-registry (db:test-make-full-name test-name test-path) 'DONOTRUN)) ;; KILLED))
	((LAUNCHED REMOTEHOSTSTART RUNNING)  
	 (debug:print 2 "NOTE: " test-name " is already running"))
	;; (if (> (- (current-seconds)(+ (db:test-event_time testdat)
	;; 			       (db:test-run_duration testdat)))
	;; 	(or incomplete-timeout
	;; 	    6000)) ;; i.e. no update for more than 6000 seconds
	;;      (begin
	;;        (debug:print 0 "WARNING: Test " test-name " appears to be dead. Forcing it to state INCOMPLETE and status STUCK/DEAD")
	;;        (tests:test-set-status! run-id test-id "INCOMPLETE" "STUCK/DEAD" "" #f))
	;;        ;; (tests:test-set-status! test-id "INCOMPLETE" "STUCK/DEAD" "" #f))
	;;      (debug:print 2 "NOTE: " test-name " is already running")))

		    (debug:print-info 0 "action not recognised " action)))
		 
		 ;; actions that operate on one test at a time can be handled below
		 ;;
		 (let ((sorted-tests     (filter 
					  vector?
					  (sort tests (lambda (a b)(let ((dira ;; (rmt:sdb-qry 'getstr 
									  (db:test-rundir a)) ;; )  ;; (filedb:get-path *fdb* (db:test-rundir a)))
									 (dirb ;; (rmt:sdb-qry 'getstr 
									  (db:test-rundir b))) ;; ) ;; ((filedb:get-path *fdb* (db:test-rundir b))))
								     (if (and (string? dira)(string? dirb))
									 (> (string-length dira)(string-length dirb))
									 #f))))))
		       (toplevel-retries (make-hash-table)) ;; try three times to loop through and remove top level tests
		       (test-retry-time  (make-hash-table))
		       (allow-run-time   10)) ;; seconds to allow for killing tests before just brutally killing 'em
		   (let loop ((test (car sorted-tests))
			      (tal  (cdr sorted-tests)))
		     (let* ((test-id       (db:test-id test))
			    (new-test-dat  (rmt:get-test-info-by-id run-id test-id)))
		       (if (not new-test-dat)
			   (begin
			     (debug:print 0 "ERROR: We have a test-id of " test-id " but no record was found. NOTE: No locking of records is done between processes, do not simultaneously remove the same run from two processes!")
			     (if (not (null? tal))
				 (loop (car tal)(cdr tal))))
			   (let* ((item-path     (db:test-item-path new-test-dat))
				  (test-name     (db:test-testname new-test-dat))
				  (run-dir       ;;(filedb:get-path *fdb*
				   ;; (rmt:sdb-qry 'getid 
				   (db:test-rundir new-test-dat)) ;; )    ;; run dir is from the link tree
				  (test-state    (db:test-state new-test-dat))
				  (test-fulln    (db:test-fullname new-test-dat))
				  (uname         (db:test-uname    new-test-dat))
				  (toplevel-with-children (and (db:test-is-toplevel test)
							       (> (rmt:test-toplevel-num-items run-id test-name) 0))))
			     (case action
			       ((remove-runs)
				;; if the test is a toplevel-with-children issue an error and do not remove
				(if toplevel-with-children
				    (begin
				      (debug:print 0 "WARNING: skipping removal of " test-fulln " with run-id " run-id " as it has sub tests")

						  (hash-table-set! test-retry-time test-fulln (current-seconds))))
					    (if (> (- (current-seconds)(hash-table-ref test-retry-time test-fulln)) allow-run-time)
						;; This test is not in a correct state for cleaning up. Let's try some graceful shutdown steps first
						;; Set the test to "KILLREQ" and wait five seconds then try again. Repeat up to five times then give
						;; up and blow it away.
						(begin
						  (debug:print 0 "WARNING: could not gracefully remove test " test-fulln ", tried to kill it to no avail. Forcing state to FAILEDKILL and continuing")
					    (mt:test-set-state-status-by-id run-id (db:test-id test) "FAILEDKILL" "n/a" #f)
						  (thread-sleep! 1))
						(begin
					    (mt:test-set-state-status-by-id run-id (db:test-id test) "KILLREQ" "n/a" #f)
						  (thread-sleep! 1)))
					    ;; NOTE: This is suboptimal as the testdata will be used later and the state/status may have changed ...
					    (if (null? tal)
						(loop new-test-dat tal)
						(loop (car tal)(append tal (list new-test-dat)))))
					  (begin
					    (runs:remove-test-directory new-test-dat mode) ;; 'remove-all)
					    (if (not (null? tal))
						(loop (car tal)(cdr tal))))))))
			       ((set-state-status)
				(debug:print-info 2 "new state " (car state-status) ", new status " (cadr state-status))
				(mt:test-set-state-status-by-id run-id (db:test-id test) (car state-status)(cadr state-status) #f)
				(if (not (null? tal))
				    (loop (car tal)(cdr tal))))
			       ((run-wait)
				(debug:print-info 2 "still waiting, " (length tests) " tests still running")
				(thread-sleep! 10)
				(let ((new-tests (proc-get-tests run-id)))
				  (if (null? new-tests)

	 ))
     runs)
    ;; (sqlite3:finalize! (db:delay-if-busy tdbdat))
    )
  #t)

(define (runs:remove-test-directory test mode) ;; remove-data-only)
  (let* ((run-dir       (db:test-rundir test))    ;; run dir is from the link tree
	 (real-dir      (if (file-exists? run-dir)
			    (resolve-pathname run-dir)
			    #f)))
    (case mode
      ((remove-data-only)(mt:test-set-state-status-by-id (db:test-run_id test)(db:test-id test) "CLEANING" "LOCKED" #f))
      ((remove-all)      (mt:test-set-state-status-by-id (db:test-run_id test)(db:test-id test) "REMOVING" "LOCKED" #f))
      ((archive-remove)  (mt:test-set-state-status-by-id (db:test-run_id test)(db:test-id test) "ARCHIVE_REMOVING" #f #f)))
    (debug:print-info 1 "Attempting to remove " (if real-dir (conc " dir " real-dir " and ") "") " link " run-dir)
    (if (and real-dir 
	     (> (string-length real-dir) 5)
	     (file-exists? real-dir)) ;; bad heuristic but should prevent /tmp /home etc.
	(begin ;; let* ((realpath (resolve-pathname run-dir)))
	  (debug:print-info 1 "Recursively removing " real-dir)
	  (if (file-exists? real-dir)

	    (if (and run-dir
		     (not (member run-dir (list "n/a" "/tmp/badname"))))
		(debug:print 0 "WARNING: not removing " run-dir " as it either doesn't exist or is not a symlink")
		(debug:print 0 "NOTE: the run dir for this test is undefined. Test may have already been deleted."))
	    ))
    ;; Only delete the records *after* removing the directory. If things fail we have a record 
    (case mode
      ((remove-data-only)(mt:test-set-state-status-by-id (db:test-run_id test)(db:test-id test) "NOT_STARTED" "n/a" #f))
      ((archive-remove)  (mt:test-set-state-status-by-id (db:test-run_id test)(db:test-id test) "ARCHIVED" #f #f))
      (else (rmt:delete-test-records (db:test-run_id test) (db:test-id test))))))

;;======================================================================
;; Routines for manipulating runs
;;======================================================================

;; Since many calls to a run require pretty much the same setup 
;; this wrapper is used to reduce the replication of code

	 (prev-tests      (rmt:get-matching-previous-test-run-records new-run-id "%" "%"))
	 (curr-tests      (mt:get-tests-for-run new-run-id "%/%" '() '()))
	 (curr-tests-hash (make-hash-table)))
    (rmt:update-run-event_time new-run-id)
    ;; index the already saved tests by testname and itemdat in curr-tests-hash
    (for-each
     (lambda (testdat)
       (let* ((testname  (db:test-testname testdat))
	      (item-path (db:test-item-path testdat))
	      (full-name (conc testname "/" item-path)))
	 (hash-table-set! curr-tests-hash full-name testdat)))
     curr-tests)
    ;; NOPE: Non-optimal approach. Try this instead.
    ;;   1. tests are received in a list, most recent first
    ;;   2. replace the rollup test with the new *always*
    (for-each 
     (lambda (testdat)
       (let* ((testname  (db:test-testname testdat))
	      (item-path (db:test-item-path testdat))
	      (full-name (conc testname "/" item-path))
	      (prev-test-dat (hash-table-ref/default curr-tests-hash full-name #f))
	      (test-steps    (rmt:get-steps-for-test (db:test-id testdat)))
	      (new-test-record #f))
	 ;; replace these with insert ... select
	 (apply sqlite3:execute 
		db 
		(conc "INSERT OR REPLACE INTO tests (run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment) "
		      "VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?);")
		new-run-id (cddr (vector->list testdat)))
	 (set! new-testdat (car (mt:get-tests-for-run new-run-id (conc testname "/" item-path) '() '())))
	 (hash-table-set! curr-tests-hash full-name new-testdat) ;; this could be confusing, which record should go into the lookup table?
	 ;; Now duplicate the test steps
	 (debug:print 4 "Copying records in test_steps from test_id=" (db:test-id testdat) " to " (db:test-id new-testdat))
	 (cdb:remote-run ;; to be replaced, note: this routine is not used currently
	  (lambda ()
	    (sqlite3:execute 
	     db 
	     (conc "INSERT OR REPLACE INTO test_steps (test_id,stepname,state,status,event_time,comment) "
		   "SELECT " (db:test-id new-testdat) ",stepname,state,status,event_time,comment FROM test_steps WHERE test_id=?;")
	     (db:test-id testdat))
	    ;; Now duplicate the test data
	    (debug:print 4 "Copying records in test_data from test_id=" (db:test-id testdat) " to " (db:test-id new-testdat))
	    (sqlite3:execute 
	     db 
	     (conc "INSERT OR REPLACE INTO test_data (test_id,category,variable,value,expected,tol,units,comment) "
		   "SELECT " (db:test-id new-testdat) ",category,variable,value,expected,tol,units,comment FROM test_data WHERE test_id=?;")
	     (db:test-id testdat))))
	 ))
     prev-tests)))
	 
     

		    (loop (car tal)(cdr tal)(cons qry res)))))))
      #f))

;; Check for waiver eligibility
;;
(define (tests:check-waiver-eligibility testdat prev-testdat)
  (let* ((test-registry (make-hash-table))
	 (testconfig  (tests:get-testconfig (db:test-testname testdat) test-registry #f))
	 (test-rundir ;; (sdb:qry 'passstr 
	  (db:test-rundir testdat)) ;; )
	 (prev-rundir ;; (sdb:qry 'passstr 
	  (db:test-rundir prev-testdat)) ;; )
	 (waivers     (if testconfig (configf:section-vars testconfig "waivers") '()))
	 (waiver-rx   (regexp "^(\\S+)\\s+(.*)$"))
	 (diff-rule   "diff %file1% %file2%")
	 (logpro-rule "diff %file1% %file2% | logpro %waivername%.logpro %waivername%.html"))
    (if (not (file-exists? test-rundir))
	(begin
	  (debug:print 0 "ERROR: test run directory is gone, cannot propagate waiver")

  (mt:process-triggers run-id test-id state status))

;; Do not rpc this one, do the underlying calls!!!
(define (tests:test-set-status! run-id test-id state status comment dat #!key (work-area #f))
  (let* ((real-status status)
	 (otherdat    (if dat dat (make-hash-table)))
	 (testdat     (rmt:get-test-info-by-id run-id test-id))
	 (test-name   (db:test-testname  testdat))
	 (item-path   (db:test-item-path testdat))
	 ;; before proceeding we must find out if the previous test (where all keys matched except runname)
	 ;; was WAIVED if this test is FAIL

	 ;; NOTES:
	 ;;  1. Is the call to test:get-previous-run-record remotified?
	 ;;  2. Add test for testconfig waiver propagation control here
	 ;;
	 (prev-test   (if (equal? status "FAIL")
			  (rmt:get-previous-test-run-record run-id test-name item-path)
			  #f))
	 (waived   (if prev-test
		       (if prev-test ;; true if we found a previous test in this run series
			   (let ((prev-status  (db:test-status  prev-test))
				 (prev-state   (db:test-state   prev-test))
				 (prev-comment (db:test-comment prev-test)))
			     (debug:print 4 "prev-status " prev-status ", prev-state " prev-state ", prev-comment " prev-comment)
			     (if (and (equal? prev-state  "COMPLETED")
				      (equal? prev-status "WAIVED"))
				 (if comment
				     comment
				     prev-comment) ;; waived is either the comment or #f
				 #f))

		       (string<? (conc time-a)(conc time-b)))))))))


;; summarize test
(define (tests:summarize-test run-id test-id)
  (let* ((test-dat  (rmt:get-test-info-by-id run-id test-id))
	 (steps-dat (rmt:get-steps-for-test run-id test-id))
	 (test-name (db:test-testname test-dat))
	 (item-path (db:test-item-path test-dat))
	 (full-name (db:test-make-full-name test-name item-path))
	 (oup       (open-output-file (conc (db:test-rundir test-dat) "/test-summary.html")))
	 (status    (db:test-status   test-dat))
	 (color     (common:get-color-from-status status))
	 (logf      (db:test-final_logf test-dat))
	 (steps-dat (tests:get-compressed-steps #f run-id test-id)))
    ;; (dcommon:get-compressed-steps #f 1 30045)
    ;; (#("wasting_time" "23:36:13" "23:36:21" "0" "8.0s" "wasting_time.log"))

    (s:output-new
     oup
     (s:html
      (s:title "Summary for " full-name)
      (s:body 
       (s:h2 "Summary for " full-name)
       (s:table 'cellspacing "0" 'border "1"
	(s:tr (s:td "run id")   (s:td (db:test-run_id   test-dat))
	      (s:td "test id")  (s:td (db:test-id       test-dat)))
	(s:tr (s:td "testname") (s:td test-name)
	      (s:td "itempath") (s:td item-path))
	(s:tr (s:td "state")    (s:td (db:test-state    test-dat))
	      (s:td "status")   (s:td (s:a 'href logf (s:font 'color color status))))
	(s:tr (s:td "TestDate") (s:td (seconds->work-week/day-time 
				       (db:test-event_time test-dat)))
	      (s:td "Duration") (s:td (seconds->hr-min-sec (db:test-run_duration test-dat)))))
       (s:h3 "Log files")
       (s:table
	'cellspacing "0" 'border "1"
	(s:tr (s:td "Final log")(s:td (s:a 'href logf logf))))
       (s:table
	'cellspacing "0" 'border "1"
	(s:tr (s:td "Step Name")(s:td "Start")(s:td "End")(s:td "Status")(s:td "Duration")(s:td "Log File"))

	      (waitons     (tests:testqueue-get-waitons   test-record))
	      (keep-test   #t)
	      (test-id     (rmt:get-test-id run-id test-name item-path))
	      (tdat        (rmt:get-testinfo-state-status run-id test-id))) ;; (cdb:get-test-info-by-id *runremote* test-id)))
	 (if tdat
	     (begin
	       ;; Look at the test state and status
	       (if (or (and (member (db:test-status tdat) 
				    '("PASS" "WARN" "WAIVED" "CHECK" "SKIP"))
			    (equal? (db:test-state tdat) "COMPLETED"))
		       (member (db:test-state tdat)
				    '("INCOMPLETE" "KILLED")))
		   (set! keep-test #f))

	       ;; examine waitons for any fails. If it is FAIL or INCOMPLETE then eliminate this test
	       ;; from the runnable list
	       (if keep-test
		   (for-each (lambda (waiton)
			       ;; for now we are waiting only on the parent test
			       (let* ((parent-test-id (rmt:get-test-id run-id waiton ""))
				      (wtdat          (rmt:get-testinfo-state-status run-id test-id))) ;; (cdb:get-test-info-by-id *runremote* test-id)))
				 (if (or (and (equal? (db:test-state wtdat) "COMPLETED")
					      (member (db:test-status wtdat) '("FAIL" "ABORT")))
					 (member (db:test-status wtdat)  '("KILLED"))
					 (member (db:test-state wtdat)   '("INCOMPETE")))
				 ;; (if (or (member (db:test-status wtdat)
				 ;;        	 '("FAIL" "KILLED"))
				 ;;         (member (db:test-state wtdat)
				 ;;        	 '("INCOMPETE")))
				     (set! keep-test #f)))) ;; no point in running this one again
			     waitons))))
	 (if keep-test (set! runnables (cons testkeyname runnables)))))
     testkeynames)
    runnables))