Megatest

# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

TODO
====

WW38
. Add test_rundat to no-sync ==> correction, put in <testdir>/.meta/test-run.dat
. Add STATE/STATUS transitions to .meta/test-run.dat or similar
. Swizzle update-test-rundat to operate on no-sync
. Swizzle update-run-duration, -uname-host and cpuload-diskfree to no-sync
. On state/status change update tests table with duration

WW15
. fill newview matrix with data, filter pipeline gui elements
. improve [script], especially indent handling

WW16
. split db into megatest.db (runs etc.) db/<something>.db
. release basic newview implementation

WW18
. release split db implementation
. mtutil calls from dashboard (for remote control)
. logs browser (esp. for surfacing mtutil related activities)

WW19
. break command line into sections; all, run control, queries, utilities etc.
. pull in ftfplan (not integrated, just code pulled in)

WW20
. ./configure => ubuntu, sles11, sles12, rh7

. Add output flushing in teamcity support
. Switch to using simple runs query everywhere
. Add end_time to runs and add a rollup call that sets state, status and end_time

Future
. Switch to scsh-process pipeline management for job execution/control
. Use call-with-environment-variables more.

		    (let ((res (cons block-id archive-path)))
		      (hash-table-set! blockid-cache key res)
		      res)
		    (begin
		      (debug:print 0 *default-log-port* "WARNING: no disk found for " target ", " run-name ", " test-name ",  archive-path=" archive-path)
		      #f)))
	      (begin
		(debug:print 0 *default-log-port* "WARNING: no disk found for " target ", " run-name ", " test-name )
		#f)))))) ;; no best disk found

;; archive - run bup
;;
;; 1. create the bup dir if not exists
;; 2. start the du of each directory
;; 3. gen index

	  (toplevel/children
	   (debug:print 0 *default-log-port* "WARNING: cannot archive " test-name " with id " test-id
			" as it is a toplevel test with children"))
	  ((not (common:file-exists? test-path))
	   (debug:print 0 *default-log-port* "WARNING: Cannot archive " test-name "/" item-path
			" as path " test-path " does not exist"))
	  (else
	   (debug:print 2 *default-log-port*
			"From test-dat=" test-dat " derived the following:\n"
			"test-partial-path  = " test-partial-path "\n"
			"test-path          = " test-path "\n"
			"test-physical-path = " test-physical-path "\n"
			"partial-path-index = " partial-path-index "\n"
			"test-base          = " test-base)
	   (hash-table-set! disk-groups test-base

	       (create-directory archive-dir #t))
	   (case archiver
	     ((bup) ;; Archive using bup
	      (let* ((bup-init-params  (list "-d" archive-dir "init"))
		     (bup-index-params (append (list "-d" archive-dir "index") test-paths))
		     (bup-save-params  (append (list "-d" archive-dir "save" ;; (conc "--strip-path=" linktree)
						     (conc "-" compress) ;; or (conc "--compress=" compress)
						     "-n" (conc (common:get-testsuite-name) "-"(string-substitute "/" "-" target " "))
						     (conc "--strip-path=" (conc test-base target "/" )) ;; if we push to the directory do we need this?
						     )
					       test-paths)))
		(if (not (common:file-exists? (conc archive-dir "/HEAD")))
		    (begin
		      ;; replace this with jobrunner stuff enventually
		      (debug:print-info 2 *default-log-port* "Init bup in " archive-dir)
		      ;; (mutex-lock! bup-mutex)
		      (let-values (((pid-val exit-status exit-code) (run-n-wait bup-exe params: bup-init-params print-cmd: print-prefix)))
                        (if (not (eq? exit-code 0))
                              (begin    
                              (debug:print-error 0 *default-log-port* "There was an error initializing bup. Archive failed.")
                              (exit 1))))
		      ;; (mutex-unlock! bup-mutex)
		      ))
		(debug:print-info 2 *default-log-port* "Indexing data to be archived")
		;; (mutex-lock! bup-mutex)
		(let-values (((pid-val exit-status exit-code) (run-n-wait bup-exe params: bup-index-params print-cmd: print-prefix)))
                   (if (not (eq? exit-code 0))
                              (begin    
                              (debug:print-error 0 *default-log-port* "There was an error Indexing bup. Archive failed.")
                              (exit 1))))
		(debug:print-info 2 *default-log-port* "Archiving data with bup")
		(let-values (((pid-val exit-status exit-code) (run-n-wait bup-exe params: bup-save-params print-cmd: print-prefix)))
                     (if (not (eq? exit-code 0))
                              (begin    
                              (debug:print-error 0 *default-log-port* "There was an archiving data with bup. Archive failed.")
                              (exit 1))))))
	     ((7z tar)
	      (for-each
	       (lambda (test-dat)
		 (let* ((test-id           (db:test-get-id        test-dat))
			(test-name         (db:test-get-testname  test-dat))
			(item-path         (db:test-get-item-path test-dat))
			(test-full-name    (db:test-make-full-name test-name item-path))

        (rsync-exe (or (configf:lookup *configdat* "archive" "rsync") "rsync"))   
        (print-prefix      "Running: ") 
        (archive-info (archive:allocate-new-archive-block blockid-cache *toppath* tsname min-space target-patt run-patt "megatest-db"))
	(archive-dir  (if archive-info (cdr archive-info) #f))
	(archive-id   (if archive-info (car archive-info) -1))
        (home-host (common:get-homehost))
        (archive-time (seconds->std-time-str (current-seconds)))
        (archive-staging-db (conc *toppath* "/.db-snapshot/archive_" archive-time))
        (tmp-db-path (conc (common:get-db-tmp-area) "/megatest.db"))
        (dbfile             (conc  archive-staging-db "/megatest.db"))) 
        (create-directory archive-staging-db #t)
        (let-values (((pid-val exit-status exit-code) (run-n-wait rsync-exe params: (list "-v" (conc (car home-host) ":"tmp-db-path) archive-staging-db) print-cmd: print-prefix)))
            (if (eq? exit-code 0)   
              (case archiver
	        ((bup) ;; Archive using bup
	          (let* ((bup-init-params  (list "-d" archive-dir "init"))
		         (bup-index-params (list "-d" archive-dir "index" archive-staging-db))
		         (bup-save-params  (list "-d" archive-dir "save" ;; (conc "--strip-path=" linktree)
						     (conc "-" compress) ;; or (conc "--compress=" compress)
						     "-n" (conc tsname "-megatest-db" )
						     (conc "--strip-path=" archive-staging-db ) ;; if we push to the directory do we need this?
						     dbfile)))
                    (if (not (common:file-exists? (conc archive-dir "/HEAD")))
		      (begin
		        ;; replace this with jobrunner stuff enventually
		        (debug:print-info 2 *default-log-port* "Init bup in " archive-dir)
		         (let-values (((pid-val exit-status exit-code)(run-n-wait bup-exe params: bup-init-params print-cmd: print-prefix)))
                          (if (not (eq? exit-code 0))
                              (begin    
                              (debug:print-error 0 *default-log-port* "There was an error initializing bup. Archive failed.")
                              (exit 1))))))
		     (debug:print-info 2 *default-log-port* "Indexing data to be archived")
		     (let-values (((pid-val exit-status exit-code) (run-n-wait bup-exe params: bup-index-params print-cmd: print-prefix)))
                        (if (not (eq? exit-code 0))
                              (begin    
                              (debug:print-error 0 *default-log-port* "There was an error Indexing bup. Archive failed.")
                              (exit 1))))
		     (debug:print-info 2 *default-log-port* "Archiving data with bup")
		     (let-values (((pid-val exit-status exit-code) (run-n-wait bup-exe params: bup-save-params print-cmd: print-prefix)))
                         (if (not (eq? exit-code 0))
                              (begin    
                              (debug:print-error 0 *default-log-port* "There was an error archiving data with bup. Archive failed.")
                              (exit 1))
                             (debug:print-info 0 *default-log-port* "To restore megatest.db run megatest -archive replicacte-db -source archive-dir -time-stamp <ts>. Current timestamp: " (seconds->std-time-str (current-seconds))))))) 
               (else
                   (debug:print-info 0 *default-log-port* "No support for databse archiving with " archiver)))
               (debug:print-error 0 *default-log-port* "There was an error rsyncing tmp database")))))

(define (archive:restore-db archive-path ts)
   (let* ((bup-exe               (or (configf:lookup *configdat* "archive" "bup") "bup"))
         (archive-internal-path (conc (common:get-testsuite-name) "-megatest-db/" ts "/megatest.db" ))
         (bup-restore-params  (list "-d" archive-path "restore" "-C" *toppath* archive-internal-path)))
		 (debug:print-info 2 *default-log-port* "Restoring archived data to " *toppath* " from archive in " archive-path " ... " archive-internal-path)
		 (run-n-wait bup-exe params: bup-restore-params print-cmd: "Running:"))
      (sleep 2)
      (db:multi-db-sync 
       (db:setup #f)
       'killservers
       ;'dejunk
       ;'adj-testids
       'old2new
       )
      (debug:print-info 1 *default-log-port* "dropping triggers to update linktree") 
      (rmt:drop-all-triggers)

    (let* ((linktree       (common:get-linktree)) ;; (configf:lookup *configdat* "setup" "linktree")))
	  (src-archive-linktree (rmt:get-var "src-archive-linktree")))
        (if (not (equal? src-archive-linktree linktree))
           (rmt:update-tesdata-on-repilcate-db src-archive-linktree linktree))
              (debug:print-info 1 *default-log-port* "creating triggers after updating linktree")   
       (rmt:create-all-triggers)
))  

(define (seconds->std-time-str sec)
  (time->string 
   (seconds->local-time sec)
   "%Y-%m-%d-%H%M%S"))
 

(define (archive:get-timestamp-dir bup-exe archive-dir testsuite-name target test-partial-path test-last-update)
    (print (seconds->std-time-str test-last-update)) 
    (let* ((internal-path (conc testsuite-name "-" target))
           (ts-list (archive:ls->list  bup-exe archive-dir internal-path))
           (ds-flag (vector-ref (seconds->local-time) 8)))
           (let loop ((hed (car ts-list))
                       (tail (cdr ts-list)))
                   (if (and (null? tail) (equal? hed "latest"))
                        #f
                    (if (and (not (null? tail)) (equal? hed "latest"))

	      (test-id           (db:test-get-id        test-dat))
	      (run-id            (db:test-get-run_id    test-dat))
	      (keyvals           (rmt:get-key-val-pairs run-id))
	      (target            (string-intersperse (map cadr keyvals) "/"))
	      
	      (toplevel/children (and (db:test-get-is-toplevel test-dat)
				      (> (rmt:test-toplevel-num-items run-id test-name) 0)))
	      (test-partial-path (conc  run-name "/" (db:test-make-full-name test-name item-path)))
	      ;; note the trailing slash to get the dir inspite of it being a link
	      (test-path         (conc linktree "/" test-partial-path))
	      ;; if the old path was not deleted then prev-test-physical-path will end up pointing to a real directory
	      (mutex-lock! rp-mutex)
	      (prev-test-physical-path (if (common:file-exists? test-path)
					   ;; (read-symbolic-link test-path #t)
					   (common:real-path test-path)
					   #f))
	      (mutex-unlock! rp-mutex)
	      (new-test-physical-path  (conc best-disk "/" test-partial-path))
	      (archive-block-id        (db:test-get-archived test-dat))
              (test-last-update        (db:test-get-last_update test-dat))
	      (archive-block-info      (rmt:test-get-archive-block-info archive-block-id))
	      (archive-path            (if (vector? archive-block-info)
					   (vector-ref archive-block-info 2) ;; look in db.scm for test-get-archive-block-info for the vector record info
					   #f)) ;; no archive found?
              (archive-timestamp-dir   (if archive-path (archive:get-timestamp-dir bup-exe archive-path (common:get-testsuite-name) (string-substitute "/" "-" target " ") test-partial-path test-last-update) #f))  
	      (archive-internal-path   (conc (common:get-testsuite-name) "-" (string-substitute "/" "-" target " ") "/" archive-timestamp-dir "/" test-partial-path))
	      (include-paths           (args:get-arg "-include"))
	      (exclude-pattern         (args:get-arg "-exclude-rx"))
	      (exclude-file            (args:get-arg "-exclude-rx-from")))
	 (if (not archive-timestamp-dir)
               (debug:print-error 0 *default-log-port* "Archive not found for testsuite" (common:get-testsuite-name) " run/test/itempath" test-partial-path)
         (begin    
	 ;; some sanity checks, move an existing path out of the way - iif it is not a toplevel with children

                              id           INTEGER PRIMARY KEY,
                              test_id      INTEGER,
                              state        TEXT DEFAULT 'new',
                              status       TEXT DEFAULT 'n/a',
                              archive_type TEXT DEFAULT 'bup',
                              du           INTEGER,
                              archive_path TEXT);")))

        (db:create-triggers db)    
     db)) ;; )

;;======================================================================
;; A R C H I V E S
;;======================================================================

  (let* ((run-ids (db:get-all-run-ids mtdb)))
    (for-each 
     (lambda (run-id)
       (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id)))
	 (db:prep-megatest.db-adj-test-ids (db:dbdat-get-db mtdb) run-id testrecs)))
     run-ids)))

;; Get test data using test_id, run-id is not used - but it will be!
;; 
(define (db:get-test-info-by-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   #f ;; run-id
   #f
   (lambda (db)

			   (round 
			    (- 
			     (current-seconds) 
			     start-seconds)))))
	 (kill-tries 0))
    ;; (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area)
    ;; (tests:set-full-meta-info test-id run-id (calc-minutes) work-area)
    (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area 10 update-db: #t)

    (let loop ((minutes   (calc-minutes))
	       (cpu-load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
	       (disk-free (get-df (current-directory)))
               (last-sync (current-seconds)))
      ;; (common:telemetry-log "zombie" (conc "launch:monitor-job -
      ;; top of loop encountered at "(current-seconds)" with
      ;; last-sync="last-sync))
      (let* ((over-time     (> (current-seconds) (+ last-sync update-period)))
             (new-cpu-load  (let* ((load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
                                   (delta (abs (- load cpu-load))))
                              (if (> delta 0.1) ;; don't bother updating with small changes
                                  load
                                  #f)))
             (new-disk-free (let* ((df    (if over-time ;; only get df every 30 seconds

             (do-sync       (or new-cpu-load new-disk-free over-time))

             (test-info   (rmt:get-test-info-by-id run-id test-id))
             (state       (db:test-get-state test-info))
             (status      (db:test-get-status test-info))
             (kill-reason  "no kill reason specified")
             (kill-job?    #f))
        #;(common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        (cond
         ((test-get-kill-request run-id test-id)
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))
          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" (- (current-seconds) start-seconds) " seconds, limit=" runtlim))
          (set! kill-job? #t))
         ((equal? status "DEAD")
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f update-db: #t)
          (rmt:set-state-status-and-roll-up-items run-id test-id 'foo "RUNNING" "n/a" "was marked dead; really still running.")
          ;;(set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests (might indicate really overloaded server or else overzealous setup.deadtime)") ;; MARK RUNNING
          (set! kill-job? #f)))

        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)
        (launch:handle-zombie-tests run-id)
        (if do-sync ;; save meta data about the running of this test



	    (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f))


	(if kill-job? 
	    (begin
              (debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second
	      ;;       between tries?

	    (begin
	      (thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses
	      (if (hash-table-ref/default misc-flags 'keep-going #f)  ;; keep originals for cpu-load and disk-free unless they change more than the allowed delta
		  (loop (calc-minutes)
                        (or new-cpu-load cpu-load)
                        (or new-disk-free disk-free)
                        (if do-sync (current-seconds) last-sync)))))))
    (tests:update-central-meta-info run-id test-id (get-cpu-load) (get-df (current-directory))(calc-minutes) #f #f update-db: #t))) ;; NOTE: Checking twice for keep-going is intentional


(define (launch:execute encoded-cmd)
  (let* ((cmdinfo    (common:read-encoded-string encoded-cmd))
	 (tconfigreg #f))
    (setenv "MT_CMDINFO" encoded-cmd)
    ;;(bb-check-path msg: "launch:execute incoming")

				(db:test-get-host        test-info)
				(begin
				  (debug:print 0 *default-log-port* "ERROR: failed to find a record for test-id " test-id ", exiting.")
				  (exit))))
		 (test-pid  (db:test-get-process_id  test-info)))
	    (cond
             ;; -mrw- I'm removing KILLREQ from this list so that a test in KILLREQ state is treated as a "do not run" flag.
	     ((or (member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
		  (and (equal? (db:test-get-state test-info) "COMPLETED")                           ;; completed/abort => rerun if asked
		       (member (db:test-get-status test-info) '("ABORT"))))
	      (debug:print 0 *default-log-port* "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")

              (rmt:general-call 'set-test-start-time #f test-id)
              (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      ) ;; prime it for running
	     ((member (db:test-get-state test-info) '("RUNNING" "REMOTEHOSTSTART"))

         "-list-disks"
         "-list-targets"
         "-show-runconfig"
         ;;"-list-db-targets"
         "-show-runconfig"
         "-show-config"
         "-show-cmdinfo"
	 "-cleanup-db"
            ))
       (no-watchdog-argvals (list '("-archive" . "replicate-db")))
       (start-watchdog-specail-arg-val (let loop ((hed  (car no-watchdog-argvals))
                                                  (tail (cdr   no-watchdog-argvals)))
                                             (print "hed" hed " arg " (args:get-arg (car hed)) " val:" (cdr hed)  " eql" (equal? (args:get-arg (car hed)) (cdr hed)))  
                                             (if (equal? (args:get-arg (car hed)) (cdr hed))
                                               #f
                                               (if (null? tail)
                                                 #t
                                                 (loop (car tail) (cdr tail))))))      
       (no-watchdog-args-vals (filter (lambda (x) x)
                                      (map args:get-arg no-watchdog-args)))
       (start-watchdog (and (null? no-watchdog-args-vals) start-watchdog-specail-arg-val)))
       ;(print  "no-watchdog-args="no-watchdog-args "no-watchdog-args-vals="no-watchdog-args-vals " start-watchdog-specail-arg-val:" start-watchdog-specail-arg-val " start-watchdog:" start-watchdog) 
  (if start-watchdog
      (thread-start! *watchdog*)))


;; bracket open-output-file with code to make leading directory if it does not exist and handle exceptions
(define (open-logfile logpath-in)
  (condition-case

			 (print path))
		       paths))))))

;;======================================================================
;; Archive tests
;;======================================================================
;; Archive tests matching target, runname, and testpatt
(if (equal? (args:get-arg "-archive") "replicate-db")
    (begin
          ;; check if source
          ;; check if megatest.db exist
         (launch:setup)
         (if (not (args:get-arg "-source"))
             (begin 
             (debug:print-info 1 *default-log-port* "Missing required argument -source <archive path>")
             (exit 1)))
         (if (common:file-exists? (conc  *toppath* "/megatest.db"))
             (begin  
               (debug:print-info 1 *default-log-port* "File " (conc  *toppath* "/megatest.db") " already exists. Please remove it before trying to replicate db")

                  (begin 
                  (archive:restore-db src ts)
            (set! *didsomething* #t))
       (begin
         (debug:print-error 1 *default-log-port* "Path " source " not found")
         (exit 1))))))   
    ;; else do a general-run-call
   (if (and (args:get-arg "-archive") (not (equal? (args:get-arg "-archive") "replicate-db"))) 
    (begin
      ;; for the archive get we need to preserve the starting dir as part of the target path
      (if (and (args:get-arg "-dest")
	       (not (equal? (substring (args:get-arg "-dest") 0 1) "/")))
	  (let ((newpath  (conc (current-directory) "/" (args:get-arg "-dest"))))
	    (debug:print-info 1 *default-log-port* "Preserving original path to destination, was " (args:get-arg "-dest") ", now " newpath)
	    (hash-table-set! args:arg-hash "-dest" newpath)))

(use format typed-records) ;; RADT => purpose of json format??

(declare (unit rmt))
(declare (uses api))
(declare (uses http-transport))
(include "common_records.scm")
(include "db_records.scm")

;; (declare (uses rmtmod))

;; (import rmtmod)

;;
;; THESE ARE ALL CALLED ON THE CLIENT SIDE!!!
;;

;; Just some syntatic sugar
(define (rmt:register-test run-id test-name item-path)
  (rmt:general-call 'register-test run-id run-id test-name item-path))

(define (rmt:get-test-id run-id testname item-path)
  (rmt:send-receive 'get-test-id run-id (list run-id testname item-path)))

;; run-id is NOT used - but it will be! 
;;
(define (rmt:get-test-info-by-id run-id test-id)
  (if (number? test-id)
      (let* ((testdat  (rmt:send-receive 'get-test-info-by-id run-id (list run-id test-id)))
	     (trundatf (conc (db:test-get-rundir testdat) "/.mt_data/test-run.dat")))
	;; now we can update a couple fields from the filesystem
	(if (and (db:test-get-rundir testdat)
		 (file-exists? trundatf))
	    (let* ((duration   (db:test-get-run_duration testdat))
		   (event-time (db:test-get-event_time   testdat))
		   (last-touch (file-modification-time trundatf)))
	      (db:test-set-run_duration! testdat (max duration (- last-touch event-time)))))
	testdat)
      (begin
	(debug:print 0 *default-log-port* "WARNING: Bad data handed to rmt:get-test-info-by-id run-id=" run-id ", test-id=" test-id)
	(print-call-chain (current-error-port))
	#f)))

(define (rmt:test-get-rundir-from-test-id run-id test-id)
  (rmt:send-receive 'test-get-rundir-from-test-id run-id (list run-id test-id)))

;; delete redundant runs within a target - N is the input
;; delete redundant runs within a target IFF older than given date/time AND keep at least N
;; 
(define (runs:remove-all-but-last-n-runs-per-target target-patts runpatt num-to-keep #!key (actions '(print)))
  (let* ((runs-ht  (runs:get-hash-by-target target-patts runpatt))
	 (age      (if (args:get-arg "-age")(common:hms-string->seconds (args:get-arg "-age")) #f))
	 (age-mark (if age (- (current-seconds) age) (+ (current-seconds) 86400)))
	 (precmd   (or (args:get-arg "-precmd") ""))
         (action-chk (member (string->symbol "remove-runs") actions)))
     ;; check the sequence of actions  archive must comme before remove-runs
     (if  (and action-chk (member (string->symbol "archive") action-chk))
          (begin
          (debug:print-error 0 *default-log-port* "action remove-runs must come after archive")
          (exit 1))) 
    (print "Actions: " actions " age: " age)
    (for-each
     (lambda (action)
        (for-each
         (lambda (target)
            (let* ((runs      (hash-table-ref runs-ht target))
	           (sorted    (sort runs (lambda (a b)(< (simple-run-event_time a)(simple-run-event_time b)))))
	           (to-remove (let* ((len      (length sorted))
                                     (trim-amt (- len num-to-keep)))
                                 (if (> trim-amt 0)
                                    (take sorted trim-amt)
                                    '()))))
	   (hash-table-set! runs-ht target to-remove)
           (print target ":")
           (for-each
            (lambda (run)
              (let ((remove (member run to-remove (lambda (a b)
                                                    (eq? (simple-run-id a)
                                                         (simple-run-id b))))))
  	        (if (and age (> (simple-run-event_time run) age-mark))
		     (print "Skipping handling of " target "/" (simple-run-runname run) " as it is younger than " (args:get-arg "-age"))


		     (case action
		       ((print)
			(print " " (simple-run-runname run)
			       " " (time->string (seconds->local-time (simple-run-event_time run)) "WW%V.%u %H:%M:%S")
			       " " (if remove "REMOVE" "")))
		       ((remove-runs)
			(if remove (system (conc precmd " megatest -remove-runs -target " target " -runname " (simple-run-runname run) " -testpatt %"
						 (if (member 'kill-runs actions) ;; if kill-runs is specified then set -kill-wait to 0
						     " -kill-wait 0"
						     "")))))
		       ((archive)
			(if remove (system (conc precmd " megatest -archive save-remove -target " target " -runname " (simple-run-runname run) " -testpatt %"))))
		       ((kill-runs)
			(if remove (system (conc precmd " megatest -kill-runs -target " target " -runname " (simple-run-runname run) " -testpatt %"))))))))


            sorted)))


         (hash-table-keys runs-ht)))
      actions)
    runs-ht))

(define (remove-last-path-directory path-in)
  (let* ((dparts  (string-split path-in "/"))
    (path-out (conc "/" (string-intersperse (take dparts (- (length dparts) 1)) "/")))
    )
    path-out

    (sauthorize:db-do  (lambda (db)
        (let* ((data-row (query fetch (sql db (conc "SELECT  code, exe_name,  id, basepath  FROM  areas where areas.code = '" code "'")))))
         (set!  obj data-row))))
;(print obj)
obj))


(define (sauth-common:src-size path)
  (let ((output (with-input-from-pipe (conc "/usr/bin/du -s " path  "  | awk '{print $1}'")  
                 (lambda()
                  (read-line)))))
      (string->number output)))  

(define (sauth-common:space-left-at-dest path)
   (let* ((output  (run/string (pipe (df ,path ) (tail -1))))
         (size (caddr (cdr (string-split output " ")))))
  (string->number size)))

;; function to validate the users input for target path and resolve the path
;; TODO: Check for restriction in subpath 
(define (sauth-common:resolve-path  new current allowed-sheets)
   (let* ((target-path (append  current (string-split new "/")))
          (target-path-string (string-join target-path "/"))
          (normal-path (normalize-pathname target-path-string))

                                     base-path 
                                     (conc base-path "/" (string-join (cdr resolved-path) "/")))))
                    
	              
                           (if (and (not (equal? restricted-areas "" ))
                             (string-match (regexp  restrictions) target-path)) 
                           (begin
                              (sauth:print-error (conc "Access denied to " (string-join resolved-path "/")))
                              ;(exit 1)   
                            #f)
                             target-path)
                            
))
             #f)))

(define (spublish:shell-cp src-path target-path)  
  (cond
   ((not (file-exists? target-path))
	(sauth:print-error (conc " target Directory " target-path " does not exist!!")))
   ((not (file-exists? src-path))
    (sauth:print-error (conc "Source path " src-path " does not exist!!" )))
   (else
     (if (< (sauth-common:space-left-at-dest target-path) (sauth-common:src-size src-path))
          (begin 
             (sauth:print-error "Destination does not have enough disk space.")
             (exit 1)))    
     (if (is_directory src-path) 
        (begin
            (let* ((parent-dir src-path)
                   (start-dir target-path))
                 (run (pipe
                   (begin (system (conc "cd " parent-dir " ;tar chf - ." )))
                   (begin (change-directory start-dir)

                  (last-dir-name (if  (pathname-extension target-path)  
                                      (conc(pathname-file target-path) "." (pathname-extension target-path))
                                      (pathname-file target-path)))
                  (curr-dir (current-directory))   
                  (start-dir (conc (current-directory) "/" last-dir-name))
                  (execlude (make-exclude-pattern (string-split restrictions ",")))
                   (tmpfile (conc "/tmp/" (current-user-name) "/my-pipe-" (current-process-id))))
                    (sauth:print-error start-dir)
                    (if  (file-exists? start-dir)
                    (begin
                         (sauth:print-error (conclast-dir-name " already exist in your work dir."))
                         (sauth:print-error  "Nothing has been retrieved!!  "))
                     (begin
                   ;    (sretrieve:do-as-calling-user
                   ; (lambda ()

	 (lambda (count)
	   (set! res count))
	 tdb
	 "SELECT count(id) FROM test_rundat;")
	res))
  0)

;; 
(define (tests:update-central-meta-info run-id test-id cpuload diskfree minutes uname hostname #!key (update-db #f))
  (if (get-environment-variable "MT_TEST_RUN_DIR")
      (let* ((dest-dir (conc (get-environment-variable "MT_TEST_RUN_DIR") "/.mt_data"))
	     (or-dash  (lambda (instr)(if instr instr "-"))))
	(if (not (directory-exists? dest-dir))(create-directory dest-dir #t))
	(let* ((outp (open-output-file (conc dest-dir "/test-run.dat") #:append)))
	  (with-output-to-port outp
	    (lambda ()
	      (print (current-seconds) " " (or-dash run-id)  " " (or-dash test-id)  " "
		     (or-dash cpuload) " " (or-dash diskfree) " "
		     (or-dash minutes) " " (or-dash hostname) " "
		     (or-dash uname)))) ;; put uname last as it has spaces in it
	  (close-output-port outp)))
      (begin
	(rmt:general-call 'update-test-rundat run-id test-id (current-seconds) (or cpuload -1)(or diskfree -1) -1 (or minutes -1))))
  (if update-db
      (begin
	(if (and cpuload diskfree)
	    (rmt:general-call 'update-cpuload-diskfree run-id cpuload diskfree test-id))
	(if minutes 
	    (rmt:general-call 'update-run-duration run-id minutes test-id))
	(if (and uname hostname)
	    (rmt:general-call 'update-uname-host run-id uname hostname test-id)))))
  
;; This one is for running with no db access (i.e. via rmt: internally)
(define (tests:set-full-meta-info db test-id run-id minutes work-area remtries #!key (update-db #f))
;; (define (tests:set-full-meta-info test-id run-id minutes work-area)
;;  (let ((remtries 10))
  (let* ((cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory)))
	 (uname    (get-uname "-srvpio"))
	 (hostname (get-host-name)))
    (tests:update-central-meta-info run-id test-id cpuload diskfree minutes uname hostname update-db: update-db)))
    























	 
;;======================================================================
;; A R C H I V I N G
;;======================================================================

(define (test:archive db test-id)
  #f)