Megatest

    ok))

(define (client:connect iface port)
  (case (server:get-transport)
    ((rpc)  (rpc:client-connect  iface port))
    ((http) (http:client-connect iface port))
    ((zmq)  (zmq:client-connect  iface port))
    (else   (rpc:client-connect  iface port))))
    (else
     (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport *runremote*) " not supported (5)")
     (exit))))

(define (client:setup  run-id #!key (remaining-tries 10) (failed-connects 0))
  (case (server:get-transport)
    ((rpc) (rpc-transport:client-setup run-id remaining-tries: remaining-tries failed-connects: failed-connects)) ;;(client:setup-rpc run-id))
    ((rpc) (let ((res (client:setup-rpc run-id remaining-tries: remaining-tries)))
             (remote-conndat-set! *runremote* res)
             res))
    ((http)(client:setup-http run-id remaining-tries: remaining-tries failed-connects: failed-connects))
    (else
     (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport *runremote*) " not supported (6)")
    (else  (rpc-transport:client-setup run-id remaining-tries: remaining-tries failed-connects: failed-connects)))) ;; (client:setup-rpc run-id))))
     (exit)))) ;; (client:setup-rpc run-id))))

;; (define (client:login-no-auto-setup server-info run-id)
;;   (case (server:get-transport)
;;     ((rpc)  (rpc:login-no-auto-client-setup server-info run-id))
;;     ((http) (rmt:login-no-auto-client-setup server-info run-id))
;;     (else   (rpc:login-no-auto-client-setup server-info run-id))))
;; 

;;   2. We are a run tests, list runs or other interactive process and we must figure out
;;      *transport-type* and *runremote* from the monitor.db
;;
;; client:setup
;;
;; lookup_server, need to remove *runremote* stuff
;;

(define (client:setup-rpc run-id #!key (remaining-tries 10) (failed-connects 0))
  (debug:print-info 2 *default-log-port* "client:setup-rpc remaining-tries=" remaining-tries)
  (let* ((server-dat (tasks:get-server (db:delay-if-busy (tasks:open-db)) run-id))
         (num-available (tasks:num-in-available-state (db:delay-if-busy (tasks:open-db)) run-id)))
    (cond
     ((<= remaining-tries 0)
      (debug:print-error 0 *default-log-port* "failed to start or connect to server for run-id " run-id)
      (exit 1))
     (server-dat
      (debug:print-info 4 *default-log-port* "client:setup-rpc server-dat=" server-dat ", remaining-tries=" remaining-tries)

      (rpc-transport:client-setup run-id server-dat remaining-tries: remaining-tries))
     (else
      (if (< num-available 2)
          (server:try-running run-id))
      (thread-sleep! (+ 2 (random (- 20 remaining-tries)))) ;; give server a little time to start up, randomize a little to avoid start storms.
      (client:setup run-id remaining-tries: (- remaining-tries 1))))))


(define (client:setup-http run-id #!key (remaining-tries 10) (failed-connects 0))
  (debug:print-info 2 *default-log-port* "client:setup remaining-tries=" remaining-tries)
  (let* ((tdbdat (tasks:open-db)))
    (if (<= remaining-tries 0)
	(begin
	  (debug:print-error 0 *default-log-port* "failed to start or connect to server for run-id " run-id)
	  (exit 1))
	(let* ((server-dat (tasks:get-server (db:delay-if-busy tdbdat) run-id)))
	  (debug:print-info 4 *default-log-port* "client:setup server-dat=" server-dat ", remaining-tries=" remaining-tries)
	  (if server-dat
	      (let* ((iface     (tasks:hostinfo-get-interface server-dat))
		     (hostname  (tasks:hostinfo-get-hostname  server-dat))
		     (port      (tasks:hostinfo-get-port      server-dat))
		     (start-res (case *transport-type*
				  ((http)(http-transport:client-connect iface port))
		     (start-res (http-transport:client-connect iface port))
				  ;;((nmsg)(nmsg-transport:client-connect hostname port))
                                  ))
		     (ping-res  (case *transport-type* 
				  ((http)(rmt:login-no-auto-client-setup start-res))
		     (ping-res  (rmt:login-no-auto-client-setup start-res)))
				  ;; ((nmsg)(let ((logininfo (rmt:login-no-auto-client-setup start-res run-id)))
 				  ;;          (if logininfo
 				  ;;              (car (vector-ref logininfo 1))
 				  ;;              #f)))
                                  
                                  )))
		(if (and start-res
			 ping-res)
		    (begin
		      (remote-conndat-set! *runremote* start-res) ;; (hash-table-set! *runremote* run-id start-res)
		      (debug:print-info 2 *default-log-port* "connected to " (http-transport:server-dat-make-url start-res))
		      start-res)
		    (begin    ;; login failed but have a server record, clean out the record and try again

		(let ((num-available (tasks:num-in-available-state (db:dbdat-get-db tdbdat) run-id)))
		  (debug:print-info 0 *default-log-port* "client:setup, no server registered, remaining-tries=" remaining-tries " num-available=" num-available)
		  (if (< num-available 2)
		      (server:try-running run-id))
		  (thread-sleep! (+ 5 (random (- 20 remaining-tries))))  ;; give server a little time to start up, randomize a little to avoid start storms.
		  (client:setup run-id remaining-tries: (- remaining-tries 1)))))))))

;; keep this as a function to ease future 
;; keep this as a function to ease future ;; this is unused, not porting for rpc -BB
(define (client:start run-id server-info)
  (http-transport:client-connect (tasks:hostinfo-get-interface server-info)
				 (tasks:hostinfo-get-port server-info)))

;; ;; client:signal-handler
;; (define (client:signal-handler signum)
;;   (signal-mask! signum)

(import (prefix sqlite3 sqlite3:))
(import (prefix base64 base64:))

(declare (unit common))

(include "common_records.scm")
(include "thunk-utils.scm")


;; (require-library margs)
;; (include "margs.scm")

;; (define old-exit exit)
;; 
;; (define (exit . code)

  (mutex-lock! *context-mutex*)
  (let ((cxt (hash-table-ref/default *contexts* toppath #f)))
    (if (not cxt)
        (set! cxt (let ((x (make-cxt)))(hash-table-set! *contexts* toppath x) x)))
    (let ((cxt-mutex (cxt-mutex cxt)))
      (mutex-unlock! *context-mutex*)
      (mutex-lock! cxt-mutex)
      ;; here we guard proc with exception handler so
      ;; no matter how proc succeeds or fails,
      ;; the cxt-mutex will be unlocked afterward.
      (let* ((EXCEPTION-SYMBOL (gensym)) ;; use a generated symbol
             (guarded-proc               ;; to avoid collision
              (lambda args
      (let ((res (proc cxt)))
        (mutex-unlock! cxt-mutex)
        res))))
                (let* ((res (condition-case
                             (apply proc args)
                             [x () (cons EXCEPTION-SYMBOL x)])))
                 (mutex-unlock! cxt-mutex)
                 (if (and (pair? res) (eq? (car res) EXCEPTION))
                     (abort (cdr res))
                     res)))))
        (guarded-proc cxt)))))
        
(define *db-keys* #f)

(define *configinfo*   #f)   ;; raw results from setup, includes toppath and table from megatest.config
(define *runconfigdat* #f)   ;; run configs data
(define *configdat*    #f)   ;; megatest.config data
(define *configstatus* #f)   ;; status of data; 'fulldata : all processing done, #f : no data yet, 'partialdata : partial read done

(define *task-db*             #f) ;; (vector db path-to-db)
(define *db-access-allowed*   #t) ;; flag to allow access
(define *db-access-mutex*     (make-mutex))
(define *db-cache-path*       #f)

;; SERVER
(define *my-client-signature* #f)
(define *transport-type*    'http)             ;; override with [server] transport http|rpc|nmsg
(define *transport-type*  #f)             ;; override with [server] transport http|rpc|nmsg

(define *DEFAULT-TRANSPORT* "http")
(define (common:set-transport-type)
  (set! *transport-type*
        (string->symbol
         (or
          (args:get-arg "-transport")
          (configf:lookup *configdat* "server" "transport")
          *DEFAULT-TRANSPORT*)))
  *transport-type*)
  
(define *runremote*         #f)                ;; if set up for server communication this will hold <host port>
(define *max-cache-size*    0)
(define *logged-in-clients* (make-hash-table))
(define *server-id*         #f)
(define *server-info*       #f)
(define *time-to-exit*      #f)
(define *server-run*        #t)

			(thread-sleep! 1)
			(delay-loop (+ count 1))))
		  (loop)))
	    (if (common:low-noise-print 30)
		(debug:print-info 0 *default-log-port* "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*)))))))

(define (std-exit-procedure)
  
  (let ((no-hurry  (if *time-to-exit* ;; hurry up
		       #f
		       (begin
			 (set! *time-to-exit* #t)
			 #t))))
    (debug:print-info 4 *default-log-port* "starting exit process, finalizing databases.")
    (if (and no-hurry (debug:debug-mode 18))

			      (debug:print 4 *default-log-port* "Attempting clean exit. Please be patient and wait a few seconds...")
			      (if no-hurry
				  (thread-sleep! 5) ;; give the clean up few seconds to do it's stuff
				  (thread-sleep! 2))
			      (debug:print 4 *default-log-port* " ... done")
			      )
			    "clean exit")))

      ;; let's try to clean up open sockets
      (if *runremote*
          (case (remote-transport *runremote*)
            ((http) #t)
            ((rpc)  (rpc:close-all-connections!))
            (else
             (debug:print-info 0 *default-log-port* "Transport "(remote-transport *runremote*)" not supported"))))

      (thread-start! th1)
      (thread-start! th2)
      (thread-join! th1))))

(define (std-signal-handler signum)
  ;; (signal-mask! signum)
  (set! *time-to-exit* #t)

		     (cmdtype (list-ref matchdat 2)) ;; eval, system, shell, getenv
		     (cmd     (list-ref matchdat 3))
		     (poststr (list-ref matchdat 4))
		     (result  #f)
		     (start-time (current-seconds))
		     (cmdsym  (string->symbol cmdtype))
		     (fullcmd (case cmdsym
				((scheme)(conc "(lambda (ht)" cmd ")"))
				((system)(conc "(lambda (ht)(system \"" cmd "\"))"))
				((shell) (conc "(lambda (ht)(shell \""  cmd "\"))"))
				((getenv)(conc "(lambda (ht)(get-environment-variable \"" cmd "\"))"))
				((get)   
				((scheme scm) (conc "(lambda (ht)" cmd ")"))
				((system)     (conc "(lambda (ht)(system \"" cmd "\"))"))
				((shell sh)   (conc "(lambda (ht)(shell \""  cmd "\"))"))
				((realpath rp)(conc "(lambda (ht)(common:nice-path \"" cmd "\"))"))
				((getenv)     (conc "(lambda (ht)(get-environment-variable \"" cmd "\"))"))
				((get g)   
				 (let* ((parts (string-split cmd))
					(sect  (car parts))
					(var   (cadr parts)))
				   (conc "(lambda (ht)(config-lookup ht \"" sect "\" \"" var "\"))")))
				((runconfigs-get) (conc "(lambda (ht)(runconfigs-get ht \"" cmd "\"))"))
				((rget)           (conc "(lambda (ht)(runconfigs-get ht \"" cmd "\"))"))
				((runconfigs-get rget) (conc "(lambda (ht)(runconfigs-get ht \"" cmd "\"))"))
				;; ((rget)           (conc "(lambda (ht)(runconfigs-get ht \"" cmd "\"))"))
				(else "(lambda (ht)(print \"ERROR\") \"ERROR\")"))))
		;; (print "fullcmd=" fullcmd)
		(handle-exceptions
		 exn
		 (begin
		   (debug:print 0 *default-log-port* "WARNING: failed to process config input \"" l "\"")
		   (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))

(define (db:get-access-mode)
  (if (args:get-arg "-use-db-cache") 'cached 'rmt))

;; Add db direct
;;
(define (db:dispatch-query access-mode rmt-cmd db-cmd . params)
  (if (eq? access-mode 'cached)
      (print "not doing cached calls right now"))
      (debug:print 2 *default-log-port* "not doing cached calls right now"))
;;      (apply db:call-with-cached-db db-cmd params)
      (apply rmt-cmd params))
;;)

;; return the target db handle so it can be used
;;
(define (db:cache-for-read-only source target #!key (use-last-update #f))

    (sqlite3:for-each-row
     (lambda (rid)
       (set! row-ids (cons rid row-ids)))
     runsqry)
    (sqlite3:finalize! runsqry)
    row-ids))

;; finds latest matching all patts for given run-id
;;
(define (db:test-get-paths-matching-keynames-target-new dbstruct run-id keynames target res testpatt statepatt statuspatt runname)
  (let* ((testqry (tests:match->sqlqry testpatt))
	 (tstsqry (conc "SELECT rundir FROM tests WHERE " testqry " AND state LIKE '" statepatt "' AND status LIKE '" statuspatt "' ORDER BY event_time ASC;")))
	 (tstsqry (conc "SELECT rundir FROM tests WHERE run_id=? AND " testqry " AND state LIKE '" statepatt "' AND status LIKE '" statuspatt "' ORDER BY event_time ASC;")))
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (db)
       (sqlite3:for-each-row 
	(lambda (p)
	  (set! res (cons p res)))
	db
	tstsqry)
	tstsqry
	run-id)
       res))))

(define (db:test-toplevel-num-items dbstruct run-id testname)
  (db:with-db
   dbstruct
   run-id
   #f

<!DOCTYPE html>
<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<meta name="generator" content="AsciiDoc 8.6.7">
<meta name="generator" content="AsciiDoc 8.6.9">
<title>The Megatest Users Manual</title>
<style type="text/css">
/* Shared CSS for AsciiDoc xhtml11 and html5 backends */

/* Default font. */
body {
  font-family: Georgia,serif;

ul, ol, li > p {
  margin-top: 0;
}
ul > li     { color: #aaa; }
ul > li > * { color: black; }

pre {
.monospaced, code, pre {
  font-family: "Courier New", Courier, monospace;
  font-size: inherit;
  color: navy;
  padding: 0;
  margin: 0;
}
pre {
  white-space: pre-wrap;
}

#author {
  color: #527bbd;
  font-weight: bold;
  font-size: 1.1em;
}
#email {

div.exampleblock > div.content {
  border-left: 3px solid #dddddd;
  padding-left: 0.5em;
}

div.imageblock div.content { padding-left: 0; }
span.image img { border-style: none; }
span.image img { border-style: none; vertical-align: text-bottom; }
a.image:visited { color: white; }

dl {
  margin-top: 0.8em;
  margin-bottom: 0.8em;
}
dt {

/*
 * xhtml11 specific
 *
 * */

tt {
  font-family: "Courier New", Courier, monospace;
  font-size: inherit;
  color: navy;
}

div.tableblock {
  margin-top: 1.0em;
  margin-bottom: 1.5em;
}
div.tableblock > table {
  border: 3px solid #527bbd;
}

/*
 * html5 specific
 *
 * */

.monospaced {
  font-family: "Courier New", Courier, monospace;
  font-size: inherit;
  color: navy;
}

table.tableblock {
  margin-top: 1.0em;
  margin-bottom: 1.5em;
}
thead, p.tableblock.header {
  font-weight: bold;
  color: #527bbd;

body.manpage div.sectionbody {
  margin-left: 3em;
}

@media print {
  body.manpage div#toc { display: none; }
}


@media screen {
  body {
    max-width: 50em; /* approximately 80 characters wide */
    margin-left: 16em;
  }

  #toc {

</div>
</div>
</div>
<div class="sect1">
<h2 id="_reference">Reference</h2>
<div class="sectionbody">
<div class="sect2">
<h3 id="_config_file_helpers">Config File Helpers</h3>
<div class="paragraph"><p>Various helpers for more advanced config files.</p></div>
<table class="tableblock frame-topbot grid-all"
style="
width:80%;
">
<caption class="title">Table 2. Helpers</caption>
<col style="width:14%;">
<col style="width:28%;">
<col style="width:28%;">
<col style="width:28%;">
<thead>
<tr>
<th class="tableblock halign-center valign-top" >Helper                      </th>
<th class="tableblock halign-left valign-top" > Purpose                       </th>
<th class="tableblock halign-left valign-top" > Valid values            </th>
<th class="tableblock halign-left valign-top" > Comments</th>
</tr>
</thead>
<tbody>
<tr>
<td class="tableblock halign-center valign-top" ><p class="tableblock">#{scheme (scheme code&#8230;)}</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Execute arbitrary scheme code</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Any valid scheme</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Value returned from the call is converted to a string and processed as part of the config file</p></td>
</tr>
<tr>
<td class="tableblock halign-center valign-top" ><p class="tableblock">#{system command}</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Execute program, inserts exit code</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Any valid Unix command</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Discards the output from the program</p></td>
</tr>
<tr>
<td class="tableblock halign-center valign-top" ><p class="tableblock">#{shell  command} or #{sh &#8230;}</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Execute program, inserts result from stdout</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Any valid Unix command</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Value returned from the call is converted to a string and processed as part of the config file</p></td>
</tr>
<tr>
<td class="tableblock halign-center valign-top" ><p class="tableblock">#{realpath path} or #{rp &#8230;}</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Replace with normalized path</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Must be a valid path</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced"></p></td>
</tr>
<tr>
<td class="tableblock halign-center valign-top" ><p class="tableblock">#{getenv VAR} or #{gv VAR}</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Replace with content of env variable</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Must be a valid var</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced"></p></td>
</tr>
<tr>
<td class="tableblock halign-center valign-top" ><p class="tableblock">#{get s v} or #{g s v}</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Replace with variable v from section s</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Variable must be defined before use</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced"></p></td>
</tr>
<tr>
<td class="tableblock halign-center valign-top" ><p class="tableblock">#{rget v}</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced">Replace with variable v from target or default of runconfigs file</p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced"></p></td>
<td class="tableblock halign-left valign-top" ><p class="tableblock monospaced"></p></td>
</tr>
</tbody>
</table>
</div>
<div class="sect2">
<h3 id="_megatest_config_file_settings">Megatest Config File Settings</h3>
<h3 id="_config_file_settings">Config File Settings</h3>
<div class="paragraph"><p>Settings in megatest.config</p></div>
<div class="sect3">
<h4 id="_disk_space_checks">Disk Space Checks</h4>
<div class="paragraph"><p>Some parameters you can put in the [setup] section of megatest.config:</p></div>
<div class="listingblock">
<div class="content monospaced">
<pre># minimum space required in a run disk
minspace 10000000

</div>
<div class="sect2">
<h3 id="_database_settings">Database settings</h3>
<table class="tableblock frame-topbot grid-all"
style="
width:70%;
">
<caption class="title">Table 2. Database config settings in [setup] section of megatest.config</caption>
<caption class="title">Table 3. Database config settings in [setup] section of megatest.config</caption>
<col style="width:14%;">
<col style="width:28%;">
<col style="width:28%;">
<col style="width:28%;">
<thead>
<tr>
<th class="tableblock halign-center valign-top" >Var                       </th>

<div class="content monospaced">
<pre>[triggers]
COMPLETED/ xterm -e bash -s --</pre>
</div></div>
<div class="admonitionblock">
<table><tr>
<td class="icon">
<img src="/nfs/pdx/disks/ice.disk.002/icfadm/pkgs/asciidoc/8.6.7/images/icons/note.png" alt="Note">
<img src="/usr/images/icons/note.png" alt="Note">
</td>
<td class="content">There is a trailing space after the --</td>
</tr></table>
</div>
</div>
<div class="sect2">
<h3 id="_override_the_toplevel_html_file">Override the Toplevel HTML File</h3>

<h2 id="_programming_api">Programming API</h2>
<div class="sectionbody">
<div class="paragraph"><p>These routines can be called from the megatest repl.</p></div>
<table class="tableblock frame-topbot grid-all"
style="
width:70%;
">
<caption class="title">Table 3. API Keys Related Calls</caption>
<caption class="title">Table 4. API Keys Related Calls</caption>
<col style="width:14%;">
<col style="width:28%;">
<col style="width:28%;">
<col style="width:28%;">
<thead>
<tr>
<th class="tableblock halign-center valign-top" >API Call                        </th>

</div>
</div>
</div>
<div id="footnotes"><hr></div>
<div id="footer">
<div id="footer-text">
Version 1.0<br>
Last updated 2016-10-19 10:23:07 PDT
Last updated
 2016-11-27 13:47:38 MST
</div>
</div>
</body>
</html>

Reference
---------

Config File Helpers
~~~~~~~~~~~~~~~~~~~

Various helpers for more advanced config files.

.Helpers
[width="80%",cols="^,2m,2m,2m",frame="topbot",options="header"]
|======================
|Helper                      | Purpose                       | Valid values            | Comments
| #{scheme (scheme code...)} | Execute arbitrary scheme code | Any valid scheme        | Value returned from the call is converted to a string and processed as part of the config file
| #{system command}          | Execute program, inserts exit code  | Any valid Unix command  | Discards the output from the program
| #{shell  command} or #{sh ...}  | Execute program, inserts result from stdout | Any valid Unix command | Value returned from the call is converted to a string and processed as part of the config file
| #{realpath path} or #{rp ...}   | Replace with normalized path | Must be a valid path |
| #{getenv VAR} or #{gv VAR}      | Replace with content of env variable | Must be a valid var |
| #{get s v} or #{g s v}     | Replace with variable v from section s | Variable must be defined before use |
| #{rget v}                  | Replace with variable v from target or default of runconfigs file | |
|======================

Megatest Config File Settings
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Config File Settings
~~~~~~~~~~~~~~~~~~~~

Settings in megatest.config

Disk Space Checks
^^^^^^^^^^^^^^^^^

Some parameters you can put in the [setup] section of megatest.config:

-------------------

				      (res #f))
				 (cond
				  ((equal? (uri-path (request-uri (current-request)))
					   '(/ "api"))
				   (send-response body:    (api:process-request *dbstruct-db* $) ;; the $ is the request vars proc
						  headers: '((content-type text/plain)))
				   (mutex-lock! *heartbeat-mutex*)
				   (set! *db-last-access* (current-seconds))
				   (set! *db-lastaccess* (current-seconds))
				   (mutex-unlock! *heartbeat-mutex*))
				  ((equal? (uri-path (request-uri (current-request))) 
					   '(/ ""))
				   (send-response body: (http-transport:main-page)))
				  ((equal? (uri-path (request-uri (current-request))) 
					   '(/ "json_api"))
				   (send-response body: (http-transport:main-page)))

;;
;; connect
;;
(define (http-transport:client-connect iface port)
  (let* ((api-url      (conc "http://" iface ":" port "/api"))
	 (api-uri      (uri-reference (conc "http://" iface ":" port "/api")))
	 (api-req      (make-request method: 'POST uri: api-uri))
	 (server-dat   (vector iface port api-uri api-url api-req (current-seconds))))
	 (server-dat   (vector iface port api-uri api-url api-req (current-seconds) 'http)))
    server-dat))

;; run http-transport:keep-running in a parallel thread to monitor that the db is being 
;; used and to shutdown after sometime if it is not.
;;
(define (http-transport:keep-running server-id run-id)
  ;; if none running or if > 20 seconds since 

		      (begin
			(tasks:server-set-state! (db:delay-if-busy tdbdat) server-id "dbprep")
			(thread-sleep! 0.5) ;; give some margin for queries to complete before switching from file based access to server based access
			(set! *dbstruct-db*  (db:setup)) ;;  run-id))
			(set! server-going #t)
			(tasks:server-set-state! (db:delay-if-busy tdbdat) server-id "running")
			(server:write-dotserver *toppath* (conc iface ":" port))
			(delete-file* (conc *toppath* "/.starting-server")))
		      (begin ;; gotta exit nicely
                        (server:dotserver-starting-remove))
                      (begin ;; gotta exit nicely
			(tasks:server-set-state! (db:delay-if-busy tdbdat) server-id "collision")
			(http-transport:server-shutdown server-id port))))))

      ;; when things go wrong we don't want to be doing the various queries too often
      ;; so we strive to run this stuff only every four seconds or so.
      (let* ((sync-time (- (current-milliseconds) start-time))
	    (rem-time  (quotient (- 4000 sync-time) 1000)))

    (exit)))

;; all routes though here end in exit ...
;;
;; start_server? 
;;
(define (http-transport:launch run-id)
  (with-output-to-file
      (conc *toppath* "/.starting-server")
  (server:dotserver-starting)
    (lambda ()
      (print (current-process-id) " on " (get-host-name))))
  (let* ((tdbdat (tasks:open-db)))
    (set! *run-id*   run-id)
    (if (args:get-arg "-daemonize")
	(begin
	  (daemon:ize)
	  (if *alt-log-file* ;; we should re-connect to this port, I think daemon:ize disrupts it
	      (begin
		(current-error-port *alt-log-file*)
		(current-output-port *alt-log-file*)))))
    (if (and (server:read-dotserver *toppath*)
             (server:check-if-running run-id))
	(begin
	  (debug:print 0 *default-log-port* "INFO: Server for run-id " run-id " already running")
	  (exit 0))
	(begin ;; ok, no server detected, clean out any lingering records
	   (tasks:server-force-clean-running-records-for-run-id  (db:delay-if-busy tdbdat) run-id "notresponding")))
    (let loop ((server-id (tasks:server-lock-slot (db:delay-if-busy tdbdat) run-id))
    (let loop ((server-id (tasks:server-lock-slot (db:delay-if-busy tdbdat) run-id 'http))
	       (remtries  4))
      (if (not server-id)
	  (if (> remtries 0)
	      (begin
		(thread-sleep! 2)
		(loop (tasks:server-lock-slot (db:delay-if-busy tdbdat) run-id)
		(loop (tasks:server-lock-slot (db:delay-if-busy tdbdat) run-id 'http)
		      (- remtries 1)))
	      (begin
		;; since we didn't get the server lock we are going to clean up and bail out
		(debug:print-info 2 *default-log-port* "INFO: server pid=" (current-process-id) ", hostname=" (get-host-name) " not starting due to other candidates ahead in start queue")
		(tasks:server-delete-records-for-this-pid (db:delay-if-busy tdbdat) " http-transport:launch")
		(delete-file* (conc *toppath* "/.starting-server"))
                
                (server:dotserver-starting-remove)
		))
	  (let* ((th2 (make-thread (lambda ()
				     (debug:print-info 0 *default-log-port* "Server run thread started")
				     (http-transport:run 
				      (if (args:get-arg "-server")
					  (args:get-arg "-server")
					  "-")

	       " ms</td></tr>"
	       "<tr><td>Number non-cached queries</td> <td>"  *number-non-write-queries* "</td></tr>"
	       "<tr><td>Average non-cached time</td>   <td>" (if (eq? *number-non-write-queries* 0)
								 "n/a (no queries)"
								 (/ *total-non-write-delay* 
								    *number-non-write-queries*))
	       " ms</td></tr>"
	       "<tr><td>Last access</td><td>"              (seconds->time-string *db-last-access*) "</td></tr>"
	       "<tr><td>Last access</td><td>"              (seconds->time-string *last-db-access*) "</td></tr>"
	       "</table>")))
    (mutex-unlock! *heartbeat-mutex*)
    res))

(define (http-transport:runs linkpath)
  (conc "<h3>Runs</h3>"
	(string-intersperse

	      (set! *runconfigdat* rdat)
	      (set! *toppath*      toppath)
	      (set! *configstatus* 'partial))
	    (begin
	      (debug:print-error 0 *default-log-port* "No " mtconfig " file found. Giving up.")
	      (exit 2))))))
    ;; additional house keeping
    (common:set-transport-type)
    (let* ((linktree (or (getenv "MT_LINKTREE")
			 (if *configdat* (configf:lookup *configdat* "setup" "linktree") #f))))
      (if linktree
	  (begin
	    (if (not (file-exists? linktree))
		(begin
		  (handle-exceptions

  -load-test-data         : read test specific data for storage in the test_data table
                            from standard in. Each line is comma delimited with four
                            fields category,variable,value,comment

Queries
  -list-runs patt         : list runs matching pattern \"patt\", % is the wildcard
  -show-keys              : show the keys used in this megatest setup
  -test-files targpatt    : get the most recent test path/file matching targpatt e.g. %/%... 
  -test-files targpatt    : get the most recent test path/file matching targpatt e.g. %/% or '*.log'
                            returns list sorted by age ascending, see examples below
  -test-paths             : get the test paths matching target, runname, item and test
                            patterns.
  -list-disks             : list the disks available for storing runs
  -list-targets           : list the targets in runconfigs.config
  -list-db-targets        : list the target combinations used in the db
  -show-config            : dump the internal representation of the megatest.config file

			"-q" ;; quiet 0, errors/warnings only
		       )
		 args:arg-hash
		 0))

;; Add args that use remargs here
;;

(if (and (not (null? remargs))
	 (not (or
	       (args:get-arg "-runstep")
	       (args:get-arg "-envcap")
	       (args:get-arg "-envdelta")
	       )
	      ))

(if (args:get-arg "-server")

    ;; Server? Start up here.
    ;;
    (let ((tl        (launch:setup))
	;; (run-id    (and (args:get-arg "-run-id")
	;; 		  (string->number (args:get-arg "-run-id"))))
          (transport-type (string->symbol (or (args:get-arg "-transport") "http"))))
          (transport-type *transport-type*  ))
      ;; (if run-id
      ;;   (begin
      (server:launch 0 transport-type)
      (set! *didsomething* #t)))
;;     ;; (debug:print-error 0 *default-log-port* "server requires run-id be specified with -run-id")))
;; 
;;     ;; Not a server? This section will decide how to communicate
;;     ;;
;;     ;;  Setup client for all expect listed here

          (debug:print 0 *default-log-port* "Failed to create HTML output in " toppath "/lt/runs-index.html"))
      (set! *didsomething* #t)))

;;======================================================================
;; Exit and clean up
;;======================================================================

(if *runremote* (close-all-connections!)) ;; for http-client

(if (not *didsomething*)
    (debug:print 0 *default-log-port* help))

(set! *time-to-exit* #t)
(thread-join! *watchdog*)

;;======================================================================
;; Copyright 2006-2013, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

;;
(use format typed-records) ;; RADT => purpose of json format??

(declare (unit rmt))
(declare (uses api))
(declare (uses tdb))
(declare (uses http-transport))
(declare (uses rpc-transport))
;;(declare (uses nmsg-transport))
(include "common_records.scm")

;;
;; THESE ARE ALL CALLED ON THE CLIENT SIDE!!!
;;

     ;; if not on homehost ensure we have a connection to a live server
     ;; NOTE: we *have* a homehost record by now
     ((and (not (cdr (remote-hh-dat *runremote*)))        ;; are we on a homehost?
           (not (remote-conndat *runremote*)))            ;; and no connection
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  6  hh-dat: " (remote-hh-dat *runremote*) " conndat: " (remote-conndat *runremote*))
      (mutex-unlock! *rmt-mutex*)
      (tasks:start-and-wait-for-server (tasks:open-db) 0 15)
      (let* ((cinfo (rmt:get-connection-info 0))
             (transport (if cinfo
                            (vector-ref cinfo 6)
                            (server:get-transport)))) ;; TODO: replace with tasks:server-dat-accessor-?? for transport
      (remote-conndat-set! *runremote* (rmt:get-connection-info 0)) ;; calls client:setup which calls client:setup-http
        (remote-conndat-set! *runremote* cinfo) ;; calls client:setup which calls client:setup-http
        (remote-transport-set! *runremote* transport))
      (rmt:send-receive cmd rid params attemptnum: attemptnum))
     ;; all set up if get this far, dispatch the query
     ((cdr (remote-hh-dat *runremote*)) ;; we are on homehost
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  7")
      (rmt:open-qry-close-locally cmd (if rid rid 0) params))
     ;; not on homehost, do server query
     (else
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9")
      (let* ((conninfo (remote-conndat *runremote*))
	     (dat      (case (remote-transport *runremote*)
			 ((http) (condition-case ;; handling here has caused a lot of problems. However it is needed to deal with attemtped communication to servers that have gone away
                                  (http-transport:client-api-send-receive 0 conninfo cmd params)
                                  ((commfail)(vector #f "communications fail"))
                                  ((exn)(vector #f "other fail" (print-call-chain)))))
                         ((rpc) (condition-case ;; handling here has caused a lot of problems. However it is needed to deal with attemtped communication to servers that have gone away
                                  (rpc-transport:client-api-send-receive 0 conninfo cmd params)
                                  ((commfail)(vector #f "communications fail"))
                                  ((exn)(vector #f "other fail" (print-call-chain)))))
			 (else
			  (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport *runremote*) " not supported")
			  (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport *runremote*) " not supported (1)")
			  (exit))))
	     (success  (if (vector? dat) (vector-ref dat 0) #f))
	     (res      (if (vector? dat) (vector-ref dat 1) #f)))
	(if (vector? conninfo)(http-transport:server-dat-update-last-access conninfo)) ;; refresh access time
        (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9. conninfo=" conninfo " dat=" dat)
	(if success
	    (case (remote-transport *runremote*)
	      ((http) res)
	      ((http rpc) res)
	      (else
	       (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport *runremote*) " is unknown")
	       (exit 1)))
	    (begin
	      (debug:print 0 *default-log-port* "WARNING: communication failed. Trying again, try num: " attemptnum)
	      (remote-conndat-set!    *runremote* #f)
	      (remote-server-url-set! *runremote* #f)

		(mutex-lock! *db-multi-sync-mutex*)
		(set! *db-last-write* start-time) ;; the oldest "write"
                (mutex-unlock! *db-multi-sync-mutex*)))))
    res))

(define (rmt:send-receive-no-auto-client-setup connection-info cmd run-id params)
  (let* ((run-id   (if run-id run-id 0))
         (transport (or (remote-transport *runremote*) (server:get-transport)))
	 (res  	   (handle-exceptions
		    exn
		    #f
                    (case transport
		    (http-transport:client-api-send-receive run-id connection-info cmd params))))
                      ((http) (http-transport:client-api-send-receive run-id connection-info cmd params))
                      ((rpc) (rpc-transport:client-api-send-receive run-id connection-info cmd params))
                      (else
			  (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport *runremote*) " not supported (2)")
			  (exit))

                    ))))
    (if (and res (vector-ref res 0))
	(vector-ref res 1) ;;; YES!! THIS IS CORRECT!! CHANGE IT HERE, THEN CHANGE rmt:send-receive ALSO!!!
	#f)))

;; ;; Wrap json library for strings (why the ports crap in the first place?)
;; (define (rmt:dat->json-str dat)
;;   (with-output-to-string 

  (rmt:send-receive 'login run-id (list *toppath* megatest-version *my-client-signature*)))

;; This login does no retries under the hood - it acts a bit like a ping.
;; Deprecated for nmsg-transport.
;;
(define (rmt:login-no-auto-client-setup connection-info)
  (case *transport-type* ;; run-id of 0 is just a placeholder
    ((http)(rmt:send-receive-no-auto-client-setup connection-info 'login 0 (list *toppath* megatest-version *my-client-signature*)))
    ((http rpc)(rmt:send-receive-no-auto-client-setup connection-info 'login 0 (list *toppath* megatest-version *my-client-signature*)))
    (else
     (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport *runremote*) " not supported (3)")
     (exit))

    
    ;;((nmsg)(nmsg-transport:client-api-send-receive run-id connection-info 'login (list *toppath* megatest-version run-id *my-client-signature*)))
    ))

;; hand off a call to one of the db:queries statements
;; added run-id to make looking up the correct db possible 
;;
(define (rmt:general-call stmtname run-id . params)

;; Copyright 2006-2012, Matthew Welland.
;; Copyright 2006-2016, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.

(declare (uses common))
(declare (uses db))
(declare (uses tests))
(declare (uses tasks)) ;; tasks are where stuff is maintained about what is running.

(include "common_records.scm")
(include "db_records.scm")

(define *heartbeat-mutex* (make-mutex))
(define *server-loop-heart-beat* (current-seconds))


;; procstr is the name of the procedure to be called as a string
(define (rpc-transport:autoremote procstr params)
  (handle-exceptions
   exn
   (begin
     (debug:print 1 *default-log-port* "Remote failed for " proc " " params)
     (apply (eval (string->symbol procstr)) params))
   ;; (if *runremote*
   ;;    (apply (eval (string->symbol (conc "remote:" procstr))) params)
   (apply (eval (string->symbol procstr)) params)))
(define (rpc-transport:autoremote procstr params)  ;; may be unused, I think api-exec deprecates this one.
  (let* ((procsym (if (symbol? procstr)
                     procstr
                     (string->symbol (->string procstr))))
        (res
         (begin
           (apply (eval procsym) params))))
    res))


;; rpc receiver
(define (rpc-transport:api-exec cmd params)
  (let* ( (resdat  (api:execute-requests *dbstruct-db* (vector cmd params))) ;; #( flag result )
          (flag    (vector-ref resdat 0))
          (res     (vector-ref resdat 1)))

    (mutex-lock! *heartbeat-mutex*)

    (set! *last-db-access* (current-seconds)) ;; bump *last-db-access*; this will renew keep-running thread's lease on life for another (server:get-timeout) seconds
    ;;(BB> "in api-exec; last-db-access updated to "*last-db-access*)
    (mutex-unlock! *heartbeat-mutex*)

    res))


;; retry an operation (depends on srfi-18)
;; ==================
;; idea here is to avoid spending time on coding retrying something.  Trying to be generic here.
;;
;; Exception handling:
;; -------------------
;; if evaluating the thunk results in exception, it will be retried.
;; on last try, if final-failure-returns-actual is true, the exception will be re-thrown to caller.
;;
;; look at options below #!key to see how to configure behavior
;;
;;
(define (retry-thunk
         the-thunk
         #!key ;;;; options below
         (accept-result?   (lambda (x) x)) ;; retry if predicate applied to thunk's result is false 
         (retries                       4) ;; how many tries
         (failure-value                #f) ;; return this on final failure, unless following option is enabled:
         (final-failure-returns-actual #f) ;; on failure, on the last try, just return the result, not failure-value

         (retry-delay                 0.1) ;; delay between tries
         (back-off-factor               1) ;; multiply retry-delay by this factor on retry
         (random-delay                0.1) ;; add a random portion of this value to wait

         (chatty                       #f) ;; print status as we go, for debugging.
         )
  
  (when chatty (print) (print "Entered retry-thunk") (print "-=-=-=-=-=-"))
  (let* ((guarded-thunk ;; we are guarding the thunk against exceptions.  We will record whether result of evaluation is an exception or a regular result.
          (lambda ()
           (let* ((EXCEPTION (gensym)) ;; using gensym to avoid potential collision
                  (res
                   (condition-case
                    (the-thunk) ;; this is what we are guarding the execution of
                    [x () (cons EXCEPTION x)]
                    )))
             (cond
              ((and (pair? res) (eq? (car res) EXCEPTION))
               (if chatty
                   (print " - the-thunk threw exception >"(cdr res)"<"))
               (cons 'exception (cdr res)))
               (else
                (if chatty
                    (print " - the-thunk returned result >"res"<"))
                (cons 'regular-result res)))))))
    
    (let loop ((guarded-res (guarded-thunk))
               (retries-left retries)
               (fail-wait retry-delay))
      (if chatty (print "   =========="))
      (let* ((wait-time (+ fail-wait (+ (* fail-wait back-off-factor)
                                        (* random-delay
                                           (/ (random 1024) 1024) ))))
             (res-type (car guarded-res))
             (res-value (cdr guarded-res)))
        (cond
         ((and (eq? res-type 'regular-result) (accept-result? res-value))
                   (if chatty (print " + return result that satisfied accept-result? >"res-value"<"))
                   res-value)

         ((> retries-left 0)
          (if chatty (print " - sleep "wait-time))
          (thread-sleep! wait-time)
          (if chatty (print " + retry ["retries-left" tries left]"))
          (loop (guarded-thunk)
                (sub1 retries-left)
                wait-time))
         
         ((eq? res-type 'regular-result)
          (if final-failure-returns-actual
              (begin
                (if chatty (print " + last try failed- return the result >"res-value"<"))
                res-value)
              (begin
                (if chatty (print " + last try failed- return canned failure value >"failure-value"<"))
              failure-value)))
         
         (else ;; no retries left; result was not accepted and res-type can only be 'exception
          (if final-failure-returns-actual 
              (begin
                (if chatty (print " + last try failed with exception- re-throw it >"res-value"<"))
                (abort res-value)); re-raise the exception. TODO: find a way for call-history to show as though from entry to this function
              (begin
                (if chatty (print " + last try failed with exception- return canned failure value >"failure-value"<"))
                failure-value))))))))


(define (rpc-transport:server-shutdown server-id rpc:listener ) ;;#!key (from-on-exit #f))
  ;;(on-exit (lambda () #t)) ;; turn off on-exit stuff
  ;;(tcp-close rpc:listener) ;; gotta exit nicely
  ;;(tasks:server-set-state! (db:delay-if-busy (tasks:open-db)) server-id "stopped")


  ;; TODO: (low) the following is extraordinaritly slow.  Maybe we don't even need portlogger for rpc anyway??  the exception-based failover when ports are taken is fast!
  ;;(portlogger:open-run-close portlogger:set-port (rpc:default-server-port) "released")
  
  (set! *time-to-exit* #t)
  ;;(if *dbstruct-db* (db:sync-touched *dbstruct-db* *run-id* force-sync: #t))
  
  (server:remove-dotserver-file *toppath* "anyhost:anyport" force: #t)
  (tasks:server-delete-record (db:delay-if-busy (tasks:open-db)) server-id " rpc-transport:keep-running complete")
  
  (rpc:close-all-connections!)
  ;;(BB> "Before (exit) (from-on-exit="from-on-exit")")
  ;;(unless from-on-exit (exit))  ;; sometimes we hang (around) here with 100% cpu.
  ;;(BB> "After")
  ;; strace reveals endless:
  ;; getrusage(RUSAGE_SELF, {ru_utime={413, 917868}, ru_stime={0, 60003}, ...}) = 0
  ;; getrusage(RUSAGE_SELF, {ru_utime={414, 9874}, ru_stime={0, 60003}, ...}) = 0
  ;; getrusage(RUSAGE_SELF, {ru_utime={414, 13874}, ru_stime={0, 60003}, ...}) = 0
  ;; getrusage(RUSAGE_SELF, {ru_utime={414, 105880}, ru_stime={0, 60003}, ...}) = 0
  ;; getrusage(RUSAGE_SELF, {ru_utime={414, 109880}, ru_stime={0, 60003}, ...}) = 0
  ;; getrusage(RUSAGE_SELF, {ru_utime={414, 201886}, ru_stime={0, 60003}, ...}) = 0
  ;; getrusage(RUSAGE_SELF, {ru_utime={414, 205886}, ru_stime={0, 60003}, ...}) = 0
  ;; getrusage(RUSAGE_SELF, {ru_utime={414, 297892}, ru_stime={0, 60003}, ...}) = 0
  ;; getrusage(RUSAGE_SELF, {ru_utime={414, 301892}, ru_stime={0, 60003}, ...}) = 0
  ;; getrusage(RUSAGE_SELF, {ru_utime={414, 393898}, ru_stime={0, 60003}, ...}) = 0
  ;; getrusage(RUSAGE_SELF, {ru_utime={414, 397898}, ru_stime={0, 60003}, ...}) = 0
  ;; make a post to chicken-users w/ http://paste.call-cc.org/paste?id=60a4b66a29ccf7d11359ea866db642c970735978


  ;; (if from-on-exit
  ;;     ;; avoid above condition!  End current process externally  since 1 in 20 (exit)'s result in hung, 100% cpu zombies. (see above)
  
  (system (conc  "kill -9  "(current-process-id)))
  )


;; all routes though here end in exit ...
;;
;; start_server? 
;;
(define (rpc-transport:launch run-id)
  (let* ((tdbdat (tasks:open-db)))
    (BB> "rpc-transport:launch fired for run-id="run-id)
    (set! *run-id*   run-id)
    (if (args:get-arg "-daemonize")
        (daemon:ize))
    (if (server:check-if-running run-id)
  (set! *run-id*   run-id)

  ;; ;; send to background if requested
  ;; (when (args:get-arg "-daemonize")
  ;;     (daemon:ize)
  ;;     (when *alt-log-file* ;; we should re-connect to this port, I think daemon:ize disrupts it
  ;;       (current-error-port *alt-log-file*)
  ;;       (current-output-port *alt-log-file*)))

  ;; double check we dont alrady have a running server for this run-id
  (when (and (server:read-dotserver *toppath*)
             (server:check-if-running run-id))
        (begin
          (debug:print 0 *default-log-port* "INFO: Server for run-id " run-id " already running")
          (exit 0)))
    (let loop ((server-id (tasks:server-lock-slot (db:delay-if-busy tdbdat) run-id))
               (remtries  4))
      (if (not server-id)
          (if (> remtries 0)
              (begin
                (thread-sleep! 2)
                (loop (tasks:server-lock-slot (db:delay-if-busy tdbdat) run-id)
                      (- remtries 1)))
              (begin
                ;; since we didn't get the server lock we are going to clean up and bail out
                (debug:print-info 2 *default-log-port* "INFO: server pid=" (current-process-id) ", hostname=" (get-host-name) " not starting due to other candidates ahead in start queue")
    (debug:print 0 *default-log-port* "INFO: Server for run-id " run-id " already running")
    (exit 0))

  ;; did not find server running, let's clean up the table of dead servers
  (tasks:server-force-clean-running-records-for-run-id  (db:delay-if-busy (tasks:open-db)) run-id "notresponding")  

  (server:dotserver-starting)

  


  
  ;; let's get a server-id for this server
  ;;   if at first we do not suceed, try 3 more times.
  (let ((server-id (retry-thunk
                    (lambda () (tasks:server-lock-slot (db:delay-if-busy (tasks:open-db)) run-id 'rpc))
                    chatty: #f
                    final-failure-returns-actual: #t
                    retries: 4)))
    (when (not server-id) ;; dang we couldn't get a server-id.
      ;; since we didn't get the server lock we are going to clean up and bail out


      (debug:print-info 2 *default-log-port* "INFO: server pid=" (current-process-id) ", hostname=" (get-host-name) " not starting due to other candidates ahead in start queue")
      (tasks:server-delete-records-for-this-pid (db:delay-if-busy (tasks:open-db)) " rpc-transport:launch")
      (server:dotserver-starting-remove)
      (exit 1))

    ;; we got a server-id (and a corresponding entry in servers table in globally shared mdb)
    ;; all systems go.  Proceed to setup rpc server.  
    (rpc-transport:run
     (if (args:get-arg "-server")
         (args:get-arg "-server")
         "-")
     run-id
     server-id)
    (exit)))

(define *rpc-listener-port* #f)
(define *rpc-listener-port-bind-timestamp* #f)

(define *on-exit-flag #f)

(define (rpc-transport:server-dat-get-iface         vec)    (vector-ref  vec 0))
(define (rpc-transport:server-dat-get-port          vec)    (vector-ref  vec 1))
(define (rpc-transport:server-dat-get-last-access   vec)    (vector-ref  vec 5))
(define (rpc-transport:server-dat-get-transport     vec)    (vector-ref  vec 6))
(define (rpc-transport:server-dat-update-last-access vec)
  (if (vector? vec)
      (vector-set! vec 5 (current-seconds))
      (begin
	(print-call-chain (current-error-port))
	(debug:print-error 0 *default-log-port* "call to rpc-transport:server-dat-update-last-access with non-vector!!"))))


(define *api-exec-ht* (make-hash-table))
(define *api-exec-mutex* (make-mutex))
;; let's see if caching the rpc stub curbs thread-profusion on server side
(define (rpc-transport:get-api-exec iface port)
  (mutex-lock! *api-exec-mutex*)
  (let* ((lu (hash-table-ref/default *api-exec-ht* (cons iface  port) #f)))
    (if lu
        (begin
          (mutex-unlock! *api-exec-mutex*)
          lu)
        (let ((res (rpc:procedure 'api-exec iface port)))
          (hash-table-set! *api-exec-ht* (cons iface port) res)
          (mutex-unlock! *api-exec-mutex*)
          res))))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; this client-side procedure makes rpc call to server and returns result
;;
(define (rpc-transport:client-api-send-receive run-id serverdat cmd params #!key (numretries 3))
  ;;(BB> "entered rpc-transport:client-api-send-receive with run-id="run-id " serverdat="serverdat" cmd="cmd" params="params" numretries="numretries)
  (if (not (vector? serverdat))
      (begin
        (BB> "WHAT?? for run-id="run-id", serverdat="serverdat)
        (print-call-chain)
        (rpc:close-all-connections!)
        (exit 1)))
  (let* ((iface (rpc-transport:server-dat-get-iface serverdat))
         (port  (rpc-transport:server-dat-get-port serverdat))
         (res #f)
         (api-exec (rpc-transport:get-api-exec iface port))  ;; chached by host/port. may need to clear...
         (send-receive (lambda ()
                         (tcp-buffer-size 0)
                         (set! res (retry-thunk
                                    (lambda ()
                                      (condition-case
                                       ;;(vector #t (run-remote cmd params))
                                       (vector 'success (api-exec cmd params))
                                       [x (exn i/o net) (vector 'comms-fail (conc "communications fail ["(->string x)"]") x)]
                                       [x () (vector 'other-fail "other fail ["(->string x)"]" x)]))
                                    chatty: #f
                                    accept-result?: (lambda(x)
                                                      (and (vector? x) (vector-ref x 0)))
                                    retries: 8
                                    back-off-factor: 1.5
                                    random-wait: 0.2
                                    retry-delay: 0.1
                                    final-failure-returns-actual: #t))
                         ;;(BB> "HEY res="res)
                         res
                         ))
         (th1 (make-thread send-receive "send-receive"))
         (time-out-reached #f)
         (time-out     (lambda ()
			      (thread-sleep! 45)
                              (set! time-out-reached #t)
                              (thread-terminate! th1)
                              
			      #f))

         (th2 (make-thread time-out     "time out")))
	 (thread-start! th1)
	 (thread-start! th2)
	 (thread-join! th1)
	 (thread-terminate! th2)
         ;;(BB> "alt got res="res)
	 (debug:print-info 11 *default-log-port* "got res=" res)
	 (if (vector? res)
             (case (vector-ref res 0)
               ((success) (vector #t (vector-ref res 1)))
               (
                (comms-fail other-fail)
                ;;(comms-fail) 
                (debug:print 0 *default-log-port* "WARNING: comms failure for rpc request >>"res"<<")
                (tasks:server-delete-records-for-this-pid (db:delay-if-busy tdbdat) " rpc-transport:launch")))
          (begin
            (rpc-transport:run (if (args:get-arg "-server")(args:get-arg "-server") "-") run-id server-id)
            (exit))))))
                ;;(debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
                (vector #f (vector-ref res 1)))
               (else
                (debug:print-error 0 *default-log-port* "error occured at server, info=" (vector-ref res 1))
                (debug:print 0 *default-log-port* " client call chain:")
                (print-call-chain (current-error-port))
                (debug:print 0 *default-log-port* " server call chain:")
                (pp (vector-ref res 1) (current-error-port))
                (signal (vector-ref res 2))))
             (signal (make-composite-condition
                      (make-property-condition 
             	       'timeout
             	       'message "nmsg-transport:client-api-send-receive-raw timed out talking to server"))))))
        


(define (rpc-transport:run hostn run-id server-id)
  (debug:print 2 *default-log-port* "Attempting to start the rpc server ...")
   ;; (trace rpc:publish-procedure!)

  ;;======================================================================
  ;;	  start of publish-procedure section
  ;;======================================================================
  (rpc:publish-procedure! 'server:login server:login)
  (rpc:publish-procedure! 'testing (lambda () "Just testing"))
  (rpc:publish-procedure! 'server:login server:login) ;; this allows client to validate it is the same megatest instance as the server.  No security here, just making sure we're in the right room.
  (rpc:publish-procedure!
   'testing
   (lambda ()
     "Just testing"))

  ;; procedure to receive arbitrary API request from client's rpc:send-receive/rpc-transport:client-api-send-receive 
  (rpc:publish-procedure! 'rpc-transport:autoremote rpc-transport:autoremote)
  ;; can use this to run most anything at the remote
  (rpc:publish-procedure! 'api-exec rpc-transport:api-exec)
  
  
  ;;======================================================================
  ;;	  end of publish-procedure section
  ;;======================================================================


  (let* ((db              #f)
	 (hostname        (get-host-name))
	 (ipaddrstr       (let ((ipstr (if (string=? "-" hostn)
	 (hostname        (let ((res (get-host-name)))  res))
         (server-start-time (current-seconds))
         (server-timeout (server:get-timeout))
	 (ipaddrstr       (let* ((ipstr (if (string=? "-" hostn)
					   ;; (string-intersperse (map number->string (u8vector->list (hostname->ip hostname))) ".")
					   (server:get-best-guess-address hostname)
					   #f)))
			    (if ipstr ipstr hostn))) ;; hostname))) 
	 (start-port      (open-run-close tasks:server-get-next-port tasks:open-db))
					   #f))
                                 (res (if ipstr ipstr hostn)))
                            res)) ;; hostname))) 
	 (start-port      (let ((res (portlogger:open-run-close portlogger:find-port)))      ;; BB> TODO: remove portlogger!
                            res))
	 (link-tree-path  (configf:lookup *configdat* "setup" "linktree"))

         ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
         ;; rpc:listener is the tcp-listen result from inside the find-free-port-and-open complex.
         ;;   It is our handle on the listening tcp port
         ;;   We will attach this to our rpc server with rpc:make-server in thread th1 .
	 (rpc:listener    (rpc-transport:find-free-port-and-open (rpc:default-server-port)))
	 (rpc:listener    (rpc-transport:find-free-port-and-open start-port)) 
	 (th1             (make-thread
			   (lambda ()
                             ;;(BB> "BEFORE rpc:make-server")
			     ((rpc:make-server rpc:listener) #t))
			     ((rpc:make-server rpc:listener) #t)
                             ;;(BB> "BEFORE rpc:make-server")
                             )
			   "rpc:server"))
			   ;; (cute (rpc:make-server rpc:listener) "rpc:server")
			   ;; 'rpc:server))
	 (hostname        (if (string=? "-" hostn)


         (hostname        (if (string=? "-" hostn)
			      (get-host-name) 
			      hostn))
	 (ipaddrstr       (if (string=? "-" hostn)
			      (server:get-best-guess-address hostname) ;; (string-intersperse (map number->string (u8vector->list (hostname->ip hostname))) ".")
                              (string-intersperse 
                               (map number->string
                                    (u8vector->list
                                      (hostname->ip hostn))) ".")
			      #f))
	 (portnum         (rpc:default-server-port))
	 (host:port       (conc (if ipaddrstr ipaddrstr hostname) ":" portnum))
	 (tdb             (tasks:open-db)))
                              ))
	 (portnum         (let ((res (rpc:default-server-port)))  res))
	 (host:port       (conc (if ipaddrstr ipaddrstr hostname) ":" portnum)))

    (when (not (equal? ipaddrstr (server:get-best-guess-address (get-host-name))))
        
      (debug:print 0 *default-log-port* "Error: This host "(ip->string (hostname->ip (get-host-name)))" ("(get-host-name)") is not the homehost "ipaddrstr" ("(ip->hostname (string->ip ipaddrstr))"; Cannot proceed.")
      (server:dotserver-starting-remove)
      (tcp-close rpc:listener) ;; gotta exit nicely and free up that tcp port
      (exit))
    
    (tasks:server-set-interface-port (db:delay-if-busy (tasks:open-db)) server-id ipaddrstr portnum)

    ;;============================================================
    ;;  activate thread th1 to attach opened tcp port to rpc server
    ;;=============================================================
    (thread-start! th1)
    (set! db *dbstruct-db*)
    (open-run-close tasks:server-set-interface-port 

		    tasks:open-db 
		    server-id 
		    ipaddrstr portnum)
    (debug:print 0 *default-log-port* "Server started on " host:port)
    ;;(BB> "before SELF-TEST")
    (if (retry-thunk (lambda ()
                       (rpc-transport:self-test run-id ipaddrstr portnum))
                     final-failure-returns-actual: #t ;; TODO: remove this line
    
    ;; (trace rpc:publish-procedure!)
    ;; (rpc:publish-procedure! 'server:login server:login)
    ;; (rpc:publish-procedure! 'testing (lambda () "Just testing"))
                     )
        (debug:print 0 *default-log-port* "INFO: rpc self test passed!")
        (begin
          (debug:print 0 *default-log-port* "Error: rpc listener did not pass self test.  Shutting down.  On: " host:port)
          (tasks:server-set-state! (db:delay-if-busy (tasks:open-db)) server-id "dead")
          (tcp-close rpc:listener) ;; gotta exit nicely and free up that tcp port
          (rpc-transport:server-shutdown server-id rpc:listener)
          (server:dotserver-starting-remove)
          (exit)))




    ;;(on-exit (lambda ()
    ;;           (rpc-transport:server-shutdown server-id rpc:listener from-on-exit: #t)))
    ;;======================================================================
    ;;	  ;; end of publish-procedure section
    ;;======================================================================
    ;;
    (on-exit (lambda ()
	       (open-run-close tasks:server-set-state! tasks:open-db server-id "stopped")))

    (set! *rpc:listener* rpc:listener)
    
    ;; check again for running servers for this run-id in case one has snuck in since we checked last in rpc-transport:launch
    (if (not (equal? server-id (tasks:server-am-i-the-server? (db:delay-if-busy (tasks:open-db)) run-id)));; try to ensure no double registering of servers
        (begin ;; i am not the server, another server snuck in and beat this one to the punch
          (tcp-close rpc:listener) ;; gotta exit nicely and free up that tcp port
          (tasks:server-set-state! (db:delay-if-busy (tasks:open-db)) server-id "collision")
          (server:dotserver-starting-remove))

        (begin ;; i am the server
          ;; setup the in-memory db
          (set! *dbstruct-db*  (db:setup run-id))
          (db:get-db *dbstruct-db* run-id)

          ;; at this point, satisfied server has started
          ;; let's make it official
          (server:write-dotserver *toppath* (conc ipaddrstr ":" portnum))
          (mutex-lock! *heartbeat-mutex*)
          (set! *last-db-access* (current-seconds))
          (mutex-unlock! *heartbeat-mutex*)
          (set! *rpc:listener* rpc:listener) 
          (tasks:server-set-state! (db:delay-if-busy (tasks:open-db)) server-id "running") ;; update our mdb servers entry

          
          
          ;; this let loop will hold open this thread until we want the server to shut down.
          ;;   if no requests received within the last 20 seconds :
          ;;   database hasnt changed in ??
          ;;


          
          ;; keep-running loop: polls last-db-access to see if we have timed out.  keep running if not. 
          (let loop ((count          0)
                     (bad-sync-count 0))
            (BB> "keep running: count = "count)
            ;; Use this opportunity to sync the inmemdb to db

            (let ((start-time (current-milliseconds))
                  (sync-time  #f)
                  (rem-time   #f))

              ;; following is now done in common:watchdog, commenting out.  sync-time will now be 0; can live with that.
              ;; ;; inmemddb is a dbstruct
              ;; (condition-case
              ;;  (db:sync-touched *dbstruct-db* *run-id* force-sync: #t)
              ;;  ((sync-failed)(cond
              ;;                 ((> bad-sync-count 10) ;; time to give up
              ;;                  (rpc-transport:server-shutdown server-id rpc:listener))
              ;;                 (else ;; (> bad-sync-count 0)  ;; we've had a fail or two, delay and loop
              ;;                  (thread-sleep! 5)
              ;;                  (loop count (+ bad-sync-count 1)))))
              ;;  ((exn)
              ;;   (debug:print-error 0 *default-log-port* "error from sync code other than 'sync-failed. Attempting to gracefully shutdown the server ")
              ;;   (rpc-transport:server-shutdown server-id rpc:listener)))
              
              (set! sync-time  (- (current-milliseconds) start-time))
    (tasks:server-set-state! tdb server-id "running")
    (set! *dbstruct-db*  (db:setup run-id))
    ;; if none running or if > 20 seconds since 
              (set! rem-time (quotient (- 4000 sync-time) 1000))
              (debug:print 4 *default-log-port* "SYNC: time= " sync-time ", rem-time=" rem-time)
              
    ;; server last used then start shutdown
    (let loop ((count 0))
      (thread-sleep! 5) ;; no need to do this very often
      (let ((numrunning -1)) ;; (db:get-count-tests-running db)))
	(if (or (> numrunning 0)
		(> (+ *db-last-access* 60)(current-seconds)))
	    (begin
	      (debug:print-info 0 *default-log-port* "Server continuing, tests running: " numrunning ", seconds since last db access: " (- (current-seconds) *db-last-access*))
	      (loop (+ 1 count)))
	    (begin
	      (debug:print-info 0 *default-log-port* "Starting to shutdown the server side")
	      (open-run-close tasks:server-delete-record tasks:open-db server-id " rpc-transport:try-start-server stop")
	      (thread-sleep! 10)
	      (debug:print-info 0 *default-log-port* "Max cached queries was " *max-cache-size*)
	      (debug:print-info 0 *default-log-port* "Server shutdown complete. Exiting")
	      ))))))
              (if (and (<= rem-time 4)
                       (> rem-time 0))
                  (thread-sleep! rem-time)
                  (thread-sleep! 4))) ;; fallback for if the math is changed ...
            
            (if (< count 1) ;; 3x3 = 9 secs aprox
                (loop (+ count 1) bad-sync-count))

            ;; BB: don't see how this is possible with RPC
            ;; ;; Check that iface and port have not changed (can happen if server port collides)
            ;; (mutex-lock! *heartbeat-mutex*)
            ;; (set! sdat *server-info*)
            ;; (mutex-unlock! *heartbeat-mutex*)
            
            ;; (if (or (not (equal? sdat (list iface port)))
            ;;         (not server-id))
            ;;     (begin 
            ;;       (debug:print-info 0 *default-log-port* "interface changed, refreshing iface and port info")
            ;;       (set! iface (car sdat))
            ;;       (set! port  (cadr sdat))))
            
            ;; Transfer *last-db-access* to last-access to use in checking that we are still alive
            (mutex-lock! *heartbeat-mutex*)
            (set! last-access *last-db-access*)
            (mutex-unlock! *heartbeat-mutex*)
            
            ;; (debug:print 11 *default-log-port* "last-access=" last-access ", server-timeout=" server-timeout)
            ;;
            ;; no_traffic, no running tests, if server 0, no running servers
            ;;
            ;; (let ((wait-on-running (configf:lookup *configdat* "server" b"wait-on-running"))) ;; wait on running tasks (if not true then exit on time out)
            ;;
            (let* ((hrs-since-start  (/ (- (current-seconds) server-start-time) 3600))
                   (adjusted-timeout (if (> hrs-since-start 1)
                                         (- server-timeout (inexact->exact (round (* hrs-since-start 60))))  ;; subtract 60 seconds per hour
                                         server-timeout)))
              (if (common:low-noise-print 120 "server timeout")
                  (debug:print-info 0 *default-log-port* "Adjusted server timeout: " adjusted-timeout))
              (if (and *server-run*
                       (> (+ last-access server-timeout)
                          (current-seconds)))
                  (begin
                    (if (common:low-noise-print 120 "server continuing")
                        (debug:print-info 0 *default-log-port* "Server continuing, seconds since last db access: " (- (current-seconds) last-access)))
                    ;;
                    ;; Consider implementing some smarts here to re-insert the record or kill self is
                    ;; the db indicates so
                    ;;
                    (if (tasks:server-am-i-the-server? (db:delay-if-busy (tasks:open-db)) run-id)
                        (tasks:server-set-state! (db:delay-if-busy (tasks:open-db)) server-id "running"))
                    ;;
                    (loop 0 bad-sync-count))
                  (begin
                    ;;(BB> "SERVER SHUTDOWN CALLED!  last-access="last-access" current-seconds="(current-seconds)" server-timeout="server-timeout)
                    
                    (rpc-transport:server-shutdown server-id rpc:listener)))))
          ;; end new loop
          ))))


(define (rpc-transport:find-free-port-and-open port)
(define (rpc-transport:find-free-port-and-open port #!key )
  (handle-exceptions
   exn
	  (begin
   (begin
     (print "Failed to bind to port " (rpc:default-server-port) ", trying next port")
     (rpc-transport:find-free-port-and-open (+ port 1)))
     (rpc-transport:find-free-port-and-open (add1 port)))
   (rpc:default-server-port port)
   (set! *rpc-listener-port* port) ;; a bit paranoid about rpc:default-server-port parameter not changing across threads (as params are wont to do).  keeping this global in my back pocket in case this causes problems
   (set! *rpc-listener-port-bind-timestamp* (current-milliseconds)) ;; may want to test how long it has been since the last bind attempt happened...
   (tcp-read-timeout 240000)
   (tcp-buffer-size 0) ;; gotta do this because http-transport undoes it.
   (tcp-listen (rpc:default-server-port) 10000)))

   (tcp-listen (rpc:default-server-port) 10000)
   ))
  
(define (rpc-transport:ping run-id host port)
  (handle-exceptions
   exn
   (begin
     (print "SERVER_NOT_FOUND")
     (print "SERVER_NOT_FOUND exn="exn)
     (exit 1))
   (let ((login-res ((rpc:procedure 'server:login host port) *toppath*)))
     (if (and (list? login-res)
	      (car login-res))
     (if login-res
	 (begin
	   (print "LOGIN_OK")
	   (exit 0))
	 (begin
	   (print "LOGIN_FAILED")
	   (exit 1))))))

(define (rpc-transport:client-setup run-id #!key (remtries 10))
  (if *runremote*
      (begin
(define (rpc-transport:self-test run-id host port)
  (if (not host)
      (abort "host not set."))
	(debug:print-error 0 *default-log-port* "Attempt to connect to server but already connected")
	#f)
      (let* ((host-info (hash-table-ref/default *runremote* run-id #f))) ;; (open-run-close db:get-var #f "SERVER"))
	(if host-info
  (if (not port)
	    (let ((iface    (car host-info))
		  (port     (cadr host-info))
		  (ping-res ((rpc:procedure 'server:login host port) *toppath*)))
	      (if ping-res
		  (let ((server-dat (list iface port #f #f #f)))
      (abort "port not set."))
  (tcp-buffer-size 0) ;; gotta do this because http-transport undoes it.
  (let* ((testing-res ((rpc:procedure 'testing host port)))
         (login-res ((rpc:procedure 'server:login host port) *toppath*))
         (res (and login-res (equal? testing-res "Just testing"))))
    
		    (hash-table-set! *runremote* run-id server-dat)
		    server-dat)
		  (begin
    (if login-res
		    (server:try-running run-id)
		    (thread-sleep! 2)
		    (rpc-transport:client-setup run-id (- remtries 1)))))
 	    (let* ((server-db-info (open-run-close tasks:get-server tasks:open-db run-id)))
 	      (debug:print-info 0 *default-log-port* "client:setup server-dat=" server-dat ", remaining-tries=" remaining-tries)
	      (if server-db-info
 		  (let* ((iface     (tasks:hostinfo-get-interface server-db-info))
 			 (port      (tasks:hostinfo-get-port      server-db-info))
			 (server-dat (list iface port #f #f #f))
 			 (ping-res  ((rpc:procedure 'server:login host port) *toppath*)))
 		    (if start-res
 			(begin
        (begin
 			  (hash-table-set! *runremote* run-id server-dat)
			  server-dat)
			(begin
			  (server:try-running run-id)
			  (thread-sleep! 2)
			  (rpc-transport:client-setup run-id (- remtries 1)))))
		  (begin
          ;;(BB> "Self test PASS.  login-res="login-res" testing-res="testing-res" *toppath*="*toppath*)
          #t)
        (begin
          (BB> "Self test fail.  login-res="login-res" testing-res="testing-res" *toppath*="*toppath*)
           
          #f))
    res))

(define (rpc-transport:client-setup run-id server-dat #!key (remaining-tries 10))
  ;;(BB> "entered rpc-transport:client-setup with run-id="run-id" and server-dat="server-dat" and retries="remaining-tries)
		    (server:try-running run-id)
		    (thread-sleep! 2)
		    (rpc-transport:client-setup run-id (- remtries 1)))))))))
  (tcp-buffer-size 0)
  (debug:print-info 0 *default-log-port* "rpc-transport:client-setup run-id="run-id" server-dat=" server-dat ", remaining-tries=" remaining-tries)
;; 
;; 	     (port     (if (and hostinfo (> (length hostdat) 1))(cadr hostdat) #f)))
;; 	(if (and port
;; 		 (string->number port))
;; 	    (let ((portn (string->number port)))
;; 	      (debug:print-info 2 *default-log-port* "Setting up to connect to host " host ":" port)
;; 	      (handle-exceptions
;; 	       exn
;; 	       (begin
  (let* ((iface     (tasks:hostinfo-get-interface server-dat))
         (hostname  (tasks:hostinfo-get-hostname  server-dat))
         (port      (tasks:hostinfo-get-port      server-dat))
;; 		 (debug:print-error 0 *default-log-port* "Failed to open a connection to the server at host: " host " port: " port)
;; 		 (debug:print 0 *default-log-port* "   EXCEPTION: " ((condition-property-accessor 'exn 'message) exn))
;; 		 ;; (open-run-close 
;; 		 ;;  (lambda (db . param) 
         (runremote-server-dat (vector iface port #f #f #f (current-seconds) 'rpc)) ;; http version := (vector iface port api-uri api-url api-req (current-seconds) 'http  )
         (ping-res (retry-thunk (lambda ()  ;; make 3 attempts to ping.
;; 		 ;;    (sqlite3:execute db "DELETE FROM metadat WHERE var='SERVER'"))
;; 		 ;;  #f)
;; 		 (set! *runremote* #f))
;; 	       (if (and (not (args:get-arg "-server")) ;; no point in the server using the server using the server
;; 			((rpc:procedure 'server:login host portn) *toppath*))
;; 		   (begin
;; 		     (debug:print-info 2 *default-log-port* "Logged in and connected to " host ":" port)
;; 		     (set! *runremote* (vector host portn)))
;; 		   (begin
;; 		     (debug:print-info 2 *default-log-port* "Failed to login or connect to " host ":" port)
;; 		     (set! *runremote* #f)))))
;; 	    (debug:print-info 2 *default-log-port* "no server available")))))

                                  ((rpc:procedure 'server:login iface port) *toppath*))
                                chatty: #f
                                retries: 3)))
    ;; we got here from rmt:get-connection-info on the condition that *runremote* has no entry for run-id...
    (if ping-res
        (begin
          (debug:print-info 0 *default-log-port* "rpc-transport:client-setup CONNECTION ESTABLISHED run-id="run-id" server-dat=" server-dat)
          runremote-server-dat)
        (begin ;; login failed but have a server record, clean out the record and try again
          (debug:print-info 0 *default-log-port* "rpc-transport:client-setup UNABLE TO CONNECT run-id="run-id" server-dat=" server-dat)
          (tasks:kill-server-run-id run-id)
          (tasks:server-force-clean-run-record  (db:delay-if-busy (tasks:open-db)) run-id iface port
                                                   " rpc-transport:client-setup (server-dat = #t)")
          (if (> remaining-tries 2)
              (thread-sleep! (+ 1 (random 5))) ;; spread out the starts a little
              (thread-sleep! (+ 15 (random 20)))) ;; it isn't going well. give it plenty of time
          (server:try-running run-id)
          (thread-sleep! 5)   ;; give server a little time to start up
          (client:setup run-id remaining-tries: (sub1 remaining-tries))))))

;; Call this to start the actual server
;;

;; all routes though here end in exit ...
;;
;; start_server
;;
(define (server:launch run-id transport-type)
  (BB> "server:launch fired for run-id="run-id" transport-type="transport-type)
  (case transport-type
    ((http)(http-transport:launch run-id))
    ;;((nmsg)(nmsg-transport:launch run-id))
    ((rpc)  (rpc-transport:launch run-id))
    (else (debug:print-error 0 *default-log-port* "unknown server type " transport-type))))
(define (server:launch run-id transport-type-raw)
  (let ((transport-type
         (cond
          ((string? transport-type-raw) (string->symbol transport-type-raw))
          (else transport-type-raw))))
         
    ;;(BB> "server:launch fired for run-id="run-id" transport-type="transport-type)

    (case transport-type
      ((http)(http-transport:launch run-id))
      ;;((nmsg)(nmsg-transport:launch run-id))
      ((rpc)  (rpc-transport:launch run-id))
      (else (debug:print-error 0 *default-log-port* "unknown server type " transport-type)))))
;;       (else   (debug:print-error 0 *default-log-port* "No known transport set, transport=" transport ", using rpc")
;; 	      (rpc-transport:launch run-id)))))

  
;;======================================================================
;; S E R V E R   U T I L I T I E S 
;;======================================================================

;; Get the transport
(define (server:get-transport)
  (if *transport-type*
      *transport-type*
      (let ((ttype (string->symbol
		    (or (args:get-arg "-transport")
			(configf:lookup *configdat* "server" "transport")
			"rpc"))))
			*DEFAULT-TRANSPORT*))))
	(set! *transport-type* ttype)
	ttype)))
	    
;; Generate a unique signature for this server
(define (server:mk-signature)
  (message-digest-string (md5-primitive) 
			 (with-output-to-string

	 (curr-ip     (server:get-best-guess-address curr-host))
	 (curr-pid    (current-process-id))
	 (homehost    (common:get-homehost)) ;; configf:lookup *configdat* "server" "homehost" ))
	 (target-host (car homehost))
	 (testsuite   (common:get-testsuite-name))
	 (logfile     (conc *toppath* "/logs/server.log"))
	 (cmdln (conc (common:get-megatest-exe)
		      " -server " (or target-host "-") " -run-id " 0 (if (equal? (configf:lookup *configdat* "server" "daemonize") "yes")
									      (conc " -daemonize -log " logfile)
									      "")
		      " -server " (or target-host "-") " -run-id " 0
                      (if (equal? (configf:lookup *configdat* "server" "daemonize") "yes")
                          (conc " -daemonize -log " logfile)
                          "")
                      " -transport " (server:get-transport)
		      " -m testsuite:" testsuite)) ;; (conc " >> " logfile " 2>&1 &")))))
	 (log-rotate  (make-thread common:rotate-logs  "server run, rotate logs thread")))
    ;; we want the remote server to start in *toppath* so push there
    (push-directory *toppath*)
    (debug:print 0 *default-log-port* "INFO: Trying to start server (" cmdln ") ...")
    (thread-start! log-rotate)

	      (file-read-access? dotfile))
	 (with-input-from-file
	     dotfile
	   (lambda ()
	     (read-line)))
	 #f))))


(define (server:dotserver-starting)
  (with-output-to-file
      (conc *toppath* "/.starting-server")
    (lambda ()
      (print (current-process-id) " on " (get-host-name)))))

(define (server:dotserver-starting-remove)
  (delete-file* (conc *toppath* "/.starting-server")))
  

  
;; write a .server file in *toppath* with hostport
;; return #t on success, #f otherwise
;;
(define (server:write-dotserver areapath hostport)
  (let ((lock-file   (conc areapath "/.server.lock"))
	(server-file (conc areapath "/.server")))
    (if (common:simple-file-lock lock-file)
	(let ((res (handle-exceptions
		    exn
		    #f ;; failed for some reason, for the moment simply return #f
		    (with-output-to-file server-file
		      (lambda ()
			(print hostport)))
		    #t)))
	  (debug:print-info 0 *default-log-port* "server file " server-file " for " hostport " created")
	  (common:simple-file-release-lock lock-file)
	  res)
	#f)))

(define (server:remove-dotserver-file areapath hostport)
(define (server:remove-dotserver-file areapath hostport #!key (force #f))
  (let ((dotserver   (server:read-dotserver areapath))
	(server-file (conc areapath "/.server"))
	(lock-file   (conc areapath "/.server.lock")))
    (if (and dotserver (string-match (conc ".*:" hostport "$") dotserver)) ;; port matches, good enough info to decide to remove the file
    (if (or force (and dotserver (string-match (conc ".*:" hostport "$") dotserver))) ;; port matches, good enough info to decide to remove the file
	(if (common:simple-file-lock lock-file)
	    (begin
	      (handle-exceptions
	       exn
	       #f
	       (delete-file* server-file))
	      (debug:print-info 0 *default-log-port* "server file " server-file " for " hostport " removed")
	      (common:simple-file-release-lock lock-file))))))

;; no longer care if multiple servers are started by accident. older servers will drop off in time.
;;
(define (server:check-if-running areapath)
  (let* ((dotserver (server:read-dotserver areapath))) ;; tdbdat (tasks:open-db)))
    (if dotserver
	(let* ((res (case *transport-type*
		      ((http)(server:ping-server dotserver))
		      ((http rpc)(server:ping-server dotserver))
		      ;; ((nmsg)(nmsg-transport:ping (tasks:hostinfo-get-interface server)
		      )))
	  (if res
	      dotserver
	      #f))
	#f)))

	  (begin
	    (if host-port-in
		(debug:print 0 *default-log-port*  "ERROR: bad host:port"))
	    (if do-exit (exit 1))
	    #f)
	  (let* ((iface      (car host-port))
		 (port       (cadr host-port))
		 (server-dat
                  (case (remote-transport *runremote*)
		 (server-dat (http-transport:client-connect iface port))
                    ((http) (http-transport:client-connect iface port))
                    ((rpc) (rpc-transport:client-connect iface port))
                    (else
                     (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport *runremote*) " not supported (4)")
                     (exit))))
		 (login-res  (rmt:login-no-auto-client-setup server-dat)))
	    (if (and (list? login-res)
		     (car login-res))
		(begin
		  (print "LOGIN_OK")
		  (if do-exit (exit 0)))
		(begin

(define (tasks:hostinfo-get-interface   vec)    (vector-ref  vec 1))
(define (tasks:hostinfo-get-port        vec)    (vector-ref  vec 2))
(define (tasks:hostinfo-get-pubport     vec)    (vector-ref  vec 3))
(define (tasks:hostinfo-get-transport   vec)    (vector-ref  vec 4))
(define (tasks:hostinfo-get-pid         vec)    (vector-ref  vec 5))
(define (tasks:hostinfo-get-hostname    vec)    (vector-ref  vec 6))

(define (tasks:server-lock-slot mdb run-id)
(define (tasks:server-lock-slot mdb run-id transport-type)
  (tasks:server-clean-out-old-records-for-run-id mdb run-id " tasks:server-lock-slot")
  (if (< (tasks:num-in-available-state mdb run-id) 4)
      (begin 
	(tasks:server-set-available mdb run-id)
	(tasks:server-set-available mdb run-id transport-type)
	(thread-sleep! (/ (random 1500) 1000)) ;; (thread-sleep! 2) ;; Try removing this. It may not be needed.
	(tasks:server-am-i-the-server? mdb run-id))
      #f))
	
;; register that this server may come online (first to register goes though with the process)
(define (tasks:server-set-available mdb run-id)
(define (tasks:server-set-available mdb run-id transport-type)
  (sqlite3:execute 
   mdb 
   "INSERT INTO servers (pid,hostname,port,pubport,start_time,      priority,state,mt_version,heartbeat,   interface,transport,run_id)
                   VALUES(?, ?,       ?,   ?, strftime('%s','now'), ?,       ?,    ?,-1,?,        ?,        ?);"
   (current-process-id)          ;; pid
   (get-host-name)               ;; hostname
   -1                            ;; port
   -1                            ;; pubport
   (random 1000)                 ;; priority (used a tiebreaker on get-available)
   "available"                   ;; state
   (common:version-signature)    ;; mt_version
   -1                            ;; interface
   ;; (conc (server:get-transport)) ;; transport
   (conc *transport-type*)    ;; transport
   (symbol->string transport-type)    ;; transport
   run-id
   ))

(define (tasks:num-in-available-state mdb run-id)
  (let ((res 0))
    (sqlite3:for-each-row
     (lambda (num-in-queue)

    (close-output-port oup)))
	  
	  
;; MUST BE CALLED local!
;;
(define (tests:test-get-paths-matching keynames target fnamepatt #!key (res '()))
  ;; BUG: Move the values derived from args to parameters and push to megatest.scm
  (let* ((testpatt   (if (args:get-arg "-testpatt")(args:get-arg "-testpatt") "%"))
	 (statepatt  (if (args:get-arg ":state")   (args:get-arg ":state")    "%"))
	 (statuspatt (if (args:get-arg ":status")  (args:get-arg ":status")   "%"))
	 (runname    (if (args:get-arg ":runname") (args:get-arg ":runname")  "%"))
  (let* ((testpatt   (or (args:get-arg "-testpatt")(args:get-arg "-testpatt") "%"))
	 (statepatt  (or (args:get-arg "-state")   (args:get-arg ":state")    "%"))
	 (statuspatt (or (args:get-arg "-status")  (args:get-arg ":status")   "%"))
	 (runname    (or (args:get-arg "-runname") (args:get-arg ":runname")  "%"))
	 (paths-from-db (rmt:test-get-paths-matching-keynames-target-new keynames target res
					testpatt
					statepatt
					statuspatt
					runname)))
    (if fnamepatt
	(apply append 
	       (map (lambda (p)
		      (if (directory-exists? p)
			  (glob (conc p "/" fnamepatt))
			  (let ((glob-query (conc p "/" fnamepatt)))
			    (handle-exceptions
				exn
				(with-input-from-pipe
				    (conc "echo " glob-query)
				  read-lines)  ;; we aren't going to try too hard. If glob breaks it is likely because someone tried to do */*/*.log or similar
			      (glob glob-query)))
			  '()))
		    paths-from-db))
	paths-from-db)))

			      
;;======================================================================
;; Gather data from test/task specifications

[server]

# force use of server always
# required yes

# Use http instead of direct filesystem access
transport rpc
transport http
# transport http
# transport fs
# transport nmsg

synchronous 0

# If the server can't be started on this port it will try the next port until
# it succeeds

(use srfi-18)


;; wrap a proc with a mutex so that two threads may not call proc simultaneously.
;; will catch exceptions to ensure mutex is unlocked even if exception is thrown.
;; will generate a unique mutex for proc unless one is specified with canned-mutex: option
;;
;; example 1: (define thread-safe-+ (make-synchronized-proc +))
;; example 2: (define thread-safe-plus
;;               (make-synchronized-proc
;;                  (lambda (x y)
;;                      (+ x y))))

(define (make-synchronized-proc proc
                                #!key (canned-mutex #f))
  (let* ((guard-mutex (if canned-mutex canned-mutex (make-mutex)))
         (guarded-proc ;; we are guarding the thunk against exceptions.  We will record whether result of evaluation is an exception or a regular result.
          (lambda args
            (mutex-lock! guard-mutex)
            (let* ((EXCEPTION (gensym)) ;; using gensym to avoid potential collision with a proc that returns a pair having the first element be our flag.  gensym guarantees the symbol is unique.
                   (res
                    (condition-case
                     (apply proc args) ;; this is what we are guarding the execution of
                     [x () (cons EXCEPTION x)]
                     )))
              (mutex-unlock! guard-mutex)
              (cond
               ((and (pair? res) (eq? (car res) EXCEPTION))
                (raise (cdr res)))
               (else
                res))))))
    guarded-proc))


;; retry an operation (depends on srfi-18)
;; ==================
;; idea here is to avoid spending time on coding retrying something.  Trying to be generic here.
;;
;; Exception handling:
;; -------------------
;; if evaluating the thunk results in exception, it will be retried.
;; on last try, if final-failure-returns-actual is true, the exception will be re-thrown to caller.
;;
;; look at options below #!key to see how to configure behavior
;;
;;

(define (retry-thunk
         the-thunk
         #!key ;;;; options below
         (accept-result?   (lambda (x) x)) ;; retry if predicate applied to thunk's result is false 
         (retries                       4) ;; how many tries
         (failure-value                #f) ;; return this on final failure, unless following option is enabled:
         (final-failure-returns-actual #f) ;; on failure, on the last try, just return the result, not failure-value

         (retry-delay                 0.1) ;; delay between tries
         (back-off-factor               1) ;; multiply retry-delay by this factor on retry
         (random-delay                0.1) ;; add a random portion of this value to wait

         (chatty                       #f) ;; print status as we go, for debugging.
         )
  
  (when chatty (print) (print "Entered retry-thunk") (print "-=-=-=-=-=-"))
  (let* ((guarded-thunk ;; we are guarding the thunk against exceptions.  We will record whether result of evaluation is an exception or a regular result.
          (lambda ()
           (let* ((EXCEPTION (gensym)) ;; using gensym to avoid potential collision
                  (res
                   (condition-case
                    (the-thunk) ;; this is what we are guarding the execution of
                    [x () (cons EXCEPTION x)]
                    )))
             (cond
              ((and (pair? res) (eq? (car res) EXCEPTION))
               (if chatty
                   (print " - the-thunk threw exception >"(cdr res)"<"))
               (cons 'exception (cdr res)))
               (else
                (if chatty
                    (print " - the-thunk returned result >"res"<"))
                (cons 'regular-result res)))))))
    
    (let loop ((guarded-res (guarded-thunk))
               (retries-left retries)
               (fail-wait retry-delay))
      (if chatty (print "   =========="))
      (let* ((wait-time (+ fail-wait (+ (* fail-wait back-off-factor)
                                        (* random-delay
                                           (/ (random 1024) 1024) ))))
             (res-type (car guarded-res))
             (res-value (cdr guarded-res)))
        (cond
         ((and (eq? res-type 'regular-result) (accept-result? res-value))
                   (if chatty (print " + return result that satisfied accept-result? >"res-value"<"))
                   res-value)

         ((> retries-left 0)
          (if chatty (print " - sleep "wait-time))
          (thread-sleep! wait-time)
          (if chatty (print " + retry ["retries-left" tries left]"))
          (loop (guarded-thunk)
                (sub1 retries-left)
                wait-time))
         
         ((eq? res-type 'regular-result)
          (if final-failure-returns-actual
              (begin
                (if chatty (print " + last try failed- return the result >"res-value"<"))
                res-value)
              (begin
                (if chatty (print " + last try failed- return canned failure value >"failure-value"<"))
              failure-value)))
         
         (else ;; no retries left; result was not accepted and res-type can only be 'exception
          (if final-failure-returns-actual 
              (begin
                (if chatty (print " + last try failed with exception- re-throw it >"res-value"<"))
                (abort res-value)); re-raise the exception. TODO: find a way for call-history to show as though from entry to this function
              (begin
                (if chatty (print " + last try failed with exception- return canned failure value >"failure-value"<"))
                failure-value))))))))

#  greater. See the accompanying file COPYING for details.
# 
#  This program is distributed WITHOUT ANY WARRANTY; without even the
#  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
#  PURPOSE.

echo You may need to do the following first:
echo sudo apt-get install libreadline-dev
echo sudo apt-get install libreadline-dev libsqlite3-dev libwebkitgtk-dev 
echo sudo apt-get install libwebkitgtk-dev 
echo sudo apt-get install libpangox-1.0-0 zlib1g-dev libfreetype6-dev cmake
echo sudo apt-get install libssl-dev
echo sudo apt-get install libssl-dev uuid-dev libglu1-mesa-dev
echo sudo apt-get install libmotif3 -OR- set KTYPE=26g4
echo
echo Set OPTION to std, currently OPTION=$OPTION
echo
echo Additionally, if you want mysql-client, you will need to make sure
echo mysql_config is in your path
echo
echo You are using PREFIX=$PREFIX
echo You are using proxy="$proxy"
echo 
echo "Set additional_libpath to help find gtk or other libraries, don't forget a leading :"

if [[ "$OPTION"x == "x" ]];then
  OPTION=std
fi

SYSTEM_TYPE=$(lsb_release -irs |tr ' ' '_' |tr '\n' '-')$(uname -i)-$OPTION

# default chicken version variables. Override in case statement as appropriate
CHICKEN_VERSION=4.10.0
CHICKEN_BASEVER=4.10.0

# Set up variables
#
case $SYSTEM_TYPE in
Ubuntu-16.04-x86_64-std)
	KTYPE=32
	CDVER=5.10
	IUPVER=3.17
	IMVER=3.11
	;;
Ubuntu-16.04-x86_64-new)
	KTYPE=32
	CDVER=5.10
	IUPVER=3.17
	IMVER=3.11
	CHICKEN_VERSION=4.10.0
	CHICKEN_BASEVER=4.10.0
	;;
Ubuntu-16.04-i686-std)
	KTYPE=32
	CDVER=5.10
	IUPVER=3.17
	IMVER=3.11
	;;

  echo Using KTYPE=$KTYPE
fi

# Put all the downloaded tar files in tgz
mkdir -p tgz

# http://code.call-cc.org/releases/4.8.0/chicken-4.8.0.5.tar.gz
export CHICKEN_VERSION=4.11.0
export CHICKEN_BASEVER=4.11.0
chicken_targz=chicken-${CHICKEN_VERSION}.tar.gz
if ! [[ -e tgz/$chicken_targz ]]; then 
    wget http://code.call-cc.org/releases/${CHICKEN_BASEVER}/${chicken_targz}
    mv $chicken_targz tgz
fi 

BUILDHOME=$PWD

	fi
fi
cd $BUILDHOME

# Some eggs are quoted since they are reserved to Bash
# for f in matchable readline apropos base64 regex-literals format "regex-case" "test" coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo tcp rpc csv-xml fmt json md5; do
# $CHICKEN_INSTALL $PROX -keep-installed matchable readline apropos base64 regex-literals format "regex-case" "test" coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo tcp rpc csv-xml fmt json md5 awful http-client spiffy uri-common intarweb http-client spiffy-request-vars md5 message-digest http-client spiffy-directory-listing
for egg in matchable readline apropos base64 regex-literals format "regex-case" "test" \
for egg in matchable readline apropos dbi base64 regex-literals format "regex-case" "test" \
	coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo \
	tcp rpc csv-xml fmt json md5 awful http-client spiffy uri-common intarweb http-client \
	spiffy-request-vars s md5 message-digest spiffy-directory-listing ssax sxml-serializer \
	sxml-modifications logpro z3 call-with-environment-variables \
	pathname-expand typed-records simple-exceptions numbers crypt parley srfi-42 \
	alist-lib ansi-escape-sequences args basic-sequences bindings chicken-doc chicken-doc-cmd \
	cock condition-utils debug define-record-and-printer easyffi easyffi-base \

	cd opensrc
	#fossil open ../opensrc.fossil
	cd histstore
	$PREFIX/bin/csc histstore.scm -o hs 
	cp -f hs $PREFIX/bin/hs 
	cd ../mutils
	$PREFIX/bin/chicken-install
	cd ../dbi 
	$PREFIX/bin/chicken-install
	# cd ../dbi 
	# $PREFIX/bin/chicken-install
	cd ../margs
	$PREFIX/bin/chicken-install
fi
cd $BUILDHOME

if ! [[ -e $PREFIX/bin/stmlrun ]] ; then
	#fossil clone http://www.kiatoa.com/fossils/stml stml.fossil