Megatest

;; global gletches
(define *configinfo* #f)
(define *configdat*  #f)
(define *toppath*    #f)
(define *already-seen-runconfig-info* #f)
(define *waiting-queue* (make-hash-table))
(define *test-meta-updated* (make-hash-table))
(define *globalexitstatus* 0) ;; attempt to work around possible thread issues
(define *passnum*     0) ;; when running track calls to run-tests or similar
(define *verbosity*   1)
(define *rpc:listener* #f) ;; if set up for server communication this will hold the tcp port
(define *runremote*    #f) ;; if set up for server communication this will hold <host port>
(define *last-db-access* 0) ;; update when db is accessed via server

(define (get-with-default val default)
  (let ((val (args:get-arg val)))
    (if val val default)))

(define (assoc/default key lst . default)
  (let ((res (assoc key lst)))

    (begin
      (print "Failed to find megatest.config, exiting") 
      (exit 1)))

(define *db* (open-db))

;; HACK ALERT: this is a hack, please fix.
(define *read-only* (file-read-access? (conc *toppath* "/megatest.db")))
(define *read-only* (not (file-read-access? (conc *toppath* "/megatest.db"))))
;; (server:client-setup *db*)

(define toplevel #f)
(define dlg      #f)
(define max-test-num 0)
(define *keys*   (rdb:get-keys  *db*))
;; (define *keys*   (db:get-keys   *db*))

(define *incoming-mutex*     (make-mutex))
(define *cache-on* #f)

(define (open-db) ;;  (conc *toppath* "/megatest.db") (car *configinfo*)))
  (let* ((dbpath    (conc *toppath* "/megatest.db")) ;; fname)
	 (dbexists  (file-exists? dbpath))
	 (db        (sqlite3:open-database dbpath)) ;; (never-give-up-open-db dbpath))
	 (handler   (make-busy-timeout 36000)))
	 (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					   (string->number (args:get-arg "-override-timeout"))
					   36000)))) ;; 136000)))
    (sqlite3:set-busy-handler! db handler)
    (if (not dbexists)
	(db:initialize db))
    db))

(define (db:initialize db)
  (let* ((configdat (car *configinfo*))  ;; tut tut, global warning...

	                        value REAL,
	                        expected REAL,
	                        tol REAL,
                                units TEXT,
                                comment TEXT DEFAULT '',
                                status TEXT DEFAULT 'n/a',
                              CONSTRAINT test_data UNIQUE (test_id,category,variable));")
       (print "WARNING: Table test_data and test_meta where recreated. Please do megatest -update-meta")
       (print "WARNING: Table test_data and test_meta were recreated. Please do megatest -update-meta")
       (patch-db))
      ((< mver 1.27)
       (db:set-var db "MEGATEST_VERSION" 1.27)
       (sqlite3:execute db "ALTER TABLE test_data ADD COLUMN type TEXT DEFAULT '';")
       (patch-db))
      ((< mver 1.29)
       (db:set-var db "MEGATEST_VERSION" 1.29)

    (sqlite3:for-each-row (lambda (id)
			    (set! ids (cons id ids)))
			  db
			  "SELECT id FROM tests WHERE run_id=? AND testname=? AND item_path=?;"
			  run-id test-name (item-list->path itemdat))
    (for-each (lambda (id)
		(sqlite3:execute db "DELETE FROM test_steps WHERE test_id=?;" id)
		(thread-sleep! 0.1) ;; give others access to the db
                (sqlite3:execute db "DELETE FROM test_data WHERE test_id=?;" id)
		(thread-sleep! 0.1)) ;; give others access to the db
                (thread-sleep! 0.1)) ;; give others access to the db
	      ids)))
;;"DELETE FROM test_steps WHERE test_id in (SELECT id FROM tests WHERE run_id=? AND testname=? AND item_path=?);" 
		   
;; 
(define (db:delete-test-records db test-id)
  (sqlite3:execute db "DELETE FROM test_steps WHERE test_id=?;" test-id)
  (sqlite3:execute db "DELETE FROM test_data  WHERE test_id=?;" test-id)

       (set! res (vector id run-id testname state status event-time host cpuload diskfree uname rundir item-path run_duration final_logf comment)))
     db 
     "SELECT id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment FROM tests WHERE id=?;"
     test-id)
    res))


(define (db:test-set-comment db run-id test-name item-path comment)
(define (db:test-set-comment db test-id comment)
  (sqlite3:execute 
   db 
   "UPDATE tests SET comment=? WHERE run_id=? AND testname=? AND item_path=?;"
   comment run-id test-name item-path))
   "UPDATE tests SET comment=? WHERE id=?;"
   comment test-id))

;;
(define (db:test-set-rundir! db run-id test-name item-path rundir)
  (sqlite3:execute 
   db 
   "UPDATE tests SET rundir=? WHERE run_id=? AND testname=? AND item_path=?;"
   rundir run-id test-name item-path))

(define (db:test-set-log! db run-id test-name item-path logf)
  (sqlite3:execute db "UPDATE tests SET final_logf=? WHERE run_id=? AND testname=? AND item_path=?;" 
		   logf run-id test-name item-path))
(define (db:test-set-log! db test-id logf)
  (if (string? logf)
      (sqlite3:execute db "UPDATE tests SET final_logf=? WHERE id=?;"
		   logf test-id)
      (debug:print 0 "ERROR: db:test-set-log! called with non-string log file name " logf)))

;;======================================================================
;; Misc. test related queries
;;======================================================================

(define (db:test-get-paths-matching db keynames target)
  (let* ((res '())

		     ((meta-info)
		      (apply sqlite3:execute meta-stmt (vector-ref entry 2)))
		     ((step-status)
		      (apply sqlite3:execute step-stmt (vector-ref entry 2)))
		     (else
		      (debug:print 0 "ERROR: Queued entry not recognised " entry))))
		 data)))
    (sqlite3:finalize! meta-stmt) ;; sqlite is the bottleneck, clear the statements asap?
    (sqlite3:finalize! step-stmt)
    (set! *incoming-data* '())
    (mutex-unlock! *incoming-mutex*)
    (mutex-unlock! *incoming-mutex*)))
    (sqlite3:finalize! meta-stmt)
    (sqlite3:finalize! step-stmt)))

(define (db:roll-up-pass-fail-counts db run-id test-name item-path status)
  (if (and (not (equal? item-path ""))
	   (or (equal? status "PASS")
	       (equal? status "WARN")
	       (equal? status "FAIL")
	       (equal? status "WAIVED")
	       (equal? status "RUNNING")))
      (begin
	(sqlite3:execute 
	 db
	 "UPDATE tests 
             SET fail_count=(SELECT count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND status='FAIL'),
                 pass_count=(SELECT count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND (status='PASS' OR status='WARN' OR status='WAIVED'))
             WHERE run_id=? AND testname=? AND item_path='';"
	 run-id test-name run-id test-name run-id test-name)
        (thread-sleep! 0.1) ;; give other processes a chance here
	(if (equal? status "RUNNING") ;; running takes priority over all other states, force the test state to RUNNING
	    (sqlite3:execute db "UPDATE tests SET state=? WHERE run_id=? AND testname=? AND item_path='';" "RUNNING" run-id test-name)
	    (sqlite3:execute
	     db
	     "UPDATE tests
                       SET state=CASE WHEN (SELECT count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND state in ('RUNNING','NOT_STARTED')) > 0 THEN 
                          'RUNNING'
                       ELSE 'COMPLETED' END,
                          status=CASE WHEN fail_count > 0 THEN 'FAIL' WHEN pass_count > 0 AND fail_count=0 THEN 'PASS' ELSE 'UNKNOWN' END
                       WHERE run_id=? AND testname=? AND item_path='';"
	     run-id test-name run-id test-name)))))
	     run-id test-name run-id test-name))
	#f)
      #f))


;;======================================================================
;; Tests meta data
;;======================================================================

;; read the record given a testname

    (sqlite3:for-each-row 
     (lambda (id test_id category variable value expected tol units comment status type)
       (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
     db
     "SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
    (reverse res)))

(define (db:load-test-data db run-id test-name itemdat)
(define (db:load-test-data db test-id)
  (let* ((item-path (item-list->path itemdat))
	 (testdat (db:get-test-info db run-id test-name item-path))
	 (test-id (if testdat (db:test-get-id testdat) #f)))
    ;; (debug:print 1 "Enter records to insert in the test_data table, seven fields, comma separated per line")
    (debug:print 4 "itemdat: " itemdat ", test-name: " test-name ", test-id: " test-id)
    (if test-id
	(let loop ((lin (read-line)))
	  (if (not (eof-object? lin))
	      (begin
		(debug:print 4 lin)
		(db:csv->test-data db test-id lin)
		(loop (read-line))))))
    ;; roll up the current results.
    ;; FIXME: Add the status to 
    (db:test-data-rollup db test-id #f)))
  (let loop ((lin (read-line)))
    (if (not (eof-object? lin))
	(begin
	  (debug:print 4 lin)
	  (rdb:csv->test-data db test-id lin)
	  (loop (read-line)))))
  ;; roll up the current results.
  ;; FIXME: Add the status to 
  (rdb:test-data-rollup db test-id #f))

;; WARNING: Do NOT call this for the parent test on an iterated test
;; Roll up test_data pass/fail results
;; look at the test_data status field, 
;;    if all are pass (any case) and the test status is PASS or NULL or '' then set test status to PASS.
;;    if one or more are fail (any case) then set test status to PASS, non "pass" or "fail" are ignored
(define (db:test-data-rollup db test-id status)

	     (if (not (or parent-waiton-met item-waiton-met))
		 (set! result (cons waitontest-name result)))
	     ;; if the test is not found then clearly the waiton is not met...
	     (if (not ever-seen)(set! result (cons waitontest-name result)))))
	waitons)
      (delete-duplicates result))))

(define (db:teststep-set-status! db run-id test-name teststep-name state-in status-in item-path comment logfile)
  (debug:print 4 "run-id: " run-id " test-name: " test-name)
(define (db:teststep-set-status! db test-id teststep-name state-in status-in item-path comment logfile)
  (debug:print 4 "test-id: " test-id " teststep-name: " teststep-name)
  (let* ((state     (check-valid-items "state" state-in))
	 (status    (check-valid-items "status" status-in))
	 (status    (check-valid-items "status" status-in)))
	 (testdat   (db:get-test-info db run-id test-name item-path)))
    (debug:print 5 "testdat: " testdat)
    (if (and testdat ;; if the section exists then force specification BUG, I don't like how this works.
	     (or (not state)(not status)))
    (if (or (not state)(not status))
	(debug:print 0 "WARNING: Invalid " (if status "status" "state")
	       " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
    (if testdat
	(let ((test-id (test:get-id testdat)))
	  (mutex-lock! *incoming-mutex*)
	  (set! *incoming-data* (cons (vector 'step-status
					      (current-seconds)
					      ;; FIXME - this should not update the logfile unless it is specified.
					      (list test-id teststep-name state-in status-in (current-seconds) (if comment comment "") (if logfile logfile "")))
				      *incoming-data*))
	  (mutex-unlock! *incoming-mutex*)
	  (if (not *cache-on*)(db:write-cached-data db))
	  #t)
    (mutex-lock! *incoming-mutex*)
    (set! *incoming-data* (cons (vector 'step-status
					(current-seconds)
					;; FIXME - this should not update the logfile unless it is specified.
					(list test-id teststep-name state-in status-in (current-seconds) (if comment comment "") (if logfile logfile "")))
				*incoming-data*))
    (mutex-unlock! *incoming-mutex*)
    (if (not *cache-on*)(db:write-cached-data db))
    #t))
	(debug:print 0 "ERROR: Can't update " test-name " for run " run-id " -> no such test in db"))))

;;======================================================================
;; Extract ods file from the db
;;======================================================================

;; runspatt is a comma delimited list of run patterns
;; keypatt-alist must contain *all* keys with an associated pattern: '( ("KEY1" "%") .. )

  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'rdb:set-tests-state-status host port)
	 run-id testnames currstate currstatus newstate newstatus))
      (db:set-tests-state-status db run-id testnames currstate currstatus newstate newstatus)))

(define (rdb:teststep-set-status! db run-id test-name teststep-name state-in status-in itemdat comment logfile)
(define (rdb:teststep-set-status! db test-id teststep-name state-in status-in itemdat comment logfile)
  (let ((item-path (item-list->path itemdat)))
    (if *runremote*
	(let ((host (vector-ref *runremote* 0))
	      (port (vector-ref *runremote* 1)))
	  ((rpc:procedure 'rdb:teststep-set-status! host port)
	   run-id test-name teststep-name state-in status-in item-path comment logfile))
	(db:teststep-set-status! db run-id test-name teststep-name state-in status-in item-path comment logfile))))
	   test-id teststep-name state-in status-in item-path comment logfile))
	(db:teststep-set-status! db test-id teststep-name state-in status-in item-path comment logfile))))

(define (rdb:test-update-meta-info db run-id test-name itemdat minutes cpuload diskfree tmpfree)
  (let ((item-path (item-list->path itemdat)))
    (if *runremote*
	(let ((host (vector-ref *runremote* 0))
	      (port (vector-ref *runremote* 1)))
	  ((rpc:procedure 'rdb:test-update-meta-info host port)

  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'rdb:roll-up-pass-fail-counts host port)
	 run-id test-name item-path status))
      (db:roll-up-pass-fail-counts db run-id test-name item-path status)))

(define (rdb:test-set-comment db run-id test-name item-path comment)
(define (rdb:test-set-comment db test-id comment)
  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'rdb:test-set-comment host port)
	 run-id test-name item-path comment))
      (db:test-set-comment db run-id test-name item-path comment)))
	 test-id comment))
      (db:test-set-comment db test-id comment)))

(define (rdb:test-set-log! db run-id test-name item-path logf)
(define (rdb:test-set-log! db test-id logf)
  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'rdb:test-set-log! host port)
	((rpc:procedure 'rdb:test-set-log! host port) test-id logf))
	 run-id test-name item-path logf))
      (db:test-set-log! db run-id test-name item-path logf)))
      (db:test-set-log! db test-id logf)))

(define (rdb:get-runs db runnamepatt numruns startrunoffset keypatts)
  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'rdb:get-runs host port)
	 runnamepatt numruns startrunoffset keypatts))

(define (rdb:delete-test-records db test-id)
  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'rdb:delete-test-records host port) test-id))
      (db:delete-test-records db test-id)))

(define (rdb:test-data-rollup db test-id status)
    (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'rdb:test-data-rollup host port) test-id status))
      (db:test-data-rollup db test-id status)))

(define (steprun-good? logpro exitcode)
  (or (eq? exitcode 0)
      (and logpro (eq? exitcode 2))))

(define (launch:execute encoded-cmd)
  (let* ((cmdinfo   (read (open-input-string (base64:base64-decode encoded-cmd)))))
    (setenv "MT_CMDINFO" encoded-cmd)
    (if (list? cmdinfo) ;; ((testpath /tmp/mrwellan/jazzmind/src/example_run/tests/sqlitespeed) (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
    (if (list? cmdinfo) ;; ((testpath /tmp/mrwellan/jazzmind/src/example_run/tests/sqlitespeed)
                        ;; (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
	(let* ((testpath  (assoc/default 'testpath  cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (ezsteps   (assoc/default 'ezsteps   cmdinfo))
	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (env-ovrd  (assoc/default 'env-ovrd  cmdinfo))
	       (set-vars  (assoc/default 'set-vars  cmdinfo)) ;; pre-overrides from -setvar
	       (runname   (assoc/default 'runname   cmdinfo))
	       (megatest  (assoc/default 'megatest  cmdinfo))
	       (mt-bindir-path (assoc/default 'mt-bindir-path cmdinfo))
	       (fullrunscript (if runscript (conc testpath "/" runscript) #f))

	  (set-run-config-vars db run-id)
	  ;; environment overrides are done *before* the remaining critical envars.
	  (alist->env-vars env-ovrd)
	  (set-megatest-env-vars db run-id)
	  (set-item-env-vars itemdat)
	  (save-environment-as-files "megatest")
	  (test-set-meta-info db run-id test-name itemdat)
	  (test-set-status! db run-id test-name "REMOTEHOSTSTART" "n/a" itemdat (args:get-arg "-m") #f)
	  (test-set-status! db test-id "REMOTEHOSTSTART" "n/a" (args:get-arg "-m") #f)
	  (if (args:get-arg "-xterm")
	      (set! fullrunscript "xterm")
	      (if (and fullrunscript (not (file-execute-access? fullrunscript)))
		  (system (conc "chmod ug+x " fullrunscript))))
	  ;; We are about to actually kick off the test
	  ;; so this is a good place to remove the records for 
	  ;; any previous runs

						   ;;       (set! script (conc script "source " prev-env))))
						   
						   ;; call the command using mt_ezstep
						   (set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "-") " " stepcmd))

						   (debug:print 4 "script: " script)

						   (rdb:teststep-set-status! db run-id test-name stepname "start" "-" itemdat #f #f)
						   (rdb:teststep-set-status! db test-id stepname "start" "-" itemdat #f #f)
						   ;; now launch
						   (let ((pid (process-run script)))
						     (let processloop ((i 0))
						       (let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
								   (mutex-lock! m)
								   (vector-set! exit-info 0 pid)
								   (vector-set! exit-info 1 exit-status)
								   (vector-set! exit-info 2 exit-code)
								   (mutex-unlock! m)
								   (if (eq? pid-val 0)
								       (begin
									 (thread-sleep! 2)
									 (processloop (+ i 1))))
								   ))
                                                     (let ((exinfo (vector-ref exit-info 2))
						     (rdb:teststep-set-status! db run-id test-name stepname "end" (vector-ref exit-info 2) itemdat #f (if logpro-used (conc stepname ".html") ""))
                                                           (logfna (if logpro-used (conc stepname ".html") "")))
                                                        ;; testing if procedures called in a remote call cause problems (ans: no or so I suspect)
						        (rdb:teststep-set-status! db test-id stepname "end" exinfo itemdat #f logfna))
						     (if logpro-used
							 (test-set-log! db run-id test-name itemdat (conc stepname ".html")))
							 (rdb:test-set-log! db test-id (conc stepname ".html")))
						     ;; set the test final status
						     (let* ((this-step-status (cond
									       ((and (eq? (vector-ref exit-info 2) 2) logpro-used) 'warn)
									       ((eq? (vector-ref exit-info 2) 0)                   'pass)
									       (else 'fail)))
							    (overall-status   (cond
									       ((eq? rollup-status 2) 'warn)

						       (debug:print 4 "Exit value received: " (vector-ref exit-info 2) " logpro-used: " logpro-used 
								    " this-step-status: " this-step-status " overall-status: " overall-status 
								    " next-status: " next-status " rollup-status: " rollup-status)
						       (case next-status
							 ((warn)
							  (set! rollup-status 2)
							  ;; NB// test-set-status! does rdb calls under the hood
							  (test-set-status! db run-id test-name "RUNNING" "WARN" itemdat 
							  (test-set-status! db test-id "RUNNING" "WARN" 
									    (if (eq? this-step-status 'warn) "Logpro warning found" #f)
									    #f))
							 ((pass)
							  (test-set-status! db run-id test-name "RUNNING" "PASS" itemdat #f #f))
							  (test-set-status! db test-id "RUNNING" "PASS" #f #f))
							 (else ;; 'fail
							  (set! rollup-status 1) ;; force fail
							  (test-set-status! db run-id test-name "RUNNING" "FAIL" itemdat (conc "Failed at step " stepname) #f)
							  (test-set-status! db test-id "RUNNING" "FAIL" (conc "Failed at step " stepname) #f)
							  ))))
						   (if (and (steprun-good? logpro-used (vector-ref exit-info 2))
							    (not (null? tal)))
						       (loop (car tal) (cdr tal) stepname)))
					     (debug:print 4 "WARNING: a prior step failed, stopping at " ezstep))))))))
		 (monitorjob   (lambda ()
				 (let* ((start-seconds (current-seconds))

								(begin
								  (debug:print 0 "Killing " (cadr parts) "; kill -9  " p-id)
								  (system (conc "kill -9 " p-id))))))
							(car processes))
						       (system (conc "kill -9 " pid))))
						   (begin
						     (debug:print 0 "WARNING: Request received to kill job but problem with process, attempting to kill manager process")
						     (test-set-status! db run-id test-name "KILLED"  "FAIL"
								       itemdat (args:get-arg "-m") #f)
						     (test-set-status! db test-id "KILLED"  "FAIL"
								       (args:get-arg "-m") #f)
						     (sqlite3:finalize! db)
						     (exit 1))))
					     (set! kill-tries (+ 1 kill-tries))
					     (mutex-unlock! m)))
				       (sqlite3:finalize! db)
				       (thread-sleep! (+ 10 (random 10))) ;; add some jitter to the call home time to spread out the db accesses
				       (loop (calc-minutes)))))))
		 (th1          (make-thread monitorjob))
		 (th2          (make-thread runit)))
	    (set! job-thread th2)
	    (thread-start! th1)
	    (thread-start! th2)
	    (thread-join! th2)
	    (mutex-lock! m)
	    (set! db (open-db))
	    (if (not (args:get-arg "-server"))
		(server:client-setup db))
	    (let* ((item-path (item-list->path itemdat))
		   (testinfo  (db:get-test-info db run-id test-name item-path)))
		   (testinfo  (rdb:get-test-info db run-id test-name item-path)))
	      (if (not (equal? (db:test-get-state testinfo) "COMPLETED"))
		  (begin
		    (debug:print 2 "Test NOT logged as COMPLETED, (state=" (db:test-get-state testinfo) "), updating result, rollup-status is " rollup-status)
		    (test-set-status! db run-id test-name
		    (test-set-status! db test-id 
				      (if kill-job? "KILLED" "COMPLETED")
				      ;; Old logic:
				      ;; (if (vector-ref exit-info 1) ;; look at the exit-status, #t means it at least ran
				      ;;     (if (and (not kill-job?) 
				      ;;         (eq? (vector-ref exit-info 2) 0)) ;; we can now use rollup-status instead
				      ;;         "PASS"
				      ;;         "FAIL")
				      ;;     "FAIL") 
				      ;; New logic based on rollup-status
				      (cond
				       ((not (vector-ref exit-info 1)) "FAIL") ;; job failed to run
				       ((eq? rollup-status 0)
					;; if the current status is AUTO the defer to the calculated value (i.e. leave this AUTO)
					(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO" "PASS"))
				       ((eq? rollup-status 1) "FAIL")
				       ((eq? rollup-status 2)
					;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
					(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
				       (else "FAIL"))
				      itemdat (args:get-arg "-m") #f)))
				      (args:get-arg "-m") #f)))
	      ;; for automated creation of the rollup html file this is a good place...
	      (if (not (equal? item-path ""))
		  (tests:summarize-items db run-id test-name #f)) ;; don't force - just update if no
	      )
	    (mutex-unlock! m)
	    ;; (exec-results (cmd-run->list fullrunscript)) ;;  (list ">" (conc test-name "-run.log"))))
	    ;; (success      exec-results)) ;; (eq? (cadr exec-results) 0)))

;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch
;;      (launch-test db (cadr status) test-conf))
(define (launch-test db run-id runname test-conf keyvallst test-name test-path itemdat params)
  (change-directory *toppath*)
  (let ((useshell   (config-lookup *configdat* "jobtools"     "useshell"))
  (let* ((useshell   (config-lookup *configdat* "jobtools"     "useshell"))
	(launcher   (config-lookup *configdat* "jobtools"     "launcher"))
	(runscript  (config-lookup test-conf   "setup"        "runscript"))
	(ezsteps    (> (length (hash-table-ref/default test-conf "ezsteps" '())) 0)) ;; don't send all the steps, could be big
	(diskspace  (config-lookup test-conf   "requirements" "diskspace"))
	(memory     (config-lookup test-conf   "requirements" "memory"))
	(hosts      (config-lookup *configdat* "jobtools"     "workhosts"))
	(remote-megatest (config-lookup *configdat* "setup" "executable"))
	;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to 
	;;                allow running from dashboard 
	;;                allow running from dashboard. Extract the path
        ;;                from the called megatest and convert dashboard
  	;;             	  or dboard to megatest
	(local-megatest  (let* ((lm  (car (argv)))
				(dir (pathname-directory lm))
				(exe (pathname-strip-directory lm)))
			   (conc (if dir (conc dir "/") "")
				 (case (string->symbol exe)
				   ((dboard) "megatest")
				   ((dashboard) "megatest")
				   (else exe)))))
	(test-sig   (conc "=" test-name ":" (item-list->path itemdat) "=")) ;; test-path is the full path including the item-path
	(test-sig   (conc test-name ":" (item-list->path itemdat))) ;; test-path is the full path including the item-path
	(work-area  #f)
	(toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all
	(diskpath   #f)
	(cmdparms   #f)
	(fullcmd    #f) ;; (define a (with-output-to-string (lambda ()(write x))))
	(mt-bindir-path #f))
    (if hosts (set! hosts (string-split hosts)))
	(mt-bindir-path #f)
	(item-path (item-list->path itemdat))
	(testinfo   (rdb:get-test-info db run-id test-name item-path))
	(test-id    (db:test-get-id testinfo)))
  (if hosts (set! hosts (string-split hosts)))
    ;; set the megatest to be called on the remote host
    (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
    (set! mt-bindir-path (pathname-directory remote-megatest))
    (if launcher (set! launcher (string-split launcher)))
    ;; set up the run work area for this test
    (set! diskpath (get-best-disk *configdat*))
    (if diskpath
	(let ((dat  (create-work-area db run-id test-path diskpath test-name itemdat)))
	  (set! work-area (car dat))
	  (set! toptest-work-area (cadr dat)))
	(begin
	  (set! work-area (conc test-path "/tmp_run"))
	  (create-directory work-area #t)
	  (debug:print 0 "WARNING: No disk work area specified - running in the test directory under tmp_run")))
    (set! cmdparms (base64:base64-encode (with-output-to-string
				    (lambda () ;; (list 'hosts     hosts)
				      (write (list (list 'testpath  test-path)
						   (list 'work-area work-area)
						   (list 'test-name test-name) 
						   (list 'runscript runscript) 
						   (list 'run-id    run-id   )
						   (list 'test-id   test-id  )
						   (list 'itemdat   itemdat  )
						   (list 'megatest  remote-megatest)
						   (list 'ezsteps   ezsteps) 
 						   (list 'env-ovrd  (hash-table-ref/default *configdat* "env-override" '())) 
						   (list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
						   (list 'runname   runname)
						   (list 'mt-bindir-path mt-bindir-path))))))) ;; (string-intersperse keyvallst " "))))
    ;; clean out step records from previous run if they exist
    (db:delete-test-step-records db run-id test-name itemdat)
    (change-directory work-area) ;; so that log files from the launch process don't clutter the test dir
    (cond
     ((and launcher hosts) ;; must be using ssh hostname
      (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
     (launcher
      (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms))))
     (else
      (if (not useshell)(debug:print 0 "WARNING: internal launching will not work well without \"useshell yes\" in your [jobtools] section"))
      (set! fullcmd (list remote-megatest test-sig "-execute" cmdparms (if useshell "&" "")))))
    (if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm"))))
    (debug:print 1 "Launching megatest for test " test-name " in " work-area" ...")
    (test-set-status! db run-id test-name "LAUNCHED" "n/a" itemdat #f #f) ;; (if launch-results launch-results "FAILED"))
    (test-set-status! db test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
    ;; set 
    ;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done
    (debug:print 4 "fullcmd: " fullcmd)
    (let* ((commonprevvals (alist->env-vars
			    (hash-table-ref/default *configdat* "env-override" '())))
	   (testprevvals   (alist->env-vars
			    (hash-table-ref/default test-conf "pre-launch-env-overrides" '())))
	   (miscprevvals   (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
			    (append (list (list "MT_TEST_NAME" test-name)
					  (list "MT_ITEM_INFO" (conc itemdat)) 
					  (list "MT_RUNNAME"   runname))
				    itemdat)))
	   (launch-results (apply cmd-run-proc-each-line
				  (if useshell
				      (string-intersperse fullcmd " ")
				      (car fullcmd))
				  print
				  (if useshell
				      '()
				      (cdr fullcmd))))) ;;  launcher fullcmd)));; (apply cmd-run-proc-each-line launcher print fullcmd))) ;; (cmd-run->list fullcmd))
      (debug:print 2 "Launching completed, updating db")
      (debug:print 4 "Launch results: " launch-results)
      (debug:print 2 "Launch results: " launch-results)
      (if (not launch-results)
	  (begin
	    (print "ERROR: Failed to run " (string-intersperse fullcmd " ") ", exiting now")
	    (sqlite3:finalize! db)
	    ;; good ole "exit" seems not to work
	    ;; (_exit 9)
	    ;; but this hack will work! Thanks go to Alan Post of the Chicken email list

;; Copyright 2006-2011, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.

;; (include "common.scm")
;; (include "megatest-version.scm")

(use sqlite3 srfi-1 posix regex regex-case srfi-69 base64 format readline apropos)
(use sqlite3 srfi-1 posix regex regex-case srfi-69 base64 format readline apropos) ;; (srfi 18) extras)
(import (prefix sqlite3 sqlite3:))
(import (prefix base64 base64:))

(declare (uses common))
(declare (uses megatest-version))
(declare (uses margs))
(declare (uses runs))
(declare (uses launch))
(declare (uses server))
(declare (uses tests))

(define *db* #f) ;; this is only for the repl, do not use in general!!!!

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")

			;; misc
			"-server"
			"-extract-ods"
			"-pathmod"
			"-env2file"
			"-setvars"
			"-debug" ;; for *verbosity* > 2
			"-override-timeout"
			) 
		 (list  "-h"
		        "-force"
		        "-xterm"
		        "-showkeys"
		        "-test-status"
			"-set-values"

;; Start the server - can be done in conjunction with -runall or -runtests (one day...)
;;======================================================================
(if (and (args:get-arg "-server")
	 (not (or (args:get-arg "-runall")
		  (args:get-arg "-runtests"))))
    (let* ((toppath (setup-for-run))
	   (db      (if toppath (open-db) #f)))
      (debug:print 0 "INFO: Starting the standalone server")
      (if db 
	  (let* ((host:port (db:get-var db "SERVER")) ;; this doen't support multiple servers BUG!!!!
	  (server:start db (args:get-arg "-server"))
		 (th2 (server:start db (args:get-arg "-server")))
		 (th3 (make-thread (lambda ()
				      (server:keep-running db)))))
	    (thread-start! th3)
	    (thread-join! th3))
	  (debug:print 0 "ERROR: Failed to setup for megatest"))))

;;======================================================================
;; full run
;;======================================================================

;; get lock in db for full run for this directory

		(exit 1)))
	  (set! db (open-db))    
	  (if (not (args:get-arg "-server"))
	      (server:client-setup db))
	  (let* ((itempatt (args:get-arg "-itempatt"))
		 (keys     (rdb:get-keys db))
		 (keynames (map key:get-fieldname keys))
		 (paths    (db:test-get-paths-matching db keynames target)))
		 (paths    (rdb:test-get-paths-matching db keynames target)))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(print path))
		      paths)))
	;; else do a general-run-call
	(general-run-call 
	 "-test-paths"
	 "Get paths to tests"
	 (lambda (db target runname keys keynames keyvallst)
	   (let* ((itempatt (args:get-arg "-itempatt"))
		  (paths    (db:test-get-paths-matching db keynames target)))
		  (paths    (rdb:test-get-paths-matching db keynames target)))
	     (for-each (lambda (path)
			 (print path))
		       paths))))))

;;======================================================================
;; Archive tests
;;======================================================================

	(let* ((step      (args:get-arg "-step"))
	       (cmdinfo   (read (open-input-string (base64:base64-decode (getenv "MT_CMDINFO")))))
	       (testpath  (assoc/default 'testpath  cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (db        #f)
	       (state    (args:get-arg ":state"))
	       (status   (args:get-arg ":status"))
	       (logfile  (args:get-arg "-setlog")))
	  (change-directory testpath)
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, exiting")
		(exit 1)))
	  (set! db (open-db))
	  (if (not (args:get-arg "-server"))
	      (server:client-setup db))
	  (if (and state status)
	      (rdb:teststep-set-status! db run-id test-name step state status itemdat (args:get-arg "-m") logfile)
	      (rdb:teststep-set-status! db test-id step state status itemdat (args:get-arg "-m") logfile)
	      (begin
		(debug:print 0 "ERROR: You must specify :state and :status with every call to -step")
		(exit 6)))
	  (sqlite3:finalize! db)
	  (set! *didsomething* #t))))

(if (or (args:get-arg "-setlog")       ;; since setting up is so costly lets piggyback on -test-status

	(let* ((startingdir (current-directory))
	       (cmdinfo   (read (open-input-string (base64:base64-decode (getenv "MT_CMDINFO")))))
	       (testpath  (assoc/default 'testpath  cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (db        #f)
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status")))
	  (change-directory testpath)
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, exiting")
		(exit 1)))
	  (set! db (open-db))
	  (if (not (args:get-arg "-server"))
	      (server:client-setup db))
	  (if (args:get-arg "-load-test-data")
	      ;; has sub commands that are rdb:
	      (db:load-test-data db run-id test-name itemdat))
	      (db:load-test-data db test-id))
	  (if (args:get-arg "-setlog")
	      (test-set-log! db run-id test-name itemdat (args:get-arg "-setlog")))
	      (rtests:test-set-log! db test-id (args:get-arg "-setlog")))
	  (if (args:get-arg "-set-toplog")
	      (test-set-toplog! db run-id test-name (args:get-arg "-set-toplog")))
	      (rtests:test-set-toplog! db run-id test-name (args:get-arg "-set-toplog")))
	  (if (args:get-arg "-summarize-items")
	      (tests:summarize-items db run-id test-name #t)) ;; do force here
	      (rdb:tests:summarize-items db run-id test-name #t)) ;; do force here
	  (if (args:get-arg "-runstep")
	      (if (null? remargs)
		  (begin
		    (debug:print 0 "ERROR: nothing specified to run!")
		    (sqlite3:finalize! db)
		    (exit 6))
		  (let* ((stepname   (args:get-arg "-runstep"))
			 (logprofile (args:get-arg "-logpro"))
			 (logfile    (conc stepname ".log"))
			 (cmd        (if (null? remargs) #f (car remargs)))
			 (params     (if cmd (cdr remargs) '()))
			 (exitstat   #f)
			 (shell      (last (string-split (get-environment-variable "SHELL") "/")))
			 (redir      (case (string->symbol shell)
				       ((tcsh csh ksh)    ">&")
				       ((zsh bash sh ash) "2>&1 >")))
				       ((zsh bash sh ash) "2>&1 >")
				       (else ">&")))
			 (fullcmd    (conc "(" (string-intersperse 
						(cons cmd params) " ")
					   ") " redir " " logfile)))
		    ;; mark the start of the test
		    (rdb:teststep-set-status! db run-id test-name stepname "start" "n/a" itemdat (args:get-arg "-m") logfile)
		    (rdb:teststep-set-status! db test-id stepname "start" "n/a" itemdat (args:get-arg "-m") logfile)
		    ;; close the db
		    (sqlite3:finalize! db)
		    ;; (sqlite3:finalize! db)
		    ;; run the test step
		    (debug:print 2 "INFO: Running \"" fullcmd "\"")
		    (change-directory startingdir)
		    (set! exitstat (system fullcmd)) ;; cmd params))
		    (set! *globalexitstatus* exitstat)
		    (change-directory testpath)
		    ;; re-open the db
		    (set! db (open-db))
		    (if (not (args:get-arg "-server"))
			(server:client-setup db))
		    ;; (set! db (open-db))
		    ;; (if (not (args:get-arg "-server"))
		    ;;     (server:client-setup db))
		    ;; run logpro if applicable ;; (process-run "ls" (list "/foo" "2>&1" "blah.log"))
		    (if logprofile
			(let* ((htmllogfile (conc stepname ".html"))
			       (oldexitstat exitstat)
			       (cmd         (string-intersperse (list "logpro" logprofile htmllogfile "<" logfile ">" (conc stepname "_logpro.log")) " ")))
			  (debug:print 2 "INFO: running \"" cmd "\"")
			  (change-directory startingdir)
			  (set! exitstat (system cmd))
			  (set! *globalexitstatus* exitstat) ;; no necessary
			  (change-directory testpath)
			  (test-set-log! db run-id test-name itemdat htmllogfile)))
		    (rdb:teststep-set-status! db run-id test-name stepname "end" exitstat itemdat (args:get-arg "-m") logfile)
		    (sqlite3:finalize! db)
		    (if (not (eq? exitstat 0))
			(exit 254)) ;; (exit exitstat) doesn't work?!?
			  (rdb:test-set-log! db test-id htmllogfile)))
		    (let ((msg (args:get-arg "-m")))
		      (rdb:teststep-set-status! db test-id stepname "end" exitstat itemdat msg logfile))
		    ;; (sqlite3:finalize! db)
		    ;;(if (not (eq? exitstat 0))
		    ;;	(exit 254)) ;; (exit exitstat) doesn't work?!?
		  ;; open the db
		  ;; mark the end of the test
		  )))
	  (if (or (args:get-arg "-test-status")
		  (args:get-arg "-set-values"))
	      (let ((newstatus (cond
				((number? status)       (if (equal? status 0) "PASS" "FAIL"))

		(if (and (args:get-arg "-test-status")
			 (or (not state)
			     (not status)))
		    (begin
		      (debug:print 0 "ERROR: You must specify :state and :status with every call to -test-status\n" help)
		      (sqlite3:finalize! db)
		      (exit 6)))
		(test-set-status! db run-id test-name state newstatus itemdat (args:get-arg "-m") otherdata)))
		(let ((msg (args:get-arg "-m")))
		  (rtests:test-set-status! db test-id state newstatus msg otherdata))))
	  (sqlite3:finalize! db)
	  (set! *didsomething* #t))))

(if (args:get-arg "-showkeys")
    (let ((db #f)
	  (keys #f))
      (if (not (setup-for-run))

;; Copyright 2006-2011, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.

;;  strftime('%m/%d/%Y %H:%M:%S','now','localtime')

(use sqlite3 srfi-1 posix regex regex-case srfi-69 dot-locking)
(use sqlite3 srfi-1 posix regex regex-case srfi-69 dot-locking (srfi 18))
(import (prefix sqlite3 sqlite3:))

(declare (unit runs))
(declare (uses db))
(declare (uses common))
(declare (uses items))
(declare (uses runconfig))

	      (if (not (null? remtests))
		  (loop (car remtests)(cdr remtests)))))))

    (if (not (null? required-tests))
	(debug:print 1 "INFO: Adding " required-tests " to the run queue"))
    ;; NOTE: these are all parent tests, items are not expanded yet.
    (runs:run-tests-queue db run-id runname test-records keyvallst flags)
    (if *rpc:listener* (server:keep-running db))
    (debug:print 4 "INFO: All done by here")))

(define (runs:run-tests-queue db run-id runname test-records keyvallst flags)
    ;; At this point the list of parent tests is expanded 
    ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", keyvallst: " keyvallst)
  (let ((sorted-test-names (tests:sort-by-priority-and-waiton test-records))

	  (debug:print 0 "ERROR: Should not have a list of items in a test and the itemspath set - please report this")
	  (exit 1))))
	
      ;; we get here on "drop through" - loop for next test in queue
      (if (null? tal)
	  (begin
	    ;; FIXME!!!! THIS SHOULD NOT REQUIRE AN EXIT!!!!!!!
	    (debug:print 1 "INFO: All tests launched, exiting")
	    (exit 0))
	    (debug:print 1 "INFO: All tests launched")
	    ;; (exit 0)
	    )
	  (loop (car tal)(cdr tal))))))

;; parent-test is there as a placeholder for when parent-tests can be run as a setup step
(define (run:test db run-id runname keyvallst test-record flags parent-test)
  ;; All these vars might be referenced by the testconfig file reader
  (let* ((test-name    (tests:testqueue-get-testname   test-record))
	 (test-waitons (tests:testqueue-get-waitons    test-record))

    (debug:print 2 "Attempting to launch test " test-name "/" item-path)
    (setenv "MT_TEST_NAME" test-name) ;; 
    (setenv "MT_RUNNAME"   runname)
    (set-megatest-env-vars db run-id) ;; these may be needed by the launching process
    (change-directory *toppath*)

    ;; Here is where the test_meta table is best updated
    ;; Yes, another use of a global for caching. Need a better way?
    (if (not (hash-table-ref/default *test-meta-updated* test-name #f))
        (begin
	   (hash-table-set! *test-meta-updated* test-name #t)
    (runs:update-test_meta db test-name test-conf)
           (runs:update-test_meta db test-name test-conf)))
    
    ;; (lambda (itemdat) ;;; ((ripeness "overripe") (temperature "cool") (season "summer"))
    (let* ((new-test-path (string-intersperse (cons test-path (map cadr itemdat)) "/"))
	   (new-test-name (if (equal? item-path "") test-name (conc test-name "/" item-path))) ;; just need it to be unique
	   (testdat       (db:get-test-info db run-id test-name item-path)))
	   (testdat       (db:get-test-info db run-id test-name item-path))
	   (test-id       #f))
      (if (not testdat)
	  (begin
	    ;; ensure that the path exists before registering the test
	    ;; NOPE: Cannot! Don't know yet which disk area will be assigned....
	    ;; (system (conc "mkdir -p " new-test-path))
	    (rtests:register-test db run-id test-name item-path)
	    (set! testdat (db:get-test-info db run-id test-name item-path))))
      (set! test-id (db:test-get-id testdat))
      (change-directory test-path)
      (case (if force ;; (args:get-arg "-force")
		'NOT_STARTED
		(if testdat
		    (string->symbol (test:get-state testdat))
		    'failed-to-insert))
	((failed-to-insert)

		  (member (test:get-status testdat) '("FAIL" "n/a")))
	     (set! runflag #t))
	    (else (set! runflag #f)))
	   (debug:print 6 "RUNNING => runflag: " runflag " STATE: " (test:get-state testdat) " STATUS: " (test:get-status testdat))
	   (if (not runflag)
	       (if (not parent-test)
		   (debug:print 1 "NOTE: Not starting test " new-test-name " as it is state \"" (test:get-state testdat) 
				"\" and status \"" (test:get-status testdat) "\", use -rerun \"" (test:get-status testdat) "\" or -force to override"))
				"\" and status \"" (test:get-status testdat) "\", use -rerun \"" (test:get-status testdat)
                                "\" or -force to override"))
	       ;; NOTE: No longer be checking prerequisites here! Will never get here unless prereqs are
	       ;;       already met.
	       (if (not (launch-test db run-id runname test-conf keyvallst test-name test-path itemdat flags))
		   (begin
		     (print "ERROR: Failed to launch the test. Exiting as soon as possible")
		     (set! *globalexitstatus* 1) ;; 
		     (process-signal (current-process-id) signal/kill))))))
	((KILLED) 
	 (debug:print 1 "NOTE: " new-test-name " is already running or was explictly killed, use -force to launch it."))
	((LAUNCHED REMOTEHOSTSTART RUNNING)  
	 (if (> (- (current-seconds)(+ (db:test-get-event_time testdat)
				       (db:test-get-run_duration testdat)))
		600) ;; i.e. no update for more than 600 seconds
	     (begin
	       (debug:print 0 "WARNING: Test " test-name " appears to be dead. Forcing it to state INCOMPLETE and status STUCK/DEAD")
	       (test-set-status! db run-id test-name "INCOMPLETE" "STUCK/DEAD" itemdat "Test is stuck or dead" #f))
	       (test-set-status! db test-id "INCOMPLETE" "STUCK/DEAD" "Test is stuck or dead" #f))
	     (debug:print 2 "NOTE: " test-name " is already running")))
	(else       (debug:print 0 "ERROR: Failed to launch test " new-test-name ". Unrecognised state " (test:get-state testdat)))))))

;;======================================================================
;; END OF NEW STUFF
;;======================================================================

;; Since many calls to a run require pretty much the same setup 
;; this wrapper is used to reduce the replication of code
(define (general-run-call switchname action-desc proc)
  (let ((runname (args:get-arg ":runname"))
	(target  (if (args:get-arg "-target")
		     (args:get-arg "-target")
		     (args:get-arg "-reqtarg"))))
		     (args:get-arg "-reqtarg")))
	(th1     #f))
    (cond
     ((not target)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the target with -target")
      (exit 3))
     ((not runname)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the run name with :runname runname")
      (exit 3))
     (else
      (let ((db   #f)
	    (keys #f))
	(if (not (setup-for-run))
	    (begin 
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(set! db   (open-db))
	(if (not (args:get-arg "-server"))
	    (server:client-setup db))
	(if (args:get-arg "-server")
	    (server:start db (args:get-arg "-server"))
	    (if (not (or (args:get-arg "-runall")
			  (args:get-arg "-runtests")))
		(server:client-setup db)))
	(set! keys (rdb:get-keys db))
	;; have enough to process -target or -reqtarg here
	(if (args:get-arg "-reqtarg")
	    (let* ((runconfigf (conc  *toppath* "/runconfigs.config")) ;; DO NOT EVALUATE ALL 
		   (runconfig  (read-config runconfigf #f #f environ-patt: #f))) 
	      (if (hash-table-ref/default runconfig (args:get-arg "-reqtarg") #f)
		  (keys:target-set-args keys (args:get-arg "-reqtarg") args:arg-hash)

	      (debug:print 0 "ERROR: Attempted to " action-desc " but run area config file not found")
	      (exit 1))
	    ;; Extract out stuff needed in most or many calls
	    ;; here then call proc
	    (let* ((keynames   (map key:get-fieldname keys))
		   (keyvallst  (keys->vallist keys #t)))
	      (proc db target runname keys keynames keyvallst)))
	(if th1 (thread-join! th1))
	(sqlite3:finalize! db)
	(set! *didsomething* #t))))))

;;======================================================================
;; Rollup runs
;;======================================================================

    ;;======================================================================
    ;; db specials here
    ;;======================================================================
    ;; ** set-tests-state-status
    (rpc:publish-procedure!
     'rdb:set-tests-state-status 
     (lambda (run-id testnames currstate currstatus newstate newstatus)
       (set! *last-db-access* (current-seconds))
       (db:set-tests-state-status db run-id testnames currstate currstatus newstate newstatus)))

    (rpc:publish-procedure!
     'rdb:teststep-set-status!
     (lambda (run-id test-name teststep-name state-in status-in item-path comment logfile)
       (db:teststep-set-status! db run-id test-name teststep-name state-in status-in item-path comment logfile)))
     (lambda (test-id teststep-name state-in status-in item-path comment logfile)
       (set! *last-db-access* (current-seconds))
       (db:teststep-set-status! db test-id teststep-name state-in status-in item-path comment logfile)))

    (rpc:publish-procedure!
     'rdb:test-update-meta-info
     (lambda (run-id testname item-path minutes cpuload diskfree tmpfree)
       (set! *last-db-access* (current-seconds))
       (db:test-update-meta-info db run-id testname item-path minutes cpuload diskfree tmpfree)))
     
    (rpc:publish-procedure!
     'rdb:test-set-state-status-by-run-id-testname
     (lambda (run-id test-name item-path status state)
       (set! *last-db-access* (current-seconds))
       (db:test-set-state-status-by-run-id-testname db run-id test-name item-path status state)))

    (rpc:publish-procedure!
     'rdb:csv->test-data 
     (lambda (test-id csvdata)
       (set! *last-db-access* (current-seconds))
       (db:csv->data db test-id csvdata)))
       (db:csv->test-data db test-id csvdata)))

    (rpc:publish-procedure!
     'rdb:roll-up-pass-fail-counts
     (lambda (run-id test-name item-path status)
       (set! *last-db-access* (current-seconds))
       (db:roll-up-pass-fail-counts db run-id test-name item-path status)))

    (rpc:publish-procedure!
     'rdb:test-set-comment 
     (lambda (run-id test-name item-path comment)
       (set! *last-db-access* (current-seconds))
       (db:test-set-comment db run-id test-name item-path comment)))
    
    (rpc:publish-procedure!
     'rdb:test-set-log!
     (lambda (run-id test-name item-path logf)
       (db:test-set-log! db run-id test-name item-path logf)))
     (lambda (test-id logf)
       (set! *last-db-access* (current-seconds))
       (db:test-set-log! db test-id logf)))
    
    (rpc:publish-procedure!
     'rpc:get-test-data-by-id
     'rdb:get-test-data-by-id
     (lambda (test-id)
       (set! *last-db-access* (current-seconds))
       (db:get-test-data-by-id db test-id)))

    (rpc:publish-procedure!
     'serve:get-toppath
     (lambda ()
       (set! *last-db-access* (current-seconds))
       *toppath*))

    (rpc:publish-procedure!
     'serve:login
     (lambda (toppath)
       (set! *last-db-access* (current-seconds))
       (if (equal? *toppath* toppath)
	   (begin
	     (debug:print 2 "INFO: login successful")
	     #t)
	   #f)))	     
    
    (rpc:publish-procedure!
     'rdb:get-runs
     (lambda (runnamepatt numruns startrunoffset keypatts)
       (set! *last-db-access* (current-seconds))
       (db:get-runs db runnamepatt numruns startrunoffset keypatts)))

    (rpc:publish-procedure!
     'rdb:get-tests-for-run 
     (lambda (run-id testpatt itempatt states statuses)
       (set! *last-db-access* (current-seconds))
       (db:get-tests-for-run db run-id testpatt itempatt states statuses)))

    (rpc:publish-procedure!
     'rdb:get-keys
     (lambda ()
       (set! *last-db-access* (current-seconds))
       (db:get-keys db)))

    (rpc:publish-procedure!
     'rdb:get-num-runs
     (lambda (runpatt)
       (set! *last-db-access* (current-seconds))
       (db:get-num-runs db runpatt)))

    (rpc:publish-procedure!
     'rdb:test-set-state-status-by-id
     (lambda (test-id newstate newstatus newcomment)
       (set! *last-db-access* (current-seconds))
       (db:test-set-state-status-by-id db test-id newstate newstatus newcomment)))

    (rpc:publish-procedure!
     'rdb:get-key-val-pairs
     (lambda (run-id)
       (set! *last-db-access* (current-seconds))
       (db:get-key-val-pairs db run-id)))

    (rpc:publish-procedure!
     'rdb:get-key-vals
     (lambda (run-id)
       (set! *last-db-access* (current-seconds))
       (db:get-key-vals db run-id)))

    (rpc:publish-procedure!
     'rdb:testmeta-get-record
     (lambda (run-id)
       (set! *last-db-access* (current-seconds))
       (db:testmeta-get-record db run-id)))

    (rpc:publish-procedure!
     'rdb:get-test-data-by-id
     (lambda (test-id)
       (set! *last-db-access* (current-seconds))
       (db:get-test-data-by-id db test-id)))

    (rpc:publish-procedure!
     'rdb:get-run-info
     (lambda (run-id)
       (set! *last-db-access* (current-seconds))
       (db:get-run-info db run-id)))

    (rpc:publish-procedure!
     'rdb:get-steps-for-test
     (lambda (test-id)
       (set! *last-db-access* (current-seconds))
       (db:get-steps-for-test db test-id)))

    (rpc:publish-procedure!
     'rdb:get-steps-table
     (lambda (test-id)
       (set! *last-db-access* (current-seconds))
       (db:get-steps-table db test-id)))

    (rpc:publish-procedure!
     'rdb:read-test-data
     (lambda (test-id categorypatt)
       (set! *last-db-access* (current-seconds))
       (db:read-test-data db test-id categorypatt)))

    (rpc:publish-procedure!
     'rdb:get-test-info
     (lambda (run-id testname item-path)
       (set! *last-db-access* (current-seconds))
       (db:get-test-info db  run-id testname item-path)))

    (rpc:publish-procedure!
     'rdb:delete-test-records
     (lambda (test-id)
       (set! *last-db-access* (current-seconds))
       (db:delete-test-records db test-id)))

    (rpc:publish-procedure!
     'rtests:register-test
     (lambda (run-id test-name item-path)
       (set! *last-db-access* (current-seconds))
       (tests:register-test db run-id test-name item-path)))

    (rpc:publish-procedure!
     'rdb:test-data-rollup
     (lambda (test-id status)
       (set! *last-db-access* (current-seconds))
       (db:test-data-rollup db test-id status)))
    
    (rpc:publish-procedure!
     'rtests:test-set-status!
     (lambda (test-id state status comment dat)
       (set! *last-db-access* (current-seconds))
       (test-set-status! db test-id state status comment dat)))

    (rpc:publish-procedure!
     'rtests:test-set-toplog!
     (lambda (run-id test-name logf)
        (set! *last-db-access* (current-seconds))
        (test-set-toplog! db run-id test-name logf)))

    ;;======================================================================
    ;; end of publish-procedure section
    ;;======================================================================

    (set! *rpc:listener* rpc:listener)
    (on-exit (lambda ()
	       (sqlite3:execute db "DELETE FROM metadat WHERE var='SERVER' and val=?;" host:port)
	       (sqlite3:finalize! db)))
    (thread-start! th1)
    (thread-start! th2)
    ;; (thread-join!  th2)
    ;; return th2 for the calling process to do a join with 
    th2
    (thread-join!  th2))) ;; rpc:server)))
    )) ;; rpc:server)))

(define (server:keep-running db)
  ;; if none running or if > 20 seconds since 
  ;; server last used then start shutdown
  (let loop ((count 0))
    (thread-sleep! 20) ;; no need to do this very often
    (let ((numrunning (db:get-count-tests-running db)))
      (if (or (not (> numrunning 0))
	      (> *last-db-access* (+ (current-seconds) 20)))
	  (begin
	    (debug:print 0 "INFO: Starting to shutdown the server side")
	    (sqlite3:execute db "DELETE FROM metadat WHERE var='SERVER'"); ;;  AND val like ?;"
			  ;; host:port) ;; need to delete only *my* server entry (future use)
	    (thread-sleep! 10)
	    (debug:print 0 "INFO: Server shutdown complete. Exiting")
	    (exit))))
    (loop (+ 1 count))))

(define (server:find-free-port-and-open port)
  (handle-exceptions
   exn
   (begin
     (print "Failed to bind to port " (rpc:default-server-port) ", trying next port")
     (server:find-free-port-and-open (+ port 1)))
   (rpc:default-server-port port)
   (tcp-listen (rpc:default-server-port))))

(define (server:client-setup db)
  (if *runremote*
      (begin
      (debug:print 0 "ERROR: Attempt to connect to server but already connected")
	(debug:print 0 "ERROR: Attempt to connect to server but already connected")
	#f)
      (let* ((hostinfo (db:get-var db "SERVER"))
	     (hostdat  (if hostinfo (string-split hostinfo ":")))
	     (host     (if hostinfo (car hostdat)))
	     (port     (if (and hostinfo (> (length hostdat) 1))(cadr hostdat) #f)))
	(if (and port
		 (string->number port))
	    (let ((portn (string->number port)))

		 (conc "SELECT id FROM runs WHERE " qrystr " AND id != ?;") (append keyvals (list run-id)))
	  ;; for each run starting with the most recent look to see if there is a matching test
	  ;; if found then return that matching test record
	  (debug:print 4 "selstr: " selstr ", qrystr: " qrystr ", keyvals: " keyvals ", previous run ids found: " prev-run-ids)
	  (if (null? prev-run-ids) #f
	      (let loop ((hed (car prev-run-ids))
			 (tal (cdr prev-run-ids)))
		(let ((results (rdb:get-tests-for-run db hed test-name item-path '() '())))
		(let ((results (db:get-tests-for-run db hed test-name item-path '() '())))
		  (debug:print 4 "Got tests for run-id " run-id ", test-name " test-name ", item-path " item-path ": " results)
		  (if (and (null? results)
			   (not (null? tal)))
		      (loop (car tal)(cdr tal))
		      (if (null? results) #f
			  (car results))))))))))
    

			   (hash-table-set! tests-hash full-testname testdat))))
		   results)
		  (if (null? tal)
		      (map cdr (hash-table->alist tests-hash)) ;; return a list of the most recent tests
		      (loop (car tal)(cdr tal))))))))))

;; 
(define (test-set-status! db run-id test-name state status itemdat-or-path comment dat)
(define (test-set-status! db test-id state status comment dat)
  (let* ((real-status status)
	 (item-path   (if (string? itemdat-or-path) itemdat-or-path (item-list->path itemdat-or-path)))
	 (testdat     (db:get-test-info db run-id test-name item-path))
	 (test-id     (if testdat (db:test-get-id testdat) #f))
	 (otherdat    (if dat dat (make-hash-table)))
	 (otherdat    (if dat dat (make-hash-table)))
	 (testdat     (db:get-test-data-by-id db test-id))
	 (run-id      (db:test-get-run_id testdat))
	 (test-name   (db:test-get-testname   testdat))
	 (item-path   (db:test-get-item-path testdat))
	 ;; before proceeding we must find out if the previous test (where all keys matched except runname)
	 ;; was WAIVED if this test is FAIL
	 (waived   (if (equal? status "FAIL")
		       (let ((prev-test (test:get-previous-test-run-record db run-id test-name item-path)))
			 (if prev-test ;; true if we found a previous test in this run series
			     (let ((prev-status (db:test-get-status   prev-test))
				   (prev-state  (db:test-get-state    prev-test))

	  (units    (hash-table-ref/default otherdat ":units"    ""))
	  (type     (hash-table-ref/default otherdat ":type"     ""))
	  (dcomment (hash-table-ref/default otherdat ":comment"  "")))
      (debug:print 4 
		   "category: " category ", variable: " variable ", value: " value
		   ", expected: " expected ", tol: " tol ", units: " units)
      (if (and value expected tol) ;; all three required
	  (rdb:csv->test-data db test-id 
			     (conc category ","
				   variable ","
				   value    ","
				   expected ","
				   tol      ","
				   units    ","
				   dcomment ",," ;; extra comma for status
				   type     ))))
				   
	  (let ((dat (conc category ","
			   variable ","
			   value    ","
			   expected ","
			   tol      ","
			   units    ","
			   dcomment ",," ;; extra comma for status
			   type     )))
	    (rdb:csv->test-data db test-id
				dat))))
      
    ;; need to update the top test record if PASS or FAIL and this is a subtest
    (rdb:roll-up-pass-fail-counts db run-id test-name item-path status)

    (if (or (and (string? comment)
		 (string-match (regexp "\\S+") comment))
	    waived)
	(let ((cmt  (if waived waived comment)))
	(rdb:test-set-comment db  run-id test-name item-path (if waived waived comment)))
	  (rdb:test-set-comment db test-id cmt)))
    ))

(define (test-set-log! db run-id test-name itemdat logf) 
  (let ((item-path (item-list->path itemdat)))
    (rdb:test-set-log! db run-id test-name item-path logf)))

(define (test-set-toplog! db run-id test-name logf) 
  (sqlite3:execute db "UPDATE tests SET final_logf=? WHERE run_id=? AND testname=? AND item_path='';" 
		   logf run-id test-name))

(define (tests:summarize-items db run-id test-name force)
  ;; if not force then only update the record if one of these is true:
  ;;   1. logf is "log/final.log

(define (rtests:register-test db run-id test-name item-path)
  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'rtests:register-test host port) run-id test-name item-path))
      (tests:register-test db run-id test-name item-path)))

(define (rtests:test-set-status!  db test-id state status comment dat)
  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'rtests:test-set-status! host port) test-id state status comment dat))
      (test-set-status! db test-id state status comment dat)))

(define (rtests:test-set-toplog! db run-id test-name logf)
  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
            (port (vector-ref *runremote* 1)))
        ((rpc:procedure 'rtests:test-set-toplog! host port) run-id test-name logf))
      (test-set-toplog! db run-id test-name logf)))

# run some tests

BINPATH=$(shell realpath ../bin)
MEGATEST=$(BINPATH)/megatest
PATH := $(BINPATH):$(PATH)
RUNNAME := $(shell date +w%V.%u.%H)
IPADDR :="-"

runall :
	cd ../;make install
runall : test1 test2

test1 : cleanprep
	$(MEGATEST) -runtests ez_pass -target ubuntu/nfs/none :runname $(RUNNAME)_a -server $(IPADDR)

test2 : cleanprep
	$(MEGATEST) -runtests runfirst -target ubuntu/nfs/none :runname $(RUNNAME)_b  -server $(IPADDR) -debug 10

test3 : cleanprep
	$(MEGATEST) -runall -target ubuntu/nfs/none :runname $(RUNNAME)_b -m "This is a comment specific to a run" -v -server $(IPADDR) 

cleanprep : ../*.scm
	sqlite3 megatest.db "delete from metadat where var='SERVER';"
	mkdir -p /tmp/mt_runs /tmp/mt_links
	cd ..;make
	@sleep 1
	@if ps -def |awk '{print $8}'|grep megatest; then \
	   echo WARNING: These tests will kill megatest and dashboard!; \
	   sleep 3; \
	   killall -9 dboard || true; \
  	   killall -9 megatest || true; \
	fi
	cd ../;make install
	$(MEGATEST) -remove-runs :runname $(RUNNAME)% -target %/%/% -testpatt % -itempatt %
	$(BINPATH)/dboard -rows 15 &
	$(MEGATEST) -runall -target ubuntu/nfs/none :runname `date +w%V.%u.%H` -m "This is a comment specific to a run" -v
	touch cleanprep

test :
	csi -b -I .. ../megatest.scm -- -runall -target ubuntu/afs/tmp :runname blah
	cd ../;make test
	make runall

dashboard :
	cd ../;make install
	$(BINPATH)/dboard &

remove :
	(cd ../;make);$(MEGATEST) -remove-runs :runname $(RUN)  -testpatt % -itempatt % :sysname % :fsname % :datapath %

clean  : 
	rm cleanprep

runforever :
	while(ls); do runname=`date +%F-%R:%S`;$(MEGATEST) -runall -target ubuntu/nfs/none :runname $$runname;/home/matt/data/megatest/megatest -runall -target ubuntu/nfs/none :runname $$runname;/home/matt/data/megatest/megatest -runall -target ubuntu/nfs/none :runname $$runname;done

[fields]
sysname TEXT
fsname TEXT
datapath TEXT

[setup]
# exectutable /path/to/megatest
max_concurrent_jobs 200
linktree /tmp/mt_links

[jobtools]
# useshell yes
useshell yes
# ## launcher launches jobs, the job is managed on the target host
## by megatest, comment out launcher to run local
# workhosts localhost hermes
launcher nbfake
# launcher nodanggood

## use "xterm -e csi -- " as a launcher to examine the launch environment.

    source $prev_env
fi

# source the environment from the previous step if it exists

# if a logpro file exists then use it otherwise just run the command, nb// was using 2>&1
if [ -e ${stepname}.logpro ];then
   # could do:
   $command 2>&1| tee ${stepname}.log | logpro ${stepname}.logpro ${stepname}.html &> /dev/null
   logprostatus=$?
   $command 2>&1| logpro ${stepname}.logpro ${stepname}.html &> ${stepname}.log 
   # $command 2>&1| logpro ${stepname}.logpro ${stepname}.html &> ${stepname}.log 
   # allstatus=(${PIPESTATUS[0]} ${PIPESTATUS[1]}) 
   allstatus=(${PIPESTATUS[0]} ${PIPESTATUS[1]})
   runstatus=${allstatus[0]}
   logprostatus=${allstatus[1]}
   # logprostatus=${allstatus[1]}
else
   $command &> ${stepname}.log
   runstatus=$?
   logprostatus=$runstatus
fi

# If the test exits with non-zero, we will record FAIL even if logpro