Megatest

	  (set! *last-global-delta-printed* *global-delta*)))
    (debug:print-info 11 "open-run-close-measure END" )
    res))

(define (db:initialize db)
  (debug:print-info 11 "db:initialize START")
  (let* ((configdat (car *configinfo*))  ;; tut tut, global warning...
	 (keys     (config-get-fields configdat))
	 (havekeys (> (length keys) 0))
	 (keystr   (keys->keystr keys))
	 (fieldstr (keys->key/field keys)))
    (for-each (lambda (key)
		(let ((keyn (vector-ref key 0)))
		  (if (member (string-downcase keyn)
			      (list "runname" "state" "status" "owner" "event_time" "comment" "fail_count"
				    "pass_count"))
		      (begin
			(print "ERROR: your key cannot be named " keyn " as this conflicts with the same named field in the runs table")
			(system (conc "rm -f " dbpath))
			(exit 1)))))
	      keys)
    ;; (sqlite3:execute db "PRAGMA synchronous = OFF;")
    (db:set-sync db)
    (sqlite3:execute db "CREATE TABLE IF NOT EXISTS keys (id INTEGER PRIMARY KEY, fieldname TEXT, fieldtype TEXT, CONSTRAINT keyconstraint UNIQUE (fieldname));")
    (for-each (lambda (key)
		(sqlite3:execute db "INSERT INTO keys (fieldname,fieldtype) VALUES (?,?);" (key:get-fieldname key)(key:get-fieldtype key)))
	      keys)
    (sqlite3:execute db (conc 
			 "CREATE TABLE IF NOT EXISTS runs (id INTEGER PRIMARY KEY, " 
			 fieldstr (if havekeys "," "")
			 "runname TEXT,"
			 "state TEXT DEFAULT '',"
			 "status TEXT DEFAULT '',"

  (debug:print-info 11 "db:set-var END " var " " val))

(define (db:del-var db var)
  (debug:print-info 11 "db:del-var START " var)
  (sqlite3:execute db "DELETE FROM metadat WHERE var=?;" var)
  (debug:print-info 11 "db:del-var END " var))

;; use a global for some primitive caching, it is just silly to re-read the db 
;; over and over again for the keys since they never change





(define (db:get-keys db)
  (if *db-keys* *db-keys* 
      (let ((res '()))
	(debug:print-info 11 "db:get-keys START (cache miss)")
	(sqlite3:for-each-row 
	 (lambda (key keytype)
	   (set! res (cons (vector key keytype) res)))
	 db
	 "SELECT fieldname,fieldtype FROM keys ORDER BY id DESC;")
	(set! *db-keys* res)
	(debug:print-info 11 "db:get-keys END (cache miss)")
	res)))

(define (db:get-value-by-header row header field)
  (debug:print-info 4 "db:get-value-by-header row: " row " header: " header " field: " field)
  (if (null? header) #f
      (let loop ((hed (car header))
		 (tal (cdr header))

(define (db:get-run-key-val db run-id key)
  (let ((res #f))
    (sqlite3:for-each-row
     (lambda (val)
       (set! res val))
     db 
     (conc "SELECT " (key:get-fieldname key) " FROM runs WHERE id=?;")
     run-id)
    res))

;; keys list to key1,key2,key3 ...
(define (runs:get-std-run-fields keys remfields)
  (let* ((header    (append (map key:get-fieldname keys)
			    remfields))
	 (keystr    (conc (keys->keystr keys) ","
			  (string-intersperse remfields ","))))
    (list keystr header)))

;; make a query (fieldname like 'patt1' OR fieldname 
(define (db:patt->like fieldname pattstr #!key (comparator " OR "))
  (let ((patts (if (string? pattstr)
		   (string-split pattstr ",")
		   '("%"))))
    (string-intersperse (map (lambda (patt)
			       (let ((wildtype (if (substring-index "%" patt) "LIKE" "GLOB")))
				 (conc fieldname " " wildtype " '" patt "'")))
			     (if (null? patts)
				 '("")
				 patts))
			comparator)))


;; register a test run with the db
(define (db:register-run db keys keyvallst runname state status user)
  (debug:print 3 "runs:register-run, keys: " keys " keyvallst: " keyvallst " runname: " runname " state: " state " status: " status " user: " user)
  (let* ((keystr    (keys->keystr keys))
	 (comma     (if (> (length keys) 0) "," ""))
	 (andstr    (if (> (length keys) 0) " AND " ""))
	 (valslots  (keys->valslots keys)) ;; ?,?,? ...
	 (keyvals   (map cadr keyvallst))
	 (allvals   (append (list runname state status user) keyvals))
	 (qryvals   (append (list runname) keyvals))
	 (key=?str  (string-intersperse (map (lambda (k)(conc (key:get-fieldname k) "=?")) keys) " AND ")))
    (debug:print 3 "keys: " keys " allvals: " allvals " keyvals: " keyvals)
    (debug:print 2 "NOTE: using target " (string-intersperse keyvals "/") " for this run")
    (if (and runname (null? (filter (lambda (x)(not x)) keyvals))) ;; there must be a better way to "apply and"
	(let ((res #f))
	  (apply sqlite3:execute db (conc "INSERT OR IGNORE INTO runs (runname,state,status,owner,event_time" comma keystr ") VALUES (?,?,?,?,strftime('%s','now')" comma valslots ");")
		 allvals)
	  (apply sqlite3:for-each-row 
	   (lambda (id)
	     (set! res id))

;; runpatts: patt1,patt2 ...
;;
(define (db:get-runs db runpatt count offset keypatts)
  (let* ((res       '())
	 (keys       (db:get-keys db))
	 (runpattstr (db:patt->like "runname" runpatt))
	 (remfields  (list "id" "runname" "state" "status" "owner" "event_time"))
	 (header     (append (map key:get-fieldname keys)
		             remfields))
	 (keystr     (conc (keys->keystr keys) ","
		           (string-intersperse remfields ",")))
	 (qrystr     (conc "SELECT " keystr " FROM runs WHERE (" runpattstr ") " ;; runname LIKE ? "
		           ;; Generate: " AND x LIKE 'keypatt' ..."
		           (if (null? keypatts) ""
		               (conc " AND "
				     (string-join 

;; use (get-value-by-header (db:get-header runinfo)(db:get-row runinfo))
(define (db:get-run-info db run-id)
  ;;(if (hash-table-ref/default *run-info-cache* run-id #f)
  ;;    (hash-table-ref *run-info-cache* run-id)
      (let* ((res      #f)
	     (keys      (db:get-keys db))
	     (remfields (list "id" "runname" "state" "status" "owner" "event_time"))
	     (header    (append (map key:get-fieldname keys)
				remfields))
	     (keystr    (conc (keys->keystr keys) ","
			      (string-intersperse remfields ","))))
	(debug:print-info 11 "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
	(sqlite3:for-each-row
	 (lambda (a . x)
	   (set! res (apply vector a x)))
	 db

;;======================================================================
;; K E Y S
;;======================================================================

;; get key val pairs for a given run-id
;; ( (FIELDNAME1 keyval1) (FIELDNAME2 keyval2) ... )
(define (db:get-key-val-pairs db run-id)
  (let* ((keys (get-keys db))
	 (res  '()))
    (debug:print-info 11 "db:get-key-val-pairs START keys: " keys " run-id: " run-id)
    (for-each 
     (lambda (key)
       (let ((qry (conc "SELECT " (key:get-fieldname key) " FROM runs WHERE id=?;")))
	 ;; (debug:print 0 "qry: " qry)
	 (sqlite3:for-each-row 
	  (lambda (key-val)
	    (set! res (cons (list (key:get-fieldname key) key-val) res)))
	  db qry run-id)))
     keys)
    (debug:print-info 11 "db:get-key-val-pairs END keys: " keys " run-id: " run-id)
    (reverse res)))

;; get key vals for a given run-id
(define (db:get-key-vals db run-id)
  (let ((mykeyvals (hash-table-ref/default *keyvals* run-id #f)))
    (if mykeyvals 
	mykeyvals
	(let* ((keys (get-keys db))
	       (res  '()))
	  (debug:print-info 11 "db:get-key-vals START keys: " keys " run-id: " run-id)
	  (for-each 
	   (lambda (key)
	     (let ((qry (conc "SELECT " (key:get-fieldname key) " FROM runs WHERE id=?;")))
	       ;; (debug:print 0 "qry: " qry)
	       (sqlite3:for-each-row 
		(lambda (key-val)
		  (set! res (cons key-val res)))
		db qry run-id)))
	   keys)
	  (debug:print-info 11 "db:get-key-vals END keys: " keys " run-id: " run-id)

;;======================================================================
;; Copyright 2006-2012, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

(define-inline (key:get-fieldname key)(vector-ref key 0))
(define-inline (key:get-fieldtype key)(vector-ref key 1))

(define-inline (keys->valslots keys) ;; => ?,?,? ....
  (string-intersperse (map (lambda (x) "?") keys) ","))

(define-inline (keys->key/field keys . additional)
  (string-join (map (lambda (k)(conc (key:get-fieldname k) " " 
				     (key:get-fieldtype k)))
		    (append keys additional)) ","))

(define-inline (item-list->path itemdat)
  (if (list? itemdat)
      (string-intersperse  (map cadr itemdat) "/")
      ""))

(declare (unit keys))
(declare (uses common))

(include "key_records.scm")
(include "common_records.scm")

(define (get-keys db)
  (let ((keys '())) ;; keys are vectors <fieldname,type>
    (sqlite3:for-each-row (lambda (fieldname fieldtype)
			    (set! keys (cons (vector fieldname fieldtype) keys)))
			  db
			  "SELECT fieldname,fieldtype FROM keys ORDER BY id ASC;")
    (reverse keys))) ;; could just sort desc?

(define (keys->keystr keys) ;; => key1,key2,key3,additiona1, ...
  (string-intersperse (map key:get-fieldname keys) ","))

(define (args:usage . a) #f)

;; keys->vallist is called several times (quite unnecessarily), use this hash to suppress multiple
;; reporting of missing keys on the command line.
(define keys:warning-suppress-hash (make-hash-table))

;;======================================================================
;; key <=> target routines
;;======================================================================

;; this now invalidates using "/" in item names





(define (keys:target-set-args keys target ht)
  (let ((vals (string-split target "/")))
    (if (eq? (length vals)(length keys))
	(for-each (lambda (key val)

		    (hash-table-set! ht (conc ":" (vector-ref key 0)) val))
		  keys
		  vals)
	(debug:print 0 "ERROR: wrong number of values in " target ", should match " keys))
    vals))

;; given the keys (a list of vectors <key field>) and a target return a keyval list
;; keyval list ( (key1 val1) (key2 val2) ...)
(define (keys:target->keyval keys target)
  (let* ((targlist (string-split target "/"))
	 (numkeys  (length keys))
	 (numtarg  (length targlist))
	 (targtweaked (if (> numkeys numtarg)
			  (append targlist (make-list (- numkeys numtarg) ""))
			  targlist)))
    (map (lambda (key targ)
	   (list (vector-ref key 0) targ))
	 keys targtweaked)))


;;======================================================================
;; key <=> args routines
;;======================================================================

;; Using the keys pulled from the database (initially set from the megatest.config file)
;; look for the equivalent value on the command line and add it to a list, or #f if not found.
;; default => (val1 val2 val3 ...)
;; withkey => (:key1 val1 :key2 val2 :key3 val3 ...)
(define (keys->vallist keys . withkey) ;; ORDERING IS VERY IMPORTANT, KEEP PROPER ORDER HERE!
  (let* ((keynames   (map key:get-fieldname keys))
	 (argkeys    (map (lambda (k)(conc ":" k)) keynames))
	 (withkey    (not (null? withkey)))
	 (newremargs (args:get-args 
		      (cons "blah" remargs) ;; the cons blah works around a bug in args [args assumes ("calling-prog-name" .... ) ]
		      argkeys 
		      '()
		      args:arg-hash 
		      0)))
    ;;(debug:print 0 "remargs: " remargs " newremargs: " newremargs)
    (apply append (map (lambda (x)
			 (let ((val (args:get-arg x)))
			   ;; (debug:print 0 "x: " x " val: " val)
			   (if (not val)
			       (begin
				 (if (not (hash-table-ref/default keys:warning-suppress-hash x #f))
				     (begin
				       (debug:print 0 "WARNING: missing key " x ". Specified in database but not on command line, using \"unk\"")
				       (hash-table-set! keys:warning-suppress-hash x #t)))
				 (set! val "default")))
			   (if withkey (list x val) (list val))))
		       argkeys))))
  
;; Given a list of keys (list of vectors) return an alist ((key argval) ...)
(define (keys->alist keys defaultval)
  (let* ((keynames   (map key:get-fieldname keys))
	 (newremargs (args:get-args (cons "blah" remargs) (map (lambda (k)(conc ":" k)) keynames) '() args:arg-hash 0))) ;; the cons blah works around a bug in args
    (map (lambda (key)
	   (let ((val (args:get-arg (conc ":" key))))
	     (list key (if val val defaultval))))
	 keynames)))

(define (keystring->keys keystring)
  (map (lambda (x)
	 (let ((xlst (string-split x ":")))
	   (list->vector (if (> (length xlst) 1) xlst (append (car xlst)(list "TEXT"))))))
       (delete-duplicates (string-split keystring ","))))

(define (config-get-fields confdat)
  (let ((fields (hash-table-ref/default confdat "fields" '())))
    (map (lambda (x)(vector (car x)(cadr x)))
	 fields)))

;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch
;;      (launch-test db (cadr status) test-conf))
(define (launch-test test-id run-id run-info key-vals runname test-conf keyvallst test-name test-path itemdat params)
  (change-directory *toppath*)
  (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
   (list ;; (list "MT_TEST_RUN_DIR" work-area)
    (list "MT_RUN_AREA_HOME" *toppath*)
    (list "MT_TEST_NAME" test-name)
    ;; (list "MT_ITEM_INFO" (conc itemdat)) 
    (list "MT_RUNNAME"   runname)

	 (diskpath   #f)
	 (cmdparms   #f)
	 (fullcmd    #f) ;; (define a (with-output-to-string (lambda ()(write x))))
	 (mt-bindir-path #f)
	 (item-path (item-list->path itemdat))
	 ;; (test-id    (cdb:remote-run db:get-test-id #f run-id test-name item-path))
	 (testinfo   (cdb:get-test-info-by-id *runremote* test-id))
	 (mt_target  (string-intersperse (map cadr keyvallst) "/"))
	 (debug-param (append (if (args:get-arg "-debug")  (list "-debug" (args:get-arg "-debug")) '())
			      (if (args:get-arg "-logging")(list "-logging") '()))))
    (if hosts (set! hosts (string-split hosts)))
    ;; set the megatest to be called on the remote host
    (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
    (set! mt-bindir-path (pathname-directory remote-megatest))
    (if launcher (set! launcher (string-split launcher)))

				     (list 'itemdat   itemdat  )
				     (list 'megatest  remote-megatest)
				     (list 'ezsteps   ezsteps) 
				     (list 'target    mt_target)
				     (list 'env-ovrd  (hash-table-ref/default *configdat* "env-override" '())) 
				     (list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
				     (list 'runname   runname)
				     (list 'mt-bindir-path mt-bindir-path))))))) ;; (string-intersperse keyvallst " "))))
    ;; clean out step records from previous run if they exist
    ;; (debug:print-info 4 "FIXMEEEEE!!!! This can be removed some day, perhaps move all test records to the test db?")
    ;; (open-run-close db:delete-test-step-records db test-id)
    (change-directory work-area) ;; so that log files from the launch process don't clutter the test dir
    (tests:test-set-status! test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
    (cond
     ((and launcher hosts) ;; must be using ssh hostname

(define *db* #f) ;; this is only for the repl, do not use in general!!!!

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "megatest-fossil-hash.scm")

;; (use trace dot-locking)
;;  (trace
;;   tests:match
;;   runs:run-tests)
;;  db:teststep-set-status!
;;  db:open-test-db-by-test-id
;;  db:test-get-rundir-from-test-id
;;  cdb:tests-register-test
;;  cdb:tests-update-uname-host
;;  cdb:tests-update-run-duration
;;  ;;  cdb:client-call
;;  ;; cdb:remote-run
;; )
;;  cdb:test-set-status-state
;;  change-directory
;;  db:process-queue-item
;;  db:test-get-logfile-info
;;  db:teststep-set-status!
;;  nice-path
;;  obtain-dot-lock
;;  open-run-close
;;  read-config
;;  runs:can-run-more-tests
;;  sqlite3:execute
;;  sqlite3:for-each-row
;;  tests:check-waiver-eligibility
;;  tests:summarize-items
;;  tests:test-set-status!
;;  thread-sleep!
;;)
       

(define help (conc "
Megatest, documentation at http://www.kiatoa.com/fossils/megatest
  version " megatest-version "
  license GPL, Copyright Matt Welland 2006-2012

Usage: megatest [options]

			  new-state-status: (args:get-arg "-set-state-status")))
    (set! *didsomething* #t))))
	  
(if (args:get-arg "-remove-runs")
    (general-run-call 
     "-remove-runs"
     "remove runs"
     (lambda (target runname keys keynames keyvallst)
       (operate-on 'remove-runs))))

(if (args:get-arg "-set-state-status")
    (general-run-call 
     "-set-state-status"
     "set state and status"
     (lambda (target runname keys keynames keyvallst)
       (operate-on 'set-state-status))))

;;======================================================================
;; Query runs
;;======================================================================

(if (or (args:get-arg "-list-runs")
	(args:get-arg "-list-db-targets"))
    (if (setup-for-run)
	(let* ((db       #f)
	       (runpatt  (args:get-arg "-list-runs"))
	       (testpatt (if (args:get-arg "-testpatt") 
			     (args:get-arg "-testpatt") 
			     "%"))
	       (runsdat  (cdb:remote-run db:get-runs #f runpatt #f #f '()))
	       (runs     (db:get-rows runsdat))
	       (header   (db:get-header runsdat))
	       (keys     (cdb:remote-run db:get-keys #f))
	       (keynames (map key:get-fieldname keys))
	       (db-targets (args:get-arg "-list-db-targets"))
	       (seen     (make-hash-table)))
	  ;; Each run
	  (for-each 
	   (lambda (run)
	     (let ((targetstr (string-intersperse (map (lambda (x)
							 (db:get-value-by-header run header x))
						       keynames) "/")))
	       (if db-targets
		   (if (not (hash-table-ref/default seen targetstr #f))
		       (begin
			 (hash-table-set! seen targetstr #t)
			 ;; (print "[" targetstr "]"))))
			 (print targetstr))))
	       (if (not db-targets)

;;   process deferred tasks per above steps

;; run all tests are are Not COMPLETED and PASS or CHECK
(if (args:get-arg "-runall")
    (general-run-call 
     "-runall"
     "run all tests"
     (lambda (target runname keys keynames keyvallst)
       (runs:run-tests target
		       runname
		       "%"
		       (args:get-arg "-testpatt")
		       user
		       args:arg-hash))))

;;    - if test run time > allowed run time then kill job
;;    - if cannot access db > allowed disconnect time then kill job

(if (args:get-arg "-runtests")
  (general-run-call 
   "-runtests" 
   "run a test" 
   (lambda (target runname keys keynames keyvallst)
     (runs:run-tests target
		     runname
		     (args:get-arg "-runtests")
		     (args:get-arg "-runtests")
		     user
		     args:arg-hash))))

;;======================================================================
;; Rollup into a run
;;======================================================================

(if (args:get-arg "-rollup")
    (begin
      (debug:print 0 "ERROR: Rollup is currently not working. If you need it please submit a ticket at http://www.kiatoa.com/fossils/megatest")
      (exit 4)))
;;     (general-run-call 
;;      "-rollup" 
;;      "rollup tests" 
;;      (lambda (target runname keys keynames keyvallst)
;;        (runs:rollup-run keys
;; 			(keys->alist keys "na")
;; 			(args:get-arg ":runname") 
;; 			user))))

;;======================================================================
;; Lock or unlock a run
;;======================================================================

(if (or (args:get-arg "-lock")(args:get-arg "-unlock"))
    (general-run-call 
     (if (args:get-arg "-lock") "-lock" "-unlock")
     "lock/unlock tests" 
     (lambda (target runname keys keynames keyvallst)
       (runs:handle-locking 
		  target
		  keys
		  (args:get-arg ":runname") 
		  (args:get-arg "-lock")
		  (args:get-arg "-unlock")
		  user))))

		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -test-paths or -test-files, exiting")
		(exit 1)))
	  (let* ((keys     (cdb:remote-run db:get-keys db))
		 (keynames (map key:get-fieldname keys))
		 ;; db:test-get-paths must not be run remote
		 (paths    (db:test-get-paths-matching db keynames target (args:get-arg "-test-files"))))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(print path))
		      paths)))
	;; else do a general-run-call
	(general-run-call 
	 "-test-files"
	 "Get paths to test"
	 (lambda (target runname keys keynames keyvallst)
	   (let* ((db       #f)
		  ;; DO NOT run remote
		  (paths    (db:test-get-paths-matching db keynames target (args:get-arg "-test-files"))))
	     (for-each (lambda (path)
			 (print path))
		       paths))))))

;;======================================================================
;; Archive tests
;;======================================================================

		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -archive, exiting")
		(exit 1)))
	  (let* ((keys     (cdb:remote-run db:get-keys db))
		 (keynames (map key:get-fieldname keys))
		 ;; DO NOT run remote
		 (paths    (db:test-get-paths-matching db keynames target)))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(print path))
		      paths)))
	;; else do a general-run-call
	(general-run-call 
	 "-test-paths"
	 "Get paths to tests"
	 (lambda (target runname keys keynames keyvallst)
	   (let* ((db       #f)
		  ;; DO NOT run remote
		  (paths    (db:test-get-paths-matching db keynames target)))
	     (for-each (lambda (path)
			 (print path))
		       paths))))))

;;======================================================================
;; Extract a spreadsheet from the runs database
;;======================================================================

(if (args:get-arg "-extract-ods")
    (general-run-call
     "-extract-ods"
     "Make ods spreadsheet"
     (lambda (target runname keys keynames keyvallst)
       (let ((db         #f)
	     (outputfile (args:get-arg "-extract-ods"))
	     (runspatt   (args:get-arg ":runname"))
	     (pathmod    (args:get-arg "-pathmod"))
	     (keyvalalist (keys->alist keys "%")))
	 (debug:print 2 "Extract ods, outputfile: " outputfile " runspatt: " runspatt " keyvalalist: " keyvalalist)
	 (cdb:remote-run db:extract-ods-file db outputfile keyvalalist (if runspatt runspatt "%") pathmod)))))

;;======================================================================
;; execute the test
;;    - gets called on remote host
;;    - receives info from the -execute param
;;    - passes info to steps via MT_CMDINFO env var (future is to use a dot file)

    (let ((db #f)
	  (keys #f))
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "Failed to setup, exiting")
	    (exit 1)))
      (set! keys (cbd:remote-run db:get-keys db))
      (debug:print 1 "Keys: " (string-intersperse (map key:get-fieldname keys) ", "))
      (if db (sqlite3:finalize! db))
      (set! *didsomething* #t)))

(if (args:get-arg "-gui")
    (begin
      (debug:print 0 "Look at the dashboard for now")
      ;; (megatest-gui)

    ;; NOTE: Also build the test tree browser and look up table
    ;;
    ;; Each run is unique on its keys and runname or run-id, store in hash on colnum
    (for-each (lambda (run-id)
		(let* ((run-record (hash-table-ref/default runs-hash run-id #f))
		       (key-vals   (map (lambda (key)(db:get-value-by-header run-record header key))
					  (map key:get-fieldname keys)))
		       (run-name   (db:get-value-by-header run-record header "runname"))
		       (col-name   (conc (string-intersperse key-vals "\n") "\n" run-name))
		       (run-path   (append key-vals (list run-name))))
		  (hash-table-set! (dboard:data-get-run-keys *data*) run-id run-path)
		  (iup:attribute-set! (dboard:data-get-runs-matrix *data*)
				      (conc rownum ":" colnum) col-name)
		  (hash-table-set! runid-to-col run-id (list colnum run-record))

;; test-records is a hash table testname:item_path => vector < testname testconfig waitons priority items-info ... >
(define (runs:run-tests-queue-classic run-id runname test-records keyvallst flags test-patts)
    ;; At this point the list of parent tests is expanded 
    ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", keyvallst: " keyvallst " flags: " (hash-table->alist flags))
  (let ((run-info              (cdb:remote-run db:get-run-info #f run-id))
	(key-vals              (cdb:remote-run db:get-key-vals #f run-id))
	(sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
	(test-registry         (make-hash-table))
	(registry-mutex        (make-mutex))
	(num-retries           0)
	(max-retries           (config-lookup *configdat* "setup" "maxretries"))

		  (thread-sleep! 1) ;; (+ 2 *global-delta*))
		  ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
		  (loop (car newtal)(cdr newtal) reruns))
		 ((and have-resources
		       (or (null? prereqs-not-met)
			   (and (eq? testmode 'toplevel)
				(null? non-completed))))
		  (run:test run-id run-info key-vals runname keyvallst test-record flags #f)
		  (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'running)
		  (runs:shrink-can-run-more-tests-count)  ;; DELAY TWEAKER (still needed?)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (car tal)(cdr tal) reruns)))
		 (else ;; must be we have unmet prerequisites
		    (debug:print 4 "FAILS: " fails)

;; test-records is a hash table testname:item_path => vector < testname testconfig waitons priority items-info ... >
(define (runs:run-tests-queue-new run-id runname test-records keyvallst flags test-patts reglen)
  ;; At this point the list of parent tests is expanded 
  ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", keyvallst: " keyvallst " flags: " (hash-table->alist flags))
  (let ((run-info              (cdb:remote-run db:get-run-info #f run-id))
	(key-vals              (cdb:remote-run db:get-key-vals #f run-id))
	(sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
	(test-registry         (make-hash-table))
	(registry-mutex        (make-mutex))
	(num-retries           0)
	(max-retries           (config-lookup *configdat* "setup" "maxretries"))

		  (thread-sleep! 1) ;; (+ 2 *global-delta*))
		  ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
		  (loop (car newtal)(cdr newtal) reg reruns))
		 ((and have-resources
		       (or (null? prereqs-not-met)
			   (and (eq? testmode 'toplevel)
				(null? non-completed))))
		  (run:test run-id run-info key-vals runname keyvallst test-record flags #f)
		  (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'running)
		  (runs:shrink-can-run-more-tests-count)  ;; DELAY TWEAKER (still needed?)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (runs:queue-next-hed tal reg reglen regfull)
			    (runs:queue-next-tal tal reg reglen regfull)
			    (runs:queue-next-reg tal reg reglen regfull)

;; (define (setup-env-defaults db fname run-id already-seen #!key (environ-patt #f)(change-env #t))
(define (setup-env-defaults fname run-id already-seen keys keyvals #!key (environ-patt #f)(change-env #t))
  (let* (;; (keys    (db:get-keys db))
	 ;; (keyvals (if run-id (db:get-key-vals db run-id) #f))
	 (thekey  (if keyvals (string-intersperse (map (lambda (x)(if x x "-na-")) keyvals) "/")
		      (if (args:get-arg "-reqtarg") 
			  (args:get-arg "-reqtarg")
			  (if (args:get-arg "-target")
			      (args:get-arg "-target")
			      (begin
				(debug:print 0 "ERROR: setup-env-defaults called with no run-id or -target or -reqtarg")
				"nothing matches this I hope")))))
	 ;; Why was system disallowed in the reading of the runconfigs file?
	 ;; NOTE: Should be setting env vars based on (target|default)
	 (confdat (read-config fname #f #t environ-patt: environ-patt sections: (list "default" thekey)))
	 (whatfound (make-hash-table))
	 (finaldat  (make-hash-table))
	 (sections (list "default" thekey)))
    (if (not *target*)(set! *target* thekey)) ;; may save a db access or two but repeats db:get-target code
    (debug:print 4 "Using key=\"" thekey "\"")

    (if change-env
	(for-each
	 (lambda (key val)
	   (setenv (vector-ref key 0) val))
	 keys keyvals))
	
    (for-each 
     (lambda (section)
       (let ((section-dat (hash-table-ref/default confdat section #f)))
	 (if section-dat
	     (for-each 

;; get runs by list of criteria
;; register a test run with the db
;;
;; Use: (db-get-value-by-header (db:get-header runinfo)(db:get-row runinfo))
;;  to extract info from the structure returned
;;
(define (runs:get-runs-by-patt db keys runnamepatt) ;; test-name)
  (let* ((keyvallst (keys->vallist keys))
	 (tmp      (runs:get-std-run-fields keys '("id" "runname" "state" "status" "owner" "event_time")))
	 (keystr   (car tmp))
	 (header   (cadr tmp))
	 (res     '())
	 (key-patt "")
	 (runwildtype (if (substring-index "%" runnamepatt) "like" "glob"))
	 (qry-str  #f))
    (for-each (lambda (keyval)

	   (lambda (key)
	     (hash-table-set! vals key (cdb:remote-run db:get-run-key-val #f run-id key)))
	   keys)))
    ;; from the cached data set the vars
    (hash-table-for-each
     vals
     (lambda (key val)
       (debug:print 2 "setenv " (key:get-fieldname key) " " val)
       (setenv (key:get-fieldname key) val)))
    (alist->env-vars (hash-table-ref/default *configdat* "env-override" '()))
    ;; Lets use this as an opportunity to put MT_RUNNAME in the environment
    (setenv "MT_RUNNAME" (if inrunname inrunname (cdb:remote-run db:get-run-name-from-id #f run-id)))
    (setenv "MT_RUN_AREA_HOME" *toppath*)
    ))

(define (set-item-env-vars itemdat)
  (for-each (lambda (item)
	      (debug:print 2 "setenv " (car item) " " (cadr item))
	      (setenv (car item) (cadr item)))
	    itemdat))

;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.
;;              FIXME: error out if /patt specified
;;            
(define (runs:run-tests target runname test-names test-patts user flags)
  (common:clear-caches) ;; clear all caches
  (let* ((db          #f)
	 (keys        (cdb:remote-run db:get-keys #f))
	 (keyvallst   (keys:target->keyval keys target))
	 (run-id      (cdb:remote-run db:register-run #f keys keyvallst runname "new" "n/a" user))  ;;  test-name)))
	 (keyvals     (if run-id (cdb:remote-run db:get-key-vals #f run-id) #f))
	 (deferred    '()) ;; delay running these since they have a waiton clause
	 ;; keepgoing is the defacto modality now, will add hit-n-run a bit later
	 ;; (keepgoing   (hash-table-ref/default flags "-keepgoing" #f))
	 (runconfigf   (conc  *toppath* "/runconfigs.config"))
	 (required-tests '())
	 (test-records (make-hash-table)))

    (if (not (null? required-tests))
	(debug:print-info 1 "Adding " required-tests " to the run queue"))
    ;; NOTE: these are all parent tests, items are not expanded yet.
    (debug:print-info 4 "test-records=" (hash-table->alist test-records))
    (let ((reglen (any->number  (configf:lookup *configdat* "setup" "runqueue"))))
      (if reglen
	  (runs:run-tests-queue-new run-id runname test-records keyvallst flags test-patts reglen)
	  (runs:run-tests-queue-classic run-id runname test-records keyvallst flags test-patts)))
    (debug:print-info 4 "All done by here")))

(define (runs:calc-fails prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (equal? (db:test-get-state test) "COMPLETED")
		 (not (member (db:test-get-status test)

	  '()
	  reg)))

(include "run-tests-queue-classic.scm")
(include "run-tests-queue-new.scm")

;; parent-test is there as a placeholder for when parent-tests can be run as a setup step
(define (run:test run-id run-info key-vals runname keyvallst test-record flags parent-test)
  ;; All these vars might be referenced by the testconfig file reader
  (let* ((test-name    (tests:testqueue-get-testname   test-record))
	 (test-waitons (tests:testqueue-get-waitons    test-record))
	 (test-conf    (tests:testqueue-get-testconfig test-record))
	 (itemdat      (tests:testqueue-get-itemdat    test-record))
	 (test-path    (conc *toppath* "/tests/" test-name)) ;; could use tests:get-testconfig here ...
	 (force        (hash-table-ref/default flags "-force" #f))

	       (if (not parent-test)
		   (debug:print 1 "NOTE: Not starting test " new-test-name " as it is state \"" (test:get-state testdat) 
				"\" and status \"" (test:get-status testdat) "\", use -rerun \"" (test:get-status testdat)
                                "\" or -force to override"))
	       ;; NOTE: No longer be checking prerequisites here! Will never get here unless prereqs are
	       ;;       already met.
	       ;; This would be a great place to do the process-fork
	       (if (not (launch-test test-id run-id run-info key-vals runname test-conf keyvallst test-name test-path itemdat flags))
		   (begin
		     (print "ERROR: Failed to launch the test. Exiting as soon as possible")
		     (set! *globalexitstatus* 1) ;; 
		     (process-signal (current-process-id) signal/kill))))))
	((KILLED) 
	 (debug:print 1 "NOTE: " new-test-name " is already running or was explictly killed, use -force to launch it."))
	((LAUNCHED REMOTEHOSTSTART RUNNING)  

;; Since many calls to a run require pretty much the same setup 
;; this wrapper is used to reduce the replication of code
(define (general-run-call switchname action-desc proc)
  (let ((runname (args:get-arg ":runname"))
	(target  (if (args:get-arg "-target")
		     (args:get-arg "-target")
		     (args:get-arg "-reqtarg")))
	(th1     #f))
    (cond
     ((not target)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the target with -target")
      (exit 3))
     ((not runname)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the run name with :runname runname")
      (exit 3))
     (else
      (let ((db   #f)
	    (keys #f))


	(if (not (setup-for-run))
	    (begin 
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(if (args:get-arg "-server")
	    (open-run-close server:start db (args:get-arg "-server")))
 	    ;; (if (not (or (args:get-arg "-runall")     ;; runall and runtests are allowed to be servers
 	    ;;     	 (args:get-arg "-runtests")))
	    ;;     (client:setup) ;; This is a duplicate startup!!!??? BUG?
	    ;;     ))
	(set! keys (open-run-close db:get-keys db))
	;; have enough to process -target or -reqtarg here
	(if (args:get-arg "-reqtarg")
	    (let* ((runconfigf (conc  *toppath* "/runconfigs.config")) ;; DO NOT EVALUATE ALL 
		   (runconfig  (read-config runconfigf #f #t environ-patt: #f))) 
	      (if (hash-table-ref/default runconfig (args:get-arg "-reqtarg") #f)
		  (keys:target-set-args keys (args:get-arg "-reqtarg") args:arg-hash)

		  (begin
		    (debug:print 0 "ERROR: [" (args:get-arg "-reqtarg") "] not found in " runconfigf)
		    (if db (sqlite3:finalize! db))
		    (exit 1))))
	    (if (args:get-arg "-target")
		(keys:target-set-args keys (args:get-arg "-target" args:arg-hash) args:arg-hash)))
	(if (not (car *configinfo*))
	    (begin
	      (debug:print 0 "ERROR: Attempted to " action-desc " but run area config file not found")
	      (exit 1))
	    ;; Extract out stuff needed in most or many calls
	    ;; here then call proc
	    (let* ((keynames   (map key:get-fieldname keys))
		   (keyvallst  (keys->vallist keys #t)))
	      (proc target runname keys keynames keyvallst)))
	(if th1 (thread-join! th1))
	(if db (sqlite3:finalize! db))
	(set! *didsomething* #t))))))

;;======================================================================
;; Lock/unlock runs
;;======================================================================

	      ;; read configs with tricks turned off (i.e. no system)
	      (test-conf    (if testexists (read-config test-configf #f #f)(make-hash-table))))
	 ;; use the open-run-close instead of passing in db
	 (runs:update-test_meta test-name test-conf)))
     test-names)))

;; This could probably be refactored into one complex query ...
(define (runs:rollup-run keys keyvallst runname user) ;; was target, now keyvallst
  (debug:print 4 "runs:rollup-run, keys: " keys " keyvallst: " keyvallst " :runname " runname " user: " user)
  (let* ((db              #f) ;; (keyvalllst      (keys:target->keyval keys target))
	 (new-run-id      (cdb:remote-run db:register-run #f keys keyvallst runname "new" "n/a" user))
	 (prev-tests      (open-run-close test:get-matching-previous-test-run-records db new-run-id "%" "%"))
	 (curr-tests      (open-run-close db:get-tests-for-run db new-run-id "%/%" '() '()))
	 (curr-tests-hash (make-hash-table)))
    (open-run-close db:update-run-event_time db new-run-id)
    ;; index the already saved tests by testname and itemdat in curr-tests-hash
    (for-each
     (lambda (testdat)

    ;;   2. replace the rollup test with the new *always*
    (for-each 
     (lambda (testdat)
       (let* ((testname  (db:test-get-testname testdat))
	      (item-path (db:test-get-item-path testdat))
	      (full-name (conc testname "/" item-path))
	      (prev-test-dat (hash-table-ref/default curr-tests-hash full-name #f))
	      (test-steps      (open-run-close db:get-steps-for-test db (db:test-get-id testdat)))
	      (new-test-record #f))
	 ;; replace these with insert ... select
	 (apply sqlite3:execute 
		db 
		(conc "INSERT OR REPLACE INTO tests (run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment) "
		      "VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?);")
		new-run-id (cddr (vector->list testdat)))

		    (tasks:task-get-owner  task)
		    flags)
    (tasks:set-state mdb (tasks:task-get-id task) "waiting")))

(define (tasks:rollup-runs db mdb task)
  (let* ((flags (make-hash-table)) 
	 (keys  (db:get-keys db))
	 (keyvallst (keys:target->keyval keys (tasks:task-get-target task))))
    ;; (hash-table-set! flags "-rerun" "NOT_STARTED")
    (print "Starting rollup " task)
    ;; sillyness, just call the damn routine with the task vector and be done with it. FIXME SOMEDAY
    (runs:rollup-run db
		     keys 
		     keyvallst
		     (tasks:task-get-name  task)
		     (tasks:task-get-owner  task))
    (tasks:set-state mdb (tasks:task-get-id task) "waiting")))

[default]
SOMEVAR This should show up in SOMEVAR3




[include #{getenv MT_RUN_AREA_HOME}/common_runconfigs.config]

# #{system echo 'VACKYVAR #{shell pwd}' > $MT_RUN_AREA_HOME/config/$USER.config}
[include ./config/#{getenv USER}.config]


WACKYVAR0 #{get ubuntu/nfs/none CURRENT}
WACKYVAR1 #{scheme (args:get-arg "-target")}

[default/ubuntu/nfs]
WACKYVAR2 #{runconfigs-get CURRENT}