Megatest

    get-run-times
    get-targets
    get-target
    ;; register-run
    get-tests-tags
    get-test-times
    get-tests-for-run
    get-tests-for-run-state-status
    get-test-id
    get-tests-for-runs-mindata
    get-tests-for-run-mindata
    get-run-name-from-id
    get-runs
    simple-get-runs
    get-num-runs

                   ;; RUNS
                   ((get-run-info)                 (apply db:get-run-info dbstruct params))
                   ((get-run-status)               (apply db:get-run-status dbstruct params))
                   ((get-run-state)                (apply db:get-run-state dbstruct params))
                   ((set-run-status)               (apply db:set-run-status dbstruct params))
                   ((set-run-state-status)  			 (apply db:set-run-state-status dbstruct params))
                   ((get-tests-for-run)            (apply db:get-tests-for-run dbstruct params))
                   ((get-tests-for-run-state-status) (apply db:get-tests-for-run-state-status dbstruct params))
                   ((get-test-id)                  (apply db:get-test-id dbstruct params))
                   ((get-tests-for-run-mindata)    (apply db:get-tests-for-run-mindata dbstruct params))
                   ;; ((get-tests-for-runs-mindata)   (apply db:get-tests-for-runs-mindata dbstruct params))
                   ((get-runs)                     (apply db:get-runs dbstruct params))
                   ((simple-get-runs)              (apply db:simple-get-runs dbstruct params))
                   ((get-num-runs)                 (apply db:get-num-runs dbstruct params))
                   ((get-runs-cnt-by-patt)         (apply db:get-runs-cnt-by-patt dbstruct params))

(define (common:get-num-cpus remote-host)
  (let* ((actual-host (or remote-host (get-host-name))))
    (or (common:get-cached-info actual-host "num-cpus" age: (+ 2592000 (random 3600))) ;; hosts had better not be changing the number of cpus too often!
	(let* ((proc   (lambda ()
			 (let loop ((numcpu 0)
				    (inl    (read-line)))
			   (if (eof-object? inl)
			       (begin
				 (common:write-cached-info actual-host "num-cpus" numcpu)
				 numcpu)
			       (if (> numcpu 0)
				   numcpu
				   #f) ;; if zero return #f so caller knows that things are not working
			       (loop (if (string-match "^processor\\s+:\\s+\\d+$" inl)
					 (+ numcpu 1)
					 numcpu)
				     (read-line))))))
	       (result (if remote-host
			   (with-input-from-pipe 
			       (conc "ssh " remote-host " cat /proc/cpuinfo")
			     proc)
			   (with-input-from-file "/proc/cpuinfo" proc))))
	  (common:write-cached-info actual-host "num-cpus" result)
	  (if (> result 0)(common:write-cached-info actual-host "num-cpus" result))
	  result))))

;; wait for normalized cpu load to drop below maxload
;;
(define (common:wait-for-normalized-load maxload msg remote-host)
(define (common:wait-for-normalized-load maxload msg remote-host #!optional (rem-tries 5))
  (let ((num-cpus (common:get-num-cpus remote-host)))
    (if num-cpus
    (common:wait-for-cpuload maxload num-cpus 15 msg: msg remote-host: remote-host)))
	(common:wait-for-cpuload maxload num-cpus 15 msg: msg remote-host: remote-host)
	(begin
	  (thread-sleep! (random 60)) ;; we failed to get num cpus. wait a bit and try again
	  (if (> rem-tries 0)
	      (common:wait-for-normalized-load maxload msg remote-host (- rem-tries 1))
	      #f)))))

;; DO NOT CALL THIS DIRECTLY. It is called from common:wait-for-normalized-load
;;
(define (common:wait-for-cpuload maxload-in numcpus-in waitdelay #!key (count 1000) (msg #f)(remote-host #f)(force-maxload #f))
  (let* ((loadavg (common:get-cpu-load remote-host))
	 (numcpus (if (<= 1 numcpus-in) ;; not possible to have zero.  If we get 1, it's possible that we got the previous default, and we should check again
		      (common:get-num-cpus remote-host)

  ((tests-by-name (make-hash-table)) : hash-table) ;; hash of testfullname => testdat
  key-vals
  ((last-update   0)                 : number)    ;; last query to db got records from before last-update
  ((last-db-time  0)                 : number)    ;; last timestamp on megatest.db
  ((data-changed  #f)                : boolean)   
  ((run-data-offset  0)              : number)      ;; get only 100 items per call, set back to zero when received less than 100 items
  (db-path #f))

;; for the new runs view lets build up a few new record types and then consolidate later
;;
;; this is a two level deep pipeline for the incoming data:
;;   sql query data ==> filters ==> data for display
;;
(defstruct dboard:rdat
  ;; view related items
  (runnum    0) ;; which column we are processing, index into runsbynum, we sweep across all these runs then start over
  (leftcol   0) ;; number of the leftmost visible column
  (toprow    0) ;; topmost visible row
  (numcols  24) ;; number of columns visible
  (numrows  20) ;; number of rows visible
  
  ;; data from sql db
  (keys       (rmt:get-keys))         ;; to be removed when targets handling is refactored
  (runs       (make-sparse-vector))   ;; id => runrec
  (runsbynum  (make-vector 100 #f))   ;; vector num => runrec 
  (targ-runid (make-hash-table))      ;; area/target/runname => run-id  ;; not sure this will be needed
  (tests      (make-hash-table))      ;; test[/itempath] => list of test rec

  ;; run sql filters 
  (targ-sql-filt        "%")
  (runname-sql-filt     "%")
  (run-state-sql-filt   "%")
  (run-status-sql-filt  "%")

  ;; test sql filter
  (testname-sql-filt    "%")
  (itempath-sql-filt    "%")
  (test-state-sql-filt  "%")
  (test-status-sql-filt "%")

  ;; other sql related fields
  (last-updates (make-sparse-vector 0))  ;; run-id -> timestamp of the last update from sql db, set to zero on any field changes

  ;; filtered data
  (cols  (make-sparse-vector))   ;; columnnum => run-id
  (tests (make-hash-table))      ;; test[/itempath] => (vector columnnum => test rec)

  ;; various
  (prev-run-ids  '())            ;; push previously looked at runs on this
  (view-changed #f)

  ;; widgets
  (runs-tree #f)                 ;; 
  )

(define (dboard:rdat-push-run-id rdat run-id)
  (dboard:rdat-prev-run-ids-set! rdat (cons run-id (dboard:rdat-prev-run-ids rdat))))

(defstruct dboard:runrec
  id
  target  ;; a/b/c...
  tdef    ;; for future use
  )
     
(defstruct dboard:testrec
  id
  runid
  testname  ;; test[/itempath]
  state
  status
  start-time
  duration
  )

;; register dboard:rundat with BBpp
;; this is used by BBpp (Brandon's pretty printer) to convert dboard:rundat into a composition of lists that pp will handle
(hash-table-set! *BBpp_custom_expanders_list* RUNDAT:
                 (cons dboard:rundat?
                       (lambda (tabdat-item)
                         (filter

	 (tests-draw-state (make-hash-table)) ;; use for keeping state of the test canvas
	 (test-patterns-textbox  #f))
    (hash-table-set! tests-draw-state 'first-time #t)
    ;; (hash-table-set! tests-draw-state 'scalef 1)
    (tests:get-full-data test-names test-records '() all-tests-registry)
    (set! sorted-testnames (tests:sort-by-priority-and-waiton test-records))
    
    ;; refer to (dboard:tabdat-keys tabdat), (dboard:tabdat-dbkeys tabdat) for keys
    ;; refer to (dboard:tabcodat-keys tabdat), (dboard:tabdat-dbkeys tabdat) for keys
    (let* ((result
	    (iup:vbox
	     (dcommon:command-execution-control tabdat)
	     (iup:split
	      #:orientation "VERTICAL" ;; "HORIZONTAL"
	      #:value 200
	      ;; 

 ;;	 (dboard:tabdat-logs-textbox-set! tabdat logs-tb)
 ;;	 logs-tb))

;; browse runs as a tree. Used in both "Runs" tab and
;; in the runs control panel.
;;
(define (dboard:runs-tree-browser commondat tabdat)
  (let* (
	 (txtbox (iup:textbox #:action (lambda (val a b)
					 (debug:catch-and-dump
					  (lambda ()
					    ;; for the Runs view we put the list of keyvals into tabdat target
					    ;; for the Run Controls we put then update the run-command
					    (if b (dboard:tabdat-target-set! tabdat (string-split b "/")))
					    (dashboard:update-run-command tabdat))
					  "command-testname-selector tb action"))
			      #:value (dboard:test-patt->lines
				       (dboard:tabdat-test-patts-use tabdat))
			      #:expand "HORIZONTAL"
			      ;; #:size "10x30"
			      ))
  (let* ((txtbox (iup:textbox
		  #:action (lambda (val a b)
			     (debug:catch-and-dump
			      (lambda ()
				;; for the Runs view we put the list
				;; of keyvals into tabdat target for
				;; the Run Controls we put then update
				;; the run-command
				(if b (dboard:tabdat-target-set! tabdat
								 (string-split b "/")))
				(dashboard:update-run-command tabdat))
			      "command-testname-selector tb action"))
		  #:value (dboard:test-patt->lines
			   (dboard:tabdat-test-patts-use tabdat))
		  #:expand "HORIZONTAL"
		  ;; #:size "10x30"
		  ))
	 (tb
          (iup:treebox
           #:value 0
           #:title "Runs"     ;;  was #:name -- iup 3.19 changed
			      ;;  this... "Changed: [DEPRECATED
           #:title "Runs" ;;  was #:name -- iup 3.19 changed this... "Changed: [DEPRECATED REMOVED] removed the old attribute NAMEid from IupTree to avoid conflict with the common attribute NAME. Use the TITLEid attribute."
			      ;;  REMOVED] removed the old attribute
			      ;;  NAMEid from IupTree to avoid
			      ;;  conflict with the common attribute
			      ;;  NAME. Use the TITLEid attribute."
           #:expand "YES"
           #:addexpanded "YES"
           #:size "10x"
           #:selection-cb
           (lambda (obj id state)
             (debug:catch-and-dump
              (lambda ()
                (let* ((run-path (tree:node->path obj id))
                       (run-id    (tree-path->run-id tabdat (cdr run-path))))
                  ;; (dboard:tabdat-view-changed-set! tabdat #t) ;; ?? done below when run-id is a number
                  (dboard:tabdat-target-set! tabdat (cdr run-path)) ;; (print "run-path: " run-path)
		  (iup:attribute-set! txtbox "VALUE" (string-intersperse (cdr run-path) "/"))
                  ;; (dboard:tabdat-view-changed-set! tabdat #t) ;; ??
                  ;; done below when run-id is a number
                  (dboard:tabdat-target-set! tabdat (cdr run-path)) ;; (print
								    ;; "run-path:
								    ;; "
								    ;; run-path)
		  (iup:attribute-set! txtbox "VALUE"
				      (string-intersperse (cdr run-path) "/"))
		  (dashboard:update-run-command tabdat)
                  (dboard:tabdat-layout-update-ok-set! tabdat #f)
                  (if (number? run-id)
                      (begin
                        ;; capture last two in tabdat.
                        (dboard:tabdat-prev-run-id-set!
                         tabdat
                         (dboard:tabdat-curr-run-id tabdat))
                        (dboard:tabdat-curr-run-id-set! tabdat run-id)
                        (dboard:tabdat-view-changed-set! tabdat #t))
                      (debug:print-error 5 *default-log-port* "tree-path->run-id returned non-number " run-id))))
              "treebox"))
           ;; (print "path: " (tree:node->path obj id) " run-id: " run-id)
           )))
    (dboard:tabdat-runs-tree-set! tabdat tb)
    (iup:detachbox
     (iup:vbox 
      txtbox
      tb
      ))))

;; browse runs as a tree. Used in both "Runs" tab and
;; in the runs control panel.
;;
;;  THIS IS THE NEW ONE
;;
(define (dboard:runs-tree-new-browser commondat rdat)
  (let* ((txtbox (iup:textbox
		  #:action (lambda (val a b)
			     (debug:catch-and-dump
			      (lambda ()
				;; for the Runs view we put the list
				;; of keyvals into tabdat target for
				;; the Run Controls we put then update
				;; the run-command
				(if b (dboard:rdat-targ-sql-filt-set! rdat
								 (string-split b "/")))
				#;(dashboard:update-run-command tabdat))
			      "command-testname-selector tb action"))
		  ;; #:value (dboard:test-patt->lines  ;; This seems like it was wrong, BUG in code where it was copied from?
	          ;;		   (dboard:tabdat-test-patts-use tabdat))
		  #:expand "HORIZONTAL"
		  ;; #:size "10x30"
		  ))
	 (tb
          (iup:treebox
           #:value 0
           #:title "Runs"     ;;  was #:name -- iup 3.19 changed
			      ;;  this... "Changed: [DEPRECATED
			      ;;  REMOVED] removed the old attribute
			      ;;  NAMEid from IupTree to avoid
			      ;;  conflict with the common attribute
			      ;;  NAME. Use the TITLEid attribute."
           #:expand "YES"
           #:addexpanded "YES"
           #:size "10x"
           #:selection-cb
           (lambda (obj id state)
             (debug:catch-and-dump
              (lambda ()
                (let* ((run-path (tree:node->path obj id))
                       (run-id    (new-tree-path->run-id rdat (cdr run-path))))
                  ;; (dboard:tabdat-view-changed-set! tabdat #t) ;; ??
                  ;; done below when run-id is a number
                  (dboard:rdat-targ-sql-filt-set! rdat (cdr run-path)) ;; (print
								    ;; "run-path:
								    ;; "
								    ;; run-path)
		  (iup:attribute-set! txtbox "VALUE"
				      (string-intersperse (cdr run-path) "/"))
		  #;(dashboard:update-run-command tabdat)
                  #;(dboard:tabdat-layout-update-ok-set! tabdat #f)
                  (if (number? run-id)
                      (begin
                        ;; capture last two in tabdat.
                        (dboard:rdat-push-run-id rdat run-id)
			(dboard:rdat-view-changed-set! rdat #t))
                      (debug:print-error 5 *default-log-port* "tree-path->run-id returned non-number " run-id))))
              "treebox"))
           ;; (print "path: " (tree:node->path obj id) " run-id: " run-id)
           )))
    (dboard:rdat-runs-tree-set! rdat tb)
    (iup:detachbox
     (iup:vbox 
      txtbox))))
      txtbox
      tb
      ))))

;;======================================================================
;; R U N   C O N T R O L S
;;======================================================================
;;
;; A gui for launching tests
;;

;;
;; display and manage a single run at a time

(define (tree-path->run-id tabdat path)
  (if (not (null? path))
      (hash-table-ref/default (dboard:tabdat-path-run-ids tabdat) path #f)
      #f))

(define (new-tree-path->run-id rdat path)
  (if (not (null? path))
      (hash-table-ref/default (dboard:rdat-path-run-ids tabdat) path #f)
      #f))

;; (define (dboard:get-tests-dat tabdat run-id last-update)
;;   (let* ((access-mode     (dboard:tabdat-access-mode tabdat))
;;          (tdat (if run-id (db:dispatch-query access-mode rmt:get-tests-for-run db:get-tests-for-run
;;                                              run-id 
;; 					     (hash-table-ref/default (dboard:tabdat-searchpatts tabdat) "test-name" "%/%")
;; 					     (hash-table-keys (dboard:tabdat-state-ignore-hash tabdat))  ;; '()

				      (debug:print 6 *default-log-port* "(dboard:tabdat-start-run-offset tabdat) " (dboard:tabdat-start-run-offset tabdat) " maxruns: " maxruns ", val: " val " oldmax: " oldmax)
				      (iup:attribute-set! obj "MAX" (* maxruns 10))))
		#:expand "HORIZONTAL"
		#:max (* 10 (max (hash-table-size (dboard:tabdat-allruns-by-id tabdat)) 10))
		#:min 0
		#:step 0.01))

;; make-simple-run                   procedure (target3772 id3773 runname3774 state3775 status3776 owner3777 event_time3778)
;; rmt:simple-get-runs               procedure (runpatt1001 count1002 offset1003 target1004)
;; simple-run-event_time             procedure (x3834)
;; simple-run-event_time-set!        procedure (x3830 val3831)
;; simple-run-id                     procedure (x3794)
;; simple-run-id-set!                procedure (x3790 val3791)
;; simple-run-owner                  procedure (x3826)
;; simple-run-owner-set!             procedure (x3822 val3823)
;; simple-run-runname                procedure (x3802)
;; simple-run-runname-set!           procedure (x3798 val3799)
;; simple-run-state                  procedure (x3810)
;; simple-run-state-set!             procedure (x3806 val3807)
;; simple-run-status                 procedure (x3818)
;; simple-run-status-set!            procedure (x3814 val3815)
;; simple-run-target                 procedure (x3786)
;; simple-run-target-set!            procedure (x3782 val3783)
;; simple-run?                       procedure (x3780)


;;======================================================================
;; Extracting the data to display for runs
;;
;; This needs to be re-entrant such that it does one column per call
;; on the zeroeth call update runs data
;; on each subsequent call update one run (configurable - could do two, three ... or update until tdelta exceeded
;; on last run reset to zeroeth
;;
;;   1. select with run filters; area, target, runname, runstate, runstatus, starttime, duration
;;       - put this information into two data structures:
;;         a. hash of area/target/runname => runstruct #< ordernun, id, area, target, runname, state,
;;                                                        status, starttime, duration, non-deleted testcount>
;;            ordernum reflects order as received from sql query
;;         b. sparsevec of id => runstruct
;;   2. for each run in runshash ordered by ordernum do:
;;         retrieve data since last update for that run
;;         if there is a deleted test - retrieve full data
;;         if there are non-deleted tests register this run in the columns sparsevec
;;         if this is the zeroeth column regenerate the rows sparsevec
;;         if this column is in the visible zone update visible cells
;;
;; Other factors:
;;   1. left index handling:
;;       - add test/itempaths to left index as discovered, re-order and
;;         update row -> test/itempath mapping on each read run
;;======================================================================

;; runs is <vec header runs>
;;   get ALL runs info
;;   update rdat-targ-run-id
;;   update rdat-runs
;;
(define (dashboard:update-runs-data rdat)
  (let* ((tb               (dboard:rdat-runs-tree rdat))
	 (targ-sql-filt    (dboard:rdat-targ-sql-filt    rdat))
	 (runname-sql-filt (dboard:rdat-runname-sql-filt rdat))
	 (state-sql-filt   (dboard:rdat-run-state-sql-filt   rdat))
	 (status-sql-filt  (dboard:rdat-run-status-sql-filt  rdat))
	 ;; Use (db:get-value-by-header (db:get-header runinfo)(db:get-rows runinfo))
	 (data             (rmt:simple-get-runs runname-sql-filt #f #f targ-sql-filt #f))
	 (numruns          (length data)))
    ;; store in the runsbynum vector
    (dboard:rdat-runsbynum-set! rdat (list->vector data))
    ;; update runs       id              => runrec
    ;; update targ-runid target/runname  => run-id
    (for-each
     (lambda (runrec)
       (let* ((run-id (simple-run-id runrec))
	      (full-targ-runname (conc (simple-run-target runrec) "/"
				       (simple-run-runname runrec))))
	 (debug:print 0 *default-log-port* "Update run  " run-id)
	 (sparse-vector-set! (dboard:rdat-runs rdat) run-id runrec)
	 (hash-table-set! (dboard:rdat-targ-runid rdat) full-targ-runname run-id)
	 ))
     data)
    numruns))

;; NOTE: runnum is NOT the run-id, it is a pointer into the runsbynum vector
;;
(define (dashboard:update-run-data runnum rdat)
  (let* ((curr-time            (current-seconds))
	 (runrec               (vector-ref (dboard:rdat-runsbynum rdat) runnum))
	 (run-id               (simple-run-id runrec))
	 (last-update          (sparse-vector-ref (dboard:rdat-last-updates rdat) run-id))
	 ;; filters
	 (testname-sql-filt    (dboard:rdat-testname-sql-filt    rdat))
	 ;; (itempath-sql-filt    (dboard:rdat-itempath-sql-filt    rdat))
	 (test-state-sql-filt  (dboard:rdat-test-state-sql-filt  rdat))  ;; not used yet
	 (test-status-sql-filt (dboard:rdat-test-status-sql-filt rdat))  ;; not used yet
	 (tests                (rmt:get-tests-for-run-state-status run-id
						      testname-sql-filt
						      last-update                          ;; last-update
						      )))
    (sparse-vector-set! (dboard:rdat-last-updates rdat) run-id (- curr-time 1))
    (debug:print 0 *default-log-port* "Got " (length tests) " tests for run-id " run-id " testname-sql-filt " testname-sql-filt " and last-update " last-update) 
    (length tests)))

(define (new-runs-updater commondat rdat)
  (let* ((runnum           (dboard:rdat-runnum          rdat))
	 (start-time       (current-milliseconds))
	 (tot-runs         #f))
    (if (eq? runnum 0)(dashboard:update-runs-data rdat))
    (set! tot-runs (vector-length (dboard:rdat-runsbynum rdat)))
    (let loop ((rn   runnum))
      (if (and (< (- (current-milliseconds) start-time) 500)
	       (< rn tot-runs))
	  (let* ((newrn (if (>= runnum (vector-length (dboard:rdat-runsbynum rdat)))
			    0 ;; start over
			    (+ rn 1)))) ;; (+ runnum 1)))
	    (dashboard:update-run-data rn rdat)
	    (dboard:rdat-runnum-set! rdat newrn)
	    (if (> newrn 0)
		(loop newrn)))))
    (if (>=  (dboard:rdat-runnum rdat) tot-runs)
	(dboard:rdat-runnum-set! rdat 0))
    ;; (dboard:rdat-runnum-set! rdat rn))) ;; not needed as it is set above
    ;; (dboard:rdat-last-update-set! rdat (- (current-seconds) 10))
    ;;    	 (tree:add-node tb "Runs" (string-split full-targ-runname "/"))
    '()))

(define (dboard:runs-new-matrix commondat rdat)
  (iup:matrix
   #:alignment1 "ALEFT"
   ;; #:expand "YES" ;; "HORIZONTAL"
   #:scrollbar "YES"
   #:numcol 10
   #:numlin 20
   #:numcol-visible 5 ;; (min 8)
   #:numlin-visible 1
   #:click-cb
   (lambda (obj row col status)
     (let* ((cell (conc row ":" col)))
       #f))
   ))
	 
(define (make-runs-view commondat rdat tab-num)
  ;; register an updater
  (dboard:commondat-add-updater
   commondat
   (lambda ()
     (new-runs-updater commondat rdat))
   tab-num: tab-num)

  (iup:vbox
   (iup:split
    #:orientation "VERTICAL" ;; "HORIZONTAL"
    #:value 100
    (dboard:runs-tree-new-browser commondat rdat)
    (dboard:runs-new-matrix commondat rdat)
    )))

(define (make-dashboard-buttons commondat) ;;  runs-sum-dat new-view-dat)
  (let* ((stats-dat       (dboard:tabdat-make-data))
	 (runs-dat        (dboard:tabdat-make-data))
	 (runs2-dat       (make-dboard:rdat)) ;; (dboard:tabdat-make-data))
	 (onerun-dat      (dboard:tabdat-make-data)) ;; name for run-summary structure 
	 (runcontrols-dat (dboard:tabdat-make-data))
	 (runtimes-dat    (dboard:tabdat-make-data))
	 (nruns           (dboard:tabdat-numruns runs-dat))
	 (ntests          (dboard:tabdat-num-tests runs-dat))
	 (keynames        (dboard:tabdat-dbkeys runs-dat))
	 (nkeys           (length keynames))

					res))
				    keynames)))))
    (let loop ((testnum  0)
	       (res      '()))
      (cond
       ((>= testnum ntests)
	;; now lftlst will be an hbox with the test keys and the test name labels
	(set! lftlst
	      (append lftlst
		      (list (iup:hbox
	(set! lftlst (append lftlst (list (iup:hbox  #:expand "HORIZONTAL"
						     (iup:valuator #:valuechanged_cb (lambda (obj)
										       (let ((val (string->number (iup:attribute obj "VALUE")))
											     (oldmax  (string->number (iup:attribute obj "MAX")))
											     (newmax  (* 10 (length (dboard:tabdat-all-test-names runs-dat)))))
											 (dboard:commondat-please-update-set! commondat #t)
											 (dboard:tabdat-start-test-offset-set! runs-dat (inexact->exact (round (/ val 10))))
											 (debug:print 6 *default-log-port* "(dboard:tabdat-start-test-offset runs-dat) " (dboard:tabdat-start-test-offset runs-dat) " val: " val " newmax: " newmax " oldmax: " oldmax)
											 (if (< val 10)
											     (iup:attribute-set! obj "MAX" newmax))
											 ))
								   #:expand "VERTICAL" 
								   #:orientation "VERTICAL"
								   #:min 0
								   #:step 0.01)
						     (apply iup:vbox (reverse res)))))))
			     #:expand "HORIZONTAL"
			     (iup:valuator
			      #:valuechanged_cb (lambda (obj)
						  (let ((val (string->number (iup:attribute obj "VALUE")))
							(oldmax  (string->number (iup:attribute obj "MAX")))
							(newmax  (* 10 (length (dboard:tabdat-all-test-names runs-dat)))))
						    (dboard:commondat-please-update-set! commondat #t)
						    (dboard:tabdat-start-test-offset-set! runs-dat (inexact->exact (round (/ val 10))))
						    (debug:print 6 *default-log-port* "(dboard:tabdat-start-test-offset runs-dat) "
								 (dboard:tabdat-start-test-offset runs-dat) " val: " val
								 " newmax: " newmax " oldmax: " oldmax)
						    (if (< val 10)
							(iup:attribute-set! obj "MAX" newmax))
						    ))
			      #:expand "VERTICAL" 
			      #:orientation "VERTICAL"
			      #:min 0
			      #:step 0.01)
			     (apply iup:vbox (reverse res)))))))
       (else
	(let ((labl  (iup:button "" ;; the testname labels
				 #:flat "YES" 
				 #:alignment "ALEFT"
					; #:image img1
					; #:impress img2
				 #:size  (conc cell-width btn-height)

			    (apply iup:hbox (reverse hdrlst))
			    (apply iup:hbox (reverse bdylst))
			    (dashboard:runs-horizontal-slider runs-dat))))
			 controls
			 ))
	     (views-cfgdat (common:load-views-config))
	     (additional-tabnames '())
	     (tab-start-num       5)   ;; DON'T FORGET TO UPDATE THIS WHEN CHANGING THE STANDARD TABS BELOW
	     (tab-start-num       6)   ;; DON'T FORGET TO UPDATE THIS WHEN CHANGING THE STANDARD TABS BELOW
	     ;; (data (dboard:tabdat-init (make-d:data)))
	     (additional-views 	;; process views-dat
	      (let ((tab-num tab-start-num)
		    (result  '()))
		(for-each
		 (lambda (view-name)
		   (debug:print 0 *default-log-port* "Adding view " view-name)

							(tabdat  (dboard:common-get-tabdat commondat tab-num: tab-num)))
               
						   (dboard:commondat-please-update-set! commondat #t)
						   (dboard:tabdat-layout-update-ok-set! tabdat #t)))
					       "tabchangepos"))
			  (dashboard:summary commondat stats-dat tab-num: 0)
			  runs-view
			  (make-runs-view commondat runs2-dat 2)
			  (dashboard:runs-summary commondat onerun-dat tab-num: 2)
			  (dashboard:runs-summary commondat onerun-dat tab-num: 3)
			  ;; (dashboard:new-view db data new-view-dat tab-num: 3)
			  (dashboard:run-controls commondat runcontrols-dat tab-num: 3)
			  (dashboard:run-times commondat runtimes-dat tab-num: 4)
			  (dashboard:run-controls commondat runcontrols-dat tab-num: 4)
			  (dashboard:run-times commondat runtimes-dat tab-num: 5)
			  ;; (dashboard:runs-summary commondat onerun-dat tab-num: 4)
			  additional-views)))
	;; (set! (iup:callback tabs tabchange-cb:) (lambda (a b c)(print "SWITCHED TO TAB: " a " " b " " c)))
	(iup:attribute-set! tabs "TABTITLE0" "Summary")
	(iup:attribute-set! tabs "TABTITLE1" "Runs")
	(iup:attribute-set! tabs "TABTITLE2" "Run Summary")
	(iup:attribute-set! tabs "TABTITLE3" "Run Control")
	(iup:attribute-set! tabs "TABTITLE4" "Run Times")
	(iup:attribute-set! tabs "TABTITLE2" "Runs2")
	(iup:attribute-set! tabs "TABTITLE3" "Run Summary")
	(iup:attribute-set! tabs "TABTITLE4" "Run Control")
	(iup:attribute-set! tabs "TABTITLE5" "Run Times")
	;; (iup:attribute-set! tabs "TABTITLE3" "New View")
	;; (iup:attribute-set! tabs "TABTITLE4" "Run Control")

	;; set the tab names for user added tabs
	(for-each
	 (lambda (tab-info)
	   (iup:attribute-set! tabs (conc "TABTITLE" (car tab-info)) (cdr tab-info)))

       fres))))

(define (dashboard:runs-tab-updater commondat tab-num)
  (debug:catch-and-dump 
   (lambda ()
     (let* ((tabdat (dboard:common-get-tabdat commondat tab-num: tab-num))
	    (dbkeys (dboard:tabdat-dbkeys tabdat)))
       ;;(print "RA => calling runs-tab-updater with commondat " commondat " tab-num " tab-num)
       ;;(tabdat-values tabdat) ;;RA added 
       ;; (pp (dboard:tabdat->alist tabdat))
       ;; (if (dashboard:database-changed? commondat tabdat context-key: 'runs-rundat)      
       (dashboard:do-update-rundat tabdat)
       ;;(debug:print-info 13 *default-log-port* "dashboard:runs-tab-updater")
       ;;(inspect tabdat)

       (let ((uidat (dboard:commondat-uidat commondat)))
	 ;;(print "RA => Calling update-buttons with tabdat : " tabdat " uidat " uidat)
	 (update-buttons tabdat uidat (dboard:tabdat-numruns tabdat) (dboard:tabdat-num-tests tabdat)))
       ))
   "dashboard:runs-tab-updater"))

;;======================================================================
;; The heavy lifting starts here
;;======================================================================

	(dboard:commondat-uidat-set! commondat (make-dashboard-buttons commondat))
	(dboard:commondat-curr-tab-num-set! commondat 0)
	(dboard:commondat-add-updater 
	 commondat 
	 (lambda ()
	   (dashboard:runs-tab-updater commondat 1))
	 tab-num: 1)
	(dboard:commondat-add-updater 
	 commondat 
	 (lambda ()
	   (dashboard:runs-tab-updater commondat 1))
	 tab-num: 2)
	(iup:callback-set! *tim*
			   "ACTION_CB"
			   (lambda (time-obj)
			     (let ((update-is-running #f))
			     (mutex-lock! (dboard:commondat-update-mutex commondat))
			     (set! update-is-running (dboard:commondat-updating commondat))
			     (if (not update-is-running)

           #f
           #t)))))

;; given a launch delay (minimum time from last launch) return amount of time to wait
;;
;; (define (db:launch-delay-left dbstruct run-id launch-delay)
  


(define (db:get-status-from-final-status-file run-dir)
  (let (
       (infile (conc run-dir "/.final-status")))

       ;; first verify we are able to write the output file
       (if (not (file-read-access? infile))
          (begin 
	        (debug:print 0 *default-log-port* "ERROR: cannot read " infile)
          (debug:print 0 *default-log-port* "ERROR: run-dir is " run-dir)
          #f
          )
          (with-input-from-file infile read-lines)
       )
  )
)




;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));

(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
          ;; The default running-deadtime is 720 seconds = 12 minutes.
          ;; "(running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))" = 200 + (2 * (200 + 30 + 30))
         (deadtime-trim (or ovr-deadtime (configf:lookup-number *configdat* "setup" "deadtime")))
         (server-start-allowance 200)
         (server-overloaded-budget 200)
         (launch-monitor-off-time (or (configf:lookup-number *configdat* "setup" "test-stats-update-period") 30))
         (launch-monitor-on-time-budget 30)
         (launch-monitor-period (+ launch-monitor-off-time launch-monitor-on-time-budget server-overloaded-budget))
         (remotehoststart-deadtime-default (+ server-start-allowance server-overloaded-budget 30))
         (remotehoststart-deadtime (or deadtime-trim remotehoststart-deadtime-default))
         (running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))
         (running-deadtime (or deadtime-trim running-deadtime-default)) ;; two minutes (30 seconds between updates, this leaves 3x grace period)
         )
    (debug:print-info 4  *default-log-port* "running-deadtime = " running-deadtime)
    (debug:print-info 4  *default-log-port* "deadtime-trim = " deadtime-trim)

    (db:with-db 
     dbstruct #f #f
     (lambda (db)
       ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
       ;;
       ;; HOWEVER: this code in run:test seems to work fine
       ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)

              (begin
                (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
                (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
              (begin
                (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))
                (debug:print-info 0 *default-log-port* "Found old test in RUNNING state, test-id=" test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time" run-duration="run-duration))))
        db
        
        "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING');"
        run-id running-deadtime)
        run-id running-deadtime) ;; default time 720 seconds

       
       (sqlite3:for-each-row 
        (lambda (test-id run-dir uname testname item-path event-time run-duration)
          (if (and (equal? uname "n/a")
                   (equal? item-path "")) ;; this is a toplevel test
              ;; what to do with toplevel? call rollup?
              (begin
                (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
                (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
              (begin
                (debug:print-info 0 *default-log-port* "Found old test in REMOTEHOSTSTART state, test-id=" test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time" run-duration="run-duration)
                (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted)))))
        db
        "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('REMOTEHOSTSTART');"
        run-id remotehoststart-deadtime)
        run-id remotehoststart-deadtime) ;; default time 230 seconds.

       ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
       ;;
       ;; (db:delay-if-busy dbdat)
       (sqlite3:for-each-row
        (lambda (test-id run-dir uname testname item-path)
          (if (and (equal? uname "n/a")

              ;;      		    incompleted))
              (min-incompleted-ids (map car incompleted)) ;; do 'em all
              (all-ids             (append min-incompleted-ids (map car oldlaunched))))
         (if (> (length all-ids) 0)
             (begin
               (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as DEAD")
               (for-each
                (lambda (test-id)
                  (db:set-state-status-and-roll-up-items dbstruct run-id test-id 'foo "COMPLETED" "DEAD" "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead."))
                  ;;(db:test-set-state-status dbstruct run-id test-id "COMPLETED" "DEAD" "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")) ;; fix for one aspect of Randy's ticket 1405717332 ;; TODO - fix problem where test goes to COMPLETED/DEAD while in progress, only later to go to COMPLETED/PASS.  ref ticket 220546828
                all-ids))))))))
                  (lambda (test-id)
                    (let* (
                      (run-dir (db:test-get-rundir-from-test-id dbstruct run-id test-id))
                      (result (db:get-status-from-final-status-file run-dir)))
                    (if (and (list? result) (> (length result) 1) (equal? "PASS" (cadr result)) (equal? "COMPLETED" (car result))) 
                      (begin
                        (debug:print 0 *default-log-port* "INFO: test " test-id " actually passed, so marking PASS not DEAD")
                        (db:set-state-status-and-roll-up-items dbstruct run-id test-id 'foo "COMPLETED" "PASS" "Test stopped responding but it has PASSED; marking it PASS in the DB.")
                      )
                      (begin
                      (debug:print 0 *default-log-port* "INFO: test " test-id " final state/status is not COMPLETED/PASS. It is " result)
                      (db:set-state-status-and-roll-up-items dbstruct run-id test-id 'foo "COMPLETED" "DEAD" "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")
                      )
                     )
                    )
                  )
                  all-ids)
             )
         )
       )
     )
   )
 )
)

;; ALL REPLACED BY THE BLOCK ABOVE
;;
;; 	    (sqlite3:execute 
;; 	     db
;; 	     (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN (" 
;; 		   (string-intersperse (map conc all-ids) ",")

		       (lambda (key)
			 (set! res (cons key res)))
		       db
		       "SELECT fieldname FROM keys ORDER BY id DESC;")))
	(set! *db-keys* res)
	res)))

;; extract index number given a header/data structure
(define (db:get-index-by-header header field)
  (list-index (lambda (x)(equal? x field)) header))

;; look up values in a header/data structure
(define (db:get-value-by-header row header field)
  (if (or (null? header) (not row))
      #f
      (let loop ((hed (car header))
                 (tal (cdr header))
                 (n   0))

(define-record simple-run target id runname state status owner event_time)
(define-record-printer (simple-run x out)
  (fprintf out "#,(simple-run ~S ~S ~S ~S)"
	   (simple-run-target x) (simple-run-id x) (simple-run-runname x) (time->string (seconds->local-time (simple-run-event_time x) ))))

;; simple get-runs
;;
(define (db:simple-get-runs dbstruct runpatt count offset target)
(define (db:simple-get-runs dbstruct runpatt count offset target last-update)
    (let* ((res       '())
	   (keys       (db:get-keys dbstruct))
	   (runpattstr (db:patt->like "runname" runpatt))
	   (remfields  (list "id" "runname" "state" "status" "owner" "event_time"))
	   (targstr    (string-intersperse keys "||'/'||"))
	   (keystr     (conc targstr " AS target,"
			     (string-intersperse remfields ",")))
	   (qrystr     (conc "SELECT " keystr " FROM runs WHERE (" runpattstr ") " ;; runname LIKE ? "
			     ;; Generate: " AND x LIKE 'keypatt' ..."
			     " AND target LIKE '" target "'"
			     " AND state != 'deleted' ORDER BY event_time DESC "
			     " AND state != 'deleted' "
			     (if (number? last-update)
				 (conc " AND last_update >= " last-update)
				 "")
			     " ORDER BY event_time DESC "
			     (if (number? count)
				 (conc " LIMIT " count)
				 "")
			     (if (number? offset)
				 (conc " OFFSET " offset)
				 ""))))
				 "")))
	   )
    (debug:print-info 11 *default-log-port* "db:get-runs START qrystr: " qrystr " target: " target " offset: " offset " limit: " count)
    (db:with-db dbstruct #f #f
		(lambda (db)		
		  (sqlite3:for-each-row
		   (lambda (target id runname state status owner event_time)
		     (set! res (cons (make-simple-run target id runname state status owner event_time) res)))
		   db

	  (vector-ref inrec 2) ;; testname
	  (vector-ref inrec 4) ;; state
	  (vector-ref inrec 5) ;; status
	  -1 "" -1 -1 "" "-" 
	  (vector-ref inrec 3) ;; item-path
	  -1 "-" "-"))

(define (db:get-tests-for-run-state-status dbstruct run-id testpatt)
#;(define (db:get-tests-for-run-state-status dbstruct run-id testpatt)
  (let* ((res            '())
	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT id,testname,item_path,state,status FROM tests WHERE run_id=? " 
				(if tests-match-qry (conc " AND (" tests-match-qry ") ") ""))))
    (debug:print-info 8 *default-log-port* "db:get-tests-for-run qry=" qry)
    (db:with-db dbstruct run-id #f
		(lambda (db)
		  (sqlite3:for-each-row
		   (lambda (id testname item-path state status)
		     ;;                      id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
		     (set! res (cons (vector id run-id testname state status -1         ""     -1      -1       ""    "-"  item-path -1           "-"         "-") res)))
		   db 
		   qry
		   run-id)))
    res))

(define (db:get-tests-for-run-state-status dbstruct run-id testpatt #!optional (last-update 0))
  (let* ((res            '())
	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT id,testname,item_path,state,status,event_time,run_duration FROM tests WHERE run_id=? " 
				" AND last_update > ? "
				(if tests-match-qry (conc " AND (" tests-match-qry ") ") "")
				)))
    (debug:print-info 8 *default-log-port* "db:get-tests-for-run qry=" qry)
    (db:with-db dbstruct run-id #f
		(lambda (db)
		  (sqlite3:fold-row
		   (lambda (res id testname item-path state status event-time run-duration)
		     ;;            id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
		     (cons (vector id run-id testname state status event-time  ""     -1      -1       ""    "-"  item-path run-duration  "-"         "-") res))
		   '()
		   db 
		   qry
		   run-id
		   (or last-update 0))))))

(define (db:get-testinfo-state-status dbstruct run-id test-id)
  (let ((res            #f))
    (db:with-db dbstruct run-id #f
		(lambda (db)
		  (sqlite3:for-each-row
		   (lambda (run-id testname item-path state status)

  (let* ((stepname       (car ezstep))  ;; do stuff to run the step
	 (stepinfo       (cadr ezstep))
	;; (let ((info (cadr ezstep)))
	;; 		   (if (proc? info) "" info)))
	;; (stepproc       (let ((info (cadr ezstep)))
	;; 		   (if (proc? info) info #f)))
	 (stepparts      (string-match (regexp "^(\\{([^\\}\\{]*)\\}\\s*|)(.*)$") stepinfo))
	 (stepparams     (if (and (list? stepparts)
				  (> (length stepparts) 1))
			     (list-ref stepparts 2)
	 (stepparams     (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each
			     #f)) ;; for future use, {VAR=1,2,3}, run step for each
	 (paramparts     (if (string? stepparams)
			     (map (lambda (x)(string-split x "=")) (string-split-fields "[^;]*=[^;]*" stepparams))
			     '()))
	 (subrun         (alist-ref "subrun" paramparts equal?))
	 (stepcmd        (if (and (list? stepparts)
				  (> (length stepparts) 2))
	 (stepcmd        (list-ref stepparts 3))
			     (list-ref stepparts 3)
			     (conc "# error, no command for step "stepname)))
	 (script         "") ; "#!/bin/bash\n") ;; yep, we depend on bin/bash FIXME!!!\
	 (logpro-file    (conc stepname ".logpro"))
	 (html-file      (conc stepname ".html"))
	 (dat-file       (conc stepname ".dat"))
	 (tconfig-logpro (configf:lookup testconfig "logpro" stepname))
	 (logpro-used    (common:file-exists? logpro-file)))

	  ;; We are about to actually kick off the test
	  ;; so this is a good place to remove the records for 
	  ;; any previous runs
	  ;; (db:test-remove-steps db run-id testname itemdat)
	  ;; now is also a good time to write the .testconfig file
	  (let* ((tconfig-fname   (conc work-area "/.testconfig"))
		 (tconfig-tmpfile (conc tconfig-fname ".tmp"))
		 (tconfig         (tests:get-testconfig test-name item-path tconfigreg #t force-create: #t))) ;; 'return-procs)))
		 (tconfig         (tests:get-testconfig test-name item-path tconfigreg #t force-create: #t)) ;; 'return-procs)))
		 (scripts (configf:get-section tconfig "scripts")))
	    ;; create .testconfig file
	    (configf:write-alist tconfig tconfig-tmpfile)
	    (file-move tconfig-tmpfile tconfig-fname #t))
	    (file-move tconfig-tmpfile tconfig-fname #t)
	    (delete-file* ".final-status")

	    ;; extract scripts from testconfig and write them to files in test run dir
	    (for-each
	     (lambda (scriptdat)
	       (match scriptdat
		      ((name content)
		       (with-output-to-file name
			 (lambda ()
			   (print content)
			   (change-file-mode name (bitwise-ior perm/irwxg perm/irwxu)))))
		      (else
		       (debug:print-info 0 "Invalid script definiton found in [scripts] section of testconfig. \"" scriptdat "\""))))
	     scripts))
	  ;; 
	  (let* ((m            (make-mutex))
		 (kill-job?    #f)
		 (exit-info    (make-launch:einf pid: #t exit-status: #t exit-code: #t rollup-status: 0)) ;; pid exit-status exit-code (i.e. process was successfully run) rollup-status
		 (job-thread   #f)
		 ;; (keep-going   #t)
		 (misc-flags   (let ((ht (make-hash-table)))

				      (if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
				     ((eq? (launch:einf-rollup-status exit-info) 3) "CHECK")
				     ((eq? (launch:einf-rollup-status exit-info) 4) "WAIVED")
				     ((eq? (launch:einf-rollup-status exit-info) 5) "ABORT")
				     ((eq? (launch:einf-rollup-status exit-info) 6) "SKIP")
				     (else "FAIL")))) ;; (db:test-get-status testinfo)))
		    (debug:print-info 1 *default-log-port* "Test exited in state=" (db:test-get-state testinfo) ", setting state/status based on exit code of " (launch:einf-exit-status exit-info) " and rollup-status of " (launch:einf-rollup-status exit-info))
   
        ;; Leave a .final-status file for each sub-test
        (tests:save-final-status run-id test-id)

		    (tests:test-set-status! run-id 
					    test-id 
					    new-state
					    new-status
					    (args:get-arg "-m") #f)
		    ;; need to update the top test record if PASS or FAIL and this is a subtest
		    ;; NO NEED TO CALL set-state-status-and-roll-up-items HERE, THIS IS DONE IN set-state-status-and-roll-up-items called by tests:test-set-status!
		    ))
	      ;; for automated creation of the rollup html file this is a good place...
	      (if (not (equal? item-path ""))
		  (tests:summarize-items run-id test-id test-name #f))
		      (tests:summarize-items run-id test-id test-name #f))
	      (tests:summarize-test run-id test-id)  ;; don't force - just update if no
        ;; Leave a .final-status file for the top level test
        (tests:save-final-status run-id test-id)
	      (rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id)))
	    (mutex-unlock! m)
            (launch:end-of-run-check run-id )
	    (debug:print 2 *default-log-port* "Output from running " fullrunscript ", pid " (launch:einf-pid exit-info) " in work area " 
			 work-area ":\n====\n exit code " (launch:einf-exit-code exit-info) "\n" "====\n")
	    (if (not (launch:einf-exit-status exit-info))
		(exit 4))))

      (debug:print 0 *default-log-port* "INFO: attemptnum in rmt:send-receive is " attemptnum))
    
  (cond
   ((> attemptnum 2) (thread-sleep! 0.05))
   ((> attemptnum 10) (thread-sleep! 0.5))
   ((> attemptnum 20) (thread-sleep! 1)))
  (if (and (> attemptnum 5) (= 0 (modulo attemptnum 15)))  
    (begin (rmt:start-server rid) (thread-sleep! 3))) 
    (begin (server:run *toppath*) (thread-sleep! 3))) 
  
  
  ;;DOT digraph megatest_state_status {
  ;;DOT   ranksep=0;
  ;;DOT   // rankdir=LR;
  ;;DOT   node [shape="box"];
  ;;DOT "rmt:send-receive" -> MUTEXLOCK;

  ;; (if (number? run-id)
  (rmt:send-receive 'get-tests-for-run run-id (list run-id testpatt states statuses offset limit not-in sort-by sort-order qryvals last-update mode)))
  ;;    (begin
  ;;	(debug:print-error 0 *default-log-port* "rmt:get-tests-for-run called with bad run-id=" run-id)
  ;;	(print-call-chain (current-error-port))
  ;;	'())))

(define (rmt:get-tests-for-run-state-status run-id testpatt last-update)
  (rmt:send-receive 'get-tests-for-run-state-status run-id (list run-id testpatt last-update)))

;; get stuff via synchash 
(define (rmt:synchash-get run-id proc synckey keynum params)
  (rmt:send-receive 'synchash-get run-id (list run-id proc synckey keynum params)))

(define (rmt:get-tests-for-run-mindata run-id testpatt states status not-in)
  (rmt:send-receive 'get-tests-for-run-mindata run-id (list run-id testpatt states status not-in)))
  

(define (rmt:delete-old-deleted-test-records)
  (rmt:send-receive 'delete-old-deleted-test-records #f '()))

(define (rmt:get-runs runpatt count offset keypatts)
  (rmt:send-receive 'get-runs #f (list runpatt count offset keypatts)))

(define (rmt:simple-get-runs runpatt count offset target)
  (rmt:send-receive 'simple-get-runs #f (list runpatt count offset target)))
(define (rmt:simple-get-runs runpatt count offset target last-update)
  (rmt:send-receive 'simple-get-runs #f (list runpatt count offset target last-update)))

(define (rmt:get-all-run-ids)
  (rmt:send-receive 'get-all-run-ids #f '()))

(define (rmt:get-prev-run-ids run-id)
  (rmt:send-receive 'get-prev-run-ids #f (list run-id)))

  ;; then files other than *testdat.db*
  (directory-fold 
   (lambda (f x)
     (let ((fullname (conc real-dir "/" f)))
       (if (not (string-search (regexp "testdat.db") f))
	   (runs:recursive-delete-with-error-msg fullname)))
     (+ 1 x))
   0 real-dir)
   0 real-dir #t)
  ;; then the entire directory
  (runs:recursive-delete-with-error-msg real-dir))

;; cleanup often needs to remove all but the last N runs per target
;;
;; target-patts a1/b1/c1,a2/b2/c2 ...
;;
;; This will fail if called with empty target or a bad target (i.e. missing or extra fields)
;;
(define (runs:get-hash-by-target target-patts runpatt)
  (let* ((targets (string-split target-patts ","))
	 (keys    (rmt:get-keys))
	 (res-ht  (make-hash-table))) ;; target -> ( runrecord1 runrecord2 ... )
    (for-each
     (lambda (target-patt)
       (let ((runs     (rmt:simple-get-runs runpatt #f #f target-patt)))
       (let ((runs     (rmt:simple-get-runs runpatt #f #f target-patt #f)))
	 (for-each
	  (lambda (run)
	    (let ((target (simple-run-target run)))
	      (hash-table-set! res-ht target (cons run (hash-table-ref/default res-ht target '())))))
	  runs)))
     targets)
    res-ht))

	 (let* ((run-id    (db:get-value-by-header run header "id"))
		(run-state (db:get-value-by-header run header "state"))
		(run-name  (db:get-value-by-header run header "runname"))
		(tests     (if (not (equal? run-state "locked"))
			       (proc-get-tests run-id)
			       '()))
		(lasttpath "/does/not/exist/I/hope")
    (lastrealpath "/does/not/exist/I/hope")
		(worker-thread #f))
	   (debug:print-info 4 *default-log-port* "runs:operate-on run=" run ", header=" header)
	   (if (not (null? tests))
	       (begin
		 (case action
                   ((kill-runs)
                    (tasks:kill-runner target run-name "%")

                                              (mt:test-set-state-status-by-id run-id (db:test-get-id test) "KILLREQ" "n/a" #f)
                                              (thread-sleep! 1)))
                                        ;; NOTE: This is suboptimal as the testdata will be used later and the state/status may have changed ...
                                        (if (null? tal)
                                            (loop new-test-dat tal)
                                            (loop (car tal)(append tal (list new-test-dat)))))
                                      (begin
                                        (set! lasttpath (db:test-get-rundir new-test-dat)) ;; remember this path for run removal
                                        (if (file-exists? lasttpath) 
                                          (set! lastrealpath (resolve-pathname lasttpath))
                                          (set! lastrealpath lasttpath)
                                        )
                                        (runs:remove-test-directory new-test-dat mode) ;; 'remove-all)

                                        (if (not (null? tal))
                                            (loop (car tal)(cdr tal)))))))
				(rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id)))
                               ((kill-runs)
                                ;; RUNNING -> KILLREQ
                                ;; LAUNCHED,RUNNING,REMOTEHOSTSTART -> NOT STARTED
                                (cond

		     (if worker-thread (thread-join! worker-thread)))
                   (common:join-backgrounded-threads))))
	   ;; remove the run if zero tests remain
	   (if (eq? action 'remove-runs)
	       (let* ((run-id   (db:get-value-by-header run header "id")) ;; NB// masks run-id from above?
                      (remtests (mt:get-tests-for-run run-id #f '("DELETED") '("n/a") not-in: #t)))
		 (if (null? remtests) ;; no more tests remaining
         ;; Remove the last dir from the path.
         ;; And same for the link-resolved path
		     (let* ((dparts  (string-split lasttpath "/"))
			    (runpath (conc "/" (string-intersperse 
						(take dparts (- (length dparts) 1))
						"/"))))
		       (debug:print 1 *default-log-port* "Removing run: " runkey " " (db:get-value-by-header run header "runname") " and related record")
                       (if (not keep-records)
                           (begin
                             (rmt:delete-run run-id)
                             (rmt:delete-old-deleted-test-records)))
                           ;; (rmt:set-var "DELETED_TESTS" (current-seconds))
			      (linkspath (conc "/" (string-intersperse (take dparts (- (length dparts) 1)) "/")))
            (real-dparts (string-split lastrealpath "/"))
			      (realpath (conc "/" (string-intersperse (take real-dparts (- (length real-dparts) 1)) "/")))
            )

            (debug:print 1 *default-log-port* "Removing run: " linkspath)
            (if (not keep-records)
               (begin
                 (debug:print 1 *default-log-port* "Removing DB records for the run.")
                 (rmt:delete-run run-id)
                 (rmt:delete-old-deleted-test-records))
            )
	          (debug:print 1 *default-log-port* "Recursively removing links dir " linkspath)
            (runs:recursive-delete-with-error-msg linkspath)

		       ;; need to figure out the path to the run dir and remove it if empty
		       ;;    (if (null? (glob (conc runpath "/*")))
		       ;;        (begin
		       ;; 	 (debug:print 1 *default-log-port* "Removing run dir " runpath)
		       ;; 	 (system (conc "rmdir -p " runpath))))
            (debug:print 1 *default-log-port* "Recursively removing real dir " realpath)
            (runs:recursive-delete-with-error-msg realpath)

		       )))))
	 ))
     runs)
    ;; (sqlite3:finalize! (db:delay-if-busy tdbdat))
    )
  #t)
  )
#t
)

(define (runs:remove-test-directory test mode) ;; remove-data-only)
  (let* ((run-dir       (db:test-get-rundir test))    ;; run dir is from the link tree
	 (real-dir      (if (common:file-exists? run-dir)
			    ;; (resolve-pathname run-dir)
			    (common:nice-path run-dir)
			    #f))

      ((remove-data-only)(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "CLEANING" "LOCKED" #f))
      ((remove-all)      (mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "REMOVING" "LOCKED" #f))
      ((archive-remove)  (mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "ARCHIVE_REMOVING" #f #f)))
    (debug:print-info 1 *default-log-port* "Attempting to remove " (if real-dir (conc " dir " real-dir " and ") "") " link " run-dir)
    (if (and real-dir 
	     (> (string-length real-dir) 5)
	     (common:file-exists? real-dir)) ;; bad heuristic but should prevent /tmp /home etc.
	(begin ;; let* ((realpath (resolve-pathname run-dir)))
	  (debug:print-info 1 *default-log-port* "Recursively removing " real-dir)
	  (if (common:file-exists? real-dir)
	      (runs:safe-delete-test-dir real-dir)
	      (debug:print 0 *default-log-port* "WARNING: test dir " real-dir " appears to not exist or is not readable")))
	(let* ((realpath (resolve-pathname run-dir)))
	  (debug:print-info 1 *default-log-port* "Recursively removing " realpath)
	  (if (common:file-exists? realpath)
	      (runs:safe-delete-test-dir realpath)
	      (debug:print 0 *default-log-port* "WARNING: test dir " realpath " appears to not exist or is not readable")))
	(if real-dir 
	    (debug:print 0 *default-log-port* "WARNING: directory " real-dir " does not exist")
	    (debug:print 0 *default-log-port* "WARNING: no real directory corrosponding to link " run-dir ", nothing done")))
    (if (symbolic-link? run-dir)
	(begin
	  (debug:print-info 1 *default-log-port* "Removing symlink " run-dir)
	  (handle-exceptions

			   (if (eq? time-a time-b)
			       (< id-a id-b)
			       ;; (string<? (conc (vector-ref a 2))
			       ;;	    (conc (vector-ref b 2)))
			       #f))
		       (string<? (conc time-a)(conc time-b)))))))))


;; Save test state and status in to a file .final-status in the test directory
;;
(define (tests:save-final-status run-id test-id)
  (let* ((test-dat  (rmt:get-test-info-by-id run-id test-id))
	 (out-dir   (db:test-get-rundir test-dat))
	 (status-file  (conc out-dir "/.final-status"))
   )
    ;; first verify we are able to write the output file
    (if (not (file-write-access? out-dir))
	    (debug:print 0 *default-log-port* "ERROR: cannot write .final-status to " out-dir)
	    (let* 
         ((outp      (open-output-file status-file))
	       (status    (db:test-get-status   test-dat))
         (state     (db:test-get-state    test-dat)))
        (fprintf outp "~S\n" state) 
        (fprintf outp "~S\n" status) 
        (close-output-port outp)))))


;; summarize test in to a file test-summary.html in the test directory
;;
(define (tests:summarize-test run-id test-id)
  (let* ((test-dat  (rmt:get-test-info-by-id run-id test-id))
	 (out-dir   (db:test-get-rundir test-dat))
	 (out-file  (conc out-dir "/test-summary.html")))

	       (oup       (open-output-file out-file))
	       (status    (db:test-get-status   test-dat))
	       (color     (common:get-color-from-status status))
	       (logf      (db:test-get-final_logf test-dat))
	       (steps-dat (tests:get-compressed-steps run-id test-id)))
	  ;; (dcommon:get-compressed-steps #f 1 30045)
	  ;; (#("wasting_time" "23:36:13" "23:36:21" "0" "8.0s" "wasting_time.log"))
	  
	
	  (s:output-new
	   oup
	   (s:html
	    (s:title "Summary for " full-name)
	    (s:body 
	     (s:h2 "Summary for " full-name)
	     (s:table 'cellspacing "0" 'border "1"