Megatest

(use json)
(use ducttape-lib)

(define (get-last-runname area-path target)
  (let* ((run-data     (with-input-from-pipe (conc "megatest -list-runs % -target " target " -fields runs:runname,event_time -dumpmode sexpr -start-dir " area-path)
			 read)))

	  last-name))))

(define (str-first-char->number str)
  (char->integer (string-ref str 0)))
 
;; example of how to set up and write target mappers
;;
(hash-table-set! *target-mappers*
		 'prefix-contour
		 (lambda (target run-name area area-path reason contour mode-patt)
		   (conc contour "/" target)))
(hash-table-set! *target-mappers*
		 'prefix-area-contour
		 (lambda (target run-name area area-path reason contour mode-patt)
		   (conc area "/" contour "/" target)))
  
(hash-table-set! *runname-mappers*
		 'corporate-ww
		 (lambda (target run-name area area-path reason contour mode-patt)
		   (print "corporate-ww called with: target=" target " run-name=" run-name " area=" area " area-path=" area-path " reason=" reason " contour=" contour " mode-patt=" mode-patt)
		   (let* ((last-name   (get-last-runname area-path target))
			  (last-letter (let* ((ch (if (string? last-name)
						      (let ((len (string-length last-name)))
							(substring last-name (- len 1) len))
						      "a"))
					      (chnum (str-first-char->number ch))
					      (a     (str-first-char->number "a"))
					      (z     (str-first-char->number "z")))
					 (if (and (>= chnum a)(<= chnum z))
					     chnum
					     #f)))
			  (next-letter (if last-letter
					   (list->string
					    (list
					     (integer->char
					      (+ last-letter 1)))) ;; surely there is an easier way?
					   "a")))
		     ;; (print "last-name: " last-name " last-letter: " last-letter " next-letter: " next-letter)
		     (conc (seconds->wwdate (current-seconds)) next-letter))))

(hash-table-set! *runname-mappers*
		 'auto
		 (lambda (target run-name area area-path reason contour mode-patt)
		   "auto-eh"))






;; (print "Got here!")

		    GNU GENERAL PUBLIC LICENSE

		       Version 2, June 1991

 Copyright (C) 1989, 1991 Free Software Foundation, Inc.
                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

			    Preamble




  The licenses for most software are designed to take away your
freedom to share and change it.  By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free

software--to make sure the software is free for all its users.  This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it.  (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.)  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.

  To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.


  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have.  You must make sure that they, too, receive or can get the
source code.  And you must show them these terms so they know their
rights.

  We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.

  Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software.  If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original

authors' reputations.











  Finally, any free program is threatened constantly by software
patents.  We wish to avoid the danger that redistributors of a free

program will individually obtain patent licenses, in effect making the
program proprietary.  To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.

  The precise terms and conditions for copying, distribution and
modification follow.

		    GNU GENERAL PUBLIC LICENSE
   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION


  0. This License applies to any program or other work which contains

a notice placed by the copyright holder saying it may be distributed


under the terms of this General Public License.  The "Program", below,
refers to any such program or work, and a "work based on the Program"


means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,



either verbatim or with modifications and/or translated into another


language.  (Hereinafter, translation is included without limitation in




the term "modification".)  Each licensee is addressed as "you".





Activities other than copying, distribution and modification are not





covered by this License; they are outside its scope.  The act of


running the Program is not restricted, and the output from the Program

is covered only if its contents constitute a work based on the


Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.





  1. You may copy and distribute verbatim copies of the Program's





source code as you receive it, in any medium, provided that you




conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the


notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License








along with the Program.




You may charge a fee for the physical act of transferring a copy, and


you may at your option offer warranty protection in exchange for a fee.


  2. You may modify your copy or copies of the Program or any portion

of it, thus forming a work based on the Program, and copy and





distribute such modifications or work under the terms of Section 1




above, provided that you also meet all of these conditions:









    a) You must cause the modified files to carry prominent notices

    stating that you changed the files and the date of any change.









    b) You must cause any work that you distribute or publish, that in



    whole or in part contains or is derived from the Program or any

    part thereof, to be licensed as a whole at no charge to all third






    parties under the terms of this License.



    c) If the modified program normally reads commands interactively

    when run, you must cause it, when started running for such



    interactive use in the most ordinary way, to print or display an
    announcement including an appropriate copyright notice and a
    notice that there is no warranty (or else, saying that you provide
    a warranty) and that users may redistribute the program under
    these conditions, and telling the user how to view a copy of this

    License.  (Exception: if the Program itself is interactive but


    does not normally print such an announcement, your work based on
    the Program is not required to print an announcement.)











These requirements apply to the modified work as a whole.  If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in






themselves, then this License, and its terms, do not apply to those

sections when you distribute them as separate works.  But when you

distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of

this License, whose permissions for other licensees extend to the

entire whole, and thus to each and every part regardless of who wrote it.
















Thus, it is not the intent of this section to claim rights or contest

your rights to work written entirely by you; rather, the intent is to



exercise the right to control the distribution of derivative or
collective works based on the Program.













In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under


the scope of this License.


  3. You may copy and distribute the Program (or a work based on it,


under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:

    a) Accompany it with the complete corresponding machine-readable
    source code, which must be distributed under the terms of Sections
    1 and 2 above on a medium customarily used for software interchange; or,











    b) Accompany it with a written offer, valid for at least three
    years, to give any third party, for a charge no more than your






    cost of physically performing source distribution, a complete





    machine-readable copy of the corresponding source code, to be




    distributed under the terms of Sections 1 and 2 above on a medium
    customarily used for software interchange; or,








    c) Accompany it with the information you received as to the offer


    to distribute corresponding source code.  (This alternative is

    allowed only for noncommercial distribution and only if you
    received the program in object code or executable form with such
    an offer, in accord with Subsection b above.)









The source code for a work means the preferred form of the work for






making modifications to it.  For an executable work, complete source



code means all the source code for all modules it contains, plus any


associated interface definition files, plus the scripts used to
control compilation and installation of the executable.  However, as a


special exception, the source code distributed need not include



anything that is normally distributed (in either source or binary

form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.



If distribution of executable or object code is made by offering




access to copy from a designated place, then offering equivalent









access to copy the source code from the same place counts as




distribution of the source code, even though third parties are not



compelled to copy the source along with the object code.


  4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License.  Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.


However, parties who have received copies, or rights, from you under






this License will not have their licenses terminated so long as such






parties remain in full compliance.








  5. You are not required to accept this License, since you have not



signed it.  However, nothing else grants you permission to modify or
distribute the Program or its derivative works.  These actions are
prohibited by law if you do not accept this License.  Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.


  6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the


original licensor to copy, distribute or modify the Program subject to










these terms and conditions.  You may not impose any further






restrictions on the recipients' exercise of the rights granted herein.

You are not responsible for enforcing compliance by third parties to












this License.





  7. If, as a consequence of a court judgment or allegation of patent






infringement or for any other reason (not limited to patent issues),











































conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all.  For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.


It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is



implemented by public license practices.  Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.

This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.


  8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded.  In such case, this License incorporates
the limitation as if written in the body of this License.

  9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

Each version is given a distinguishing version number.  If the Program

specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation.  If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.

  10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission.  For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this.  Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.




			    NO WARRANTY

  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.



  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.










		     END OF TERMS AND CONDITIONS

	    How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA


Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:

    Gnomovision version 69, Copyright (C) year  name of author
    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary.  Here is a sample; alter the names:

  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
  `Gnomovision' (which makes passes at compilers) written by James Hacker.

  <signature of Ty Coon>, 1 April 1989
  Ty Coon, President of Vice

This General Public License does not permit incorporating your program into
proprietary programs.  If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library.  If this is what you want to do, use the GNU Library General
Public License instead of this License.


GNU Free Documentation License
******************************

                        Version 1.1, March 2000
     Copyright (C) 2000 Free Software Foundation, Inc.
     51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
     
     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     written document "free" in the sense of freedom: to assure everyone
     the effective freedom to copy and redistribute it, with or without
     modifying it, either commercially or noncommercially.  Secondarily,
     this License preserves for the author and publisher a way to get
     credit for their work, while not being considered responsible for
     modifications made by others.

     This License is a kind of "copyleft", which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.
     We recommend this License principally for works whose purpose is
     instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work that contains a
     notice placed by the copyright holder saying it can be distributed
     under the terms of this License.  The "Document", below, refers to
     any such manual or work.  Any member of the public is a licensee,
     and is addressed as "you".

     A "Modified Version" of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A "Secondary Section" is a named appendix or a front-matter
     section of the Document that deals exclusively with the
     relationship of the publishers or authors of the Document to the
     Document's overall subject (or to related matters) and contains
     nothing that could fall directly within that overall subject.
     (For example, if the Document is in part a textbook of
     mathematics, a Secondary Section may not explain any mathematics.)
     The relationship could be a matter of historical connection with
     the subject or with related matters, or of legal, commercial,
     philosophical, ethical or political position regarding them.

     The "Invariant Sections" are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in
     the notice that says that the Document is released under this
     License.

     The "Cover Texts" are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.

     A "Transparent" copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, whose contents can be viewed and edited directly
     and straightforwardly with generic text editors or (for images
     composed of pixels) generic paint programs or (for drawings) some
     widely available drawing editor, and that is suitable for input to
     text formatters or for automatic translation to a variety of
     formats suitable for input to text formatters.  A copy made in an
     otherwise Transparent file format whose markup has been designed
     to thwart or discourage subsequent modification by readers is not
     Transparent.  A copy that is not "Transparent" is called "Opaque".

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and
     standard-conforming simple HTML designed for human modification.
     Opaque formats include PostScript, PDF, proprietary formats that
     can be read and edited only by proprietary word processors, SGML
     or XML for which the DTD and/or processing tools are not generally
     available, and the machine-generated HTML produced by some word
     processors for output purposes only.

     The "Title Page" means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, "Title
     Page" means the text near the most prominent appearance of the
     work's title, preceding the beginning of the body of the text.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow
     the conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies of the Document numbering more than
     100, and the Document's license notice requires Cover Texts, you
     must enclose the copies in covers that carry, clearly and legibly,
     all these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the
     title equally prominent and visible.  You may add other material
     on the covers in addition.  Copying with changes limited to the
     covers, as long as they preserve the title of the Document and
     satisfy these conditions, can be treated as verbatim copying in
     other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a
     machine-readable Transparent copy along with each Opaque copy, or
     state in or with each Opaque copy a publicly-accessible
     computer-network location containing a complete Transparent copy
     of the Document, free of added material, which the general
     network-using public has access to download anonymously at no
     charge using public-standard network protocols.  If you use the
     latter option, you must take reasonably prudent steps, when you
     begin distribution of Opaque copies in quantity, to ensure that
     this Transparent copy will remain thus accessible at the stated
     location until at least one year after the last time you
     distribute an Opaque copy (directly or through your agents or
     retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of
     copies, to give them a chance to provide you with an updated
     version of the Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with
     the Modified Version filling the role of the Document, thus
     licensing distribution and modification of the Modified Version to
     whoever possesses a copy of it.  In addition, you must do these
     things in the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of
          previous versions (which should, if there were any, be listed
          in the History section of the Document).  You may use the
          same title as a previous version if the original publisher of
          that version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has less than five).

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document's
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section entitled "History", and its title, and
          add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on
          the Title Page.  If there is no section entitled "History" in
          the Document, create one stating the title, year, authors,
          and publisher of the Document as given on its Title Page,
          then add an item describing the Modified Version as stated in
          the previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in
          the "History" section.  You may omit a network location for a
          work that was published at least four years before the
          Document itself, or if the original publisher of the version
          it refers to gives permission.

       K. In any section entitled "Acknowledgments" or "Dedications",
          preserve the section's title, and preserve in the section all
          the substance and tone of each of the contributor
          acknowledgments and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document,
          unaltered in their text and in their titles.  Section numbers
          or the equivalent are not considered part of the section
          titles.

       M. Delete any section entitled "Endorsements".  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section as "Endorsements" or to
          conflict in title with any Invariant Section.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option
     designate some or all of these sections as invariant.  To do this,
     add their titles to the list of Invariant Sections in the Modified
     Version's license notice.  These titles must be distinct from any
     other section titles.

     You may add a section entitled "Endorsements", provided it contains
     nothing but endorsements of your Modified Version by various
     parties--for example, statements of peer review or that the text
     has been approved by an organization as the authoritative
     definition of a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end
     of the list of Cover Texts in the Modified Version.  Only one
     passage of Front-Cover Text and one of Back-Cover Text may be
     added by (or through arrangements made by) any one entity.  If the
     Document already includes a cover text for the same cover,
     previously added by you or by arrangement made by the same entity
     you are acting on behalf of, you may not add another; but you may
     replace the old one, on explicit permission from the previous
     publisher that added the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination
     all of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections entitled
     "History" in the various original documents, forming one section
     entitled "History"; likewise combine any sections entitled
     "Acknowledgments", and any sections entitled "Dedications".  You
     must delete all sections entitled "Endorsements."

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the
     documents in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow
     this License in all other respects regarding verbatim copying of
     that document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of
     a storage or distribution medium, does not as a whole count as a
     Modified Version of the Document, provided no compilation
     copyright is claimed for the compilation.  Such a compilation is
     called an "aggregate", and this License does not apply to the
     other self-contained works thus compiled with the Document, on
     account of their being thus compiled, if they are not themselves
     derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one
     quarter of the entire aggregate, the Document's Cover Texts may be
     placed on covers that surround only the Document within the
     aggregate.  Otherwise they must appear on covers around the whole
     aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License provided that you also include the
     original English version of this License.  In case of a
     disagreement between the translation and the original English
     version of this License, the original English version will prevail.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided for under this License.  Any other
     attempt to copy, modify, sublicense or distribute the Document is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

 10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     `http://www.gnu.org/copyleft/'.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License "or any later version" applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If
     the Document does not specify a version number of this License,
     you may choose any version ever published (not as a draft) by the
     Free Software Foundation.

ADDENDUM: How to use this License for your documents
----------------------------------------------------

  To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.1
       or any later version published by the Free Software Foundation;
       with the Invariant Sections being LIST THEIR TITLES, with the
       Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
       A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

  If you have no Invariant Sections, write "with no Invariant Sections"
instead of saying which ones are invariant.  If you have no Front-Cover
Texts, write "no Front-Cover Texts" instead of "Front-Cover Texts being
LIST"; likewise for Back-Cover Texts.

  If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.

# make install CSCOPTS='-accumulate-profile -profile-name $(PWD)/profile-ww$(shell date +%V.%u)'
# rm <files>.o ; make install CSCOPTS='-profile' ; ... ;  chicken-profile | less

PREFIX=$(PWD)
CSCOPTS=
INSTALL=install
SRCFILES = common.scm items.scm launch.scm \
   ods.scm runconfig.scm server.scm configf.scm \
   db.scm keys.scm margs.scm megatest-version.scm \
   process.scm runs.scm tasks.scm tests.scm genexample.scm \
   http-transport.scm filedb.scm \
   client.scm synchash.scm daemon.scm mt.scm \
   ezsteps.scm lock-queue.scm sdb.scm \
   rmt.scm api.scm tdb.scm rpc-transport.scm \
   portlogger.scm archive.scm env.scm diff-report.scm cgisetup/models/pgdb.scm

# Eggs to install (straightforward ones)
EGGS=matchable readline apropos base64 regex-literals format regex-case test coops trace csv \
dot-locking posix-utils posix-extras directory-utils hostinfo tcp-server rpc csv-xml fmt \
json md5 awful http-client spiffy uri-common intarweb spiffy-request-vars \
spiffy-directory-listing ssax sxml-serializer sxml-modifications iup canvas-draw sqlite3








GUISRCF  = dashboard-tests.scm dashboard-guimonitor.scm gutils.scm dcommon.scm tree.scm vg.scm


OFILES   = $(SRCFILES:%.scm=%.o)
GOFILES  = $(GUISRCF:%.scm=%.o)



















ADTLSCR=mt_laststep mt_runstep mt_ezstep
HELPERS=$(addprefix $(PREFIX)/bin/,$(ADTLSCR))
DEPLOYHELPERS=$(addprefix deploytarg/,$(ADTLSCR))
MTESTHASH=$(shell fossil info|grep checkout:| awk '{print $$2}')





CSIPATH=$(shell which csi)
CKPATH=$(shell dirname $(shell dirname $(CSIPATH)))
# ARCHSTR=$(shell uname -m)_$(shell uname -r)
# BASH_MACHTYPE=$(shell bash -c "echo \$$MACHTYPE")
# ARCHSTR=$(BASH_MACHTYPE)_$(shell lsb_release -sr)
ARCHSTR=$(shell lsb_release -sr)
# ARCHSTR=$(shell bash -c "echo \$$MACHTYPE")

PNGFILES = $(shell cd docs/manual;ls *png)

all : $(PREFIX)/bin/.$(ARCHSTR) mtest dboard mtut ndboard


mtest: $(OFILES) readline-fix.scm megatest.o
	csc $(CSCOPTS) $(OFILES) megatest.o -o mtest




dboard : $(OFILES) $(GOFILES) dashboard.scm
	csc $(CSCOPTS) $(OFILES) dashboard.scm $(GOFILES) -o dboard

ndboard : newdashboard.scm $(OFILES) $(GOFILES)
	csc $(CSCOPTS) $(OFILES) $(GOFILES) newdashboard.scm -o ndboard



mtut: $(OFILES) mtut.scm




























	csc $(CSCOPTS) $(OFILES) mtut.scm -o mtut






# install documentation to $(PREFIX)/docs
# DOES NOT REBUILD DOCS
#
$(PREFIX)/share/docs/megatest_manual.html : docs/manual/megatest_manual.html
	mkdir -p $(PREFIX)/share/docs
	$(INSTALL) docs/manual/megatest_manual.html $(PREFIX)/share/docs/megatest_manual.html
	for png in $(PNGFILES);do $(INSTALL) docs/manual/$$png $(PREFIX)/share/docs/$$png;done






$(PREFIX)/share/db/mt-pg.sql : mt-pg.sql
	mkdir -p $(PREFIX)/share/db
	$(INSTALL) mt-pg.sql $(PREFIX)/share/db/mt-pg.sql

#multi-dboard : multi-dboard.scm $(OFILES) $(GOFILES)
#	csc $(CSCOPTS) $(OFILES) $(GOFILES) multi-dboard.scm -o multi-dboard


# 
# $(PREFIX)/bin/revtagfsl : utils/revtagfsl.scm
#	csc utils/revtagfsl.scm -o $(PREFIX)/bin/revtagfsl

# Special dependencies for the includes
tests.o db.o launch.o runs.o dashboard-tests.o dashboard-guimonitor.o dashboard-main.o monitor.o dashboard.o  \

archive.o megatest.o : db_records.scm

tests.o runs.o dashboard.o dashboard-tests.o dashboard-main.o  : run_records.scm

db.o ezsteps.o keys.o launch.o megatest.o monitor.o runs-for-ref.o runs.o tests.o : key_records.scm

tests.o tasks.o dashboard-tasks.o : task_records.scm

runs.o : test_records.scm

megatest.o : megatest-fossil-hash.scm

rmt.scm client.scm common.scm configf.scm dashboard-guimonitor.scm dashboard-tests.scm dashboard.scm db.scm dcommon.scm ezsteps.scm fs-transport.scm http-transport.scm index-tree.scm items.scm keys.scm launch.scm megatest.scm monitor.scm mt.scm newdashboard.scm runconfig.scm runs.scm server.scm tdb.scm tests.scm tree.scm : common_records.scm rpc-transport.scm

common_records.scm : altdb.scm




vg.o dashboard.o : vg_records.scm

dcommon.o : run_records.scm













# Temporary while transitioning to new routine
# runs.o : run-tests-queue-classic.scm  run-tests-queue-new.scm




megatest-fossil-hash.scm : $(SRCFILES) megatest.scm *_records.scm
	echo "(define megatest-fossil-hash \"$(MTESTHASH)\")" > megatest-fossil-hash.new
	if ! diff -q megatest-fossil-hash.new megatest-fossil-hash.scm ; then echo copying .new to .scm;cp -f megatest-fossil-hash.new megatest-fossil-hash.scm;fi

$(OFILES) $(GOFILES) : common_records.scm 

%.o : %.scm
	csc $(CSCOPTS) -c $<

$(PREFIX)/bin/.$(ARCHSTR)/mtest : mtest utils/mk_wrapper
	@echo Installing to PREFIX=$(PREFIX)
	$(INSTALL) mtest $(PREFIX)/bin/.$(ARCHSTR)/mtest
	utils/mk_wrapper $(PREFIX) mtest $(PREFIX)/bin/megatest
	chmod a+x $(PREFIX)/bin/megatest

$(PREFIX)/bin/.$(ARCHSTR)/ndboard : ndboard
	$(INSTALL) ndboard $(PREFIX)/bin/.$(ARCHSTR)/ndboard

$(PREFIX)/bin/newdashboard : $(PREFIX)/bin/.$(ARCHSTR)/ndboard utils/mk_wrapper
	utils/mk_wrapper $(PREFIX) ndboard $(PREFIX)/bin/newdashboard
	chmod a+x $(PREFIX)/bin/newdashboard



$(PREFIX)/bin/.$(ARCHSTR)/mtut : mtut
	$(INSTALL) mtut $(PREFIX)/bin/.$(ARCHSTR)/mtut




$(PREFIX)/bin/mtutil : $(PREFIX)/bin/.$(ARCHSTR)/mtut utils/mk_wrapper
	utils/mk_wrapper $(PREFIX) mtut $(PREFIX)/bin/mtutil
	chmod a+x $(PREFIX)/bin/mtutil






# $(PREFIX)/bin/.$(ARCHSTR)/mdboard : multi-dboard
#	$(INSTALL) multi-dboard $(PREFIX)/bin/.$(ARCHSTR)/mdboard

# $(PREFIX)/bin/mdboard : $(PREFIX)/bin/.$(ARCHSTR)/mdboard  utils/mk_wrapper
# 	utils/mk_wrapper $(PREFIX) mdboard $(PREFIX)/bin/mdboard
# 	chmod a+x $(PREFIX)/bin/mdboard


# $(HELPERS) : utils/%

# 	$(INSTALL) $< $@



# 	chmod a+x $@

$(PREFIX)/bin/mt_laststep : utils/mt_laststep
	$(INSTALL) $< $@
	chmod a+x $@

$(PREFIX)/bin/mt_runstep : utils/mt_runstep
	$(INSTALL) $< $@
	chmod a+x $@





$(PREFIX)/bin/mt_ezstep : utils/mt_ezstep
	$(INSTALL) $< $@
	chmod a+x $@

$(PREFIX)/bin/mt_xterm : utils/mt_xterm
	$(INSTALL) $< $@

	$(INSTALL) $< $@
	chmod a+x $@

$(PREFIX)/bin/nbfind : utils/nbfind
	$(INSTALL) $< $@
	chmod a+x $@

$(PREFIX)/bin/loadrunner : utils/loadrunner
	$(INSTALL) $< $@
	chmod a+x $@

# $(PREFIX)/bin/refdb : refdb
# 	$(INSTALL) $< $@
# 	chmod a+x $@

deploytarg/nbfake : utils/nbfake
	$(INSTALL) $< $@
	chmod a+x $@

deploytarg/viewscreen : utils/viewscreen
	$(INSTALL) $< $@
	chmod a+x $@

$(PREFIX)/bin/.$(ARCHSTR)/dboard : dboard $(FILES) utils/mk_wrapper
	utils/mk_wrapper $(PREFIX) dboard $(PREFIX)/bin/dashboard
	chmod a+x $(PREFIX)/bin/dashboard
	$(INSTALL) dboard $(PREFIX)/bin/.$(ARCHSTR)/dboard

install : $(PREFIX)/bin/.$(ARCHSTR) $(PREFIX)/bin/.$(ARCHSTR)/mtest $(PREFIX)/bin/megatest \
          $(PREFIX)/bin/.$(ARCHSTR)/dboard $(PREFIX)/bin/dashboard $(HELPERS) $(PREFIX)/bin/nbfake \

	  $(PREFIX)/bin/nbfind $(PREFIX)/bin/loadrunner $(PREFIX)/bin/viewscreen $(PREFIX)/bin/mt_xterm \

	  $(PREFIX)/share/docs/megatest_manual.html $(PREFIX)/bin/remrun $(PREFIX)/bin/mtutil \


          $(PREFIX)/share/db/mt-pg.sql $(PREFIX)/bin/.$(ARCHSTR)/ndboard $(PREFIX)/bin/newdashboard



$(PREFIX)/bin/.$(ARCHSTR) : 
	mkdir -p $(PREFIX)/bin/.$(ARCHSTR)
	mkdir -p $(PREFIX)/bin/.$(ARCHSTR)/lib

test: tests/tests.scm
	cd tests;csi -I .. -b -n tests.scm

ext-tests/.fslckout : $(MTQA_FOSSIL)
	mkdir -p ext-tests
	cd ext-tests;fossil open --nested $(MTQA_FOSSIL)

$(MTQA_FOSSIL) :
	fossil clone https://www.kiatoa.com/fossils/megatest_qa $(MTQA_FOSSIL)

clean : 
	rm -f $(OFILES) $(GOFILES) megatest dboard dboard.o megatest.o dashboard.o megatest-fossil-hash.* altdb.scm













#======================================================================
# Make the records files
#======================================================================

# vg_records.scm : records.sh
#	./records.sh

#======================================================================
# Deploy section (not complete yet)
#======================================================================

$(DEPLOYHELPERS) : utils/mt_*
	$(INSTALL) $< $@
	chmod a+X $@

deploytarg/apropos.so : Makefile
	chicken-install -p deploytarg -deploy -keep-installed $(EGGS)

#	for i in apropos base64 canvas-draw csv-xml directory-utils dot-locking extras fmt format hostinfo http-client intarweb json md5 message-digest posix posix-extras readline regex regex-case s11n spiffy spiffy-request-vars sqlite3 srfi-1 srfi-18 srfi-69 tcp test uri-common check-errors synch matchable sql-null tcp-server rpc blob-utils string-utils variable-item defstruct uri-generic sendfile opensll openssl lookup-table list-utils stack; do \
#	chicken-install -prefix deploytarg -deploy $$i;done

# deploytarg/libsqlite3.so : 
# 	CSC_OPTIONS="-Ideploytarg -Ldeploytarg" $CHICKEN_INSTALL -prefix deploytarg -deploy sqlite3

deploy : deploytarg/mtest deploytarg/dboard $(DEPLOYHELPERS) deploytarg/nbfake deploytarg/remrun deploytarg/viewsceen deploytarg/nbfind deploytarg/apropos.so

# deploytarg/libiupcd.so : $(CKPATH)/lib/libiupcd.so
# 	for i in iup im cd av call sqlite; do \
# 	  cp $(CKPATH)/lib/lib$$i* deploytarg/ ; \
# 	done
# 	cp $(CKPATH)/include/*.h deploytarg

# puts deployed megatest in directory "megatest"
deploytarg/mtest : $(OFILES) megatest.o deploytarg/apropos.so
	csc -deploy $(CSCOPTS) $(OFILES) megatest.scm -o deploytarg
	mv deploytarg/deploytarg deploytarg/mtest

deploytarg/dboard :  $(OFILES) $(GOFILES) dashboard.scm deploytarg/apropos.so
	csc -deploy $(OFILES) $(GOFILES) dashboard.scm -o deploytarg
	mv deploytarg/deploytarg deploytarg/dboard

# DATASHAREO=configf.o common.o process.o tree.o dcommon.o margs.o launch.o gutils.o db.o synchash.o server.o \
#            megatest-version.o tdb.o ods.o mt.o keys.o
datashare-testing/sd : datashare.scm $(OFILES)
	csc $(CSCOPTS) datashare.scm $(OFILES) -o datashare-testing/sd

datashare-testing/sdat: sharedat.scm $(OFILES)
	csc $(CSCOPTS) sharedat.scm $(OFILES) -o datashare-testing/sdat

sd : datashare-testing/sd
	mkdir -p /tmp/$(USER)/datashare/disk1 /tmp/$(USER)/basepath

xterm : sd
	(export BASEPATH=/tmp/$(USER)/basepath ; export PATH="$(PWD)/datashare-testing:$(PATH)" ; xterm &)

datashare-testing/spublish : spublish.scm $(OFILES)
	csc $(CSCOPTS) spublish.scm $(OFILES) -o datashare-testing/spublish

datashare-testing/sretrieve : sretrieve.scm megatest-version.o margs.o configf.o process.o 
	csc $(CSCOPTS) sretrieve.scm megatest-version.o margs.o configf.o process.o -o datashare-testing/sretrieve

sretrieve/sretrieve : datashare-testing/sretrieve

	csc $(CSCOPTS) -deploy -deployed sretrieve.scm megatest-version.o margs.o configf.o process.o
	chicken-install -keep-installed $(PROXY) -deploy -prefix sretrieve defstruct srfi-18 format sql-de-lite \
             srfi-1 posix regex regex-case srfi-69

# base64 dot-locking \

#             csv-xml z3



#  "(define (toplevel-command . a) #f)"
# if egrep 'version.*3.0' $(shell dirname $(shell dirname $(shell which csi)))/lib/chicken/7/readline.setup-info;then \


readline-fix.scm :
	if [[ $(shell chicken-status | grep readline | awk '{print $4}' | cut -d. -f1) -gt 3 ]];then \
	   echo "(define *use-new-readline* #f)" > readline-fix.scm; \
	else \
	   echo "(define *use-new-readline* #t)" > readline-fix.scm;\
	fi

altdb.scm :
	echo ";; optional alternate db setup" > altdb.scm
	echo "(define *available-db* (make-hash-table))" >> altdb.scm
	if  csi -ne '(use mysql-client)';then \
           echo "(use mysql-client)(hash-table-set! *available-db* 'mysql #t)" >> altdb.scm; \
	fi
	if csi -ne '(use postgresql)';then \
	   echo "(use postgresql)(hash-table-set! *available-db* 'postgresql #t)" >> altdb.scm;\
	fi

portlogger-example : portlogger-example.scm api.o archive.o client.o common.o configf.o daemon.o dashboard-tests.o db.o dcommon.o ezsteps.o filedb.o genexample.o gutils.o http-transport.o items.o keys.o launch.o lock-queue.o margs.o megatest-version.o mt.o ods.o portlogger.o process.o rmt.o rpc-transport.o runconfig.o runs.o sdb.o server.o synchash.o tasks.o tdb.o tests.o tree.o
	csc $(CSCOPTS) portlogger-example.scm api.o archive.o client.o common.o configf.o daemon.o dashboard-tests.o db.o dcommon.o ezsteps.o filedb.o genexample.o gutils.o http-transport.o items.o keys.o launch.o lock-queue.o margs.o megatest-version.o mt.o ods.o portlogger.o process.o rmt.o rpc-transport.o runconfig.o runs.o sdb.o server.o synchash.o tasks.o tdb.o tests.o tree.o

# make install CSCOPTS='-accumulate-profile -profile-name $(PWD)/profile-ww$(shell date +%V.%u)'



















PREFIX=$(PWD)
CSCOPTS= -deploy 
INSTALL=install



SRCFILES = common.scm items.scm launch.scm \
   ods.scm runconfig.scm server.scm configf.scm \
   db.scm keys.scm margs.scm megatest-version.scm \
   process.scm runs.scm tasks.scm tests.scm genexample.scm \
   http-transport.scm filedb.scm \
   client.scm synchash.scm daemon.scm mt.scm \
   ezsteps.scm lock-queue.scm sdb.scm \
   rmt.scm api.scm tdb.scm rpc-transport.scm \
   portlogger.scm archive.scm env.scm




# Eggs to install (straightforward ones)
EGGS=crypt matchable readline apropos base64 regex-literals format regex-case test coops trace csv \
dot-locking posix-utils posix-extras directory-utils hostinfo tcp-server rpc csv-xml fmt \
json md5 awful http-client spiffy uri-common intarweb spiffy-request-vars \
spiffy-directory-listing ssax sxml-serializer sxml-modifications iup canvas-draw sqlite3

GUISRCF  = dashboard-tests.scm dashboard-guimonitor.scm gutils.scm dcommon.scm tree.scm vg.scm

OFILES   = $(SRCFILES:%.scm=%.o)
GOFILES  = $(GUISRCF:%.scm=%.o)







ADTLSCR=mt_laststep mt_runstep mt_ezstep
HELPERS=$(addprefix $(PREFIX)/bin/,$(ADTLSCR))
DEPLOYHELPERS=$(addprefix deploytarg/,$(ADTLSCR))
MTESTHASH=$(shell fossil info|grep checkout:| awk '{print $$2}')

CSIPATH=$(shell which csi)

ARCHSIZE=64_
IMVER=3.11
IUPVER=3.17
KTYPE=26g4
CDVER=5.10

all : $(PREFIX)/bin/.$(ARCHSTR) mtest dboard eggs sqlite matt iup 

mtest: $(OFILES) readline-fix.scm megatest.o
	mkdir -p $(PREFIX)/deploy
	csc $(CSCOPTS) $(OFILES) megatest.o -o $(PREFIX)/deploy/mtest







eggs: $(PREFIX)/deploy/mtest/fmt.so

$(PREFIX)/deploy/mtest/fmt.so:
	chicken-install -deploy -p $(PREFIX)/deploy/mtest base64 format regex-case simple-exceptions typed-records apropos directory-utils md5 spiffy http-client spiffy-request-vars spiffy-directory-listing posix-extras call-with-environment-variables csv typed-records pathname-expand json crypt dot-locking csv-xml z3 sql-de-lite hostinfo rpc directory-utils md5 spiffy http-client spiffy-request-vars spiffy-directory-listing posix-extras call-with-environment-variables rpc fmt










sqlite: $(PREFIX)/deploy/mtest/sqlite3.so

$(PREFIX)/deploy/mtest/sqlite3.so: 
	wget http://www.sqlite.org/2015/sqlite-autoconf-3090200.tar.gz
	tar xfz sqlite-autoconf-3090200.tar.gz
	cd sqlite-autoconf-3090200
	cd sqlite-autoconf-3090200 && ./configure --prefix=`realpath $(PREFIX)/deploy/mtest`
	cd sqlite-autoconf-3090200 && make
	cd sqlite-autoconf-3090200 && make install
	CSC_OPTIONS='-I$(PREFIX)/deploy/mtest/include -L$(PREFIX)/deploy/mtest/' chicken-install -deploy -p $(PREFIX)/deploy/mtest sqlite3

matt:  $(PREFIX)/deploy/mtest/stml.so

$(PREFIX)/deploy/mtest/stml.so: 
	wget -c -O stml.tar.gz 'http://www.kiatoa.com/fossils/stml/tarball?name=stml&uuid=trunk'
	tar -xzf stml.tar.gz
	cd stml && cp install.cfg.template install.cfg
	cd stml && echo "TARGDIR=`realpath $(PREFIX)/deploy/mtest`" > install.cfg
	cd stml && echo "LOGDIR=/tmp/stmlrun" >> install.cfg
	cd stml && echo "SQLITE3=$PREFIX/bin/sqlite3" >> install.cfg
	cd stml && cp requirements.scm.template requirements.scm
	cd stml && make clean
	-cd stml && CSCOPTS="-C -fPIC" make
	cd stml && chicken-install -deploy -p $(PREFIX)/deploy/mtest
	wget -c -O opensrc.tar.gz 'http://www.kiatoa.com/fossils/opensrc/tarball?name=opensrc&uuid=trunk'
	tar -xzf opensrc.tar.gz
	cd opensrc/mutils && chicken-install -deploy -p $(PREFIX)/deploy/mtest
	cd opensrc/dbi    && chicken-install -deploy -p $(PREFIX)/deploy/mtest
	cd opensrc/margs  && chicken-install -deploy -p $(PREFIX)/deploy/mtest






























iup: $(PREFIX)/deploy/mtest/iup.so

$(PREFIX)/deploy/mtest/iup.so:
	wget -c http://www.kiatoa.com/matt/chicken-build/cd/cd-${CDVER}_Linux${KTYPE}_${ARCHSIZE}lib.tar.gz
	wget -c http://www.kiatoa.com/matt/chicken-build/im/im-${IMVER}_Linux${KTYPE}_${ARCHSIZE}lib.tar.gz
	wget -c http://www.kiatoa.com/matt/chicken-build/iup/iup-${IUPVER}_Linux${KTYPE}_${ARCHSIZE}lib.tar.gz
	tar -xzvf cd-${CDVER}_Linux${KTYPE}_${ARCHSIZE}lib.tar.gz -C $(PREFIX)/deploy/mtest/
	tar -xzvf im-${IMVER}_Linux${KTYPE}_${ARCHSIZE}lib.tar.gz -C $(PREFIX)/deploy/mtest/
	tar -xzvf iup-${IUPVER}_Linux${KTYPE}_${ARCHSIZE}lib.tar.gz -C $(PREFIX)/deploy/mtest/
	cp $(PREFIX)/deploy/mtest/ftgl/lib/*/* $(PREFIX)/deploy/mtest/
	wget -c -O ffcall.tar.gz 'http://www.kiatoa.com/fossils/ffcall/tarball?name=ffcall&uuid=trunk'
	tar -xzf ffcall.tar.gz
	cd ffcall && ./configure --prefix=`realpath $(PREFIX)/deploy/mtest/` --enable-shared
	cd ffcall &&  make CC="gcc -fPIC"
	cd ffcall &&  make install
	CSC_OPTIONS="-I$(PREFIX)/deploy/mtest/include -L$(PREFIX)/deploy/mtest" chicken-install -deploy -p $(PREFIX)/deploy/mtest -D no-library-checks -feature disable-iup-web iup
	CSC_OPTIONS="-I$(PREFIX)/deploy/mtest/include -L$(PREFIX)/deploy/mtest" chicken-install -deploy -p $(PREFIX)/deploy/mtest -D no-library-checks canvas-draw	
 
dboard: $(OFILES) $(GOFILES) dashboard.scm
	csc $(CSCOPTS) $(OFILES) dashboard.scm $(GOFILES) -o $(PREFIX)/deploy/mtest/dboard2
	cp $(PREFIX)/deploy/mtest/dboard2/dboard2 $(PREFIX)/deploy/mtest/dboard

ndboard : newdashboard.scm $(OFILES) $(GOFILES)
	csc $(CSCOPTS) $(OFILES) $(GOFILES) newdashboard.scm -o $(PREFIX)/deploy/mtest/newdboard




# install documentation to $(PREFIX)/docs
# DOES NOT REBUILD DOCS
#
$(PREFIX)/share/docs/megatest_manual.html : docs/manual/megatest_manual.html
	mkdir -p $(PREFIX)/share/docs
	$(INSTALL) docs/manual/megatest_manual.html $(PREFIX)/share/docs/megatest_manual.html
	for png in $(PNGFILES);do $(INSTALL) docs/manual/$$png $(PREFIX)/share/docs/$$png;done









#multi-dboard : multi-dboard.scm $(OFILES) $(GOFILES)
#	csc $(CSCOPTS) $(OFILES) $(GOFILES) multi-dboard.scm -o multi-dboard

# 
# $(PREFIX)/bin/revtagfsl : utils/revtagfsl.scm
#	csc utils/revtagfsl.scm -o $(PREFIX)/bin/revtagfsl

	@echo Installing to PREFIX=$(PREFIX)
	$(INSTALL) mtest $(PREFIX)/bin/.$(ARCHSTR)/mtest
	utils/mk_wrapper $(PREFIX) mtest $(PREFIX)/bin/megatest
	chmod a+x $(PREFIX)/bin/megatest

$(PREFIX)/bin/.$(ARCHSTR)/ndboard : ndboard
	$(INSTALL) ndboard $(PREFIX)/bin/.$(ARCHSTR)/ndboard














$(PREFIX)/bin/newdashboard : $(PREFIX)/bin/.$(ARCHSTR)/ndboard utils/mk_wrapper
	utils/mk_wrapper $(PREFIX) ndboard $(PREFIX)/bin/newdashboard
	chmod a+x $(PREFIX)/bin/newdashboard

#$(PREFIX)/bin/.$(ARCHSTR)/mdboard : multi-dboard
#	$(INSTALL) multi-dboard $(PREFIX)/bin/.$(ARCHSTR)/mdboard

	$(INSTALL) $< $@
	chmod a+x $@

$(PREFIX)/bin/loadrunner : utils/loadrunner
	$(INSTALL) $< $@
	chmod a+x $@






# $(PREFIX)/bin/refdb : refdb
# 	$(INSTALL) $< $@
# 	chmod a+x $@

deploytarg/nbfake : utils/nbfake
	$(INSTALL) $< $@
	chmod a+x $@

# install dashboard as dboard so wrapper script can be called dashboard
$(PREFIX)/bin/.$(ARCHSTR)/dboard : dboard $(FILES) utils/mk_wrapper
	utils/mk_wrapper $(PREFIX) dboard $(PREFIX)/bin/dashboard
	chmod a+x $(PREFIX)/bin/dashboard
	$(INSTALL) dboard $(PREFIX)/bin/.$(ARCHSTR)/dboard

install : $(PREFIX)/bin/.$(ARCHSTR) $(PREFIX)/bin/.$(ARCHSTR)/mtest $(PREFIX)/bin/megatest \
          $(PREFIX)/bin/.$(ARCHSTR)/dboard $(PREFIX)/bin/dashboard $(HELPERS) $(PREFIX)/bin/nbfake \
	  $(PREFIX)/bin/nbfind $(PREFIX)/bin/loadrunner $(PREFIX)/bin/viewscreen $(PREFIX)/bin/mt_xterm \
	  $(PREFIX)/share/docs/megatest_manual.html 





$(PREFIX)/bin/.$(ARCHSTR) : 
	mkdir -p $(PREFIX)/bin/.$(ARCHSTR)


test: tests/tests.scm
	cd tests;csi -I .. -b -n tests.scm

ext-tests/.fslckout : $(MTQA_FOSSIL)
	mkdir -p ext-tests
	cd ext-tests;fossil open --nested $(MTQA_FOSSIL)

#======================================================================

$(DEPLOYHELPERS) : utils/mt_*
	$(INSTALL) $< $@
	chmod a+X $@

deploytarg/apropos.so : Makefile


	chicken-install -p deploytarg -deploy -keep-installed $(EGGS)

#	for i in apropos base64 canvas-draw csv-xml directory-utils dot-locking extras fmt format hostinfo http-client intarweb json md5 message-digest posix posix-extras readline regex regex-case s11n spiffy spiffy-request-vars sqlite3 srfi-1 srfi-18 srfi-69 tcp test uri-common check-errors synch matchable sql-null tcp-server rpc blob-utils string-utils variable-item defstruct uri-generic sendfile opensll openssl lookup-table list-utils stack; do \
#	chicken-install -prefix deploytarg -deploy $$i;done

# deploytarg/libsqlite3.so : 
# 	CSC_OPTIONS="-Ideploytarg -Ldeploytarg" $CHICKEN_INSTALL -prefix deploytarg -deploy sqlite3

deploy : deploytarg/mtest deploytarg/dboard $(DEPLOYHELPERS) deploytarg/nbfake deploytarg/viewsceen deploytarg/nbfind deploytarg/apropos.so

# deploytarg/libiupcd.so : $(CKPATH)/lib/libiupcd.so
# 	for i in iup im cd av call sqlite; do \
# 	  cp $(CKPATH)/lib/lib$$i* deploytarg/ ; \
# 	done
# 	cp $(CKPATH)/include/*.h deploytarg

altdb.scm :
	echo ";; optional alternate db setup" > altdb.scm
	echo "(define *available-db* (make-hash-table))" >> altdb.scm
	if  csi -ne '(use mysql-client)';then \
           echo "(use mysql-client)(hash-table-set! *available-db* 'mysql #t)" >> altdb.scm; \
	fi
	if csi -ne '(use postgresql)';then \
	   echo "(use postgresql)(hash-table-set! *available-db* 'postgresql #t)" >> altdb.scm;\
	fi

portlogger-example : portlogger-example.scm api.o archive.o client.o common.o configf.o daemon.o dashboard-tests.o db.o dcommon.o ezsteps.o filedb.o genexample.o gutils.o http-transport.o items.o keys.o launch.o lock-queue.o margs.o megatest-version.o mt.o ods.o portlogger.o process.o rmt.o rpc-transport.o runconfig.o runs.o sdb.o server.o synchash.o tasks.o tdb.o tests.o tree.o
	csc $(CSCOPTS) portlogger-example.scm api.o archive.o client.o common.o configf.o daemon.o dashboard-tests.o db.o dcommon.o ezsteps.o filedb.o genexample.o gutils.o http-transport.o items.o keys.o launch.o lock-queue.o margs.o megatest-version.o mt.o ods.o portlogger.o process.o rmt.o rpc-transport.o runconfig.o runs.o sdb.o server.o synchash.o tasks.o tdb.o tests.o tree.o

=====================================================================
NOTES from looking at branch v1.62-rpc
=====================================================================

*last-db-access* or *db-last-access* ==> which is it to be?
seen in singletest: ERROR: Unrecognised arguments: :first_err This is the first error

INFO: (0) Number non-cached queries 74289
INFO: (0) Average non-cached time   1055.09826488444 ms
INFO: (0) Server shutdown complete. Exiting

Start: 0 at Sun Apr 28 22:18:25 MST 2013
Max:  52 at Sun Apr 28 23:06:59 MST 2013
End:   6 at Sun Apr 28 23:47:51 MST 2013

Megatest 

To build:

1. Install chicken scheme. See utils/Makefile.installall

2. Compile with "make -j install PREFIX=/some/path"

3. To test ....

TODO
====







. Dashboard should resist running from non-homehost




























Migration to inmem db plus per run db
-------------------------------------

. Re-work the dbstruct data structure?
.. Move main.db to global?
.. [ run-id.db inmemdb last-mod last-read last-sync inuse ]
. Re-work all queries to use run-id to dereference server
. Open main.db directly in calls to -runtests etc. No need to talk remote?

;;======================================================================
;; Copyright 2006-2013, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.




;; 

;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR

;;  PURPOSE.



;;======================================================================

(use srfi-69 posix)

(declare (unit api))
(declare (uses rmt))
(declare (uses db))
(declare (uses tasks))

;; allow these queries through without starting a server
;;
(define api:read-only-queries
  '(get-key-val-pairs
    get-var
    get-keys
    get-key-vals
    test-toplevel-num-items
    get-test-info-by-id


    test-get-rundir-from-test-id
    get-count-tests-running-for-testname
    get-count-tests-running
    get-count-tests-running-in-jobgroup
    get-previous-test-run-record
    get-matching-previous-test-run-records
    test-get-logfile-info
    test-get-records-for-index-file
    get-testinfo-state-status
    test-get-top-process-pid
    test-get-paths-matching-keynames-target-new
    get-prereqs-not-met
    get-count-tests-running-for-run-id
    get-run-info
    get-run-status

    get-run-stats

    get-targets
    get-target
    ;; register-run
    get-tests-tags

    get-tests-for-run

    get-test-id
    get-tests-for-runs-mindata

    get-run-name-from-id
    get-runs

    get-num-runs

    get-all-run-ids
    get-prev-run-ids
    get-run-ids-matching-target
    get-runs-by-patt
    get-steps-data
    get-steps-for-test
    read-test-data

    login
    tasks-get-last
    testmeta-get-record
    have-incompletes?
    synchash-get


    ))

(define api:write-queries
  '(
    get-keys-write ;; dummy "write" query to force server start

    ;; SERVERS
    start-server
    kill-server

    ;; TESTS
    test-set-state-status-by-id
    delete-test-records
    delete-old-deleted-test-records
    test-set-state-status
    test-set-top-process-pid
    set-state-status-and-roll-up-items

    update-pass-fail-counts
    top-test-set-per-pf-counts ;; (db:top-test-set-per-pf-counts (db:get-db *db* 5) 5 "runfirst")

    ;; RUNS
    register-run
    set-tests-state-status
    delete-run
    lock/unlock-run
    update-run-event_time
    mark-incomplete

    ;; STEPS
    teststep-set-status!

    ;; TEST DATA
    test-data-rollup
    csv->test-data

    ;; MISC
    sync-inmem->db




    ;; TESTMETA
    testmeta-add-record
    testmeta-update-field

    ;; TASKS
    tasks-add
    tasks-set-state-given-param-key
    ))

;; These are called by the server on recipt of /api calls
;;    - keep it simple, only return the actual result of the call, i.e. no meta info here
;;
;;    - returns #( flag result )
;;
(define (api:execute-requests dbstruct dat)
  (handle-exceptions
   exn
   (let ((call-chain (get-call-chain)))
     (debug:print 0 *default-log-port* "WARNING: api:execute-requests received an exception from peer, dat=" dat)
     (print-call-chain (current-error-port))
     (debug:print 0 *default-log-port* " message: "  ((condition-property-accessor 'exn 'message) exn))       
     (vector #f (vector exn call-chain dat))) ;; return some stuff for debug if an exception happens
   (cond
    ((not (vector? dat))                    ;; it is an error to not receive a vector
     (vector #f (vector #f "remote must be called with a vector")))
    ((> *api-process-request-count* 20) ;; 20)
     (debug:print 0 *default-log-port* "WARNING: api:execute-requests received an overloaded message.")

     (vector #f (vector #f 'overloaded))) ;; the inner vector is what gets returned. nope, don't know why. please refactor!
    (else  
     (let* ((cmd-in            (vector-ref dat 0))
            (cmd               (if (symbol? cmd-in)
				   cmd-in
				   (string->symbol cmd-in)))
            (params            (vector-ref dat 1))
            (start-t           (current-milliseconds))
            (readonly-mode     (dbr:dbstruct-read-only dbstruct))
            (readonly-command  (member cmd api:read-only-queries))
            (writecmd-in-readonly-mode (and readonly-mode (not readonly-command)))





            (res    
             (if writecmd-in-readonly-mode
                 (conc "attempt to run write command "cmd" on a read-only database")
                 (case cmd
                   ;;===============================================
                   ;; READ/WRITE QUERIES
                   ;;===============================================



                   ((get-keys-write)                        (db:get-keys dbstruct)) ;; force a dummy "write" query to force server; for debug in -repl
                   
                   ;; SERVERS
                   ((start-server)                    (apply server:kind-run params))
                   ((kill-server)                     (set! *server-run* #f))

                   ;; TESTS

                   ((test-set-state-status-by-id)     (apply mt:test-set-state-status-by-id dbstruct params))














                   ((delete-test-records)             (apply db:delete-test-records dbstruct params))
                   ((delete-old-deleted-test-records) (apply db:delete-old-deleted-test-records dbstruct params))
                   ((test-set-state-status)           (apply db:test-set-state-status dbstruct params))
                   ((test-set-top-process-pid)        (apply db:test-set-top-process-pid dbstruct params))
                   ((set-state-status-and-roll-up-items) (apply db:set-state-status-and-roll-up-items dbstruct params))

                   ((top-test-set-per-pf-counts)      (apply db:top-test-set-per-pf-counts dbstruct params))
                   ((test-set-archive-block-id)       (apply db:test-set-archive-block-id dbstruct params))

                   ;; RUNS
                   ((register-run)                 (apply db:register-run dbstruct params))
                   ((set-tests-state-status)       (apply db:set-tests-state-status dbstruct params))
                   ((delete-run)                   (apply db:delete-run dbstruct params))
                   ((lock/unlock-run)              (apply db:lock/unlock-run dbstruct params))
                   ((update-run-event_time)        (apply db:update-run-event_time dbstruct params))
                   ((update-run-stats)             (apply db:update-run-stats dbstruct params))
                   ((set-var)                      (apply db:set-var dbstruct params))


                   ((del-var)                      (apply db:del-var dbstruct params))


                   ;; STEPS
                   ((teststep-set-status!)         (apply db:teststep-set-status! dbstruct params))


                   ;; TEST DATA
                   ((test-data-rollup)             (apply db:test-data-rollup dbstruct params))
                   ((csv->test-data)               (apply db:csv->test-data dbstruct params))

                   ;; MISC
                   ((sync-inmem->db)               (let ((run-id (car params)))
                                                     (db:sync-touched dbstruct run-id force-sync: #t)))
                   ((mark-incomplete)              (apply db:find-and-mark-incomplete dbstruct params))



                   ;; TESTMETA
                   ((testmeta-add-record)       (apply db:testmeta-add-record dbstruct params))
                   ((testmeta-update-field)     (apply db:testmeta-update-field dbstruct params))
                   ((get-tests-tags)            (db:get-tests-tags dbstruct))

                   ;; TASKS
                   ((tasks-add)                 (apply tasks:add dbstruct params))   
                   ((tasks-set-state-given-param-key) (apply tasks:set-state-given-param-key dbstruct params))
                   ((tasks-get-last)            (apply tasks:get-last dbstruct params))







                   ;; ARCHIVES
                   ;; ((archive-get-allocations)   
                   ((archive-register-disk)     (apply db:archive-register-disk dbstruct params))
                   ((archive-register-block-name)(apply db:archive-register-block-name dbstruct params))
                   ((archive-allocate-testsuite/area-to-block)(apply db:archive-allocate-testsuite/area-to-block dbstruct block-id testsuite-name areakey))

                   ;;======================================================================
                   ;; READ ONLY QUERIES
                   ;;======================================================================

                   ;; KEYS
                   ((get-key-val-pairs)               (apply db:get-key-val-pairs dbstruct params))

                   ((test-toplevel-num-items)         (apply db:test-toplevel-num-items dbstruct params))
                   ((get-test-info-by-id)	       (apply db:get-test-info-by-id dbstruct params))
                   ((test-get-rundir-from-test-id)    (apply db:test-get-rundir-from-test-id dbstruct params))
                   ((get-count-tests-running-for-testname) (apply db:get-count-tests-running-for-testname dbstruct params))
                   ((get-count-tests-running)         (apply db:get-count-tests-running dbstruct params))
                   ((get-count-tests-running-in-jobgroup) (apply db:get-count-tests-running-in-jobgroup dbstruct params))
                   ;; ((delete-test-step-records)        (apply db:delete-test-step-records dbstruct params))
                   ((get-previous-test-run-record)    (apply db:get-previous-test-run-record dbstruct params))
                   ((get-matching-previous-test-run-records)(apply db:get-matching-previous-test-run-records dbstruct params))
                   ((test-get-logfile-info)           (apply db:test-get-logfile-info dbstruct params))
                   ((test-get-records-for-index-file)  (apply db:test-get-records-for-index-file dbstruct params))
                   ((get-testinfo-state-status)       (apply db:get-testinfo-state-status dbstruct params))
                   ((test-get-top-process-pid)        (apply db:test-get-top-process-pid dbstruct params))
                   ((test-get-paths-matching-keynames-target-new) (apply db:test-get-paths-matching-keynames-target-new dbstruct params))
                   ((get-prereqs-not-met)             (apply db:get-prereqs-not-met dbstruct params))
                   ((get-count-tests-running-for-run-id) (apply db:get-count-tests-running-for-run-id dbstruct params))

                   ((synchash-get)                    (apply synchash:server-get dbstruct params))
                   ((get-raw-run-stats)               (apply db:get-raw-run-stats dbstruct params))


                   ;; RUNS
                   ((get-run-info)                 (apply db:get-run-info dbstruct params))
                   ((get-run-status)               (apply db:get-run-status dbstruct params))

                   ((set-run-status)               (apply db:set-run-status dbstruct params))


                   ((get-tests-for-run)            (apply db:get-tests-for-run dbstruct params))

                   ((get-test-id)                  (apply db:get-test-id dbstruct params))
                   ((get-tests-for-run-mindata)    (apply db:get-tests-for-run-mindata dbstruct params))

                   ((get-runs)                     (apply db:get-runs dbstruct params))

                   ((get-num-runs)                 (apply db:get-num-runs dbstruct params))

                   ((get-all-run-ids)              (db:get-all-run-ids dbstruct))
                   ((get-prev-run-ids)             (apply db:get-prev-run-ids dbstruct params))
                   ((get-run-ids-matching-target)  (apply db:get-run-ids-matching-target dbstruct params))
                   ((get-runs-by-patt)             (apply db:get-runs-by-patt dbstruct params))
                   ((get-run-name-from-id)         (apply db:get-run-name-from-id dbstruct params))
                   ((get-main-run-stats)           (apply db:get-main-run-stats dbstruct params))
                   ((get-var)                      (apply db:get-var dbstruct params))
                   ((get-run-stats)                (apply db:get-run-stats dbstruct params))


                   ;; STEPS
                   ((get-steps-data)               (apply db:get-steps-data dbstruct params))
                   ((get-steps-for-test)           (apply db:get-steps-for-test dbstruct params))


                   ;; TEST DATA
                   ((read-test-data)               (apply db:read-test-data dbstruct params))



                   ;; MISC
                   ((get-latest-host-load)         (apply db:get-latest-host-load dbstruct params))
                   ((have-incompletes?)            (apply db:have-incompletes? dbstruct params))
                   ((login)                        (apply db:login dbstruct params))
                   ((general-call)                 (let ((stmtname   (car params))
                                                         (run-id     (cadr params))
                                                         (realparams (cddr params)))
                                                     (db:general-call dbstruct stmtname realparams)))
                   ((sdb-qry)                      (apply sdb:qry params))
                   ((ping)                         (current-process-id))
		   ((get-changed-record-ids)       (apply db:get-changed-record-ids dbstruct params))
		   
                   ;; TESTMETA
                   ((testmeta-get-record)       (apply db:testmeta-get-record dbstruct params))

                   ;; TASKS 
                   ((find-task-queue-records)   (apply tasks:find-task-queue-records dbstruct params))
		   (else
		    (debug:print 0 *default-log-port* "ERROR: bad api call " cmd)
		    (conc "ERROR: BAD api call " cmd))))))

       
       ;; save all stats
       (let ((delta-t (- (current-milliseconds)
			 start-t)))
	 (hash-table-set! *db-api-call-time* cmd
			  (cons delta-t (hash-table-ref/default *db-api-call-time* cmd '()))))
       (if writecmd-in-readonly-mode




	   (vector #f res)




           (vector #t res)))))))

;; http-server  send-response
;;                 api:process-request
;;                    db:*
;;
;; NB// Runs on the server as part of the server loop
;;
(define (api:process-request dbstruct $) ;; the $ is the request vars proc
  (set! *api-process-request-count* (+ *api-process-request-count* 1))
  (let* ((cmd     ($ 'cmd))
	 (paramsj ($ 'params))
	 (params  (db:string->obj paramsj transport: 'http)) ;; incoming data from the POST (or is it a GET?)
	 (resdat  (api:execute-requests dbstruct (vector cmd params))) ;; process the request, resdat = #( flag result )
	 (success (vector-ref resdat 0))
	 (res     (vector-ref resdat 1))) ;; (vector flag payload), get the payload, ignore the flag (why?)
    (if (not success)
	(debug:print 0 *default-log-port* "ERROR: success flag is #f for " cmd " with params " params))
    (if (> *api-process-request-count* *max-api-process-requests*)
	(set! *max-api-process-requests* *api-process-request-count*))
    (set! *api-process-request-count* (- *api-process-request-count* 1))
    ;; This can be here but needs controls to ensure it doesn't run more than every 4 seconds
    ;; (rmt:dat->json-str

;; Copyright 2006-2014, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.




;; 

;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR

;;  PURPOSE.




;;  strftime('%m/%d/%Y %H:%M:%S','now','localtime')

(use sqlite3 srfi-1 posix regex regex-case srfi-69 dot-locking format md5 message-digest srfi-18)
(import (prefix sqlite3 sqlite3:))

(declare (unit archive))
(declare (uses db))
(declare (uses common))

(include "common_records.scm")
(include "db_records.scm")

(define (archive:main linktree target runname testname itempath options)
  (let ((testdir (conc linktree "/" target "/" runname "/" testname "/" itempatt))
	(flavor  'plain) ;; type of machine to run jobs on
	(maxload 1.5)   ;; max allowed load for this work
	(adisks  (archive:get-archive-disks)))
    ;; get testdir size
    ;;   - hand off du to job mgr
    (if (and (file-exists? testdir)
	     (file-is-writable? testdir))
	(let* ((dused  (jobrunner:run-job 
			flavor  ;; machine type
			maxload ;; max allowed load
			'()     ;; prevars - environment vars to set for the job
			common:get-disk-space-used  ;; if a proc call it, if a string it is a unix command
			(list testdir)))

				  (vector-ref block 2))) ;; disk-path
			       existing-blocks)))
    (or (common:get-disk-with-most-free-space candidate-disks dused)
	(archive:allocate-new-archive-block #f #f #f)))) ;; BROKEN. testname itempath))))

;; allocate a new archive area
;;
(define (archive:allocate-new-archive-block run-area-home testsuite-name dneeded)















  (let* ((adisks    (archive:get-archive-disks))
	 (best-disk (common:get-disk-with-most-free-space adisks dneeded)))
    (if best-disk
	(let* ((bdisk-name    (car best-disk))
	       (bdisk-path    (cdr best-disk))
	       (area-key      (substring (message-digest-string (md5-primitive) run-area-home) 0 5))
	       (bdisk-id      (rmt:archive-register-disk bdisk-name bdisk-path (get-df bdisk-path)))


	       (archive-name  (let ((sec (current-seconds)))
				(conc (time->string (seconds->local-time sec) "%Y")
				      "_q" (seconds->quarter sec) "/"
				      testsuite-name "_" area-key)))
	       (archive-path  (conc bdisk-path "/" archive-name))
	       (block-id      (rmt:archive-register-block-name bdisk-id archive-path)))
	  ;;   (allocation-id (rmt:archive-allocate-testsuite/area-to-block block-id testsuite-name area-key)))
	  (if block-id ;; (and block-id allocation-id)
	      (cons block-id archive-path)




	      #f))


	#f)))

;; archive - run bup
;;
;; 1. create the bup dir if not exists
;; 2. start the du of each directory
;; 3. gen index
;; 4. save
;;
(define (archive:run-bup archive-command run-id run-name tests rp-mutex bup-mutex)
  ;; move the getting of archive space down into the below block so that a single run can 
  ;; allocate as needed should a disk fill up
  ;;



  (let* ((min-space    (string->number (or (configf:lookup *configdat* "archive" "minspace") "1000")))
	 (archive-info (archive:allocate-new-archive-block *toppath* (common:get-testsuite-name) min-space))
	 (archive-dir  (if archive-info (cdr archive-info) #f))
	 (archive-id   (if archive-info (car archive-info) -1))

	 (disk-groups  (make-hash-table))
	 (test-groups  (make-hash-table)) ;; these two (disk and test groups) could be combined nicely

	 (bup-exe      (or (configf:lookup *configdat* "archive" "bup") "bup"))
	 (compress     (or (configf:lookup *configdat* "archive" "compress") "9"))
	 (linktree     (common:get-linktree))) ;; (configf:lookup *configdat* "setup" "linktree")))










    (if (not archive-dir) ;; no archive disk found, this is fatal
	(begin
	  (debug:print 0 *default-log-port* "FATAL: No archive disks found. Please add disks with at least " min-space " MB space to the [archive-disks] section of megatest.config")
	  (debug:print 0 *default-log-port* "       use [archive] minspace to specify minimum available space")
	  (debug:print 0 *default-log-port* "   disks: " (string-intersperse (map cadr (archive:get-archive-disks)) "\n         "))
	  (exit 1))
	(debug:print-info 0 *default-log-port* "Using path " archive-dir " for archiving"))


    ;; from the test info bin the path to the test by stem
    ;;
    (for-each
     (lambda (test-dat)
       (let* ((item-path         (db:test-get-item-path test-dat))
	      (test-name         (db:test-get-testname  test-dat))
	      (test-id           (db:test-get-id        test-dat))
	      (run-id            (db:test-get-run_id    test-dat))
	      (target            (string-intersperse (map cadr (rmt:get-key-val-pairs run-id)) "/"))
	      
	      (toplevel/children (and (db:test-get-is-toplevel test-dat)
				      (> (rmt:test-toplevel-num-items run-id test-name) 0)))
	      (test-partial-path (conc target "/" run-name "/" (db:test-make-full-name test-name item-path)))
	      ;; note the trailing slash to get the dir inspite of it being a link
	      (test-path         (conc linktree "/" test-partial-path))
	      (mutex-lock! rp-mutex)
	      (test-physical-path (if (file-exists? test-path) 
				      (common:real-path test-path)
				      #f))
	      (mutex-unlock! rp-mutex)
	      (partial-path-index (if test-physical-path (substring-index test-partial-path test-physical-path) #f))
	      (test-base         (if (and partial-path-index 
					  test-physical-path )
				     (substring test-physical-path
						0
						partial-path-index)
				     #f)))




	 


























 	 (cond
	  (toplevel/children
	   (debug:print 0 *default-log-port* "WARNING: cannot archive " test-name " with id " test-id " as it is a toplevel test with children"))

	  ((not (file-exists? test-path))
	   (debug:print 0 *default-log-port* "WARNING: Cannot archive " test-name "/" item-path " as path " test-path " does not exist"))

	  (else
	   (debug:print 0 *default-log-port*
			"From test-dat=" test-dat " derived the following:\n"
			"test-partial-path  = " test-partial-path "\n"
			"test-path          = " test-path "\n"
			"test-physical-path = " test-physical-path "\n"
			"partial-path-index = " partial-path-index "\n"
			"test-base          = " test-base)

	   (hash-table-set! disk-groups test-base (cons test-physical-path (hash-table-ref/default disk-groups test-base '())))
	   (hash-table-set! test-groups test-base (cons test-dat (hash-table-ref/default test-groups test-base '())))




	   test-path))))
     tests)

    ;; for each disk-group
    (for-each 
     (lambda (disk-group)





       (debug:print 0 *default-log-port* "Processing disk-group " disk-group)
       (let* ((test-paths (hash-table-ref disk-groups disk-group))



	      ;; ((string-intersperse (map cadr (rmt:get-key-val-pairs 1)) "-")









	      (bup-init-params  (list "-d" archive-dir "init"))
	      (bup-index-params (append (list "-d" archive-dir "index") test-paths))
	      (bup-save-params  (append (list "-d" archive-dir "save" ;; (conc "--strip-path=" linktree)
					      (conc "-" compress) ;; or (conc "--compress=" compress)
					      "-n" (conc (common:get-testsuite-name) "-" run-id)
					      (conc "--strip-path=" disk-group))

					test-paths))
	      (print-prefix      #f)) ;; "Running: ")) ;; change to #f to turn off printing
	 (if (not (file-exists? archive-dir))
	     (create-directory archive-dir #t))
	 (if (not (file-exists? (conc archive-dir "/HEAD")))
	     (begin
	       ;; replace this with jobrunner stuff enventually
	       (debug:print-info 0 *default-log-port* "Init bup in " archive-dir)
	       ;; (mutex-lock! bup-mutex)
	       (run-n-wait bup-exe params: bup-init-params print-cmd: print-prefix)
	       ;; (mutex-unlock! bup-mutex)
	       ))
	 (debug:print-info 0 *default-log-port* "Indexing data to be archived")
	 ;; (mutex-lock! bup-mutex)
	 (run-n-wait bup-exe params: bup-index-params print-cmd: print-prefix)
	 (debug:print-info 0 *default-log-port* "Archiving data with bup")
	 (run-n-wait bup-exe params: bup-save-params print-cmd: print-prefix)






















	 ;; (mutex-unlock! bup-mutex)
	 (for-each
	  (lambda (test-dat)
	    (let ((test-id           (db:test-get-id        test-dat))
		  (run-id            (db:test-get-run_id    test-dat)))
	      (rmt:test-set-archive-block-id run-id test-id archive-id)
	      (if (member archive-command '("save-remove"))


		  (runs:remove-test-directory test-dat 'archive-remove))))
	  (hash-table-ref test-groups disk-group))))
     (hash-table-keys disk-groups))
    #t))


















































































































(define (archive:bup-restore archive-command run-id run-name tests rp-mutex bup-mutex)  ;; move the getting of archive space down into the below block so that a single run can 
  ;; allocate as needed should a disk fill up
  ;;
  (let* ((bup-exe      (or (configf:lookup *configdat* "archive" "bup") "bup"))
	 (linktree     (common:get-linktree))) ;; (configf:lookup *configdat* "setup" "linktree")))

	      (toplevel/children (and (db:test-get-is-toplevel test-dat)
				      (> (rmt:test-toplevel-num-items run-id test-name) 0)))
	      (test-partial-path (conc target "/" run-name "/" (db:test-make-full-name test-name item-path)))
	      ;; note the trailing slash to get the dir inspite of it being a link
	      (test-path         (conc linktree "/" test-partial-path))
	      ;; if the old path was not deleted then prev-test-physical-path will end up pointing to a real directory
	      (mutex-lock! rp-mutex)
	      (prev-test-physical-path (if (file-exists? test-path)
					   ;; (read-symbolic-link test-path #t)
					   (common:real-path test-path)
					   #f))
	      (mutex-unlock! rp-mutex)
	      (new-test-physical-path  (conc best-disk "/" test-partial-path))
	      (archive-block-id        (db:test-get-archived test-dat))

	      (archive-block-info      (rmt:test-get-archive-block-info archive-block-id))
	      (archive-path            (if (vector? archive-block-info)
					   (vector-ref archive-block-info 2) ;; look in db.scm for test-get-archive-block-info for the vector record info
					   #f)) ;; no archive found?

	      (archive-internal-path   (conc (common:get-testsuite-name) "-" run-id "/latest/" test-partial-path)))
	 





	 ;; some sanity checks, move an existing path out of the way - iif it is not a toplevel with children
	 ;;
	 (if (and (not toplevel/children)  ;; special handling needed for toplevel with children
		  prev-test-physical-path
		  (file-exists? prev-test-physical-path)) ;; what to do? abort or clean up or link it in?
	     (let* ((base (pathname-directory prev-test-physical-path))
		    (dirn (pathname-file      prev-test-physical-path))
		    (newn (conc base "/." dirn)))
	       (debug:print-error 0 *default-log-port* "the old directory " prev-test-physical-path ", still exists! Moving it to " newn)
	       (rename-file prev-test-physical-path newn)))

	 (if (and archive-path ;; no point in proceeding if there is no actual archive
		  (not toplevel/children))
	     (begin
	       ;; CREATE WORK AREA
	       ;; test-src-path == #f     ==> don't copy in data from tests directory
	       ;; itemdat       == string ==> use directly
	       (create-work-area run-id run-name keyvals test-id #f best-disk test-name item-path) ;; #!key (remtries 2))

	       ;; 1. Get the block id from the test info
	       ;; 2. Get the block data given the block id
	       ;; 3. Construct the paths etc. for the following command:
	       ;; 
	       ;; bup -d /tmp/matt/adisk1/2015_q1/fullrun_e1a40/ restore -C /tmp/seeme fullrun-30/latest/ubuntu/nfs/none/w02.1.20.54_b/

	       ;; DO BUP RESTORE
	       (let* ((new-test-dat        (rmt:get-test-info-by-id run-id test-id))
		      (new-test-path       (if (vector? new-test-dat )
					       (db:test-get-rundir new-test-dat)
					       (begin
						 (debug:print-error 0 *default-log-port* "unable to get data for run-id=" run-id ", test-id=" test-id)
						 (exit 1))))
		      ;; new-test-path won't work - must use best-disk instead? Nope, new-test-path but tack on /..
		      (bup-restore-params  (list "-d" archive-path "restore" "-C" (conc new-test-path "/..") archive-internal-path)))
		 (debug:print-info 0 *default-log-port* "Restoring archived data to " new-test-physical-path " from archive in " archive-path " ... " archive-internal-path)

		 ;; (mutex-lock! bup-mutex)
		 (run-n-wait bup-exe params: bup-restore-params print-cmd: #f)
		 ;; (mutex-unlock! bup-mutex)
		 (mt:test-set-state-status-by-id run-id test-id "COMPLETED" #f #f)))
	     (debug:print-error 0 *default-log-port* "No archive path in the record for run-id=" run-id " test-id=" test-id))))
     (filter vector? tests))))
	 

RUN=default.scm

all : batchsim
	./batchsim $(RUN)

batchsim : batchsim.scm
	csc batchsim.scm

(use ezxdisp srfi-18)

(define *ezx* (ezx-init 650 650 "Batch simulator"))
(require-library ezxgui)
(define *green*  (make-ezx-color 0 1 0)) 
(define *black*  (make-ezx-color 0 0 0))
(define *grey*   (make-ezx-color 0.1 0.1 0.1))
(define *blue*   (make-ezx-color 0 0 1)) 
(define *cyan*   (make-ezx-color 0 1 1))
(define *green*  (make-ezx-color 0 1 0))
(define *purple* (make-ezx-color 1 0 1))
(define *red*    (make-ezx-color 1 0 0))
(define *white*  (make-ezx-color 1 1 1))
(define *yellow* (make-ezx-color 1 1 0))

(define *user-colors-palette*
  (list 
   *green*
   *blue*
   *cyan*
   *purple*
   *red*
   *yellow*
   *black*))

(define *dark-green* (get-color "dark-green"))
(define *brown*      (get-color "brown"))

(ezx-select-layer *ezx* 1)
(ezx-wipe-layer *ezx* 1)

;; (ezx-str-2d *ezx* 30 30 "Hello" *white*)
;; (ezx-fillrect-2d *ezx* 100 100 120 120 *brown*)
(ezx-redraw *ezx*)

(define *last-draw* (current-milliseconds))
(define *draw-delta* 40) ;; milliseconds between drawing

(define (wait-for-next-draw-time)
  (let* ((cm    (current-milliseconds))
	 (delta (- *draw-delta* (- cm *last-draw*))))
    (if (> delta 0)
	(thread-sleep! (/ delta 1000)))
    (set! *last-draw* (current-milliseconds))))

(include "events.scm")

;; System spec (to be moved into loaded file)
;;
;;                           x  y  w gap  x-min x-max
(define *cpu-grid* (vector  500 50 15  2  500   600))
(define (make-cpu:grid)(make-vector 6))
(define *queues* (make-hash-table)) ;; name -> (list (list user duration num-cpus num-gigs) ... )
(define *cpus* (make-hash-table)) ;; cpu-name => (vector user job-len num-cpu mem x-loc y-loc)
(define *obj-locations* (make-hash-table)) ;; name -> (x y layer)
(define *queue-spec*
  (vector
   80  ;; start-x
   300 ;; start-y
   300 ;; delta-y how far to next queue
   15  ;; height
   400 ;; length
   ))
(define *use-log* #f)
(define *job-log-scale* 10)

;;======================================================================
;; CPU
;;======================================================================

(define-record cpu name num-cores mem job x y)

;;======================================================================
;; CPU Pool
;;======================================================================

(define-record pool name x y w h gap boxw cpus delta nrows ncols cpunum)

(define (new-pool name x y nrows ncols gap boxw)
  (let* ((delta (+ gap boxw))
	 ;; (nrows (quotient h (+ gap delta)))
	 ;; (ncols (quotient w (+ gap delta)))
	 (w     (+ gap (* nrows delta)))
	 (h     (+ gap (* ncols delta)))
	 (cpus  (make-vector (* nrows ncols) #f))
	 (npool (make-pool name x y w h gap boxw cpus delta nrows ncols 0)))
    npool))

(define (pool:add-cpu pool name num-cores mem)
  (let* ((cpu (make-cpu name num-cores mem #f #f #f)))
    (vector-set! (pool-cpus pool)(pool-cpunum pool) cpu)
    (pool-cpunum-set! pool (+ 1 (pool-cpunum pool)))
    cpu))

(define (pool:draw ezx pool)
  (let ((nrows (pool-nrows pool))
	(ncols (pool-ncols pool))
	(x     (pool-x     pool))
	(y     (pool-y     pool))
	(w     (pool-w     pool))
	(h     (pool-h     pool))
	(gap   (pool-gap   pool))
	(boxw  (pool-boxw  pool))
	(delta (pool-delta pool))
	(cpus  (pool-cpus  pool)))
    (ezx-select-layer ezx 1)
    ;(ezx-wipe-layer   ezx 1)
    ;; draw time at upper right
    (ezx-str-2d ezx x y (pool-name pool) *black*)
    (ezx-rect-2d ezx x y (+ x w)(+ y h) *black* 1)
    (let loop ((row    0)
	       (col    0)
	       (cpunum 0))
      (let* ((cpu  (vector-ref cpus cpunum))
	     (xval (+ x gap (* row delta)))
	     (yval (+ y gap (* col delta))))
	(if cpu
	    (begin
	      (cpu-x-set! cpu xval)
	      (cpu-y-set! cpu yval))
	    (vector-set! cpus cpunum (make-cpu (conc cpunum) 1 1 #f xval yval)))
	;; (print "box at " xval ", " yval)
	(ezx-rect-2d ezx xval yval (+ xval boxw) (+ yval boxw) *grey* 1)
	(if (< col (- ncols 1))
	    (loop row (+ col 1)(+ cpunum 1))
	    (if (< row (- nrows 1))
		(loop (+ row 1) 0 (+ cpunum 1))))))
    (ezx-redraw ezx)))
	       

;;======================================================================
;; Users
;;======================================================================

(define *user-colors* (make-hash-table))

(define (get-user-color user)
  (let ((color (hash-table-ref/default *user-colors* user #f)))
    (if color
	color
	(let* ((color-num (+ (length (hash-table-keys *user-colors*)) 1))
	       (color     (list-ref *user-colors-palette* color-num)))
	  (hash-table-set! *user-colors* user color)
	  color))))

;;======================================================================
;; Job Queues
;;======================================================================

;; jobs

(define (make-queue:job)(make-vector 4))
(define-inline (queue:job-get-user       vec)    (vector-ref  vec 0))
(define-inline (queue:job-get-duration   vec)    (vector-ref  vec 1))
(define-inline (queue:job-get-num-cpu    vec)    (vector-ref  vec 2))
(define-inline (queue:job-get-num-gigs   vec)    (vector-ref  vec 3))
(define-inline (queue:job-set-user!      vec val)(vector-set! vec 0 val))
(define-inline (queue:job-set-duration!  vec val)(vector-set! vec 1 val))
(define-inline (queue:job-set-num-cpu!   vec val)(vector-set! vec 2 val))
(define-inline (queue:job-set-num-gigs!  vec val)(vector-set! vec 3 val))

;; add a job to the queue
;;
(define (add-job queue-name user duration num-cpu num-gigs)
  (let* ((queue-dat (hash-table-ref/default *queues* queue-name '()))
	 (new-queue (append 
		     queue-dat
		     (list (vector user duration num-cpu num-gigs)))))
  (hash-table-set! *queues* queue-name new-queue)
  (draw-queue-jobs queue-name)))

;; peek for jobs to do in queue
;;
(define (peek-job queue-name)
  (let ((queue (hash-table-ref/default *queues* queue-name '())))
    (if (null? queue)
	#f
	(car queue))))

;; take job from queue
;;
(define (take-job queue-name)
  (let ((queue (hash-table-ref/default *queues* queue-name '())))
    (if (null? queue)
	#f
	(begin
	  (hash-table-set! *queues* queue-name (cdr queue))
	  (draw-queue-jobs queue-name)
	  (car queue)))))

;;======================================================================
;; CPUs
;;======================================================================

(define (make-cpu:dat)(make-vector 6 #f))
(define-inline (cpu:dat-get-user      vec)    (vector-ref  vec 0))
(define-inline (cpu:dat-get-job-len   vec)    (vector-ref  vec 1))
(define-inline (cpu:dat-get-num-cpu   vec)    (vector-ref  vec 2))
(define-inline (cpu:dat-get-mem       vec)    (vector-ref  vec 3))
(define-inline (cpu:dat-get-x         vec)    (vector-ref  vec 4))
(define-inline (cpu:dat-get-y         vec)    (vector-ref  vec 5))
(define-inline (cpu:dat-set-user!     vec val)(vector-set! vec 0 val))
(define-inline (cpu:dat-set-job-len!  vec val)(vector-set! vec 1 val))
(define-inline (cpu:dat-set-num-cpu!  vec val)(vector-set! vec 2 val))
(define-inline (cpu:dat-set-mem!      vec val)(vector-set! vec 3 val))
(define-inline (cpu:dat-set-x!        vec val)(vector-set! vec 4 val))
(define-inline (cpu:dat-set-y!        vec val)(vector-set! vec 5 val))

(define-inline (cpu:grid-get-x        vec)    (vector-ref  vec 0))
(define-inline (cpu:grid-get-y        vec)    (vector-ref  vec 1))
(define-inline (cpu:grid-get-w        vec)    (vector-ref  vec 2))
(define-inline (cpu:grid-get-gap      vec)    (vector-ref  vec 3))
(define-inline (cpu:grid-get-x-min    vec)    (vector-ref  vec 4))
(define-inline (cpu:grid-get-x-max    vec)    (vector-ref  vec 5))
(define-inline (cpu:grid-set-x!       vec val)(vector-set! vec 0 val))
(define-inline (cpu:grid-set-y!       vec val)(vector-set! vec 1 val))
(define-inline (cpu:grid-set-w!       vec val)(vector-set! vec 2 val))
(define-inline (cpu:grid-set-gap!     vec val)(vector-set! vec 3 val))
(define-inline (cpu:grid-set-x-min!   vec val)(vector-set! vec 4 val))
(define-inline (cpu:grid-set-x-max!   vec val)(vector-set! vec 5 val))

(define (add-cpu name num-cores mem)
  (let ((x     (cpu:grid-get-x     *cpu-grid*))
	(y     (cpu:grid-get-y     *cpu-grid*))
	(delta (+ (cpu:grid-get-w  *cpu-grid*)(cpu:grid-get-gap *cpu-grid*)))
	(x-max (cpu:grid-get-x-max *cpu-grid*)))
    (hash-table-set! *cpus* name (vector #f #f num-cores mem x y))
    (if (> x x-max)
	(begin
	  (cpu:grid-set-x! *cpu-grid* (cpu:grid-get-x-min *cpu-grid*))
	  (cpu:grid-set-y! *cpu-grid* (+ y delta)))
	(cpu:grid-set-x! *cpu-grid* (+ x delta)))))

;; draw grey box for each cpu on layer 2
;; jobs are drawn on layer 1
;;
(define (draw-cpus) ;; call once after init'ing all cpus
  (ezx-select-layer *ezx* 1)
  (ezx-wipe-layer   *ezx* 1)
  ;; draw time at upper right
  (ezx-str-2d *ezx* 20 20 (seconds->h:m:s *now*) *black*)
  (for-each
   (lambda (cpu)
     (let ((x (cpu:dat-get-x cpu))
	   (y (cpu:dat-get-y cpu))
	   (w (cpu:grid-get-w *cpu-grid*)))
       (ezx-rect-2d *ezx* x y (+ x w) (+ y w) *grey* 1)))
   (hash-table-values *cpus*))
  (ezx-redraw *ezx*))

(define (draw-jobs)
  ;; (draw-cpus)
  (ezx-select-layer *ezx* 2)
  (ezx-wipe-layer   *ezx* 2)
  (for-each
   (lambda (cpu)
     (let* ((x (cpu:dat-get-x cpu))
	    (y (cpu:dat-get-y cpu))
	    (w (cpu:grid-get-w *cpu-grid*))
	    (u (cpu:dat-get-user cpu)))
       (if u ;; job running if not #f
	   (let ((color (get-user-color u)))
	     (ezx-fillrect-2d *ezx* (+ x 2)(+ 2 y)(+ x 9) (+ y 9) color)))))
   (hash-table-values *cpus*))
  (ezx-redraw *ezx*))

(define (end-job cpu-name user)
  (let ((cpu (hash-table-ref/default *cpus* cpu-name #f)))
    (if cpu
	(let ((curr-user (cpu:dat-get-user cpu))) ;; if it is a user name then job is not done - error
	  (if (or (not curr-user)
		  (not (equal? curr-user user)))
	      (print "ERROR: cpu " cpu-name " not running job for " user "!")
	      (begin
		(cpu:dat-set-user!    cpu #f)
		(cpu:dat-set-job-len! cpu #f)
		(draw-jobs)))) ;; hash-table-set! *cpus* cpu-name (make-cpu:dat))))
	(print "ERROR: no cpu " cpu-name " found. Ensure it is registered before addressing it."))))

(define (run-job cpu-name job)
  (let* ((user    (queue:job-get-user     job))
	 (job-len (queue:job-get-duration job))
	 (cpu     (hash-table-ref/default *cpus* cpu-name #f)))
    (if cpu
	(let ((curr-user (cpu:dat-get-user cpu))) ;; if it is a user name then job is not done - error
	  (if curr-user
	      (begin
		(print "ERROR: cpu already busy! Adding more jobs not supported yet. " cpu-name)
		#f)
	      (begin
		(cpu:dat-set-user!    cpu user)
		(cpu:dat-set-job-len! cpu job-len)
		(draw-jobs)
		(hash-table-set! *cpus* cpu-name cpu)
		(event (+ *now* job-len) (lambda ()(end-job cpu-name user)))
		#t)))
	#f)))
    
(define (get-cpu)
  (let ((all-cpus (hash-table-keys *cpus*)))
    (if (null? all-cpus) 
	#f
	(let loop ((hed (car all-cpus))
		   (tal (cdr all-cpus)))
	  (if (cpu:dat-get-user (hash-table-ref/default *cpus* hed '(#f #f))) ;; if user is #f then cpu is available
	      (if (null? tal)
		  #f
		  (loop (car tal)(cdr tal)))
	      hed)))))
  
;;======================================================================
;; Animation
;;======================================================================

;; make-vector-record  queue spec x y delta-y height length
(define (make-queue:spec)(make-vector 5))
(define-inline (queue:spec-get-x         vec)    (vector-ref  vec 0))
(define-inline (queue:spec-get-y         vec)    (vector-ref  vec 1))
(define-inline (queue:spec-get-delta-y   vec)    (vector-ref  vec 2))
(define-inline (queue:spec-get-height    vec)    (vector-ref  vec 3))
(define-inline (queue:spec-get-length    vec)    (vector-ref  vec 4))
(define-inline (queue:spec-set-x!        vec val)(vector-set! vec 0 val))
(define-inline (queue:spec-set-y!        vec val)(vector-set! vec 1 val))
(define-inline (queue:spec-set-delta-y!  vec val)(vector-set! vec 2 val))
(define-inline (queue:spec-set-height!   vec val)(vector-set! vec 3 val))
(define-inline (queue:spec-set-length!   vec val)(vector-set! vec 4 val))

;; queues are drawn on layer 3 but boxes (jobs) are drawn on the numbered layer
;;
(define (draw-queues)
  (let* ((text-offset 3)
	 (queue-names (sort (hash-table-keys *queues*) string>=?))
	 (start-x (vector-ref *queue-spec* 0))
	 (text-x  (+ start-x text-offset))
	 (delta-y (vector-ref *queue-spec* 1))
	 (delta-x (vector-ref *queue-spec* 2))
	 (height  (vector-ref *queue-spec* 3))
	 (length  (vector-ref *queue-spec* 4))
	 (end-x   (+ start-x length)))
    (ezx-select-layer *ezx* 3)
    (ezx-wipe-layer   *ezx* 3)
    (let loop ((y       (vector-ref *queue-spec* 1))
	       (qname   (car queue-names))
	       (tail    (cdr queue-names))
	       (layer   4))
      (print "Drawing queue at x=" start-x ", y=" y)
      (ezx-fillrect-2d  *ezx* start-x y end-x (+ y height) *brown*)
      (ezx-str-2d       *ezx* text-x (- (+ y height) text-offset) qname *white*)
      (hash-table-set! *obj-locations* qname (list start-x y layer))
      (if (not (null? tail))
	  (loop (+ y height delta-y)
		(car tail)
		(cdr tail)
		(+  layer 1))))
    (ezx-redraw *ezx*)))

;; compress queue data to (vector user count) list
;;
(define (draw-queue-compress-queue-data queue-dat)
  (let loop ((hed  (car queue-dat))
	     (tal  (cdr queue-dat))
	     (curr #f) ;; (vector name count)
	     (res  '()))
    (let ((user (queue:job-get-user hed)))
      (cond
       ((not curr) ;; first time through only?
	(if (null? tal)
	    (append res (list (vector user 1)))
	    (loop (car tal)(cdr tal)(vector user 1) res)))
       ((equal? (vector-ref curr 0) user) 
	(vector-set! curr 1 (+ (vector-ref curr 1) 1))
	(if (null? tal)
	    (append res (list curr))
	    (loop (car tal)(cdr tal) curr res)))
       (else ;; names are different, add curr to queue and create new curr
	(let ((newcurr (vector user 1)))
	  (if (null? tal)
	      (append res (list newcurr))
	      (loop (car tal)(cdr tal) newcurr (append res (list curr))))))))))

;; draw jobs for a given queue
;;
(define (draw-queue-jobs queue-name)
  (let* ((queue-dat (hash-table-ref/default *queues*        queue-name #f))  ;; list of jobs in the queue
	 (obj-spec  (hash-table-ref/default *obj-locations* queue-name #f)))  ;; x, y etc. of the drawn queue
    (if obj-spec
	(let ((origin-x  (list-ref obj-spec 0))
	      (origin-y  (list-ref obj-spec 1))
	      (bar-width 10)
	      (queue-len (queue:spec-get-length *queue-spec*))
	      (layer     (list-ref obj-spec 2)))
	  (ezx-select-layer *ezx* layer)
	  (ezx-wipe-layer   *ezx* layer)
	  (if (not (null? queue-dat))
	      (let ((res (draw-queue-compress-queue-data queue-dat)))
		(if (not (null? res))
		    (let loop ((hed (car res))
			       (tal (cdr res))
			       (x2   (+ origin-x queue-len)))
		      (let* ((user (vector-ref hed 0))
			     (h    (let ((numjobs (vector-ref hed 1)))
				     (if *use-log*
					 (inexact->exact (round (log (+ 1 (* *job-log-scale* numjobs)))))
					 numjobs)))
			     (x1   (- x2  bar-width))
			     (y2   (- origin-y h)))
			;; (print "x1 " x1 ", origin-y " origin-y ", x2 " x2 ", y2 " y2)
			(ezx-fillrect-2d *ezx* x1 y2 x2 origin-y (get-user-color user))
			(if (not (null? tal))
			    (loop (car tal)(cdr tal) x1)))))
		(ezx-redraw *ezx*)))))))
	  
(let* ((args  (argv))
       (fname (if (> (length args) 1)
		  (cadr args)
 		  "default.scm")))
  (load (if (file-exists? fname) fname "default.scm")))

;; run sim for four hours
;;
(define *end-time* (* 60 50))

;; create the cpus
;;
(let loop ((count 200))
  (add-cpu (conc "cpu_" count) 1 1)
  (if (>= count 0)(loop (- count 1))))

(draw-cpus)

(define *pool1* (new-pool "generic" 100 100 100 100 2 10))
(let loop ((count 10))
  (pool:add-cpu *pool1* (conc count) 1 1)
  (if (> count 0)
      (loop (- count 1))))

(pool:draw *ezx* *pool1*)

;; init the queues
;;
(hash-table-set! *queues* "normal" '())
(hash-table-set! *queues* "quick"  '())
(draw-queues)

;; user k adds 200 jobs at time zero
;;
(event *start-time*
       (lambda ()
	 (let loop ((count 300)) ;; add 500 jobs
	   (add-job "normal" "k" 600 1 1)
	   (if (>= count 0)(loop (- count 1))))))

;; one minute in user m runs ten jobs
;;
(event (+ 600 *start-time*)
       (lambda ()
	 (let loop ((count 300)) ;; add 100 jobs
	   (add-job "normal" "m" 600 1 1)
	   (if (> count 0)(loop (- count 1))))))

;; every minute user j runs ten jobs
;;
(define *user-j-jobs* 300)
(event (+ 600 *start-time*)
       (lambda ()
	 (let f ()
	   (schedule 60)
	   (if (> *user-j-jobs* 0)
	       (begin
		 (let loop ((count 5)) ;; add 100 jobs
		   (add-job "quick" "j" 600 1 1)
		   (if (> count 0)(loop (- count 1))))
		 (set! *user-j-jobs* (- *user-j-jobs* 5))))
	   (if (and (not *done*)
		    (> *user-j-jobs* 0))
	       (f))))) ;; Megatest user running 200 jobs

;; every minute user j runs ten jobs
;;
(define *user-j-jobs* 300)
(event (+ 630 *start-time*)
       (lambda ()
	 (let f ()
	   (schedule 60)
	   (if (> *user-j-jobs* 0)
	       (begin
		 (let loop ((count 5)) ;; add 100 jobs
		   (add-job "quick" "n" 600 1 1)
		   (if (> count 0)(loop (- count 1))))
		 (set! *user-j-jobs* (- *user-j-jobs* 5))))
	   (if (and (not *done*)
		    (> *user-j-jobs* 0))
	       (f))))) ;; Megatest user running 200 jobs

;; ;;
;; (event *start-time*
;;        (lambda ()
;; 	 (let f ((count 200))
;; 	   (schedule 10)
;; 	   (add-job "normal" "t" 60 1 1)
;; 	   (if (and (not *done*)
;; 		    (>= count 0))
;; 	       (f (- count 1))))))

;; every 3 seconds check for available machines and launch a job
;;
(event *start-time*
       (lambda ()
	 (let f ()
	   (schedule 3)
	   (let ((queue-names (random-sort (hash-table-keys *queues*))))
	     (let loop ((cpu   (get-cpu))
			(count (+ (length queue-names) 4))
			(qname (car queue-names))
			(remq  (cdr queue-names)))
	       (if (and cpu
			(> count 0))
		   (begin
		     (if (peek-job qname) ;; any jobs to do in normal queue
			 (let ((job (take-job qname)))
			   (run-job cpu job)))
		     (loop (get-cpu)
			   (- count 1)
			   (if (null? remq)
			       (car queue-names)
			       (car remq))
			   (if (null? remq)
			       (cdr queue-names)
			       (cdr remq)))))))
	   (if (not *done*)(f)))))

;; screen updates
;;
(event *start-time* (lambda ()
		      (let f ()
			(schedule 60) ;; update the screen every 60 seconds of sim time
			(draw-cpus) ;; (print "Now: " *now* " queue: " (hash-table->alist *queues*))
			(wait-for-next-draw-time)
			(if (not *done*) (f)))))


;; end the simulation
;;
(event *end-time*
       (lambda () 
	 (set! *event-list* '())
	 (set! *done* #t)))

(start)
;; (exit 0)

;;======================================================================
;; Event Processing and Simulator
;;======================================================================

;; The global event list
(define *event-list* '())
(define *start-time* 0)
(define *end-time*   (* 60 60 4)) ;; four hours
(define *now*        *start-time*)
(define *done*       #f)

(define (random-sort l)
  (sort l
        (lambda (x y)
          (equal? 0 (random 2))))) 
				    
;; Each item in the event list is a list of a scheduled time and the thunk
;; (time thunk). Sort the list so that the next event is the earliest.
;;
(define event-sort
  (lambda (@a @b)
    (< (car @a)(car @b))))

(define event
  (lambda ($time $thunk)  ;; add a sort based on scheduled time here -- improve later
                          ;; to use an insert algorythm.
    (set! *event-list* (sort (cons (list $time $thunk) *event-list*) event-sort))))

(define start
  (lambda ()
    (let ((next (car *event-list*)))
      (set! *event-list* (cdr *event-list*))
      (set! *now* (car next))      
      (if (not *done*) ;; note that the second item in the list is the thunk
	  ((car (cdr next)))))))

(define pause
  (lambda ()
    (call/cc 
     (lambda (k)
       (event (lambda () (k #f)))
       (start)))))

(define schedule
  (lambda ($time)
    (call/cc 
     (lambda (k)
       (event (+ *now* $time) (lambda () (k #f)))
       (start)))))

;; (event (lambda () (let f () (pause) (display "h") (f))))

(define years->seconds
  (lambda ($yrs)
    (* $yrs 365 24 3600)))

(define weeks->seconds
  (lambda ($wks)
    (* $wks 7 24 3600)))

(define days->seconds
  (lambda ($days)
    (* $days 24 3600)))

(define months->seconds
  (lambda ($months)
    (* $months (/ 365 12) 24 3600)))

(define seconds->date
  (lambda ($seconds)
    (posix-strftime "%D" (posix-localtime (inexact->exact $seconds)))))

(define (seconds->h:m:s seconds)
  (let* ((hours   (quotient seconds 3600))
	 (rem1    (- seconds (* hours 3600)))
	 (minutes (quotient rem1 60))
	 (rem-sec (- rem1 (* minutes 60))))
    (conc hours "h " minutes "m " rem-sec "s")))

;; run sim for four hours
;;
(define *end-time* (* 60 50))

;; create the cpus
;;
(let loop ((count 200))
  (add-cpu (conc "cpu_" count) 1 1)
  (if (>= count 0)(loop (- count 1))))

;; (draw-cpus)

(define *pool1* (new-pool "generic" 20 20 12 80 2 4))
(let loop ((count 10))
  (pool:add-cpu *pool1* (conc count) 1 1)
  (if (> count 0)
      (loop (- count 1))))

(pool:draw *ezx* *pool1*)

;; ;; init the queues
;; ;;
;; (hash-table-set! *queues* "normal" '())
;; (hash-table-set! *queues* "quick"  '())
;; (draw-queues)
;; 
;; ;; user k adds 200 jobs at time zero
;; ;;
;; (event *start-time*
;;        (lambda ()
;; 	 (let loop ((count 300)) ;; add 500 jobs
;; 	   (add-job "normal" "k" 600 1 1)
;; 	   (if (>= count 0)(loop (- count 1))))))
;; 
;; ;; one minute in user m runs ten jobs
;; ;;
;; (event (+ 600 *start-time*)
;;        (lambda ()
;; 	 (let loop ((count 300)) ;; add 100 jobs
;; 	   (add-job "normal" "m" 600 1 1)
;; 	   (if (> count 0)(loop (- count 1))))))
;; 
;; ;; every minute user j runs ten jobs
;; ;;
;; (define *user-j-jobs* 300)
;; (event (+ 600 *start-time*)
;;        (lambda ()
;; 	 (let f ()
;; 	   (schedule 60)
;; 	   (if (> *user-j-jobs* 0)
;; 	       (begin
;; 		 (let loop ((count 5)) ;; add 100 jobs
;; 		   (add-job "quick" "j" 600 1 1)
;; 		   (if (> count 0)(loop (- count 1))))
;; 		 (set! *user-j-jobs* (- *user-j-jobs* 5))))
;; 	   (if (and (not *done*)
;; 		    (> *user-j-jobs* 0))
;; 	       (f))))) ;; Megatest user running 200 jobs
;; 
;; ;; every minute user j runs ten jobs
;; ;;
;; (define *user-j-jobs* 300)
;; (event (+ 630 *start-time*)
;;        (lambda ()
;; 	 (let f ()
;; 	   (schedule 60)
;; 	   (if (> *user-j-jobs* 0)
;; 	       (begin
;; 		 (let loop ((count 5)) ;; add 100 jobs
;; 		   (add-job "quick" "n" 600 1 1)
;; 		   (if (> count 0)(loop (- count 1))))
;; 		 (set! *user-j-jobs* (- *user-j-jobs* 5))))
;; 	   (if (and (not *done*)
;; 		    (> *user-j-jobs* 0))
;; 	       (f))))) ;; Megatest user running 200 jobs
;; 
;; ;; ;;
;; ;; (event *start-time*
;; ;;        (lambda ()
;; ;; 	 (let f ((count 200))
;; ;; 	   (schedule 10)
;; ;; 	   (add-job "normal" "t" 60 1 1)
;; ;; 	   (if (and (not *done*)
;; ;; 		    (>= count 0))
;; ;; 	       (f (- count 1))))))
;; 
;; ;; every 3 seconds check for available machines and launch a job
;; ;;
;; (event *start-time*
;;        (lambda ()
;; 	 (let f ()
;; 	   (schedule 3)
;; 	   (let ((queue-names (random-sort (hash-table-keys *queues*))))
;; 	     (let loop ((cpu   (get-cpu))
;; 			(count (+ (length queue-names) 4))
;; 			(qname (car queue-names))
;; 			(remq  (cdr queue-names)))
;; 	       (if (and cpu
;; 			(> count 0))
;; 		   (begin
;; 		     (if (peek-job qname) ;; any jobs to do in normal queue
;; 			 (let ((job (take-job qname)))
;; 			   (run-job cpu job)))
;; 		     (loop (get-cpu)
;; 			   (- count 1)
;; 			   (if (null? remq)
;; 			       (car queue-names)
;; 			       (car remq))
;; 			   (if (null? remq)
;; 			       (cdr queue-names)
;; 			       (cdr remq)))))))
;; 	   (if (not *done*)(f)))))
;; 
;; ;; screen updates
;; ;;
(event *start-time* (lambda ()
		      (let f ()
			(schedule 60) ;; update the screen every 60 seconds of sim time
			;; (draw-cpus) ;; (print "Now: " *now* " queue: " (hash-table->alist *queues*))
			(pool:draw *ezx* *pool1*)

			(wait-for-next-draw-time)
			(if (not *done*) (f)))))
;; 
;; 
;; ;; end the simulation
;; ;;
(event *end-time*
       (lambda () 
	 (set! *event-list* '())
	 (set! *done* #t)))
;; 
(start)
;; ;; (exit 0)
;; 

#!/bin/bash 

if [[ $SLEEPRUNNER == "" ]];then
SLEEPRUNNER=0
fi
  
echo "nbfake $@ &> /dev/null" | at now + $SLEEPRUNNER minutes &> /dev/null

1. copy megatest.config to cgi-bin/.megatest.config
2. edit cgi-bin/.megatest.config, change appropriate settings
   i. sroot   => points to your models and pages
  ii. logs, twikidir (legacy, will be removed in future) must be 
      writeable.
 iii. domain is used to construct the return URLs (to be fixed).
  iv. debug mode give a useful stack dump on hitting errors.
3. compile mtutil and copy the mtut binary (look in the bin dir)
   to cgi-bin/megatest
4. use mtutil to populate your database schema

../models

../pages

.modal {
    display: none; /* Hidden by default */
    position: fixed; /* Stay in place */
    z-index: 1; /* Sit on top */
    padding-top: 100px; /* Location of the box */
    left: 0;
    top: 0;
    width: 100%; /* Full width */
    height: 100%; /* Full height */
    overflow: auto; /* Enable scroll if needed */
    background-color: rgb(0,0,0); /* Fallback color */
    background-color: rgba(0,0,0,0.4); /* Black w/ opacity */
}

/* Modal Content */
.modal-content {
    background-color: #fefefe;
    margin: auto;
    padding: 20px;
    border: 1px solid #888;
    width: 80%;
    top: 50%
}

/* The Close Button */
.close {
    color: #aaaaaa;
    float: right;
    font-size: 28px;
    font-weight: bold;
}

.close:hover,
.close:focus {
    color: #000;
    text-decoration: none;
    cursor: pointer;
}

.vote {
    color: #faaaaa;
}

$(document).ready(function(){
    $(".viewmodal").click(function(){
        var modal =  document.getElementById("myModal" + this.id);
       // alert(this.id);
        modal.style.display = "block";
 
    });
    $(".close").click(function(){
        var modal =  document.getElementById("myModal" + this.id);
       // alert(this.id);
        modal.style.display = "none";
 
    });
});

'(sroot   "/path/to/models"
  logfile "/path/to/logs/megatest.log"     ;; this is now required!
  twikidir "/path/to/writable/work/area"
  dbtype  pg ;; 'sqlite3 ;; or 'pg
  dbinit   '((dbname   . "megatest_db")
            (user      . "username")
            (password  . "secretpassword")
            (host      . "localhost"))
  domain  "yourdomain.com"
  page-dir-style flat
  debugmode  #t)

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.




;; 

;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR




;;  PURPOSE.
;;======================================================================

(declare (unit pgdb))
(declare (uses configf))

;; I don't know how to mix compilation units and modules, so no module here.
;;

		exn
		(begin
		  (print-call-chain)
		  (debug:print 0 *default-log-port* "ERROR: cannot create ttype entry, " ((condition-property-accessor 'exn 'message) exn))
		  #f)
	      (dbi:exec dbh "INSERT INTO ttype (target_spec) VALUES (?);" target-spec))
	    (pgdb:get-ttype dbh target-spec)))))







































;;======================================================================
;;  R U N S
;;======================================================================

;; given a target spec id, target and run-name return the run-id
;; if no run found return #f
;;
(define (pgdb:get-run-id dbh spec-id target run-name)
  (dbi:get-one dbh "SELECT id FROM runs WHERE ttype_id=? AND target=? AND run_name=?;"
	       spec-id target run-name))








;; given a run-id return all the run info
;;
(define (pgdb:get-run-info dbh run-id) ;; to join ttype or not?
  (dbi:get-one-row
   dbh   ;; 0    1       2       3      4     5      6       7        8         9         10          11         12
   "SELECT id,target,ttype_id,run_name,state,status,owner,event_time,comment,fail_count,pass_count,last_update,area_id
       FROM runs WHERE id=?;" run-id))

;; refresh the data in a run record
;;
(define (pgdb:refresh-run-info dbh run-id state status owner event-time comment fail-count pass-count) ;; area-id)
  (dbi:exec
   dbh
   "UPDATE runs SET
      state=?,status=?,owner=?,event_time=?,comment=?,fail_count=?,pass_count=?
     WHERE id=?;"
   state status owner event-time comment fail-count pass-count run-id))

;; given all needed info create run record
;;
(define (pgdb:insert-run dbh ttype-id target run-name state status owner event-time comment fail-count pass-count)
  (dbi:exec
   dbh
   "INSERT INTO runs (ttype_id,target,run_name,state,status,owner,event_time,comment,fail_count,pass_count)
      VALUES (?,?,?,?,?,?,?,?,?,?);"
    ttype-id target run-name state status owner event-time comment fail-count pass-count))















































































;;======================================================================
;;  T E S T S
;;======================================================================

;; given run-id, test_name and item_path return test-id
;;
(define (pgdb:get-test-id dbh run-id test-name item-path)
  (dbi:get-one
   dbh
   "SELECT id FROM tests WHERE run_id=? AND test_name=? AND item_path=?;"
   run-id test-name item-path))








;; create new test record
;;
(define (pgdb:insert-test dbh run-id test-name item-path state status host cpuload diskfree uname run-dir log-file run-duration comment event-time archived)
  (dbi:exec
   dbh
   "INSERT INTO tests (run_id,test_name,item_path,state,status,host,cpuload,diskfree,uname,rundir,final_logf,run_duration,comment,event_time,archived)
       VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?);"

   run-id  test-name item-path    state   status     host  cpuload diskfree uname
   run-dir log-file  run-duration comment event-time archived))

;; update existing test record
;;
(define (pgdb:update-test dbh test-id run-id test-name item-path state status host cpuload diskfree uname run-dir log-file run-duration comment event-time archived)
  (dbi:exec
   dbh
   "UPDATE tests SET
      run_id=?,test_name=?,item_path=?,state=?,status=?,host=?,cpuload=?,diskfree=?,uname=?,rundir=?,final_logf=?,run_duration=?,comment=?,event_time=?,archived=?
    WHERE id=?;"

   run-id  test-name item-path    state   status     host  cpuload diskfree uname
   run-dir log-file  run-duration comment event-time archived test-id))

(define (pgdb:get-tests dbh target-patt)
  (dbi:get-rows
   dbh
   "SELECT t.id,t.run_id,t.test_name,t.item_path,t.state,t.status,t.host,t.cpuload,t.diskfree,t.uname,t.rundir,t.final_logf,t.run_duration,t.comment,t.event_time,t.archived,
           r.id,r.target,r.ttype_id,r.run_name,r.state,r.status,r.owner,r.event_time,r.comment
     FROM tests AS t INNER JOIN runs AS r ON t.run_id=r.id

(define *p* '("a" "b" "c"))
(define *k* '("all" "a"))
(define *d* '("all" 1 2 3 6 5 8 11 12))

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

(use regex)
(load "models/pgdb.scm")
(include "pages/filter-defs.scm")
(include "pages/home_ctrl.scm")
(include "pages/home_view.scm")

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

;; a function <pagename>-action is called on POST

(define (home-action action)
  (case (string->symbol action)
    ((filter)
     (let ((dot   (s:get-input 'dot))
	   (type (s:get-input 'kit-type))
	   (rel        (s:get-input 'rel-num))
           (bp (s:get-input 'bp)))
       ;;
       ;; s:set! is a page local var. Better than s:session-var-set! but still not a good idea.
       ;;
       
       (s:set! "dot" dot)
       (s:set! "type"  type)
       (s:set! "bp"  bp)

       (s:set! "rel" rel)))))

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

(define (pages:home session db shared)
  
  (let* ((dbh         (s:db))
         (limit 50)
         (curr-page   (if (or (equal? (s:get-param "pg") "") (equal? (s:get-param "pg") #f))
                      1
                        (string->number (s:get-param "pg"))))
         
         (offset (- (* limit  curr-page) limit))     
         (dot    (if (s:get-param "dot")
                           (string->number (s:get-param "dot"))
                           (if (and  (s:get "dot") (not (equal? (s:get "dot") "all")))
                             (string->number (s:get "dot"))
                              "all")))
         (type    (if (s:get-param "type")
                           (s:get-param "type")
                       (if (and (s:get "type") (not (equal? (s:get "type") "all")))
                              (s:get "type")
                              "all")))
          (bp    (if (s:get-param "bp")
                           (s:get-param "bp")
                       (if (s:get "bp") 
                              (s:get "bp")
                              "p1273")))
           (rel    (if (s:get-param "rel")
                           (s:get-param "rel")
                       (if (and  (s:get "rel") (not (equal? (s:get "rel") "all")))
                              (s:get "rel")
                              ""))) 
          (pattern  (pgdb:mk-pattern dot type bp rel)) 	 
	; (targets     (pgdb:get-targets-of-type dbh selected tfilter))
	            
	 (all-data       (pgdb:get-latest-run-stats-given-pattern dbh pattern  limit offset))
                           ;'()  )
			 ; (pgdb:get-stats-given-type-target dbh selected tfilter)
			 ; (pgdb:get-stats-given-target dbh tfilter)
			  
         (cnt     (pgdb:get-latest-run-cnt-by-pattern dbh pattern))
         (total-pages (ceiling (/ cnt  limit))) 
         (page-lst (pgdb:get-pg-lst total-pages))
         (ordered-data (pgdb:coalesce-runs1 all-data))
         (rel-val (if (equal? rel "")
                       "%"
                        rel)))
   (s:div 'class "col_12" 
        (s:ul 'class "tabs left"
          
        (map (lambda (x)
            	(s:li (s:a 'href (conc "#" x) x)))
	  *process*))
       (map (lambda (x)
        
       (s:div 'id  x 'class "tab-content"
      (s:div 'class "col_11"
	   (s:fieldset    "Area type and target filter"
	    (s:form
	     'action (conc "home.filter#" x) 'method "post"
	     (s:div 'class "col_12"
                        (s:div 'class "col_3"
			   (s:label "Release Type") (s:select (map (lambda (x)
                                           (if (equal?  x type)  
                                            (list x x x #t)
                                            (list x x x #f)) )
					  *kit-types*)
				     'name "kit-type"))
                   (s:div 'class "col_3"
			   (s:label "Dot") (s:select (map (lambda (x)
                                            (if (equal?  x dot)  
                                            (list x x x #t)
                                            (list x x x #f)))
					  *dots*)
				     'name "dot"))

		   (s:div 'class "col_3"
                            (s:input 'type "hidden" 'value x 'name "bp")
			   (s:label "Release #") (s:input 'type "text" 'name "rel-num" 'value rel-val))
		    (s:div 'class "col_2"
			   (s:input 'type "submit" 'name "set-filter-vals" 'value "Submit")))))
           (s:br)
           ;(s:p (conc dot(string? dot) )) 
             (s:p (map
            (lambda (i) 
          (s:span (s:a 'href (s:link-to "home" 'pg i ) "PAGE " i  )" | "))  
          page-lst))
           (s:p "  Result Format:   total / pass / fail / other")
            (if (equal? x bp)
             (begin 
           (s:fieldset	    (conc "Runs data for " pattern)
	      (let* ((a-keys (pgdb:ordered-data->a-keys ordered-data))
		   (b-keys (pgdb:ordered-data->b-keys ordered-data a-keys)))
  		  (s:table  'class "striped"
		   (s:tr  (s:th  'class "heading" ) 
 			(map
                	(lambda (th-key) 
                         (s:th 'class "heading" th-key )) 
                    a-keys))
		   (map
		    (lambda (row-key)
		      (s:tr (s:td row-key)
			    (map
			     (lambda (col-key)
			       (let ((val (let* ((ht  (hash-table-ref/default ordered-data col-key #f)))
					    (if ht (hash-table-ref/default ht row-key #f)))))
				 (if val
				     (let* ((total (vector-ref val 2))
                                            (event-time (vector-ref val 1)) 
					    (pass  (vector-ref val 3))
					    (fail  (vector-ref val 4))
					    (other (vector-ref val 5))
                                            (id (vector-ref val 6)) 
					    (passper (round (* (/ pass total) 100)))
					    (failper (- 100 passper))
                                             (history (pgdb:get-run-stats-history-given-target dbh 1 (conc col-key "/" row-key)))  
         				     (history-hash (pgdb:get-history-hash history))
                                             (history-keys (sort (hash-table-keys history-hash) string>=?))
					    (run-key (string-substitute "[/]" "_x_" (conc col-key "/" row-key) 'all)))
				       (s:td   'style (conc "background: -webkit-linear-gradient(left, green " passper "%, red); background: -o-linear-gradient(right, green " passper "%, red); background: -moz-linear-gradient(right, green " passper "%, red); background: linear-gradient(to right, green " passper "%, red);")
      				      (s:a 'class "white"  'href (s:link-to "run" 'target run-key)
					  (conc "Latest:" total "/" pass "/" fail "/" other)) (s:span "  | ") (s:a 'id id 'class "viewmodal"  'title "Click to see description"  "History") (s:br)
                                   (s:div 'id (conc "myModal" id) 'class "modal"
                                        (s:div 'class "modal-content"
                                             (s:span 'id id 'class "close" "×") 
    						;(s:p (conc "Modal " id ".."))
                                                 (s:div                                                  
                                                          (s:table 
                                                             (s:tr
                                                               (s:th "Runame")
                                                               (s:th "Result")
                                                               )
                                                            (map
			    					(lambda (history-key)
                                                                 (let* ((history-row (hash-table-ref/default history-hash history-key #f))
                                                                         (htotal (vector-ref history-row 1))
                                                                         (hpass (vector-ref history-row 2))
                                                                         (hfail (vector-ref history-row 3))
                                                                         (hother (vector-ref history-row 4))
                                                                         (passper (round (* (/ hpass htotal) 100))))
                                                                (s:tr (s:td  history-key)
                                                                      (s:td 'style (conc "background: -webkit-linear-gradient(left, green " passper "%, red); background: -o-linear-gradient(right, green " passper "%, red); background: -moz-linear-gradient(right, green " passper "%, red); background: linear-gradient(to right, green " passper "%, red);")
(conc  htotal "/" hpass "/" hfail "/" hother )))))
                                                              history-keys)))))))
				     (s:td ""))))
			     a-keys)))
		    b-keys))))
)
(begin 
(s:p ""))))))
 *process*))))

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

(use regex)

;; (load "models/pgdb.scm")
(include  "pages/index_ctrl.scm")
(include  "pages/index_view.scm")

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

;; a function <pagename>-action is called on POST

(define (index-action action)
  (case (string->symbol action)
    (else #f)))

;;======================================================================
;; Below are the raw chunks of html, css and jquery stuff needed to make
;; html kickstart and other useful things work
;;======================================================================

(define index:kickstart-junk
#<<EOF
<meta charset="UTF-8">
<meta name="viewport" content="width=device-width, initial-scale=1.0"/>
<meta name="description" content="" />

<link rel="stylesheet" type="text/css" href="/css/kickstart.css" media="all" />                  <!-- KICKSTART -->
<link rel="stylesheet" type="text/css" href="/style.css" media="all" />                          <!-- CUSTOM STYLES -->
<link rel="stylesheet" type="text/css" href="/css/pjhatwal-modal.css" media="all" />             <!-- Modal -->

<link rel="icon" type="image/x-icon" href="/favicon.ico" />
<style type="text/css">
      .column {
        /* border:1px solid red; */
        padding:0px;
     }
     a.white{
        color:white;
    }
    th.heading{
       text-align:-webkit-center;
       background:rgba(0, 0, 0, 0.21);  
    }

</style>
EOF
)

(define index:jquery
  (if #t 

#<<EOF
<script type="text/javascript" src="https://code.jquery.com/jquery-1.11.3.js"></script>
<script src="http://code.jquery.com/jquery-migrate-1.2.1.js"></script>
EOF

#<<EOF
<script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.6.4/jquery.min.js"></script>
<!--[if lt IE 9]><script src="http://html5shiv.googlecode.com/svn/trunk/html5.js"></script><![endif]-->
EOF
))

(define index:javascript
#<<EOF
<!-- <script type="text/javascript" src="/js/prettify.js"></script>                                  PRETTIFY -->
<script type="text/javascript" src="/js/kickstart.js"></script>                                  <!-- KICKSTART -->
<script type="text/javascript" src="/js/pjhatwal-modal.js "></script>                          <!-- Modal -->
EOF
)

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

(define (pages:index session db shared)
  (let* ((dbh         (s:db))
	 (page-name   (sdat-get-page s:session)))
    (if (equal? page-name "api")
	(s:call page-name) ;; go straight to the api
	(list
	 "<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd\">"
	 (s:html
	  (s:title (conc "Megatest")) 
	  (s:head
	   index:kickstart-junk
	   ) 
	  (s:body
	   (s:div 'class "grid flex" 'id "top_of_page"
		  ;; add visible to columns to help visualize them e.g. "col_12 visible"
                  (s:ul 'class "menu"
(s:li (s:a 'href ""  (s:i 'class "fa fa-inbox") "QA Summary")
      (s:ul
	(s:li (s:a 'href "/cgi-bin/megatest.sh/home"  "Component Snapshot"))
        (s:li (s:a 'href "/cgi-bin/megatest.sh/kitprogress"  "Kit/Contour progress"))
 )))
;(s:li (s:a 'href (s:link-to "run" ) "Runs"))) 
		  (case (string->symbol page-name)
		    ((index)  (s:call "home"))
		    (else     (s:call page-name))))
	   index:jquery
	   index:javascript
	   ))))))

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

(load "models/pgdb.scm")
(include "pages/log_ctrl.scm")
(include "pages/log_view.scm")

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

;; a function <pagename>-action is called on POST

(define (log-action action)
  (case (string->symbol action)
    ((dosomething)
     (dosomething))))

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================
(define (readlines filename)
  (call-with-input-file filename
    (lambda (p)
      (let loop ((line (read-line p))
                 (result '()))
        (if (eof-object? line)
            (reverse result)
            (loop (read-line p) (cons line result)))))))

(define (pages:log session db shared)
  (let* ((dbh         (s:db))
	 (id      (s:get-param 'testid))
         (tests (pgdb:get-test-by-id dbh id)))
     
    (if (eq? (length tests) 1)
    (begin
    (s:div 'class "col_12"
	   (s:fieldset
	   (conc "Show a runs for Target: " )
             (let* ((test (car tests))
		   (html-path (conc (vector-ref test 2) "/" (vector-ref test 3)))
                    (html-data (readlines html-path)))
                  (s:p html-data)))))
      (begin 
         (s:div 'class "col_12"
    "Log not found")))
))
		      

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

(load "models/pgdb.scm")
(include "pages/run_ctrl.scm")
(include "pages/run_view.scm")

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

;; a function <pagename>-action is called on POST

(define (run-action action)
  (case (string->symbol action)
    ((filter)
     (let ((run-name-filter (s:get-input 'run-name-filter))
            (target (s:get-input 'target)))
     (s:set! "run-name-filter" run-name-filter)
     (s:set! "target" target)))))

;;======================================================================
;; Copyright 2017, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================
(define (pages:run session db shared)
  (let* ((dbh         (s:db))
	 (target-param       (s:get-param 'target))   
         (target1      (if  (s:get "target") 
                       (s:get "target")
                       (s:get-param 'target)))
         (target (if (equal? target1 #f)
                     "%"
                    (string-substitute  "_x_"  "/" target1 'all)     
                    ))
         
         (run-filter (or (or (s:get "run-name-filter") (s:get-param 'run)) "%"))  
         (runs (pgdb:get-runs-by-target dbh target run-filter))
         (ordered-runs (pgdb:runs-to-hash runs)))
   
    (s:div 'class "col_12"
            (s:fieldset
	    "Run filter"
	    (s:form
	     'action "run.filter" 'method "post"
	     (s:div 'class "col_12"
		     (s:div 'class "col_6"
                           ;(s:p (conc "param" (s:get-param 'target)) )
                           ; (s:p (conc "get" (s:get "target")) )
                           ;(s:p target1)
			   (s:input-preserve 'name "run-name-filter" 'placeholder "Filter by run names")
                           (s:input 'type "hidden" 'value target 'name "target" ))

		    (s:div 'class "col_6"
			   (s:input 'type "submit" 'name "set-filter-vals" 'value "Submit")))
	     	     ))

	   (s:fieldset
	   (conc "Show a runs for Target: " target)
             (let* ((a-keys (sort (hash-table-keys ordered-runs) string>=?))
		   (b-keys (delete-duplicates(sort (apply
				  append
				  (map (lambda (sub-key)
					 (let ((subdat (hash-table-ref ordered-runs sub-key)))
					   (hash-table-keys subdat)))
				       a-keys))
				 string>=?))))
              
              (s:table
		   (s:tr  (s:th "") (map s:th a-keys))
		   (map
		    (lambda (row-key)
		      (s:tr (s:td row-key)
			    (map
			     (lambda (col-key)
			       (let ((val (let* ((ht  (hash-table-ref/default ordered-runs col-key #f)))
					    (if ht (hash-table-ref/default ht row-key #f)))))
				 (if val
				     (let* ((result (vector-ref val 2))
                                             (test-id (vector-ref val 4))
                                            (bg (if (equal? result "PASS")
                                                      "green"
                                                      "red")))
				       (s:td 'style (conc "background: " bg )
					     (s:a 'class "white" 'href (s:link-to "log" 'testid test-id)
						  result)))
				     (s:td ""))))
			     a-keys)))
		    b-keys)))))))
		      

# HTML KickStart #
by Joshua Gatcke
http://www.99lime.com
Version: 0.94

## What is HTML KickStart? ##

HTML KickStart is an ultra–lean set of HTML5, CSS, and jQuery (javascript) files, layouts, and elements designed to give you a headstart and save you 10's of hours on your next web project. 

HTML KickStart includes everything you need to rapidly create website layouts – things like slideshows, menus, flexible grids, image placeholders, buttons, and more – saving you a ton of time so you can produce faster and make more money.

Bonus! All HTML KickStart Elements are fully Browser tested, they even gracefully degrade ;)

## Perfect for Wireframing in HTML ##

HTML KickStart has everything you need to rapidly create HTML Page Layouts, perfect for Wireframing in HTML. 
Layouts that used to take hours now take minutes.

## Getting Started ##

1. Download HTML KickStart
2. Open blank.html in your favorite text editor
3. Start adding KickStart Elements to blank.html: (http://www.99lime.com/elements/)
4. Save blank.html and open in your favorite Web Browser
5. Have fun!


## HTML KickStart is FREE and Open Source. ##
### Release Under the MIT Open Source License. ###

Copyright © 2011-2012 Joshua Gatcke http://www.99lime.com | HTML KickStart

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

<!DOCTYPE html>
<html>
<head>
	<!-- META -->
	<title>HTML KickStart Elements</title>
	<meta charset="UTF-8">
	<meta name="viewport" content="width=device-width, initial-scale=1.0"/>
	<meta name="description" content="" />
	
	<!-- CSS -->
	<link rel="stylesheet" type="text/css" href="css/kickstart.css" media="all" />
	<link rel="stylesheet" type="text/css" href="style.css" media="all" /> 
	
	<!-- Javascript -->
	<script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script>
	<script type="text/javascript" src="js/kickstart.js"></script>
</head>
<body>
<div class="grid">
	<div class="col_12" style="margin-top:100px;">
		<h1 class="center">
		<p><i class="fa fa-fire"></i></p>
		This example is blank</h1>
		<h4 style="color:#999;margin-bottom:40px;" class="center">Add some HTML KickStart Elements to see the magic happen</h4>
	</div>
</div> <!-- End Grid -->
</body>
</html>

{
    "name": "99lime/html-kickstart",
    "license": "MIT",
    "description": "Ultra–Lean HTML Building Blocks for Rapid Website Production",
    "minimum-stability": "dev",
    "authors": [
        {
            "name": "Joshua Gatcke",
            "email": "joshua@99lime.com"
        }
    ]
}

/*!
 *  Font Awesome 4.2.0 by @davegandy - http://fontawesome.io - @fontawesome
 *  License - http://fontawesome.io/license (Font: SIL OFL 1.1, CSS: MIT License)
 */
/* FONT PATH
 * -------------------------- */
@font-face {
  font-family: 'FontAwesome';
  src: url('../fonts/fontawesome-webfont.eot?v=4.2.0');
  src: url('../fonts/fontawesome-webfont.eot?#iefix&v=4.2.0') format('embedded-opentype'), url('../fonts/fontawesome-webfont.woff?v=4.2.0') format('woff'), url('../fonts/fontawesome-webfont.ttf?v=4.2.0') format('truetype'), url('../fonts/fontawesome-webfont.svg?v=4.2.0#fontawesomeregular') format('svg');
  font-weight: normal;
  font-style: normal;
}
.fa {
  display: inline-block;
  font: normal normal normal 14px/1 FontAwesome;
  font-size: inherit;
  text-rendering: auto;
  -webkit-font-smoothing: antialiased;
  -moz-osx-font-smoothing: grayscale;
}
/* makes the font 33% larger relative to the icon container */
.fa-lg {
  font-size: 1.33333333em;
  line-height: 0.75em;
  vertical-align: -15%;
}
.fa-2x {
  font-size: 2em;
}
.fa-3x {
  font-size: 3em;
}
.fa-4x {
  font-size: 4em;
}
.fa-5x {
  font-size: 5em;
}
.fa-fw {
  width: 1.28571429em;
  text-align: center;
}
.fa-ul {
  padding-left: 0;
  margin-left: 2.14285714em;
  list-style-type: none;
}
.fa-ul > li {
  position: relative;
}
.fa-li {
  position: absolute;
  left: -2.14285714em;
  width: 2.14285714em;
  top: 0.14285714em;
  text-align: center;
}
.fa-li.fa-lg {
  left: -1.85714286em;
}
.fa-border {
  padding: .2em .25em .15em;
  border: solid 0.08em #eeeeee;
  border-radius: .1em;
}
.pull-right {
  float: right;
}
.pull-left {
  float: left;
}
.fa.pull-left {
  margin-right: .3em;
}
.fa.pull-right {
  margin-left: .3em;
}
.fa-spin {
  -webkit-animation: fa-spin 2s infinite linear;
  animation: fa-spin 2s infinite linear;
}
@-webkit-keyframes fa-spin {
  0% {
    -webkit-transform: rotate(0deg);
    transform: rotate(0deg);
  }
  100% {
    -webkit-transform: rotate(359deg);
    transform: rotate(359deg);
  }
}
@keyframes fa-spin {
  0% {
    -webkit-transform: rotate(0deg);
    transform: rotate(0deg);
  }
  100% {
    -webkit-transform: rotate(359deg);
    transform: rotate(359deg);
  }
}
.fa-rotate-90 {
  filter: progid:DXImageTransform.Microsoft.BasicImage(rotation=1);
  -webkit-transform: rotate(90deg);
  -ms-transform: rotate(90deg);
  transform: rotate(90deg);
}
.fa-rotate-180 {
  filter: progid:DXImageTransform.Microsoft.BasicImage(rotation=2);
  -webkit-transform: rotate(180deg);
  -ms-transform: rotate(180deg);
  transform: rotate(180deg);
}
.fa-rotate-270 {
  filter: progid:DXImageTransform.Microsoft.BasicImage(rotation=3);
  -webkit-transform: rotate(270deg);
  -ms-transform: rotate(270deg);
  transform: rotate(270deg);
}
.fa-flip-horizontal {
  filter: progid:DXImageTransform.Microsoft.BasicImage(rotation=0, mirror=1);
  -webkit-transform: scale(-1, 1);
  -ms-transform: scale(-1, 1);
  transform: scale(-1, 1);
}
.fa-flip-vertical {
  filter: progid:DXImageTransform.Microsoft.BasicImage(rotation=2, mirror=1);
  -webkit-transform: scale(1, -1);
  -ms-transform: scale(1, -1);
  transform: scale(1, -1);
}
:root .fa-rotate-90,
:root .fa-rotate-180,
:root .fa-rotate-270,
:root .fa-flip-horizontal,
:root .fa-flip-vertical {
  filter: none;
}
.fa-stack {
  position: relative;
  display: inline-block;
  width: 2em;
  height: 2em;
  line-height: 2em;
  vertical-align: middle;
}
.fa-stack-1x,
.fa-stack-2x {
  position: absolute;
  left: 0;
  width: 100%;
  text-align: center;
}
.fa-stack-1x {
  line-height: inherit;
}
.fa-stack-2x {
  font-size: 2em;
}
.fa-inverse {
  color: #ffffff;
}
/* Font Awesome uses the Unicode Private Use Area (PUA) to ensure screen
   readers do not read off random characters that represent icons */
.fa-glass:before {
  content: "\f000";
}
.fa-music:before {
  content: "\f001";
}
.fa-search:before {
  content: "\f002";
}
.fa-envelope-o:before {
  content: "\f003";
}
.fa-heart:before {
  content: "\f004";
}
.fa-star:before {
  content: "\f005";
}
.fa-star-o:before {
  content: "\f006";
}
.fa-user:before {
  content: "\f007";
}
.fa-film:before {
  content: "\f008";
}
.fa-th-large:before {
  content: "\f009";
}
.fa-th:before {
  content: "\f00a";
}
.fa-th-list:before {
  content: "\f00b";
}
.fa-check:before {
  content: "\f00c";
}
.fa-remove:before,
.fa-close:before,
.fa-times:before {
  content: "\f00d";
}
.fa-search-plus:before {
  content: "\f00e";
}
.fa-search-minus:before {
  content: "\f010";
}
.fa-power-off:before {
  content: "\f011";
}
.fa-signal:before {
  content: "\f012";
}
.fa-gear:before,
.fa-cog:before {
  content: "\f013";
}
.fa-trash-o:before {
  content: "\f014";
}
.fa-home:before {
  content: "\f015";
}
.fa-file-o:before {
  content: "\f016";
}
.fa-clock-o:before {
  content: "\f017";
}
.fa-road:before {
  content: "\f018";
}
.fa-download:before {
  content: "\f019";
}
.fa-arrow-circle-o-down:before {
  content: "\f01a";
}
.fa-arrow-circle-o-up:before {
  content: "\f01b";
}
.fa-inbox:before {
  content: "\f01c";
}
.fa-play-circle-o:before {
  content: "\f01d";
}
.fa-rotate-right:before,
.fa-repeat:before {
  content: "\f01e";
}
.fa-refresh:before {
  content: "\f021";
}
.fa-list-alt:before {
  content: "\f022";
}
.fa-lock:before {
  content: "\f023";
}
.fa-flag:before {
  content: "\f024";
}
.fa-headphones:before {
  content: "\f025";
}
.fa-volume-off:before {
  content: "\f026";
}
.fa-volume-down:before {
  content: "\f027";
}
.fa-volume-up:before {
  content: "\f028";
}
.fa-qrcode:before {
  content: "\f029";
}
.fa-barcode:before {
  content: "\f02a";
}
.fa-tag:before {
  content: "\f02b";
}
.fa-tags:before {
  content: "\f02c";
}
.fa-book:before {
  content: "\f02d";
}
.fa-bookmark:before {
  content: "\f02e";
}
.fa-print:before {
  content: "\f02f";
}
.fa-camera:before {
  content: "\f030";
}
.fa-font:before {
  content: "\f031";
}
.fa-bold:before {
  content: "\f032";
}
.fa-italic:before {
  content: "\f033";
}
.fa-text-height:before {
  content: "\f034";
}
.fa-text-width:before {
  content: "\f035";
}
.fa-align-left:before {
  content: "\f036";
}
.fa-align-center:before {
  content: "\f037";
}
.fa-align-right:before {
  content: "\f038";
}
.fa-align-justify:before {
  content: "\f039";
}
.fa-list:before {
  content: "\f03a";
}
.fa-dedent:before,
.fa-outdent:before {
  content: "\f03b";
}
.fa-indent:before {
  content: "\f03c";
}
.fa-video-camera:before {
  content: "\f03d";
}
.fa-photo:before,
.fa-image:before,
.fa-picture-o:before {
  content: "\f03e";
}
.fa-pencil:before {
  content: "\f040";
}
.fa-map-marker:before {
  content: "\f041";
}
.fa-adjust:before {
  content: "\f042";
}
.fa-tint:before {
  content: "\f043";
}
.fa-edit:before,
.fa-pencil-square-o:before {
  content: "\f044";
}
.fa-share-square-o:before {
  content: "\f045";
}
.fa-check-square-o:before {
  content: "\f046";
}
.fa-arrows:before {
  content: "\f047";
}
.fa-step-backward:before {
  content: "\f048";
}
.fa-fast-backward:before {
  content: "\f049";
}
.fa-backward:before {
  content: "\f04a";
}
.fa-play:before {
  content: "\f04b";
}
.fa-pause:before {
  content: "\f04c";
}
.fa-stop:before {
  content: "\f04d";
}
.fa-forward:before {
  content: "\f04e";
}
.fa-fast-forward:before {
  content: "\f050";
}
.fa-step-forward:before {
  content: "\f051";
}
.fa-eject:before {
  content: "\f052";
}
.fa-chevron-left:before {
  content: "\f053";
}
.fa-chevron-right:before {
  content: "\f054";
}
.fa-plus-circle:before {
  content: "\f055";
}
.fa-minus-circle:before {
  content: "\f056";
}
.fa-times-circle:before {
  content: "\f057";
}
.fa-check-circle:before {
  content: "\f058";
}
.fa-question-circle:before {
  content: "\f059";
}
.fa-info-circle:before {
  content: "\f05a";
}
.fa-crosshairs:before {
  content: "\f05b";
}
.fa-times-circle-o:before {
  content: "\f05c";
}
.fa-check-circle-o:before {
  content: "\f05d";
}
.fa-ban:before {
  content: "\f05e";
}
.fa-arrow-left:before {
  content: "\f060";
}
.fa-arrow-right:before {
  content: "\f061";
}
.fa-arrow-up:before {
  content: "\f062";
}
.fa-arrow-down:before {
  content: "\f063";
}
.fa-mail-forward:before,
.fa-share:before {
  content: "\f064";
}
.fa-expand:before {
  content: "\f065";
}
.fa-compress:before {
  content: "\f066";
}
.fa-plus:before {
  content: "\f067";
}
.fa-minus:before {
  content: "\f068";
}
.fa-asterisk:before {
  content: "\f069";
}
.fa-exclamation-circle:before {
  content: "\f06a";
}
.fa-gift:before {
  content: "\f06b";
}
.fa-leaf:before {
  content: "\f06c";
}
.fa-fire:before {
  content: "\f06d";
}
.fa-eye:before {
  content: "\f06e";
}
.fa-eye-slash:before {
  content: "\f070";
}
.fa-warning:before,
.fa-exclamation-triangle:before {
  content: "\f071";
}
.fa-plane:before {
  content: "\f072";
}
.fa-calendar:before {
  content: "\f073";
}
.fa-random:before {
  content: "\f074";
}
.fa-comment:before {
  content: "\f075";
}
.fa-magnet:before {
  content: "\f076";
}
.fa-chevron-up:before {
  content: "\f077";
}
.fa-chevron-down:before {
  content: "\f078";
}
.fa-retweet:before {
  content: "\f079";
}
.fa-shopping-cart:before {
  content: "\f07a";
}
.fa-folder:before {
  content: "\f07b";
}
.fa-folder-open:before {
  content: "\f07c";
}
.fa-arrows-v:before {
  content: "\f07d";
}
.fa-arrows-h:before {
  content: "\f07e";
}
.fa-bar-chart-o:before,
.fa-bar-chart:before {
  content: "\f080";
}
.fa-twitter-square:before {
  content: "\f081";
}
.fa-facebook-square:before {
  content: "\f082";
}
.fa-camera-retro:before {
  content: "\f083";
}
.fa-key:before {
  content: "\f084";
}
.fa-gears:before,
.fa-cogs:before {
  content: "\f085";
}
.fa-comments:before {
  content: "\f086";
}
.fa-thumbs-o-up:before {
  content: "\f087";
}
.fa-thumbs-o-down:before {
  content: "\f088";
}
.fa-star-half:before {
  content: "\f089";
}
.fa-heart-o:before {
  content: "\f08a";
}
.fa-sign-out:before {
  content: "\f08b";
}
.fa-linkedin-square:before {
  content: "\f08c";
}
.fa-thumb-tack:before {
  content: "\f08d";
}
.fa-external-link:before {
  content: "\f08e";
}
.fa-sign-in:before {
  content: "\f090";
}
.fa-trophy:before {
  content: "\f091";
}
.fa-github-square:before {
  content: "\f092";
}
.fa-upload:before {
  content: "\f093";
}
.fa-lemon-o:before {
  content: "\f094";
}
.fa-phone:before {
  content: "\f095";
}
.fa-square-o:before {
  content: "\f096";
}
.fa-bookmark-o:before {
  content: "\f097";
}
.fa-phone-square:before {
  content: "\f098";
}
.fa-twitter:before {
  content: "\f099";
}
.fa-facebook:before {
  content: "\f09a";
}
.fa-github:before {
  content: "\f09b";
}
.fa-unlock:before {
  content: "\f09c";
}
.fa-credit-card:before {
  content: "\f09d";
}
.fa-rss:before {
  content: "\f09e";
}
.fa-hdd-o:before {
  content: "\f0a0";
}
.fa-bullhorn:before {
  content: "\f0a1";
}
.fa-bell:before {
  content: "\f0f3";
}
.fa-certificate:before {
  content: "\f0a3";
}
.fa-hand-o-right:before {
  content: "\f0a4";
}
.fa-hand-o-left:before {
  content: "\f0a5";
}
.fa-hand-o-up:before {
  content: "\f0a6";
}
.fa-hand-o-down:before {
  content: "\f0a7";
}
.fa-arrow-circle-left:before {
  content: "\f0a8";
}
.fa-arrow-circle-right:before {
  content: "\f0a9";
}
.fa-arrow-circle-up:before {
  content: "\f0aa";
}
.fa-arrow-circle-down:before {
  content: "\f0ab";
}
.fa-globe:before {
  content: "\f0ac";
}
.fa-wrench:before {
  content: "\f0ad";
}
.fa-tasks:before {
  content: "\f0ae";
}
.fa-filter:before {
  content: "\f0b0";
}
.fa-briefcase:before {
  content: "\f0b1";
}
.fa-arrows-alt:before {
  content: "\f0b2";
}
.fa-group:before,
.fa-users:before {
  content: "\f0c0";
}
.fa-chain:before,
.fa-link:before {
  content: "\f0c1";
}
.fa-cloud:before {
  content: "\f0c2";
}
.fa-flask:before {
  content: "\f0c3";
}
.fa-cut:before,
.fa-scissors:before {
  content: "\f0c4";
}
.fa-copy:before,
.fa-files-o:before {
  content: "\f0c5";
}
.fa-paperclip:before {
  content: "\f0c6";
}
.fa-save:before,
.fa-floppy-o:before {
  content: "\f0c7";
}
.fa-square:before {
  content: "\f0c8";
}
.fa-navicon:before,
.fa-reorder:before,
.fa-bars:before {
  content: "\f0c9";
}
.fa-list-ul:before {
  content: "\f0ca";
}
.fa-list-ol:before {
  content: "\f0cb";
}
.fa-strikethrough:before {
  content: "\f0cc";
}
.fa-underline:before {
  content: "\f0cd";
}
.fa-table:before {
  content: "\f0ce";
}
.fa-magic:before {
  content: "\f0d0";
}
.fa-truck:before {
  content: "\f0d1";
}
.fa-pinterest:before {
  content: "\f0d2";
}
.fa-pinterest-square:before {
  content: "\f0d3";
}
.fa-google-plus-square:before {
  content: "\f0d4";
}
.fa-google-plus:before {
  content: "\f0d5";
}
.fa-money:before {
  content: "\f0d6";
}
.fa-caret-down:before {
  content: "\f0d7";
}
.fa-caret-up:before {
  content: "\f0d8";
}
.fa-caret-left:before {
  content: "\f0d9";
}
.fa-caret-right:before {
  content: "\f0da";
}
.fa-columns:before {
  content: "\f0db";
}
.fa-unsorted:before,
.fa-sort:before {
  content: "\f0dc";
}
.fa-sort-down:before,
.fa-sort-desc:before {
  content: "\f0dd";
}
.fa-sort-up:before,
.fa-sort-asc:before {
  content: "\f0de";
}
.fa-envelope:before {
  content: "\f0e0";
}
.fa-linkedin:before {
  content: "\f0e1";
}
.fa-rotate-left:before,
.fa-undo:before {
  content: "\f0e2";
}
.fa-legal:before,
.fa-gavel:before {
  content: "\f0e3";
}
.fa-dashboard:before,
.fa-tachometer:before {
  content: "\f0e4";
}
.fa-comment-o:before {
  content: "\f0e5";
}
.fa-comments-o:before {
  content: "\f0e6";
}
.fa-flash:before,
.fa-bolt:before {
  content: "\f0e7";
}
.fa-sitemap:before {
  content: "\f0e8";
}
.fa-umbrella:before {
  content: "\f0e9";
}
.fa-paste:before,
.fa-clipboard:before {
  content: "\f0ea";
}
.fa-lightbulb-o:before {
  content: "\f0eb";
}
.fa-exchange:before {
  content: "\f0ec";
}
.fa-cloud-download:before {
  content: "\f0ed";
}
.fa-cloud-upload:before {
  content: "\f0ee";
}
.fa-user-md:before {
  content: "\f0f0";
}
.fa-stethoscope:before {
  content: "\f0f1";
}
.fa-suitcase:before {
  content: "\f0f2";
}
.fa-bell-o:before {
  content: "\f0a2";
}
.fa-coffee:before {
  content: "\f0f4";
}
.fa-cutlery:before {
  content: "\f0f5";
}
.fa-file-text-o:before {
  content: "\f0f6";
}
.fa-building-o:before {
  content: "\f0f7";
}
.fa-hospital-o:before {
  content: "\f0f8";
}
.fa-ambulance:before {
  content: "\f0f9";
}
.fa-medkit:before {
  content: "\f0fa";
}
.fa-fighter-jet:before {
  content: "\f0fb";
}
.fa-beer:before {
  content: "\f0fc";
}
.fa-h-square:before {
  content: "\f0fd";
}
.fa-plus-square:before {
  content: "\f0fe";
}
.fa-angle-double-left:before {
  content: "\f100";
}
.fa-angle-double-right:before {
  content: "\f101";
}
.fa-angle-double-up:before {
  content: "\f102";
}
.fa-angle-double-down:before {
  content: "\f103";
}
.fa-angle-left:before {
  content: "\f104";
}
.fa-angle-right:before {
  content: "\f105";
}
.fa-angle-up:before {
  content: "\f106";
}
.fa-angle-down:before {
  content: "\f107";
}
.fa-desktop:before {
  content: "\f108";
}
.fa-laptop:before {
  content: "\f109";
}
.fa-tablet:before {
  content: "\f10a";
}
.fa-mobile-phone:before,
.fa-mobile:before {
  content: "\f10b";
}
.fa-circle-o:before {
  content: "\f10c";
}
.fa-quote-left:before {
  content: "\f10d";
}
.fa-quote-right:before {
  content: "\f10e";
}
.fa-spinner:before {
  content: "\f110";
}
.fa-circle:before {
  content: "\f111";
}
.fa-mail-reply:before,
.fa-reply:before {
  content: "\f112";
}
.fa-github-alt:before {
  content: "\f113";
}
.fa-folder-o:before {
  content: "\f114";
}
.fa-folder-open-o:before {
  content: "\f115";
}
.fa-smile-o:before {
  content: "\f118";
}
.fa-frown-o:before {
  content: "\f119";
}
.fa-meh-o:before {
  content: "\f11a";
}
.fa-gamepad:before {
  content: "\f11b";
}
.fa-keyboard-o:before {
  content: "\f11c";
}
.fa-flag-o:before {
  content: "\f11d";
}
.fa-flag-checkered:before {
  content: "\f11e";
}
.fa-terminal:before {
  content: "\f120";
}
.fa-code:before {
  content: "\f121";
}
.fa-mail-reply-all:before,
.fa-reply-all:before {
  content: "\f122";
}
.fa-star-half-empty:before,
.fa-star-half-full:before,
.fa-star-half-o:before {
  content: "\f123";
}
.fa-location-arrow:before {
  content: "\f124";
}
.fa-crop:before {
  content: "\f125";
}
.fa-code-fork:before {
  content: "\f126";
}
.fa-unlink:before,
.fa-chain-broken:before {
  content: "\f127";
}
.fa-question:before {
  content: "\f128";
}
.fa-info:before {
  content: "\f129";
}
.fa-exclamation:before {
  content: "\f12a";
}
.fa-superscript:before {
  content: "\f12b";
}
.fa-subscript:before {
  content: "\f12c";
}
.fa-eraser:before {
  content: "\f12d";
}
.fa-puzzle-piece:before {
  content: "\f12e";
}
.fa-microphone:before {
  content: "\f130";
}
.fa-microphone-slash:before {
  content: "\f131";
}
.fa-shield:before {
  content: "\f132";
}
.fa-calendar-o:before {
  content: "\f133";
}
.fa-fire-extinguisher:before {
  content: "\f134";
}
.fa-rocket:before {
  content: "\f135";
}
.fa-maxcdn:before {
  content: "\f136";
}
.fa-chevron-circle-left:before {
  content: "\f137";
}
.fa-chevron-circle-right:before {
  content: "\f138";
}
.fa-chevron-circle-up:before {
  content: "\f139";
}
.fa-chevron-circle-down:before {
  content: "\f13a";
}
.fa-html5:before {
  content: "\f13b";
}
.fa-css3:before {
  content: "\f13c";
}
.fa-anchor:before {
  content: "\f13d";
}
.fa-unlock-alt:before {
  content: "\f13e";
}
.fa-bullseye:before {
  content: "\f140";
}
.fa-ellipsis-h:before {
  content: "\f141";
}
.fa-ellipsis-v:before {
  content: "\f142";
}
.fa-rss-square:before {
  content: "\f143";
}
.fa-play-circle:before {
  content: "\f144";
}
.fa-ticket:before {
  content: "\f145";
}
.fa-minus-square:before {
  content: "\f146";
}
.fa-minus-square-o:before {
  content: "\f147";
}
.fa-level-up:before {
  content: "\f148";
}
.fa-level-down:before {
  content: "\f149";
}
.fa-check-square:before {
  content: "\f14a";
}
.fa-pencil-square:before {
  content: "\f14b";
}
.fa-external-link-square:before {
  content: "\f14c";
}
.fa-share-square:before {
  content: "\f14d";
}
.fa-compass:before {
  content: "\f14e";
}
.fa-toggle-down:before,
.fa-caret-square-o-down:before {
  content: "\f150";
}
.fa-toggle-up:before,
.fa-caret-square-o-up:before {
  content: "\f151";
}
.fa-toggle-right:before,
.fa-caret-square-o-right:before {
  content: "\f152";
}
.fa-euro:before,
.fa-eur:before {
  content: "\f153";
}
.fa-gbp:before {
  content: "\f154";
}
.fa-dollar:before,
.fa-usd:before {
  content: "\f155";
}
.fa-rupee:before,
.fa-inr:before {
  content: "\f156";
}
.fa-cny:before,
.fa-rmb:before,
.fa-yen:before,
.fa-jpy:before {
  content: "\f157";
}
.fa-ruble:before,
.fa-rouble:before,
.fa-rub:before {
  content: "\f158";
}
.fa-won:before,
.fa-krw:before {
  content: "\f159";
}
.fa-bitcoin:before,
.fa-btc:before {
  content: "\f15a";
}
.fa-file:before {
  content: "\f15b";
}
.fa-file-text:before {
  content: "\f15c";
}
.fa-sort-alpha-asc:before {
  content: "\f15d";
}
.fa-sort-alpha-desc:before {
  content: "\f15e";
}
.fa-sort-amount-asc:before {
  content: "\f160";
}
.fa-sort-amount-desc:before {
  content: "\f161";
}
.fa-sort-numeric-asc:before {
  content: "\f162";
}
.fa-sort-numeric-desc:before {
  content: "\f163";
}
.fa-thumbs-up:before {
  content: "\f164";
}
.fa-thumbs-down:before {
  content: "\f165";
}
.fa-youtube-square:before {
  content: "\f166";
}
.fa-youtube:before {
  content: "\f167";
}
.fa-xing:before {
  content: "\f168";
}
.fa-xing-square:before {
  content: "\f169";
}
.fa-youtube-play:before {
  content: "\f16a";
}
.fa-dropbox:before {
  content: "\f16b";
}
.fa-stack-overflow:before {
  content: "\f16c";
}
.fa-instagram:before {
  content: "\f16d";
}
.fa-flickr:before {
  content: "\f16e";
}
.fa-adn:before {
  content: "\f170";
}
.fa-bitbucket:before {
  content: "\f171";
}
.fa-bitbucket-square:before {
  content: "\f172";
}
.fa-tumblr:before {
  content: "\f173";
}
.fa-tumblr-square:before {
  content: "\f174";
}
.fa-long-arrow-down:before {
  content: "\f175";
}
.fa-long-arrow-up:before {
  content: "\f176";
}
.fa-long-arrow-left:before {
  content: "\f177";
}
.fa-long-arrow-right:before {
  content: "\f178";
}
.fa-apple:before {
  content: "\f179";
}
.fa-windows:before {
  content: "\f17a";
}
.fa-android:before {
  content: "\f17b";
}
.fa-linux:before {
  content: "\f17c";
}
.fa-dribbble:before {
  content: "\f17d";
}
.fa-skype:before {
  content: "\f17e";
}
.fa-foursquare:before {
  content: "\f180";
}
.fa-trello:before {
  content: "\f181";
}
.fa-female:before {
  content: "\f182";
}
.fa-male:before {
  content: "\f183";
}
.fa-gittip:before {
  content: "\f184";
}
.fa-sun-o:before {
  content: "\f185";
}
.fa-moon-o:before {
  content: "\f186";
}
.fa-archive:before {
  content: "\f187";
}
.fa-bug:before {
  content: "\f188";
}
.fa-vk:before {
  content: "\f189";
}
.fa-weibo:before {
  content: "\f18a";
}
.fa-renren:before {
  content: "\f18b";
}
.fa-pagelines:before {
  content: "\f18c";
}
.fa-stack-exchange:before {
  content: "\f18d";
}
.fa-arrow-circle-o-right:before {
  content: "\f18e";
}
.fa-arrow-circle-o-left:before {
  content: "\f190";
}
.fa-toggle-left:before,
.fa-caret-square-o-left:before {
  content: "\f191";
}
.fa-dot-circle-o:before {
  content: "\f192";
}
.fa-wheelchair:before {
  content: "\f193";
}
.fa-vimeo-square:before {
  content: "\f194";
}
.fa-turkish-lira:before,
.fa-try:before {
  content: "\f195";
}
.fa-plus-square-o:before {
  content: "\f196";
}
.fa-space-shuttle:before {
  content: "\f197";
}
.fa-slack:before {
  content: "\f198";
}
.fa-envelope-square:before {
  content: "\f199";
}
.fa-wordpress:before {
  content: "\f19a";
}
.fa-openid:before {
  content: "\f19b";
}
.fa-institution:before,
.fa-bank:before,
.fa-university:before {
  content: "\f19c";
}
.fa-mortar-board:before,
.fa-graduation-cap:before {
  content: "\f19d";
}
.fa-yahoo:before {
  content: "\f19e";
}
.fa-google:before {
  content: "\f1a0";
}
.fa-reddit:before {
  content: "\f1a1";
}
.fa-reddit-square:before {
  content: "\f1a2";
}
.fa-stumbleupon-circle:before {
  content: "\f1a3";
}
.fa-stumbleupon:before {
  content: "\f1a4";
}
.fa-delicious:before {
  content: "\f1a5";
}
.fa-digg:before {
  content: "\f1a6";
}
.fa-pied-piper:before {
  content: "\f1a7";
}
.fa-pied-piper-alt:before {
  content: "\f1a8";
}
.fa-drupal:before {
  content: "\f1a9";
}
.fa-joomla:before {
  content: "\f1aa";
}
.fa-language:before {
  content: "\f1ab";
}
.fa-fax:before {
  content: "\f1ac";
}
.fa-building:before {
  content: "\f1ad";
}
.fa-child:before {
  content: "\f1ae";
}
.fa-paw:before {
  content: "\f1b0";
}
.fa-spoon:before {
  content: "\f1b1";
}
.fa-cube:before {
  content: "\f1b2";
}
.fa-cubes:before {
  content: "\f1b3";
}
.fa-behance:before {
  content: "\f1b4";
}
.fa-behance-square:before {
  content: "\f1b5";
}
.fa-steam:before {
  content: "\f1b6";
}
.fa-steam-square:before {
  content: "\f1b7";
}
.fa-recycle:before {
  content: "\f1b8";
}
.fa-automobile:before,
.fa-car:before {
  content: "\f1b9";
}
.fa-cab:before,
.fa-taxi:before {
  content: "\f1ba";
}
.fa-tree:before {
  content: "\f1bb";
}
.fa-spotify:before {
  content: "\f1bc";
}
.fa-deviantart:before {
  content: "\f1bd";
}
.fa-soundcloud:before {
  content: "\f1be";
}
.fa-database:before {
  content: "\f1c0";
}
.fa-file-pdf-o:before {
  content: "\f1c1";
}
.fa-file-word-o:before {
  content: "\f1c2";
}
.fa-file-excel-o:before {
  content: "\f1c3";
}
.fa-file-powerpoint-o:before {
  content: "\f1c4";
}
.fa-file-photo-o:before,
.fa-file-picture-o:before,
.fa-file-image-o:before {
  content: "\f1c5";
}
.fa-file-zip-o:before,
.fa-file-archive-o:before {
  content: "\f1c6";
}
.fa-file-sound-o:before,
.fa-file-audio-o:before {
  content: "\f1c7";
}
.fa-file-movie-o:before,
.fa-file-video-o:before {
  content: "\f1c8";
}
.fa-file-code-o:before {
  content: "\f1c9";
}
.fa-vine:before {
  content: "\f1ca";
}
.fa-codepen:before {
  content: "\f1cb";
}
.fa-jsfiddle:before {
  content: "\f1cc";
}
.fa-life-bouy:before,
.fa-life-buoy:before,
.fa-life-saver:before,
.fa-support:before,
.fa-life-ring:before {
  content: "\f1cd";
}
.fa-circle-o-notch:before {
  content: "\f1ce";
}
.fa-ra:before,
.fa-rebel:before {
  content: "\f1d0";
}
.fa-ge:before,
.fa-empire:before {
  content: "\f1d1";
}
.fa-git-square:before {
  content: "\f1d2";
}
.fa-git:before {
  content: "\f1d3";
}
.fa-hacker-news:before {
  content: "\f1d4";
}
.fa-tencent-weibo:before {
  content: "\f1d5";
}
.fa-qq:before {
  content: "\f1d6";
}
.fa-wechat:before,
.fa-weixin:before {
  content: "\f1d7";
}
.fa-send:before,
.fa-paper-plane:before {
  content: "\f1d8";
}
.fa-send-o:before,
.fa-paper-plane-o:before {
  content: "\f1d9";
}
.fa-history:before {
  content: "\f1da";
}
.fa-circle-thin:before {
  content: "\f1db";
}
.fa-header:before {
  content: "\f1dc";
}
.fa-paragraph:before {
  content: "\f1dd";
}
.fa-sliders:before {
  content: "\f1de";
}
.fa-share-alt:before {
  content: "\f1e0";
}
.fa-share-alt-square:before {
  content: "\f1e1";
}
.fa-bomb:before {
  content: "\f1e2";
}
.fa-soccer-ball-o:before,
.fa-futbol-o:before {
  content: "\f1e3";
}
.fa-tty:before {
  content: "\f1e4";
}
.fa-binoculars:before {
  content: "\f1e5";
}
.fa-plug:before {
  content: "\f1e6";
}
.fa-slideshare:before {
  content: "\f1e7";
}
.fa-twitch:before {
  content: "\f1e8";
}
.fa-yelp:before {
  content: "\f1e9";
}
.fa-newspaper-o:before {
  content: "\f1ea";
}
.fa-wifi:before {
  content: "\f1eb";
}
.fa-calculator:before {
  content: "\f1ec";
}
.fa-paypal:before {
  content: "\f1ed";
}
.fa-google-wallet:before {
  content: "\f1ee";
}
.fa-cc-visa:before {
  content: "\f1f0";
}
.fa-cc-mastercard:before {
  content: "\f1f1";
}
.fa-cc-discover:before {
  content: "\f1f2";
}
.fa-cc-amex:before {
  content: "\f1f3";
}
.fa-cc-paypal:before {
  content: "\f1f4";
}
.fa-cc-stripe:before {
  content: "\f1f5";
}
.fa-bell-slash:before {
  content: "\f1f6";
}
.fa-bell-slash-o:before {
  content: "\f1f7";
}
.fa-trash:before {
  content: "\f1f8";
}
.fa-copyright:before {
  content: "\f1f9";
}
.fa-at:before {
  content: "\f1fa";
}
.fa-eyedropper:before {
  content: "\f1fb";
}
.fa-paint-brush:before {
  content: "\f1fc";
}
.fa-birthday-cake:before {
  content: "\f1fd";
}
.fa-area-chart:before {
  content: "\f1fe";
}
.fa-pie-chart:before {
  content: "\f200";
}
.fa-line-chart:before {
  content: "\f201";
}
.fa-lastfm:before {
  content: "\f202";
}
.fa-lastfm-square:before {
  content: "\f203";
}
.fa-toggle-off:before {
  content: "\f204";
}
.fa-toggle-on:before {
  content: "\f205";
}
.fa-bicycle:before {
  content: "\f206";
}
.fa-bus:before {
  content: "\f207";
}
.fa-ioxhost:before {
  content: "\f208";
}
.fa-angellist:before {
  content: "\f209";
}
.fa-cc:before {
  content: "\f20a";
}
.fa-shekel:before,
.fa-sheqel:before,
.fa-ils:before {
  content: "\f20b";
}
.fa-meanpath:before {
  content: "\f20c";
}