Megatest

(declare (unit client))

(declare (uses common))
(declare (uses db))
(declare (uses tasks)) ;; tasks are where stuff is maintained about what is running.








(include "common_records.scm")
(include "db_records.scm")

;; client:get-signature
(define (client:get-signature)
  (if *my-client-signature* *my-client-signature*
      (let ((sig (conc (get-host-name) " " (current-process-id))))
	(set! *my-client-signature* sig)
	*my-client-signature*)))

;; Not currently used! But, I think it *should* be used!!!
#;(define (client:logout serverdat)
  (let ((ok (and (socket? serverdat)
		 (cdb:logout serverdat *toppath* (client:get-signature)))))
    ok))

(define (client:setup areapath #!key (remaining-tries 100) (failed-connects 0))
  (client:setup-http areapath remaining-tries: remaining-tries failed-connects: failed-connects))

;; Do all the connection work, look up the transport type and set up the
;; connection if required.
;;
;; There are two scenarios. 
;;   1. We are a test manager and we received *transport-type* and *runremote* via cmdline
;;   2. We are a run tests, list runs or other interactive process and we must figure out
;;      *transport-type* and *runremote* from the monitor.db
;;
;; client:setup
;;
;; lookup_server, need to remove *runremote* stuff
;;
 










(define (client:setup-http areapath #!key (remaining-tries 100) (failed-connects 0)(area-dat #f))
  (mutex-lock! *rmt-mutex*)
  (let ((res (client:setup-http-baby areapath remaining-tries: remaining-tries failed-connects: failed-connects area-dat: area-dat)))
    (mutex-unlock! *rmt-mutex*)
    res))

(define (client:setup-http-baby areapath #!key (remaining-tries 100) (failed-connects 0)(area-dat #f))
  (debug:print-info 2 *default-log-port* "client:setup remaining-tries=" remaining-tries)
  (server:start-and-wait areapath)
  (if (<= remaining-tries 0)
      (begin
	(debug:print-error 0 *default-log-port* "failed to start or connect to server")
	(exit 1))
      ;;
      ;; Alternatively here, we can get the list of candidate servers and work our way
      ;; through them searching for a good one.
      ;;
      (let* ((server-dat (server:choose-server areapath 'best))
	     (runremote  (or area-dat *runremote*)))
	(if (not server-dat) ;; no server found


	    (client:setup-http-baby areapath remaining-tries: (- remaining-tries 1))
	    (match server-dat
	      ((host port start-time server-id pid)
	       (debug:print-info 4 *default-log-port* "client:setup server-dat=" server-dat ", remaining-tries=" remaining-tries)
	       (if (and (not area-dat)
			(not *runremote*))
                   (begin       


		     (set! *runremote* (make-remote))
                     (let* ((server-info (remote-server-info *runremote*))) 

                       (if server-info
                           (begin
                             (remote-server-url-set! *runremote* (server:record->url server-info))
                             (remote-server-id-set! *runremote* (server:record->id server-info)))))))

	       (if (and host port server-id)
		   (let* ((start-res (http-transport:client-connect host port server-id))
			  (ping-res  (rmt:login-no-auto-client-setup start-res)))
		     (if (and start-res
			      ping-res)
			 (let ((runremote (or area-dat *runremote*))) ;; it might have been generated only a few statements ago
			   (if runremote
			       (begin
				 (remote-conndat-set! runremote start-res) ;; (hash-table-set! runremote run-id start-res)
				 (debug:print-info 2 *default-log-port* "connected to " (http-transport:server-dat-make-url start-res))
				 start-res)
			       (client:setup-http-baby areapath remaining-tries: (- remaining-tries 1))))
			 (begin    ;; login failed but have a server record, clean out the record and try again
			   (debug:print-info 0 *default-log-port* "client:setup, login unsuccessful, will attempt to start server ... start-res=" start-res ", server-dat=" server-dat) ;; had runid.  Fixes part of Randy;s ticket 1405717332
			   (http-transport:close-connections *runremote*)
			   (thread-sleep! 1)
			   (client:setup-http-baby areapath remaining-tries: (- remaining-tries 1))
			   )))
		   (begin    ;; no server registered
		     ;; (server:kind-run areapath)
		     (server:start-and-wait areapath)
		     (debug:print-info 0 *default-log-port* "client:setup, no server registered, remaining-tries=" remaining-tries)
		     (thread-sleep! 1) ;; (+ 5 (random (- 20 remaining-tries))))  ;; give server a little time to start up, randomize a little to avoid start storms.
		     (client:setup-http-baby areapath remaining-tries: (- remaining-tries 1)))))
	      (else
	       (debug:print 0 *default-log-port* "ERROR: malformed server-dat="server-dat)))))))

    ((abort) "ABORT")
    ((skip) "SKIP")
    (else "FAIL")))

(define (common:logpro-exit-code->test-status exit-code)
  (status-sym->string (common:logpro-exit-code->status-sym exit-code)))


(defstruct remote
  (hh-dat            (let ((res (or (server:choose-server *toppath* 'homehost)
				    (cons #f #f))))
		       (assert (pair? res)(conc "FATAL: hh-dat should be a pair, got "res))
		       res))
  (server-url        #f) ;; (server:check-if-running *toppath*) #f))
  (server-id         #f)
  (server-info       (if *toppath* (server:check-if-running *toppath*) #f))
  (last-server-check 0)  ;; last time we checked to see if the server was alive
  (connect-time      (current-seconds))

  (conndat           #f)
  (transport         *transport-type*)
  (server-timeout    (server:expiration-timeout))
  (force-server      #f)
  (ro-mode           #f)  
  (ro-mode-checked   #f)) ;; flag that indicates we have checked for ro-mode








;; launching and hosts
(defstruct host
  (reachable    #f)
  (last-update  0)
  (last-used    0)
  (last-cpuload 1))

	  (db:hoh-set! dat key1 key2 val)))))

(define (db:hoh-get dat key1 key2)
  (let* ((subhash (hash-table-ref/default dat key1 #f)))
    (and subhash
	 (hash-table-ref/default subhash key2 #f))))

(define (db:get-cache-stmth dbdat run-id db stmt)
  (let* (;; (dbdat       (dbfile:get-dbdat dbstruct run-id))
	 (stmt-cache  (dbr:dbdat-stmt-cache dbdat))
	 (stmth       (db:hoh-get stmt-cache db stmt)))
    (or stmth
	(let* ((newstmth (sqlite3:prepare db stmt)))
	  (db:hoh-set! stmt-cache db stmt newstmth)
	  newstmth))))

;;======================================================================
;; SQLITE3 HELPERS
;;======================================================================

(define (db:general-sqlite-error-dump exn stmt . params)
  (let ((err-status ((condition-property-accessor 'sqlite3 'status #f) exn))) ;; RADT ... how does this work?
    ;; check for (exn sqlite3) ((condition-property-accessor 'exn 'message) exn)

          (if (and (equal? uname "n/a")
                   (equal? item-path "")) ;; this is a toplevel test
              ;; what to do with toplevel? call rollup?
              (begin
                (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
                (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
              (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))
        db
        "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING','REMOTEHOSTSTART');"
        run-id deadtime)

       ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
       ;;
       ;; (db:delay-if-busy dbdat)
       (sqlite3:for-each-row
        (lambda (test-id run-dir uname testname item-path)
          (if (and (equal? uname "n/a")
                   (equal? item-path "")) ;; this is a toplevel test
              ;; what to do with toplevel? call rollup?
              (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
              (set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched))))
        db
        "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400 AND state IN ('LAUNCHED');"
        run-id)
       
       (debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")
       (if (and (null? incompleted)
                (null? oldlaunched)
                (null? toplevels))
           #f

    (debug:print-info 4  *default-log-port* "running-deadtime = " running-deadtime)
    (debug:print-info 4  *default-log-port* "deadtime-trim = " deadtime-trim)

    (db:with-db 
     dbstruct run-id #f
     (lambda (dbdat db)
       (let* ((stmth1 (db:get-cache-stmth
		       dbdat run-id db
		       "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests 
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?)
                                          AND state IN ('RUNNING');"))
	      (stmth2 (db:get-cache-stmth
		       dbdat run-id db
		       "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests 
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?)
                                          AND state IN ('REMOTEHOSTSTART');"))
	      (stmth3 (db:get-cache-stmth
		       dbdat run-id db
		       "SELECT id,rundir,uname,testname,item_path FROM tests
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400
                                          AND state IN ('LAUNCHED');")))
	 ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
	 ;;
	 ;; HOWEVER: this code in run:test seems to work fine
	 ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)

  (let* ((res      #f))
    (db:with-db
     dbstruct #f #f  ;; for the moment vars are only stored in main.db
     (lambda (dbdat db)
       (sqlite3:for-each-row
        (lambda (val)
          (set! res val))
        db
        "SELECT val FROM metadat WHERE var=?;" var)
       ;; convert to number if can
       (if (string? res)
           (let ((valnum (string->number res)))
             (if valnum (set! res valnum))))
       res))))

(define (db:inc-var dbstruct var)
  (db:with-db dbstruct #f #t 
	      (lambda (dbdat db)
		(sqlite3:execute db "UPDATE metadat SET val=val+1 WHERE var=?;" var))))

(define (db:dec-var dbstruct var)
  (db:with-db dbstruct #f #t 
	      (lambda (dbdat db)
		(sqlite3:execute db "UPDATE metadat SET val=val-1 WHERE var=?;" var))))

;; This was part of db:get-var. It was used to estimate the load on
;; the database files.
;;
;; scale by 10, average with current value.
;;     (set! *global-delta* (/ (+ *global-delta* (* (- (current-milliseconds) start-ms)
;; 						 (if throttle throttle 0.01)))
;; 			    2))
;;     (if (> (abs (- *last-global-delta-printed* *global-delta*)) 0.08) ;; don't print all the time, only if it changes a bit
;; 	(begin
;; 	  (debug:print-info 4 *default-log-port* "launch throttle factor=" *global-delta*)
;; 	  (set! *last-global-delta-printed* *global-delta*)))

(define (db:set-var dbstruct var val)
  (db:with-db dbstruct #f #t 
	      (lambda (dbdat db)
		(sqlite3:execute db "INSERT OR REPLACE INTO metadat (var,val) VALUES (?,?);" var val))))

(define (db:add-var dbstruct var val)
  (db:with-db dbstruct #f #t 
	      (lambda (dbdat db)
		(sqlite3:execute db "UPDATE metadat SET val=val+? WHERE var=?;" val var))))

(define (db:del-var dbstruct var)
  (db:with-db dbstruct #f #t 
	      (lambda (dbdat db)
		(sqlite3:execute db "DELETE FROM metadat WHERE var=?;" var))))

;;======================================================================
;; no-sync.db - small bits of data to be shared between servers
;;======================================================================

(define (db:no-sync-db db-in)
  (if db-in

   #f ;; this is for the main runs db
   #f ;; does not modify db
   (lambda (dbdat db)
     (let ((res #f))
       (sqlite3:for-each-row
	(lambda (runname)
	  (set! res runname))
	db
	"SELECT runname FROM runs WHERE id=?;"
	run-id)
       res))))

(define (db:get-run-key-val dbstruct run-id key)
  (db:with-db
   dbstruct
   #f

    (debug:print 2 *default-log-port* "NOTE: using target " (string-intersperse (map cadr keyvals) "/") " for this run")
    (if (and runname (null? (filter (lambda (x)(not x)) keyvals))) ;; there must be a better way to "apply and"
	(db:with-db
	 dbstruct #f #f
	 (lambda (dbdat db)
	   ;; (debug:print 0 *default-log-port* "Got here 1.")
	   (let ((res #f))
	     (apply sqlite3:execute db

		    (conc "INSERT OR IGNORE INTO runs (runname,state,status,owner,event_time,contour"
			  comma keystr ") VALUES (?,?,?,?,strftime('%s','now'),?" comma valslots ");")
		    allvals)
	     (apply sqlite3:for-each-row 
		    (lambda (id)
		      (set! res id))
		    db
		    (let ((qry (conc "SELECT id FROM runs WHERE (runname=? " andstr key=?str ");")))
		      qry)

   #f
   (lambda (dbdat db)
     (let ((numruns 0))
       (debug:print-info 11 *default-log-port* "db:get-num-runs START " runpatt)
       (sqlite3:for-each-row 
	(lambda (count)
	  (set! numruns count))
	db
	"SELECT COUNT(id) FROM runs WHERE runname LIKE ? AND state != 'deleted';" runpatt)
       (debug:print-info 11 *default-log-port* "db:get-num-runs END " runpatt)
       numruns))))

;; just get count of runs
(define (db:get-runs-cnt-by-patt dbstruct runpatt targetpatt keys)
  (db:with-db
   dbstruct

   run-id
   #f
   (lambda (dbdat db)
     (sqlite3:fold-row
	(lambda (res state status count)
	  (cons (list state status count) res))
	'()
	db
	"SELECT state,status,count(id) AS count FROM tests WHERE run_id=? AND NOT(uname='n/a' AND item_path='') GROUP BY state,status;"
	run-id))))

;; Update run_stats for given run_id
;; input data is a list (state status count)
;;
(define (db:update-run-stats dbstruct run-id stats)
  ;; (mutex-lock! *db-transaction-mutex*)
  (db:with-db
   dbstruct
   #f
   #f

   (lambda (dbdat db)
     ;; remove previous data
     
     (let* ((stmt1 (sqlite3:prepare db "DELETE FROM run_stats WHERE run_id=? AND state=? AND status=?;"))
	    (stmt2 (sqlite3:prepare db "INSERT INTO run_stats (run_id,state,status,count) VALUES (?,?,?,?);"))
	    (res
	     (sqlite3:with-transaction
	      db
	      (lambda ()
		(for-each
		 (lambda (dat)
		   (sqlite3:execute stmt1 run-id (car dat)(cadr dat))
		   (apply sqlite3:execute stmt2 run-id dat))
		 stats)))))
       (sqlite3:finalize! stmt1)
       (sqlite3:finalize! stmt2)
       ;; (mutex-unlock! *db-transaction-mutex*)
       res))))

(define (db:get-main-run-stats dbstruct run-id)
  (db:with-db
   dbstruct
   #f ;; this data comes from main
   #f
   (lambda (dbdat db)
     (sqlite3:fold-row
	(lambda (res state status count)
	  (cons (list state status count) res))
	'()
	db
	"SELECT state,status,count FROM run_stats WHERE run_id=? AND run_id IN (SELECT id FROM runs WHERE state NOT IN ('DELETED','deleted'));"
	run-id))))

(define (db:print-current-query-stats)
  ;; generate stats from *db-api-call-time*
  (let ((ordered-keys (sort (hash-table-keys *db-api-call-time*)
			    (lambda (a b)
			      (let ((sum-a (common:sum (hash-table-ref *db-api-call-time* a)))

   #f
   #f
   (lambda (dbdat db)
     (let ((run-ids '()))
       (sqlite3:for-each-row
	(lambda (run-id)
	  (set! run-ids (cons run-id run-ids)))
	db
	"SELECT id FROM runs WHERE state != 'deleted' ORDER BY event_time DESC;")
    (reverse run-ids)))))

;; get some basic run stats
;;
;; data structure:
;;
;; ( (runname (( state  count ) ... ))

    ;; First get all the runname/run-ids
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (run-id runname)
	  (set! runs-info (cons (list run-id runname) runs-info)))
	db
	"SELECT id,runname FROM runs WHERE state != 'deleted' ORDER BY event_time DESC;"))) ;; If you change this to the more logical ASC please adjust calls to db:get-run-stats
    ;; for each run get stats data
    (for-each
     (lambda (run-info)
       ;; get the net state/status counts for this run
       (let* ((run-id   (car  run-info))
	      (run-name (cadr run-info)))
	 (db:with-db
	  dbstruct
	  run-id
	  #f
	  (lambda (dbdat db)
	    (sqlite3:for-each-row
	     (lambda (state status count)
	       (let ((netstate (if (equal? state "COMPLETED") status state)))
		 (if (string? netstate)
		     (begin
		       (hash-table-set! totals netstate (+ (hash-table-ref/default totals netstate 0) count))
		       (hash-table-set! curr   netstate (+ (hash-table-ref/default curr   netstate 0) count))))))
	     db
	     "SELECT state,status,count(id) FROM tests AS t WHERE run_id=? GROUP BY state,status ORDER BY state,status DESC;"
             run-id)
	    ;; add the per run counts to res
	    (for-each (lambda (state)
			(set! res (cons (list run-name state (hash-table-ref curr state)) res)))
		      (sort (hash-table-keys curr) string>=))
	    (set! curr (make-hash-table))))))
     runs-info)

      ;; (hash-table-set! *run-info-cache* run-id finalres)
      finalres)))

(define (db:set-comment-for-run dbstruct run-id comment)
  (db:with-db
   dbstruct #f #f
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE runs SET comment=? WHERE id=?;" comment ;; (sdb:qry 'getid comment)
		      run-id))))

;; does not (obviously!) removed dependent data. But why not!!?
(define (db:delete-run dbstruct run-id)
  (db:with-db
   dbstruct #f #f
   (lambda (dbdat db)
     (sqlite3:with-transaction
      db
      (lambda ()
        (sqlite3:execute db "DELETE FROM test_steps WHERE test_id IN (SELECT id FROM tests WHERE run_id=?);" run-id)
        (sqlite3:execute db "DELETE FROM test_data WHERE test_id IN (SELECT id FROM tests WHERE run_id=?);"  run-id)
        (sqlite3:execute db "UPDATE tests SET state='DELETED',comment='' WHERE run_id=?;" run-id)
        ;; (db:delay-if-busy dbdat)
        (sqlite3:execute db "UPDATE runs SET state='deleted',comment='' WHERE id=?;" run-id))))))

(define (db:update-run-event_time dbstruct run-id)
  (db:with-db
   dbstruct #f #t
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE runs SET event_time=strftime('%s','now') WHERE id=?;" run-id))))

(define (db:lock/unlock-run dbstruct run-id lock unlock user)
  (db:with-db
   dbstruct #f #t
   (lambda (dbdat db)
     (let ((newlockval (if lock "locked"
			   (if unlock
			       "unlocked"
			       "locked")))) ;; semi-failsafe
       (sqlite3:execute db "UPDATE runs SET state=? WHERE id=?;" newlockval run-id)
       (sqlite3:execute db "INSERT INTO access_log (user,accessed,args) VALUES(?,strftime('%s','now'),?);"
			user (conc newlockval " " run-id))
       (debug:print-info 1 *default-log-port* "" newlockval " run number " run-id)))))

(define (db:set-run-status dbstruct run-id status msg)
  (db:with-db
   dbstruct #f #f
   (lambda (dbdat db)
       (if msg
         (sqlite3:execute db "UPDATE runs SET status=?,comment=? WHERE id=?;" status msg run-id)
         (sqlite3:execute db "UPDATE runs SET status=? WHERE id=?;" status run-id)))))

(define (db:set-run-state-status-db db run-id state status )
  (sqlite3:execute db "UPDATE runs SET status=?,state=? WHERE id=?;" status state run-id))

(define (db:set-run-state-status dbstruct run-id state status )
  (db:with-db
   dbstruct #f #f
   (lambda (dbdat db)
     (db:set-run-state-status-db db run-id state status))))
     
(define (db:get-run-status dbstruct run-id)
  (let ((res "n/a"))
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (status)
	  (set! res status))
	db
	"SELECT status FROM runs WHERE id=?;" 
	run-id)
       res))))

(define (db:get-run-state dbstruct run-id)
  (let ((res "n/a"))
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (status)
	  (set! res status))
	db
	"SELECT state FROM runs WHERE id=?;" 
	run-id)
       res))))


;;======================================================================
;; K E Y S
;;======================================================================

     (lambda (dbdat db)
       (for-each 
	(lambda (key)
	  (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	    (sqlite3:for-each-row 
	     (lambda (key-val)
	       (set! res (cons (list key (if (string? key-val) key-val "")) res))) ;; replace non-string bad values with empty string to prevent crashes. This scenario can happen when Megatest is killed on updating the db
	     db qry run-id)))
	keys)))
       (reverse res)))

;; get key vals for a given run-id
(define (db:get-key-vals dbstruct run-id)
  (let* ((keys (db:get-keys dbstruct))
	 (res  '()))
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (for-each 
	(lambda (key)
	  (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	    ;; (db:delay-if-busy dbdat)
	    (sqlite3:for-each-row 
	     (lambda (key-val)
	       (set! res (cons (if (string? key-val) key-val "") res))) ;; check that the key-val is a string for cases where a crash injected bad data in the megatest.db
	     db qry run-id)))
	keys)))
    (let ((final-res (reverse res)))
      (hash-table-set! *keyvals* run-id final-res)
      final-res)))

;; The target is keyval1/keyval2..., cached in *target* as it is used often
(define (db:get-target dbstruct run-id)

          '()
          (begin
            (db:with-db dbstruct #f #f ;; #f means work with the zeroth db - i.e. the runs db
                        (lambda (dbdat db)
                          (apply sqlite3:for-each-row
                                 (lambda (id)
                                   (set! prev-run-ids (cons id prev-run-ids)))
                                 db
                                 (conc "SELECT id FROM runs WHERE " qrystr " AND state != 'deleted' AND id != ?;")
                                 (append kvalues (list run-id)))))
            prev-run-ids)))))

;;======================================================================
;;  T E S T S
;;======================================================================

  (let ((res            #f))
    (db:with-db dbstruct run-id #f
		(lambda (dbdat db)
		  (sqlite3:for-each-row
		   (lambda (run-id testname item-path state status)
		     ;; id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
		     (set! res (vector test-id run-id testname state status -1 "" -1 -1 "" "-" item-path -1 "-" "-")))
		   db 
		   "SELECT run_id,testname,item_path,state,status FROM tests WHERE id=? and run_id=?;" 
		   test-id run-id)))
    res))

;; get a useful subset of the tests data (used in dashboard
;; use db:mintest-get-{id ,run_id,testname ...}
;;
(define (db:get-tests-for-run-mindata dbstruct run-id testpatt states statuses not-in)

(define (db:delete-test-records dbstruct run-id test-id)
  (db:general-call dbstruct run-id 'delete-test-step-records (list test-id))
  (db:general-call dbstruct run-id 'delete-test-data-records (list test-id))
  (db:with-db
   dbstruct run-id #f
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE tests SET state='DELETED',status='n/a',comment='' WHERE id=?;" test-id))))

;; 
(define (db:delete-old-deleted-test-records dbstruct)
  (let ((targtime (- (current-seconds)
		     (or (configf:lookup-number *configdat* "setup" "keep-deleted-records")
			 (* 30 24 60 60))))) ;; one month in the past
    (db:with-db
     dbstruct
     0
     #t
     (lambda (dbdat db)
       (sqlite3:with-transaction
	db
	(lambda ()
	  (sqlite3:execute db "DELETE FROM test_steps WHERE test_id IN (SELECT id FROM tests WHERE state='DELETED' AND event_time<?);" targtime)
	  (sqlite3:execute db "DELETE FROM test_data WHERE test_id IN (SELECT id FROM tests WHERE state='DELETED' AND event_time<?);" targtime)
	  (sqlite3:execute db "DELETE FROM tests WHERE state='DELETED' AND event_time<?;" targtime)))))))

;; set tests with state currstate and status currstatus to newstate and newstatus
;; use currstate = #f and or currstatus = #f to apply to any state or status respectively
;; WARNING: SQL injection risk. NB// See new but not yet used "faster" version below
;;
;;  AND NOT (item_path='' AND testname in (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")))
;;  (debug:print 0 *default-log-port* "QRY: " qry)

;;      NOTE: run-id is not used
;; ;;
(define (db:test-set-state-status dbstruct run-id test-id newstate newstatus newcomment)
  (db:with-db
   dbstruct
   run-id #f
   (lambda (dbdat db)
     (db:test-set-state-status-db db run-id test-id newstate newstatus newcomment))))

(define (db:test-set-state-status-db db run-id test-id newstate newstatus newcomment)
  (cond
   ((and newstate newstatus newcomment)
    (sqlite3:execute db "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;" newstate newstatus newcomment ;; (sdb:qry 'getid newcomment)
		     test-id))
   ((and newstate newstatus)
    (sqlite3:execute db "UPDATE tests SET state=?,status=? WHERE id=?;" newstate newstatus test-id))
   (else
    (if newstate   (sqlite3:execute db "UPDATE tests SET state=?   WHERE id=?;" newstate   test-id))
    (if newstatus  (sqlite3:execute db "UPDATE tests SET status=?  WHERE id=?;" newstatus  test-id))
    (if newcomment (sqlite3:execute db "UPDATE tests SET comment=? WHERE id=?;" newcomment ;; (sdb:qry 'getid newcomment)
				    test-id))))
  ;; (mt:process-triggers dbstruct run-id test-id newstate newstatus)) ;; NOTE: Moved into calling function
  )

;; NEW BEHAVIOR: Count tests running in all runs!
;;
(define (db:get-count-tests-running dbstruct run-id) ;; fastmode)
  (let* ((qry ;; (if fastmode
		;;   "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '') LIMIT 1;"
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '');")) ;; )
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (let* ((stmth (db:get-cache-stmth dbdat run-id db qry)))
       (sqlite3:first-result stmth))))))

;; NEW BEHAVIOR: Count tests running in only one run!
;;
(define (db:get-count-tests-actually-running dbstruct run-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (sqlite3:first-result
      db
      ;; WARNING BUG EDIT ME - merged from v1.55 - not sure what is right here ...
      ;; "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id NOT IN (SELECT id FROM runs WHERE state='deleted') AND NOT (uname = 'n/a' AND item_path = '');")
      "SELECT count(id) FROM tests WHERE state in ('RUNNING','REMOTEHOSTSTART','LAUNCHED') AND run_id=?;" 
      run-id)))) ;; NOT IN (SELECT id FROM runs WHERE state='deleted');")

;; NEW BEHAVIOR: Look only at single run with run-id
;; 
;; (define (db:get-running-stats dbstruct run-id)
(define (db:get-count-tests-running-for-run-id dbstruct run-id) ;; fastmode)
  (let* ((qry ;; (if fastmode
		 ;;  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? LIMIT 1;"
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=?;")) ;; )
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (dbdat db)
       (let* ((stmth (db:get-cache-stmth dbdat run-id db qry)))
	 (sqlite3:first-result stmth run-id))))))

;; For a given testname how many items are running? Used to determine
;; probability for regenerating html
;;
(define (db:get-count-tests-running-for-testname dbstruct run-id testname)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (let* ((stmt "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? AND NOT (uname = 'n/a' AND item_path = '') AND testname=?;")
	    (stmth (db:get-cache-stmth dbdat run-id db stmt)))
       (sqlite3:first-result
	stmth run-id testname)))))

(define (db:get-not-completed-cnt dbstruct run-id)
(db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
      ;(print "SELECT count(id) FROM tests WHERE state not in ('COMPLETED', 'DELETED') AND run_id=" run-id)  
     (sqlite3:first-result
      db
      "SELECT count(id) FROM tests WHERE state not in ('COMPLETED', 'DELETED') AND run_id=?;" run-id))))

(define (db:get-count-tests-running-in-jobgroup dbstruct run-id jobgroup)
  (if (not jobgroup)
      0 ;; 
      (let ((testnames '()))
	;; get the testnames
	(db:with-db
	 dbstruct #f #f
	 (lambda (dbdat db)
	   (sqlite3:for-each-row
	    (lambda (testname)
	      (set! testnames (cons testname testnames)))
	    db
	    "SELECT testname FROM test_meta WHERE jobgroup=?"
	    jobgroup)))
	;; get the jobcount NB// EXTEND THIS TO OPPERATE OVER ALL RUNS?
	(if (not (null? testnames))
	    (db:with-db
	     dbstruct
	     run-id
	     #f

(define (db:estimated-tests-remaining dbstruct run-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (sqlite3:first-result
      db
      "SELECT count(id) FROM tests WHERE state in ('LAUNCHED','NOT_STARTED','REMOTEHOSTSTART','RUNNING','KILLREQ') AND run_id=?;")
     run-id)))

;; map run-id, testname item-path to test-id
(define (db:get-test-id dbstruct run-id testname item-path)
  (db:with-db
   dbstruct
   run-id
   #f

;;
(define (db:test-set-top-process-pid dbstruct run-id test-id pid)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE tests SET attemptnum=? WHERE id=?;"
		      pid test-id))))

(define (db:test-get-top-process-pid dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (db:first-result-default 
      db
      "SELECT attemptnum FROM tests WHERE id=?;"
      #f
      test-id))))

(define db:test-record-fields '("id"           "run_id"        "testname"  "state"      "status"      "event_time"
				"host"         "cpuload"       "diskfree"  "uname"      "rundir"      "item_path"
                                "run_duration" "final_logf"    "comment"   "shortdir"   "attemptnum"  "archived" "last_update"))

(define db:test-record-qry-selector (string-intersperse db:test-record-fields ","))

(define (db:update-tesdata-on-repilcate-db dbstruct old-lt new-lt)
  (db:with-db
   dbstruct   #f   #f
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE tests SET rundir= replace(rundir,?,?), shortdir=replace(shortdir,?,?);"
		      old-lt new-lt  old-lt new-lt))))

;; NOTE: Use db:test-get* to access records
;; NOTE: This needs rundir decoding? Decide, decode here or where used? For the moment decode where used.
(define (db:get-all-tests-info-by-run-id dbstruct run-id)
  (let* ((res '()))
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment shortdir attemptnum archived)
	  ;;                 0    1       2      3      4        5       6      7        8     9     10      11          12          13       14     15        16
	  (set! res (cons (vector id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment shortdir attemptnum archived)
			  res)))
	db
	(conc "SELECT " db:test-record-qry-selector " FROM tests WHERE state != 'DELETED' AND run_id=?;")
	run-id)))
    res))

(define (db:replace-test-records dbstruct run-id testrecs)
  (db:with-db dbstruct run-id #t 
	      (lambda (dbdat db)
		(let* ((qmarks (string-intersperse (make-list (length db:test-record-fields) "?") ","))
		       (qrystr (conc "INSERT OR REPLACE INTO tests (" db:test-record-qry-selector ") VALUES (" qmarks ") WHERE run_id=?;"))
		       (qry    (sqlite3:prepare db qrystr)))
		  (debug:print 0 *default-log-port* "INFO: migrating test records for run with id " run-id)
		  (sqlite3:with-transaction
		   db
		   (lambda ()
		     (for-each 
		      (lambda (rec)
			;; (debug:print 0 *default-log-port* "INFO: Inserting values: " (string-intersperse (map conc (vector->list rec)) ",") "\n")
			(apply sqlite3:execute qry (append (vector->list rec)(list run-id))))
		      testrecs)))
		  (sqlite3:finalize! qry)))))


;; map a test-id into the proper range
;;
(define (db:adj-test-id mtdb min-test-id test-id)
  (if (>= test-id min-test-id)
      test-id
      (let loop ((new-id min-test-id))

   #f
   (lambda (dbdat db)
     (let ((res #f))
       (sqlite3:for-each-row ;; attemptnum added to hold pid of top process (not Megatest) controlling a test
	(lambda (id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived last-update)
	  ;;                0    1       2      3      4        5       6      7        8     9     10      11          12          13           14         15          16
	  (set! res (vector id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived last-update)))
	db
	(conc "SELECT " db:test-record-qry-selector " FROM tests WHERE id=?;")
	test-id)
       res))))

;; Use db:test-get* to access
;; Get test data using test_ids. NB// Only works within a single run!!
;;
(define (db:get-test-info-by-ids dbstruct run-id test-ids)

(define (db:get-test-info dbstruct run-id test-name item-path)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (db:get-test-info-db db run-id test-name item-path))))

(define (db:get-test-info-db db run-id test-name item-path)
  (let ((res #f))
    (sqlite3:for-each-row
     (lambda (a . b)
       (set! res (apply vector a b)))
     db
     (conc "SELECT " db:test-record-qry-selector " FROM tests WHERE testname=? AND item_path=? AND run_id=?;")
     test-name item-path run-id)
    res))

(define (db:test-get-rundir-from-test-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id

    dbstruct
    #f ;; this is for the main runs db
    #f ;; does not modify db
    (lambda (dbdat db)
            (sqlite3:for-each-row
	(lambda (test-name item-path test-time target )
	  (set! res (cons (vector test-name item-path test-time) res)))
	db
        qry 
	run-name target)
       res))))

;;======================================================================
;; S T E P S
;;======================================================================

(define (db:teststep-set-status! dbstruct run-id test-id teststep-name state-in status-in comment logfile)
  (db:with-db
   dbstruct
   run-id
   #t
   (lambda (dbdat db)
     (sqlite3:execute 
      db
      "INSERT OR REPLACE into test_steps (test_id,stepname,state,status,event_time,comment,logfile) VALUES(?,?,?,?,?,?,?);"
      test-id teststep-name state-in status-in (current-seconds)
      (if comment comment "")
      (if logfile logfile "")))))



(define (db:delete-steps-for-test! dbstruct run-id test-id)
  ;; TODO: figure out why status is the key field rather than state (note:  CONSTRAINT test_steps_constraint UNIQUE (test_id,stepname,state) )
  (db:with-db
   dbstruct
   run-id
   #t
   (lambda (dbdat db)
     (sqlite3:execute 
      db
      "UPDATE test_steps set status='DELETED' where test_id=?" ;;  and run_id=? !! - run_id not in table (bummer) TODO: get run_id into schema for test_steps
      test-id))))


;; db-get-test-steps-for-run
(define (db:get-steps-for-test dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (let* ((res '()))
       (sqlite3:for-each-row 
	(lambda (id test-id stepname state status event-time logfile comment)
	  (set! res (cons (vector id test-id stepname state status event-time (if (string? logfile) logfile "") comment) res)))
	db
	"SELECT id,test_id,stepname,state,status,event_time,logfile,comment FROM test_steps WHERE status != 'DELETED' AND test_id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
	test-id)
       (reverse res)))))

 (define (db:get-steps-info-by-id dbstruct run-id test-step-id)
   (db:with-db
    dbstruct
    run-id
    #f
    (lambda (dbdat db)
      (let* ((res (vector #f #f #f #f #f #f #f #f #f)))
        (sqlite3:for-each-row 
       (lambda (id test-id stepname state status event-time logfile comment last-update)
         (set! res (vector id test-id stepname state status event-time (if (string? logfile) logfile "") comment last-update)))
       db
       "SELECT id,test_id,stepname,state,status,event_time,logfile,comment,last_update FROM test_steps WHERE id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
       test-step-id)
        res))))

(define (db:get-steps-data dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (let ((res '()))
       (sqlite3:for-each-row 
	(lambda (id test-id stepname state status event-time logfile)
	  (set! res (cons (vector id test-id stepname state status event-time (if (string? logfile) logfile "")) res)))
	db
	"SELECT id,test_id,stepname,state,status,event_time,logfile FROM test_steps WHERE status != 'DELETED' AND test_id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
	test-id)
       (reverse res)))))

;;======================================================================
;; T E S T  D A T A 
;;======================================================================

(define (db:get-data-info-by-id dbstruct run-id test-data-id)
  (let* ((stmt        "SELECT id,test_id, category, variable, value, expected, tol, units, comment, status, type, last_update FROM test_data WHERE id=? ORDER BY id ASC;")) ;; event_time DESC,id ASC;
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (dbdat db)
       (let* ((stmth (db:get-cache-stmth dbdat #f db stmt))
	      (res   (sqlite3:fold-row
		      (lambda (res id test-id  category variable value expected tol units comment status type last-update)
			(vector id test-id  category variable value expected tol units comment status type last-update))
		      (vector #f #f #f #f #f #f #f #f #f #f #f #f)
		      stmth
		      test-data-id)))
        res)))))

    (db:with-db
     dbstruct run-id #f
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (fcount pcount)
	  (set! fail-count fcount)
	  (set! pass-count pcount))
	db 
	"SELECT (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'fail') AS fail_count,
             (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'pass') AS pass_count;"
	test-id test-id)
       ;; Now rollup the counts to the central megatest.db
       (db:general-call dbstruct run-id 'pass-fail-counts (list pass-count fail-count test-id))
       ;; if the test is not FAIL then set status based on the fail and pass counts.
       (db:general-call dbstruct run-id 'test_data-pf-rollup (list test-id test-id test-id test-id))))))

;; each section is a rule except "final" which is the final result

  (let* ((res '()))
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (id test_id category variable value expected tol units comment status type)
	  (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	db
	"SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
       (reverse res)))))

;; This routine moved from tdb.scm, :read-test-data
;;
(define (db:read-test-data-varpatt dbstruct run-id test-id categorypatt varpatt)
  (let* ((res '()))
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (id test_id category variable value expected tol units comment status type)
	  (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	db
	"SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? AND variable LIKE ? ORDER BY category,variable;" test-id categorypatt varpatt)
       (reverse res)))))


;;======================================================================
;; Misc. test related queries
;;======================================================================

   run-id
   #f
   (lambda (dbdat db)
     (let ((res 0))
       (sqlite3:for-each-row
	(lambda (num-items)
	  (set! res num-items))
	db
	"SELECT count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND state NOT IN ('DELETED');"
	run-id
	testname)
       res))))

;;======================================================================
;; QUEUE UP META, TEST STATUS AND STEPS REMOTE ACCESS
;;======================================================================

     dbstruct run-id #f
     (lambda (dbdat db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                 ;; NB// Pass the db so it is part fo the transaction
                 (db:test-set-state-status-db db run-id test-id state status comment) ;; this call sets the item state/status
                 (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
                     (let* ((state-status-counts (db:get-all-state-status-counts-for-test db run-id test-name item-path state status)) ;; item-path is used to exclude current state/status of THIS test
			    (state-statuses      (db:roll-up-rules state-status-counts state status))
                            (newstate            (car state-statuses))
                            (newstatus           (cadr state-statuses)))
		       (set! new-state-eh newstate)
		       (set! new-status-eh newstatus)
                       (debug:print 4 *default-log-port* "BB> tl-test-id="tl-test-id" ; "test-name":"item-path" newstate="newstate" newstatus="newstatus" len(sscs)="(length state-status-counts)  " state-status-counts: "
				    (apply conc
					   (map (lambda (x)
						  (conc
                     				   (with-output-to-string (lambda () (pp (dbr:counts->alist x)))) " | "))
						state-status-counts))); end debug:print
		       (if tl-test-id
			   (db:test-set-state-status-db db run-id tl-test-id newstate newstatus #f)) ;; we are still in the transaction - must access the db and not the dbstruct
		       ))))))
         (mutex-unlock! *db-transaction-mutex*)
         (if (and test-id state status (equal? status "AUTO")) 
             (db:test-data-rollup dbstruct run-id test-id status))
	 (if new-state-eh ;; moved from db:test-set-state-status
	      (mt:process-triggers dbstruct run-id test-id new-state-eh new-status-eh))
         tr-res)))))

               db
               (lambda ()
                   (let* ((state-status-counts (db:get-all-state-status-counts-for-run-db db run-id))
			  (state-statuses      (db:roll-up-rules state-status-counts #f #f ))
                          (newstate            (car state-statuses))
                          (newstatus           (cadr state-statuses))) 
		     (if (or (not (eq? newstate curr-state)) (not (eq?  newstatus curr-status)))
			 (db:set-run-state-status-db db run-id newstate newstatus )))))))
         (mutex-unlock! *db-transaction-mutex*)
         tr-res))))

(define (db:get-all-state-status-counts-for-run-db db run-id)
  (sqlite3:map-row
   (lambda (state status count)
     (make-dbr:counts state: state status: status count: count))
   db
   "SELECT state,status,count(id) FROM tests WHERE run_id=?  GROUP BY state,status;"
   run-id ))

(define (db:get-all-state-status-counts-for-run dbstruct run-id)
  (db:with-db
   dbstruct #f #f
   (lambda (dbdat db)
     (db:get-all-state-status-counts-for-run-db dbstruct run-id))))

;; BBnote: db:get-all-state-status-counts-for-test returns dbr:counts object aggregating state and status of items of a given test, *not including rollup state/status*
;;
;; NOTE: This is called within a transaction
;;
(define (db:get-all-state-status-counts-for-test db run-id test-name item-path item-state-in item-status-in)
  (let* ((test-info   (db:get-test-info-db db run-id test-name item-path))
         (item-state  (or item-state-in (db:test-get-state test-info))) 
         (item-status (or item-status-in (db:test-get-status test-info)))
         (other-items-count-recs (sqlite3:map-row
                                  (lambda (state status count)
                                    (make-dbr:counts state: state status: status count: count))
                                  db
                                  ;; ignore current item because we have changed its value in the current transation so this select will see the old value.
                                  "SELECT state,status,count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND item_path !=? GROUP BY state,status;"
                                  run-id test-name item-path))
         ;; add current item to tally outside of sql query
	 (match-countrec-lambda (lambda (countrec) 
				  (and (equal? (dbr:counts-state  countrec) item-state)
                                       (equal? (dbr:counts-status countrec) item-status))))
	 
         (already-have-count-rec-list

	  ;; (let ((path       (sdb:qry 'getstr path-id))
	  ;;       (final_logf (sdb:qry 'getstr final_logf-id)))
	  (set! logf final_logf)
	  (set! res (list path final_logf))
	  (if (directory? path)
	      (debug:print 2 *default-log-port* "Found path: " path)
	      (debug:print 2 *default-log-port* "No such path: " path))) ;; )
	db
	"SELECT rundir,final_logf FROM tests WHERE testname=? AND item_path='' AND run_id=?;"
	test-name run-id)
       res))))

;;======================================================================
;; A G R E G A T E D   T R A N S A C T I O N   D B   W R I T E S 
;;======================================================================

				       (string->symbol stmtname)
				       stmtname)
				   db:queries)))
 		 (if q (car q) #f))))
    (db:with-db
     dbstruct run-id #f
     (lambda (dbdat db)
       (apply sqlite3:execute db query params)
       #t))))

;; get a summary of state and status counts to calculate a rollup
;;
(define (db:get-state-status-summary dbstruct run-id testname)
  (let ((res   '()))
    (db:with-db
     dbstruct run-id #f
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (state status count)
	  (set! res (cons (vector state status count) res)))
	db
	"SELECT state,status,count(state) FROM tests WHERE run_id=? AND testname=? AND item_path='' GROUP BY state,status;"
	run-id testname)
       res))))

(define (db:get-latest-host-load dbstruct raw-hostname)
  (let* ((hostname (string-substitute "\\..*$" "" raw-hostname))
         (res  (cons -1 0)))
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (sqlite3:for-each-row
        (lambda (cpuload update-time)  (set! res (cons cpuload update-time)))
        db
        "SELECT tr.cpuload, tr.update_time FROM test_rundat tr, tests t WHERE t.host=? AND tr.cpuload != -1  AND tr.test_id=t.id ORDER BY tr.update_time DESC LIMIT 1;"
        hostname))) res ))

(define (db:set-top-level-from-items dbstruct run-id testname)
  (let* ((summ  (db:get-state-status-summary dbstruct run-id testname))
	 (find  (lambda (state status)
		  (if (null? summ) 
		      #f

    ;; first look up the key values from the run selected by run-id
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (a . b)
	  (set! keyvals (cons a b)))
	db
	(conc "SELECT " selstr " FROM runs WHERE id=? ORDER BY event_time DESC;") run-id)))
    (if (not keyvals)
	'()
	(let ((prev-run-ids '()))
	  (db:with-db
	   dbstruct #f #f
	   (lambda (dbdat db)
	     (apply sqlite3:for-each-row
		    (lambda (id)
		      (set! prev-run-ids (cons id prev-run-ids)))
		    db
		    (conc "SELECT id FROM runs WHERE " qrystr " AND id != ?;") (append keyvals (list run-id)))))
	  ;; collect all matching tests for the runs then
	  ;; extract the most recent test and return that.
	  (debug:print 4 *default-log-port* "selstr: " selstr ", qrystr: " qrystr ", keyvals: " keyvals 
		       ", previous run ids found: " prev-run-ids)
	  (if (null? prev-run-ids) '()  ;; no previous runs? return null
	      (let loop ((hed (car prev-run-ids))
			 (tal (cdr prev-run-ids)))

     dbstruct
     run-id
     #f
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (id itempath state status run_duration logf comment)
	  (set! res (cons (vector id itempath state status run_duration logf comment) res)))
	db
	"SELECT id,item_path,state,status,run_duration,final_logf,comment FROM tests WHERE testname=? AND item_path != '' AND run_id=?;" ;; BUG! WHY NO run_id?
	test-name
	run-id)
       res))))

;;======================================================================
;; Tests meta data
;;======================================================================

	  (let ((tags (string-split tags-in ",")))
	    (for-each
	     (lambda (tag)
	       (hash-table-set! res tag
				(delete-duplicates
				 (cons testname (hash-table-ref/default res tag '())))))
	     tags)))
	db
	"SELECT testname,tags FROM test_meta")
       (hash-table->alist res)))))

;; read the record given a testname
(define (db:testmeta-get-record dbstruct testname)
  (let ((res   #f))
    (db:with-db
     dbstruct
     #f
     #f
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (id testname author owner description reviewed iterated avg_runtime avg_disk tags jobgroup)
	  (set! res (vector id testname author owner description reviewed iterated avg_runtime avg_disk tags jobgroup)))
	db
	"SELECT id,testname,author,owner,description,reviewed,iterated,avg_runtime,avg_disk,tags,jobgroup FROM test_meta WHERE testname=?;"
	testname)
       res))))

;; create a new record for a given testname
(define (db:testmeta-add-record dbstruct testname)
  (db:with-db dbstruct #f #f 
	      (lambda (dbdat db)
		(sqlite3:execute 
		 db
		 "INSERT OR IGNORE INTO test_meta (testname,author,owner,description,reviewed,iterated,avg_runtime,avg_disk,tags) VALUES (?,'','','','','','','','');" testname))))

;; update one of the testmeta fields
(define (db:testmeta-update-field dbstruct testname field value)
  (db:with-db dbstruct #f #f 
	      (lambda (dbdat db)
		(sqlite3:execute 
		 db
		 (conc "UPDATE test_meta SET " field "=? WHERE testname=?;") value testname))))

(define (db:testmeta-get-all dbstruct)
  (db:with-db dbstruct #f #f 
	      (lambda (dbdat db)
		(let ((res '()))
		  (sqlite3:for-each-row
		   (lambda (a . b)
		     (set! res (cons (apply vector a b) res)))
		   db
		   "SELECT id,testname,author,owner,description,reviewed,iterated,avg_runtime,avg_disk,tags,jobgroup FROM test_meta;")
		  res))))

;;======================================================================
;; M I S C   M A N A G E M E N T   I T E M S 
;;======================================================================

;; A routine to map itempaths using a itemmap

;; NOTE: Need one dbr:subdb per main.db, 1.db ...
;;
(defstruct dbr:subdb
  (dbname      #f) ;; .megatest/1.db
  (mtdbfile    #f) ;; mtrah/.megatest/1.db
  (mtdbdat     #f) ;; only need one of these for syncing
  ;; (dbdats      (make-hash-table))  ;; id => dbdat 
  (tmpdbfile   #f) ;; /tmp/.../.megatest/1.db
  ;; (refndbfile  #f) ;; /tmp/.../.megatest/1.db_ref
  (dbstack     (make-stack)) ;; stack for tmp dbr:dbdat,
  (homehost    #f) ;; not used yet
  (on-homehost #f) ;; not used yet
  (read-only   #f)
  (last-sync   0)
  (last-write  (current-seconds))
  )                ;; goal is to converge on one struct for an area but for now it is too confusing

;; need to keep dbhandles and cached statements together


(defstruct dbr:dbdat
  (dbfile      #f)
  (dbh         #f)    
  (stmt-cache  (make-hash-table))
  (read-only   #f)
  (birth-sec   (current-seconds)))

  (print-call-chain (current-error-port))
  (apply dbfile:print-err message)
  (dbfile:print-err
    ", error: "     ((condition-property-accessor 'exn 'message)   exn)
    ", arguments: " ((condition-property-accessor 'exn 'arguments) exn)
    ", location: "  ((condition-property-accessor 'exn 'location)  exn)
    ))














(define (dbfile:run-id->key run-id)
  (or run-id 'main))

(define (db:safely-close-sqlite3-db db stmt-cache #!key (try-num 3))
  (if (<= try-num 0)
      #f
      (handle-exceptions
	  exn
	(begin
	  (print "Attempt to safely close sqlite3 db failed. Trying again. exn=" exn)
	  (thread-sleep! 3)
	  (sqlite3:interrupt! db)
	  (db:safely-close-sqlite3-db db stmt-cache try-num: (- try-num 1)))
	(if (sqlite3:database? db)
	    (let* ((stmts (and stmt-cache (hash-table-ref/default stmt-cache db #f))))


	      (if stmts (map sqlite3:finalize! (hash-table-values stmts)))
	      (sqlite3:finalize! db)
	      #t)
            (begin
             (dbfile:print-err "db:safely-close-sqlite3-db: " db " is not an sqlite3 db")
	     #f
            )
        ))))

;; close all opened run-id dbs
(define (db:close-all dbstruct)
  (if (dbr:dbstruct? dbstruct)
;; (handle-exceptions
;; 	  exn
;; 	  (begin
;; 	    (debug:print 0 *default-log-port* "WARNING: Finalizing failed, "  ((condition-property-accessor 'exn 'message) exn) ", note - exn=" exn)
;; 	    (print-call-chain *default-log-port*))
	;; (db:sync-touched dbstruct 0 force-sync: #t) ;; NO. Do not do this here. Instead we rely on a server to be started when there are writes, even if the server itself is not going to be used as a server.
        (let* ((subdbs     (hash-table-values (dbr:dbstruct-subdbs dbstruct))))
	  (for-each
	   (lambda (subdb)
	     (let* ((tdbs       (stack->list (dbr:subdb-dbstack subdb)))
		    (mtdbdat    (dbr:dbdat-dbh (dbr:subdb-mtdbdat subdb)))
		    #;(rdb        (dbr:dbdat-dbh (dbr:subdb-refndb subdb))))
		    
	       (map (lambda (dbdat)
		      (let* ((stmt-cache (dbr:dbdat-stmt-cache dbdat))
			     (dbh        (dbr:dbdat-dbh        dbdat)))
			(db:safely-close-sqlite3-db dbh stmt-cache)))
		    tdbs)
	       (db:safely-close-sqlite3-db mtdbdat (dbr:dbdat-stmt-cache  (dbr:subdb-mtdbdat subdb))) 
               ;; (if (sqlite3:database? mdb) (sqlite3:finalize! mdb))
	       #;(db:safely-close-sqlite3-db rdb #f))) ;; stmt-cache))))) ;; (if (sqlite3:database? rdb) (sqlite3:finalize! rdb))))))
	   subdbs)
           #t
          )
          #f
  )
)

;; ;; set up a single db (e.g. main.db, 1.db ... etc.)
;; ;;
;; (define (db:setup-db dbstruct areapath run-id)
;;   (let* ((dbname   (db:run-id->dbname run-id))
;; 	 (dbstruct (hash-table-ref/default dbstructs dbname #f)))
;;     (if dbstruct

  (let* ((backupfname (conc fname"-"(current-process-id)".bak"))
	 (cmd (conc "cp "fname" "backupfname";mv "fname" "(conc fname ".delme;")
		    "cp "backupfname" "fname)))
    (dbfile:print-err "WARNING: attempting recovery of file "fname" by running commands:\n"
		      "  "cmd)
    (system cmd)))


(define (dbfile:open-no-sync-db dbpath)
  (if *no-sync-db*
      *no-sync-db*
      (begin
	(if (not (file-exists? dbpath))
	    (create-directory dbpath #t))
	(let* ((dbname    (conc dbpath "/no-sync.db"))
	       (db-exists (file-exists? dbname))
	       (init-proc (lambda (db)
			    (if (not db-exists)
				(begin
				  (sqlite3:execute db "CREATE TABLE IF NOT EXISTS no_sync_metadat (var TEXT,val TEXT, CONSTRAINT no_sync_metadat_constraint UNIQUE (var));"))
				)))
	       (db        (dbfile:cautious-open-database dbname init-proc 0 "WAL"))) ;; (sqlite3:open-database dbname)))
	  ;; (sqlite3:execute db "PRAGMA synchronous = 0;")
	  ;; (sqlite3:set-busy-handler! db (sqlite3:make-busy-timeout 136000)) ;; done in cautious-open-database



	  (set! *no-sync-db* db)
	  db))))





(define (db:no-sync-set db var val)
  (sqlite3:execute db "INSERT OR REPLACE INTO no_sync_metadat (var,val) VALUES (?,?);" var val))

(define (db:no-sync-del! db var)
  (sqlite3:execute db "DELETE FROM no_sync_metadat WHERE var=?;" var))

(define (db:no-sync-get/default db var default)
  (let ((res default))
    (sqlite3:for-each-row
     (lambda (val)
       (set! res val))
     db
     "SELECT val FROM no_sync_metadat WHERE var=?;"
     var)
    (if res
        (let ((newres (if (string? res)
			  (string->number res)
			  #f)))
          (if newres
              newres
              res))

;; (db:with-db dbstruct run-id sqlite3:exec "select blah fgrom blaz;")
;; r/w is a flag to indicate if the db is modified by this query #t = yes, #f = no
;;
(define (db:with-db dbstruct run-id r/w proc . params)
  (assert dbstruct "FATAL: db:with-db called with dbstruct "#f)
  (assert (dbr:dbstruct? dbstruct) "FATAL: dbstruct is "dbstruct)
  (let* ((use-mutex (> *api-process-request-count* 25)) ;; risk of db corruption

	 (have-struct (dbr:dbstruct? dbstruct))
         (dbdat     (if have-struct                ;; this stuff just allows us to call with a db handle directly
			(db:open-db dbstruct run-id (dbfile:db-init-proc)) ;; (dbfile:get-subdb dbstruct run-id)
			#f))
	 (db        (if have-struct                ;; this stuff just allows us to call with a db handle directly
			(dbr:dbdat-dbh dbdat)
			dbstruct))

	 ) ;; was 25
    (assert (sqlite3:database? db) "FATAL: db:with-db, db is not a database, db="db", fname="fname)
    (if (file-exists? jfile)
	(begin
	  (dbfile:print-err "INFO: "jfile" exists, delaying to reduce database load")
	  (thread-sleep! 0.2)))
    (if (and use-mutex
	     (common:low-noise-print 120 "over-50-parallel-api-requests"))
	(dbfile:print-err *api-process-request-count* " parallel api requests being processed in process "
			  (current-process-id))) ;;  ", throttling access"))

    (condition-case
	(begin



	  (if use-mutex (mutex-lock! *db-with-db-mutex*))
	  (let ((res (apply proc dbdat db params))) ;; the actual call is here.
	    (if use-mutex (mutex-unlock! *db-with-db-mutex*))
	    ;; (if (vector? dbstruct)(db:done-with dbstruct run-id r/w))
	    (if dbdat
		(dbfile:add-dbdat dbstruct run-id dbdat))
	    res))
      (exn (io-error)

(define (http-transport:inc-requests-and-prep-to-close-all-connections)
  (mutex-lock! *http-mutex*)
  (set! *http-requests-in-progress* (+ 1 *http-requests-in-progress*)))

;; Send "cmd" with json payload "params" to serverdat and receive result
;;
(define (http-transport:client-api-send-receive run-id serverdat cmd params #!key (numretries 3)(area-dat #f))
  (let* ((fullurl    (if (vector? serverdat)
			 (http-transport:server-dat-get-api-req serverdat)
			 (begin
			   (debug:print 0 *default-log-port* "FATAL ERROR: http-transport:client-api-send-receive called with no server info")
			   (exit 1))))

	 (res        (vector #f "uninitialized"))
	 (success    #t)
	 (sparams    (db:obj->string params transport: 'http))
	 (runremote  (or area-dat *runremote*))
         (server-id   (if (vector? serverdat) 
                           (http-transport:server-dat-get-server-id serverdat)
                           (begin
			     (debug:print 0 *default-log-port* "FATAL ERROR: http-transport:client-api-send-receive called with no server info")
			     (exit 1)))))
       (debug:print-info 11 *default-log-port* "cmd=" cmd " fullurl=" fullurl " server-id=" server-id " current time:" (current-seconds)) 

       ;; set up the http-client here
       (max-retry-attempts 1)
       ;; consider all requests indempotent
       (retry-request? (lambda (request)
			 #f))

                                                    (debug:print-info 0 *default-log-port* "couldn't talk to server, trying again ...")
                                                    (begin
                                                      (debug:print 0 *default-log-port* "WARNING: failure in with-input-from-request to " fullurl ".")
                                                      (debug:print 0 *default-log-port* " message: " msg ", exn=" exn)
                                                      (debug:print 0 *default-log-port* " cmd: " cmd " params: " params " key:" (or server-id "thekey"))
                                                      (debug:print 0 *default-log-port* " call-chain: " call-chain)))
						;; what if another thread is communicating ok? Can't happen due to mutex
						(set! *runremote* #f)
						(set! runremote #f)
						;; (if runremote
						;;    (remote-conndat-set! runremote #f))
						;; Killing associated server to allow clean retry.")
						;; (tasks:kill-server-run-id run-id)  ;; better to kill the server in the logic that called this routine?
						(mutex-unlock! *http-mutex*)
						;; (signal (make-composite-condition
						;;          (make-property-condition 'commfail 'message "failed to connect to server")))
						;; "communications failed"
						;; (close-all-connections!)
						(close-connection! fullurl)
						(db:obj->string #f))
					      (with-input-from-request ;; was dat
					       fullurl 
					       (list (cons 'key (or server-id   "thekey"))
						     (cons 'cmd cmd)
						     (cons 'params sparams))
					       read-string))

		      (make-property-condition 
		       'timeout
		       'message "nmsg-transport:client-api-send-receive-raw timed out talking to server")))))))

;; careful closing of connections stored in *runremote*
;;
(define (http-transport:close-connections runremote)
  (let* (;; (runremote  (or area-dat *runremote*))
	 (server-dat (if runremote
                         (remote-conndat runremote)
                         #f))) ;; (hash-table-ref/default *runremote* run-id #f)))
    (if (vector? server-dat)
	(let ((api-dat (http-transport:server-dat-get-api-uri server-dat)))
	  (handle-exceptions
	    exn
	    (begin
	      (print-call-chain *default-log-port*)
	      (debug:print-error 0 *default-log-port* " closing connection failed with error: " ((condition-property-accessor 'exn 'message) exn) ", exn=" exn))
	    (if (args:any-defined? "-server" "-execute" "-run")


		(debug:print-info 0 *default-log-port* "Closing connections to "api-dat))
	    (close-connection! api-dat)
	    ;; (close-connection! (http-transport:server-dat-make-url server-dat))
	    (remote-conndat-set! runremote #f)
	    #t))
	#f)))


(define (make-http-transport:server-dat)(make-vector 6))
(define (http-transport:server-dat-get-iface         vec)    (vector-ref  vec 0))
(define (http-transport:server-dat-get-port          vec)    (vector-ref  vec 1))
(define (http-transport:server-dat-get-api-uri       vec)    (vector-ref  vec 2))
(define (http-transport:server-dat-get-api-url       vec)    (vector-ref  vec 3))
(define (http-transport:server-dat-get-api-req       vec)    (vector-ref  vec 4))
(define (http-transport:server-dat-get-last-access   vec)    (vector-ref  vec 5))
;(define (http-transport:server-dat-get-socket        vec)    (vector-ref  vec 6))
(define (http-transport:server-dat-get-server-id     vec)    (vector-ref  vec 6))

(define (http-transport:server-dat-make-url vec)
  (if (and (http-transport:server-dat-get-iface vec)
	   (http-transport:server-dat-get-port  vec))
      (conc "http://" 
	    (http-transport:server-dat-get-iface vec)
	    ":"
	    (http-transport:server-dat-get-port  vec))
      #f))

(define (http-transport:server-dat-update-last-access vec)
  (if (vector? vec)
      (vector-set! vec 5 (current-seconds))
      (begin
	(print-call-chain (current-error-port))
	(debug:print-error 0 *default-log-port* "call to http-transport:server-dat-update-last-access with non-vector!!"))))

;;
;; connect
;;
(define (http-transport:client-connect iface port server-id)
  (debug:print-info 2 *default-log-port* "Connecting to server at "iface":"port", id "server-id)
  (let* ((api-url      (conc "http://" iface ":" port "/api"))
	 (api-uri      (uri-reference (conc "http://" iface ":" port "/api")))
	 (api-req      (make-request method: 'POST uri: api-uri))
	 (server-dat   (vector iface port api-uri api-url api-req (current-seconds) server-id)))
    server-dat))




;; run http-transport:keep-running in a parallel thread to monitor that the db is being 
;; used and to shutdown after sometime if it is not.
;;
(define (http-transport:keep-running) 
  ;; if none running or if > 20 seconds since 
  ;; server last used then start shutdown

(define (rmt:get-connection-info areapath runremote) ;; TODO: push areapath down.
  (let* ((cinfo     (if (remote? runremote)
			(remote-conndat runremote)
			#f)))
	  (if cinfo
	      cinfo
	      (if (server:check-if-running areapath)
		  (client:setup areapath)
		  #f))))

(define (rmt:on-homehost? runremote)
  (let* ((hh-dat (remote-hh-dat runremote)))
    (if (pair? hh-dat)
	(cdr hh-dat)
	(begin

     ;; also, the expire-time calculation might not be correct. We want, time-since-last-server-access > (server:get-timeout)
     ;;
     ;;DOT CASE4 [label="reset\nconnection"];
     ;;DOT MUTEXLOCK -> CASE4 [label="have connection,\nlast_access > expire_time"]; {rank=same "case 4" CASE4}
     ;;DOT CASE4 -> "rmt:send-receive";
     ;; reset the connection if it has been unused too long
     ((and runremote
           (remote-conndat runremote)
	   (> (current-seconds) ;; if it has been more than server-timeout seconds since last contact, close this connection and start a new on
	      (+ (http-transport:server-dat-get-last-access (remote-conndat runremote))
		 (remote-server-timeout runremote))))
      (debug:print-info 0 *default-log-port* "Connection to " (remote-server-url runremote) " expired due to no accesses, forcing new connection.")
      (http-transport:close-connections runremote)
      ;; moving this setting of runremote conndat to #f to inside the http-transport:close-connections
      ;; (remote-conndat-set! runremote #f) ;; invalidate the connection, thus forcing a new connection.
      (mutex-unlock! *rmt-mutex*)
      (rmt:send-receive cmd rid params attemptnum: attemptnum))

     ;;DOT CASE6 [label="init\nremote"];
     ;;DOT MUTEXLOCK -> CASE6 [label="on homehost,\nwrite query,\nhave server,\ncan't reach it"]; {rank=same "case 6" CASE6};
     ;;DOT CASE6 -> "rmt:send-receive";
     ;; on homehost and this is a write, we already have a server, but server has died

     ;; reinstate this keep-alive section but inject a time condition into the (add ...
     
     #;((and (cdr (remote-hh-dat runremote))           ;; on homehost
           (not (member cmd api:read-only-queries))  ;; this is a write
           (remote-server-url runremote)             ;; have a server
           (not (server:ping (remote-server-url runremote) (remote-server-id runremote))))  ;; server has died. NOTE: this is not a cheap call! Need better approach.
      (debug:print 0 *default-log-port* "WARNING: server appears to have died, trying to reconnect, case 6")
      (http-transport:close-connections area-dat: runremote) ;; make sure to clean up
      (set! *runremote* (make-remote))
      (let* ((server-info (remote-server-info *runremote*))) 
            (if server-info
		(begin
		  (remote-server-url-set! *runremote* (server:record->url server-info))
                  (remote-server-id-set! *runremote* (server:record->id server-info)))))
      (remote-force-server-set! runremote (common:force-server?))
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  6")
      (rmt:send-receive cmd rid params attemptnum: attemptnum))

     ;;DOT CASE7 [label="homehost\nwrite"];
     ;;DOT MUTEXLOCK -> CASE7 [label="server not required,\non homehost,\na write,\nhave a server"]; {rank=same "case 7" CASE7};
     ;;DOT CASE7 -> "rmt:open-qry-close-locally";
     ;; on homehost and this is a write, we already have a server
     ((and (not (remote-force-server runremote))     ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))           ;; on homehost

     ;;DOT MUTEXLOCK -> CASE11 [label="else"]; {rank=same "case 11" CASE11};
     ;;DOT CASE11 -> "rmt:send-receive" [label="call failed"];
     ;;DOT CASE11 -> "RESULT" [label="call succeeded"];
     ;; not on homehost, do server query
     (else (extras-case-11 *default-log-port* runremote cmd params attemptnum rid)))))
    ;;DOT }

;; No Title 
;; Error: (vector-ref) out of range
;; #(#<condition: (exn type)> (#("db.scm:3740: regex#regexp" #f #f) #("db.scm:3739: regex#string-substitute" #f #f) #("db.scm:3738: base64#base64-decode" #f #f) #("db.scm:3737: z3#z3:decode-buffer" #f #f) #("db.scm:3736: with-input-from-string" #f #f) #("db.scm:3741: s11n#deserialize" #f #f) #("api.scm:374: api:execute-requests" #f #f) #("api.scm:139: call-with-current-continuation" #f #f) #("api.scm:139: with-exception-handler" #f #f) #("api.scm:139: ##sys#call-with-values" #f #f) #("api.scm:158: string->symbol" #f #f) #("api.scm:160: current-milliseconds" #f #f) #("api.scm:161: dbr:dbstruct-read-only" #f #f) #("api.scm:139: k15" #f #f) #("api.scm:139: g19" #f #f) #("api.scm:142: get-call-chain" #f #f)) #("get-test-info-by-id" (1102 507299)))
;; 6
;; 
;; 	Call history:
;; 
;; 	http-transport.scm:306: thread-terminate!	  
;; 	http-transport.scm:307: debug:print-info	  
;; 	common_records.scm:235: debug:debug-mode	  
;; 	rmt.scm:259: k587	  
;; 	rmt.scm:259: g591	  
;; 	rmt.scm:276: http-transport:server-dat-update-last-access	  
;; 	http-transport.scm:364: current-seconds	  
;; 	rmt.scm:282: debug:print-info	  
;; 	common_records.scm:235: debug:debug-mode	  
;; 	rmt.scm:283: mutex-unlock!	  
;; 	rmt.scm:287: extras-transport-succeded	  	<--
;; +-----------------------------------------------------------------------------+
;; | Exit Status    : 70  
;;  

;; bunch of small functions factored out of send-receive to make debug easier
;;

(define (extras-case-11 *default-log-port* runremote cmd params attemptnum rid)
  ;; (mutex-unlock! *rmt-mutex*)
  (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9")
  ;; (mutex-lock! *rmt-mutex*)
  (let* ((conninfo (remote-conndat runremote))
	 (dat-in      (case (remote-transport runremote)
		     ((http) (condition-case ;; handling here has
					     ;; caused a lot of
					     ;; problems. However it
					     ;; is needed to deal with
					     ;; attemtped
					     ;; communication to
					     ;; servers that have gone
					     ;; away
			      (http-transport:client-api-send-receive 0 conninfo cmd params)
                              ((servermismatch)  (vector #f "Server id mismatch" ))
			      ((commfail)(vector #f "communications fail"))
			      ((exn)(vector #f "other fail" (print-call-chain)))))
		     (else
		      (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport runremote) " not supported")
		      (exit))))
	 (dat      (if (and (vector? dat-in) ;; ... check it is a correct size
			    (> (vector-length dat-in) 1))
		       dat-in
		       (vector #f (conc "communications fail (type 2), dat-in=" dat-in))))
	 (success  (if (vector? dat) (vector-ref dat 0) #f))
	 (res      (if (vector? dat) (vector-ref dat 1) #f)))
    (if (and (vector? conninfo) (< 5 (vector-length conninfo)))
	(http-transport:server-dat-update-last-access conninfo) ;; refresh access time
	(begin
	  (debug:print 0 *default-log-port* "INFO: Should not get here! conninfo=" conninfo)
	  (set! conninfo #f)
	  (http-transport:close-connections runremote)))
    (debug:print-info 13 *default-log-port* "rmt:send-receive, case  9. conninfo=" conninfo " dat=" dat " runremote = " runremote)
    (mutex-unlock! *rmt-mutex*)
    (if success ;; success only tells us that the transport was
	;; successful, have to examine the data to see if
	;; there was a detected issue at the other end
	(extras-transport-succeded *default-log-port* *rmt-mutex* attemptnum runremote res params rid cmd)
	(begin
           (debug:print-error 0 *default-log-port* " dat=" dat) 

	  (if qry-is-write
	      (let ((start-time (current-seconds)))
		(mutex-lock! *db-multi-sync-mutex*)
/		(set! *db-last-access* start-time)  ;; THIS IS PROBABLY USELESS? (we are on a client)
                (mutex-unlock! *db-multi-sync-mutex*)))))
    res))

(define (rmt:send-receive-no-auto-client-setup connection-info cmd run-id params)
  (let* ((run-id   (if run-id run-id 0))
	 (res  	   ;; (handle-exceptions
		   ;;     exn
		   ;;   (begin
		   ;;     (print "transport failed. exn=" exn)
		   ;;     #f)
		     (http-transport:client-api-send-receive run-id connection-info cmd params))) ;; )
    (if (and res (vector-ref res 0))
	(vector-ref res 1) ;;; YES!! THIS IS CORRECT!! CHANGE IT HERE, THEN CHANGE rmt:send-receive ALSO!!!
	#f)))

;;======================================================================
;;
;; A C T U A L   A P I   C A L L S  

(define (rmt:login run-id)
  (rmt:send-receive 'login run-id (list *toppath* megatest-version (client:get-signature))))

;; This login does no retries under the hood - it acts a bit like a ping.
;; Deprecated for nmsg-transport.
;;
(define (rmt:login-no-auto-client-setup connection-info)
  (case *transport-type* ;; run-id of 0 is just a placeholder
    ((http)(rmt:send-receive-no-auto-client-setup connection-info 'login 0 (list *toppath* megatest-version (client:get-signature))))
    ;;((nmsg)(nmsg-transport:client-api-send-receive run-id connection-info 'login (list *toppath* megatest-version run-id *my-client-signature*)))
    ))

;; hand off a call to one of the db:queries statements
;; added run-id to make looking up the correct db possible 
;;
(define (rmt:general-call stmtname run-id . params)
  (rmt:send-receive 'general-call run-id (append (list stmtname run-id) params)))

    (tasks:kill-server hostname pid))))

;; called in megatest.scm, host-port is string hostname:port
;;
;; NOTE: This is NOT called directly from clients as not all transports support a client running
;;       in the same process as the server.
;;
(define (server:ping host-port-in server-id #!key (do-exit #f))
  (let ((host:port (if (not host-port-in) ;; use read-dotserver to find
		       #f ;; (server:check-if-running *toppath*)
		;; (if (number? host-port-in) ;; we were handed a server-id
		;; 	   (let ((srec (tasks:get-server-by-id (db:delay-if-busy (tasks:open-db)) host-port-in)))
		;; 	     ;; (print "srec: " srec " host-port-in: " host-port-in)
		;; 	     (if srec
		;; 		 (conc (vector-ref srec 3) ":" (vector-ref srec 4))
		;; 		 (conc "no such server-id " host-port-in)))
		       host-port-in))) ;; )
    (let* ((host-port (if host:port

			  (let ((slst (string-split   host:port ":")))
			    (if (eq? (length slst) 2)
				(list (car slst)(string->number (cadr slst)))
				#f))

			  #f)))
;;	   (toppath       (launch:setup)))
      ;; (print "host-port=" host-port)

      (if (not host-port)
	  (begin
	    (if host-port-in
		(debug:print 0 *default-log-port*  "ERROR: bad host:port"))
	    (if do-exit (exit 1))
	    #f)

	  (let* ((iface      (car host-port))
		 (port       (cadr host-port))
		 (server-dat (http-transport:client-connect iface port server-id))
		 (login-res  (rmt:login-no-auto-client-setup server-dat)))
	    (if (and (list? login-res)
		     (car login-res))
		(begin
		  ;; (print "LOGIN_OK")
		  (if do-exit (exit 0))
		  #t)
		(begin
		  ;; (print "LOGIN_FAILED")
		  (if do-exit (exit 1))






		  #f)))))))

;; run ping in separate process, safest way in some cases
;;
(define (server:ping-server ifaceport)
  (with-input-from-pipe 
   (conc (common:get-megatest-exe) " -ping " ifaceport)
   (lambda ()