Megatest

utils/build/*
*~
*.o
bin/*
megatest.db
monitor.db
megatest
dboard
tests/fullrun/tmp/*
tests/simpleruns
tests/simplelinks
mkdeploy/runs
mkdeploy/links
example/linktree
example/runs
*.backup
mkdeploy/linktree
mkdeploy/site.config
mtest
newdboard
*.log
fslsync/fslsynclinks/*
fslsync/fslsyncruns/*
sites.dat
fullrun/config/*.config
fullrun/envfile.txt
*.bak
simplerun/*.scm
simplerun/simpleruns

# make install CSCOPTS='-accumulate-profile -profile-name $(PWD)/profile-ww$(shell date +%V.%u)'
PREFIX=$(PWD)
CSCOPTS= 
INSTALL=install
SRCFILES = common.scm items.scm launch.scm \
           ods.scm runconfig.scm server.scm configf.scm \
           db.scm keys.scm margs.scm megatest-version.scm \
           process.scm runs.scm tasks.scm tests.scm genexample.scm \

1. All run control access to db is direct.
2. All test machines must have megatest available
3. Tests may or may not have file system access to the originating
   run area. rsync is used to pull the test area to the home host
   if and only if the originating area can not be seen via file 
   system. NO LONGER TRUE. Rsync is used but file system must be visible.
4. All db access is done via the home host. NOT IMPLEMENTED YET.

REMOTE ACCESS DB LOADS

INFO: (0) Max cached queries was    10
INFO: (0) Number of cached writes   27043
INFO: (0) Average cached write time 15.0634544983915 ms
INFO: (0) Number non-cached queries 71928
INFO: (0) Average non-cached time   5.15547491936381 ms
INFO: (0) Server shutdown complete. Exiting


fdktestqa on Apr 29, 2013: 1812 tests

INFO: (0) Max cached queries was    10
INFO: (0) Number of cached writes   41335
INFO: (0) Average cached write time 206.081553163179 ms
INFO: (0) Number non-cached queries 74289

(define *logged-in-clients* (make-hash-table))
(define *client-non-blocking-mode* #f)
(define *server-id*         #f)
(define *server-info*       #f)
(define *time-to-exit*      #f)
(define *received-response* #f)
(define *default-numtries*  10)
(define *server-run*        #t)
(define *db-write-access*   #t)


(define *target*            (make-hash-table)) ;; cache the target here; target is keyval1/keyval2/.../keyvalN
(define *keys*              (make-hash-table)) ;; cache the keys here
(define *keyvals*           (make-hash-table))
(define *toptest-paths*     (make-hash-table)) ;; cache toptest path settings here
(define *test-paths*        (make-hash-table)) ;; cache test-id to test run paths here
(define *test-ids*          (make-hash-table)) ;; cache run-id, testname, and item-path => test-id
(define *test-info*         (make-hash-table)) ;; cache the test info records, update the state, status, run_duration etc. from testdat.db

;; Awful. Please FIXME
(define *env-vars-by-run-id* (make-hash-table))
(define *current-run-name*   #f)

(define (common:clear-caches)

  (set! *keys*               (make-hash-table))
  (set! *keyvals*            (make-hash-table))
  (set! *toptest-paths*      (make-hash-table))
  (set! *test-paths*         (make-hash-table))
  (set! *test-ids*           (make-hash-table))
  (set! *test-info*          (make-hash-table))
  (set! *env-vars-by-run-id* (make-hash-table))

(define toplevel #f)
(define dlg      #f)
(define max-test-num 0)
;; (define *keys*   (open-run-close db:get-keys #f))
(define *keys*   (cdb:remote-run db:get-keys #f))
;; (define *keys*   (db:get-keys   *db*))

(define *dbkeys*  (append *keys* (list "runname")))

(define *header*       #f)
(define *allruns*     '())
(define *allruns-by-id* (make-hash-table)) ;; 
(define *runchangerate* (make-hash-table))

(define *buttondat*    (make-hash-table)) ;; <run-id color text test run-key>
(define *alltestnamelst* '())

	    (debug:print 6 "update-rundat, got " (length runs) " runs")
	    (if (> (+ *last-update* 300) (current-seconds)) ;; every five minutes
		(begin
		  (set! *last-update* (current-seconds))
		  (set! *tot-run-count* (length runs))))
	    ;; 
	    ;; trim runs to only those that are changing often here

	    ;; 
	    (for-each (lambda (run)
			(let* ((run-id   (db:get-value-by-header run header "id"))
			       (tests    (let ((tsts (cdb:remote-run db:get-tests-for-run #f run-id testnamepatt states statuses)))
					   (if *tests-sort-reverse* (reverse tsts) tsts)))
			       (key-vals (cdb:remote-run db:get-key-vals #f run-id)))
			  ;; Not sure this is needed?

	  (set! *last-global-delta-printed* *global-delta*)))
    (debug:print-info 11 "open-run-close-measure END" )
    res))

(define (db:initialize db)
  (debug:print-info 11 "db:initialize START")
  (let* ((configdat (car *configinfo*))  ;; tut tut, global warning...
	 (keys     (keys:config-get-fields configdat))
	 (havekeys (> (length keys) 0))
	 (keystr   (keys->keystr keys))
	 (fieldstr (keys->key/field keys)))
    (for-each (lambda (key)
		(let ((keyn key))
		  (if (member (string-downcase keyn)
			      (list "runname" "state" "status" "owner" "event_time" "comment" "fail_count"
				    "pass_count"))
		      (begin
			(print "ERROR: your key cannot be named " keyn " as this conflicts with the same named field in the runs table")
			(system (conc "rm -f " dbpath))
			(exit 1)))))
	      keys)
    ;; (sqlite3:execute db "PRAGMA synchronous = OFF;")
    (db:set-sync db)
    (sqlite3:execute db "CREATE TABLE IF NOT EXISTS keys (id INTEGER PRIMARY KEY, fieldname TEXT, fieldtype TEXT, CONSTRAINT keyconstraint UNIQUE (fieldname));")
    (for-each (lambda (key)
		(sqlite3:execute db "INSERT INTO keys (fieldname,fieldtype) VALUES (?,?);" key "TEXT"))
	      keys)
    (sqlite3:execute db (conc 
			 "CREATE TABLE IF NOT EXISTS runs (id INTEGER PRIMARY KEY, " 
			 fieldstr (if havekeys "," "")
			 "runname TEXT,"
			 "state TEXT DEFAULT '',"
			 "status TEXT DEFAULT '',"

  (debug:print-info 11 "db:set-var END " var " " val))

(define (db:del-var db var)
  (debug:print-info 11 "db:del-var START " var)
  (sqlite3:execute db "DELETE FROM metadat WHERE var=?;" var)
  (debug:print-info 11 "db:del-var END " var))

;; use a global for some primitive caching, it is just silly to
;; re-read the db over and over again for the keys since they never
;; change

;; why get the keys from the db? why not get from the *configdat*
;; using keys:config-get-fields?

(define (db:get-keys db)
  (if *db-keys* *db-keys* 
      (let ((res '()))

	(sqlite3:for-each-row 
	 (lambda (key)
	   (set! res (cons key res)))
	 db
	 "SELECT fieldname FROM keys ORDER BY id DESC;")
	(set! *db-keys* res)

	res)))

(define (db:get-value-by-header row header field)
  (debug:print-info 4 "db:get-value-by-header row: " row " header: " header " field: " field)
  (if (null? header) #f
      (let loop ((hed (car header))
		 (tal (cdr header))

(define (db:get-run-key-val db run-id key)
  (let ((res #f))
    (sqlite3:for-each-row
     (lambda (val)
       (set! res val))
     db 
     (conc "SELECT " key " FROM runs WHERE id=?;")
     run-id)
    res))

;; keys list to key1,key2,key3 ...
(define (runs:get-std-run-fields keys remfields)
  (let* ((header    (append keys remfields))

	 (keystr    (conc (keys->keystr keys) ","
			  (string-intersperse remfields ","))))
    (list keystr header)))

;; make a query (fieldname like 'patt1' OR fieldname 
(define (db:patt->like fieldname pattstr #!key (comparator " OR "))
  (let ((patts (if (string? pattstr)
		   (string-split pattstr ",")
		   '("%"))))
    (string-intersperse (map (lambda (patt)
			       (let ((wildtype (if (substring-index "%" patt) "LIKE" "GLOB")))
				 (conc fieldname " " wildtype " '" patt "'")))
			     (if (null? patts)
				 '("")
				 patts))
			comparator)))


;; register a test run with the db
(define (db:register-run db keyvals runname state status user)
  (debug:print 3 "runs:register-run runname: " runname " state: " state " status: " status " user: " user)
  (let* ((keys      (map car keyvals))
	 (keystr    (keys->keystr keys))	 
	 (comma     (if (> (length keys) 0) "," ""))
	 (andstr    (if (> (length keys) 0) " AND " ""))
	 (valslots  (keys->valslots keys)) ;; ?,?,? ...

	 (allvals   (append (list runname state status user) (map cadr keyvals)))
	 (qryvals   (append (list runname) (map cadr keyvals)))
	 (key=?str  (string-intersperse (map (lambda (k)(conc k "=?")) keys) " AND ")))
    (debug:print 3 "keys: " keys " allvals: " allvals " keyvals: " keyvals " key=?str is " key=?str)
    (debug:print 2 "NOTE: using target " (string-intersperse (map cadr keyvals) "/") " for this run")
    (if (and runname (null? (filter (lambda (x)(not x)) keyvals))) ;; there must be a better way to "apply and"
	(let ((res #f))
	  (apply sqlite3:execute db (conc "INSERT OR IGNORE INTO runs (runname,state,status,owner,event_time" comma keystr ") VALUES (?,?,?,?,strftime('%s','now')" comma valslots ");")
		 allvals)
	  (apply sqlite3:for-each-row 
	   (lambda (id)
	     (set! res id))

;; runpatts: patt1,patt2 ...
;;
(define (db:get-runs db runpatt count offset keypatts)
  (let* ((res       '())
	 (keys       (db:get-keys db))
	 (runpattstr (db:patt->like "runname" runpatt))
	 (remfields  (list "id" "runname" "state" "status" "owner" "event_time"))
	 (header     (append keys remfields))

	 (keystr     (conc (keys->keystr keys) ","
		           (string-intersperse remfields ",")))
	 (qrystr     (conc "SELECT " keystr " FROM runs WHERE (" runpattstr ") " ;; runname LIKE ? "
		           ;; Generate: " AND x LIKE 'keypatt' ..."
		           (if (null? keypatts) ""
		               (conc " AND "
				     (string-join 
				      (map (lambda (keypatt)
					     (let ((key  (car keypatt))
						   (patt (cadr keypatt)))
					       (db:patt->like key patt)))
					   keypatts)
				      " AND ")))
		           " AND state != 'deleted' ORDER BY event_time DESC "
		           (if (number? count)
		               (conc " LIMIT " count)
		               "")
		           (if (number? offset)
		               (conc " OFFSET " offset)
		               ""))))
    (debug:print-info 11 "db:get-runs START qrystr: " qrystr " keypatts: " keypatts " offset: " offset " limit: " count)

(define (db:get-num-runs db runpatt)
  (let ((numruns 0))
    (debug:print-info 11 "db:get-num-runs START " runpatt)
    (sqlite3:for-each-row 
     (lambda (count)
       (set! numruns count))
     db
     "SELECT COUNT(id) FROM runs WHERE runname LIKE ? AND state != 'DELETED';" runpatt)
    (debug:print-info 11 "db:get-num-runs END " runpatt)
    numruns))

;; use (get-value-by-header (db:get-header runinfo)(db:get-row runinfo))
(define (db:get-run-info db run-id)
  ;;(if (hash-table-ref/default *run-info-cache* run-id #f)
  ;;    (hash-table-ref *run-info-cache* run-id)
      (let* ((res      #f)
	     (keys      (db:get-keys db))
	     (remfields (list "id" "runname" "state" "status" "owner" "event_time"))
	     (header    (append keys remfields))

	     (keystr    (conc (keys->keystr keys) ","
			      (string-intersperse remfields ","))))
	(debug:print-info 11 "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
	(sqlite3:for-each-row
	 (lambda (a . x)
	   (set! res (apply vector a x)))
	 db
	 (conc "SELECT " keystr " FROM runs WHERE id=? AND state != 'deleted';")
	 run-id)
	(debug:print-info 11 "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
	(let ((finalres (vector header res)))
	  ;; (hash-table-set! *run-info-cache* run-id finalres)
	  finalres)))

(define (db:set-comment-for-run db run-id comment)
  (debug:print-info 11 "db:set-comment-for-run START run-id: " run-id " comment: " comment)
  (sqlite3:execute db "UPDATE runs SET comment=? WHERE id=?;" comment run-id)
  (debug:print-info 11 "db:set-comment-for-run END run-id: " run-id " comment: " comment))

;; does not (obviously!) removed dependent data. But why not!!?
(define (db:delete-run db run-id)
  (common:clear-caches) ;; don't trust caches after doing any deletion
  (sqlite3:execute db "UPDATE runs SET state='deleted' WHERE id=?;" run-id))
;;  (sqlite3:execute db "DELETE FROM runs WHERE id=?;" run-id))



(define (db:update-run-event_time db run-id)
  (debug:print-info 11 "db:update-run-event_time START run-id: " run-id)
  (sqlite3:execute db "UPDATE runs SET event_time=strftime('%s','now') WHERE id=?;" run-id)
  (debug:print-info 11 "db:update-run-event_time END run-id: " run-id)) 

(define (db:lock/unlock-run db run-id lock unlock user)

;;======================================================================
;; K E Y S
;;======================================================================

;; get key val pairs for a given run-id
;; ( (FIELDNAME1 keyval1) (FIELDNAME2 keyval2) ... )
(define (db:get-key-val-pairs db run-id)
  (let* ((keys (db:get-keys db))
	 (res  '()))
    (debug:print-info 11 "db:get-key-val-pairs START keys: " keys " run-id: " run-id)
    (for-each 
     (lambda (key)
       (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	 ;; (debug:print 0 "qry: " qry)
	 (sqlite3:for-each-row 
	  (lambda (key-val)
	    (set! res (cons (list key key-val) res)))
	  db qry run-id)))
     keys)
    (debug:print-info 11 "db:get-key-val-pairs END keys: " keys " run-id: " run-id)
    (reverse res)))

;; get key vals for a given run-id
(define (db:get-key-vals db run-id)
   (let ((mykeyvals (hash-table-ref/default *keyvals* run-id #f)))
    (if mykeyvals 
	mykeyvals
  (let* ((keys (db:get-keys db))
	 (res  '()))
    (debug:print-info 11 "db:get-key-vals START keys: " keys " run-id: " run-id)
    (for-each 
     (lambda (key)
       (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	 ;; (debug:print 0 "qry: " qry)
	 (sqlite3:for-each-row 
	  (lambda (key-val)
	    (set! res (cons key-val res)))
	  db qry run-id)))
     keys)
    (debug:print-info 11 "db:get-key-vals END keys: " keys " run-id: " run-id)
	  (let ((final-res (reverse res)))
	    (hash-table-set! *keyvals* run-id final-res)
	    final-res)))))

;; The target is keyval1/keyval2..., cached in *target* as it is used often
(define (db:get-target db run-id)
  (let ((mytarg (hash-table-ref/default *target* run-id #f)))
    (if mytarg
	mytarg
  (let* ((keyvals (db:get-key-vals db run-id))
	 (thekey  (string-intersperse (map (lambda (x)(if x x "-na-")) keyvals) "/")))
	  (hash-table-set! *target* run-id thekey)
	  thekey))))

;;======================================================================
;;  T E S T S
;;======================================================================

			      (conc " status "
				    (if not-in "NOT" "") 
				    " IN ('" 
				    (string-intersperse statuses "','")
				    "')")))
	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT " qryvals
				" FROM tests WHERE run_id=? AND state != 'DELETED' "
				(if states-qry   (conc " AND " states-qry)   "")
				(if statuses-qry (conc " AND " statuses-qry) "")
				(if tests-match-qry (conc " AND (" tests-match-qry ") ") "")
				(case sort-by
				  ((rundir)     " ORDER BY length(rundir) DESC;")
				  ((event_time) " ORDER BY event_time ASC;")
				  (else         ";"))

			      (conc " status "
				    (if not-in "NOT" "") 
				    " IN ('" 
				    (string-intersperse statuses "','")
				    "')")))
	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT " qryvals 
				" FROM tests WHERE state != 'DELETED' AND " 
				(if run-ids
				    (if (list? run-ids)
					(conc " run_id in (" (string-intersperse (map conc run-ids) ",") ") ")
					(conc "run_id=" run-ids " "))
				    " ") ;; #f => run-ids don't filter on run-ids
				(if states-qry   (conc " AND " states-qry)   "")
				(if statuses-qry (conc " AND " statuses-qry) "")

(define (cdb:tests-register-test serverdat run-id test-name item-path)
  (cdb:client-call serverdat 'register-test #t *default-numtries* run-id test-name item-path))

(define (cdb:flush-queue serverdat)
  (cdb:client-call serverdat 'flush #f *default-numtries*))

(define (cdb:kill-server serverdat pid)
  (cdb:client-call serverdat 'killserver #t *default-numtries* pid))

(define (cdb:roll-up-pass-fail-counts serverdat run-id test-name item-path status)
  (cdb:client-call serverdat 'immediate #f *default-numtries* open-run-close db:roll-up-pass-fail-counts #f run-id test-name item-path status))

(define (cdb:get-test-info serverdat run-id test-name item-path)
  (cdb:client-call serverdat 'immediate #f *default-numtries* open-run-close db:get-test-info #f run-id test-name item-path))

			     (hash-table-set! *logged-in-clients* client-key (current-seconds))
			     (server:reply return-address qry-sig #t '(#t "successful login")))      ;; path matches - pass! Should vet the caller at this time ...
			   (server:reply return-address qry-sig #f (list #f (conc "Login failed due to mismatch paths: " calling-path ", " *toppath*)))))))
		((flush sync)
		 (server:reply return-address qry-sig #t 1)) ;; (length data)))
		((set-verbosity)
		 (set! *verbosity* (car params))
		 (server:reply return-address qry-sig #t (list #t *verbosity*)))
		((killserver)
		 (let ((hostname (car  *runremote*))
		       (port     (cadr *runremote*))
		       (pid      (car params)))
		   (debug:print 0 "WARNING: Server on " hostname ":" port " going down by user request!")
		   (debug:print-info 1 "current pid=" (current-process-id))
		   (open-run-close tasks:server-deregister tasks:open-db 

				   hostname
				   port: port)
		   (set! *server-run* #f)
		   (thread-sleep! 3)
		   (process-signal pid signal/kill)
		   (server:reply return-address qry-sig #t '(#t "exit process started"))))
		(else ;; not a command, i.e. is a query
		 (debug:print 0 "ERROR: Unrecognised query/command " stmt-key)
		 (server:reply return-address qry-sig #f 'failed)))))
	   (else
	    (debug:print-info 11 "Executing " stmt-key " for " params)
	    (apply sqlite3:execute (hash-table-ref queries stmt-key) params)
	    (server:reply return-address qry-sig #t #t)))))))

(include "db_records.scm")

(define (http-transport:make-server-url hostport)
  (if (not hostport)
      #f
      (conc "http://" (car hostport) ":" (cadr hostport))))

(define *server-loop-heart-beat* (current-seconds))
(define *heartbeat-mutex* (make-mutex))

;;======================================================================
;; S E R V E R
;;======================================================================

;; Call this to start the actual server

			      (set! res (with-input-from-request 
					 fullurl 
					 (list (cons 'dat msg)) 
					 read-string))
			      (close-all-connections!) 
			      (mutex-unlock! *http-mutex*)))
	      (time-out     (lambda ()
			      (thread-sleep! 45)
			      (if (not res)
				  (begin
				    (debug:print 0 "WARNING: communication with the server timed out.")
				    (mutex-unlock! *http-mutex*)
				    (http-transport:client-send-receive serverdat msg numretries: (- numretries 1))
				    (if (< numretries 3) ;; on last try just exit
					(begin

        (tasks:server-update-heartbeat tdb spid)
      
        ;; (if ;; (or (> numrunning 0) ;; stay alive for two days after last access
        (mutex-lock! *heartbeat-mutex*)
        (set! last-access *last-db-access*)
        (mutex-unlock! *heartbeat-mutex*)
	;; (debug:print 11 "last-access=" last-access ", server-timeout=" server-timeout)
        (if (and *server-run*
		 (> (+ last-access server-timeout)
		    (current-seconds)))
            (begin
              (debug:print-info 0 "Server continuing, seconds since last db access: " (- (current-seconds) last-access))
              (loop 0))
            (begin
              (debug:print-info 0 "Starting to shutdown the server.")
              ;; need to delete only *my* server entry (future use)
              (set! *time-to-exit* #t)
              (open-run-close tasks:server-deregister-self tasks:open-db (get-host-name))
              (thread-sleep! 1)

;;======================================================================
;; Copyright 2006-2012, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================




(define-inline (keys->valslots keys) ;; => ?,?,? ....
  (string-intersperse (map (lambda (x) "?") keys) ","))

(define-inline (keys->key/field keys . additional)
  (string-join (map (lambda (k)(conc k " TEXT"))

		    (append keys additional)) ","))

(define-inline (item-list->path itemdat)
  (if (list? itemdat)
      (string-intersperse  (map cadr itemdat) "/")
      ""))

(declare (unit keys))
(declare (uses common))

(include "key_records.scm")
(include "common_records.scm")









(define (keys->keystr keys) ;; => key1,key2,key3,additiona1, ...
  (string-intersperse keys ","))

(define (args:usage . a) #f)





;;======================================================================
;; key <=> target routines
;;======================================================================

;; This invalidates using "/" in item names. Every key will be
;; available via args:get-arg as :keyfield. Since this only needs to
;; be called once let's use it to set the environment vars
;;
;; The setting of :keyfield in args should be turned off ASAP
;;
(define (keys:target-set-args keys target ht)
  (let ((vals (string-split target "/")))
    (if (eq? (length vals)(length keys))
	(for-each (lambda (key val)
		    (setenv key val)
		    (hash-table-set! ht (conc ":" key) val))
		  keys
		  vals)
	(debug:print 0 "ERROR: wrong number of values in " target ", should match " keys))
    vals))

;; given the keys (a list of vectors <key field> or a list of keys) and a target return a keyval list
;; keyval list ( (key1 val1) (key2 val2) ...)
(define (keys:target->keyval keys target)
  (let* ((targlist (string-split target "/"))
	 (numkeys  (length keys))
	 (numtarg  (length targlist))
	 (targtweaked (if (> numkeys numtarg)
			  (append targlist (make-list (- numkeys numtarg) ""))
			  targlist)))
    (map (lambda (key targ)
	   (list key targ))
	 keys targtweaked)))


;;======================================================================
;; config file related routines
;;======================================================================












































(define (keys:config-get-fields confdat)
  (let ((fields (hash-table-ref/default confdat "fields" '())))

    (map car fields)))

	  (change-directory top-path)
	  (debug:print 2 "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  ;; Setup the *runremote* global var
	  (if *runremote* (debug:print 2 "ERROR: I'm not expecting *runremote* to be set at this time"))
	  ;; (set! *runremote* runremote)
	  (set! *transport-type* (string->symbol transport))
	  (set! keys       (cdb:remote-run db:get-keys #f))
	  (set! keyvals    (keys:target->keyval keys target))
	  ;; apply pre-overrides before other variables. The pre-override vars must not
	  ;; clobbers things from the official sources such as megatest.config and runconfigs.config
	  (if (string? set-vars)
	      (let ((varpairs (string-split set-vars ",")))
		(debug:print 4 "varpairs: " varpairs)
		(map (lambda (varpair)
		       (let ((varval (string-split varpair "=")))

	  ;; Can setup as client for server mode now
	  ;; (client:setup)

	  (change-directory *toppath*) 
	  (set-megatest-env-vars run-id) ;; these may be needed by the launching process
	  (change-directory work-area) 

	  (set-run-config-vars run-id keyvals target) ;; (db:get-target db run-id))
	  ;; environment overrides are done *before* the remaining critical envars.
	  (alist->env-vars env-ovrd)
	  (set-megatest-env-vars run-id)
	  (set-item-env-vars itemdat)
	  (save-environment-as-files "megatest")
	  ;; open-run-close not needed for test-set-meta-info
	  (tests:set-meta-info #f test-id run-id test-name itemdat 0 work-area)

;; 
;;  <linkdir> - <target> - <testname> [ - <itempath> ]
;; 
;; All log file links should be stored relative to the top of link path
;;  
;; <target> - <testname> [ - <itempath> ] 
;;
(define (create-work-area run-id run-info keyvals test-id test-src-path disk-path testname itemdat)
  (let* ((item-path (item-list->path itemdat))
	 (runname  (db:get-value-by-header (db:get-row run-info)
					   (db:get-header run-info)
					   "runname"))
	 ;; convert back to db: from rdb: - this is always run at server end
	 (target   (string-intersperse (map cadr keyvals) "/"))

	 (not-iterated  (equal? "" item-path))

	 ;; all tests are found at <rundir>/test-base or <linkdir>/test-base
	 (testtop-base (conc target "/" runname "/" testname))
	 (test-base    (conc testtop-base (if not-iterated "" "/") item-path))

;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch
;;      (launch-test db (cadr status) test-conf))
(define (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat params)
  (change-directory *toppath*)
  (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
   (list ;; (list "MT_TEST_RUN_DIR" work-area)
    (list "MT_RUN_AREA_HOME" *toppath*)
    (list "MT_TEST_NAME" test-name)
    ;; (list "MT_ITEM_INFO" (conc itemdat)) 
    (list "MT_RUNNAME"   runname)

	 (diskpath   #f)
	 (cmdparms   #f)
	 (fullcmd    #f) ;; (define a (with-output-to-string (lambda ()(write x))))
	 (mt-bindir-path #f)
	 (item-path (item-list->path itemdat))
	 ;; (test-id    (cdb:remote-run db:get-test-id #f run-id test-name item-path))
	 (testinfo   (cdb:get-test-info-by-id *runremote* test-id))
	 (mt_target  (string-intersperse (map cadr keyvals) "/"))
	 (debug-param (append (if (args:get-arg "-debug")  (list "-debug" (args:get-arg "-debug")) '())
			      (if (args:get-arg "-logging")(list "-logging") '()))))
    (if hosts (set! hosts (string-split hosts)))
    ;; set the megatest to be called on the remote host
    (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
    (set! mt-bindir-path (pathname-directory remote-megatest))
    (if launcher (set! launcher (string-split launcher)))
    ;; set up the run work area for this test
    (set! diskpath (get-best-disk *configdat*))
    (if diskpath
	(let ((dat  (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
	  (set! work-area (car dat))
	  (set! toptest-work-area (cadr dat))
	  (debug:print-info 2 "Using work area " work-area))
	(begin
	  (set! work-area (conc test-path "/tmp_run"))
	  (create-directory work-area #t)
	  (debug:print 0 "WARNING: No disk work area specified - running in the test directory under tmp_run")))

				     (list 'itemdat   itemdat  )
				     (list 'megatest  remote-megatest)
				     (list 'ezsteps   ezsteps) 
				     (list 'target    mt_target)
				     (list 'env-ovrd  (hash-table-ref/default *configdat* "env-override" '())) 
				     (list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
				     (list 'runname   runname)
				     (list 'mt-bindir-path mt-bindir-path)))))))
    ;; clean out step records from previous run if they exist
    ;; (debug:print-info 4 "FIXMEEEEE!!!! This can be removed some day, perhaps move all test records to the test db?")
    ;; (open-run-close db:delete-test-step-records db test-id)
    (change-directory work-area) ;; so that log files from the launch process don't clutter the test dir
    (tests:test-set-status! test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
    (cond
     ((and launcher hosts) ;; must be using ssh hostname

;; Always use two digit decimal
;; 1.01, 1.02...1.10,1.11 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.5502)

(declare (uses db))

(define *db* #f) ;; this is only for the repl, do not use in general!!!!

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")
(include "megatest-fossil-hash.scm")

(let ((debugcontrolf (conc (get-environment-variable "HOME") "/.megatestrc")))
  (if (file-exists? debugcontrolf)
      (load debugcontrolf)))

                            Optionally use :state and :status
  -set-state-status X,Y   : set state to X and status to Y, requires controls per -remove-runs
  -rerun FAIL,WARN...     : force re-run for tests with specificed status(s)
  -rollup                 : (currently disabled) fill run (set by :runname)  with latest test(s)
                            from prior runs with same keys
  -lock                   : lock run specified by target and runname
  -unlock                 : unlock run specified by target and runname
  -run-wait               : wait on run specified by target and runname

Selectors (e.g. use for -runtests, -remove-runs, -set-state-status, -list-runs etc.)
  -target key1/key2/...   : run for key1, key2, etc.
  -reqtarg key1/key2/...  : run for key1, key2, etc. but key1/key2 must be in runconfig
  -testpatt patt1/patt2,patt3/...  : % is wildcard
  :runname                : required, name for this particular test run
  :state                  : Applies to runs, tests or steps depending on context

  :units                  : name of the units for value, expected_value etc. (optional)
  -load-test-data         : read test specific data for storage in the test_data table
                            from standard in. Each line is comma delimited with four
                            fields category,variable,value,comment

Queries
  -list-runs patt         : list runs matching pattern \"patt\", % is the wildcard
  -show-keys              : show the keys used in this megatest setup
  -test-files targpatt    : get the most recent test path/file matching targpatt e.g. %/%... 
                            returns list sorted by age ascending, see examples below
  -test-paths             : get the test paths matching target, runname, item and test
                            patterns.
  -list-disks             : list the disks available for storing runs
  -list-targets           : list the targets in runconfigs.config
  -list-db-targets        : list the target combinations used in the db
  -show-config            : dump the internal representation of the megatest.config file

  -setvars VAR1=val1,VAR2=val2 : Add environment variables to a run NB// these are
                                 overwritten by values set in config files.
  -server -|hostname      : start the server (reduces contention on megatest.db), use
                            - to automatically figure out hostname
  -transport http|fs      : use http or direct access for transport (default is http) 
  -daemonize              : fork into background and disconnect from stdin/out
  -list-servers           : list the servers 
  -stop-server id         : stop server specified by id (see output of -list-servers), use
                            0 to kill all
  -repl                   : start a repl (useful for extending megatest)
  -load file.scm          : load and run file.scm

Spreadsheet generation
  -extract-ods fname.ods  : extract an open document spreadsheet from the database
  -pathmod path           : insert path, i.e. path/runame/itempath/logfile.html
                            will clear the field if no rundir/testname/itempath/logfile

			"-dumpmode"
			) 
		 (list  "-h"
			"-version"
		        "-force"
		        "-xterm"
		        "-showkeys"
		        "-show-keys"
		        "-test-status"
			"-set-values"
			"-load-test-data"
			"-summarize-items"
		        "-gui"
			"-daemonize"
			;; misc
			"-archive"
			"-repl"
			"-lock"
			"-unlock"
			"-list-servers"
                        "-run-wait"      ;; wait on a run to complete (i.e. no RUNNING)

			;; misc queries
			"-list-disks"
			"-list-targets"
			"-list-db-targets"
			"-show-runconfig"
			"-show-config"
			"-show-cmdinfo"
			;; queries

		 (if (equal? state "dead")
		     (if (> last-update (* 25 60 60)) ;; keep records around for slighly over a day.
			 (open-run-close tasks:server-deregister tasks:open-db hostname pullport: pullport pid: pid action: 'delete))
		     (if (> last-update 20)        ;; Mark as dead if not updated in last 20 seconds
			 (open-run-close tasks:server-deregister tasks:open-db hostname pullport: pullport pid: pid)))
		 (format #t fmtstr id mt-ver pid hostname interface pullport pubport last-update
			 (if status "alive" "dead") transport)
		 (if (or (equal? id sid)
			 (equal? sid 0)) ;; kill all/any
		     (begin
		       (debug:print-info 0 "Attempting to stop server with pid " pid)
		       (tasks:kill-server status hostname pullport pid transport)))))
	     servers)
	    (debug:print-info 1 "Done with listservers")
	    (set! *didsomething* #t)
	    (exit)) ;; must do, would have to add checks to many/all calls below

;;======================================================================
;; Remove old run(s)
;;======================================================================

;; since several actions can be specified on the command line the removal
;; is done first
(define (operate-on action)
  (let* ((runrec (runs:runrec-make-record))
	 (target (or (args:get-arg "-reqtarg")
		     (args:get-arg "-target"))))
    (cond
     ((not target)
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify -target or -reqtarg")
      (exit 1))
     ((not (args:get-arg ":runname"))
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify the run name pattern with :runname patt")
      (exit 2))
     ((not (args:get-arg "-testpatt"))
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify the test pattern with -testpatt")
      (exit 3))
     (else
      (if (not (car *configinfo*))
	  (begin
	    (debug:print 0 "ERROR: Attempted " action "on test(s) but run area config file not found")
	    (exit 1))
	  ;; put test parameters into convenient variables
	  (runs:operate-on  action
			    target
			    (args:get-arg ":runname")
			    (args:get-arg "-testpatt")
			    state: (args:get-arg ":state") 
			    status: (args:get-arg ":status")
			    new-state-status: (args:get-arg "-set-state-status")))
      (set! *didsomething* #t)))))
	  
(if (args:get-arg "-remove-runs")
    (general-run-call 
     "-remove-runs"
     "remove runs"
     (lambda (target runname keys keyvals)
       (operate-on 'remove-runs))))

(if (args:get-arg "-set-state-status")
    (general-run-call 
     "-set-state-status"
     "set state and status"
     (lambda (target runname keys keyvals)
       (operate-on 'set-state-status))))

;;======================================================================
;; Query runs
;;======================================================================

(if (or (args:get-arg "-list-runs")
	(args:get-arg "-list-db-targets"))
    (if (setup-for-run)
	(let* ((db       #f)
	       (runpatt  (args:get-arg "-list-runs"))
	       (testpatt (if (args:get-arg "-testpatt") 
			     (args:get-arg "-testpatt") 
			     "%"))
	       (runsdat  (cdb:remote-run db:get-runs #f runpatt #f #f '()))
	       (runs     (db:get-rows runsdat))
	       (header   (db:get-header runsdat))
	       (keys     (cdb:remote-run db:get-keys #f))

	       (db-targets (args:get-arg "-list-db-targets"))
	       (seen     (make-hash-table)))
	  ;; Each run
	  (for-each 
	   (lambda (run)
	     (let ((targetstr (string-intersperse (map (lambda (x)
							 (db:get-value-by-header run header x))
						       keys) "/")))
	       (if db-targets
		   (if (not (hash-table-ref/default seen targetstr #f))
		       (begin
			 (hash-table-set! seen targetstr #t)
			 ;; (print "[" targetstr "]"))))
			 (print targetstr))))
	       (if (not db-targets)

;;   process deferred tasks per above steps

;; run all tests are are Not COMPLETED and PASS or CHECK
(if (args:get-arg "-runall")
    (general-run-call 
     "-runall"
     "run all tests"
     (lambda (target runname keys keyvals)
       (runs:run-tests target
		       runname

		       (args:get-arg "-testpatt")
		       user
		       args:arg-hash))))

;;======================================================================
;; run one test
;;======================================================================

;;    - if test run time > allowed run time then kill job
;;    - if cannot access db > allowed disconnect time then kill job

(if (args:get-arg "-runtests")
  (general-run-call 
   "-runtests" 
   "run a test" 
   (lambda (target runname keys keyvals)
     (runs:run-tests target
		     runname

		     (args:get-arg "-runtests")
		     user
		     args:arg-hash))))

;;======================================================================
;; Rollup into a run
;;======================================================================

(if (args:get-arg "-rollup")



    (general-run-call 
     "-rollup" 
     "rollup tests" 
     (lambda (target runname keys keyvals)
       (runs:rollup-run keys
			keyvals
			(args:get-arg ":runname") 
			user))))

;;======================================================================
;; Lock or unlock a run
;;======================================================================

(if (or (args:get-arg "-lock")(args:get-arg "-unlock"))
    (general-run-call 
     (if (args:get-arg "-lock") "-lock" "-unlock")
     "lock/unlock tests" 
     (lambda (target runname keys keyvals)
       (runs:handle-locking 
		  target
		  keys
		  (args:get-arg ":runname") 
		  (args:get-arg "-lock")
		  (args:get-arg "-unlock")
		  user))))

		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -test-paths or -test-files, exiting")
		(exit 1)))
	  (let* ((keys     (cdb:remote-run db:get-keys db))

		 ;; db:test-get-paths must not be run remote
		 (paths    (db:test-get-paths-matching db keys target (args:get-arg "-test-files"))))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(print path))
		      paths)))
	;; else do a general-run-call
	(general-run-call 
	 "-test-files"
	 "Get paths to test"
	 (lambda (target runname keys keyvals)
	   (let* ((db       #f)
		  ;; DO NOT run remote
		  (paths    (db:test-get-paths-matching db keys target (args:get-arg "-test-files"))))
	     (for-each (lambda (path)
			 (print path))
		       paths))))))

;;======================================================================
;; Archive tests
;;======================================================================

		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -archive, exiting")
		(exit 1)))
	  (let* ((keys     (cdb:remote-run db:get-keys db))

		 ;; DO NOT run remote
		 (paths    (db:test-get-paths-matching db keys target)))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(print path))
		      paths)))
	;; else do a general-run-call
	(general-run-call 
	 "-test-paths"
	 "Get paths to tests"
	 (lambda (target runname keys keyvals)
	   (let* ((db       #f)
		  ;; DO NOT run remote
		  (paths    (db:test-get-paths-matching db keys target)))
	     (for-each (lambda (path)
			 (print path))
		       paths))))))

;;======================================================================
;; Extract a spreadsheet from the runs database
;;======================================================================

(if (args:get-arg "-extract-ods")
    (general-run-call
     "-extract-ods"
     "Make ods spreadsheet"
     (lambda (target runname keys keyvals)
       (let ((db         #f)
	     (outputfile (args:get-arg "-extract-ods"))
	     (runspatt   (args:get-arg ":runname"))
	     (pathmod    (args:get-arg "-pathmod")))
	     ;; (keyvalalist (keys->alist keys "%")))
	 (debug:print 2 "Extract ods, outputfile: " outputfile " runspatt: " runspatt " keyvalalist: " keyvals)
	 (cdb:remote-run db:extract-ods-file db outputfile keyvalalist (if runspatt runspatt "%") pathmod)))))

;;======================================================================
;; execute the test
;;    - gets called on remote host
;;    - receives info from the -execute param
;;    - passes info to steps via MT_CMDINFO env var (future is to use a dot file)

	  (if db (sqlite3:finalize! db))
	  (set! *didsomething* #t))))

;;======================================================================
;; Various helper commands can go below here
;;======================================================================

(if (or (args:get-arg "-showkeys")
        (args:get-arg "-show-keys"))
    (let ((db #f)
	  (keys #f))
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "Failed to setup, exiting")
	    (exit 1)))
      (set! keys (cdb:remote-run db:get-keys db))
      (debug:print 1 "Keys: " (string-intersperse keys ", "))
      (if db (sqlite3:finalize! db))
      (set! *didsomething* #t)))

(if (args:get-arg "-gui")
    (begin
      (debug:print 0 "Look at the dashboard for now")
      ;; (megatest-gui)

      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; keep this one local
      (open-run-close patch-db #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Wait on a run to complete
;;======================================================================

(if (args:get-arg "-run-wait")
    (begin
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      (operate-on 'run-wait)
      (set! *didsomething* #t)))

;;======================================================================
;; Update the tests meta data from the testconfig files
;;======================================================================

(if (args:get-arg "-update-meta")
    (begin

    ;; NOTE: Also build the test tree browser and look up table
    ;;
    ;; Each run is unique on its keys and runname or run-id, store in hash on colnum
    (for-each (lambda (run-id)
		(let* ((run-record (hash-table-ref/default runs-hash run-id #f))
		       (key-vals   (map (lambda (key)(db:get-value-by-header run-record header key))
					keys))
		       (run-name   (db:get-value-by-header run-record header "runname"))
		       (col-name   (conc (string-intersperse key-vals "\n") "\n" run-name))
		       (run-path   (append key-vals (list run-name))))
		  (hash-table-set! (dboard:data-get-run-keys *data*) run-id run-path)
		  (iup:attribute-set! (dboard:data-get-runs-matrix *data*)
				      (conc rownum ":" colnum) col-name)
		  (hash-table-set! runid-to-col run-id (list colnum run-record))

;; test-records is a hash table testname:item_path => vector < testname testconfig waitons priority items-info ... >
(define (runs:run-tests-queue-classic run-id runname test-records keyvals flags test-patts required-tests)
    ;; At this point the list of parent tests is expanded 
    ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", flags: " (hash-table->alist flags))
  (let ((run-info              (cdb:remote-run db:get-run-info #f run-id))

	(sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
	(test-registry         (make-hash-table))
	(registry-mutex        (make-mutex))
	(num-retries           0)
	(max-retries           (config-lookup *configdat* "setup" "maxretries"))
	(max-concurrent-jobs   (let ((mcj (config-lookup *configdat* "setup"     "max_concurrent_jobs")))
				 (if (and mcj (string->number mcj))
				     (string->number mcj)
				     1))))
    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))
    (if (not (null? sorted-test-names))
	(let loop ((hed         (car sorted-test-names))
		   (tal         (cdr sorted-test-names))
		   (reruns      '()))
	  (if (not (null? reruns))(debug:print-info 4 "reruns=" reruns))
	  ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
	  (let* ((test-record (hash-table-ref test-records hed))
		 (test-name   (tests:testqueue-get-testname test-record))
		 (tconfig     (tests:testqueue-get-testconfig test-record))
		 (jobgroup    (config-lookup tconfig "requirements" "jobgroup"))
		 (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))
				(if m (string->symbol m) 'normal)))
		 (waitons     (tests:testqueue-get-waitons    test-record))
		 (priority    (tests:testqueue-get-priority   test-record))
		 (itemdat     (tests:testqueue-get-itemdat    test-record)) ;; itemdat can be a string, list or #f
		 (items       (tests:testqueue-get-items      test-record))
		 (item-path   (item-list->path itemdat))

		  (set! waiton (filter (lambda (x)(not (equal? x hed))) waitons))))

	    (cond ;; OUTER COND
	     ((not items) ;; when false the test is ok to be handed off to launch (but not before)
	      (if (and (not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path required: required-tests))
	               (not (null? tal)))
	          (loop (car newtal)(cdr newtal) reruns))
	      (let* ((run-limits-info         ;; (cdb:remote-run runs:can-run-more-tests #f jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
		      (open-run-close runs:can-run-more-tests #f jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
		     (have-resources          (car run-limits-info))
		     (num-running             (list-ref run-limits-info 1))
		     (num-running-in-jobgroup (list-ref run-limits-info 2))
		     (max-concurrent-jobs     (list-ref run-limits-info 3))
		     (job-group-limit         (list-ref run-limits-info 4))
		     (prereqs-not-met         (db:get-prereqs-not-met run-id waitons item-path mode: testmode))
		     (fails                   (runs:calc-fails prereqs-not-met))

		 ;; Registry has been started for this test but has not yet completed
		 ;; this should be rare, the case where there are only a couple of tests and the db is slow
		 ;; delay a short while and continue
		 ;; ((eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f) 'start)
		 ;;  (thread-sleep! 0.01)
		 ;;  (loop (car newtal)(cdr newtal) reruns))
		 ;; count number of 'done, if more than 100 then skip on through.

		 ((not (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f)) ;; ) ;; too many changes required. Implement later.
		  (debug:print-info 4 "Pre-registering test " test-name "/" item-path " to create placeholder" )

		  (let ((th (make-thread (lambda ()
		        		   (mutex-lock! registry-mutex)
		        		   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'start)
		        		   (mutex-unlock! registry-mutex)
					   ;; If haven't done it before register a top level test if this is an itemized test
					   (if (not (eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f) 'done))
					       (cdb:tests-register-test *runremote* run-id test-name ""))
					   (cdb:tests-register-test *runremote* run-id test-name item-path)
		        		   (mutex-lock! registry-mutex)
					   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'done)
		        		   (mutex-unlock! registry-mutex))
		        		 (conc test-name "/" item-path))))
		    (thread-start! th))

		  (runs:shrink-can-run-more-tests-count)   ;; DELAY TWEAKER (still needed?)
		  (loop (car newtal)(cdr newtal) reruns))
		 ;; At this point *all* test registrations must be completed.
		 ((not (null? (filter (lambda (x)(eq? 'start x))(hash-table-values test-registry))))
		  (debug:print-info 0 "Waiting on test registrations: " (string-intersperse 
									 (filter (lambda (x)
										   (eq? (hash-table-ref/default test-registry x #f) 'start))

		  (thread-sleep! 1) ;; (+ 2 *global-delta*))
		  ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
		  (loop (car newtal)(cdr newtal) reruns))
		 ((and have-resources
		       (or (null? prereqs-not-met)
			   (and (eq? testmode 'toplevel)
				(null? non-completed))))
		  (run:test run-id run-info keyvals runname test-record flags #f)
		  (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'running)
		  (runs:shrink-can-run-more-tests-count)  ;; DELAY TWEAKER (still needed?)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (car tal)(cdr tal) reruns)))
		 (else ;; must be we have unmet prerequisites
		    (debug:print 4 "FAILS: " fails)

		    (debug:print-info 4 "End of items list, looping with next after short delay")
                    ;; (thread-sleep! (+ 0.01 *global-delta*))
		    (loop (car tal)(cdr tal) reruns))))

	     ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	     ;;    - but only do that if resources exist to kick off the job
	     ((or (procedure? items)(eq? items 'have-procedure))
	      (let ((can-run-more    ;; (cdb:remote-run runs:can-run-more-tests #f jobgroup max-concurrent-jobs)))
		     (open-run-close runs:can-run-more-tests #f jobgroup max-concurrent-jobs)))
		(if (and (list? can-run-more)
			 (car can-run-more))
		    (let* ((prereqs-not-met (db:get-prereqs-not-met run-id waitons item-path mode: testmode))
			   (fails           (runs:calc-fails prereqs-not-met))
			   (non-completed   (runs:calc-not-completed prereqs-not-met)))
		      (debug:print-info 8 "can-run-more: " can-run-more
				   "\n testname:        " hed

;; test-records is a hash table testname:item_path => vector < testname testconfig waitons priority items-info ... >
(define (runs:run-tests-queue-new run-id runname test-records keyvals flags test-patts required-tests reglen)
  ;; At this point the list of parent tests is expanded 
  ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", flags: " (hash-table->alist flags))
  (let ((run-info              (cdb:remote-run db:get-run-info #f run-id))
	(tests-info            (cdb:remote-run db:get-tests-for-run #f run-id #f '() '())) ;;  qryvals: "id,testname,item_path"))
	(sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
	(test-registry         (make-hash-table))
	(registry-mutex        (make-mutex))
	(num-retries           0)
	(max-retries           (config-lookup *configdat* "setup" "maxretries"))
	(max-concurrent-jobs   (let ((mcj (config-lookup *configdat* "setup"     "max_concurrent_jobs")))
				 (if (and mcj (string->number mcj))
				     (string->number mcj)
				     1)))) ;; length of the register queue ahead
    ;; Initialize the test-registery hash with tests that already have a record
    (for-each (lambda (trec)
		(let ((id (db:test-get-id        trec))
		      (tn (db:test-get-testname  trec))
		      (ip (db:test-get-item-path trec))
		      (st (db:test-get-state     trec)))
		  (hash-table-set! test-registry (runs:make-full-test-name tn ip) (string->symbol st))))
	      tests-info)
    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))
    (if (not (null? sorted-test-names))
	(let loop ((hed         (car sorted-test-names))
		   (tal         (cdr sorted-test-names))
		   (reg         '()) ;; registered, put these at the head of tal 
		   (reruns      '()))
	  (if (not (null? reruns))(debug:print-info 4 "reruns=" reruns))
	  ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
	  (let* ((test-record (hash-table-ref test-records hed))
		 (test-name   (tests:testqueue-get-testname test-record))
		 (tconfig     (tests:testqueue-get-testconfig test-record))
		 (jobgroup    (config-lookup tconfig "requirements" "jobgroup"))
		 (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))
				(if m (string->symbol m) 'normal)))
		 (waitons     (tests:testqueue-get-waitons    test-record))
		 (priority    (tests:testqueue-get-priority   test-record))
		 (itemdat     (tests:testqueue-get-itemdat    test-record)) ;; itemdat can be a string, list or #f
		 (items       (tests:testqueue-get-items      test-record))
		 (item-path   (item-list->path itemdat))
		 (tfullname   (runs:make-full-test-name test-name item-path))
		 (newtal      (append tal (list hed)))
		 (regfull     (> (length reg) reglen)))

	    ;; Fast skip of tests that are already "COMPLETED"
	    (if (equal? (hash-table-ref/default test-registry tfullname #f) 'COMPLETED)
		(begin
		  (debug:print-info 0 "Skipping COMPLETED test " tfullname)
		  (if (not (null? tal))
		      (loop (car tal)(cdr tal) reg reruns))))
	    ;; (if (> (length reg) 10)
	    ;;     (begin
	    ;;       (set! tal (cons hed tal))
	    ;;       (set! hed (car reg))
	    ;;       (set! reg (cdr reg))
	    ;;       (set! newtal tal)))
	    (debug:print 6

	    (if (member test-name waitons)
		(begin
		  (debug:print 0 "ERROR: test " test-name " has listed itself as a waiton, please correct this!")
		  (set! waiton (filter (lambda (x)(not (equal? x hed))) waitons))))

	    (cond ;; OUTER COND
	     ((not items) ;; when false the test is ok to be handed off to launch (but not before)
	      (if (and (not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path required: required-tests))
	               (not (null? tal)))
	          (loop (car tal)(cdr tal) reg reruns))
	      (let* ((run-limits-info         (cdb:remote-run runs:can-run-more-tests #f jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
		      ;; (open-run-close runs:can-run-more-tests #f jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
		     (have-resources          (car run-limits-info))
		     (num-running             (list-ref run-limits-info 1))
		     (num-running-in-jobgroup (list-ref run-limits-info 2))
		     (max-concurrent-jobs     (list-ref run-limits-info 3))
		     (job-group-limit         (list-ref run-limits-info 4))
		     (prereqs-not-met         (db:get-prereqs-not-met run-id waitons item-path mode: testmode))
		     (fails                   (runs:calc-fails prereqs-not-met))
		     (non-completed           (runs:calc-not-completed prereqs-not-met)))
		(debug:print-info 8 "have-resources: " have-resources " prereqs-not-met: " 
			     (string-intersperse 
			      (map (lambda (t)
				     (if (vector? t)
					 (conc (db:test-get-state t) "/" (db:test-get-status t))
					 (conc " WARNING: t is not a vector=" t )))
				   prereqs-not-met) ", ") " fails: " fails)
		(debug:print-info 4 "hed=" hed "\n  test-record=" test-record "\n  test-name: " test-name "\n  item-path: " item-path "\n  test-patts: " test-patts)

		;; Don't know at this time if the test have been launched at some time in the past
		;; i.e. is this a re-launch?
		(debug:print-info 4 "run-limits-info = " run-limits-info)
		(cond ;; INNER COND #1 for a launchable test
		 ;; Check item path against item-patts
		 ((not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path required: required-tests)) ;; This test/itempath is not to be run
		  ;; else the run is stuck, temporarily or permanently
		  ;; but should check if it is due to lack of resources vs. prerequisites
		  (debug:print-info 1 "Skipping " (tests:testqueue-get-testname test-record) " " item-path " as it doesn't match " test-patts)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (runs:queue-next-hed tal reg reglen regfull)
			    (runs:queue-next-tal tal reg reglen regfull)
			    (runs:queue-next-reg tal reg reglen regfull)
			    reruns)))
		 ;; Registry has been started for this test but has not yet completed
		 ;; this should be rare, the case where there are only a couple of tests and the db is slow
		 ;; delay a short while and continue
		 ;; ((eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f) 'start)
		 ;;  (thread-sleep! 0.01)
		 ;;  (loop (car newtal)(cdr newtal) reruns))
		 ;; count number of 'done, if more than 100 then skip on through.
		 ((not (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f)) ;; ) ;; too many changes required. Implement later.
		  (debug:print-info 4 "Pre-registering test " test-name "/" item-path " to create placeholder" )
		  (let ((th (make-thread (lambda ()
		        		   (mutex-lock! registry-mutex)
		        		   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'start)
		        		   (mutex-unlock! registry-mutex)
					   ;; If haven't done it before register a top level test if this is an itemized test
					   (if (not (eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f) 'done))
					       (cdb:tests-register-test *runremote* run-id test-name ""))
					   (cdb:tests-register-test *runremote* run-id test-name item-path)
		        		   (mutex-lock! registry-mutex)
					   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'done)
		        		   (mutex-unlock! registry-mutex))
		        		 (conc test-name "/" item-path))))
		    (thread-start! th))
		  (cdb:remote-run runs:shrink-can-run-more-tests-count #f)   ;; DELAY TWEAKER (still needed?)
		  (if (and (null? tal)(null? reg))
		      (loop hed tal reg reruns)
		      (loop (runs:queue-next-hed tal reg reglen regfull)
			    (runs:queue-next-tal tal reg reglen regfull)
			    (let ((newl (append reg (list hed))))
			      (if regfull 
				  (cdr newl)

		  (thread-sleep! 1) ;; (+ 2 *global-delta*))
		  ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
		  (loop (car newtal)(cdr newtal) reg reruns))
		 ((and have-resources
		       (or (null? prereqs-not-met)
			   (and (eq? testmode 'toplevel)
				(null? non-completed))))
		  (run:test run-id run-info keyvals runname test-record flags #f)
		  (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'running)
		  (cdb:remote-run runs:shrink-can-run-more-tests-count #f)  ;; DELAY TWEAKER (still needed?)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (runs:queue-next-hed tal reg reglen regfull)
			    (runs:queue-next-tal tal reg reglen regfull)
			    (runs:queue-next-reg tal reg reglen regfull)
			    reruns)))
		 (else ;; must be we have unmet prerequisites

			(loop (car newtal)(cdr newtal) reg reruns))
		      ;; the waiton is FAIL so no point in trying to run hed ever again
		      (if (not (null? tal))
			  (if (vector? hed)
			      (begin 
				(debug:print 1 "WARN: Dropping test " (db:test-get-testname hed) "/" (db:test-get-item-path hed)
					     " from the launch list as it has prerequistes that are FAIL")
				(cdb:remote-run runs:shrink-can-run-more-tests-count #f) ;; DELAY TWEAKER (still needed?)
				;; (thread-sleep! *global-delta*)
				(hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'removed)
				(loop (runs:queue-next-hed tal reg reglen regfull)
				      (runs:queue-next-tal tal reg reglen regfull)
				      (runs:queue-next-reg tal reg reglen regfull)
				      (cons hed reruns)))
			      (begin
				(debug:print 1 "WARN: Test not processed correctly. Could be a race condition in your test implementation? " hed) ;;  " as it has prerequistes that are FAIL. (NOTE: hed is not a vector)")
				(cdb:remote-run runs:shrink-can-run-more-tests-count #f) ;; DELAY TWEAKER (still needed?)
				;; (thread-sleep! (+ 0.01 *global-delta*))
				(loop hed tal reg reruns))))))))) ;; END OF INNER COND
	     
	     ;; case where an items came in as a list been processed
	     ((and (list? items)     ;; thus we know our items are already calculated
		   (not   itemdat)) ;; and not yet expanded into the list of things to be done
	      (if (and (debug:debug-mode 1) ;; (>= *verbosity* 1)
		       (> (length items) 0)
		       (> (length (car items)) 0))
		  (pp items))
	      (for-each
	       (lambda (my-itemdat)
		 (let* ((new-test-record (let ((newrec (make-tests:testqueue)))
					   (vector-copy! test-record newrec)
					   newrec))
			(my-item-path (item-list->path my-itemdat)))
		   (if (tests:match test-patts hed my-item-path required: required-tests) ;; (patt-list-match my-item-path item-patts)           ;; yes, we want to process this item, NOTE: Should not need this check here!
		       (let ((newtestname (runs:make-full-test-name hed my-item-path)))    ;; test names are unique on testname/item-path
			 (tests:testqueue-set-items!     new-test-record #f)
			 (tests:testqueue-set-itemdat!   new-test-record my-itemdat)
			 (tests:testqueue-set-item_path! new-test-record my-item-path)
			 (hash-table-set! test-records newtestname new-test-record)
			 (set! tal (cons newtestname tal)))))) ;; since these are itemized create new test names testname/itempath
	       items)
	      (if (not (null? tal))
		  (begin
		    (debug:print-info 4 "End of items list, looping with next after short delay")
		    ;; (thread-sleep! (+ 0.01 *global-delta*))
		    (loop (runs:queue-next-hed tal reg reglen regfull)
			  (runs:queue-next-tal tal reg reglen regfull)
			  (runs:queue-next-reg tal reg reglen regfull)
			  reruns))))

	     ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	     ;;    - but only do that if resources exist to kick off the job
	     ((or (procedure? items)(eq? items 'have-procedure))
	      (let ((can-run-more    (cdb:remote-run runs:can-run-more-tests #f jobgroup max-concurrent-jobs)))
		(if (and (list? can-run-more)
			 (car can-run-more))
		    (let* ((prereqs-not-met (db:get-prereqs-not-met run-id waitons item-path mode: testmode))
			   (fails           (runs:calc-fails prereqs-not-met))
			   (non-completed   (runs:calc-not-completed prereqs-not-met)))
		      (debug:print-info 8 "can-run-more: " can-run-more
					"\n testname:        " hed

		       ((or (null? prereqs-not-met) ;; all prereqs met, fire off the test
			    ;; or, if it is a 'toplevel test and all prereqs not met are COMPLETED then launch
			    (and (eq? testmode 'toplevel)
				 (null? non-completed)))
			(let ((test-name (tests:testqueue-get-testname test-record)))
			  (setenv "MT_TEST_NAME" test-name) ;; 
			  (setenv "MT_RUNNAME"   runname)
			  (set-megatest-env-vars run-id inrunname: runname) ;; these may be needed by the launching process
			  (let ((items-list (items:get-items-from-config tconfig)))
			    (if (list? items-list)
				(begin
				  (tests:testqueue-set-items! test-record items-list)
				  ;; (thread-sleep! *global-delta*)
				  (loop hed tal reg reruns))
				(begin

				(loop (runs:queue-next-hed tal reg reglen regfull)
				      (runs:queue-next-tal tal reg reglen regfull)
				      (runs:queue-next-reg tal reg reglen regfull)
				      reruns))
			    (loop (car newtal)(cdr newtal) reg reruns))) ;; an issue with prereqs not yet met?
		       ((and (not (null? fails))(eq? testmode 'normal))
			(debug:print-info 1 "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
				     (string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
				     ", removing it from to-do list")
			(if (not (null? tal))
			    (begin
			      ;; (thread-sleep! *global-delta*)
			      (loop (runs:queue-next-hed tal reg reglen regfull)
				    (runs:queue-next-tal tal reg reglen regfull)
				    (runs:queue-next-reg tal reg reglen regfull)
				    (cons hed reruns)))))

;;======================================================================
;; Copyright 2006-2012, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

(define-inline (runs:runrec-make-record) (make-vector 13))
(define-inline (runs:runrec-get-target  vec)(vector-ref vec 0))  ;; a/b/c
(define-inline (runs:runrec-get-runname vec)(vector-ref vec 1))  ;; string
(define-inline (runs:runrec-testpatt    vec)(vector-ref vec 2))  ;; a,b/c,d%
(define-inline (runs:runrec-keys        vec)(vector-ref vec 3))  ;; (key1 key2 ...)
(define-inline (runs:runrec-keyvals     vec)(vector-ref vec 4))  ;; ((key1 val1)(key2 val2) ...)
(define-inline (runs:runrec-environment vec)(vector-ref vec 5))  ;; environment, alist key val
(define-inline (runs:runrec-mconfig     vec)(vector-ref vec 6))  ;; megatest.config
(define-inline (runs:runrec-runconfig   vec)(vector-ref vec 7))  ;; runconfigs.config
(define-inline (runs:runrec-serverdat   vec)(vector-ref vec 8))  ;; (host port)
(define-inline (runs:runrec-transport   vec)(vector-ref vec 9))  ;; 'http
(define-inline (runs:runrec-db          vec)(vector-ref vec 10)) ;; <sqlite3db> (if 'fs)
(define-inline (runs:runrec-top-path    vec)(vector-ref vec 11)) ;; *toppath*
(define-inline (runs:runrec-run_id      vec)(vector-ref vec 12)) ;; run-id

(define-inline (test:get-id vec)       (vector-ref vec 0))
(define-inline (test:get-run_id vec)   (vector-ref vec 1))
(define-inline (test:get-test-name vec)(vector-ref vec 2))
(define-inline (test:get-state vec)    (vector-ref vec 3))
(define-inline (test:get-status vec)   (vector-ref vec 4))
(define-inline (test:get-item-path vec)(vector-ref vec 5))

;;======================================================================
;; read a config file, loading only the section pertinent
;; to this run field1val/field2val/field3val ...
;;======================================================================

(use format directory-utils)

(declare (unit runconfig))
(declare (uses common))

(include "common_records.scm")




(define (setup-env-defaults fname run-id already-seen keyvals #!key (environ-patt #f)(change-env #t))
  (let* ((keys    (map car keyvals))

	 (thekey  (if keyvals (string-intersperse (map (lambda (x)(if x x "-na-")) (map cadr keyvals)) "/")

		      (or (args:get-arg "-reqtarg") 
			  (args:get-arg "-target")
			  (get-environment-variable "MT_TARGET")
			  (begin
			    (debug:print 0 "ERROR: setup-env-defaults called with no run-id or -target or -reqtarg")
			    "nothing matches this I hope"))))
	 ;; Why was system disallowed in the reading of the runconfigs file?
	 ;; NOTE: Should be setting env vars based on (target|default)
	 (confdat (read-config fname #f #t environ-patt: environ-patt sections: (list "default" thekey)))
	 (whatfound (make-hash-table))
	 (finaldat  (make-hash-table))
	 (sections (list "default" thekey)))
    (if (not *target*)(set! *target* thekey)) ;; may save a db access or two but repeats db:get-target code
    (debug:print 4 "Using key=\"" thekey "\"")

    (if change-env
	(for-each ;; NB// This can be simplified with new content of keyvals having all that is needed.
	 (lambda (keyval)
	   (setenv (car keyval)(cadr keyval)))
	 keyvals))
	
    (for-each 
     (lambda (section)
       (let ((section-dat (hash-table-ref/default confdat section #f)))
	 (if section-dat
	     (for-each 
	      (lambda (envvar)

	  (for-each (lambda (fullkey)
		      (debug:print 2 (format #f "~20a ~a\n" fullkey (hash-table-ref/default whatfound fullkey 0))))
		    sections)
	  (debug:print 2 "---")
	  (set! *already-seen-runconfig-info* #t)))
    finaldat))

(define (set-run-config-vars run-id keyvals targ-from-db)
  (push-directory *toppath*) ;; the push/pop doesn't appear to do anything ...
  (let ((runconfigf (conc  *toppath* "/runconfigs.config"))
	(targ       (or (args:get-arg "-target")
			(args:get-arg "-reqtarg")
			targ-from-db
			(get-environment-variable "MT_TARGET"))))
    (pop-directory)
    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id #t keyvals
			    environ-patt: (conc "(default"
						(if targ
						    (conc "|" targ ")")
						    ")")))
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))))
 

;; runs:get-runs-by-patt
;; get runs by list of criteria
;; register a test run with the db
;;
;; Use: (db-get-value-by-header (db:get-header runinfo)(db:get-row runinfo))
;;  to extract info from the structure returned
;;
(define (runs:get-runs-by-patt db keys runnamepatt targpatt) ;; test-name)

  (let* ((tmp      (runs:get-std-run-fields keys '("id" "runname" "state" "status" "owner" "event_time")))
	 (keystr   (car tmp))
	 (header   (cadr tmp))
	 (res     '())
	 (key-patt "")
	 (runwildtype (if (substring-index "%" runnamepatt) "like" "glob"))
	 (qry-str  #f)
	 (keyvals  (keys:target->keyval keys targpatt)))
    (for-each (lambda (keyval)
		(let* ((key    (car keyval))
		       (patt   (cadr keyval))
		       (fulkey (conc ":" key))

		       (wildtype (if (substring-index "%" patt) "like" "glob")))
		  (if patt
		      (set! key-patt (conc key-patt " AND " key " " wildtype " '" patt "'"))
		      (begin
			(debug:print 0 "ERROR: searching for runs with no pattern set for " fulkey)
			(exit 6)))))
	      keyvals)
    (set! qry-str (conc "SELECT " keystr " FROM runs WHERE runname " runwildtype " ? " key-patt ";"))
    (debug:print-info 4 "runs:get-runs-by-patt qry=" qry-str " " runnamepatt)
    (sqlite3:for-each-row 
     (lambda (a . r)
       (set! res (cons (list->vector (cons a r)) res)))
     db 
     qry-str
     runnamepatt)
    (vector header res)))

(define (runs:test-get-full-path test)
  (let* ((testname (db:test-get-testname   test))
	 (itempath (db:test-get-item-path test)))
    (conc testname (if (equal? itempath "") "" (conc "(" itempath ")")))))

;; This is the *new* methodology. One record to inform them and in the chaos, organise them.
;;
(define (runs:create-run-record)
  (let* ((mconfig      (if *configdat*
		           *configdat*
		           (if (setup-for-run)
		               *configdat*
		               (begin
		                 (debug:print 0 "ERROR: Called setup in a non-megatest area, exiting")
		                 (exit 1)))))
	  (runrec      (runs:runrec-make-record))
	  (target      (or (args:get-arg "-reqtarg")
		           (args:get-arg "-target")))
	  (runname     (or (args:get-arg ":runname")
		           (args:get-arg "-runname")))
	  (testpatt    (or (args:get-arg "-testpatt")
		           (args:get-arg "-runtests")))
	  (keys        (keys:config-get-fields mconfig))
	  (keyvals     (keys:target->keyval keys target))
	  (toppath     *toppath*)
	  (envdat      keyvals) ;; initial values start with keyvals
	  (runconfig   #f)
	  (serverdat   (if (args:get-arg "-server")
			   *runremote*
			   #f)) ;; to be used later
	  (transport   (or (args:get-arg "-transport") 'http))
	  (db          (if (and mconfig
				(or (args:get-arg "-server")
				    (eq? transport 'fs)))
			   (open-db)
			   #f))
	  (run-id      #f))
    ;; Set all the environment vars we know so far, start with keys
    (for-each (lambda (keyval)
		(setenv (car keyval)(cadr keyval)))
	      keyvals)
    ;; Set up various and sundry known vars here
    (setenv "MT_RUN_AREA_HOME" toppath)
    (setenv "MT_RUNNAME" runname)
    (setenv "MT_TARGET"  target)
    (set! envdat (append 
		  envdat
		  (list (list "MT_RUN_AREA_HOME" toppath)
			(list "MT_RUNNAME"       runname)
			(list "MT_TARGET"        target))))
    ;; Now can read the runconfigs file
    ;; 
    (set! runconfig (read-config (conc  *toppath* "/runconfigs.config") #f #t sections: (list "default" target)))
    (if (not (hash-table-ref/default runconfig (args:get-arg "-reqtarg") #f))
	(begin
	  (debug:print 0 "ERROR: [" (args:get-arg "-reqtarg") "] not found in " runconfigf)
	  (if db (sqlite3:finalize! db))
	  (exit 1)))
    ;; Now have runconfigs data loaded, set environment vars
    (for-each (lambda (section)
		(for-each (lambda (varval)
			    (set! envdat (append envdat (list varval)))
			    (setenv (car varval)(cadr varval)))
			  (configf:get-section runconfig section)))
	      (list "default" target))
    (vector target runname testpatt keys keyvals envdat mconfig runconfig serverdat transport db toppath run-id)))

	 
(define (set-megatest-env-vars run-id #!key (inkeys #f)(inrunname #f)(inkeyvals #f))
  (let* ((target      (or (args:get-arg "-reqtarg")
			  (args:get-arg "-target")
			  (get-environment-variable "MT_TARGET")))
	 (keys    (if inkeys    inkeys    (cdb:remote-run db:get-keys #f)))
	 (keyvals (if inkeyvals inkeyvals (keys:target->keyval keys target)))
	 (vals (hash-table-ref/default *env-vars-by-run-id* run-id #f)))
    ;; get the info from the db and put it in the cache
    (if (not vals)
	(let ((ht (make-hash-table)))
	  (hash-table-set! *env-vars-by-run-id* run-id ht)
	  (set! vals ht)
	  (for-each
	   (lambda (key)
	     (hash-table-set! vals (car key) (cadr key))) ;; (cdb:remote-run db:get-run-key-val #f run-id (car key))))
	   keyvals)))
    ;; from the cached data set the vars
    (hash-table-for-each
     vals
     (lambda (key val)
       (debug:print 2 "setenv " key " " val)
       (setenv key val)))
    (alist->env-vars (hash-table-ref/default *configdat* "env-override" '()))
    ;; Lets use this as an opportunity to put MT_RUNNAME in the environment
    (setenv "MT_RUNNAME" (if inrunname inrunname (cdb:remote-run db:get-run-name-from-id #f run-id)))
    (setenv "MT_RUN_AREA_HOME" *toppath*)))


(define (set-item-env-vars itemdat)
  (for-each (lambda (item)
	      (debug:print 2 "setenv " (car item) " " (cadr item))
	      (setenv (car item) (cadr item)))
	    itemdat))



;; Every time can-run-more-tests is called increment the delay
;;
;; NOTE: We run this server-side!! Do not use this global except in the runs:can-run-more-tests routine
;;
(define *last-num-running-tests* 0)
(define *runs:can-run-more-tests-count* 0)
(define (runs:shrink-can-run-more-tests-count db) ;; the db is just so we can use cdb:remote-run
  (set! *runs:can-run-more-tests-count* 0)) ;; (/ *runs:can-run-more-tests-count* 2)))

(define (runs:can-run-more-tests db jobgroup max-concurrent-jobs)
  (thread-sleep! (cond
		  ((> *runs:can-run-more-tests-count* 20) 2);; obviously haven't had any work to do for a while
		  (else 0)))


  (let* ((num-running             (db:get-count-tests-running db))
	 (num-running-in-jobgroup (db:get-count-tests-running-in-jobgroup db jobgroup))
	 (job-group-limit         (config-lookup *configdat* "jobgroups" jobgroup)))
    (if (> (+ num-running num-running-in-jobgroup) 0)
	(set! *runs:can-run-more-tests-count* (+ *runs:can-run-more-tests-count* 1)))
    (if (not (eq? *last-num-running-tests* num-running))
	(begin
	  (debug:print 2 "max-concurrent-jobs: " max-concurrent-jobs ", num-running: " num-running)
	  (set! *last-num-running-tests* num-running)))

;; This is a duplicate of run-tests (which has been deprecated). Use this one instead of run tests.
;; keyvals.
;;
;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.
;;              FIXME: error out if /patt specified
;;            
(define (runs:run-tests target runname test-patts user flags) ;; test-names
  (common:clear-caches) ;; clear all caches
  (let* ((db          #f)
	 (keys        (keys:config-get-fields *configdat*))
	 (keyvals     (keys:target->keyval keys target))
	 (run-id      (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))  ;;  test-name)))

	 (deferred    '()) ;; delay running these since they have a waiton clause
	 ;; keepgoing is the defacto modality now, will add hit-n-run a bit later
	 ;; (keepgoing   (hash-table-ref/default flags "-keepgoing" #f))
	 (runconfigf   (conc  *toppath* "/runconfigs.config"))
	 (required-tests '())
	 (test-records (make-hash-table))
	 (all-test-names (tests:get-valid-tests *toppath* "%"))) ;; we need a list of all valid tests to check waiton names

    (set-megatest-env-vars run-id inkeys: keys) ;; these may be needed by the launching process

    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals "pre-launch-env-vars")
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))
    
    ;; look up all tests matching the comma separated list of globs in
    ;; test-patts (using % as wildcard)

    (set! test-names (tests:get-valid-tests *toppath* test-patts))
    (set! test-names (delete-duplicates test-names))

    (debug:print-info 0 "test names " test-names)

    ;; on the first pass or call to run-tests set FAILS to NOT_STARTED if
    ;; -keepgoing is specified
    (if (eq? *passnum* 0)

    ;; from here on out the db will be opened and closed on every call runs:run-tests-queue
    ;; (sqlite3:finalize! db) 
    ;; now add non-directly referenced dependencies (i.e. waiton)
    (if (not (null? test-names))
	(let loop ((hed (car test-names))
		   (tal (cdr test-names)))         ;; 'return-procs tells the config reader to prep running system but return a proc

	  (let* ((config  (tests:get-testconfig hed 'return-procs))
		 (waitons (let ((instr (if config 
					   (config-lookup config "requirements" "waiton")
					   (begin ;; No config means this is a non-existant test
					     (debug:print 0 "ERROR: non-existent required test \"" hed "\"")
					     (if db (sqlite3:finalize! db))
					     (exit 1)))))

							   (let ((val (car x)))
							     (if (procedure? val) val #f)))
							 (append (if (list? items) items '())
								 (if (list? itemstable) itemstable '())))
						 'have-procedure)
						((or (list? items)(list? itemstable)) ;; calc now
						 (debug:print-info 4 "items and itemstable are lists, calc now\n"
								   "    items: " items " itemstable: " itemstable)
						 (items:get-items-from-config config))
						(else #f)))                           ;; not iterated
					     #f      ;; itemsdat 5
					     #f      ;; spare - used for item-path
					     )))
	    (for-each 
	     (lambda (waiton)

    (if (not (null? required-tests))
	(debug:print-info 1 "Adding " required-tests " to the run queue"))
    ;; NOTE: these are all parent tests, items are not expanded yet.
    (debug:print-info 4 "test-records=" (hash-table->alist test-records))
    (let ((reglen (any->number  (configf:lookup *configdat* "setup" "runqueue"))))
      (if reglen
	  (runs:run-tests-queue-new     run-id runname test-records keyvals flags test-patts required-tests reglen)
	  (runs:run-tests-queue-classic run-id runname test-records keyvals flags test-patts required-tests)))
    (debug:print-info 4 "All done by here")))

(define (runs:calc-fails prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (equal? (db:test-get-state test) "COMPLETED")
		 (not (member (db:test-get-status test)

	  '()
	  reg)))

(include "run-tests-queue-classic.scm")
(include "run-tests-queue-new.scm")

;; parent-test is there as a placeholder for when parent-tests can be run as a setup step
(define (run:test run-id run-info keyvals runname test-record flags parent-test)
  ;; All these vars might be referenced by the testconfig file reader
  (let* ((test-name    (tests:testqueue-get-testname   test-record))
	 (test-waitons (tests:testqueue-get-waitons    test-record))
	 (test-conf    (tests:testqueue-get-testconfig test-record))
	 (itemdat      (tests:testqueue-get-itemdat    test-record))
	 (test-path    (conc *toppath* "/tests/" test-name)) ;; could use tests:get-testconfig here ...
	 (force        (hash-table-ref/default flags "-force" #f))

	    ;; NOPE: Cannot! Don't know yet which disk area will be assigned....
	    ;; (system (conc "mkdir -p " new-test-path))
	    ;;
	    ;; (open-run-close tests:register-test db run-id test-name item-path)
	    ;;
	    ;; NB// for the above line. I want the test to be registered long before this routine gets called!
	    ;;
	    (set! test-id (cdb:remote-run db:get-test-id #f run-id test-name item-path))
	    (if (not test-id)
		(begin
		  (debug:print 2 "WARN: Test not pre-created? test-name=" test-name ", item-path=" item-path ", run-id=" run-id)
		  (cdb:tests-register-test *runremote* run-id test-name item-path)
		  (set! test-id (cdb:remote-run db:get-test-id #f run-id test-name item-path))))
	    (debug:print-info 4 "test-id=" test-id ", run-id=" run-id ", test-name=" test-name ", item-path=\"" item-path "\"")
	    (set! testdat (cdb:get-test-info-by-id *runremote* test-id))))
      (if (not testdat) ;; should NOT happen
	  (debug:print 0 "ERROR: failed to get test record for test-id " test-id))
      (set! test-id (db:test-get-id testdat))
      (change-directory test-path)
      (case (if force ;; (args:get-arg "-force")
		'NOT_STARTED
		(if testdat
		    (string->symbol (test:get-state testdat))
		    'failed-to-insert))

	       (if (not parent-test)
		   (debug:print 1 "NOTE: Not starting test " new-test-name " as it is state \"" (test:get-state testdat) 
				"\" and status \"" (test:get-status testdat) "\", use -rerun \"" (test:get-status testdat)
                                "\" or -force to override"))
	       ;; NOTE: No longer be checking prerequisites here! Will never get here unless prereqs are
	       ;;       already met.
	       ;; This would be a great place to do the process-fork
	       (if (not (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat flags))
		   (begin
		     (print "ERROR: Failed to launch the test. Exiting as soon as possible")
		     (set! *globalexitstatus* 1) ;; 
		     (process-signal (current-process-id) signal/kill))))))
	((KILLED) 
	 (debug:print 1 "NOTE: " new-test-name " is already running or was explictly killed, use -force to launch it."))
	((LAUNCHED REMOTEHOSTSTART RUNNING)  

;; fields are passing in through 
;; action:
;;    'remove-runs
;;    'set-state-status
;;
;; NB// should pass in keys?
;;
(define (runs:operate-on action target runnamepatt testpatt #!key (state #f)(status #f)(new-state-status #f))
  (common:clear-caches) ;; clear all caches
  (let* ((db           #f)
	 (keys         (cdb:remote-run db:get-keys db))
	 (rundat       (cdb:remote-run runs:get-runs-by-patt db keys runnamepatt target))
	 (header       (vector-ref rundat 0))
	 (runs         (vector-ref rundat 1))
	 (states       (if state  (string-split state  ",") '()))
	 (statuses     (if status (string-split status ",") '()))
	 (state-status (if (string? new-state-status) (string-split new-state-status ",") '(#f #f))))
    (debug:print-info 4 "runs:operate-on => Header: " header " action: " action " new-state-status: " new-state-status)
    (if (> 2 (length state-status))
	(begin
	  (debug:print 0 "ERROR: the parameter to -set-state-status is a comma delimited string. E.g. COMPLETED,FAIL")
	  (exit)))
    (for-each
     (lambda (run)
       (let ((runkey (string-intersperse (map (lambda (k)
						(db:get-value-by-header run header k)) keys) "/"))
	     (dirs-to-remove (make-hash-table))
	     (proc-get-tests (lambda (run-id)
			       (cdb:remote-run db:get-tests-for-run db run-id
					       testpatt states statuses
					       not-in:  #f
					       sort-by: (case action
							  ((remove-runs) 'rundir)
							  (else          'event_time))))))
	 (let* ((run-id    (db:get-value-by-header run header "id"))
		(run-state (db:get-value-by-header run header "state"))
		(tests     (if (not (equal? run-state "locked"))
			       (proc-get-tests run-id)





			       '()))
		(lasttpath "/does/not/exist/I/hope"))
	   (debug:print-info 4 "runs:operate-on run=" run ", header=" header)
	   (if (not (null? tests))
	       (begin
		 (case action
		   ((remove-runs)
		    (debug:print 1 "Removing tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((set-state-status)
		    (debug:print 1 "Modifying state and staus for tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((print-run)
		    (debug:print 1 "Printing info for run " runkey ", run=" run ", tests=" tests ", header=" header)
		    action)
		   ((run-wait)
		    (debug:print 1 "Waiting for run " runkey ", run=" runnamepatt " to complete"))
		   (else
		    (debug:print-info 0 "action not recognised " action)))
		 (let ((sorted-tests     (sort tests (lambda (a b)(let ((dira (db:test-get-rundir a))
									(dirb (db:test-get-rundir b)))
								    (if (and (string? dira)(string? dirb))
									(> (string-length dira)(string-length dirb))
									#f)))))
		       (test-retry-time  (make-hash-table))
		       (allow-run-time   10)) ;; seconds to allow for killing tests before just brutally killing 'em
		   (let loop ((test (car sorted-tests))
			      (tal  (cdr sorted-tests)))
		     (let* ((test-id       (db:test-get-id test))
			    (new-test-dat  (cdb:remote-run db:get-test-info-by-id #f test-id))
			    (item-path     (db:test-get-item-path new-test-dat))
			    (test-name     (db:test-get-testname new-test-dat))
			    (run-dir       (db:test-get-rundir new-test-dat))    ;; run dir is from the link tree
			    (real-dir      (if (file-exists? run-dir)
					       (resolve-pathname run-dir)
					       #f))
			    (test-state    (db:test-get-state new-test-dat))
			    (test-fulln    (db:test-get-fullname new-test-dat)))

			   (case action
			     ((remove-runs)
			      (debug:print-info 0 "test: " test-name " itest-state: " test-state)
			      (if (member test-state (list "RUNNING" "LAUNCHED" "REMOTEHOSTSTART" "KILLREQ"))
				  (begin
				    (if (not (hash-table-ref/default test-retry-time test-fulln #f))
					(hash-table-set! test-retry-time test-fulln (current-seconds)))
				    (if (> (- (current-seconds)(hash-table-ref test-retry-time test-fulln)) allow-run-time)
				      ;; This test is not in a correct state for cleaning up. Let's try some graceful shutdown steps first
				      ;; Set the test to "KILLREQ" and wait five seconds then try again. Repeat up to five times then give
				      ;; up and blow it away.
				      (begin
					(debug:print 0 "WARNING: could not gracefully remove test " test-fulln ", tried to kill it to no avail. Forcing state to FAILEDKILL and continuing")
					(cdb:remote-run db:test-set-state-status-by-id db (db:test-get-id test) "FAILEDKILL" "n/a" #f)
					(thread-sleep! 1))
				      (begin
					(cdb:remote-run db:test-set-state-status-by-id db (db:test-get-id test) "KILLREQ" "n/a" #f)
					(thread-sleep! 1)))
				    ;; NOTE: This is suboptimal as the testdata will be used later and the state/status may have changed ...
				    (if (null? tal)
					(loop new-test-dat tal)
					(loop (car tal)(append tal (list new-test-dat)))))
				  (begin
				    (cdb:remote-run db:delete-test-records db #f (db:test-get-id test))
				    (debug:print-info 1 "Attempting to remove " (if real-dir (conc " dir " real-dir " and ") "") " link " run-dir)
				    (if (and real-dir 
					     (> (string-length real-dir) 5)
					     (file-exists? real-dir)) ;; bad heuristic but should prevent /tmp /home etc.
					(begin ;; let* ((realpath (resolve-pathname run-dir)))
					  (debug:print-info 1 "Recursively removing " real-dir)
					  (if (file-exists? real-dir)
					      (if (> (system (conc "rm -rf " real-dir)) 0)
						  (debug:print 0 "ERROR: There was a problem removing " real-dir " with rm -f"))
					      (debug:print 0 "WARNING: test dir " real-dir " appears to not exist or is not readable")))
					(if real-dir 
					    (debug:print 0 "WARNING: directory " real-dir " does not exist")
					    (debug:print 0 "WARNING: no real directory corrosponding to link " run-dir ", nothing done")))
				    (if (symbolic-link? run-dir)
					(begin
					  (debug:print-info 1 "Removing symlink " run-dir)
					  (handle-exceptions
					   exn
					   (debug:print 0 "ERROR:  Failed to remove symlink " run-dir ((condition-property-accessor 'exn 'message) exn) ", attempting to continue")
					   (delete-file run-dir)))
					(if (directory? run-dir)
					    (if (> (directory-fold (lambda (f x)(+ 1 x)) 0 run-dir) 0)
						(debug:print 0 "WARNING: refusing to remove " run-dir " as it is not empty")
						(handle-exceptions
						 exn
						 (debug:print 0 "ERROR:  Failed to remove directory " run-dir ((condition-property-accessor 'exn 'message) exn) ", attempting to continue")
						 (delete-directory run-dir)))
					    (if run-dir
						(debug:print 0 "WARNING: not removing " run-dir " as it either doesn't exist or is not a symlink")
						(debug:print 0 "NOTE: the run dir for this test is undefined. Test may have already been deleted."))
					    ))
				    (if (not (null? tal))
					(loop (car tal)(cdr tal))))))
			     ((set-state-status)
			      (debug:print-info 2 "new state " (car state-status) ", new status " (cadr state-status))
			      (cdb:remote-run db:test-set-state-status-by-id db (db:test-get-id test) (car state-status)(cadr state-status) #f))

			     ((run-wait)
			      (debug:print-info 2 "still waiting, " (length tests) " tests still running")
			      (thread-sleep! 10)
			      (let ((new-tests (proc-get-tests run-id)))
				(if (null? new-tests)

				    (debug:print-info 1 "Run completed according to zero tests matching provided criteria.")
				    (loop (car new-tests)(cdr new-tests))))))))
		   )))
	   ;; remove the run if zero tests remain
	   (if (eq? action 'remove-runs)
	       (let ((remtests (cdb:remote-run db:get-tests-for-run db (db:get-value-by-header run header "id") #f '("DELETED") '("n/a") not-in: #t)))
		 (if (null? remtests) ;; no more tests remaining
		     (let* ((dparts  (string-split lasttpath "/"))
			    (runpath (conc "/" (string-intersperse 
						(take dparts (- (length dparts) 1))
						"/"))))
		       (debug:print 1 "Removing run: " runkey " " (db:get-value-by-header run header "runname") " and related record")
		       (cdb:remote-run db:delete-run db run-id)
		       ;; This is a pretty good place to purge old DELETED tests
		       (cdb:remote-run db:delete-tests-for-run db run-id)
		       (cdb:remote-run db:delete-old-deleted-test-records db)
		       (cdb:remote-run db:set-var db "DELETED_TESTS" (current-seconds))
		       ;; need to figure out the path to the run dir and remove it if empty
		       ;;    (if (null? (glob (conc runpath "/*")))
		       ;;        (begin
		       ;; 	 (debug:print 1 "Removing run dir " runpath)
		       ;; 	 (system (conc "rmdir -p " runpath))))
		       )))))
	 ))
     runs))
  #t)

;;======================================================================
;; Routines for manipulating runs
;;======================================================================

;; Since many calls to a run require pretty much the same setup 
;; this wrapper is used to reduce the replication of code
(define (general-run-call switchname action-desc proc)
  (let ((runname (args:get-arg ":runname"))
	(target  (if (args:get-arg "-target")
		     (args:get-arg "-target")
		     (args:get-arg "-reqtarg"))))
	;; (th1     #f))
    (cond
     ((not target)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the target with -target")
      (exit 3))
     ((not runname)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the run name with :runname runname")
      (exit 3))
     (else
      (let ((db   #f)
	    (keys #f)
	    (target (or (args:get-arg "-reqtarg")
			(args:get-arg "-target"))))
	(if (not (setup-for-run))
	    (begin 
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	;; (if (args:get-arg "-server")
	;;     (cdb:remote-run server:start db (args:get-arg "-server")))




	(set! keys (keys:config-get-fields *configdat*))
	;; have enough to process -target or -reqtarg here
	(if (args:get-arg "-reqtarg")
	    (let* ((runconfigf (conc  *toppath* "/runconfigs.config")) ;; DO NOT EVALUATE ALL 
		   (runconfig  (read-config runconfigf #f #t environ-patt: #f)))
	      (if (hash-table-ref/default runconfig (args:get-arg "-reqtarg") #f)
		  (keys:target-set-args keys (args:get-arg "-reqtarg") args:arg-hash)
		    
		  (begin
		    (debug:print 0 "ERROR: [" (args:get-arg "-reqtarg") "] not found in " runconfigf)
		    (if db (sqlite3:finalize! db))
		    (exit 1))))
	    (if (args:get-arg "-target")
		(keys:target-set-args keys (args:get-arg "-target" args:arg-hash) args:arg-hash)))
	(if (not (car *configinfo*))
	    (begin
	      (debug:print 0 "ERROR: Attempted to " action-desc " but run area config file not found")
	      (exit 1))
	    ;; Extract out stuff needed in most or many calls
	    ;; here then call proc
	    (let* ((keyvals    (keys:target->keyval keys target)))

	      (proc target runname keys keyvals)))

	(if db (sqlite3:finalize! db))
	(set! *didsomething* #t))))))

;;======================================================================
;; Lock/unlock runs
;;======================================================================

(define (runs:handle-locking target keys runname lock unlock user)
  (let* ((db       #f)
	 (rundat   (cdb:remote-run runs:get-runs-by-patt db keys runname target))
	 (header   (vector-ref rundat 0))
	 (runs     (vector-ref rundat 1)))
    (for-each (lambda (run)
		(let ((run-id (db:get-value-by-header run header "id")))
		  (if (or lock
			  (and unlock
			       (begin
				 (print "Do you really wish to unlock run " run-id "?\n   y/n: ")
				 (equal? "y" (read-line)))))
		      (cdb:remote-run db:lock/unlock-run db run-id lock unlock user)
		      (debug:print-info 0 "Skipping lock/unlock on " run-id))))
	      runs)))
;;======================================================================
;; Rollup runs
;;======================================================================

;; Update the test_meta table for this test

    (for-each 
     (lambda (test-name)
       (let* ((test-path    (conc *toppath* "/tests/" test-name))
	      (test-configf (conc test-path "/testconfig"))
	      (testexists   (and (file-exists? test-configf)(file-read-access? test-configf)))
	      ;; read configs with tricks turned off (i.e. no system)
	      (test-conf    (if testexists (read-config test-configf #f #f)(make-hash-table))))
	 ;; use the cdb:remote-run instead of passing in db
	 (runs:update-test_meta test-name test-conf)))
     test-names)))

;; This could probably be refactored into one complex query ...
(define (runs:rollup-run keys runname user keyvals)
  (debug:print 4 "runs:rollup-run, keys: " keys " :runname " runname " user: " user)
  (let* ((db              #f)
	 (new-run-id      (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))
	 (prev-tests      (cdb:remote-run test:get-matching-previous-test-run-records db new-run-id "%" "%"))
	 (curr-tests      (cdb:remote-run db:get-tests-for-run db new-run-id "%/%" '() '()))
	 (curr-tests-hash (make-hash-table)))
    (cdb:remote-run db:update-run-event_time db new-run-id)
    ;; index the already saved tests by testname and itemdat in curr-tests-hash
    (for-each
     (lambda (testdat)
       (let* ((testname  (db:test-get-testname testdat))
	      (item-path (db:test-get-item-path testdat))
	      (full-name (conc testname "/" item-path)))
	 (hash-table-set! curr-tests-hash full-name testdat)))
     curr-tests)
    ;; NOPE: Non-optimal approach. Try this instead.
    ;;   1. tests are received in a list, most recent first
    ;;   2. replace the rollup test with the new *always*
    (for-each 
     (lambda (testdat)
       (let* ((testname  (db:test-get-testname testdat))
	      (item-path (db:test-get-item-path testdat))
	      (full-name (conc testname "/" item-path))
	      (prev-test-dat (hash-table-ref/default curr-tests-hash full-name #f))
	      (test-steps    (cdb:remote-run db:get-steps-for-test db (db:test-get-id testdat)))
	      (new-test-record #f))
	 ;; replace these with insert ... select
	 (apply sqlite3:execute 
		db 
		(conc "INSERT OR REPLACE INTO tests (run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment) "
		      "VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?);")
		new-run-id (cddr (vector->list testdat)))
	 (set! new-testdat (car (cdb:remote-run db:get-tests-for-run db new-run-id (conc testname "/" item-path) '() '())))
	 (hash-table-set! curr-tests-hash full-name new-testdat) ;; this could be confusing, which record should go into the lookup table?
	 ;; Now duplicate the test steps
	 (debug:print 4 "Copying records in test_steps from test_id=" (db:test-get-id testdat) " to " (db:test-get-id new-testdat))
	 (cdb:remote-run 
	  (lambda ()
	    (sqlite3:execute 
	     db 
	     (conc "INSERT OR REPLACE INTO test_steps (test_id,stepname,state,status,event_time,comment) "
		   "SELECT " (db:test-get-id new-testdat) ",stepname,state,status,event_time,comment FROM test_steps WHERE test_id=?;")
	     (db:test-get-id testdat))
	    ;; Now duplicate the test data

   interface
   port
   pubport
   transport
   ))

;; NB// two servers with same pid on different hosts will be removed from the list if pid: is used!
(define (tasks:server-deregister mdb hostname #!key (port #f)(pid #f)(action 'delete))
  (debug:print-info 11 "server-deregister " hostname ", port " port ", pid " pid)
  (if *db-write-access*
      (if pid
	  (case action
	    ((delete)(sqlite3:execute mdb "DELETE FROM servers WHERE pid=?;" pid))
	    (else    (sqlite3:execute mdb "UPDATE servers SET state='dead' WHERE pid=?;" pid)))
	  (if port
	      (case action
	    ((delete)(sqlite3:execute mdb "DELETE FROM servers WHERE (interface=? or hostname=?) AND port=?;" hostname hostname port))
	    (else    (sqlite3:execute mdb "UPDATE servers SET state='dead' WHERE (interface=? or hostname=?) AND port=?;" hostname hostname port)))
	      (debug:print 0 "ERROR: tasks:server-deregister called with neither pid nor port specified")))))

(define (tasks:server-deregister-self mdb hostname)
  (tasks:server-deregister mdb hostname pid: (current-process-id)))

;; need a simple call for robustly removing records given host and port
(define (tasks:server-delete mdb hostname port)

       (begin
	 (debug:print 0 "ERROR: tasks:server-get-server-id needs (hostname and pid) OR (iface and port) OR (hostname and port)")
	 "SELECT id FROM servers WHERE pid=-999;")))
     (if hostname hostname iface)(if pid pid port))
    res))

(define (tasks:server-update-heartbeat mdb server-id)
  (debug:print-info 1 "Heart beat update of server id=" server-id)
  (handle-exceptions
   exn
   (begin
     (debug:print 0 "WARNING: probable timeout on monitor.db access")
     (thread-sleep! 1)
     (tasks:server-update-heartbeat mdb server-id))
   (sqlite3:execute mdb "UPDATE servers SET heartbeat=strftime('%s','now') WHERE id=?;" server-id)))

			       "  EXCEPTION: " ((condition-property-accessor 'exn 'message) exn))
	     (debug:print 1 "Sending signal/term to " pid " on " hostname)
	     (process-signal pid signal/term)
	     (thread-sleep! 5) ;; give it five seconds to die peacefully then do a brutal kill
	     ;;(process-signal pid signal/kill)
	     ) ;; local machine, send sig term
	    (begin
	      ;;(debug:print-info 1 "Stopping remote servers not yet supported."))))
	      (debug:print-info 1 "Telling alive server on " hostname ":" port " to commit servercide")
	      (let ((serverdat (list hostname port)))
	      	(case (if (string? transport) (string->symbol transport) transport)
	      	  ((http)(http-transport:client-connect hostname port))
	      	  (else  (debug:print "ERROR: remote stopping servers of type " transport " not supported yet")))
	      	(cdb:kill-server serverdat pid)))))    ;; remote machine, try telling server to commit suicide
      (begin
	(if status 
	    (if (equal? hostname (get-host-name))
		(begin
		  (debug:print-info 1 "Sending signal/term to " pid " on " hostname)
		  (process-signal pid signal/term)  ;; local machine, send sig term
		  (thread-sleep! 5)                 ;; give it five seconds to die peacefully then do a brutal kill

		    (tasks:task-get-owner  task)
		    flags)
    (tasks:set-state mdb (tasks:task-get-id task) "waiting")))

(define (tasks:rollup-runs db mdb task)
  (let* ((flags (make-hash-table)) 
	 (keys  (db:get-keys db))
	 (keyvals (keys:target-keyval keys (tasks:task-get-target task))))
    ;; (hash-table-set! flags "-rerun" "NOT_STARTED")
    (print "Starting rollup " task)
    ;; sillyness, just call the damn routine with the task vector and be done with it. FIXME SOMEDAY
    (runs:rollup-run db
		     keys 
		     keyvals
		     (tasks:task-get-name  task)
		     (tasks:task-get-owner  task))
    (tasks:set-state mdb (tasks:task-get-id task) "waiting")))

		(if (null? tal)
		    (string-intersperse (append (reverse res)(list qry)) " OR ")
		    (loop (car tal)(cdr tal)(cons qry res)))))))
      #f))

;; get the previous record for when this test was run where all keys match but runname
;; returns #f if no such test found, returns a single test record if found
;; 
;; Run this server-side
;;
(define (test:get-previous-test-run-record db run-id test-name item-path)
  (let* ((keys    (db:get-keys db))
	 (selstr  (string-intersperse  keys ","))
	 (qrystr  (string-intersperse (map (lambda (x)(conc x "=?")) keys) " AND "))
	 (keyvals #f))
    ;; first look up the key values from the run selected by run-id
    (sqlite3:for-each-row 
     (lambda (a . b)
       (set! keyvals (cons a b)))
     db
     (conc "SELECT " selstr " FROM runs WHERE id=? ORDER BY event_time DESC;") run-id)

		 (conc "SELECT id FROM runs WHERE " qrystr " AND id != ?;") (append keyvals (list run-id)))
	  ;; for each run starting with the most recent look to see if there is a matching test
	  ;; if found then return that matching test record
	  (debug:print 4 "selstr: " selstr ", qrystr: " qrystr ", keyvals: " keyvals ", previous run ids found: " prev-run-ids)
	  (if (null? prev-run-ids) #f
	      (let loop ((hed (car prev-run-ids))
			 (tal (cdr prev-run-ids)))
		(let ((results (db:get-tests-for-run db hed (conc test-name "/" item-path)'() '())))
		  (debug:print 4 "Got tests for run-id " run-id ", test-name " test-name ", item-path " item-path ": " results)
		  (if (and (null? results)
			   (not (null? tal)))
		      (loop (car tal)(cdr tal))
		      (if (null? results) #f
			  (car results))))))))))
    

	 ;; was WAIVED if this test is FAIL

	 ;; NOTES:
	 ;;  1. Is the call to test:get-previous-run-record remotified?
	 ;;  2. Add test for testconfig waiver propagation control here
	 ;;
	 (prev-test   (if (equal? status "FAIL")
			  (cdb:remote-run test:get-previous-test-run-record #f run-id test-name item-path)
			  #f))
	 (waived   (if prev-test
		       (if prev-test ;; true if we found a previous test in this run series
			   (let ((prev-status  (db:test-get-status  prev-test))
				 (prev-state   (db:test-get-state   prev-test))
				 (prev-comment (db:test-get-comment prev-test)))
			     (debug:print 4 "prev-status " prev-status ", prev-state " prev-state ", prev-comment " prev-comment)

	;; (set! outputfilename (conc path "/" outputfilename)))
	(print "No such path: " path))
    (debug:print 4 "summarize-items with logf " logf ", outputfilename " outputfilename " and force " force)
    (if (or (equal? logf "logs/final.log")
	    (equal? logf outputfilename)
	    force)
	(begin
	  (if Onot (obtain-dot-lock outputfilename 1 5 7)) ;; retry every second for 20 seconds, call it dead after 30 seconds and steal the lock
	      (print "Failed to obtain lock for " outputfilename)
	      (begin
		(print "Obtained lock for " outputfilename)
		(let ((oup    (open-output-file outputfilename))
		      (counts (make-hash-table))
		      (statecounts (make-hash-table))
		      (outtxt "")
		      (tot    0)
		      (testdat (cdb:remote-run db:test-get-records-for-index-file #f run-id test-name)))
		  (with-output-to-port
		      oup
		    (lambda ()
		      (set! outtxt (conc outtxt "<html><title>Summary: " test-name 
					 "</title><body><h2>Summary for " test-name "</h2>"))
		      (for-each
		       (lambda (testrecord)
			 (let ((id             (vector-ref testrecord 0))
			       (itempath       (vector-ref testrecord 1))
			       (state          (vector-ref testrecord 2))
			       (status         (vector-ref testrecord 3))
			       (run_duration   (vector-ref testrecord 4))
			       (logf           (vector-ref testrecord 5))
			       (comment        (vector-ref testrecord 6)))
			   (hash-table-set! counts status (+ 1 (hash-table-ref/default counts status 0)))
			   (hash-table-set! statecounts state (+ 1 (hash-table-ref/default statecounts state 0)))
			   (set! outtxt (conc outtxt "<tr>"
					      "<td><a href=\"" itempath "/" logf "\"> " itempath "</a></td>" 
					      "<td>" state    "</td>" 
					      "<td><font color=" (common:get-color-from-status status)
					      ">"   status   "</font></td>"
					      "<td>" (if (equal? comment "")
							 "&nbsp;"
							 comment) "</td>"
							 "</tr>"))))
		       testdat)
		      (print "<table><tr><td valign=\"top\">")
		      ;; Print out stats for status
		      (set! tot 0)
		      (print "<table cellspacing=\"0\" border=\"1\"><tr><td colspan=\"2\"><h2>State stats</h2></td></tr>")
		      (for-each (lambda (state)
				  (set! tot (+ tot (hash-table-ref statecounts state)))
				  (print "<tr><td>" state "</td><td>" (hash-table-ref statecounts state) "</td></tr>"))
				(hash-table-keys statecounts))
		      (print "<tr><td>Total</td><td>" tot "</td></tr></table>")
		      (print "</td><td valign=\"top\">")
		      ;; Print out stats for state
		      (set! tot 0)
		      (print "<table cellspacing=\"0\" border=\"1\"><tr><td colspan=\"2\"><h2>Status stats</h2></td></tr>")
		      (for-each (lambda (status)
				  (set! tot (+ tot (hash-table-ref counts status)))
				  (print "<tr><td><font color=\"" (common:get-color-from-status status) "\">" status
					 "</font></td><td>" (hash-table-ref counts status) "</td></tr>"))
				(hash-table-keys counts))
		      (print "<tr><td>Total</td><td>" tot "</td></tr></table>")
		      (print "</td></td></tr></table>")
		      
		      (print "<table cellspacing=\"0\" border=\"1\">" 
			     "<tr><td>Item</td><td>State</td><td>Status</td><td>Comment</td>"
			     outtxt "</table></body></html>")
		      (release-dot-lock outputfilename)))
		  (close-output-port oup)
		  (change-directory orig-dir)
		  ;; NB// tests:test-set-toplog! is remote internal...
		  (tests:test-set-toplog! db run-id test-name outputfilename)
		  ))))))

(define (get-all-legal-tests)
  (let* ((tests  (glob (conc *toppath* "/tests/*")))
	 (res    '()))
    (debug:print-info 4 "Looking at tests " (string-intersperse tests ","))
    (for-each (lambda (testpath)
		(if (file-exists? (conc testpath "/testconfig"))

;;======================================================================
;; test steps
;;======================================================================

;; teststep-set-status! used to be here

(define (test-get-kill-request test-id) ;; run-id test-name itemdat)

  (let* ((testdat   (cdb:get-test-info-by-id *runremote* test-id))) ;; run-id test-name item-path)))
    (and testdat
	 (equal? (test:get-state testdat) "KILLREQ"))))

(define (test:tdb-get-rundat-count tdb)
  (if tdb
      (let ((res 0))
	(sqlite3:for-each-row
	 (lambda (count)
	   (set! res count))

NEWTARGET  = "$(OS)/$(FS)/$(VER)"
TARGET     = "ubuntu/nfs/none"

all : test1 test2 test3 test4 test5

server :
	(cd ..;make;make install) && \
	(cd fullrun;../../bin/megatest -server - -debug 22 &) 

test0 : cleanprep
	cd simplerun ; $(MEGATEST) -server - -debug $(DEBUG)

test1 : cleanprep
	rm -f simplerun/megatest.db
	rm -rf simplelinks/ simpleruns/

	@echo "WARNING: No longer running fullprep, test converage may be lessened"
	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_aa -debug $(DEBUG) $(LOGGING) > aa.log 2> aa.log &
	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ab -debug $(DEBUG) $(LOGGING) > ab.log 2> ab.log &
	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ac -debug $(DEBUG) $(LOGGING) > ac.log 2> ac.log &
	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ad -debug $(DEBUG) $(LOGGING) > ad.log 2> ad.log &	
#	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ae -debug $(DEBUG) $(LOGGING) > ae.log 2> ae.log &	
#	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_af -debug $(DEBUG) $(LOGGING) > af.log 2> af.log &	
	cd fullrun;sleep 10;$(MEGATEST) -run-wait  -target $(TARGET) :runname % -testpatt % :state RUNNING,LAUNCHED;echo ALL DONE

test6: fullprep
	cd fullrun;$(MEGATEST) -runtests runfirst -testpatt %/1 -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_itempatt -v
	cd fullrun;$(MEGATEST) -runtests runfirst -testpatt %blahha% -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_itempatt -debug 10
	cd fullrun;$(MEGATEST) -rollup :runname newrun -target ubuntu/nfs/none -debug 10

test7: 
	@echo Only a/c testname c should remain. If there is a run a/b/c then there is a cache issue.
	(cd simplerun; \
	 $(MEGATEST) -server - -daemonize; \
         $(MEGATEST) -remove-runs -target %/% :runname % -testpatt %; \
         $(MEGATEST) -runtests %  -target a/b :runname c; sleep 5; \
	 $(MEGATEST) -remove-runs -target a/c :runname c; \
	 $(MEGATEST) -runtests %  -target a/c :runname c; \
	 $(MEGATEST) -remove-runs -target a/b :runname c -testpatt % ; \
	 $(MEGATEST) -runtests %  -target a/d :runname c;$(MEGATEST) -list-runs %|egrep ^Run:) > test7.log 2> test7.log 
	logpro test7.logpro test7.html < test7.log
	@echo 
	@echo Run \"firefox test7.html\" to see the results.

cleanprep : ../*.scm Makefile */*.config
	mkdir -p fullrun/tmp/mt_runs fullrun/tmp/mt_links
	cd ..;make;make install
	rm -f */logging.db
	touch cleanprep

TESTSTORUN priority_6 sqlitespeed/ag

# Set launchwait to yes to use the old launch run code that waits for the launch process to return before 
# proceeding.
# launchwait yes

# If defined the runs:run-tests-queue-new queue code is used with the register test depth
# given. Otherwise the old code is used. The old code will be removed in the future and 
# a default of 10 used.
runqueue 2

# It is possible (but not recommended) to override the rsync command used
# to populate the test directories. For test development the following 
# example can be useful
#
# testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log

TESTSTORUN priority_4 test_mt_vars

[default]
SOMEVAR This should show up in SOMEVAR3

# target based getting of config file, look at afs.config and nfs.config
[include #{getenv fsname}.config]

[include #{getenv MT_RUN_AREA_HOME}/common_runconfigs.config]

# #{system echo 'VACKYVAR #{shell pwd}' > $MT_RUN_AREA_HOME/config/$USER.config}
[include ./config/#{getenv USER}.config]


WACKYVAR0 #{get ubuntu/nfs/none CURRENT}
WACKYVAR1 #{scheme (args:get-arg "-target")}

[default/ubuntu/nfs]
WACKYVAR2 #{runconfigs-get CURRENT}

[ezsteps]
# calcresults megatest -list-runs $MT_RUNNAME -target $MT_TARGET

[requirements]
waiton #{rget TESTSTORUN}

# This is a "toplevel" test, it does not require waitons to be non-FAIL to run
mode toplevel

;; You should have at least one expect:required. This ensures that your process ran
;; (expect:required in "LogFileBody" > 0 "Put description here" #/put pattern here/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here
echo Got here!

;; You should have at least one expect:required. This ensures that your process ran
;; (expect:required in "LogFileBody" > 0 "Put description here" #/put pattern here/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here
echo Got here eh!

;; You should have at least one expect:required. This ensures that your process ran
;; (expect:required in "LogFileBody" > 0 "Put description here" #/put pattern here/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;; You should have at least one expect:required. This ensures that your process ran
;; (expect:required in "LogFileBody" > 0 "Put description here" #/put pattern here/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "All tests launched" #/INFO:.*All tests launched/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;; S E R V E R
;;======================================================================

(test "setup for run" #t (begin (setup-for-run)
				(string? (getenv "MT_RUN_AREA_HOME"))))

(test "server-register, get-best-server" #t (let ((res #f))
					      (open-run-close tasks:server-register tasks:open-db 1 "bob" 1234 100 'live 'http)
					      (set! res (open-run-close tasks:get-best-server tasks:open-db))
					      (number? (vector-ref res 3))))

(test "de-register server" #f (let ((res #f))
				(open-run-close tasks:server-deregister tasks:open-db "bob" port: 1234)
				(open-run-close tasks:get-best-server tasks:open-db)))

(define server-pid #f)
(test "launch server" #t (let ((pid (process-fork (lambda ()
						    ;; (daemon:ize)
						    (server:launch 'http)))))
			   (set! server-pid pid)
			   (number? pid)))

(thread-sleep! 3) ;; need to wait for server to start. Yes, a better way is needed.
(test "get-best-server" #t (let ((dat (open-run-close tasks:get-best-server tasks:open-db)))
			     (set! *runremote* (list (vector-ref dat 1)(vector-ref dat 2))) ;; host ip pullport pubport
			     (and (string? (car  *runremote*))
			     	  (number? (cadr *runremote*)))))








(test #f #t (car (cdb:login *runremote* *toppath* *my-client-signature*)))
(test #f #t (let ((res (client:login *runremote*)))
	      (car res)))



;;======================================================================
;; C O N F I G   F I L E S 
;;======================================================================

(define conffile #f)
(test "Read a config" #t (hash-table? (read-config "test.config" #f #f)))

(test #f #f (cdb:roll-up-pass-fail-counts *runremote* 1 "test1" "" "PASS"))
;; (set! *verbosity* 1)
;; (cdb:set-verbosity *runremote* *verbosity*)

(test "get all legal tests" (list "test1" "test2") (sort (get-all-legal-tests) string<=?))


(test "get-keys" "SYSTEM" (car (db:get-keys *db*)))

(define remargs (args:get-args
		 '("bar" "foo" ":runname" "bob" ":SYSTEM" "ubuntu" ":RELEASE" "v1.2" ":datapath" "blah/foo" "nada")
		 (list ":runname" ":state" ":status")
		 (list "-h")
		 args:arg-hash
		 0))

(test "register-run" #t (number?
			 (db:register-run *db*
					  '(("SYSTEM" "key1")("RELEASE" "key2"))
					  "myrun" 
					  "new"
					  "n/a" 
					  "bob")))

(test #f #t             (cdb:tests-register-test *runremote* 1 "nada" ""))
(test #f 1              (cdb:remote-run db:get-test-id #f 1 "nada" ""))
(test #f "NOT_STARTED"  (vector-ref (open-run-close db:get-test-info #f 1 "nada" "") 3))
(test #f "NOT_STARTED"  (vector-ref (cdb:get-test-info *runremote* 1 "nada" "") 3))

(define keys (db:get-keys *db*))

;;======================================================================
;; D B
;;======================================================================

(test #f "FOO LIKE 'abc%def'" (db:patt->like "FOO" "abc%def"))
(test #f "key2" (vector-ref (car (vector-ref (runs:get-runs-by-patt *db* '("SYSTEM" "RELEASE") "%" "key1/key2") 1)) 1))

(test #f "SYSTEM,RELEASE,id,runname,state,status,owner,event_time" (car (runs:get-std-run-fields keys '("id" "runname" "state" "status" "owner" "event_time"))))
(test #f #t (runs:operate-on 'print "%" "%" "%"))

;;(test "update-test-info" #t (test-update-meta-info *db* 1 "nada" 
(setenv "BLAHFOO" "1234")
(unsetenv "NADAFOO")
(test "env temp overrides" "xyz" (let ((prevvals (alist->env-vars '(("BLAHFOO" 4321)("NADAFOO" xyz))))

; (hash-table-set! args:arg-hash "-keepgoing" #t)
(hash-table-set! args:arg-hash "-itempatt" "%")
(hash-table-set! args:arg-hash "-testpatt" "%")
(hash-table-set! args:arg-hash "-target" "ubuntu/r1.2")
(test "Setup for a run"       #t (begin (setup-for-run) #t))

(define *tdb* #f)
(define keyvals #f)
(test "target->keyval" #t (let ((kv (keys:target->keyval keys (args:get-arg "-target"))))
			    (set! keyvals kv)(list? keyvals)))

(define testdbpath (conc "/tmp/" (getenv "USER") "/megatest_testing"))
(system (conc "rm -f " testdbpath "/testdat.db;mkdir -p " testdbpath))

(print "Using " testdbpath " for test db")
(test #f #t (let ((db (open-test-db testdbpath)))
	      (set! *tdb* db)
	      (sqlite3#database? db)))
(sqlite3#finalize! *tdb*)

;; (test "Remove the rollup run" #t (begin (remove-runs) #t))
(define tconfig #f)
(test "get a testconfig" #t (let ((tconf (tests:get-testconfig "test1" 'return-procs)))
			      (set! tconfig tconf)
			      (hash-table? tconf)))
(db:clean-all-caches)

(test "set-megatest-env-vars"
      "ubuntu"
      (begin
	(set-megatest-env-vars 1 inkeys: keys)
	(get-environment-variable "SYSTEM")))
(test "setup-env-defaults"
      "see this variable"
      (begin
	(setup-env-defaults "runconfigs.config" 1 *already-seen-runconfig-info* keys keyvals "pre-launch-env-vars")
	(get-environment-variable "ALLTESTS")))

(test #f "ubuntu" (car (keys:target-set-args keys (args:get-arg "-target") args:arg-hash)))

(define rinfo #f)
(test "get-run-info"  #f (vector? (vector-ref (let ((rinf (cdb:remote-run db:get-run-info #f 1)))
						(set! rinfo rinf)
						rinf) 0)))
(test "get-key-vals"  "key1" (car (cdb:remote-run db:get-key-vals #f 1)))
(test "tests:sort-by" '() (tests:sort-by-priority-and-waiton (make-hash-table)))

(test "update-test_meta" "test1" (begin
				   (runs:update-test_meta "test1" tconfig)
				   (let ((dat (cdb:remote-run db:testmeta-get-record #f "test1")))
				     (vector-ref dat 1))))

(define test-path "tests/test1")
(define disk-path #f)
(test "get-best-disk"    #t (string? (file-exists? (let ((d (get-best-disk *configdat*)))
						     (set! disk-path d)
						     d))))
(test "create-work-area" #t (symbolic-link? (car (create-work-area 1 rinfo keyvals 1 test-path disk-path "test1" '()))))
(test #f "" (item-list->path '()))

(test "launch-test" #t (string? (file-exists? (launch-test 1 1 rinfo keyvals "run1" tconfig "test1" test-path '() (make-hash-table)))))


(test "Run a test" #t (general-run-call 
		       "-runtests" 
		       "run a test"
		       (lambda (target runname keys keyvallst)
			 (let ((test-patts "test%"))
			   ;; (runs:run-tests target runname test-patts user (make-hash-table))
			   ;; (run:test run-id run-info key-vals runname test-record flags parent-test)
			   ;; (set! *verbosity* 22) ;; (list 0 1 2))
			   (run:test 1 ;; run-id

				     #f        ;; run-info is yet only a dream
				     keyvallst ;; (keys:target->keyval keys target)
				     "run1"    ;; runname 
				     (vector            ;; test_records.scm tests:testqueue
				      "test1"           ;; testname
				      tconfig           ;; testconfig
				      '()               ;; waitons
				      0                 ;; priority
				      #f                ;; items
				      #f                ;; itemsdat
				      ""                ;; itempath
				      )
				     args:arg-hash      ;; flags (e.g. -itemspatt)
				     #f)
			   ;; (set! *verbosity* 0)
			   ))))





(test "server stop" #f (let ((hostname (car  *runremote*))
			     (port     (cadr *runremote*)))
			 (tasks:kill-server #t hostname port server-pid 'http)
			 (open-run-close tasks:get-best-server tasks:open-db)))

(exit 1)
;; (test "cache is coherent" #t (let ((cached-info (db:get-test-info-cached-by-id db 2))
;; 				   (non-cached  (db:get-test-info-not-cached-by-id db 2)))
;; 			       (print "\nCached:    " cached-info)
;; 			       (print "Noncached: " non-cached)
;; 			       (equal? cached-info non-cached)))

(change-directory test-work-dir)
(test "Add a step"  #t
      (begin
	(db:teststep-set-status! db 2 "step1" "start" 0 "This is a comment" "mylogfile.html")
	(sleep 2)
	(db:teststep-set-status! db 2 "step1" "end" "pass" "This is a different comment" "finallogfile.html")

			       #t))

(hash-table-set! args:arg-hash ":runname" "%")

(test "Remove the rollup run" #t (begin (operate-on 'remove-runs)))

(print "Waiting for server to be done, should be about 20 seconds")
(test "server stop" #f (let ((hostname (car  *runremote*))
			     (port     (cadr *runremote*)))
			 (tasks:kill-server #t hostname port server-pid 'http)
			 (open-run-close tasks:get-best-server tasks:open-db)))

;; (cdb:kill-server *runremote*)

;; (thread-join! th1 th2 th3)

;; ADD ME!!!! (db:get-prereqs-not-met *db* 1 '("runfirst") "" mode: 'normal)
;; ADD ME!!!! (rdb:get-tests-for-run *db* 1 "runfirst" #f '() '())