Megatest

# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

TODO
====

WW38
. Add test_rundat to no-sync ==> correction, put in <testdir>/.meta/test-run.dat
. Add STATE/STATUS transitions to .meta/test-run.dat or similar
. Swizzle update-test-rundat to operate on no-sync
. Swizzle update-run-duration, -uname-host and cpuload-diskfree to no-sync
. On state/status change update tests table with duration

WW15
. fill newview matrix with data, filter pipeline gui elements
. improve [script], especially indent handling

WW16
. split db into megatest.db (runs etc.) db/<something>.db
. release basic newview implementation

WW18
. release split db implementation
. mtutil calls from dashboard (for remote control)
. logs browser (esp. for surfacing mtutil related activities)

WW19
. break command line into sections; all, run control, queries, utilities etc.
. pull in ftfplan (not integrated, just code pulled in)

WW20
. ./configure => ubuntu, sles11, sles12, rh7

. Add output flushing in teamcity support
. Switch to using simple runs query everywhere
. Add end_time to runs and add a rollup call that sets state, status and end_time

Future
. Switch to scsh-process pipeline management for job execution/control
. Use call-with-environment-variables more.

;;
(define (dboard:common-set-tabdat! commondat tabnum tabdat)
  (hash-table-set!
   (dboard:commondat-tabdats commondat)
   tabnum
   tabdat))

(define *updater-running* #f) ;; move this into one of the stucts

;; gets and calls updater list based on curr-tab-num
;;
(define (dboard:common-run-curr-updaters commondat #!key (tab-num #f))
  (if (dboard:common-get-tabdat commondat tab-num: tab-num) ;; only update if there is a tabdat
      (let* ((tnum     (or tab-num (dboard:commondat-curr-tab-num commondat)))
	     (updaters (hash-table-ref/default (dboard:commondat-updaters commondat)
					       tnum

	 (curr-updaters (hash-table-ref/default (dboard:commondat-updaters commondat) tnum '())))
    (hash-table-set! (dboard:commondat-updaters commondat)
		     tnum
		     (cons updater curr-updaters))))

;; data for each specific tab goes here
;;
(defstruct dboard:tabdat
  ;; flags
  ((already-running #f)                  : boolean)     ;; the updater is already running. skip
  ;; runs
  ((allruns         '())                 : list)        ;; list of dboard:rundat records
  ((allruns-by-id    (make-hash-table))  : hash-table)  ;; hash of run-id -> dboard:rundat records
  ((done-runs       '())                 : list)        ;; list of runs already drawn
  ((not-done-runs   '())                 : list)        ;; list of runs not yet drawn
  (header            #f)                                ;; header for decoding the run records
  (keys              #f)                                ;; keys for this run (i.e. target components)

;;
;;    NOTE: Yes, this is used
;;
(define (dboard:get-tests-for-run-duplicate tabdat run-id run testnamepatt key-vals)
  (let* ((start-time   (current-seconds))
	 (access-mode  (dboard:tabdat-access-mode tabdat))
         (num-to-get   (string->number (or (configf:lookup *configdat* "setup" "num-tests-to-get")
                                           "50"))) ;; was 200, which is fine in a normal run area.
	 (states       (hash-table-keys (dboard:tabdat-state-ignore-hash tabdat)))
	 (statuses     (hash-table-keys (dboard:tabdat-status-ignore-hash tabdat)))
         (do-not-use-db-file-timestamps #t) ;; (configf:lookup *configdat* "setup" "do-not-use-db-file-timestamps")) ;; this still hosts runs-summary-tab
         (do-not-use-query-timestamps   #t) ;; (configf:lookup *configdat* "setup" "do-not-use-query-timestamps")) ;; this no longer troubles runs-summary-tab
	 (sort-info    (get-curr-sort))
	 (sort-by      (vector-ref sort-info 1))
	 (sort-order   (vector-ref sort-info 2))

    ;;
    ;; (debug:print 0 *default-log-port* "got-all: " got-all " multi-get: " multi-get " num-to-get: " num-to-get " (length tmptests): " (length tmptests) " db-modified: " db-modified " db-mod-time: " db-mod-time " db-path: " db-path)
    (if got-all
	(begin
	  (dboard:rundat-last-update-set!     run-dat (- start-time 2))
	  (dboard:rundat-run-data-offset-set! run-dat 0))
	(begin
	  ;;; (thread-sleep! 0.25) ;; give the rest of the gui some time to update. <-- this did NOT help
	  (dboard:rundat-run-data-offset-set! run-dat
					      (+ num-to-get (dboard:rundat-run-data-offset run-dat)))))

    (for-each 
     (lambda (tdat)
       (let ((test-id (db:test-get-id tdat))
	     (state   (db:test-get-state tdat)))

;; this calls dboard:get-tests-for-run-duplicate for each run
;;
;; create a virtual table of all the tests
;; keypatts: ( (KEY1 "abc%def")(KEY2 "%") )
;;
(define (dboard:update-rundat tabdat runnamepatt numruns testnamepatt keypatts)
  (dboard:tabdat-already-running-set! tabdat #t)
  (let* (;; (already-running  (dboard:tabdat-already-running tabdat))
	 (access-mode      (dboard:tabdat-access-mode tabdat))
         (keys             (dboard:tabdat-keys tabdat)) ;; (db:dispatch-query access-mode rmt:get-keys db:get-keys)))
	 (last-runs-update (- (dboard:tabdat-last-runs-update tabdat) 2))
         (allruns          (rmt:get-runs runnamepatt numruns (dboard:tabdat-start-run-offset tabdat) keypatts))
         ;;(allruns-tree (rmt:get-runs-by-patt (dboard:tabdat-keys tabdat) "%" #f #f #f #f))
         (allruns-tree    (rmt:get-runs-by-patt keys "%" #f #f #f #f 0)) ;; last-runs-update));;'("id" "runname")
	 (header      (db:get-header allruns))
	 (runs        (db:get-rows   allruns)) ;; RA => Filtered as per runpatt selected

		   (elapsed-time (- (current-seconds) start-time)))
	      (if (null? all-test-ids)
		  (hash-table-delete! (dboard:tabdat-allruns-by-id tabdat) run-id)
		  (hash-table-set!    (dboard:tabdat-allruns-by-id tabdat) run-id run-struct))
	      (if (or (null? tal)
		      (> elapsed-time 2)) ;; stop loading data after 5 seconds, on the next call more data *should* be loaded since get-tests-for-run uses last update
		  (begin
		    #;(when (> elapsed-time 2)   
                      (debug:print 0 *default-log-port* "NOTE: updates are taking a long time, " elapsed-time "s elapsed.")
                      (let* ((old-val (iup:attribute *tim* "TIME"))
                             (new-val (number->string (inexact->exact (floor (* 2  (string->number old-val)))))))
                        (if (< (string->number new-val) 5000)
                            (begin
			      (debug:print 0 *default-log-port* "NOTE: increasing poll interval from "old-val" to "new-val)
			      (iup:attribute-set! *tim* "TIME" new-val)))))



		    (dboard:tabdat-allruns-set! tabdat new-res)
		    maxtests)
		  (if (> (dboard:rundat-run-data-offset run-struct) 0)
		      (loop run tal new-res newmaxtests) ;; not done getting data for this run
		      (loop (car tal)(cdr tal) new-res newmaxtests)))))))
    (dboard:tabdat-filters-changed-set! tabdat #f)
    (dboard:update-tree tabdat runs-hash header tb)
    (dboard:tabdat-already-running-set! tabdat #f)))

(define *collapsed* (make-hash-table))

(define (toggle-hide lnum uidat) ; fulltestname)
  (let* ((btn (vector-ref (dboard:uidat-get-lftcol uidat) lnum))
	 (fulltestname (iup:attribute btn "TITLE"))
	 (parts        (string-split fulltestname "("))

            sort-lb))) 
	)

        ;; insert extra widget here
        (if extra-widget
            extra-widget
            (iup:hbox)) ;; empty widget




        )))

     (let* ((status-toggles (map (lambda (status)
				   (iup:toggle (conc status)
					       #:fontsize 8 ;; btn-fontsz ;; "10"
					       ;; #:expand "HORIZONTAL"
					       #:action   (lambda (obj val)

;;  removing the tabdat-values proc 
;;
;; (define (tabdat-values tabdat)

;; runs update-rundat using the various filters from the gui
;;
(define (dashboard:do-update-rundat tabdat)
  ;; this seems like a good place to check for already running and skip if so
  ;;
  ;; (set! *updater-running* #t)
;;(if (dboard:tabdat-already-running tabdat)
;;    (begin
;;	(debug:print-info 0 *default-log-port* "Dashboard overloaded - updates will be slow, skipping update.")
;;	(dboard:tabdat-target tabdat))
  (dboard:update-rundat
   tabdat
   (hash-table-ref/default (dboard:tabdat-searchpatts tabdat) "runname" "%")
   (dboard:tabdat-numruns tabdat)
   (hash-table-ref/default (dboard:tabdat-searchpatts tabdat) "test-name" "%/%")
   ;; generate key patterns from the target stored in tabdat
   (let* ((dbkeys (dboard:tabdat-dbkeys tabdat)))
     (let ((fres   (if (dboard:tabdat-target tabdat)
		       (let ((ptparts (append (dboard:tabdat-target tabdat)(make-list (length dbkeys) "%"))))
			 (map (lambda (k v)(list k v)) dbkeys ptparts))
		       (let ((res '()))
			 (for-each (lambda (key)
				     (if (not (equal? key "runname"))
					 (let ((val (hash-table-ref/default (dboard:tabdat-searchpatts tabdat) key #f)))
					   (if val (set! res (cons (list key val) res))))))
				   dbkeys)
			 res))))
       fres)))
  #;(set! *updater-running* #f))

(define (dashboard:runs-tab-updater commondat tab-num)
  (debug:catch-and-dump 
   (lambda ()
     (let* ((tabdat (dboard:common-get-tabdat commondat tab-num: tab-num))
	    (dbkeys (dboard:tabdat-dbkeys tabdat)))
       (dashboard:do-update-rundat tabdat)

	 commondat 
	 (lambda ()
	   (dashboard:runs-tab-updater commondat 1))
	 tab-num: 2)
	(iup:callback-set! *tim*
			   "ACTION_CB"
			   (lambda (time-obj)
			     (if (not *updater-running*)
				 (begin
				   ;; (mutex-lock! (dboard:commondat-update-mutex commondat))
				   ;; (set! update-is-running (dboard:commondat-updating commondat))
				   ;;(if (not update-is-running)
				   ;;	   (dboard:commondat-updating-set! commondat #t))
				   ;;(mutex-unlock! (dboard:commondat-update-mutex commondat))
				   ;;(if (not update-is-running) ;; we know that the update was not running and we now have a lock on doing an update
				   ;;	   (begin
				   (set! *updater-running* #t)
				   (dboard:common-run-curr-updaters commondat) ;; (dashboard:run-update commondat)
				   (set! *updater-running* #f)
				   ;; (mutex-lock! (dboard:commondat-update-mutex commondat))
				   ;;  (dboard:commondat-updating-set! commondat #f)
				   ;;   (mutex-unlock! (dboard:commondat-update-mutex commondat)))
				   ))
			     1))))
      
      (let ((th1 (make-thread (lambda ()
				(thread-sleep! 1)
				(dboard:common-run-curr-updaters commondat 0) ;; force update of summary tab 
				) "update buttons once"))

	  (debug:print 0 *default-log-port* "ERROR: cannot read " infile)
          (debug:print 0 *default-log-port* "ERROR: run-dir is " run-dir)
          #f
          )
        (with-input-from-file infile read-lines)
	)))

;; check duration against test-run.dat file if it exists and update the value in
;; the db if necessary
;;
(define (db:adjust-run-duration dbstruct test-id run-dir event-time run-duration)
  (let* ((datf             (conc run-dir ".mt_data/test-run.dat"))
	 (modt             (if (and (file-exists? datf)
				    (file-read-access? datf))
			       (file-modification-time datf)
			       #f)) ;; (+ event-time run-duration))))
	 (alt-run-duration (if modt
			       (- modt event-time)
			       #f)))
    (if (and alt-run-duration
	     (> alt-run-duration run-duration))
	(begin
	  (debug:print 0 *default-log-port* "Test " test-id " run duration mismatch. Setting to " alt-run-duration)
	  (db:with-db
	   dbstruct #f #f
	   (lambda (db)
	     (sqlite3:execute db "UPDATE tests SET run_duration=? WHERE id=?;" alt-run-duration test-id)
	     #t)))
	#f))) ;; #f = we did NOT adjust the time
	      
(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
          ;; The default running-deadtime is 720 seconds = 12 minutes.
          ;; "(running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))" = 200 + (2 * (200 + 30 + 30))
         (deadtime-trim (or ovr-deadtime (configf:lookup-number *configdat* "setup" "deadtime")))

	 ;; HOWEVER: this code in run:test seems to work fine
	 ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
	 ;;                     (db:test-get-run_duration testdat)))
	 ;;                    600) 
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)
	    (if (not (db:adjust-run-duration dbstruct test-id run-dir event-time run-duration))
		(if (and (equal? uname "n/a")
			 (equal? item-path "")) ;; this is a toplevel test
		    ;; what to do with toplevel? call rollup?
		    (begin
		      (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		      (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		    (begin
		      (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))
		      (debug:print-info 0 *default-log-port* "Found old test in RUNNING state, test-id="
					test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)
					" event-time="event-time" run-duration="run-duration)))))
	  stmth1
	  run-id running-deadtime) ;; default time 720 seconds
	    
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)
	    (if (not (db:adjust-run-duration dbstruct test-id run-dir event-time run-duration))
		(if (and (equal? uname "n/a")
			 (equal? item-path "")) ;; this is a toplevel test
		    ;; what to do with toplevel? call rollup?
		    (begin
		      (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		      (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		    (begin
		      (debug:print-info 0 *default-log-port* "Found old test in REMOTEHOSTSTART state, test-id=" test-id
					" exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time
					" run-duration="run-duration)
		      (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))))
	  stmth2
	  run-id remotehoststart-deadtime) ;; default time 230 seconds
	 
	 ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
	 ;;
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row

	  -1 "-" "-"))

;;
;; 1. cache tests-match-qry
;; 2. compile qry and store in hash
;; 3. convert for-each-row to fold
;;
#;(define (db:get-tests-for-run-state-status dbstruct run-id testpatt)
  (db:with-db
   dbstruct run-id #f
   (lambda (db)
     (let* ((res            '())
	    (stmt-cache      (dbr:dbstruct-stmt-cache dbstruct))
	    (stmth           (let* ((sh (db:hoh-get stmt-cache db testpatt)))
			       (or sh

  (let* ((run-ids (db:get-all-run-ids mtdb)))
    (for-each 
     (lambda (run-id)
       (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id)))
	 (db:prep-megatest.db-adj-test-ids (db:dbdat-get-db mtdb) run-id testrecs)))
     run-ids)))

;; Get test data using test_id, run-id is not used - but it will be!
;; 
(define (db:get-test-info-by-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   #f ;; run-id
   #f
   (lambda (db)

			   (round 
			    (- 
			     (current-seconds) 
			     start-seconds)))))
	 (kill-tries 0))
    ;; (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area)
    ;; (tests:set-full-meta-info test-id run-id (calc-minutes) work-area)
    (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area 10 update-db: #t)

    (let loop ((minutes   (calc-minutes))
	       (cpu-load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
	       (disk-free (get-df (current-directory)))
               (last-sync (current-seconds)))
      ;; (common:telemetry-log "zombie" (conc "launch:monitor-job -
      ;; top of loop encountered at "(current-seconds)" with
      ;; last-sync="last-sync))
      (let* ((over-time     (> (current-seconds) (+ last-sync update-period)))
             (new-cpu-load  (let* ((load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
                                   (delta (abs (- load cpu-load))))
                              (if (> delta 0.1) ;; don't bother updating with small changes
                                  load
                                  #f)))
             (new-disk-free (let* ((df    (if over-time ;; only get df every 30 seconds

             (do-sync       (or new-cpu-load new-disk-free over-time))

             (test-info   (rmt:get-test-info-by-id run-id test-id))
             (state       (db:test-get-state test-info))
             (status      (db:test-get-status test-info))
             (kill-reason  "no kill reason specified")
             (kill-job?    #f))
        #;(common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        (cond
         ((test-get-kill-request run-id test-id)
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))
          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" (- (current-seconds) start-seconds) " seconds, limit=" runtlim))
          (set! kill-job? #t))
         ((equal? status "DEAD")
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f update-db: #t)
          (rmt:set-state-status-and-roll-up-items run-id test-id 'foo "RUNNING" "n/a" "was marked dead; really still running.")
          ;;(set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests (might indicate really overloaded server or else overzealous setup.deadtime)") ;; MARK RUNNING
          (set! kill-job? #f)))

        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)
        (launch:handle-zombie-tests run-id)
        (if do-sync ;; save meta data about the running of this test



	    (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f))


	(if kill-job? 
	    (begin
              (debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second
	      ;;       between tries?

	    (begin
	      (thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses
	      (if (hash-table-ref/default misc-flags 'keep-going #f)  ;; keep originals for cpu-load and disk-free unless they change more than the allowed delta
		  (loop (calc-minutes)
                        (or new-cpu-load cpu-load)
                        (or new-disk-free disk-free)
                        (if do-sync (current-seconds) last-sync)))))))
    (tests:update-central-meta-info run-id test-id (get-cpu-load) (get-df (current-directory))(calc-minutes) #f #f update-db: #t))) ;; NOTE: Checking twice for keep-going is intentional


(define (launch:execute encoded-cmd)
  (let* ((cmdinfo    (common:read-encoded-string encoded-cmd))
	 (tconfigreg #f))
    (setenv "MT_CMDINFO" encoded-cmd)
    ;;(bb-check-path msg: "launch:execute incoming")

				(db:test-get-host        test-info)
				(begin
				  (debug:print 0 *default-log-port* "ERROR: failed to find a record for test-id " test-id ", exiting.")
				  (exit))))
		 (test-pid  (db:test-get-process_id  test-info)))
	    (cond
             ;; -mrw- I'm removing KILLREQ from this list so that a test in KILLREQ state is treated as a "do not run" flag.
	     ((or (member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
		  (and (equal? (db:test-get-state test-info) "COMPLETED")                           ;; completed/abort => rerun if asked
		       (member (db:test-get-status test-info) '("ABORT"))))
	      (debug:print 0 *default-log-port* "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")

              (rmt:general-call 'set-test-start-time #f test-id)
              (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      ) ;; prime it for running
	     ((member (db:test-get-state test-info) '("RUNNING" "REMOTEHOSTSTART"))

                 (item-path (vector-ref running-test 11)))
			       	(debug:print 0 *default-log-port* "test " test-name "/" item-path " not completed")
              (if (not (null? tal))
				  (loop (car tal) (cdr tal)))))))))))        
 
(define (launch:is-test-alive host pid)
  (if (and host pid (not (equal? host "n/a")))
      (let* ((is-local (equal? host (get-host-name)))
	     (ssh-cmd   (if is-local " " (conc "ssh " host " ")))
	     (cmd (conc ssh-cmd "pstree -A " pid))
	     (output (with-input-from-pipe cmd read-lines)))
	(debug:print 2 *default-log-port* "Running " cmd " received " output)
	(if (eq? (length output) 0)
	   #f
	   #t))
      #t))
 

	(begin ;; (let ((lnktarget (conc lnkpath "/" item-path)))
	  (debug:print 2 *default-log-port* "Setting up sub test run area")
	  (debug:print 2 *default-log-port* " - creating run area in " test-path)
	  (handle-exceptions
	   exn
	   (begin
	     (debug:print-error 0 *default-log-port* " Failed to create directory " test-path ((condition-property-accessor 'exn 'message) exn)
				", continuing (might cause downstream issues?), exn=" exn)

	     #f)
	   (create-directory test-path #t))
	  (debug:print 2 *default-log-port* 
		       " - creating link from: " test-path "\n"
		       "                   to: " lnktarget)

	  ;; If there is already a symlink delete it and recreate it.
	  (handle-exceptions

;;     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

;; Always use two or four digit decimal
;; 1.01, 1.02...1.10,1.11,1.1101 ... 1.99,2.00..

;; (declare (unit megatest-version))

(define megatest-version 1.6572)

(use format typed-records) ;; RADT => purpose of json format??

(declare (unit rmt))
(declare (uses api))
(declare (uses http-transport))
(include "common_records.scm")
(include "db_records.scm")

;; (declare (uses rmtmod))

;; (import rmtmod)

;;
;; THESE ARE ALL CALLED ON THE CLIENT SIDE!!!
;;

;; Just some syntatic sugar
(define (rmt:register-test run-id test-name item-path)
  (rmt:general-call 'register-test run-id run-id test-name item-path))

(define (rmt:get-test-id run-id testname item-path)
  (rmt:send-receive 'get-test-id run-id (list run-id testname item-path)))

;; run-id is NOT used - but it will be! 
;;
(define (rmt:get-test-info-by-id run-id test-id)
  (if (number? test-id)
      (let* ((testdat  (rmt:send-receive 'get-test-info-by-id run-id (list run-id test-id)))
	     (trundatf (conc (db:test-get-rundir testdat) "/.mt_data/test-run.dat")))
	;; now we can update a couple fields from the filesystem
	(if (and (db:test-get-rundir testdat)
		 (file-exists? trundatf))
	    (let* ((duration   (db:test-get-run_duration testdat))
		   (event-time (db:test-get-event_time   testdat))
		   (last-touch (file-modification-time trundatf)))
	      (db:test-set-run_duration! testdat (max duration (- last-touch event-time)))))
	testdat)
      (begin
	(debug:print 0 *default-log-port* "WARNING: Bad data handed to rmt:get-test-info-by-id run-id=" run-id ", test-id=" test-id)
	(print-call-chain (current-error-port))
	#f)))

(define (rmt:test-get-rundir-from-test-id run-id test-id)
  (rmt:send-receive 'test-get-rundir-from-test-id run-id (list run-id test-id)))

  (last-load-check-time    0)
  (last-jobs-check-time    0)
  )

(defstruct runs:testdat
  hed tal reg reruns  test-record
  test-name item-path jobgroup
  waitons testmode  newtal
  itemmaps
  (prereqs-not-met '())
  (last-update 0) ;; 
  )
  
;; look in the $MT_RUN_AREA_HOME/.softlocks directory for key-host-pid.softlock files
;;  - remove any that are over 3600 seconds old
;;  - if there are any that are younger than 10 seconds
;;      * sleep 10 seconds
;;      * touch my key-host-pid.softlock file
;;      * return

;;    => review of a previously seen test is higher priority of never visited test
;; reg - list of previously visited tests
;; tal - list of never visited tests
;;   prefer next hed to be from reg than tal.

(define runs:nothing-left-in-queue-count 0)

(define (runs:lazy-get-prereqs-not-met  testdat run-id waitons hed item-path #!key (mode '(normal))(itemmaps #f)) ;; mode: testmode itemmaps: itemmaps)
  (if (and (runs:testdat-prereqs-not-met testdat)
	   (< (- (current-seconds) (runs:testdat-last-update testdat)) 10)) ;; only refresh for this test if it has been at least 10 seconds
      (runs:testdat-prereqs-not-met testdat)
      (let* ((res (let ((res (rmt:get-prereqs-not-met run-id waitons hed item-path mode: mode itemmaps: itemmaps)))
		    (if (list? res)
			res
			(begin
			  (debug:print 0 *default-log-port*
				       "ERROR: rmt:get-prereqs-not-met returned non-list!\n"
				       "  res=" res " run-id=" run-id " waitons=" waitons " hed=" hed " item-path=" item-path " testmode=" mode " itemmaps=" itemmaps)
			  '())))))
	(runs:testdat-prereqs-not-met-set! testdat res)
	(runs:testdat-last-update-set! testdat (current-seconds))
	res)))
	   
;;======================================================================
;; runs:expand-items is called by runs:run-tests-queue
;;======================================================================
;;
;; return value of runs:expand-items is passed back to runs-tests-queue and is fed to named loop with this signature:
;;    (let loop ((hed         (car sorted-test-names))
;;	         (tal         (cdr sorted-test-names))
;;	         (reg         '()) ;; registered, put these at the head of tal 
;;	         (reruns      '()))
(define (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record
			   can-run-more items runname tconfig reglen test-registry test-records itemmaps testdat)
  (let* ((loop-list       (list hed tal reg reruns))
	 (prereqs-not-met (runs:lazy-get-prereqs-not-met testdat run-id waitons hed item-path mode: testmode itemmaps: itemmaps))
	  #;(let ((res (rmt:get-prereqs-not-met run-id waitons hed item-path mode: testmode itemmaps: itemmaps)))
			    (if (list? res)
				res
				(begin
				  (debug:print 0 *default-log-port*
					       "ERROR: rmt:get-prereqs-not-met returned non-list!\n"
					       "  res=" res " run-id=" run-id " waitons=" waitons " hed=" hed " item-path=" item-path " testmode=" testmode " itemmaps=" itemmaps)
				  '())))
	 (have-itemized   (not (null? (lset-intersection eq? testmode '(itemmatch itemwait)))))
	 ;; (prereqs-not-met (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails           (runs:calc-fails prereqs-not-met))
	 (prereq-fails    (runs:calc-prereq-fail prereqs-not-met))
	 (non-completed   (runs:calc-not-completed prereqs-not-met))
	 (runnables       (runs:calc-runnable prereqs-not-met))
         (unexpanded-prereqs
          (filter (lambda (testname)

				  ;; wait for load here
				  (if (runs:dat-load-mgmt-function runsdat)((runs:dat-load-mgmt-function runsdat)))
				  (loop-can-run-more (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs)
						     (- remtries 1)))))))
		       )))))

	  ;; I'm not clear on why prereqs are gathered here TODO: verfiy this is needed
	  (runs:lazy-get-prereqs-not-met testdat run-id waitons hed item-path
					 mode: testmode
					 itemmaps: itemmaps)

	  ;; I'm not clear on why we'd capture running job counts here TODO: verify this is needed
	  (runs:dat-can-run-more-tests-set! runsdat (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs))

	  (let ((loop-list (runs:process-expanded-tests runsdat testdat))) ;; in process-expanded-tests ultimately run:test -> launch-test -> test actually running
            (if loop-list (apply loop loop-list))))

         
	 ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	 ;;    - but only do that if resources exist to kick off the job
	 ;; EXPAND ITEMS
	 ((or (procedure? items)(eq? items 'have-procedure))
          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-4")
	  (let ((can-run-more    #f)) ;; (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs)))
	    (if (not can-run-more) #;(and (list? can-run-more) ;; IDEA, this mechanism may have had some value, make it configurable to test pros/cons TODO
		(car can-run-more))
		(let ((loop-list (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs
						    max-concurrent-jobs run-id waitons item-path
						    testmode test-record can-run-more items runname
						    tconfig reglen test-registry test-records itemmaps)))
		  (if loop-list
		      (apply loop loop-list)
                      (debug:print-info 4 *default-log-port* " -- Can't expand hed="hed)))


		;; if can't run more just loop with next possible test
		(loop (car newtal)(cdr newtal) reg reruns))))
         
	 ;; this case should not happen, added to help catch any bugs
	 ((and (list? items) itemdat)
          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-5")
	  (debug:print-error 0 *default-log-port* "Should not have a list of items in a test and the itemspath set - please report this")

	 (lambda (count)
	   (set! res count))
	 tdb
	 "SELECT count(id) FROM test_rundat;")
	res))
  0)

;; 
(define (tests:update-central-meta-info run-id test-id cpuload diskfree minutes uname hostname #!key (update-db #f)(tmpfree #f))
  (if (get-environment-variable "MT_TEST_RUN_DIR")
      (let* ((dest-dir (conc (get-environment-variable "MT_TEST_RUN_DIR") "/.mt_data"))
	     (or-dash  (lambda (instr)
			 (cond
			  ((not instr) "") ;; #f -> blank, indicates value unchanged since last measurement taken
			  ((string? instr)(if (string-search " " instr) (conc "\"" instr "\"") instr))
			  (else instr))))
	     (file-new (not (directory-exists? dest-dir))))
	(if file-new (create-directory dest-dir #t))
	(let* ((outp (open-output-file (conc dest-dir "/test-run.dat") #:append)))
	  (with-output-to-port outp
	    (lambda ()
	      (if file-new
		  (print "epoch_time,run_id,test_id,cpuload,diskfree,tmpfree,run_minutes,hostname,uname"))
	      (print (current-seconds) "," (or-dash run-id)   "," (or-dash test-id)  ","
		     (or-dash cpuload) "," (or-dash diskfree) "," (or-dash tmpfree)  ","
		     (or-dash minutes) "," (or-dash hostname) ","
		     (or-dash uname)))) ;; put uname last as it has spaces in it
	  (close-output-port outp)))
      (begin
	(rmt:general-call 'update-test-rundat run-id test-id (current-seconds) (or cpuload -1)(or diskfree -1) -1 (or minutes -1))))
  (if update-db
      (begin
	(if (and cpuload diskfree)
	    (rmt:general-call 'update-cpuload-diskfree run-id cpuload diskfree test-id))
	(if minutes 
	    (rmt:general-call 'update-run-duration run-id minutes test-id))
	(if (and uname hostname)
	    (rmt:general-call 'update-uname-host run-id uname hostname test-id)))))
  
;; This one is for running with no db access (i.e. via rmt: internally)
(define (tests:set-full-meta-info db test-id run-id minutes work-area remtries #!key (update-db #f))
;; (define (tests:set-full-meta-info test-id run-id minutes work-area)
;;  (let ((remtries 10))
  (let* ((cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory)))
	 (tmpfree  (get-df "/tmp"))
	 (uname    (get-uname "-srvpio"))
	 (hostname (get-host-name)))
    (tests:update-central-meta-info run-id test-id cpuload diskfree minutes uname hostname update-db: update-db tmpfree: tmpfree)))
    























	 
;;======================================================================
;; A R C H I V I N G
;;======================================================================

(define (test:archive db test-id)
  #f)