Megatest

    (4 "WARN")
    (5 "WAIVED")
    (6 "CHECK")
    (7 "STUCK/DEAD")
    (8 "DEAD")
    (9 "FAIL")
    (10 "PREQ_FAIL")
    (11 "PREQ_DISCARDED")
    (12 "ABORT")))

(define *common:ended-states*       ;; states which indicate the test is stopped and will not proceed
  '("COMPLETED" "ARCHIVED" "KILLED" "KILLREQ" "STUCK" "INCOMPLETE" ))

(define *common:badly-ended-states* ;; these roll up as CHECK, i.e. results need to be checked
  '("KILLED" "KILLREQ" "STUCK" "INCOMPLETE" "DEAD"))

(define *common:well-ended-states* ;; an item's prereq in this state allows item to proceed
  '("PASS" "WARN" "CHECK" "WAIVED" "SKIP"))

;; BBnote: *common:running-states* used from db:set-state-status-and-roll-up-items
(define *common:running-states*     ;; test is either running or can be run
  '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED" "STARTED"))

(define *common:cant-run-states*    ;; These are stopping conditions that prevent a test from being run
  '("COMPLETED" "KILLED" "UNKNOWN" "INCOMPLETE" "ARCHIVED"))

				   "# export "
				   "export ")
			       key "=" delim (mungeval val) delim)))
                    envvars)))))

;; set some env vars from an alist, return an alist with original values
;; (("VAR" "value") ...)
;; a value of #f means "unset this var"
;;
(define (alist->env-vars lst)
  (if (list? lst)
      (let ((res '()))
	(for-each (lambda (p)
		    (let* ((var (car  p))
			   (val (cadr p))
			   (prv (get-environment-variable var)))

     (lambda (frame)
       (let* ((this-loc (vector-ref frame 0))
              (temp     (string-split (->string this-loc) " "))
              (this-func (if (and (list? temp) (> (length temp) 1)) (cadr temp) "???")))
         (if (equal? this-func "BB>")
             (set! location this-loc))))
     stack)
    (let* ((color-on "\x1b[1m")
           (color-off "\x1b[0m")
           (dp-args
            (append
             (list 0 *default-log-port*
                   (conc color-on location "@"(/ (- (current-milliseconds) *BB-process-starttime*) 1000) color-off "   ")  )
             in-args)))
      (apply debug:print dp-args))))

(define *BBpp_custom_expanders_list* (make-hash-table))



;; register hash tables with BBpp.

  (let ((sectdat (hash-table-ref/default cfgdat section '())))
    (if (null? sectdat)
	'()
	(map car sectdat))))

(define (configf:get-section cfgdat section)
  (hash-table-ref/default cfgdat section '()))

(define (configf:set-section-var cfgdat section var val)
  (let ((sectdat (configf:get-section cfgdat section)))
    (hash-table-set! cfgdat section
                     (config:assoc-safe-add sectdat var val))))

    ;;(append (filter (lambda (x)(not (assoc var sectdat))) sectdat)
    ;;	    (list var val))))

(define (setup)
  (let* ((configf (find-config "megatest.config"))
	 (config  (if configf (read-config configf #f #t) #f)))
    (if config
	(setenv "RUN_AREA_HOME" (pathname-directory configf)))
    config))

			       command-text-box "VALUE"
			       (conc "megatest -remove-runs -target " keystring " -runname " runname
				     " -testpatt " (conc testname "/" (if (equal? item-path "")
									  "%"
									  item-path))
				     " -v"))))
	       (clean-run-execute  (lambda (x)
				     (let ((cmd (conc ;; "megatest -remove-runs -target " keystring " -runname " runname
                                                 "megatest -set-state-status NOT_STARTED,n/a -target " keystring " -runname " runname
						      " -testpatt " (conc testname "/" (if (equal? item-path "")
						       					   "%"
						       					   item-path))
                                                      ";megatest -target " keystring " -runname " runname 
						      " -run -preclean -testpatt " (conc testname "/" (if (equal? item-path "")
											   "%" 
											   item-path))
						      " -clean-cache"
						      )))
                                       (thread-start! (make-thread (lambda ()
                                                                     (common:run-a-command cmd))

;;
;; (define (db:launch-delay-left dbstruct run-id launch-delay)
  

;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));

(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
	 (deadtime-str (configf:lookup *configdat* "setup" "deadtime")) ;; FIXME suspect test run time & deadtime are not well matched; resulting in COMPLETED/DEAD status of an a-ok running test
	 (deadtime     (if (and deadtime-str

(define (db:get-run-times dbstruct run-patt target-patt)
(let ((res `())
           (qry 	(conc "select runname, (max(end_time)-min(event_time))/60 as runtime, target from (select runname, run_id,tests.event_time,tests.event_time+run_duration AS end_time, " (string-join (db:get-keys dbstruct) " || '/' || ") " as target from tests inner join runs on tests.run_id = runs.id where runs.runname like ? and target like ?) group by run_id ;")))
;(print qry)
(db:with-db 
   dbstruct
   #f ;; this is for the main runs db
   #f ;; does not modify db
   (lambda (db)
            (sqlite3:for-each-row
	(lambda (runname runtime target )

            (sqlite3:for-each-row
	(lambda (test-name item-path test-time target )
	  (set! res (cons (vector test-name item-path test-time) res)))
	db
        qry 
	run-name target)
       res))))

(define (db:get-test-times dbstruct run-name target)
  (let ((res `())
        (qry 	(conc "select testname, item_path, run_duration, " (string-join (db:get-keys dbstruct) " || '/' || ") " as target from tests inner join runs on tests.run_id = runs.id where runs.runname = ? and target = ?  ;")))
   
  (db:with-db 
    dbstruct
    #f ;; this is for the main runs db
    #f ;; does not modify db
    (lambda (db)
            (sqlite3:for-each-row
	(lambda (test-name item-path test-time target )
	  (set! res (cons (vector test-name item-path test-time) res)))
	db
        qry 
	run-name target)
       res))))

;;======================================================================
;; S T E P S
;;======================================================================

(define (db:teststep-set-status! dbstruct run-id test-id teststep-name state-in status-in comment logfile)
  (db:with-db

	;;	(if (equal? (db:test-get-item-path testdat) "")
	;;	    (db:test-get-testname testdat)
	;;	    (conc (db:test-get-testname testdat)
	;;		  "/"
	;;		  (db:test-get-item-path testdat))))
	 running-tests) ;; calling functions want the entire data
       '())

   ;; collection of: for each waiton -
   ;;   if this ref-test-name is an item in an itemized test and mode is itemwait/itemmatch:
   ;;     if waiton is not itemized - if waiton is not both completed and in ok status, add as unmet prerequisite
   ;;     if waiton is itemized:
   ;;           and waiton's items are not expanded, add as unmet prerequisite
   ;;           else if matching waiton item is not both completed and in an ok status, add as unmet prerequisite
   ;;   else
   ;;    if waiton toplevel is not in both completed and ok status, add as unmet prerequisite

   (if (or (not waitons)
	   (null? waitons))
       '()
       (let* ((ref-test-itemized-mode (not (null? (lset-intersection eq? mode '(itemmatch itemwait)))))
              (ref-test-toplevel-mode (not (null? (lset-intersection eq? mode '(toplevel)))))
              (ref-test-is-toplevel   (equal? ref-item-path ""))
              (ref-test-is-item       (not ref-test-is-toplevel))
              (unmet-pre-reqs '())
	      (result         '())
              (unmet-prereq-items '())
              )
	 (for-each  ; waitons
	  (lambda (waitontest-name)
	    ;; by getting the tests with matching name we are looking only at the matching test 
	    ;; and related sub items
	    ;; next should be using mt:get-tests-for-run?

            (let (;(waiton-is-itemized ...)
                  ;(waiton-items-are-expanded ...)
                  (waiton-tests             (db:get-tests-for-run-state-status dbstruct run-id waitontest-name))
		  (ever-seen         #f)
		  (parent-waiton-met #f)
		  (item-waiton-met   #f)

                  )
	      (for-each ; test expanded from waiton
	       (lambda (waiton-test) 

		 (let* ((waiton-state             (db:test-get-state waiton-test))
			(waiton-status            (db:test-get-status waiton-test))
			(waiton-item-path         (db:test-get-item-path waiton-test)) ;; BB- this is the upstream itempath
                        (waiton-is-toplevel       (equal? waiton-item-path ""))
                        (waiton-is-item           (not waiton-is-toplevel))
			(waiton-is-completed      (member waiton-state  *common:ended-states*))
			(waiton-is-running        (member waiton-state  *common:running-states*))
			(waiton-is-killed         (member waiton-state  *common:badly-ended-states*))
			(waiton-is-ok             (member waiton-status *common:well-ended-states*))
			;;                                       testname-b    path-a    path-b
			(same-itempath     (db:compare-itempaths ref-test-name waiton-item-path ref-item-path itemmaps))) ;; (equal? ref-item-path waiton-item-path)))
		   (set! ever-seen #t)
                   ;;(BB> "***consider waiton "waiton-test"/"waiton-item-path"***")
                   (cond
                    ;; case 0 - toplevel of an itemized test, at least one item in prereq has completed
                    ((and waiton-is-item ref-test-is-toplevel ref-test-itemized-mode waiton-is-completed)
                     (set! parent-waiton-met #t))

                    ;; case 1, non-item (parent test) is 
		    ((and waiton-is-toplevel ;; this is the parent test of the waiton being examined
			  waiton-is-completed
                          ;;(BB> "cond1")
			  (or waiton-is-ok ref-test-toplevel-mode)) ;;  itemmatch itemwait))))))
		     (set! parent-waiton-met #t))
		    ;; Special case for toplevel and KILLED
		    ((and waiton-is-toplevel ;; this is the parent test
			  waiton-is-killed
			  (member 'toplevel mode))
                     ;;(BB> "cond2")
		     (set! parent-waiton-met #t))
		    ;; For itemwait mode IFF the previous matching item is good the set parent-waiton-met


                    ((and ref-test-itemized-mode ref-test-is-item same-itempath)
                     ;;(BB> "cond3")
		     (if (and waiton-is-completed (or waiton-is-ok ref-test-toplevel-mode)) 
                         (set! item-waiton-met #t)
                         (set! unmet-prereq-items (cons waiton-test unmet-prereq-items)))
                     (if (and waiton-is-toplevel ;; if upstream rollup test is completed, parent-waiton-met is set
			      (or waiton-is-completed waiton-is-running))
			 (set! parent-waiton-met #t)))
		    ;; normal checking of parent items, any parent or parent item not ok blocks running
		    ((and waiton-is-completed
			  (or waiton-is-ok 
			      (member 'toplevel mode))              ;; toplevel does not block on FAIL
			  (and waiton-is-ok (member 'itemmatch mode) ;; itemmatch blocks on not ok
                               ))
                     ;;(BB> "cond4")
		     (set! item-waiton-met #t))

                    ((and waiton-is-completed waiton-is-ok same-itempath)
                     ;;(BB> "cond5")
                     (set! item-waiton-met #t))
                    (else
                     #t
                     ;;(BB> "condelse")
                     ))))
               waiton-tests)
	      ;; both requirements, parent and item-waiton must be met to NOT add item to
	      ;; prereq's not met list
               ;; (BB>
               ;;  "\n* waiton-tests           "waiton-tests
               ;;  "\n* parent-waiton-met      "parent-waiton-met
               ;;  "\n* item-waiton-met        "item-waiton-met
               ;;  "\n* ever-seen              "ever-seen
               ;;  "\n* ref-test-itemized-mode "ref-test-itemized-mode
               ;;  "\n* unmet-prereq-items     "unmet-prereq-items
               ;;  "\n* result (pre)           "result
               ;;  "\n* ever-seen              "ever-seen
               ;;  "\n")

              (cond
               ((and ref-test-itemized-mode ref-test-is-item (not (null? unmet-prereq-items)))
                (set! result (append unmet-prereq-items result)))
               ((not (or parent-waiton-met item-waiton-met))
                (set! result (append (if (null? waiton-tests) (list waitontest-name) waiton-tests) result))) ;; appends the string if the full record is not available
	      ;; if the test is not found then clearly the waiton is not met...
	      ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
               ((not ever-seen)
                (set! result (append (if (null? waiton-tests)(list waitontest-name) waiton-tests) result))))))
	  waitons)
	 (delete-duplicates result)))))

;;======================================================================
;; Just for sync, procedures to make sync easy
;;======================================================================

<!DOCTYPE html>
<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<meta name="generator" content="AsciiDoc 8.6.7">
<title>The Megatest Users Manual</title>
<style type="text/css">
/* Shared CSS for AsciiDoc xhtml11 and html5 backends */

/* Default font. */
body {
  font-family: Georgia,serif;

ul, ol, li > p {
  margin-top: 0;
}
ul > li     { color: #aaa; }
ul > li > * { color: black; }

pre {



  padding: 0;
  margin: 0;
}




#author {
  color: #527bbd;
  font-weight: bold;
  font-size: 1.1em;
}
#email {

div.exampleblock > div.content {
  border-left: 3px solid #dddddd;
  padding-left: 0.5em;
}

div.imageblock div.content { padding-left: 0; }
span.image img { border-style: none; }
a.image:visited { color: white; }

dl {
  margin-top: 0.8em;
  margin-bottom: 0.8em;
}
dt {

div.unbreakable { page-break-inside: avoid; }


/*
 * xhtml11 specific
 *
 * */

tt {
  font-family: "Courier New", Courier, monospace;
  font-size: inherit;
  color: navy;
}

div.tableblock {
  margin-top: 1.0em;
  margin-bottom: 1.5em;
}
div.tableblock > table {
  border: 3px solid #527bbd;

}


/*
 * html5 specific
 *
 * */

.monospaced {
  font-family: "Courier New", Courier, monospace;
  font-size: inherit;
  color: navy;
}

table.tableblock {
  margin-top: 1.0em;
  margin-bottom: 1.5em;
}
thead, p.tableblock.header {
  font-weight: bold;

body.manpage div.sectionbody {
  margin-left: 3em;
}

@media print {
  body.manpage div#toc { display: none; }
}


@media screen {
  body {
    max-width: 50em; /* approximately 80 characters wide */
    margin-left: 16em;
  }

  #toc {

<div class="content monospaced">
<pre>[triggers]
COMPLETED/ xterm -e bash -s --</pre>
</div></div>
<div class="admonitionblock">
<table><tr>
<td class="icon">
<img src="/nfs/pdx/disks/ice.disk.002/icfadm/pkgs/asciidoc/8.6.7/images/icons/note.png" alt="Note">
</td>
<td class="content">There is a trailing space after the --</td>
</tr></table>
</div>
<div class="paragraph"><p>There are a number of environment variables available to the trigger script
but since triggers can be called in various contexts not all variables are
available at all times. The trigger script should check for the variable and

megatest -envdelta original-munged -dumpmode ini -o modified.config</pre>
</div></div>
<div class="paragraph"><p>Then in runconfigs.config</p></div>
<div class="listingblock">
<div class="title">Example of using modified.config in a testconfig</div>
<div class="content monospaced">
<pre>cat testconfig

[pre-launch-env-vars]
[include modified.config]</pre>
</div></div>
</div>
</div>
</div>
<div class="sect1">

<div class="listingblock">
<div class="title">For each target, remove all runs but the most recent 3 if they are over 1 week old</div>
<div class="content monospaced">
<pre># use -precmd 'sleep 5;nbfake' to limit overloading the host computer but to allow the removes to run in parallel.
megatest -actions print,remove-runs -remove-keep 3 -target %/%/%/% -runname % -age 1w -precmd 'sleep 5;nbfake'"</pre>
</div></div>
</div>
</div>
<div class="sect1">
<h2 id="_nested_runs">Nested Runs</h2>
<div class="sectionbody">
<div class="paragraph"><p>A Megatest test can run a full Megatest run in either the same
Megatest area or in another area. This is a powerful way of chaining
complex suites of tests and or actions.</p></div>
<div class="paragraph"><p>If you are not using the current area you can use ezsteps to retrieve
and setup the sub-Megatest run area.</p></div>
<div class="paragraph"><p>In the testconfig:</p></div>
<div class="listingblock">
<div class="content monospaced">
<pre>[subrun]

# Required: wait for the run or just launch it
#           if no then the run will be an automatic PASS irrespective of the actual result
runwait yes|no

# Optional: where to execute the run. Default is the current runarea
runarea /some/path/to/megatest/area

# Optional: method to use to determine pass/fail status of the run
#   auto (default) - roll up the net state/status of the sub-run
#   logpro         - use the provided logpro rules, happens automatically if there is a logpro section
# passfail auto|logpro
# Example of logpro:
passfail logpro

# Optional:
logpro ;; if this section exists then logpro is used to determine pass/fail
  (expect:required in "LogFileBody" &gt;= 1 "At least one pass" #/PASS/)

# Optional: target translator, default is to use the parent target
target #{shell somescript.sh}

# Optional: runname translator/generator, default is to use the parent runname
runname #{somescript.sh}

# Optional: testpatt spec, default is to first look for TESTPATT spec from runconfigs unless there is a contour spec
testpatt %/item1,test2

# Optional: contour spec, use the named contour from the megatest.config contour spec
contour contourname ### NOTE: Not implemented yet! Let us know if you need this feature.

# Optional: mode-patt, use this spec for testpatt from runconfigs
mode-patt TESTPATT

# Optional: tag-expr, use this tag-expr to select tests
tag-expr quick

# Optional: (not yet implemented), propagate these actions from the parent
#           test
#   Note// default is % for all
propagate remove-runs archive ...</pre>
</div></div>
</div>
</div>
<div class="sect1">
<h2 id="_programming_api">Programming API</h2>
<div class="sectionbody">
<div class="paragraph"><p>These routines can be called from the megatest repl.</p></div>
<table class="tableblock frame-topbot grid-all"
style="

</div>
</div>
</div>
<div id="footnotes"><hr></div>
<div id="footer">
<div id="footer-text">
Version 1.0<br>
Last updated 2017-08-30 10:42:37 PDT

</div>
</div>
</body>
</html>

------------------------------

Then in runconfigs.config

.Example of using modified.config in a testconfig
------------------------------
cat testconfig

[pre-launch-env-vars]
[include modified.config]
------------------------------

Managing Old Runs
-----------------

It is often desired to keep some older runs around but this must be balanced with the costs of disk space.

. Use -remove-keep
. Use -archive (can also be done from the -remove-keep interface)
. use -remove-runs with -keep-records

.For each target, remove all runs but the most recent 3 if they are over 1 week old
---------------------
# use -precmd 'sleep 5;nbfake' to limit overloading the host computer but to allow the removes to run in parallel.
megatest -actions print,remove-runs -remove-keep 3 -target %/%/%/% -runname % -age 1w -precmd 'sleep 5;nbfake'"
---------------------

Nested Runs
-----------

A Megatest test can run a full Megatest run in either the same
Megatest area or in another area. This is a powerful way of chaining
complex suites of tests and or actions.

If you are not using the current area you can use ezsteps to retrieve
and setup the sub-Megatest run area.

In the testconfig:
---------------
[subrun]

# Required: wait for the run or just launch it
#           if no then the run will be an automatic PASS irrespective of the actual result
runwait yes|no

# Optional: where to execute the run. Default is the current runarea
runarea /some/path/to/megatest/area

# Optional: method to use to determine pass/fail status of the run
#   auto (default) - roll up the net state/status of the sub-run
#   logpro         - use the provided logpro rules, happens automatically if there is a logpro section
# passfail auto|logpro
# Example of logpro:
passfail logpro

# Optional: 
logpro ;; if this section exists then logpro is used to determine pass/fail
  (expect:required in "LogFileBody" >= 1 "At least one pass" #/PASS/)
  (expect:fail     in "LogFileBody"  = 0 "No FAILs allowed"  #/FAIL/)

# Optional: target translator, default is to use the parent target
target #{shell somescript.sh}

# Optional: runname translator/generator, default is to use the parent runname
runname #{somescript.sh}

# Optional: testpatt spec, default is to first look for TESTPATT spec from runconfigs unless there is a contour spec
testpatt %/item1,test2

# Optional: contour spec, use the named contour from the megatest.config contour spec
contour contourname ### NOTE: Not implemented yet! Let us know if you need this feature.

# Optional: mode-patt, use this spec for testpatt from runconfigs
mode-patt TESTPATT

# Optional: tag-expr, use this tag-expr to select tests
tag-expr quick

# Optional: (not yet implemented), propagate these actions from the parent
#           test
#   Note// default is % for all
propagate remove-runs archive ...

---------------

Programming API
---------------

These routines can be called from the megatest repl. 

.API Keys Related Calls
[width="70%",cols="^,2m,2m,2m",frame="topbot",options="header,footer"]

;; BBnote - state status dashboard button color / text defined here
(define (gutils:get-color-for-state-status state status);; #!key (get-label #f))
  ;; ((if get-label cadr car)
  (case (string->symbol state)
    ((COMPLETED) ;; ARCHIVED)
     (case (string->symbol status)
       ((PASS)        (list "70  249 73" status))
       ((PREQ_FAIL PREQ_DISCARDED) (list "255 127 127" status))
       ((WARN WAIVED) (list "255 172 13" status))
       ((SKIP)        (list (gutils:get-color-spec 'SKIP) status))
       ((ABORT)       (list "198 36 166" status))
       (else (list "253 33 49" status))))
    ((ARCHIVED)
     (case (string->symbol status)
       ((PASS)        (list "70  170 73" status))

	   (status (conc (configf:lookup dat "final" "exit-status") ": " (if msg msg "no message")))
	   (else #f)))
	#f)))

(define (launch:runstep ezstep run-id test-id exit-info m tal testconfig)
  (let* ((stepname       (car ezstep))  ;; do stuff to run the step
	 (stepinfo       (cadr ezstep))
	;; (let ((info (cadr ezstep)))
	;; 		   (if (proc? info) "" info)))
	;; (stepproc       (let ((info (cadr ezstep)))
	;; 		   (if (proc? info) info #f)))
	 (stepparts      (string-match (regexp "^(\\{([^\\}\\{]*)\\}\\s*|)(.*)$") stepinfo))
	 (stepparams     (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each
	 (paramparts     (if (string? stepparams)
			     (map (lambda (x)(string-split x "=")) (string-split-fields "[^;]*=[^;]*" stepparams))
			     '()))
	 (subrun         (alist-ref "subrun" paramparts equal?))
	 (stepcmd        (list-ref stepparts 3))
	 (script         "") ; "#!/bin/bash\n") ;; yep, we depend on bin/bash FIXME!!!\
	 (logpro-file    (conc stepname ".logpro"))
	 (html-file      (conc stepname ".html"))
	 (dat-file       (conc stepname ".dat"))
	 (tconfig-logpro (configf:lookup testconfig "logpro" stepname))
	 (logpro-used    (common:file-exists? logpro-file)))

    (debug:print 0 *default-log-port* "stepparts: " stepparts ", stepparams: " stepparams
                 ", paramparts: " paramparts ", subrun: " subrun ", stepcmd: " stepcmd)
    
    (if (and tconfig-logpro
	     (not logpro-used)) ;; no logpro file found but have a defn in the testconfig
	(begin
	  (with-output-to-file logpro-file
	    (lambda ()
	      (print ";; logpro file extracted from testconfig\n"
		     ";;")
	      (print tconfig-logpro)))
	  (set! logpro-used #t)))
    
    ;; NB// can safely assume we are in test-area directory
    (debug:print 4 *default-log-port* "ezsteps:\n stepname: " stepname " stepinfo: " stepinfo " stepparts: " stepparts
		 " stepparams: " stepparams " stepcmd: " stepcmd)
    
    ;; ;; first source the previous environment
    ;; (let ((prev-env (conc ".ezsteps/" prevstep (if (string-search (regexp "csh") 
    ;;      							 (get-environment-variable "SHELL")) ".csh" ".sh"))))
    ;;   (if (and prevstep (common:file-exists? prev-env))
    ;;       (set! script (conc script "source " prev-env))))
    
    ;; call the command using mt_ezstep
    ;; (set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "x") " " stepcmd))
    
    (debug:print 4 *default-log-port* "script: " script)
    (rmt:teststep-set-status! run-id test-id stepname "start" "-" #f #f)
    ;; now launch the actual process
    (call-with-environment-variables 
     (list (cons "PATH" (conc (get-environment-variable "PATH") ":.")))
     (lambda () ;; (process-run "/bin/bash" "-c" "exec ls -l /tmp/foobar > /tmp/delme-more.log 2>&1")
       (let* ((cmd (conc stepcmd " > " stepname ".log 2>&1")) ;; >outfile 2>&1 
	      (pid #f))
	 (let ((proc (lambda ()
		       (set! pid (process-run "/bin/bash" (list "-c" cmd))))))
	   (if subrun
               (begin
                 (debug:print-info 0 *default-log-port* "Running without MT_.* environment variables.")
                 (common:without-vars proc "^MT_.*"))
	       (proc)))
	 
         (with-output-to-file "Makefile.ezsteps"
           (lambda ()
             (print stepname ".log :")
             (print "\t" cmd)
             (if (common:file-exists? (conc stepname ".logpro"))
                 (print "\tlogpro " stepname ".logpro " stepname ".html < " stepname ".log"))
             (print)

	 (tests:test-set-status! run-id test-id next-state "PASS" #f #f))
	(else ;; 'fail
	 (launch:einf-rollup-status-set! exit-info 1) ;; (vector-set! exit-info 3 1) ;; force fail, this used to be next-state but that doesn't make sense. should always be "COMPLETED" 
	 (tests:test-set-status! run-id test-id "COMPLETED" "FAIL" (conc "Failed at step " stepname) #f)
	 )))
    logpro-used))

(define (launch:manage-steps run-id test-id item-path fullrunscript ezsteps subrun test-name tconfigreg exit-info m)
  ;; (let-values
  ;;  (((pid exit-status exit-code)
  ;;    (run-n-wait fullrunscript)))
  ;; (tests:test-set-status! test-id "RUNNING" "n/a" #f #f)
  ;; Since we should have a clean slate at this time there is no need to do 
  ;; any of the other stuff that tests:test-set-status! does. Let's just 
  ;; force RUNNING/n/a

	   (if (eq? pid-val 0)
	       (begin
		 (thread-sleep! 2)
		 (loop (+ i 1)))
	       )))))
  ;; then, if runscript ran ok (or did not get called)
  ;; do all the ezsteps (if any)
  (if (or ezsteps subrun)
      (let* ((testconfig ;; (read-config (conc work-area "/testconfig") #f #t environ-patt: "pre-launch-env-vars")) ;; FIXME??? is allow-system ok here?
	      ;; NOTE: it is tempting to turn off force-create of testconfig but dynamic
	      ;;       ezstep names need a full re-eval here.
	      (tests:get-testconfig test-name item-path tconfigreg #t force-create: #t)) ;; 'return-procs)))
	     (ezstepslst (if (hash-table? testconfig)
			     (hash-table-ref/default testconfig "ezsteps" '())
			     #f)))
	(if testconfig
	    (hash-table-set! *testconfigs* test-name testconfig) ;; cached for lazy reads later ...
	    (begin
	      (launch:setup)
	      (debug:print 0 *default-log-port* "WARNING: no testconfig found for " test-name " in search path:\n  "
			   (string-intersperse (tests:get-tests-search-path *configdat*) "\n  "))))
	;; after all that, still no testconfig? Time to abort
	(if (not testconfig)
	    (begin
	      (debug:print-error 0 *default-log-port* "Failed to resolve megatest.config, runconfigs.config and testconfig issues. Giving up now")
	      (exit 1)))

	;; create a proc for the subrun if requested, save that proc in the ezsteps table as the last entry
	;; 1. get section [runarun]
	;; 2. unset MT_* vars
	;; 3. fix target
	;; 4. fix runname
	;; 5. fix testpatt or calculate it from contour
	;; 6. launch the run
	;; 7. roll up the run result and or roll up the logpro processed result
	(if (configf:lookup testconfig "subrun" "runwait") ;; we use runwait as the flag that a subrun is requested
	    (let* ((runarea   (configf:lookup testconfig "subrun" "runarea"))
		   (passfail  (configf:lookup testconfig "subrun" "passfail"))
		   (target    (configf:lookup testconfig "subrun" "target"))
		   (runname   (configf:lookup testconfig "subrun" "runname"))
		   (contour   (configf:lookup testconfig "subrun" "contour"))
		   (testpatt  (configf:lookup testconfig "subrun" "testpatt"))
		   (mode-patt (configf:lookup testconfig "subrun" "mode-patt"))
		   (tag-expr  (configf:lookup testconfig "subrun" "tag-expr"))
		   (run-wait  (configf:lookup testconfig "subrun" "runwait"))
		   (logpro    (configf:lookup testconfig "subrun" "logpro"))
		   (compact-stem (string-substitute "[/*]" "_" (conc target "-" runname "-" (or testpatt mode-patt tag-expr))))
		   (log-file (conc compact-stem ".log"))
		   (mt-cmd    (conc "megatest -run -target " target
				    " -runname " (or runname (get-environment-variable "MT_RUNNAME"))
				    (conc " -start-dir " (if runarea runarea *toppath*))
				    (if testpatt  (conc " -testpatt " testpatt)  "")
				    (if mode-patt (conc " -modepatt " mode-patt) "")
				    (if tag-expr  (conc " -tag-expr"  tag-expr)  "")
				    (if (equal? run-wait "yes") " -run-wait " "")
				    " -log " log-file)))
	      ;; change directory to runarea, create it if needed, we do NOT create the directory 
	;; (if runarea
	;;     (if (directory-exists? runarea)
	;;         (change-directory runarea)
	;;         (begin
	;;   	(debug:print 0 *default-log-port* "ERROR: for sub-megatest run the runarea \"" runarea "\" does not exist! EXITING.")
	;;   	(exit 1))))
	      ;; (let ((subrun (conc *toppath* "/subrun") #t))
	      ;; 	 (create-directory subrun)
	      ;; 	 (change-directory subrun)))
	      
	      ;; by this point we are in the right place to run the subrun and we have a Megatest command to run
	      ;; (filter (lambda (x)(string-match "MT_.*" (car x))) (get-environment-variables))
	      ;; (common:without-vars mt-cmd "^MT_.*")
              (debug:print-info 0 *default-log-port* "Subrun command is \"" mt-cmd "\"")
              (set! ezsteps #t) ;; set the needed flag
	      (set! ezstepslst (append (or ezstepslst '())
                                       (list (list "subrun" (conc "{subrun=true} " mt-cmd)))))
	      (configf:set-section-var testconfig "logpro" "subrun" logpro) ;; append the logpro rules to the logpro section as stepname subrun
              (if runarea (configf:set-section-var testconfig "setup" "submegatest" runarea))
              (configf:write-alist testconfig "testconfig.subrun")
	      ))

	;; process the ezsteps
	(if ezsteps
	    (begin
	      (if (not (common:file-exists? ".ezsteps"))(create-directory ".ezsteps"))
	      ;; if ezsteps was defined then we are sure to have at least one step but check anyway
	      (if (not (> (length ezstepslst) 0))
		  (debug:print-error 0 *default-log-port* "ezsteps defined but ezstepslst is zero length")
		  (let loop ((ezstep (car ezstepslst))
			     (tal    (cdr ezstepslst))
			     (prevstep #f))
                    (debug:print-info 0 *default-log-port* "Processing ezstep \"" (string-intersperse ezstep " ") "\"")
		    ;; check exit-info (vector-ref exit-info 1)
		    (if (launch:einf-exit-status exit-info) ;; (vector-ref exit-info 1)
			(let ((logpro-used (launch:runstep ezstep run-id test-id exit-info m tal testconfig))
			      (stepname    (car ezstep)))
			  ;; if logpro-used read in the stepname.dat file
			  (if (and logpro-used (common:file-exists? (conc stepname ".dat")))
			      (launch:load-logpro-dat run-id test-id stepname))
			  (if (steprun-good? logpro-used (launch:einf-exit-code exit-info))
			      (if (not (null? tal))
				  (loop (car tal) (cdr tal) stepname))
			      (debug:print 0 *default-log-port* "WARNING: step " (car ezstep) " failed. Stopping")))
			(debug:print 0 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))))))))

(define (launch:monitor-job run-id test-id item-path fullrunscript ezsteps test-name tconfigreg exit-info m work-area runtlim misc-flags)
  (let* ((update-period (string->number (or (configf:lookup *configdat* "setup" "test-stats-update-period") "30")))
         (start-seconds (current-seconds))
	 (calc-minutes  (lambda ()
			  (inexact->exact 
			   (round 

	;; (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
	(let* ((testpath  (assoc/default 'testpath  cmdinfo))  ;; testpath is the test spec area
	       (top-path  (assoc/default 'toppath   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))  ;; work-area is the test run area
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (ezsteps   (assoc/default 'ezsteps   cmdinfo))
	       (subrun    (assoc/default 'subrun    cmdinfo))
	       ;; (runremote (assoc/default 'runremote cmdinfo))
	       ;; (transport (assoc/default 'transport cmdinfo))  ;; not used
	       ;; (serverinf (assoc/default 'serverinf cmdinfo))
	       ;; (port      (assoc/default 'port      cmdinfo))
	       (serverurl (assoc/default 'serverurl cmdinfo))
	       (homehost  (assoc/default 'homehost  cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))

	  (setenv "MT_RUN_AREA_HOME" top-path)
	  (set! *toppath* top-path)
          (change-directory *toppath*) ;; temporarily switch to the run area home
	  (setenv "MT_TEST_RUN_DIR"  work-area)

	  (launch:setup) ;; should be properly in the run area home now
          
	  (set! tconfigreg (tests:get-all)) ;; mapping of testname => test source path
	  (let ((sighand (lambda (signum)
			   ;; (signal-mask! signum) ;; to mask or not? seems to cause issues in exiting
			   (if (eq? signum signal/stop)
			       (debug:print-error 0 *default-log-port* "attempt to STOP process. Exiting."))
			   (set! *time-to-exit* #t)
			   (print "Received signal " signum ", cleaning up before exit. Please wait...")
			   (let ((th1 (make-thread (lambda ()

	  ;;    BUG? BUG? BUG?
	  
	  (let ((rconfig (full-runconfigs-read)) ;; (read-config (conc  *toppath* "/runconfigs.config") #f #t sections: (list "default" target))))
		(wconfig (read-config "waivers.config" #f #t sections: `( "default" ,target )))) ;; read the waivers config if it exists
	    ;; (setup-env-defaults (conc *toppath* "/runconfigs.config") run-id (make-hash-table) keyvals target)
	    ;; (set-run-config-vars run-id keyvals target) ;; (db:get-target db run-id))
	    ;; Now have runconfigs data loaded, set environment vars
	    (for-each
	     (lambda (section)
	       (for-each
		(lambda (varval)
		  (let ((var (car varval))
			(val (cadr varval)))
		    (if (and (string? var)(string? val))
			(begin
			  (setenv var (config:eval-string-in-environment val))) ;; val)
			(debug:print-error 0 *default-log-port* "bad variable spec, " var "=" val))))
		(configf:get-section rconfig section)))
	     (list "default" target)))
          ;;(bb-check-path msg: "launch:execute post block 1")

	  ;; NFS might not have propagated the directory meta data to the run host - give it time if needed
	  (let loop ((count 0))
	    (if (or (common:file-exists? work-area)
		    (> count 10))
		(change-directory work-area)

		 (exit-info    (make-launch:einf pid: #t exit-status: #t exit-code: #t rollup-status: 0)) ;; pid exit-status exit-code (i.e. process was successfully run) rollup-status
		 (job-thread   #f)
		 ;; (keep-going   #t)
		 (misc-flags   (let ((ht (make-hash-table)))
				 (hash-table-set! ht 'keep-going #t)
				 ht))
		 (runit        (lambda ()
				 (launch:manage-steps run-id test-id item-path fullrunscript ezsteps subrun test-name tconfigreg exit-info m)))
		 (monitorjob   (lambda ()
				 (launch:monitor-job  run-id test-id item-path fullrunscript ezsteps test-name tconfigreg exit-info m work-area runtlim misc-flags)))
		 (th1          (make-thread monitorjob "monitor job"))
		 (th2          (make-thread runit "run job")))
	    (set! job-thread th2)
	    (thread-start! th1)
	    (thread-start! th2)

	      #f))
	
        ;; one more attempt to cache the configs for future reading
        (let* ((cachefiles   (launch:get-cache-file-paths areapath toppath target mtconfig))
               (mtcachef     (car cachefiles))
               (rccachef     (cdr cachefiles)))

          ;; trap exception due to stale NFS handle -- Error: (open-output-file) cannot open file - Stale NFS file handle: "...somepath.../.runconfigs.cfg-1.6427-7d1e789cb3f62f9cde719a4865bb51b3c17ea853" - ticket 220546342
          ;; TODO - consider 1) using simple-lock to bracket cache write
          ;;                 2) cache in hash on server, since need to do rmt: anyway to lock.
          (if (and rccachef *runconfigdat* (not (common:file-exists? rccachef)))
              (common:fail-safe
               (lambda ()
                 (configf:write-alist *runconfigdat* rccachef))
               (conc "Could not write cache file - "rccachef))

	   (useshell        (let ((ush (config-lookup *configdat* "jobtools"     "useshell")))
			      (if ush 
				  (if (equal? ush "no") ;; must use "no" to NOT use shell
				      #f
				      ush)
				  #t)))     ;; default is yes
	   (runscript       (config-lookup tconfig   "setup"        "runscript"))
	   (ezsteps         (> (length (hash-table-ref/default tconfig "ezsteps" '())) 0)) ;; don't send all the steps, could be big, just send a flag
	   (subrun          (> (length (hash-table-ref/default tconfig "subrun"  '())) 0)) ;; send a flag to process a subrun
	   ;; (diskspace       (config-lookup tconfig   "requirements" "diskspace"))
	   ;; (memory          (config-lookup tconfig   "requirements" "memory"))
	   ;; (hosts           (config-lookup *configdat* "jobtools"     "workhosts")) ;; I'm pretty sure this was never completed
	   (remote-megatest (config-lookup *configdat* "setup" "executable"))
	   (run-time-limit  (or (configf:lookup  tconfig   "requirements" "runtimelim")
				(configf:lookup  *configdat* "setup" "runtimelim")))
	   ;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to 

					(list 'test-name test-name) 
					(list 'runscript runscript) 
					(list 'run-id    run-id   )
					(list 'test-id   test-id  )
					;; (list 'item-path item-path )
					(list 'itemdat   itemdat  )
					(list 'megatest  remote-megatest)
					(list 'ezsteps   ezsteps)
					(list 'subrun    subrun)
					(list 'target    mt_target)
					(list 'contour   contour)
					(list 'runtlim   (if run-time-limit (common:hms-string->seconds run-time-limit) #f))
					(list 'env-ovrd  (hash-table-ref/default *configdat* "env-override" '())) 
					(list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
					(list 'runname   runname)
					(list 'mt-bindir-path mt-bindir-path))))))))

fullrun   path=tests/fullrun; 
# targtrans is name of scheme proc stored in .mtutil.scm, which lives in PWD where mtutil is run
#           the target translator can return: a/target OR (list/of targets/to apply/run) OR #f i.e. run nothing
# ext-tests path=ext-tests; targtrans=prefix-contour;
ext       path=ext-tests

[contours]
#     selector=tag-expr/mode-patt
quick areas=ext;    selector=/QUICKPATT
quick2 areafn=check-area; selector=/QUICKPATT
# quick areas=fullrun,ext-tests; selector=QUICKPATT/quick
# full  areas=fullrun,ext-tests; selector=MAXPATT/
# short areas=fullrun,ext-tests; selector=MAXPATT/
# all   areas=fullrun,ext-tests
# snazy selector=QUICKPATT/

       "-runall"
       "run all tests"
       (lambda (target runname keys keyvals)
         (if (args:get-arg "-rerun-clean") ;; first set states/statuses correct
             (let ((states   (or (configf:lookup *configdat* "validvalues" "cleanrerun-states")
                                 "KILLREQ,KILLED,UNKNOWN,INCOMPLETE,STUCK,NOT_STARTED"))
                   (statuses (or (configf:lookup *configdat* "validvalues" "cleanrerun-statuses")
                                 "FAIL,INCOMPLETE,ABORT,CHECK,DEAD,PREQ_FAIL,PREQ_DISCARDED")))
               (hash-table-set! args:arg-hash "-preclean" #t)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                state:  states
                                ;; status: statuses

  ;; Take advantage of a good place to exit if running the one-pass methodology
  (if (and (> (runs:dat-can-run-more-tests-count runsdat) 20)
	   (args:get-arg "-one-pass"))
      (exit 0))
  (thread-sleep! (cond
        	  ((> (runs:dat-can-run-more-tests-count runsdat) 20)
		   (if (runs:lownoise "waiting on tasks" 60)(debug:print-info 2 *default-log-port* "waiting for tasks to complete, sleeping briefly ..."))
                   (configf:lookup-number *configdat* "setup" "inter-test-delay" default: 0.1) ;; was 2
		   );; obviously haven't had any work to do for a while
        	  (else 0)))
  (let* ((num-running             (rmt:get-count-tests-running run-id))
	 (num-running-in-jobgroup (rmt:get-count-tests-running-in-jobgroup run-id jobgroup))
	 (job-group-limit         (let ((jobg-count (config-lookup *configdat* "jobgroups" jobgroup)))
				    (if (string? jobg-count)
					(string->number jobg-count)
					jobg-count))))

	       (if (and waiton (not (member waiton test-names)))
		   (let* ((waiton-record   (hash-table-ref/default test-records waiton #f))
			  (waiton-tconfig  (if waiton-record (vector-ref waiton-record 1) #f))
			  (waiton-itemized (and waiton-tconfig
						(or (hash-table-ref/default waiton-tconfig "items" #f)
						    (hash-table-ref/default waiton-tconfig "itemstable" #f))))
			  (itemmaps        (tests:get-itemmaps config))  ;; (configf:lookup config "requirements" "itemmap"))
			  (new-test-patts  (tests:extend-test-patts test-patts hed waiton itemmaps))) ;; BB: items expanded here
		     (debug:print-info 0 *default-log-port* "Test " waiton " has " (if waiton-record "a" "no") " waiton-record and" (if waiton-itemized " " " no ") "items")
		     ;; need to account for test-patt here, if I am test "a", selected with a test-patt of "hed/b%"
		     ;; and we are waiting on "waiton" we need to add "waiton/,waiton/b%" to test-patt
		     ;; is this satisfied by merely appending "/" to the waiton name added to the list?
		     ;;
		     ;; This approach causes all of the items in an upstream test to be run 

;;   loop with (car reg) tal (cdr reg) reruns
;; If tal is empty
;;   but have items in reg; loop with (car reg)(cdr reg) '() reruns
;;   If reg is empty => all done

(define (runs:queue-next-hed tal reg n regfull)
  (if regfull
      (if (null? reg) #f (car reg))
      (if (null? tal) ;; tal is used up, pop from reg
	  (if (null? reg) #f (car reg))
	  (car tal))))

(define (runs:queue-next-tal tal reg n regfull)
  (if regfull
      tal
      (if (null? tal) ;; must transfer from reg
	  (if (null? reg) '() (cdr reg))
	  (cdr tal))))

(define (runs:queue-next-reg tal reg n regfull)
  (if regfull
      (if (null? reg) '() (cdr reg))
      (if (null? tal) ;; if tal is null and reg not full then '() as reg contents moved to tal
	  '()
	  reg)))

;; this is the list of parameters to the named loop "loop" near the top of runs:run-tests-queue, look around line 1216
;;
(define (runs:loop-values tal reg reglen regfull reruns)
  (list (runs:queue-next-hed tal reg reglen regfull)      ;; hed
        (runs:queue-next-tal tal reg reglen regfull)      ;; tal
        (runs:queue-next-reg tal reg reglen regfull)      ;; reg
        reruns))                                          ;; reruns

;; objective - iterate thru tests
;;    => want to prioritize tests we haven't seen before
;;    => sometimes need to squeeze things in (added to reg)
;;    => review of a previously seen test is higher priority of never visited test
;; reg - list of previously visited tests
;; tal - list of never visited tests
;;   prefer next hed to be from reg than tal.

(define runs:nothing-left-in-queue-count 0)

;; return value of runs:expand-items is passed back to runs-tests-queue and is fed to named loop with this signature:
;;    (let loop ((hed         (car sorted-test-names))
;;	         (tal         (cdr sorted-test-names))
;;	         (reg         '()) ;; registered, put these at the head of tal 
;;	         (reruns      '()))
;; BB: for future reference - suspect target vars are not expanded to env vars at this point (item expansion using [items]\nwhatever [system echo $TARGETVAR] doesnt work right whereas [system echo #{targetvar}] does.. Tal and Randy have tix on this.  on first pass, var not set, on second pass, ok.  
(define (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmaps)
  (let* ((loop-list       (list hed tal reg reruns))
	 (prereqs-not-met (let ((res (rmt:get-prereqs-not-met run-id waitons hed item-path mode: testmode itemmaps: itemmaps)))
			    (if (list? res)
				res
				(begin
				  (debug:print 0 *default-log-port*
					       "ERROR: rmt:get-prereqs-not-met returned non-list!\n"
					       "  res=" res " run-id=" run-id " waitons=" waitons " hed=" hed " item-path=" item-path " testmode=" testmode " itemmaps=" itemmaps)
				  '()))))
         (have-itemized (not (null? (lset-intersection eq? testmode '(itemmatch itemwait)))))
	 ;; (prereqs-not-met (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails           (runs:calc-fails prereqs-not-met))
	 (prereq-fails    (runs:calc-prereq-fail prereqs-not-met))
	 (non-completed   (runs:calc-not-completed prereqs-not-met))
	 (runnables       (runs:calc-runnable prereqs-not-met))
         (unexpanded-prereqs
          (filter (lambda (testname)
                    (let* ((test-rec (hash-table-ref test-records testname))
                           (items       (tests:testqueue-get-items  test-rec)))
                      ;;(BB> "HEY " testname "=>"items)
                      (or (procedure? items)(eq? items 'have-procedure))))
                  waitons))


         )
    (debug:print-info 4 *default-log-port* "START OF INNER COND #2 "
		      "\n can-run-more:    " can-run-more
		      "\n testname:        " hed
		      "\n prereqs-not-met: " (runs:pretty-string prereqs-not-met)
		      "\n non-completed:   " (runs:pretty-string non-completed) 
		      "\n prereq-fails:    " (runs:pretty-string prereq-fails)
		      "\n fails:           " (runs:pretty-string fails)

	    (if (> runs:nothing-left-in-queue-count 2)
		(begin
		  (debug:print 0 *default-log-port* "WARNING: this condition is triggered when there were no items to expand and nothing to run. Please check your run for completeness")
		  (exit 0))
		(set! runs:nothing-left-in-queue-count (+ runs:nothing-left-in-queue-count 1)))
	    #f)))

     ;; desired result of below cond branch:
     ;;   we want to expand items in our test of interest (hed) in the following cases:
     ;;    case 1 - mode is itemmatch or itemwait: 
     ;;       - all prereq tests have been expanded
     ;;       - at least one prereq's items have completed
     ;;    case 2 - mode is toplevel   
     ;;       - prereqs are completed.
     ;;       - or no prereqs can complete 
     ;;    case 3 - mode not specified 
     ;;       - prereqs are completed and passed (we could consider removing "and passed" -- it would change behavior from current)          
     ((or (null? prereqs-not-met)
	  (and (member 'toplevel testmode)
	       (null? non-completed)))
      (debug:print-info 4 *default-log-port* "runs:expand-items: (or (null? prereqs-not-met) (and (member 'toplevel testmode)(null? non-completed)))")
      (let ((test-name (tests:testqueue-get-testname test-record)))
	(setenv "MT_TEST_NAME" test-name) ;; 
	(setenv "MT_RUNNAME"   runname)

	(if (and give-up
		 (not (and (null? tal)(null? reg))))
	    (let ((trimmed-tal (mt:discard-blocked-tests run-id hed tal test-records))
		  (trimmed-reg (mt:discard-blocked-tests run-id hed reg test-records)))
	      (debug:print 1 *default-log-port* "WARNING: test " hed " has discarded prerequisites, removing it from the queue")

	      (let ((test-id (rmt:get-test-id run-id hed "")))
		(if test-id (mt:test-set-state-status-by-id run-id test-id "COMPLETED" "PREQ_DISCARDED" "Failed to run due to discarded prerequisites")))
	      
	      (if (and (null? trimmed-tal)
		       (null? trimmed-reg))
		  #f
                  (runs:loop-values trimmed-tal trimmed-reg reglen regfull reruns)
                  ))
	      (list (car newtal)(append (cdr newtal) reg) '() reruns))))

       (member 'normal testmode))
      (debug:print-info 1 *default-log-port* "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
			(string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
			", removing it from to-do list")
      (let ((test-id (rmt:get-test-id run-id hed "")))
	(if test-id
	    (if (not (null? prereq-fails))
		(mt:test-set-state-status-by-id run-id test-id "COMPLETED" "PREQ_DISCARDED" "Failed to run due to prior failed prerequisites")
		(mt:test-set-state-status-by-id run-id test-id "COMPLETED" "PREQ_FAIL"      "Failed to run due to failed prerequisites"))))
      ;; (debug:print 4 *default-log-port*"BB> set PREQ_FAIL on "hed)
      ;; (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_FAIL"      "Failed to run due to failed prerequisites")))) ;; BB: this works, btu equivalent for itemwait mode does not work.
      (if (or (not (null? reg))(not (null? tal)))
	  (begin
	    (hash-table-set! test-registry hed 'CANNOTRUN)
            (runs:loop-values tal reg reglen regfull (cons hed reruns))
            )
	  #f)) ;; #f flags do not loop
      
     ((and (not (null? fails))(member 'toplevel testmode))
      (if (or (not (null? reg))(not (null? tal)))
	   (list (car newtal)(append (cdr newtal) reg) '() reruns)
	  #f)) 
     ((null? runnables) #f) ;; if we get here and non-completed is null then it is all over.
     (else
      (debug:print 0 *default-log-port* "WARNING: FAILS or incomplete tests maybe preventing completion of this run. Watch for issues with test " hed ", continuing for now")

	 (have-resources         (car run-limits-info))
	 (num-running            (list-ref run-limits-info 1))
	 (num-running-in-jobgroup(list-ref run-limits-info 2)) 
	 (max-concurrent-jobs    (list-ref run-limits-info 3))
	 (job-group-limit        (list-ref run-limits-info 4))
	 ;; (prereqs-not-met        (rmt:get-prereqs-not-met run-id waitons hed item-path mode: testmode itemmaps: itemmaps))
	 ;; (prereqs-not-met         (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails                  (if (list? prereqs-not-met) ;; TODO: rename fails to failed-prereqs
				      (runs:calc-fails prereqs-not-met)
				      (begin
					(debug:print-error 0 *default-log-port* "prereqs-not-met is not a list! " prereqs-not-met)
					'())))
	 (non-completed           (filter (lambda (x)             ;; remove hed from not completed list, duh, of course it is not completed!
					    (not (equal? x hed)))
					  (runs:calc-not-completed prereqs-not-met)))

	  (begin
	    ;; couldn't run, take a breather
	    (if  (runs:lownoise "Waiting for more work to do..." 60)
		 (debug:print-info 0 *default-log-port* "Waiting for more work to do..."))
	    (thread-sleep! 1)
	    (list (car newtal)(cdr newtal) reg reruns))
	  ;; the waiton is FAIL so no point in trying to run hed ever again
	  (begin
            (let ((my-test-id (rmt:get-test-id run-id test-name item-path)))
              (mt:test-set-state-status-by-id run-id my-test-id "COMPLETED" "PREQ_FAIL" "Failed to run due to failed prerequisites2"))


            
            (if (or (not (null? reg))(not (null? tal)))
                (if (vector? hed)
		  (begin
		    (debug:print 1 *default-log-port* "WARNING: Dropping test " test-name "/" item-path
				 " from the launch list as it has prerequistes that are FAIL")
		    (let ((test-id (rmt:get-test-id run-id hed "")))
		      (if test-id (mt:test-set-state-status-by-id run-id test-id "COMPLETED" "PREQ_FAIL" "Failed to run due to failed prerequisites")))
		    (runs:shrink-can-run-more-tests-count runsdat) ;; DELAY TWEAKER (still needed?)
		    ;; (thread-sleep! *global-delta*)
		    ;; This next is for the items

                    (if (not (null? fails))
                        ;;(mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "PREQ_FAIL" #f)
                        (rmt:set-state-status-and-roll-up-items run-id test-name item-path "NOT_STARTED" "PREQ_FAIL" #f) 
                        ;;(mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "BLOCKED" #f)
                        (rmt:set-state-status-and-roll-up-items run-id test-name item-path "NOT_STARTED" "BLOCKED" #f) )
		    (hash-table-set! test-registry (db:test-make-full-name test-name item-path) 'removed)
		    (runs:loop-values tal reg reglen regfull reruns))
		  (let ((nth-try (hash-table-ref/default test-registry hed 0))) ;; hed not a vector...
                    (debug:print 2 *default-log-port* "nth-try("hed")="nth-try)
		    (cond
		     ((member "RUNNING" (map db:test-get-state prereqs-not-met))
		      (if (runs:lownoise (conc "possible RUNNING prerequistes " hed) 60)
			  (debug:print 0 *default-log-port* "WARNING: test " hed " has possible RUNNING prerequisites, don't give up on it yet."))
		      (thread-sleep! 0.1)
		      (runs:loop-values tal reg reglen regfull reruns))
		     ((or (not nth-try) ;; BB: condition on subsequent tries, condition below fires on first try 
			  (and (number? nth-try)
			       (< nth-try 2)))
		      (hash-table-set! test-registry hed (if (number? nth-try)
							     (+ nth-try 1)
							     0))
		      (if (runs:lownoise (conc "not removing test " hed) 60)
			  (debug:print 1 *default-log-port* "WARNING: not removing test " hed " from queue although it may not be runnable due to FAILED prerequisites"))
		      ;; may not have processed correctly. Could be a race condition in your test implementation? Dropping test " hed) ;;  " as it has prerequistes that are FAIL. (NOTE: hed is not a vector)")
		      (runs:shrink-can-run-more-tests-count runsdat) ;; DELAY TWEAKER (still needed?)
		      (runs:loop-values newtal reg reglen regfull reruns))
		     ((symbol? nth-try) ;; BB: 'done matches here in one case where prereq itemwait failed.  This is first "try"
		      (if (eq? nth-try 'removed) ;; removed is removed - drop it NOW
			  (if (null? tal)
			      #f ;; yes, really
			      (list (car tal)(cdr tal) reg reruns))
			  (begin
			    (if (runs:lownoise (conc "FAILED prerequisites or other issue" hed) 60)
				(debug:print 0 *default-log-port* "WARNING: test " hed " has FAILED prerequisites or other issue. Internal state >" nth-try "< will be overridden and we'll retry."))
			    ;; was: (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "KEEP_TRYING" #f)
                            (mt:test-set-state-status-by-testname run-id test-name item-path "COMPLETED" "PREQ_FAIL" #f)
			    (hash-table-set! test-registry hed 'removed) ;; was 0
                            (if (not (and (null? reg) (null? tal)))
                                (runs:loop-values tal reg reglen regfull reruns)
                                #f))))
		     (else
		      (if (runs:lownoise (conc "FAILED prerequitests and we tried" hed) 60)
			  (debug:print 0 *default-log-port* "WARNING: test " hed " has FAILED prerequitests and we've tried at least 10 times to run it. Giving up now."))
		      ;; (debug:print 0 *default-log-port* "         prereqs: " prereqs-not-met)
		      (hash-table-set! test-registry hed 'removed)
		      (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "TEN_STRIKES" #f)
		      ;; I'm unclear on if this roll up is needed - it may be the root cause of the "all set to FAIL" bug.
		      (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "FAIL" #f) ;; treat as FAIL
		      (list (if (null? tal)(car newtal)(car tal))
			    tal
			    reg
			    reruns)))))
	      ;; ELSE: can't drop this - maybe running? Just keep trying

                ;;(if (not (or (not (null? reg))(not (null? tal)))) ;; old experiment
                (let ((runable-tests (runs:runable-tests prereqs-not-met))) ;; SUSPICIOUS: Should look at more than just prereqs-not-met?
                  (if (null? runable-tests)
                      #f   ;; I think we are truly done here
                      (runs:loop-values newtal reg reglen regfull reruns)))
                ;;) ;;from old experiment
            ) ;; end if (or (not (null? reg))(not (null? tal)))
            ))))))

;; scan a list of tests looking to see if any are potentially runnable
;;
(define (runs:runable-tests tests)
  (filter (lambda (t)
	    (if (not (vector? t))
		t

	 ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	 ;;    - but only do that if resources exist to kick off the job
	 ;; EXPAND ITEMS
	 ((or (procedure? items)(eq? items 'have-procedure)) ;; BB - target vars are env vars here? to allow expansion of [items]\nsomething [system echo $SOMETARGVAR], which is wonky
	  (let ((can-run-more    (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs)))
	    (if (and (list? can-run-more)
		     (car can-run-more))
		(let ((loop-list (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmaps))) ;; itemized test expanded here
		  (if loop-list
		      (apply loop loop-list)))
		;; if can't run more just loop with next possible test
		(loop (car newtal)(cdr newtal) reg reruns))))
	    
	 ;; this case should not happen, added to help catch any bugs
	 ((and (list? items) itemdat)

    ;; we get here on "drop through". All done!
    (runs:run-post-hook run-id)
    (debug:print-info 1 *default-log-port* "All tests launched")))

(define (runs:calc-fails prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (member (db:test-get-state test) '("INCOMPLETE" "COMPLETED")) ;; TODO: pull from *common:stuff...*
		 (not (member (db:test-get-status test)
			      '("PASS" "WARN" "CHECK" "WAIVED" "SKIP")))))
	  prereqs-not-met))

(define (runs:calc-prereq-fail prereqs-not-met) ;; REMOVEME since NOT_STARTED/PREQ_FAIL is now COMPLETED/PREQ_FAIL
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (equal? (db:test-get-state test) "NOT_STARTED")
		 (not (member (db:test-get-status test)
			      '("n/a" "KEEP_TRYING")))))
	  prereqs-not-met))

(declare (unit server))

(declare (uses common))
(declare (uses db))
(declare (uses tasks)) ;; tasks are where stuff is maintained about what is running.
;; (declare (uses synchash))
(declare (uses http-transport))
;;(declare (uses rpc-transport))
(declare (uses launch))
(declare (uses daemon))

(include "common_records.scm")
(include "db_records.scm")

(define (server:make-server-url hostport)

;;
;; start_server
;;
(define (server:launch run-id transport-type)
  (case transport-type
    ((http)(http-transport:launch))
    ;;((nmsg)(nmsg-transport:launch run-id))
    ;;((rpc)  (rpc-transport:launch run-id))
    (else (debug:print-error 0 *default-log-port* "unknown server type " transport-type))))

;;======================================================================
;; S E R V E R   U T I L I T I E S 
;;======================================================================

;; Get the transport

	CDVER=5.11.1
	IUPVER=3.22
	IMVER=3.12
        CHICKEN_VERSION=4.12.0
        CHICKEN_BASEVER=4.12.0
	;;
SUSE_LINUX_11-x86_64-std)
	KTYPE=26g4 
	CDVER=5.11.1
	IUPVER=3.22
	IMVER=3.12














































































  >> $PREFIX/setup-chicken4x.sh

echo "export CHICKEN_DOC_PAGER=cat" >> $PREFIX/setup-chicken4x.sh

echo "setenv PATH $PREFIX/bin:\$PATH" > $PREFIX/setup-chicken4x.csh
echo "setenv LD_LIBRARY_PATH $LD_LIBRARY_PATH:\$LD_LIBRARY_PATH" >> $PREFIX/setup-chicken4x.csh
echo "setenv CHICKEN_DOC_PAGER cat" >> $PREFIX/setup-chicken4x.csh

echo PATH=$PATH