Megatest

(define (configf:section-vars cfgdat section)
  (let ((sectdat (hash-table-ref/default cfgdat section '())))
    (if (null? sectdat)
	'()
	(map car sectdat))))

(define (configf:get-section cfdat section)
  (hash-table-ref/default cfgdat section '()))

(define (setup)
  (let* ((configf (find-config))
	 (config  (if configf (read-config configf #f #t) #f)))
    (if config
	(setenv "RUN_AREA_HOME" (pathname-directory configf)))
    config))

		   logf test-id)
      (debug:print 0 "ERROR: db:test-set-log! called with non-string log file name " logf)))

;;======================================================================
;; Misc. test related queries
;;======================================================================

(define (db:test-get-paths-matching db keynames target)
(define (db:test-get-paths-matching db keynames target fnamepatt #!key (res '()))
  (let* ((res '())
	 (itempatt   (if (args:get-arg "-itempatt")(args:get-arg "-itempatt") "%"))
  (let* ((itempatt   (if (args:get-arg "-itempatt")(args:get-arg "-itempatt") "%"))
	 (testpatt   (if (args:get-arg "-testpatt")(args:get-arg "-testpatt") "%"))
	 (statepatt  (if (args:get-arg ":state")   (args:get-arg ":state")    "%"))
	 (statuspatt (if (args:get-arg ":status")  (args:get-arg ":status")   "%"))
	 (runname    (if (args:get-arg ":runname") (args:get-arg ":runname")  "%"))
	 (keystr (string-intersperse 
		  (map (lambda (key val)
			 (conc "r." key " like '" val "'"))
		       keynames 
		       (string-split target "/"))
		  " AND "))
	 (qrystr (conc "SELECT t.rundir FROM tests AS t INNER JOIN runs AS r ON t.run_id=r.id WHERE "
		       keystr " AND r.runname LIKE '" runname "' AND item_path LIKE '" itempatt "' AND testname LIKE '"
		       testpatt "' AND t.state LIKE '" statepatt "' AND t.status LIKE '" statuspatt 
		       "'ORDER BY t.event_time ASC;")))
    (debug:print 3 "qrystr: " qrystr)
    (sqlite3:for-each-row 
     (lambda (p)
       (set! res (cons p res)))
     db 
     qrystr)
    (if fnamepatt
	(apply append 
	       (map (lambda (p)
		      (glob (conc p "/" fnamepatt)))
    res))
		    res))
	res)))

;; look through tests from matching runs for a file
(define (db:test-get-first-path-matching db keynames target fname)
  ;; [refpaths] is the section where references to other megatest databases are stored
  (let ((mt-paths (configf:get-section "refpaths"))
	(res       (db:test-get-paths-matching db keynames target fname)))
    (let loop ((pathdat (if (null? paths) #f (car mt-paths)))
	       (tal     (if (null? paths) '()(cdr mt-paths))))
      (if (not (null? res))
	  (car res) ;; return first found
	  (if path
	      (let* ((db     (open-db path: (cadr pathdat)))
		     (newres (db:test-get-paths-matching db keynames target fname)))
		(debug:print 4 "INFO: Trying " (car pathdat) " at " (cadr pathdat))
		(sqlite3:finalize! db)
		(if (not (null? newres))
		    (car newres)
		    (if (null? tal)
			#f
			(loop (car tal)(cdr tal))))))))))


(define (db:test-get-test-records-matching db keynames target)
  (let* ((res '())
	 (itempatt   (if (args:get-arg "-itempatt")(args:get-arg "-itempatt") "%"))
	 (testpatt   (if (args:get-arg "-testpatt")(args:get-arg "-testpatt") "%"))
	 (statepatt  (if (args:get-arg ":state")   (args:get-arg ":state")    "%"))
	 (statuspatt (if (args:get-arg ":status")  (args:get-arg ":status")   "%"))

  -set-values             : update or set values in the testdata table
  :category               : set the category field (optional)
  :variable               : set the variable name (optional)
  :value                  : value measured (required)
  :expected               : value expected (required)
  :tol                    : |value-expect| <= tol (required, can be <, >, >=, <= or number)
  :units                  : name of the units for value, expected_value etc. (optional)

  -load-test-data         : read test specific data for storage in the test_data table
                            from standard in. Each line is comma delimited with four
                            fields category,variable,value,comment

Queries
  -list-runs patt         : list runs matching pattern \"patt\", % is the wildcard
  -showkeys               : show the keys used in this megatest setup
  -test-paths targpatt    : get the most recent test path(s) matching targpatt e.g. %/%... 
  -test-path targpatt    : get the most recent test path(s) matching targpatt e.g. %/%... 
                            returns list sorted by age ascending, see examples below

Misc 
  -rebuild-db             : bring the database schema up to date
  -update-meta            : update the tests metadata for all tests
  -env2file fname         : write the environment to fname.csh and fname.sh
  -setvars VAR1=val1,VAR2=val2 : Add environment variables to a run NB// these are
                                 overwritten by values set in config files.
  -server -|hostname      : start the server (reduces contention on megatest.db), use
                            - to automatically figure out hostname
  -repl                   : start a repl (useful for extending megatest)

Spreadsheet generation
  -extract-ods fname.ods  : extract an open document spreadsheet from the database
  -pathmod path           : insert path, i.e. path/runame/itempath/logfile.html
                            will clear the field if no rundir/testname/itempath/logfile
                            if it contains forward slashes the path will be converted
                            to windows style

Helpers (these only apply in test run mode)

Examples

# Get test paths 
megatest -test-paths -target ubuntu/n%/no% :runname w49% -testpatt test_mt%
# Get test path, the '.' is required, could use '*' or a specific path/file
megatest -test-path . -target ubuntu/n%/no% :runname w49% -testpatt test_mt%

Called as " (string-intersperse (argv) " ")))

;;  -gui                    : start a gui interface
;;  -config fname           : override the runconfig file with fname

;; process args

			;; misc
			"-archive"
			"-repl"
			"-lock"
			"-unlock"
			;; queries
			"-test-paths" ;; get path(s) to a test, ordered by youngest first
			"-test-path"  ;; -test-paths is deprecated

			"-runall"    ;; run all tests
			"-remove-runs"
			"-usequeue"
			"-rebuild-db"
			"-rollup"
			"-update-meta"

		  (args:get-arg "-unlock")
		  user))))

;;======================================================================
;; Get paths to tests
;;======================================================================
;; Get test paths matching target, runname, testpatt, and itempatt
(if (args:get-arg "-test-paths")
(if (or (args:get-arg "-test-path")(args:get-arg "-test-paths"))
    ;; if we are in a test use the MT_CMDINFO data
    (if (getenv "MT_CMDINFO")
	(let* ((startingdir (current-directory))
	       (cmdinfo   (read (open-input-string (base64:base64-decode (getenv "MT_CMDINFO")))))
	       (testpath  (assoc/default 'testpath  cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))

	  (change-directory testpath)
	  (if (not target)
	      (begin
		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -test-paths, exiting")
		(debug:print 0 "Failed to setup, giving up on -test-path, exiting")
		(exit 1)))
	  (set! db (open-db))    
	  (if (not (args:get-arg "-server"))
	      (server:client-setup db))
	  (let* ((itempatt (args:get-arg "-itempatt"))
		 (keys     (rdb:get-keys db))
		 (keynames (map key:get-fieldname keys))
		 (paths    (rdb:test-get-paths-matching db keynames target)))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(print path))
		      paths)))
	;; else do a general-run-call
	(general-run-call 
	 "-test-paths"
	 "Get paths to tests"
	 "-test-path"
	 "Get paths to test"
	 (lambda (db target runname keys keynames keyvallst)
	   (let* ((itempatt (args:get-arg "-itempatt"))
		  (paths    (rdb:test-get-paths-matching db keynames target)))
	     (for-each (lambda (path)
			 (print path))
		       paths))))))

# run some tests

BINPATH=$(shell realpath ../bin)
MEGATEST=$(BINPATH)/megatest
PATH := $(BINPATH):$(PATH)
RUNNAME := $(shell date +w%V.%u.%H.%M)
IPADDR := "-"
# Set SERVER to "-server -"
SERVER := 

runall : test1 test2

test1 : cleanprep
	$(MEGATEST) -runtests ez_pass -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_a $(SERVER)
	cd fullrun;$(MEGATEST) -runtests ez_pass -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_a $(SERVER)

test2 : cleanprep
	$(MEGATEST) -runtests runfirst -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b  $(SERVER) -debug 10
	cd fullrun;$(MEGATEST) -runtests runfirst -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b  $(SERVER) -debug 10

test3 : cleanprep
	$(MEGATEST) -runall -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b -m "This is a comment specific to a run" -v $(SERVER)
	cd fullrun;$(MEGATEST) -runall -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b -m "This is a comment specific to a run" -v $(SERVER)

test4 : cleanprep
	$(MEGATEST) -runall -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_aa -v $(SERVER) 2&>1 aa.log &
	$(MEGATEST) -runall -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_ab -v $(SERVER) 2&>1 ab.log &
	$(MEGATEST) -runall -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_ac -v $(SERVER) 2&>1 ac.log &
	$(MEGATEST) -runall -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_ad -v $(SERVER) 2&>1 ad.log &	
	$(MEGATEST) -runtests runfirst -itempatt %/1 -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_itempatt -v
	$(MEGATEST) -runtests runfirst -itempatt %blahha% -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_itempatt -debug 10
	cd fullrun;$(MEGATEST) -runall -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_aa -v $(SERVER) 2&>1 aa.log &
	cd fullrun;$(MEGATEST) -runall -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_ab -v $(SERVER) 2&>1 ab.log &
	cd fullrun;$(MEGATEST) -runall -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_ac -v $(SERVER) 2&>1 ac.log &
	cd fullrun;$(MEGATEST) -runall -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_ad -v $(SERVER) 2&>1 ad.log &	
	cd fullrun;$(MEGATEST) -runtests runfirst -itempatt %/1 -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_itempatt -v
	cd fullrun;$(MEGATEST) -runtests runfirst -itempatt %blahha% -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_itempatt -debug 10

cleanprep : ../*.scm Makefile *.config
	sqlite3 megatest.db "delete from metadat where var='SERVER';"
	mkdir -p /tmp/mt_runs /tmp/mt_links
	cd ..;make install
	$(MEGATEST) -remove-runs :runname $(RUNNAME)% -target %/%/% -testpatt % -itempatt %
	$(BINPATH)/dboard -rows 15 &
	cd fullrun;$(MEGATEST) -remove-runs :runname $(RUNNAME)% -target %/%/% -testpatt % -itempatt %
	cd fullrun;$(BINPATH)/dboard -rows 15 &
	touch cleanprep

test :
	csi -b -I .. ../megatest.scm -- -runall -target ubuntu/afs/tmp :runname blah
	cd ../;make test
	make runall

dashboard :
	cd ../;make install
	$(BINPATH)/dboard &
	cd fullrun;$(BINPATH)/dboard &

remove :
	(cd ../;make);$(MEGATEST) -remove-runs :runname $(RUN)  -testpatt % -itempatt % :sysname % :fsname % :datapath %
	(cd ../;make);cd fullrun;$(MEGATEST) -remove-runs :runname $(RUN)  -testpatt % -itempatt % :sysname % :fsname % :datapath %

clean  : 
	rm cleanprep

runforever :
	while(ls); do runname=`date +%F-%R:%S`;$(MEGATEST) -runall -target ubuntu/nfs/none :runname $$runname;/home/matt/data/megatest/megatest -runall -target ubuntu/nfs/none :runname $$runname;/home/matt/data/megatest/megatest -runall -target ubuntu/nfs/none :runname $$runname;done
	while(ls); do runname=`date +%F-%R:%S`;(cd fullrun;$(MEGATEST) -runall -target ubuntu/nfs/none :runname $$runname;/home/matt/data/megatest/megatest -runall -target ubuntu/nfs/none :runname $$runname;/home/matt/data/megatest/megatest -runall -target ubuntu/nfs/none :runname $$runname);done

[default]
FOOBARBAZZZZ not a useful value
BIGBOB $FOOBARBAZZZZ/bobby
FREDDY $sysname/$fsname
TOMMY  [system pwd]

[/tmp/mrwellan/env/ubuntu/afs]
BOGOUS Bob

[default/ubuntu/nfs]
CURRENT     /blah
ALT_VAR we should not see this one

[ubuntu/nfs/none]
CURRENT     /tmp/nada
UNIQUEVAR   this one should be set

[default]
FOOBARBAZZZZ not a useful value
BIGBOB $FOOBARBAZZZZ/bobby
FREDDY $sysname/$fsname
TOMMY  [system pwd]

[/tmp/mrwellan/env/ubuntu/afs]
BOGOUS Bob

[default/ubuntu/nfs]
CURRENT     /blah
ALT_VAR we should not see this one

[ubuntu/nfs/none]
CURRENT     /tmp/nada
UNIQUEVAR   this one should be set

[fields]
sysname TEXT
fsname TEXT
datapath TEXT

# refareas can be searched to find previous runs
# the path points to where megatest.db exists
[refareas]
area1 /tmp/oldarea/megatest

[setup]
# exectutable /path/to/megatest
max_concurrent_jobs 200
linktree /tmp/mt_links

[jobtools]
useshell yes
# ## launcher launches jobs, the job is managed on the target host
## by megatest, comment out launcher to run local
# workhosts localhost hermes
launcher nbfake
# launcher nodanggood

## use "xterm -e csi -- " as a launcher to examine the launch environment.
## exit with (exit)
## get a shell with (system "bash")
# launcher xterm -e csi --

[validvalues]
state start end 
status pass fail n/a 0 1 running

# These are set before all tests, override them 
# in the testconfig [pre-launch-env-overrides] section
[env-override]
SPECIAL_ENV_VARS overide them here - should be seen at launch and in the runs
TESTVAR [system realpath .]
DEADVAR [system ls]
VARWITHDOLLAR $HOME/.zshrc
WACKYVAR  #{system ls > /dev/null}
WACKYVAR2 #{get validvalues state}
WACKYVAR3 #{getenv USER}
WACKYVAR4 #{scheme (+ 5 6 7)}
WACKYVAR5 #{getenv sysname}/#{getenv fsname}/#{getenv datapath}
WACKYVAR6 #{scheme (args:get-arg "-target")}
PREDICTABLE the_ans

# XTERM   [system xterm]
# RUNDEAD [system exit 56]

## disks are:
## name host:/path/to/area
## -or-
## name /path/to/area
[disks]
1 /tmp/mt_runs

[include #{getenv USER}_testing.config]

[include common_runconfigs.config]

WACKYVAR0 #{get ubuntu/nfs/none CURRENT}
WACKYVAR1 #{scheme (args:get-arg "-target")}

[default/ubuntu/nfs]
WACKYVAR2 #{runconfigs-get CURRENT}

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 1

[setup]
runscript main.sh

[requirements]
priority 9

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

[setup]

[ezsteps]
exit2       exit 2
lookithome  ls /home

[test_meta]
author matt
owner  bob
description This test runs two steps; the first exits with
     code 2 (a fail because not using logpro) and the second
     is a pass

tags first,single
reviewed 09/10/2011, by Matt

[setup]

[requirements]
priority 10

[ezsteps]
lookittmp   sleep 5s;ls /tmp
lookithome  sleep 2;ls /home
# should fail on next step
lookitnada  sleep 3;ls /nada
lookitusr   sleep 2;ls /usr

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass, no logpro file.

tags first,single
reviewed 09/10/2011, by Matt

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass, no logpro file.

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

;; define your hooks
(hook:first-error   "echo \"Error hook activated: #{escaped errmsg}\"")
(hook:first-warning "echo \"Got warning: #{escaped warnmsg}\"")
(hook:value "echo \"Value hook activated: expected=#{expected}, measured=#{measured}, tolerance=#{tolerance}, message=#{message}\"")

;; first ensure your run at least started
;;
(trigger "Init"     #/This is a header/)
(trigger "InitEnd"  #/^\s*$/)
(section "Init" "Init" "InitEnd")

(trigger "Body"     #/^.*$/) ;; anything starts the body
;; (trigger "EndBody"  #/This had better never match/)

(section "Body"     "Body" "EndBody")

(trigger "Blah2"    #/^begin Blah2/)
(trigger "Blah2End" #/^end Blah2/)
(section "Blah2"    "Blah2" "Blah2End")

(expect:required in "Init"  = 1 "Header"      #/This is a header/)
(expect:required in "LogFileBody" > 0 "Something required but not found" #/This is required but not found/)
(expect:value    in "LogFileBody" 1.9 0.1 "Output voltage" #/Measured voltage output:\s*([\d\.\+\-e]+)v/)
(expect:value    in "LogFileBody" 0.5 0.1 "Output current" #/Measured output current:\s*([\d\.\+\-e]+)mA/)
(expect:value    in "LogFileBody" 110e9 2e9 "A big number (first)" #/Freq:\s*([\d\.\+\-e]+)\s+Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (second), hook not called" #/Freq:\s*([\d\.\+\-e]+)Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (never activated)" #/Freq:\s*([\d\.\+\-e]+)zH/)

;; Using match number
(expect:value    in "LogFileBody" 1.9 0.1 "Time Voltage" #/out: (\d+)\s+(\d+)/ match: 2)

;; Comparison instead of tolerance
(expect:value    in "LogFileBody" 1.9 >   "Time voltage" #/out: (\d+)\s+(\d+)/ match: 2)

(expect:ignore   in "Blah2" < 99 "FALSE ERROR" #/ERROR/)
(expect:ignore   in "Body"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)
(expect:error    in "Body"  = 0 "ERROR BLAH"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;(expect in "Init"  < 1 "Junk"        #/This is bogus/)

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/.*/)) ;; force an error

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home

[test_meta]
author matt
owner  bob
description This test runs two ezstep, the first of which is expected to fail using a simple logpro file.

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

#!/bin/bash

megatest -step yepstep :state start :status n/a
ls /tmp
megatest -step yepstep :state end :status $?

megatest -load-test-data << EOF
OPER,du,   1.2,  1.2, <   , GBytes  ,System didn't use too much space
EOF

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

megatest -test-status :state COMPLETED :status AUTO

[setup]

[ezsteps]
firststep main.sh

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is logpro clean
    but fails based on -test-data loaded.

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

;; define your hooks
(hook:first-error   "echo \"Error hook activated: #{escaped errmsg}\"")
(hook:first-warning "echo \"Got warning: #{escaped warnmsg}\"")
(hook:value "echo \"Value hook activated: expected=#{expected}, measured=#{measured}, tolerance=#{tolerance}, message=#{message}\"")

;; first ensure your run at least started
;;
(trigger "Init"     #/This is a header/)
(trigger "InitEnd"  #/^\s*$/)
(section "Init" "Init" "InitEnd")

(trigger "Body"     #/^.*$/) ;; anything starts the body
;; (trigger "EndBody"  #/This had better never match/)

(section "Body"     "Body" "EndBody")

(trigger "Blah2"    #/^begin Blah2/)
(trigger "Blah2End" #/^end Blah2/)
(section "Blah2"    "Blah2" "Blah2End")

(expect:required in "Init"  = 1 "Header"      #/This is a header/)
(expect:required in "LogFileBody" > 0 "Something required but not found" #/This is required but not found/)
(expect:value    in "LogFileBody" 1.9 0.1 "Output voltage" #/Measured voltage output:\s*([\d\.\+\-e]+)v/)
(expect:value    in "LogFileBody" 0.5 0.1 "Output current" #/Measured output current:\s*([\d\.\+\-e]+)mA/)
(expect:value    in "LogFileBody" 110e9 2e9 "A big number (first)" #/Freq:\s*([\d\.\+\-e]+)\s+Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (second), hook not called" #/Freq:\s*([\d\.\+\-e]+)Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (never activated)" #/Freq:\s*([\d\.\+\-e]+)zH/)

;; Using match number
(expect:value    in "LogFileBody" 1.9 0.1 "Time Voltage" #/out: (\d+)\s+(\d+)/ match: 2)

;; Comparison instead of tolerance
(expect:value    in "LogFileBody" 1.9 >   "Time voltage" #/out: (\d+)\s+(\d+)/ match: 2)

(expect:ignore   in "Blah2" < 99 "FALSE ERROR" #/ERROR/)
(expect:ignore   in "Body"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)
(expect:error    in "Body"  = 0 "ERROR BLAH"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;(expect in "Init"  < 1 "Junk"        #/This is bogus/)

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass using a simple logpro file.

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


;; Force a warn for this test
(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:warning  in "LogFileBody"  = 0 "Any warning" #/.*/)
;; Can't have a required since it will mask the warns! Could make the warn non-overlapping with the
;; required I suppose...
;; (expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls $HOME

[test_meta]
author matt
owner  bob
description This test runs two ezsteps the first of which is expected to fail using a simple logpro file.

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

$MT_MEGATEST -load-test-data << EOF
foo,bar,   1.2,  1.9, >
foo,rab, 1.0e9, 10e9, 1e9
foo,bla,   1.2,  1.9, <
foo,bal,   1.2,  1.2, <   ,     ,Check for overload
foo,alb,   1.2,  1.2, <=  , Amps,This is the high power circuit test
foo,abl,   1.2,  1.3, 0.1
foo,bra,   1.2, pass, silly stuff
faz,bar,    10,  8mA,     ,     ,"this is a comment"
EOF

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

# Needed to force rolling up the results and set the test to COMPLETED
$MT_MEGATEST -test-status :state COMPLETED :status AUTO

[setup]
runscript main.sh

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# category variable value expected  tol/comp units comment
$MT_MEGATEST -load-test-data << EOF
foo,       bar,     1.9,  1.8,      >
foo,       rab,   1.0e9,  2e9,      1e9
foo,       bla,     1.2,  1.9,      <
foo,       bal,    -1.1,    0,      <   ,         , Check for overload
foo,       alb,     1.2,  1.2,      <=  ,     Amps, This is the high power circuit test
foo,       abl,     1.2,  1.3,      0.1
foo,       bra,     1.2, pass,      silly stuff
faz,       bar,      10,  8mA,          ,         ,"this is a comment"
EOF

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done
# Needed to force rolling up the results and set the test to COMPLETED
$MT_MEGATEST -test-status :state COMPLETED :status AUTO

[setup]
runscript main.sh

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

(expect:required in "LogFileBody" > 0 "A file name that should never exist!" #/This is a awfully stupid file name that should never be found in the temp dir/)

;; (expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
;; (expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/.*/)) ;; force an error

[setup]

[ezsteps]
lookittmp   ls /tmp

[test_meta]
author matt
owner  bob
description This test runs two ezstep, the first of which is expected to fail using a simple logpro file.

tags logpro
reviewed 09/10/2011, by Matt

category, variable, expected,   value,  tol,   units,  comment

#!/bin/bash

if [[ $TARGETDISPLAY = "" || $TARGETHOST = "" || $TARGETDIR = "" || $TARGETUSER = "" ]]; then
    msg="You must set the TARGETDISPLAY, TARGETHOST, TARGETDIR and TARGETUSER variables for manual tests"
    echo $msg
    megatest -test-status :state COMPLETED :status FAIL -m $msg
    exit 1
else
    megatest -step setup :state start :status n/a
    xterm -display $TARGETDISPLAY -e ./setupremote.sh
    megatest -step setup :state end :status $?
fi

#!/bin/bash

megatest -step rsyncto :state start :status n/a
echo "First, lets populate your area with necessary files, you may be prompted for your Unix password several times"
rsync -avz $MT_TEST_RUN_DIR/  $TARGETUSER@$TARGETHOST:$TARGETDIR
megatest -step rsyncto :state end :status n/a

megatest -step runtest :state start :status n/a
remotecmd="cd $TARGETDIR;xterm -display $TARGETDISPLAY"
echo Launching $remotecmd on $TARGETHOST as $TARGETUSER
ssh $TARGETUSER@$TARGETHOST $remotecmd
megatest -step runtest :state end :status $?

megatest -step gatherdata :state start :status n/a
rsync -avz $TARGETUSER@$TARGETHOST:$TARGETDIR/results/ $MT_TEST_RUN_DIR/results/
if [[ -e $MT_TEST_RUN_DIR/results/results.csv ]]; then
    megatest -load-test-data < $MT_TEST_RUN_DIR/results/results.csv
fi

if [[ -e $MT_TEST_RUN_DIR/results/final_results.log && $MT_TEST_RUN_DIR/final_results.logpro ]]; then
    logpro $MT_TEST_RUN_DIR/final_results.logpro $MT_TEST_RUN_DIR/final_results.html < $MT_TEST_RUN_DIR/results/final_results.log
    if [[ $? = 0 ]]; then
	finalstatus=PASS
    else
	finalstatus=FAIL
    fi
    megatest -test-status :state COMPLETED :status $finalstatus -setlog final_results.html
fi

[setup]

[ezsteps]
setup ./runsetupxterm.sh
# launch launchxterm

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass
            using a simple logpro file.
tags first,single
reviewed 09/10/2011, by Matt

[setup]
runscript idontexist

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 1

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 10

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 10
waiton priority_1

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 2

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 3


[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 4

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 5

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 6

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 7

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 8

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 9

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# megatest -step wasting_time :state start :status n/a -m "This is a test step comment"
# sleep 20
# megatest -step wasting_time :state end :status $?

touch ../I_was_here
mkdir -p $MT_RUN_AREA_HOME/tmp/$USER/$sysname/$fsname/$datapath/$MT_RUNNAME
echo 1 2 3 4 5 > $MT_RUN_AREA_HOME/tmp/$USER/$sysname/$fsname/$datapath/$MT_RUNNAME/the_ans

$MT_MEGATEST -runstep wasting_time -logpro wasting_time.logpro "sleep 8;echo all done eh?" -m "This is a test step comment"

$MT_MEGATEST -load-test-data << EOF
foo,bar,1.2,1.9,>
foo,rab,1.0e9,10e9,1e9
foo,bla,1.2,1.9,<
foo,bal,1.2,1.2,<,,Check for overload
foo,alb,1.2,1.2,<=,Amps,This is the high power circuit test
foo,abl,1.2,1.3,0.1
foo,bra,1.2,pass,silly stuff
faz,bar,10,8mA,,,"this is a comment"
EOF

$MT_MEGATEST -load-test-data << EOF
cat,  var, val, exp, comp, units, comment, status, type
ameas,iout,1.2,1.9,>,Amps,Comment,,meas
EOF

$MT_MEGATEST -test-status :state COMPLETED :status $? -m "This is a test level comment" :value 10e6 :expected_value 1.1e6 :tol 100e3 :category nada :variable sillyvar :units mFarks :comment "This is the value/expected comment"

# $MT_MEGATEST -test-status :state COMPLETED :status FAIL

[setup]
runscript main.sh

[pre-launch-env-vars]
# These are set before the test is launched on the originating
# host. This can be used to control remote launch tools, e.g. to
# to choose the target host, select the launch tool etc.
SPECIAL_ENV_VAR override with everything after the first space.

[items]
SEASON summer winter fall spring

[itemstable]
BLOCK a  b
TOCK  1  2

[test_meta]
author matt
owner  bob
description This test must
 be run before the other tests

tags first,single
reviewed 1/1/1965

;; put stuff here

;; NOTE: This is not legit logpro code!!! 

;; Test for 0=PASS, 1=WARN, >2 = FAIL

;; (define season (get-environment-variable "SEASON"))
;; 
;; (exit 
;;  (case (string->symbol season)
;;    ((summer) 0)
;;    ((winter) 1)
;;    ((fall)   2)
;;    (else     0)))

#!/bin/bash

# megatest -step wasting_time :state start :status n/a -m "This is a test step comment"
# sleep 20
# megatest -step wasting_time :state end :status $?

$MT_MEGATEST -runstep wasting_time -logpro wasting_time.logpro "sleep 5;echo all done eh?" -m "This is a test step comment"

$MT_MEGATEST -test-status :state COMPLETED :status $? -m "This is a test level comment" -set-toplog the_top_log.html :first_err "This is the first error"

[setup]
runscript main.sh

[requirements]
diskspace 1M
memory    1G

[pre-launch-env-vars]
# These are set before the test is launched on the originating
# host. This can be used to control remote launch tools, e.g. to
# to choose the target host, select the launch tool etc.
SPECIAL_ENV_VAR override with everything after the first space.

;; put stuff here

;; NOTE: This is not legit logpro code!!! 

;; Test for 0=PASS, 1=WARN, >2 = FAIL

;; (define season (get-environment-variable "SEASON"))
;; 
;; (exit 
;;  (case (string->symbol season)
;;    ((summer) 0)
;;    ((winter) 1)
;;    ((fall)   2)
;;    (else     0)))

#!/bin/bash

# megatest -step wasting_time :state start :status n/a -m "This is a test step comment"
# sleep 20
# megatest -step wasting_time :state end :status $?

$MT_MEGATEST -runstep wasting_time -logpro wasting_time.logpro "sleep 5;echo all done eh?" -m "This is a test step comment"

$MT_MEGATEST -test-status :state COMPLETED :status $? -m "This is a test level comment" -set-toplog the_top_log.html :first_warn "This is the first warning"

[setup]
runscript main.sh

[requirements]
diskspace 1M
memory    1G
waiton singletest

[pre-launch-env-vars]
# These are set before the test is launched on the originating
# host. This can be used to control remote launch tools, e.g. to
# to choose the target host, select the launch tool etc.
SPECIAL_ENV_VAR override with everything after the first space.

;; put stuff here

;; NOTE: This is not legit logpro code!!! 

;; Test for 0=PASS, 1=WARN, >2 = FAIL

;; (define season (get-environment-variable "SEASON"))
;; 
;; (exit 
;;  (case (string->symbol season)
;;    ((summer) 0)
;;    ((winter) 1)
;;    ((fall)   2)
;;    (else     0)))

#! /usr/bin/env ruby

require "#{ENV['MT_RUN_AREA_HOME']}/supportfiles/ruby/librunscript.rb"

# run_record(stepname, cmd) - will record in db if exit code of script was zero or not
run_and_record('create db',"sqlite3 testing.db << EOF\ncreate table if not exists blah(id INTEGER PRIMARY KEY,name TEXT);\n.q\nEOF","")

if (! File.exists?("../../runfirst/I_was_here"))
    puts "ERROR: This test was started before the prerequisites ran!"
    system "megatest -test-status :state INCOMPLETE :status FAIL"
    exit 1
end

# file_size_checker(stepname, filename, minsize, maxsize) - negative means ignore
# file_size_checker('create db','testing.db',100,-1)

num_records=rand(5) # 0000
record_step("add #{num_records}","start","n/a")
status=false
(0..num_records).each do |i|
  randstring="a;lskdfja;sdfj;alsdfj;aslfdj;alsfja;lsfdj;alsfja;lsjfd;lasfjl;asdfja;slfj;alsjf;asljf;alsjf;lasdjf;lasjf;lasjf;alsjf;lashflkashflkerhflkdsvnlasldhlfaldf"
  # status=system "sqlite3 testing.db \"insert into blah (name) values ('#{randstring}');\""
  system "megatest -step testing :state wrote_junk :status #{num_records}"
  sleep(5)
  puts "i=#{i}"
end
if status==0
  status='pass'
else
  status='fail'
end

record_step("add #{num_records}","end",status)

[setup]
runscript runscript.rb
tags non important,dumb junk

[requirements]
waiton    runfirst

[items]
MANYITEMS [system (env > envfile.txt;echo aa ab ac ad ae af ag ah ai)]
# BORKED  

#!/usr/bin/env bash

! grep ALT_VAR megatest.sh

#!/usr/bin/env bash

! grep BOGOUS megatest.sh

#!/usr/bin/env bash

grep CURRENT megatest.sh | grep /tmp/nada

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home
# $CURRENT should be /tmp/nada
currentisblah currentisblah.sh

# $BOGOUS should NOT be set
bogousnotset bogousnotset.sh

# ALT_VAR should NOT be set
altvarnotset altvarnotset.sh

[requirements]
waiton runfirst
priority 0

[items]
NUMNUM [system cat $MT_RUN_AREA_HOME/tmp/$USER/$sysname/$fsname/$datapath/$MT_RUNNAME/$PREDICTABLE]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass, no logpro file.

tags first,single
reviewed 09/10/2011, by Matt

[fields]
sysname TEXT
fsname TEXT
datapath TEXT

[setup]
# exectutable /path/to/megatest
max_concurrent_jobs 200
linktree /tmp/mt_links

[jobtools]
useshell yes
# ## launcher launches jobs, the job is managed on the target host
## by megatest, comment out launcher to run local
# workhosts localhost hermes
launcher nbfake
# launcher nodanggood

## use "xterm -e csi -- " as a launcher to examine the launch environment.
## exit with (exit)
## get a shell with (system "bash")
# launcher xterm -e csi --

[validvalues]
state start end 
status pass fail n/a 0 1 running

# These are set before all tests, override them 
# in the testconfig [pre-launch-env-overrides] section
[env-override]
SPECIAL_ENV_VARS overide them here - should be seen at launch and in the runs
TESTVAR [system realpath .]
DEADVAR [system ls]
VARWITHDOLLAR $HOME/.zshrc
WACKYVAR  #{system ls > /dev/null}
WACKYVAR2 #{get validvalues state}
WACKYVAR3 #{getenv USER}
WACKYVAR4 #{scheme (+ 5 6 7)}
WACKYVAR5 #{getenv sysname}/#{getenv fsname}/#{getenv datapath}
WACKYVAR6 #{scheme (args:get-arg "-target")}
PREDICTABLE the_ans

# XTERM   [system xterm]
# RUNDEAD [system exit 56]

## disks are:
## name host:/path/to/area
## -or-
## name /path/to/area
[disks]
1 /tmp/mt_runs

[include #{getenv USER}_testing.config]

[include common_runconfigs.config]

WACKYVAR0 #{get ubuntu/nfs/none CURRENT}
WACKYVAR1 #{scheme (args:get-arg "-target")}

[default/ubuntu/nfs]
WACKYVAR2 #{runconfigs-get CURRENT}

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 1

[setup]
runscript main.sh

[requirements]
priority 9

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

[setup]

[ezsteps]
exit2       exit 2
lookithome  ls /home

[test_meta]
author matt
owner  bob
description This test runs two steps; the first exits with
     code 2 (a fail because not using logpro) and the second
     is a pass

tags first,single
reviewed 09/10/2011, by Matt

[setup]

[requirements]
priority 10

[ezsteps]
lookittmp   sleep 5s;ls /tmp
lookithome  sleep 2;ls /home
# should fail on next step
lookitnada  sleep 3;ls /nada
lookitusr   sleep 2;ls /usr

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass, no logpro file.

tags first,single
reviewed 09/10/2011, by Matt

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass, no logpro file.

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

;; define your hooks
(hook:first-error   "echo \"Error hook activated: #{escaped errmsg}\"")
(hook:first-warning "echo \"Got warning: #{escaped warnmsg}\"")
(hook:value "echo \"Value hook activated: expected=#{expected}, measured=#{measured}, tolerance=#{tolerance}, message=#{message}\"")

;; first ensure your run at least started
;;
(trigger "Init"     #/This is a header/)
(trigger "InitEnd"  #/^\s*$/)
(section "Init" "Init" "InitEnd")

(trigger "Body"     #/^.*$/) ;; anything starts the body
;; (trigger "EndBody"  #/This had better never match/)

(section "Body"     "Body" "EndBody")

(trigger "Blah2"    #/^begin Blah2/)
(trigger "Blah2End" #/^end Blah2/)
(section "Blah2"    "Blah2" "Blah2End")

(expect:required in "Init"  = 1 "Header"      #/This is a header/)
(expect:required in "LogFileBody" > 0 "Something required but not found" #/This is required but not found/)
(expect:value    in "LogFileBody" 1.9 0.1 "Output voltage" #/Measured voltage output:\s*([\d\.\+\-e]+)v/)
(expect:value    in "LogFileBody" 0.5 0.1 "Output current" #/Measured output current:\s*([\d\.\+\-e]+)mA/)
(expect:value    in "LogFileBody" 110e9 2e9 "A big number (first)" #/Freq:\s*([\d\.\+\-e]+)\s+Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (second), hook not called" #/Freq:\s*([\d\.\+\-e]+)Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (never activated)" #/Freq:\s*([\d\.\+\-e]+)zH/)

;; Using match number
(expect:value    in "LogFileBody" 1.9 0.1 "Time Voltage" #/out: (\d+)\s+(\d+)/ match: 2)

;; Comparison instead of tolerance
(expect:value    in "LogFileBody" 1.9 >   "Time voltage" #/out: (\d+)\s+(\d+)/ match: 2)

(expect:ignore   in "Blah2" < 99 "FALSE ERROR" #/ERROR/)
(expect:ignore   in "Body"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)
(expect:error    in "Body"  = 0 "ERROR BLAH"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;(expect in "Init"  < 1 "Junk"        #/This is bogus/)

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/.*/)) ;; force an error

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home

[test_meta]
author matt
owner  bob
description This test runs two ezstep, the first of which is expected to fail using a simple logpro file.

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

#!/bin/bash

megatest -step yepstep :state start :status n/a
ls /tmp
megatest -step yepstep :state end :status $?

megatest -load-test-data << EOF
OPER,du,   1.2,  1.2, <   , GBytes  ,System didn't use too much space
EOF

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

megatest -test-status :state COMPLETED :status AUTO

[setup]

[ezsteps]
firststep main.sh

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is logpro clean
    but fails based on -test-data loaded.

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

;; define your hooks
(hook:first-error   "echo \"Error hook activated: #{escaped errmsg}\"")
(hook:first-warning "echo \"Got warning: #{escaped warnmsg}\"")
(hook:value "echo \"Value hook activated: expected=#{expected}, measured=#{measured}, tolerance=#{tolerance}, message=#{message}\"")

;; first ensure your run at least started
;;
(trigger "Init"     #/This is a header/)
(trigger "InitEnd"  #/^\s*$/)
(section "Init" "Init" "InitEnd")

(trigger "Body"     #/^.*$/) ;; anything starts the body
;; (trigger "EndBody"  #/This had better never match/)

(section "Body"     "Body" "EndBody")

(trigger "Blah2"    #/^begin Blah2/)
(trigger "Blah2End" #/^end Blah2/)
(section "Blah2"    "Blah2" "Blah2End")

(expect:required in "Init"  = 1 "Header"      #/This is a header/)
(expect:required in "LogFileBody" > 0 "Something required but not found" #/This is required but not found/)
(expect:value    in "LogFileBody" 1.9 0.1 "Output voltage" #/Measured voltage output:\s*([\d\.\+\-e]+)v/)
(expect:value    in "LogFileBody" 0.5 0.1 "Output current" #/Measured output current:\s*([\d\.\+\-e]+)mA/)
(expect:value    in "LogFileBody" 110e9 2e9 "A big number (first)" #/Freq:\s*([\d\.\+\-e]+)\s+Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (second), hook not called" #/Freq:\s*([\d\.\+\-e]+)Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (never activated)" #/Freq:\s*([\d\.\+\-e]+)zH/)

;; Using match number
(expect:value    in "LogFileBody" 1.9 0.1 "Time Voltage" #/out: (\d+)\s+(\d+)/ match: 2)

;; Comparison instead of tolerance
(expect:value    in "LogFileBody" 1.9 >   "Time voltage" #/out: (\d+)\s+(\d+)/ match: 2)

(expect:ignore   in "Blah2" < 99 "FALSE ERROR" #/ERROR/)
(expect:ignore   in "Body"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)
(expect:error    in "Body"  = 0 "ERROR BLAH"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;(expect in "Init"  < 1 "Junk"        #/This is bogus/)

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass using a simple logpro file.

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


;; Force a warn for this test
(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:warning  in "LogFileBody"  = 0 "Any warning" #/.*/)
;; Can't have a required since it will mask the warns! Could make the warn non-overlapping with the
;; required I suppose...
;; (expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls $HOME

[test_meta]
author matt
owner  bob
description This test runs two ezsteps the first of which is expected to fail using a simple logpro file.

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

$MT_MEGATEST -load-test-data << EOF
foo,bar,   1.2,  1.9, >
foo,rab, 1.0e9, 10e9, 1e9
foo,bla,   1.2,  1.9, <
foo,bal,   1.2,  1.2, <   ,     ,Check for overload
foo,alb,   1.2,  1.2, <=  , Amps,This is the high power circuit test
foo,abl,   1.2,  1.3, 0.1
foo,bra,   1.2, pass, silly stuff
faz,bar,    10,  8mA,     ,     ,"this is a comment"
EOF

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

# Needed to force rolling up the results and set the test to COMPLETED
$MT_MEGATEST -test-status :state COMPLETED :status AUTO

[setup]
runscript main.sh

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# category variable value expected  tol/comp units comment
$MT_MEGATEST -load-test-data << EOF
foo,       bar,     1.9,  1.8,      >
foo,       rab,   1.0e9,  2e9,      1e9
foo,       bla,     1.2,  1.9,      <
foo,       bal,    -1.1,    0,      <   ,         , Check for overload
foo,       alb,     1.2,  1.2,      <=  ,     Amps, This is the high power circuit test
foo,       abl,     1.2,  1.3,      0.1
foo,       bra,     1.2, pass,      silly stuff
faz,       bar,      10,  8mA,          ,         ,"this is a comment"
EOF

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done
# Needed to force rolling up the results and set the test to COMPLETED
$MT_MEGATEST -test-status :state COMPLETED :status AUTO

[setup]
runscript main.sh

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

(expect:required in "LogFileBody" > 0 "A file name that should never exist!" #/This is a awfully stupid file name that should never be found in the temp dir/)

;; (expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
;; (expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/.*/)) ;; force an error

[setup]

[ezsteps]
lookittmp   ls /tmp

[test_meta]
author matt
owner  bob
description This test runs two ezstep, the first of which is expected to fail using a simple logpro file.

tags logpro
reviewed 09/10/2011, by Matt

category, variable, expected,   value,  tol,   units,  comment

#!/bin/bash

if [[ $TARGETDISPLAY = "" || $TARGETHOST = "" || $TARGETDIR = "" || $TARGETUSER = "" ]]; then
    msg="You must set the TARGETDISPLAY, TARGETHOST, TARGETDIR and TARGETUSER variables for manual tests"
    echo $msg
    megatest -test-status :state COMPLETED :status FAIL -m $msg
    exit 1
else
    megatest -step setup :state start :status n/a
    xterm -display $TARGETDISPLAY -e ./setupremote.sh
    megatest -step setup :state end :status $?
fi

#!/bin/bash

megatest -step rsyncto :state start :status n/a
echo "First, lets populate your area with necessary files, you may be prompted for your Unix password several times"
rsync -avz $MT_TEST_RUN_DIR/  $TARGETUSER@$TARGETHOST:$TARGETDIR
megatest -step rsyncto :state end :status n/a

megatest -step runtest :state start :status n/a
remotecmd="cd $TARGETDIR;xterm -display $TARGETDISPLAY"
echo Launching $remotecmd on $TARGETHOST as $TARGETUSER
ssh $TARGETUSER@$TARGETHOST $remotecmd
megatest -step runtest :state end :status $?

megatest -step gatherdata :state start :status n/a
rsync -avz $TARGETUSER@$TARGETHOST:$TARGETDIR/results/ $MT_TEST_RUN_DIR/results/
if [[ -e $MT_TEST_RUN_DIR/results/results.csv ]]; then
    megatest -load-test-data < $MT_TEST_RUN_DIR/results/results.csv
fi

if [[ -e $MT_TEST_RUN_DIR/results/final_results.log && $MT_TEST_RUN_DIR/final_results.logpro ]]; then
    logpro $MT_TEST_RUN_DIR/final_results.logpro $MT_TEST_RUN_DIR/final_results.html < $MT_TEST_RUN_DIR/results/final_results.log
    if [[ $? = 0 ]]; then
	finalstatus=PASS
    else
	finalstatus=FAIL
    fi
    megatest -test-status :state COMPLETED :status $finalstatus -setlog final_results.html
fi

[setup]

[ezsteps]
setup ./runsetupxterm.sh
# launch launchxterm

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass
            using a simple logpro file.
tags first,single
reviewed 09/10/2011, by Matt

[setup]
runscript idontexist

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 1

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 10

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 10
waiton priority_1

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 2

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 3


[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 4

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 5

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 6

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 7

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 8

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 9

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# megatest -step wasting_time :state start :status n/a -m "This is a test step comment"
# sleep 20
# megatest -step wasting_time :state end :status $?

touch ../I_was_here
mkdir -p $MT_RUN_AREA_HOME/tmp/$USER/$sysname/$fsname/$datapath/$MT_RUNNAME
echo 1 2 3 4 5 > $MT_RUN_AREA_HOME/tmp/$USER/$sysname/$fsname/$datapath/$MT_RUNNAME/the_ans

$MT_MEGATEST -runstep wasting_time -logpro wasting_time.logpro "sleep 8;echo all done eh?" -m "This is a test step comment"

$MT_MEGATEST -load-test-data << EOF
foo,bar,1.2,1.9,>
foo,rab,1.0e9,10e9,1e9
foo,bla,1.2,1.9,<
foo,bal,1.2,1.2,<,,Check for overload
foo,alb,1.2,1.2,<=,Amps,This is the high power circuit test
foo,abl,1.2,1.3,0.1
foo,bra,1.2,pass,silly stuff
faz,bar,10,8mA,,,"this is a comment"
EOF

$MT_MEGATEST -load-test-data << EOF
cat,  var, val, exp, comp, units, comment, status, type
ameas,iout,1.2,1.9,>,Amps,Comment,,meas
EOF

$MT_MEGATEST -test-status :state COMPLETED :status $? -m "This is a test level comment" :value 10e6 :expected_value 1.1e6 :tol 100e3 :category nada :variable sillyvar :units mFarks :comment "This is the value/expected comment"

# $MT_MEGATEST -test-status :state COMPLETED :status FAIL

[setup]
runscript main.sh

[pre-launch-env-vars]
# These are set before the test is launched on the originating
# host. This can be used to control remote launch tools, e.g. to
# to choose the target host, select the launch tool etc.
SPECIAL_ENV_VAR override with everything after the first space.

[items]
SEASON summer winter fall spring

[itemstable]
BLOCK a  b
TOCK  1  2

[test_meta]
author matt
owner  bob
description This test must
 be run before the other tests

tags first,single
reviewed 1/1/1965

;; put stuff here

;; NOTE: This is not legit logpro code!!! 

;; Test for 0=PASS, 1=WARN, >2 = FAIL

;; (define season (get-environment-variable "SEASON"))
;; 
;; (exit 
;;  (case (string->symbol season)
;;    ((summer) 0)
;;    ((winter) 1)
;;    ((fall)   2)
;;    (else     0)))

#!/bin/bash

# megatest -step wasting_time :state start :status n/a -m "This is a test step comment"
# sleep 20
# megatest -step wasting_time :state end :status $?

$MT_MEGATEST -runstep wasting_time -logpro wasting_time.logpro "sleep 5;echo all done eh?" -m "This is a test step comment"

$MT_MEGATEST -test-status :state COMPLETED :status $? -m "This is a test level comment" -set-toplog the_top_log.html :first_err "This is the first error"

[setup]
runscript main.sh

[requirements]
diskspace 1M
memory    1G

[pre-launch-env-vars]
# These are set before the test is launched on the originating
# host. This can be used to control remote launch tools, e.g. to
# to choose the target host, select the launch tool etc.
SPECIAL_ENV_VAR override with everything after the first space.

;; put stuff here

;; NOTE: This is not legit logpro code!!! 

;; Test for 0=PASS, 1=WARN, >2 = FAIL

;; (define season (get-environment-variable "SEASON"))
;; 
;; (exit 
;;  (case (string->symbol season)
;;    ((summer) 0)
;;    ((winter) 1)
;;    ((fall)   2)
;;    (else     0)))

#!/bin/bash

# megatest -step wasting_time :state start :status n/a -m "This is a test step comment"
# sleep 20
# megatest -step wasting_time :state end :status $?

$MT_MEGATEST -runstep wasting_time -logpro wasting_time.logpro "sleep 5;echo all done eh?" -m "This is a test step comment"

$MT_MEGATEST -test-status :state COMPLETED :status $? -m "This is a test level comment" -set-toplog the_top_log.html :first_warn "This is the first warning"

[setup]
runscript main.sh

[requirements]
diskspace 1M
memory    1G
waiton singletest

[pre-launch-env-vars]
# These are set before the test is launched on the originating
# host. This can be used to control remote launch tools, e.g. to
# to choose the target host, select the launch tool etc.
SPECIAL_ENV_VAR override with everything after the first space.

;; put stuff here

;; NOTE: This is not legit logpro code!!! 

;; Test for 0=PASS, 1=WARN, >2 = FAIL

;; (define season (get-environment-variable "SEASON"))
;; 
;; (exit 
;;  (case (string->symbol season)
;;    ((summer) 0)
;;    ((winter) 1)
;;    ((fall)   2)
;;    (else     0)))

#! /usr/bin/env ruby

require "#{ENV['MT_RUN_AREA_HOME']}/supportfiles/ruby/librunscript.rb"

# run_record(stepname, cmd) - will record in db if exit code of script was zero or not
run_and_record('create db',"sqlite3 testing.db << EOF\ncreate table if not exists blah(id INTEGER PRIMARY KEY,name TEXT);\n.q\nEOF","")

if (! File.exists?("../../runfirst/I_was_here"))
    puts "ERROR: This test was started before the prerequisites ran!"
    system "megatest -test-status :state INCOMPLETE :status FAIL"
    exit 1
end

# file_size_checker(stepname, filename, minsize, maxsize) - negative means ignore
# file_size_checker('create db','testing.db',100,-1)

num_records=rand(5) # 0000
record_step("add #{num_records}","start","n/a")
status=false
(0..num_records).each do |i|
  randstring="a;lskdfja;sdfj;alsdfj;aslfdj;alsfja;lsfdj;alsfja;lsjfd;lasfjl;asdfja;slfj;alsjf;asljf;alsjf;lasdjf;lasjf;lasjf;alsjf;lashflkashflkerhflkdsvnlasldhlfaldf"
  # status=system "sqlite3 testing.db \"insert into blah (name) values ('#{randstring}');\""
  system "megatest -step testing :state wrote_junk :status #{num_records}"
  sleep(5)
  puts "i=#{i}"
end
if status==0
  status='pass'
else
  status='fail'
end

record_step("add #{num_records}","end",status)

[setup]
runscript runscript.rb
tags non important,dumb junk

[requirements]
waiton    runfirst

[items]
MANYITEMS [system (env > envfile.txt;echo aa ab ac ad ae af ag ah ai)]
# BORKED  

#!/usr/bin/env bash

! grep ALT_VAR megatest.sh

#!/usr/bin/env bash

! grep BOGOUS megatest.sh

#!/usr/bin/env bash

grep CURRENT megatest.sh | grep /tmp/nada

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home
# $CURRENT should be /tmp/nada
currentisblah currentisblah.sh

# $BOGOUS should NOT be set
bogousnotset bogousnotset.sh

# ALT_VAR should NOT be set
altvarnotset altvarnotset.sh

[requirements]
waiton runfirst
priority 0

[items]
NUMNUM [system cat $MT_RUN_AREA_HOME/tmp/$USER/$sysname/$fsname/$datapath/$MT_RUNNAME/$PREDICTABLE]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass, no logpro file.

tags first,single
reviewed 09/10/2011, by Matt