Megatest

	rmtmod
	(prefix mtargs args:))

(include "common_records.scm")

(define (remove-files filespec)
  (let ((files (glob filespec)))
    (for-each delete-file* files)))

(define (stop-the-train)
  (thread-start! (make-thread (lambda ()
				(let loop ()
				  (if (and *toppath*
					   (file-exists? (conc *toppath*"/stop-the-train")))
				      (let* ((msg (conc "ERROR: found file "*toppath*"/stop-the-train, exiting immediately")))

				     (sqlite3:execute db (conc "PRAGMA synchronous = "sync-mode";")))
				 (if journal-mode
				     (sqlite3:execute db (conc "PRAGMA journal_mode = "journal-mode";")))
				 (if (and init-proc (or force-init
							(not db-exists)))
				     (init-proc db))
				 db))
			     expire-time: 30)
                            (begin
			      (if (file-exists? fname )
                                  (let ((db (sqlite3:open-database fname)))
				    ;; pragmas synchronous not needed because this db is used read-only
				    ;; (sqlite3:execute db (conc "PRAGMA synchronous = "mode";")
				    (sqlite3:set-busy-handler! db (sqlite3:make-busy-timeout 30000)) ;; read-only but still need timeout
				    db )

	  (if (file-exists? fname)
	      (handle-exceptions exn
                #f 
                (with-input-from-file fname
	  	  (lambda ()
		    (equal? key-string (read-line)))))
              (begin
                (dbfile:print-err "dbfile:simple-file-lock created " fname " but it was gone 0.25 seconds later")
	         #f
              )
          )
       )
    )
  )
)

		       runname
		       (common:file-exists? fulldir))
		  (let ((tmpfile  (conc fulldir "/.megatest.cfg." (current-seconds)))
			(targfile (conc fulldir "/.megatest.cfg-"  megatest-version "-" megatest-fossil-hash))
			(rconfig  (conc fulldir "/.runconfig." megatest-version "-" megatest-fossil-hash)))
		    (if (common:file-exists? rconfig) ;; only cache megatest.config AFTER runconfigs has been cached
			(begin
			  (debug:print-info 2 *default-log-port* "Caching megatest.config in " tmpfile)
                          (if (not (common:in-running-test?))
                              (configf:write-alist *configdat* tmpfile))
			  (system (conc "ln -sf " tmpfile " " targfile))))
		    )))
	    (debug:print-info 1 *default-log-port* "No linktree yet, no caching configs.")))))

;;     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

;; Always use two or four digit decimal
;; 1.01, 1.02...1.10,1.11,1.1101 ... 1.99,2.00..

;; (declare (unit megatest-version))

(define megatest-version 1.8031)

 ;;(lambda params (apply rmt:send-receive params))) ;; make send-receive available to rmtmod via parameter


;; load the ~/.megatestrc file, put (use trace)(trace-call-sites #t)(trace function-you-want-to-trace) in this file
;;
(let ((debugcontrolf (conc (get-environment-variable "HOME") "/.megatestrc")))
  (if (common:file-exists? debugcontrolf)
    (begin
      ;; for some reason, debug:print does not work here. Had to use print.
      (print (conc "WARNING: loading " debugcontrolf))
      (load debugcontrolf)
    )
  )
)

;; usage logging, careful with this, it is not designed to deal with all real world challenges!
;;
(if (and *usage-log-file*
         (file-write-access? *usage-log-file*))
    (with-output-to-file
        *usage-log-file*

	(srfi 18) s11n)
(import (prefix sqlite3 sqlite3:))
(import debugprint dbmod)

;; lsof -i

(define (portlogger:open-db fname)
  (let* (;; (avail    (tasks:wait-on-journal fname 5 remove: #t)) ;; wait up to about 10 seconds for the journal to go away
         (avail #t)
	 (exists   (file-exists? fname))
	 (db       (if avail 
		       (sqlite3:open-database fname)
		       (begin
			 (system (conc "rm -f " fname))
			 (sqlite3:open-database fname))))
	 (handler  (sqlite3:make-busy-timeout 136000))

            port INTEGER PRIMARY KEY,
            state TEXT DEFAULT 'not-used',
            fail_count INTEGER DEFAULT 0,
            update_time TIMESTAMP DEFAULT (strftime('%s','now')) );")
    db))

(define (portlogger:open-run-close proc . params)
  (let* ((fname  (conc "/tmp/." (current-user-name) "-portlogger.db")))
	 ;; (avail  (tasks:wait-on-journal fname 10))) ;; wait up to about 10 seconds for the journal to go away
    (handle-exceptions
     exn
     (begin
       ;; (release-dot-lock fname)
       (debug:print-error 0 *default-log-port* "portlogger:open-run-close failed. " proc " " params)
       (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
       ;; (debug:print 5 *default-log-port* "exn=" (condition->list exn))

     (lambda (key)
       (let* ((idx (cadr key))
	      (fld (car  key))
	      (val (configf:lookup test-conf "test_meta" fld)))
	 ;; (debug:print 5 *default-log-port* "idx: " idx " fld: " fld " val: " val)
	 (if (and val (not (equal? (vector-ref currrecord idx) val)))
	     (begin
	       (debug:print 2 *default-log-port* "Updating " test-name " " fld " to " val)
	       (rmt:testmeta-update-field test-name fld val)))))
     '(("author" 2)("owner" 3)("description" 4)("reviewed" 5)("tags" 9)("jobgroup" 10)))))

;; find tests with matching tags, tagpatt is a string "tagpatt1,tagpatt2%, ..."
;;
(define (runs:get-tests-matching-tags tagpatt)
  (let* ((tagdata (rmt:get-tests-tags))

	 (goodfiles '()))

    ;; filter the files here by looking in processes table (if we are not main.db)
    ;; and or look at the time stamp on the servinfo file, a running server will
    ;; touch the file every minute (again, this will only apply for main.db)
    (for-each (lambda (fname)
		(let* ((age (- (current-seconds)(file-modification-time fname))))
		  (if (> age (tt-server-timeout-param)) ;; can't trust it if over server timeout old.
		      (begin
			(debug:print 0 *default-log-port* "WARNING: removing stale servinfo file "fname", it is "age" seconds old")
			(handle-exceptions
			 exn
			 (debug:print 0 *default-log-port* "WARNING: error attempting to remove stale servinfo file "fname)
			 (delete-file fname))) ;; 
		      (set! goodfiles (cons fname goodfiles)))))
	      sfiles)
    goodfiles))

;; given a path to a server info file return: host port startseconds server-id pid dbfname logf
;; example of what it's looking for in the file:
;;     SERVER STARTED: 10.38.175.67:50216 AT 1616502350.0 server-id: 4907e90fc55c7a09694e3f658c639cf4 
;;
(define (tt:server-get-info logf)
  (let ((server-rx    (regexp "^SERVER STARTED: (\\S+):(\\d+) AT ([\\d\\.]+) server-id: (\\S+) pid: (\\d+) dbfname: (\\S+)")) ;; SERVER STARTED: host:port AT timesecs server id


	(bad-dat      (list #f #f #f #f #f #f logf)))
     (let ((fdat     (handle-exceptions
			 exn
		       (begin
			 ;; BUG, TODO: add err checking, for now blanket ignore the errors?
			 (debug:print-info 0 *default-log-port* "Unable to get server info from "logf
					   ", exn="(condition->list exn))
			 '()) ;; no idea what went wrong, call it a bad server, return empty list
		       (with-input-from-file logf read-lines))))
       (if (null? fdat) ;; bad data, return bad-dat
	   bad-dat
	   (let loop ((inl  (car fdat))
		      (tail (cdr fdat))
		      (lnum 0))
	     (let ((mlst (string-match server-rx inl)))


	       (if (not mlst)
		   (if (> lnum 500) ;; give up if more than 500 lines of server log read
		       bad-dat
		       (if (null? tail)
			   bad-dat
			   (loop (car tail)(cdr tail)(+ lnum 1))))
		   (match mlst ;; have a not null list

  (let ((port (portlogger:open-run-close portlogger:find-port)))
    (assert (tt? uconn) "FATAL: setup-listener called with wrong struct "uconn)
    (debug:print 2 *default-log-port* "setup-listener-portlogger got port " port)
    (handle-exceptions
	exn
      (if (< port 65535)
	  (begin
            (debug:print 0 *default-log-port* "setup-listener-portlogger: exception finding port. Retrying")
	    (portlogger:open-run-close portlogger:set-failed port)
	    (thread-sleep! 0.25)
	    (setup-listener-portlogger uconn))
          (begin
            (assert #t "setup-listener-portlogger: could not get a port")
	    #f
          )
      )
      (debug:print 2 *default-log-port* "setup-listener-portlogger: got port " port)
      (connect-listener uconn port))))

(define (connect-listener uconn port)
  ;; (tcp-listener-socket LISTENER)(socket-name so)
  ;; sockaddr-address, sockaddr-port, sockaddr->string
  (let* ((tlsn (tcp-listen port 10000 #f)) ;; (tcp-listen TCPPORT [BACKLOG [HOST]])
	 (addr  (tt:get-best-guess-address (get-host-name)))) ;; (get-my-best-address))) ;; (hostinfo-addresses (host-information (current-hostname)))

		(if (and tcfg cache-file) (hash-table-set! tcfg "have fulldata" #t)) ;; mark this as fully read data
		(if tcfg (hash-table-set! *testconfigs* test-full-name tcfg))
		(if (and testexists
			 cache-file
			 (file-write-access? cache-path)
			 allow-write-cache)
		    (let ((tpath (conc cache-path "/.testconfig")))
		      (debug:print-info 2 *default-log-port* "Caching testconfig for " test-name " in " tpath)
                      (if (and tcfg (not (common:in-running-test?)))
                          (configf:write-alist tcfg tpath))))
		tcfg))))))
  
;; sort tests by priority and waiton
;; Move test specific stuff to a test unit FIXME one of these days
(define (tests:sort-by-priority-and-waiton test-records)