Megatest

# make install CSCOPTS='-accumulate-profile -profile-name $(PWD)/profile-ww$(shell date +%V.%u)'
PREFIX=$(PWD)
CSCOPTS= 
INSTALL=install
SRCFILES = common.scm items.scm launch.scm \
           ods.scm runconfig.scm server.scm configf.scm \
           db.scm keys.scm margs.scm megatest-version.scm \
           process.scm runs.scm tasks.scm tests.scm genexample.scm \

tests.o db.o launch.o runs.o dashboard-tests.o dashboard-guimonitor.o dashboard-main.o monitor.o dashboard.o megatest.o : db_records.scm
tests.o runs.o dashboard.o dashboard-tests.o dashboard-main.o  : run_records.scm
db.o ezsteps.o keys.o launch.o megatest.o monitor.o runs-for-ref.o runs.o tests.o : key_records.scm
tests.o tasks.o dashboard-tasks.o : task_records.scm
runs.o : test_records.scm
megatest.o : megatest-fossil-hash.scm

# Temporary while transitioning to new routine
runs.o : run-tests-queue-classic.scm  run-tests-queue-new.scm

megatest-fossil-hash.scm : $(SRCFILES) megatest.scm *_records.scm
	echo "(define megatest-fossil-hash \"$(MTESTHASH)\")" > megatest-fossil-hash.new
	if ! diff -q megatest-fossil-hash.new megatest-fossil-hash.scm ; then echo copying .new to .scm;cp -f megatest-fossil-hash.new megatest-fossil-hash.scm;fi

$(OFILES) $(GOFILES) : common_records.scm 

%.o : %.scm

1. All run control access to db is direct.
2. All test machines must have megatest available
3. Tests may or may not have file system access to the originating
   run area. rsync is used to pull the test area to the home host
   if and only if the originating area can not be seen via file 
   system. NO LONGER TRUE. Rsync is used but file system must be visible.
4. All db access is done via the home host. NOT IMPLEMENTED YET.

REMOTE ACCESS DB LOADS

INFO: (0) Max cached queries was    10
INFO: (0) Number of cached writes   27043
INFO: (0) Average cached write time 15.0634544983915 ms
INFO: (0) Number non-cached queries 71928
INFO: (0) Average non-cached time   5.15547491936381 ms
INFO: (0) Server shutdown complete. Exiting


fdktestqa on Apr 29, 2013: 1812 tests

INFO: (0) Max cached queries was    10
INFO: (0) Number of cached writes   41335
INFO: (0) Average cached write time 206.081553163179 ms
INFO: (0) Number non-cached queries 74289
INFO: (0) Average non-cached time   1055.09826488444 ms
INFO: (0) Server shutdown complete. Exiting

Start: 0 at Sun Apr 28 22:18:25 MST 2013
Max:  52 at Sun Apr 28 23:06:59 MST 2013
End:   6 at Sun Apr 28 23:47:51 MST 2013

(require-extension (srfi 18) extras tcp s11n)

(use sqlite3 srfi-1 posix regex regex-case srfi-69 hostinfo md5 message-digest)
;; (use zmq)

(import (prefix sqlite3 sqlite3:))

(use spiffy uri-common intarweb http-client spiffy-request-vars uri-common intarweb)

(declare (unit client))

(declare (uses common))
(declare (uses db))
(declare (uses tasks)) ;; tasks are where stuff is maintained about what is running.

    			       (string->symbol (tasks:hostinfo-get-transport hostinfo))
			       'fs))
    ;; ;; DEBUG STUFF
    ;; (if (eq? *transport-type* 'fs)(begin (print "ERROR!!!!!!! refusing to run with transport " *transport-type*)(exit 99)))
    
    (debug:print-info 11 "Using transport type of " *transport-type* (if hostinfo (conc " to connect to " hostinfo) ""))
    (case *transport-type* 
      ((fs) ;; (if (not *megatest-db*)(set! *megatest-db* (open-db))))
       ;; we are not doing fs any longer. let's cheat and start up a server
       ;; if we are falling back on fs (not 100% supported) do an about face and start a server
       (if (not (equal? (args:get-arg "-transport") "fs"))
	   (begin
	     (set! *transport-type* #f)
	     (system (conc "megatest -list-servers | grep " megatest-version " | grep alive || megatest -server - -daemonize && sleep 3"))
	     (thread-sleep! 1)
	     (if (> numtries 0)
		 (client:setup numtries: (- numtries 1))))))
      ((http)
       (http-transport:client-connect (tasks:hostinfo-get-interface hostinfo)
				      (tasks:hostinfo-get-port hostinfo)))
      ((zmq)
       (zmq-transport:client-connect (tasks:hostinfo-get-interface hostinfo)
				     (tasks:hostinfo-get-port      hostinfo)
				     (tasks:hostinfo-get-pubport   hostinfo)))

(define *logged-in-clients* (make-hash-table))
(define *client-non-blocking-mode* #f)
(define *server-id*         #f)
(define *server-info*       #f)
(define *time-to-exit*      #f)
(define *received-response* #f)
(define *default-numtries*  10)
(define *server-run*        #t)
(define *db-write-access*   #t)


(define *target*            (make-hash-table)) ;; cache the target here; target is keyval1/keyval2/.../keyvalN
(define *keys*              (make-hash-table)) ;; cache the keys here
(define *keyvals*           (make-hash-table))
(define *toptest-paths*     (make-hash-table)) ;; cache toptest path settings here
(define *test-paths*        (make-hash-table)) ;; cache test-id to test run paths here
(define *test-ids*          (make-hash-table)) ;; cache run-id, testname, and item-path => test-id

(define configf:key-sys-pr (regexp "^(\\S+)\\s+\\[system\\s+(\\S+.*)\\]\\s*$"))
(define configf:key-val-pr (regexp "^(\\S+)(\\s+(.*)|())$"))
(define configf:comment-rx (regexp "^\\s*#.*"))
(define configf:cont-ln-rx (regexp "^(\\s+)(\\S+.*)$"))

;; read a line and process any #{ ... } constructs

(define configf:var-expand-regex (regexp "^(.*)#\\{(scheme|system|shell|getenv|get|runconfigs-get|rget)\\s+([^\\}\\{]*)\\}(.*)"))
(define (configf:process-line l ht)
  (let loop ((res l))
    (if (string? res)
	(let ((matchdat (string-search configf:var-expand-regex res)))
	  (if matchdat
	      (let* ((prestr  (list-ref matchdat 1))
		     (cmdtype (list-ref matchdat 2)) ;; eval, system, shell, getenv

				((getenv)(conc "(lambda (ht)(get-environment-variable \"" cmd "\"))"))
				((get)   
				 (let* ((parts (string-split cmd))
					(sect  (car parts))
					(var   (cadr parts)))
				   (conc "(lambda (ht)(config-lookup ht \"" sect "\" \"" var "\"))")))
				((runconfigs-get) (conc "(lambda (ht)(runconfigs-get ht \"" cmd "\"))"))
				((rget)           (conc "(lambda (ht)(runconfigs-get ht \"" cmd "\"))"))
				(else "(lambda (ht)(print \"ERROR\") \"ERROR\")"))))
		;; (print "fullcmd=" fullcmd)
		(with-input-from-string fullcmd
		  (lambda ()
		    (set! result ((eval (read)) ht))))
		(loop (conc prestr result poststr)))
	      res))

	    (print "ERROR: " cmd " returned bad exit code " status))
	  ""))))

;; Lookup a value in runconfigs based on -reqtarg or -target
(define (runconfigs-get config var)
  (let ((targ (or (args:get-arg "-reqtarg")(args:get-arg "-target"))))
    (if targ
	(or (configf:lookup config targ var)
	    (configf:lookup config "default" var))
	(configf:lookup config "default" var))))

(define-inline (configf:read-line p ht allow-processing)
  (let loop ((inl (read-line p)))
    (if (and (string? inl)
	     (not (string-null? inl))
	     (equal? "\\" (string-take-right inl 1))) ;; last character is \ 
	(let ((nextl (read-line p)))
	  (if (not (eof-object? nextl))
	      (loop (string-append inl nextl))))
	(if (and allow-processing 
		 (not (eq? allow-processing 'return-string)))
	    (configf:process-line inl ht)
	    inl))))

;; read a config file, returns hash table of alists

;; read a config file, returns hash table of alists
;; adds to ht if given (must be #f otherwise)
;; envion-patt is a regex spec that identifies sections that will be eval'd
;; in the environment on the fly

	  (exit 1))
	(let* ((run-id        (if testdat (db:test-get-run_id testdat) #f))
	       (keydat        (if testdat (open-run-close db:get-key-val-pairs #f run-id) #f))
	       (rundat        (if testdat (open-run-close db:get-run-info #f run-id) #f))
	       (runname       (if testdat (db:get-value-by-header (db:get-row rundat)
								  (db:get-header rundat)
								  "runname") #f))

	       (logfile       "/this/dir/better/not/exist")
	       (rundir        logfile)
	       (teststeps     (if testdat (db:get-compressed-steps test-id work-area: rundir) '()))
	       (testfullname  (if testdat (db:test-get-fullname testdat) "Gathering data ..."))
	       (testname      (if testdat (db:test-get-testname testdat) "n/a"))
	       (testmeta      (if testdat 
				  (let ((tm (open-run-close db:testmeta-get-record #f testname)))
				    (if tm tm (make-db:testmeta)))
				  (make-db:testmeta)))

						 ";xterm -T \"" (string-translate testfullname "()" "  ") "\" " shell "&")))
				 (message-window  (conc "Directory " rundir " not found")))))
	       (refreshdat (lambda ()
			     (let* ((curr-mod-time (file-modification-time db-path))
				    (need-update   (or (and (> curr-mod-time db-mod-time)
							    (> (current-seconds) (+ last-update 2))) ;; every two seconds if db touched
						       request-update))
				    (newtestdat (if need-update 
						    (handle-exceptions
						     exn 
						     (debug:print-info 2 "test db access issue: " ((condition-property-accessor 'exn 'message) exn))
						     (open-run-close db:get-test-info-by-id #f test-id )))))
			       (cond
				((and need-update newtestdat)
				 (set! testdat newtestdat)
				 (set! teststeps    (db:get-compressed-steps test-id work-area: rundir))
				 (set! logfile      (conc (db:test-get-rundir testdat) "/" (db:test-get-final_logf testdat)))
				 (set! rundir       (db:test-get-rundir testdat))
				 (set! testfullname (db:test-get-fullname testdat))
				 ;; (debug:print 0 "INFO: teststeps=" (intersperse teststeps "\n    "))
				 )
				(need-update ;; if this was true and yet there is no data ....
				 (db:test-set-testname! testdat "DEAD OR DELETED TEST"))))))

							 )))))
			      lbl))
	       (store-button store-label)
	       (command-text-box (iup:textbox #:expand "HORIZONTAL" #:font "Courier New, -10"))
	       (command-launch-button (iup:button "Execute!" #:action (lambda (x)
									(let ((cmd (iup:attribute command-text-box "VALUE")))
									  (system (conc cmd "  &"))))))
	       (kill-jobs (lambda (x)
			    (iup:attribute-set! 
			     command-text-box "VALUE"
			     (conc "xterm -geometry 180x20 -e \"megatest -target " keystring " :runname "  runname 
				   " -set-state-status KILLREQ,n/a -testpatt %/% "
				   ;; (conc testname "/" (if (equal? item-path "") "%" item-path))
				   " :state RUNNING ;echo Press any key to continue;bash -c 'read -n 1 -s'\""))))
	       (run-test  (lambda (x)
			    (iup:attribute-set! 
			     command-text-box "VALUE"
			     (conc "xterm -geometry 180x20 -e \"megatest -target " keystring " :runname " runname 
				   " -runtests " (conc testname "/" (if (equal? item-path "")
									"%" 
									item-path))
				   " ;echo Press any key to continue;bash -c 'read -n 1 -s'\""))))
	       (remove-test (lambda (x)
			      (iup:attribute-set!
			       command-text-box "VALUE"
			       (conc "xterm -geometry 180x20 -e \"megatest -remove-runs -target " keystring " :runname " runname
				     " -testpatt " (conc testname "/" (if (equal? item-path "")
									  "%"
									  item-path))
				     " -v ;echo Press any key to continue;bash -c 'read -n 1 -s'\"")))))
	  (cond
	   ((not testdat)(begin (print "ERROR: bad test info for " test-id)(exit 1)))
	   ((not rundat)(begin (print "ERROR: found test info but there is a problem with the run info for " run-id)(exit 1)))
	   (else
	    ;;  (test-set-status! db run-id test-name state status itemdat)
	    (set! self ; 
		  (iup:dialog #:close_cb (lambda (a)(exit)) ; #:expand "YES"
			      #:title testfullname
			      (iup:vbox ; #:expand "YES"
			       ;; The run and test info
			       (iup:hbox  ; #:expand "YES"
				(run-info-panel keydat testdat runname)
				(test-info-panel testdat store-label widgets)
				(test-meta-panel testmeta store-meta))
			       (host-info-panel testdat store-label)
			       ;; The controls
			       (iup:frame #:title "Actions" 
					  (iup:vbox
					   (iup:hbox 
					    (iup:button "View Log"      #:action viewlog     #:size "80x")
					    (iup:button "Start Xterm"   #:action xterm       #:size "80x")
					    (iup:button "Run Test"      #:action run-test    #:size "80x")
					    (iup:button "Clean Test"    #:action remove-test #:size "80x")
					    (iup:button "Kill All Jobs" #:action kill-jobs   #:size "80x")
					    (iup:button "Close"         #:action (lambda (x)(exit)) #:size "80x"))
					   (apply 
					    iup:hbox
					    (list command-text-box command-launch-button))))
			       (set-fields-panel test-id testdat)
			       (let ((tabs 
				      (iup:tabs
				       ;; Replace here with matrix

								 (rownum 1)
								 (colnum 1))
							(let ((val (vector-ref hed (- colnum 1))))
							  (iup:attribute-set! steps-matrix  (conc rownum ":" colnum)(if val (conc val) ""))
							  (if (< colnum 6)
							      (loop hed tal rownum (+ colnum 1))
							      (if (not (null? tal))
								  (loop (car tal)(cdr tal)(+ rownum 1) 1))))
							(iup:attribute-set! steps-matrix "REDRAW" "ALL"))))))
					   (hash-table-set! widgets "StepsMatrix" proc)
					   (proc testdat))
					 steps-matrix)
				       ;; populate the Test Data panel
				       (iup:frame
					#:title "Test Data"
					(let ((test-data

(define toplevel #f)
(define dlg      #f)
(define max-test-num 0)
;; (define *keys*   (open-run-close db:get-keys #f))
(define *keys*   (cdb:remote-run db:get-keys #f))
;; (define *keys*   (db:get-keys   *db*))

(define *dbkeys*  (append *keys* (list "runname")))

(define *header*       #f)
(define *allruns*     '())
(define *allruns-by-id* (make-hash-table)) ;; 
(define *runchangerate* (make-hash-table))

(define *buttondat*    (make-hash-table)) ;; <run-id color text test run-key>
(define *alltestnamelst* '())

  (if (not *toppath*)
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "ERROR: Attempted to open db when not in megatest area. Exiting.")
	    (exit))))
  (let* ((dbpath    (conc *toppath* "/megatest.db")) ;; fname)
	 (dbexists  (file-exists? dbpath))
	 (write-access (file-write-access? dbpath))
	 (db        (sqlite3:open-database dbpath)) ;; (never-give-up-open-db dbpath))
	 (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					   (string->number (args:get-arg "-override-timeout"))
					   136000)))) ;; 136000))) ;; 136000 = 2.2 minutes
    (if (and dbexists
	     (not write-access))
	(set! *db-write-access* write-access)) ;; only unset so other db's also can use this control
    (debug:print-info 11 "open-db, dbpath=" dbpath " argv=" (argv))
    (sqlite3:set-busy-handler! db handler)
    (if (not dbexists)
	(db:initialize db))
    (db:set-sync db)
    db))

	  (set! *last-global-delta-printed* *global-delta*)))
    (debug:print-info 11 "open-run-close-measure END" )
    res))

(define (db:initialize db)
  (debug:print-info 11 "db:initialize START")
  (let* ((configdat (car *configinfo*))  ;; tut tut, global warning...
	 (keys     (keys:config-get-fields configdat))
	 (havekeys (> (length keys) 0))
	 (keystr   (keys->keystr keys))
	 (fieldstr (keys->key/field keys)))
    (for-each (lambda (key)
		(let ((keyn key))
		  (if (member (string-downcase keyn)
			      (list "runname" "state" "status" "owner" "event_time" "comment" "fail_count"
				    "pass_count"))
		      (begin
			(print "ERROR: your key cannot be named " keyn " as this conflicts with the same named field in the runs table")
			(system (conc "rm -f " dbpath))
			(exit 1)))))
	      keys)
    ;; (sqlite3:execute db "PRAGMA synchronous = OFF;")
    (db:set-sync db)
    (sqlite3:execute db "CREATE TABLE IF NOT EXISTS keys (id INTEGER PRIMARY KEY, fieldname TEXT, fieldtype TEXT, CONSTRAINT keyconstraint UNIQUE (fieldname));")
    (for-each (lambda (key)
		(sqlite3:execute db "INSERT INTO keys (fieldname,fieldtype) VALUES (?,?);" key "TEXT"))
	      keys)
    (sqlite3:execute db (conc 
			 "CREATE TABLE IF NOT EXISTS runs (id INTEGER PRIMARY KEY, " 
			 fieldstr (if havekeys "," "")
			 "runname TEXT,"
			 "state TEXT DEFAULT '',"
			 "status TEXT DEFAULT '',"

    ))

;;======================================================================
;; T E S T   S P E C I F I C   D B 
;;======================================================================

;; Create the sqlite db for the individual test(s)
(define (open-test-db work-area) 
  (debug:print-info 11 "open-test-db " work-area)
  (if (and work-area 
	   (directory? work-area)
	   (file-read-access? work-area))
      (let* ((dbpath    (conc work-area "/testdat.db"))
	     (dbexists  (file-exists? dbpath))
	     (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					       (string->number (args:get-arg "-override-timeout"))
					       136000))))
	(handle-exceptions
	 exn
	 (begin
	   (debug:print 0 "ERROR: problem accessing test db " work-area ", you probably should clean and re-run this test"
			((condition-property-accessor 'exn 'message) exn))
	   #f)
	 (set! db (sqlite3:open-database dbpath)))
	(sqlite3:set-busy-handler! db handler)
	(if (not dbexists)
	    (begin
	      (sqlite3:execute db "PRAGMA synchronous = FULL;")
	      (debug:print-info 11 "Initialized test database " dbpath)
	      (db:testdb-initialize db)))
	;; (sqlite3:execute db "PRAGMA synchronous = 0;")
	(debug:print-info 11 "open-test-db END (sucessful)" work-area)
	;; now let's test that everything is correct
	(handle-exceptions
	 exn
	 (begin
	   (debug:print 0 "ERROR: problem accessing test db " work-area ", you probably should clean and re-run this test"
			((condition-property-accessor 'exn 'message) exn))
	   #f)
	 ;; Is there a cheaper single line operation that will check for existance of a table
	 ;; and raise an exception ?
	 (sqlite3:execute db "SELECT id FROM test_data LIMIT 1;"))
	db)
      (begin
	(debug:print-info 11 "open-test-db END (unsucessful)" work-area)
	#f)))

;; find and open the testdat.db file for an existing test
(define (db:open-test-db-by-test-id db test-id #!key (work-area #f))
  (let* ((test-path (if work-area
			work-area
			(cdb:remote-run db:test-get-rundir-from-test-id db test-id))))
    (debug:print 3 "TEST PATH: " test-path)
    (open-test-db test-path)))

(define (db:testdb-initialize db)
  (debug:print 11 "db:testdb-initialize START")
  (for-each
   (lambda (sqlcmd)

  (debug:print-info 11 "db:set-var END " var " " val))

(define (db:del-var db var)
  (debug:print-info 11 "db:del-var START " var)
  (sqlite3:execute db "DELETE FROM metadat WHERE var=?;" var)
  (debug:print-info 11 "db:del-var END " var))

;; use a global for some primitive caching, it is just silly to
;; re-read the db over and over again for the keys since they never
;; change

;; why get the keys from the db? why not get from the *configdat*
;; using keys:config-get-fields?

(define (db:get-keys db)
  (if *db-keys* *db-keys* 
      (let ((res '()))

	(sqlite3:for-each-row 
	 (lambda (key)
	   (set! res (cons key res)))
	 db
	 "SELECT fieldname FROM keys ORDER BY id DESC;")
	(set! *db-keys* res)

	res)))

(define (db:get-value-by-header row header field)
  (debug:print-info 4 "db:get-value-by-header row: " row " header: " header " field: " field)
  (if (null? header) #f
      (let loop ((hed (car header))
		 (tal (cdr header))
		 (n   0))
	(if (equal? hed field)
	    (vector-ref row n)
	    (if (null? tal) #f (loop (car tal)(cdr tal)(+ n 1)))))))

;;======================================================================
;;  R U N S
;;======================================================================

(define (db:get-run-name-from-id db run-id)
  (let ((res #f))
    (sqlite3:for-each-row
     (lambda (runname)
       (set! res runname))
     db
     "SELECT runname FROM runs WHERE id=?;"
     run-id)
    res))

(define (db:get-run-key-val db run-id key)
  (let ((res #f))
    (sqlite3:for-each-row
     (lambda (val)
       (set! res val))
     db 
     (conc "SELECT " key " FROM runs WHERE id=?;")
     run-id)
    res))

;; keys list to key1,key2,key3 ...
(define (runs:get-std-run-fields keys remfields)
  (let* ((header    (append keys remfields))

	 (keystr    (conc (keys->keystr keys) ","
			  (string-intersperse remfields ","))))
    (list keystr header)))

;; make a query (fieldname like 'patt1' OR fieldname 
(define (db:patt->like fieldname pattstr #!key (comparator " OR "))
  (let ((patts (if (string? pattstr)
		   (string-split pattstr ",")
		   '("%"))))
    (string-intersperse (map (lambda (patt)
			       (let ((wildtype (if (substring-index "%" patt) "LIKE" "GLOB")))
				 (conc fieldname " " wildtype " '" patt "'")))
			     (if (null? patts)
				 '("")
				 patts))
			comparator)))


;; register a test run with the db
(define (db:register-run db keyvals runname state status user)
  (debug:print 3 "runs:register-run runname: " runname " state: " state " status: " status " user: " user)
  (let* ((keys      (map car keyvals))
	 (keystr    (keys->keystr keys))	 
	 (comma     (if (> (length keys) 0) "," ""))
	 (andstr    (if (> (length keys) 0) " AND " ""))
	 (valslots  (keys->valslots keys)) ;; ?,?,? ...
	 (allvals   (append (list runname state status user) (map cadr keyvals)))
	 (qryvals   (append (list runname) (map cadr keyvals)))
	 (key=?str  (string-intersperse (map (lambda (k)(conc k "=?")) keys) " AND ")))
    (debug:print 3 "keys: " keys " allvals: " allvals " keyvals: " keyvals " key=?str is " key=?str)
    (debug:print 2 "NOTE: using target " (string-intersperse (map cadr keyvals) "/") " for this run")
    (if (and runname (null? (filter (lambda (x)(not x)) keyvals))) ;; there must be a better way to "apply and"
	(let ((res #f))
	  (apply sqlite3:execute db (conc "INSERT OR IGNORE INTO runs (runname,state,status,owner,event_time" comma keystr ") VALUES (?,?,?,?,strftime('%s','now')" comma valslots ");")
		 allvals)
	  (apply sqlite3:for-each-row 
	   (lambda (id)
	     (set! res id))
	   db
	   (let ((qry (conc "SELECT id FROM runs WHERE (runname=? " andstr key=?str ");")))
	     ;(debug:print 4 "qry: " qry) 
	     qry)
	   qryvals)
	  (sqlite3:execute db "UPDATE runs SET state=?,status=? WHERE id=?;" state status res)
	  res) 
	(begin
	  (debug:print 0 "ERROR: Called without all necessary keys")
	  #f))))


;; replace header and keystr with a call to runs:get-std-run-fields
;;
;; keypatts: ( (KEY1 "abc%def")(KEY2 "%") )
;; runpatts: patt1,patt2 ...
;;
(define (db:get-runs db runpatt count offset keypatts)
  (let* ((res       '())
	 (keys       (db:get-keys db))
	 (runpattstr (db:patt->like "runname" runpatt))
	 (remfields  (list "id" "runname" "state" "status" "owner" "event_time"))
	 (header     (append keys remfields))

	 (keystr     (conc (keys->keystr keys) ","
		           (string-intersperse remfields ",")))
	 (qrystr     (conc "SELECT " keystr " FROM runs WHERE (" runpattstr ") " ;; runname LIKE ? "
		           ;; Generate: " AND x LIKE 'keypatt' ..."
		           (if (null? keypatts) ""
		               (conc " AND "
				     (string-join 

;; use (get-value-by-header (db:get-header runinfo)(db:get-row runinfo))
(define (db:get-run-info db run-id)
  ;;(if (hash-table-ref/default *run-info-cache* run-id #f)
  ;;    (hash-table-ref *run-info-cache* run-id)
      (let* ((res      #f)
	     (keys      (db:get-keys db))
	     (remfields (list "id" "runname" "state" "status" "owner" "event_time"))
	     (header    (append keys remfields))

	     (keystr    (conc (keys->keystr keys) ","
			      (string-intersperse remfields ","))))
	(debug:print-info 11 "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
	(sqlite3:for-each-row
	 (lambda (a . x)
	   (set! res (apply vector a x)))
	 db

;;======================================================================
;; K E Y S
;;======================================================================

;; get key val pairs for a given run-id
;; ( (FIELDNAME1 keyval1) (FIELDNAME2 keyval2) ... )
(define (db:get-key-val-pairs db run-id)
  (let* ((keys (db:get-keys db))
	 (res  '()))
    (debug:print-info 11 "db:get-key-val-pairs START keys: " keys " run-id: " run-id)
    (for-each 
     (lambda (key)
       (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	 ;; (debug:print 0 "qry: " qry)
	 (sqlite3:for-each-row 
	  (lambda (key-val)
	    (set! res (cons (list key key-val) res)))
	  db qry run-id)))
     keys)
    (debug:print-info 11 "db:get-key-val-pairs END keys: " keys " run-id: " run-id)
    (reverse res)))

;; get key vals for a given run-id
(define (db:get-key-vals db run-id)
  (let ((mykeyvals (hash-table-ref/default *keyvals* run-id #f)))
    (if mykeyvals 
	mykeyvals
	(let* ((keys (db:get-keys db))
	       (res  '()))
	  (debug:print-info 11 "db:get-key-vals START keys: " keys " run-id: " run-id)
	  (for-each 
	   (lambda (key)
	     (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	       ;; (debug:print 0 "qry: " qry)
	       (sqlite3:for-each-row 
		(lambda (key-val)
		  (set! res (cons key-val res)))
		db qry run-id)))
	   keys)
	  (debug:print-info 11 "db:get-key-vals END keys: " keys " run-id: " run-id)

	  (hash-table-set! *target* run-id thekey)
	  thekey))))

;;======================================================================
;;  T E S T S
;;======================================================================
















;; states and statuses are lists, turn them into ("PASS","FAIL"...) and use NOT IN
;; i.e. these lists define what to NOT show.
;; states and statuses are required to be lists, empty is ok
;; not-in #t = above behaviour, #f = must match
(define (db:get-tests-for-run db run-id testpatt states statuses 
			      #!key (not-in #t)
			      (sort-by #f) ;; 'rundir 'event_time

     db 
     qry
     )
    (debug:print-info 11 "db:get-tests-for-run START run-ids=" run-ids ", testpatt=" testpatt ", states=" states ", statuses=" statuses ", not-in=" not-in ", sort-by=" sort-by)
    res))

;; this one is a bit broken BUG FIXME
(define (db:delete-test-step-records db test-id #!key (work-area #f))
  ;; Breaking it into two queries for better file access interleaving
  (let* ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area)))
    ;; test db's can go away - must check every time
    (if tdb
	(begin
	  (sqlite3:execute tdb "DELETE FROM test_steps;")
	  (sqlite3:execute tdb "DELETE FROM test_data;")
	  (sqlite3:finalize! tdb)))))

(define (db:delete-old-deleted-test-records db)
  (let ((targtime (- (current-seconds)(* 30 24 60 60)))) ;; one month in the past
    (sqlite3:execute db "DELETE FROM tests WHERE state='DELETED' AND event_time<?;" targtime)))

;; set tests with state currstate and status currstatus to newstate and newstatus
;; use currstate = #f and or currstatus = #f to apply to any state or status respectively
;; WARNING: SQL injection risk. NB// See new but not yet used "faster" version below
;;
(define (db:set-tests-state-status db run-id testnames currstate currstatus newstate newstatus)
  (for-each (lambda (testname)
	      (let ((qry (conc "UPDATE tests SET state=?,status=? WHERE "
			       (if currstate  (conc "state='" currstate "' AND ") "")
			       (if currstatus (conc "status='" currstatus "' AND ") "")
			       " run_id=? AND testname=? AND NOT (item_path='' AND testname in (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")))
		;;(debug:print 0 "QRY: " qry)
		(sqlite3:execute db qry run-id newstate newstatus testname testname)))
	    testnames))


(define (cdb:set-tests-state-status-faster serverdat run-id testnames currstate currstatus newstate newstatus)
  ;; Convert #f to wildcard %
  (if (null? testnames)
      #t
      (let ((currstate  (if currstate currstate "%"))
	    (currstatus (if currstatus currstatus "%")))
	(let loop ((hed (car testnames))
		   (tal (cdr testnames))
		   (thr '()))
	  (let ((th1 (if newstate  (create-thread (cbd:client-call serverdat 'update-test-state  #t *default-numtries* newstate  currstate  run-id testname testname)) #f))
		(th2 (if newstatus (create-thread (cbd:client-call serverdat 'update-test-status #t *default-numtries* newstatus currstatus run-id testname testname)) #f)))
	    (thread-start! th1)
	    (thread-start! th2)
	    (if (null? tal)
		(loop (car tal)(cdr tal)(cons th1 (cons th2 thr)))
		(for-each
		 (lambda (th)
		   (if th (thread-join! th)))
		 thr)))))))

(define (cdb:delete-tests-in-state serverdat run-id state)
  (cdb:client-call serverdat 'delete-tests-in-state #t *default-numtries* run-id state))

(define (cdb:tests-update-cpuload-diskfree serverdat test-id cpuload diskfree)
  (cdb:client-call serverdat 'update-cpuload-diskfree #t *default-numtries* cpuload diskfree test-id))

(define (cdb:tests-update-run-duration serverdat test-id minutes)
  (cdb:client-call serverdat 'update-run-duration #t *default-numtries* minutes test-id))

(define (cdb:tests-update-uname-host serverdat test-id uname hostname)
  (cdb:client-call serverdat 'update-uname-host #t *default-numtries* test-id uname hostname))

;; speed up for common cases with a little logic
(define (db:test-set-state-status-by-id db test-id newstate newstatus newcomment)
  (cond
   ((and newstate newstatus newcomment)
    (sqlite3:exectute db "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;" newstate newstatus test-id))
   ((and newstate newstatus)
    (sqlite3:execute db "UPDATE tests SET state=?,status=? WHERE id=?;" newstate newstatus test-id))

     run-id testname item-path)
    res))

(define db:get-test-id db:get-test-id-not-cached)

;; given a test-info record, patch in the latest data from the testdat.db file
;; found in the test run directory
;;
;; NOT USED
;;
(define (db:patch-tdb-data-into-test-info db test-id res #!key (work-area #f))
  (let ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area)))
    ;; get state and status from megatest.db in real time
    ;; other fields that perhaps should be updated:
    ;;   fail_count
    ;;   pass_count
    ;;   final_logf
    (sqlite3:for-each-row
     (lambda (state status final_logf)

	    (query-sig   (message-digest-string (md5-primitive) (conc qtype immediate params)))
	    (zdat        (db:obj->string (vector client-sig qtype immediate query-sig params (current-seconds))))) ;; (with-output-to-string (lambda ()(serialize params))))
       (debug:print-info 11 "zdat=" zdat)
       (let* ((res  #f)
	      (rawdat      (http-transport:client-send-receive serverdat zdat))
	      (tmp         #f))
	 (debug:print-info 11 "Sent " zdat ", received " rawdat)
	 (if rawdat
	     (begin
	       (set! tmp (db:string->obj rawdat))
	       (vector-ref tmp 2))
	     (begin
	       (debug:print 0 "ERROR: Communication with the server failed. Exiting if possible")
	       (exit 1))))))
    ((zmq)
     (handle-exceptions
      exn
      (begin
	(debug:print-info 0 "cdb:client-call timeout or error. Trying again in 5 seconds")
	(thread-sleep! 5) 
	(if (> numretries 0)(apply cdb:client-call serverdat qtype immediate (- numretries 1) params)))
      (let* ((push-socket (vector-ref serverdat 0))
	     (sub-socket  (vector-ref serverdat 1))
	     (client-sig  (client:get-signature))
	     (query-sig   (message-digest-string (md5-primitive) (conc qtype immediate params)))
	     (zdat        (db:obj->string (vector client-sig qtype immediate query-sig params (current-seconds)))) ;; (with-output-to-string (lambda ()(serialize params))))

			       ;; this should match (client:get-signature)
			       ;; we will need to process "all" messages here some day
			       (receive-message* sub-socket)
			       ;; now get the actual message
			       (let ((myres (db:string->obj (receive-message* sub-socket))))
				 (if (equal? query-sig (vector-ref myres 1))
				     (set! res (vector-ref myres 2))
				     (loop)))))))
	    ;; (timeout (lambda ()
	    ;;     	(let loop ((n numretries))
	    ;;     	  (thread-sleep! 15)
	    ;;     	  (if (not res)
	    ;;     	      (if (> numretries 0)
	    ;;     		  (begin
	    ;;     		    (debug:print 2 "WARNING: no reply to query " params ", trying resend")
	    ;;     		    (debug:print-info 11 "re-sending message")
	    ;;     		    (send-message push-socket zdat)
	    ;;     		    (debug:print-info 11 "message re-sent")
	    ;;     		    (loop (- n 1)))
	    ;;     		  ;; (apply cdb:client-call *runremote* qtype immediate (- numretries 1) params))
	    ;;     		  (begin
	    ;;     		    (debug:print 0 "ERROR: cdb:client-call timed out " params ", exiting.")
	    ;;     		    (exit 5))))))))
	(debug:print-info 11 "Starting threads")
	(let ((th1 (make-thread send-receive "send receive"))
	      ;; (th2 (make-thread timeout      "timeout"))
	      )
	  (thread-start! th1)
	  ;; (thread-start! th2)
	  (thread-join!  th1)
	  (debug:print-info 11 "cdb:client-call returning res=" res)
	  res))))))
  
(define (cdb:set-verbosity serverdat val)
  (cdb:client-call serverdat 'set-verbosity #f *default-numtries* val))

(define (cdb:test-rollup-test_data-pass-fail serverdat test-id)
  (cdb:client-call serverdat 'test_data-pf-rollup #t *default-numtries* test-id test-id test-id test-id))

(define (cdb:pass-fail-counts serverdat test-id fail-count pass-count)
  (cdb:client-call serverdat 'pass-fail-counts #t *default-numtries* fail-count pass-count test-id))

(define (cdb:tests-register-test serverdat run-id test-name item-path)



  (cdb:client-call serverdat 'register-test #t *default-numtries* run-id test-name item-path))

(define (cdb:flush-queue serverdat)
  (cdb:client-call serverdat 'flush #f *default-numtries*))

(define (cdb:kill-server serverdat pid)
  (cdb:client-call serverdat 'killserver #t *default-numtries* pid))

(define (cdb:roll-up-pass-fail-counts serverdat run-id test-name item-path status)
  (cdb:client-call serverdat 'immediate #f *default-numtries* open-run-close db:roll-up-pass-fail-counts #f run-id test-name item-path status))

(define (cdb:get-test-info serverdat run-id test-name item-path)
  (cdb:client-call serverdat 'immediate #f *default-numtries* open-run-close db:get-test-info #f run-id test-name item-path))

	   (debug:print 2 "Found path: " path)
	   (debug:print 2 "No such path: " path)))
     db
     "SELECT rundir,final_logf FROM tests WHERE run_id=? AND testname=? AND item_path='';"
     run-id test-name)
    res))

;;======================================================================
;; A G R E G A T E D   T R A N S A C T I O N   D B   W R I T E S 
;;======================================================================

(define db:queries 
  (list '(register-test          "INSERT OR IGNORE INTO tests (run_id,testname,event_time,item_path,state,status) VALUES (?,?,strftime('%s','now'),?,'NOT_STARTED','n/a');")
	'(state-status           "UPDATE tests SET state=?,status=? WHERE id=?;")
	'(state-status-msg       "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;")
	'(pass-fail-counts       "UPDATE tests SET fail_count=?,pass_count=? WHERE id=?;")
	;; test_data-pf-rollup is used to set a tests PASS/FAIL based on the pass/fail info from the steps
	'(test_data-pf-rollup    "UPDATE tests
                                    SET status=CASE WHEN (SELECT fail_count FROM tests WHERE id=?) > 0 
                                      THEN 'FAIL'
                                    WHEN (SELECT pass_count FROM tests WHERE id=?) > 0 AND 
                                      (SELECT status FROM tests WHERE id=?) NOT IN ('WARN','FAIL')
                                    THEN 'PASS'
                                    ELSE status
                                    END WHERE id=?;")
	'(test-set-log            "UPDATE tests SET final_logf=? WHERE id=?;")
	'(test-set-rundir-by-test-id "UPDATE tests SET rundir=? WHERE id=?")
	'(test-set-rundir         "UPDATE tests SET rundir=? WHERE run_id=? AND testname=? AND item_path=?;")
	'(delete-tests-in-state   "DELETE FROM tests WHERE state=? AND run_id=?;")
	'(tests:test-set-toplog   "UPDATE tests SET final_logf=? WHERE run_id=? AND testname=? AND item_path='';")
	'(update-cpuload-diskfree "UPDATE tests SET cpuload=?,diskfree=? WHERE id=?;")
	'(update-run-duration     "UPDATE tests SET run_duration=? WHERE id=?;")
	'(update-uname-host       "UPDATE tests SET uname=?,host=? WHERE id=?;")
	'(update-test-state       "UPDATE tests SET state=? WHERE state=? AND run_id=? AND testname=? AND NOT (item_path='' AND testname IN (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")
	'(update-test-status      "UPDATE tests SET status=? WHERE status like ? AND run_id=? AND testname=? AND NOT (item_path='' AND testname IN (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")
    ))

;; do not run these as part of the transaction
(define db:special-queries   '(rollup-tests-pass-fail
			       db:roll-up-pass-fail-counts
                               login
                               immediate

			     (hash-table-set! *logged-in-clients* client-key (current-seconds))
			     (server:reply return-address qry-sig #t '(#t "successful login")))      ;; path matches - pass! Should vet the caller at this time ...
			   (server:reply return-address qry-sig #f (list #f (conc "Login failed due to mismatch paths: " calling-path ", " *toppath*)))))))
		((flush sync)
		 (server:reply return-address qry-sig #t 1)) ;; (length data)))
		((set-verbosity)
		 (set! *verbosity* (car params))
		 (server:reply return-address qry-sig #t (list #t *verbosity*)))
		((killserver)
		 (let ((hostname (car  *runremote*))
		       (port     (cadr *runremote*))
		       (pid      (car params)))
		   (debug:print 0 "WARNING: Server on " hostname ":" port " going down by user request!")
		   (debug:print-info 1 "current pid=" (current-process-id))
		   (open-run-close tasks:server-deregister tasks:open-db 

				   hostname
				   port: port)
		   (set! *server-run* #f)
		   (thread-sleep! 3)
		   (process-signal pid signal/kill)
		   (server:reply return-address qry-sig #t '(#t "exit process started"))))
		(else ;; not a command, i.e. is a query
		 (debug:print 0 "ERROR: Unrecognised query/command " stmt-key)
		 (server:reply return-address qry-sig #f 'failed)))))
	   (else
	    (debug:print-info 11 "Executing " stmt-key " for " params)
	    (apply sqlite3:execute (hash-table-ref queries stmt-key) params)
	    (server:reply return-address qry-sig #t #t)))))))

(define (db:testmeta-update-field db testname field value)
  (sqlite3:execute db (conc "UPDATE test_meta SET " field "=? WHERE testname=?;") value testname))

;;======================================================================
;; T E S T   D A T A 
;;======================================================================

(define (db:csv->test-data db test-id csvdata #!key (work-area #f))
  (debug:print 4 "test-id " test-id ", csvdata: " csvdata)
  (let ((tdb     (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if tdb
	(let ((csvlist (csv->list (make-csv-reader
				   (open-input-string csvdata)
				   '((strip-leading-whitespace? #t)
				     (strip-trailing-whitespace? #t)) )))) ;; (csv->list csvdata)))
	  (for-each 
	   (lambda (csvrow)

			       ((<)  (if (<  value expected) "pass" "fail"))
			       ((>=) (if (>= value expected) "pass" "fail"))
			       ((<=) (if (<= value expected) "pass" "fail"))
			       (else (conc "ERROR: bad tol comparator " tol))))))
	       (debug:print 4 "AFTER2: category: " category " variable: " variable " value: " value 
			    ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment)
	       (sqlite3:execute tdb "INSERT OR REPLACE INTO test_data (test_id,category,variable,value,expected,tol,units,comment,status,type) VALUES (?,?,?,?,?,?,?,?,?,?);"
				test-id category variable value expected tol units (if comment comment "") status type)))
	   csvlist)
	  (sqlite3:finalize! tdb)))))


;; get a list of test_data records matching categorypatt
(define (db:read-test-data db test-id categorypatt #!key (work-area #f))
  (let ((tdb  (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if tdb
	(let ((res '()))
	  (sqlite3:for-each-row 
	   (lambda (id test_id category variable value expected tol units comment status type)
	     (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	   tdb
	   "SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
	  (sqlite3:finalize! tdb)
	  (reverse res))
	'())))

;; NOTE: Run this local with #f for db !!!
(define (db:load-test-data db test-id #!key (work-area #f))
  (let loop ((lin (read-line)))
    (if (not (eof-object? lin))
	(begin
	  (debug:print 4 lin)
	  (db:csv->test-data db test-id lin work-area: work-area)
	  (loop (read-line)))))
  ;; roll up the current results.
  ;; FIXME: Add the status to 
  (db:test-data-rollup db test-id #f work-area: work-area))

;; WARNING: Do NOT call this for the parent test on an iterated test
;; Roll up test_data pass/fail results
;; look at the test_data status field, 
;;    if all are pass (any case) and the test status is PASS or NULL or '' then set test status to PASS.
;;    if one or more are fail (any case) then set test status to PASS, non "pass" or "fail" are ignored
(define (db:test-data-rollup db test-id status #!key (work-area #f))
  (let ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area))
	(fail-count 0)
	(pass-count 0))
    (if tdb
	(begin
	  (sqlite3:for-each-row
	   (lambda (fcount pcount)
	     (set! fail-count fcount)

;; S T E P S 
;;======================================================================

(define (db:step-get-time-as-string vec)
  (seconds->time-string (db:step-get-event_time vec)))

;; db-get-test-steps-for-run
(define (db:get-steps-for-test db test-id #!key (work-area #f))
  (let* ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (res '()))
    (if tdb
	(begin
	  (sqlite3:for-each-row 
	   (lambda (id test-id stepname state status event-time logfile)
	     (set! res (cons (vector id test-id stepname state status event-time (if (string? logfile) logfile "")) res)))
	   tdb
	   "SELECT id,test_id,stepname,state,status,event_time,logfile FROM test_steps WHERE test_id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
	   test-id)
	  (sqlite3:finalize! tdb)
	  (reverse res))
	'())))

;; get a pretty table to summarize steps
;;
(define (db:get-steps-table db test-id #!key (work-area #f))
  (let ((steps   (db:get-steps-for-test db test-id work-area: work-area)))
    ;; organise the steps for better readability
    (let ((res (make-hash-table)))
      (for-each 
       (lambda (step)
	 (debug:print 6 "step=" step)
	 (let ((record (hash-table-ref/default 
			res 

		      ((eq? (db:step-get-event_time a)(db:step-get-event_time b)) 
		       (<   (db:step-get-id a)        (db:step-get-id b)))
		      (else #f)))))
      res)))

;; get a pretty table to summarize steps
;;
(define (db:get-steps-table-list db test-id #!key (work-area #f))
  (let ((steps   (db:get-steps-for-test db test-id work-area: work-area)))
    ;; organise the steps for better readability
    (let ((res (make-hash-table)))
      (for-each 
       (lambda (step)
	 (debug:print 6 "step=" step)
	 (let ((record (hash-table-ref/default 
			res 

		     (cond
		      ((<   (db:step-get-event_time a)(db:step-get-event_time b)) #t)
		      ((eq? (db:step-get-event_time a)(db:step-get-event_time b)) 
		       (<   (db:step-get-id a)        (db:step-get-id b)))
		      (else #f)))))
      res)))

(define (db:get-compressed-steps test-id #!key (work-area #f))
  (if (or (not work-area)
	  (file-exists? (conc work-area "/testdat.db")))
      (let* ((comprsteps (open-run-close db:get-steps-table #f test-id work-area: work-area)))
	(map (lambda (x)
	       ;; take advantage of the \n on time->string
	       (vector
		(vector-ref x 0)
		(let ((s (vector-ref x 1)))
		  (if (number? s)(seconds->time-string s) s))
		(let ((s (vector-ref x 2)))
		  (if (number? s)(seconds->time-string s) s))
		(vector-ref x 3)    ;; status
		(vector-ref x 4)
		(vector-ref x 5)))  ;; time delta
	     (sort (hash-table-values comprsteps)
		   (lambda (a b)
		     (let ((time-a (vector-ref a 1))
			   (time-b (vector-ref b 1)))
		       (if (and (number? time-a)(number? time-b))
			   (if (< time-a time-b)
			       #t
			       (if (eq? time-a time-b)
				   (string<? (conc (vector-ref a 2))
					     (conc (vector-ref b 2)))
				   #f))
			   (string<? (conc time-a)(conc time-b))))))))
      '()))

;;======================================================================
;; M I S C   M A N A G E M E N T   I T E M S 
;;======================================================================

;; the new prereqs calculation, looks also at itempath if specified
;; all prereqs must be met:
;;    if prereq test with itempath='' is COMPLETED and PASS, WARN, CHECK, or WAIVED then prereq is met
;;    if prereq test with itempath=ref-item-path and COMPLETED with PASS, WARN, CHECK, or WAIVED then prereq is met
;;

;; Note: mode 'normal means that tests must be COMPLETED and ok (i.e. PASS, WARN, CHECK, SKIP or WAIVED)
;;       mode 'toplevel means that tests must be COMPLETED only
;;       mode 'itemmatch means that tests items must be COMPLETED and (PASS|WARN|WAIVED|CHECK) [[ NB// NOT IMPLEMENTED YET ]]
;; 
(define (db:get-prereqs-not-met run-id waitons ref-item-path #!key (mode 'normal))
  (if (or (not waitons)
	  (null? waitons))
      '()
      (let* ((unmet-pre-reqs '())
	     (result         '()))
	(for-each 
	 (lambda (waitontest-name)
	   ;; by getting the tests with matching name we are looking only at the matching test 
	   ;; and related sub items
	   (let ((tests             (cdb:remote-run db:get-tests-for-run #f run-id waitontest-name '() '()))
		 (ever-seen         #f)
		 (parent-waiton-met #f)
		 (item-waiton-met   #f))
	     (for-each 
	      (lambda (test)
		;; (if (equal? waitontest-name (db:test-get-testname test)) ;; by defintion this had better be true ...
		(let* ((state             (db:test-get-state test))

	     ;; if the test is not found then clearly the waiton is not met...
	     ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
	     (if (not ever-seen)
		 (set! result (append (if (null? tests)(list waitontest-name) tests) result)))))
	 waitons)
	(delete-duplicates result))))

(define (db:teststep-set-status! db test-id teststep-name state-in status-in comment logfile #!key (work-area #f))
  (debug:print 4 "test-id: " test-id " teststep-name: " teststep-name)
  ;;                 db:open-test-db-by-test-id does cdb:remote-run
  (let* ((tdb       (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (state     (items:check-valid-items "state" state-in))
	 (status    (items:check-valid-items "status" status-in)))
    (if (or (not state)(not status))
	(debug:print 3 "WARNING: Invalid " (if status "status" "state")
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
    (if tdb
	(begin

;;  PURPOSE.

(require-extension (srfi 18) extras tcp s11n)

(use sqlite3 srfi-1 posix regex regex-case srfi-69 hostinfo md5 message-digest)
(import (prefix sqlite3 sqlite3:))

(use spiffy uri-common intarweb http-client spiffy-request-vars  uri-common intarweb)

;; Configurations for server
(tcp-buffer-size 2048)
(max-connections 2048) 

(declare (unit http-transport))

(declare (uses common))
(declare (uses db))
(declare (uses tests))
(declare (uses tasks)) ;; tasks are where stuff is maintained about what is running.
(declare (uses server))
(declare (uses daemon))

(include "common_records.scm")
(include "db_records.scm")

(define (http-transport:make-server-url hostport)
  (if (not hostport)
      #f
      (conc "http://" (car hostport) ":" (cadr hostport))))

(define *server-loop-heart-beat* (current-seconds))
(define *heartbeat-mutex* (make-mutex))

;;======================================================================
;; S E R V E R
;;======================================================================

;; Call this to start the actual server

	 (print "ERROR: Tried and tried but could not start the server")))
   ;; any error in following steps will result in a retry
   (set! *runremote* (list ipaddrstr portnum))
   ;; (open-run-close tasks:remove-server-records tasks:open-db)
   (open-run-close tasks:server-register 
		   tasks:open-db 
		   (current-process-id)
		   ipaddrstr portnum 0 'startup 'http)
   (debug:print 1 "INFO: Trying to start server on " ipaddrstr ":" portnum)
   ;; This starts the spiffy server
   ;; NEED WAY TO SET IP TO #f TO BIND ALL
   (start-server bind-address: ipaddrstr port: portnum)
   (open-run-close tasks:server-delete tasks:open-db ipaddrstr portnum)
   (debug:print 1 "INFO: server has been stopped")))

;;======================================================================
;; S E R V E R   U T I L I T I E S 
;;======================================================================

;;======================================================================
;; C L I E N T S
;;======================================================================

(define *http-mutex* (make-mutex))

;; (system "megatest -list-servers | grep alive || megatest -server - -daemonize && sleep 4")

;; <html>
;; <head></head>
;; <body>1 Hello, world! Goodbye Dolly</body></html>
;; Send msg to serverdat and receive result
(define (http-transport:client-send-receive serverdat msg #!key (numretries 30))
  (let* (;; (url        (http-transport:make-server-url serverdat))
	 (fullurl    (caddr serverdat)) ;; (conc url "/ctrl")) ;; (conc url "/?dat=" msg)))
	 (res        #f))
    (handle-exceptions
     exn
     (begin
       (print "ERROR IN http-transport:client-send-receive " ((condition-property-accessor 'exn 'message) exn))
       (thread-sleep! 2)
       (if (> numretries 0)
	   (http-transport:client-send-receive serverdat msg numretries: (- numretries 1))))
     (begin
       (debug:print-info 11 "fullurl=" fullurl "\n")
       ;; set up the http-client here
       (max-retry-attempts 5)
       ;; consider all requests indempotent
       (retry-request? (lambda (request)
			 #t))   ;;  		 (thread-sleep! (/ (if (> numretries 100) 100 numretries) 10))
       ;; (set! numretries (- numretries 1))
       ;;  		 #t))
       ;; send the data and get the response
       ;; extract the needed info from the http data and 
       ;; process and return it.
       (let* ((send-recieve (lambda ()
			      (mutex-lock! *http-mutex*)
			      (set! res (with-input-from-request 
					 fullurl 

					 (list (cons 'dat msg)) 
					 read-string))
			      (close-all-connections!) 
			      (mutex-unlock! *http-mutex*)))
	      (time-out     (lambda ()
			      (thread-sleep! 5)
			      (if (not res)
				  (begin
				    (debug:print 0 "WARNING: communication with the server timed out.")
				    (mutex-unlock! *http-mutex*)
				    (http-transport:client-send-receive serverdat msg numretries: (- numretries 1))
				    (if (< numretries 3) ;; on last try just exit
					(begin
					  (debug:print 0 "ERROR: communication with the server timed out. Giving up.")
					  (exit 1)))))))
	      (th1 (make-thread send-recieve "with-input-from-request"))
	      (th2 (make-thread time-out     "time out")))
	 (thread-start! th1)
	 (thread-start! th2)
	 (thread-join! th1)
	 (thread-terminate! th2)
	 (debug:print-info 11 "got res=" res)
	 (let ((match (string-search (regexp "<body>(.*)<.body>") res)))
	   (debug:print-info 11 "match=" match)
	   (let ((final (cadr match)))
	     (debug:print-info 11 "final=" final)
	     final)))))))

(define (http-transport:client-connect iface port)
  (let* ((login-res   #f)
	 (uri-dat     (make-request method: 'POST uri: (uri-reference (conc "http://" iface ":" port "/ctrl"))))
	 (serverdat   (list iface port uri-dat)))
    (set! login-res (client:login serverdat))
    (if (and (not (null? login-res))
	     (car login-res))
	(begin
	  (debug:print-info 2 "Logged in and connected to " iface ":" port)
	  (set! *runremote* serverdat)
	  serverdat)
	(begin
	  (debug:print-info 0 "ERROR: Failed to login or connect to " iface ":" port)
	  (exit 1)))))
;; 	  (set! *runremote* #f)
;; 	  (set! *transport-type* 'fs)
;; 	  #f))))


;; run http-transport:keep-running in a parallel thread to monitor that the db is being 
;; used and to shutdown after sometime if it is not.
;;
(define (http-transport:keep-running)
  ;; if none running or if > 20 seconds since 
  ;; server last used then start shutdown
  ;; This thread waits for the server to come alive
  (let* ((server-info (let loop ()
                        (let ((sdat #f))
                          (mutex-lock! *heartbeat-mutex*)
                          (set! sdat *runremote*)
                          (mutex-unlock! *heartbeat-mutex*)
                          (if sdat
			      sdat
                              (begin
                                (sleep 4)
                                (loop))))))
         (iface       (car server-info))
         (port        (cadr server-info))
         (last-access 0)
	 (tdb         (tasks:open-db))

        (tasks:server-update-heartbeat tdb spid)
      
        ;; (if ;; (or (> numrunning 0) ;; stay alive for two days after last access
        (mutex-lock! *heartbeat-mutex*)
        (set! last-access *last-db-access*)
        (mutex-unlock! *heartbeat-mutex*)
	;; (debug:print 11 "last-access=" last-access ", server-timeout=" server-timeout)
        (if (and *server-run*
		 (> (+ last-access server-timeout)
		    (current-seconds)))
            (begin
              (debug:print-info 0 "Server continuing, seconds since last db access: " (- (current-seconds) last-access))
              (loop 0))
            (begin
              (debug:print-info 0 "Starting to shutdown the server.")
              ;; need to delete only *my* server entry (future use)
              (set! *time-to-exit* #t)
              (open-run-close tasks:server-deregister-self tasks:open-db (get-host-name))
              (thread-sleep! 1)

;;======================================================================
;; Copyright 2006-2012, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================




(define-inline (keys->valslots keys) ;; => ?,?,? ....
  (string-intersperse (map (lambda (x) "?") keys) ","))

(define-inline (keys->key/field keys . additional)
  (string-join (map (lambda (k)(conc k " TEXT"))

		    (append keys additional)) ","))

(define-inline (item-list->path itemdat)
  (if (list? itemdat)
      (string-intersperse  (map cadr itemdat) "/")
      ""))

(declare (unit keys))
(declare (uses common))

(include "key_records.scm")
(include "common_records.scm")









(define (keys->keystr keys) ;; => key1,key2,key3,additiona1, ...
  (string-intersperse keys ","))

(define (args:usage . a) #f)





;;======================================================================
;; key <=> target routines
;;======================================================================

;; This invalidates using "/" in item names. Every key will be
;; available via args:get-arg as :keyfield. Since this only needs to
;; be called once let's use it to set the environment vars
;;
;; The setting of :keyfield in args should be turned off ASAP
;;
(define (keys:target-set-args keys target ht)
  (let ((vals (string-split target "/")))
    (if (eq? (length vals)(length keys))
	(for-each (lambda (key val)
		    (setenv key val)
		    (hash-table-set! ht (conc ":" key) val))
		  keys
		  vals)
	(debug:print 0 "ERROR: wrong number of values in " target ", should match " keys))
    vals))

;; given the keys (a list of vectors <key field> or a list of keys) and a target return a keyval list
;; keyval list ( (key1 val1) (key2 val2) ...)
(define (keys:target->keyval keys target)
  (let* ((targlist (string-split target "/"))
	 (numkeys  (length keys))
	 (numtarg  (length targlist))
	 (targtweaked (if (> numkeys numtarg)
			  (append targlist (make-list (- numkeys numtarg) ""))
			  targlist)))
    (map (lambda (key targ)
	   (list key targ))
	 keys targtweaked)))


;;======================================================================
;; config file related routines
;;======================================================================












































(define (keys:config-get-fields confdat)
  (let ((fields (hash-table-ref/default confdat "fields" '())))

    (map car fields)))

	'())))

(define (launch:execute encoded-cmd)
  (let* ((cmdinfo   (read (open-input-string (base64:base64-decode encoded-cmd)))))
    (setenv "MT_CMDINFO" encoded-cmd)
    (if (list? cmdinfo) ;; ((testpath /tmp/mrwellan/jazzmind/src/example_run/tests/sqlitespeed)
	;; (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
	(let* ((testpath  (assoc/default 'testpath  cmdinfo))  ;; testpath is the test spec area
	       (top-path  (assoc/default 'toppath   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))  ;; work-area is the test run area
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (ezsteps   (assoc/default 'ezsteps   cmdinfo))
	       ;; (runremote (assoc/default 'runremote cmdinfo))
	       (transport (assoc/default 'transport cmdinfo))
	       (serverinf (assoc/default 'serverinf cmdinfo))
	       (port      (assoc/default 'port      cmdinfo))

	  (change-directory top-path)
	  (debug:print 2 "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  ;; Setup the *runremote* global var
	  (if *runremote* (debug:print 2 "ERROR: I'm not expecting *runremote* to be set at this time"))
	  ;; (set! *runremote* runremote)
	  (set! *transport-type* (string->symbol transport))
	  (set! keys       (cdb:remote-run db:get-keys #f))
	  (set! keyvals    (keys:target->keyval keys target))
	  ;; apply pre-overrides before other variables. The pre-override vars must not
	  ;; clobbers things from the official sources such as megatest.config and runconfigs.config
	  (if (string? set-vars)
	      (let ((varpairs (string-split set-vars ",")))
		(debug:print 4 "varpairs: " varpairs)
		(map (lambda (varpair)
		       (let ((varval (string-split varpair "=")))

	  ;; Can setup as client for server mode now
	  ;; (client:setup)

	  (change-directory *toppath*) 
	  (set-megatest-env-vars run-id) ;; these may be needed by the launching process
	  (change-directory work-area) 

	  (set-run-config-vars run-id keyvals target) ;; (db:get-target db run-id))
	  ;; environment overrides are done *before* the remaining critical envars.
	  (alist->env-vars env-ovrd)
	  (set-megatest-env-vars run-id)
	  (set-item-env-vars itemdat)
	  (save-environment-as-files "megatest")
	  ;; open-run-close not needed for test-set-meta-info
	  (tests:set-meta-info #f test-id run-id test-name itemdat 0 work-area)
	  (tests:test-set-status! test-id "REMOTEHOSTSTART" "n/a" (args:get-arg "-m") #f)
	  (if (args:get-arg "-xterm")
	      (set! fullrunscript "xterm")
	      (if (and fullrunscript (not (file-execute-access? fullrunscript)))
		  (system (conc "chmod ug+x " fullrunscript))))
	  ;; We are about to actually kick off the test
	  ;; so this is a good place to remove the records for 

						   ;;       (set! script (conc script "source " prev-env))))
						   
						   ;; call the command using mt_ezstep
						   (set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "-") " " stepcmd))

						   (debug:print 4 "script: " script)
						   ;; DO NOT remote
						   (db:teststep-set-status! #f test-id stepname "start" "-" #f #f work-area: work-area)
						   ;; now launch
						   (let ((pid (process-run script)))
						     (let processloop ((i 0))
						       (let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
								   (mutex-lock! m)
								   (vector-set! exit-info 0 pid)
								   (vector-set! exit-info 1 exit-status)
								   (vector-set! exit-info 2 exit-code)
								   (mutex-unlock! m)
								   (if (eq? pid-val 0)
								       (begin
									 (thread-sleep! 2)
									 (processloop (+ i 1))))
								   ))
                                                     (let ((exinfo (vector-ref exit-info 2))
                                                           (logfna (if logpro-used (conc stepname ".html") "")))
						       ;; testing if procedures called in a remote call cause problems (ans: no or so I suspect)
						       (db:teststep-set-status! #f test-id stepname "end" exinfo #f logfna work-area: work-area))
						     (if logpro-used
							 (cdb:test-set-log! *runremote*  test-id (conc stepname ".html")))
						     ;; set the test final status
						     (let* ((this-step-status (cond
									       ((and (eq? (vector-ref exit-info 2) 2) logpro-used) 'warn)
									       ((eq? (vector-ref exit-info 2) 0)                   'pass)
									       (else 'fail)))

							    (current-seconds) 
							    start-seconds)))))
					(kill-tries 0))
				   (let loop ((minutes   (calc-minutes)))
				     (begin
				       (set! kill-job? (test-get-kill-request test-id)) ;; run-id test-name itemdat))
				       ;; open-run-close not needed for test-set-meta-info
				       (tests:set-meta-info #f test-id run-id test-name itemdat minutes work-area)
				       (if kill-job? 
					   (begin
					     (mutex-lock! m)
					     (let* ((pid (vector-ref exit-info 0)))
					       (if (number? pid)
						   (begin
						     (debug:print 0 "WARNING: Request received to kill job (attempt # " kill-tries ")")

				     ((eq? rollup-status 2)
				      ;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
				      (if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
				     (else "FAIL"))
				    (args:get-arg "-m") #f)))
	      ;; for automated creation of the rollup html file this is a good place...
	      (if (not (equal? item-path ""))
		  (tests:summarize-items #f run-id test-name #f)) ;; don't force - just update if no
	      )
	    (mutex-unlock! m)
	    ;; (exec-results (cmd-run->list fullrunscript)) ;;  (list ">" (conc test-name "-run.log"))))
	    ;; (success      exec-results)) ;; (eq? (cadr exec-results) 0)))
	    (debug:print 2 "Output from running " fullrunscript ", pid " (vector-ref exit-info 0) " in work area " 
			 work-area ":\n====\n exit code " (vector-ref exit-info 2) "\n" "====\n")
	    ;; (sqlite3:finalize! db)

;; 
;;  <linkdir> - <target> - <testname> [ - <itempath> ]
;; 
;; All log file links should be stored relative to the top of link path
;;  
;; <target> - <testname> [ - <itempath> ] 
;;
(define (create-work-area run-id run-info keyvals test-id test-src-path disk-path testname itemdat)

  (let* ((item-path (item-list->path itemdat))
	 (runname  (db:get-value-by-header (db:get-row run-info)
					   (db:get-header run-info)
					   "runname"))
	 ;; convert back to db: from rdb: - this is always run at server end

	 (target   (string-intersperse (map cadr keyvals) "/"))

	 (not-iterated  (equal? "" item-path))

	 ;; all tests are found at <rundir>/test-base or <linkdir>/test-base
	 (testtop-base (conc target "/" runname "/" testname))
	 (test-base    (conc testtop-base (if not-iterated "" "/") item-path))

    ;;   (system  (conc "ln -sf " test-path " " testlink)))
    (if (directory? test-path)
	(begin
	  (let* ((ovrcmd (let ((cmd (config-lookup *configdat* "setup" "testcopycmd")))
			   (if cmd
			       ;; substitute the TEST_SRC_PATH and TEST_TARG_PATH
			       (string-substitute "TEST_TARG_PATH" test-path
						  (string-substitute "TEST_SRC_PATH" test-src-path cmd #t) #t)
			       #f)))
		 (cmd    (if ovrcmd 
			     ovrcmd
			     (conc "rsync -av" (if (debug:debug-mode 1) "" "q") " " test-src-path "/ " test-path "/"
				   " >> " test-path "/mt_launch.log 2>> " test-path "/mt_launch.log")))
		 (status (system cmd)))
	    (if (not (eq? status 0))
		(debug:print 2 "ERROR: problem with running \"" cmd "\"")))
	  (list lnkpathf lnkpath ))
	(list #f #f))))

;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch
;;      (launch-test db (cadr status) test-conf))
(define (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat params)
  (change-directory *toppath*)
  (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
   (list ;; (list "MT_TEST_RUN_DIR" work-area)
    (list "MT_RUN_AREA_HOME" *toppath*)
    (list "MT_TEST_NAME" test-name)
    ;; (list "MT_ITEM_INFO" (conc itemdat)) 
    (list "MT_RUNNAME"   runname)

	 (work-area  #f)
	 (toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all
	 (diskpath   #f)
	 (cmdparms   #f)
	 (fullcmd    #f) ;; (define a (with-output-to-string (lambda ()(write x))))
	 (mt-bindir-path #f)
	 (item-path (item-list->path itemdat))
	 ;; (test-id    (cdb:remote-run db:get-test-id #f run-id test-name item-path))
	 (testinfo   (cdb:get-test-info-by-id *runremote* test-id))
	 (mt_target  (string-intersperse (map cadr keyvals) "/"))
	 (debug-param (append (if (args:get-arg "-debug")  (list "-debug" (args:get-arg "-debug")) '())
			      (if (args:get-arg "-logging")(list "-logging") '()))))
    (if hosts (set! hosts (string-split hosts)))
    ;; set the megatest to be called on the remote host
    (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
    (set! mt-bindir-path (pathname-directory remote-megatest))
    (if launcher (set! launcher (string-split launcher)))
    ;; set up the run work area for this test
    (set! diskpath (get-best-disk *configdat*))
    (if diskpath
	(let ((dat  (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
	  (set! work-area (car dat))
	  (set! toptest-work-area (cadr dat))
	  (debug:print-info 2 "Using work area " work-area))
	(begin
	  (set! work-area (conc test-path "/tmp_run"))
	  (create-directory work-area #t)
	  (debug:print 0 "WARNING: No disk work area specified - running in the test directory under tmp_run")))

				     (list 'itemdat   itemdat  )
				     (list 'megatest  remote-megatest)
				     (list 'ezsteps   ezsteps) 
				     (list 'target    mt_target)
				     (list 'env-ovrd  (hash-table-ref/default *configdat* "env-override" '())) 
				     (list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
				     (list 'runname   runname)
				     (list 'mt-bindir-path mt-bindir-path)))))))
    ;; clean out step records from previous run if they exist
    ;; (debug:print-info 4 "FIXMEEEEE!!!! This can be removed some day, perhaps move all test records to the test db?")
    ;; (open-run-close db:delete-test-step-records db test-id)
    (change-directory work-area) ;; so that log files from the launch process don't clutter the test dir
    (tests:test-set-status! test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
    (cond
     ((and launcher hosts) ;; must be using ssh hostname

			    (append (list (list "MT_TEST_RUN_DIR" work-area)
					  (list "MT_TEST_NAME" test-name)
					  (list "MT_ITEM_INFO" (conc itemdat)) 
					  (list "MT_RUNNAME"   runname)
					  (list "MT_TARGET"    mt_target)
					  )
				    itemdat)))
	   (launch-results (apply (if (equal? (configf:lookup *configdat* "setup" "launchwait") "yes")
				      cmd-run-with-stderr->list
				      process-run)
				  (if useshell
				      (string-intersperse fullcmd " ")
				      (car fullcmd))

				  (if useshell
				      '()
				      (cdr fullcmd)))))
      (if (list? launch-results)
	  (with-output-to-file "mt_launch.log"
	    (lambda ()
	      (apply print launch-results))
	    #:append))
      (debug:print 2 "Launching completed, updating db")
      (debug:print 2 "Launch results: " launch-results)
      (if (not launch-results)
          (begin
            (print "ERROR: Failed to run " (string-intersperse fullcmd " ") ", exiting now")
            ;; (sqlite3:finalize! db)
            ;; good ole "exit" seems not to work
            ;; (_exit 9)
            ;; but this hack will work! Thanks go to Alan Post of the Chicken email list
            ;; NB// Is this still needed? Should be safe to go back to "exit" now?
            (process-signal (current-process-id) signal/kill)
            ))
      (alist->env-vars miscprevvals)
      (alist->env-vars testprevvals)
      (alist->env-vars commonprevvals)
      launch-results))
  (change-directory *toppath*))

;; Always use two digit decimal
;; 1.01, 1.02...1.10,1.11 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.5427)

;; Copyright 2006-2012, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.

;; (include "common.scm")
;; (include "megatest-version.scm")

(use sqlite3 srfi-1 posix regex regex-case srfi-69 base64 format readline apropos json http-client) ;; (srfi 18) extras)
(import (prefix sqlite3 sqlite3:))
(import (prefix base64 base64:))

;; (use zmq)

(declare (uses common))
(declare (uses megatest-version))
(declare (uses margs))
(declare (uses runs))
(declare (uses launch))
(declare (uses server))
(declare (uses client))
(declare (uses tests))
(declare (uses genexample))
(declare (uses daemon))
(declare (uses db))

(define *db* #f) ;; this is only for the repl, do not use in general!!!!

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")
(include "megatest-fossil-hash.scm")


(let ((debugcontrolf (conc (get-environment-variable "HOME") "/.megatestrc")))





  (if (file-exists? debugcontrolf)




      (load debugcontrolf)))










(define help (conc "
Megatest, documentation at http://www.kiatoa.com/fossils/megatest
  version " megatest-version "
  license GPL, Copyright Matt Welland 2006-2012

Usage: megatest [options]

                            patterns.
  -list-disks             : list the disks available for storing runs
  -list-targets           : list the targets in runconfigs.config
  -list-db-targets        : list the target combinations used in the db
  -show-config            : dump the internal representation of the megatest.config file
  -show-runconfig         : dump the internal representation of the runconfigs.config file
  -dumpmode json          : dump in json format instead of sexpr
  -show-cmdinfo           : dump the command info for a test (run in test environment)

Misc 
  -rebuild-db             : bring the database schema up to date
  -update-meta            : update the tests metadata for all tests
  -env2file fname         : write the environment to fname.csh and fname.sh
  -setvars VAR1=val1,VAR2=val2 : Add environment variables to a run NB// these are
                                 overwritten by values set in config files.

			"-list-servers"
			;; mist queries
			"-list-disks"
			"-list-targets"
			"-list-db-targets"
			"-show-runconfig"
			"-show-config"
			"-show-cmdinfo"
			;; queries
			"-test-paths" ;; get path(s) to a test, ordered by youngest first

			"-runall"    ;; run all tests
			"-remove-runs"
			"-rebuild-db"
			"-rollup"

(if (args:get-arg "-version")
    (begin
      (print megatest-version)
      (exit)))

(define *didsomething* #f)

(if (and (or (args:get-arg "-list-targets")
	     (args:get-arg "-list-db-targets"))
	 (not (args:get-arg "-transport")))
    (hash-table-set! args:arg-hash "-transport" "fs"))

;;======================================================================
;; Misc setup stuff
;;======================================================================

(debug:setup)

(if (args:get-arg "-logging")(set! *logging* #t))

		       "-update-meta" "-extract-ods"))))
	(if (setup-for-run)
	    (let loop ((servers  (open-run-close tasks:get-best-server tasks:open-db))
		       (trycount 0))
	      (if (or (not servers)
		      (null? servers))
		  (begin
		    (if (even? trycount) ;; just do the server start every other time through this loop (every 8 seconds)
			(begin
			  (debug:print 0 "INFO: Starting server as none running ...")
			  ;; (server:launch (string->symbol (args:get-arg "-transport" "http"))))
			  ;; no need to use fork, no need to do the list-servers trick. Just start the damn server, it will exit on it's own
			  ;; if there is an existing server
			  (system "megatest -server - -daemonize")
			  (thread-sleep! 3)
			  ;; (process-run (car (argv)) (list "-server" "-" "-daemonize" "-transport" (args:get-arg "-transport" "http")))
			  ;; (system (conc "megatest -list-servers | egrep '" megatest-version ".*alive' || megatest -server - -daemonize && sleep 3"))
			  ;; (process-fork (lambda ()
			  ;;       	  (daemon:ize)
			  ;;       	  (server:launch (string->symbol (args:get-arg "-transport" "http")))))

			  )
			(begin
			  (debug:print-info 0 "Waiting for server to start")
			  (thread-sleep! 4)))
		    (if (< trycount 10)
			(loop (open-run-close tasks:get-best-server tasks:open-db) 
			      (+ trycount 1))
			(debug:print 0 "WARNING: Couldn't start or find a server.")))
		  (debug:print 0 "INFO: Server(s) running " servers)
		  )))))

(if (or (args:get-arg "-list-servers")
	(args:get-arg "-stop-server"))
    (let ((tl (setup-for-run)))
      (if tl 

    (let ((targets (common:get-runconfig-targets)))
      (print "Found "(length targets) " targets")
      (for-each (lambda (x)
		  ;; (print "[" x "]"))
		  (print x))
		targets)
      (set! *didsomething* #t)))

(define (full-runconfigs-read)
  (let* ((keys   (cdb:remote-run get-keys #f))
	 (target (if (args:get-arg "-reqtarg")
		     (args:get-arg "-reqtarg")
		     (if (args:get-arg "-target")
			 (args:get-arg "-target")
			 #f)))
	 (key-vals (if target (keys:target->keyval keys target) #f))
	 (sections (if target (list "default" target) #f))
	 (data     (begin
		     (setenv "MT_RUN_AREA_HOME" *toppath*)
		     (if key-vals
			 (for-each (lambda (kt)
				     (setenv (car kt) (cadr kt)))
				   key-vals))
		     (read-config "runconfigs.config" #f #t sections: sections))))
    data))


(if (args:get-arg "-show-runconfig")
    (let ((data (full-runconfigs-read)))
      ;; keep this one local
      (cond
       ((not (args:get-arg "-dumpmode"))
	(pp (hash-table->alist data)))
       ((string=? (args:get-arg "-dumpmode") "json")
	(json-write data))
       (else

       ((not (args:get-arg "-dumpmode"))
	(pp (hash-table->alist data)))
       ((string=? (args:get-arg "-dumpmode") "json")
	(json-write data))
       (else
	(debug:print 0 "ERROR: -dumpmode of " (args:get-arg "-dumpmode") " not recognised")))
      (set! *didsomething* #t)))

(if (args:get-arg "-show-cmdinfo")
    (let ((data (read (open-input-string (base64:base64-decode (getenv "MT_CMDINFO"))))))
      (if (equal? (args:get-arg "-dumpmode") "json")
	  (json-write data)
	  (pp data))
      (set! *didsomething* #t)))

;;======================================================================
;; Remove old run(s)
;;======================================================================

;; since several actions can be specified on the command line the removal
;; is done first
(define (operate-on action)
  (let* ((runrec (runs:runrec-make-record))
	 (target (or (args:get-arg "-reqtarg")
		     (args:get-arg "-target"))))
    (cond
     ((not target)
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify -target or -reqtarg")
      (exit 1))
     ((not (args:get-arg ":runname"))
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify the run name pattern with :runname patt")
      (exit 2))
     ((not (args:get-arg "-testpatt"))
      (debug:print 0 "ERROR: Missing required parameter for " action ", you must specify the test pattern with -testpatt")
      (exit 3))
     (else
      (if (not (car *configinfo*))
	  (begin
	    (debug:print 0 "ERROR: Attempted " action "on test(s) but run area config file not found")
	    (exit 1))
	  ;; put test parameters into convenient variables
	  (runs:operate-on  action
			    target
			    (args:get-arg ":runname")
			    (args:get-arg "-testpatt")
			    state: (args:get-arg ":state") 
			    status: (args:get-arg ":status")
			    new-state-status: (args:get-arg "-set-state-status")))
      (set! *didsomething* #t)))))
	  
(if (args:get-arg "-remove-runs")
    (general-run-call 
     "-remove-runs"
     "remove runs"
     (lambda (target runname keys keyvals)
       (operate-on 'remove-runs))))

(if (args:get-arg "-set-state-status")
    (general-run-call 
     "-set-state-status"
     "set state and status"
     (lambda (target runname keys keyvals)
       (operate-on 'set-state-status))))

;;======================================================================
;; Query runs
;;======================================================================

(if (or (args:get-arg "-list-runs")
	(args:get-arg "-list-db-targets"))
    (if (setup-for-run)
	(let* ((db       #f)
	       (runpatt  (args:get-arg "-list-runs"))
	       (testpatt (if (args:get-arg "-testpatt") 
			     (args:get-arg "-testpatt") 
			     "%"))
	       (runsdat  (cdb:remote-run db:get-runs #f runpatt #f #f '()))
	       (runs     (db:get-rows runsdat))
	       (header   (db:get-header runsdat))
	       (keys     (cdb:remote-run db:get-keys #f))

	       (db-targets (args:get-arg "-list-db-targets"))
	       (seen     (make-hash-table)))
	  ;; Each run
	  (for-each 
	   (lambda (run)
	     (let ((targetstr (string-intersperse (map (lambda (x)
							 (db:get-value-by-header run header x))
						       keys) "/")))
	       (if db-targets
		   (if (not (hash-table-ref/default seen targetstr #f))
		       (begin
			 (hash-table-set! seen targetstr #t)
			 ;; (print "[" targetstr "]"))))
			 (print targetstr))))
	       (if (not db-targets)

;;   process deferred tasks per above steps

;; run all tests are are Not COMPLETED and PASS or CHECK
(if (args:get-arg "-runall")
    (general-run-call 
     "-runall"
     "run all tests"
     (lambda (target runname keys keyvals)
       (runs:run-tests target
		       runname

		       (args:get-arg "-testpatt")
		       user
		       args:arg-hash))))

;;======================================================================
;; run one test
;;======================================================================

;;    - if test run time > allowed run time then kill job
;;    - if cannot access db > allowed disconnect time then kill job

(if (args:get-arg "-runtests")
  (general-run-call 
   "-runtests" 
   "run a test" 
   (lambda (target runname keys keyvals)
     (runs:run-tests target
		     runname
		     (args:get-arg "-runtests")

		     user
		     args:arg-hash))))

;;======================================================================
;; Rollup into a run
;;======================================================================

(if (args:get-arg "-rollup")



    (general-run-call 
     "-rollup" 
     "rollup tests" 
     (lambda (target runname keys keyvals)
       (runs:rollup-run keys
			keyvals
			(args:get-arg ":runname") 
			user))))

;;======================================================================
;; Lock or unlock a run
;;======================================================================

(if (or (args:get-arg "-lock")(args:get-arg "-unlock"))
    (general-run-call 
     (if (args:get-arg "-lock") "-lock" "-unlock")
     "lock/unlock tests" 
     (lambda (target runname keys keyvals)
       (runs:handle-locking 
		  target
		  keys
		  (args:get-arg ":runname") 
		  (args:get-arg "-lock")
		  (args:get-arg "-unlock")
		  user))))

		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -test-paths or -test-files, exiting")
		(exit 1)))
	  (let* ((keys     (cdb:remote-run db:get-keys db))

		 ;; db:test-get-paths must not be run remote
		 (paths    (db:test-get-paths-matching db keys target (args:get-arg "-test-files"))))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(print path))
		      paths)))
	;; else do a general-run-call
	(general-run-call 
	 "-test-files"
	 "Get paths to test"
	 (lambda (target runname keys keyvals)
	   (let* ((db       #f)
		  ;; DO NOT run remote
		  (paths    (db:test-get-paths-matching db keys target (args:get-arg "-test-files"))))
	     (for-each (lambda (path)
			 (print path))
		       paths))))))

;;======================================================================
;; Archive tests
;;======================================================================

		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -archive, exiting")
		(exit 1)))
	  (let* ((keys     (cdb:remote-run db:get-keys db))

		 ;; DO NOT run remote
		 (paths    (db:test-get-paths-matching db keys target)))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(print path))
		      paths)))
	;; else do a general-run-call
	(general-run-call 
	 "-test-paths"
	 "Get paths to tests"
	 (lambda (target runname keys keyvals)
	   (let* ((db       #f)
		  ;; DO NOT run remote
		  (paths    (db:test-get-paths-matching db keys target)))
	     (for-each (lambda (path)
			 (print path))
		       paths))))))

;;======================================================================
;; Extract a spreadsheet from the runs database
;;======================================================================

(if (args:get-arg "-extract-ods")
    (general-run-call
     "-extract-ods"
     "Make ods spreadsheet"
     (lambda (target runname keys keyvals)
       (let ((db         #f)
	     (outputfile (args:get-arg "-extract-ods"))
	     (runspatt   (args:get-arg ":runname"))
	     (pathmod    (args:get-arg "-pathmod")))
	     ;; (keyvalalist (keys->alist keys "%")))
	 (debug:print 2 "Extract ods, outputfile: " outputfile " runspatt: " runspatt " keyvalalist: " keyvals)
	 (cdb:remote-run db:extract-ods-file db outputfile keyvalalist (if runspatt runspatt "%") pathmod)))))

;;======================================================================
;; execute the test
;;    - gets called on remote host
;;    - receives info from the -execute param
;;    - passes info to steps via MT_CMDINFO env var (future is to use a dot file)

	     (testpath  (assoc/default 'testpath  cmdinfo))
	     (test-name (assoc/default 'test-name cmdinfo))
	     (runscript (assoc/default 'runscript cmdinfo))
	     (db-host   (assoc/default 'db-host   cmdinfo))
	     (run-id    (assoc/default 'run-id    cmdinfo))
	     (test-id   (assoc/default 'test-id   cmdinfo))
	     (itemdat   (assoc/default 'itemdat   cmdinfo))
	     (work-area (assoc/default 'work-area cmdinfo))
	     (db        #f))
	(change-directory testpath)
	;; (set! *runremote* runremote)
	(set! *transport-type* (string->symbol transport))
	(if (not (setup-for-run))
	    (begin
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(if (and state status)
	    ;; DO NOT remote run, makes calls to the testdat.db test db.
	    (db:teststep-set-status! db test-id step state status msg logfile work-area: work-area)
	    (begin
	      (debug:print 0 "ERROR: You must specify :state and :status with every call to -step")
	      (exit 6))))))

(if (args:get-arg "-step")
    (begin
      (megatest:step 
       (args:get-arg "-step")
       (args:get-arg ":state")
       (args:get-arg ":status")
       (args:get-arg "-setlog")
       (args:get-arg "-m"))
      ;; (if db (sqlite3:finalize! db))
      (set! *didsomething* #t)))
    
(if (or (args:get-arg "-setlog")       ;; since setting up is so costly lets piggyback on -test-status
	;;     (not (args:get-arg "-step")))  ;; -setlog may have been processed already in the "-step" previous
	;;     NEW POLICY - -setlog sets test overall log on every call.
	(args:get-arg "-set-toplog")
	(args:get-arg "-test-status")
	(args:get-arg "-set-values")
	(args:get-arg "-load-test-data")
	(args:get-arg "-runstep")
	(args:get-arg "-summarize-items"))
    (if (not (getenv "MT_CMDINFO"))

	       (testpath  (assoc/default 'testpath  cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))
	       (db        #f) ;; (open-db))
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status")))
	  (change-directory testpath)
	  ;; (set! *runremote* runremote)
	  (set! *transport-type* (string->symbol transport))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, exiting")
		(exit 1)))

	  ;; can setup as client for server mode now
	  ;; (client:setup)

	  (if (args:get-arg "-load-test-data")
	      ;; has sub commands that are rdb:
	      ;; DO NOT put this one into either cdb:remote-run or open-run-close
	      (db:load-test-data db test-id work-area: work-area))
	  (if (args:get-arg "-setlog")
	      (let ((logfname (args:get-arg "-setlog")))
		(cdb:test-set-log! *runremote* test-id logfname)))
	  (if (args:get-arg "-set-toplog")
	      ;; DO NOT run remote
	      (tests:test-set-toplog! db run-id test-name (args:get-arg "-set-toplog")))
	  (if (args:get-arg "-summarize-items")

				       ((zsh bash sh ash) "2>&1 >")
				       (else ">&")))
			 (fullcmd    (conc "(" (string-intersperse 
						(cons cmd params) " ")
					   ") " redir " " logfile)))
		    ;; mark the start of the test
		    ;; DO NOT run remote
		    (db:teststep-set-status! db test-id stepname "start" "n/a" (args:get-arg "-m") logfile work-area: work-area)
		    ;; run the test step
		    (debug:print-info 2 "Running \"" fullcmd "\"")
		    (change-directory startingdir)
		    (set! exitstat (system fullcmd)) ;; cmd params))
		    (set! *globalexitstatus* exitstat)
		    (change-directory testpath)
		    ;; run logpro if applicable ;; (process-run "ls" (list "/foo" "2>&1" "blah.log"))
		    (if logprofile
			(let* ((htmllogfile (conc stepname ".html"))
			       (oldexitstat exitstat)
			       (cmd         (string-intersperse (list "logpro" logprofile htmllogfile "<" logfile ">" (conc stepname "_logpro.log")) " ")))
			  (debug:print-info 2 "running \"" cmd "\"")
			  (change-directory startingdir)
			  (set! exitstat (system cmd))
			  (set! *globalexitstatus* exitstat) ;; no necessary
			  (change-directory testpath)
			  (cdb:test-set-log! *runremote* test-id htmllogfile)))
		    (let ((msg (args:get-arg "-m")))
		      ;; DO NOT run remote
		      (db:teststep-set-status! db test-id stepname "end" exitstat msg logfile work-area: work-area))
		    )))
	  (if (or (args:get-arg "-test-status")
		  (args:get-arg "-set-values"))
	      (let ((newstatus (cond
				((number? status)       (if (equal? status 0) "PASS" "FAIL"))
				((and (string? status)
				      (string->number status))(if (equal? (string->number status) 0) "PASS" "FAIL"))

		    (begin
		      (debug:print 0 "ERROR: You must specify :state and :status with every call to -test-status\n" help)
		      ;; (sqlite3:finalize! db)
		      (exit 6)))
		(let* ((msg    (args:get-arg "-m"))
		       (numoth (length (hash-table-keys otherdata))))
		  ;; Convert to rpc inside the tests:test-set-status! call, not here
		  (tests:test-set-status! test-id state newstatus msg otherdata work-area: work-area))))
	  (if db (sqlite3:finalize! db))
	  (set! *didsomething* #t))))

;;======================================================================
;; Various helper commands can go below here
;;======================================================================

(if (args:get-arg "-showkeys")
    (let ((db #f)
	  (keys #f))
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "Failed to setup, exiting")
	    (exit 1)))
      (set! keys (cbd:remote-run db:get-keys db))
      (debug:print 1 "Keys: " (string-intersperse keys ", "))
      (if db (sqlite3:finalize! db))
      (set! *didsomething* #t)))

(if (args:get-arg "-gui")
    (begin
      (debug:print 0 "Look at the dashboard for now")
      ;; (megatest-gui)

		(load (args:get-arg "-load"))))
	  (exit))
      (set! *didsomething* #t)))

;;======================================================================
;; Exit and clean up
;;======================================================================

(if *runremote* (close-all-connections!))

;; this is the socket if we are a client
;; (if (and *runremote*
;; 	 (socket? *runremote*))
;;     (close-socket *runremote*))

(if (not *didsomething*)

    ;; NOTE: Also build the test tree browser and look up table
    ;;
    ;; Each run is unique on its keys and runname or run-id, store in hash on colnum
    (for-each (lambda (run-id)
		(let* ((run-record (hash-table-ref/default runs-hash run-id #f))
		       (key-vals   (map (lambda (key)(db:get-value-by-header run-record header key))
					keys))
		       (run-name   (db:get-value-by-header run-record header "runname"))
		       (col-name   (conc (string-intersperse key-vals "\n") "\n" run-name))
		       (run-path   (append key-vals (list run-name))))
		  (hash-table-set! (dboard:data-get-run-keys *data*) run-id run-path)
		  (iup:attribute-set! (dboard:data-get-runs-matrix *data*)
				      (conc rownum ":" colnum) col-name)
		  (hash-table-set! runid-to-col run-id (list colnum run-record))

;; test-records is a hash table testname:item_path => vector < testname testconfig waitons priority items-info ... >
(define (runs:run-tests-queue-classic run-id runname test-records keyvals flags test-patts required-tests)
    ;; At this point the list of parent tests is expanded 
    ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", flags: " (hash-table->alist flags))
  (let ((run-info              (cdb:remote-run db:get-run-info #f run-id))
	(sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
	(test-registry         (make-hash-table))
	(registry-mutex        (make-mutex))
	(num-retries           0)
	(max-retries           (config-lookup *configdat* "setup" "maxretries"))
	(max-concurrent-jobs   (let ((mcj (config-lookup *configdat* "setup"     "max_concurrent_jobs")))
				 (if (and mcj (string->number mcj))
				     (string->number mcj)
				     1))))
    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))
    (if (not (null? sorted-test-names))
	(let loop ((hed         (car sorted-test-names))
		   (tal         (cdr sorted-test-names))
		   (reruns      '()))
	  (if (not (null? reruns))(debug:print-info 4 "reruns=" reruns))
	  ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
	  (let* ((test-record (hash-table-ref test-records hed))
		 (test-name   (tests:testqueue-get-testname test-record))
		 (tconfig     (tests:testqueue-get-testconfig test-record))
		 (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))
				(if m (string->symbol m) 'normal)))
		 (waitons     (tests:testqueue-get-waitons    test-record))
		 (priority    (tests:testqueue-get-priority   test-record))
		 (itemdat     (tests:testqueue-get-itemdat    test-record)) ;; itemdat can be a string, list or #f
		 (items       (tests:testqueue-get-items      test-record))
		 (item-path   (item-list->path itemdat))
		 (newtal      (append tal (list hed))))
	    
	    (debug:print 6
			 "test-name: " test-name
			 "\n  hed:         " hed
			 "\n  itemdat:     " itemdat
			 "\n  items:       " items
			 "\n  item-path:   " item-path
			 "\n  waitons:     " waitons
			 "\n  num-retries: " num-retries
			 "\n  tal:         " tal
			 "\n  reruns:      " reruns)

	    ;; check for hed in waitons => this would be circular, remove it and issue an
	    ;; error
	    (if (member test-name waitons)
		(begin
		  (debug:print 0 "ERROR: test " test-name " has listed itself as a waiton, please correct this!")
		  (set! waiton (filter (lambda (x)(not (equal? x hed))) waitons))))

	    (cond ;; OUTER COND
	     ((not items) ;; when false the test is ok to be handed off to launch (but not before)
	      (if (and (not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path required: required-tests))
	               (not (null? tal)))
	          (loop (car newtal)(cdr newtal) reruns))
	      (let* ((run-limits-info         (runs:can-run-more-tests test-record max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
		     (have-resources          (car run-limits-info))
		     (num-running             (list-ref run-limits-info 1))
		     (num-running-in-jobgroup (list-ref run-limits-info 2))
		     (max-concurrent-jobs     (list-ref run-limits-info 3))
		     (job-group-limit         (list-ref run-limits-info 4))
		     (prereqs-not-met         (db:get-prereqs-not-met run-id waitons item-path mode: testmode))
		     (fails                   (runs:calc-fails prereqs-not-met))
		     (non-completed           (runs:calc-not-completed prereqs-not-met)))
		(debug:print-info 8 "have-resources: " have-resources " prereqs-not-met: " 
			     (string-intersperse 
			      (map (lambda (t)
				     (if (vector? t)
					 (conc (db:test-get-state t) "/" (db:test-get-status t))
					 (conc " WARNING: t is not a vector=" t )))
				   prereqs-not-met) ", ") " fails: " fails)
		(debug:print-info 4 "hed=" hed "\n  test-record=" test-record "\n  test-name: " test-name "\n  item-path: " item-path "\n  test-patts: " test-patts)

		;; Don't know at this time if the test have been launched at some time in the past
		;; i.e. is this a re-launch?
		(debug:print-info 4 "run-limits-info = " run-limits-info)
		(cond ;; INNER COND #1 for a launchable test
		 ;; Check item path against item-patts
		 ((not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path required: required-tests)) ;; This test/itempath is not to be run
		  ;; else the run is stuck, temporarily or permanently
		  ;; but should check if it is due to lack of resources vs. prerequisites
		  (debug:print-info 1 "Skipping " (tests:testqueue-get-testname test-record) " " item-path " as it doesn't match " test-patts)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (car tal)(cdr tal) reruns)))
		 ;; Registry has been started for this test but has not yet completed
		 ;; this should be rare, the case where there are only a couple of tests and the db is slow
		 ;; delay a short while and continue
		 ;; ((eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f) 'start)
		 ;;  (thread-sleep! 0.01)
		 ;;  (loop (car newtal)(cdr newtal) reruns))
		 ;; count number of 'done, if more than 100 then skip on through.
		 (;; (and (< (length (filter (lambda (x)(eq? x 'done))(hash-table-values test-registry))) 100) ;; why get more than 200 ahead?
		  (not (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f)) ;; ) ;; too many changes required. Implement later.
		  (debug:print-info 4 "Pre-registering test " test-name "/" item-path " to create placeholder" )
		  ;; NEED TO THREADIFY THIS
		  (let ((th (make-thread (lambda ()
		        		   (mutex-lock! registry-mutex)
		        		   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'start)
		        		   (mutex-unlock! registry-mutex)
					   ;; If haven't done it before register a top level test if this is an itemized test
					   (if (not (eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f) 'done))
					       (cdb:tests-register-test *runremote* run-id test-name ""))
					   (cdb:tests-register-test *runremote* run-id test-name item-path)
		        		   (mutex-lock! registry-mutex)
					   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'done)
		        		   (mutex-unlock! registry-mutex))
		        		 (conc test-name "/" item-path))))
		    (thread-start! th))
		  ;; TRY (thread-sleep! *global-delta*)
		  (runs:shrink-can-run-more-tests-count)   ;; DELAY TWEAKER (still needed?)
		  (loop (car newtal)(cdr newtal) reruns))
		 ;; At this point *all* test registrations must be completed.
		 ((not (null? (filter (lambda (x)(eq? 'start x))(hash-table-values test-registry))))
		  (debug:print-info 0 "Waiting on test registrations: " (string-intersperse 
									 (filter (lambda (x)
										   (eq? (hash-table-ref/default test-registry x #f) 'start))
										 (hash-table-keys test-registry))
									 ", "))
		  (thread-sleep! 0.1)
		  (loop hed tal reruns))
		 ((not have-resources) ;; simply try again after waiting a second
		  (debug:print-info 1 "no resources to run new tests, waiting ...")
		  ;; Have gone back and forth on this but db starvation is an issue.
		  ;; wait one second before looking again to run jobs.
		  (thread-sleep! 1) ;; (+ 2 *global-delta*))
		  ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
		  (loop (car newtal)(cdr newtal) reruns))
		 ((and have-resources
		       (or (null? prereqs-not-met)
			   (and (eq? testmode 'toplevel)
				(null? non-completed))))
		  (run:test run-id run-info keyvals runname test-record flags #f)
		  (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'running)
		  (runs:shrink-can-run-more-tests-count)  ;; DELAY TWEAKER (still needed?)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (car tal)(cdr tal) reruns)))
		 (else ;; must be we have unmet prerequisites
		    (debug:print 4 "FAILS: " fails)
		    ;; If one or more of the prereqs-not-met are FAIL then we can issue
		    ;; a message and drop hed from the items to be processed.
		    (if (null? fails)
			(begin
			  ;; couldn't run, take a breather
			  (debug:print-info 4 "Shouldn't really get here, race condition? Unable to launch more tests at this moment, killing time ...")
			  ;; (thread-sleep! (+ 0.01 *global-delta*)) ;; long sleep here - no resources, may as well be patient
			  ;; we made new tal by sticking hed at the back of the list
			  (loop (car newtal)(cdr newtal) reruns))
			;; the waiton is FAIL so no point in trying to run hed ever again
			(if (not (null? tal))
			    (if (vector? hed)
				(begin 
				  (debug:print 1 "WARN: Dropping test " (db:test-get-testname hed) "/" (db:test-get-item-path hed)
					       " from the launch list as it has prerequistes that are FAIL")
				  (runs:shrink-can-run-more-tests-count) ;; DELAY TWEAKER (still needed?)
				  ;; (thread-sleep! *global-delta*)
				  (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'removed)
				  (loop (car tal)(cdr tal) (cons hed reruns)))
				(begin
				  (debug:print 1 "WARN: Test not processed correctly. Could be a race condition in your test implementation? " hed) ;;  " as it has prerequistes that are FAIL. (NOTE: hed is not a vector)")
				  (runs:shrink-can-run-more-tests-count) ;; DELAY TWEAKER (still needed?)
				  ;; (thread-sleep! (+ 0.01 *global-delta*))
				  (loop hed tal reruns))))))))) ;; END OF INNER COND
	     
	     ;; case where an items came in as a list been processed
	     ((and (list? items)     ;; thus we know our items are already calculated
		   (not   itemdat)) ;; and not yet expanded into the list of things to be done
	      (if (and (debug:debug-mode 1) ;; (>= *verbosity* 1)
		       (> (length items) 0)
		       (> (length (car items)) 0))
		  (pp items))
	      (for-each
	       (lambda (my-itemdat)
		 (let* ((new-test-record (let ((newrec (make-tests:testqueue)))
					   (vector-copy! test-record newrec)
					   newrec))
			(my-item-path (item-list->path my-itemdat)))
		   (if (tests:match test-patts hed my-item-path required: required-tests) ;; (patt-list-match my-item-path item-patts)           ;; yes, we want to process this item, NOTE: Should not need this check here!
		       (let ((newtestname (runs:make-full-test-name hed my-item-path)))    ;; test names are unique on testname/item-path
			 (tests:testqueue-set-items!     new-test-record #f)
			 (tests:testqueue-set-itemdat!   new-test-record my-itemdat)
			 (tests:testqueue-set-item_path! new-test-record my-item-path)
			 (hash-table-set! test-records newtestname new-test-record)
			 (set! tal (cons newtestname tal)))))) ;; since these are itemized create new test names testname/itempath
	       items)
	      (if (not (null? tal))
		  (begin
		    (debug:print-info 4 "End of items list, looping with next after short delay")
                    ;; (thread-sleep! (+ 0.01 *global-delta*))
		    (loop (car tal)(cdr tal) reruns))))

	     ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	     ;;    - but only do that if resources exist to kick off the job
	     ((or (procedure? items)(eq? items 'have-procedure))
	      (let ((can-run-more    (runs:can-run-more-tests test-record max-concurrent-jobs)))
		(if (and (list? can-run-more)
			 (car can-run-more))
		    (let* ((prereqs-not-met (db:get-prereqs-not-met run-id waitons item-path mode: testmode))
			   (fails           (runs:calc-fails prereqs-not-met))
			   (non-completed   (runs:calc-not-completed prereqs-not-met)))
		      (debug:print-info 8 "can-run-more: " can-run-more
				   "\n testname:        " hed
				   "\n prereqs-not-met: " (runs:pretty-string prereqs-not-met)
				   "\n non-completed:   " (runs:pretty-string non-completed) 
				   "\n fails:           " (runs:pretty-string fails)
				   "\n testmode:        " testmode
				   "\n num-retries:     " num-retries
				   "\n (eq? testmode 'toplevel): " (eq? testmode 'toplevel)
				   "\n (null? non-completed):    " (null? non-completed)
				   "\n reruns:          " reruns
				   "\n items:           " items
				   "\n can-run-more:    " can-run-more)
		      ;; (thread-sleep! (+ 0.01 *global-delta*))
		      (cond ;; INNER COND #2
		       ((or (null? prereqs-not-met) ;; all prereqs met, fire off the test
			    ;; or, if it is a 'toplevel test and all prereqs not met are COMPLETED then launch
			    (and (eq? testmode 'toplevel)
				 (null? non-completed)))
			(let ((test-name (tests:testqueue-get-testname test-record)))
			  (setenv "MT_TEST_NAME" test-name) ;; 
			  (setenv "MT_RUNNAME"   runname)
			  (set-megatest-env-vars run-id inrunname: runname) ;; these may be needed by the launching process
			  (let ((items-list (items:get-items-from-config tconfig)))
			    (if (list? items-list)
				(begin
				  (tests:testqueue-set-items! test-record items-list)
				  ;; (thread-sleep! *global-delta*)
				  (loop hed tal reruns))
				(begin
				  (debug:print 0 "ERROR: The proc from reading the setup did not yield a list - please report this")
				  (exit 1))))))
		       ((null? fails)
			(debug:print-info 4 "fails is null, moving on in the queue but keeping " hed " for now")
			;; only increment num-retries when there are no tests runing
			(if (eq? 0 (list-ref can-run-more 1))
			    (begin
			      ;; TRY (if (> num-retries 100) ;; first 100 retries are low time cost
			      ;; TRY     (thread-sleep! (+ 2 *global-delta*))
			      ;; TRY     (thread-sleep! (+ 0.01 *global-delta*)))
			      (set! num-retries (+ num-retries 1))))
			(if (> num-retries  max-retries)
			    (if (not (null? tal))
				(loop (car tal)(cdr tal) reruns))
			    (loop (car newtal)(cdr newtal) reruns))) ;; an issue with prereqs not yet met?
		       ((and (not (null? fails))(eq? testmode 'normal))
			(debug:print-info 1 "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
				     (string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
				     ", removing it from to-do list")
			(if (not (null? tal))
			    (begin
                              ;; (thread-sleep! *global-delta*)
			      (loop (car tal)(cdr tal)(cons hed reruns)))))
		       (else
			(debug:print 8 "ERROR: No handler for this condition.")
			;; TRY (thread-sleep! (+ 1 *global-delta*))
			(loop (car newtal)(cdr newtal) reruns)))) ;; END OF IF CAN RUN MORE

		    ;; if can't run more just loop with next possible test
		    (begin
		      (debug:print-info 4 "processing the case with a lambda for items or 'have-procedure. Moving through the queue without dropping " hed)
		      ;; (thread-sleep! (+ 2 *global-delta*))
		      (loop (car newtal)(cdr newtal) reruns))))) ;; END OF (or (procedure? items)(eq? items 'have-procedure))
	     
	     ;; this case should not happen, added to help catch any bugs
	     ((and (list? items) itemdat)
	      (debug:print 0 "ERROR: Should not have a list of items in a test and the itemspath set - please report this")
	      (exit 1))
	     ((not (null? reruns))
	      (let* ((newlst (tests:filter-non-runnable run-id tal test-records)) ;; i.e. not FAIL, WAIVED, INCOMPLETE, PASS, KILLED,
		     (junked (lset-difference equal? tal newlst)))
		(debug:print-info 4 "full drop through, if reruns is less than 100 we will force retry them, reruns=" reruns ", tal=" tal)
		(if (< num-retries max-retries)
		    (set! newlst (append reruns newlst)))
		(set! num-retries (+ num-retries 1))
		;; (thread-sleep! (+ 1 *global-delta*))
		(if (not (null? newlst))
		    ;; since reruns have been tacked on to newlst create new reruns from junked
		    (loop (car newlst)(cdr newlst)(delete-duplicates junked)))))
	     ((not (null? tal))
	      (debug:print-info 4 "I'm pretty sure I shouldn't get here."))
	     (else
	      (debug:print-info 4 "Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	     )))) ;; LET* ((test-record

    ;; we get here on "drop through" - loop for next test in queue
    ;; FIXME!!!! THIS SHOULD NOT REQUIRE AN EXIT!!!!!!!
    
    (debug:print-info 1 "All tests launched")
    (thread-sleep! 0.5)
    ;; FIXME! This harsh exit should not be necessary....
    ;; (if (not *runremote*)(exit)) ;; 
    #f)) ;; return a #f as a hint that we are done
  ;; Here we need to check that all the tests remaining to be run are eligible to run
  ;; and are not blocked by failed
  

;; test-records is a hash table testname:item_path => vector < testname testconfig waitons priority items-info ... >
(define (runs:run-tests-queue-new run-id runname test-records keyvallst flags test-patts required-tests reglen)
  ;; At this point the list of parent tests is expanded 
  ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", flags: " (hash-table->alist flags))
  (let ((run-info              (cdb:remote-run db:get-run-info #f run-id))
	(key-vals              (cdb:remote-run db:get-key-vals #f run-id))
	(sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
	(test-registry         (make-hash-table))
	(registry-mutex        (make-mutex))
	(num-retries           0)
	(max-retries           (config-lookup *configdat* "setup" "maxretries"))
	(max-concurrent-jobs   (let ((mcj (config-lookup *configdat* "setup"     "max_concurrent_jobs")))
				 (if (and mcj (string->number mcj))
				     (string->number mcj)
				     1)))) ;; length of the register queue ahead
    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))
    (if (not (null? sorted-test-names))
	(let loop ((hed         (car sorted-test-names))
		   (tal         (cdr sorted-test-names))
		   (reg         '()) ;; registered, put these at the head of tal 
		   (reruns      '()))
	  (if (not (null? reruns))(debug:print-info 4 "reruns=" reruns))
	  ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
	  (let* ((test-record (hash-table-ref test-records hed))
		 (test-name   (tests:testqueue-get-testname test-record))
		 (tconfig     (tests:testqueue-get-testconfig test-record))
		 (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))
				(if m (string->symbol m) 'normal)))
		 (waitons     (tests:testqueue-get-waitons    test-record))
		 (priority    (tests:testqueue-get-priority   test-record))
		 (itemdat     (tests:testqueue-get-itemdat    test-record)) ;; itemdat can be a string, list or #f
		 (items       (tests:testqueue-get-items      test-record))
		 (item-path   (item-list->path itemdat))
		 (newtal      (append tal (list hed)))
		 (regfull     (> (length reg) reglen)))
	    ;; (if (> (length reg) 10)
	    ;;     (begin
	    ;;       (set! tal (cons hed tal))
	    ;;       (set! hed (car reg))
	    ;;       (set! reg (cdr reg))
	    ;;       (set! newtal tal)))
	    (debug:print 6
			 "test-name: " test-name
			 "\n  hed:         " hed
			 "\n  itemdat:     " itemdat
			 "\n  items:       " items
			 "\n  item-path:   " item-path
			 "\n  waitons:     " waitons
			 "\n  num-retries: " num-retries
			 "\n  tal:         " tal
			 "\n  reruns:      " reruns)

	    ;; check for hed in waitons => this would be circular, remove it and issue an
	    ;; error
	    (if (member test-name waitons)
		(begin
		  (debug:print 0 "ERROR: test " test-name " has listed itself as a waiton, please correct this!")
		  (set! waiton (filter (lambda (x)(not (equal? x hed))) waitons))))

	    (cond ;; OUTER COND
	     ((not items) ;; when false the test is ok to be handed off to launch (but not before)
	      (if (and (not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path))
	               (not (null? tal)))
	          (loop (car tal)(cdr tal) reg reruns))
	      (let* ((run-limits-info         (runs:can-run-more-tests test-record max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
		     (have-resources          (car run-limits-info))
		     (num-running             (list-ref run-limits-info 1))
		     (num-running-in-jobgroup (list-ref run-limits-info 2))
		     (max-concurrent-jobs     (list-ref run-limits-info 3))
		     (job-group-limit         (list-ref run-limits-info 4))
		     (prereqs-not-met         (db:get-prereqs-not-met run-id waitons item-path mode: testmode))
		     (fails                   (runs:calc-fails prereqs-not-met))
		     (non-completed           (runs:calc-not-completed prereqs-not-met)))
		(debug:print-info 8 "have-resources: " have-resources " prereqs-not-met: " 
				  (string-intersperse 
				   (map (lambda (t)
					  (if (vector? t)
					      (conc (db:test-get-state t) "/" (db:test-get-status t))
					      (conc " WARNING: t is not a vector=" t )))
					prereqs-not-met) ", ") " fails: " fails)
		(debug:print-info 4 "hed=" hed "\n  test-record=" test-record "\n  test-name: " test-name "\n  item-path: " item-path "\n  test-patts: " test-patts)

		;; Don't know at this time if the test have been launched at some time in the past
		;; i.e. is this a re-launch?
		(debug:print-info 4 "run-limits-info = " run-limits-info)
		(cond ;; INNER COND #1 for a launchable test
		 ;; Check item path against item-patts
		 ((not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path)) ;; This test/itempath is not to be run
		  ;; else the run is stuck, temporarily or permanently
		  ;; but should check if it is due to lack of resources vs. prerequisites
		  (debug:print-info 1 "Skipping " (tests:testqueue-get-testname test-record) " " item-path " as it doesn't match " test-patts)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (runs:queue-next-hed tal reg reglen regfull)
			    (runs:queue-next-tal tal reg reglen regfull)
			    (runs:queue-next-reg tal reg reglen regfull)
			    reruns)))
		 ;; Registry has been started for this test but has not yet completed
		 ;; this should be rare, the case where there are only a couple of tests and the db is slow
		 ;; delay a short while and continue
		 ;; ((eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f) 'start)
		 ;;  (thread-sleep! 0.01)
		 ;;  (loop (car newtal)(cdr newtal) reruns))
		 ;; count number of 'done, if more than 100 then skip on through.
		 ((not (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f)) ;; ) ;; too many changes required. Implement later.
		  (debug:print-info 4 "Pre-registering test " test-name "/" item-path " to create placeholder" )
		  (let ((th (make-thread (lambda ()
					   (mutex-lock! registry-mutex)
					   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'start)
					   (mutex-unlock! registry-mutex)
					   ;; If haven't done it before register a top level test if this is an itemized test
					   (if (not (eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f) 'done))
					       (cdb:tests-register-test *runremote* run-id test-name ""))
					   (cdb:tests-register-test *runremote* run-id test-name item-path)
					   (mutex-lock! registry-mutex)
					   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'done)
					   (mutex-unlock! registry-mutex))
					 (conc test-name "/" item-path))))
		    (thread-start! th))
		  (runs:shrink-can-run-more-tests-count)   ;; DELAY TWEAKER (still needed?)
		  (if (and (null? tal)(null? reg))
		      (loop hed tal reg reruns)
		      (loop (runs:queue-next-hed tal reg reglen regfull)
			    (runs:queue-next-tal tal reg reglen regfull)
			    (let ((newl (append reg (list hed))))
			      (if regfull 
				  (cdr newl)
				  newl))
			    reruns)))
		 ;; At this point hed test registration must be completed.
		 ((eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f)
		       'start)
		  (debug:print-info 0 "Waiting on test registration(s): " (string-intersperse 
									   (filter (lambda (x)
										     (eq? (hash-table-ref/default test-registry x #f) 'start))
										   (hash-table-keys test-registry))
									   ", "))
		  (thread-sleep! 0.1)
		  (loop hed tal reg reruns))
		 ((not have-resources) ;; simply try again after waiting a second
		  (debug:print-info 1 "no resources to run new tests, waiting ...")
		  ;; Have gone back and forth on this but db starvation is an issue.
		  ;; wait one second before looking again to run jobs.
		  (thread-sleep! 1) ;; (+ 2 *global-delta*))
		  ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
		  (loop (car newtal)(cdr newtal) reg reruns))
		 ((and have-resources
		       (or (null? prereqs-not-met)
			   (and (eq? testmode 'toplevel)
				(null? non-completed))))
		  (run:test run-id run-info key-vals runname test-record flags #f)
		  (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'running)
		  (runs:shrink-can-run-more-tests-count)  ;; DELAY TWEAKER (still needed?)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (runs:queue-next-hed tal reg reglen regfull)
			    (runs:queue-next-tal tal reg reglen regfull)
			    (runs:queue-next-reg tal reg reglen regfull)
			    reruns)))
		 (else ;; must be we have unmet prerequisites
		  (debug:print 4 "FAILS: " fails)
		  ;; If one or more of the prereqs-not-met are FAIL then we can issue
		  ;; a message and drop hed from the items to be processed.
		  (if (null? fails)
		      (begin
			;; couldn't run, take a breather
			(debug:print-info 4 "Shouldn't really get here, race condition? Unable to launch more tests at this moment, killing time ...")
			;; (thread-sleep! (+ 0.01 *global-delta*)) ;; long sleep here - no resources, may as well be patient
			;; we made new tal by sticking hed at the back of the list
			(loop (car newtal)(cdr newtal) reg reruns))
		      ;; the waiton is FAIL so no point in trying to run hed ever again
		      (if (not (null? tal))
			  (if (vector? hed)
			      (begin 
				(debug:print 1 "WARN: Dropping test " (db:test-get-testname hed) "/" (db:test-get-item-path hed)
					     " from the launch list as it has prerequistes that are FAIL")
				(runs:shrink-can-run-more-tests-count) ;; DELAY TWEAKER (still needed?)
				;; (thread-sleep! *global-delta*)
				(hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'removed)
				(loop (runs:queue-next-hed tal reg reglen regfull)
				      (runs:queue-next-tal tal reg reglen regfull)
				      (runs:queue-next-reg tal reg reglen regfull)
				      (cons hed reruns)))
			      (begin
				(debug:print 1 "WARN: Test not processed correctly. Could be a race condition in your test implementation? " hed) ;;  " as it has prerequistes that are FAIL. (NOTE: hed is not a vector)")
				(runs:shrink-can-run-more-tests-count) ;; DELAY TWEAKER (still needed?)
				;; (thread-sleep! (+ 0.01 *global-delta*))
				(loop hed tal reg reruns))))))))) ;; END OF INNER COND
	     
	     ;; case where an items came in as a list been processed
	     ((and (list? items)     ;; thus we know our items are already calculated
		   (not   itemdat)) ;; and not yet expanded into the list of things to be done
	      (if (and (debug:debug-mode 1) ;; (>= *verbosity* 1)
		       (> (length items) 0)
		       (> (length (car items)) 0))
		  (pp items))
	      (for-each
	       (lambda (my-itemdat)
		 (let* ((new-test-record (let ((newrec (make-tests:testqueue)))
					   (vector-copy! test-record newrec)
					   newrec))
			(my-item-path (item-list->path my-itemdat)))
		   (if (tests:match test-patts hed my-item-path) ;; (patt-list-match my-item-path item-patts)           ;; yes, we want to process this item, NOTE: Should not need this check here!
		       (let ((newtestname (runs:make-full-test-name hed my-item-path)))    ;; test names are unique on testname/item-path
			 (tests:testqueue-set-items!     new-test-record #f)
			 (tests:testqueue-set-itemdat!   new-test-record my-itemdat)
			 (tests:testqueue-set-item_path! new-test-record my-item-path)
			 (hash-table-set! test-records newtestname new-test-record)
			 (set! tal (cons newtestname tal)))))) ;; since these are itemized create new test names testname/itempath
	       items)
	      (if (not (null? tal))
		  (begin
		    (debug:print-info 4 "End of items list, looping with next after short delay")
		    ;; (thread-sleep! (+ 0.01 *global-delta*))
		    (loop (runs:queue-next-hed tal reg reglen regfull)
			  (runs:queue-next-tal tal reg reglen regfull)
			  (runs:queue-next-reg tal reg reglen regfull)
			  reruns))))

	     ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	     ;;    - but only do that if resources exist to kick off the job
	     ((or (procedure? items)(eq? items 'have-procedure))
	      (let ((can-run-more    (runs:can-run-more-tests test-record max-concurrent-jobs)))
		(if (and (list? can-run-more)
			 (car can-run-more))
		    (let* ((prereqs-not-met (db:get-prereqs-not-met run-id waitons item-path mode: testmode))
			   (fails           (runs:calc-fails prereqs-not-met))
			   (non-completed   (runs:calc-not-completed prereqs-not-met)))
		      (debug:print-info 8 "can-run-more: " can-run-more
					"\n testname:        " hed
					"\n prereqs-not-met: " (runs:pretty-string prereqs-not-met)
					"\n non-completed:   " (runs:pretty-string non-completed) 
					"\n fails:           " (runs:pretty-string fails)
					"\n testmode:        " testmode
					"\n num-retries:     " num-retries
					"\n (eq? testmode 'toplevel): " (eq? testmode 'toplevel)
					"\n (null? non-completed):    " (null? non-completed)
					"\n reruns:          " reruns
					"\n items:           " items
					"\n can-run-more:    " can-run-more)
		      ;; (thread-sleep! (+ 0.01 *global-delta*))
		      (cond ;; INNER COND #2
		       ((or (null? prereqs-not-met) ;; all prereqs met, fire off the test
			    ;; or, if it is a 'toplevel test and all prereqs not met are COMPLETED then launch
			    (and (eq? testmode 'toplevel)
				 (null? non-completed)))
			(let ((test-name (tests:testqueue-get-testname test-record)))
			  (setenv "MT_TEST_NAME" test-name) ;; 
			  (setenv "MT_RUNNAME"   runname)
			  (set-megatest-env-vars run-id) ;; these may be needed by the launching process
			  (let ((items-list (items:get-items-from-config tconfig)))
			    (if (list? items-list)
				(begin
				  (tests:testqueue-set-items! test-record items-list)
				  ;; (thread-sleep! *global-delta*)
				  (loop hed tal reg reruns))
				(begin
				  (debug:print 0 "ERROR: The proc from reading the setup did not yield a list - please report this")
				  (exit 1))))))
		       ((null? fails)
			(debug:print-info 4 "fails is null, moving on in the queue but keeping " hed " for now")
			;; only increment num-retries when there are no tests runing
			(if (eq? 0 (list-ref can-run-more 1))
			    (begin
			      ;; TRY (if (> num-retries 100) ;; first 100 retries are low time cost
			      ;; TRY     (thread-sleep! (+ 2 *global-delta*))
			      ;; TRY     (thread-sleep! (+ 0.01 *global-delta*)))
			      (set! num-retries (+ num-retries 1))))
			(if (> num-retries  max-retries)
			    (if (not (null? tal))
				(loop (runs:queue-next-hed tal reg reglen regfull)
				      (runs:queue-next-tal tal reg reglen regfull)
				      (runs:queue-next-reg tal reg reglen regfull)
				      reruns))
			    (loop (car newtal)(cdr newtal) reg reruns))) ;; an issue with prereqs not yet met?
		       ((and (not (null? fails))(eq? testmode 'normal))
			(debug:print-info 1 "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
					  (string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
					  ", removing it from to-do list")
			(if (not (null? tal))
			    (begin
			      ;; (thread-sleep! *global-delta*)
			      (loop (runs:queue-next-hed tal reg reglen regfull)
				    (runs:queue-next-tal tal reg reglen regfull)
				    (runs:queue-next-reg tal reg reglen regfull)
				    (cons hed reruns)))))
		       (else
			(debug:print 8 "ERROR: No handler for this condition.")
			;; TRY (thread-sleep! (+ 1 *global-delta*))
			(loop (car newtal)(cdr newtal) reg reruns)))) ;; END OF IF CAN RUN MORE

		    ;; if can't run more just loop with next possible test
		    (begin
		      (debug:print-info 4 "processing the case with a lambda for items or 'have-procedure. Moving through the queue without dropping " hed)
		      ;; (thread-sleep! (+ 2 *global-delta*))
		      (loop (car newtal)(cdr newtal) reg reruns))))) ;; END OF (or (procedure? items)(eq? items 'have-procedure))
	     
	     ;; this case should not happen, added to help catch any bugs
	     ((and (list? items) itemdat)
	      (debug:print 0 "ERROR: Should not have a list of items in a test and the itemspath set - please report this")
	      (exit 1))
	     ((not (null? reruns))
	      (let* ((newlst (tests:filter-non-runnable run-id tal test-records)) ;; i.e. not FAIL, WAIVED, INCOMPLETE, PASS, KILLED,
		     (junked (lset-difference equal? tal newlst)))
		(debug:print-info 4 "full drop through, if reruns is less than 100 we will force retry them, reruns=" reruns ", tal=" tal)
		(if (< num-retries max-retries)
		    (set! newlst (append reruns newlst)))
		(set! num-retries (+ num-retries 1))
		;; (thread-sleep! (+ 1 *global-delta*))
		(if (not (null? newlst))
		    ;; since reruns have been tacked on to newlst create new reruns from junked
		    (loop (car newlst)(cdr newlst) reg (delete-duplicates junked)))))
	     ((not (null? tal))
	      (debug:print-info 4 "I'm pretty sure I shouldn't get here."))
	     ((not (null? reg)) ;; could we get here with leftovers?
	      (debug:print-info 0 "Have leftovers!")
	      (loop (car reg)(cdr reg) '() reruns))
	     (else
	      (debug:print-info 4 "Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	     )))) ;; LET* ((test-record

    ;; we get here on "drop through" - loop for next test in queue
    ;; FIXME!!!! THIS SHOULD NOT REQUIRE AN EXIT!!!!!!!
    
    (debug:print-info 1 "All tests launched")
    (thread-sleep! 0.5)
    ;; FIXME! This harsh exit should not be necessary....
    ;; (if (not *runremote*)(exit)) ;; 
    #f)) ;; return a #f as a hint that we are done
;; Here we need to check that all the tests remaining to be run are eligible to run
;; and are not blocked by failed

;;======================================================================
;; Copyright 2006-2012, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

(define-inline (runs:runrec-make-record) (make-vector 13))
(define-inline (runs:runrec-get-target  vec)(vector-ref vec 0))  ;; a/b/c
(define-inline (runs:runrec-get-runname vec)(vector-ref vec 1))  ;; string
(define-inline (runs:runrec-testpatt    vec)(vector-ref vec 2))  ;; a,b/c,d%
(define-inline (runs:runrec-keys        vec)(vector-ref vec 3))  ;; (key1 key2 ...)
(define-inline (runs:runrec-keyvals     vec)(vector-ref vec 4))  ;; ((key1 val1)(key2 val2) ...)
(define-inline (runs:runrec-environment vec)(vector-ref vec 5))  ;; environment, alist key val
(define-inline (runs:runrec-mconfig     vec)(vector-ref vec 6))  ;; megatest.config
(define-inline (runs:runrec-runconfig   vec)(vector-ref vec 7))  ;; runconfigs.config
(define-inline (runs:runrec-serverdat   vec)(vector-ref vec 8))  ;; (host port)
(define-inline (runs:runrec-transport   vec)(vector-ref vec 9))  ;; 'http
(define-inline (runs:runrec-db          vec)(vector-ref vec 10)) ;; <sqlite3db> (if 'fs)
(define-inline (runs:runrec-top-path    vec)(vector-ref vec 11)) ;; *toppath*
(define-inline (runs:runrec-run_id      vec)(vector-ref vec 12)) ;; run-id

(define-inline (test:get-id vec)       (vector-ref vec 0))
(define-inline (test:get-run_id vec)   (vector-ref vec 1))
(define-inline (test:get-test-name vec)(vector-ref vec 2))
(define-inline (test:get-state vec)    (vector-ref vec 3))
(define-inline (test:get-status vec)   (vector-ref vec 4))
(define-inline (test:get-item-path vec)(vector-ref vec 5))

;;======================================================================
;; read a config file, loading only the section pertinent
;; to this run field1val/field2val/field3val ...
;;======================================================================

(use format directory-utils)

(declare (unit runconfig))
(declare (uses common))

(include "common_records.scm")




(define (setup-env-defaults fname run-id already-seen keyvals #!key (environ-patt #f)(change-env #t))
  (let* ((keys    (map car keyvals))

	 (thekey  (if keyvals (string-intersperse (map (lambda (x)(if x x "-na-")) (map cadr keyvals)) "/")

		      (or (args:get-arg "-reqtarg") 
			  (args:get-arg "-target")
			  (get-environment-variable "MT_TARGET")
			  (begin
			    (debug:print 0 "ERROR: setup-env-defaults called with no run-id or -target or -reqtarg")
			    "nothing matches this I hope"))))
	 ;; Why was system disallowed in the reading of the runconfigs file?
	 ;; NOTE: Should be setting env vars based on (target|default)
	 (confdat (read-config fname #f #t environ-patt: environ-patt sections: (list "default" thekey)))
	 (whatfound (make-hash-table))
	 (finaldat  (make-hash-table))
	 (sections (list "default" thekey)))
    (if (not *target*)(set! *target* thekey)) ;; may save a db access or two but repeats db:get-target code
    (debug:print 4 "Using key=\"" thekey "\"")

    (if change-env
	(for-each ;; NB// This can be simplified with new content of keyvals having all that is needed.
	 (lambda (keyval)
	   (setenv (car keyval)(cadr keyval)))
	 keyvals))
	
    (for-each 
     (lambda (section)
       (let ((section-dat (hash-table-ref/default confdat section #f)))
	 (if section-dat
	     (for-each 
	      (lambda (envvar)

	  (for-each (lambda (fullkey)
		      (debug:print 2 (format #f "~20a ~a\n" fullkey (hash-table-ref/default whatfound fullkey 0))))
		    sections)
	  (debug:print 2 "---")
	  (set! *already-seen-runconfig-info* #t)))
    finaldat))

(define (set-run-config-vars run-id keyvals targ-from-db)
  (push-directory *toppath*) ;; the push/pop doesn't appear to do anything ...
  (let ((runconfigf (conc  *toppath* "/runconfigs.config"))
	(targ       (or (args:get-arg "-target")
			(args:get-arg "-reqtarg")
			targ-from-db
			(get-environment-variable "MT_TARGET"))))
    (pop-directory)
    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id #t keyvals
			    environ-patt: (conc "(default"
						(if targ
						    (conc "|" targ ")")
						    ")")))
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))))
 

(use srfi-69)

(define (runs:queue-next-hed tal reg n regful)
  (if regful
      (car reg)
      (car tal)))

(define (runs:queue-next-tal tal reg n regful)
  (if regful
      tal
      (let ((newtal (cdr tal)))
	(if (null? newtal)
	    reg
	    newtal
	    ))))

(define (runs:queue-next-reg tal reg n regful)
  (if regful
      (cdr reg)
      (if (eq? (length tal) 1)
	  '()
	  reg)))

(use trace)
(trace runs:queue-next-hed
       runs:queue-next-tal
       runs:queue-next-reg)


(define tests '(1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20))

(define test-registry (make-hash-table))

(define n 3)

(let loop ((hed   (car tests))
           (tal   (cdr tests))
           (reg   '()))
  (let* ((reglen (length reg))
	 (regful (> reglen n)))
    (print "hed=" hed ", length reg=" (length reg) ", (> lenreg n)=" (> (length reg) n))
    (let ((newtal (append tal (list hed)))) ;; used if we are not done with this test
      (cond
       ((not (hash-table-ref/default test-registry hed #f))
	(hash-table-set! test-registry hed #t)
	(print "Registering #" hed)
	(if (not (null? tal))
          (loop (runs:queue-next-hed tal reg n regful)
                (runs:queue-next-tal tal reg n regful)
		(let ((newl (append reg (list hed))))
		  (if regful
		      (cdr newl)
		      newl)))))
       (else
	(print "Running #" hed)
	(if (not (null? tal))
	    (loop (runs:queue-next-hed tal reg n regful)
		  (runs:queue-next-tal tal reg n regful)
		  (runs:queue-next-reg tal reg n regful))))))))

;; runs:get-runs-by-patt
;; get runs by list of criteria
;; register a test run with the db
;;
;; Use: (db-get-value-by-header (db:get-header runinfo)(db:get-row runinfo))
;;  to extract info from the structure returned
;;
(define (runs:get-runs-by-patt db keys runnamepatt targpatt) ;; test-name)

  (let* ((tmp      (runs:get-std-run-fields keys '("id" "runname" "state" "status" "owner" "event_time")))
	 (keystr   (car tmp))
	 (header   (cadr tmp))
	 (res     '())
	 (key-patt "")
	 (runwildtype (if (substring-index "%" runnamepatt) "like" "glob"))
	 (qry-str  #f)
	 (keyvals  (keys:target->keyval keys targpatt)))
    (for-each (lambda (keyval)
		(let* ((key    (car keyval))
		       (patt   (cadr keyval))
		       (fulkey (conc ":" key))

		       (wildtype (if (substring-index "%" patt) "like" "glob")))
		  (if patt
		      (set! key-patt (conc key-patt " AND " key " " wildtype " '" patt "'"))
		      (begin
			(debug:print 0 "ERROR: searching for runs with no pattern set for " fulkey)
			(exit 6)))))
	      keyvals)
    (set! qry-str (conc "SELECT " keystr " FROM runs WHERE runname " runwildtype " ? " key-patt ";"))
    (debug:print-info 4 "runs:get-runs-by-patt qry=" qry-str " " runnamepatt)
    (sqlite3:for-each-row 
     (lambda (a . r)
       (set! res (cons (list->vector (cons a r)) res)))
     db 
     qry-str
     runnamepatt)
    (vector header res)))

(define (runs:test-get-full-path test)
  (let* ((testname (db:test-get-testname   test))
	 (itempath (db:test-get-item-path test)))
    (conc testname (if (equal? itempath "") "" (conc "(" itempath ")")))))

;; This is the *new* methodology. One record to inform them and in the chaos, organise them.
;;
(define (runs:create-run-record)
  (let* ((mconfig      (if *configdat*

		           *configdat*
		           (if (setup-for-run)
		               *configdat*
		               (begin
		                 (debug:print 0 "ERROR: Called setup in a non-megatest area, exiting")
		                 (exit 1)))))
	  (runrec      (runs:runrec-make-record))
	  (target      (or (args:get-arg "-reqtarg")
		           (args:get-arg "-target")))
	  (runname     (or (args:get-arg ":runname")
		           (args:get-arg "-runname")))
	  (testpatt    (or (args:get-arg "-testpatt")
		           (args:get-arg "-runtests")))
	  (keys        (keys:config-get-fields mconfig))
	  (keyvals     (keys:target->keyval keys target))
	  (toppath     *toppath*)
	  (envdat      keyvals) ;; initial values start with keyvals
	  (runconfig   #f)
	  (serverdat   (if (args:get-arg "-server")
			   *runremote*
			   #f)) ;; to be used later
	  (transport   (or (args:get-arg "-transport") 'http))
	  (db          (if (and mconfig
				(or (args:get-arg "-server")
				    (eq? transport 'fs)))
			   (open-db)
			   #f))
	  (run-id      #f))
    ;; Set all the environment vars we know so far, start with keys
    (for-each (lambda (keyval)
		(setenv (car keyval)(cadr keyval)))
	      keyvals)
    ;; Set up various and sundry known vars here
    (setenv "MT_RUN_AREA_HOME" toppath)

    (setenv "MT_RUNNAME" runname)
    (setenv "MT_TARGET"  target)
    (set! envdat (append 
		  envdat
		  (list (list "MT_RUN_AREA_HOME" toppath)
			(list "MT_RUNNAME"       runname)
			(list "MT_TARGET"        target))))
    ;; Now can read the runconfigs file
    ;; 
    (set! runconfig (read-config (conc  *toppath* "/runconfigs.config") #f #t sections: (list "default" target)))
    (if (not (hash-table-ref/default runconfig (args:get-arg "-reqtarg") #f))
	(begin
	  (debug:print 0 "ERROR: [" (args:get-arg "-reqtarg") "] not found in " runconfigf)
	  (if db (sqlite3:finalize! db))
	  (exit 1)))
    ;; Now have runconfigs data loaded, set environment vars
    (for-each (lambda (section)
		(for-each (lambda (varval)
			    (set! envdat (append envdat (list varval)))
			    (setenv (car varval)(cadr varval)))
			  (configf:get-section runconfig section)))
	      (list "default" target))
    (vector target runname testpatt keys keyvals envdat mconfig runconfig serverdat transport db toppath run-id)))

	 
(define (set-megatest-env-vars run-id #!key (inkeys #f)(inrunname #f)(inkeyvals #f))
  (let* ((target      (or (args:get-arg "-reqtarg")
			  (args:get-arg "-target")
			  (get-environment-variable "MT_TARGET")))
	 (keys    (if inkeys    inkeys    (cdb:remote-run db:get-keys #f)))
	 (keyvals (if inkeyvals inkeyvals (keys:target->keyval keys target)))
	 (vals (hash-table-ref/default *env-vars-by-run-id* run-id #f)))
    ;; get the info from the db and put it in the cache
    (if (not vals)
	(let ((ht (make-hash-table)))
	  (hash-table-set! *env-vars-by-run-id* run-id ht)
	  (set! vals ht)
	  (for-each
	   (lambda (key)
	     (hash-table-set! vals (car key) (cadr key))) ;; (cdb:remote-run db:get-run-key-val #f run-id (car key))))
	   keyvals)))
    ;; from the cached data set the vars
    (hash-table-for-each
     vals
     (lambda (key val)
       (debug:print 2 "setenv " key " " val)
       (setenv key val)))
    (alist->env-vars (hash-table-ref/default *configdat* "env-override" '()))
    ;; Lets use this as an opportunity to put MT_RUNNAME in the environment
    (setenv "MT_RUNNAME" (if inrunname inrunname (cdb:remote-run db:get-run-name-from-id #f run-id)))
    (setenv "MT_RUN_AREA_HOME" *toppath*)))


(define (set-item-env-vars itemdat)
  (for-each (lambda (item)
	      (debug:print 2 "setenv " (car item) " " (cadr item))
	      (setenv (car item) (cadr item)))
	    itemdat))

(define *last-num-running-tests* 0)

;; Every time can-run-more-tests is called increment the delay
;; if the cou
(define *runs:can-run-more-tests-count* 0)
(define (runs:shrink-can-run-more-tests-count)
  (set! *runs:can-run-more-tests-count* 0)) ;; (/ *runs:can-run-more-tests-count* 2)))

(define (runs:can-run-more-tests test-record max-concurrent-jobs)
  (thread-sleep! (cond
		  ((> *runs:can-run-more-tests-count* 20) 2);; obviously haven't had any work to do for a while
		  (else 0)))
  (let* ((tconfig                 (tests:testqueue-get-testconfig test-record))
	 (jobgroup                (config-lookup tconfig "requirements" "jobgroup"))




	 (num-running             (cdb:remote-run db:get-count-tests-running #f))
	 (num-running-in-jobgroup (cdb:remote-run db:get-count-tests-running-in-jobgroup #f jobgroup))




	 (job-group-limit         (config-lookup *configdat* "jobgroups" jobgroup)))
    (if (> (+ num-running num-running-in-jobgroup) 0)
	(set! *runs:can-run-more-tests-count* (+ *runs:can-run-more-tests-count* 1)))



    (if (not (eq? *last-num-running-tests* num-running))
	(begin
	  (debug:print 2 "max-concurrent-jobs: " max-concurrent-jobs ", num-running: " num-running)
	  (set! *last-num-running-tests* num-running)))
    (if (not (eq? 0 *globalexitstatus*))
	(list #f num-running num-running-in-jobgroup max-concurrent-jobs job-group-limit)
	(let ((can-not-run-more (cond

;;======================================================================
;; New methodology. These routines will replace the above in time. For
;; now the code is duplicated. This stuff is initially used in the monitor
;; based code.
;;======================================================================
































;; This is a duplicate of run-tests (which has been deprecated). Use this one instead of run tests.
;; keyvals.
;;
;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.
;;              FIXME: error out if /patt specified
;;            
(define (runs:run-tests target runname test-patts user flags) ;; test-names
  (common:clear-caches) ;; clear all caches
  (let* ((db          #f)
	 (keys        (keys:config-get-fields *configdat*))
	 (keyvals     (keys:target->keyval keys target))
	 (run-id      (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))  ;;  test-name)))

	 (deferred    '()) ;; delay running these since they have a waiton clause
	 ;; keepgoing is the defacto modality now, will add hit-n-run a bit later
	 ;; (keepgoing   (hash-table-ref/default flags "-keepgoing" #f))
	 (runconfigf   (conc  *toppath* "/runconfigs.config"))
	 (required-tests '())
	 (test-records (make-hash-table))
	 (all-test-names (tests:get-valid-tests *toppath* "%"))) ;; we need a list of all valid tests to check waiton names

    (set-megatest-env-vars run-id inkeys: keys) ;; these may be needed by the launching process

    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals "pre-launch-env-vars")
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))
    
    ;; look up all tests matching the comma separated list of globs in
    ;; test-patts (using % as wildcard)

    (set! test-names (tests:get-valid-tests *toppath* test-patts))
    (set! test-names (delete-duplicates test-names))

    (debug:print-info 0 "test names " test-names)

    ;; on the first pass or call to run-tests set FAILS to NOT_STARTED if
    ;; -keepgoing is specified
    (if (eq? *passnum* 0)

    ;; from here on out the db will be opened and closed on every call runs:run-tests-queue
    ;; (sqlite3:finalize! db) 
    ;; now add non-directly referenced dependencies (i.e. waiton)
    (if (not (null? test-names))
	(let loop ((hed (car test-names))
		   (tal (cdr test-names)))         ;; 'return-procs tells the config reader to prep running system but return a proc

	  (let* ((config  (tests:get-testconfig hed 'return-procs))
		 (waitons (let ((instr (if config 
					   (config-lookup config "requirements" "waiton")
					   (begin ;; No config means this is a non-existant test
					     (debug:print 0 "ERROR: non-existent required test \"" hed "\"")
					     (if db (sqlite3:finalize! db))
					     (exit 1)))))
			    (debug:print-info 8 "waitons string is " instr)
			    (let ((newwaitons
				   (string-split (cond
						  ((procedure? instr)
						   (let ((res (instr)))
						     (debug:print-info 8 "waiton procedure results in string " res " for test " hed)
						     res))
						  ((string? instr)     instr)
						  (else 
						   ;; NOTE: This is actually the case of *no* waitons! ;; (debug:print 0 "ERROR: something went wrong in processing waitons for test " hed)
						   "")))))
			      (filter (lambda (x)
					(if (member x all-test-names)
					    #t
					    (begin
					      (debug:print 0 "ERROR: test " hed " has unrecognised waiton testname " x)
					      #f)))
				      newwaitons)))))
	    (debug:print-info 8 "waitons: " waitons)
	    ;; check for hed in waitons => this would be circular, remove it and issue an
	    ;; error
	    (if (member hed waitons)
		(begin
		  (debug:print 0 "ERROR: test " hed " has listed itself as a waiton, please correct this!")
		  (set! waitons (filter (lambda (x)(not (equal? x hed))) waitons))))

							   (let ((val (car x)))
							     (if (procedure? val) val #f)))
							 (append (if (list? items) items '())
								 (if (list? itemstable) itemstable '())))
						 'have-procedure)
						((or (list? items)(list? itemstable)) ;; calc now
						 (debug:print-info 4 "items and itemstable are lists, calc now\n"
								   "    items: " items " itemstable: " itemstable)
						 (items:get-items-from-config config))
						(else #f)))                           ;; not iterated
					     #f      ;; itemsdat 5
					     #f      ;; spare - used for item-path
					     )))
	    (for-each 
	     (lambda (waiton)
	       (if (and waiton (not (member waiton test-names)))
		   (begin
		     (set! required-tests (cons waiton required-tests))
		     (set! test-names (cons waiton test-names))))) ;; was an append, now a cons
	     waitons)
	    (let ((remtests (delete-duplicates (append waitons tal))))
	      (if (not (null? remtests))
		  (loop (car remtests)(cdr remtests)))))))

    (if (not (null? required-tests))
	(debug:print-info 1 "Adding " required-tests " to the run queue"))
    ;; NOTE: these are all parent tests, items are not expanded yet.
    (debug:print-info 4 "test-records=" (hash-table->alist test-records))
    (let ((reglen (any->number  (configf:lookup *configdat* "setup" "runqueue"))))
      (if reglen
	  (runs:run-tests-queue-new     run-id runname test-records keyvals flags test-patts required-tests reglen)
	  (runs:run-tests-queue-classic run-id runname test-records keyvals flags test-patts required-tests)))
    (debug:print-info 4 "All done by here")))

(define (runs:calc-fails prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (equal? (db:test-get-state test) "COMPLETED")
		 (not (member (db:test-get-status test)

	     (conc t)
	     (conc (db:test-get-testname t) ":" (db:test-get-state t) "/" (db:test-get-status t))))
       lst))

(define (runs:make-full-test-name testname itempath)
  (if (equal? itempath "") testname (conc testname "/" itempath)))


(define (runs:queue-next-hed tal reg n regful)








  (if regful
















      (if (null? reg) ;; doesn't make sense, this is probably NOT the problem of the car








	  (car tal)

	  (car reg))






      (car tal)))







































(define (runs:queue-next-tal tal reg n regful)






  (if regful






      tal
      (let ((newtal (cdr tal)))




	(if (null? newtal)
	    reg




	    newtal













	    ))))






























(define (runs:queue-next-reg tal reg n regful)
  (if regful













      (cdr reg)






      (if (eq? (length tal) 1)







	  '()





	  reg)))































(include "run-tests-queue-classic.scm")




















(include "run-tests-queue-new.scm")












;; parent-test is there as a placeholder for when parent-tests can be run as a setup step
(define (run:test run-id run-info keyvals runname test-record flags parent-test)
  ;; All these vars might be referenced by the testconfig file reader
  (let* ((test-name    (tests:testqueue-get-testname   test-record))
	 (test-waitons (tests:testqueue-get-waitons    test-record))
	 (test-conf    (tests:testqueue-get-testconfig test-record))
	 (itemdat      (tests:testqueue-get-itemdat    test-record))
	 (test-path    (conc *toppath* "/tests/" test-name)) ;; could use tests:get-testconfig here ...
	 (force        (hash-table-ref/default flags "-force" #f))

		 )
    ;; setting itemdat to a list if it is #f
    (if (not itemdat)(set! itemdat '()))
    (set! item-path (item-list->path itemdat))
    (debug:print 2 "Attempting to launch test " test-name (if (equal? item-path "/") "/" item-path))
    (setenv "MT_TEST_NAME" test-name) ;; 
    (setenv "MT_RUNNAME"   runname)
    (set-megatest-env-vars run-id inrunname: runname) ;; these may be needed by the launching process
    (change-directory *toppath*)

    ;; Here is where the test_meta table is best updated
    ;; Yes, another use of a global for caching. Need a better way?
    (if (not (hash-table-ref/default *test-meta-updated* test-name #f))
        (begin
	   (hash-table-set! *test-meta-updated* test-name #t)
           (runs:update-test_meta test-name test-conf)))
    
    ;; (lambda (itemdat) ;;; ((ripeness "overripe") (temperature "cool") (season "summer"))
    (let* ((new-test-path (string-intersperse (cons test-path (map cadr itemdat)) "/"))
	   (new-test-name (if (equal? item-path "") test-name (conc test-name "/" item-path))) ;; just need it to be unique
	   (test-id       (cdb:remote-run db:get-test-id #f  run-id test-name item-path))
	   (testdat       (cdb:get-test-info-by-id *runremote* test-id)))
      (if (not testdat)
	  (begin
	    ;; ensure that the path exists before registering the test
	    ;; NOPE: Cannot! Don't know yet which disk area will be assigned....
	    ;; (system (conc "mkdir -p " new-test-path))
	    ;;
	    ;; (open-run-close tests:register-test db run-id test-name item-path)
	    ;;
	    ;; NB// for the above line. I want the test to be registered long before this routine gets called!
	    ;;
	    (set! test-id (open-run-close db:get-test-id db run-id test-name item-path))
	    (if (not test-id)
		(begin
		  (debug:print 2 "WARN: Test not pre-created? test-name=" test-name ", item-path=" item-path ", run-id=" run-id)
		  (cdb:tests-register-test *runremote* run-id test-name item-path)
		  (set! test-id (open-run-close db:get-test-id db run-id test-name item-path))))
	    (debug:print-info 4 "test-id=" test-id ", run-id=" run-id ", test-name=" test-name ", item-path=\"" item-path "\"")
	    (set! testdat (cdb:get-test-info-by-id *runremote* test-id))))
      (if (not testdat) ;; should NOT happen
	  (debug:print 0 "ERROR: failed to get test record for test-id " test-id))
      (set! test-id (db:test-get-id testdat))
      (change-directory test-path)
      (case (if force ;; (args:get-arg "-force")
		'NOT_STARTED
		(if testdat
		    (string->symbol (test:get-state testdat))
		    'failed-to-insert))

	   (if (not runflag)
	       (if (not parent-test)
		   (debug:print 1 "NOTE: Not starting test " new-test-name " as it is state \"" (test:get-state testdat) 
				"\" and status \"" (test:get-status testdat) "\", use -rerun \"" (test:get-status testdat)
                                "\" or -force to override"))
	       ;; NOTE: No longer be checking prerequisites here! Will never get here unless prereqs are
	       ;;       already met.
	       ;; This would be a great place to do the process-fork
	       (if (not (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat flags))
		   (begin
		     (print "ERROR: Failed to launch the test. Exiting as soon as possible")
		     (set! *globalexitstatus* 1) ;; 
		     (process-signal (current-process-id) signal/kill))))))
	((KILLED) 
	 (debug:print 1 "NOTE: " new-test-name " is already running or was explictly killed, use -force to launch it."))
	((LAUNCHED REMOTEHOSTSTART RUNNING)  

;; fields are passing in through 
;; action:
;;    'remove-runs
;;    'set-state-status
;;
;; NB// should pass in keys?
;;
(define (runs:operate-on action target runnamepatt testpatt #!key (state #f)(status #f)(new-state-status #f))
  (common:clear-caches) ;; clear all caches
  (let* ((db           #f)
	 (keys         (open-run-close db:get-keys db))
	 (rundat       (open-run-close runs:get-runs-by-patt db keys runnamepatt target))
	 (header       (vector-ref rundat 0))
	 (runs         (vector-ref rundat 1))
	 (states       (if state  (string-split state  ",") '()))
	 (statuses     (if status (string-split status ",") '()))
	 (state-status (if (string? new-state-status) (string-split new-state-status ",") '(#f #f))))
    (debug:print-info 4 "runs:operate-on => Header: " header " action: " action " new-state-status: " new-state-status)
    (if (> 2 (length state-status))
	(begin
	  (debug:print 0 "ERROR: the parameter to -set-state-status is a comma delimited string. E.g. COMPLETED,FAIL")
	  (exit)))
    (for-each
     (lambda (run)
       (let ((runkey (string-intersperse (map (lambda (k)
						(db:get-value-by-header run header k)) keys) "/"))
	     (dirs-to-remove (make-hash-table)))
	 (let* ((run-id    (db:get-value-by-header run header "id"))
		(run-state (db:get-value-by-header run header "state"))
		(tests     (if (not (equal? run-state "locked"))
			       (open-run-close db:get-tests-for-run db run-id
						      testpatt states statuses
						      not-in:  #f

;; Since many calls to a run require pretty much the same setup 
;; this wrapper is used to reduce the replication of code
(define (general-run-call switchname action-desc proc)
  (let ((runname (args:get-arg ":runname"))
	(target  (if (args:get-arg "-target")
		     (args:get-arg "-target")
		     (args:get-arg "-reqtarg"))))
	;; (th1     #f))
    (cond
     ((not target)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the target with -target")
      (exit 3))
     ((not runname)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the run name with :runname runname")
      (exit 3))
     (else
      (let ((db   #f)
	    (keys #f)
	    (target (or (args:get-arg "-reqtarg")
			(args:get-arg "-target"))))
	(if (not (setup-for-run))
	    (begin 
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	;; (if (args:get-arg "-server")
	;;     (open-run-close server:start db (args:get-arg "-server")))




	(set! keys (keys:config-get-fields *configdat*))
	;; have enough to process -target or -reqtarg here
	(if (args:get-arg "-reqtarg")
	    (let* ((runconfigf (conc  *toppath* "/runconfigs.config")) ;; DO NOT EVALUATE ALL 
		   (runconfig  (read-config runconfigf #f #t environ-patt: #f)))
	      (if (hash-table-ref/default runconfig (args:get-arg "-reqtarg") #f)
		  (keys:target-set-args keys (args:get-arg "-reqtarg") args:arg-hash)
		    
		  (begin
		    (debug:print 0 "ERROR: [" (args:get-arg "-reqtarg") "] not found in " runconfigf)
		    (if db (sqlite3:finalize! db))
		    (exit 1))))
	    (if (args:get-arg "-target")
		(keys:target-set-args keys (args:get-arg "-target" args:arg-hash) args:arg-hash)))
	(if (not (car *configinfo*))
	    (begin
	      (debug:print 0 "ERROR: Attempted to " action-desc " but run area config file not found")
	      (exit 1))
	    ;; Extract out stuff needed in most or many calls
	    ;; here then call proc
	    (let* ((keyvals    (keys:target->keyval keys target)))

	      (proc target runname keys keyvals)))

	(if db (sqlite3:finalize! db))
	(set! *didsomething* #t))))))

;;======================================================================
;; Lock/unlock runs
;;======================================================================

(define (runs:handle-locking target keys runname lock unlock user)
  (let* ((db       #f)
	 (rundat   (open-run-close runs:get-runs-by-patt db keys runname target))
	 (header   (vector-ref rundat 0))
	 (runs     (vector-ref rundat 1)))
    (for-each (lambda (run)
		(let ((run-id (db:get-value-by-header run header "id")))
		  (if (or lock
			  (and unlock
			       (begin
				 (print "Do you really wish to unlock run " run-id "?\n   y/n: ")
				 (equal? "y" (read-line)))))
		      (open-run-close db:lock/unlock-run db run-id lock unlock user)
		      (debug:print-info 0 "Skipping lock/unlock on " run-id))))
	      runs)))
;;======================================================================
;; Rollup runs
;;======================================================================

;; Update the test_meta table for this test
(define (runs:update-test_meta test-name test-conf)
  (let ((currrecord (cdb:remote-run db:testmeta-get-record #f test-name)))
    (if (not currrecord)
	(begin
	  (set! currrecord (make-vector 10 #f))
	  (cdb:remote-run db:testmeta-add-record #f test-name)))
    (for-each 
     (lambda (key)
       (let* ((idx (cadr key))
	      (fld (car  key))
	      (val (config-lookup test-conf "test_meta" fld)))
	 ;; (debug:print 5 "idx: " idx " fld: " fld " val: " val)
	 (if (and val (not (equal? (vector-ref currrecord idx) val)))
	     (begin
	       (print "Updating " test-name " " fld " to " val)
	       (cdb:remote-run db:testmeta-update-field #f test-name fld val)))))
     '(("author" 2)("owner" 3)("description" 4)("reviewed" 5)("tags" 9)))))

;; Update test_meta for all tests
(define (runs:update-all-test_meta db)
  (let ((test-names (get-all-legal-tests)))
    (for-each 
     (lambda (test-name)
       (let* ((test-path    (conc *toppath* "/tests/" test-name))
	      (test-configf (conc test-path "/testconfig"))
	      (testexists   (and (file-exists? test-configf)(file-read-access? test-configf)))
	      ;; read configs with tricks turned off (i.e. no system)
	      (test-conf    (if testexists (read-config test-configf #f #f)(make-hash-table))))
	 ;; use the open-run-close instead of passing in db
	 (runs:update-test_meta test-name test-conf)))
     test-names)))

;; This could probably be refactored into one complex query ...
(define (runs:rollup-run keys runname user keyvals)
  (debug:print 4 "runs:rollup-run, keys: " keys " :runname " runname " user: " user)
  (let* ((db              #f)
	 (new-run-id      (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))
	 (prev-tests      (open-run-close test:get-matching-previous-test-run-records db new-run-id "%" "%"))
	 (curr-tests      (open-run-close db:get-tests-for-run db new-run-id "%/%" '() '()))
	 (curr-tests-hash (make-hash-table)))
    (open-run-close db:update-run-event_time db new-run-id)
    ;; index the already saved tests by testname and itemdat in curr-tests-hash
    (for-each
     (lambda (testdat)

    ;;   2. replace the rollup test with the new *always*
    (for-each 
     (lambda (testdat)
       (let* ((testname  (db:test-get-testname testdat))
	      (item-path (db:test-get-item-path testdat))
	      (full-name (conc testname "/" item-path))
	      (prev-test-dat (hash-table-ref/default curr-tests-hash full-name #f))
	      (test-steps    (open-run-close db:get-steps-for-test db (db:test-get-id testdat)))
	      (new-test-record #f))
	 ;; replace these with insert ... select
	 (apply sqlite3:execute 
		db 
		(conc "INSERT OR REPLACE INTO tests (run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment) "
		      "VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?);")
		new-run-id (cddr (vector->list testdat)))

(include "task_records.scm")

;;======================================================================
;; Tasks db
;;======================================================================

(define (tasks:open-db)
  (let* ((dbpath       (conc *toppath* "/monitor.db"))
	 (exists       (file-exists? dbpath))
	 (write-access (file-write-access? dbpath))
	 (mdb          (sqlite3:open-database dbpath)) ;; (never-give-up-open-db dbpath))
	 (handler      (make-busy-timeout 36000)))
    (if (and exists
	     (not write-access))
	(set! *db-write-access* write-access)) ;; only unset so other db's also can use this control
    (sqlite3:set-busy-handler! mdb handler)
    (sqlite3:execute mdb (conc "PRAGMA synchronous = 0;"))
    (if (not exists)
	(begin
	  (sqlite3:execute mdb "CREATE TABLE IF NOT EXISTS tasks_queue (id INTEGER PRIMARY KEY,
                                action TEXT DEFAULT '',
                                owner TEXT,
                                state TEXT DEFAULT 'new',
                                target TEXT DEFAULT '',

   interface
   port
   pubport
   transport
   ))

;; NB// two servers with same pid on different hosts will be removed from the list if pid: is used!
(define (tasks:server-deregister mdb hostname #!key (port #f)(pid #f)(action 'delete))
  (debug:print-info 11 "server-deregister " hostname ", port " port ", pid " pid)
  (if *db-write-access*
      (if pid
	  (case action
	    ((delete)(sqlite3:execute mdb "DELETE FROM servers WHERE pid=?;" pid))
	    (else    (sqlite3:execute mdb "UPDATE servers SET state='dead' WHERE pid=?;" pid)))
	  (if port
	      (case action
	    ((delete)(sqlite3:execute mdb "DELETE FROM servers WHERE (interface=? or hostname=?) AND port=?;" hostname hostname port))
	    (else    (sqlite3:execute mdb "UPDATE servers SET state='dead' WHERE (interface=? or hostname=?) AND port=?;" hostname hostname port)))
	      (debug:print 0 "ERROR: tasks:server-deregister called with neither pid nor port specified")))))

(define (tasks:server-deregister-self mdb hostname)
  (tasks:server-deregister mdb hostname pid: (current-process-id)))

;; need a simple call for robustly removing records given host and port
(define (tasks:server-delete mdb hostname port)
  (tasks:server-deregister mdb hostname port: port action: 'delete))

       (begin
	 (debug:print 0 "ERROR: tasks:server-get-server-id needs (hostname and pid) OR (iface and port) OR (hostname and port)")
	 "SELECT id FROM servers WHERE pid=-999;")))
     (if hostname hostname iface)(if pid pid port))
    res))

(define (tasks:server-update-heartbeat mdb server-id)
  (debug:print-info 1 "Heart beat update of server id=" server-id)
  (handle-exceptions
   exn
   (begin
     (debug:print 0 "WARNING: probable timeout on monitor.db access")
     (thread-sleep! 1)
     (tasks:server-update-heartbeat mdb server-id))
   (sqlite3:execute mdb "UPDATE servers SET heartbeat=strftime('%s','now') WHERE id=?;" server-id)))

;; alive servers keep the heartbeat field upto date with seconds every 6 or so seconds
(define (tasks:server-alive? mdb server-id #!key (iface #f)(hostname #f)(port #f)(pid #f))
  (let* ((server-id  (if server-id 
			 server-id
			 (tasks:server-get-server-id mdb hostname iface port pid)))
	 (heartbeat-delta 99e9))

			       "  EXCEPTION: " ((condition-property-accessor 'exn 'message) exn))
	     (debug:print 1 "Sending signal/term to " pid " on " hostname)
	     (process-signal pid signal/term)
	     (thread-sleep! 5) ;; give it five seconds to die peacefully then do a brutal kill
	     ;;(process-signal pid signal/kill)
	     ) ;; local machine, send sig term
	    (begin
	      ;;(debug:print-info 1 "Stopping remote servers not yet supported."))))
	      (debug:print-info 1 "Telling alive server on " hostname ":" port " to commit servercide")
	      (let ((serverdat (list hostname port)))
	      	(case (if (string? transport) (string->symbol transport) transport)
	      	  ((http)(http-transport:client-connect hostname port))
	      	  (else  (debug:print "ERROR: remote stopping servers of type " transport " not supported yet")))
	      	(cdb:kill-server serverdat pid)))))    ;; remote machine, try telling server to commit suicide
      (begin
	(if status 
	    (if (equal? hostname (get-host-name))
		(begin
		  (debug:print-info 1 "Sending signal/term to " pid " on " hostname)
		  (process-signal pid signal/term)  ;; local machine, send sig term
		  (thread-sleep! 5)                 ;; give it five seconds to die peacefully then do a brutal kill

		    (tasks:task-get-owner  task)
		    flags)
    (tasks:set-state mdb (tasks:task-get-id task) "waiting")))

(define (tasks:rollup-runs db mdb task)
  (let* ((flags (make-hash-table)) 
	 (keys  (db:get-keys db))
	 (keyvals (keys:target-keyval keys (tasks:task-get-target task))))
    ;; (hash-table-set! flags "-rerun" "NOT_STARTED")
    (print "Starting rollup " task)
    ;; sillyness, just call the damn routine with the task vector and be done with it. FIXME SOMEDAY
    (runs:rollup-run db
		     keys 
		     keyvals
		     (tasks:task-get-name  task)
		     (tasks:task-get-owner  task))
    (tasks:set-state mdb (tasks:task-get-id task) "waiting")))

	   (res      #f))
      ;; (print "tests:glob-like-match => notpatt: " notpatt ", newpatt: " newpatt ", finpatt: " finpatt)
      (set! res (string-match (regexp finpatt (if like #t #f)) str))
      (if notpatt (not res) res))))

;; if itempath is #f then look only at the testname part
;;
(define (tests:match patterns testname itempath #!key (required '()))
  (if (string? patterns)
      (let ((patts (append (string-split patterns ",") required)))
	(if (null? patts) ;;; no pattern(s) means no match
	    #f
	    (let loop ((patt (car patts))
		       (tal  (cdr patts)))
	      ;; (print "loop: patt: " patt ", tal " tal)
	      (if (string=? patt "")
		  #f ;; nothing ever matches empty string - policy

		    (loop (car tal)(cdr tal)(cons qry res)))))))
      #f))

;; get the previous record for when this test was run where all keys match but runname
;; returns #f if no such test found, returns a single test record if found
(define (test:get-previous-test-run-record db run-id test-name item-path)
  (let* ((keys    (cdb:remote-run db:get-keys #f))
	 (selstr  (string-intersperse  keys ","))
	 (qrystr  (string-intersperse (map (lambda (x)(conc x "=?")) keys) " AND "))
	 (keyvals #f))
    ;; first look up the key values from the run selected by run-id
    (sqlite3:for-each-row 
     (lambda (a . b)
       (set! keyvals (cons a b)))
     db
     (conc "SELECT " selstr " FROM runs WHERE id=? ORDER BY event_time DESC;") run-id)

				  (loop (car tal)(cdr tal)))
			      #f))))))
      (pop-directory)
      result)))


;; Do not rpc this one, do the underlying calls!!!
(define (tests:test-set-status! test-id state status comment dat #!key (work-area #f))
  (debug:print-info 4 "tests:test-set-status! test-id=" test-id ", state=" state ", status=" status ", dat=" dat)
  (let* ((db          #f)
	 (real-status status)
	 (otherdat    (if dat dat (make-hash-table)))
	 (testdat     (cdb:get-test-info-by-id *runremote* test-id))
	 (run-id      (db:test-get-run_id testdat))
	 (test-name   (db:test-get-testname   testdat))

    ;; update the primary record IF state AND status are defined
    (if (and state status)
	(cdb:test-set-status-state *runremote* test-id real-status state (if waived waived comment)))
    
    ;; if status is "AUTO" then call rollup (note, this one modifies data in test
    ;; run area, it does remote calls under the hood.
    (if (and test-id state status (equal? status "AUTO")) 
	(db:test-data-rollup #f test-id status work-area: work-area))

    ;; add metadata (need to do this way to avoid SQL injection issues)

    ;; :first_err
    ;; (let ((val (hash-table-ref/default otherdat ":first_err" #f)))
    ;;   (if val
    ;;       (sqlite3:execute db "UPDATE tests SET first_err=? WHERE run_id=? AND testname=? AND item_path=?;" val run-id test-name item-path)))

			   variable ","
			   value    ","
			   expected ","
			   tol      ","
			   units    ","
			   dcomment ",," ;; extra comma for status
			   type     )))
	    ;; This was run remote, don't think that makes sense.
	    (db:csv->test-data #f test-id
				dat))))
      
    ;; need to update the top test record if PASS or FAIL and this is a subtest
    (if (not (equal? item-path ""))
	(cdb:roll-up-pass-fail-counts *runremote* run-id test-name item-path status))

    (if (or (and (string? comment)

	 (lambda (count)
	   (set! res count))
	 tdb
	 "SELECT count(id) FROM test_rundat;")
	res))
  0)

(define (tests:update-central-meta-info test-id cpuload diskfree minutes num-records uname hostname)
  ;; This is a good candidate for threading the requests to enable
  ;; transactionized write at the server
  (cdb:tests-update-cpuload-diskfree *runremote* test-id cpuload diskfree)
  ;; (let ((db (open-db)))
    ;; (sqlite3:execute db "UPDATE tests SET cpuload=?,diskfree=? WHERE id=?;"
    ;;     	     cpuload
    ;;     	     diskfree
    ;;     	     test-id)
    (if minutes 
	(cdb:tests-update-run-duration *runremote* test-id minutes))
	;; (sqlite3:execute db "UPDATE tests SET run_duration=? WHERE id=?;" minutes test-id))
    (if (eq? num-records 0)
	(cdb:tests-update-uname-host *runremote* test-id uname hostname))
	;;(sqlite3:execute db "UPDATE tests SET uname=?,host=? WHERE id=?;" uname hostname test-id))

    ;;(sqlite3:finalize! db))
    )
  
(define (tests:set-meta-info db test-id run-id testname itemdat minutes work-area)
  ;; DOES cdb:remote-run under the hood!
  (let* ((tdb         (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (num-records (test:tdb-get-rundat-count tdb))
	 (cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory))))
    (if (eq? (modulo num-records 10) 0) ;; every ten records update central
	(let ((uname    (get-uname "-srvpio"))
	      (hostname (get-host-name)))
	  (tests:update-central-meta-info test-id cpuload diskfree minutes num-records uname hostname)))
    (sqlite3:execute tdb "INSERT INTO test_rundat (update_time,cpuload,diskfree,run_duration) VALUES (strftime('%s','now'),?,?,?);"
		     cpuload diskfree minutes)
    (sqlite3:finalize! tdb)))
	  
;;======================================================================
;; A R C H I V I N G
;;======================================================================

(define (test:archive db test-id)
  #f)

(define (test:archive-tests db keynames target)
  #f)

	cd fullrun;megatest -runtests %/,%/winter -target ubuntu/nfs/none :runname $(RUNNAME)_03  -debug $(DEBUG)
	sleep 40;cd fullrun;megatest -target ubuntu/nfs/none :runname $(RUNNAME) -set-state-status COMPLETED,FORCED :state COMPLETED :status PASS -testpatt ez_p%s,runfirst/ -debug $(DEBUG) $(LOGGING)


test3 : fullprep
	cd fullrun;$(MEGATEST) -runtests runfirst -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b -debug 10

test4 : cleanprep
	@echo "WARNING: No longer running fullprep, test converage may be lessened"
	cd fullrun;time $(MEGATEST) -debug $(DEBUG) -runtests % -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b -m "This is a comment specific to a run" -v $(LOGGING)

# NOTE: Only one instance can be a server
test5 : cleanprep
	@echo "WARNING: No longer running fullprep, test converage may be lessened"
	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_aa -debug $(DEBUG) $(LOGGING) > aa.log 2> aa.log &
	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ab -debug $(DEBUG) $(LOGGING) > ab.log 2> ab.log &
	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ac -debug $(DEBUG) $(LOGGING) > ac.log 2> ac.log &
	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ad -debug $(DEBUG) $(LOGGING) > ad.log 2> ad.log &	
#	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_ae -debug $(DEBUG) $(LOGGING) > ae.log 2> ae.log &	
#	cd fullrun;sleep 0;$(MEGATEST) -runtests % -target $(TARGET) :runname $(RUNNAME)_af -debug $(DEBUG) $(LOGGING) > af.log 2> af.log &	

test6: fullprep
	cd fullrun;$(MEGATEST) -runtests runfirst -testpatt %/1 -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_itempatt -v
	cd fullrun;$(MEGATEST) -runtests runfirst -testpatt %blahha% -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_itempatt -debug 10
	cd fullrun;$(MEGATEST) -rollup :runname newrun -target ubuntu/nfs/none -debug 10


cleanprep : ../*.scm Makefile */*.config
	mkdir -p fullrun/tmp/mt_runs fullrun/tmp/mt_links
	cd ..;make;make install
	rm -f */logging.db
	touch cleanprep

fullprep : cleanprep
	cd fullrun;$(MEGATEST) -remove-runs :runname $(RUNNAME)% -target %/%/% -testpatt %/%
	cd fullrun;$(BINPATH)/dashboard -rows 15 &

BINDIR=$(PWD)/../../../bin
MEGATEST=$(BINDIR)/megatest
DASHBOARD=$(BINDIR)/dashboard
all :
	$(MEGATEST) -runtests % -target a/b :runname c

bigbig :
	for tn in a b c d;do \
	   ($(MEGATEST) -runtests % -target a/b :runname $tn & ) ; \
	done

bigrun :
	$(MEGATEST) -runtests bigrun -target a/bigrun :runname a

bigrun2 :
	$(MEGATEST) -runtests bigrun2 -target a/bigrun2 :runname a

dashboard : 
	$(DASHBOARD) -rows 20 &

compile :
	(cd ../../..;make && make install)

clean :
	rm -rf ../simple*/*/* megatest.db

[setup]
testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log
runqueue 2

[include ../fdk.config]

[server]
timeout 0.01

#!/bin/bash

(cd ../../..;make && make install) || exit 1
export PATH=$PWD/../../../bin:$PATH

for i in a b c d e f;do
  # g h i j k l m n o p q r s t u v w x y z;do
  megatest -runtests % -target a/b :runname $i &
done

echo "" > num-running.log
while true; do
  foo=`megatest -list-runs % | grep RUNNING | wc -l`
  echo "Num running at `date` $foo"
  echo "$foo at `date`" >> num-running.log
  # to make the test go at a reasonable clip only gather this info ever minute
  sleep 1m
done

#!/bin/sh
if [ $NUMBER -lt 200 ];then 
   sleep $NUMBER
else
   sleep 200
fi

exit 0

# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh

# Test requirements are specified here
[requirements]
# waiton setup
priority 0

# Iteration for your tests are controlled by the items section
[items]
NUMBER #{scheme (string-intersperse (map number->string (sort (let loop ((a 0)(res '()))(if (< a (or (any->number (get-environment-variable "NUMTESTS")) 1100))(loop (+ a 1)(cons a res)) res)) >)) " ")}

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo

#!/bin/sh
# prev_test=`$MT_MEGATEST -test-paths -target $MT_TARGET :runname $MT_RUNNAME -testpatt bigrun/$NUMBER`
# if [ -e $prev_test/testconfig ]; then
#   exit 0
# else
#   exit 1
# fi

exit 0

# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh

# Test requirements are specified here
[requirements]
# waiton bigrun
priority 0
mode itemmatch


# Iteration for your tests are controlled by the items section
[items]
NUMBER #{scheme (string-intersperse (map number->string (sort (let loop ((a 0)(res '()))(if (< a 1500)(loop (+ a 1)(cons a res)) res)) >)) " ")}

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo

TESTSTORUN priority_6 sqlitespeed/ag

[setup]
# exectutable /path/to/megatest
max_concurrent_jobs 150

linktree #{getenv MT_RUN_AREA_HOME}/tmp/mt_links

[jobtools]
useshell yes
# ## launcher launches jobs, the job is managed on the target host
## by megatest, comment out launcher to run local

[fields]
sysname TEXT
fsname TEXT
datapath TEXT

# refareas can be searched to find previous runs
# the path points to where megatest.db exists
[refareas]
area1 /tmp/oldarea/megatest

[include config/mt_include_1.config]

[setup]
# Set launchwait to yes to use the old launch run code that waits for the launch process to return before 
# proceeding.
# launchwait yes

# If defined the runs:run-tests-queue-new queue code is used with the register test depth
# given. Otherwise the old code is used. The old code will be removed in the future and 
# a default of 10 used.
# runqueue 2

# It is possible (but not recommended) to override the rsync command used
# to populate the test directories. For test development the following 
# example can be useful
#
# testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log

# or for hard links

# testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/.

# FULL or 2, NORMAL or 1, OFF or 0
synchronous OFF

WACKYVAR4 #{scheme (+ 5 6 7)}
WACKYVAR5 #{getenv sysname}/#{getenv fsname}/#{getenv datapath}
WACKYVAR6 #{scheme (args:get-arg "-target")}
PREDICTABLE the_ans
MRAH MT_RUN_AREA_HOME=#{getenv MT_RUN_AREA_HOME}
# The empty var should have a definition with null string
EMPTY_VAR

WRAPPEDVAR This var should have the work blah thrice: \
blah \
blah

# XTERM   [system xterm]
# RUNDEAD [system exit 56]

[server]

# If the server can't be started on this port it will try the next port until
# it succeeds
port 8080

# This server will keep running this number of hours after last access. 
# Three minutes is 0.05 hours
timeout 0.025

## disks are:
## name host:/path/to/area
## -or-
## name /path/to/area
[disks]
disk0 /foobarbazz
[include config/mt_include_2.config]

[include #{getenv USER}_testing.config]

TESTSTORUN priority_4 test_mt_vars

[default]
SOMEVAR This should show up in SOMEVAR3

# target based getting of config file, look at afs.config and nfs.config
[include #{getenv fsname}.config]

[include #{getenv MT_RUN_AREA_HOME}/common_runconfigs.config]

# #{system echo 'VACKYVAR #{shell pwd}' > $MT_RUN_AREA_HOME/config/$USER.config}
[include ./config/#{getenv USER}.config]


WACKYVAR0 #{get ubuntu/nfs/none CURRENT}
WACKYVAR1 #{scheme (args:get-arg "-target")}

[default/ubuntu/nfs]
WACKYVAR2 #{runconfigs-get CURRENT}

[ubuntu/nfs/none]
WACKYVAR2 #{runconfigs-get CURRENT}
SOMEVAR2  This should show up in SOMEVAR4 if the target is ubuntu/nfs/none

[default]
SOMEVAR3 #{rget SOMEVAR}
SOMEVAR4 #{rget SOMEVAR2}
SOMEVAR5 #{runconfigs-get SOMEVAR2}

[ezsteps]
# calcresults megatest -list-runs $MT_RUNNAME -target $MT_TARGET

[requirements]
waiton #{rget TESTSTORUN}

# This is a "toplevel" test, it does not require waitons to be non-FAIL to run
mode toplevel

;; S E R V E R
;;======================================================================

(test "setup for run" #t (begin (setup-for-run)
				(string? (getenv "MT_RUN_AREA_HOME"))))

(test "server-register, get-best-server" #t (let ((res #f))
					      (open-run-close tasks:server-register tasks:open-db 1 "bob" 1234 100 'live 'http)
					      (set! res (open-run-close tasks:get-best-server tasks:open-db))
					      (number? (vector-ref res 3))))

(test "de-register server" #f (let ((res #f))
				(open-run-close tasks:server-deregister tasks:open-db "bob" port: 1234)
				(open-run-close tasks:get-best-server tasks:open-db)))

(define server-pid #f)
(test "launch server" #t (let ((pid (process-fork (lambda ()
						    ;; (daemon:ize)
						    (server:launch 'http)))))
			   (set! server-pid pid)
			   (number? pid)))

(thread-sleep! 3) ;; need to wait for server to start. Yes, a better way is needed.
(test "get-best-server" #t (let ((dat (open-run-close tasks:get-best-server tasks:open-db)))
			     (set! *runremote* (list (vector-ref dat 1)(vector-ref dat 2))) ;; host ip pullport pubport
			     (and (string? (car  *runremote*))
			     	  (number? (cadr *runremote*)))))








(test #f #t (car (cdb:login *runremote* *toppath* *my-client-signature*)))
(test #f #t (let ((res (client:login *runremote*)))
	      (car res)))



;;======================================================================
;; C O N F I G   F I L E S 
;;======================================================================

(define conffile #f)
(test "Read a config" #t (hash-table? (read-config "test.config" #f #f)))

(test #f #f (cdb:roll-up-pass-fail-counts *runremote* 1 "test1" "" "PASS"))
;; (set! *verbosity* 1)
;; (cdb:set-verbosity *runremote* *verbosity*)

(test "get all legal tests" (list "test1" "test2") (sort (get-all-legal-tests) string<=?))


(test "get-keys" "SYSTEM" (car (db:get-keys *db*)))

(define remargs (args:get-args
		 '("bar" "foo" ":runname" "bob" ":SYSTEM" "ubuntu" ":RELEASE" "v1.2" ":datapath" "blah/foo" "nada")
		 (list ":runname" ":state" ":status")
		 (list "-h")
		 args:arg-hash
		 0))

(test "register-run" #t (number?
			 (db:register-run *db*
					  '(("SYSTEM" "key1")("RELEASE" "key2"))
					  "myrun" 
					  "new"
					  "n/a" 
					  "bob")))

(test #f #t             (cdb:tests-register-test *runremote* 1 "nada" ""))
(test #f 1              (cdb:remote-run db:get-test-id #f 1 "nada" ""))
(test #f "NOT_STARTED"  (vector-ref (open-run-close db:get-test-info #f 1 "nada" "") 3))
(test #f "NOT_STARTED"  (vector-ref (cdb:get-test-info *runremote* 1 "nada" "") 3))

(define keys (db:get-keys *db*))

;;======================================================================
;; D B
;;======================================================================

(test #f "FOO LIKE 'abc%def'" (db:patt->like "FOO" "abc%def"))
(test #f "key2" (vector-ref (car (vector-ref (runs:get-runs-by-patt *db* '("SYSTEM" "RELEASE") "%" "key1/key2") 1)) 1))

(test #f "SYSTEM,RELEASE,id,runname,state,status,owner,event_time" (car (runs:get-std-run-fields keys '("id" "runname" "state" "status" "owner" "event_time"))))
(test #f #t (runs:operate-on 'print "%" "%" "%"))

;;(test "update-test-info" #t (test-update-meta-info *db* 1 "nada" 
(setenv "BLAHFOO" "1234")
(unsetenv "NADAFOO")
(test "env temp overrides" "xyz" (let ((prevvals (alist->env-vars '(("BLAHFOO" 4321)("NADAFOO" xyz))))

; (hash-table-set! args:arg-hash "-keepgoing" #t)
(hash-table-set! args:arg-hash "-itempatt" "%")
(hash-table-set! args:arg-hash "-testpatt" "%")
(hash-table-set! args:arg-hash "-target" "ubuntu/r1.2")
(test "Setup for a run"       #t (begin (setup-for-run) #t))

(define *tdb* #f)
(define keyvals #f)
(test "target->keyval" #t (let ((kv (keys:target->keyval keys (args:get-arg "-target"))))
			    (set! keyvals kv)(list? keyvals)))

(define testdbpath (conc "/tmp/" (getenv "USER") "/megatest_testing"))
(system (conc "rm -f " testdbpath "/testdat.db;mkdir -p " testdbpath))

(print "Using " testdbpath " for test db")
(test #f #t (let ((db (open-test-db testdbpath)))
	      (set! *tdb* db)
	      (sqlite3#database? db)))
(sqlite3#finalize! *tdb*)

;; (test "Remove the rollup run" #t (begin (remove-runs) #t))
(define tconfig #f)
(test "get a testconfig" #t (let ((tconf (tests:get-testconfig "test1" 'return-procs)))
			      (set! tconfig tconf)
			      (hash-table? tconf)))
(db:clean-all-caches)

(test "set-megatest-env-vars"
      "ubuntu"
      (begin
	(set-megatest-env-vars 1 inkeys: keys)
	(get-environment-variable "SYSTEM")))
(test "setup-env-defaults"
      "see this variable"
      (begin
	(setup-env-defaults "runconfigs.config" 1 *already-seen-runconfig-info* keys keyvals "pre-launch-env-vars")
	(get-environment-variable "ALLTESTS")))

(test #f "ubuntu" (car (keys:target-set-args keys (args:get-arg "-target") args:arg-hash)))

(define rinfo #f)
(test "get-run-info"  #f (vector? (vector-ref (let ((rinf (cdb:remote-run db:get-run-info #f 1)))
						(set! rinfo rinf)
						rinf) 0)))
(test "get-key-vals"  "key1" (car (cdb:remote-run db:get-key-vals #f 1)))
(test "tests:sort-by" '() (tests:sort-by-priority-and-waiton (make-hash-table)))

(test "update-test_meta" "test1" (begin
				   (runs:update-test_meta "test1" tconfig)
				   (let ((dat (cdb:remote-run db:testmeta-get-record #f "test1")))
				     (vector-ref dat 1))))

(define test-path "tests/test1")
(define disk-path #f)
(test "get-best-disk"    #t (string? (file-exists? (let ((d (get-best-disk *configdat*)))
						     (set! disk-path d)
						     d))))
(test "create-work-area" #t (symbolic-link? (car (create-work-area 1 rinfo keyvals 1 test-path disk-path "test1" '()))))
(test #f "" (item-list->path '()))

(test "launch-test" #t (string? (file-exists? (launch-test 1 1 rinfo keyvals "run1" tconfig "test1" test-path '() (make-hash-table)))))


(test "Run a test" #t (general-run-call 
		       "-runtests" 
		       "run a test"
		       (lambda (target runname keys keyvallst)
			 (let ((test-patts "test%"))
			   ;; (runs:run-tests target runname test-patts user (make-hash-table))
			   ;; (run:test run-id run-info key-vals runname test-record flags parent-test)
			   ;; (set! *verbosity* 22) ;; (list 0 1 2))
			   (run:test 1 ;; run-id

				     #f        ;; run-info is yet only a dream
				     keyvallst ;; (keys:target->keyval keys target)
				     "run1"    ;; runname 
				     (vector            ;; test_records.scm tests:testqueue
				      "test1"           ;; testname
				      tconfig           ;; testconfig
				      '()               ;; waitons
				      0                 ;; priority
				      #f                ;; items
				      #f                ;; itemsdat
				      ""                ;; itempath
				      )
				     args:arg-hash      ;; flags (e.g. -itemspatt)
				     #f)
			   ;; (set! *verbosity* 0)
			   ))))





(test "server stop" #f (let ((hostname (car  *runremote*))
			     (port     (cadr *runremote*)))
			 (tasks:kill-server #t hostname port server-pid 'http)
			 (open-run-close tasks:get-best-server tasks:open-db)))

(exit 1)
;; (test "cache is coherent" #t (let ((cached-info (db:get-test-info-cached-by-id db 2))
;; 				   (non-cached  (db:get-test-info-not-cached-by-id db 2)))
;; 			       (print "\nCached:    " cached-info)
;; 			       (print "Noncached: " non-cached)
;; 			       (equal? cached-info non-cached)))

(change-directory test-work-dir)
(test "Add a step"  #t
      (begin
	(db:teststep-set-status! db 2 "step1" "start" 0 "This is a comment" "mylogfile.html")
	(sleep 2)
	(db:teststep-set-status! db 2 "step1" "end" "pass" "This is a different comment" "finallogfile.html")

			       #t))

(hash-table-set! args:arg-hash ":runname" "%")

(test "Remove the rollup run" #t (begin (operate-on 'remove-runs)))

(print "Waiting for server to be done, should be about 20 seconds")
(test "server stop" #f (let ((hostname (car  *runremote*))
			     (port     (cadr *runremote*)))
			 (tasks:kill-server #t hostname port server-pid 'http)
			 (open-run-close tasks:get-best-server tasks:open-db)))

;; (cdb:kill-server *runremote*)

;; (thread-join! th1 th2 th3)

;; ADD ME!!!! (db:get-prereqs-not-met *db* 1 '("runfirst") "" mode: 'normal)
;; ADD ME!!!! (rdb:get-tests-for-run *db* 1 "runfirst" #f '() '())