Megatest

;; Move me elsewhere ...
;; RADT => Why do we meed the version check here, this is called only if version misma
;;
(define (common:cleanup-db dbstruct)
  (db:multi-db-sync 
   dbstruct
   'schema
   ;; 'new2old
   'killservers
   'dejunk
   'adj-target
   ;; 'old2new
   'new2old

   )
  (if (common:version-changed?)
      (common:set-last-run-version)))

;; Rotate logs, logic: 
;;                 if > 500k and older than 1 week:
;;                     remove previous compressed log and compress this log
;; WARNING: This proc operates assuming that it is in the directory above the

;;
(define (common:exit-on-version-changed)
  (if (common:on-homehost?)
      (if (common:version-changed?)
	  (let* ((mtconf (conc (get-environment-variable "MT_RUN_AREA_HOME") "/megatest.config"))
                (dbfile (conc (get-environment-variable "MT_RUN_AREA_HOME") "/megatest.db"))
                (read-only (not (file-write-access? dbfile)))
                (dbstruct (db:setup #t)))
	    (debug:print 0 *default-log-port*
			 "WARNING: Version mismatch!\n"
			 "   expected: " (common:version-signature) "\n"
			 "   got:      " (common:get-last-run-version))
            (cond
             ((get-environment-variable "MT_SKIP_DB_MIGRATE") #t)
             ((and (file-exists? mtconf) (file-exists? dbfile) (not read-only)

	    (if (common:low-noise-print 30)
		(debug:print-info 0 *default-log-port* "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*" pid="(current-process-id)" this-wd-num="this-wd-num)))))))

;; TODO: for multiple areas, we will have multiple watchdogs; and multiple threads to manage
(define (common:watchdog)
  (debug:print-info 13 *default-log-port* "common:watchdog entered.")
  (if (common:on-homehost?)
      (let ((dbstruct (db:setup #t)))
	(debug:print-info 13 *default-log-port* "after db:setup with dbstruct="dbstruct)
	(cond
	 ((dbr:dbstruct-read-only dbstruct)
	  (debug:print-info 13 *default-log-port* "loading read-only watchdog")
	  (common:readonly-watchdog dbstruct))
	 (else
	  (debug:print-info 13 *default-log-port* "loading writable-watchdog.")

;;     (dbr:dbstruct-olddb-set!  dbstruct olddb)
;;     ;;; (mutex-unlock! *rundb-mutex*) ;;; why did we need a mutex on opening db's?
;;     (db:sync-tables db:sync-tests-only *megatest-db* db)
;;     db))

;; This routine creates the db if not already present. It is only called if the db is not already opened
;;
(define (db:open-db dbstruct #!key (areapath #f)(do-sync #t)) ;; TODO: actually use areapath
  (let ((tmpdb-stack (dbr:dbstruct-dbstack dbstruct))) ;; RA => Returns the first reference in dbstruct
    (if (stack? tmpdb-stack)
	(db:get-db tmpdb-stack) ;; get previously opened db (will create new db handle if all in the stack are already used
        (let* ((dbpath       (db:dbfile-path ))      ;; path to tmp db area
               (dbexists     (file-exists? dbpath))
	       (tmpdbfname   (conc dbpath "/megatest.db"))
	       (dbfexists    (file-exists? tmpdbfname))  ;; (conc dbpath "/megatest.db")))

                (dbr:dbstruct-read-only-set! dbstruct #t)))
          (dbr:dbstruct-mtdb-set!   dbstruct mtdb)
          (dbr:dbstruct-tmpdb-set!  dbstruct tmpdb)
          (dbr:dbstruct-dbstack-set! dbstruct (make-stack)) ;; BB: why a stack?  Why would the number of db's be indeterminate?  Is this a legacy of 1.db 2.db .. ?
          (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb) ;; olddb is already a (cons db path)
          (dbr:dbstruct-refndb-set! dbstruct refndb)
          ;;	    (mutex-unlock! *rundb-mutex*)
          (if (and  (or (not dbfexists)
			(and modtimedelta
			     (> modtimedelta 10))) ;; if db in tmp is over ten seconds older than the file in MTRA then do a sync back
		    do-sync)
	      (begin
		(debug:print 4 *default-log-port* "filling db " (db:dbdat-get-path tmpdb) " with data \n    from " (db:dbdat-get-path mtdb) " mod time delta: " modtimedelta)
		(db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb refndb tmpdb)
                (debug:print-info 13 *default-log-port* "db:sync-all-tables-list done.")
                )
	      (debug:print 4 *default-log-port* " db, " (db:dbdat-get-path tmpdb) " already exists or fresh enough, not propogating data from\n     " (db:dbdat-get-path mtdb) " mod time delta: " modtimedelta) )
	  ;; (db:multi-db-sync dbstruct 'old2new))  ;; migrate data from megatest.db automatically
          tmpdb))))

;; Make the dbstruct, setup up auxillary db's and call for main db at least once
;;
;; called in http-transport and replicated in rmt.scm for *local* access. 
;;
(define (db:setup do-sync #!key (areapath #f))
  ;;

  (cond
   (*dbstruct-db* *dbstruct-db*);; TODO: when multiple areas are supported, this optimization will be a hazard
   (else ;;(common:on-homehost?)
    (debug:print-info 13 *default-log-port* "db:setup entered (first time, not cached.)")
    (let* ((dbstruct (make-dbr:dbstruct)))
      (when (not *toppath*)
        (debug:print-info 13 *default-log-port* "in db:setup, *toppath* not set; calling launch:setup")
        (launch:setup areapath: areapath))
      (debug:print-info 13 *default-log-port* "Begin db:open-db")
      (db:open-db dbstruct areapath: areapath do-sync: do-sync)
      (debug:print-info 13 *default-log-port* "Done db:open-db")
      (set! *dbstruct-db* dbstruct)
      ;;(debug:print-info 13 *default-log-port* "new dbstruct = "(dbr:dbstruct->alist dbstruct))
      dbstruct))))
   ;; (else
   ;;  (debug:print 0 *default-log-port* "ERROR: attempt to open database when not on homehost. Exiting. Homehost: " (common:get-homehost))
   ;;  (exit 1))))

	       (server-state 'available)
	       (bad-sync-count 0)
	       (start-time     (current-milliseconds)))
      ;; Use this opportunity to sync the tmp db to megatest.db
      (if (not server-going) ;; *dbstruct-db* 
	  (begin
	    (debug:print 0 *default-log-port* "SERVER: dbprep")
	    (set! *dbstruct-db*  (db:setup #t)) ;;  run-id))
	    (set! server-going #t)
	    (debug:print 0 *default-log-port* "SERVER: running, megatest version: " (common:get-full-version)) ;; NOTE: the server is NOT yet marked as running in the log. We do that in the keep-running routine.
	    (thread-start! *watchdog*)))
      
      ;; when things go wrong we don't want to be doing the various queries too often
      ;; so we strive to run this stuff only every four seconds or so.
      (let* ((sync-time (- (current-milliseconds) start-time))

         "-server"
         "-list-disks"
         "-list-targets"
         "-show-runconfig"
         ;;"-list-db-targets"
         "-show-runconfig"
         "-show-config"
         "-show-cmdinfo"
	 "-cleanup-db"))
       (no-watchdog-args-vals (filter (lambda (x) x)
                                      (map args:get-arg no-watchdog-args)))
       (start-watchdog (null? no-watchdog-args-vals)))
  ;;(BB> "no-watchdog-args="no-watchdog-args "no-watchdog-args-vals="no-watchdog-args-vals) 
  (if start-watchdog
      (thread-start! *watchdog*)))

(if (args:get-arg "-cleanup-db")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 *default-log-port* "Failed to setup, exiting") 
	    (exit 1)))
      (let ((dbstruct (db:setup #f areapath: *toppath*)))
        (common:cleanup-db dbstruct))
      (set! *didsomething* #t)))

(if (args:get-arg "-mark-incompletes")
    (begin
      (if (not (launch:setup))
	  (begin

(if (or (getenv "MT_RUNSCRIPT")
	(args:get-arg "-repl")
	(args:get-arg "-load"))
    (let* ((toppath (launch:setup))
	   (dbstruct (if (and toppath
                              (common:on-homehost?))
                         (db:setup #t)
                         #f))) ;; make-dbr:dbstruct path: toppath local: (args:get-arg "-local")) #f)))
      (if *toppath*
	  (cond
	   ((getenv "MT_RUNSCRIPT")
	    ;; How to run megatest scripts
	    ;;
	    ;; #!/bin/bash

;; ;; ;; redo me        (db:close-all dbstruct)
;; ;; ;; redo me        (list "uname" "rundir" "final_logf" "comment"))
;; ;; ;; redo me       (set! *didsomething* #t)))

(if (args:get-arg "-import-megatest.db")
    (begin
      (db:multi-db-sync 
       (db:setup #f)
       'killservers
       'dejunk
       'adj-testids
       'old2new
       ;; 'new2old
       )
      (set! *didsomething* #t)))

(if (args:get-arg "-sync-to-megatest.db")
    (begin
      (db:multi-db-sync 
       (db:setup #f)
       'new2old
       )
      (set! *didsomething* #t)))

(if (args:get-arg "-sync-to")
    (let ((toppath (launch:setup)))
      (tasks:sync-to-postgres *configdat* (args:get-arg "-sync-to"))

			     (loop (car tal)(cdr tal) newmax-cmd currmax)))))))
    (mutex-unlock! *db-stats-mutex*)
    res))

(define (rmt:open-qry-close-locally cmd run-id params #!key (remretries 5))
  (let* ((qry-is-write   (not (member cmd api:read-only-queries)))
	 (db-file-path   (db:dbfile-path)) ;;  0))
	 (dbstruct-local (db:setup #t))  ;; make-dbr:dbstruct path:  dbdir local: #t)))
	 (read-only      (not (file-write-access? db-file-path)))
	 (start          (current-milliseconds))
	 (resdat         (if (not (and read-only qry-is-write))
			     (let ((v (api:execute-requests dbstruct-local (vector (symbol->string cmd) params))))
			       (handle-exceptions ;; there has been a long history of receiving strange errors from values returned by the client when things go wrong..
				exn               ;;  This is an attempt to detect that situation and recover gracefully
				(begin