Megatest

(define (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs)

  ;; Take advantage of a good place to exit if running the one-pass methodology
  (if (and (> (runs:dat-can-run-more-tests-count runsdat) 20)
	   (args:get-arg "-one-pass"))
      (exit 0))

  (thread-sleep! (cond
        	  ((> (runs:dat-can-run-more-tests-count runsdat) 20)
		   (if (runs:lownoise "waiting on tasks" 60)(debug:print-info 2 *default-log-port* "waiting for tasks to complete, sleeping briefly ..."))
                   (configf:lookup-number *configdat* "setup" "inter-test-delay" default: 0.1) ;; was 2
                   );; obviously haven't had any work to do for a while
        	  (else 0)))
  
  (let* ((num-running             (rmt:get-count-tests-running run-id))

  (list (runs:queue-next-hed tal reg reglen regfull)      ;; hed
        (runs:queue-next-tal tal reg reglen regfull)      ;; tal
        (runs:queue-next-reg tal reg reglen regfull)      ;; reg
        reruns))                                          ;; reruns

(define runs:nothing-left-in-queue-count 0)


;; check if all remaining tests in test queue:
;;   1) have unexpanded tests
;;   2) are NOT STARTED
;;   3) are itemized
;; indicating run cannot proceed.
;; (define (runs:check-for-itemized-stalemate run-id test-queue test-records)
;;   (let loop ((test-queue-left test-queue))
;;     (if (null? test-queue)
;;         #t
;;         (let* ((hed (car test-queue-left))
;;                (tal (cdr test-queue-left))
;;                (test-record (hash-table-ref test-records hed))
;;                (tconfig     (tests:testqueue-get-testconfig test-record))
;;                (items       (tests:testqueue-get-items      test-record))
;;                (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))
;;                               (if m (map string->symbol (string-split m)) '(normal))))
;;                (num-running (num-running  (rmt:get-count-tests-running-for-run-id run-id)))
;;                (is-itemized (not (null? (lset-intersection mode '(itemwait itemmatch toplevel)))))
;;                )
;;           (cond
;;            ((> num-running 0) #f)               ;; stuff is still in flight
;;            ((not is-itemized) #f)               ;; not an itemized test
;;            ((> (irregex-split "/" hed ) 1) #f)  ;; this is an item of an itemized test.
;;            ((not (or (procedure? items)(eq? items 'have-procedure))) #f) ;; items have been expanded
;;            ((not (equal? status ...)))
;;            ((not (tests are running or queued...)))
;;            (else (loop tal)))))))





;; BB: for future reference - suspect target vars are not expanded to env vars at this point (item expansion using [items]\nwhatever [system echo $TARGETVAR] doesnt work right whereas [system echo #{targetvar}] does.. Tal and Randy have tix on this.  on first pass, var not set, on second pass, ok.  
(define (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmaps)
  (let* ((loop-list       (list hed tal reg reruns))
	 (prereqs-not-met (let ((res (rmt:get-prereqs-not-met run-id waitons hed item-path mode: testmode itemmaps: itemmaps)))
			    (if (list? res)
				res
				(begin
				  (debug:print 0 *default-log-port*

   (cond
     ;; all prereqs met, fire off the test
     ;; or, if it is a 'toplevel test and all prereqs not met are COMPLETED then launch

    ((and (not (member 'toplevel testmode))
	   (member (hash-table-ref/default test-registry (db:test-make-full-name hed item-path) 'n/a)
		   '(DONOTRUN removed CANNOTRUN))) ;; *common:cant-run-states-sym*) ;; '(COMPLETED KILLED WAIVED UNKNOWN INCOMPLETE)) ;; try to catch repeat processing of COMPLETED tests here
      (BB> "ei-1")
      (debug:print-info 1 *default-log-port* "Test " hed " set to \"" (hash-table-ref test-registry (db:test-make-full-name hed item-path)) "\". Removing it from the queue")
      (if (or (not (null? tal))
	      (not (null? reg)))
          (runs:loop-values tal reg reglen regfull reruns)
	  (begin
	    (debug:print-info 0 *default-log-port* "Nothing left in the queue!")
	    ;; If get here twice then we know we've tried to expand all items
	    ;; since there must be a logic issue with the handling of loops in the 
	    ;; items expand phase we will brute force an exit here.
	    (if (> runs:nothing-left-in-queue-count 2)
		(begin
		  (debug:print 0 *default-log-port* "WARNING: this condition is triggered when there were no items to expand and nothing to run. Please check your run for completeness")
		  (exit 0))
		(set! runs:nothing-left-in-queue-count (+ runs:nothing-left-in-queue-count 1)))
	    #f)))

     ;; 
    ((or (null? prereqs-not-met)
	  (and (member 'toplevel testmode)
	       (null? non-completed)))
      (BB> "ei-2")
      (debug:print-info 4 *default-log-port* "runs:expand-items: (or (null? prereqs-not-met) (and (member 'toplevel testmode)(null? non-completed)))")
      (let ((test-name (tests:testqueue-get-testname test-record)))
	(setenv "MT_TEST_NAME" test-name) ;; 
	(setenv "MT_RUNNAME"   runname)
	(runs:set-megatest-env-vars run-id inrunname: runname) ;; these may be needed by the launching process
	(let ((items-list (items:get-items-from-config tconfig)))
	  (if (list? items-list)

	      (begin
		(debug:print-error 0 *default-log-port* "The proc from reading the items table did not yield a list - please report this")
		(exit 1))))))

    ((and (null? fails)
	   (null? prereq-fails)
	   (not (null? non-completed)))
      (BB> "ei-3")
      (let* ((allinqueue (map (lambda (x)(if (string? x) x (db:test-get-testname x)))
        		      (append newtal reruns)))
	     ;; prereqstrs is a list of test names as strings that are prereqs for hed
             (prereqstrs (delete-duplicates (map (lambda (x)(if (string? x) x (db:test-get-testname x)))
						 prereqs-not-met)))
	     ;; a prereq that is not found in allinqueue will be put in the notinqueue list
	     ;; 

                  (runs:loop-values trimmed-tal trimmed-reg reglen regfull reruns)
                  ))
	      (list (car newtal)(append (cdr newtal) reg) '() reruns))))

    ((and (null? fails) ;; have not-started tests, but unable to run them.  everything looks completed with no prospect of unsticking something that is stuck.  we should mark hed as moribund and exit or continue if there are more tests to consider
	   (null? prereq-fails)
	   (null? non-completed))
     (BB> "ei-4")
      (if  (runs:can-keep-running? hed 20)
	  (begin
	    (runs:inc-cant-run-tests hed)
	    (debug:print-info 0 *default-log-port* "no fails in prerequisites for " hed " but also none running, keeping " hed " for now. Try count: " (hash-table-ref/default *seen-cant-run-tests* hed 0)) ;; 
	    ;; getting here likely means the system is way overloaded, kill a full minute before continuing
	    (thread-sleep! 60) ;; TODO: gate by normalized server load > 1.0 (maxload config thing)
	    ;; num-retries code was here
	    ;; we use this opportunity to move contents of reg to tal
	    (list (car newtal)(append (cdr newtal) reg) '() reruns)) ;; an issue with prereqs not yet met?
	  (begin
	    (debug:print-info 1 *default-log-port* "no fails in prerequisites for " hed " but nothing seen running in a while, dropping test " hed " from the run queue")
	    (let ((test-id (rmt:get-test-id run-id hed "")))
	      (if test-id (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "TIMED_OUT" "Nothing seen running in a while.")))
            (runs:loop-values tal reg reglen regfull reruns)
            )))

    ((and 
       (or (not (null? fails))
	   (not (null? prereq-fails)))
       (member 'normal testmode))
      (BB> "ei-5")
      (debug:print-info 1 *default-log-port* "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
			(string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
			", removing it from to-do list")
      (let ((test-id (rmt:get-test-id run-id hed "")))
	(if test-id
	    (if (not (null? prereq-fails))
		(mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_DISCARDED" "Failed to run due to prior failed prerequisites")
                (begin
                  (debug:print 4 *default-log-port*"BB> set PREQ_FAIL on "hed)
                  (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_FAIL"      "Failed to run due to failed prerequisites"))))) ;; BB: this works, btu equivalent for itemwait mode does not work.
      (if (or (not (null? reg))(not (null? tal)))
	  (begin
	    (hash-table-set! test-registry hed 'CANNOTRUN)
            (runs:loop-values tal reg reglen regfull (cons hed reruns))
            )
	  #f)) ;; #f flags do not loop

     ((and (not (null? fails))(member 'toplevel testmode))
      (BB> "ei-6")
      (if (or (not (null? reg))(not (null? tal)))
	   (list (car newtal)(append (cdr newtal) reg) '() reruns)
	  #f)) 
     ((null? runnables)
      (BB> "ei-7")
      #f) ;; if we get here and non-completed is null then it is all over.
     (else
      (BB> "ei-8")
      (debug:print 0 *default-log-port* "WARNING: FAILS or incomplete tests maybe preventing completion of this run. Watch for issues with test " hed ", continuing for now")
      (list (car newtal)(cdr newtal) reg reruns)))))

(define (runs:mixed-list-testname-and-testrec->list-of-strings inlst)
  (if (null? inlst)
      '()
      (map (lambda (t)

  (debug:print 5 *default-log-port* "test-records: " test-records ", flags: " (hash-table->alist flags))

  ;; Do mark-and-find clean up of db before starting runing of quue
  ;;
  ;; (rmt:find-and-mark-incomplete)

  (let* ((run-info              (rmt:get-run-info run-id))
         (canary                'CANARY) ;; consider replacing by gensym
         (tests-info            (mt:get-tests-for-run run-id #f '() '())) ;;  qryvals: "id,testname,item_path"))
         (sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
         (test-registry         (make-hash-table))
         (registry-mutex        (make-mutex))
         (num-retries           0)
         (max-retries           (config-lookup *configdat* "setup" "maxretries"))
         (max-concurrent-jobs   (configf:lookup-number *configdat* "setup" "max_concurrent_jobs" default: 50))

		      (st (db:test-get-state     trec)))
		  (if (not (equal? st "DELETED"))
		      (hash-table-set! test-registry (db:test-make-full-name tn ip) (string->symbol st)))))
	      tests-info)
    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))

    (let loop ((hed         (car sorted-test-names))
	       ;;(tal         (append (cdr sorted-test-names) (list canary)))
               (tal         (cdr sorted-test-names))
	       (reg         '()) ;; registered, put these at the head of tal 
	       (reruns      '()))

      
      
      (runs:incremental-print-results run-id)

      ;;
      (if (> (current-seconds)(+ last-time-incomplete 900))
          (begin
            (set! last-time-incomplete (current-seconds))
            ;; (rmt:find-and-mark-incomplete-all-runs)
	    ))

;;      (if (equal? hed canary)
;;          (cond
;;           (null?
      
      ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
      (let* ((test-record (hash-table-ref test-records hed))
	     (test-name   (tests:testqueue-get-testname test-record))
	     (tconfig     (tests:testqueue-get-testconfig test-record))
	     (jobgroup    (config-lookup tconfig "test_meta" "jobgroup"))
	     (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))
			    (if m (map string->symbol (string-split m)) '(normal))))

			    number?
			    (map (lambda (waiton)
				   (if (and (not (member waiton tal))            ;; this waiton is not in the list to be tried to run
					    (not (member waiton reruns)))
				       1
				       #f))
				 waitons))))) ;; could do this more elegantly with a marker....
          (BB> "rtq-1")
	  (debug:print 0 *default-log-port* "WARNING: Marking test " tfullname " as not runnable. It is waiting on tests that cannot be run. Giving up now.")
	  (hash-table-set! test-registry tfullname 'removed))

	 ;; items is #f then the test is ok to be handed off to launch (but not before)
	 ;; 
	 ((not items)
          (BB> "rtq-2")
	  (debug:print-info 4 *default-log-port* "OUTER COND: (not items)")
	  (if (and (not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path required: required-tests))
		   (not (null? tal)))
	      (loop (car tal)(cdr tal) reg reruns))
	  (runs:testdat-prereqs-not-met-set! testdat (rmt:get-prereqs-not-met run-id waitons hed item-path mode: testmode itemmaps: itemmaps))
	  (runs:dat-can-run-more-tests-set! runsdat (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
	  (let ((loop-list (runs:process-expanded-tests runsdat testdat)))
	      (if loop-list (apply loop loop-list))))

	 ;; items processed into a list but not came in as a list been processed
	 ;;
	 ((and (list? items)     ;; thus we know our items are already calculated
	       (not   itemdat))  ;; and not yet expanded into the list of things to be done
          (BB> "rtq-3")
	  (debug:print-info 4 *default-log-port* "OUTER COND: (and (list? items)(not itemdat))")
	  ;; Must determine if the items list is valid. Discard the test if it is not.
	  (if (and (list? items)
		   (> (length items) 0)
		   (and (list? (car items))
			(> (length (car items)) 0))
		   (debug:debug-mode 1))

          (let* ((items-in-testpatt
                  (filter
                   (lambda (my-itemdat)
                     (tests:match test-patts hed (item-list->path my-itemdat) required: required-tests))
                   items) ))
            (if (null? items-in-testpatt)

                (begin
                  (let ((test-id   (rmt:get-test-id run-id test-name "")))

                    (if test-id
                        (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "ZERO_ITEMS" "This test has no items which match test pattern.")))
                  (BB> "NEED TO FLUNK OUT "hed))
                
                (for-each (lambda (my-itemdat)
                            (let* ((new-test-record (let ((newrec (make-tests:testqueue)))
                                                      (vector-copy! test-record newrec)
                                                      newrec))
                                   (my-item-path (item-list->path my-itemdat))
                                   (newtestname (db:test-make-full-name hed my-item-path)))    ;; test names are unique on testname/item-path
                              (tests:testqueue-set-items!     new-test-record #f)
                            (tests:testqueue-set-itemdat!   new-test-record my-itemdat)
                            (tests:testqueue-set-item_path! new-test-record my-item-path)
                            (hash-table-set! test-records newtestname new-test-record)
                            (set! tal (append tal (list newtestname)))))  ;; since these are itemized create new test names testname/itempath
                          items-in-testpatt)))
                          
            
	  ;; (debug:print-info 0 *default-log-port* "Test " (tests:testqueue-get-testname test-record) " is itemized but has no items")

	  ;; At this point we have possibly added items to tal but all must be handed off to 
	  ;; INNER COND logic. I think loop without rotating the queue 
	  ;; (loop hed tal reg reruns))
	  ;; (let ((newtal (append tal (list hed))))  ;; We should discard hed as it has been expanded into it's items? Yes, but only if this *is* an itemized test
	  ;; (loop (car newtal)(cdr newtal) reg reruns)
	  (if (null? tal)
	      #f
	      (loop (car tal)(cdr tal) reg reruns)))
	    
	 ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	 ;;    - but only do that if resources exist to kick off the job
	 ;; EXPAND ITEMS
	 ((or (procedure? items)(eq? items 'have-procedure))
          (BB> "rtq-4")
	  (let ((can-run-more    (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs)))
	    (if (and (list? can-run-more)
		     (car can-run-more))
		(let ((loop-list (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmaps)))
		  (if loop-list
		      (apply loop loop-list)
                      (debug:print-info 4 *default-log-port* " -- Can't expand hed="hed)
                      )
                  )
		;; if can't run more just loop with next possible test
		(loop (car newtal)(cdr newtal) reg reruns))))
	    
	 ;; this case should not happen, added to help catch any bugs
	 ((and (list? items) itemdat)
          (BB> "rtq-5")
	  (debug:print-error 0 *default-log-port* "Should not have a list of items in a test and the itemspath set - please report this")
	  (exit 1))
	 ((not (null? reruns))
          (BB> "rtq-6")
	  (let* ((newlst (tests:filter-non-runnable run-id tal test-records)) ;; i.e. not FAIL, WAIVED, INCOMPLETE, PASS, KILLED,
		 (junked (lset-difference equal? tal newlst)))
	    (debug:print-info 4 *default-log-port* "full drop through, if reruns is less than 100 we will force retry them, reruns=" reruns ", tal=" tal)
	    (if (< num-retries max-retries)
		(set! newlst (append reruns newlst)))
	    (set! num-retries (+ num-retries 1))
	    ;; (thread-sleep! (+ 1 *global-delta*))
	    (if (not (null? newlst))
		;; since reruns have been tacked on to newlst create new reruns from junked
		(loop (car newlst)(cdr newlst) reg (delete-duplicates junked)))))
	 ((not (null? tal))
          (BB> "rtq-7")
	  (debug:print-info 4 *default-log-port* "I'm pretty sure I shouldn't get here."))
	 ((not (null? reg)) ;; could we get here with leftovers?
          (BB> "rtq-8")
	  (debug:print-info 0 *default-log-port* "Have leftovers!")
	  (loop (car reg)(cdr reg) '() reruns))
	 (else
          (BB> "rtq-9")
	  (debug:print-info 4 *default-log-port* "Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	 ))) ;; end loop on sorted test names
    
    ;; now *if* -run-wait we wait for all tests to be done
    ;; Now wait for any RUNNING tests to complete (if in run-wait mode)
    (thread-sleep! 5) ;; I think there is a race condition here. Let states/statuses settle
    (let wait-loop ((num-running      (rmt:get-count-tests-running-for-run-id run-id))