Megatest

      (begin
	(debug:print-error 0 *default-log-port* "command \"/bin/readlink -f " path "\" failed.")
	path) ;; just give up
    (with-input-from-pipe
	(conc "/bin/readlink -f " path)
      (lambda ()
	(read-line)))))

(define (common:get-intercept onemin fivemin)
  (let* ((load-change (- onemin fivemin))
         (tchange     (- 300 60)))
  (max (+ onemin (* 60 (/ load-change tchange)))0))
)

(define (common:get-delay load-in numcpus)
  (max (/ (expt 5 (* 4 (/ load-in numcpus))) 10) 0)
)


(define (get-cpu-load #!key (remote-host #f))
  (car (common:get-cpu-load remote-host)))
;;   (let* ((load-res (process:cmd-run->list "uptime"))
;; 	 (load-rx  (regexp "load average:\\s+(\\d+)"))
;; 	 (cpu-load #f))
;;     (for-each (lambda (l)

       
       (debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")
       (if (and (null? incompleted)
                (null? oldlaunched)
                (null? toplevels))
           #f
           #t)))))

;; given a launch delay (minimum time from last launch) return amount of time to wait
;;
;; (define (db:launch-delay-left dbstruct run-id launch-delay)
  


(define (db:get-status-from-final-status-file run-dir)
  (let (
       (infile (conc run-dir "/.final-status")))
  (let ((infile (conc run-dir "/.final-status")))

       ;; first verify we are able to write the output file
       (if (not (file-read-access? infile))
          (begin 
	        (debug:print 0 *default-log-port* "ERROR: cannot read " infile)
    ;; first verify we are able to write the output file
    (if (not (file-read-access? infile))
        (begin 
	  (debug:print 0 *default-log-port* "ERROR: cannot read " infile)
          (debug:print 0 *default-log-port* "ERROR: run-dir is " run-dir)
          #f
          )
          (with-input-from-file infile read-lines)
       )
        (with-input-from-file infile read-lines)
	)))
  )
)




;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));

(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)

;; NEW BEHAVIOR: Look only at single run with run-id
;; 
;; (define (db:get-running-stats dbstruct run-id)
(define (db:get-count-tests-running-for-run-id dbstruct run-id fastmode)
  (let* ((qry (if fastmode
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? LIMIT 1;"
		   "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=?;")))
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=?;")))
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (db)
       (let* ((stmth (db:get-cache-stmth dbstruct db qry)))
	 (sqlite3:first-result stmth run-id))))))

;; For a given testname how many items are running? Used to determine
;; probability for regenerating html
;; 
(define (db:get-count-tests-running-for-testname dbstruct run-id testname)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
     (let* ((stmt "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? AND NOT (uname = 'n/a' AND item_path = '') AND testname=?;")
	    (stmth (db:get-cache-stmth dbstruct db stmt)))
     (sqlite3:first-result
       (sqlite3:first-result
      db
      "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? AND NOT (uname = 'n/a' AND item_path = '') AND testname=?;" run-id testname))))

	stmth run-id testname)))))

(define (db:get-not-completed-cnt dbstruct run-id)
(db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)

                                     db
                                     "SELECT state,status,count(id) FROM tests WHERE run_id=?  GROUP BY state,status;"
                                     run-id )))))
   test-count-recs))


;; BBnote: db:get-all-state-status-counts-for-test returns dbr:counts object aggregating state and status of items of a given test, *not including rollup state/status*
;;
;; NOTE: This is called within a transaction
;;
(define (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path item-state-in item-status-in)
  (let* ((test-info   (db:get-test-info dbstruct run-id test-name item-path))
         (item-state  (or item-state-in (db:test-get-state test-info))) 
         (item-status (or item-status-in (db:test-get-status test-info)))
         (other-items-count-recs (db:with-db
                                  dbstruct #f #f
                                  (lambda (db)

	     (numrows      1)
	     (numcols      1))
	(iup:attribute-set! stats-matrix "CLEARVALUE" "CONTENTS")
	(iup:attribute-set! stats-matrix "NUMCOL" max-col )
	(iup:attribute-set! stats-matrix "NUMLIN" (if (< max-row max-visible) max-visible max-row)) ;; min of 20
	(iup:attribute-set! stats-matrix "NUMCOL_VISIBLE" max-col-vis)
	(iup:attribute-set! stats-matrix "NUMLIN_VISIBLE" (if (> max-row max-visible) max-visible max-row))
	(print "row-indices: " row-indices " col-indices: " col-indices)
	;;(print "row-indices: " row-indices " col-indices: " col-indices)
	;; Row labels
	(for-each (lambda (ind)
		    (let* ((name (car ind))
			   (num  (cadr ind))
			   (key  (conc num ":0")))
		      (if (not (equal? (iup:attribute stats-matrix key) name))
			  (begin

;; 
;;     You should have received a copy of the GNU General Public License
;;     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

;;======================================================================

(declare (unit genexample))
(use posix regex)
(use posix regex matchable)

(include "db_records.scm")

(define genexample:example-logpro
#<<EOF
  ;; You should have at least one expect:required. This ensures that your process ran
  ;; comment out the line below and replace "put pattern here" with a pattern that will
  ;; always be seen in your log file if the step runs successfully.
  ;;

			(if (string-match ".*\\.sh$" script)
			    (begin
			      (with-output-to-file (conc testdir "/" script)
				(lambda ()
				  (print genexample:example-script)))
			      (system (conc "chmod ug+r,a+x " (conc testdir "/" script)))))))
		    steps))))))

;; easier to work backwards than change the upstream code
;;
(define (hrs-min-sec->seconds str)
  (let* ((parts (string-split str))
	 (res   0))
    (for-each
     (lambda (part)
       (set! res
	     (+ res
		(match (string-match "(\\d+)([a-z])" part)
		  ((_ val units)(* (string->number val)(case (string->symbol units)
							 ((s) 1)
							 ((m) 60)
							 ((h) 3600))))
		  (else 0)))))
     parts)
    res))

;; generate a skeleton Megatest area from a current area with runs
;;
;;    specify target, runname etc to use specific runs for the template
;;
(define (genexample:extract-skeleton-area dest-path)
  (let* ((target    (args:get-arg "-target"))
	 (runname   (args:get-arg "-runname"))
	 (obtuse    (make-hash-table))
	 (obtusef   (args:get-arg "-obfuscate"))
	 (letters   (string-split-fields "\\S" "abcdefghijklmnopqrstuvwxyz"))
	 (maxletter (- (length letters) 1))
	 (lastlet   0)
	 (lastnum   1) 
	 (obfuscate (lambda (instr)
		      (or (hash-table-ref/default obtuse instr #f)
			  (if obtusef
			      (let* ((letter (list-ref letters lastlet))
				     (val    (conc letter lastnum)))
				(if (>= lastlet maxletter)
				    (begin
				      (set! lastlet 0)
				      (set! lastnum (+ lastnum 1)))
				    (set! lastlet (+ lastlet 1)))
				(hash-table-set! obtuse instr val)
				val)
			      instr)))))
    (if (not (and target runname))
	(debug:print 0 *default-log-port* "WARNING: For best results please specifiy -target and -runname for a good run to use as a template."))
    (if (not (and (file-exists? "megatest.config")
		  (file-exists? "megatest.db")))
	(begin
	  (debug:print 0 *default-log-port* "ERROR: this command must be run at the top level of a megatest area where runs have been completed")
	  (exit)))
	     
    ;; first create the dest path and needed subdirectories
    (if (not (file-exists? dest-path))
	(begin
	  (create-directory dest-path)
	  (create-directory (conc dest-path "/tests")))
	(if (file-exists? (conc dest-path "/megatest.config"))
	    (begin
	      (debug:print 0 *default-log-port* "ERROR: destination path already has megatest.config, stopping now.")
	      (exit))))

    ;; dump the config files from this area to the dest area
    (if (args:get-arg "-obfuscate")
	(debug:print 0 *default-log-port* "WARNING: obfuscation is NOT done on megatest.config and runconfigs.config. Please edit those files to remove any sensitive information!"))
    (system (conc "megatest -show-config > " dest-path "/megatest.config"))
    (system (conc "megatest -show-runconfig > " dest-path "/runconfigs.config"))

    ;; create stepsinfo and items refdbs, some stuff has to be done due to refdb not initing area
    ;;
    ;;            sheet       row       col      value
    ;; stepsinfo  testname    itempath  stepname steptime
    ;; miscinfo   "itemsinfo" testname  itempath "x"
    ;;  
    (for-each
     (lambda (rdbname)
       (if (not (file-exists? (conc dest-path "/" rdbname)))
	   (begin
	     (create-directory (conc dest-path "/" rdbname "/sxml") #t)
	     (with-output-to-file (conc dest-path "/" rdbname "/sheet-names.cfg")
	       (lambda ()(print))))))
     '("stepsinfo" "miscinfo"))
    
    (let* ((runs     (rmt:simple-get-runs (or runname "%") #f #f (or target "%")))
	   (tests    (make-hash-table)) ;; just tests
	   (fullt    (make-hash-table)) ;; all test/items
	   (testreg  (make-hash-table)) ;; for the testconfigs
	   (stepsrdb (conc dest-path "/stepsinfo"))
	   (miscrdb  (conc dest-path "/miscinfo")))
      (if (> (length runs) 1)
	  (debug:print-info 0 *default-log-port* "More than one run matches, first found data will be used."))
      ;; get all testnames
      (for-each
       (lambda (run-id)
	 (let* ((tests-data (rmt:get-tests-for-run run-id "%" '() '() #f #f #f #f #f #f #f #f)))
	   (for-each
	    (lambda (testdat)
	      (let* ((test-id      (db:test-get-id testdat))
		     (testname     (db:test-get-testname testdat))
		     (item-path    (db:test-get-item-path testdat))
		     (tlevel       (db:test-get-is-toplevel testdat))
		     (tfullname    (db:test-get-fullname testdat))
		     ;; now get steps info
		     (test-steps   (tests:get-compressed-steps run-id test-id))
		     (testconfig   (tests:get-testconfig testname item-path testreg #f)))

		
		(if (not (hash-table-exists? fullt tfullname))
		    ;; do the work for this test if not previously done
		    (let* ((new-test-dir (conc dest-path "/tests/" (obfuscate testname)))
			   (tconfigf     (conc new-test-dir "/testconfig")))
		      (print "Analyzing and extracting info for " tfullname " as " (obfuscate testname))
		      (print "  toplevel: " (if tlevel "yes" "no"))
		      (hash-table-set! fullt tfullname #t) ;; track that this one has been seen
		      (if (not (directory-exists? new-test-dir))
			  (create-directory new-test-dir #t))

		      ;; create the testconfig IIF we are a toplevel or an item AND the testconfig has not been previously created
		      (if (and (or (not tlevel)
				   (not (equal? item-path "")))
			       (not (file-exists? tconfigf)))
			  (with-output-to-file tconfigf
			    (lambda ()
			      ;; first the ezsteps
			      (print "[ezsteps]")
			      (for-each
			       (lambda (teststep)
				 (let* ((step-name  (vector-ref teststep 0)))
				   (print (obfuscate step-name)
					  " sleep $(refdb lookup #{getenv MT_RUN_AREA_HOME}/stepsinfo "
					  (obfuscate testname) " $MT_ITEMPATH "
					  (obfuscate step-name) ")")))
			       test-steps)

			      ;; now the requirements section
			      (if testconfig
				  (begin
				    (print "\n[requirements]")
				    (for-each
				     (lambda (entry)
				       (let* ((key (car entry))
					      (val (cadr entry)))
					 (case (string->symbol key)
					   ((waiton)  (print "waiton " (obfuscate val)))
					   (else      (print key " " val)))))
				     (configf:get-section testconfig "requirements")))
				  #;(print "WARNING: No testconfig data for " testname ", " item-path))
				    
			      (print "\n[items]")
			      (print "THE_ITEM [system refdb getrow #{getenv MT_RUN_AREA_HOME}/miscinfo itemsinfo " (obfuscate testname)" | awk '{print $1}']")
			      )))

		      ;; fill the stepsrdb
		      (for-each
		       (lambda (teststep)
			 (let* ((step-name     (vector-ref teststep 0))
				(step-duration (hrs-min-sec->seconds (vector-ref teststep 4))))
			   
			   (system (conc "refdb set " stepsrdb " " (obfuscate testname)
					 " '" (if (equal? item-path "")
						  "no-item-path"
						  (obfuscate item-path))
					 "' " (obfuscate step-name) " " step-duration))))
		       test-steps)

		      ;; miscinfo   "itemsinfo" testname  itempath "x"
		      (if (not (equal? item-path ""))
			  (system (conc "refdb set " miscrdb " itemsinfo " (obfuscate testname) " " (obfuscate item-path) " x")))

		      ))))
	    tests-data)))
       (map (lambda (runrec)(simple-run-id runrec)) runs)))
    ))

                            in the [archive-disks] section.
                            cmd: keep-html, restore, save, save-remove, get,replicate-db (use 
                            -dest to set destination), -include path1,path2... to get or save specific files
  -generate-html          : create a simple html dashboard for browsing your runs
  -generate-html-structure  : create a top level html veiw to list targets/runs and a Run view within each run directory.  
  -list-run-time          : list time requered to complete runs. It supports following switches
                            -run-patt <patt> -target-patt <patt> -dumpmode <csv,json,plain-text>
  -list-test-time	   : list time requered to complete each test in a run. It following following arguments
  -list-test-time	  : list time requered to complete each test in a run. It following following arguments
                            -runname <patt> -target <patt> -dumpmode <csv,json,plain-text>

  -extract-skeleton targd : extract a skeleton area based on the current area. Use median step run times.
  		


Diff report
  -diff-rep               : generate diff report (must include -src-target, -src-runname, -target, -runname
                                                  and either -diff-email or -diff-html)
  -src-target <target>
  -src-runname <target>
  -diff-email <emails>    : comma separated list of email addresses to send diff report

                        "-src-target"
                        "-src-runname"
                        "-diff-email"
			"-sync-to"			
			"-pgsync"
			"-kill-wait"    ;; wait this long before removing test (default is 10 sec)
                        "-diff-html"

			;; wizards, area capture, setup new ...
			"-extract-skeleton"
			)
 		 (list  "-h" "-help" "--help"
			"-manual"
			"-version"
		        "-force"
		        "-xterm"
		        "-showkeys"

                        "-sync-brute-force"
			"-logging"
			"-v" ;; verbose 2, more than normal (normal is 1)
			"-q" ;; quiet 0, errors/warnings only

                        "-diff-rep"

			"-obfuscate"
			;; junk placeholder
			;; "-:p"
			
                        )
		 args:arg-hash
		 0))

     
(if (args:get-arg "-generate-html")
    (let* ((toppath (launch:setup)))
      (if (tests:create-html-tree #f)
          (debug:print-info 0 *default-log-port* "HTML output created in " toppath "/lt/page0.html")
          (debug:print 0 *default-log-port* "Failed to create HTML output in " toppath "/lt/runs-index.html"))
      (set! *didsomething* #t)))

(if (args:get-arg "-generate-html-structure")
    (let* ((toppath (launch:setup)))
      ;(if (tests:create-html-tree #f)
 				(if (tests:create-html-summary #f)
          (debug:print-info 0 *default-log-port* "HTML output created in " toppath "/lt/targets.html")
          (debug:print 0 *default-log-port* "Failed to create HTML output in " toppath "/lt/runs-index.html"))
      (set! *didsomething* #t)))

(if (args:get-arg "-extract-skeleton")
    (let* ((toppath (launch:setup)))
      (genexample:extract-skeleton-area (args:get-arg "-extract-skeleton"))
      (set! *didsomething* #t)))

;;======================================================================
;; Exit and clean up
;;======================================================================

(if (not *didsomething*)
    (debug:print 0 *default-log-port* help)
    (set! *time-to-exit* #t)

		    (lambda ()(print (current-seconds))))
		  (close-output-port ouf))))
	  (runs:dat-last-fuel-check-set! rdat (current-seconds))))))
  
;; Fourth try, do accounting through time
;;
(define (runs:parallel-runners-mgmt rdat)
  (let ((time-to-check 10) ;; 28
	(time-to-wait  30)
  (let ((time-to-check (configf:lookup-number *configdat* "runners" "time-to-check" default: 10)) ;; 28
	(time-to-wait  (configf:lookup-number *configdat* "runners" "time-to-wait" default: 30))
	(now-time      (current-seconds)))
    (if (> (- now-time (runs:dat-last-fuel-check rdat)) time-to-check) ;; time to check
	(runs:wait-on-softlock rdat "runners"))))

;; To test parallel-runners management start a repl:
;;  megatest -repl
;; then run:

		     (begin
		       (mt:test-set-state-status-by-id run-id test-id "COMPLETED" "SKIP" skip-test)
		       (debug:print-info 1 *default-log-port* "SKIPPING Test " full-test-name " due to " skip-test))
		     ;;
		     ;; Here the test is handed off to launch.scm for launch-test to complete the launch process
		     ;;
		     (if (not (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat flags))
			 (begin
	 		 (begin
			   (print "ERROR: Failed to launch the test. Exiting as soon as possible")
			   (set! *globalexitstatus* 1) ;; 
			   (process-signal (current-process-id) signal/kill))))))))
	((KILLED) 
	 (debug:print 1 *default-log-port* "NOTE: " full-test-name " is already running or was explictly killed, use -force to launch it.")
	 (hash-table-set! test-registry (db:test-make-full-name test-name test-path) 'DONOTRUN)) ;; KILLED))
	((LAUNCHED REMOTEHOSTSTART RUNNING)