Megatest

    (3 "SKIP")
    (4 "WARN")
    (5 "WAIVED")
    (6 "CHECK")
    (7 "STUCK/DEAD")
    (8 "DEAD")
    (9 "FAIL")
    (10 "PREQ_FAIL")
    (11 "PREQ_DISCARDED")
    (12 "ABORT")))

(define *common:ended-states*       ;; states which indicate the test is stopped and will not proceed
  '("COMPLETED" "ARCHIVED" "KILLED" "KILLREQ" "STUCK" "INCOMPLETE" ))

(define *common:badly-ended-states* ;; these roll up as CHECK, i.e. results need to be checked
  '("KILLED" "KILLREQ" "STUCK" "INCOMPLETE" "DEAD"))

(define *common:well-ended-states* ;; an item's prereq in this state allows item to proceed
  '("PASS" "WARN" "CHECK" "WAIVED" "SKIP"))

;; BBnote: *common:running-states* used from db:set-state-status-and-roll-up-items
(define *common:running-states*     ;; test is either running or can be run
  '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED" "STARTED"))

(define *common:cant-run-states*    ;; These are stopping conditions that prevent a test from being run
  '("COMPLETED" "KILLED" "UNKNOWN" "INCOMPLETE" "ARCHIVED"))

     (lambda (frame)
       (let* ((this-loc (vector-ref frame 0))
              (temp     (string-split (->string this-loc) " "))
              (this-func (if (and (list? temp) (> (length temp) 1)) (cadr temp) "???")))
         (if (equal? this-func "BB>")
             (set! location this-loc))))
     stack)
    (let* ((color-on "\x1b[1m")
           (color-off "\x1b[0m")
           (dp-args
            (append
             (list 0 *default-log-port*
                   (conc color-on location "@"(/ (- (current-milliseconds) *BB-process-starttime*) 1000) color-off "   ")  )
             in-args)))
      (apply debug:print dp-args))))

(define *BBpp_custom_expanders_list* (make-hash-table))



;; register hash tables with BBpp.

;;
;; (define (db:launch-delay-left dbstruct run-id launch-delay)
  

;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));

(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
	 (deadtime-str (configf:lookup *configdat* "setup" "deadtime")) ; FIXME suspect test run time & deadtime are not well matched; resulting in COMPLETED/DEAD status of an a-ok running test
	 (deadtime     (if (and deadtime-str
				(string->number deadtime-str))
			   (string->number deadtime-str)
			   7200))) ;; two hours
    (db:with-db 
     dbstruct #f #f
     (lambda (db)

              (min-incompleted-ids (map car incompleted)) ;; do 'em all
              (all-ids             (append min-incompleted-ids (map car oldlaunched))))
         (if (> (length all-ids) 0)
             (begin
               (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as INCOMPLETE")
               (for-each
                (lambda (test-id)
                  (db:test-set-state-status dbstruct run-id test-id "COMPLETED" "DEAD" "Test failed to complete")) ;; fix for one aspect of Randy's ticket 1405717332 ;; TODO - fix problem where test goes to COMPLETED/DEAD while in progress, only later to go to COMPLETED/PASS.  ref ticket 220546828
                all-ids))))))))

;; ALL REPLACED BY THE BLOCK ABOVE
;;
;; 	    (sqlite3:execute 
;; 	     db
;; 	     (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN (" 

	;;	(if (equal? (db:test-get-item-path testdat) "")
	;;	    (db:test-get-testname testdat)
	;;	    (conc (db:test-get-testname testdat)
	;;		  "/"
	;;		  (db:test-get-item-path testdat))))
	 running-tests) ;; calling functions want the entire data
       '())

   ;; collection of: for each waiton -
   ;;   if this ref-test-name is an item in an itemized test and mode is itemwait/itemmatch:
   ;;     if waiton is not itemized - if waiton is not both completed and in ok status, add as unmet prerequisite
   ;;     if waiton is itemized:
   ;;           and waiton's items are not expanded, add as unmet prerequisite
   ;;           else if matching waiton item is not both completed and in an ok status, add as unmet prerequisite
   ;;   else
   ;;    if waiton toplevel is not in both completed and ok status, add as unmet prerequisite

   (if (or (not waitons)
	   (null? waitons))
       '()
       (let* ((ref-test-itemized-mode (not (null? (lset-intersection eq? mode '(itemmatch itemwait)))))
              (ref-test-toplevel-mode (not (null? (lset-intersection eq? mode '(toplevel)))))
              (ref-test-is-toplevel   (equal? ref-item-path ""))
              (ref-test-is-item       (not ref-test-is-toplevel))
              (unmet-pre-reqs '())
	      (result         '())
              (unmet-prereq-items '())
              )
	 (for-each  ; waitons
	  (lambda (waitontest-name)
	    ;; by getting the tests with matching name we are looking only at the matching test 
	    ;; and related sub items
	    ;; next should be using mt:get-tests-for-run?

            (let (;(waiton-is-itemized ...)
                  ;(waiton-items-are-expanded ...)
                  (waiton-tests             (db:get-tests-for-run-state-status dbstruct run-id waitontest-name))
		  (ever-seen         #f)
		  (parent-waiton-met #f)
		  (item-waiton-met   #f)

                  )
	      (for-each ; test expanded from waiton
	       (lambda (waiton-test) 

		 (let* ((waiton-state             (db:test-get-state waiton-test))
			(waiton-status            (db:test-get-status waiton-test))
			(waiton-item-path         (db:test-get-item-path waiton-test)) ;; BB- this is the upstream itempath
                        (waiton-is-toplevel       (equal? waiton-item-path ""))
                        (waiton-is-item           (not waiton-is-toplevel))
			(waiton-is-completed      (member waiton-state  *common:ended-states*))
			(waiton-is-running        (member waiton-state  *common:running-states*))
			(waiton-is-killed         (member waiton-state  *common:badly-ended-states*))
			(waiton-is-ok             (member waiton-status *common:well-ended-states*))
			;;                                       testname-b    path-a    path-b
			(same-itempath     (db:compare-itempaths ref-test-name waiton-item-path ref-item-path itemmaps))) ;; (equal? ref-item-path waiton-item-path)))
		   (set! ever-seen #t)
                   ;;(BB> "***consider waiton "waiton-test"/"waiton-item-path"***")
                   (cond
                    ;; case 0 - toplevel of an itemized test, at least one item in prereq has completed
                    ((and waiton-is-item ref-test-is-toplevel ref-test-itemized-mode waiton-is-completed)
                     (set! parent-waiton-met #t))

                    ;; case 1, non-item (parent test) is 
		    ((and waiton-is-toplevel ;; this is the parent test of the waiton being examined
			  waiton-is-completed
                          ;;(BB> "cond1")
			  (or waiton-is-ok ref-test-toplevel-mode)) ;;  itemmatch itemwait))))))
		     (set! parent-waiton-met #t))
		    ;; Special case for toplevel and KILLED
		    ((and waiton-is-toplevel ;; this is the parent test
			  waiton-is-killed
			  (member 'toplevel mode))
                     ;;(BB> "cond2")
		     (set! parent-waiton-met #t))
		    ;; For itemwait mode IFF the previous matching item is good the set parent-waiton-met


                    ((and ref-test-itemized-mode ref-test-is-item same-itempath)
                     ;;(BB> "cond3")
		     (if (and waiton-is-completed (or waiton-is-ok ref-test-toplevel-mode)) 
                         (set! item-waiton-met #t)
                         (set! unmet-prereq-items (cons waiton-test unmet-prereq-items)))
                     (if (and waiton-is-toplevel ;; if upstream rollup test is completed, parent-waiton-met is set
			      (or waiton-is-completed waiton-is-running))
			 (set! parent-waiton-met #t)))
		    ;; normal checking of parent items, any parent or parent item not ok blocks running
		    ((and waiton-is-completed
			  (or waiton-is-ok 
			      (member 'toplevel mode))              ;; toplevel does not block on FAIL
			  (and waiton-is-ok (member 'itemmatch mode) ;; itemmatch blocks on not ok
                               ))
                     ;;(BB> "cond4")
		     (set! item-waiton-met #t))

                    ((and waiton-is-completed waiton-is-ok same-itempath)
                     ;;(BB> "cond5")
                     (set! item-waiton-met #t))
                    (else
                     #t
                     ;;(BB> "condelse")
                     ))))
               waiton-tests)
	      ;; both requirements, parent and item-waiton must be met to NOT add item to
	      ;; prereq's not met list
               ;; (BB>
               ;;  "\n* waiton-tests           "waiton-tests
               ;;  "\n* parent-waiton-met      "parent-waiton-met
               ;;  "\n* item-waiton-met        "item-waiton-met
               ;;  "\n* ever-seen              "ever-seen
               ;;  "\n* ref-test-itemized-mode "ref-test-itemized-mode
               ;;  "\n* unmet-prereq-items     "unmet-prereq-items
               ;;  "\n* result (pre)           "result
               ;;  "\n* ever-seen              "ever-seen
               ;;  "\n")

              (cond
               ((and ref-test-itemized-mode ref-test-is-item (not (null? unmet-prereq-items)))
                (set! result (append unmet-prereq-items result)))
               ((not (or parent-waiton-met item-waiton-met))
                (set! result (append (if (null? waiton-tests) (list waitontest-name) waiton-tests) result))) ;; appends the string if the full record is not available
	      ;; if the test is not found then clearly the waiton is not met...
	      ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
               ((not ever-seen)
                (set! result (append (if (null? waiton-tests)(list waitontest-name) waiton-tests) result))))))
	  waitons)
	 (delete-duplicates result)))))

;;======================================================================
;; Just for sync, procedures to make sync easy
;;======================================================================

;; BBnote - state status dashboard button color / text defined here
(define (gutils:get-color-for-state-status state status);; #!key (get-label #f))
  ;; ((if get-label cadr car)
  (case (string->symbol state)
    ((COMPLETED) ;; ARCHIVED)
     (case (string->symbol status)
       ((PASS)        (list "70  249 73" status))
       ((PREQ_FAIL PREQ_DISCARDED) (list "255 127 127" status))
       ((WARN WAIVED) (list "255 172 13" status))
       ((SKIP)        (list (gutils:get-color-spec 'SKIP) status))
       ((ABORT)       (list "198 36 166" status))
       (else (list "253 33 49" status))))
    ((ARCHIVED)
     (case (string->symbol status)
       ((PASS)        (list "70  170 73" status))

;; Always use two or four digit decimal
;; 1.01, 1.02...1.10,1.11,1.1101 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.6433)

       "-runall"
       "run all tests"
       (lambda (target runname keys keyvals)
         (if (args:get-arg "-rerun-clean") ;; first set states/statuses correct
             (let ((states   (or (configf:lookup *configdat* "validvalues" "cleanrerun-states")
                                 "KILLREQ,KILLED,UNKNOWN,INCOMPLETE,STUCK,NOT_STARTED"))
                   (statuses (or (configf:lookup *configdat* "validvalues" "cleanrerun-statuses")
                                 "FAIL,INCOMPLETE,ABORT,CHECK,DEAD,PREQ_FAIL,PREQ_DISCARDED")))
               (hash-table-set! args:arg-hash "-preclean" #t)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                state:  states
                                ;; status: statuses

  ;; Take advantage of a good place to exit if running the one-pass methodology
  (if (and (> (runs:dat-can-run-more-tests-count runsdat) 20)
	   (args:get-arg "-one-pass"))
      (exit 0))
  (thread-sleep! (cond
        	  ((> (runs:dat-can-run-more-tests-count runsdat) 20)
		   (if (runs:lownoise "waiting on tasks" 60)(debug:print-info 2 *default-log-port* "waiting for tasks to complete, sleeping briefly ..."))
                   (configf:lookup-number *configdat* "setup" "inter-test-delay" default: 2) ;; was 2
		   );; obviously haven't had any work to do for a while
        	  (else 0)))
  (let* ((num-running             (rmt:get-count-tests-running run-id))
	 (num-running-in-jobgroup (rmt:get-count-tests-running-in-jobgroup run-id jobgroup))
	 (job-group-limit         (let ((jobg-count (config-lookup *configdat* "jobgroups" jobgroup)))
				    (if (string? jobg-count)
					(string->number jobg-count)
					jobg-count))))

	       (if (and waiton (not (member waiton test-names)))
		   (let* ((waiton-record   (hash-table-ref/default test-records waiton #f))
			  (waiton-tconfig  (if waiton-record (vector-ref waiton-record 1) #f))
			  (waiton-itemized (and waiton-tconfig
						(or (hash-table-ref/default waiton-tconfig "items" #f)
						    (hash-table-ref/default waiton-tconfig "itemstable" #f))))
			  (itemmaps        (tests:get-itemmaps config))  ;; (configf:lookup config "requirements" "itemmap"))
			  (new-test-patts  (tests:extend-test-patts test-patts hed waiton itemmaps))) ;; BB: items expanded here
		     (debug:print-info 0 *default-log-port* "Test " waiton " has " (if waiton-record "a" "no") " waiton-record and" (if waiton-itemized " " " no ") "items")
		     ;; need to account for test-patt here, if I am test "a", selected with a test-patt of "hed/b%"
		     ;; and we are waiting on "waiton" we need to add "waiton/,waiton/b%" to test-patt
		     ;; is this satisfied by merely appending "/" to the waiton name added to the list?
		     ;;
		     ;; This approach causes all of the items in an upstream test to be run 

		     ;; (set! test-names (cons waiton test-names))))) ;; was an append, now a cons
		     )))
	     (delete-duplicates (append waitons waitors)))
	    (let ((remtests (delete-duplicates (append waitons tal))))
	      (if (not (null? remtests))
		  (begin
		    ;; (debug:print-info 0 *default-log-port* "Preprocessing continues for " (string-intersperse remtests ", "))
		    (loop (car remtests)(cdr remtests)))))))) ;; end test-names loop

    (if (not (null? required-tests))
	(debug:print-info 1 *default-log-port* "Adding \"" (string-intersperse required-tests " ") "\" to the run queue"))
    ;; NOTE: these are all parent tests, items are not expanded yet.
    (debug:print-info 4 *default-log-port* "test-records=" (hash-table->alist test-records))
    (let ((reglen (configf:lookup *configdat* "setup" "runqueue")))
      (if (> (length (hash-table-keys test-records)) 0)

;;   loop with (car reg) tal (cdr reg) reruns
;; If tal is empty
;;   but have items in reg; loop with (car reg)(cdr reg) '() reruns
;;   If reg is empty => all done

(define (runs:queue-next-hed tal reg n regfull)
  (if regfull
      (if (null? reg) #f (car reg))
      (if (null? tal) ;; tal is used up, pop from reg
	  (if (null? reg) #f (car reg))
	  (car tal))))

(define (runs:queue-next-tal tal reg n regfull)
  (if regfull
      tal
      (if (null? tal) ;; must transfer from reg
	  (if (null? reg) '() (cdr reg))
	  (cdr tal))))

(define (runs:queue-next-reg tal reg n regfull)
  (if regfull
      (if (null? reg) '() (cdr reg))
      (if (null? tal) ;; if tal is null and reg not full then '() as reg contents moved to tal
	  '()
	  reg)))

;; this is the list of parameters to the named loop "loop" near the top of runs:run-tests-queue, look around line 1216
;;
(define (runs:loop-values tal reg reglen regfull reruns)
  (list (runs:queue-next-hed tal reg reglen regfull)      ;; hed
        (runs:queue-next-tal tal reg reglen regfull)      ;; tal
        (runs:queue-next-reg tal reg reglen regfull)      ;; reg
        reruns))                                          ;; reruns

;; objective - iterate thru tests
;;    => want to prioritize tests we haven't seen before
;;    => sometimes need to squeeze things in (added to reg)
;;    => review of a previously seen test is higher priority of never visited test
;; reg - list of previously visited tests
;; tal - list of never visited tests
;;   prefer next hed to be from reg than tal.

(define runs:nothing-left-in-queue-count 0)

;; return value of runs:expand-items is passed back to runs-tests-queue and is fed to named loop with this signature:
;;    (let loop ((hed         (car sorted-test-names))
;;	         (tal         (cdr sorted-test-names))
;;	         (reg         '()) ;; registered, put these at the head of tal 
;;	         (reruns      '()))
;; BB: for future reference - suspect target vars are not expanded to env vars at this point (item expansion using [items]\nwhatever [system echo $TARGETVAR] doesnt work right whereas [system echo #{targetvar}] does.. Tal and Randy have tix on this.  on first pass, var not set, on second pass, ok.  
(define (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmaps)
  (let* ((loop-list       (list hed tal reg reruns))
	 (prereqs-not-met (let ((res (rmt:get-prereqs-not-met run-id waitons hed item-path mode: testmode itemmaps: itemmaps)))
			    (if (list? res)
				res
				(begin
				  (debug:print 0 *default-log-port*
					       "ERROR: rmt:get-prereqs-not-met returned non-list!\n"
					       "  res=" res " run-id=" run-id " waitons=" waitons " hed=" hed " item-path=" item-path " testmode=" testmode " itemmaps=" itemmaps)
				  '()))))
         (have-itemized (not (null? (lset-intersection eq? testmode '(itemmatch itemwait)))))
	 ;; (prereqs-not-met (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails           (runs:calc-fails prereqs-not-met))
	 (prereq-fails    (runs:calc-prereq-fail prereqs-not-met))
	 (non-completed   (runs:calc-not-completed prereqs-not-met))
	 (runnables       (runs:calc-runnable prereqs-not-met))
         (unexpanded-prereqs
          (filter (lambda (testname)
                    (let* ((test-rec (hash-table-ref test-records testname))
                           (items       (tests:testqueue-get-items  test-rec)))
                      ;;(BB> "HEY " testname "=>"items)
                      (or (procedure? items)(eq? items 'have-procedure))))
                  waitons))


         )
    (debug:print-info 2 *default-log-port* "START OF INNER COND #2 "
		      "\n can-run-more:    " can-run-more
		      "\n testname:        " hed
		      "\n prereqs-not-met: " (runs:pretty-string prereqs-not-met)
		      "\n non-completed:   " (runs:pretty-string non-completed) 
		      "\n prereq-fails:    " (runs:pretty-string prereq-fails)
		      "\n fails:           " (runs:pretty-string fails)
		      "\n testmode:        " testmode

	    (if (> runs:nothing-left-in-queue-count 2)
		(begin
		  (debug:print 0 *default-log-port* "WARNING: this condition is triggered when there were no items to expand and nothing to run. Please check your run for completeness")
		  (exit 0))
		(set! runs:nothing-left-in-queue-count (+ runs:nothing-left-in-queue-count 1)))
	    #f)))

     ;; desired result of below cond branch:
     ;;   we want to expand items in our test of interest (hed) in the following cases:
     ;;    case 1 - mode is itemmatch or itemwait: 
     ;;       - all prereq tests have been expanded
     ;;       - at least one prereq's items have completed
     ;;    case 2 - mode is toplevel   
     ;;       - prereqs are completed.
     ;;       - or no prereqs can complete 
     ;;    case 3 - mode not specified 
     ;;       - prereqs are completed and passed (we could consider removing "and passed" -- it would change behavior from current)          
     ((or (null? prereqs-not-met)
	  (and (member 'toplevel testmode)
	       (null? non-completed)))
      (debug:print-info 4 *default-log-port* "runs:expand-items: (or (null? prereqs-not-met) (and (member 'toplevel testmode)(null? non-completed)))")
      (let ((test-name (tests:testqueue-get-testname test-record)))
	(setenv "MT_TEST_NAME" test-name) ;; 
	(setenv "MT_RUNNAME"   runname)

	(if (and give-up
		 (not (and (null? tal)(null? reg))))
	    (let ((trimmed-tal (mt:discard-blocked-tests run-id hed tal test-records))
		  (trimmed-reg (mt:discard-blocked-tests run-id hed reg test-records)))
	      (debug:print 1 *default-log-port* "WARNING: test " hed " has discarded prerequisites, removing it from the queue")

	      (let ((test-id (rmt:get-test-id run-id hed "")))
		(if test-id (mt:test-set-state-status-by-id run-id test-id "COMPLETED" "PREQ_DISCARDED" "Failed to run due to discarded prerequisites")))
	      
	      (if (and (null? trimmed-tal)
		       (null? trimmed-reg))
		  #f
                  (runs:loop-values trimmed-tal trimmed-reg reglen regfull reruns)
                  ))
	      (list (car newtal)(append (cdr newtal) reg) '() reruns))))

       (member 'normal testmode))
      (debug:print-info 1 *default-log-port* "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
			(string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
			", removing it from to-do list")
      (let ((test-id (rmt:get-test-id run-id hed "")))
	(if test-id
	    (if (not (null? prereq-fails))
		(mt:test-set-state-status-by-id run-id test-id "COMPLETED" "PREQ_DISCARDED" "Failed to run due to prior failed prerequisites")
		(mt:test-set-state-status-by-id run-id test-id "COMPLETED" "PREQ_FAIL"      "Failed to run due to failed prerequisites"))))
      (if (or (not (null? reg))(not (null? tal)))
	  (begin
	    (hash-table-set! test-registry hed 'CANNOTRUN)
            (runs:loop-values tal reg reglen regfull (cons hed reruns))
            )
	  #f)) ;; #f flags do not loop

	 (have-resources         (car run-limits-info))
	 (num-running            (list-ref run-limits-info 1))
	 (num-running-in-jobgroup(list-ref run-limits-info 2)) 
	 (max-concurrent-jobs    (list-ref run-limits-info 3))
	 (job-group-limit        (list-ref run-limits-info 4))
	 ;; (prereqs-not-met        (rmt:get-prereqs-not-met run-id waitons hed item-path mode: testmode itemmaps: itemmaps))
	 ;; (prereqs-not-met         (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails                  (if (list? prereqs-not-met) ;; TODO: rename fails to failed-prereqs
				      (runs:calc-fails prereqs-not-met)
				      (begin
					(debug:print-error 0 *default-log-port* "prereqs-not-met is not a list! " prereqs-not-met)
					'())))
	 (non-completed           (filter (lambda (x)             ;; remove hed from not completed list, duh, of course it is not completed!
					    (not (equal? x hed)))
					  (runs:calc-not-completed prereqs-not-met)))

	  (begin
	    ;; couldn't run, take a breather
	    (if  (runs:lownoise "Waiting for more work to do..." 60)
		 (debug:print-info 0 *default-log-port* "Waiting for more work to do..."))
	    (thread-sleep! 1)
	    (list (car newtal)(cdr newtal) reg reruns))
	  ;; the waiton is FAIL so no point in trying to run hed ever again
	  (begin
            (let ((my-test-id (rmt:get-test-id run-id test-name item-path)))
              (mt:test-set-state-status-by-id run-id my-test-id "COMPLETED" "PREQ_FAIL" "Failed to run due to failed prerequisites2"))


            
            (if (or (not (null? reg))(not (null? tal)))
                (if (vector? hed)
		  (begin
		    (debug:print 1 *default-log-port* "WARNING: Dropping test " test-name "/" item-path
				 " from the launch list as it has prerequistes that are FAIL")
		    (let ((test-id (rmt:get-test-id run-id hed "")))
		      (if test-id (mt:test-set-state-status-by-id run-id test-id "COMPLETED" "PREQ_FAIL" "Failed to run due to failed prerequisites")))
		    (runs:shrink-can-run-more-tests-count runsdat) ;; DELAY TWEAKER (still needed?)
		    ;; (thread-sleep! *global-delta*)
		    ;; This next is for the items
		    (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "BLOCKED" #f)
		    (hash-table-set! test-registry (db:test-make-full-name test-name item-path) 'removed)
		    (runs:loop-values tal reg reglen regfull reruns))
		  (let ((nth-try (hash-table-ref/default test-registry hed 0)))
		    (cond
		     ((member "RUNNING" (map db:test-get-state prereqs-not-met))
		      (if (runs:lownoise (conc "possible RUNNING prerequistes " hed) 60)
			  (debug:print 0 *default-log-port* "WARNING: test " hed " has possible RUNNING prerequisites, don't give up on it yet."))
		      (thread-sleep! 0.1)
		      (runs:loop-values tal reg reglen regfull reruns))
		     ((or (not nth-try)
			  (and (number? nth-try)
			       (< nth-try 2)))
		      (hash-table-set! test-registry hed (if (number? nth-try)
							     (+ nth-try 1)
							     0))
		      (if (runs:lownoise (conc "not removing test " hed) 60)
			  (debug:print 1 *default-log-port* "WARNING: not removing test " hed " from queue although it may not be runnable due to FAILED prerequisites"))
		      ;; may not have processed correctly. Could be a race condition in your test implementation? Dropping test " hed) ;;  " as it has prerequistes that are FAIL. (NOTE: hed is not a vector)")
		      (runs:shrink-can-run-more-tests-count runsdat) ;; DELAY TWEAKER (still needed?)
		      (runs:loop-values newtal reg reglen regfull reruns))
		     ((symbol? nth-try)
		      (if (eq? nth-try 'removed) ;; removed is removed - drop it NOW
			  (if (null? tal)
			      #f ;; yes, really
			      (list (car tal)(cdr tal) reg reruns))
			  (begin
			    (if (runs:lownoise (conc "FAILED prerequisites or other issue" hed) 60)
				(debug:print 0 *default-log-port* "WARNING: test " hed " has FAILED prerequisites or other issue. Internal state " nth-try " will be overridden and we'll retry."))
			    ;; was: (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "KEEP_TRYING" #f)
                            (mt:test-set-state-status-by-testname run-id test-name item-path "COMPLETED" "PREQ_FAIL" #f)
			    (hash-table-set! test-registry hed 'removed) ;; was 0
                            (if (not (and (null? reg) (null? tal)))
                                (runs:loop-values tal reg reglen regfull reruns)
                                #f))))
		     (else
		      (if (runs:lownoise (conc "FAILED prerequitests and we tried" hed) 60)
			  (debug:print 0 *default-log-port* "WARNING: test " hed " has FAILED prerequitests and we've tried at least 10 times to run it. Giving up now."))
		      ;; (debug:print 0 *default-log-port* "         prereqs: " prereqs-not-met)
		      (hash-table-set! test-registry hed 'removed)
		      (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "TEN_STRIKES" #f)
		      ;; I'm unclear on if this roll up is needed - it may be the root cause of the "all set to FAIL" bug.
		      (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "FAIL" #f) ;; treat as FAIL
		      (list (if (null? tal)(car newtal)(car tal))
			    tal
			    reg
			    reruns)))))
	      ;; ELSE: can't drop this - maybe running? Just keep trying

                ;;(if (not (or (not (null? reg))(not (null? tal)))) ;; old experiment
                (let ((runable-tests (runs:runable-tests prereqs-not-met))) ;; SUSPICIOUS: Should look at more than just prereqs-not-met?
                  (if (null? runable-tests)
                      #f   ;; I think we are truly done here
                      (runs:loop-values newtal reg reglen regfull reruns)))
                ;;) ;;from old experiment
            ) ;; end if (or (not (null? reg))(not (null? tal)))
            ))))))

;; scan a list of tests looking to see if any are potentially runnable
;;
(define (runs:runable-tests tests)
  (filter (lambda (t)
	    (if (not (vector? t))
		t

	 ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	 ;;    - but only do that if resources exist to kick off the job
	 ;; EXPAND ITEMS
	 ((or (procedure? items)(eq? items 'have-procedure)) ;; BB - target vars are env vars here? to allow expansion of [items]\nsomething [system echo $SOMETARGVAR], which is wonky
	  (let ((can-run-more    (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs)))
	    (if (and (list? can-run-more)
		     (car can-run-more))
		(let ((loop-list (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmaps))) ;; itemized test expanded here
		  (if loop-list
		      (apply loop loop-list)))
		;; if can't run more just loop with next possible test
		(loop (car newtal)(cdr newtal) reg reruns))))
	    
	 ;; this case should not happen, added to help catch any bugs
	 ((and (list? items) itemdat)

    ;; we get here on "drop through". All done!
    (runs:run-post-hook run-id)
    (debug:print-info 1 *default-log-port* "All tests launched")))

(define (runs:calc-fails prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (member (db:test-get-state test) '("INCOMPLETE" "COMPLETED")) ;; TODO: pull from *common:stuff...*
		 (not (member (db:test-get-status test)
			      '("PASS" "WARN" "CHECK" "WAIVED" "SKIP")))))
	  prereqs-not-met))

(define (runs:calc-prereq-fail prereqs-not-met) ;; REMOVEME since NOT_STARTED/PREQ_FAIL is now COMPLETED/PREQ_FAIL
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (equal? (db:test-get-state test) "NOT_STARTED")
		 (not (member (db:test-get-status test)
			      '("n/a" "KEEP_TRYING")))))
	  prereqs-not-met))