Megatest

;;       (old-exit code)))

(define (stop-the-train)
  (thread-start! (make-thread (lambda ()
				(let loop ()
				  (if (and *toppath*
					   (file-exists? (conc *toppath*"/stop-the-train")))
				      (let* ((msg (conc "ERROR: found file "*toppath*"/stop-the-train, exiting immediately")))
					;; yes, print to current-output-port AND *default-log-port*, annoying but necessary I think
				      (begin
					(debug:print 0 *default-log-port* "ERROR: found file "*toppath*"/stop-the-train, exiting immediately")
					(print msg)
					(debug:print 0 *default-log-port* msg)
					(exit 1)))
				  (thread-sleep! 5)
				  (loop))))))

;; execute thunk, return value.  If exception thrown, trap exception, return #f, and emit nonfatal condition note to *default-log-port* .
;; arguments - thunk, message
(define (common:fail-safe thunk warning-message-on-exception)

  ;;
  ;; for the inmem approach (see dbmod.scm)
  ;; this is one db per server
  (inmem     #f)  ;; handle for the in memory copy
  (dbfile    #f)  ;; path to the db file on disk
  (dbfname   #f)  ;; short name of db file on disk (used to validate accessing correct db)
  (ondiskdb  #f)  ;; handle for the on-disk file
  (dbtmpname #f)  ;; path to db file in /tmp (non-imem method)
  (dbdat     #f)  ;; create a dbdat for the downstream calls such as db:with-db
  (last-update 0)
  (sync-proc #f)
  )

;; NOTE: Need one dbr:subdb per main.db, 1.db ...
;;

			  (string->number res)
			  #f)))
          (if newres
              newres
              res))
        res)))

;; timestring+identifier+payload
;; locks are unique on identifier, payload is informational
(define (db:extract-time-identifier instr)
  (let ((tokens (string-split instr "+")))
    (match tokens
      ((t i)(cons (string->number t) i))
      ((t)  (cons (string->number t) #f))
      (else
       (assert #f "FATAL: db:extract-time-identifier handed bad data "instr)))))

;; transaction protected lock aquisition
;; either:
;;    fails    returns  (#f . lock-creation-time)
;;    succeeds (returns (#t . lock-creation-time)
;;    fails    returns  (#f lock-creation-time identifier)
;;    succeeds (returns (#t lock-creation-time identifier)
;; use (db:no-sync-del! db keyname) to release the lock
;;
(define (db:no-sync-get-lock-with-id db keyname identifier)
  (sqlite3:with-transaction
   db
   (lambda ()
     (condition-case
      (let* ((curr-val (db:no-sync-get/default db keyname #f)))
	(if curr-val
	    (match (db:extract-time-identifier curr-val)
	    (match (db:extract-time-identifier curr-val) ;; result->timestamp, identifier
	       ((timestamp ident)
		(if (equal? ident identifier)
		    #t     ;; this *is* my lock
		    #f))   ;; nope, not my lock
	       (else #f))  ;; nope, not my lock
	    (let ((lock-value (if identifier
		    (cons #t timestamp)    ;; this *is* my lock
		    (cons #f timestamp)))  ;; nope, not my lock
	       (else (cons #f #f)))  ;; nope, not my lock
	    (let ((curr-sec (current-seconds))
		  (lock-value (if identifier
				  (conc (current-seconds)"+"identifier)
				  (current-seconds))))
	      (sqlite3:execute db "INSERT OR REPLACE INTO no_sync_metadat (var,val) VALUES(?,?);" keyname lock-value)
	      #t)))
	      (cons #t curr-sec))))
      (exn (io-error)  (dbfile:print-err "ERROR: i/o error with no-sync db. Check permissions, disk space etc. and try again."))
      (exn (corrupt)   (dbfile:print-err "ERROR: database no-sync db is corrupt. Repair it to proceed."))
      (exn (busy)      (dbfile:print-err "ERROR: database no-sync db is locked. Try copying to another location, remove original and copy back."))
      (exn (permission)(dbfile:print-err "ERROR: database no-sync db has some permissions problem."))
      (exn () ;; (status done) ;; I don't know how to detect status done but no data!
	   (dbfile:print-err "ERROR: Unknown error with database no-sync db message: exn="(condition->list exn)", \n"
			     ((condition-property-accessor 'exn 'message) exn))

(module dbmod
	*
	
(import scheme
	chicken
	data-structures
	extras
	files

	(prefix sqlite3 sqlite3:)
	matchable
	posix
	typed-records
	srfi-1
	srfi-18
	srfi-69

	commonmod

	 (dbdat     (dbmod:open-db dbstruct run-id (dbfile:db-init-proc)))
	 (dbh       (dbr:dbdat-dbh dbdat)) ;; this will be the inmem handle
	 (dbfile    (dbr:dbdat-dbfile dbdat)))
    ;; if nfs mode do a sync if delta > 2
    (let* ((last-update (dbr:dbstruct-last-update dbstruct))
	   (sync-proc   (dbr:dbstruct-sync-proc dbstruct))
	   (curr-secs   (current-seconds)))
      (if (> (- curr-secs last-update) 3)
      (if (> (- curr-secs last-update) 5)
	  (begin
	    (sync-proc last-update)

	    ;; MOVE THIS CALL TO INSIDE THE sync-proc CALL
	    (dbr:dbstruct-last-update-set! dbstruct curr-secs)
	    )))
    (assert (sqlite3:database? dbh) "FATAL: bad db handle in dbmod:with-db") 

			    (syncdir 'todisk))
  (let* ((dbstruct     (or dbstruct-in (make-dbr:dbstruct areapath: areapath)))
	 (dbfname      (or dbfname-in (dbmod:run-id->dbfname run-id)))
	 (dbpath       (dbmod:get-dbdir dbstruct))             ;; directory where all the .db files are kept
	 (dbfullname   (conc dbpath"/"dbfname)) ;; (dbmod:run-id->full-dbfname dbstruct run-id))
	 (dbexists     (file-exists? dbfullname))
	 (tmpdir       (conc "/tmp/"(current-user-name)))
	 (tmpdb        (let* ((fname (conc tmpdir"/" (string-translate areapath "/" ".")"-"(current-process-id)"-"dbfname)))
	 (tmpdb        (let* ((fname (conc tmpdir"/" (string-translate areapath "/" ".") ;; "-"(current-process-id)
					   "-"dbfname)))
			 (if (not (file-exists? tmpdir))(create-directory tmpdir))
			 ;; check if tmpdb already exists, either delete it or
			 ;; add something to the name
			 fname))
	 (inmem        (dbmod:open-inmem-db init-proc
					    (if (eq? (dbfile:cache-method) 'inmem)
						#f
						tmpdb)
					    ;; (if (eq? (dbfile:cache-method) 'inmem)
					    ;; 	#f
					    tmpdb
					    ;; )
					    ))
	 (write-access (file-write-access? dbpath))
	 (db           (dbmod:safely-open-db dbfullname init-proc write-access))
	 (tables       (db:sync-all-tables-list keys)))
    (if (not (and (sqlite3:database? inmem)
		  (sqlite3:database? db)))
	(begin
	  (debug:print 0 *default-log-port* "ERROR: Failed to properly open "dbfname-in", exiting immediately.")
	  (exit)))
    ;; (assert (sqlite3:database? inmem) "FATAL: open-dbmoddb: inmem is not a db")
	  (exit)))    ;; (assert (sqlite3:database? inmem) "FATAL: open-dbmoddb: inmem is not a db")
    ;; (assert (sqlite3:database? db) "FATAL:  open-dbmoddb: db is not a db")
    (dbr:dbstruct-inmem-set!     dbstruct inmem)
    (dbr:dbstruct-ondiskdb-set!  dbstruct db)
    (dbr:dbstruct-dbfile-set!    dbstruct dbfullname)
    (dbr:dbstruct-dbtmpname-set! dbstruct tmpdb)
    (dbr:dbstruct-dbfname-set!   dbstruct dbfname)
    (dbr:dbstruct-sync-proc-set! dbstruct
				 (lambda (last-update)
				   (if *sync-in-progress*
				       (debug:print 3 *default-log-port* "WARNING: overlapping calls to sync to disk")
				       (begin
					 (mutex-lock! *db-with-db-mutex*) ;; this mutex is used when overloaded or during a query that modifies the db
				       (let* ((sync-cmd (conc "megatest -db2db -from "tmpdb" -to "dbfullname"&")))
					 ;; (mutex-lock! *db-with-db-mutex*) ;; this mutex is used when overloaded or during a query that modifies the db
					 (set! *sync-in-progress* #t)
					 ;; (if (eq? (dbfile:cache-method) 'inmem)
					 (dbmod:sync-gasket tables last-update inmem db
							    dbfullname syncdir)
					 (mutex-unlock! *db-with-db-mutex*)
					 (thread-sleep! 0.5) ;; ensure at least 1/2 second down time between sync calls
					 (set! *sync-in-progress* #f)))))
					 ;;     (dbmod:sync-gasket tables last-update inmem db
					 ;; 			dbfullname syncdir keys)
					 (thread-start! (make-thread
							 (lambda ()
							   (debug:print-info "Running "sync-cmd)
							   (system sync-cmd)
							   ;; (mutex-unlock! *db-with-db-mutex*)
							   ;; (thread-sleep! 0.5) ;; ensure at least 1/2 second down time between sync calls
							   (set! *sync-in-progress* #f))))
					 ))))
    ;; (dbmod:sync-tables tables #f db inmem)
    ;; (if db
    (dbmod:sync-gasket tables #f inmem db dbfullname 'fromdest) ;; ) ;; load into inmem
    (dbmod:sync-gasket tables #f inmem db dbfullname 'fromdest keys) ;; ) ;; load into inmem
    (dbr:dbstruct-last-update-set! dbstruct (current-seconds)) ;; should this be offset back in time by one second?
    dbstruct))

;;    (if (eq? syncdir 'todisk) ;; sync to disk normally, sync from in dashboard
;;        (dbmod:sync-tables tables last-update inmem db)
;;        (dbmod:sync-tables tables last-update db inmem))))

;; direction: 'fromdest 'todest
;;
(define (dbmod:sync-gasket tables last-update inmem dbh dbfname direction)
(define (dbmod:sync-gasket tables last-update inmem dbh dbfname direction keys)
  (assert (sqlite3:database? inmem) "FATAL: sync-gasket: inmem is not a db")
  (assert (sqlite3:database? inmem) "FATAL: sync-gasket: dbh is not a db")
  (debug:print-info 0 *default-log-port* "dbmod:sync-gasket called with sync-method="(dbfile:sync-method))
  (case (dbfile:sync-method)
    ((none) #f)
    ((attach)
     (dbmod:attach-sync tables inmem dbfname direction))
    ((newsync)
     (dbmod:new-sync tables inmem dbh dbfname direction))
    (else
     (case direction
       ((todisk)
	(dbmod:sync-tables tables last-update inmem dbh)
	(dbmod:sync-tables tables last-update keys inmem dbh)
	)
       (else
	(dbmod:sync-tables tables last-update dbh inmem))))))
	(dbmod:sync-tables tables last-update keys dbh inmem))))))

(define (dbmod:close-db dbstruct)
  ;; do final sync to disk file
  ;; (do-sync ...)
  (sqlite3:finalize! (dbr:dbstruct-ondiskdb dbstruct)))

;;======================================================================

;;
;; if last-update specified ("field-name" . time-in-seconds)
;;    then sync only records where field-name >= time-in-seconds
;;    IFF field-name exists
;;
;; Use (db:sync-all-tables-list keys) to get the tbls input
;;
(define (dbmod:sync-tables tbls last-update fromdb todb)
(define (dbmod:sync-tables tbls last-update keys fromdb todb)
  (debug:print-info 2 *default-log-port* "dbmod:sync-tables called, from: "fromdb", to: "todb)
  (assert (sqlite3:database? fromdb) "FATAL: dbmod:sync-tables called with fromdb not a database" fromdb)
  (assert (sqlite3:database? todb) "FATAL: dbmod:sync-tables called with fromdb not a database" todb)
  (let ((stmts       (make-hash-table)) ;; table-field => stmt
	(all-stmts   '())              ;; ( ( stmt1 value1 ) ( stml2 value2 ))
	(numrecs     (make-hash-table))
	(start-time  (current-milliseconds))

;; direction = fromdest, todest
;; mode = 'full, 'incr
;;
;; Idea: youngest in dest is last_update time
;;
(define (dbmod:new-sync tables dbh1 dbh2 destdbfile direction #!key
			   (mode 'full))
  (debug:print 0 *default-log-port* "Doing sync "direction" "destdbfile)
  (debug:print 0 *default-log-port* "Doing new-sync "direction" "destdbfile)
  (if (not (sqlite3:auto-committing? dbh1))
      (debug:print 0 *default-log-port* "Skipping sync due to transaction in flight.")
      (let* ((table-names  (map car tables))
	     (dest-exists  (file-exists? destdbfile)))
	(assert dest-exists "FATAL: sync called with non-existant file, "destdbfile)
	(for-each
	 (lambda (table)

		  (debug:print-info 0 *default-log-port* "Found old test in LAUNCHED state, test-id=" test-id
				    " 1 day since event_time marked")
                  (set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched)))))
	  stmth3
	  run-id))))
    (list incompleted oldlaunched toplevels)))

;;======================================================================
;; db to db sync
;;======================================================================
)

(define (dbmod:db-to-db-sync src-db dest-db last-update init-proc keys)
  (if (and (file-exists? src-db) ;; can't proceed without a source
	   (file-read-access? src-db))
      (let* ((have-dest     (file-exists? dest-db))
	     (dest-file-wr  (and have-dest
				 (file-write-access? dest-db))) ;; exists and writable
	     (dest-dir      (or (pathname-directory dest-db)
				"."))
	     (dest-dir-wr   (and (file-exists? dest-dir)
				 (file-write-access? dest-dir)))
	     (d-wr          (or (and have-dest
				     dest-file-wr)
				dest-dir-wr))
	     (copied        (if (and (not have-dest)
				     dest-dir-wr)
				(begin
				  (file-copy src-db dest-db)
				  #t)
				#f)))
	(if copied
	    (begin
	      (debug:print-info 0 *default-log-port* "db-to-db-sync done with file-copy")
	      #t)
	    (let* ((tables (db:sync-all-tables-list keys))
		   (sdb    (dbmod:safely-open-db src-db init-proc #t))
		   (ddb    (dbmod:safely-open-db dest-db init-proc d-wr))
		   (res    (dbmod:sync-gasket tables last-update sdb ddb dest-db 'todest keys)))
	      (sqlite3:finalize! sdb)
	      (sqlite3:finalize! ddb)
	      res)))
      #f))
)

		 )
              )


	      ;; for automated creation of the rollup html file this is a good place...
	      (if (not (equal? item-path ""))
		      (tests:summarize-items run-id test-id test-name #f))
	      ;; BUG was this meant to be the antecnt of the if above?
	      (tests:summarize-test run-id test-id)  ;; don't force - just update if no
              ;; Leave a .final-status file for the top level test
              (tests:save-final-status run-id test-id)
	      (rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id))) ;; end of let*

	    (mutex-unlock! m)
            (launch:end-of-run-check run-id )

	;; if have -append-config then read and append here
	(let ((cfname (args:get-arg "-append-config")))
	  (if (and cfname
		   (file-read-access? cfname))
	      (read-config cfname *configdat* #t))) ;; values are added to the hash, no need to do anything special.
	;; have config at this time, this is a good place to set params based on config file settings
	(let*  ((dbmode (configf:lookup *configdat* "setup" "dbcache-mode")))
	(let*  ((dbmode   (configf:lookup *configdat* "setup" "dbcache-mode"))
		(syncmode (configf:lookup *configdat* "setup" "sync-mode")))
	  (if dbmode
	      (begin
		(debug:print-info 0 *default-log-port* "Overriding dbmode to "dbmode)
		(dbcache-mode (string->symbol dbmode)))))
		(dbcache-mode (string->symbol dbmode))))
	  (if syncmode
	      (begin
		(debug:print-info 0 *default-log-port* "Overriding syncmode to "syncmode)
		(dbfile:sync-method (string->symbol syncmode)))))
	
	*toppath*)))


(define (get-best-disk confdat testconfig)
  (let* ((disks   (or (and testconfig (hash-table-ref/default testconfig "disks" #f))
		      (hash-table-ref/default confdat "disks" #f)))

  -list-run-time          : list time requered to complete runs. It supports following switches
                            -run-patt <patt> -target-patt <patt> -dumpmode <csv,json,plain-text>
  -list-test-time	  : list time requered to complete each test in a run. It following following arguments
                            -runname <patt> -target <patt> -dumpmode <csv,json,plain-text>
  -syscheck               : do some very basic checks; write access and space in tmp, home, runs, links and 
                            is $DISPLAY valid 
  -list-waivers           : dump waivers for specified target, runname, testpatt to stdout
  -db2db                  : sync db to db, use -from, -to for dbs, -period and -timeout for continuous sync

Diff report
  -diff-rep               : generate diff report (must include -src-target, -src-runname, -target, -runname
                                                  and either -diff-email or -diff-html)
  -src-target <target>
  -src-runname <target>
  -diff-email <emails>    : comma separated list of email addresses to send diff report

			":state"  
			"-state"
			":status"
			"-status"
			"-list-runs"
                        "-testdata-csv"
			"-testpatt"
                        "--modepatt"
                        ;; "--modepatt"
                        "-modepatt"
                        "-tagexpr"
			"-itempatt"
			"-setlog"
			"-set-toplog"
			"-runstep"
			"-logpro"
			"-m"
			"-rerun"

			"-days"
			"-rename-run"
			"-from"
			"-to"
			"-dest"
                        "-source" 
                        "-time-stamp" 
			;; values and messages
			":category"
			":variable"

			"-pathmod"
			"-env2file"
			"-envcap"
			"-envdelta"
			"-setvars"
			"-set-state-status"
			"-import-sexpr"
			"-period"  ;; sync period in seconds
			"-timeout" ;; exit sync if timeout in seconds exceeded since last change

                        ;; move runs stuff here
                        "-remove-keep"           
			"-set-run-status"
			"-age"

			;; archive 

			"-create-megatest-area"
			"-mark-incompletes"

			"-convert-to-norm"
			"-convert-to-old"
			"-import-megatest.db"
			"-sync-to-megatest.db"
			"-db2db"
                        "-sync-brute-force"
			"-logging"
			"-v" ;; verbose 2, more than normal (normal is 1)
			"-q" ;; quiet 0, errors/warnings only

                        "-diff-rep"

      (set! *didsomething* #t)))

(if (args:get-arg "-sync-to")
    (let ((toppath (launch:setup)))
      (tasks:sync-to-postgres *configdat* (args:get-arg "-sync-to"))
      (set! *didsomething* #t)))

;; use with -from and -to
;;
(if (args:get-arg "-db2db")
    (let* ((duh         (launch:setup))
	   (src-db      (args:get-arg "-from"))
	   (dest-db     (args:get-arg "-to"))
	   (sync-period (args:get-arg "-period"))    ;; NOT IMPLEMENTED YET
	   (sync-timeout (args:get-arg "-timeout"))  ;; NOT IMPLEMENTED YET
	   (lockfile    (conc dest-db".sync-lock"))
	   (keys        (db:get-keys #f))
	   )
      
      (if (and src-db dest-db)
	  (if (file-exists? src-db)
	      (if (file-exists? lockfile)
		  (debug:print 0 *default-log-port* "Lock "lockfile" exists, skipping sync...")
		  (begin
		    (with-output-to-file lockfile
		      (lambda ()
			(print (current-process-id))))
		    (debug:print-info 0 *default-log-port* "Attempting to sync data from "src-db" to "dest-db"...")
		    (if (not (file-exists? dest-db))
			(begin
			  (debug:print 0 *default-log-port* "Using copy to create "dest-db" from "src-db)
			  (file-copy src-db dest-db))
			(let ((res (dbmod:db-to-db-sync src-db dest-db 0 (dbfile:db-init-proc) keys)))
			  (if res
			      (debug:print-info 0 *default-log-port* "Synced " res " records from "src-db" to "dest-db)
			      (debug:print-info 0 *default-log-port* "No sync due to permissions or other issue."))))
		    (delete-file* lockfile)))
	      (debug:print 0 *default-log-port* "No sync due to unreadble or non-existant source file"src-db))
	  (debug:print 0 *default-log-port* "Usage for -db2db; -to and -from must be specified"))
      (set! *didsomething* #t)))

(if (args:get-arg "-list-test-time")
     (let* ((toppath (launch:setup))) 
     (task:get-test-times)  
     (set! *didsomething* #t)))

(if (args:get-arg "-list-run-time")
     (let* ((toppath (launch:setup))) 

	 (areapath     (tt-areapath ttdat))
	 (nosyncdbpath (conc areapath"/.mtdb"))
	 (cleanup (lambda ()
		    (if (tt-cleanup-proc ttdat)
			((tt-cleanup-proc ttdat)))
		    (dbfile:with-no-sync-db nosyncdbpath
					    (lambda (db)
					      (let* ((dbtmpname (dbr:dbstruct-dbtmpname dbstruct)))
						(debug:print-info 0 *default-log-port* "Running clean up, including removing db file "dbtmpname)
					      (db:no-sync-del! db dbfname))))))
						(db:no-sync-del! db dbfname)
						#;(if dbtmpname
						    (delete-file dbtmpname))))))))
    (set! *server-info* ttdat)
    (let loop ((count 0))
      (if (> count 240)
	  (begin
	    (debug:print 0 *default-log-port* "FATAL: Could not start a tcp server, giving up.")
	    (exit 1))
	  (if (not (tt-port ttdat)) ;; no connection yet

      (let* ((servers (tt:get-server-info-sorted ttdat dbfname))
	     (ok      (cond
		       ((null? servers) #f) ;; not ok
		       ((equal? (list-ref (car servers) 6) ;; compare the servinfofile
				(tt-servinf-file ttdat))
			(let* ((res (if db-locked-in
					#t
					(let* ((lock-result
					(let* ((success (dbfile:with-no-sync-db
							 nosyncdbpath
							 (lambda (db)
							   (db:no-sync-get-lock-with-id db dbfname (tt-servinf-file ttdat))))))
						(dbfile:with-no-sync-db
						 nosyncdbpath
						 (lambda (db)
						   (db:no-sync-get-lock-with-id db dbfname
										;; (tt-servinf-file ttdat)
										(dbr:dbstruct-dbtmpname dbstruct)
										))))
					       (success (car lock-result)))
					  (if success
					      (begin
						(tt-state-set! ttdat 'running)
						(debug:print 0 *default-log-port* "Got server lock for "
							     dbfname)
						(set! db-locked-in #t)
						#t)
					      (begin
						(debug:print 0 *default-log-port* "Failed to get server lock for "dbfname)
						#f))))))
			  (if (and res
				   (common:low-noise-print 120 "top server message"))
			  (if (and res (common:low-noise-print 120 "top server message"))
			      (debug:print-info 0 *default-log-port* "Keep running, I'm the top server for "
						dbfname" on "(tt-host ttdat)":"(tt-port ttdat)))
			  res))
		       (else
			(debug:print-info 0 *default-log-port* "I'm not the lead server: "servers)
			(let* ((leadsrv (car servers)))
			  (match leadsrv

				       (debug:print 0 *default-log-port* "I'm not the server but could not ping "host":"port", will try again.")
				       (thread-sleep! 1) ;; just because
				       #t)))))
			    (else ;; should never get here
			     (debug:print 0 *default-log-port* "BAD SERVER RECORD: "leadsrv)
			     (assert #f "Bad server record "leadsrv))))))))
	(if ok
	    ;; (if (> *api-process-request-count* 0) ;; have requests in flight
	    ;;	(tt-last-access-set! ttdat (current-seconds)))
	    (tt-last-access-set! ttdat *db-last-access*) ;; bit silly, just use db-last-access
	    (begin
	      (debug:print 0 *default-log-port* "Exiting immediately")
	      (cleanup)
	      (exit)))

	(let* ((last-update (dbr:dbstruct-last-update dbstruct))

  (let* ((areapath (tt-areapath ttdat))
	 (servdir  (tt:get-servinfo-dir areapath))
	 (host     (tt-host ttdat))
	 (port     (tt-port ttdat))
	 (servinf (conc servdir"/"host":"port"-"(current-process-id)":"dbfname))
	 (serv-id (tt:mk-signature areapath))
	 (clean-proc (lambda ()
		       (delete-file* servinf))))
		       (delete-file* servinf)
		       )))
    (assert (and host port) "FATAL: tt:create-server-registration-file called with no conn, dbfname="dbfname)
    (tt-cleanup-proc-set! ttdat clean-proc)
    (tt-servinf-file-set! ttdat servinf)
    (with-output-to-file servinf
      (lambda ()
	(print "SERVER STARTED: "host":"port" AT "(current-seconds)" server-id: "serv-id" pid: "(current-process-id)" dbfname: "dbfname)))
      serv-id))