Megatest

;;======================================================================
;; runs:run-tests is called from megatest.scm and itself
;;======================================================================
;;
;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.
;;              FIXME: error out if /patt specified
;;
;; this calls itself with run-count incremented up to the [setup]->runqueue number or 5
;;            
(define (runs:run-tests target runname test-patts user flags #!key (run-count 1)) ;; test-names
  (let* ((keys               (keys:config-get-fields *configdat*))
	 (keyvals            (keys:target->keyval keys target))
	 (run-id             (rmt:register-run keyvals runname "new" "n/a" user (args:get-arg "-contour")))  ;;  test-name)))
	 ;; (deferred          '()) ;; delay running these since they have a waiton clause
	 (runconfigf         (conc  *toppath* "/runconfigs.config"))
         (dbfile             (conc  *toppath* "/megatest.db"))
         (readonly-mode      (not (file-write-access? dbfile)))
	 (test-records       (make-hash-table))
	 ;; need to process runconfigs before generating these lists
	 (all-tests-registry #f)  ;; (tests:get-all)) ;; (tests:get-valid-tests (make-hash-table) test-search-path)) ;; all valid tests to check waiton names
	 (all-test-names     #f)  ;; (hash-table-keys all-tests-registry))
	 (test-names         #f)  ;; Generated by a call to (tests:filter-test-names all-test-names test-patts))
	 (required-tests     #f)  ;; Put fully qualified test/testpath names in this list to be done
         (waitors-upon       (make-hash-table)) ;; given a test, return list of tests waiting upon this test.
	 (task-key           (conc (hash-table->alist flags) " " (get-host-name) " " (current-process-id)))
	 ;; (tdbdat             (tasks:open-db))
	 (config-reruns      (let ((x (configf:lookup *configdat* "setup" "reruns")))
	 (config-reruns      (let ((x (configf:lookup *configdat* "setup" "reruns"))) ;; run tests up to this many times if status is in -rerun list or [setup]->allow-auto-rerun list
			       (if x (string->number x) #f)))
	 (allowed-tests      #f)
	 (runconf            #f)
	 (cache-files        (launch:get-cache-file-paths #f (common:get-toppath *toppath* ) target))
	 (runstart-time      (current-seconds)))

    ;; check if readonly

	    
	    ;; if run-count > 0 call, set -preclean and -rerun STUCK/DEAD
	    (if (> run-count 0) ;; handle reruns
		(begin
		  (if (not (hash-table-ref/default flags "-preclean" #f))
		      (hash-table-set! flags "-preclean" #t))
		  (if (not (hash-table-ref/default flags "-rerun" #f))
		      (hash-table-set! flags "-rerun" "STUCK/DEAD,n/a,ZERO_ITEMS"))
		      (hash-table-set! flags "-rerun" "ABORT,DEAD,STUCK/DEAD,n/a,ZERO_ITEMS"))
		  ;; recursive call to self
		  (debug:print-info 0 *default-log-port* "Re-running tests with status " (hash-table-ref/default flags "-rerun" ""))
		  (runs:run-tests target runname test-patts user flags run-count: (- run-count 1)))
                (launch:end-of-run-check run-id)))
	  (debug:print-info 0 *default-log-port* "No tests to run")))
    (debug:print-info 4 *default-log-port* "All done by here")
    ;; TODO: try putting post hook call here
      
    ;  (debug:print-info 2 *default-log-port* " run-count " run-count)

		(loop (car newtal)(cdr newtal) reg reruns))))
         
	 ;; this case should not happen, added to help catch any bugs
	 ((and (list? items) itemdat)
          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-5")
	  (debug:print-error 0 *default-log-port* "Should not have a list of items in a test and the itemspath set - please report this")
	  (exit 1))
	 ((not (null? reruns))
	 ((not (null? reruns)) ;; PROCESS THE RERUNS HERE
          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-6")
	  (let* ((newlst (tests:filter-non-runnable run-id tal test-records)) ;; i.e. not FAIL, WAIVED, INCOMPLETE, PASS, KILLED,
	  (let* ((newlst (tests:filter-non-runnable run-id tal test-records )) ;; i.e. not FAIL, WAIVED, INCOMPLETE, PASS, KILLED,
		 (junked (lset-difference equal? tal newlst)))
	    (debug:print-info 4 *default-log-port* "full drop through, if reruns is less than 100 we will force retry them, reruns=" reruns ", tal=" tal)
	    (if (< num-retries max-retries)
		(set! newlst (append reruns newlst)))
	    (set! num-retries (+ num-retries 1))
	    ;; (thread-sleep! (+ 1 *global-delta*))
	    (if (not (null? newlst))
		(begin
		  (debug:print-info 0 *default-log-port* "Re-running tests " (string-intersperse newlst " "))
		;; since reruns have been tacked on to newlst create new reruns from junked
		(loop (car newlst)(cdr newlst) reg (delete-duplicates junked)))))
		  ;; since reruns have been tacked on to newlst create new reruns from junked
		  (loop (car newlst)(cdr newlst) reg (delete-duplicates junked))))))
	 ((not (null? tal))
          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-7")
	  (debug:print-info 4 *default-log-port* "I'm pretty sure I shouldn't get here."))
	 ((not (null? reg)) ;; could we get here with leftovers?
          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-8")
	  (debug:print-info 0 *default-log-port* "Have leftovers!")
	  (loop (car reg)(cdr reg) '() reruns))

			 (must-rerun (member (test:get-status testdat) rerunlst)))
		    (debug:print-info 3 *default-log-port* "-rerun list: " rerun ", test-status: " (test:get-status testdat)", must-rerun: " must-rerun)
		    must-rerun))
	     (debug:print-info 2 *default-log-port* "Rerun forced for test " test-name "/" item-path)
	     (set! runflag #t)
             (debug:print-info 2 *default-log-port* "Calling rerun hook")
             (runs:rerun-hook test-id new-test-path testdat rerun)
	     ;; set the test up to be re-run by changing to NOT_STARTED
	     (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" (conc "RERUN_NEEDED_" config-reruns) "Test can be re-run")
             )
             

	    
            ;; -keepgoing, do not rerun FAIL
	    ((and keepgoing
		  (member (test:get-status testdat) '("FAIL")))

		 (map (lambda (s)
			(string-substitute "\"" "" s #t))
		      (string-split inl)))
	       data)))))

;; for each test:
;;   
(define (tests:filter-non-runnable run-id testkeynames testrecordshash)
(define (tests:filter-non-runnable run-id testkeynames testrecordshash #!optional (override-statuses '()))
  (let ((runnables '()))
    (for-each
     (lambda (testkeyname)
       (let* ((test-record (hash-table-ref testrecordshash testkeyname))
	      (test-name   (tests:testqueue-get-testname  test-record))
	      (itemdat     (tests:testqueue-get-itemdat   test-record))
	      (item-path   (tests:testqueue-get-item_path test-record))
	      (waitons     (tests:testqueue-get-waitons   test-record))
	      (keep-test   #t)
	      (test-id     (rmt:get-test-id run-id test-name item-path))
	      (tdat        (rmt:get-testinfo-state-status run-id test-id))) ;; (cdb:get-test-info-by-id *runremote* test-id)))
	 (if tdat
	     (begin
	       ;; Look at the test state and status
	       (if (or (and (member (db:test-get-status tdat) 
				    '("PASS" "WARN" "WAIVED" "CHECK" "SKIP"))
			    (not (member (db:test-get-status tdat)
					 override-status))
			    (equal? (db:test-get-state tdat) "COMPLETED"))
		       (member (db:test-get-state tdat)
				    '("INCOMPLETE" "KILLED")))
		   (set! keep-test #f))

	       ;; examine waitons for any fails. If it is FAIL or INCOMPLETE then eliminate this test
	       ;; from the runnable list